JOB SUMMARY This is an Operations position responsible for performing/managing routine and high-level maintenance duties and other jobs assigned. Assists with material handling equipment and facility repairs. RESPONSIBILITIES Each employee is responsible for the food safety and quality of our products. Independently perform semi-skilled preventive, corrective and predictive maintenance on various types of equipment and machinery within the facility, as noted in the equipment manufacturer's guidelines Perform complex troubleshooting and repairs on low/high voltage electrical power and control systems, bearings, sprockets, motors, belts and other moving parts Respond to emergency maintenance requests; troubleshoot to determine root cause and solution Inspect equipment and perform preventive maintenance Assemble, install, replace, repair, modify and adjust all types of small operating equipment Disassemble equipment, replace parts, relocate and reassemble equipment Direct work of Tech I and Tech II Crew Members; instruct on equipment repair/maintenance Able to work night shift and occasional weekends Complete other duties as assigned. Other Functions and Responsibilities: Apply common sense understanding to carry out instructions furnished in written and oral form. Know and understand the company's safety and health goals and its objectives. Assist the company in achieving goals by participating in the safety program. Demonstrate proper operation of equipment and tools as needed to ensure employee safety and compliance with all OSHA guidelines. Provide management with written reports of unsafe conditions or unsafe acts as needed. Report all accidents, injuries, or illnesses immediately. Troubleshooting: Able to determine causes of operating errors and decide on the most effective and efficient course of action to repair Mechanical Ability: Must be able to read and understand all electrical and mechanical schematics and diagrams. Repairing: Ability to work on equipment or systems using various types of hand tools, measuring, and testing instruments, etc. Equipment Maintenance: Able to perform routine preventative maintenance on equipment and determine the proper type of corrective maintenance needed. Tool Use and Organization: Maintain tools and maintenance equipment in working order and maintenance room and work areas in neat condition. QUALIFICATIONS Education High school diploma or GED Must have knowledge of single and three phases electric, AC, DC high and low voltages. Experience 8+ years of experience in facility maintenance/preventative equipment maintenance Food Processing Equipment: Experience with Food Processing Equipment is a plus. Vacuum Packaging: Experience with RollStock and Repack machines is a plus. Skills Possess the ability to learn various software programs associated with the facility. Possess strong technical, mechanical, and analytical skills. Possess the ability to interact and communicate with all staff and management in English. Able to deal with difficult situations, resolve issues and concerns in a professional manner. Physical Requirements While performing the duties of this job, the employee is regularly required to stand, walk, stoop, kneel crouch, climb, use ladders, and perform various types of manual labor. Occasionally, the employee may be required to lift to 70 pounds sometimes. While performing the duties of this job, the employee is regularly exposed to extreme heat and cold temperatures and sometimes wet conditions.
07/28/2026
Full time
JOB SUMMARY This is an Operations position responsible for performing/managing routine and high-level maintenance duties and other jobs assigned. Assists with material handling equipment and facility repairs. RESPONSIBILITIES Each employee is responsible for the food safety and quality of our products. Independently perform semi-skilled preventive, corrective and predictive maintenance on various types of equipment and machinery within the facility, as noted in the equipment manufacturer's guidelines Perform complex troubleshooting and repairs on low/high voltage electrical power and control systems, bearings, sprockets, motors, belts and other moving parts Respond to emergency maintenance requests; troubleshoot to determine root cause and solution Inspect equipment and perform preventive maintenance Assemble, install, replace, repair, modify and adjust all types of small operating equipment Disassemble equipment, replace parts, relocate and reassemble equipment Direct work of Tech I and Tech II Crew Members; instruct on equipment repair/maintenance Able to work night shift and occasional weekends Complete other duties as assigned. Other Functions and Responsibilities: Apply common sense understanding to carry out instructions furnished in written and oral form. Know and understand the company's safety and health goals and its objectives. Assist the company in achieving goals by participating in the safety program. Demonstrate proper operation of equipment and tools as needed to ensure employee safety and compliance with all OSHA guidelines. Provide management with written reports of unsafe conditions or unsafe acts as needed. Report all accidents, injuries, or illnesses immediately. Troubleshooting: Able to determine causes of operating errors and decide on the most effective and efficient course of action to repair Mechanical Ability: Must be able to read and understand all electrical and mechanical schematics and diagrams. Repairing: Ability to work on equipment or systems using various types of hand tools, measuring, and testing instruments, etc. Equipment Maintenance: Able to perform routine preventative maintenance on equipment and determine the proper type of corrective maintenance needed. Tool Use and Organization: Maintain tools and maintenance equipment in working order and maintenance room and work areas in neat condition. QUALIFICATIONS Education High school diploma or GED Must have knowledge of single and three phases electric, AC, DC high and low voltages. Experience 8+ years of experience in facility maintenance/preventative equipment maintenance Food Processing Equipment: Experience with Food Processing Equipment is a plus. Vacuum Packaging: Experience with RollStock and Repack machines is a plus. Skills Possess the ability to learn various software programs associated with the facility. Possess strong technical, mechanical, and analytical skills. Possess the ability to interact and communicate with all staff and management in English. Able to deal with difficult situations, resolve issues and concerns in a professional manner. Physical Requirements While performing the duties of this job, the employee is regularly required to stand, walk, stoop, kneel crouch, climb, use ladders, and perform various types of manual labor. Occasionally, the employee may be required to lift to 70 pounds sometimes. While performing the duties of this job, the employee is regularly exposed to extreme heat and cold temperatures and sometimes wet conditions.
Please read all the requirements for the Warehouse Manager I position listed below Location Transition : This position will initially report to our Socorro, NM location, with a planned transition to our new Albuquerque, NM location in Fall 2026. Application Limit : This posting will close after the first 100 qualified applications have been received. Work Authorization : EarthScope Consortium Inc. is not able to sponsor employment visas for this position. Work Location Eligibility : Applicants must be authorized to work and physically reside within the 50 United States. EarthScope is only able to employ individuals working within these states. Job Title: Warehouse Manager I Reports to: Engineering Manager III, Facilities Operations Employment/FLSA Status: Full-Time/Exempt On-Site Monday-Friday: Socorro, New Mexico. U.S. and transition to a new Albuquerque, NM location in FALL 2026 Travel Requirements: Up to 30% through Sept 2026, afterwards; Up to 30% Salary Range: $74,000 - $90,000 (depending on experience, skills, and qualifications relative to the job requirements) Benefits and Perks: Comprehensive Medical Plan Covering Medical, Dental, Vision Short Term and Long-Term Disability Coverage 403(b) Plan with Company Match Life Insurance PTO, Paid Holidays Position Summary The Warehouse Manager I is responsible for planning, organizing, and implementing safe and effective operations of the assigned EarthScope warehouse, including coordination of preventative and corrective maintenance of the facility executing shipping and receiving and inventory management. The Warehouse Manager I is accountable for all Government property, company-owned property and EarthScope instrumentation, engagement, and administrative inventory on behalf of EarthScope Consortium, Inc. Details of Responsibilities General Essential Job Duties: Responsibility for formal accounting and managing government property. Coordinates with the Facilities Manager for developing reports for government sponsors in specific format with regards to changes in property, disposition requests, etc., as required by policy and OMB standards, for review. Conducts annual inventory of property in coordination with all EarthScope facilities and assists in reconciliation with accounting personnel. Arrange transport for all shipments from the assigned facility. Track and confirm delivery of all outgoing and incoming shipments. Ensure all incoming equipment is received, inspected and stored properly including EarthScope barcoding and entry into the property database, as appropriate. Maintain and monitor accuracy of inventory database. Assist technicians and engineers in equipment preparation including coordination of packaging and staging for experiment shipments and for shipments of network operations supplies. Operate warehouse equipment safely Develops, updates and maintains standard operating procedures for warehouse operations, shipment processing and compliance activities Maintain OSHA compliance in warehouse operations through required safety supplies, regular documented inspections and adherence to established safety protocols Responsible for maintenance of warehouse, security, and general housekeeping. Other duties may be assigned as necessary for the successful operation of the business. Leadership and Supervisory Responsibilities: May supervise Warehouse Coordinators. May supervise part-time student workforce team to assist in warehouse operations and shipping/receiving tasks. Interact effectively and efficiently with staff, community, and partnering organizations in support of Instrumentation and other activities. Work with external vendors and community members to arrange services and/or procure supplies. Foster a professional culture through the use of strong interpersonal skills, verbal and written communications. Communicate clearly and effectively with other team members to ensure tasks are completed on time and with best practices. Collaborate with all team members to ensure the warehouse facility and all related activities are properly coordinated and completed. Qualifications Minimum Education & Experience Requirements: High school diploma, GED or equivalent. At least six (6) years of experience in warehouse and inventory management including staff supervision Experience in tracking and reporting government and company property. Mastery of inventory tools and their implementation. One or more of the following certifications: Hazardous materials, IATA/Lithium battery handling OSHA Lift Truck Operator Preferred Skills: Bachelor's degree or equivalent professional experience in business, logistics or related field. Assignment-specific Position Summary This position manages warehouse operations at the EarthScope Primary Instrument Center (EPIC) in New Mexico, balancing responsibilities across international shipping compliance, warehouse organization and space management, shipment processing, and inventory and property accountability. The Warehouse Manager I ensures the safe, compliant, and efficient operations of the facility, accurate documentation in coordination with EarthScope's inventory and compliance requirements, and effective processing of inbound and outbound shipments. This role also carries responsibility for training and knowledge sharing with Operations staff across multiple facilities to strengthen organizational capacity in logistics and trade compliance. Assignment-specific Essential Duties: Functional responsibilities: Reports to and is supervised by the Engineering Manager III - IS Facilities Manager. Prepares and reviews export/import documentation, including bills of lading, commercial invoices, and customs declarations. Classifies goods under the Harmonized Tariff Schedule (HTS) and ensures correct identification of country of origin, valuation, and tariff codes. Monitors and maintains compliance records for shipments and assists with audits, self-checks, and corrective actions. Tracks regulatory changes (customs, EAR, ITAR, and related U.S. import/export laws) and coordinates with the EarthScope Compliance Team when applicable. Coordinates with freight forwarders, customs brokers, and internal departments to ensure timely, accurate, and compliant shipments. Provides training and shares compliance knowledge with Operations staff across EarthScope facilities. Maintains OSHA compliance in warehouse operations through required safety supplies, regular inspections, and adherence to established safety protocols. In collaboration with all EarthScope Warehouse Managers, develops, updates, and maintains standard operating procedures (SOPs) for warehouse operations, shipment processing, and compliance activities. Performs core warehouse duties, including receipt and preparation of shipments, coordination of packaging and staging, and tracking and confirmation of delivery for all inbound and outbound shipments. Reports on changes in equipment status and supports disposition requests, as required by policy and OMB standards, for review by IS Facilities Operations Manager. Develops data and reports, as requested by the IS Facilities Manager, related to government property. Provides functional supervision to the EPIC Operations group Warehouse subunit. Represents Warehouse subunit resource requirements and status to functional manager in support of monthly management resource allocations meetings. Reports on workload balance for all direct reports. Oversees subaward employees, including students. Ensure that the team properly accounts for time between all supported programs. Provides input to hiring managers and supports the resource hiring process - as appropriate to this functional group. Other duties may be assigned as necessary for the successful operation of the business. Programmatic responsibilities: Manages Import/Export coordination for all EarthScope programs and projects in coordination with the EMIII - IS Facilities Manager. Ensures property accountability and inventory updates in compliance with OMB and NSF requirements. Contributes to continuous improvement of international trade compliance processes and documentation practices across IS facilities. Coordinates programmatic responsibilities through appropriate program managers and assigned task leaders. Participates in team-based review of Import/Export policy changes and ensures proposed changes are vetted through the EarthScope Compliance Officer prior to implementation. Supports all Programs under the NGF. Other: Advance approval from your functional manager and the VP, Instrumentation is required for any physical relocation that changes your proximity to your assigned duty station. Assignment-specific Knowledge, Skills, & Abilities: . click apply for full job details
07/27/2026
Full time
Please read all the requirements for the Warehouse Manager I position listed below Location Transition : This position will initially report to our Socorro, NM location, with a planned transition to our new Albuquerque, NM location in Fall 2026. Application Limit : This posting will close after the first 100 qualified applications have been received. Work Authorization : EarthScope Consortium Inc. is not able to sponsor employment visas for this position. Work Location Eligibility : Applicants must be authorized to work and physically reside within the 50 United States. EarthScope is only able to employ individuals working within these states. Job Title: Warehouse Manager I Reports to: Engineering Manager III, Facilities Operations Employment/FLSA Status: Full-Time/Exempt On-Site Monday-Friday: Socorro, New Mexico. U.S. and transition to a new Albuquerque, NM location in FALL 2026 Travel Requirements: Up to 30% through Sept 2026, afterwards; Up to 30% Salary Range: $74,000 - $90,000 (depending on experience, skills, and qualifications relative to the job requirements) Benefits and Perks: Comprehensive Medical Plan Covering Medical, Dental, Vision Short Term and Long-Term Disability Coverage 403(b) Plan with Company Match Life Insurance PTO, Paid Holidays Position Summary The Warehouse Manager I is responsible for planning, organizing, and implementing safe and effective operations of the assigned EarthScope warehouse, including coordination of preventative and corrective maintenance of the facility executing shipping and receiving and inventory management. The Warehouse Manager I is accountable for all Government property, company-owned property and EarthScope instrumentation, engagement, and administrative inventory on behalf of EarthScope Consortium, Inc. Details of Responsibilities General Essential Job Duties: Responsibility for formal accounting and managing government property. Coordinates with the Facilities Manager for developing reports for government sponsors in specific format with regards to changes in property, disposition requests, etc., as required by policy and OMB standards, for review. Conducts annual inventory of property in coordination with all EarthScope facilities and assists in reconciliation with accounting personnel. Arrange transport for all shipments from the assigned facility. Track and confirm delivery of all outgoing and incoming shipments. Ensure all incoming equipment is received, inspected and stored properly including EarthScope barcoding and entry into the property database, as appropriate. Maintain and monitor accuracy of inventory database. Assist technicians and engineers in equipment preparation including coordination of packaging and staging for experiment shipments and for shipments of network operations supplies. Operate warehouse equipment safely Develops, updates and maintains standard operating procedures for warehouse operations, shipment processing and compliance activities Maintain OSHA compliance in warehouse operations through required safety supplies, regular documented inspections and adherence to established safety protocols Responsible for maintenance of warehouse, security, and general housekeeping. Other duties may be assigned as necessary for the successful operation of the business. Leadership and Supervisory Responsibilities: May supervise Warehouse Coordinators. May supervise part-time student workforce team to assist in warehouse operations and shipping/receiving tasks. Interact effectively and efficiently with staff, community, and partnering organizations in support of Instrumentation and other activities. Work with external vendors and community members to arrange services and/or procure supplies. Foster a professional culture through the use of strong interpersonal skills, verbal and written communications. Communicate clearly and effectively with other team members to ensure tasks are completed on time and with best practices. Collaborate with all team members to ensure the warehouse facility and all related activities are properly coordinated and completed. Qualifications Minimum Education & Experience Requirements: High school diploma, GED or equivalent. At least six (6) years of experience in warehouse and inventory management including staff supervision Experience in tracking and reporting government and company property. Mastery of inventory tools and their implementation. One or more of the following certifications: Hazardous materials, IATA/Lithium battery handling OSHA Lift Truck Operator Preferred Skills: Bachelor's degree or equivalent professional experience in business, logistics or related field. Assignment-specific Position Summary This position manages warehouse operations at the EarthScope Primary Instrument Center (EPIC) in New Mexico, balancing responsibilities across international shipping compliance, warehouse organization and space management, shipment processing, and inventory and property accountability. The Warehouse Manager I ensures the safe, compliant, and efficient operations of the facility, accurate documentation in coordination with EarthScope's inventory and compliance requirements, and effective processing of inbound and outbound shipments. This role also carries responsibility for training and knowledge sharing with Operations staff across multiple facilities to strengthen organizational capacity in logistics and trade compliance. Assignment-specific Essential Duties: Functional responsibilities: Reports to and is supervised by the Engineering Manager III - IS Facilities Manager. Prepares and reviews export/import documentation, including bills of lading, commercial invoices, and customs declarations. Classifies goods under the Harmonized Tariff Schedule (HTS) and ensures correct identification of country of origin, valuation, and tariff codes. Monitors and maintains compliance records for shipments and assists with audits, self-checks, and corrective actions. Tracks regulatory changes (customs, EAR, ITAR, and related U.S. import/export laws) and coordinates with the EarthScope Compliance Team when applicable. Coordinates with freight forwarders, customs brokers, and internal departments to ensure timely, accurate, and compliant shipments. Provides training and shares compliance knowledge with Operations staff across EarthScope facilities. Maintains OSHA compliance in warehouse operations through required safety supplies, regular inspections, and adherence to established safety protocols. In collaboration with all EarthScope Warehouse Managers, develops, updates, and maintains standard operating procedures (SOPs) for warehouse operations, shipment processing, and compliance activities. Performs core warehouse duties, including receipt and preparation of shipments, coordination of packaging and staging, and tracking and confirmation of delivery for all inbound and outbound shipments. Reports on changes in equipment status and supports disposition requests, as required by policy and OMB standards, for review by IS Facilities Operations Manager. Develops data and reports, as requested by the IS Facilities Manager, related to government property. Provides functional supervision to the EPIC Operations group Warehouse subunit. Represents Warehouse subunit resource requirements and status to functional manager in support of monthly management resource allocations meetings. Reports on workload balance for all direct reports. Oversees subaward employees, including students. Ensure that the team properly accounts for time between all supported programs. Provides input to hiring managers and supports the resource hiring process - as appropriate to this functional group. Other duties may be assigned as necessary for the successful operation of the business. Programmatic responsibilities: Manages Import/Export coordination for all EarthScope programs and projects in coordination with the EMIII - IS Facilities Manager. Ensures property accountability and inventory updates in compliance with OMB and NSF requirements. Contributes to continuous improvement of international trade compliance processes and documentation practices across IS facilities. Coordinates programmatic responsibilities through appropriate program managers and assigned task leaders. Participates in team-based review of Import/Export policy changes and ensures proposed changes are vetted through the EarthScope Compliance Officer prior to implementation. Supports all Programs under the NGF. Other: Advance approval from your functional manager and the VP, Instrumentation is required for any physical relocation that changes your proximity to your assigned duty station. Assignment-specific Knowledge, Skills, & Abilities: . click apply for full job details
SIGN ON BONUS - UPTO $7,000 Pay: $30 - $40per hour (based on experience) Shift Availability: 4/10hr shifts Tuesday - Friday Shift Differential: Yes, $3 per hour $700 annual tool allowance Outstanding benefits package: Full time career opportunity with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
SIGN ON BONUS - UPTO $7,000 Pay: $30 - $40per hour (based on experience) Shift Availability: 4/10hr shifts Tuesday - Friday Shift Differential: Yes, $3 per hour $700 annual tool allowance Outstanding benefits package: Full time career opportunity with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Pay: $22.93-$28.65 per hour, depending on certifications and experience Shift Available: Monday-Friday, 8:00 AM - 4:30 PM Annual Tool Allowance: Available Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
Pay: $22.93-$28.65 per hour, depending on certifications and experience Shift Available: Monday-Friday, 8:00 AM - 4:30 PM Annual Tool Allowance: Available Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
JOB SUMMARY This is an Operations position responsible for overseeing the safe operation, daily monitoring, and maintenance activities associated with Material Handling Equipment (MHE), and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Proficient in electrical meter testing Knowledge of controls and electric (AC - alternative current & DC - direct current low voltage) Understanding and working knowledge of PLC's (programming logic controller) and PLC troubleshooting Motors and Motor starter knowledge (AC & DC) Motor starter knowledge Contactor and relay knowledge and repair Complete electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet, checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, PM per manufacturers recommendations Knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems Knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanisms, steering systems, suspension systems Completes all special projects associated with building or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries, perform all other duties as assigned Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation Train and mentor MHE Tech I and II QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Six years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved a defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Trade electrical I & II training (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
JOB SUMMARY This is an Operations position responsible for overseeing the safe operation, daily monitoring, and maintenance activities associated with Material Handling Equipment (MHE), and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Proficient in electrical meter testing Knowledge of controls and electric (AC - alternative current & DC - direct current low voltage) Understanding and working knowledge of PLC's (programming logic controller) and PLC troubleshooting Motors and Motor starter knowledge (AC & DC) Motor starter knowledge Contactor and relay knowledge and repair Complete electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet, checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, PM per manufacturers recommendations Knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems Knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanisms, steering systems, suspension systems Completes all special projects associated with building or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries, perform all other duties as assigned Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation Train and mentor MHE Tech I and II QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Six years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved a defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Trade electrical I & II training (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
JOB SUMMARY: The Production Technician III role is essential for supporting the operations team and is responsible for planning and performing highly diversified duties to include installing, moving, repairing and preventive maintenance on production equipment throughout the facility. Perform 5S and Lean manufacturing activities including material handling improvements, production line configuration, and safety procedures. This role must use and exemplify industry leading maintenance practices and methodologies to increase equipment safety, uptime, and performance. DUTIES AND RESPONSIBILITIES : Champions company and industry standard safety policies and procedures - OSHA, NEC, NFPA, USDA, FDA, etc. Recognize, escalate, and action unsafe work conditions and engages with co-workers to ensure conditions and behaviors comply with policies. Make suggestions to improve safe work practices and procedures as appropriate. Develop and execute inspections and preventive/predictive maintenance tasks on production and process utility equipment to increase quality, safety, and overall equipment reliability. Diagnose and repair production and process utility equipment deficiencies and failures; to include, but not limited to mechanical, electrical, pneumatic, and hydraulic equipment. May include facility repairs as needed. Use continuous improvements tools and methods to improve equipment reliability, may include root cause analysis (RCA), failure mode analysis (FMA) and make recommendations to prevent recurrence. Coach and train team members on RCA and FMA. Champion and lead production equipment rebuilds, line moves, installations, setups, and calibrations. Work with OEM's on emergency repairs as needed. Read and interpret equipment work orders, manuals, assembly diagrams, electrical schematics, and P&ID's to perform required maintenance and service. Coach and train team members on reading and interpreting said technical documents. Responsible for effectively managing assigned planned work, unplanned failures, and work orders in a high-paced, fluid work environment. Responsible for accurately and concisely logging work orders in computerized maintenance management system (CMMS) to properly track maintenance and equipment performance metrics; to include labor, equipment uptime, preventive maintenance compliance, MTTR, MTBF, part usage, etc. QUALIFICATIONS: Experience Required Five (5) plus years of maintenance experience in a manufacturing setting. Experience using lockout tagout, job hazard analysis, hot work permits, confined space, etc. Experience working in a food processing environment and familiar with USDA, FDA, and SQF policies and procedures Preferred 1 year experience in a leadership role Experience with the use of condition diagnostic techniques including vibration analysis, oil analysis, ultrasonic testing, and thermographic testing. Education High School Diploma or GED Certificates, Licenses, and Registrations: Required - Must provide own tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics. Preferred - Formal training in equipment maintenance repair, installation, and troubleshooting of electrical equipment is highly desired. Skills Extensive knowledge of OSHA safety regulations Extensive knowledge of environmental and food safety regulations Moderate computer skills and knowledge Extensive knowledge and skill in Preventive Maintenance Inspections and repair Extensive knowledge and skill in diagnosis and repair of mechanical, electrical, pneumatic and hydraulic systems Extensive knowledge and skill with a multi-meter, infrared thermometer, and megohmmeter. Extensive knowledge of OSHA safety regulations Extensive knowledge of environmental and food safety regulations Moderate computer skills and knowledge Extensive knowledge and skill in Preventive Maintenance Inspections and repair Extensive knowledge and skill in diagnosis and repair of mechanical, electrical, pneumatic and hydraulic systems Extensive knowledge and skill with a multi-meter, infrared thermometer, and megohmmeter. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions The employee is occasionally required to sit and must frequently lift heavy items. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools and other shop equipment Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working Conditions: The work environment characteristics described here are representative of those an associate may encounter while performing the essential functions of the job. Food processing temperatures of While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
JOB SUMMARY: The Production Technician III role is essential for supporting the operations team and is responsible for planning and performing highly diversified duties to include installing, moving, repairing and preventive maintenance on production equipment throughout the facility. Perform 5S and Lean manufacturing activities including material handling improvements, production line configuration, and safety procedures. This role must use and exemplify industry leading maintenance practices and methodologies to increase equipment safety, uptime, and performance. DUTIES AND RESPONSIBILITIES : Champions company and industry standard safety policies and procedures - OSHA, NEC, NFPA, USDA, FDA, etc. Recognize, escalate, and action unsafe work conditions and engages with co-workers to ensure conditions and behaviors comply with policies. Make suggestions to improve safe work practices and procedures as appropriate. