412 jobs found

Job Description Job Description PROMAN Staffing has partnered with a well-known engineered industrial components and exhaust systems manufacturing company in Statesville, NC. We are now hiring Machine Operators who are team players, versatile, and dependable! Pay: $18.00+ per hour based on experience Job description: MACHINE OPERATOR Schedule: 1st shift Monday - Friday Overtime Saturdays 5:00am-11:00am Hours: 5:00am-3:30pm JOB DESCRIPTION: Learning how to operate various types of machinery for producing exhaust systems. Reading previously prepared setup sheets/Bend data sheets for individual parts and ensuring that set-up follows the proper setting on the equipment. Conducting quality inspections as required by the written Quality Procedures. Completing records of production. Moving parts to the subsequent operation. Recording scrap or rework reasons Following procedures consistently to obtain repeatability. Participating in team meetings seeking continuous improvements for the operation. Operating hand jacks. Working Conditions: Non-temperature controlled environment. Steel toed shoes are required. Safety glasses, hearing protection is available. Work gloves, when required, are furnished. Job Requirements: Training and experience - Demonstrated mechanical aptitude, proficiency in shop math (fractions, decimals, metric), ability to read and follow specific routing instructions, ability to read and understand setup instructions, ability to read blueprints, proficiency in the use of appropriate measuring instruments (tape measure, dial calipers, micrometers), ability to check quality of parts against templates. Physical requirements - Able to stand for 10 hour shift. Able to bend, twist, stoop to remove parts from baskets and lift to work area. Able to load parts into work area and completed baskets without damaging the part. Good hand and eye coordination. Tools - normal hand tools necessary to make minor adjustments to machines such as Allen wrenches, pilers and adjustable wrenches, ball peen hammer, tape measure and scale, and possibly 0" - 3" calipers. Requirements: 1 Year Machine Operator experience required, previous metal work experience a plus. Must be able to read blue prints, and be proficient with tape measure. Physical ability to stand, bend, squat, stoop, and lift 10 hours per day.

Job Description Job Description Hiring Immediately! A bit about the role: If you are the go-to problem solver , have a technical aptitude, and are looking to grow your career with a well-known company, this is the role for you! As a Machine Operator Specialist you'll have the opportunity to use your mechanical skills to play a crucial role on our manufacturing team - and you'll only work 3-4 days per week! We only work 3-4 days a week! Our facilities operate four different schedules consisting of 12-hour shifts. We are currently hiring for the following shifts: 2nd Shift: Mon - Thursday 4pm - 4am (+$1/hr. shift diff.) 3rd shift: Thurs - Sun (4am - 4pm (+$1/hr. shift diff.) 4th Shift: Thurs - Sun 4pm - 4am (+$2/hr. shift diff) Starting Pay: $22/hr. Copy and paste the links below to learn more about: Our Equipment and Production Floor - What You'll Do Here: Operate and Maintain Advanced Equipment: Expertly manage a variety of advanced equipment including but not limited to digital presses, bindery equipment, HP Indigo, HP Inkjet Web Press T485, Xerox iGen, Epson, Lasermax, UV Coaters, and other specialized machinery. Perform Advanced Maintenance: Conduct comprehensive routine and preventive maintenance, including intricate troubleshooting to uphold the highest quality standards and ensure equipment is always in optimal working condition. Proactively Address Issues: Identify and make necessary adjustments, escalating complex issues to appropriate personnel when required. Collaborate and Communicate: Effectively interact with supervisors, technical support, and other team members to ensure seamless operations and swift resolution of issues. Serve as Equipment Owner: Provide technical support, perform pit stops, and carry out preventative maintenance unassisted. Mentorship and Training: Provide training and mentorship to Machine Operators to enhance team skills and knowledge. Critical Issue Escalation: Escalate critical equipment issues and collaborate with cross-functional partners to develop solutions. Operational Versatility: Operate bindery, finishing, and other production equipment, and fill in for Lead Operators as needed. Safety Committee Participation: Actively participate in the Safety Committee to promote and maintain workplace safety standards. Implement Best Practices: Develop and implement operational procedures to optimize equipment performance and efficiency. Ensure Safety and Compliance: Strictly adhere to safety and OSHA standards, maintaining confidentiality and complying with the company's security policies concerning sensitive information. The Skills You'll Bring: Extensive Experience: 7+ years of experience or equivalent experience operating high-speed machinery in high-volume, repetitive manufacturing. Technical Proficiency: In-depth knowledge of digital printing and bindery processes, and a strong understanding of the technical aspects of the machinery used. Advanced Troubleshooting Skills: Expertise in diagnosing and resolving complex technical issues with minimal downtime. Ability to troubleshoot, diagnose, and repair equipment issues as well as perform and document routine preventative maintenance unassisted. Technical Principles: Experience with principles of pneumatics, mechanical systems, PLC, ACDC drives, multimeter basics, basic electricity & electronics, and Lock Out Tag Out. Attention to Detail: Exceptional attention to detail with a methodical, procedure-oriented approach to tasks and affinity for quality control purposes. Quality and Customer Focus: Quality-minded and customer-focused to ensure the production of high-quality products. Ability to match or detect subtle differences between colors, including shades of color and brightness. Versatility and Physical Stamina: Ability to stand for extended periods, lift up to 50 lbs., and maintain mobility to crouch, kneel, reach, bend, and perform repetitive actions with hands and arms. Willingness and ability to work across various Production Departments on the Manufacturing floor as business needs dictate. Preferred Skills: Proficiency in operating bindery and finishing equipment (including Muller Martini) and digital print/press equipment (including HP Indigo). Why You'll Love Working at Shutterfly: Competitive hourly pay and regular opportunity for Overtime Competitive Benefits starting on your first day of employment (Health, Vision, Dental, and more) Paid Time Off (3 weeks accrued per year) & Paid Holidays On-the-job training and career development Health & Safety is our top priority Annual Performance Reviews with opportunity for pay increases Climate controlled, state-of-the-art facilities On-site amenities include a gym, game room, free beverages, etc. Up to $2,500 in free Shutterfly merchandise and huge discounts At Shutterfly, we make life's experiences unforgettable. We believe there is extraordinary power in self-expression. That's why our family of brands helps customers create products and capture moments that reflect who they uniquely are. Supporting a diverse and inclusive workforce is important to Shutterfly not only because it directly reflects our value of Embracing our Differences, but also because it's the right thing to do for our business and for our people. Learn more about our commitment to Diversity, Equity and Inclusion at Shutterfly DE&I. This position will accept applications on an ongoing basis until filled.

