106 jobs found

National Radio Astronomy Observatory Title: Track Equipment Operator I-II (90) Location: NRAO Very Large Array, Magdalena, New Mexico, United States of America Requisition Number: 90 Job Family: Track Equipment Operator Pay Type: Hourly Required Education: CRA Position Description: Position Summary The National Radio Astronomy Observatory (NRAO) is an exciting and prestigious research facility that plays a vital role in the study of the universe. The Observatory operates a variety of radio telescopes that span the globe, including the famous Very Large Array (VLA) in New Mexico, the Green Bank Telescope in West Virginia, and the Atacama Large Millimeter/submillimeter Array (ALMA) in Chile. These telescopes are among the most advanced in the world, allowing astronomers to explore the universe in unprecedented detail. The NRAO is recruiting a full-time Track Equipment Operator I-II for our team in New Mexico. Under specific guidelines and directions from the group supervisor or lead operator, performs a variety of tasks involving construction, loading, lifting, installation and maintenance of track system and regularly assists in the maintenance and repair of heavy equipment involving work related to the over 40 miles of double tracks and standard gauge used to reconfigure the antennas. This is a "Safety Sensitive" position as noted in the Position Requirements Section. The position is based at the VLA radio telescope site, 50 miles west of Socorro, NM. Socorro is a small, historical town in the Rio Grande Valley, 75 miles south of Albuquerque. What You Will be Doing: General duties of Track Equipment Operator I include repairing and rebuilding railroad track using hand tools and power tools. Examples of the duties include, but are not limited to: Performing track maintenance, track repairs and installations consisting of driving spikes into ties with spike maul; pulling spikes with claw bar; installing and removing rail anchors; sliding, placing, and aligning tie plates under rail; cutting rails with rail saw, and lifting rails with manual track jacks. Removing and replacing ties, pulling and driving spikes, shoveling rock ballast, loading and unloading equipment and materials; May be required to operate heavy equipment such as a dump truck and tractor trailer; Assisting in making track inspections such as visual inspections for broken rail, defective switches and signals, track obstructions or weather related problems such as track washouts; Handling and moving track material and equipment; Loading/unloading equipment weighing up to 50 pounds (chop saw, air tools, hydraulic tool, hand tampers); with assistance, remove and install rail using rail tongs; with assistance, remove ties and slide new ties into place using tie tongs; with assistance, move debris away from work site (spike cans, anchors); Performing track bed maintenance which involves removing and replacing ballast; tamping ballast; unloading or assisting in unloading ballast from trucks or ballast cars; Operating the following track specific equipment safely and effectively: hydraulic spike puller; air or hydraulic wrenches to loosen or tighten track bolts; rail drill; portable abrasive rail saw to cut rail; Assisting with repair and maintenance of track equipment and other related machinery or vehicles; perform preventative maintenance on equipment, as directed; may be required to transport equipment locally; Use survey equipment including levels and theodolites to measure rail and intersection levels. Possession and maintenance of appropriate certification and license is required. Occasional local and domestic travel may be required. May be required to transport equipment to other NRAO sites. Proactive compliance with NRAO and government safety policies and procedures in own work areas. Other related duties as assigned Work Environment: The Track Equipment Operator works as part of a team and must be physically able to work inside or outside in all weather conditions, near moving mechanical parts and around heavy machinery and electrical equipment. Must be able to carry equipment and tools, and operate a variety of tools and equipment. Able to lift and/or move up to 50 pounds, unassisted, and work in high noise areas with personal protective equipment (PPE). Who You Are: You have a High school diploma or equivalent You have at least Two years related experience; equivalent combination of education and experience will be considered. While not required, You may have two years of experience maintaining and operating specialized production railway maintenance equipment. Demonstrated broad knowledge in the operation of railway maintenance equipment. As well as experience with arc and MIG welding Competency Summary Experience should demonstrate effective decision-making ability. Must be able to effectively communicate orally and/or using sketches or drawings. PC experience includes e-mail, word processing and data entry. Additional Requirements Must have (or obtain within twelve months of employment or transfer) and maintain a Commercial Driver's License (minimum of a Class B; Class A preferred). Safety Sensitive The selected candidate must successfully pass a post-offer, pre-employment/pre-placement drug screen. Failure to pass the Screen will disqualify the candidate from employment consideration for a period of six months from the date of the results. Total Rewards: The NRAO offers a comprehensive total rewards package for this position, subject to eligibility requirements. We are committed to serving our employees and their families with an extensive and competitive compensation and benefits package that supports our employees' overall well-being and career growth. Compensation The NRAO strives to attract and retain dedicated, highly qualified, competent, and motivated employees by offering competitive compensation and recognition for performance. Factors which may affect starting pay may include; education, experience, skills, competencies, other qualifications of the successful candidate, as well as internal equity and labor market conditions. Benefits: NRAO's benefits package addresses the needs of employees and their families with most benefits beginning on the first day of employment. NRAO provides excellent paid time off (13 holidays, annual accrual of up to 24 vacation days and 15 sick days, additional time off for doctor/dentist visits, and 8 weeks of paid parental leave). Medical, dental and vision plans are effective on the first day of employment. NRAO's retirement benefit contributes an amount equal to 10 percent of a qualified participant's base pay with no required employee contribution; we also offer an optional supplemental, tax-deferred plan for employee retirement contributions. Application Instructions: Select the "Apply" button. Please be prepared to upload your current CV/Resume and a cover letter describing interest and suitability for the position Equal Opportunity Employer Statement: AUI is an equal opportunity employer. To view our complete statement, please visit . If you require reasonable accommodation for any part of the application or hiring process, you may submit your request by sending an email to . PM20 PIfc176b00f38b-8647

