Description Summary: The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used. Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Job Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: PRN Work Type: Per Diem As Needed
11/22/2026
Full time
Description Summary: The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used. Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Job Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: PRN Work Type: Per Diem As Needed
SAFETY. TEAMWORK. CLARITY. BURNCO is looking to add skilled Diesel Mechanics to our Irving, Texas team . You're someone who drives change and takes pride in their high-quality workmanship and their ability to get things done effectively and timely. You do great work, you're a great team player and you're ready to earn some fantastic wages supporting one of the industry's top performers. Join a solid team building infrastructure that will be around for generations. What You Will Be Doing Install, maintain, and repair machinery, equipment, physical structures, plumbing and electrical systems following specifications, blue prints and manuals Perform daily visual inspections of machinery and equipment while diagnosing sounds to determine malfunctions Comply with BURNCO policies and local, state, and federal regulations including DOT and company driving requirements Communicate timely and effectively with Plant Coordinator and Production Supervisor to inform them about major mechanical problems Record service performance through data entry and maintain parts inventory Operate mobile equipment when required Perform daily preventative maintenance, record and inspection on service vehicle which includes fueling, cleaning, tire/light inspection, and fluid level maintenance Service pumps/motors Perform welding, repair and fabrication May make service calls to other BURNCO plants as needed Demonstrate good knowledge of lock out/tag out procedures Communicate with co-workers through direct hand signals and a two-way radio Assist in the training and orientation of co-workers as needed Perform general clean-up of work area and other duties as required What We Would Like From You Good working knowledge of mechanics as related to truck and general maintenance Ability to use power tools, welders, cutting torches/chains and various safety devices Demonstrated knowledge of proper mechanic/maintenance procedures such as lockout/tag outs and special work permits Must be proficient with computer and program systems Experience with Allison transmissions, Davie 4 and ESA software a plus Excellent verbal and written communication skills Ability to pass MVR (clean driving record) Commercial Driver's License with Class A or B Certification preferred Provide own personal tools up to Ability to work well with others in a team environment High School Diploma preferred 1 year of Truck Mechanic experience required Experience with concrete mixers and aggregate haul trucks preferred Must be able to diagnose engines, electrical systems, hydraulic systems, transmissions, suspensions and brakes What's In It For You In addition to competitive pay, we provide the following benefits: Excellent Benefits Program including: medical, dental, vision and employee assistance programs 4% Company Matching 401k Plan Paid Weekly Every Friday - Just Like Clockwork Holiday, Vacation, Bereavement, Jury Duty Pay - With No Waiting Periods! Voucher for safety boots and glasses each year! Since 1912, BURNCO has been supplying aggregate construction materials as a successful, family-run business based in Calgary. Over the last 110 years we have embraced innovative technology and new marketplaces while always maintaining the vision and values that were first introduced by our founder, James F. Burns. Today we continue our unwavering commitment to safety, our renewed focus on family leadership and our steady, dependable growth into the future. We look forward to having you join us on that journey. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
11/21/2026
Full time
SAFETY. TEAMWORK. CLARITY. BURNCO is looking to add skilled Diesel Mechanics to our Irving, Texas team . You're someone who drives change and takes pride in their high-quality workmanship and their ability to get things done effectively and timely. You do great work, you're a great team player and you're ready to earn some fantastic wages supporting one of the industry's top performers. Join a solid team building infrastructure that will be around for generations. What You Will Be Doing Install, maintain, and repair machinery, equipment, physical structures, plumbing and electrical systems following specifications, blue prints and manuals Perform daily visual inspections of machinery and equipment while diagnosing sounds to determine malfunctions Comply with BURNCO policies and local, state, and federal regulations including DOT and company driving requirements Communicate timely and effectively with Plant Coordinator and Production Supervisor to inform them about major mechanical problems Record service performance through data entry and maintain parts inventory Operate mobile equipment when required Perform daily preventative maintenance, record and inspection on service vehicle which includes fueling, cleaning, tire/light inspection, and fluid level maintenance Service pumps/motors Perform welding, repair and fabrication May make service calls to other BURNCO plants as needed Demonstrate good knowledge of lock out/tag out procedures Communicate with co-workers through direct hand signals and a two-way radio Assist in the training and orientation of co-workers as needed Perform general clean-up of work area and other duties as required What We Would Like From You Good working knowledge of mechanics as related to truck and general maintenance Ability to use power tools, welders, cutting torches/chains and various safety devices Demonstrated