245 jobs found

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking Structures and Payloads Design Engineers (Associate) to join our Seats Integration Team in North Charleston, South Carolina. This role is focused on installation and delivery support, resolving emergent build issues, and ensuring seats are installed, certified, and delivered on schedule and to specification. You will be the technical point of contact during aircraft installation and delivery campaigns-working hands on with factory teams, suppliers, and airline customers to resolve in flightline and emergent build issues that impact schedule, safety, or compliance. Your work directly enables safe handovers of aircraft to customers and drives continuous improvement in installation processes and supplier deliverables. You will be the part of the engineering team, working aircraft installation and delivery campaigns-working hands on with factory teams, suppliers, and airline customers to resolve in flightline and emergent build issues that impact schedule, safety, or compliance. Your work directly enables safe handovers of aircraft to customers and drives continuous improvement in installation processes and supplier deliverables. Primary Responsibilities Provide day to day installation and delivery engineering support during build, outfitting, and final delivery activities Rapid technical troubleshooting and root cause resolution for emergent build issues related to seat installation, interfaces, and systems Coordinate corrective actions with suppliers, production teams, IPTs, and ground operations to minimize schedule impact and ensure compliance Author and release engineering dispositions, field fixes, and installation procedures to support on wing and factory fixes Review supplier technical data and installation packages to ensure readiness for factory implementation and delivery acceptance Support aircraft acceptance events with airline customers, validate installation quality, and close out delivery nonconformances Prepare and maintain compliance documentation and summary reports tied to delivery milestones and certification requirements Capture lessons learned from emergent issues and drive design or process changes to prevent recurrence Interface with regulatory authorities (including FAA) as needed for dispositioning issues affecting certification or delivery Support IPTs to align priorities, schedule tradeoffs, risk mitigation, and supplier corrective action plans Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 2+ years of experience in engineering, including design, integration, and/or certification or equivalent combination of additional education and relevant experience. Preferred Qualifications (Desired Skills/Experience): Hands on installation and delivery support for aircraft interiors or seat systems in a production or final assembly environment Rapid troubleshooting and resolution of emergent build or field issues Working directly with suppliers, airline customers, and production/factory teams Familiarity with regulatory compliance and certification implications of installation issues Experience authoring engineering dispositions, field fixes, or installation work instructions Willingness to travel domestically and internationally for supplier or customer support Ability to work under pressure, prioritize multiple delivery issues, and communicate concise technical status to leadership and customers Proficiency with 3 D CAD and common engineering documentation tools preferred Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range- Associate Level: 85,000-115,000 Applications for this position will be accepted until Jul. 16, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is currently seeking an Composite Technical Analyst to support our Composite Materials & Structures (CMS) team located in North Charleston, SC. Our teams are currently hiring for a broad range of experience levels including: Associate, and Experienced level Composite Technical Analyst. CMS is a research and development organization within the Engineering & Technology Innovation (E&TI) division focused on technology development of composite fabrication techniques and next generation material systems. The team matures technology through testing, analysis, and demonstration for the intent of transitioning to existing or future Boeing platforms. In our state-of-the-art composite fabrication labs, our engineers and technical analysts lead and execute a variety of composite materials & fabrication development projects, transforming ideas into reality. We work closely with other E&TI groups, Boeing Commercial Airlines (BCA) Product Development (PD),BCA Airplane Program teams, and Boeing Defense & Space counterparts to identify, develop and transition technology needs to Boeing products. As a Composites Technical Analyst, you will work both independently and collaborate with experienced peers to conduct hands-on composite material testing and analysis, fabricate developmental parts and/or test articles, and execute laboratory operations to support the use of new materials, processes, and tools in the engineering and manufacture of products. The chosen candidate will be motivated, self-driven and will have excellent written and verbal communication skills. The ideal candidate will possess strong experience in structural testing (ex. tension/compression testing), hand layup of composite materials, and other composite forming/fabrication processes. This is an on-site position, and you will be expected to spend most of your time in a laboratory environment. We are a collaborative team, therefore you will work with cross-functional teammates including Material Processes & Physics (MP&P) Engineers, Design & Structural Engineers, Quality Engineers & Inspectors, Test Engineers & Operators, Assembly Mechanics, and support teams, so a collaborative attitude and the willingness to work together are vital to our team's success. Position Responsibilities: Collaborate with a highly motivated team of engineers and technicians to fabricate test and manufacturing demonstration articles via layups, bagging and cure. Perform analysis and evaluation of parts and/or test articles through research and testing to ensure safety, reliability and adherence to requirements and specifications. Support continuous improvement of products and processes by working with engineers and fellow technicians on the design, development, fabrication, testing, evaluation and implementation of new concepts and technology. Take ownership of testing and analysis equipment, including, but not limited to, scheduling preventative maintenance, safety upgrades, and calibration (where applicable) Support the training and development of others. Maintain clean and organized workspaces in accordance with lab housekeeping guidelines and 5S standards. Basic Qualifications (Required Skills/ Experience): Associate's degree or certificate degree or equivalent years of experience 1+ years of experience with hands on fiber reinforced composite layup 1+ years of experience reading and interpreting engineering documents and drawings 1+ years of experience working in a laboratory or production environment Preferred Qualifications (Desired Skills/Experience): Ability to utilize CATIA for interrogation of part geometries Willingness to work in a dynamic setting with shifting daily priorities Inter-personal communication skills Analytical skills Familiarization with Microsoft Office applications Ability to collaborate with others Travel: Position may require travel up to 10% of the time. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range for Associate Level (Level 2): $53,550 -$72,450 Summary Pay Range for Experienced (Level 3): $64,600 - $87,400 Applications for this position will be accepted until Jul. 30, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Associate's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is currently seeking an Assembler (LevelB) to join the Propulsion Team in Ladson, South Carolina on Variable shift. Position Responsibilities: Perform routine production assembly operations on structural parts, mechanical assemblies, sub-assemblies, and equipment using manual or automated assembly tools Model a culture of One Team, Pride, and Ownership Partner with Integrated Build Teams (IBTs) and Team Leaders to mitigate performance risks using Systematic Problem Solving (SPS) methodologies Identify roadblocks and production constraints; escalate unresolved issues through open and clear communication Use KPI and BPS principles to improve production flow and work environment Support overtime as required to meet customer commitments Participate in Lean Manufacturing Systems (LMS) and 5S activities Support teammates by providing cross-training and mentoring to improve overall team performance This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Ladson, SC (PSC) Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): Availability to work variable shifts, with the understanding that your assigned shift will not be confirmed until after training 1+ year experience in manufacturing, fabrication, or assembly processes and procedures 1+ year of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications 1+ year of experience following detailed work instructions, reading, and interpreting blueprints, drawings, or specifications Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel Ability to lift 35-40 pounds repeatedly throughout the shift Preferred Qualifications (Desired Skills/Experience): Demonstrates strong effective communication skills Strong work ethic and sense of urgency for completing assigned tasks/work Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift This position is for variable shift (shift 4). Variable shift means you will be assigned a shift at the time of hire based on business needs. You will remain on your assigned work shift until re-evaluation is required. Shifts assigned for training may differ from your permanent work shift. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $54,000 - $64,000 Applications for this position will be accepted until Aug. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Commercial Airplanes (BCA), 787 Interiors organization is seeking an Expert Cabin Systems Engineers to join our team in NorthCharleston, SC. At Boeing, we are dedicated to designing and integrating advanced electrical cabin systems to advance the future of our airplane interiors and passenger experience. Our projects focus on translating high-level concepts and requirements into the system design, ensuring the seamless physical integration of electrical systems and components within our aircraft. We collaborate with a global supplier network to implement cutting-edge system hardware and software, validating our designs through rigorous testing. Our engineers work on aircraft systems from initial concept through certification, delivery, and throughout their production lifecycle, continually pushing the boundaries of innovation in commercial air transport. This position will specifically involve working with Cabin Systems, which encompasses interior lighting, passenger address systems, in-flight entertainment, seatback video, passenger connectivity, satellite connections and more. Our teams are currently hiring for a broad range of experience levels including Experienced and Senior Electronic Systems Design and Analysis Engineers. Our team is currently hiring for an Expert (Level 5) Systems Engineer. Position Responsibilities: Develops and documents complex electronic and electrical system designs. Tests and validates to ensure system designs meet operational and functional requirements Assists in monitoring supplier performance to ensure system integration and compliance with requirements Solves problems concerning fielded hardware and software over the entire product lifecycle Researches specific technology advances for potential application to company business needs Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 14+ years of experience with Cabin Systems engineering or equivalent in a related field. Demonstrated design and system thinking skills Preferred Qualifications (Desired Skills/Experience): 20+ years of experience with Cabin Systems engineering or equivalent in a related field Experience working with suppliers Experience interfacing with E-UMs/the FAA and/or other certification regulatory agencies Exceptional organizational skills with attention to detail. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $164,900- $223,100 Applications for this position will be accepted until Jul. 16, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is seeking Experienced and Senior Flight Line Group Coordinators (Level C and Level D) to support the 787 Boeing South Carolina Delivery Center Operations in North Charleston, South Carolina on a variable shift! This position will provide critical production support to field operations including improving production efficiency, safety and optimizing product quality. The individual will be responsible for, but are not limited to, performing tasks in the following areas: pre-shift planning, crew meetings, team status updates, training, process improvement and Lean/BPS. Primary Responsibilities: Creates a culture that enhances productivity, safety and a teaming environment. Works cross-functionally to identify opportunities for improvement. Ensure LOTO book, kit and LOTO equipment are used correctly and inventoried. Coordinates with Lead/Manager on execution and critical path of production build. Supervising Lock Out Tag Out (LOTO). Review current LOTOs. Coordinating hazardous energy work. Hand-off or end-of-shift activities. Abnormal circumstance responses. Verifies Aircraft power can be safely provided to the airplane. Inventory LOTO Kits Pre and Post shift. Sign into all LOTOs. Remove any LOTOs from the book as required. The GC meets with the work team to evaluate where hazardous energy is to be introduced. Coordinating with Functional Test SMEs and ME's. Review status of personnel and airplane system configuration. Transfer LOTOs to the incoming GC's. Sign out of all open Control Log Sheets (X35681). Verifies all mechanics are signed out of active LOTOs. The GC may serve as PAE (Primary Authorized Employee) for all or some of the LOTOs only when necessary. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Employer will not sponsor applicants for employment visa status. Basic Qualifications (Required Skills/ Experience): Ability to work a variable shift. Ability to work overtime 3+ years of experience with live aircraft field operations/aircraft systems/LOTO 3+ years of experience within aerospace, fabrication or manufacturing 3+ years of experience in advising and influencing others to meet schedules and safety requirements or resolve technical or operational problems 3+ years of experience with Systematic Problem Solving Preferred Qualifications (Desired Skills/Experience): 5+ years related work experience or an equivalent combination of education and experience 3 years of experience with Boeing Production System (BPS) concepts 3 years of experience in a team environment Team Leadership (Formal/Informal) experience Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for a variable shift (shift 4). Variable shift means you will be placed on a shift at the time of hire based on business needs at that time. You will remain on that shift until re-evaluation is needed. Union: This is a non-union represented position. Employee Referral: Referral to this job is eligible for bonus Total Rewards At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range Level C: $61,200 - 64,500 Summary pay range Level D: $72,000 - 76,000 When Applying: Please review every aspect of your application carefully prior to submitting to ensure accuracy. If your formal education is in the field you are applying for please include that time in your total years of experience. Prior to uploading your resume, please ensure it is in one of the following formats: DOC, DOCX, PDF, or TXT. Use your most accurate contact information on your application to include your full address. Applications for this position will be accepted until Jul. 30, 2026 Export Control Requirements: This is not an Export Control position. Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 4) Structures Design Engineer for our Wing & Empennage Life Cycle Product Team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what's possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Develops, integrates and documents structural requirements to establish the wing and/or empennage design. Develops, maintains and modifies structural designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Leads performance, integration and analysis of tests to validate and verify the structural design meets requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Assists with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements. Active leader in the growth of a new organization performing lead level duties, mentorship, and training of developing team members. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with international partners/suppliers. Applies Part 21 and Part 25 Code of Federal Regulations knowledge and facilitates interactions with Federal Regulators Works under minimal direction. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 9+ years of related work experience or an equivalent combination of education and experience 5+ years of experience with aircraft structural design 3+ years of experience with design of composite structures Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 7+ years of experience working on wing or empennage primary structure such as Wing tips, wing leading or trailing edges, wing center section, wing box, wing join, vertical, or horizontal stabilizers 5+ years of experience performing the basic qualifications in a lead capacity working under minimal direction Experience designing and qualifying composite primary structures, including laminate design, ply-drop strategies, and structural strength considerations Hands on experience with fabrication of metallic and composite structures Current or prior DER/AR/E-UM Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay Summary Range: $129,600 - $158,400 Applications for this position will be accepted until Jul. 16, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is currently seeking Aircraft Assembly Mechanics (Level B or C) to support the 787-production system as an electrical, system, or seal/wing mechanic in North Charleston, South Carolina on a variable shift. This role offers an exciting opportunity within a dynamic manufacturing assembly environment. Team members will leverage their prior experience, along with the knowledge gained through foundational training and certifications, to complete daily assigned tasks safely and with quality. Individuals will be responsible for identifying parts and tooling within their work locations on advanced airplanes by interpreting technical drawings to accurately complete detailed work instructions. Attention to detail and strict compliance with procedures are critical to correctly identify all necessary hand tools, parts, and equipment required to ensure defect-free work. This position is physically demanding, and employment is contingent upon successful completion of foundational training requirements. This is not just a job-it's an opportunity to build a career while contributing to the future of aviation as part of an innovative team! Primary Responsibilities: Safety: Adhering strictly to all safety protocols and guidelines to protect ourselves, our colleagues, and our workplace. Safety is non-negotiable and must be integrated into every task we perform. Quality: Maintaining rigorous quality standards in all deliverables, ensuring that our work meets or exceeds expectations and complies with all regulatory and company requirements. Teamwork: Contribute to a collaborative environment, engaging with teammates and support teams to achieve our shared mission by working together; be willing to ask for help and give it freely. Proficiency in reading, writing, and speaking English. Must successfully complete the new hire foundational training to obtain and maintain all required certifications. Proficient use of a computer in a dynamic production environment. Look up/read/comprehend electronic technical work instructions, drawings and/or specifications. Wear appropriate protective clothing/equipment determined by the task performed. Operate various mechanical lifts (e.g. ladders, tiger and snorkel lifts). Use various hand tools and diagnostic equipment such as screwdrivers, ratchets, power screwdriver multi meters, continuity testers. Install various aircraft system components and wiring such as: tubing, valves, regulators, actuators, compressors, ducts, and interior components. Route wire harnesses to supports, install connectors to receptacles and electronic components. Fiber optic clean and inspection, light loss testing, routing and installation. Apply chemical solvents, sealants, coatings, primers, adhesives, paints and special finishes. Work in confined space and respirator usage. Inspect your work quality and check for Foreign Object Debris. Work around energized sources (electrical equipment and hazards/shock, e.g. circuit breakers and wiring) and exposure to constant noise. Finger manipulation (keyboarding, other). Lifting and carrying up to 10-35 pounds. Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), Crawling, Crouching (squatting). Flexion/Extension (head bent down, head bent back), Handling, Kneeling, Bending at the waist, Reaching (overhead), Rotation of head/neck, Standing, Twisting at the waist and walking. This position is expected to be 100% onsite. The selected candidate will be required to work onsite. This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete an assessment as part of the selection process. You will receive an email invitation at the address you provided in your application. From the date of the invitation, you will have 5 days to complete the assessment. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): Must have the ability to work variable shifts (first, second, or third) based on business needs. Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Must be able to lift/carry up to 35 pounds; push/pull using up to 45 pounds of force; and reach overhead up to six hours per day. Must be able to work with high-hazard chemicals using proper protective equipment provided. Must be able to complete and maintain Confined Space and Fall Protection certifications, if required. 1+ year experience using software applications such as internet navigation, email, Microsoft Office Suite, and/or other specialized computer applications. 