753 jobs found

JOB SUMMARY This is an Operations position responsible for maintaining and coordinating all slotting processes in a cost-efficient manner. Must maintain a balance between the Sysco Redistribution Center, merchandising and the selection pick path. RESPONSIBILITIES Determine warehouse placement of all incoming merchandise and ensures that merchandise is slotted within before receipt. Decide placement of new item merchandising and reports slot to appropriate staff to efficiently store merchandise for future delivery. Prepare a slot change memo identifying the rearrangement of products. Move product, as needed, to make room for new products to efficiently utilize warehouse space and track product movement through the warehouse. Enter slot changes into the inventory tracking system to ensure that all product locations can be identified. Rearrange merchandise in the warehouse to maximize total cubic feet usage of available warehouse space. Identify "like items" that are slotted in such a way that the products may not be confused and mispicked; Separate items, as needed, to reduce the possibility of mispick and misdelivery of products to customers. Check slots of discontinued items to determine if the product is gone. Approve the deletion of the item code numbers if the product is removed to ensure that no product is wasted due to deletion from the inventory tracking system. Update, through data entry, slot changes, alterations, expansions, etc., to ensure that the system correctly identifies product location at all times. Plan and prepare a draft of warehouse racking expansion, as request, to ensure the fullest utilization of warehouse space. Establish additional racking components needs. Conform to appropriate equipment (i.e. tugs, forklifts, pallet jacks) operation rules and practices to reduce accidents and injuries. Ensure that assigned equipment is maintained and clean, and report repair or service needs to the equipment mechanic to reduce equipment damage. Observe all safety rules, regulations, and sanitation policies to reduce accidents, injuries, and equipment damage. Use equipment horns when driving out of storage areas into unobstructed view areas, and when entering walkways or row intersections to reduce accidents, injuries and equipment damage. Plug batteries into the power outlet when not in use to ensure the availability of fully operational equipment. QUALIFICATIONS Education High school diploma or General Education Development (GED) or equivalent preferred. Experience 3+ years' experience in the Warehouse/Distribution Services field preferred. Requirement 18+ years of age Pass employment testing Professional Skills Able to read, write and communicate effectively, as it relates to the job and the safety regulations Working knowledge of the following: inventory control techniques and procedures, product lines and their dimensions, products sold by Sysco, Sysco safety and security policies, equipment associated with warehouse activities and the operation of the equipment Good working knowledge of the following systems and technologies: Sysco Warehouse Management System (SWMS), Sysco Uniform System (SUS), Radio Frequency (RF) Admin (both Spec 1 and Spec 24), SOS, LAS, Driver Tech, RoadNet or equivalent. Personal computer skills, inclusive of Microsoft Word and Excel. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Lift 50 pounds regularly and occasionally up to 100 pounds. The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

JOB SUMMARY This is an Operations position responsible for managing the activities associated with night warehouse operations. Responsibilities include, but are not limited to, managing order selection, order loading, product stocking and replenishment, night operations equipment and software inventory maintenance and repair; ensuring safety and security of night warehouse operations and providing management and direction to the night warehouse staff. RESPONSIBILITIES Manages the daily work and safety of associates engaged in order selection, product replenishment, and order loading, to include all warehouse functions, selectors, loaders and night forklift operators. Oversees labor hours and consumable supplies within budget. Prepares work schedules including extra work days and shifts as needed. Handles the proper utilization of Company assets in support of the warehouse. Coordinates required repairs with proper departments as necessary. Reviews night warehouse functions and various warehouse productivity reporting. Suggests efficiency ideas, cost reduction measures and assists with the implementation of changes within the night warehouse. Identifies problems, proposes solutions to other members of management and promotes cooperation with other departments. Conducts shipping and loading audits daily ensuring all required documentation is accurately completed (including HAACP, food safety, and catch-weight documentation) and that material is handled and stored correctly with a minimum potential for loss. Assists with monitoring sanitation and facility/racking damage to ensure a safe and clean warehouse. Preserves associate relations through regular department or pre-shift meetings. Maintains on-going interaction. Keeps open communication