Job Description Job Description Under the direction of the Production Manager supports department efforts to assure continuous operation of product manufacturing by performing the following duties personally or through department production employees. Essential duties and responsibilities include the following, other duties may be assigned. Responsibilities: Understand all aspects and operating parameters of the machine Understand the water system, dryers and loaders Perform set-up/changeover Prepare and install all dies and spreader blocks Prepare all resin mixes Start-up and Shut-Down of all machinery Clean hoppers, dies, ovens, saws and other equipment Accurately complete all reporting paperwork Follow all safety rules, regulations and procedures Identify, measure, and label acceptable finished product Produce finished product within specification Various machine operator positions are available from entry level to advance. Press Operator Sheet Extrusion Operator Susta Extrusion Operator The open positions operate on a 12-hour shift (6 pm - 6 am) (2-2-3 schedule). A competitive wage and benefits package with a $1.00 shift premium for all hours worked 6 pm-6 am.

Job Description Job Description We are seeking an Automated Machine Operator to join our team! You will help oversee operational activities and ensure excellent quality control. Responsibilities: Run and Maintain various automated bonding, trimming and cutting machines Troubleshoot and adjust any alignment concerns Load and unload equipment and materials Conduct routine preventive maintenance on machines by schedule Log and record readings for equipment and procedures Data entry for part traceability Maintain a weekly production schedule Qualifications: Strong attention to detail Previous experience operating automated machinery Familiarity with manufacturing tools and equipment Strong troubleshooting and critical thinking skills Ability to handle physical workload Ability to thrive in a fast-paced environment Understands the importance of following all safety protocols general computer knowledge Company Description Manufacturing company located in Mooresville, NC; specializing in carbon fiber parts. At deBotech, Inc., we are devoted to continuously improving our processes and services to better satisfy our customers through QUALITY, RELIABILITY AND SERVICE. Company Description Manufacturing company located in Mooresville, NC; specializing in carbon fiber parts. At deBotech, Inc., we are devoted to continuously improving our processes and services to better satisfy our customers through QUALITY, RELIABILITY AND SERVICE.

Job Description Job Description We are currently seeking reliable and motivated Machine Operators to join our production team. We have openings for 8-hour day shifts, 12-hour day shifts, and 12-hour night shifts in a fast-paced manufacturing environment. Position Responsibilities: Operate and monitor production equipment safely and efficiently. Maintain product quality standards and production targets. Perform routine equipment checks and basic troubleshooting. Follow all safety procedures and company policies. Keep work areas clean and organized. Complete production documentation accurately. Qualifications: Manufacturing or machine operation experience preferred. Ability to work 8 or 12-hour shifts, including weekends as scheduled. Strong attention to detail and commitment to safety. Ability to lift, stand, and work in a production environment for extended periods. Dependable attendance and strong work ethic. What We Offer: Competitive pay base. Day and night shift opportunities. Training and advancement opportunities. Benefits package available once you are hired on. If you are a hardworking individual looking to build a career in manufacturing, we encourage you to apply today. Company Description At Catawba Valley Staffing, we are really proud to have so many referrals and so many employees who return to us for the next career move. We value the opportunity to search for jobs specific to the skillset, experience, and desires of candidates we work with. Our employees are valued and we are here to support them 24/7/365. We offer benefits including vacation pay, holiday pay, health insurance, and 401(k) options. Apply now, call us, or come see us and let us work for you and be your hiring link! Proudly local western NC owned and woman owned since 1999. Company Description At Catawba Valley Staffing, we are really proud to have so many referrals and so many employees who return to us for the next career move. We value the opportunity to search for jobs specific to the skillset, experience, and desires of candidates we work with. Our employees are valued and we are here to support them 24/7/365. We offer benefits including vacation pay, holiday pay, health insurance, and 401(k) options. Apply now, call us, or come see us and let us work for you and be your hiring link! Proudly local western NC owned and woman owned since 1999.