National Radio Astronomy Observatory Title: Track Equipment Operator I-II (98) Location: NRAO Very Large Array, Magdalena, New Mexico, United States of America Requisition Number: 98 Job Family: Track Equipment Operator Pay Type: Hourly Required Education: CRA Position Description: Position Summary The National Radio Astronomy Observatory (NRAO) is an exciting and prestigious research facility that plays a vital role in the study of the universe. The Observatory operates a variety of radio telescopes that span the globe, including the famous Very Large Array (VLA) in New Mexico, the Green Bank Telescope in West Virginia, and the Atacama Large Millimeter/submillimeter Array (ALMA) in Chile. These telescopes are among the most advanced in the world, allowing astronomers to explore the universe in unprecedented detail. The NRAO is recruiting a full-time Track Equipment Operator I-II for our team in New Mexico. Under specific guidelines and directions from the group supervisor or lead operator, performs a variety of tasks involving construction, loading, lifting, installation and maintenance of track system and regularly assists in the maintenance and repair of heavy equipment involving work related to the over 40 miles of double tracks and standard gauge used to reconfigure the antennas. This is a "Safety Sensitive" position as noted in the Position Requirements Section. The position is based at the VLA radio telescope site, 50 miles west of Socorro, NM. Socorro is a small, historical town in the Rio Grande Valley, 75 miles south of Albuquerque. What You Will be Doing: General duties of Track Equipment Operator I include repairing and rebuilding railroad track using hand tools and power tools. Examples of the duties include, but are not limited to: Performing track maintenance, track repairs and installations consisting of driving spikes into ties with spike maul; pulling spikes with claw bar; installing and removing rail anchors; sliding, placing, and aligning tie plates under rail; cutting rails with rail saw, and lifting rails with manual track jacks. Removing and replacing ties, pulling and driving spikes, shoveling rock ballast, loading and unloading equipment and materials; May be required to operate heavy equipment such as a dump truck and tractor trailer; Assisting in making track inspections such as visual inspections for broken rail, defective switches and signals, track obstructions or weather related problems such as track washouts; Handling and moving track material and equipment; Loading/unloading equipment weighing up to 50 pounds (chop saw, air tools, hydraulic tool, hand tampers); with assistance, remove and install rail using rail tongs; with assistance, remove ties and slide new ties into place using tie tongs; with assistance, move debris away from work site (spike cans, anchors); Performing track bed maintenance which involves removing and replacing ballast; tamping ballast; unloading or assisting in unloading ballast from trucks or ballast cars; Operating the following track specific equipment safely and effectively: hydraulic spike puller; air or hydraulic wrenches to loosen or tighten track bolts; rail drill; portable abrasive rail saw to cut rail; Assisting with repair and maintenance of track equipment and other related machinery or vehicles; perform preventative maintenance on equipment, as directed; may be required to transport equipment locally; Use survey equipment including levels and theodolites to measure rail and intersection levels. Possession and maintenance of appropriate certification and license is required. Occasional local and domestic travel may be required. May be required to transport equipment to other NRAO sites. Proactive compliance with NRAO and government safety policies and procedures in own work areas. Other related duties as assigned Work Environment: The Track Equipment Operator works as part of a team and must be physically able to work inside or outside in all weather conditions, near moving mechanical parts and around heavy machinery and electrical equipment. Must be able to carry equipment and tools, and operate a variety of tools and equipment. Able to lift and/or move up to 50 pounds, unassisted, and work in high noise areas with personal protective equipment (PPE). Who You Are: You have a High school diploma or equivalent You have at least Two years related experience; equivalent combination of education and experience will be considered. While not required, You may have two years of experience maintaining and operating specialized production railway maintenance equipment. Demonstrated broad knowledge in the operation of railway maintenance equipment. As well as experience with arc and MIG welding Competency Summary Experience should demonstrate effective decision-making ability. Must be able to effectively communicate orally and/or using sketches or drawings. PC experience includes e-mail, word processing and data entry. Additional Requirements Must have (or obtain within twelve months of employment or transfer) and maintain a Commercial Driver's License (minimum of a Class B; Class A preferred). Safety Sensitive The selected candidate must successfully pass a post-offer, pre-employment/pre-placement drug screen. Failure to pass the Screen will disqualify the candidate from employment consideration for a period of six months from the date of the results. Total Rewards: The NRAO offers a comprehensive total rewards package for this position, subject to eligibility requirements. We