536 jobs found

Overview: The Foods Warehouse position is physically demanding; manual labor is required. The Foods Support team is responsible for providing support to the Food Service department through ice production and delivery, beverage machine maintenance and novelty food storage and delivery. This position requires a valid drivers license and you must be 18 years of age or older. Certain shifts begin as early as 6 am or go until 1 hour prior to park closing Foods Support Associates are required to interact with guests, other Associates, leads, and supervisors on a daily basis. Additionally, Foods Support Associatess are required to continuously work outdoors and closely with others. Support staff will be required to work in the park when needed and must pass all Associates and cash handling trainings. Occasionally will work alone. Will always be exposed to direct sunlight, dust, dirt, and water. Must be able to function in all weather conditions for long periods of time. Foods Ice House/Support Host/Hostess must be willing to help in the park when needed. This may include but is not limited to, food safety, cash handling, interacting with guests, and providing excellent service. Pay Rate: $16.50/Hour Responsibilities: Must be able to promote the park with the utmost enthusiasm and pride while providing support to the Foods Department through ice production and delivery. Maintain the production of ice and delivery to food stands throughout the park. Delivery of ice via the use of park vehicles, hand trucks and manually. Bagging and lifting ice and operating lift equipment. Maintain a safe and clean work area. Maintain proper attendance and timelines. Required to attend work in full grooming guidelines. Required to stay in uniform w/ the exception of when in the support area. Ensure guest safety and satisfaction in their stay at Six Flags. Resolve Guest concerns that may arise on a daily basis. Ensure standards of performance for all areas within their responsibilities are met. Respond to any emergency situation in the area and maintain control until an area supervisor arrives. Ensure that image, cleanliness and courtesy standards requirements are met. Refrain from consuming any substance that may impair judgment. Cooperate with all Associatess and managers. Answer guest questions and give proper guidance. Complete any and all tasks as requested by Six Flags Management. Respond to emergencies with appropriate action, maintain control and notify supervisor. Qualifications: At least 18 years of age. Must posses a valid driver's license to drive park vehicles. Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language. Available to work flexible hours at nights, weekends and holidays. Must have good customer service skills. Requires continuous sitting or standing, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using a telephone. Must be able to read and write English. Requires some lifting, sitting, standing, walking, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using telephone. Must be able to read and write English. Must be able to stand/walk for up to 6 hours at a time and as many as 14 hours a day. Must be able to walk up to 3 miles per day over various surfaces. Must be able to lift 50 lbs consistently. Must be able to lift and carry 50 lbs over 25 feet over various surfaces. Must be able to lift and lower 50 lbs above shoulder level. Must be able to climb a stepladder up to 6 ft. in height. Note: This job description is not intended to be all inclusive. Associates may perform other related duties as required, meeting the on-going needs of the company. Six Flags Entertainment Corporation is North America's largest regional amusement-resort operator with 27 amusement parks, 15 water parks and nine resort properties across 17 states in the U.S., Canada and Mexico. Focused on its purpose of making people happy, Six Flags provides fun, immersive and memorable experiences to millions of guests every year with world-class coasters, themed rides, thrilling water parks, resorts and a portfolio of beloved intellectual property such as Looney Tunes , DC Comics and PEANUTS . What's in it for you? Free Food for Memorial Day, Fourth of July and Labor Day Exclusive Rides parties for all employees. Scholarship Opportunities Professional Development Complimentary tickets In-Park discounts and more! Other Functions: All other duties assigned or necessary to support the park as a whole. While this job description is intended to be an accurate reflection of the requirements of the job, management reserves the right to add or remove duties when circumstances (e.g., emergencies, changes in workload, rush jobs, or technological developments) dictate. Six Flags is an Equal Opportunity Employer and supports a Drug Free Work Place.

Overview: The Foods Warehouse position is physically demanding; manual labor is required. The Foods Support team is responsible for providing support to the Food Service department through ice production and delivery, beverage machine maintenance and novelty food storage and delivery. This position requires a valid drivers license and you must be 18 years of age or older. Certain shifts begin as early as 6 am or go until 1 hour prior to park closing Foods Support Associates are required to interact with guests, other Associates, leads, and supervisors on a daily basis. Additionally, Foods Support Associatess are required to continuously work outdoors and closely with others. Support staff will be required to work in the park when needed and must pass all Associates and cash handling trainings. Occasionally will work alone. Will always be exposed to direct sunlight, dust, dirt, and water. Must be able to function in all weather conditions for long periods of time. Foods Ice House/Support Host/Hostess must be willing to help in the park when needed. This may include but is not limited to, food safety, cash handling, interacting with guests, and providing excellent service. Pay Rate: $16.50/Hour Responsibilities: Must be able to promote the park with the utmost enthusiasm and pride while providing support to the Foods Department through ice production and delivery. Maintain the production of ice and delivery to food stands throughout the park. Delivery of ice via the use of park vehicles, hand trucks and manually. Bagging and lifting ice and operating lift equipment. Maintain a safe and clean work area. Maintain proper attendance and timelines. Required to attend work in full grooming guidelines. Required to stay in uniform w/ the exception of when in the support area. Ensure guest safety and satisfaction in their stay at Six Flags. Resolve Guest concerns that may arise on a daily basis. Ensure standards of performance for all areas within their responsibilities are met. Respond to any emergency situation in the area and maintain control until an area supervisor arrives. Ensure that image, cleanliness and courtesy standards requirements are met. Refrain from consuming any substance that may impair judgment. Cooperate with all Associatess and managers. Answer guest questions and give proper guidance. Complete any and all tasks as requested by Six Flags Management. Respond to emergencies with appropriate action, maintain control and notify supervisor. Qualifications: At least 18 years of age. Must posses a valid driver's license to drive park vehicles. Able to communicate effectively in the English language, including the ability to read, speak, and understand the English language. Available to work flexible hours at nights, weekends and holidays. Must have good customer service skills. Requires continuous sitting or standing, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using a telephone. Must be able to read and write English. Requires some lifting, sitting, standing, walking, bending, eye/hand coordination, near vision, hearing, and speech. Requires frequent kneeling, manual dexterity, gross motor skills, and color definition. Requires using telephone. Must be able to read and write English. Must be able to stand/walk for up to 6 hours at a time and as many as 14 hours a day. Must be able to walk up to 3 miles per day over various surfaces. Must be able to lift 50 lbs consistently. Must be able to lift and carry 50 lbs over 25 feet over various surfaces. Must be able to lift and lower 50 lbs above shoulder level. Must be able to climb a stepladder up to 6 ft. in height. Note: This job description is not intended to be all inclusive. Associates may perform other related duties as required, meeting the on-going needs of the company. Six Flags Entertainment Corporation is North America's largest regional amusement-resort operator with 27 amusement parks, 15 water parks and nine resort properties across 17 states in the U.S., Canada and Mexico. Focused on its purpose of making people happy, Six Flags provides fun, immersive and memorable experiences to millions of guests every year with world-class coasters, themed rides, thrilling water parks, resorts and a portfolio of beloved intellectual property such as Looney Tunes , DC Comics and PEANUTS . What's in it for you? Free Food for Memorial Day, Fourth of July and Labor Day Exclusive Rides parties for all employees. Scholarship Opportunities Professional Development Complimentary tickets In-Park discounts and more! Other Functions: All other duties assigned or necessary to support the park as a whole. While this job description is intended to be an accurate reflection of the requirements of the job, management reserves the right to add or remove duties when circumstances (e.g., emergencies, changes in workload, rush jobs, or technological developments) dictate. Six Flags is an Equal Opportunity Employer and supports a Drug Free Work Place.

