Job Description Job Description Description: About The Role The Quality Assurance (QA) Technician has the primary responsibility for protecting the food by conducting food safety and quality sampling, testing, and documentation to meet all regulatory, customer and Pures Foods requirements. Responsible for meeting all applicable food regulations (international, national, state, and local) Responsible for sampling, testing, and documentation of the procedures, records, Good Manufacturing Practices (GMPs), and Hazard Analysis and Critical Control Points (HACCP) Works to maintain the safety, legality and quality of each food and the processes used in their manufacture. Responsible for meeting and exceeding customer requirements Works to reduce customer/consumer complaints for foods manufactured on site Reports food safety and quality issues to their supervisor Authorized to hold product based on food safety or quality non-conformance Participates in daily food evaluation to identify possible defects Participates in physical bakery inspections on a weekly basis on each area (pest control, operational methods, maintenance for food safety, sanitation, personnel practices, etc.) Selects food items for analysis at specified stages in the production process for evaluating compliance to specification Able to use the following instrumentation/measuring device: Thermometers Metal detectors Ray devices Calculators Scales Gauges Calipers Rulers Moisture analyzers Ovens Responsible for assuring materials are received from approved suppliers and conducts raw material supplier performance monitoring Participates in the Environmental Monitoring Programs (i.e., collecting swab samples, using the ATP system) Able to print finished food case labels (as appropriate to the bakery or kitchen) Ensures appropriate communication of food safety/QA issues with Production Supervisors and QA Technicians at shift change Other duties may be assigned, and QA Technician is expected to effectively manage and execute changes Responsible for overseeing Quality Technicians Ability to work different shifts and weekend ESSENTIAL FUNCTIONS OF THE JOB An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodation may be made to enable individuals with disabilities to enable them to perform the essential functions of this position . Requirements: Education and Experience Education, Technical Qualifications, Experience and Competencies Proficiency Level Effective work ethic and good communications skills High School Diploma, some college science courses or experience in the food industry Training in HACCP (Hazard Analysis & Critical Control Points) Training in a Global Food Safety Initiative (GFSI) standard such as BRC or SQF Good writing, mathematics, and critical thinking skills Experience in computers including spreadsheets Work Environment and Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to climb, stand, or walk for extended periods of time. Use a computer keyboard and monitor more than 25% of total work time. The employee must occasionally lift and/or move up to 50 pounds. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee frequently works near moving mechanical parts and is occasionally exposed outside weather conditions, wet and/or humid conditions, fumes, or airborne particles, and extreme cold. The noise level in the work environment is often moderate to loud. Travel Required No travel is required for this job. EEO Statement Pure's is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by applicable law. We ensure fair treatment in all aspects of employment, including recruitment, hiring, training, promotion, and compensation. Our commitment to diversity and inclusion fosters a workplace where every individual is valued and respected. Compensation details: 19-21 Hourly Wage PIab391f655f80-9880
08/09/2026
Full time
Job Description Job Description Description: About The Role The Quality Assurance (QA) Technician has the primary responsibility for protecting the food by conducting food safety and quality sampling, testing, and documentation to meet all regulatory, customer and Pures Foods requirements. Responsible for meeting all applicable food regulations (international, national, state, and local) Responsible for sampling, testing, and documentation of the procedures, records, Good Manufacturing Practices (GMPs), and Hazard Analysis and Critical Control Points (HACCP) Works to maintain the safety, legality and quality of each food and the processes used in their manufacture. Responsible for meeting and exceeding customer requirements Works to reduce customer/consumer complaints for foods manufactured on site Reports food safety and quality issues to their supervisor Authorized to hold product based on food safety or quality non-conformance Participates in daily food evaluation to identify possible defects Participates in physical bakery inspections on a weekly basis on each area (pest control, operational methods, maintenance for food safety, sanitation, personnel practices, etc.) Selects food items for analysis at specified stages in the production process for evaluating compliance to specification Able to use the following instrumentation/measuring device: Thermometers Metal detectors Ray devices Calculators Scales Gauges Calipers Rulers Moisture analyzers Ovens Responsible for assuring materials are received from approved suppliers and conducts raw material supplier performance monitoring Participates in the Environmental Monitoring Programs (i.e., collecting swab samples, using the ATP system) Able to print finished food case labels (as appropriate to the bakery or kitchen) Ensures appropriate communication of food safety/QA issues with Production Supervisors and QA Technicians at shift change Other duties may be assigned, and QA Technician is expected to effectively manage and execute changes Responsible for overseeing Quality Technicians Ability to work different shifts and weekend ESSENTIAL FUNCTIONS OF THE JOB An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodation may be made to enable individuals with disabilities to enable them to perform the essential functions of this position . Requirements: Education and Experience Education, Technical Qualifications, Experience and Competencies Proficiency Level Effective work ethic and good communications skills High School Diploma, some college science courses or experience in the food industry Training in HACCP (Hazard Analysis & Critical Control Points) Training in a Global Food Safety Initiative (GFSI) standard such as BRC or SQF Good writing, mathematics, and critical thinking skills Experience in computers including spreadsheets Work Environment and Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to climb, stand, or walk for extended periods of time. Use a computer keyboard and monitor more than 25% of total work time. The employee must occasionally lift and/or move up to 50 pounds. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee frequently works near moving mechanical parts and is occasionally exposed outside weather conditions, wet and/or humid conditions, fumes, or airborne particles, and extreme cold. The noise level in the work environment is often moderate to loud. Travel Required No travel is required for this job. EEO Statement Pure's is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by applicable law. We ensure fair treatment in all aspects of employment, including recruitment, hiring, training, promotion, and compensation. Our commitment to diversity and inclusion fosters a workplace where every individual is valued and respected. Compensation details: 19-21 Hourly Wage PIab391f655f80-9880