are committed to serving our employees and their families with an extensive and competitive compensation and benefits package that supports our employees' overall well-being and career growth. Compensation The NRAO strives to attract and retain dedicated, highly qualified, competent, and motivated employees by offering competitive compensation and recognition for performance. Factors which may affect starting pay may include; education, experience, skills, competencies, other qualifications of the successful candidate, as well as internal equity and labor market conditions. Benefits: NRAO's benefits package addresses the needs of employees and their families with most benefits beginning on the first day of employment. NRAO provides excellent paid time off (13 holidays, annual accrual of up to 24 vacation days and 15 sick days, additional time off for doctor/dentist visits, and 8 weeks of paid parental leave). Medical, dental and vision plans are effective on the first day of employment. NRAO's retirement benefit contributes an amount equal to 10 percent of a qualified participant's base pay with no required employee contribution; we also offer an optional supplemental, tax-deferred plan for employee retirement contributions. Application Instructions: Select the "Apply" button. Please be prepared to upload your current CV/Resume and a cover letter describing interest and suitability for the position Equal Opportunity Employer Statement: AUI is an equal opportunity employer. To view our complete statement, please visit . If you require reasonable accommodation for any part of the application or hiring process, you may submit your request by sending an email to . PM20 PIa82083cabad3-2936

Join Our Team at Warren, LLC - Installer Position Are you skilled in installing truck equipment or eager to learn? Warren, LLC is hiring a full-time Installer to join our team. You will be responsible for installing dump bodies, trailers, wet kits, 5th wheels, and other truck equipment according to company and customer standards. Specifically, the front end of the installation. Hydraulic and electrical knowledge are a plus! If you are reliable and detail-oriented, we want to hear from you! Benefits: Paid Holidays: Enjoy 9 paid holidays each year. Vacation: Earn 40 hours of vacation after your first year. Health Insurance: Choose between a PPO or HSA health plan after 60 days, with partial employer payment. We also offer a company match of up to $100/month for the HSA. Life Insurance: Receive basic life insurance for free after 60 days. 401(k) Plan: Eligible for a safe harbor match after 12 months of employment. Overtime Opportunities: Earn extra income with available overtime hours. Your Role: As an Installer at Warren, LLC, you will: Follow designated schedules and tasks as directed by your manager/supervisor to ensure on-time delivery of completed units. Maintain shop supplies, work area, and tools to ensure efficient operation. Weld, install, repair, and maintain hydraulic, pneumatic, and electrical machinery, parts, and systems as instructed by your supervisor. Adhere to all safety rules and guidelines as outlined in the Warren Handbook. Willingness to cross-train to learn other skillsets and positions Qualifications: Experience with electrical and mechanical required. Any welding, hydraulic, pneumatic, or installation experience is a plus. Strong commitment to safety and proper use of PPE. Preferred Skills: Welding and Fabricating Willingness to learn and cross-train in other areas as needed. Physical Demands: Ability to stand and work for extended periods. Ability to lift up to 50 lbs. Frequent bending, stooping, and reaching required. Primarily works in a shop environment with exposure to machinery and tools. Position Type/Expected Hours of Work: Full-time position with required punctuality and shift attendance. Business hours are set by the manager, and mandatory overtime may be required. About Us: Warren, LLC has been a leader in truck equipment manufacturing since 1993. We produce high-quality products for industries like municipalities, construction, and agriculture. Our mission is to provide exceptional value while supporting the professional growth of our employees. EEOC Statement: Warren, LLC is an equal opportunity employer. We welcome all qualified applicants and do not discriminate based on race, color, religion, sex, national origin, age, disability, or genetic information. Warren, LLC - Building Quality Together Compensation details: 15-21 Hourly Wage PIf9777c5-

JOB DESCRIPTION Full Time Position Starting Hourly Rate: $25.02 Pay Scale/Grade: H9 FLSA Classification: Non-exempt Summary: Assist mechanics with major mechanical repair and maintenance of gasoline and diesel powered automotive and heavy equipment owned and operated by the SWDA, using standard practices and equipment of the automotive trade. Operates some heavy equipment. Must be able to train other mechanics and lend support when called upon. Must be able to supervise mechanics, mechanic helpers and laborers working non-standard hours. Benefits: Full-time employees are eligible for benefits. These benefits include : Sick and Annual Leave Competitive and Affordable Medical, Dental, and Vision Insurance Retirement benefits through the Retirement Systems of Alabama Free Employee Assistance Program Life Insurance Long Term Disability Insurance 14 Paid Holidays Flexible Spending Account Free AirMed Care: Ambulance (Ground and Air Coverage) Deferred Compensation Plan Options Short Term Disability Options Essential Job Functions: Automotive Repair and Maintenance Tunes engines including testing/cleaning/replacement of spark plugs, adjusting timing, valves, carburetors, fuel injectors, and replacement of ignitions systems. Assist mechanic in removing and disassembling major units such as engine, transmission, differential; inspects parts for wear, and reassembles. Repairs and replaces parts such as pistons, rods, gears, and bearings. Overhauls and replaces carburetors, generators, radiators, alternators, starters, distributors and water pumps, and fuel injection pumps. Rewires ignition system, lights and instrument panel. Turns drums, realigns and adjusts brakes, aligns front end, repairs or replaces shock absorbers. Replaces and adjusts headlights, and installs or repairs accessories such as radios, heaters, mirrors, and windshield