Job Description Job Description JOB TITLE: Cutter Operator DEPARTMENT: Production REPORTS TO: Bindery Supervisor POSITION SUMMARY Set up, operate and maintain a machine to cut preparatory paper stock and finished products. DUTIES AND RESPONSIBILITIES •Review specifications to determine page sequence, type of fold and page or sheet size. •Measure from edge of sheet using scale to determine incremental cutting positions from guide. •Enter cutting positions in proper order into computer memory. •Remove sheets of printed or unprinted paper stack from the load and place them on the cutter bed. Jog and align sheets against the cutter guide in preparation for cutting. •Activate computer to move sheets into first cut position. Activate double hand switches to begin cutting operation. •Examine cut material for any imperfections and adjust computer program as needed. •Remove finished or pre-finished material from the cutter bed and stack on pallets for shipment to the customer or next operation. •Record job information on job jackets and production sheets. •Change knives and lubricate as needed as recommended by manufacturers specifications. •Maintain good operational conditions on the machine and follow maintenance schedule provided by the Plant Manager to keep machine in best operating condition. Report any needed repairs or malfunctions to the Plant Manager and the Bindery Supervisor. •Ensures that their work area and the rest of the bindery remain clean and tidy. •Adheres to company policies and procedures, and abides by safety regulations. SKILLS, ABILITIES, WORKING CONDITIONS •High school graduate or equivalent and minimum 3 years experience. •Perform basic mathematical calculations. •Ability to read and understand written and verbal instructions, Job Jackets, press imposition and rule-up sheets. •Must be mechanically inclined. •Stand and walk 95% of the time. (Closed toed shoes required.) •Extensive lifting and bending actions. •Physically capable of lifting up to 75lbs. (Back braces provided upon request.) •Manufacturing environment with noise exposure to varying levels. (Hearing protection provided upon request.) REPORTING RELATIONSHIPS •Reports to the Bindery Supervisor. •Supervises Bindery Helpers working on the cutter. •Internal contacts include other Operators, Bindery Helpers, Bindery Supervisor, Press and Prep designees, and Customer Service personnel. •No external contacts. Company Description Print Management Group is a family owned custom offset printer located in Charlotte, NC. Company Description Print Management Group is a family owned custom offset printer located in Charlotte, NC.

Job Description Job Description Position: Production Operator I Department: Manufacturing Reports To: Production Supervisor Status: Non-Exempt Schedule: 12-hour shifts (day or night), rotating 2-2-3 schedule or based on production needs Apply / Contact Apply online: Job Summary The Production Operator I supports daily manufacturing operations on the production floor. This role ensures production targets are met while maintaining strong standards of safety, quality, and efficiency in a fast-paced environment. Key Responsibilities Operate and monitor production equipment to ensure efficient daily output Perform routine quality checks and visual inspections of products Complete required production and quality documentation accurately and on time Follow all safety rules, procedures, and workplace guidelines Maintain cleanliness and organization of assigned work areas Ensure materials are available to minimize downtime Assist with basic troubleshooting and production line support Support other areas of production as needed based on shift needs Maintain reliable attendance and punctuality Physical Requirements Ability to stand and walk for extended periods Ability to lift up to 50 lbs Work in a manufacturing environment with rotating shifts (days/nights) Qualifications Minimum: High school diploma or GED required No prior experience required

Job Description Job Description Our client, a manufacturer of plastic pipes and fittings, is looking for an Extrusion Operator - Shift Head to join their pipe extrusion department in Early Branch, SC. Hours: 6pm to 6am The Extrusion Operator - Shift Head is a key technical role responsible for operating extrusion lines and managing personnel during night shifts, ensuring continuous and seamless pipe production during plant operations, while collaborating closely with production management, pipe yard operations, and quality teams. The Extrusion Operator - Shift Head will manage shift personnel, organize roles during shifts, be responsible for the correct functioning of the production machinery, identify and correct production issues before they arise, and communicate with the production supervisor and the production manager. Managing and organizing shift production personnel under their supervision. Communicate effectively with pipe yard personnel during pipe production. Maintaining and operating plastic extrusion machinery. Handling raw material for extrusion operations. Setting up tools and calibrators. Starting up various profiles, ensuring start-up procedures are followed. Check the entire extruder before starting up to ensure no tools are left on the table. Making minor adjustments to equipment. Inspecting the line for quality products and early identification of issues. Communicating to production supervisor on maintenance, scrap, and shift change reports. Maintaining a clean work environment. Troubleshooting when issues arise. Tagging tools when removed to a line to indicate if maintenance is required. Continuous learning. Required Qualifications Previous experience in a continuous manufacturing process environment. Previous experience in setting up, troubleshooting, tear downs, and changeovers. Proven ability to follow standards, rules, policies, work instructions directions. Ability to operate equipment, mechanical aptitude, and reasoning ability. Understanding the importance of machine set-up and the need to manufacture premium quality products at every moment. Have a quality focus. Ability to use measuring equipment. Forklift license/experience. Strong math and computer skills. Ability to work with minimal supervision in a fast-paced manufacturing environment with frequently changing dynamics. Great organizational skills. Ability to follow workflow and schedules. Energetic, punctual, reliable, and able to work as a team player or independently. Good communication skills. Attention to detail.