Job Description Job Description Job Summary: The Director of Manufacturing Engineering is a hands-on leadership role and the process authority for how Butcher Power Products' switchboard and switchgear products are built. The person in this role must be the subject-matter expert who can also do the work - capable of designing and improving manufacturing processes and line layouts, building routings and process documentation, and personally leading process and PFMEA reviews - so they can teach and develop the manufacturing engineering team and set the standard for process quality. This role owns how products are built rather than what is designed; however, deep familiarity with the product and the production floor is essential. The Director must understand the design intent released by Product Engineering and the realities of the floor in order to engineer processes that are efficient, repeatable, and capable. This role works hand in hand with Product Engineering as the manufacturing voice in the design process, partners with Quality on process controls, and supports Production and Planning rather than owning them. Key Responsibilities: • Hands-On Process Engineering: Personally design, document, and improve the manufacturing processes, routings, work instructions, and line layouts that build the product. This is a working role: the successful candidate stays actively engaged in process design and technical problem-solving alongside the team rather than delegating all hands-on work. • Process Authority & Technical Review: Lead, critique, and approve the team's process designs, routings, PFMEAs, and control plans; set and enforce the standard for process quality, capability, and engineering rigor through formal process reviews. • Mentorship & Teaching: Coach, train, and develop manufacturing engineers and technicians in process design, tooling, DFM/DFA, Lean and Six Sigma, time studies, and structured problem-solving, raising the technical capability of the whole team. • Leadership & Management: Lead and manage the manufacturing engineering team, including hiring, development, workload balancing, priorities, and performance. • Process Strategy & Standardization: Own manufacturing process strategy and standardization across product lines, and define the tooling and capital equipment roadmap. • Product Engineering Partnership (DFM): Work closely and continuously with Product Engineering as the manufacturing voice in the design process - provide manufacturability and assembly feedback at design reviews before release, jointly resolve producibility issues, and ensure released designs transition cleanly into production. • Process Controls & Quality Partnership: Own the manufacturing side of PFMEAs and control plans in partnership with Quality Engineering; ensure processes are capable, controlled, and continuously monitored. • Continuous Improvement: Drive Lean, Six Sigma, and Kaizen across the function to improve throughput, cycle time, yield, and cost. • Capital, Tooling & Automation: Plan and justify capital equipment, tooling, and automation investments, and provide financial management of the manufacturing engineering capital and tooling budgets. • New Product Introduction (NPI): Lead the process side of NPI - develop and validate the processes, tooling, and routings that bring newly released designs into production. • Cross-Functional Collaboration: Partner with Production, Planning, Quality, Project Management, and Product Engineering on capacity, scheduling, and material flow, supporting these functions rather than owning them. • Safety & Compliance: Ensure manufacturing processes across the function comply with safety, environmental, and regulatory standards, including UL 891, NEC, and ANSI. Required Qualifications • Bachelor's degree in Manufacturing, Industrial, or Mechanical Engineering. • 8+ years of progressive process engineering (or directly related) experience, including significant time spent personally developing and improving manufacturing processes. • Hands-on proficiency in SolidWorks for process documentation, line layouts, and reviews; the ability to design tooling and fixtures in CAD is a plus. • Strong proficiency developing routings, work instructions, process documentation, and process controls. • Proven ability to lead formal process and PFMEA reviews and to mentor and train engineers and technicians. • Experience hiring, developing, and managing a manufacturing engineering team. • Strong working knowledge of PFMEA, control plans, SPC, and process capability (Cpk). • Deep knowledge of Lean Manufacturing, Six Sigma, and continuous improvement methodologies. • Strong understanding of the products being built and of how design intent translates into manufacturing process - sufficient product familiarity to engineer the right processes. • Working knowledge of UL 891 and related standards (NEC, ANSI) as they affect manufacturing processes. • Experience planning and justifying capital equipment and tooling investments, including financial management of budgets. • Hands-on fabrication and machining experience is a plus. • Automation experience is a plus. • Experience with structured problem-solving methods such as 8D or A3 is a plus. • Familiarity with ERP/MRP systems, particularly Microsoft Dynamics 365 (D365). • Excellent leadership, project management, and problem-solving skills. • Strong communication and interpersonal abilities. Preferred Qualifications • Hands-on manufacturing process design and improvement (CAD) • Process authority and engineering quality standards • Technical mentoring, teaching, and team development • Close partnership with Product Engineering (DFM) • Process strategy, standardization, and tooling roadmap • Design-for-manufacturability partnership • Process controls, PFMEA, and capability • Continuous improvement and Lean/Six Sigma • Capital planning, automation, and financial management • New product introduction (process side) • Cross-functional collaboration and communication PI091ac2c33b34-9930
08/08/2026
Full time
Job Description Job Description Job Summary: The Director of Manufacturing Engineering is a hands-on leadership role and the process authority for how Butcher Power Products' switchboard and switchgear products are built. The person in this role must be the subject-matter expert who can also do the work - capable of designing and improving manufacturing processes and line layouts, building routings and process documentation, and personally leading process and PFMEA reviews - so they can teach and develop the manufacturing engineering team and set the standard for process quality. This role owns how products are built rather than what is designed; however, deep familiarity with the product and the production floor is essential. The Director must understand the design intent released by Product Engineering and the realities of the floor in order to engineer processes that are efficient, repeatable, and capable. This role works hand in hand with Product Engineering as the manufacturing voice in the design process, partners with Quality on process controls, and supports Production and Planning rather than owning them. Key Responsibilities: • Hands-On Process Engineering: Personally design, document, and improve the manufacturing processes, routings, work instructions, and line layouts that build the product. This is a working role: the successful candidate stays actively engaged in process design and technical problem-solving alongside the team rather than delegating all hands-on work. • Process Authority & Technical Review: Lead, critique, and approve the team's process designs, routings, PFMEAs, and control plans; set and enforce the standard for process quality, capability, and engineering rigor through formal process reviews. • Mentorship & Teaching: Coach, train, and develop manufacturing engineers and technicians in process design, tooling, DFM/DFA, Lean and Six Sigma, time studies, and structured problem-solving, raising the technical capability of the whole team. • Leadership & Management: Lead and manage the manufacturing engineering team, including hiring, development, workload balancing, priorities, and performance. • Process Strategy & Standardization: Own manufacturing process strategy and standardization across product lines, and define the tooling and capital equipment roadmap. • Product Engineering Partnership (DFM): Work closely and continuously with Product Engineering as the manufacturing voice in the design process - provide manufacturability and assembly feedback at design reviews before release, jointly resolve producibility issues, and ensure released designs transition cleanly into production. • Process Controls & Quality Partnership: Own the manufacturing side of PFMEAs and control plans in partnership with Quality Engineering; ensure processes are capable, controlled, and continuously monitored. • Continuous Improvement: Drive Lean, Six Sigma, and Kaizen across the function to improve throughput, cycle time, yield, and cost. • Capital, Tooling & Automation: Plan and justify capital equipment, tooling, and automation investments, and provide financial management of the manufacturing engineering capital and tooling budgets. • New Product Introduction (NPI): Lead the process side of NPI - develop and validate the processes, tooling, and routings that bring newly released designs into production. • Cross-Functional Collaboration: Partner with