18 jobs found

Job Title: Final Assembly SME Department : Final Assembly Classification: FLSA-Non-Exempt Job Family: Production Date: 03.6.26 Reports to : Final Assembly Supervisor Travel: 0% Employment Type : Hourly Expected Work Hours: 40+ Essential Functions Summary : The Final Assembly Subject Matter Expert (SME) is a highly skilled technical authority responsible for supporting the successful assembly of large-scale backup power systems. This role provides advanced hands-on expertise across all stages of Final Assembly-from Tank Prep to Engine Finish-ensuring work is executed safely, accurately, and in alignment with engineering specifications. The SME partners closely with engineering, quality, and production teams to resolve complex mechanical issues, refine standard procedures, and mentor Assembly Levels I-III. This position is ideal for seasoned mechanical professionals who combine deep technical knowledge with strong problem-solving, training, and collaboration skills. Accountabilities: Serve as the primary technical expert for Final Assembly processes, components, and systems. Provide advanced troubleshooting support for all enclosure, mechanical integration, and system installation issues. Guide team members across all Final Assembly levels, offering coaching and hands-on learning during complex tasks. Interpret and clarify engineering drawings, schematics, and technical documents for the broader team. Collaborate with engineering and quality teams to resolve non-conformances and mechanical design questions. Support workflow planning by advising on task sequencing, material requirements, and technical challenges. Conduct in-depth root-cause analysis for assembly issues and help develop corrective actions. Perform complex mechanical installations including exhaust, fuel, air, hydraulic, and structural components. Ensure all work meets engineering specifications, quality standards, and safety requirements. Validate quality checks, identify defects, and assist in finalizing quality plans. Train new hires and less experienced technicians on safe work practices, assembly techniques, and equipment operation. Operate forklifts, Telehandlers, scissor lifts, and large outdoor cranes (including Straddle Crane) as required. Safely perform oxyacetylene cutting, thin-cut operations, and other fabrication tasks. Participate in process improvement initiatives and provide expert input on best practices. Maintain awareness of workplace safety hazards, support safety call-outs, and report near misses. Promote and uphold a culture of accountability, safety, and continuous improvement. Assist in tracking technical risks, complex task durations, and material dependencies for project success. Maintain a clean, organized, and safe work environment. Perform other duties as assigned to support the Final Assembly team. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Attributes Safety First: Models safe behaviors and reinforces safety practices across all assembly levels. Have Humanity: Provides patient, respectful guidance and mentorship to team members. Be Transparent: Shares technical knowledge openly and communicates clearly on project or quality risks. Drive Innovation: Identifies opportunities to improve assembly methods, tools, and processes. Be Resilient: Navigates technical complexity and shifting priorities with confidence. Always Reliable: Known as the "go-to" expert for consistent and dependable technical support. Grit: Tackles demanding mechanical challenges with determination, pride, and ownership. Required Knowledge/Experience: High school diploma or equivalent required; associate degree or technical certification preferred. 5+ years of mechanical integration or related industry experience; experience mentoring others strongly preferred. Advanced technical proficiency in mechanical assembly, troubleshooting, and fabrication. Certification in forklift, overhead crane operations and Straddle Crane. Completion of JTS Leadership Basics and Problem Solving courses preferred. Proven ability to interpret blueprints, schematics, and engineering documentation. Demonstrated success in diagnosing and resolving complex mechanical issues. Reliable attendance and strong communication skills across departments. Must wear required PPE and adhere to all safety protocols. Work Environment and Physical Demands FLSA professional position; workload may exceed forty (40) hours per week depending on project requirements and customer deadlines. Primarily works in a manufacturing environment with exposure to indoor and outdoor conditions. Mobility: Ability to stand, kneel, stoop, or crouch for 8-10 hours per day. Manual Dexterity: Frequent use of hands for tools, assembly components, and precision tasks. Lifting: Ability to lift up to 50 lbs and push/pull up to 100 lbs following OSHA guidelines. Vision & Hearing: Must be able to see, hear, and communicate effectively in a manufacturing setting. Must pass a background check and drug screening. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Powered by JazzHR PIc5aa-0700

Description: Conduct Receiving, In-process and Final Inspections of Parts, Containers, Shelters, and Welded Structural Steel Fabricated Assemblies by performing Dimensional Inspection, VT, and NDE IAW AWS and Military Specifications. Perform wind, light, water leak, and paint performance tests. Witness electrical testing on all components. Sign each traveler line item as each task is performed and checked before movement to next process step to maintain traceability. Calibrate and Maintain TME and Manufacturing equipment. Complete Inspection Reports, and Sign Product Conformance Release Finished Product. Maintain Records of Acceptance to ISO9001 Standard. Report findings to supervisor. Job Summary: This position reports to the Quality Manager. The ideal candidate possesses a basic understanding of manufacturing, fabrication, assembly, and welding processes of Structural Steel Products. Ability to read different types of schematic drawings. Ability to use basic inspection equipment, prepare and write inspection reports. Responsibilities: Accident prevention - actively identify, correct and/or report safety hazards to prevent accidents. Actively identify and pursue cost reduction and efficiency/profit improvement opportunities. Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product. Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. Perform NDE of Welds and Welding Processes IAW AWS, Military, and Customer Specifications. Identifies raw material condition by inspecting materials samples; conducting inspections and physical tests of materials. Identifies in-process product condition by inspecting samples during productions process; conducting in-process inspections and physical tests. Determines disposition of finished products by collecting, classifying, analyzing, and interpreting production and quality data; determine product acceptability in comparison to specifications. Determines acceptability or rework by conducting inspections and physical tests of reworked product. Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data based. Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. Contributes to team effort by accomplishing related results as needed. Perform precision inspection with equipment such as calipers, micrometers, depth gauges, plug gauges and comparator Performs other duties as assigned Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: Health Insurance Dental Insurance Vision Insurance Basic and Voluntary Life Long-Term Disability Flexible Spending Accounts Employee Assistance Program Paid Time Off Paid Holidays, Bereavement, Jury Duty 401(k) with company match Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Salary Range: $45,000 - $60,000 Location: This position is onsite (non-remote) at the Company's corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company's normal 8:30am - 5:30pm hours of operation. Requirements: Experience: 3-5 years' work related experience. Education: High school diploma or equivalent. ASQ or AWS Certifications helpful. PI5bdd00799cdd-5106

