American StaffCorp Job Board
Oklahoma City, Oklahoma
Job Description Job Description Press Brake Operator (2nd shift) Summary The Press Brake Operator II is responsible for the independent setup, programming, operation, and quality verification of hydraulic press brakes used to manufacture components for hospital patient care assemblies. This position requires the ability to interpret engineering drawings, select appropriate tooling, troubleshoot production issues, and maintain quality standards while meeting production requirements. Essential Duties and Responsibilities Gather, verify, and organize materials required for production. Review work orders, engineering drawings, and specifications prior to setup and production. Independently set up and operate hydraulic press brakes for a variety of part configurations and material types. Create, modify, and optimize press brake programs to ensure efficient production and quality output. Select appropriate tooling, dies, and machine parameters based on part specifications and material requirements. Interpret complex blueprints, drawings, and work instructions to ensure accurate fabrication. Produce first-article parts and perform dimensional inspections to verify conformance to specifications. Perform in-process inspections and verify parts at established intervals to ensure continued compliance with quality standards. Manufacture required quantities while maintaining production efficiency and quality expectations. Inspect completed parts for dimensional accuracy, burrs, edge quality, and overall workmanship. Troubleshoot machine, tooling, and production issues and implement corrective actions as needed. Complete all required production records, inspection documents, and Press Brake Logs accurately and completely. Notify the Lead or Supervisor of quality concerns, material shortages, equipment issues, or production delays. Train and assist Press Brake Operator I personnel with machine operation, setup techniques, quality requirements, and safety procedures. Understand and follow exposure prevention, hazard recognition, and workplace safety procedures. Maintain a clean, organized, and safe work area, including adherence to end-of-shift procedures. Recommend improvements to manufacturing processes, tooling, work instructions, and product designs. Follow all procedures and work instructions as documented by the Quality Management System. Report and document quality issues related to products, processes, or procedures to Supervisors or Quality personnel. Perform additional duties and responsibilities as assigned. Maintain a customer-focused approach in all activities to support product quality and customer satisfaction. Prerequisites and Qualifications Successful completion of the Press Brake Safety Program. High School Diploma or equivalent required. Minimum of 2-5 years of press brake operation experience in a manufacturing environment preferred. Demonstrated ability to independently set up and program hydraulic press brakes. Strong understanding of press brake tooling, die selection, bend allowances, and fabrication processes. Ability to read and interpret engineering drawings, blueprints, and technical specifications. Experience using precision measuring instruments, including calipers, micrometers, tape measures, angle gauges, and other inspection equipment. Strong mathematical, mechanical, and problem-solving skills. Ability to troubleshoot manufacturing and quality issues with minimal supervision. Strong attention to detail, organizational skills, and production planning abilities. Ability to train and mentor less experienced operators. Effective verbal and written communication skills in English. Basic computer skills for data entry, production tracking, and program management. Physical Demands This position requires an individual in good physical condition who can meet the following requirements: Work in a typical non-air-conditioned manufacturing, shop, or warehouse environment. Lift, carry, push, and pull up to 50 pounds repeatedly throughout the shift. Perform repetitive motions including bending, twisting, reaching, kneeling, and grasping. Stand and walk for the majority of the work shift. Frequently handle metal parts, tooling, and materials. Maintain visual acuity necessary to inspect parts, read blueprints, and perform quality checks. Temp-to-hire opportunity, and the pay is $18.00 and up, DOE 1st Shift - 2nd Shift - M-TH - 2 PM - 12:30 AM
07/28/2026
Full time
Job Description Job Description Press Brake Operator (2nd shift) Summary The Press Brake Operator II is responsible for the independent setup, programming, operation, and quality verification of hydraulic press brakes used to manufacture components for hospital patient care assemblies. This position requires the ability to interpret engineering drawings, select appropriate tooling, troubleshoot production issues, and maintain quality standards while meeting production requirements. Essential Duties and Responsibilities Gather, verify, and organize materials required for production. Review work orders, engineering drawings, and specifications prior to setup and production. Independently set up and operate hydraulic press brakes for a variety of part configurations and material types. Create, modify, and optimize press brake programs to ensure efficient production and quality output. Select appropriate tooling, dies, and machine parameters based on part specifications and material requirements. Interpret complex blueprints, drawings, and work instructions to ensure accurate fabrication. Produce first-article parts and perform dimensional inspections to verify conformance to specifications. Perform