POSITION: QC Lab Tech (12-hr Shifts) SHIFTS: 12-hr Days (6am to 6pm) and 12-hr Nights (6pm to 6am) on a 2-2-3 pattern COMPENSATION: $21.50 (days) and $24.73 (nights) EDUCATION / PRIOR EXPERIENCE: High School Diploma or equivalent required Previous experience as a Laboratory Technician within a fast-paced manufacturing setting is preferred Demonstrated knowledge and ability to pass required Laboratory Technician Level I vials certification Exposure to ISO 9001 and 14001; along with cGMP, is a plus Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic understanding of computer-related tasks (e.g., SPC) is required Ability and willingness to work 8-hr Shifts within a 5-day pattern Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization SUMMARY / OBJECTIVE: Responsible for assuring that quality testing, along with release of the product, adheres with established standards and specifications. Where applicable, assist with general quality support, potential improvements measures and cross-training initiatives. Potential duties/responsibilities include (but not limited to): Collect samples and perform daily Hydrolytic Resistance Testing/Retesting of vials according to ISO 4802-1, using a titrator Communicate nonconforming issues and interact effectively with all employees at all levels of responsibility Perform inspections/testing of incoming materials using statistical sampling techniques and precision measuring instruments to ensure conformance to specifications Perform inventory and where/when applicable, order necessary lab supplies Maintain all calibrations and upkeep on lab and treatment room equipment Maintain, clean and fill all treatment tanks Write and/or review Standard Operating Procedures (SOPs), test methods, and lab testing summary reports Possess familiarity with Flame Atomic Absorption Spectrophotometer Remain flexible to work irregular hours to provide coverage during instances of staffing gaps, such as vacations and/or leaves of absence Complete daily cleaning of applicable laboratory station(s) Participate in required trainings and meetings, when necessary Follow all Company policies and procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Assist and follow all applicable ISO, cGMP and FDA guidelines
02/25/2022
Full time
POSITION: QC Lab Tech (12-hr Shifts) SHIFTS: 12-hr Days (6am to 6pm) and 12-hr Nights (6pm to 6am) on a 2-2-3 pattern COMPENSATION: $21.50 (days) and $24.73 (nights) EDUCATION / PRIOR EXPERIENCE: High School Diploma or equivalent required Previous experience as a Laboratory Technician within a fast-paced manufacturing setting is preferred Demonstrated knowledge and ability to pass required Laboratory Technician Level I vials certification Exposure to ISO 9001 and 14001; along with cGMP, is a plus Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic understanding of computer-related tasks (e.g., SPC) is required Ability and willingness to work 8-hr Shifts within a 5-day pattern Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization SUMMARY / OBJECTIVE: Responsible for assuring that quality testing, along with release of the product, adheres with established standards and specifications. Where applicable, assist with general quality support, potential improvements measures and cross-training initiatives. Potential duties/responsibilities include (but not limited to): Collect samples and perform daily Hydrolytic Resistance Testing/Retesting of vials according to ISO 4802-1, using a titrator Communicate nonconforming issues and interact effectively with all employees at all levels of responsibility Perform inspections/testing of incoming materials using statistical sampling techniques and precision measuring instruments to ensure conformance to specifications Perform inventory and where/when applicable, order necessary lab supplies Maintain all calibrations and upkeep on lab and treatment room equipment Maintain, clean and fill all treatment tanks Write and/or review Standard Operating Procedures (SOPs), test methods, and lab testing summary reports Possess familiarity with Flame Atomic Absorption Spectrophotometer Remain flexible to work irregular hours to provide coverage during instances of staffing gaps, such as vacations and/or leaves of absence Complete daily cleaning of applicable laboratory station(s) Participate in required trainings and meetings, when necessary Follow all Company policies and procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Assist and follow all applicable ISO, cGMP and FDA guidelines