Job Description Job Description We are currently seeking reliable and motivated Machine Operators to join our production team. We have openings for both 12-hour day shifts and 12-hour night shifts in a fast-paced manufacturing environment. Position Responsibilities: Operate and monitor production equipment safely and efficiently. Maintain product quality standards and production targets. Perform routine equipment checks and basic troubleshooting. Follow all safety procedures and company policies. Keep work areas clean and organized. Complete production documentation accurately. Qualifications: Manufacturing or machine operation experience preferred. Ability to work 12-hour shifts, including weekends as scheduled. Strong attention to detail and commitment to safety. Ability to lift, stand, and work in a production environment for extended periods. Dependable attendance and strong work ethic. Experience in any of the following areas is a plus: Creeler Slitter Cliver Sewer Roller Swatcher Extruder What We Offer: Competitive pay based on experience. Day and night shift opportunities. Training and advancement opportunities. Benefits package available once you are hired on If you are a hardworking individual looking to build a career in manufacturing, we encourage you to apply today. Company Description At Catawba Valley Staffing, we are really proud to have so many referrals and so many employees who return to us for the next career move. We value the opportunity to search for jobs specific to the skillset, experience, and desires of candidates we work with. Our employees are valued and we are here to support them 24/7/365. We offer benefits including vacation pay, holiday pay, health insurance, and 401(k) options. Apply now, call us, or come see us and let us work for you and be your hiring link! Proudly local western NC owned and woman owned since 1999. Company Description At Catawba Valley Staffing, we are really proud to have so many referrals and so many employees who return to us for the next career move. We value the opportunity to search for jobs specific to the skillset, experience, and desires of candidates we work with. Our employees are valued and we are here to support them 24/7/365. We offer benefits including vacation pay, holiday pay, health insurance, and 401(k) options. Apply now, call us, or come see us and let us work for you and be your hiring link! Proudly local western NC owned and woman owned since 1999.