in-process inspections and verify parts at established intervals to ensure continued compliance with quality standards. Manufacture required quantities while maintaining production efficiency and quality expectations. Inspect completed parts for dimensional accuracy, burrs, edge quality, and overall workmanship. Troubleshoot machine, tooling, and production issues and implement corrective actions as needed. Complete all required production records, inspection documents, and Press Brake Logs accurately and completely. Notify the Lead or Supervisor of quality concerns, material shortages, equipment issues, or production delays. Train and assist Press Brake Operator I personnel with machine operation, setup techniques, quality requirements, and safety procedures. Understand and follow exposure prevention, hazard recognition, and workplace safety procedures. Maintain a clean, organized, and safe work area, including adherence to end-of-shift procedures. Recommend improvements to manufacturing processes, tooling, work instructions, and product designs. Follow all procedures and work instructions as documented by the Quality Management System. Report and document quality issues related to products, processes, or procedures to Supervisors or Quality personnel. Perform additional duties and responsibilities as assigned. Maintain a customer-focused approach in all activities to support product quality and customer satisfaction. Prerequisites and Qualifications Successful completion of the Press Brake Safety Program. High School Diploma or equivalent required. Minimum of 2-5 years of press brake operation experience in a manufacturing environment preferred. Demonstrated ability to independently set up and program hydraulic press brakes. Strong understanding of press brake tooling, die selection, bend allowances, and fabrication processes. Ability to read and interpret engineering drawings, blueprints, and technical specifications. Experience using precision measuring instruments, including calipers, micrometers, tape measures, angle gauges, and other inspection equipment. Strong mathematical, mechanical, and problem-solving skills. Ability to troubleshoot manufacturing and quality issues with minimal supervision. Strong attention to detail, organizational skills, and production planning abilities. Ability to train and mentor less experienced operators. Effective verbal and written communication skills in English. Basic computer skills for data entry, production tracking, and program management. Physical Demands This position requires an individual in good physical condition who can meet the following requirements: Work in a typical non-air-conditioned manufacturing, shop, or warehouse environment. Lift, carry, push, and pull up to 50 pounds repeatedly throughout the shift. Perform repetitive motions including bending, twisting, reaching, kneeling, and grasping. Stand and walk for the majority of the work shift. Frequently handle metal parts, tooling, and materials. Maintain visual acuity necessary to inspect parts, read blueprints, and perform quality checks. Temp-to-hire opportunity, and the pay is $18.00 and up, DOE 1st Shift - 2nd Shift - M-TH - 2 PM - 12:30 AM
Job Description Job Description Join AccuTrex Products, Inc. - Precision Manufacturing Careers Canonsburg, PA At AccuTrex Products, Inc. , we manufacture high-precision metal components for customers who demand quality. If you take pride in your craft, value teamwork, and want to work for a company that truly invests in its people - we want to meet you! Why Work at AccuTrex? We offer some of the most competitive benefits in the region: 15 Days Paid Time Off - starting Day 1 Low employee medical premiums and low-deductible plans Safe Harbor 401(k) with company contribution Company-paid life insurance and AD&D insurance (coverage for spouse and dependents too) Dental & Vision coverage Paid lunches and breaks Paid Parental Leave Referral bonuses Shift differential for 2nd shift Fresh food options in breakrooms Clean, safety-focused shop environment Stable, growing company We believe great employees deserve great benefits! Waterjet Operator - Swing Shift availability preferred (1st and 2nd only) AccuTrex Products, Inc. is hiring an experienced Waterjet Operator to operate high-pressure waterjet equipment in our precision manufacturing facility. We are looking for a detail-oriented professional who can maintain tight tolerances, meet production standards, and contribute to continuous improvement efforts. The Waterjet Operator is responsible for machine setup, loading and unloading materials, setting offsets, monitoring performance, deburring parts, and conducting quality inspections. The role requires interpreting mechanical drawings and specifications, maintaining production rates, detecting equipment malfunctions, and performing basic preventative maintenance. Clear communication with production and quality teams is expected to ensure consistent output and shift transitions. Qualified candidates must have CAD programming experience. Strong blueprint reading skills and understanding of geometric tolerances are required. Experience using precision measuring instruments such as calipers, micrometers, depth gauges, and indicators is essential. Forklift experience is required. Candidates must possess solid math skills and demonstrate a consistent commitment to safety and quality. This is a full-time position in a manufacturing environment requiring the ability to handle large metal sheets and lift up to 55 pounds. Pay is commensurate with experience. We are seeking experienced operators who take ownership of their work and consistently deliver high-quality results.