channels with associates by answering questions and explaining policies and procedures. Monitors associate morale. Submits and responds to ideas to improve associate engagement and enablement. Interprets trains and consistently enforces Company policies and procedures. Coordinates efforts with the Safety department to aid in training, conducting associate observations, updating preferred work methods, conducting accident investigations to determine root causes, and routine safety inspections. Makes recommendations for disciplinary action and/or behavior modification where required. Executes management functions of staff selection, development, discipline, performance reviews and/or terminations. Performs the duties of associates supervised and other related duties as needed. Complies with local, state and federal regulatory agencies (i.e. OSHA, AIB, FDA, USDA, etc.) QUALIFICATIONS Education High school diploma or general education degree (GED). 2 or 4-year college degree in Business Management, Supply Chain Management or similar major preferred. Experience 3-5 years related experience and/or training; or equivalent combination of education and related experience. Professional Skills Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Write reports, business correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Can add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Demonstrate knowledge of Spreadsheet software and Word Processing software, and ability to learn Sysco technology software and programs. Successfully engage and lead individual and team discussions and meetings. Apply all relevant policies in a consistent, timely and objective manner. Capable of working with peers and associates from other departments and shifts proactively and constructively. Work in a disciplined manner and capable of following established procedures, practices and comply with local, state and federal regulations. Reports to work promptly and regularly; works well with others; demonstrates the ability to consistently meet deadlines. Certificates, Licenses, and Registrations Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to talk or hear. Frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. Occasionally required to stoop, kneel, crouch, or crawl. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts. The associate works non-traditional business hours including evenings, nights, weekends and holidays. May occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). Periodically exposed to high, precarious places. Sometimes exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job.

JOB SUMMARY This position serves our customers by hand-building pallets of product and loading product onto trailers according to established company and customer standards. RESPONSIBILITIES: Reads pick sheets and travel to proper warehouse locations using a pallet jack. Picks proper product type and quantity, labels products and places on a pallet and loads the pallet on trucks according to proper zone, location, and established standards. Handles products and build pallets according to established food safety procedures (e.g. visual inspection of the product for damages, proper placement on pallets to minimize cross-contamination and damage). Ensures that the warehouse is maintained cleanly and safely according to company standards; takes appropriate corrective actions when a spill or damaged case is discovered; disposes of trash and recycling in proper receptacles. Communicates with the management team regarding any issues (e.g. products, out of stocks, safety issues, food safety concerns). Operates all company warehouse equipment (e.g. forklifts, pallet jacks, scanners) safely, according to company standards. Reports all equipment issues to a member of the management team. Completes all paperwork and utilizes a wearable computer to properly track time spent on assignments for productivity reporting. Works assigned schedule exhibits regular and predictable attendance and works overtime as needed to meet workload demands. Perform related duties as assigned. . QUALIFICATIONS: Education High school diploma/GED/equivalent degree Experience 6 months of previous warehouse experience preferred; or equivalent work experience in place of a degree. Certificates, Licenses, and Registrations: Forklift and pallet jack license/certification preferred . Professional Skills: Knowledge of: safe lifting procedures, and food safety guidelines. Skill in: building pallets of products quickly, accurately and safely. Ability to: operate forklift and/or pallet jack and maneuver in tight areas. Meet the minimum productivity levels established by the company. Read, write and communicate in English as it relates to the job and safety regulations. Perform basic math functions (e.g. add, subtract, multiply, divide). Solve problems. Apply understanding to carry out instructions furnished in written, oral or diagram form. Wear personal protective equipment (e.g. safety shoes). Physical Demand The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The associate must regularly lift and /or move up to 50 - 90 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate is regularly exposed to hot, extreme cold and/or humid conditions; moving mechanical parts. The associate is frequently exposed to high, precarious places. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually loud. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and considers qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Shift: 11pm-7am Sunday -Thursday Payrate : $28.52/ HR Summary: Responsible for building less than full pallet quantity orders (by hand) and staging them at outbound door loading lanes. This function requires frequent lifting and specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals ESSENTIAL DUTIES AND RESPONSIBILITIES Layer Picking (Forklift Operator): Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, layer picking areas and storage areas) following established PWMs. Pull / Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). Use SWMS (Sysco Warehouse Management System) RF equipment to locate products for order building and accurate retrieval (for layer pick) following directed tasking and established PWMs. Build pallets in Ti/Hi configuration, label and confirm quantities and product (for layer pick) following directed tasking and established PWMs. Places older product on top of newer product for rotation purposes (date coded items) Count and label unused (residual) cases and return to correct slot (for layer pick) following directed tasking and established When carrying multiple pallets, pallets with heavier items should be transported on the bottom and pallets with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. All Functions: Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts, order pickers, and pallet jacks in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. SUPERVISORY RESPONSIBILITIES None QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. EDUCATION AND EXPERIENCE High school diploma or General Education Degree (GED) preferred; six months previous warehouse experience and/or training preferred. Material handling equipment experience preferred. Reach truck experience preferred. Crown and/or Raymond reach truck experience a plus. LANGUAGE SKILLS Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situation and to respond to questions from managers, associates, and peers. MATHEMATICAL SKILLS Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Certification on material handling equipment is required, or the ability to become certified. PHYSICAL REQUIREMENTS OF THE POSITION The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an associate encounter while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. WORK HOURS This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary, or change based on customer order, departmental or business requirements. TRAVEL The position does not require travel.

Shift : Day shift Monday-Thursday 6am-430pm Payrate : $23.05 / HR SUMMARY This position is responsible for all general warehouse functions including loading, receiving, put-away, stocking and selection of product and/or order packing when qualified and as needed. All functions with the exception of loading require specific equipment or process certification. ESSENTIAL DUTIES AND RESPONSIBILITIES Loading: Appropriately handle product to minimize damage during the loading process. Communicate any damage found or caused during the loading process to appropriate personnel. Inspect trailer cleanliness prior to loading. Ensure all packages meet warehouse standards before loading (no visible damage, boxes securely closed, address labels affixed and readable, etc.). Responsible for the neatness and cleanliness of the dock areas. Receiving: Appropriately handle product to minimize damage during unloading and receiving process. Accurately record product delivered as compared to the Bill of Lading/Receiving Worksheets and create appropriate OS&D (Over, Short & Damage) paperwork when necessary. Stage product efficiently for put-away. Communicate any damage found or caused during the unloading/receiving process to appropriate personnel. Must be certified on appropriate material handling equipment. Operate appropriate material handling equipment (MHE) such as forklifts, standup order selector and reach trucks in a safe and orderly manner in an effort to reduce accidents and injuries. Ensure that MHE is maintained (daily inspection) and clean. Report repair or service needs to supervisor in an effort to reduce equipment damage. Put-away/Stocking: Appropriately handle product to minimize damage during put-away and stocking process. Remove shrink wrap, bands, or tape when putting a pallet into a selection location as required. Accurately scan product and put product in correct slots. Communicate any damage found or caused during the put-away and stocking process to appropriate personnel. Must be certified on appropriate material handling equipment. Operate appropriate material handling equipment (MHE) such as forklifts, standup order selector and reach trucks in a safe and orderly manner in an effort to reduce accidents and injuries. Ensure that MHE is maintained (daily inspection) and clean. Report repair or service needs to supervisor in an effort to reduce equipment damage. Selecting: Appropriately handle product to minimize damage during the selection process. Accurately select product for outbound shipments. Accurately stage