Job Description Job Description Metglas, Inc., located in Conway, SC near Myrtle Beach, is a world leading producer of Amorphous Metal Ribbon. Since our company began in the 1970's, Metglas, Inc. (then Allied Signal located in Morristown, NJ) pioneered the development and production of amorphous metal, a unique alloy that exhibits a structure in which the metal atoms occur in a random pattern. The key to Metglas Inc.'s proprietary manufacturing process is the rapid-solidification of molten alloy at a rate of approximately one million degrees Celsius per second. We are currently hiring for Operator Repair (Melting, Casting) responsible for supporting amorphous metal casting operations by staging charge buckets of raw materials, charging the melting furnace, preparing & adding raw materials to the melting furnace, monitoring, deslagging, and sampling melt, and addressing melt issues, as needed. Essential Job Functions: Unload delivery trucks, move raw materials from inventory, and load charge buckets using forklift and/or crane Use computer system to enter and verify batch composition (i.e. alloy) Charge the melting furnace, adding charge buckets of raw materials using crane with hook and lifting magnet Monitor, take samples, and fine-tune melt chemistry Initiate pouring of molten metal into and back-pouring of melt out of holding furnace Address possible melt issues, including clogged pour spout, out-of-calibration lance, routine deslagging, and possible furnace over-heating, as needed Assist with changing spout, removing & replacing wheel house, emergency operations, and periodic breakdown/rebuilding of furnace (approximately every six months), which includes using jackhammers, lifting/carrying refractory brick, and working in confined spaces and at heights Raking and clean up of scrap and other ribbon from floors, machinery, and other work areas. Cleaning of work areas as assigned. Other duties as assigned. Note: This position supports both continuous and batch casting amorphous metal production lines Skills & Requirements: Safety mindset is your priority! Able and willing to wear proper safety attire (PPE: glasses, gloves, helmet, earplugs, steel toed boots, silver jacket, long sleeves and pants, etc.) Ability to read and understand measurements and directions Demonstrated mechanical aptitude Basic computer skills: ability to enter, retrieve, and evaluate data 2+ years Forklift experience High school graduate or equivalent 2+ years prior industrial/mechanical experience Prior work experience operating an overhead crane preferred Prior use of micrometer preferred Prior experience with feeler gauges and setting gaps preferred Able to lift, push, and pull up to 50lbs alone, and 51-100lbs with assistance Able to regularly perform work in areas of height up to 3 stories on safe and stable platforms Able and willing to work in a warm & hot inside environment, especially during summer months Must be clean shaven at all times to be able to wear a respirator when/if/as needed so that a respirator will seal around your mouth and nose; a trimmed goatee is okay. Able to work weekdays, weekends, and holidays per rotation schedule Able to work 12.15-hour rotating shifts Shifts run 6:45a-7p, and 6:45p-7a Rotation schedule is 2 days on, 2 days off, 3 days on, 2 days off, 2 days on 3 days off on one shift (6:45a-7pm or 6:45p-7a) for 2 weeks, then the same on the opposing shift Able to work overtime when/if/as needed. Time and a half pay after 40 hours/week Starting Rate: $17/hour (start as temp) 45 Days : $20.47 plus benefits (full-time employee) 6 Months : $21.49 plus benefits (full-time employee 12 Months : $23.64-$24.64 plus benefits (full-time employee) Must have acceptable attendance, job performance, and must be compliant in training and/or certifications at time intervals to move to next pay level. ITAR and EAR Disclosure Statement This position requires compliance with ITAR and/or EAR requirements. As a potential candidate for this position, you must be a "U.S. Person" (as defined under 22 C.F.R. 120.15 and 15 C.F.R. 772.1 ). The International Traffic in Arms Regulations ("ITAR") and the Export Administration Regulations ("EAR") are the primary export control regulations in the United States. The successful candidate will be required to show proof substantiating their status as a U.S. Person (US Citizen or US Permanent Resident/Green Card Holder). Full-Time Benefits Start upon full-time hire date and include: Medical Dental Vision 401k (8% company match after 12 months of full-time employment) Life Insurance AD&D Paid Time Off & Paid Holidays Pay Increase after 6 months and then again after 1 year Advancement/Career Path Opportunities Visit to learn more about us. Plant Address: 440 Allied Drive Conway, SC 29526 Shift: 6:45a-7p and 6:45p-7a Rotation schedule is 2 days on, 2 days off, 3 days on, 2 days off, 2 days on 3 days off on one shift (6:45-7pm or 6:45p-7a) for 2 weeks, then the same on the opposing shift.

Job Description Job Description Role and Responsibilities Must be able to run multiple machines at the same time Responsible for ensuring efficient production that conforms to quality standards Must have the ability to load and unload products into/out of the machine Report daily labor into the ERP system Responsible for general housekeeping in your work area Packing of finished goods Quantity reporting in the ERP system Qualifications and Education Requirements Minimum of 18 years old High school diploma, general education degree, or equivalent. Required 1-2 years of manufacturing experience. Must have a good attitude, great work ethic, ability to work with others, avoid conflict, and be able to commit to the work schedule. Must have their own reliable transportation Skills and sensitivity Working with metal, oils, coolant, anti-foam, and cleaning chemicals. No known allergies to any of the above Additional Notes 2nd Shift 5:00 PM - 3:30 AM Monday - Friday morning. Overtime is available on Fridays and Saturdays. Must be pre-approved by a supervisor. Availability to train on day shift (6:30 AM- 5:00 PM Monday - Thursday) for up to six weeks is a plus. Report to the Production Supervisor Consent to a 5-year background check and a 5-panel pre-employment drug screening. Results must be clear before reporting for the first day of employment, along with a signed acknowledgement of the Putsch Confidentiality Agreement and Drug & Alcohol Testing Policy. Putsch & Company, Inc. is an equal opportunity employer, and employment with the company is on an at-will basis. Company Description Since Putsch 's founding in Germany more than 150 years ago, we have honed our full-service approach to develop process solutions for customers in the North American sugar, filtration and separation, root vegetable processing, and glass industries. Putsch reduces complexity for customers through a wide range of integrated products and services. Company Description Since Putsch 's founding in Germany more than 150 years ago, we have honed our full-service approach to develop process solutions for customers in the North American sugar, filtration and separation, root vegetable processing, and glass industries. Putsch reduces complexity for customers through a wide range of integrated products and services.