Production, Planning, Quality, Project Management, and Product Engineering on capacity, scheduling, and material flow, supporting these functions rather than owning them. • Safety & Compliance: Ensure manufacturing processes across the function comply with safety, environmental, and regulatory standards, including UL 891, NEC, and ANSI. Required Qualifications • Bachelor's degree in Manufacturing, Industrial, or Mechanical Engineering. • 8+ years of progressive process engineering (or directly related) experience, including significant time spent personally developing and improving manufacturing processes. • Hands-on proficiency in SolidWorks for process documentation, line layouts, and reviews; the ability to design tooling and fixtures in CAD is a plus. • Strong proficiency developing routings, work instructions, process documentation, and process controls. • Proven ability to lead formal process and PFMEA reviews and to mentor and train engineers and technicians. • Experience hiring, developing, and managing a manufacturing engineering team. • Strong working knowledge of PFMEA, control plans, SPC, and process capability (Cpk). • Deep knowledge of Lean Manufacturing, Six Sigma, and continuous improvement methodologies. • Strong understanding of the products being built and of how design intent translates into manufacturing process - sufficient product familiarity to engineer the right processes. • Working knowledge of UL 891 and related standards (NEC, ANSI) as they affect manufacturing processes. • Experience planning and justifying capital equipment and tooling investments, including financial management of budgets. • Hands-on fabrication and machining experience is a plus. • Automation experience is a plus. • Experience with structured problem-solving methods such as 8D or A3 is a plus. • Familiarity with ERP/MRP systems, particularly Microsoft Dynamics 365 (D365). • Excellent leadership, project management, and problem-solving skills. • Strong communication and interpersonal abilities. Preferred Qualifications • Hands-on manufacturing process design and improvement (CAD) • Process authority and engineering quality standards • Technical mentoring, teaching, and team development • Close partnership with Product Engineering (DFM) • Process strategy, standardization, and tooling roadmap • Design-for-manufacturability partnership • Process controls, PFMEA, and capability • Continuous improvement and Lean/Six Sigma • Capital planning, automation, and financial management • New product introduction (process side) • Cross-functional collaboration and communication PI091ac2c33b34-9930
Job Description Job Description Assembly Technician (Soldering Specialist) - Concord, NH About the Role Are you a precision-driven professional with a passion for high-quality electronic assembly? We are looking for a skilled Assembly Technician to join our production team in Concord, NH. This is a temp-to-perm opportunity, offering a clear path to a long-term career with our company for the right candidate. While this role involves assembly and some inspection, we are specifically looking for a "soldering pro"-someone who takes pride in their benchwork and has a steady hand for intricate surface mount assemblies. Because we value craftsmanship, a hands-on soldering test is a key part of our interview process. Compensation & Location Pay Rate: $22.00 - $25.00 per hour Location: Concord, NH Status: Temp-to-Perm (A great way to get your foot in the door and prove your skills!) What You'll Do Precision Assembly: Build, test, and refine electronic subassemblies and systems by following production drawings, work orders, and sample assemblies. Soldering & Rework: Perform high-level soldering and rework on surface mount (SMT) components, ensuring every joint meets IPC-610 workmanship standards. Technical Processes: Execute intermediate tasks including potting, encapsulating, epoxy bonding, and color-coding to ensure product durability. Quality Assurance: Conduct real-time "go/no-go" testing and inspections using microscopes and electronic test equipment to ensure every unit is built to print. Tool Mastery: Utilize a variety of specialized equipment, from soldering irons and hot plates to glue dispensing systems and water test tanks. What You Bring Technical Expertise: 1-2 years of experience in electronic assembly and inspection is preferred. Soldering Skills: Strong familiarity with SMT components and the ability to pass a practical soldering test. Attention to Detail: A commitment to IPC-610 standards and the ability to comprehend complex written and oral instructions. Bonus Points: Familiarity with tuning electronic components is a huge plus! Requirements High school diploma or G.E.D. Ability to work with hand tools, microscopes, and precision measuring instruments. A collaborative mindset and a drive to produce high-quality work. Company Description Ardent Staffing Solutions is a Massachusetts based temporary and permanent placement staffing agency specialized in skilled manufacturing, engineering, and administrative placements. We are relentlessly focused on our candidates with meaningful employment. Our friendly and helpful recruiters pride themselves on their ability to offer valuable support, advice and insight to give our candidates the best shot at landing the job! Check us out Company Description Ardent Staffing Solutions is a Massachusetts based temporary and permanent placement staffing agency specialized in skilled manufacturing, engineering, and administrative placements. We are relentlessly focused on our candidates with meaningful employment. Our friendly and helpful recruiters pride themselves on their ability to offer valuable support, advice and insight to give our candidates the best shot at landing the job! Check us out
08/08/2026
Full time
Job Description Job Description Assembly Technician (Soldering Specialist) - Concord, NH About the Role Are you a precision-driven professional with a passion for high-quality electronic assembly? We are looking for a skilled Assembly Technician to join our production team in Concord, NH. This is a temp-to-perm opportunity, offering a clear path to a long-term career with our company for the right candidate. While this role involves assembly and some inspection, we are specifically looking for a "soldering pro"-someone who takes pride in their benchwork and has a steady hand for intricate surface mount assemblies. Because we value craftsmanship, a hands-on soldering test is a key part of our interview process. Compensation & Location Pay Rate: $22.00 - $25.00 per hour Location: Concord, NH Status: Temp-to-Perm (A great way to get your foot in the door and prove your skills!) What You'll Do Precision Assembly: Build, test, and refine electronic subassemblies and systems by following production drawings, work orders, and sample assemblies. Soldering & Rework: Perform high-level soldering and rework on surface mount (SMT) components, ensuring every joint meets IPC-610 workmanship standards. Technical Processes: Execute intermediate tasks including potting, encapsulating, epoxy bonding, and color-coding to ensure product durability. Quality Assurance: Conduct real-time "go/no-go" testing and inspections using microscopes and electronic test equipment to ensure every unit is built to print. Tool Mastery: Utilize a variety of specialized equipment, from soldering irons and hot plates to glue dispensing systems and water test tanks. What You Bring Technical Expertise: 1-2 years of experience in electronic assembly and inspection is preferred. Soldering Skills: Strong familiarity with SMT components and the ability to pass a practical soldering test. Attention to Detail: A commitment to IPC-610 standards and the ability to comprehend complex written and oral instructions. Bonus Points: Familiarity with tuning electronic components is a huge plus! Requirements High school diploma or G.E.D. Ability to work with hand tools, microscopes, and precision measuring instruments. A collaborative mindset and a drive to produce high-quality work. Company Description Ardent Staffing Solutions is a Massachusetts based temporary and permanent placement staffing agency specialized in skilled manufacturing, engineering, and administrative placements. We are relentlessly focused on our candidates with meaningful employment. Our friendly and helpful recruiters pride themselves on their ability to offer valuable support, advice and insight to give our candidates the best shot at landing the job! Check us out Company Description Ardent Staffing Solutions is a Massachusetts based temporary and permanent placement staffing agency specialized in skilled manufacturing, engineering, and administrative placements. We are relentlessly focused on our candidates with meaningful employment. Our friendly and helpful recruiters pride themselves on their ability to offer valuable support, advice and insight to give our candidates the best shot at landing the job! Check us out