wipers. Troubleshoots hydraulic system and replace hydraulic pumps and hydraulic cylinders. Check and repair electric, pressurized and air operated power take off systems. Assemble hydraulic hose and replace when necessary. Troubleshoot and repair electric systems. Capable of using computer diagnostic equipment on engines. Must be capable of checking and replacing turbo chargers. Capable of diagnosing and repairing air brake systems and air brakes. Experience in checking and repairing air conditioning systems. Capable of repairing refuse bodies and related hydraulic systems. Heavy Equipment Repair and Maintenance Analyzes malfunctions, and repairs, rebuilds and maintains heavy construction equipment such as motor graders, backhoes, bulldozers, landfill compactors, etc. Assist mechanics in replacing defective engines and subassemblies. Assists with replacing or repairing major components, attachments or implements such as blades, tracks compressors, etc. Miscellaneous Welds to repair broken or cracked frames, bars, plates, and other metal objects on machinery. Fills holes and builds up metal parts. Replaces batteries, hydraulic fluid, oil, antifreeze/coolant, etc. Repairs or replaces tires. Performs related mechanic duties as required. Performs various duties including operation of equipment and some manual labor as requested by mechanic. Tests repaired equipment to ensure operating efficiency. JOB REQUIREMENTS Required Skills, Abilities and Knowledge: (Any item with an asterisk will be taught on the job.) Verbal skills to communicate information to supervisors and co-workers. Writing skills to clearly and neatly complete routine forms and order parts. Reading skills to understand equipment and maintenance manuals, parts lists, instructions. Math skills to understand precision gauges to measure and fit parts. Listening skills to receive information about equipment problems. Skills in the use of hand and machine tools and equipment used in automotive repair. Skills in the use of major items of electronic and mechanical shop equipment and machinery. Skills in operating various types of equipment. Skills in analyzing and diagnosing problems in automotive and heavy construction equipment. Knowledge of safety rules, including accident causes and prevention. Ability to work independently without close supervision. Education, Experience and Special Requirements: Possess a valid driver's license with a minimum Class B CDL; Class A preferred. Considerable experience in operating specialized landfill equipment. Five (5) years' experience in performing the full range of operations with fifth wheel tractor /trailer trucks, bulldozer, landfill compactor, rubber tire loader, grinder, windrow turner and other types of heavy equipment. Possesses communication skills to promote the SWDA's policy of good will to the general public at the landfill. Willing to work non-standard hours when necessary. Willing to provide personal hand tools. Willing to travel to pick up parts and materials out of area. Physical Requirements: See well enough to read regular print and numbers without error or transposition and inspect small parts. Hear well enough to talk on telephone, to determine mechanical problems and respond to verbal communication. Speak clearly enough to communicate information in a polite, courteous manner. Safely operate assigned tools, equipment, and vehicles. Constantly using vision and hearing when reading monitors, being aware of surroundings and listening to equipment, traffic and alarms. Body mobility to perform maintenance and operate various types of equipment; Body movement of mobility to bend, move, stand, and lift; Physical dexterity sufficient to operate levers, gears, etc. Use of hands and fingers to write, perform manual labor and use with tools. Ability to lift, carry and/or move up to 100 pounds. Frequently standing, walking, kneeling, crouching, crawling, and climbing when performing daily tasks and monitoring equipment; bending to connect parts or use tools and balancing when mounting and dismounting heavy equipment; Frequently pushing/pulling equipment, reaching for of handling tools and supplies. Tasks are regularly performed with exposure to adverse environmental conditions, such as extreme heat or extreme cold, dirt, dust, pollen, odors, wetness, humidity, rain, fumes, temperature and noise extremes, machinery, vibrations, electric currents, traffic hazards, animals/wildlife, toxic/poisonous agents, violence, disease, or pathogenic substances. PIea4af26ab53e-1367

Description: The Agriculture Equipment Operator undertakes a variety of day-to-day farming related tasks. This position is an integral part of ensuring that the farm of operations run smoothly and utilizes tractors or trucks. This position is required to perform a variety of traditional farm tasks requiring physical labor under general supervision. In this role, there will be interaction with others, and communication is important. The goal is to transport resources, produce and finished goods to and from fields to farm and farm to fields. Job Details Job Type: Seasonal (End of August through mid-October) Job Schedule: Monday-Saturday; Approximately 7:00am to 7:00pm Work Location: Grand Marsh, WI Requirements: Specific Duties: Truck operating duties: Pick up and drop off full produce loads from field to farm Transport equipment to fields. Be communicating with Tractor Operators where they need trailers and what is the most efficient trailer exchange. Communicate with field and packhouse as to status to ensure smooth operations Communicate with Manager if any mechanical issues occur with equipment Operate safely Tractor operating duties: Transport trailers or drive buses through the field for field crews to pick up produce Monitor the crew picking up pumpkins, go faster or slower as needed. Understand and navigate the correct rows you need to go down. Communicate with Field Supervisor for specific direction. Communicate with Field Supervisor/truck driver when you need trailers or when a bus is required. Observe where the previous tractor driver has driven, and follow their progress Physical Demands: The majority of this job is preformed operating either a truck or tractor. in the course of this job the driver may need to lift up to 30 pounds. Requirements: Valid Driver's License 12 Hour shift are required Compensation details: 13-15 Hourly Wage PI4d33daa64ed0-2511