Hello! Florida Destination Management, Inc. Events & Programs PROGRAM DESIGN ASSOCIATE We are a National Destination Management company with over 13 offices nationwide and over 250 Team Members and growing. We are the collaborators, event planners, logistics coordinators, innovators, creators, and dreamers who do what we love with a passion to please. We have over 57 industry awards as a demonstration of our commitment to excellence. Come be part of this award-winning team! OPTIMAL CANDIDATE As Program Design Associate, you will play a strategic role on a strong team as it continually strives to over-deliver clients' expectations. Hello! Destination Management specializes in Destination Management Services as well as the design and production of special events. We are looking for a career-minded individual who thrives in a fast-paced, high-energy work environment where excellence is the norm. The successful team player will be innovative and able to apply creative solutions to client proposal requests. They will possess 1 year of hospitality experience. JOB DESCRIPTION: The Program Design Associate is a deadline driven position that requires critical thinking and basic knowledge of event planning, food and beverage logistics, and entertainment and design. This position requires attention to detail, organization, precise oral and written communication, multi-tasking, meeting deadlines, cooperation, teamwork, creativity, ability to work independently as well as collaboratively with co-workers, a polished demeanor and resourcefulness. Position requires the ability to design and create DMC experiences and proposal writing. WORK HOURS: This is an hourly position, Monday through Friday, with a minimum requirement of 40 hours a week. Based on client requests and projects, some nights and weekends may be required. EXPERIENCE: 1 year minimum SKILLS/QUALIFICATIONS: DMC knowledge Creative writing skills Intermediate experience with Microsoft Office applications Ability to manage multiple projects. Strong organization and time management skills Responsibilities Include the Following: Manage assigned projects from proposal design through program contracting. Develop and maintain strong supplier relationships. Attending supplier site inspections. Research supplier availability and manage negotiations to ensure optimal cost advantage throughout program contracting. Create new and innovative DMC experiences. COMPENSATION: This is an hourly position. The company provides a laptop, mileage reimbursement, technology reimbursement, health benefits, and a 401K program. Equal Opportunity Employer (EEO) Statement Hello! Destination Management is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, marital status, sexual orientation, gender identity, veteran status, or any other protected characteristic in accordance with applicable federal, state, and local laws. ADA Essential Functions Statement The tasks listed above represent the essential functions of the position. Additional duties may be assigned as needed. Candidates must be able to perform these essential functions with or without reasonable accommodation. Physical & Environmental Requirements This position requires the ability to remain in a stationary position, move about the workplace, and operate standard office equipment. Physical requirements are described using ADA-compliant, non-exclusionary language. Reasonable Accommodation Statement We are committed to providing reasonable accommodations to individuals with disabilities to enable successful performance of essential job functions. If you need accommodation during the application or employment process, please notify Human Resources. Pay Transparency Notice Where required by applicable law, we disclose a good faith compensation range that reflects what we reasonably expect to pay at the time of hire for this role. The actual offer may vary based on factors such as job-related skills, experience, education, certifications, and market conditions. For locations without a pay range disclosure requirement, candidates may still request the pay scale for this role during the process. We do not request or rely on salary history where prohibited by law. At-will Employment As an employee of Hello! Destination Management, your employment has been and continues to be "at-will." This means that during the course of employment with the Company, employees are free to terminate their employment with the Company at any time, with or without a reason, and the Company has the right to terminate employees at any time, with or without a reason. Although the Company may choose to terminate an employee for cause, cause is not required. No one other than the President of the Company has the authority to alter this at-will employment arrangement, to enter into an agreement for employment for a specified period of time, or to make any agreement contrary to this at-will arrangement. Furthermore, any such agreement must be in writing and must be signed by the President of the Company. Job Description Disclaimer This job description is not a comprehensive listing of duties and responsibilities. Duties, responsibilities, and activities may change at any time with or without notice to meet evolving business needs. PI2cc8c48644ab-8739

Overview : At TDS Telecom, connecting people is at the heart of everything we do. We are forward thinkers who leverage cutting-edge fiber internet technology to strengthen communities. We are dedicated to excellence, which drives us to succeed together, creating a better world through meaningful connections. Ready to make an impact? This position is full time, year round, and typically works close to home with only limited travel required for training. As a Senior Outside Plant Construction Technician in Madison, WI, you will oversee the construction and maintenance of PON/fiber network communications facilities in TDS Telecom serving areas. Performs advanced operation of construction equipment which includes, but is not limited to, trenchers, backhoes, end loaders, and plows. Manages the overall project while coordinating with internal and external resources. Ensures the entire team operates according to safety protocols. This role includes a $5,000 sign on bonus (payout terms apply) and may qualify for relocation assistance. Outside Plant Construction Technicians can also earn up to $75 per week in incentives when your team meets production targets. Training: As a Senior Outside Plant Construction Technician, you will have the opportunity to obtain a Class A CDL through our in-house training program. You will attend safety training at one of our new facilities where you will also be trained on Pole Climbing and Bucket Trucks. On-the-job training includes exposure to various construction equipment including Directional Drill Rigs, Mini Excavators, Trenchers, and Locators. Fiber optic training includes Fusion Splicing, Fault Detection, and exposure to OTDRs and other advanced testing equipment. This position may be eligible for relocation assistance. For further information, please contact the Talent Acquisition team. Responsibilities : Receives maps and staking sheets for the full construction project and ensures project is built, with limited guidance from supervisors. Communicates updates to the project team as required. Manages daily and weekly project work based on deadlines, material and equipment availability, weather, and other factors. Coordinates with supervisor to ensure continual supply of work and availability of materials. Drafts and submits redlines upon completion of project. Ensures locates are performed on time and prior to team and equipment arriving at the worksite. Regularly engages municipalities, utility companies, suppliers, contractors, and property owners in order to smoothly coordinate project tasks and avoid disputes. Reads construction plans and municipality permits, and determines approach for completing work. Maintains all project documentation and records costs of project materials and material transfers. Ensures DOT inspections are performed on equipment. Works with project managers to ensure projects remain on schedule and within budget. Performs general construction labor in various weather conditions while utilizing safety fundamentals. Advanced operation of trenchers, backhoes, end loaders, plows, and other excavating equipment to construct and maintain outside plant cable facilities. Advanced operation of all test equipment associated with outside plant facilities and construction duties. Installs, troubleshoots, tests, splices, repairs, and maintains fiber optic facilities. Identifies location of defective cable using various test equipment and repairs buried, aerial, underground, and/or customer cable. Locates cable and fiber in response to customer requests and/or construction needs. Performs cable fault acceptance tests on newly constructed facilities. Actively trains, monitors, and coaches team members while sharing construction knowledge and experience. Performs quality control inspections and makes training recommendations. Ensures safety protocols are enforced. Services, cleans, maintains, and repairs equipment. Completes all related paperwork in a timely manner. Provides assistance to field services technicians, as needed. The functions listed above are intended to describe the general nature and level of work being performed by associates assigned to this job. They are not intended to be an exhaustive list of all responsibilities; other duties may be assigned. Qualifications : Required Qualifications 2+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rock saw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge. 1+ years of experience leading construction projects as a crew foreperson or project manager. Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs. Must have and maintain a valid driver's license and remain eligible for DOT requirements. Other Qualifications Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire. Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull. Upon hire, must successfully pass all components of the Safety Training course curriculum. Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer. Preferred 2+ years' experience in the construction of fiber optic cable outside plant networks -OR- 2+ years installation of any underground or overhead utilities will be considered. Understanding of telecommunication products and services. Proven organizational skills and ability to multi-task. May require occasional travel. Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate. Must be able to operate vehicles with manual transmissions. Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what's listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today! Physical Demands and Work Environment While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk; and stoop, kneel, crouch or crawl. The employee must also be able to climb poles, ladders, towers or other structures. The employee is occasionally required to sit, reach with hands and arms, climb or balance, and taste or smell. The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to outside weather conditions and may have to work in attics and crawl spaces, or high-risk areas such as high voltage electrical, trenches, and manholes. The employee is frequently exposed to moving mechanical parts and heavy equipment; high, precarious places; fumes or airborne particles; and vibration. The employee is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is at times loud. Benefits We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority! Associates scheduled to work 20 or more hours per week have access to: Medical Coverage Dental Coverage Vision Coverage Life Insurance 401(k) Plan Generous Vacation & Paid Sick Leave Seven Paid National Holidays & One Floating Holiday Paid Parental Leave (6 weeks after 12 months of employment) Adoption & Surrogacy Assistance Employee Assistance & Wellness Programs Associates working 30 or more hours per week additionally have access to: Short-Term & Long-Term Disability TDS Service Discounts Education Assistance Paid Volunteer Time In addition to these benefits, all associates will have the opportunity to participate in our Associate Resource Groups, which are designed to encourage community and facilitate professional development. To learn more, click here . Who is TDS Telecom? TDS Telecom provides high-speed internet, TV entertainment, and phone services to a diverse range of communities, including small to mid-sized urban, suburban, and rural areas across the U.S . click apply for full job details

Overview : Ready to roll up your sleeves and bring cutting-edge fiber technology to life? As part of our Horizontal Directional Drilling Team, you'll be at the heart of building and maintaining our state-of-the-art PON/fiber network. If you have exeprience with horizontal directional drilling or locating for the drill, and want to be based close to home, this role is for you. This position is full time, year round, with a few weeks travel required for training. Pay Transparency The pay for this position ranges from $22.62 to $41.42 per hour. The listed pay range reflects the minimum and maximum base salary. Actual offers will be based on factors such as skills, qualifications, experience, location, and role-specific competencies. Some positions may also offer additional compensation, such as bonuses or equity awards. This role includes a $5,000 sign on bonus (payout terms apply) and may qualify for relocation assistance. Outside Plant Construction Technicians can also earn up to $75 per week in incentives when your team meets production targets. From installing buried and aerial fiber facilities to mastering construction equipment like trenchers, backhoes, end loaders, and plows, you'll make a real impact every day. You'll also install, test, troubleshoot, and repair fiber facilities to keep our customers connected. If you love working with your hands, being outdoors, and making a difference in your community, this is the role for you! What You'll Do: Operate horizontal directional drill or locate for the drill. Restore job sites and keep accurate project labels and markings. Support fiber splicing and repair activities. Climb poles, ladders, and structures; operate bucket trucks as needed. Install, maintain, test, and repair buried and aerial fiber lines. Operate construction equipment such as trenchers, plows, excavators, and locators. Set pedestals, vaults, handholes, and other outside plant infrastructure. Why You'll Love This Role: Flexible, full time year round schedule. Hands on, outdoor work building real infrastructure that matters. Work with a company that has 50+ years of telecom experience and a strong reputation for fiber innovation. Training: CDL training for qualified associates. Safety training, pole climbing, bucket truck operation. Fiber optic basics: fusion splicing, fault detection, OTDR. Construction equipment operation (drill rigs, trenchers, mini excavators). The duration of training varies based on the team assignment. Training for underground teams is 3 weeks, with an additional 1 week required for aerial training. Responsibilities : What We're Looking For: Self-Motivated: You're driven, ambitious, and always looking for ways to improve. Attention to Detail: You are committed to following safety protocols, and you take pride in precision, ensuring every measurement and assembly is accurate. Teamwork and Communication: You have strong communication skills and thrive in collaborative environments. What You'll Do: Conduct general construction tasks in various weather conditions, adhering to safety standards. Aids in transporting construction equipment to and from the worksite. Assists with and executes the installation of aerial and buried fiber based on maps, staking sheets, and locate markings. Operates hand tools, cable locators, and testing equipment as needed. Installs and sets enclosures, including buried and aerial vaults, pedestals, and handholes. Climbs poles, ladders, towers, and other structures as required, utilizing a bucket truck when necessary. Labels and marks fiber optic and copper facilities accurately. Utilizes dispatching applications and relevant tools for project coordination. Supports fiber splicing, repairs, and outside plant maintenance activities. Restores landscapes to original condition upon project completion. The functions listed above are intended to describe the general nature and level of work being performed by associates assigned to this job. They are not intended to be an exhaustive list of all responsibilities; other duties may be assigned. Qualifications : Required Qualifications 6+ months experience in any combination of the following areas: customer service, electrical or utility construction, -OR-technical certification (or higher) -OR- current military service, or prior military service with honorable discharge. Must follow the TDS attendance guidelines in order to meet TDS's business needs including but not limited to our obligations to our customers and to our customers' needs. Must have and maintain a valid driver's license and remain eligible for DOT requirements. Other Qualifications Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire. Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull. Upon hire, must successfully pass all components of the Safety Training course curriculum. Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer. Horizontal directional drilling experience preferred. Basic understanding of telecommunication products and services. Proven organizational skills and ability to multi-task. May require occasional travel. Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate. Must be able to operate vehicles with manual transmissions. Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what's listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today! Physical Demands and Work Environment This role involves frequent physical activity, including standing, walking, kneeling, climbing, and lifting up to 50 pounds regularly (occasionally over 100 pounds). Vision requirements include close, distance, color, and depth perception. Work conditions often include outdoor weather, attics, crawl spaces, and high-risk areas like high voltage zones, trenches, and manholes. Exposure to heavy equipment, fumes, vibration, extreme temperatures, and loud noise is common. Benefits We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority! Associates scheduled to work 20 or more hours per week have access to: Medical Coverage Dental Coverage Vision Coverage Life Insurance 401(k) Plan Generous Vacation & Paid Sick Leave Seven Paid National Holidays & One Floating Holiday Paid Parental Leave (6 weeks after 12 months of employment) Adoption & Surrogacy Assistance Employee Assistance & Wellness Programs Associates working 30 or more hours per week additionally have access to: Short-Term & Long-Term Disability TDS Service Discounts Education Assistance Paid Volunteer Time In addition to these benefits, all associates will have the opportunity to participate in our Associate Resource Groups, which are designed to encourage community and facilitate professional development. To learn more, click here . Who is TDS Telecom? TDS Telecom provides high-speed internet, TV entertainment, and phone services to a diverse range of communities, including small to mid-sized urban, suburban, and rural areas across the U.S. With over 50 years of experience, TDS is committed to building and expanding fiber optic networks that bring cutting-edge connectivity to neighborhoods nationwide. Serving over 1 million connections, our mission is to create a better world by delivering innovative communication solutions that enhance the way people live, work, and connect. Visit to learn more! At TDS, we are committed to Equal Employment Opportunity (EEO) and value the difference of backgrounds, experiences and perspectives in our workforce. We consider all qualified applicants without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other status protected by law. Pay Transparency The pay for this position ranges from $22.62 to $41.42 per hour. The listed pay range reflects the minimum and maximum base salary. Actual offers will be based on factors such as skills, qualifications, experience, location, and role-specific competencies . click apply for full job details

Anderson Dahlen Description: Gray's Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication - cutting, forming, machining, welding, finishing, and complex assemblies - backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions, including but not limited to skill sets, experience and training, certifications, as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $64,000-$95,000/annually. Our comprehensive health plan options, including medical, dental, and vision insurance, provide our team members with the tools they need for treatment, preventative care, exams, and prescriptions. ADI's life, disability, and supplemental insurance options provide peace of mind and support to rely on in challenging times. Our team members overseas are offered private health insurance, life insurance, and an employee assistance program (EAP). Requirements: Prepare accurate cost estimates for fabricated metal components and assemblies by gathering information, analyzing critical metrics, and performing risk assessments. This role requires fluency in manufacturing processes, strong knowledge of bills of material and routings for metal products, and experience with ERP estimating systems. The Estimator works closely with internal teams, vendors, and customers to support successful project execution. Bachelor's or Associate degree in Industrial Engineering, Mechanical Engineering, or a related field preferred; equivalent experience considered. Working knowledge to proficient GD&T. welding symbols, and AWS/ASME welding codes. Understand parts, projects, and customer requirements. Determine key variables for labor, material, and process costs. Research and analyze manufacturing methods, production times, and materials. Gather, review, and evaluate vendor and subcontractor quotes. Perform risk analysis and identify cost drivers. Create and submit accurate estimate reports or bids to project managers, sales teams, and customers. Build and maintain strong relationships with vendors, subcontractors, and suppliers. Read and interpret blueprints, schematics, and statements of work. Utilize ERP and other quoting systems to develop estimates. Apply basic mathematics and problem-solving skills to estimating activities. Communicate clearly through presentations and written documentation. Support continuous improvement efforts and process standardization. PHYSICAL REQUIREMENTS: The company fosters a manufacturing-type environment. This position will primarily involve operating a computer at a desk in an office environment. Lift/Carry- 0-10 lbs.- Occasionally 11-50 lbs.- Never 51-100 lbs.- Never Push/Pull- 0-25 lbs.- Occasionally 26-75 lbs.- Never 76-100 lbs.- Never Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER: Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. PIb6-