and notate float numbers on pallets. Communicate any damage found or caused during the selecting process to appropriate personnel. Must be certified on appropriate material handling equipment. Operate appropriate material handling equipment (MHE) such as forklifts, standup order selector and reach trucks in a safe and orderly manner in an effort to reduce accidents and injuries. Ensure that MHE is maintained (daily inspection) and clean. Report repair or service needs to supervisor in an effort to reduce equipment damage. Order Packing: Appropriately handle product to minimize damage during packaging process. Accurately sort, segregate and package product to be shipped to customers (both FedEx and LTL). Must be able to recognize products by name/packaging. Ensure all packages meet warehouse standards after packing (no visible damage, boxes securely closed, address labels affixed and readable, etc.). Must be certified on specific packing equipment and processes. All Functions: Work effectively with immediate supervisor to prevent warehouse shrink (product loss). Cross-train and work in other warehouse functions and areas which include loading, unloading, receiving, put-away, selecting, and packing on an as qualified and as needed basis. (See specific loading, receiving, put-away, selecting, or packing duties and responsibilities for specific details.) Responsible for the neatness and cleanliness of assigned work area. Report any unfixable/unsafe issues immediately to the supervisor. Observe and enforce all safety rules in an effort to reduce accidents and injuries. Observe proper lifting techniques and physical work practices as defined in the Preferred Work Methods documentation. Use warehouse computers and RF equipment in a safe and professional manner. Understand and comply with all applicable company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc.) Ensure compliance with all applicable State/Federal laws, regulations, and policies (i.e. OSHA (Occupational Health and Safety Administration), AIB (American Institute of Baking), etc.). Perform other warehouse duties as assigned. SUPERVISORY RESPONSIBILITIES None QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill set, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact the Human Resource representative or hiring manager if he or she believes that an accommodation is needed. Must be at least 18 years of age. Must have the ability to pass a post-offer functional capacity test. EDUCATION AND EXPERIENCE High school diploma or General Education Degree (GED) is preferred, or one year warehouse related experience and/or training, or equivalent combination of education and experience. LANGUAGE SKILLS Must have ability to read and comprehend basic instructions, short correspondence, and memos. Must have ability to read and write simple correspondence, and to speak effectively in one-on-one and in small group situations. MATHEMATICAL SKILLS Must have ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, and decimals. Must be able to compute rate, ratio, and percent. REASONING ABILITY Must be able to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Certification on material handling equipment is required, or the ability to become certified. PHYSICAL REQUIREMENTS OF THE POSITION The working conditions and physical demands described are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle, or feel objects, tools or controls. The associate is frequently required to stand and walk, reach with hands and arms, and talk or hear. The associate is required to walk and stoop, kneel, crouch, or sit. A MHE certified associate is frequently required to sit/stand on MHE equipment and must be comfortable with heights of up to 25 feet. The associate must frequently lift and/or move up to 40 pounds, occasionally lift and/or move between 41 and 55 pounds, and selfdom lift and/or move 56 pounds and up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job duties are performed in a warehouse environment. While performing the duties of this job, the associate is regularly exposed to fast moving material handling equipment or other mechanical equipment. The associate is frequently exposed to variable temperatures and humid conditions, vehicle emissions; and is infrequently exposed to contained toxic or caustic chemicals. The noise level in the work environment usually is loud. WORK HOURS This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order requirements. TRAVEL The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Shift: Night Shift 11pm-7am Sunday -Thursday Payrate: $24.81/ HR SUMMARY Responsible for unloading and loading product onto and from trailers when qualified and as needed in accordance with Preferred Work Methods (PWMs). Both functions require specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals ESSENTIAL DUTIES AND RESPONSIBILITIES Inspect inbound trailer for cleanliness prior to unloading. Communicate any unsanitary conditions to supervisor. Communicate inbound load, product, or pallet issues to supervisor. Unload inbound foodservice product, supplies or equipment from trailers or shipping containers onto the dock for receipt utilizing material handling equipment following established PWMs to avoid damage to equipment