Job Description Job Description Job Title: Machine Assembler/ Test Technician Location: Warwick, RI Job Type: Full Time Shift: 1st shift Compensation: Commensurate with experience level Job Summary We are seeking a skilled and detail-oriented Machine Assembler Test Technician to join our production team. In this role, you will be responsible for building complex mechanical assemblies from blueprints, followed by running critical diagnostic and functional tests to ensure proper performance before shipment. If you have a strong mechanical aptitude and a passion for quality troubleshooting, we want to hear from you. Key Responsibilities Mechanical & Assembly: Assemble intricate terminating heads, sub-assemblies, and components according to engineering blueprints, schematics, and technical drawings. System Testing & Diagnostics: Conduct comprehensive functional, and mechanical testing on completed equipment to verify performance against specifications. Troubleshooting: Identify, diagnose, and resolve any mechanical or output issues discovered during testing. Quality Assurance: Ensure all assembled products meet company quality standards and safety regulations; document test results and quality check sheets. Collaboration: Work closely with engineers and tool makers to communicate recurring build issues and suggest process improvements. Qualifications & Skills Experience: 2+ years of experience in mechanical assembly, testing and technical troubleshooting (preferred). Technical Skills: Ability to read and interpret complex blueprints, and engineering diagrams. Computer literacy is a must. Tools: Proficiency with standard hand tools and precision measuring equipment (e.g., calipers, micrometers). Physical Requirements: Ability to lift up to 25 lbs. and perform tasks requiring manual dexterity. Education: High School Diploma or equivalent required; technical degree or certification in Mechatronics or Automation is a strong plus. What We Offer Competitive hourly pay with overtime opportunities / shift differentials . Comprehensive benefits package (Medical, Dental, Vision). 401(k) matching and paid time off (PTO) . Clean, safe, and climate-controlled manufacturing environment. Clear pathways for career advancement and technical training. Company Description Your Complete Satisfaction is Our Number One Goal Since 1978, we have specialized in supplying temporary and direct hire staffing to Rhode Island corporations of all types - including banks, hospitals, manufacturing firms, colleges, professional and legal firms, and governmental agencies. Company Description Your Complete Satisfaction is Our Number One Goal Since 1978, we have specialized in supplying temporary and direct hire staffing to Rhode Island corporations of all types - including banks, hospitals, manufacturing firms, colleges, professional and legal firms, and governmental agencies.
08/08/2026
Full time
Job Description Job Description Job Title: Machine Assembler/ Test Technician Location: Warwick, RI Job Type: Full Time Shift: 1st shift Compensation: Commensurate with experience level Job Summary We are seeking a skilled and detail-oriented Machine Assembler Test Technician to join our production team. In this role, you will be responsible for building complex mechanical assemblies from blueprints, followed by running critical diagnostic and functional tests to ensure proper performance before shipment. If you have a strong mechanical aptitude and a passion for quality troubleshooting, we want to hear from you. Key Responsibilities Mechanical & Assembly: Assemble intricate terminating heads, sub-assemblies, and components according to engineering blueprints, schematics, and technical drawings. System Testing & Diagnostics: Conduct comprehensive functional, and mechanical testing on completed equipment to verify performance against specifications. Troubleshooting: Identify, diagnose, and resolve any mechanical or output issues discovered during testing. Quality Assurance: Ensure all assembled products meet company quality standards and safety regulations; document test results and quality check sheets. Collaboration: Work closely with engineers and tool makers to communicate recurring build issues and suggest process improvements. Qualifications & Skills Experience: 2+ years of experience in mechanical assembly, testing and technical troubleshooting (preferred). Technical Skills: Ability to read and interpret complex blueprints, and engineering diagrams. Computer literacy is a must. Tools: Proficiency with standard hand tools and precision measuring equipment (e.g., calipers, micrometers). Physical Requirements: Ability to lift up to 25 lbs. and perform tasks requiring manual dexterity. Education: High School Diploma or equivalent required; technical degree or certification in Mechatronics or Automation is a strong plus. What We Offer Competitive hourly pay with overtime opportunities / shift differentials . Comprehensive benefits package (Medical, Dental, Vision). 401(k) matching and paid time off (PTO) . Clean, safe, and climate-controlled manufacturing environment. Clear pathways for career advancement and technical training. Company Description Your Complete Satisfaction is Our Number One Goal Since 1978, we have specialized in supplying temporary and direct hire staffing to Rhode Island corporations of all types - including banks, hospitals, manufacturing firms, colleges, professional and legal firms, and governmental agencies. Company Description Your Complete Satisfaction is Our Number One Goal Since 1978, we have specialized in supplying temporary and direct hire staffing to Rhode Island corporations of all types - including banks, hospitals, manufacturing firms, colleges, professional and legal firms, and governmental agencies.
Connexion Systems and Engineering, Inc.
Albion, Rhode Island
Job Description Job Description Manufacturing Assembly Technician - 1st Shift Location: Providence, RI Pay: $21/hr.; $23/hr. with soldering experience Schedule: Monday-Friday, 7:00 a.m.-3:30 p.m. Job Type: 3-4-month contract with potential to extend or convert to permanent employment A medical device manufacturing company in Providence is looking for a Manufacturing Assembly Technician to perform hands-on mechanical and electromechanical assembly. This is an assembly-focused position, not a traditional machine operator role. Candidates should have experience working in a manufacturing or production assembly environment, following detailed procedures and using basic computer systems. Responsibilities Assemble small mechanical and electromechanical devices using hand tools Follow written work instructions, SOPs and blueprints Perform visual, in-process and final inspections Complete production records and manufacturing documentation Enter and review information using computer-based systems Follow quality, safety, GMP and ISO procedures Maintain a clean and organized work area Assist with inventory control and material handling as needed Report production or quality concerns to the appropriate lead or supervisor Qualifications High school diploma or GED At least six months of manufacturing, production or assembly experience preferred Experience working in an assembly-line or production environment Comfortable using computers and learning new software Able to read and follow detailed written instructions Comfortable using basic hand tools Strong attention to detail and manual dexterity Reliable attendance and punctuality Able to work Monday-Friday from 7:00 a.m.-3:30 p.m. Comfortable with an initial 3-4-month contract assignment Preferred Experience Soldering experience Medical device manufacturing Electromechanical or small-parts assembly Cleanroom or regulated manufacturing GMP or ISO procedures Visual inspection or manufacturing documentation Candidates with soldering experience are eligible for the higher pay rate. Training will be provided on company procedures, regulated manufacturing requirements and internal computer systems. The position may require standing for extended periods, wearing protective equipment and lifting or moving materials weighing approximately 10-30 pounds.