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Diesel Mechanic Helper 2nd Shift US-PA-Hummelstown Job ID: Type: Regular Full-Time # of Openings: 1 Category: Maintenance Harrisburg Division Overview Harrisburg Division, a division of H&K Group, Inc. , is looking for 2 nd -shift diesel mechanic helpers. This self-motivated, organized, competent, and professional individual works with the diesel mechanics while learning to repair and maintain electric, diesel, and gasoline vocational trucks. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Industry Training programs and on-the-job training Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Perform all work adhering to OSHA and H&K Safety policies Completes all paperwork required to track work and labor Works with mechanics to: Repair or replace defective parts Test-operate to verify correction of malfunction Perform state inspections and complete servicing Collision repair, sanding, prep, and painting Maintain all trucks, cars, trailers, and equipment to comply with DOT, OSHA/MSHA regulations Other duties as assigned Qualifications Required Skills, Education, and Experience High school diploma or equivalent (such as the GED) from an accredited educational institution OR relevant experience and/or training Basic knowledge and aptitude for mechanical systems Driver's license Clean driving record Customer Service and Teamwork Learning agility Willing and able to work a 2 nd - or 3 rd -shift schedule Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience Related experience and/or training Technical school or college in the mechanical field Experience working in heavy civil construction, road construction, or quarries Class A or B CDL or ability to obtain within one year OSHA, MSHA, or other relevant safety certifications Physical Demands Occasionally required to stand, walk, sit, talk, hear, climb, balance, and crawl Frequently stoop, crouch, kneel, and use hands to finger, feel, and grasp Occasionally lift and/or move up to 75 pounds Work Environment Noise level is loud at times Required to work outdoors in all environments at times Hours regularly exceed 40 in a week and 8 in a day H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits ! PI28a2c77c0d36-4411

Description: ARE YOU LOOKING FOR THE NEXT STEP IN YOUR MECHANICAL CAREER? Competitive Pay - Up to $26/hr based on experience and certifications Monthly Bonus Opportunity Full Benefits Package Paid Time Off Holiday Pay On-Site Training Premium Pay for After-Hours Service Calls And More Here at JAM Best One Fleet Service, our mission is to Create Raving Fans, and this is not just a commitment to our customers! We believe that our greatest asset is our talented and dedicated team, and we strive to create a work environment that fosters growth, collaboration, and personal fulfillment. We believe in open communication, recognizing and celebrating achievements, and promoting a healthy work-life balance. Join us and become a valued member of our team, where your contributions are valued, and your potential is encouraged. Position Overview This position will be accountable for performing fast, accurate, high-quality mechanical service and diagnostics on light, medium and heavy trucks, as well as agricultural vehicles. Services include, but are not limited to: Preventative Maintenance Service Alignments Chassis, Driveline & Hydraulic Systems Repair A/C Systems Diagnosis & Repair Brake Systems Maintenance & Repair Tire and Wheel Service Trailer Repair Suspension Repair Electrical Diagnostics & Repair 24-Hour Emergency Road Service (On-Call Rotation) This position is technical in nature and requires a large commitment and investment in personal training and development. As you gain knowledge and experience, you will be able to start working towards your A.S.E. or State Certifications (company paid). Requirements: Recommended Certifications: Brakes and Braking Systems, Steering and Suspension Preferred Certifications: Electrical, Engine Repair, Drive Train Must have at least 2 years of experience servicing automotive, commercial truck, or farm vehicles. You must have a current valid driver's license with a satisfactory driving record Able to lift 75 pounds regularly and up to 100 pounds occasionally Must be able to stand, kneel and crawl while operating equipment and tools Must also be at least 21 years old Strong written and verbal communication skills The ability to work a full shift, come to work on time, and work according to the necessary schedule to meet job requirements with or without reasonable accommodation is an essential function of this position. JAM Best One Fleet Service is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Compensation details: 20-36 Hourly Wage PIa6ecfd8d5-

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Shop Mechanic 2nd Shift US-PA-Hazleton Job ID: Type: Regular Full-Time # of Openings: 2 Category: Maintenance Hazleton Division Overview Hazleton Division of H&K Group, Inc. , is looking for 2nd shift Shop Mechanics. This self-motivated, organized, competent, and professional individual repairs and maintains electric, diesel, and gasoline vocational trucks. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Perform all work adhering to OSHA and H&K Safety policies Reads job order and observes and listens to truck or equipment in operation to determine malfunction and to plan work procedures. Installs new ignition systems, aligns front wheels, changes, or recharges batteries, and replaces transmissions and other parts. Replaces gas or diesel engines. Examines protective guards, loose bolts, and specified safety devices on trucks and equipment, and adjusts. Lubricates and services vehicles Fabricates special lifting or towing attachments, hydraulic systems, shields, or other devices according to schematic drawings. Collision repair, sand, prep, and paint Completes all standard maintenance on trucks and equipment and ensures state inspection requirements are met for cars, trucks, and trailers Other duties as assigned Qualifications Required Skills, Education, and Experience One-year certificate from an accredited college or technical school in diesel mechanics or a related field OR 2 years of related experience and/or training Equivalent combinations of education and experience may be considered