07/28/2026
Full time
Job Description Job Description Join AccuTrex Products, Inc. - Precision Manufacturing Careers Canonsburg, PA At AccuTrex Products, Inc. , we manufacture high-precision metal components for customers who demand quality. If you take pride in your craft, value teamwork, and want to work for a company that truly invests in its people - we want to meet you! Why Work at AccuTrex? We offer some of the most competitive benefits in the region: 15 Days Paid Time Off - starting Day 1 Low employee medical premiums and low-deductible plans Safe Harbor 401(k) with company contribution Company-paid life insurance and AD&D insurance (coverage for spouse and dependents too) Dental & Vision coverage Paid lunches and breaks Paid Parental Leave Referral bonuses Shift differential for 2nd shift Fresh food options in breakrooms Clean, safety-focused shop environment Stable, growing company We believe great employees deserve great benefits! Waterjet Operator - Swing Shift availability preferred (1st and 2nd only) AccuTrex Products, Inc. is hiring an experienced Waterjet Operator to operate high-pressure waterjet equipment in our precision manufacturing facility. We are looking for a detail-oriented professional who can maintain tight tolerances, meet production standards, and contribute to continuous improvement efforts. The Waterjet Operator is responsible for machine setup, loading and unloading materials, setting offsets, monitoring performance, deburring parts, and conducting quality inspections. The role requires interpreting mechanical drawings and specifications, maintaining production rates, detecting equipment malfunctions, and performing basic preventative maintenance. Clear communication with production and quality teams is expected to ensure consistent output and shift transitions. Qualified candidates must have CAD programming experience. Strong blueprint reading skills and understanding of geometric tolerances are required. Experience using precision measuring instruments such as calipers, micrometers, depth gauges, and indicators is essential. Forklift experience is required. Candidates must possess solid math skills and demonstrate a consistent commitment to safety and quality. This is a full-time position in a manufacturing environment requiring the ability to handle large metal sheets and lift up to 55 pounds. Pay is commensurate with experience. We are seeking experienced operators who take ownership of their work and consistently deliver high-quality results.
Job Description Job Description Our client is seeking experienced Multi-Spindle Screw Machine Operators to join their precision manufacturing team. In this role, you will operate and maintain multiple spindle screw machines to produce high-quality components that meet demanding specifications. This position is ideal for a self-motivated machinist who thrives in a fast-paced production environment. 1st and 2nd shift openings available for Multi-Spindle Screw Machine Operators Pay Range: $20-$35/hr . Key Responsibilities: • Set up and operate multiple spindle screw machines to produce precision parts • Load bar stock and monitor machine cycles during production • Adjust tooling and machine settings to maintain part quality and efficiency • Monitor tool wear and replace or reset tools as needed • Perform in-process inspections using micrometers, calipers, and gauges • Complete production documentation and submit parts for final inspection • Maintain equipment, fluids, and work areas in accordance with 5S standards • Follow all safety policies and report equipment or quality issues promptly • Work collaboratively with supervisors and team members to meet production goals Check out our Google Reviews Visit us on LinkedIn and Facebook company pages If not the right job for you, tell a friend! Qualifications: High school diploma or GED preferred 5+ years of experience operating multiple spindle screw machines Ability to read blueprints and interpret work instructions Strong understanding of shop math and machining principles Proficient with precision measuring instruments Dependable with strong attention to detail and safety Physical Requirements: Ability to lift 20-50 lbs occasionally and 10-25 lbs frequently Work Environment: Manufacturing setting with exposure to noise, oils, coolants, and mechanical equipment PPE (safety glasses, gloves, hearing protection) required ITAR Compliance Requirement: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits: 401(k) with matching Dental insurance Health insurance Life insurance Paid time off Tuition reimbursement Vision insurance Please note: Employment offers are contingent upon successfully passing a drug test, E-Verify verification, and background check. Apply NOW by Clicking on "Apply Now" Or Send your resume to Or Apply online at Company Description You can be good at a lot of things. We prefer to be great at one thing. For us, that is staffing and recruiting. As a prospective Barton Staffing Solutions employee, we provide employment opportunities at Greater Chicago-land's leading companies, good pay, and the opportunity to expand your knowledge and skills while keeping your career moving forward. Excellence is our minimum standard. If this sounds like the way you work and you are ready to learn more about how we can help your career, contact us today. Company Description You can be good at a lot of things. We prefer to be great at one thing. For us, that is staffing and recruiting. As a prospective Barton Staffing Solutions employee, we provide employment opportunities at Greater Chicago-land's leading companies, good pay, and the opportunity to expand your knowledge and skills while keeping your career moving forward. Excellence is our minimum standard. If this sounds like the way you work and you are ready to learn more about how we can help your career, contact us today.