knowledge of proper mechanic/maintenance procedures such as lockout/tag outs and special work permits Must be proficient with computer and program systems Experience with Allison transmissions, Davie 4 and ESA software a plus Excellent verbal and written communication skills Ability to pass MVR (clean driving record) Commercial Driver's License with Class A or B Certification preferred Provide own personal tools up to Ability to work well with others in a team environment High School Diploma preferred 1 year of Truck Mechanic experience required Experience with concrete mixers and aggregate haul trucks preferred Must be able to diagnose engines, electrical systems, hydraulic systems, transmissions, suspensions and brakes What's In It For You In addition to competitive pay, we provide the following benefits: Excellent Benefits Program including: medical, dental, vision and employee assistance programs 4% Company Matching 401k Plan Paid Weekly Every Friday - Just Like Clockwork Holiday, Vacation, Bereavement, Jury Duty Pay - With No Waiting Periods! Voucher for safety boots and glasses each year! Since 1912, BURNCO has been supplying aggregate construction materials as a successful, family-run business based in Calgary. Over the last 110 years we have embraced innovative technology and new marketplaces while always maintaining the vision and values that were first introduced by our founder, James F. Burns. Today we continue our unwavering commitment to safety, our renewed focus on family leadership and our steady, dependable growth into the future. We look forward to having you join us on that journey. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
SAFETY. TEAMWORK. CLARITY. BURNCO is looking to add skilled Diesel Mechanics to our Justin, Texas team . You're someone who drives change and takes pride in their high-quality workmanship and their ability to get things done effectively and timely. You do great work, you're a great team player and you're ready to earn some fantastic wages supporting one of the industry's top performers. Join a solid team building infrastructure that will be around for generations. What You Will Be Doing Install, maintain, and repair machinery, equipment, physical structures, plumbing and electrical systems following specifications, blue prints and manuals Perform daily visual inspections of machinery and equipment while diagnosing sounds to determine malfunctions Comply with BURNCO policies and local, state, and federal regulations including DOT and company driving requirements Communicate timely and effectively with Plant Coordinator and Production Supervisor to inform them about major mechanical problems Record service performance through data entry and maintain parts inventory Operate mobile equipment when required Perform daily preventative maintenance, record and inspection on service vehicle which includes fueling, cleaning, tire/light inspection, and fluid level maintenance Service pumps/motors Perform welding, repair and fabrication May make service calls to other BURNCO plants as needed Demonstrate good knowledge of lock out/tag out procedures Communicate with co-workers through direct hand signals and a two-way radio Assist in the training and orientation of co-workers as needed Perform general clean-up of work area and other duties as required What We Would Like From You Good working knowledge of mechanics as related to truck and general maintenance Ability to use power tools, welders, cutting torches/chains and various safety devices Demonstrated knowledge of proper mechanic/maintenance procedures such as lockout/tag outs and special work permits Must be proficient with computer and program systems Experience with Allison transmissions, Davie 4 and ESA software a plus Excellent verbal and written communication skills Ability to pass MVR (clean driving record) Commercial Driver's License with Class A or B Certification preferred Provide own personal tools up to Ability to work well with others in a team environment High School Diploma preferred 1 year of Truck Mechanic experience required Experience with concrete mixers and aggregate haul trucks preferred Must be able to diagnose engines, electrical systems, hydraulic systems, transmissions, suspensions and brakes What's In It For You In addition to competitive pay, we provide the following benefits: Excellent Benefits Program including: medical, dental, vision and employee assistance programs 4% Company Matching 401k Plan Paid Weekly Every Friday - Just Like Clockwork Holiday, Vacation, Bereavement, Jury Duty Pay - With No Waiting Periods! Voucher for safety boots and glasses each year! Since 1912, BURNCO has been supplying aggregate construction materials as a successful, family-run business based in Calgary. Over the last 110 years we have embraced innovative technology and new marketplaces while always maintaining the vision and values that were first introduced by our founder, James F. Burns. Today we continue our unwavering commitment to safety, our renewed focus on family leadership and our steady, dependable growth into the future. We look forward to having you join us on that journey. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
11/21/2026
Full time