POSITION: QC Lab Tech (12-hr Shifts) SHIFTS: 12-hr Days (6am to 6pm) and 12-hr Nights (6pm to 6am) on a 2-2-3 pattern COMPENSATION: $21.50 (days) and $24.73 (nights) EDUCATION / PRIOR EXPERIENCE: High School Diploma or equivalent required Previous experience as a Laboratory Technician within a fast-paced manufacturing setting is preferred Demonstrated knowledge and ability to pass required Laboratory Technician Level I vials certification Exposure to ISO 9001 and 14001; along with cGMP, is a plus Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic understanding of computer-related tasks (e.g., SPC) is required Ability and willingness to work 8-hr Shifts within a 5-day pattern Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization SUMMARY / OBJECTIVE: Responsible for assuring that quality testing, along with release of the product, adheres with established standards and specifications. Where applicable, assist with general quality support, potential improvements measures and cross-training initiatives. Potential duties/responsibilities include (but not limited to): Collect samples and perform daily Hydrolytic Resistance Testing/Retesting of vials according to ISO 4802-1, using a titrator Communicate nonconforming issues and interact effectively with all employees at all levels of responsibility Perform inspections/testing of incoming materials using statistical sampling techniques and precision measuring instruments to ensure conformance to specifications Perform inventory and where/when applicable, order necessary lab supplies Maintain all calibrations and upkeep on lab and treatment room equipment Maintain, clean and fill all treatment tanks Write and/or review Standard Operating Procedures (SOPs), test methods, and lab testing summary reports Possess familiarity with Flame Atomic Absorption Spectrophotometer Remain flexible to work irregular hours to provide coverage during instances of staffing gaps, such as vacations and/or leaves of absence Complete daily cleaning of applicable laboratory station(s) Participate in required trainings and meetings, when necessary Follow all Company policies and procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Assist and follow all applicable ISO, cGMP and FDA guidelines
02/25/2022
Full time
POSITION: QC Lab Tech (12-hr Shifts) SHIFTS: 12-hr Days (6am to 6pm) and 12-hr Nights (6pm to 6am) on a 2-2-3 pattern COMPENSATION: $21.50 (days) and $24.73 (nights) EDUCATION / PRIOR EXPERIENCE: High School Diploma or equivalent required Previous experience as a Laboratory Technician within a fast-paced manufacturing setting is preferred Demonstrated knowledge and ability to pass required Laboratory Technician Level I vials certification Exposure to ISO 9001 and 14001; along with cGMP, is a plus Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic understanding of computer-related tasks (e.g., SPC) is required Ability and willingness to work 8-hr Shifts within a 5-day pattern Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization SUMMARY / OBJECTIVE: Responsible for assuring that quality testing, along with release of the product, adheres with established standards and specifications. Where applicable, assist with general quality support, potential improvements measures and cross-training initiatives. Potential duties/responsibilities include (but not limited to): Collect samples and perform daily Hydrolytic Resistance Testing/Retesting of vials according to ISO 4802-1, using a titrator Communicate nonconforming issues and interact effectively with all employees at all levels of responsibility Perform inspections/testing of incoming materials using statistical sampling techniques and precision measuring instruments to ensure conformance to specifications Perform inventory and where/when applicable, order necessary lab supplies Maintain all calibrations and upkeep on lab and treatment room equipment Maintain, clean and fill all treatment tanks Write and/or review Standard Operating Procedures (SOPs), test methods, and lab testing summary reports Possess familiarity with Flame Atomic Absorption Spectrophotometer Remain flexible to work irregular hours to provide coverage during instances of staffing gaps, such as vacations and/or leaves of absence Complete daily cleaning of applicable laboratory station(s) Participate in required trainings and meetings, when necessary Follow all Company policies and procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Assist and follow all applicable ISO, cGMP and FDA guidelines
POSITION: QC Lab Tech (12-hr Shifts) SHIFTS: 12-hr Days (6am to 6pm) and 12-hr Nights (6pm to 6am) on a 2-2-3 pattern COMPENSATION: $21.50 (days) and $24.73 (nights) EDUCATION / PRIOR EXPERIENCE: High School Diploma or equivalent required Previous experience as a Laboratory Technician within a fast-paced manufacturing setting is preferred Demonstrated knowledge and ability to pass required Laboratory Technician Level I vials certification Exposure to ISO 9001 and 14001; along with cGMP, is a plus Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic understanding of computer-related tasks (e.g., SPC) is required Ability and willingness to work 8-hr Shifts within a 5-day pattern Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization SUMMARY / OBJECTIVE: Responsible for assuring that quality testing, along with release of the product, adheres with established standards and specifications. Where applicable, assist with general quality support, potential improvements measures and cross-training initiatives. Potential duties/responsibilities