Job Description Job Description Join our dynamic manufacturing team as a Manufacturing Associate / Machine Operator and become a vital part of producing high-quality products in a fast-paced, innovative environment. This role offers an exciting opportunity to develop hands-on mechanical skills, work with advanced tools and equipment, and contribute directly to the manufacturing process. We are committed to fostering a collaborative atmosphere where your skills are valued, and your growth is supported. Whether you're experienced in factory settings or eager to start your manufacturing career, this position provides a platform for professional development and meaningful work. Manufacturing Associate Shift 2nd shift: Mon-Friday 4:30pm-3am Manufacturing Associate Starting pay: Base: $16/hr + production bonus ($0 - $5/hr.) Average employee = $18/hr Manufacturing Associate Duties: Assist with assembly line tasks, including assembling components using hand tools and power tools to meet production targets. Conduct routine inspections of machinery and equipment, applying mechanical knowledge to identify issues and ensure smooth operation. Use hand tools and power tools to perform assembly, maintenance, or repairs as needed. Support warehouse activities by organizing inventory, preparing shipments, and managing stock levels efficiently. Follow safety protocols at all times, including proper handling of materials and equipment to maintain a safe working environment. Collaborate with team members on production goals, ensuring quality standards are met consistently. Manufacturing Associate Experience: Previous factory or manufacturing facility experience is highly preferred but not mandatory; training will be provided for motivated candidates. Mechanical knowledge or familiarity with assembly line processes enhances your ability to succeed in this role. Experience using hand tools and power tools in a manufacturing setting demonstrates technical aptitude. Warehouse experience that includes inventory management or shipping/receiving tasks is advantageous. Ability to work in a fast-paced environment while maintaining attention to detail and safety standards. Strong teamwork skills with excellent communication abilities to coordinate effectively with colleagues. This Manufacturing Associate position is paid and offers an engaging environment where your contributions directly impact our production success. We value energetic individuals eager to learn, grow their mechanical skills, and contribute to a thriving manufacturing operation! For immediate consideration apply today!

Job Description Job Description Brookshire area bottling company looking for machine operators at $19.50/HR plus OT experience is required Shifts: 2nd: 2pm to 10:30pm 3rd: 10pm - 6:30am Long-term, temp to perm positions Will hire after completion of required hours for candidates who are dependable and reliable. Flexible to work Saturdays required during the summer. Great benefits and raises once hired directly Looking for manufacturing, machine operating, and production experience in a fast-paced environment. Steel Toe Boots are REQUIRED No felonies in the past 7 years. Some misdemeanors OK. Long-term temp to perm for dependable and reliable employees. Company Description Paramount is committed to helping employers and candidates connect for suitable positions that are aligned with company and employee career goals alike. Company Description Paramount is committed to helping employers and candidates connect for suitable positions that are aligned with company and employee career goals alike.

Job Description Job Description We are seeking highly skilled Sewing Machine Operators with extensive experience in industrial sewing and precision manufacturing. This role requires advanced technical ability, strong attention to detail, and the ability to consistently produce high-quality work in a fast-paced production environment. Responsibilities Operate advanced industrial sewing machines (single-needle, double-needle, coverstitch, bartack, walking foot, etc.) Interpret pattens drawings and assembly instructions. Assemble complex components with strict quality and tolerance requirements Maintain consistent stitch quality, seam alignment, and finishing standards Conduct in-process and final quality inspection Train or assist less experienced operators when needed Maintain a clean, safe, and organized workstation Requied Qualifications Previous experience as a sewing machine operator required. Strong attention to detail and hand-eye coordination. Ability to work independently and as part of a team. Ability to sew at a consistent speed while maintaining quality Experience working to production quotas and quality standards

Job Description Job Description Job Summary: The SMT (Surface Mount Technology) Setup Operator is responsible for preparing and setting up SMT machines and related equipment for production runs. This role ensures accurate machine configuration, material placement, and feeder setup according to work orders and production schedules, enabling high-quality and efficient PCB assembly. Duties & Responsibilities: Set up SMT pick-and-place machines, screen printers, and reflow ovens according to job specifications and setup sheets. Load feeders with components and verify part numbers, orientations, and quantities. Perform first article inspections and verify setup accuracy using appropriate tools (e.g., AOI, magnifiers, calipers). Assist with machine changeovers, adjustments, and minor maintenance to maintain uptime and quality. Collaborate with SMT operators and technicians to resolve issues with feeder loading, component placement, and solder paste application. Maintain proper documentation of setups, materials used, and production data. Follow ESD, IPC, and company safety standards at all times. Support inventory control by returning unused materials to stock and reporting shortages or discrepancies. Contribute to continuous improvement efforts for quality and process efficiency. Requirements: High school diploma or GED required; technical certification a plus. 1-3 years of experience in electronics manufacturing or SMT assembly. Familiarity with SMT equipment from manufacturers such as Fuji, Panasonic, Juki, or ASM preferred. Understanding of electronic components, BOMs, and assembly drawings. Basic mechanical aptitude and ability to use hand tools. Attention to detail and commitment to quality. Ability to stand for extended periods and lift up to 30 lbs. Good communication and teamwork skills. Preferred Skills: Preferred experience with IPC-A-610, IPC-A-620, J-STD-001 standards Printed Circuit Board Assembly processes Electrostatic Discharge (ESD) handling controls. Working Hours: Normal work schedule is Monday through Thursday from 7am until 5:30pm with lunch and breaks. Some overtime may be required as needed. Company Description Assembly Technologies is a growing contract manufacturer specializing in electronics manufacturing. We help customers shape the world of tomorrow through our innovative electronic manufacturing solutions and unwavering commitment to quality. Company Description Assembly Technologies is a growing contract manufacturer specializing in electronics manufacturing. We help customers shape the world of tomorrow through our innovative electronic manufacturing solutions and unwavering commitment to quality.