1+ year experience following detailed work instructions, reading and interpreting blueprints, drawings, or specifications, along with successful completion of training and knowledge assessments involving mathematical calculations, all conducted in English. 1+ year experience in a manufacturing, technical, or mechanical field, including equivalent education or military experience, performing work with basic hand, power, and/or pneumatic (air) tools. Preferred Qualifications (Desired Skills/Experience): 3+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience in manufacturing, technical, or mechanical field, including equivalent education or military service. 3+ years of experience in aerospace installing various aircraft system components such as tubing, valves, regulators, actuators, compressors, ducts, and interior components. 3+ years of experience in Automotive/Diesel/Heavy equipment mechanical experience. 3+ years of experience with wire routing, dressing, hook-up/mating connections. 3+ years of experience applying sealant to required surfaces per specifications. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for a variable shift (shift 4). Variable shift means you will be assigned a shift at the time of hire based on business needs. You will remain on your assigned work shift until a re-evaluation is required. Shifts assigned for training may differ from your permanent work shift. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range level B: $54,000 - $64,000 Summary pay range level C: $61,200 - $64,500 When Applying: Please review every aspect of your application carefully prior to submitting to ensure accuracy. If your formal education is in the field you are applying for please include that time in your total years of experience. Prior to uploading your resume, please ensure it is in one of the following formats: DOC, DOCX, PDF, or TXT. Use your most accurate contact information on your application to include your full address. Applications for this position will be accepted until Sept. 28, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation . click apply for full job details

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is seeking a 2nd Shift787 Manufacturing Workplace Coach Manager (Level K) to support the 787 Airplane Program at the Airport Campus in North Charleston, South Carolina. We seek strong leadership, interpersonal and coaching skills to further enable our business units to embrace and advance our One BPS culture, tools, and key performance indicators. In Manufacturing, we embrace daily a First Pass Quality approach, and our leaders must be committed to the success of every team member. Position Responsibilities: Manage, develop, and motivate a team of Manufacturing Workplace Coaches (WPCs) across multiple manufacturing business units (MBUs) to serve and help mechanics - new and experienced - perform with confidence and effectiveness Own and execute a governance strategy for Structured On-Job Training (SOJT) across multiple MBUs Develop and maintain multiple Skill Enhancement Centers (SECs) that simulate the production system and provide a safe, risk-free environment for hands-on training through Guided Skills Practices (GSPs); SECs are expected to contain several Guided Skills Practices (GSPs) that are an identical replica of the airplane Ensure WPCs are driving meaningful improvements & tightly aligned to the business' highest priorities, including rate and flow enablers, top defect drivers, and baseline jobs Build and maintain strong partnerships across manufacturing and support organizations, especially Production Engineering, to keep the team focused on the most critical production system needs Communicate a clear vision for the organization and current status effectively to executive leadership Champion a safety and quality mindset while modeling Boeing Values and Behaviors Boeing First-Line Leader Assessment: To be considered for this position, you will be required to complete an assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): Candidates must have at least one (1) year of experience in a leadership role (team leader, temp manager, large scale cross functional project/program management, or formal manager experience) OR have completed the Boeing internal course 'Exploring Leadership' 3+ years of experience advising & influencing managers or non-managers to meet schedules or resolve technical/operational problems 3+ years of experience in aerospace manufacturing operations or support Preferred Qualifications (Desired Skills/Experience): 3+ years of experience in leadership development, coaching, and training for mechanics 3+ years of experience leading Boeing Problem Solving Model (or similar) and Root Cause Corrective Action (RCCA) activities 3+ years of leadership or management experience in a manufacturing / production environment 3+ years of experience in collaborative problem solving, building relationships & professional written and verbal communications Experience with 787 Airplane Program operations (or related experience) Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Shift: This is a 2nd shift position, but occasionally requires supporting WPC's on alternate shifts as needed. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Travel: Position may require up to 10% travel. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $111,350 - $150,650 Applications for this position will be accepted until Jul. 23, 2026 Export Control Requirements: This is not an Export Control position. Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is seeking a Mechanical Systems Design and Analysis Engineer (Experienced or Senior) to join our 787 Environmental Control Systems (ECS) Engineering team located in North Charleston, South Carolina. The Mechanical Systems Design and Analysis Engineer will support the development of one of the following sub-teams within Environmental Controls Systems (ECS): Cabin Air Conditioning, Liquid Cooling, Air Distribution, Cabin Pressure Control, Fire Protection and Smoke Detection, Ice and Rain Protection, Air Quality, and Electrical. This role will be primarily focused on component/systems equipment management, where daily tasks will be interfacing with a component supplier and various Boeing support groups. Other responsibilities are updating analysis models, tool sets, supporting changes to design, addressing obsolescence, developing product improvements, supporting production build and test, new customer introduction, and in-service fleet projects. The Mechanical Systems Design and Analysis Engineer candidate should have some experiences comparable to the following key skills: establish hand-calculations to spot-check computational analysis, develop test procedures and systems/components interface requirements. In addition, the candidate should have experience in clear communication skills for reporting progress to a wide audience, the ability to develop a set of project goals and objectives, developing a project schedule and on time execution. Furthermore, they should have technical knowledge in an area comparable to: system controls, mechanical systems, systems modeling, heat transfer, thermodynamics, fluid dynamics, and/or experience with model correlation from flight test data to analysis tools. Position Responsibilities: Experienced (Level 3) Supports Requirements Traceability & Development Assurance. Supports System Safety Analysis Documentation, including the creation of Fault Hazard Assessments (FHAs), Failure Modes and Effects Analysis (FMEAs), Fault Tree Analysis (FTAs). Supports the development, maintenance, or modification of system, component, and installation designs/proposals to provide design documentation to downstream groups. Modernizes analytical models into modern tool sets Support technical meetings and planning efforts, contributing technical information to wide range of audiences. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Integrates several federated ECS flow-analysis or heat transfer models into a singular tool-set. Supports system components' designs/proposals standards to provide installation and detail documentation. Contributes to supplier development, test, and production activities and directs the supplier to optimize integration and achieve program goals. Supports Lab, Flight Test, Factory, and Airplane Delivery Center Support. Supports the creation and maintenance of airplane support manuals such as Fault Isolation Manuals (FIM), and Component Maintenance Manuals (CMM) Trains others. Works under general direction. Senior (Level 4) Lead Requirements Traceability & Development Assurance. Lead System Safety Analysis Documentation, including the creation of Fault Hazard Assessments (FHAs), Failure Modes and Effects Analysis (FMEAs), Fault Tree Analysis (FTAs). Lead the development, maintenance, or modification of system components' designs/proposals to provide installation and detail documentation. Lead integration and modernization of analysis tools/modeling Lead technical meetings and planning efforts, presenting technical information to wide range of audiences. Reviews and finalizes documents analyses to validate and verify systems and components meet requirements and specifications. Support proposal preparation and new business development efforts. Manage supplier development, test, and production activities and directs the supplier to optimize integration and achieve program goals. Lead Lab, Flight Test, Factory, and Airplane Delivery Center Support Lead the creation and maintenance of airplane support manuals such as Fault Isolation Manuals (FIM), and Component Maintenance Manuals (CMM) Train and coach others. Work under minimal direction. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences). Level 3: 5 or more years' related work experience or an equivalent combination of education and experience. 3 or more years' of experience with Mechanical Systems. 3 or more years' of professional experience working in an engineering field. 3 or more years' of experience working with cross-functional teams. Ability to travel domestically and internationally 10%. Preferred Qualifications (Desired Skills/Experience): Level 4: 9 or more years' related work experience or an equivalent combination of education and experience. Level 3/4 - Experience mentoring and developing others. 5 or more years' of experience in aerospace related role. 5 or more years' of experience working in requirements validation and verification. 5 or more years' of experience with airplane certification. 5 or more years 'of experience reading and interpreting engineering drawings, procedures, and specifications. 5 or more years' of experience in environmental controls systems engineering roles. 5 or more years' of demonstrated project management skills. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Experienced (Level 3): $103,700 - $140,300 Senior (Level 4): $126,650 - $171,350 Additional Information: All information provided will be checked and may be verified. Applications for this position will be accepted until Jul. 15, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is hiring for Systems Integration Engineers (Mid-Level or Senior) to join our 787 Systems Integration Engineering team in North Charleston, South Carolina. The Systems Integration Engineer will work with a dynamic and diverse Systems Integration team that supports the design, configuration, production, certification, and delivery of 787s. The Systems integration team supports large-scale multisystem projects from concept, to integrated testing, certification, production incorporation, and delivery. The 787 program is undertaking a number of significant improvements including new features and capabilities to enhance this already highly capable airplane. Additionally, the Systems Integration team supports the entire 787 fleet in service, leading resolution to fleet and safety issues, customer commitments, and overall airplane system product strategy. This opportunity will provide the engineer with a detailed exposure of the core systems components at the heart of the 787, learning about systems interfaces, airplane level thinking, change management, and project management. Successful candidates will have a desire to work in a fast-paced environment, solve complex problems, present information to executive leadership, and build and execute integrated project plans. Our team is currently hiring for a broad range of experience levels including Mid-Level (Level 3) and Senior (Level 4) System Integration Engineers. Primary Responsibilities: Supports cross-functional teams through the development and integration of large-scale multi-system projects Work with multiple airplane systems including Environmental Controls Systems, Mechanical Hydraulics, Flight Controls, Electrical Sub-Systems, Electrical Design and Standards, Flight Deck, Cabin Systems, Network Systems, Avionics Systems, and Cyber Security and will lead these teams through a variety of complex projects Collaborate with airplane safety, regulatory administration, and various 787 program teams such as change management, supply chain, production engineering, manufacturing engineering, operations, and delivery centers Implements systems engineering best practices, and process improvements Working knowledge of the aircraft certification process Able to lead by influence outside formal reporting relationships Ability to effectively communicate with a diverse engineering team in order to synthesize complex information Strong project management skills Ability to communicate technical and project recommendations to executive management Ability to travel domestically and internationally Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry 2+ years of experience performing complex systems engineering or system integration work 2+ years of experience working with cross-functional teams Preferred Qualifications (Desired Skills/Experience): Level 4: 5+ years of related work experience or an equivalent combination of education and experience. 2+ years of experience in the Aerospace Industry Experience working with and collaborating with executive leadership Experience supporting production and factory Experience supporting airline customers Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level: $112,200 - $151,800 Senior Level: $136,850 - $185,150 Applications for this position will be accepted until Aug. 28, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking Composite Fabrication Specialists (Level B or C) to assist with multiple areas of the 787 production system in North Charleston, South Carolina on a variable shift. This role offers an exciting opportunity within a dynamic manufacturing assembly environment. Team members will leverage their prior experience, and the knowledge gained from training and certifications to complete daily assigned tasks effectively. Individuals will be responsible for identifying their work locations on advanced airplanes, parts, and tooling by interpreting intricate drawings to accurately complete detailed work instructions. Attention to detail and procedure compliance is critical to identify all necessary hand tools, parts, and equipment required to ensure defect-free work. This position is not just a job; it's an opportunity to build a career while contributing to the future of aviation as a part of an innovative team! Primary Responsibilities: Safety: Adhering strictly to all safety protocols and guidelines to protect ourselves, our colleagues, and our workplace. Safety is non-negotiable and must be integrated into every task we perform. Quality: Maintaining rigorous quality standards in all deliverables, ensuring that our work meets or exceeds expectations and complies with all regulatory and company requirements. Teamwork: Contribute to a collaborative environment, engaging with teammates and support teams to achieve our shared mission by working together; be willing to ask for help and give it freely. Proficiency in reading, writing, and speaking English. Must successfully complete the new hire foundational training to obtain and maintain all required certifications. Proficient use of a computer in a dynamic production environment. Look up/read/comprehend electronic technical work instructions, drawings and/or specifications. Wear appropriate protective clothing/equipment determined by the task performed. Operate various mechanical lifts (e.g. ladders, tiger and snorkel lifts). Use various hand tools and diagnostic equipment such as screwdrivers, ratchets, power screwdriver multi meters, continuity testers. Apply chemical solvents, sealants, coatings, primers, adhesives, paints and special finishes. Inspect your work quality and check for Foreign Object Debris. Work around energized sources (electrical equipment and hazards/shock, e.g. circuit breakers and wiring) and exposure to constant noise. Finger manipulation (keyboarding, other). Lifting and carrying up to 10-35 pounds. Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting). Flexion/Extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking. Experience with conventional material layup, precision measuring, power, pneumatic and hand tools Ability to obtain CNC Experience. This position is expected to be 100% onsite. The selected candidate will be required to work onsite. This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/ Experience): Must have the ability to work variable shifts (first, second, or third) based on business needs. Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Must be able to lift/carry up to 35 pounds; push/pull using up to 45 pounds of force; and reach overhead up to six hours per day. Must be able to work with high-hazard chemicals using proper protective equipment provided. Must be able to complete and maintain Confined Space and Fall Protection certifications, if required. 1+ year experience using software applications such as internet navigation, email, Microsoft Office Suite, and/or other specialized computer applications. 1+ year experience following detailed work instructions, reading and interpreting blueprints, drawings, or specifications, along with successful completion of training and knowledge assessments involving mathematical calculations, all conducted in English. 1+ year experience in a manufacturing, technical, or mechanical field, including equivalent education or military experience, performing work with basic hand, power, and/or pneumatic (air) tools. 1+ years of experience in manufacturing, fabrication, or assembly processes and procedures. Preferred Qualifications (Desired Skills/Experience): 3+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience in manufacturing, technical, or mechanical field, including equivalent education or military service. 3+ years of CNC experience. 3+ years of experience with conventional material layup, precision measuring, power, pneumatic and hand tools. 3+ years of crane operations experience. 3+ years of experience reading and interpreting drawings, specifications, material processes, schematic and diagrams in aviation. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for a variable shift (shift 4). Variable shift means you will be placed on a shift at the time of hire based on business needs at that time. You will remain on that shift until re-evaluation is needed. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range level B: $54,000 - $64,000 Summary pay range level C: $61,200 - $64,500 When Applying: Please review every aspect of your application carefully prior to submitting to ensure accuracy. If you have formal education or military experience in the field you are applying for please include that time in your total years of experience. Prior to uploading your resume, please ensure it is in one of the following formats: DOC, DOCX, PDF, or TXT. Use your most accurate contact information on your application to include your full address. Applications for this position will be accepted until Sept. 28, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking Aircraft Assembly Structures Mechanics (Level B or C) to join our 787 production teams working in North Charleston, South Carolina on a variable shift. This role offers an exciting opportunity within a dynamic manufacturing assembly environment. Team members will leverage their prior experience, and the knowledge gained from training and certifications to complete daily assigned tasks effectively. Individuals will be responsible for identifying their work locations on advanced airplanes, parts, and tooling by interpreting intricate drawings to accurately complete detailed work instructions. Attention to detail and procedure compliance is critical to identify all necessary hand tools, parts, and equipment required to ensure defect-free work. This position is not just a job; it's an opportunity to build a career while contributing to the future of aviation as a part of an innovative team! Primary Responsibilities: Safety: Adhering strictly to all safety protocols and guidelines to protect ourselves, our colleagues, and our workplace. Safety is non-negotiable and must be integrated into every task we perform. Quality: Maintaining rigorous quality standards in all deliverables, ensuring that our work meets or exceeds expectations and complies with all regulatory and company requirements. Teamwork: Contribute to a collaborative environment, engaging with teammates and support teams to achieve our shared mission by working together; be willing to ask for help and give it freely. Proficiency in reading, writing, and speaking English. Must successfully complete the new hire foundational training to obtain and maintain all required certifications. Proficient use of a computer in a dynamic production environment. Look up/read/comprehend electronic technical work instructions, drawings and/or specifications. Wear appropriate protective clothing/equipment determined by the task performed. Operate various mechanical lifts (e.g. ladders, tiger and snorkel lifts). Use various hand tools and diagnostic equipment such as screwdrivers, ratchets, power screwdriver multi meters, continuity testers. Apply chemical solvents, sealants, coatings, primers, adhesives, paints and special finishes. Inspect your work quality and check for Foreign Object Debris. Work around energized sources (electrical equipment and hazards/shock, e.g. circuit breakers and wiring) and exposure to constant noise. Finger manipulation (keyboarding, other). Lifting and carrying up to 10-35 pounds. Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting). Flexion/Extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking. This position is expected to be 100% onsite. The selected candidate will be required to work onsite. This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete an assessment as part of the selection process. You will receive an email invitation at the address you provided in your application. From the date of the invitation, you will have 5 days to complete the assessment. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): Must have the ability to work variable shifts (first, second, or third) based on business needs. Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Must be able to lift/carry up to 35 pounds; push/pull using up to 45 pounds of force; and reach overhead up to six hours per day. Must be able to work with high-hazard chemicals using proper protective equipment provided. Must be able to complete and maintain Confined Space and Fall Protection certifications, if required. 1+ year experience using software applications such as internet navigation, email, Microsoft Office Suite, and/or other specialized computer applications. 1+ year experience following detailed work instructions, reading and interpreting blueprints, drawings, or specifications, along with successful completion of training and knowledge assessments involving mathematical calculations, all conducted in English. 1+ year experience in a manufacturing, technical, or mechanical field, including equivalent education or military experience, performing work with basic hand, power, and/or pneumatic (air) tools. Preferred Qualifications (Desired Skills/Experience): 3+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience in manufacturing, technical, or mechanical field, including equivalent education or military service. 1+ years of composite experience. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for a variable shift (shift 4). Variable shift means you will be placed on a shift at the time of hire based on business needs at that time. You will remain on that shift until re-evaluation is needed. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for level B: $54,000 - $64,000 Summary pay range for level C: $61,200 - $64,500 When Applying: Please review every aspect of your application carefully prior to submitting to ensure accuracy. If you have formal education or military experience in the field you are applying for please include that time in your total years of experience. Prior to uploading your resume, please ensure it is in one of the following formats: DOC, DOCX, PDF, or TXT. Use your most accurate contact information on your application to include your full address. Applications for this position will be accepted until Sept. 28, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is currently seeking Associate Propulsion Assemblers (Level B) to join the Propulsion South Carolina team in North Charleston, South Carolina on Variable Shift. BCA is looking for teammates to perform engine buildup assembly. The teammate will be responsible for, but are not limited to, performing tasks in the following areas; locating parts and assemblies; gap verification & shimming; manual and automated drilling; sealant application; installation of fasteners, rivets, & blind bolts; training, process improvement and Lean/BPS. Position Responsibilities: Performs routine production assembly operations on structural parts, mechanical assemblies, sub-assemblies and equipment and accessories using manual or automated assembly tools. Models a culture of One Team, Pride and Ownership. Partners with Integrated Build Teams (IBTs) and Team Leader to mitigate performance risk utilizing Systematic Problem Solving (SPS) methodologies. Identifies roadblocks and production constraints escalating issues which cannot be resolved by the team using open and clear communication. Uses KPI and BPS principles to improve production flow and work environment. Supports overtime as required to meet customer commitments. Participates in Lean Manufacturing Systems (LMS) and 5S activities. Supports teammates to improve overall team performance by providing cross training and mentoring. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): Ability to work a variable shift (1st, 2nd, or 3rd) 1+ year of experience in aerospace, manufacturing, and/or fabrication 1+ years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications, in English. 1+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications. Preferred Qualifications (Desired Skills/Experience): Demonstrates strong effective communication skills Strong work ethic and sense of urgency for completing assigned tasks/work Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for Variable shift. Variable shift means you will be placed on a shift at the time of hire based on business needs at that time. You will remain on that shift until re-evaluation of the need. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $54,000 - 64,000 Applications for this position will be accepted until Jul. 27, 2026 Export Control Requirements: If the successful candidate is not a "U.S. Person" (as defined by 22 C.F.R. 120.62 "U.S. Person" includes U.S. citizens and U.S. nationals, lawful permanent residents, refugees, or asylees) and the position requires access to export-controlled data, an appropriate export authorization by the U.S. Government may be required prior to such access. Employment, and the continuity of employment of non-U.S. persons, is contingent upon the company's ability to secure and maintain the necessary export control authorization. Export Control Details: US based job, US Person not required Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking Structures and Payloads Design Engineers (Mid-Level or Senior) to join our Seats Integration Team in North Charleston, South Carolina. This role is focused on installation and delivery support, resolving emergent build issues, and ensuring seats are installed, certified, and delivered on schedule and to specification. You will be the technical point of contact during aircraft installation and delivery campaigns-working hands on with factory teams, suppliers, and airline customers to resolve in flightline and emergent build issues that impact schedule, safety, or compliance. Your work directly enables safe handovers of aircraft to customers and drives continuous improvement in installation processes and supplier deliverables. Primary Responsibilities: Provide day to day installation and delivery engineering support during build, outfitting, and final delivery activities Lead rapid technical troubleshooting and root cause resolution for emergent build issues related to seat installation, interfaces, and systems Coordinate immediate corrective actions with suppliers, production teams, IPTs, and ground operations to minimize schedule impact and ensure compliance Author and release engineering dispositions, field fixes, and installation procedures to support on wing and factory fixes Review and approve supplier technical data and installation packages to ensure readiness for factory implementation and delivery acceptance Support aircraft acceptance events with airline customers, validate installation quality, and close out delivery nonconformances Prepare and maintain compliance documentation and summary reports tied to delivery milestones and certification requirements Capture lessons learned from emergent issues and drive design or process changes to prevent recurrence Interface with regulatory authorities (including FAA) as needed for dispositioning issues affecting certification or delivery Support IPTs to align priorities, schedule tradeoffs, risk mitigation, and supplier corrective action plans Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 5+ years of experience in engineering, including design, integration, and/or certification or equivalent combination of additional education and relevant experience. Preferred Qualifications (Desired Skills/Experience): Level 4: 9+ years of experience in engineering, including design, integration, and/or certification or equivalent combination of