include (but not limited to): Collect samples and perform daily Hydrolytic Resistance Testing/Retesting of vials according to ISO 4802-1, using a titrator Communicate nonconforming issues and interact effectively with all employees at all levels of responsibility Perform inspections/testing of incoming materials using statistical sampling techniques and precision measuring instruments to ensure conformance to specifications Perform inventory and where/when applicable, order necessary lab supplies Maintain all calibrations and upkeep on lab and treatment room equipment Maintain, clean and fill all treatment tanks Write and/or review Standard Operating Procedures (SOPs), test methods, and lab testing summary reports Possess familiarity with Flame Atomic Absorption Spectrophotometer Remain flexible to work irregular hours to provide coverage during instances of staffing gaps, such as vacations and/or leaves of absence Complete daily cleaning of applicable laboratory station(s) Participate in required trainings and meetings, when necessary Follow all Company policies and procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Assist and follow all applicable ISO, cGMP and FDA guidelines
02/25/2022
Full time
POSITION: QC Lab Tech (12-hr Shifts) SHIFTS: 12-hr Days (6am to 6pm) and 12-hr Nights (6pm to 6am) on a 2-2-3 pattern COMPENSATION: $21.50 (days) and $24.73 (nights) EDUCATION / PRIOR EXPERIENCE: High School Diploma or equivalent required Previous experience as a Laboratory Technician within a fast-paced manufacturing setting is preferred Demonstrated knowledge and ability to pass required Laboratory Technician Level I vials certification Exposure to ISO 9001 and 14001; along with cGMP, is a plus Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic understanding of computer-related tasks (e.g., SPC) is required Ability and willingness to work 8-hr Shifts within a 5-day pattern Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization SUMMARY / OBJECTIVE: Responsible for assuring that quality testing, along with release of the product, adheres with established standards and specifications. Where applicable, assist with general quality support, potential improvements measures and cross-training initiatives. Potential duties/responsibilities include (but not limited to): Collect samples and perform daily Hydrolytic Resistance Testing/Retesting of vials according to ISO 4802-1, using a titrator Communicate nonconforming issues and interact effectively with all employees at all levels of responsibility Perform inspections/testing of incoming materials using statistical sampling techniques and precision measuring instruments to ensure conformance to specifications Perform inventory and where/when applicable, order necessary lab supplies Maintain all calibrations and upkeep on lab and treatment room equipment Maintain, clean and fill all treatment tanks Write and/or review Standard Operating Procedures (SOPs), test methods, and lab testing summary reports Possess familiarity with Flame Atomic Absorption Spectrophotometer Remain flexible to work irregular hours to provide coverage during instances of staffing gaps, such as vacations and/or leaves of absence Complete daily cleaning of applicable laboratory station(s) Participate in required trainings and meetings, when necessary Follow all Company policies and procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Assist and follow all applicable ISO, cGMP and FDA guidelines
POSITION: QC Lab Tech (12-hr Shifts) SHIFTS: 12-hr Days (6am to 6pm) and 12-hr Nights (6pm to 6am) on a 2-2-3 pattern COMPENSATION: $21.50 (days) and $24.73 (nights) EDUCATION / PRIOR EXPERIENCE: High School Diploma or equivalent required Previous experience as a Laboratory Technician within a fast-paced manufacturing setting is preferred Demonstrated knowledge and ability to pass required Laboratory Technician Level I vials certification Exposure to ISO 9001 and 14001; along with cGMP, is a plus Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic understanding of computer-related tasks (e.g., SPC) is required Ability and willingness to work 8-hr Shifts within a 5-day pattern Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization SUMMARY / OBJECTIVE: Responsible for assuring that quality testing, along with release of the product, adheres with established standards and specifications. Where applicable, assist with general quality support, potential improvements measures and cross-training initiatives. Potential duties/responsibilities include (but not limited to): Collect samples and perform daily Hydrolytic Resistance Testing/Retesting of vials according to ISO 4802-1, using a titrator Communicate nonconforming issues and interact effectively with all employees at all levels of responsibility Perform inspections/testing of incoming materials using statistical sampling techniques and precision measuring instruments to ensure conformance to specifications Perform inventory and where/when applicable, order necessary lab supplies Maintain all calibrations and upkeep on lab and treatment room equipment Maintain, clean and fill all treatment tanks Write and/or review Standard Operating Procedures (SOPs), test methods, and lab testing summary reports Possess familiarity with Flame Atomic Absorption Spectrophotometer Remain flexible to work irregular hours to provide coverage during instances of staffing gaps, such as vacations and/or leaves of absence Complete daily cleaning of applicable laboratory station(s) Participate in required trainings and meetings, when necessary Follow all Company policies and procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Assist and follow all applicable ISO, cGMP and FDA guidelines