07/18/2026
Full time
Job Description Job Description Our client is seeking experienced Multi-Spindle Screw Machine Operators to join their precision manufacturing team. In this role, you will operate and maintain multiple spindle screw machines to produce high-quality components that meet demanding specifications. This position is ideal for a self-motivated machinist who thrives in a fast-paced production environment. 1st and 2nd shift openings available for Multi-Spindle Screw Machine Operators Pay Range: $20-$35/hr . Key Responsibilities: • Set up and operate multiple spindle screw machines to produce precision parts • Load bar stock and monitor machine cycles during production • Adjust tooling and machine settings to maintain part quality and efficiency • Monitor tool wear and replace or reset tools as needed • Perform in-process inspections using micrometers, calipers, and gauges • Complete production documentation and submit parts for final inspection • Maintain equipment, fluids, and work areas in accordance with 5S standards • Follow all safety policies and report equipment or quality issues promptly • Work collaboratively with supervisors and team members to meet production goals Check out our Google Reviews Visit us on LinkedIn and Facebook company pages If not the right job for you, tell a friend! Qualifications: High school diploma or GED preferred 5+ years of experience operating multiple spindle screw machines Ability to read blueprints and interpret work instructions Strong understanding of shop math and machining principles Proficient with precision measuring instruments Dependable with strong attention to detail and safety Physical Requirements: Ability to lift 20-50 lbs occasionally and 10-25 lbs frequently Work Environment: Manufacturing setting with exposure to noise, oils, coolants, and mechanical equipment PPE (safety glasses, gloves, hearing protection) required ITAR Compliance Requirement: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits: 401(k) with matching Dental insurance Health insurance Life insurance Paid time off Tuition reimbursement Vision insurance Please note: Employment offers are contingent upon successfully passing a drug test, E-Verify verification, and background check. Apply NOW by Clicking on "Apply Now" Or Send your resume to Or Apply online at Company Description You can be good at a lot of things. We prefer to be great at one thing. For us, that is staffing and recruiting. As a prospective Barton Staffing Solutions employee, we provide employment opportunities at Greater Chicago-land's leading companies, good pay, and the opportunity to expand your knowledge and skills while keeping your career moving forward. Excellence is our minimum standard. If this sounds like the way you work and you are ready to learn more about how we can help your career, contact us today. Company Description You can be good at a lot of things. We prefer to be great at one thing. For us, that is staffing and recruiting. As a prospective Barton Staffing Solutions employee, we provide employment opportunities at Greater Chicago-land's leading companies, good pay, and the opportunity to expand your knowledge and skills while keeping your career moving forward. Excellence is our minimum standard. If this sounds like the way you work and you are ready to learn more about how we can help your career, contact us today.
Job Description Job Description Our client is seeking experienced Multi-Spindle Screw Machine Operators to join their precision manufacturing team. In this role, you will operate and maintain multiple spindle screw machines to produce high-quality components that meet demanding specifications. This position is ideal for a self-motivated machinist who thrives in a fast-paced production environment. 1st and 2nd shift openings available for Multi-Spindle Screw Machine Operators Pay Range: $20-$35/hr . Key Responsibilities: • Set up and operate multiple spindle screw machines to produce precision parts • Load bar stock and monitor machine cycles during production • Adjust tooling and machine settings to maintain part quality and efficiency • Monitor tool wear and replace or reset tools as needed • Perform in-process inspections using micrometers, calipers, and gauges • Complete production documentation and submit parts for final inspection • Maintain equipment, fluids, and work areas in accordance with 5S standards • Follow all safety policies and report equipment or quality issues promptly • Work collaboratively with supervisors and team members to meet production goals Check out our Google Reviews Visit us on LinkedIn and Facebook company pages If not the right job for you, tell a friend! Qualifications: High school diploma or GED preferred 5+ years of experience operating multiple spindle screw machines Ability to read blueprints and interpret work instructions Strong understanding of shop math and machining principles Proficient with precision measuring instruments Dependable with strong attention to detail and safety Physical Requirements: Ability to lift 20-50 lbs occasionally and 10-25 lbs frequently Work Environment: Manufacturing setting with exposure to noise, oils, coolants, and mechanical equipment PPE (safety glasses, gloves, hearing protection) required ITAR Compliance Requirement: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits: 401(k) with matching Dental insurance Health insurance Life insurance Paid time off Tuition reimbursement Vision insurance Please note: Employment offers are contingent upon successfully passing a drug test, E-Verify verification, and background check. Apply NOW by Clicking on "Apply Now" Or Send your resume to Or Apply online at Company Description You can be good at a lot of things. We prefer to be great at one thing. For us, that is staffing and recruiting. As a prospective Barton Staffing Solutions employee, we provide employment opportunities at Greater Chicago-land's leading companies, good pay, and the opportunity to expand your knowledge and skills while keeping your career moving forward. Excellence is our minimum standard. If this sounds like the way you work and you are ready to learn more about how we can help your career, contact us today. Company Description You can be good at a lot of things. We prefer to be great at one thing. For us, that is staffing and recruiting. As a prospective Barton Staffing Solutions employee, we provide employment opportunities at Greater Chicago-land's leading companies, good pay, and the opportunity to expand your knowledge and skills while keeping your career moving forward. Excellence is our minimum standard. If this sounds like the way you work and you are ready to learn more about how we can help your career, contact us today.