08/08/2026
Full time
Job Description Job Description Manufacturing Assembly Technician - 1st Shift Location: Providence, RI Pay: $21/hr.; $23/hr. with soldering experience Schedule: Monday-Friday, 7:00 a.m.-3:30 p.m. Job Type: 3-4-month contract with potential to extend or convert to permanent employment A medical device manufacturing company in Providence is looking for a Manufacturing Assembly Technician to perform hands-on mechanical and electromechanical assembly. This is an assembly-focused position, not a traditional machine operator role. Candidates should have experience working in a manufacturing or production assembly environment, following detailed procedures and using basic computer systems. Responsibilities Assemble small mechanical and electromechanical devices using hand tools Follow written work instructions, SOPs and blueprints Perform visual, in-process and final inspections Complete production records and manufacturing documentation Enter and review information using computer-based systems Follow quality, safety, GMP and ISO procedures Maintain a clean and organized work area Assist with inventory control and material handling as needed Report production or quality concerns to the appropriate lead or supervisor Qualifications High school diploma or GED At least six months of manufacturing, production or assembly experience preferred Experience working in an assembly-line or production environment Comfortable using computers and learning new software Able to read and follow detailed written instructions Comfortable using basic hand tools Strong attention to detail and manual dexterity Reliable attendance and punctuality Able to work Monday-Friday from 7:00 a.m.-3:30 p.m. Comfortable with an initial 3-4-month contract assignment Preferred Experience Soldering experience Medical device manufacturing Electromechanical or small-parts assembly Cleanroom or regulated manufacturing GMP or ISO procedures Visual inspection or manufacturing documentation Candidates with soldering experience are eligible for the higher pay rate. Training will be provided on company procedures, regulated manufacturing requirements and internal computer systems. The position may require standing for extended periods, wearing protective equipment and lifting or moving materials weighing approximately 10-30 pounds.
Job Description Job Description Pay: $18.00 - $24.00 per hour Job description: A/C Technician/Assembly $18 - $24 Depending Upon Experience Monday - Friday 6am - 2:30pm Savvy Staffing is seeking experienced A/C Technicians to join our reputable clients' team in their Assembly/Packing team. This is a great opportunity for someone who enjoys hands-on work, learning new skills, and building a long-term career in a stable production environment. Full-Time, Non-Exempt Position Competitive pay based on experience Opportunities for overtime as available Factory production environment with steady workflow What You'll Do As an A/C Technician, you'll be responsible for assembling compact air conditioning units by working with a variety of small to medium components. You'll use both hand and power tools to complete precise fitting, alignment, and assembly tasks. Day-to-day responsibilities include: Assembling compact A/C units following work instructions and safety standards Positioning, fitting, and aligning components for proper function and clearance Performing quality checks on parts and finished assemblies Making final adjustments and basic operational testing Maintaining a clean and organized work area Following production schedules and reporting any issues to supervision Recording work and production time accurately What We're Looking For High school diploma preferred (or equivalent ability to read/write and follow instructions) Entry-level friendly - will train the right candidate Previous warehouse or manufacturing experience (6 months preferred, not required) Strong attention to detail and ability to follow direction Good hand-eye coordination and mechanical aptitude Team-oriented attitude and willingness to learn HVAC basics Ability to work in a factory environment with moderate to high noise levels Requirements & Physical Demands Ability to lift up to 50 lbs occasionally Standing, bending, and reaching throughout shift Use of hand tools and basic equipment Must wear required PPE: safety glasses and steel-toe shoes Must be able to work safely and follow all company safety procedures Bonus Opportunity Employer will train you to pass the EPA Section 608 certification for refrigerant handling Skilled employees may have opportunities to help train new hires Stable manufacturing environment with long-term growth potential Why This Role Stands Out Hands-on, skill-building position in a growing production environment Great opportunity for candidates looking to enter HVAC or manufacturing trades Supportive team culture and on-the-job training provided Room to grow with experience and performance If you're reliable, eager to learn, and ready to build a career in manufacturing and HVAC assembly, this is a great place to start.
08/08/2026
Full time
Job Description Job Description Pay: $18.00 - $24.00 per hour Job description: A/C Technician/Assembly $18 - $24 Depending Upon Experience Monday - Friday 6am - 2:30pm Savvy Staffing is seeking experienced A/C Technicians to join our reputable clients' team in their Assembly/Packing team. This is a great opportunity for someone who enjoys hands-on work, learning new skills, and building a long-term career in a stable production environment. Full-Time, Non-Exempt Position Competitive pay based on experience Opportunities for overtime as available Factory production environment with steady workflow What You'll Do As an A/C Technician, you'll be responsible for assembling compact air conditioning units by working with a variety of small to medium components. You'll use both hand and power tools to complete precise fitting, alignment, and assembly tasks. Day-to-day responsibilities include: Assembling compact A/C units following work instructions and safety standards Positioning, fitting, and aligning components for proper function and clearance Performing quality checks on parts and finished assemblies Making final adjustments and basic operational testing Maintaining a clean and organized work area Following production schedules and reporting any issues to supervision Recording work and production time accurately What We're Looking For High school diploma preferred (or equivalent ability to read/write and follow instructions) Entry-level friendly - will train the right candidate Previous warehouse or manufacturing experience (6 months preferred, not required) Strong attention to detail and ability to follow direction Good hand-eye coordination and mechanical aptitude Team-oriented attitude and willingness to learn HVAC basics Ability to work in a factory environment with moderate to high noise levels Requirements & Physical Demands Ability to lift up to 50 lbs occasionally Standing, bending, and reaching throughout shift Use of hand tools and basic equipment Must wear required PPE: safety glasses and steel-toe shoes Must be able to work safely and follow all company safety procedures Bonus Opportunity Employer will train you to pass the EPA Section 608 certification for refrigerant handling Skilled employees may have opportunities to help train new hires Stable manufacturing environment with long-term growth potential Why This Role Stands Out Hands-on, skill-building position in a growing production environment Great opportunity for candidates looking to enter HVAC or manufacturing trades Supportive team culture and on-the-job training provided Room to grow with experience and performance If you're reliable, eager to learn, and ready to build a career in manufacturing and HVAC assembly, this is a great place to start.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
Job Description Shift 3rd Shift Description Supervise immediate and short-term maintenance goals. Assign work orders and ensure completion of repairs. Perform lock out/tag out certifications on equipment. Recognize and reward Technicians, while counseling performance issues. Perform safety checks. Provide mentorship, motivation, training and professional development, helping your team to optimize their performance and growth. Assign work orders, and follow up ensuring completion. Manage and oversee required paperwork. All other relevant duties to the job. Requirements 3+ years supervisory experience within a manufacturing maintenance environment required. 5+ years maintenance experience in a manufacturing environment required; preferrably within a poultry manufacturing facility. Excellent leadship skills with ability to provide positive reinforcement. Physical Requirements Typical office environment within a manufacturing plant utilizing computers, telephones and other office equipment. Frequently sit for long periods. Occasionally lift up to 25 lbs. May be exposed to noise (>85 decibels), CO2, and moving production lines. May be exposed to damp, wet, and cold environments. Work around live and/or raw animal odors. Benefits Information Benefits Eligibility Varies Paid Time Off 401k Savings Plan Health, Dental and Vision Insurance Short-Term and Long-Term Disability Insurance FREE $25,000 life insurance policy with additional life insurance programs available Company Sponsored Purchasing Program Perks & Bonuses: On-the-Job Training Provided Weekly Pay Check Promotional Career Opportunities All required Personal Protection Equipment is provided Company Cook-Outs, Safety Rewards, Giveaways, etc. Come be a part of a Family Oriented Company that offers so much more!
08/08/2026
Full time
Job Description Shift 3rd Shift Description Supervise immediate and short-term maintenance goals. Assign work orders and ensure completion of repairs. Perform lock out/tag out certifications on equipment. Recognize and reward Technicians, while counseling performance issues. Perform safety checks. Provide mentorship, motivation, training and professional development, helping your team to optimize their performance and growth. Assign work orders, and follow up ensuring completion. Manage and oversee required paperwork. All other relevant duties to the job. Requirements 3+ years supervisory experience within a manufacturing maintenance environment required. 5+ years maintenance experience in a manufacturing environment required; preferrably within a poultry manufacturing facility. Excellent leadship skills with ability to provide positive reinforcement. Physical Requirements Typical office environment within a manufacturing plant utilizing computers, telephones and other office equipment. Frequently sit for long periods. Occasionally lift up to 25 lbs. May be exposed to noise (>85 decibels), CO2, and moving production lines. May be exposed to damp, wet, and cold environments. Work around live and/or raw animal odors. Benefits Information Benefits Eligibility Varies Paid Time Off 401k Savings Plan Health, Dental and Vision Insurance Short-Term and Long-Term Disability Insurance FREE $25,000 life insurance policy with additional life insurance programs available Company Sponsored Purchasing Program Perks & Bonuses: On-the-Job Training Provided Weekly Pay Check Promotional Career Opportunities All required Personal Protection Equipment is provided Company Cook-Outs, Safety Rewards, Giveaways, etc. Come be a part of a Family Oriented Company that offers so much more!
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
Job Description Shift 2nd Shift Description THIS IS A 2ND SHIFT POSITION WITH APPROXIMATE WORK HOURS OF 4:15PM TO 12:45AM. Responsible for supporting daily maintenance operations, and providing oversight for Supervisors and Technicians. Ensure compliance with SOPs, HACCP, HAZMAT. Ensure maintenance and repairs meet Company, state and federal policies and procedures. Work with supervisors to maximize equipment reliability while minimizing costs. All other relevant duties to the job. Requirements High School Diploma required. 3+ years supervisory experience required. 4+ years maintenance experience in a manufacturing environment required. Excellent leadership skills with ability to provide positive reinforcement. Excellent organization skills. Physical Requirements Constantly stand and/or walk throughout shift. Exposure to noise (>85 decibels), CO2, and moving production lines. Exposure to heat (99 F, 37 C) and cold (45 F, 4 C). Exposure to damp, wet and cold environments. Regularly lift 25+ lbs. Work around live and/or raw animal odors. Benefits Information Benefits Eligibility Varies Paid Time Off 401k Savings Plan Health, Dental and Vision Insurance Short-Term and Long-Term Disability Insurance FREE $25,000 life insurance policy with additional life insurance programs available Company Sponsored Purchasing Program Perks & Bonuses: On-the-Job Training Provided Weekly Pay Check Promotional Career Opportunities All required Personal Protection Equipment is provided Company Cook-Outs, Safety Rewards, Giveaways, etc. Come be a part of a Family Oriented Company that offers so much more!
08/08/2026
Full time
Job Description Shift 2nd Shift Description THIS IS A 2ND SHIFT POSITION WITH APPROXIMATE WORK HOURS OF 4:15PM TO 12:45AM. Responsible for supporting daily maintenance operations, and providing oversight for Supervisors and Technicians. Ensure compliance with SOPs, HACCP, HAZMAT. Ensure maintenance and repairs meet Company, state and federal policies and procedures. Work with supervisors to maximize equipment reliability while minimizing costs. All other relevant duties to the job. Requirements High School Diploma required. 3+ years supervisory experience required. 4+ years maintenance experience in a manufacturing environment required. Excellent leadership skills with ability to provide positive reinforcement. Excellent organization skills. Physical Requirements Constantly stand and/or walk throughout shift. Exposure to noise (>85 decibels), CO2, and moving production lines. Exposure to heat (99 F, 37 C) and cold (45 F, 4 C). Exposure to damp, wet and cold environments. Regularly lift 25+ lbs. Work around live and/or raw animal odors. Benefits Information Benefits Eligibility Varies Paid Time Off 401k Savings Plan Health, Dental and Vision Insurance Short-Term and Long-Term Disability Insurance FREE $25,000 life insurance policy with additional life insurance programs available Company Sponsored Purchasing Program Perks & Bonuses: On-the-Job Training Provided Weekly Pay Check Promotional Career Opportunities All required Personal Protection Equipment is provided Company Cook-Outs, Safety Rewards, Giveaways, etc. Come be a part of a Family Oriented Company that offers so much more!