02/25/2022
Full time
POSITION: QC Lab Tech (12-hr Shifts) SHIFTS: 12-hr Days (6am to 6pm) and 12-hr Nights (6pm to 6am) on a 2-2-3 pattern COMPENSATION: $21.50 (days) and $24.73 (nights) EDUCATION / PRIOR EXPERIENCE: High School Diploma or equivalent required Previous experience as a Laboratory Technician within a fast-paced manufacturing setting is preferred Demonstrated knowledge and ability to pass required Laboratory Technician Level I vials certification Exposure to ISO 9001 and 14001; along with cGMP, is a plus Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic understanding of computer-related tasks (e.g., SPC) is required Ability and willingness to work 8-hr Shifts within a 5-day pattern Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization SUMMARY / OBJECTIVE: Responsible for assuring that quality testing, along with release of the product, adheres with established standards and specifications. Where applicable, assist with general quality support, potential improvements measures and cross-training initiatives. Potential duties/responsibilities include (but not limited to): Collect samples and perform daily Hydrolytic Resistance Testing/Retesting of vials according to ISO 4802-1, using a titrator Communicate nonconforming issues and interact effectively with all employees at all levels of responsibility Perform inspections/testing of incoming materials using statistical sampling techniques and precision measuring instruments to ensure conformance to specifications Perform inventory and where/when applicable, order necessary lab supplies Maintain all calibrations and upkeep on lab and treatment room equipment Maintain, clean and fill all treatment tanks Write and/or review Standard Operating Procedures (SOPs), test methods, and lab testing summary reports Possess familiarity with Flame Atomic Absorption Spectrophotometer Remain flexible to work irregular hours to provide coverage during instances of staffing gaps, such as vacations and/or leaves of absence Complete daily cleaning of applicable laboratory station(s) Participate in required trainings and meetings, when necessary Follow all Company policies and procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Assist and follow all applicable ISO, cGMP and FDA guidelines
Process Technician IMM Process Tech is responsible for optimization of the production processes and implementing sustainable corrective measures for process discrepancies while producing high quality injection molded parts at a rate as set forth by company standards and customer specifications in a safe manner. Job Requirements: Support existing injection molding manufacturing Improve existing injection molding lines in NA Determine the proper injection molding processes Keeping all plastic injection molding machines producing quality product Manage improvement projects in injection molding area Monitor all processes related to injection molding Set up injection molding and assembly processes Maintain injection molding processes, tooling and equipment Experienced in scientific molding parameters and molding processes Provide support for a three-shift plastic injection molding operation Identify process variables with injection molding and associated equipment Develop and maintain best possible injection molding process parameters Purchased part injection molding issues, in emergency situations Leading process R&D developments for injection molding Provide technical/production support for injection molding and assembly areas Enabling and expanding injection molding manufacturing capabilities of assigned injection molding processes/profiles to produce customer product at a high level of quality Provide technical assistance in the area of injection molding (molding materials, mold design, molded part design, molding processes) Develop, evaluate and improve manufacturing methods Providing molding engineering direction and develop new technology for molding Providing molding engineering direction and developing new technology for the injection molding department
01/28/2021
Full time