SAFETY. TEAMWORK. CLARITY. BURNCO is looking to add skilled Diesel Mechanics to our Justin, Texas team . You're someone who drives change and takes pride in their high-quality workmanship and their ability to get things done effectively and timely. You do great work, you're a great team player and you're ready to earn some fantastic wages supporting one of the industry's top performers. Join a solid team building infrastructure that will be around for generations. What You Will Be Doing Install, maintain, and repair machinery, equipment, physical structures, plumbing and electrical systems following specifications, blue prints and manuals Perform daily visual inspections of machinery and equipment while diagnosing sounds to determine malfunctions Comply with BURNCO policies and local, state, and federal regulations including DOT and company driving requirements Communicate timely and effectively with Plant Coordinator and Production Supervisor to inform them about major mechanical problems Record service performance through data entry and maintain parts inventory Operate mobile equipment when required Perform daily preventative maintenance, record and inspection on service vehicle which includes fueling, cleaning, tire/light inspection, and fluid level maintenance Service pumps/motors Perform welding, repair and fabrication May make service calls to other BURNCO plants as needed Demonstrate good knowledge of lock out/tag out procedures Communicate with co-workers through direct hand signals and a two-way radio Assist in the training and orientation of co-workers as needed Perform general clean-up of work area and other duties as required What We Would Like From You Good working knowledge of mechanics as related to truck and general maintenance Ability to use power tools, welders, cutting torches/chains and various safety devices Demonstrated knowledge of proper mechanic/maintenance procedures such as lockout/tag outs and special work permits Must be proficient with computer and program systems Experience with Allison transmissions, Davie 4 and ESA software a plus Excellent verbal and written communication skills Ability to pass MVR (clean driving record) Commercial Driver's License with Class A or B Certification preferred Provide own personal tools up to Ability to work well with others in a team environment High School Diploma preferred 1 year of Truck Mechanic experience required Experience with concrete mixers and aggregate haul trucks preferred Must be able to diagnose engines, electrical systems, hydraulic systems, transmissions, suspensions and brakes What's In It For You In addition to competitive pay, we provide the following benefits: Excellent Benefits Program including: medical, dental, vision and employee assistance programs 4% Company Matching 401k Plan Paid Weekly Every Friday - Just Like Clockwork Holiday, Vacation, Bereavement, Jury Duty Pay - With No Waiting Periods! Voucher for safety boots and glasses each year! Since 1912, BURNCO has been supplying aggregate construction materials as a successful, family-run business based in Calgary. Over the last 110 years we have embraced innovative technology and new marketplaces while always maintaining the vision and values that were first introduced by our founder, James F. Burns. Today we continue our unwavering commitment to safety, our renewed focus on family leadership and our steady, dependable growth into the future. We look forward to having you join us on that journey. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Description Summary: The Catheterization Laboratory Technician I supports diagnostic, interventional cardiac catheterization, and EP procedures by preparing the lab, equipment, and supplies. This role involves assisting the medical team during procedures, ensuring accurate patient documentation, and maintaining sterile technique. The technician operates and troubleshoots specialized cath lab equipment, prioritizing patient safety and efficient departmental operations. They also contribute to a collaborative environment by sharing knowledge and adhering to organizational principles and safety standards. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: imaging (intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used but is not licensed to administer fluoro imaging. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Job Requirements: Education/Skills Associate's degree in cardiovascular technology, radiologic technology, or a healthcare-related field preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred: Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: 5 Days - 8 Hours Work Type: Full Time
11/19/2026
Full time
Description Summary: The Catheterization Laboratory Technician I supports diagnostic, interventional cardiac catheterization, and EP procedures by preparing the lab, equipment, and supplies. This role involves assisting the medical team during procedures, ensuring accurate patient documentation, and maintaining sterile technique. The technician operates and troubleshoots specialized cath lab equipment, prioritizing patient safety and efficient departmental operations. They also contribute to a collaborative environment by sharing knowledge and adhering to organizational principles and safety standards. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: imaging (intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used but is not licensed to administer fluoro imaging. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Job Requirements: Education/Skills Associate's degree in cardiovascular technology, radiologic technology, or a healthcare-related field preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred: Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: 5 Days - 8 Hours Work Type: Full Time
Description Summary: The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used. Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Job Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: MULTIPLE SHIFTS AVAILABLE Work Type: Full Time
11/19/2026
Full time
Description Summary: The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used. Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Job Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: MULTIPLE SHIFTS AVAILABLE Work Type: Full Time
Description Summary: The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used. Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) BY CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: PRN Work Type: Per Diem As Needed
11/19/2026
Full time