07/17/2026
Full time
Job Description Job Description Our client is seeking experienced Multi-Spindle Screw Machine Operators to join their precision manufacturing team. In this role, you will operate and maintain multiple spindle screw machines to produce high-quality components that meet demanding specifications. This position is ideal for a self-motivated machinist who thrives in a fast-paced production environment. 1st and 2nd shift openings available for Multi-Spindle Screw Machine Operators Pay Range: $20-$35/hr . Key Responsibilities: • Set up and operate multiple spindle screw machines to produce precision parts • Load bar stock and monitor machine cycles during production • Adjust tooling and machine settings to maintain part quality and efficiency • Monitor tool wear and replace or reset tools as needed • Perform in-process inspections using micrometers, calipers, and gauges • Complete production documentation and submit parts for final inspection • Maintain equipment, fluids, and work areas in accordance with 5S standards • Follow all safety policies and report equipment or quality issues promptly • Work collaboratively with supervisors and team members to meet production goals Check out our Google Reviews Visit us on LinkedIn and Facebook company pages If not the right job for you, tell a friend! Qualifications: High school diploma or GED preferred 5+ years of experience operating multiple spindle screw machines Ability to read blueprints and interpret work instructions Strong understanding of shop math and machining principles Proficient with precision measuring instruments Dependable with strong attention to detail and safety Physical Requirements: Ability to lift 20-50 lbs occasionally and 10-25 lbs frequently Work Environment: Manufacturing setting with exposure to noise, oils, coolants, and mechanical equipment PPE (safety glasses, gloves, hearing protection) required ITAR Compliance Requirement: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits: 401(k) with matching Dental insurance Health insurance Life insurance Paid time off Tuition reimbursement Vision insurance Please note: Employment offers are contingent upon successfully passing a drug test, E-Verify verification, and background check. Apply NOW by Clicking on "Apply Now" Or Send your resume to Or Apply online at Company Description You can be good at a lot of things. We prefer to be great at one thing. For us, that is staffing and recruiting. As a prospective Barton Staffing Solutions employee, we provide employment opportunities at Greater Chicago-land's leading companies, good pay, and the opportunity to expand your knowledge and skills while keeping your career moving forward. Excellence is our minimum standard. If this sounds like the way you work and you are ready to learn more about how we can help your career, contact us today. Company Description You can be good at a lot of things. We prefer to be great at one thing. For us, that is staffing and recruiting. As a prospective Barton Staffing Solutions employee, we provide employment opportunities at Greater Chicago-land's leading companies, good pay, and the opportunity to expand your knowledge and skills while keeping your career moving forward. Excellence is our minimum standard. If this sounds like the way you work and you are ready to learn more about how we can help your career, contact us today.