Process Technician IMM Process Tech is responsible for optimization of the production processes and implementing sustainable corrective measures for process discrepancies while producing high quality injection molded parts at a rate as set forth by company standards and customer specifications in a safe manner. Job Requirements: Support existing injection molding manufacturing Improve existing injection molding lines in NA Determine the proper injection molding processes Keeping all plastic injection molding machines producing quality product Manage improvement projects in injection molding area Monitor all processes related to injection molding Set up injection molding and assembly processes Maintain injection molding processes, tooling and equipment Experienced in scientific molding parameters and molding processes Provide support for a three-shift plastic injection molding operation Identify process variables with injection molding and associated equipment Develop and maintain best possible injection molding process parameters Purchased part injection molding issues, in emergency situations Leading process R&D developments for injection molding Provide technical/production support for injection molding and assembly areas Enabling and expanding injection molding manufacturing capabilities of assigned injection molding processes/profiles to produce customer product at a high level of quality Provide technical assistance in the area of injection molding (molding materials, mold design, molded part design, molding processes) Develop, evaluate and improve manufacturing methods Providing molding engineering direction and develop new technology for molding Providing molding engineering direction and developing new technology for the injection molding department
SHIFT: 3rd Shift (10pm - 630am) in a 5-day pattern (Sunday Night to Friday Morning) WAGE: $21 to $24 per hour plus 15% night shift differential SUMMARY / RESPONSIBILITIES : This Electro-Mechanical Tech will be responsible/required (but not limited) to… Assist in planning, designing, fabricating and installing wiring and control systems (PLC and VFD) Tackle bench-work activities to include, reprogramming, rebuilds, wiring, operational checks and upgrades Work in conjunction with Maintenance to repair mechanical, pneumatic, hydraulic systems, electrical/electronic systems Perform work by referencing and adhering to technical manuals, electrical schematics and wiring diagrams, shop drawings, data sheets, wiring drawings and other documented specifications Ensure equipment meets regulatory requirements Interface with Production (Operators and Shift Manager) and other Maintenance contacts to communicate on machine efficiency and effectiveness, and/or regarding foreseeable issues Monitor and perform seasonal electro-mechanical activities on equipment during non-standard work hours Demonstrate flexibility in covering other shifts during instances of employee vacations or call-offs with the department Participate in required trainings and meetings; also where/when applicable- help guide new hires Follow all Company policies and procedures and applicable Standard Operating Procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Job Requirements: ATTRACTIVE SKILLS/EXPERIENCES : High School Diploma or equivalent (required) Two-year degree or certification in electric and electronic design, PLC programming and system design (highly preferred) Previous experience (2+ years) of electro-mechanical work in an industrial setting Demonstrated knowledge and ability to troubleshoot/repair electrical circuits, mechanical systems and pneumatics Exposure to a fast-paced manufacturing setting and cGMP (highly preferred) Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic PC skills/functionality Ability and willingness to work Mon-Fri on 3rd Shift (10am - 630am) w/ flexibility (e.g., OT, Weekends, On-Call) Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization
01/28/2021
Full time
SHIFT: 3rd Shift (10pm - 630am) in a 5-day pattern (Sunday Night to Friday Morning) WAGE: $21 to $24 per hour plus 15% night shift differential SUMMARY / RESPONSIBILITIES : This Electro-Mechanical Tech will be responsible/required (but not limited) to… Assist in planning, designing, fabricating and installing wiring and control systems (PLC and VFD) Tackle bench-work activities to include, reprogramming, rebuilds, wiring, operational checks and upgrades Work in conjunction with Maintenance to repair mechanical, pneumatic, hydraulic systems, electrical/electronic systems Perform work by referencing and adhering to technical manuals, electrical schematics and wiring diagrams, shop drawings, data sheets, wiring drawings and other documented specifications Ensure equipment meets regulatory requirements Interface with Production (Operators and Shift Manager) and other Maintenance contacts to communicate on machine efficiency and effectiveness, and/or regarding foreseeable issues Monitor and perform seasonal electro-mechanical activities on equipment during non-standard work hours Demonstrate flexibility in covering other shifts during instances of employee vacations or call-offs with the department Participate in required trainings and meetings; also where/when applicable- help guide new hires Follow all Company policies and procedures and applicable Standard Operating Procedures Help implement and/or suggest new concepts of IMSU/EHS in area of responsibility, while adhering to all safety policies and regulations, along with the EHS Guideline Job Requirements: ATTRACTIVE SKILLS/EXPERIENCES : High School Diploma or equivalent (required) Two-year degree or certification in electric and electronic design, PLC programming and system design (highly preferred) Previous experience (2+ years) of electro-mechanical work in an industrial setting Demonstrated knowledge and ability to troubleshoot/repair electrical circuits, mechanical systems and pneumatics Exposure to a fast-paced manufacturing setting and cGMP (highly preferred) Experience in glass forming industry and/or pharmaceutical industry experience (preferred) Demonstrated communication skills (written / oral) including the ability to read/speak English Basic PC skills/functionality Ability and willingness to work Mon-Fri on 3rd Shift (10am - 630am) w/ flexibility (e.g., OT, Weekends, On-Call) Ability and willingness to work in a production floor setting with moderate noise Ability and willingness to work in fast-paced, matrix structured organization
Responsible for the installation, process development, and validation of new and existing tooling and secondary operations. Responsible for coordination with customer for quoting of tooling, tooling repairs, engineering changes and samples. Assist in specifying new equipment needs for new extrusion projects. Work with Engineering/ Business Unit Ex/Ph on new projects under consideration of plant interests. Responsibility for strict observance of legal rules and regulations referring to work safety and adherence of working time. Analyze internal manufacturing performance metrics to identify and resolve manufacturing and business process problems. Job Requirements: B.S. Electrical Engineering, B.S. Mechanical Engineering, B.S. Manufacturing Engineering, B.S. Industrial Engineering, or equivalent and/or 5-10 years of experience in a similar position. Relevant experience may substitute for the degree requirement on a year-for year basis. Minimum of 3-5 years of experience as an Engineer in a Medical Extrusion environment required. •Assist tooling department in repairs, modifications, and troubleshooting tool issues •Troubleshoot production issues that cannot be resolved by production personnel Work with Staff, Operations manager or other departments on LEAN activities to improve processes/ reduce costs •Controlling of Extrusion Processes, taking actions in the event of quality or performance problems or failures if not solvable via Shift Supervisor or other Operations Staff •Responsibility of Plant Trials •Responsible for order and cleanliness in the production •Analyze internal manufacturing performance metrics to identify and resolve manufacturing and business process problems •Ability to train others on the Extrusion process •Authorized to give instructions and directions to Process Technicians, Shift Supervisors and Machine operators in a professional and technical manner •Additional duties as required or assigned
01/26/2021
Full time
Responsible for the installation, process development, and validation of new and existing tooling and secondary operations. Responsible for coordination with customer for quoting of tooling, tooling repairs, engineering changes and samples. Assist in specifying new equipment needs for new extrusion projects. Work with Engineering/ Business Unit Ex/Ph on new projects under consideration of plant interests. Responsibility for strict observance of legal rules and regulations referring to work safety and adherence of working time. Analyze internal manufacturing performance metrics to identify and resolve manufacturing and business process problems. Job Requirements: B.S. Electrical Engineering, B.S. Mechanical Engineering, B.S. Manufacturing Engineering, B.S. Industrial Engineering, or equivalent and/or 5-10 years of experience in a similar position. Relevant experience may substitute for the degree requirement on a year-for year basis. Minimum of 3-5 years of experience as an Engineer in a Medical Extrusion environment required. •Assist tooling department in repairs, modifications, and troubleshooting tool issues •Troubleshoot production issues that cannot be resolved by production personnel Work with Staff, Operations manager or other departments on LEAN activities to improve processes/ reduce costs •Controlling of Extrusion Processes, taking actions in the event of quality or performance problems or failures if not solvable via Shift Supervisor or other Operations Staff •Responsibility of Plant Trials •Responsible for order and cleanliness in the production •Analyze internal manufacturing performance metrics to identify and resolve manufacturing and business process problems •Ability to train others on the Extrusion process •Authorized to give instructions and directions to Process Technicians, Shift Supervisors and Machine operators in a professional and technical manner •Additional duties as required or assigned