Description: The Post Processing Manager position directs and manages post-processing plant operations with overall responsibilities for production, maintenance, quality, and other production-related activities within these departments. Assure compliance to NADCAP quality standards and processes. Essential Duties and Responsibilities Ensure completion of product in accordance with applicable company and customer requirements. Direct and manage post and special process operations including Secondary/Assembly, Coatings, Finishing, Metal Joining, and NDT. Oversee all NADCAP processes (including NDT, Chemical Processing, and Weld), as well as prepare for and lead associated audits. Coordinate plant activities through the planning of departmental team leaders to ensure the total manufacturing objectives are accomplished in a timely and cost-effective manner. Develop and control profits, plans and budget. Implement cost effective systems of control over capital investment, maintenance, tooling, operations, and labor. Key Roles Lead, Manage, and Hold others accountable, communicate, educate, develop team leaders Ensure delivery, quality, and efficiency; oversee post and special process strategy of Meadville plant Budget, scheduling, capacity planning Problem solving, removing obstacles; innovate and drive lean culture Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience Requirements: Requires a Bachelors' Degree in business or / and engineering discipline and five to ten years industry experience as a manufacturing engineer or operations manager, preferably in aircraft manufacturing, or equivalent combination of education and experience. Required Knowledge and Skills: The employee must possess the ability to communicate effectively with all internal and external customers in both written and oral form. Supervisory Responsibilities Responsibilities include supervision, training and development for all personnel conducting special plant operations. Work Environment The work environment characteristics described here are representative of those the employee encounters while performing the functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes, and/or airborne particles. The noise level in the work environment is frequently loud. Travel and overtime are required when necessary. Safety and Policy Practices The employee in this job must be knowledgeable in regard to the safety policies and procedures of the Company as described in the Company safety manual. The employee must adhere to all said policies and procedures while supporting the goals and objectives of the organization and recognize the Company's need to achieve its business objective. Employee is responsible for complying with company hazardous waste disposal procedures. All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. PI62a2a22a0d14-6450

Welder Location: 89822 State Highway 99 North, Eugene, OR, 97402, United States Employee Type: FT Non-Exempt Required Degree: High school Manage Others: No Description Lane Enterprises is excited to add a Welder to our Team! From generous benefits , including bonus opportunities and an Employee Stock Ownership Plan (ESOP) , to great employee retention , this is a fantastic opportunity to join a thriving organization! Benefits: Lane offers a generous benefits package to include Medical, Dental, Vision, 401k, Paid Time Off, Paid Holidays, Pension plan, Flexible Spending, Company paid Life Insurance, Voluntary Life Insurance, ESOP opportunity and a generous bonus incentive plan. Position Overview: This position is Responsible for fitting and welding of steel, aluminum and stainless-steel parts using a MIG process. Also required to perform other miscellaneous tasks, as assigned by supervisor. Essential Responsibilities: Set up welding machines based on the job at hand or using a Welding procedure specification. Read and interpret blueprints and/or drawings to determine the specific welding requirements. MIG weld steel, aluminum and stainless-steel components based on the specifications of the blueprints and/or drawings. Inspect equipment as required to maintain proper function. Follow, create, and help maintain Welding Procedure Specifications. Operate machinery used in the production process or assist machine operators. Assemble items as instructed by superintendent. Complete housekeeping duties in assigned area daily and/or when required. Follow all company rules and policies. Provide a great level of attention to detail and focus on the given task. Work with other employees to maximize productivity and efficiency. Prepare product for shipment. Lift raw materials, final products, and items packed for shipment, manually (up to 70 pounds), or using a hoist. Uphold all safety rules, OSHA standards, and quality standards, applicable to the responsibilities above. Requirements Minimum 3 years demonstrated experience in welding and fabrication using MIG or TIG practices. Ability to read tape measure, calipers and angle gauges. Ability to read and understand production assembly drawings, blueprints, specifications, and welding symbols. Effective oral and written communication. Strong Mechanical aptitude. Education and Experience: High School Diploma, GED or equivalent education preferred. Good Mathematical skills. Knowledge of welding and fabrication of piping and structural steel assemblies. Knowledge of machines and tools including their designs and uses. Lane Enterprises is an Equal Opportunity Employer (EOE) PIebbd8-0654