Description Summary: The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used. Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) BY CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: PRN Work Type: Per Diem As Needed
Description Summary: The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used. Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Job Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: 4 Days - 10 Hours Work Type: Full Time
11/19/2026
Full time
Description Summary: The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. Participates in daily room checks and stocking of supplies. Accesses daily patient schedule and appropriate patient information for assigned procedures. Ensures appropriate equipment, supplies, and room configuration for all procedures. Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. Ensures proper patient information is entered into cath lab computer and imaging systems. Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. Ensures patient position is appropriate and safely secured on procedure table per procedure type. Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. Supports department and team by engaging in patient transport as appropriate. Obtains and maintains proficiency in access site management. Acts as radiation safety representative for patients and team while X-Ray is used. Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. Adheres to the attendance policy and departmental productivity standards. Supports department and organization's commitment to Zero Harm and Customer Service. Adheres to departmental and organizational dress code. Understands and upholds the CHRISTUS mission, vision, and purpose. Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Job Requirements: Education/Skills Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required Bachelor's degree preferred Experience 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications Basic Life Support (BLS) certification is required Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): Registered Cardiovascular Invasive Specialist (RCIS) by CCI Registered Cardiac Electrophysiology Specialist (RCES) by CCI Registered Cardiac Sonographer (RCS) by CCI Radiography (R) by ARRT Cardiac Interventional Radiography (CI) by ARRT Cardiovascular Interventional Radiography (CV) by ARRT Vascular Interventional Radiography (VI) by ARRT Abdomen (AB) RDMS by ARDMS Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS Adult Echocardiography (AE) RDCS by ARDMS Registered Vascular Technologist (RVT) by ARDMS State Licensure required based on modality Texas: MRT or LMRT by TMB Louisiana: LRT (R) or (F) by LSRTBE New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: 4 Days - 10 Hours Work Type: Full Time
Sanitation District 1 Of Northern Kentucky
Petersburg, Kentucky
Job Description Job Description Sanitation District No. 1 Plant Maintenance Department: 100, 800, 900 Reports To: Manit. Coordinator (100), Plant Manager (800 &900) FLSA Status: Non-Exempt Pay Grade: 18 Prepared Date: 6/8/2026 Summary: The Western Regional WRF Plant Maintenance Technician should be capable of working independently and display sound level of experience, professionalism, and mechanical talent. Technicians must be able to assist in maintaining the operational efficiency and capacity of the Plant by ensuring that all equipment and processes work as designed. Technicians will also be expected to work overtime as needed to assure the Plant always operates properly. EssentialDuties and Responsibilities: (Other duties may be assigned.) • Complete assigned work orders and inspect completed jobs for neatness and quality. This will also involve troubleshooting equipment issues and providing resolution with minimum disruption to the treatment process. • Complete preventative maintenance on all plant equipment to include Electrical and HVAC equipment. • Work may be conducted in permit required confined spaces and areas with limited access and visibility. • Work may be required with or around energized components. An understanding of basic electricity is expected. • Inspect and repair or replace various electrical components and HVAC systems. • Participatein safety classes as scheduled. Encourage and provide an accident-free work environment. • Assure that all assigned SD1 equipment, tools and vehicles are used and operated in accordance with the SD1's safety procedures and they are properly cared for and maintained. • Analyzing and resolving equipment issues in a timely and cost-effective manner. • Be able to multi-task and balance various work loads occurring simultaneously. • Workday involve fabrication for equipment or building and grounds. Competencies: Core Competencies (10): Accountability Collaboration Environmental Stewardship Integrity Safety Customer Focus Functional Competencies (4): Job Knowledge and Performance Organization& Time Management Teamwork& Cooperation Responsibility& Accountability Qualifications : Education/Experience/Licensing: High School Diploma Must have a valid driver's license. Knowledge, Skills, and Abilities: A high degree of initiative and good interpersonal skills. A good knowledge of 3 phase electric and motor controls or the ability to learn. Candidate must demonstrate entry level electrician technician / HVAC technician experience. Ability to do general welding or the ability to learn. Must be confined space qualified. Must possess a firm understanding of SD1 Lock Out/Tag Out protocols Technology Requirements o Proficient with Windows based desktop computers o Embraces mobile data collection and data analysis. o Strong use of Microsoft Office products o Strong use of Google Apps Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Items Used % of time used Handheld tools (hammers, shovels, sledgehammer, etc.) 75% Equipment (quickie saw, drills, jackhammer, etc.) 25% Heavy equipment (backhoes, skid steers, etc.) 15% Machinery (pumps, motors, mounted saws, etc.) 20% Computer or Laptop 15% Please list the items that are used in this position and the associated % of time: Positions % of time in position Up to how much weight Standing 35% Walking 40% Lifting or moving 20% 50 lbs. Climbing or balancing 35% Pulling 15% 50 lbs. Pushing 15% 50 lbs. Cramped or confined spaces 25% Sitting 5% Stoop, kneel, crouch, or crawl 40% Other positions and the associated % of time: Work Environment and Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Exposure to conditions % of time exposed Dirt/Mud 35% Significant heat 10% Significant cold 10% Smoke or fumes 10% Harmful chemicals 15% Water or wastewater 35% Moderate or louder noise 10% Vibration 2% Grease or oil 40% Electric shock risk 35% Dust/Shavings 45% Office Environment 5% Please Note : Candidate must have the ability to wear required respiratory protection devices (self-contained breathing apparatus - S.C.B.A) in accordance with District policy, including not having facial hair that interferes with the face piece-to-face seal. DISCLAIMER : The information outlined in this job description indicates the general nature and type of work performed by employees within this classification. It is not intended to provide a comprehensive inventory of all duties, responsibilities or competencies required of employees within this classification. (4) 10-hr shifts
11/18/2026
Full time
Job Description Job Description Sanitation District No. 1 Plant Maintenance Department: 100, 800, 900 Reports To: Manit. Coordinator (100), Plant Manager (800 &900) FLSA Status: Non-Exempt Pay Grade: 18 Prepared Date: 6/8/2026 Summary: The Western Regional WRF Plant Maintenance Technician should be capable of working independently and display sound level of experience, professionalism, and mechanical talent. Technicians must be able to assist in maintaining the operational efficiency and capacity of the Plant by ensuring that all equipment and processes work as designed. Technicians will also be expected to work overtime as needed to assure the Plant always operates properly. EssentialDuties and Responsibilities: (Other duties may be assigned.) • Complete assigned work orders and inspect completed jobs for neatness and quality. This will also involve troubleshooting equipment issues and providing resolution with minimum disruption to the treatment process. • Complete preventative maintenance on all plant equipment to include Electrical and HVAC equipment. • Work may be conducted in permit required confined spaces and areas with limited access and visibility. • Work may be required with or around energized components. An understanding of basic electricity is expected. • Inspect and repair or replace various electrical components and HVAC systems. • Participatein safety classes as scheduled. Encourage and provide an accident-free work environment. • Assure that all assigned SD1 equipment, tools and vehicles are used and operated in accordance with the SD1's safety procedures and they are properly cared for and maintained. • Analyzing and resolving equipment issues in a timely and cost-effective manner. • Be able to multi-task and balance various work loads occurring simultaneously. • Workday involve fabrication for equipment or building and grounds. Competencies: Core Competencies (10): Accountability Collaboration Environmental Stewardship Integrity Safety Customer Focus Functional Competencies (4): Job Knowledge and Performance Organization& Time Management Teamwork& Cooperation Responsibility& Accountability Qualifications : Education/Experience/Licensing: High School Diploma Must have a valid driver's license. Knowledge, Skills, and Abilities: A high degree of initiative and good interpersonal skills. A good knowledge of 3 phase electric and motor controls or the ability to learn. Candidate must demonstrate entry level electrician technician / HVAC technician experience. Ability to do general welding or the ability to learn. Must be confined space qualified. Must possess a firm understanding of SD1 Lock Out/Tag Out protocols Technology Requirements o Proficient with Windows based desktop computers o Embraces mobile data collection and data analysis. o Strong use of Microsoft Office products o Strong use of Google Apps Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Items Used % of time used Handheld tools (hammers, shovels, sledgehammer, etc.) 75% Equipment (quickie saw, drills, jackhammer, etc.) 25% Heavy equipment (backhoes, skid steers, etc.) 15% Machinery (pumps, motors, mounted saws, etc.) 20% Computer or Laptop 15% Please list the items that are used in this position and the associated % of time: Positions % of time in position Up to how much weight Standing 35% Walking 40% Lifting or moving 20% 50 lbs. Climbing or balancing 35% Pulling 15% 50 lbs. Pushing 15% 50 lbs. Cramped or confined spaces 25% Sitting 5% Stoop, kneel, crouch, or crawl 40% Other positions and the associated % of time: Work Environment and Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Exposure to conditions % of time exposed Dirt/Mud 35% Significant heat 10% Significant cold 10% Smoke or fumes 10% Harmful chemicals 15% Water or wastewater 35% Moderate or louder noise 10% Vibration 2% Grease or oil 40% Electric shock risk 35% Dust/Shavings 45% Office Environment 5% Please Note : Candidate must have the ability to wear required respiratory protection devices (self-contained breathing apparatus - S.C.B.A) in accordance with District policy, including not having facial hair that interferes with the face piece-to-face seal. DISCLAIMER : The information outlined in this job description indicates the general nature and type of work performed by employees within this classification. It is not intended to provide a comprehensive inventory of all duties, responsibilities or competencies required of employees within this classification. (4) 10-hr shifts