or product, and according to specified configurations for storage and shipment. Reconfigure inbound pallets to meet RDC storage requirements (floor or slip sheet loads). Verify refrigerated (cooler) and frozen product temperatures on inbound loads are taken according to established PWMs. Follow temperature abuse process and established PWMs if product temperature is out of accepted tolerance range. Apply shrink wrap to all lumped pallets to ensure they are secured for effective delivery following established PWMs. Apply shrink wrap to other pallets as needed to secure product for storage and shipment. Inspect and clean trailers prior to loading. Inspect all (inbound and outbound) product being moved for shortages, damage, quality issues, or deterioration of packing and report to supervisor. Load product onto trucks corresponding to truck mapping and to any special instructions; according to established PWMs to avoid damage to product or equipment and to maintain load stability and balance to ensure driver safety. Hand load product onto trucks as required. Control door lights to inform driver if they are clear to position trailer to the door or pull trailer from the door. Must successfully complete the forklift certification process and testing and be able to perform the established PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts, order pickers, and pallet jacks in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e., attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e., OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. SUPERVISORY RESPONSIBILITIES None QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. EDUCATION AND EXPERIENCE High school diploma or General Education Degree (GED) preferred; six months previous warehouse experience and/or training preferred. Material handling equipment experience preferred. Reach truck experience preferred. Crown and/or Raymond reach truck experience a plus. LANGUAGE SKILLS Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situation and to respond to questions from managers, associates, and peers. MATHEMATICAL SKILLS Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Certification on material handling equipment is required, or the ability to become certified. See testing and certification requirements noted within the Essential Duties. PHYSICAL REQUIREMENTS OF THE POSITION The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch, or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an associate encounter while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. WORK HOURS This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary, or change based on customer order, departmental or business requirements. TRAVEL The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Adecco is assisting a manufacturing company in Fitzwilliam, NH with hiring a Production Associate / Fabricator on 1st shift. This is a hands-on position working in a production environment where you will help build and finish high-quality products. If you enjoy working with your hands, take pride in your work, and are looking for a long-term opportunity with growth potential, we encourage you to apply! Position: Production Associate / Fabricator Shift: 1st Shift Monday - Thursday 6:00 AM - 4:30 PM Overtime available on Fridays Pay: $20.00 - $22.00 per hour Job Duties: • Fabricate, assemble, and finish fiberglass products • Work with molds, resins, and composite materials • Use hand and power tools to complete production tasks • Inspect finished products to ensure quality standards are met • Follow work instructions and production schedules • Move materials throughout the facility as needed • Maintain a clean and safe work environment • Assist with additional production duties as assigned Requirements: • Ability to lift up to 50 pounds repeatedly throughout the shift • Strong attention to detail and commitment to quality • Mechanical aptitude and ability to use hand tools • Valid driver's license required • Ability to work in a fast-paced manufacturing environment • Reliable attendance and strong work ethic Preferred Experience: • Manufacturing or production experience • Fiberglass, composite, or plastic fabrication • Mechanical, automotive, or construction experience • Skilled trades experience If you are interested in this position, please apply using the link provided and be sure to include an updated resume. Pay Details: $20.00 to $22.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Diesel Mechanic Full Time 2nd or 3rd Shifts Available Based Upon Operational Needs Location: Hanover, MD Compensation: Mechanic C Starting at $59,000 Mechanic A & B $65,000 - $85,000 Looking for a new and exciting career? Join the Coach USA maintenance team in Hanover! Dillon's Bus Lines, LLC, Maryland's premier motor coach company, has new and exciting career opportunities for Full Time Diesel Mechanics for its Hanover, MD location under the direct supervision of the Maintenance Manager. Our Diesel Mechanics play a vital role, where gears meet grit, and power meets precision. Armed with an arsenal of tools and a mind sharp with diagnostic prowess, they are the unsung heroes who keep the wheels of progress spinning. If you're passionate about keeping buses running smoothly