JOB SUMMARY Do you have expertise in repairing injection molding equipment in a manufacturing setting? Jabil has an exciting opportunity for experienced Maintenance Technicians in Atlanta, GA! Multiple shifts and a sign-on bonus are available! How will you make an impact? In this role, you will be performing complex maintenance and repairs on electrical, mechanical, pneumatic, and/or hydraulic plant equipment including injection molding machinery. Second Shift 3pm -11:30 pm, Mon - Fri, on-call coverage as well Pay: $30 DOE + Quarterly bonuses based on performance Sign-On Bonus Up to $1,500 Competitive Benefits This position will not offer visa sponsorship. What will you do? Performs routine preventive maintenance and emergency mechanical, hydraulic, pneumatic, and electrical maintenance on production systems and equipment, using knowledge of electrical-mechanical devices, circuitry, electronics, motors, wiring diagrams, schematics, and blueprints. Troubleshoots, repairs, aligns, calibrates, inspects, and tests a variety of production systems and equipment. Performing hydraulic, pneumatic, high voltage electrical, and mechanical repairs on Injection molding equipment. Set up assembly line equipment within established parameters. Assists in installing new equipment and in moving equipment to new locations. Disassembles machines and parts and adjusts repairs or replaces defective parts and materials. Uses a variety of basic hand and power tools and equipment including hand drill, bench grinder, and band saw. Instruct the Production Team on the proper use of equipment. Maintains appropriate maintenance and repair logs. Cleans and lubricates parts and equipment as scheduled. Learns all aspects of machine maintenance and becomes cross-trained in all areas of molding/assembly equipment. Requisitions parts needed for completion of preventive maintenance responsibilities. Support all company safety and quality programs and initiatives. Other responsibilities may be assigned from time to time as needed, based on the evolution of the company and the requirements of the department/position. How will you get here? Education: High School Diploma/GED. Experience: 5 years of experience in manufacturing equipment maintenance. Maintenance experience repairing plastic injection molding equipment Requires solid experience in repairing mechanical, electrical, hydraulic, and pneumatic systems. Solid knowledge of mechanical equipment and electrical and hydraulic drawings. Mechanical and electrical troubleshooting, diagnosis, and repair. Ability to read and write English and interpret documents such as technical manuals, blueprints, safety rules, operating instructions, and procedure manuals. Knowledge and ability to use relevant hand tools in the repair of equipment. What can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities Quarterly bonus opportunities
08/08/2026
Full time
JOB SUMMARY Do you have expertise in repairing injection molding equipment in a manufacturing setting? Jabil has an exciting opportunity for experienced Maintenance Technicians in Atlanta, GA! Multiple shifts and a sign-on bonus are available! How will you make an impact? In this role, you will be performing complex maintenance and repairs on electrical, mechanical, pneumatic, and/or hydraulic plant equipment including injection molding machinery. Second Shift 3pm -11:30 pm, Mon - Fri, on-call coverage as well Pay: $30 DOE + Quarterly bonuses based on performance Sign-On Bonus Up to $1,500 Competitive Benefits This position will not offer visa sponsorship. What will you do? Performs routine preventive maintenance and emergency mechanical, hydraulic, pneumatic, and electrical maintenance on production systems and equipment, using knowledge of electrical-mechanical devices, circuitry, electronics, motors, wiring diagrams, schematics, and blueprints. Troubleshoots, repairs, aligns, calibrates, inspects, and tests a variety of production systems and equipment. Performing hydraulic, pneumatic, high voltage electrical, and mechanical repairs on Injection molding equipment. Set up assembly line equipment within established parameters. Assists in installing new equipment and in moving equipment to new locations. Disassembles machines and parts and adjusts repairs or replaces defective parts and materials. Uses a variety of basic hand and power tools and equipment including hand drill, bench grinder, and band saw. Instruct the Production Team on the proper use of equipment. Maintains appropriate maintenance and repair logs. Cleans and lubricates parts and equipment as scheduled. Learns all aspects of machine maintenance and becomes cross-trained in all areas of molding/assembly equipment. Requisitions parts needed for completion of preventive maintenance responsibilities. Support all company safety and quality programs and initiatives. Other responsibilities may be assigned from time to time as needed, based on the evolution of the company and the requirements of the department/position. How will you get here? Education: High School Diploma/GED. Experience: 5 years of experience in manufacturing equipment maintenance. Maintenance experience repairing plastic injection molding equipment Requires solid experience in repairing mechanical, electrical, hydraulic, and pneumatic systems. Solid knowledge of mechanical equipment and electrical and hydraulic drawings. Mechanical and electrical troubleshooting, diagnosis, and repair. Ability to read and write English and interpret documents such as technical manuals, blueprints, safety rules, operating instructions, and procedure manuals. Knowledge and ability to use relevant hand tools in the repair of equipment. What can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities Quarterly bonus opportunities
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
08/08/2026
Full time
New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift Available: 2nd Compensation: $28.50-$41.00/hr Sign-On Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information $2 shift differential (2:00pm - 6:00am) $3.00/hr Weekly Perfect Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Maintain ammonia refrigeration system and training: Chemical testing and treatment of the evaporative condenser water Perform daily monitoring of the system through walk arounds and trend graphs Optimize ammonia operations through the use of the Logix system Oversee of training for Maintenance techs to build and maintain operator levels Writing and review of task procedures, PM's and SOP's for operation of equipment and system Support in PSM compliance audits Maintain Plant equipment and other work: Maintain PIT license Display knowledge of the boiler system. Troubleshoot and diagnose mechanical problems and provide follow-up Work with supervisor/production to promote quality and yield improvements Complete schedule daily work Assist in wastewater operation when needed Work on air compressor systems and HVAC equipment as needed Complete necessary documentation related to completion of Work Orders and applicable PSM Elements Any other duties as assigned Required Qualifications Eligible to work in the United States without Visa sponsorship Must be able to work in the US without an humanitarian Parole status related to Cuba, Haiti, Nicaragua or Venezuela which is subject to the Federal Register Notice of revocation by DHS on March 25, 2025 Must be 18 years or older High School Diploma or GED Equivalent Understanding of Anhydrous Ammonia Refrigeration systems Have the Ammonia Refrigeration Systems Certification - Operator Level 1 Able to wear a full face breathing respirator mask Willing to be a part of the Hazmat team Have at least 3 years industrial maintenance experience Have a strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, ladder logic and wiring schematics Possess an extremely strong personal safety philosophy, able to follow all safety policies & procedures, seek out & correct unsafe conditions Ability to understand and learn Evaporative Condenser water chemistry Able to work weekends as needed Preferred Qualifications Computer literacy and eagerness to learn SAP/PPE systems Maintenance experience in a food processing environment Understanding of waste water system HVAC System Experience Boiler Experience Compressed Air Systems Operating Experience Able to effectively use typical test and calibration equipment including , RTD calibrators, digital multi-meters, 4to 20 ma calibration unit, etc. Ability to troubleshoot 480 VAC 3-phase motor controls , 120 VAC and 24VDC control circuits Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
A-1 Termite and Pest Control, Inc.
Lenoir, North Carolina
Crawlspace Lead Technician - Lenoir, NC $22-$25/hour Lead the crew, own the quality, and set the standard for every crawlspace we touch. A-1 Termite & Pest Control is hiring a full-time Crawlspace Lead Technician in Lenoir, NC, serving the surrounding area. This is a hands-on leadership role for an experienced professional who can take ownership of job quality, production, safety, and team development. Location: Lenoir, NC Compensation: $22-$25 per hour, based on relevant experience Schedule: Monday-Friday, 7:30 a.m.-5:00 p.m., with occasional Saturdays during peak season. Overtime may be required. Benefits: Health, dental, and vision insurance; $10,000 in company-paid life insurance; paid holidays; and up to two weeks of accrued PTO. A-1 Termite & Pest Control is seeking an experienced, detail-driven Crawlspace Lead Technician to run jobs from start to finish and mentor our encapsulation crews. If you take pride in leading from the front, solving problems in the field, and delivering work that is complete, clean, and customer-ready, this is your kind of job. What You'll Do Lead encapsulation and moisture-control jobs on site, directing a crew of one or more technicians. Read and execute job scopes, ensuring every installation meets A-1's safety, quality, and workmanship standards. Install and troubleshoot vapor barriers, liners, dehumidifiers, sump pumps, drainage systems, foundation-vent sealing, and rim-joist insulation. Identify moisture, standing-water, airflow, humidity, and wood-destroying-organism-related conditions and complete approved corrective work within the job scope. Perform approved structural repairs, including subfloor and support work, as needed. Perform final quality inspections and confirm each job is complete, clean, and customer-ready. Train, coach, and develop technicians on proper technique, safety, and professionalism. Manage materials, tools, and job-site logistics to keep crews productive and on schedule. Serve as the on-site point of contact for homeowners, handling questions and concerns professionally. Report job status, issues, and material needs to the branch or division manager. What We're Looking For At least two years of relevant experience in crawlspace encapsulation, waterproofing, construction, insulation, pest control, or a closely related trade. Experience leading crews or taking ownership of jobs from start to finish. Working knowledge of crawlspace moisture control, vapor-barrier installation, drainage systems, dehumidifiers, and common structural repairs. Strong problem-solving skills and the judgment to make sound decisions in the field. Excellent communication and customer-service skills. Comfortable working safely in tight, low-clearance spaces and varying temperatures. Ability to lift 50+ lbs., kneel, crawl, work on your hands and knees for extended periods, and perform the same physical work you lead. Valid driver's license and a driving record that meets company vehicle-insurance requirements. Ability to maintain a neat, customer-ready appearance and follow the company dress code. Ability to report daily to the Lenoir office and travel to customer locations throughout the surrounding service area. Availability for occasional Saturdays during peak season. What We Offer Competitive lead-level pay of $22-$25 per hour, based on relevant experience. Paid training and the tools, equipment, and support to do the job right. A company vehicle for job-related travel; it must be picked up from and returned to our Lenoir office each workday. A stable, growing company with a clear path for advancement as our Crawlspace Division grows. The chance to build and lead a crew that does the job right-every time. If you're ready to lead, we're ready to talk. Apply today. A-1 Termite & Pest Control is an Equal Opportunity Employer. Employment is contingent upon successfully completing required background and drug screenings. Compensation details: 22-25 Hourly Wage PIacb-4404
08/08/2026
Full time
Crawlspace Lead Technician - Lenoir, NC $22-$25/hour Lead the crew, own the quality, and set the standard for every crawlspace we touch. A-1 Termite & Pest Control is hiring a full-time Crawlspace Lead Technician in Lenoir, NC, serving the surrounding area. This is a hands-on leadership role for an experienced professional who can take ownership of job quality, production, safety, and team development. Location: Lenoir, NC Compensation: $22-$25 per hour, based on relevant experience Schedule: Monday-Friday, 7:30 a.m.-5:00 p.m., with occasional Saturdays during peak season. Overtime may be required. Benefits: Health, dental, and vision insurance; $10,000 in company-paid life insurance; paid holidays; and up to two weeks of accrued PTO. A-1 Termite & Pest Control is seeking an experienced, detail-driven Crawlspace Lead Technician to run jobs from start to finish and mentor our encapsulation crews. If you take pride in leading from the front, solving problems in the field, and delivering work that is complete, clean, and customer-ready, this is your kind of job. What You'll Do Lead encapsulation and moisture-control jobs on site, directing a crew of one or more technicians. Read and execute job scopes, ensuring every installation meets A-1's safety, quality, and workmanship standards. Install and troubleshoot vapor barriers, liners, dehumidifiers, sump pumps, drainage systems, foundation-vent sealing, and rim-joist insulation. Identify moisture, standing-water, airflow, humidity, and wood-destroying-organism-related conditions and complete approved corrective work within the job scope. Perform approved structural repairs, including subfloor and support work, as needed. Perform final quality inspections and confirm each job is complete, clean, and customer-ready. Train, coach, and develop technicians on proper technique, safety, and professionalism. Manage materials, tools, and job-site logistics to keep crews productive and on schedule. Serve as the on-site point of contact for homeowners, handling questions and concerns professionally. Report job status, issues, and material needs to the branch or division manager. What We're Looking For At least two years of relevant experience in crawlspace encapsulation, waterproofing, construction, insulation, pest control, or a closely related trade. Experience leading crews or taking ownership of jobs from start to finish. Working knowledge of crawlspace moisture control, vapor-barrier installation, drainage systems, dehumidifiers, and common structural repairs. Strong problem-solving skills and the judgment to make sound decisions in the field. Excellent communication and customer-service skills. Comfortable working safely in tight, low-clearance spaces and varying temperatures. Ability to lift 50+ lbs., kneel, crawl, work on your hands and knees for extended periods, and perform the same physical work you lead. Valid driver's license and a driving record that meets company vehicle-insurance requirements. Ability to maintain a neat, customer-ready appearance and follow the company dress code. Ability to report daily to the Lenoir office and travel to customer locations throughout the surrounding service area. Availability for occasional Saturdays during peak season. What We Offer Competitive lead-level pay of $22-$25 per hour, based on relevant experience. Paid training and the tools, equipment, and support to do the job right. A company vehicle for job-related travel; it must be picked up from and returned to our Lenoir office each workday. A stable, growing company with a clear path for advancement as our Crawlspace Division grows. The chance to build and lead a crew that does the job right-every time. If you're ready to lead, we're ready to talk. Apply today. A-1 Termite & Pest Control is an Equal Opportunity Employer. Employment is contingent upon successfully completing required background and drug screenings. Compensation details: 22-25 Hourly Wage PIacb-4404