Class A or B CDL or ability to obtain within one year Clean driving record Customer Service and Teamwork Mathematical Skills Willing and able to work a 2 nd shift schedule Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience 4 years of related experience and/or training State Inspection license Experience working in heavy civil construction, road construction, or quarries OSHA, MSHA, or other relevant safety certifications Physical Demands Occasionally required to stand, walk, sit, talk, hear, climb, balance, and crawl Frequently required to Stoop, crouch, kneel Use hands to finger, feel, and grasp Occasionally lift and/or move up to 75 pounds Work Environment Noise level is loud at times At times required to work outdoors in all environments Hours regularly exceed 40 in a week and 8 in a day H&K Group, Inc.'s (H&K's) Hazleton Division (formerly Hazleton Site Contractors) has been a proud member of our heavy civil construction team since 2002. Strategically located in Humboldt Industrial Park just north of Hazleton, PA, the Hazleton Division primarily serves Luzerne, Carbon, Schuylkill, Columbia, Northumberland, Montour, and Monroe Counties. The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. Final determination on pay will be made by company leadership consistent with the scope of work and considering the candidates' education, experience, skills, past performance, demonstrated leadership, and influence. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits ! PI4b19a789de2d-0746

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Shop Mechanic 1st and 2nd Shift US-PA-Easton Job ID: Type: Regular Full-Time # of Openings: 1 Category: Maintenance Lehigh Valley Division Overview Lehigh Valley Division of H&K Group, Inc. , is looking for 1st and 2nd shift Shop Mechanics. This self-motivated, organized, competent, and professional individual repairs and maintains electric, diesel, and gasoline vocational trucks. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Perform all work adhering to OSHA and H&K Safety policies Reads job order and observes and listens to truck or equipment in operation to determine malfunction and to plan work procedures. Installs new ignition systems, aligns front wheels, changes, or recharges batteries, and replaces transmissions and other parts. Replaces gas or diesel engines. Examines protective guards, loose bolts, and specified safety devices on trucks and equipment, and adjusts. Lubricates and services vehicles Fabricates special lifting or towing attachments, hydraulic systems, shields, or other devices according to schematic drawings. Collision repair, sand, prep, and paint Completes all standard maintenance on trucks and equipment and ensures state inspection requirements are met for cars, trucks, and trailers Other duties as assigned Qualifications Required Skills, Education, and Experience One-year certificate from an accredited college or technical school in diesel mechanics or a related field OR 2 years of related experience and/or training Equivalent combinations of education and experience may be considered Class A or B CDL or ability to obtain within one year Clean driving record Customer Service and Teamwork Mathematical Skills Willing and able to work a 1st or 2 nd shift schedule Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience 4 years of related experience and/or training State Inspection license Experience working in heavy civil construction, road construction, or quarries OSHA, MSHA, or other relevant safety certifications Physical Demands Occasionally required to stand, walk, sit, talk, hear, climb, balance, and crawl Frequently required to Stoop, crouch, kneel Use hands to finger, feel, and grasp Occasionally lift and/or move up to 75 pounds Work Environment Noise level is loud at times At times required to work outdoors in all environments Hours regularly exceed 40 in a week and 8 in a day H&K Group, Inc.'s (H&K's) Lehigh Valley Division (formerly Lehigh Valley Site Contractors) has been a proud member of our heavy civil construction team since 1998. Strategically located just north of the City of Easton, PA, the Lehigh Valley Division provides complete heavy civil construction and contracting services to customers and clients throughout the Lehigh Valley, PA region, western NJ and beyond. The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. Final determination on pay will be made by company leadership consistent with the scope of work and considering the candidates' education, experience, skills, past performance, demonstrated leadership, and influence. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits ! PI3c7abcb0eeb0-1756

Schedule: Monday through Friday 1pm start time occasional weekend work. Starting hourly rate between $29 and $33 We are looking for an Experienced Diesel Technician to join our team in Joliet. The Diesel Mechanic will strive to meet or exceed goal times for repairs. Able to work unsupervised for extended periods of time and assist in training technicians in lower job classifications. Training & Experience: Technician I employees should possess the following training and experience: • Minimum of six (6) years practical experience or an equivalent combination of related education and experience • Specialized training and/or experience in the overhaul of major components (i.e., Mack - Cummins - Detroit Diesel Engines, etc.) • Be proficient in the use of all tools of the trade (Welding equipment, power tools and shop machinery) Major Function: Properly diagnose, overhaul, adjust and repair all series of truck and trailer equipment including but not limited to the following: • Engines (Gas and Diesel) - Diagnose, remove, and rebuild and reinstallation, as necessary. • Transmissions (Manual & Automatic) - Diagnose, remove rebuild and reinstallation, as necessary. Differential/Power Dividers - Diagnose, remove, rebuild and reinstallation, as necessary. • Starters/Alternators - Diagnose, remove, repair, and replace as censer. • Air Conditioning Systems - Trained/Certified, diagnose electrical and mechanical defects, repair, component replacement, evaluation, and charging. Fan Clutches - Diagnose, remove, rebuild and reinstallation, as necessary. • Power Steering Systems - Diagnose, adjust, and repair, as necessary. • Electrical/Brake/Cooling Systems - Diagnose, remove, rebuild, reinstallation, and