and ensuring passenger safety, we want you on board! We Offer: Health Care (FREE FOR SINGLE COVERAGE), Dental, Vision Insurance, and more Term life insurance (company paid and voluntary) 401(k) plan Generous Paid time off Employee Assistance Program "EAP" Free membership for "Tickets at Work" for exclusive employee deals Growth Opportunities with one of the largest privately held transportation companies in North America. Paid Weekly Required Experience: Class A: Master Mechanic with 5 years' experience on trucks, buses, or heavy equipment Class B: Mid-Level with 3 years' experience on trucks, buses, or heavy equipment Class C: Low Level with at least 1 year of experience on trucks, buses, or heavy equipment Minimum Requirements: Formal technical training degree, certificate or diploma or equivalent work experience. Ability to bend, stoop, crawl, walk and sit on a regular basis with frequent lifting of up to 50 pounds. Certification Experience Counts: Have the necessary toolkit to carry out maintenance duties independently. Experience in the Motor Coach Industry or Diesel experience preferred. CDL preferred Effective written and oral communication skills. Diagnose and Repair: Utilize diagnostic tools to identify issues with mechanical, electrical, and other breakdowns and failures, performing necessary repairs. Preventative Maintenance: Conduct routine and preventative maintenance according to manufacturers' specifications to ensure vehicle reliability and longevity. Quality Assurance: Uphold our commitment to excellence by ensuring all repairs and maintenance work meets or exceeds industry standards. Complete test drives to make sure all repaired vehicles run correctly and safely. Detail Oriented: Write detailed inspection reports and repair plans. Maintain electronic maintenance logs. Safety and Cleanliness: Adhere to all workplace safety policies and procedures, while maintaining a clean and safe work environment. Problem Solvers: You are adept at troubleshooting and enjoy the challenge of finding and implementing solutions to mechanical issues. Computer diagnostic skills a plus, but training is provided. Team Players: Ability to work in all weather conditions, including outdoors. Willingness to work weekends and holidays, as needed. Don't miss this opportunity to shift your career into overdrive with a team that values the hard work and dedication of its diesel mechanics. At Coach USA, you're not just repairing buses; you're ensuring that our community stays connected, efficiently and safely. To learn more about your next big career change! APPLY NOW! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class. "lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"

Description Summary: Assesses and treats neuromusculoskeletal & cardiorespiratory systems by physical or mechanical means to maintain or restore function that has been impaired by injury or disease, for pain management and for promotion of mobility and health as prescribed by the referring physician. Is responsible for developing, implementing and monitoring the plan of care for the person served. Performs and directs administration of all physical therapy modalities & collaborates throughout the process with the patient and their family and the interdisciplinary team. Responsibilities: Verifies physician orders prior to evaluation. Evaluates each patient before administering treatments, incorporating psychological and physical issues. Evaluations must include thorough reading of patient's chart & history; may include objective measurements relative to the patients diagnosis and condition. Completes the evaluation & establishes goals and plan of care in collaboration with the patient, his/her family and other healthcare workers as appropriate. Administers and directs administration of all Physical Therapy treatment & modalities. Has knowledge of indications and contraindications. Calls the physician if treatment ordered is not indicated. Acquisitions appropriate equipment, checks equipment being used for safety, and communicates the evaluation, treatment procedures and the use of the specific equipment to patient and family. Applies or supervises appropriate treatments or modalities such as therapeutic exercises, hot moist packs, cryotherapy, ultrasound, electrical stimulation, continuous passive motion, paraffin, soft tissue mobilization, gait training, balance training and functional mobility training. Checking frequently with patient for tolerance of modality given. Maintains contact with the referring physician regarding patient progress. Observes treatment effects & recommends changes to physician if indicated. Assembles, organizes home programs for patients whenever indicated. Explains the program to patient, asking for return demonstrations and trains the family whenever indicated. Directs and oversees PT Assistants and Rehabilitation Assistants during physical therapy treatments. Participates with on-the-job training of rehabilitation personnel. Maintains records of all patient treatments as required, information must include but is not limited to, subjective & objective information, assessment and plan for each treatment given or specific documentation for a specific area in which the therapy if provided. The Physical