Job Description Job Description The Greer Group has a great temp-to-hire Machine/Press operator opportunity for motivated individuals looking to start or grow a career in manufacturing! We're seeking dependable, detail-oriented candidates to join a growing production team. No manufacturing experience is required-we'll train the right individuals with a strong work ethic and a willingness to learn. Schedule 12-hour shifts: 7:00 AM - 7:00 PM 7:00 PM - 7:00 AM Every other weekend off, giving you more time to spend with family and friends! What You'll Do Inspect plastic parts to ensure they meet quality standards from presses during production Package finished products according to work instructions Operate and monitor production equipment Perform trimming, assembly, and other secondary operations Record production and scrap information Maintain a clean, organized, and safe work area Work as part of a team to meet production goals Qualifications No previous manufacturing experience required-paid training provided! Reliable attendance and a positive attitude Ability to stand for the duration of your shift Ability to lift up to 25 pounds Basic math and measurement skills Strong attention to detail Ability to identify product defects and color variations Willingness to work overtime as needed Why You'll Love This Opportunity Temp-to-hire position with long-term career potential Every other weekend off Paid training Clean, team-oriented manufacturing environment Opportunities for advancement Stable, full-time hours If you're dependable, eager to learn, and looking for a company where you can build a long-term career, we'd love to hear from you. Submit your resume to apply! Company Description The Greer Group, Inc., based in Raleigh, North Carolina, is a woman-owned staffing and recruiting company. Greer also operates satellite locations in North Carolina and growing in other states. The Greer Group, Inc. has the visionary goal of providing high-quality staffing solutions that are responsive, flexible and dependable. Since 1986, our staffing services have built solid work force partnerships with our clients specializing in the following areas: Manufacturing, Light Industrial, Administrative, Accounting/Finance, Government, Customer Service, Medical, Management, and other professional positions. Company Description The Greer Group, Inc., based in Raleigh, North Carolina, is a woman-owned staffing and recruiting company. Greer also operates satellite locations in North Carolina and growing in other states. The Greer Group, Inc. has the visionary goal of providing high-quality staffing solutions that are responsive, flexible and dependable. Since 1986, our staffing services have built solid work force partnerships with our clients specializing in the following areas: Manufacturing, Light Industrial, Administrative, Accounting/Finance, Government, Customer Service, Medical, Management, and other professional positions.