U.S. Tsubaki Power Transmission, LLC
Sandusky, Ohio
Description: The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the "Best Value" supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Must be able to perform all assigned perform duties independently and with minimal supervision in a timely, proficient and well organized manner. Completes projects with minimal guidance demonstrating a proactive behavior to minimize equipment down time and lost production capability. Improves reliability and uptime of all equipment. Takes a proactive approach to equipment issues with a preventive maintenance approach. Troubleshoots electrical and mechanical devices in operation. Dismantles and examines equipment and components to gain access to and remove, repair and replace defective parts Sets up and operates shop machinery such as lathe, drill press, grinders, band saws, cutting torch, welder, etc. Must be proficient in PLC program writing, editing and ladder logic troubleshooting. Researches supplies, parts and tools needed for new installation or upgrades of electrical cabinets and related electrical components to include disconnects, PLCs, motor starters, contactors, timers, relays, fuse blocks and wire path ways. Installs new or repairs/modifies hydraulic and pneumatic valves, manifolds, solenoids and miscellaneous associated equipment as needed. Inspects circuits and wiring to ensure safety and security. Researches supplies, parts and tools needed to complete work orders. Assists in identifying and maintaining an accurate inventory of parts. Ability to fabricate using various welding techniques to include stick and MIG. Contributes to upkeep and updating of required paperwork such as records, maintenance logs, documents, manuals, drawings, PM logs, etc. Uses hand tools and pneumatic tools to modify or repair parts and equipment. Operates forklift and hydraulic working platforms as needed. Follows applicable Safety, Health and Environmental rules and guidelines while performing job duties. Attends a minimum of 40-hours annual company sponsored skill based training. Maintains departmental housekeeping. Other duties as assigned by supervision. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered 2-year Electrical Degree a plus Technical School Degree a plus 5+ years' experience in the following areas: process improvement; problem solving techniques; PLC troubleshooting and repair; Industrial electrical and mechanical repair; general industrial facility maintenance; and industrial operations Exhibits required in-depth job knowledge and skills Able to troubleshoot and solve problems and determine a course of action Fosters a team environment by the ability to influence others within the department Can prioritize the work and coordinate with other department Supervisors Supports complex customer needs/requests Exhibits a sense of urgency to get the job done U.S. Tsubaki offers: A competitive compensation package, including health benefits effective on date of hire, generous 401(k) match and profit sharing, education reimbursement, and annual bonus potential Paid vacation time 90-day and 180-day performance reviews Shift differential pay for 2nd and 3rd shift Weekly bonus potential Paid training Weekly pay Shift: 4 days a week, 10 hours per day. Days: Monday - Thursday (standard schedule). Overtime may be required on Fridays/Saturdays according to business needs. Learn more about U.S. Tsubaki at: The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI4685ce2699ad-0444
07/16/2026
Full time
Description: The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the "Best Value" supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Must be able to perform all assigned perform duties independently and with minimal supervision in a timely, proficient and well organized manner. Completes projects with minimal guidance demonstrating a proactive behavior to minimize equipment down time and lost production capability. Improves reliability and uptime of all equipment. Takes a proactive approach to equipment issues with a preventive maintenance approach. Troubleshoots electrical and mechanical devices in operation. Dismantles and examines equipment and components to gain access to and remove, repair and replace defective parts Sets up and operates shop machinery such as lathe, drill press, grinders, band saws, cutting torch, welder, etc. Must be proficient in PLC program writing, editing and ladder logic troubleshooting. Researches supplies, parts and tools needed for new installation or upgrades of electrical cabinets and related electrical components to include disconnects, PLCs, motor starters, contactors, timers, relays, fuse blocks and wire path ways. Installs new or repairs/modifies hydraulic and pneumatic valves, manifolds, solenoids and miscellaneous associated equipment as needed. Inspects circuits and wiring to ensure safety and security. Researches supplies, parts and tools needed to complete work orders. Assists in identifying and maintaining an accurate inventory of parts. Ability to fabricate using various welding techniques to include stick and MIG. Contributes to upkeep and updating of required paperwork such as records, maintenance logs, documents, manuals, drawings, PM logs, etc. Uses hand tools and pneumatic tools to modify or repair parts and equipment. Operates forklift and hydraulic working platforms as needed. Follows applicable Safety, Health and Environmental rules and guidelines while performing job duties. Attends a minimum of 40-hours annual company sponsored skill based training. Maintains departmental housekeeping. Other duties as assigned by supervision. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered 2-year Electrical Degree a plus Technical School Degree a plus 5+ years' experience in the following areas: process improvement; problem solving techniques; PLC troubleshooting and repair; Industrial electrical and mechanical repair; general industrial facility maintenance; and industrial operations Exhibits required in-depth job knowledge and skills Able to troubleshoot and solve problems and determine a course of action Fosters a team environment by the ability to influence others within the department Can prioritize the work and coordinate with other department Supervisors Supports complex customer needs/requests Exhibits a sense of urgency to get the job done U.S. Tsubaki offers: A competitive compensation package, including health benefits effective on date of hire, generous 401(k) match and profit sharing, education reimbursement, and annual bonus potential Paid vacation time 90-day and 180-day performance reviews Shift differential pay for 2nd and 3rd shift Weekly bonus potential Paid training Weekly pay Shift: 4 days a week, 10 hours per day. Days: Monday - Thursday (standard schedule). Overtime may be required on Fridays/Saturdays according to business needs. Learn more about U.S. Tsubaki at: The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI4685ce2699ad-0444
CNC Machinists 1st & 2nd Shifts Generous Shift Differential on 2nd Shift Hi-Tek Manufacturing is searching for experienced CNC Machinists who wish to develop his or her career in advanced manufacturing technology by executing a higher level of workmanship. Overview: Hi-Tek is currently hiring for multiple departments: • Mills • Lathe/Turn • Grinding (Creep Feed, Huffman, Campbell) Reporting to the Manufacturing Supervisor, the machinist will be responsible for following all policies and procedures associated with the various parts and equipment that he or she will be trained and certified to run. You will be expected to set up and operates computer numerical control (CNC) machinery, including 3, 4, and 5 axis Milling machines, VTL's, horizontal Lathes / Turn, Creep Feed and 5 axis Grinder machining centers to perform functions such as boring, facing, and threading parts of metallic workpieces such as castings, forgings and bar stock. You will follow process sheets, work instructions, and blueprints to complete your tasks with quality and safety as your focus. Essential tasks and functions • Set-up and operate a variety of CNC machines including 3,4, and 5 axis Milling machines, VTL's, horizontal Lathes / Turn, Creep Feed and 5 axis Grinders • Upload/download and edit CNC programs as required • Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications • Operate CNC machines including 3,4, and 5 axis milling machines, VTL's, horizontal lathes, creep feed and 5 axis grinders to produce the required number of correct parts in a timely manner according to process documentation. This can include operating multiple pieces of equipment simultaneously. • Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary (micrometers, calipers, gauges (pin, thread, indicator, height), optical comparators and coordinate measuring machines (CMM). • Maintain working knowledge of CNC principles, including G and M codes • Selects, aligns, and secures fixtures, tooling, and workpieces on machines as necessary to machine parts as required • Maintains specifications; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. • Analyze, interpret CMM reports, adjust machine offsets to meet customer specifications • Perform first piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to process documentation • Perform Deburr or rework of work in-process to within specified tolerances • Operate overhead crane when necessary • Documents actions by updating control charts, travelers, and reporting labor in the ERP system • Perform under AS9100 quality standards and NADCAP accreditation • Maintain a safe and clean work environment by performing daily housekeeping duties • Any other duties needed to help drive our vision, fulfill our mission, and abide by our organization's values • Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment • Effective communication and people skills to maintain a working relationship with Quality, Engineering, and Management • Follow all Hi-Tek policies and procedures, including the use of proper PPE Education and Experience • High school diploma or GED required • CNC Machining certificate from a Trade School preferred or acceptable work experience in lieu of schooling Must meet the definition of a "U.S. person" under ITAR, as set forth in 22 C.F.R. 120.62. • Knowledge of Fanuc, Mitsubishi, Okuma controls as plus • Experience with G & M codes preferred • Good technical math skills (shop math, geometry, and trigonometry) • Experience in an industrial/manufacturing environment, aerospace industry preferred • Troubleshooting / Critical thinking skills Key Competencies • The ability to work efficiently with others or independently as required • Integrity and conscientiousness in all work-related matters • Safety conscious always • Reliable attendance within acceptable standards of attendance policy • Must be able to follow verbal and written instructions in English • Must be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels • Lift, push and/or pull up to thirty-five (35lbs.) pounds regularly • Operate overhead crane or other lifting equipment when necessary • Stand at least 95% of scheduled shift on raised platform • Walking or climbing stairs as needed to perform job duties as assigned • Routinely perform reaching, twisting, bending, lifting, and grasping • Frequently use gross and fine motor skills to manage various parts, tools, and tooling • Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with ability to pass annual vision test as required Shifts: 1st Shift: Monday-Friday, 7:00am-3:30pm 2nd Shift: Monday-Friday, 3:30pm-12:00am. 2nd Shift offers a Generous Shift Differential! Overtime may be required as needed This job description is a tool to be followed. Other job duties may be assigned to you, this outline is not to be considered a detail description, and you may have other duties assigned as needed. Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! CLEAN & CLIMATE CONTROLLED environment and we believe in quality and safety above all else. Hi-Tek is a Drug-Free Workplace and conducts pre-employment 10-panel drug and background screening and random 10-panel drug screening. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company. 1st shift is Mon-Fri, 7am-3:30pm. 2nd shift is Mon-Fri 3:30pm-12am. Overtime may be required as needed on either/both shifts. There is a generous shift differential on 2nd shift. Compensation details: 25-30 Hourly Wage PI0c8b36bd8b6b-0866