adjustment, as necessary. Brake certified. • Clutches - Diagnose, remove and reinstallation, as necessary. • PTO Systems - Installation of PTO System and related hydraulic components. Diagnose, remove rebuild and reinstallation and adjustment, as necessary. • Tires - Remove, install and algin chassis. • Engine Electronics (Gas and Diesel) - adjust and repair, as necessary. Working Conditions: • Work outdoors in different weather conditions. • Exposure to used cooking oil odors. Specific Duties: Technician I Employees perform the following functions with no assistance: • Perform all levels of preventative maintenance • Identify and determine parts require for repair of disassembled units • Identify warrantable repairs and document appropriately • Maintain work area appearance and safety • Road test vehicles as necessary • Performance and prospective duties in a timely and efficient matter • All duties of lower job classifications. • Follow all safety rules and procedures. • Fully participate and support all safety initiatives. • Think safety and continually scan the work environment; make suggestions for corrections and improvements. • Other duties as assigned Qualifications Required: • High school diploma or equivalent. • Ability to lift, push or pull up to at least 50 lbs. • Ability to provide the above major functions, specific duties and with the experience listed above. • DOT certified medical card. • Good driving record. • Ability to drive manual 8- and/or 10 and or 13 transmissions preferred. • Ability to drive automatic transmissions and use of PTO. • Superb communication skills (verbal and written). • Computer skills. • Team player. • Multitasking skills. All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. Powered by JazzHR PI2b8aabe2ce49-4303

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers Inc., QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Weekly Competitive Pay - Pay is $30 - $35 / hour depending on experience and location. (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Offering a shift differential Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Duties/Responsibilities Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Required Skills/Abilities Must possess at least 3 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 2 years as a fleet mechanic. Minimum of 3 years of DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Open to working either a 1st shift (M-F 7am-3:30pm) or a 2nd shift (2pm-10:30pm) Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 2 year(s): Fleet mechanic experience 3 year(s): DOT HM-183 certification, Training or experience. 3 year(s): Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 year(s): Experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers, QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Competitive Pay - Pay is $30 - $35 / Hour (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Welder /Trailer Mechanic Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned. Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Welder / Trailer Mechanic Required Skills/Abilities: Must possess at least 3/4 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 3/4 years as a fleet mechanic. Minimum of 3/4 years of DOT HM-183 certification, training or experience. ASE Certification not required but recommended. Minimum of 3 years operating welding equipment (TIG), R-stamp Certification. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 3 year(s): Operate welding equipment (TIG) R-stamp Certification 3 - 4 years: fleet mechanic. DOT HM-183 certification, Training or experience knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 - 4 years: experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers, QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Competitive Pay - Pay is $30 - $35 / Hour (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Welder /Trailer Mechanic Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned. Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Welder / Trailer Mechanic Required Skills/Abilities: Must possess at least 3/4 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 3/4 years as a fleet mechanic. Minimum of 3/4 years of DOT HM-183 certification, training or experience. ASE Certification not required but recommended. Minimum of 3 years operating welding equipment (TIG), R-stamp Certification. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 3 year(s): Operate welding equipment (TIG) R-stamp Certification 3 - 4 years: fleet mechanic. DOT HM-183 certification, Training or experience knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 - 4 years: experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers, QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Competitive Pay - Pay is $30 - $35 / Hour (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Welder /Trailer Mechanic Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned. Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Welder / Trailer Mechanic Required Skills/Abilities: Must possess at least 3/4 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 3/4 years as a fleet mechanic. Minimum of 3/4 years of DOT HM-183 certification, training or experience. ASE Certification not required but recommended. Minimum of 3 years operating welding equipment (TIG), R-stamp Certification. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 3 year(s): Operate welding equipment (TIG) R-stamp Certification 3 - 4 years: fleet mechanic. DOT HM-183 certification, Training or experience knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 - 4 years: experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers, QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Competitive Pay - Pay is $30 - $35 / Hour (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Welder /Trailer Mechanic Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned. Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Welder / Trailer Mechanic Required Skills/Abilities: Must possess at least 3/4 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 3/4 years as a fleet mechanic. Minimum of 3/4 years of DOT HM-183 certification, training or experience. ASE Certification not required but recommended. Minimum of 3 years operating welding equipment (TIG), R-stamp Certification. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 3 year(s): Operate welding equipment (TIG) R-stamp Certification 3 - 4 years: fleet mechanic. DOT HM-183 certification, Training or experience knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 - 4 years: experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers Inc., QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Weekly Competitive Pay - Pay is $30 - $35 / hour depending on experience and location. (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Offering a shift differential Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Duties/Responsibilities Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Required Skills/Abilities Must possess at least 3 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 2 years as a fleet mechanic. Minimum of 3 years of DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Open to working either a 1st shift (M-F 7am-3:30pm) or a 2nd shift (2pm-10:30pm) Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 2 year(s): Fleet mechanic experience 3 year(s): DOT HM-183 certification, Training or experience. 3 year(s): Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 year(s): Experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers Inc., QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Weekly Competitive Pay - Pay is $30 - $35 / hour depending on experience and location. (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Offering a shift differential Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Duties/Responsibilities Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Required Skills/Abilities Must possess at least 3 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 2 years as a fleet mechanic. Minimum of 3 years of DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Open to working either a 1st shift (M-F 7am-3:30pm) or a 2nd shift (2pm-10:30pm) Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 2 year(s): Fleet mechanic experience 3 year(s): DOT HM-183 certification, Training or experience. 3 year(s): Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 year(s): Experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers, QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Competitive Pay - Pay is $30 - $35 / Hour (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Welder /Trailer Mechanic Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned. Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Welder / Trailer Mechanic Required Skills/Abilities: Must possess at least 3/4 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 3/4 years as a fleet mechanic. Minimum of 3/4 years of DOT HM-183 certification, training or experience. ASE Certification not required but recommended. Minimum of 3 years operating welding equipment (TIG), R-stamp Certification. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 3 year(s): Operate welding equipment (TIG) R-stamp Certification 3 - 4 years: fleet mechanic. DOT HM-183 certification, Training or experience knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 - 4 years: experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers Inc., QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Weekly Competitive Pay - Pay is $30 - $35 / hour depending on experience and location. (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Offering a shift differential Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Duties/Responsibilities Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Required Skills/Abilities Must possess at least 3 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 2 years as a fleet mechanic. Minimum of 3 years of DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Open to working either a 1st shift (M-F 7am-3:30pm) or a 2nd shift (2pm-10:30pm) Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 2 year(s): Fleet mechanic experience 3 year(s): DOT HM-183 certification, Training or experience. 3 year(s): Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 year(s): Experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquid chemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Quality Repair Solutions (QRS Shops), a fully-owned division of Quality Carriers, Inc., specializes in comprehensive tractor and trailer maintenance. Most of our 60+ Repair and Maintenance shops are R Stamp Certified and we provide many opportunities for growth across locations and within our shops. We look forward to knowledgeable and ambitious people to join our team! Why do you want to work at Quality Carriers Inc., QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: Weekly Competitive Pay - Pay is $30 - $35 / hour depending on experience and location. (Offering a $1.00 shift diff.) Tool/Boot Reimbursement Program Offering a shift differential Referral Program Sign on Bonuses Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts Generous Paid Time Off/ Holiday Schedule Matching 401K Duties/Responsibilities Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards. Operate a yard hostler truck to move trailers within the facility yard and the shop as needed. Order and receive parts and supplies as needed. Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste. Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety. Using welding equipment. Perform miscellaneous duties as assigned Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Required Skills/Abilities Must possess at least 3 years of experience in repair and service of trailers and medium duty trucks. Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems. Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations. Ability to use vehicle diagnostic software. Minimum of 2 years as a fleet mechanic. Minimum of 3 years of DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. High school diploma, completion of G.E.D. required. Preferred Qualifications Dynamic, ambitious and engaged team player. Open to working either a 1st shift (M-F 7am-3:30pm) or a 2nd shift (2pm-10:30pm) Quality Carriers, Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Experience Required 2 year(s): Fleet mechanic experience 3 year(s): DOT HM-183 certification, Training or experience. 3 year(s): Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 3 year(s): Experience in repair and service of trailers and medium duty trucks. Education Required High School or better Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.