Position Title: Project Manager - Process Pipe Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. POSITION SUMMARY The Project Manager must work safely and productively on various sized Industrial project sites. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Project Manager position. All employees are expected to communicate, always build relationships with other team members, and use good judgment. The Project Manager is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned ESSENTIAL DUTIES • Inform construction administration of project management assignment. Ensure procurement and/or completion of the following: o Required Bonding o Required Insurance o Project Directions (Map) o Project Files o Viewpoint Job Template Setup o Business License Requirements • Upon assignment of project - schedule and attend pre-construction handoff meetings to receive project information. • Review building plans and specifications, estimate, estimating proposals, and client contract. • Analyze project risks • Develop overall plan to complete contracted work in conjunction with Superintendent • Gather and organize the following information for future use: o Contracted Scope of Work o Project Safety Concerns o Material Quantity Takeoffs o Design Deficiencies o Potential Design/Construction Changes o Potential Schedule and Cost Impacts • Coordinate assembly of project budget derived from Estimate. • Work with the Project Superintendent to prepare project schedule. • Coordinate preparation of Site Specific Safety Plan • Conduct project Kick Off meeting with WBC project team to discuss all Project needs. • Coordinate material vendor selection and buyout process. • Ensure that all required submittals are collected, reviewed for compliance with contract documents, and submitted to the client for review. • Ensure that all building materials, equipment, and supplies are available to the WBC Superintendent for the project. • Coordinate the provision of adequate craft-level employees necessary to complete the job effectively, efficiently, and safely. • Ensure that the project layout process is planned and conducted properly. Coordinate project needs with Superintendent and field engineering staff • Review all plan and scope of work changes and Facilitate the change order process. Work with Superintendent to ensure project milestones are met. • Monitor quality control. • Monitor construction progress and actual costs versus budget. Frequently review information with Superintendent. Monitor labor production rates for significant phase codes of work. In cooperation with Superintendent, continuously analyze, trouble shoot, and attempt to improve construction processes. • Ensure that all work is performed in strict compliance with WBC Safety Manual, Site Specific Safety Plan, OSHA requirements, and Client requirements. • Assist WBC Superintendent(s) with troubleshooting and solving any special problems as they arise on the job site. • Review all material, service, and equipment invoices associated with assigned projects for correctness. • Review project timesheets and production reports weekly or more often as needed to track project activity. • Analyze actual job costs and estimate future cost. • Complete revenue projections. • Analyze percentage of work complete on each assigned project and prepare Progress Invoice to the client for each billing period. • Attend Project Coordination meetings for each assigned project. Participate as project team member to assist in coordinating, scheduling work. Represent Wayne Brothers Inc.'s interest and the interests of the project team. • Coordinate successful closure of assigned projects. • For major projects, conduct Post Project Review Meeting • Attend weekly internal Operations Team meeting and Participate as a team player. • Support continuing education and internal training opportunities for employees • Assist Business Development • Assist Estimating • Assist with Strategic Planning • Assist Executive Management Team with any assignments • Function as Mentor for WBC team. • Cultivate a positive working relationship between WBC, Clients, Subcontractors, and Vendors. • Coordinate, manage, and communicate with all subcontractors • Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. • Ensure that a safe, accident/incident- free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience Minimal 2-year Associate degree in Mechanical Engineering Technology or other related field 4-year Bachelor's Degree - preferred Minimum 5 years related experience - Required Knowledge, Skills and Abilities Required Planning Organizing Coordinating Analyzing and interpreting Data Problem Solving Negotiating Writing, speaking, listening Motivating Work effectively under pressure Analyze situations objectively Cultivate and nurture positive relationships with employees, vendors, and clients Effective at dealing with difficult people and situations Utilitarian Able to forecast future costs with reasonable accuracy Good math/geometry/trigonometry skills Proficient at adding/subtracting/calculating measurements, areas, and volumes Certificates, Licenses, Registrations • Valid Driver's License - Required • OSHA 10-Hour Certification - Required; training provided by Wayne Brothers Physical Demands Sitting for Long Periods of Time including at desk, at plan table, and in vehicle Climbing Ladders or working at heights or in confined spaces occasionally Wearing fall protection occasionally Driving for an extended period of time (1-8 hours) Work extended or occasionally odd hours Walking across uneven terrain and over surfaces under construction frequently Typing frequently Talking on telephone frequently Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PI8fcf14f1d5-

Production Assembler I Location: Sparks, NV Job Type: Full time Requisition ID: JR100006 RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV. The Production Assembler I is primarily responsible for the installation and assembly of all compressor units using specified mechanical components, fabricated parts and assembly hardware. The Production Assembler will use hand and power tools along with measuring instruments according to blueprints, sketches, schematics and other visual aids. In addition, the Assembler will test the operation of assembled components to detect malfunctions. Responsibilities Provide quality, on time assembly of compressors, generators, and associated parts and pieces. Assemble compressors and/or their subassemblies, according to customer's needs, following blueprints and other written and verbal specifications. Overhaul and repair used compressors or components as required to meet customer needs. To control the manufacturing expenses of the plant through the proper use of all supplies and equipment and the meeting of all labor standards. Provide packaging as required for products prior to shipping. Notify supervisor of adequate levels of supplies and tools for completion of assigned production. To ensure effective communication within the department and with all company functions. Adhere to all safety policies and practices. Maintain the plant facilities and equipment as directed. Misc. duties may include painting, general cleaning and basic building maintenance. Participate in cross training within the Production Department. Set up and test-run of completed machine through fixed test cycles. Independently set up and test for noise and vibration using test equipment. Overhauls and rebuilds machines and equipment. Perform all other duties in the best interest of the company or as directed by the Production Supervisor and Plant Manager. All Other Duties as Assigned Production Assembler 2 Responsibilities: Along with all responsibilities above Regulate workload with planning if necessary, back up supervisors in maintaining workload Provide adequate information of scheduling accuracy while working with planning to complete and finish work orders in a timely manner Perform functions on CSI relating to inventory issues, and/or closing out jobs. Minimum Qualifications Degree from technical school or equivalent combination of education and work experience. One year experience as a mechanical assembler or mechanic in any related field. Ability to read and understand structural drawing, schematics and operating manuals. Valid Driver's License. Ability to perform calculations such as percentages, ratios and fractions. Ability to learn basic computer skills and ability to adapt to a variety of software applications. Ability to understand the use and application of air and gas compressors and generators and basic manufacturing tooling and equipment. Ability to communicate with others to exchange information both orally and in writing. Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance. Preferred Qualifications Advance course work in any Mechanical assembly discipline. Specific experience in the manufacture of air and gas compressors and generators. Physical Requirements & Work Environment This position is regularly exposed to the following conditions: Manufacturing, warehouse and office environments While working near moving equipment, mechanical parts and lift trucks; must have the ability to follow safe operating procedures. May be exposed to loud noise, fumes and/or toxic chemicals. Must have the following physical abilities: Ability to stoop, kneel, crouch, bend, stretch, reach, and lift. Ability to lift up to 50 pounds regularly. Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers. Compensation $21.00 per hour + DOE Equal Opportunity RIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations). About RIX Industries RIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture. PIfffd5d5973b0-0921