We're looking for a hands-on Showroom and Warehouse Associate to support multiple showroom locations across our market. This is a floating role that travels regularly to different stores, helping bring our showrooms to life through furniture setup, merchandising execution, and visual display support. If you enjoy variety in your workday, take pride in how spaces come together, and don't mind being on the move, this role offers a great blend of design support, physical work, and collaboration - with mileage reimbursement for all travel. What You'll Do Travel regularly between showroom locations within the market to support setup and merchandising needs Assist with unloading transfer trucks and inspecting product for damage or defects Assemble furniture and prepare pieces for showroom display Move product to the sales floor and help build displays according to design standards Partner closely with designers to open, tag, and organize accessories Help maintain organized, safe dock and storage areas by setting expectations and supporting store porters Support special projects such as new store openings, resets, and merchandising initiatives What We're Looking For Experience with furniture assembly, showroom setup, or visual merchandising Comfortable working independently while traveling between locations Reliable transportation and the ability to travel consistently during the workweek ( mileage reimbursed ) Self-motivated, dependable, and able to adapt in a fast-paced, changing environment Strong communication skills and a collaborative mindset Detail-oriented with a hands-on approach to problem-solving Physical & Travel Requirements Regular travel by vehicle to multiple showroom locations each week Occasional travel outside the market for store openings or special projects Ability to lift, push, and pull furniture up to 50 lbs independently and over 100 lbs with assistance Frequent standing, walking, bending, kneeling, and reaching Comfortable working across retail sales floors, warehouses, docks, and occasional outdoor environments Qualifications High School Diploma or GED required 1-2 years of related experience preferred (or equivalent combination of training and experience) Why This Role Matters As a floating Showroom and Warehouse Associate, you play a critical role in ensuring several showrooms - not just one - looks its best. Your flexibility, reliability, and attention to detail directly support our design vision and create an inspiring experience for our guests across the entire market. Compensation details: 17 Yearly Salary PI60cf5fc34e80-9969

Ashley The Wellsville Group is hiring a Warehouse Associate at our Aurora, OH facility! Help us unload, scan, assemble, and stage furniture for next-day deliveries across Northeast Ohio. Join a fast-paced team in a modern space where your work directly supports our 5 Star customer experience. What We Offer : Competitive Salary: $16.00-$17.00/hour Schedule: Monday through Friday, 7:00am-3:30pm Comprehensive Benefits : Health, dental, and vision insurance, paid time off, and 401(k) with company match. Employee Discounts : Insane discounts on our beautiful home furnishings and products. Growth Opportunities : We believe in promoting from within, so your success here can lead to exciting career advancements. The role leads into our Furniture Tech Apprentice Program. Supportive Team : Work alongside a team of experienced professionals who are dedicated to helping you succeed. What You'll Do Manage and handle furniture up to 100lbs. plus Help unload and put away furniture from inbound trailers using RF scan gun Help prepare next day delivery furniture by taking furniture out of packaging, inspecting for damages and putting handles on Stand and walk for long periods of time in a fast-paced environment As a furniture assembler you will pick the next day's deliveries, build the product & stage it for delivery. This position is a mix of speed & quality. Why You'll Love Working Here: We're more than just a store-we're a community. Our mission is to provide exceptional customer service and high-quality home products while fostering a workplace where employees thrive. What We're Looking For High School Diploma/GED Physical strength to lift furniture up to 100lbs. plus Valid Driver's License Warehousing or assembly experience, preferred Ready to Join Us? If you're ready to make a difference in our customers' lives and help them create the home of their dreams, we would love to have you as part of the Ashley The Wellsville Group family. Compensation details: 16-17 Hourly Wage PI9d4716b4b63f-1840

Kinperium-Hiniker LLC (Hiniker) is a Minnesota based manufacturer. With roots in the agricultural equipment industry going back to 1970 and continuing today, we know how to build tough, productive, reliable equipment. Hiniker is known for sturdy cultivators, efficient shredders, and niche equipment such as the cover crop seeder and NH3 monitors. In 1995, Hiniker branched into designing and manufacturing snow removal equipment, which is a trusted tool for many. Hiniker snow and ice equipment is built to enable the operator to work as efficiently as possible. We do this with innovative and purpose-built designs like the Hiniker C-Plow and the Hiniker Scoop Plow. We also manufacture a line of spreaders and skid steer plows. In 2024, we expanded our offerings with the acquisition of Daniels Plows, further strengthening our commitment to high-quality snow removal solutions. We are currently seeking a VP of Operations to help our team grow. This position requires a "hands-on" manufacturing executive who is skilled and knowledgeable in assessing, managing, implementing, and monitoring all production, purchasing, manufacturing, and logistic requirements of a dynamic manufacturing company in the snow equipment and agricultural products industry The executive will report to the CEO/President and work closely with both the President and General Manager on managing the day-to-day needs of the company, as well as execute on short-term and long-term goals established by management and the board of directors. The VP of Operations will provide leadership to the Operations teams to become change agents that promote continuous improvement, coach & teach associates, and deliver results that exceed customer expectations. The VP of Operations role requires transformational leadership, critical thinking, attention to detail, organizational and planning expertise, and solid judgment to deliver the safety, quality, cost and productivity requirements of the business. This role has a major effect on the financial results of the organization, and a degree of financial acumen is required to link operational performance with revenue and profit. and profit. VP of Operations Duties and Responsibilities: Manufacturing Develop and implement lean process improvements to create an efficient manufacturing operation that exceed customer expectations. Develop manufacturing roadmap for capital investments and process improvements that deliver consistent, measurable manufacturing results. Develop and monitor daily metrics for plant performance that enhance leadership team visibility and understanding of operational performance. Execute a manufacturing strategy to eliminate redundancies while establishing centers of excellence for manufacturing and assembly of a healthy mix of products and standard, custom, configured. Establish a long-term strategy for the types of manufacturing capabilities to be retained and developed. Act as a change agent for continuous improvement activities Manage the team to improve performance while lowering overall cost. Implement improvements / automation to the system-wide operations routines to improve manufacturing levels. Foster a culture of lean manufacturing. Manage the department budget for overhead costs, capital expenditure(s), headcount, as well as delivery performance. Logistics & Distribution: Support the supply chain strategy that meets corporate performance objectives as well as customer expectations. Optimize processes to ensure delivery of supplies and improve supply chain metrics in terms