07/10/2026
Full time
CNC Machinists 1st & 2nd Shifts Generous Shift Differential on 2nd Shift Hi-Tek Manufacturing is searching for experienced CNC Machinists who wish to develop his or her career in advanced manufacturing technology by executing a higher level of workmanship. Overview: Hi-Tek is currently hiring for multiple departments: • Mills • Lathe/Turn • Grinding (Creep Feed, Huffman, Campbell) Reporting to the Manufacturing Supervisor, the machinist will be responsible for following all policies and procedures associated with the various parts and equipment that he or she will be trained and certified to run. You will be expected to set up and operates computer numerical control (CNC) machinery, including 3, 4, and 5 axis Milling machines, VTL's, horizontal Lathes / Turn, Creep Feed and 5 axis Grinder machining centers to perform functions such as boring, facing, and threading parts of metallic workpieces such as castings, forgings and bar stock. You will follow process sheets, work instructions, and blueprints to complete your tasks with quality and safety as your focus. Essential tasks and functions • Set-up and operate a variety of CNC machines including 3,4, and 5 axis Milling machines, VTL's, horizontal Lathes / Turn, Creep Feed and 5 axis Grinders • Upload/download and edit CNC programs as required • Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications • Operate CNC machines including 3,4, and 5 axis milling machines, VTL's, horizontal lathes, creep feed and 5 axis grinders to produce the required number of correct parts in a timely manner according to process documentation. This can include operating multiple pieces of equipment simultaneously. • Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary (micrometers, calipers, gauges (pin, thread, indicator, height), optical comparators and coordinate measuring machines (CMM). • Maintain working knowledge of CNC principles, including G and M codes • Selects, aligns, and secures fixtures, tooling, and workpieces on machines as necessary to machine parts as required • Maintains specifications; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. • Analyze, interpret CMM reports, adjust machine offsets to meet customer specifications • Perform first piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to process documentation • Perform Deburr or rework of work in-process to within specified tolerances • Operate overhead crane when necessary • Documents actions by updating control charts, travelers, and reporting labor in the ERP system • Perform under AS9100 quality standards and NADCAP accreditation • Maintain a safe and clean work environment by performing daily housekeeping duties • Any other duties needed to help drive our vision, fulfill our mission, and abide by our organization's values • Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment • Effective communication and people skills to maintain a working relationship with Quality, Engineering, and Management • Follow all Hi-Tek policies and procedures, including the use of proper PPE Education and Experience • High school diploma or GED required • CNC Machining certificate from a Trade School preferred or acceptable work experience in lieu of schooling Must meet the definition of a "U.S. person" under ITAR, as set forth in 22 C.F.R. 120.62. • Knowledge of Fanuc, Mitsubishi, Okuma controls as plus • Experience with G & M codes preferred • Good technical math skills (shop math, geometry, and trigonometry) • Experience in an industrial/manufacturing environment, aerospace industry preferred • Troubleshooting / Critical thinking skills Key Competencies • The ability to work efficiently with others or independently as required • Integrity and conscientiousness in all work-related matters • Safety conscious always • Reliable attendance within acceptable standards of attendance policy • Must be able to follow verbal and written instructions in English • Must be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels • Lift, push and/or pull up to thirty-five (35lbs.) pounds regularly • Operate overhead crane or other lifting equipment when necessary • Stand at least 95% of scheduled shift on raised platform • Walking or climbing stairs as needed to perform job duties as assigned • Routinely perform reaching, twisting, bending, lifting, and grasping • Frequently use gross and fine motor skills to manage various parts, tools, and tooling • Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with ability to pass annual vision test as required Shifts: 1st Shift: Monday-Friday, 7:00am-3:30pm 2nd Shift: Monday-Friday, 3:30pm-12:00am. 2nd Shift offers a Generous Shift Differential! Overtime may be required as needed This job description is a tool to be followed. Other job duties may be assigned to you, this outline is not to be considered a detail description, and you may have other duties assigned as needed. Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! CLEAN & CLIMATE CONTROLLED environment and we believe in quality and safety above all else. Hi-Tek is a Drug-Free Workplace and conducts pre-employment 10-panel drug and background screening and random 10-panel drug screening. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company. 1st shift is Mon-Fri, 7am-3:30pm. 2nd shift is Mon-Fri 3:30pm-12am. Overtime may be required as needed on either/both shifts. There is a generous shift differential on 2nd shift. Compensation details: 25-30 Hourly Wage PI0c8b36bd8b6b-0866