MobilityWorks , serves the disabled community with wheelchair accessible minivans, full-size vans with lifts, as well as commercial fleet vehicles. Our mission is to provide wheelchair users with the mobility, independence, and personal freedom they desire. Keep reading to see how you can join the team leading this effort! MobilityWorks is seeking a Commercial Vehicle Consultant . We provide a great work-life balance with regular business hours so you can be home spending time with family or doing what you love most! BE THERE- MobilityWorks believes that every team member is an important part of the MobilityWorks team, and we value the skills, efforts, and contributions made by each member of our team. We believe in our mission and make every effort to live our core values. The Commercial Vehicle Consultant works collaboratively within our national Commercial Sales team to develop emerging markets, identify new business opportunities, and initiate outreach to prospective commercial clients. This role focuses on lead generation, outbound engagement, and supporting sales operations across the commercial mobility market. Region covered: Nevada, Utah and Arizona. Base Salary plus commissions! Projected earnings up to $150k your first year! No cap on income. Essential Job Functions and Duties: Drive proactive market intelligence efforts by identifying and qualifying businesses providing wheelchair-accessible transportation using advanced digital research tools and data platforms (e.g., Google, LinkedIn, online business directories, and industry-specific databases). Execute 30-50 high-impact outbound sales activities daily (calls, emails, social outreach) to engage prospects, identify key decision-makers, and generate qualified commercial opportunities. Expand brand presence through strategic community and industry networking, representing MBW at local events, professional groups, and transportation/mobility networks to develop new business channels. Maintain exceptional CRM accuracy and discipline, ensuring all prospect, client, and activity data is fully documented, current, and actionable to support pipeline management and forecasting. Develop and strengthen partnerships across OEM dealerships, Fleet Management companies, Transportation providers, Micro Transit organizations, NEMT operators, Senior Living Communities, and Group Homes to drive long-term commercial growth. Lead the development of complex vehicle quotations, utilizing company tools, configuration systems, and customer requirements to generate precise full-size vehicle proposals. Support the end-to-end vehicle conversion process, ensuring documentation, specifications, and order requirements are accurate and aligned with production timelines. Collaborate closely with internal teams, including Local Store General Managers, Service Managers, and operational staff to clearly communicate commercial expectations, align on client needs, and ensure seamless delivery of commitments. Ensure absolute compliance with company policies, safety standards, and all applicable state and industry regulations. Model MBW's Core Values (LOVE IT) through every interaction with customers, partners, and internal teams. Proactively take on additional responsibilities to support team success and evolving business needs. Position Qualifications and Experience: High school diploma or GED required; associate or bachelor's degree preferred. Three (3) years of experience in outside sales preferred. Automotive sales experience preferred. Skills/Abilities: Strong ability to organize, prioritize, and independently manage daily activities. Proven experience engaging effectively with diverse customer groups. Exceptional communication skills, verbal, written, and interpersonal. Proficient in utilizing CRM platforms to manage customer and prospect data. Demonstrated ability to work independently with minimal supervision. Physical Demands/Work Environment: Ability to travel within defined geographic sales territory, estimated 15-20%. Ability to work effectively in a professional office environment utilizing standard equipment (phones, computers, software platforms (Excel, Salesforce, Word, PowerPoint, etc.). Must be capable of performing typical office-related physical activities (e.g., walking, standing, speaking, hearing, reaching, viewing screens, bending, etc.), as necessary to perform job functions. What We offer you: Work/Life Balance - Hours of operation 8-5, Monday - Friday, no late nights, No weekends! Competitive Compensation Packages- Base Salary plus commissions Medical, Dental & Vision Insurance plan(s). Flexible Spending Account(s) 8 paid holidays, Personal Time Off, Social Responsibility Time. Employer Paid Benefits such as Tuition Reimbursement Program, Employee Assistance Program, Life and Disability insurance. 401(k) Retirement Plan An incredibly rewarding experience in a team-centered environment. Military Veterans are highly encouraged to apply! We embrace diversity! Be part of an organization that invests in YOU!

Description: Clarence NY 14031 Pay Rate: $60k-$85k per year (Based on Experience) Job Summary for Estimator: The Sheet Metal Manufacturing Estimator prepares accurate, competitive, and timely cost estimates for fabricated sheet metal components and assemblies. This role evaluates manufacturing drawings, material requirements, labor, outside services, and production methods to determine the most cost-effective and profitable approach. The Estimator collaborates with engineering, production, quality, and customers to clarify technical requirements, assess manufacturability risks, and support revenue growth through accurate and strategic quoting. Essential Duties and Responsibilities for Estimator: Reviews and interprets manufacturing drawings, blueprints, and 3D models to determine scope and manufacturability. Analyzes GD&T and tolerance stack-ups to identify risk, complexity, and cost impact. Develops detailed cost estimates including material usage, labor hours, machine time, tooling, outside services, finishing, hardware, and assembly operations. Evaluates alternative production methods to determine the most efficient and cost-effective manufacturing strategy. Prepares and submits RFQs within required turnaround times while maintaining accuracy and margin objectives. Communicates directly with customers to clarify specifications, resolve discrepancies, and manage expectations. Collaborates cross-functionally with engineering, production, and quality teams to ensure alignment on technical requirements. Identifies design risks and recommends cost-saving or manufacturability improvements. Tracks quote performance, including win/loss trends, and supports continuous improvement of estimating accuracy. Maintains organized documentation of estimates, assumptions, and supporting calculations within ERP/MRP systems. Requirements: Knowledge, Skills, and Abilities for Estimator: Strong ability to read and interpret complex manufacturing drawings and technical documentation. Solid understanding of GD&T, tolerance stack-ups, and manufacturability analysis. Comprehensive knowledge of sheet metal fabrication processes including laser cutting, turret punching, forming/bending, welding, hardware insertion, and finishing/coating operations. Understanding of material properties and cost drivers in metal manufacturing environments. Proficiency in ERP/MRP systems, Excel, and estimating software. Demonstrated ability to manage multiple concurrent RFQs in a deadline-driven environment. Strong analytical skills with a high level of accuracy and accountability for estimate profitability. Effective communication skills with the ability to work cross-functionally and interact directly with B2B customers. Organized and detail-oriented with strong prioritization skills. Experience and Education: 3+ years of estimating experience in sheet metal manufacturing or a related fabrication environment required. Background in fabrication, engineering, or manufacturing preferred. Associate's or Bachelor's degree in Engineering, Manufacturing, or a related field preferred (or equivalent hands-on experience). Compensation details: 0 Yearly Salary PI62b3905b5-

Company: Command Web Offset Company Inc Title: Trimmer Operator Job Category: Operations & Production Requisition Number: TRIMM001008 Job Type: Full-Time Jefferson City, MO, 65101, USA Brief: The Trimmer Operator is responsible for efficiently and safely trimming, preparing, and processing products in accordance with company standards and quality requirements. This role ensures that production goals are met while maintaining high levels of accuracy and attention to detail. Detailed: Command Missouri, a family-owned business, is one of the nation's leading book manufacturers. Our state of the art manufacturing facility produces millions of books each week. In addition to very competitive wages and benefits, you will experience a team environment, state of the art equipment, completely air-conditioned and clean working environment. Command Missouri has immediate openings for Trimmer Operators on all shifts! A qualified Trimmer Operator will be able to the perform the following tasks: • Measuring books and inspecting bind for quality issues. • Required to keep good records and ensure product meet quality standards. • Maintain safety and OSHA standards as well as professional work area. • Candidates must be able to communicate effectively with Supervision, tech support, and other associates. • Ability to work in a fast-paced environment. • Capacity to understand printing jobs and instructions • Changing knives on trimmer if needed • Checking label and carton quality • Performing weekly preventative maintenance Requirements The Trimmer Operator should meet the following requirements: • Qualified candidates will be able to work 8, 10 or 12 hours and work weekends as well on an as needed basis. • Previous experience as a trimmer operator • Safety and Quality minded • Should be able to work with minimal supervision and be an individual contributor • Must be reliable and consistently at work and on time • Excellent time management skills and ability to prioritize work to meet deadlines • Must have positive and effective communication with other team members Command Missouri is proud to offer competitive pay and great benefits! • Medical, dental, vision coverage • Company-paid life insurance • Voluntary long-term and short-term disability coverage • Paid time off • Company paid holidays • 401(k) with company match • Employee Assistance Program • Shift differential - $1.00 for 2nd shift, $1.50 for 3rd shift • Employee recognition programs • Referral Programs • And more! By joining the Command Missouri team, you will become part of one of the most exciting teams in the manufacturing industry. If you are looking for a great career that provides job satisfaction and professional advancement with a company that values YOU, join our team today! No recruiter or agency inquiries, please. PM21 PI3342d64d4d7e-1316