of cost and service. Ensure an optimal level of inventory control and operational capacity planning to meet demand. Oversee and supervise the distribution and logistics strategy to competitively fulfill demand and optimize inventory levels. Quality Oversee the Quality Assurance function & infrastructure to ensure that all final product observes the company's quality standards. Ensure the effective development and implementation of inspection activities, the detection and resolution of problems, and the delivery of satisfactory outcomes. Safety Ensure all aspects of safety and the organization's facilities follow the various government and regulatory bodies as they apply to employee health & safety. Support HR and Safety teams to foster safety-minded culture to prevent harm to employees. Promote and encourage open communications, encourage reporting of potential risks or near-miss incidents, and demonstrate by action the collective responsibility for safety. Support annual safety training programs. Senior Leadership Data driven leader who can communicate results and plans to the leadership team, while effectively communicating goals and objectives to the manufacturing team. Lead a team environment that values diversity and inclusion with talent development at all levels. Foster and maintain healthy collaborative workforce relations. Promote a culture that emphasizes customer service for an ultimate customer experience. Develops and recommends corporate operations policy within the Operations Department. Defines and recommends cost reductions and efficiency objectives in each area of Operations. Develops specific short-term and long-term plans and programs, together with supporting budget requests and financial estimates. Manages performance against operating plans and standards Reviews and approves operating and detail plans for the control of, budgets, labor efficiency, material procurement and cost control, works closely with other departments to optimize company resources, engineering effectiveness, customer service, and order entry efficiency, and Human Resources. VP of Operations Education & Experience Bachelor's degree in engineering or a related profession. Extensive experience (min 15 years) in managing a manufacturing environment, with preferred experience with operations consisting of metal fabrication, welding, assembly and kitting of completed components. Experience as a plant manager, manufacturing manager, or sourcing/supply chain manager, or a combination of each is highly desired. Ability to translate business strategy into specific team objectives, break down organizational boundaries through collaboration, build strong relationships based on trust with all levels of employees, and establish a track record of personal engagement with customers, partners and suppliers. Familiarity with manufacturing systems such as Epicor. Experience in cross-border (Canada to US) operations is an asset. Experience implementing large-scale initiatives, tracking results, and reporting outcome to the leadership team. Technical proficiency in all areas of manufacturing, supply chain management, and quality systems. VP of Operations Skills and Abilities: Excellent leadership skills, as evidenced by a record of accomplishment of hiring, retaining, developing and motivating top manufacturing talent. Understanding large capital equipment process in manufacturing. Advanced knowledge of lean manufacturing systems, processes, products, and customers. Identifies strategic opportunities for operations and demonstrates the ability to think beyond the current situation and visualize innovative and visionary approaches to broad business challenges. Ability to identify and manage key cost drivers and efficiency opportunities. Personal commitment to organizational excellence, honesty, integrity, and a strong sense of ethics in all decisions and actions. Experience in preparing internal and external reporting to support key decision making and the achievement of organizational objectives. Ability to partner effectively with Finance, Sales, Human Resources and Executive teams. A strong communicator with effective presentation skills. VP of Operations Competencies: Strategic Agility : Gains perspective and balances the pressure between daily tasks and strategic actions that impact the long-term viability of the organization. Critical thinker: Able to identify problems/issue and implement plan to promptly resolve. Operational Acumen: Maintains and applies a broad understanding of operational management principles to ensure decisions are aligned with the organization's strategic objectives. Involves a thorough understanding of processes, workflows to identify areas for improvement and drive efficiency and productivity. Collaborative Leadership: Knows how to get things done through formal channels and the informal network while instilling a sense of purpose in others; sees connection to larger purposes Communicate for Impact: Devotes the time and resources necessary to communicate the strategic vision, direction, priorities, and progress toward objectives to all key stakeholders. Leading Change: Fosters a work environment that encourages creative thinking and the ability to maintain focus, intensity and persistence, even under adversity. Leading People: Able to develop and implement strategies to maximize employee performance and foster employee engagement. EOE/Minorities/Females/Veterans/Disabled. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation . click apply for full job details

Cabinet Finisher II Weekend Shift in GAC Savannah Unique Skills: Craft the finest interiors in aviation Gulfstream Furniture Center is looking for experienced cabinet finisher who is talented, motivated and ready to craft unique designs in award-winning cabins. This position is for the Weekend Shift; Fri, Sat, Sun , you may be asked to be trained initially on 1st shift (Mon-Thurs ) then transitioned to weekends with notification. The weekend shift is 3-12 hour shifts, work 36 hours and be paid for 40, plus shift "differential pay" for hours worked. Two (2) years' experience in wood finishing / cabinetmaking required, aerospace industry experience preferred. This position is for personnel external to the finish Dept (0948) to facilitate increase to our headcount Education and Experience Requirements High School Diploma or GED required. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products. Position Purpose:Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. Job Description Principle Duties and Responsibilities:Essential Functions: Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). . Uses the material tracking system to create parts demand, track squawks and to sign-off work. Additional Functions: Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. . Perform other duties as assigned.Other Requirements: Possess a working knowledge of Gulfstream inspection and process specifications. The ability to read, write, speak, and understand the English language. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 231079 Category: Operations Percentage of Travel: None Shift: Weekend Days Employment Type: Full-time Posting End Date: 05/13/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information Site Utilities Contacts Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Primary Duties / Accountability: 1. Design cost-effective displays for products from conception to completion 2. Design projects - analyze specifications, determine optimal production, prepare preliminary layouts 3. Make material recommendations, test prototypes and materials 4. Effectively communicate complete and accurate details to individual departments 5. Interact with manufacturing facility as needed from concept to final output - Pound offs. Mylars, Mount, Die Cutting and Assembly Quality checks 6. Facilitate ordering process for dies, create complete instruction sheets, carton content/layout/sizes 7. Receive, respond and solve internal and external inquiries and/or complaints 8. Interact as liaison between sales team, PM's, customer, & manufacturing 9. Assist in maintaining a complete photo library of completed projects/white samples. 10. Maintain time log for individual jobs 11. Works independently - regularly exercises judgment and discretion Secondary Duties / Accountability: 1. Maintain highly organized, detailed records of complete design specifications & CAD drawings 2. Maintain a positive , cooperative, professional attitude toward co-workers, customers, and vendors 3. Continually meet or exceed internal and external customer needs / expectations in quality and service 6. Maintain a good attendance/on time record 8 Offer suggestions for problem solving, streamlining processes, etc 10 Assist on projects created by others during times of absence. Experience Required: Experience with Artios CAD, Photo Shop, Illistrator Ability to hand draw or use software design programs Excellent organizational skills/ability to multi-task Excellent customer service skills Excellent communication skills Previous work experience in manufacturing of temporary displays a plus. Speak, read, write English Physical & Special Demands: Physical Demand None Less than 1/4 of Time 1/4 of Time 3/4 and More of Time Stand X Walk X Sit X Use hands or fingers to handle or touch X Reach above shoulders X Climb or balance X Stoop, kneel, crouch or crawl X Talk or hear X Taste or smell X Use foot/feet to operate machine X Lifting None Up to 1/8 of Time 1/3 to 2/3 of Time 2/3 and More of Time Up to 10 lbs. X Up to 25 lbs. X Up to 50 lbs. X Up to 80 lbs. X More than 100 lbs. X Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Structural Mechanic 4 in GAC Van Nuys Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Most be able to work any shift. Most have an extensive knowledge of sheetmetal and structural repairs. The compensation range for this role is $34.15 - $39.84 per hour. Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location. Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes: Medical, prescription, dental and vision coverage Life and disability insurance Retirement savings plan Employee assistance plan Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. Education and Experience Requirements High School Diploma or GED required. 6 years related structural assembly experience. Experience working with Solumnia and Smarteam preferred Q-stamp preferred. Position Purpose:In a team oriented work environment, independently performs a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. Assists and instructs other team members. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Job Description Principle Duties and Responsibilities:Essential Functions: Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways . Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements . Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents . Check all work and ensure a defect free assembly prior to final inspection . Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks . Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations . Support Lean Activities, comply with all safety, 5S, and housekeeping policies. Perform other duties as assigned.Other Requirements: Good working knowledge of computers and related software. Must be able to read and interpret blue prints. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance. Must be able to work any shift. Must be able to lift 50 lbs. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas. Must be able to read, write, speak, and understand the English language. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 230658 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 03/27/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information Site Utilities Contacts Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic 4 (Weekend Day Shift) in GAC St. Louis Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Candidate must be well trained on using sheet metal structures tooling, understand and interpret structural drawings, and have experience on aircraft structural repairs. This shift is primarily a Weekend Day Shift (Friday-Sunday from 6:00am to 6:30pm), but candidate must be willing to work multiple shifts as required. The base compensation range for this role is $31.19 - $36.38 per hour. Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location. Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes: Medical, prescription, dental and vision coverage Life and disability insurance Retirement savings plan Employee assistance plan Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. Education and Experience Requirements High School Diploma or GED required. 6 years related structural assembly experience. Experience working with Solumnia and Smarteam preferred Q-stamp preferred. Position Purpose:In a team oriented work environment, independently performs a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. Assists and instructs other team members. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Job Description Principle Duties and Responsibilities:Essential Functions: Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways . Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements . Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents . Check all work and ensure a defect free assembly prior to final inspection . Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks . Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations . Support Lean Activities, comply with all safety, 5S, and housekeeping policies. Perform other duties as assigned.Other Requirements: Good working knowledge of computers and related software. Must be able to read and interpret blue prints. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance. Must be able to work any shift. Must be able to lift 50 lbs. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas. Must be able to read, write, speak, and understand the English language. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 229842 Category: Operations Percentage of Travel: Up to 25% Shift: Weekend Days Employment Type: Full-time Posting End Date: 03/18/2026 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information Site Utilities Contacts Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Job Description Summary: $5,000 sign on bonus This position administers diagnostic and therapeutic procedures to facilitate the patient's breathing. Responsible for evaluating respiratory care for appropriateness and effectiveness and communicates findings/results to other health care professionals. This position may perform role of charge therapist in absence of manager/supervisor. Responsibilities And Duties: Driving is an essential function of the job. 15% Assessment/Treatment 1. Reviews available clinical data. 2. Collects or recommends obtaining additional data in a patient care setting. 3. Prioritizes treatments based on patients immediate condition, or anticipated needs of patient or situation. 4. Uses appropriate evidence-based assessment techniques and instruments to collect, analyze, and document initial and ongoing subjective and objective data from patients, significant others, and communities. 5. Identifies patterns and variances and communicated findings respiratory problems or issues/diagnose s both initial and ongoing, to appropriate people via referrals, rounds, shift reports and care conferences, etc. 6. Contributes to the development of the Respiratory Care Plan. 15% : Evaluation 1. Identifies opportunities for Process Improvement. 2. Evaluates and documents response to respiratory interventions and achievement of outcomes based on patients objective and subjective responses to respiratory care at appropriately determined intervals; including patient, family and others on healthcare team in evaluation and/or revision of plan of care based on evaluative data. 3. Uses ongoing assessment data to revise diagnoses, outcomes, plan and implementation as needed; disseminates results to patient and others involved in the care situation, as appropriate, in accordance with state and federal laws and regulations 4. Recommends modifications to the Respiratory Care Plan based on the patients response. 5. Determines the appropriateness of prescribed Respiratory Care Plan and recommends modifications when indicated by data. 45% Procedures/Operations 1. Maintains records and communicates information. 2. Administers MDI, medication nebulization, posture drainage, positive pressure breathing, mechanical ventilation, oxygen and aerosol therapy, incentive spirometry, etc.; observes patient during treatments; performs auscultation, checks pulse and respiratory rate; notifies Medical or Nursing personnel of any adverse reactions; records pertinent data on patient charts; carries out interventions appropriate to patient age, sex, physical and developmental needs. 3. Prepares for patient treatment: receives orders from Physicians and Nurses for treatment; reviews requests to determine requirements for treatments; prioritizes work assignments; gathers necessary materials and equipment and transports to patient's bedside; prepares medications; explains treatment and breathing procedures to patient; follows protocols. 4. Maintains the patient airway, including the use of artificial airway. Achieves adequate respiratory support for patient. 5. Performs invasive procedures such as suctioning and arterial blood gas sampling/analysis to ensure proper airway function and to provide relevant diagnostic data. 6. Responds to stat and code calls and emergency response team needs RRT, RAT et c and participates in trauma and resuscitation procedures; assists with transport of patients requiring ventilatory support. 7. Acts as an assistant to the physician performing special procedures, including but not limited to intubations and bronchoscopies. 8. Manages resources including time, supplies & equipment to maintain a safe and efficient environment. 9. Communicates and participates appropriately in shift reports, staff meetings, physician rounds and multi-disciplinary teams. 10. Effectively uses hospital systems as related to order management, test resulting, billing compliance, electronic documentation and medication administration. 1 1. Implements plan in safe and timely manner; Documents interventions and any modifications assisting patient/community to achieve expected outcomes. 12. Uses evidence-based interventions and treatments, scientific knowledge, critical thinking, technical skills, and effective interpersonal skills specific to patient problems or diagnoses needed to provide respiratory care. 13. Provides health teaching for self-care; considers learning needs, readiness and ability to learn, language preference and culture; seeks opportunities for feedback and evaluation of the effectiveness of strategies used. 14. May perform duties of Charge Therapist: as Charge Therapist assigns work load to Shift Members; checks progress of Shift Members during shift; receives all questions concerning patients in assigned are; discusses patient related data with Physician or Nursing Staff; reports pertinent data to Supervisor; confers with employees on work load and equipment needs. 20% Management of Equipment 1. Manages equipment in respiratory care setting. 2. Selection, assembly & troubleshooting of malfunctioning equipment. 3. Ensures Regulatory Compliance of instruments and other equipment as related to use and competency. 4. Ensures infection control and quality control while managing equipment. 5% : Education/Training of Others 1. Provides instruction and mentoring for students and staff as needed. Interacts with and contributes to professional development of peers and colleagues by sharing knowledge such as: inpatient care conferences, formal or informal meeting presentations; providing feedback about practice and/or role performance; maintains compassionate and caring relationships with peers and colleagues contributing to an environment conducive to a supportive and healthy work environment. 2. Provides education to patient and families on therapeutic modalities. 3. Instructs other disciplines on use of equipment and techniques appropriate for respiratory care. 4. Refers patients to continuum of care resources. 5. Attains knowledge of competency reflecting current respiratory practice through participation in ongoing educational activities; demonstrates commitment to lifelong learning; seeks experiences and acquires knowledge and skills appropriate to specialty area, practice setting, role, situation or current practice requirements. Minimum Qualifications: Associate's Degree (Required)BLS - Basic Life Support - American Heart Association, DL-HC - Driver's License only if in a Home Care department - Department of Motor Vehicles, LIC - Licensed in Field - State of Ohio, NBRC - National Board of Respiratory Care - The National Board for Respiratory Care Additional Job Description: Field of Study: Respiratory Care or Certificate of Program Completion in Respiratory Care; NBRC Certification ; Ohio license or Ohio Limited Permit; CPR Certification . Knowledge of Respiratory Care Technology; Patient assessment skills; Clinical Decision Making skills. 1 year clinical Experience . For this position, in the Home Care department only, Minimum Qualifications include: Valid state driver's license, Minimum of eighteen (18) years old, Have an acceptable Motor Vehicle Report (MVR), Must provide proof of insurance, if applicable. Work Shift: Night Scheduled Weekly Hours : 24 Department Pulmonary Services Join us! if your passion is to work in a caring environment if you believe that learning is a life-long process if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment

We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Job Description Summary: This position administers diagnostic and therapeutic procedures to facilitate the patient's breathing. Responsible for evaluating respiratory care for appropriateness and effectiveness and communicates findings/results to other health care professionals. This position may perform role of charge therapist in absence of manager/supervisor. Responsibilities And Duties: Driving is an essential function of the job. 15% Assessment/Treatment 1. Reviews available clinical data. 2. Collects or recommends obtaining additional data in a patient care setting. 3. Prioritizes treatments based on patients immediate condition, or anticipated needs of patient or situation. 4. Uses appropriate evidence-based assessment techniques and instruments to collect, analyze, and document initial and ongoing subjective and objective data from patients, significant others, and communities. 5. Identifies patterns and variances and communicated findings respiratory problems or issues/diagnose s both initial and ongoing, to appropriate people via referrals, rounds, shift reports and care conferences, etc. 6. Contributes to the development of the Respiratory Care Plan. 15% : Evaluation 1. Identifies opportunities for Process Improvement. 2. Evaluates and documents response to respiratory interventions and achievement of outcomes based on patients objective and subjective responses to respiratory care at appropriately determined intervals; including patient, family and others on healthcare team in evaluation and/or revision of plan of care based on evaluative data. 3. Uses ongoing assessment data to revise diagnoses, outcomes, plan and implementation as needed; disseminates results to patient and others involved in the care situation, as appropriate, in accordance with state and federal laws and regulations 4. Recommends modifications to the Respiratory Care Plan based on the patients response. 5. Determines the appropriateness of prescribed Respiratory Care Plan and recommends modifications when indicated by data. 45% Procedures/Operations 1. Maintains records and communicates information. 2. Administers MDI, medication nebulization, posture drainage, positive pressure breathing, mechanical ventilation, oxygen and aerosol therapy, incentive spirometry, etc.; observes patient during treatments; performs auscultation, checks pulse and respiratory rate; notifies Medical or Nursing personnel of any adverse reactions; records pertinent data on patient charts; carries out interventions appropriate to patient age, sex, physical and developmental needs. 3. Prepares for patient treatment: receives orders from Physicians and Nurses for treatment; reviews requests to determine requirements for treatments; prioritizes work assignments; gathers necessary materials and equipment and transports to patient's bedside; prepares medications; explains treatment and breathing procedures to patient; follows protocols. 4. Maintains the patient airway, including the use of artificial airway. Achieves adequate respiratory support for patient. 5. Performs invasive procedures such as suctioning and arterial blood gas sampling/analysis to ensure proper airway function and to provide relevant diagnostic data. 6. Responds to stat and code calls and emergency response team needs RRT, RAT et c and participates in trauma and resuscitation procedures; assists with transport of patients requiring ventilatory support. 7. Acts as an assistant to the physician performing special procedures, including but not limited to intubations and bronchoscopies. 8. Manages resources including time, supplies & equipment to maintain a safe and efficient environment. 9. Communicates and participates appropriately in shift reports, staff meetings, physician rounds and multi-disciplinary teams. 10. Effectively uses hospital systems as related to order management, test resulting, billing compliance, electronic documentation and medication administration. 1 1. Implements plan in safe and timely manner; Documents interventions and any modifications assisting patient/community to achieve expected outcomes. 12. Uses evidence-based interventions and treatments, scientific knowledge, critical thinking, technical skills, and effective interpersonal skills specific to patient problems or diagnoses needed to provide respiratory care. 13. Provides health teaching for self-care; considers learning needs, readiness and ability to learn, language preference and culture; seeks opportunities for feedback and evaluation of the effectiveness of strategies used. 14. May perform duties of Charge Therapist: as Charge Therapist assigns work load to Shift Members; checks progress of Shift Members during shift; receives all questions concerning patients in assigned are; discusses patient related data with Physician or Nursing Staff; reports pertinent data to Supervisor; confers with employees on work load and equipment needs. 20% Management of Equipment 1. Manages equipment in respiratory care setting. 2. Selection, assembly & troubleshooting of malfunctioning equipment. 3. Ensures Regulatory Compliance of instruments and other equipment as related to use and competency. 4. Ensures infection control and quality control while managing equipment. 5% : Education/Training of Others 1. Provides instruction and mentoring for students and staff as needed. Interacts with and contributes to professional development of peers and colleagues by sharing knowledge such as: inpatient care conferences, formal or informal meeting presentations; providing feedback about practice and/or role performance; maintains compassionate and caring relationships with peers and colleagues contributing to an environment conducive to a supportive and healthy work environment. 2. Provides education to patient and families on therapeutic modalities. 3. Instructs other disciplines on use of equipment and techniques appropriate for respiratory care. 4. Refers patients to continuum of care resources. 5. Attains knowledge of competency reflecting current respiratory practice through participation in ongoing educational activities; demonstrates commitment to lifelong learning; seeks experiences and acquires knowledge and skills appropriate to specialty area, practice setting, role, situation or current practice requirements. Minimum Qualifications: Associate's Degree (Required)BLS - Basic Life Support - American Heart Association, DL-HC - Driver's License only if in a Home Care department - Department of Motor Vehicles, LIC - Licensed in Field - State of Ohio, NBRC - National Board of Respiratory Care - The National Board for Respiratory Care Additional Job Description: Field of Study: Respiratory Care or Certificate of Program Completion in Respiratory Care; NBRC Certification ; Ohio license or Ohio Limited Permit; CPR Certification . Knowledge of Respiratory Care Technology; Patient assessment skills; Clinical Decision Making skills. 1 year clinical Experience . For this position, in the Home Care department only, Minimum Qualifications include: Valid state driver's license, Minimum of eighteen (18) years old, Have an acceptable Motor Vehicle Report (MVR), Must provide proof of insurance, if applicable. Work Shift: Night Scheduled Weekly Hours : 36 Department Pulmonary Services Join us! if your passion is to work in a caring environment if you believe that learning is a life-long process if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment

Tooling & Mold Lead fitchburg, MA 01420 Description Micron Solutions is a multifaceted contract manufacturing organization specializing in thermoplastic injection molding, precision machining and finishing, and silver-plated medical sensors for disposable electrodes. We collaborate with clients of all sizes to provide manufacturing solutions and assembly services that support their goals from concept to commercialization. Our 120,000 square foot Fitchburg, MA facility is equipped to manage projects across the full product lifecycle. Direct and oversee the work of Mold Makers to ensure the highest quality output that meets customer requirements and delivery timelines. Responsible for the machining, fabrication, repair, and preventative maintenance of all Micron Products Injection molds. What We Offer: Competitive salary Comprehensive benefits package, including health insurance, 401(k), and paid time off. Work Environment: Positive, inclusive, and high-performing work environment where you can thrive both personally and professionally. KEY ACCOUNTABILITIES Participate in technical interviews for hiring new Mold Makers Train new Mold Makers on: Proper use of PPE Good housekeeping/6S practices Machine and overall safety CNC functions QMS work instructions relevant to their role Schedule staff breaks and lunches to ensure uninterrupted production and compliance with Micron policy. Assign work based on skill level and job requirements. Provide performance input to Manager or designee for staff reviews Mentor team members and provide support as needed. Report on shift performance, including downtime, quality (defects), labor efficiency, and overall productivity. Ensure work orders are accurately entered in IQMS. Provide technical input to the quoting team on mold designs, fixtures and tooling. Mold Maker Accountabilities: Perform all functions of the Mold Maker Role Collaborate with other departments on routing, planning, work instructions, and problem-solving. Accurately log work time to jobs and maintain detailed records. Plan work activities, identify risks, set priorities, and escalate issues that may impact delivery. Select appropriate machining equipment based on material type (e.g., H13, SS. S7, P20) and hardness. Operate tool room equipment (CNC, milling machines, lathes, EDM) to achieve tight tolerances. Fabricate mold components (cores, cavities, ejectors), including heat treating and grinding. Assemble molds and prepare them for testing, verifying fit, function, and cooling systems. Troubleshoot and resolve mold issues: make final adjustments to ensure performance. Disassemble, repair, and modify molds as needed. Support continuous improvement initiatives in mold making processes. Maintain tooling inventory and assist with mold cleaning and repairs. Provide technical support to the molding and maintenance departments. Ensure compliance with all molding-related procedures and policies. Qualifications JOB QUALIFICATIONS Technical Trade School Certification preferred 5+ years of experience in machine tools, mold design & mold fabrication Strong understanding of part geometry and trigonometry; ability to read blueprints. Excellent verbal and written communication skills across all levels of the organization. Strong organizational skills and attention to detail. Self-directed and dependable, with the ability to work independently. Proficient in Microsoft Office (Word, Excel) and ERP/MRP systems. Basic experience with SolidWorks preferred. Please note: This position is not eligible for visa sponsorship. Applicants must be authorized to work in the United States without current or future sponsorship requirements. PM21 Compensation details: 40-50 Hourly Wage PIabcf82de2aa9-8263

TITLE: Shift Leader (SL) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details

TITLE: Shift Leader (SL) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details

Job Summary: The Design Engineer is ultimately responsible for the research, development and design of product according to project requirements. The Design Engineer develops submittals, layouts, schematics and shop details as part of a design team in accordance with project specifications, building codes and site conditions. Design Engineers develop 2D and 3D project submittals and production releases for fabrication of product. Essential Duties & Responsibilities: Project Planning Project assignments are of intermediate complexity, require customization of components and design and are of low risk, and require some interaction with customers Provide conceptual design drawings and value engineering solutions to projects in the developmental design phase to assist the sales team in providing accurate and competitive pricing. Thoroughly review project specifications and scope, placing emphasis on design requirements. Conduct and review various calculations such as strength, weights, forces and stresses for material and component selection under supervision. Coordinator with project team to prepare submittal drawings for customer approval based on project specifications, scope, and engineering requirements; determine potential value engineering opportunities for project. Project Execution Work in conjunction with project strategy and schedule set forth by Project Manager Prepare measuring templates, acquire field dimensions and construct as-built 3D models and layouts to ensure design feasibility and accuracy. Prepare accurate assembly and part drawings to assure proper fabrication and installation of product using Autodesk Inventor and AutoCAD. Assist Project Manager in completion of all specified closeout documents required by the customer including final ‘as-built’ drawings. Perform project review with thorough synopsis of project and opportunities for improved performance on future projects General Provide material take-offs and estimates and assist in project forecasting Assist Project Manager with change orders, project schedules and project evaluation Integrate educational and professional experience to optimize project efficiencies. Assist as required in the research and development of new and improved product offerings. Ability to read and interpret architectural and fabrication drawings Work Remotely Temporarily due to COVID-19 Required Skills Required Experience Required Qualifications: Bachelor’s Degree in Mechanical Engineering or equivalent 1-5 years of related experience Intermediate experience with Microsoft Excel, AutoCAD and Autodesk Inventor Possess complex geometry skills and excellent oral and written communication skills Problem solving skills with a collaborative approach and timely resolution General understanding of building codes and materials Thorough understanding of project documents Basic knowledge of manufacturing processes, production capabilities, and work cell functions Preferred Qualifications: Experience in manufacturing or construction industries Experience with Inventor iLogic Skills Job Location Minneapolis, US-MN