additional education and relevant experience Hands on installation and delivery support for aircraft interiors or seat systems in a production or final assembly environment Rapid troubleshooting and resolution of emergent build or field issues Working directly with suppliers, airline customers, and production/factory teams Familiarity with regulatory compliance and certification implications of installation issues Experience authoring engineering dispositions, field fixes, or installation work instructions Willingness to travel domestically and internationally for supplier or customer support Ability to work under pressure, prioritize multiple delivery issues, and communicate concise technical status to leadership and customers Proficiency with 3 D CAD and common engineering documentation tools preferred Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range Mid-Level 3: $103,700 - $140,300 Summary Pay Range Senior Level 4: $126,650 - $171,350 Applications for this position will be accepted until Jul. 16, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking Aircraft Production Test Electrical + Test Heavy Assemblers (Level B or Level C) to assist with multiple areas of the 787 production system in North Charleston, South Carolina on a variable shift. This role offers an exciting opportunity within a dynamic manufacturing assembly environment. Team members will leverage their prior experience, and the knowledge gained from training and certifications to complete daily assigned tasks effectively. Individuals will be responsible for identifying their work locations on advanced airplanes, parts, and tooling by interpreting intricate drawings to accurately complete detailed work instructions. Attention to detail and procedure compliance is critical to identify all necessary hand tools, parts, and equipment required to ensure defect-free work. This position is not just a job; it's an opportunity to build a career while contributing to the future of aviation as a part of an innovative team! Primary Responsibilities: Safety: Adhering strictly to all safety protocols and guidelines to protect ourselves, our colleagues, and our workplace. Safety is non-negotiable and must be integrated into every task we perform. Quality: Maintaining rigorous quality standards in all deliverables, ensuring that our work meets or exceeds expectations and complies with all regulatory and company requirements. Teamwork: Contribute to a collaborative environment, engaging with teammates and support teams to achieve our shared mission by working together; be willing to ask for help and give it freely. Proficiency in reading, writing, and speaking English. Must successfully complete the new hire foundational training to obtain and maintain all required certifications. Proficient use of a computer in a dynamic production environment. Look up/read/comprehend electronic technical work instructions, drawings and/or specifications. Wear appropriate protective clothing/equipment determined by the task performed. Operate various mechanical lifts (e.g. ladders, tiger and snorkel lifts). Use various hand tools and diagnostic equipment such as screwdrivers, ratchets, power screwdriver multi meters, continuity testers. Apply chemical solvents, sealants, coatings, primers, adhesives, paints and special finishes. Inspect your work quality and check for Foreign Object Debris. Work around energized sources (electrical equipment and hazards/shock, e.g. circuit breakers and wiring) and exposure to constant noise. Finger manipulation (keyboarding, other). Lifting and carrying up to 10-35 pounds. Climbing/balancing (stairs, ladders, poles, scaffolding, inclined surfaces), crawling, crouching (squatting). Flexion/Extension (head bent down, head bent back), handling, kneeling, bending at the waist, reaching (overhead), rotation of head/neck, standing, twisting at the waist and walking. Perform functional testing of aircraft electrical systems and components as well as perform aircraft systems troubleshooting and fault repair. Assess and document test or analysis data to show compliance. Perform complex production assembly operations on structural parts, mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual or automated assembly tools. Identify roadblocks and production constraints escalating issues which cannot be resolved by the team using open and clear communication. Support teammates to improve overall team performance by providing cross training and mentoring. This position is expected to be 100% onsite. The selected candidate will be required to work onsite. This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete an assessment as part of the selection process. You will receive an email invitation at the address you provided in your application. From the date of the invitation, you will have 5 days to complete the assessment. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/ Experience): Must have the ability to work variable shifts (first, second, or third) based on business needs. Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Must be able to lift/carry up to 35 pounds; push/pull using up to 45 pounds of force; and reach overhead up to six hours per day. Must be able to work with high-hazard chemicals using proper protective equipment provided. Must be able to complete and maintain Confined Space and Fall Protection certifications, if required. 1+ year experience using software applications such as internet navigation, email, Microsoft Office Suite, and/or other specialized computer applications. 1+ year experience following detailed work instructions, reading and interpreting blueprints, drawings, or specifications, along with successful completion of training and knowledge assessments involving mathematical calculations, all conducted in English. 1+ year experience in a manufacturing, technical, or mechanical field, including equivalent education or military experience, performing work with basic hand, power, and/or pneumatic (air) tools. 1+ years of experience in electrical assembly and/or electronic materials. 1+ years of experience in avionics systems troubleshooting, wire bundle installations, and aircraft electrical systems troubleshooting. Preferred Qualifications (Desired Skills/Experience): 3+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience in manufacturing, technical, or mechanical field, including equivalent education or military service. 3+ years of experience with functional testing of aircraft electrical systems. 3+ years of experience with functional testing of IFE systems knowledge. 3+ years of experience with aircraft systems troubleshooting and fault repair experience. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for a variable shift (shift 4). Variable shift means you will be placed on a shift at the time of hire based on business needs at that time. You will remain on that shift until re-evaluation is needed. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range level B: $54,000 - $64,000 Summary pay range level C: $61,200 - $64,500 When Applying: Please review every aspect of your application carefully prior to submitting to ensure accuracy. If you have formal education or military experience in the field you are applying for please include that time in your total years of experience. Prior to uploading your resume, please ensure it is in one of the following formats: DOC, DOCX, PDF, or TXT. Use your most accurate contact information on your application to include your full address. Applications for this position will be accepted until Sept. 28, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer . click apply for full job details