Job Description Job Description NOT ACCEPTING APPLICATIONS FROM RECRUITING OR STAFFING AGENCIES AT THIS TIME. Summary and Objective: The Setup & Machine Operator (SMO) is responsible for safely operating, setting up, monitoring, and maintaining manufacturing equipment used in pallet and custom wood packaging production. This role supports safe, stable, and efficient manufacturing operations by performing machine setup activities, verifying first-piece quality, monitoring machine performance, making operational adjustments, and conducting routine maintenance to minimize downtime and maintain consistent product quality. The SMO works with a variety of equipment ranging from cutting saws to advanced automated and robotic production systems, ensuring products meet customer specifications, quality standards, and production goals. This position requires mechanical aptitude, attention to detail, troubleshooting ability, and the ability to read and interpret production documentation, while contributing to continuous improvement and reliable manufacturing performance. Duties and Responsibilities: 1. Operate pallet manufacturing and wood packaging machinery safely and efficiently according to production schedules and work instructions. 2. Perform machine setup activities including loading programs, adjusting parameters, setting offsets, changing tooling, and preparing equipment for production runs. 3. Verify first-piece production meets quality and dimensional specifications before full production begins. 4. Monitor machine performance during operation and adjust maintain stable production and product quality. 5. Inspect finished products using measuring tools, gauges, and visual inspections to ensure compliance with customer and company standards. 6. Troubleshoot minor machine malfunctions, material flow issues, and operational problems to minimize downtime. 7. Perform routine preventive maintenance tasks including cleaning, lubricating, greasing, and basic equipment upkeep. 8. Assist with diagnosing equipment issues and communicate maintenance concerns to supervisors or maintenance personnel. 9. Read and interpret blueprints, run sheets, production orders, and other manufacturing documentation. 10. Maintain accurate production, quality, and downtime records as required. 11. Follow all company safety policies, lockout/tagout procedures, and safe operating practices. 12. Maintain clean and organized work areas to support safe and efficient operations. 13. Work collaboratively with production, maintenance, and quality personnel to meet operational goals. 14. Support continuous improvement initiatives related to safety, quality, productivity, and equipment performance. 15. Train or assist less experienced operators as needed based on skill level and experience. Minimum Required Qualifications: High school diploma or GED. Basic math skills including measurement calculations and counting. Ability to read standard and metric measuring tapes accurately. Mechanical aptitude and ability to learn machine setup and operation. Ability to read and follow production documents, work instructions, and safety procedures. Ability to safely operate manufacturing equipment and power tools. Strong attention to detail and quality standards. Ability to work in a fast-paced manufacturing environment. Ability to stand, walk, lift, bend, and perform repetitive physical tasks throughout the shift. Willingness to work overtime or flexible schedules as needed. Desired or Preferred Qualifications: Previous experience operating or setting up manufacturing equipment. Experience in pallet manufacturing, wood products, packaging, or industrial production environments. Familiarity with automated, robotic, or PLC-controlled machinery. Experience troubleshooting mechanical or operational equipment issues. Ability to read blueprints or technical drawings. Forklift certification or material handling experience. Preventive maintenance experience in a manufacturing environment. Knowledge of production quality inspection methods and measuring tools. Strong problem-solving and communication skills. Core Competencies: 1. Humility (lacks ego, team agenda, transparent, trainable, servant orientation) 2. Hungry (extra mile, internally driven, self-starter, excellence, passionate, change agent) 3. People Smart (interpersonal, group dynamics, influential, self-aware, motivating) 4. Competent (knows and can accomplish the task at hand - job, challenges, requirements) 5. Integrity (honest, reliable, transparent, strong character, loyal, righteous) Supervisory Responsibilities: This position has no direct supervisory responsibilities. However, it requires strong influential and leadership capabilities while working with company personnel at multiple levels, customers, and outside vendors. Physical Demands: The physical demands described here are representative of those required to successfully perform the essential functions of this position. Employees are regularly required to stand, walk, bend, stoop, reach, twist, and perform repetitive motions throughout the work shift. The role frequently requires lifting, carrying, pushing, and pulling materials, components, or equipment weighing up to 50 pounds, with occasional heavier lifting assisted by team members or mechanical devices. Employees must be able to use hands and fingers to operate machinery, tools, and measuring devices, and must possess adequate vision, hearing, and depth perception to safely monitor equipment operation and inspect product quality. Work Environment: This position works in a manufacturing and industrial production environment involving pallet and custom wood packaging equipment. Employees are regularly exposed to moving mechanical parts, saws, conveyors, automated machinery, vibration, wood dust, noise, and fluctuating temperatures depending on the season and facility conditions. Required personal protective equipment (PPE) may include safety glasses, hearing protection, gloves, steel-toe footwear, and other safety equipment as required. The work environment requires adherence to strict safety procedures and awareness around powered industrial equipment and automated production systems. Hours of Work: This is a full-time position that will be assigned to a certain shift (I.e., 1st, 2nd, 3rd, etc.). Days and hours of work are normally Monday through Friday, with an 8-to-12-hour work period per day. Exact time of day depends on the assigned shift. Some overtime, night, and/or weekend work may be required. Travel: This position may rarely require nominal or limited travel. AAP/EEO Statement: All recruiting, hiring, training, promotion, compensation, and other employment related decisions are provided fairly to all persons on an equal opportunity basis without regard to race, creed, color, religion, sex, age, national origin, disability, veteran status, genetic information, sexual orientation, marital status, or any other characteristic protected by law. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Company Description Tree Brand Packaging has been a leading manufacturer of custom wood pallets, crates, and packaging products for over 30 years. With eight locations across the Southeast (NC, SC, AL, TN, LA, TX), we serve a wide range of industries, including steel, automotive, telecommunications, material handling, military, aerospace, and import/export. Our innovative design solutions and commitment to exceptional customer service help meet the unique needs of our clients. We aim to build a great team, valued partnerships, address supply-chain challenges, and support customers in reducing costs and improving profitability. Company Description Tree Brand Packaging has been a leading manufacturer of custom wood pallets, crates, and packaging products for over 30 years. With eight locations across the Southeast (NC, SC, AL, TN, LA, TX), we serve a wide range of industries, including steel, automotive, telecommunications, material handling, military, aerospace, and import/export. Our innovative design solutions and commitment to exceptional customer service help meet the unique needs of our clients. We aim to build a great team, valued partnerships, address supply-chain challenges, and support customers in reducing costs and improving profitability.

Job Description Job Description About the Opportunity: ProTrade is seeking reliable and detail-oriented Machine Operators to work with a leading manufacturing company in North Carolina. This is an excellent opportunity for dependable individuals who enjoy hands-on work, stable hours, and a team-oriented environment. Responsibilities: Operate and monitor production machinery to ensure efficient and safe operation Perform basic machine adjustments and troubleshoot minor issues Inspect materials and finished products for quality standards Maintain a clean and organized work area throughout the shift Follow all safety protocols and production procedures Work collaboratively with team members and supervisors to meet production goals Requirements: Previous machine operating or manufacturing experience preferred (training available) Must be able to stand for long periods and lift up to 50 lbs Strong attention to detail and ability to follow instructions Reliable transportation and consistent attendance Benefits: Weekly pay Overtime opportunities Long term employment Supportive team environment Career growth opportunities with established manufacturing partners