Eagle River Seed Farm - Associate Utility Technician Position Summary Reporting to the Operations Supervisor, the Utility Technician is accountable for a wide-range of duties associated with maintaining and operating a seed farm. The range of duties fall under several functional areas of the farm including maintenance and repair of equipment and buildings, loading and driving trucks, completing and recording information in the computer system, operating conveyance and other field equipment and applying crop inputs that may include spreading, hilling, and spraying according to the agronomic crop plan. Based on experience, knowledge, skills, and abilities, team members are placed into one of three position levels: 1) Associate Utility Technician; 2) Utility Technician and 3) Master Utility Technician. In any one of these three positions technicians may work in a concentrated area of farm operations based on their experience with expectations to provide assistance in all functional areas based on the demands with each respective farm season. Key Business Outcomes Increased Equipment Life Cycle Yield and Quality Target Achieved Equipment maintained available and ready for use for all seasons Reduced Downtime in Field and Shed Operations Equipment Data Retention Key Performance Indicators Work Order Completion Rate (Meeting standard for task assigned) Maintenance software entry complete and accurate Rework Rate Minimal Operational downtime Agronomic Plan Adherence Precision of Field Performance (technology) Qualifications Driver's License with an Acceptable Driving Record for all positions Associate Utility Technician : limited mechanical work experience; requires supervision to complete tasks or project to gain decision-making, troubleshooting, safe use of tools and quality workmanship Competencies and Success Factors Mechanical Aptitude: Understands and properly uses machines and tools; applies mechanical and physical principles; applies mechanical reasoning and tool knowledge to trouble shoot and repair equipment. Maximizes resources to troubleshoot including network and manufacturers manuals. Safe Work Habits: Maintains clean and organized work area. References vehicle, machinery safety manuals or chemical labels prior to use and follows instructions as indicated. Follows safety rules or protocols. References Material Safety Date Sheet as appropriate. Wears PPE as required. Maintains a safe personal disposition by listening, showing patience and respecting people, tools and property. Takes ownership of a safe workplace for others. Quantity of Work : Completes work according to established deadlines without compromising quality and safety. Manages time effectively. Follows priorities established by management. Follows up with management to stay busy doing value-added work. Dependable Work Habits : Trusted employee: Reports to work as scheduled. Gets along with team members. Follows policies and standard operating procedures. Stays busy doing value added work. Treats others with respect. Communication Effectiveness: Communicates problems with supervisor. Communicates status updates on projects daily or as often as needed. Maintains respectful communication with all people at work. Verbal and written work is clear. People Development /Training : the Master Technician provides management support and back-up and acts as a subject matter expert in farm operations and maintenance to develop others. Efforts good relationships with all team members and embraces diversity among team members. Uses honesty and candor to build collaboration. Appropriately adapts training style and approach to each situation to achieve desired results or skill mastery. Works to improve training skills through seeking feedback, reading or additional training/certifications. Provides timely, accurate, information to others about the impact and outcomes of their actions through training. Accountabilities Performs a wide range of duties associated with maintaining and operating a seed farm including but not limited to maintenance and repair of equipment and buildings, loading and driving trucks, completing and recording information in the computer system, operating conveyance and other field equipment and applying crop inputs that may include spreading, hilling, and spraying according to the agronomic crop plan. Provides preventative and troubleshooting in the moment maintenance support for various types of agricultural operating equipment to include but not limited to crop handling, irrigation systems and fleet. The preventative and troubleshooting areas include but not limited to mechanics, electrical, pneumatic, hydraulic, engine, heating and cooling, and tires as directed by the supervisor. Disassembles and assembles components according to manufacturer's specifications. Uses tools within the scope of their safe intended use. Examples of equipment and tools (but not limited to) tractors, harvester, skid steer, sprayer, backhoe, bulldozer, bulk truck, forklift, chainsaw, pneumatic tools, etc Diagnoses equipment using tools such as but not limited to scanners, gauges and instruments.Maintains accurate and timely data in emaintenance including opening, completing all fields required and properly saving and closing work orders to track work completed on each piece of equipment.Ensures cleanliness of shop and work area to eliminate reduce any safety hazards.Cleans and Sanitizing Agriculture equipment and fleet Orders parts as needed with approval of the supervisor. Operates various type of agricultural equipment such as not limited to bulk trucks, 300-600 horsepower tractors, fork-lift, conveyance equipment, and irrigation systems.Ensures fertilizer gets delivered to the fields in a timely manner and scouts fields for plant diseases.Assists in spraying fertilizer or pesticide solutions to maximize yieldScoops, loads and drives seed potatoes from storage facilities Maintains storage facilitiesSupports facilities and grounds maintenanceAssists in potato grading and shipping activities when needed such as dumping, grading, piling, scooping, hauling and loading trucksAdheres to all safety and general company policies and procedures and informs supervisors about concerns such as but not limited to faulty equipment design, and unsafe working conditions.Maintains a strong knowledge base on the safe and efficient use of agricultural equipment, agricultural technology and agronomic application best practices. Physical Activities/Demands : This position is approximately 10% sedentary, involving sitting for extended periods during operation of equipment. The remaining balance of this position, approximately 90% requires actively working in/around indoor and outdoor manufacturing and agricultural environments. This position requires the ability to: ascend/descend various types of ladders, stairs and equipment; move oneself into different positions in various environments (sometimes tight and confined); bend, stoop, squat and kneel: reach for and lift objects above the shoulder; walk distances on firm, uneven and soft terrain; lift up to 50 pounds and occasionally more with the discretion of team lift; communicate with others via voice, listening and verbal response; read and write to receive instruction, document work and heed safety warnings; repeat motions with the wrists, hands and fingers; operate machinery, power tools, vehicles and heavy equipment; visually inspect work in near/distant scenarios including need for peripheral vision and depth perception, sit for extended periods of time. Environmental Conditions : Physical activities may be performed in both indoor (office/shop/production areas) and outdoor environments (fields/storage areas) which could include low and high temperatures; precipitation and wind; noisy environments; potential exposure to chemicals/pesticides; dusty or poorly ventilated environments; darkness/low light. PIe49822c9fed2-5611

Description: About our company Bakerly, a happy family-owned company, is proud to be home to one of the fastest-growing brands in the US food industry! We are a baked goods manufacturer that emphasizes delicious, premium, and authentic recipes using only the very best ingredients. Our offices located in Miami, FL, Easton, PA, and San Antonio, TX, will make you feel right at home. Please visit our website to learn more about our delicious French crêpes, golden croissants, fluffy pancakes, and our large range of outstanding French brioches. The Maintenance Technician, Automation and Controls is responsible for the installation, maintenance, optimization, and repair of automation and controls systems at Bakerly Ranch. Additionally, they are responsible for troubleshooting PLCs and component parts, including motion sensors, control components, photosensors, and other vital technology on the production line. They will operate as subject matter expert for automation and controls and assist in all aspects of maintenance to support the overall department goals to include facilities and ammonia. The Maintenance Technician, Automation and Controls will effectively communicate with all departments, deliver regular reports on current automation capabilities and future opportunities, and develop and deliver training on associated technologies to increase production and efficiency. Requirements: Assist engineering and plant staff with the specification, installation, and modification of automated systems. Maintain awareness and communicate how changes to automation and controls impact the efficiency of the line. Communicate status of projects or impediments, manage expectations and articulate timelines, quickly resolve issues, and ensure consistent functionality of automation systems and controls. Install, maintain, and inspect control systems and workstation installations throughout the facility. Ensure machines are properly calibrated at the appropriate frequency and assist with annual calibrations and inspections of equipment. Update Preventive Maintenance plans based on data analysis of failures. Assist in maintenance projects to support the overall Maintenance Department goals to include facilities and refrigerant tasking. Forecast and provide expertise to continue the advancement of automated systems throughout the plant. Coordinate schedules and delegate tasks to accomplish departmental goals. Provide technical guidance and mentoring to automation technicians and other colleagues working with automation and controls at the facility. Provide and document effective training to operators on automation systems. Provide ongoing troubleshooting and maintenance support for automated systems and work directly with machine operators and production supervisors to resolve mechanical issues that arise during production. Support continuous improvement, modification of job plans or work orders, inspection audits, and assisting vendors who are on site for repairs Lead and monitor all machinery and equipment adjustments and perform all tasks and duties necessary for efficient start-ups, daily operations, change-over and shut-downs. Utilize the CMMS (Manager Plus) system for creating, updating, and completing workorders. Identify, implement, and document maintenance and reliability best practices for automation systems and controls within Bakerly Ranch. Requirements: 2 years of experience in electrical, mechanical, or industrial automation is required and experience in the manufacturing industry is ideal. Experience working with PLCs, industrial electricity, automation control, and mechanical repairs. Familiarity with plant specific automation products such as SewEuro, Siemens PLCs & VFDs. Basic knowledge in AutoCAD / SolidWorks. Excellent interpersonal, written, and oral communication skills including the ability to communicate with managers, technicians, contractors, and to be able to explain basic electrical and mechanical processes and theory. Proficient with Microsoft Office. Good problem-solving abilities, ability to work autonomously, and result oriented. Ability to work in extreme temperatures, heights, in and around machinery and chemicals. Ability to work a flexible schedule. Ability to lift 50 pounds repeatedly. High school diploma or equivalent. Benefits and Perks: Competitive salary and performance-based bonus incentives. Comprehensive health, dental, and vision insurance packages. Employer-paid life insurance and flexible spending accounts (FSA). Free stress-management counseling and discounts on health and fitness products. Two additional PTO days for marriage, birth, or adoption. 40% discount on all company products. Generous PTO policy and 401k plan with a 3% employer match. We are committed to ensuring a diverse and inclusive workplace, free from discrimination. Our recruitment process is based solely on individual qualifications and skills, without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. We adhere to all applicable laws and regulations regarding non-discrimination in employment. PIabeab74bfe49-8191

BHE GT&S has an exciting career opportunity for a Gas Transmission Operations Supervisor at our 24HR. Smithville Station located in Smithville, WV. Responsibilities Supervise employees and contractors engaged in the operation and maintenance of natural gas handling facilities and related equipment. Ensure the safe reliable and efficient operation of natural gas production and transmission facilities and equipment. Monitor and inspect job sites facilities and databases to ensure company procedures are followed and that compliance is maintained relative to all applicable local state and federal regulatory requirements. Maintain a proactive planning and scheduling process to effectively utilize manpower and complete tasks within the time schedules established. Develop implement and monitor budgets for O&M and Capital Projects. Manage projects (e.g. generate prioritize schedule scope estimate requisition materials contract track and document). Communicate across varied disciplines to complete tasks and resolve issues/act as a liaison with public officials' landowners' regulatory personnel contractors and company employees. Train evaluates and coach direct reports to enhance job performance and ensure qualification to perform required tasks. Participate in facility audits and issue resolution. Administer and adhere to company policies and the union contract. Qualifications Minimum 9 years of work experience in the Operation, Maintenance and Construction of natural gas transmission and storage facilities or related work experience in the Operation, Maintenance & Construction of power plants (natural gas, coal or nuclear) OR, Minimum 7 years of work experience in the Operation, Maintenance and Construction of natural gas transmission and storage facilities or related work experience in the Operation, Maintenance & Construction of power plants (natural gas, coal or nuclear) and an associate degree in a related field OR, Minimum 5 years of work experience in the Operation, Maintenance and Construction of natural gas transmission and storage facilities or related work experience in the Operation, Maintenance & Construction of power plants (natural gas, coal or nuclear) and a bachelor's degree in a related field. Knowledge of and experience in the Operation, Maintenance and Construction of natural gas transmission and storage facilities. Specific experience with these types of facilities and their related ancillary equipment; natural gas transmission pipelines, compressor stations, storage wells and measurement & regulation stations. Understanding and experience with the implementation of company policies/procedures and compliance with applicable regulations pertinent to the position (i.e. DOT, OSHA, FERC, OQ, environmental, etc.). Understanding of budgeting (capital and O & M) and purchasing (material procurement, service and equipment contracting, etc.) processes. Ability to effectively supervise a diverse work group. Proven planning, organizing and prioritization skills. Ability to communicate across a broad range of disciplines to develop rapport, synergies and effective relationships. Demonstrated proficiency in the use of logical problem analysis to facilitate the development of solutions and options to resolve problems. Proficiency in the compilation and evaluation of records, reports and drawings in written and database systems (i.e. engineering schematics, inspection databases, budget reports, financial accounting systems). Ability to effectively utilize a personal computer and the associated programs, systems and databases. Prior supervisory experience in a related operations or technical field preferred. Education : Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.) Preferred Degree Business Preferred Licenses, Certifications, Qualifications or Standards NA CHAMPION : Contribute to a team-centric work environment based on mutual respect and integrity Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. About Us BHE GT&S is an interstate natural gas transmission and storage company that gives large customers more options in moving gas safely, reliably and efficiently. Headquartered in Richmond, Virginia, with operations in 10 states, BHE GT&S employees take pride in our work and are committed to innovative and sustainable natural gas energy solutions. Through our liquefied natural gas facilities, multi-state pipeline systems, and storage operations we support a number of large customers, including major utilities, power plants, marine transportation and heavy-duty trucking, along with manufacturing. Our employees are integral to our success and work hard to exceed customer expectations. We provide fulfilling employment opportunities, are committed to attracting and retaining the best employees, and focus on providing a safe and inclusive work environment. About the Team BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation. PIe4d2548d0a69-4235

Overview : At TDS Telecom, connecting people is at the heart of everything we do. We are forward thinkers who leverage cutting-edge fiber internet technology to strengthen communities. We are dedicated to excellence, which drives us to succeed together, creating a better world through meaningful connections. Ready to make an impact? Pay Transparency The pay for this position ranges from $25.13 to $41.42 per hour. The listed pay range reflects the minimum and maximum base salary. Actual offers will be based on factors such as skills, qualifications, experience, location, and role-specific competencies. Some positions may also offer additional compensation, such as bonuses or equity awards. As the Fiber Splicer-Outside Plant Construction in Spokane, WA, you will be responsible for the placement of enclosures, splicing, testing, and documentation of outside plant fiber optic facilities with relation to Outside Plant (OSP) Construction projects. You will operate the fiber fusion splicer, OTDR, and optical light testers to ensure adherence to TDS fiber splicing standards while ensuring accuracy and timely documentation of the final product for project closing. In this role, you will complete fiber splicing for projects while coordinating with OSP construction, OSP construction contractors, and internal construction teams, ensuring project timelines are met with relation to new network turnup activities. This position is eligible for a $1,000 sign-on bonus! (Payout terms apply) This position may be eligible for relocation assistance. For further information, please contact the Talent Acquisition team. What You'll Do: Install fiber enclosures and perform fusion splicing, OTDR, and light level testing. Troubleshoot and repair buried and aerial fiber. Identify cable faults and complete acceptance testing. Document work, update as builts/redlines, and support project closeout. Read construction plans and coordinate daily tasks with OSP teams and contractors. Maintain equipment, complete paperwork, and assist Field Services as needed. Why You'll Love This Role: Hands on, outdoor work building real infrastructure that matters. Flexible, full time year round schedule. Work with a company that has 50+ years of telecom experience and a strong reputation for fiber innovation. Responsibilities : Perform operation of fiber optic fusion splicer, OTDR, and light level testing equipment to facilitate splicing and light level quality according to TDS standards. Performs beginner to intermediate operation of all test equipment associated with fiber optic plant facilities splicing, testing, and documentation. Installs fiber enclosures and optical tap cases; splices, troubleshoots, tests, repairs, and documents all fiber as part of OSP construction projects. Identifies the location of defective cable and fusion splices using various test equipment. Repairs buried and aerial fiber optic cables. Performs cable fault acceptance tests on newly constructed facilities. Completes all testing documentation and returns as part of project closing requirements. Receives maps and staking sheets for full construction project and ensures project is spliced, tested, and documented with guidance from team mentors or leadership. Communicates updates to the project team as required. Takes direction on daily and weekly project work based on deadlines, material and equipment availability, weather, and other factors. Coordinates with supervisor to ensure continual supply of work and availability of materials. Drafts and submits redlines and splice documentation upon completion of project. Sets splice enclosures and splice cases according to design, splices fiber, tests, and documents all project fiber locations as part of daily activity. Regularly engages with Network Services OSP construction teams, OSP construction contractors and internal construction teams to align with daily tasks. Reads construction plans and determines best approach for completing fiber splicing work. Maintains all project documentation including completion of weekly as built records and daily production reports with support from. Ensures DOT inspections are performed on equipment where required. Works with project managers, OSP construction contractors, and internal construction teams to ensure projects remain on schedule. Services, cleans, maintains, and repairs equipment. Completes all related paperwork in a timely manner. Provides assistance to Field Services technicians as needed. The functions listed above are intended to describe the general nature and level of work being performed by associates assigned to this job. They are not intended to be an exhaustive list of all responsibilities; other duties may be assigned. Qualifications : Required Qualifications 1+ year of telecommunications inside or outside plant experience working with fiber optic installation, splicing, and testing experience -OR- 1+ year of telecommunications inside or outside plant experience working with copper or coax installation, splicing, and testing -OR- current military service or prior military service with honorable discharge. Must follow the TDS attendance guidelines in order to meet TDS's business needs, including but not limited to our obligations to our customers and to our customers' needs. Must have and maintain a valid driver's license and remain eligible for DOT requirements. Other Qualifications Understanding of telecommunication products and services with relation to fiber optic technology. Physical requirements may vary based on company needs: ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull. Upon hire, must successfully pass all components of the Safety Training course curriculum. Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer. Proven organizational skills and ability to multi-task. May require occasional travel. Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate. Must be able to operate vehicles with manual transmissions. Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what's listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today! Physical Demands and Work Environment While performing the duties of this job, the associate is regularly required to use hands to finger, handle, or feel and talk or hear. The associate is frequently required to stand; walk; and stoop, kneel, crouch or crawl. The associate must also be able to climb poles, ladders, towers or other structures. The associate is occasionally required to sit, reach with hands and arms, climb or balance, and taste or smell. The associate must regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. While performing the duties of this job, the associate is regularly exposed to outside weather conditions and may have to work in attics and crawl spaces, or high-risk areas such as high voltage electrical, trenches, and manholes. The associate is frequently exposed to moving mechanical parts and heavy equipment; high, precarious places; fumes or airborne particles; and vibration. The associate is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the work environment is at times loud. Benefits We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority! Associates scheduled to work 20 or more hours per week have access to: Medical Coverage Dental Coverage Vision Coverage Life Insurance 401(k) Plan Generous Vacation & Paid Sick Leave Seven Paid National Holidays & One Floating Holiday Paid Parental Leave (6 weeks after 12 months of employment) Adoption & Surrogacy Assistance Employee Assistance & Wellness Programs Associates working 30 or more hours per week additionally have access to: Short-Term & Long-Term Disability TDS Service Discounts Education Assistance Paid Volunteer Time In addition to these benefits, all associates will have the opportunity to participate in our Associate Resource Groups, which are designed to encourage community and facilitate professional development . click apply for full job details

Position Overview: We are seeking a highly skilled and motivated MRI Technician to join our dynamic healthcare team in Long Island, NY. In this role, you will perform high-quality MRI scans while ensuring patient safety, comfort, and satisfaction. You will collaborate closely with radiologists and other healthcare professionals to deliver accurate and timely diagnostic images in a supportive and professional environment. Key Responsibilities: Perform MRI scans according to physician orders, ensuring the production of high-quality diagnostic images. Prepare and position patients for MRI procedures while maintaining strict adherence to safety protocols and comfort standards. Review patient medical histories and relevant information to ensure appropriate imaging techniques are used. Monitor patients throughout the MRI process, responding to their needs and ensuring safety at all times. Operate and maintain MRI equipment in accordance with manufacturer specifications and healthcare regulations. Evaluate images for clarity and diagnostic quality, ensuring all scans meet clinical requirements. Accurately document patient information, scan details, and imaging results while maintaining confidentiality. Collaborate with radiologists, physicians, and other medical staff to ensure comprehensive and coordinated patient care. Qualifications: Associate s degree (or equivalent) in Radiologic Technology, MRI Technology, or a related field. Current ARRT (American Registry of Radiologic Technologists) certification in MRI, or eligibility to obtain. Active New York State licensure as an MRI Technologist. Strong understanding of MRI safety standards, procedures, and protocols. Excellent interpersonal and communication skills with a compassionate approach to patient care. Ability to work effectively in a fast-paced clinical environment while maintaining attention to detail. Demonstrated ability to work both independently and collaboratively as part of a multidisciplinary team. Apply Now If you are a dedicated and detail-oriented MRI Technician seeking an opportunity to advance your career in a supportive and innovative healthcare environment, we d love to hear from you!

Job Title: Line Supervisor- 3rd Shift Location: Random Lake, WI 53075 Description: Description Overview: The Production Line Supervisor is responsible for leading, training, and motivating a cross-functional team to safely maximize output while maintaining high-quality standards in a fast-paced beverage manufacturing environment. This role oversees production processes, equipment functionality, and plant cleanliness, ensuring operational excellence and continuous improvement. 3rd shift= 10:00pm - 6:30am Key Responsibilities: Excellence in Leadership: Take charge of the production line, lead personnel by example, and manage processes and equipment, while fostering a positive culture of accountability and teamwork. Optimize Performance: Ensure equipment operates at peak efficiency, minimizing downtime while meeting or exceeding productivity, safety, and quality targets. Drive Continuous Improvement: Identify bottlenecks, creatively problem-solve, and implement solutions to enhance productivity, safety, and quality. Coach, Train, and Develop: Guide, mentor, and assist production team members in performing tasks safely, efficiently, and in compliance with standardized procedures-with a special emphasis on developing machine operators to assist in and take over certain maintenance and sanitation functions such as CIPs and preventative maintenance. Prioritize Team Well-Being: Place the safety and development of team members above all else, ensuring a positive and disciplined work environment. Cross-Team Collaboration and Cohesion: Communicate effectively with Quality, Sanitation, and Maintenance teams to ensure seamless coordination. Set and Enforce the Standard: Ensure compliance with all operational and safety protocols, to include Good Manufacturing Practices (GMPs), PPE compliance, forklift safety, break times, and production and equipment SOPs. Supervise and Lead Daily Operations: Lead Shop Floor Meetings, update efficiency boards, ensure all production records are accurately completed. Oversee Training: Monitor training progress, maintain documentation, and ensure adherence to job standards and regulatory requirements. Problem Solving and Resource Allocation: Assist in and allocate resources to equipment maintenance, troubleshooting, line changeovers, and sanitation as needed. Maintain Cleanliness: Ensure work areas meet hygiene standards and leave the production line in better condition than found. Other duties as assigned. Qualifications Education and Experience: High school diploma or equivalent required; associate degree in Manufacturing Supervision or related field preferred. 3+ years of manufacturing experience (food/beverage industry and machinery experience preferred). 1-2 years of supervisory/management experience preferred. Skills and Abilities: Demonstrated leadership success in a manufacturing setting. Strong analytical skills with high attention to detail. Ability to prioritize tasks based on business needs with a proactive, high-urgency approach. Excellent interpersonal, verbal, and written communication skills. Ability to coach, mentor, and develop team members while fostering trust and collaboration. Proficient in reading and explaining job standards, quality specifications, and regulatory requirements. Forklift certification (provided by Krier Beverage, LLC). Food Safety Training required. Work Conditions: Must comply with Quality Management System and Food Safety Management policies. Overtime and occasional weekend work may be required. PI7fe91c9b12fd-3993