Therapist approves and co-signs every progress note written by a PT/PT Assistant with temporary licensure. The Physical Therapist completes the discharge summary and sends them to the referring physician if indicated. Promotes the team approach to delivery of rehabilitation services, while serving as a representative in the field of Physical Therapy. In collaboration with the rehabilitation team, develops and implements measures for quality assurance and participates in performance improvement activities. Maintains professional competence through continuing education and participation in appropriate professional groups. Obtains professional continuing education requirements to maintain licensure. Ensures charges correlate with treatment session documentation and length of time in therapy. Maintains productivity standards. Requirements: Education: Doctorate, Masters, Bachelors or Associates Degree in Physical Therapy. Experience: Demonstrates accountability and skills in assessment/evaluation, decision-making and time management. Should have strong interpersonal, verbal and written communication and organizational skills. Certifications, Registrations, or Licenses: Current New Mexico Physical Therapist licensure BLS certification required. Work Schedule: MULTIPLE SHIFTS AVAILABLE Work Type: Full Time

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. San Diego and Carlsbad Career Fair Date: Thursday, June 25th, 2026 Time: 9am-12pm and 3pm-6pm Career Fair Location: Hampton Inn - 14068 Stowe Drive Poway, Ca. 92064 Are you ready to take your career to new heights? L3Harris is a leading name in aerospace and defense, particularly recognized for our contributions in propulsion and energetics for space, missile defense, and other advanced programs. This career fair is your chance to engage directly with our hiring managers and interview on-the-spot! We are seeking talented and experienced candidates for numerous full-time positions in our thriving CSD segment. If you are passionate about innovation and excellence, this event is for you! We will be interviewing and hiring for various positions across multiple shifts, including: Electrical Engineering Mechanical Engineering Project Engineering Systems Engineering Software Engineering Systems Engineering Contracts Information Security Systems Engineer Program Management Program Finance/Financial Analyst Click 'APPLY NOW' to confirm your attendance. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Adecco is assisting a manufacturing company in Fitzwilliam, NH with hiring a Production Associate / Fabricator on 1st shift. This is a hands-on position working in a production environment where you will help build and finish high-quality products. If you enjoy working with your hands, take pride in your work, and are looking for a long-term opportunity with growth potential, we encourage you to apply! Position: Production Associate / Fabricator Shift: 1st Shift Monday - Thursday 6:00 AM - 4:30 PM Overtime available on Fridays Pay: $20.00 - $22.00 per hour Job Duties: • Fabricate, assemble, and finish fiberglass products • Work with molds, resins, and composite materials • Use hand and power tools to complete production tasks • Inspect finished products to ensure quality standards are met • Follow work instructions and production schedules • Move materials throughout the facility as needed • Maintain a clean and safe work environment • Assist with additional production duties as assigned Requirements: • Ability to lift up to 50 pounds repeatedly throughout the shift • Strong attention to detail and commitment to quality • Mechanical aptitude and ability to use hand tools • Valid driver's license required • Ability to work in a fast-paced manufacturing environment • Reliable attendance and strong work ethic Preferred Experience: • Manufacturing or production experience • Fiberglass, composite, or plastic fabrication • Mechanical, automotive, or construction experience • Skilled trades experience If you are interested in this position, please apply using the link provided and be sure to include an updated resume. Pay Details: $20.00 to $22.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Automotive Service Advisor Spitzer Motors of Mansfield is looking for an experienced Service Advisor to join their industry-leading service team! Start your career with Spitzer today! Job Responsibilities: Consult and interpret customer needs for the mechanics Serve as the primary point of contact for all automotive service and repair matters Understand customers' problems and arrange for appropriate service Prioritize required services, and offer options Set and manage the expectations of the service delivery for both the customers and mechanics Continuously keep the customer updated on repair needs and completion times Job Requirements: 1+ year experience as Service Advisor preferred Exemplary customer service skills are a must Previous Service Advisor experience a plus ADP or Reynolds and Reynolds experience highly preferred Valid driver's license Dealership Benefits: Competitive wages Training Health, Dental, Vision, Life, Short and Long Term Disability Insurance 401k Paid time off Professional working environment Start your career with Spitzer. Apply today!

C3 Mechanic Full-Time Location: Chester, NY Compensation: $28.22 up to $34.23 based on experience Now Hiring! Coach USA is looking for Maintenance Mechanics of all levels to join our Chester, NY location. Under the supervision of the Maintenance Manager a Maintenance Mechanic performs highly skilled preventative maintenance, and diagnostic and repair work on motor coaches to minimize downtime and ensure a positive customer experience. What we offer: Paid weekly/Direct deposit Medical, Dental, Vision Flexible Spending Account ($3,300) Dependent Care Spending Account (Daycare $5000) Company-sponsored Life insurance ($100k) 401k Retirement Plan with Company match Vacation 10 Paid Holidays 7 PTO Floating Holidays Birthday Tool/Boot Allowance annually Employee Discounts through LifeMart and Tickets at Work (Travel, Hotels, Car Rentals, Theme Parks, Electronics, Childcare and more ) Save up to 15% on Verizon Wireless Bill with Employee Discount Samsung HUSK Marketplace (discounts on Fitness, Nutrition, Mental Health, and more) Perfect Attendance $100 (every 6 months) Union Shop Garage Kept buses Responsibilities: Inspect, diagnosis and replace components on Motor Coaches as needed Minor body work as needed PMI repairs Utilize most specialized purpose shop tools, such as steam cleaners, grease guns, as needed Performs other duties Qualifications: High Schools Diploma Able to work in all types of weather conditions, including outdoors Must meet DOT Physical Qualifications, pass pre-employment drug screen/background check CDL A/B with Passenger and Air Brake Endorsements Must be able to attend training when directed Coach USA would love to discuss your qualifications for this position. To learn more about your next big career change! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class. "lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "auto mechanic", technical", "entry level mechanic"

JOB SUMMARY This is an Operations position responsible for moving trucks and trailers in and out of dock doors for loading and unloading. RESPONSIBILITIES Collaborates with the loaders and supervision to move trucks and trailers from one location to another according to door assignments. Checks to ensure that each unit is sealed and that the refrigeration unit is operating correctly and running. Moves trucks and trailers from dock to dock as needed to complete the loading process which includes dropping and hooking trailers. Ensures the trailer or truck is completely loaded and secured before moving from the dock area. Works with transportation management to ensure the proper equipment is used on the proper route. Works closely with fleet shop management to ensure any repairs are finished before using the equipment. Helps keep truck parking yard free of debris and trash. Arranges trucks and trailers on the yard in an orderly and efficient manner. Moves trucks and trailers for receiving when needed. Records start up time and reefer set points for pre-cooling purposes Ensures trailer doors are closed while not in the dock The following duties may also be required at the site: Check oil and fluid levels. Fueling trucks and trailers. Wash out trailers. Check lights/hoses/tires. QUALIFICATIONS Education Less than high school education. Experience 1 year of warehouse or transportation experience preferred. Truck backing experience preferred. Certificates, Licenses, and Registrations Valid driver's license required. Pallet Jack and Forklift Certification from Sysco. Can obtain once hired into the role. Professional Skills Able to communicate efficiently with others in a proficient manner Can add, subtract, multiply and divide into all units of measure, using whole numbers, common fractions, and decimals. Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Deal with problems involving several concrete variables in standardized situations. Adapts to changes in the work environment. Follows instructions, and responds to management direction. Takes responsibility for own actions. Inspires the trust of others. Works with integrity and ethically. Upholds organizational values. Asks for and offers help when needed. Focuses on solving conflict, not blaming. Demonstrates persistence and overcomes obstacles. Measures self against standard of excellence. Follows policies and procedures. Uses time efficiently. Tactfully approaches others. Demonstrates accuracy and thoroughness. Looks for ways to improve and promote quality. Applies feedback to improve performance. Observes safety and security procedures. Uses equipment and materials properly. Contributes to building a positive team spirit. Able to build morale and group commitments to goals and objectives. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Regularly required to stand; walk, bend; use hands to finger, handle, or feel; reach with hands and arms; talk and hear. Climb into trailers and tractors. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly exposed to wet and/or humid conditions; moving mechanical parts and all weather conditions. Occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job.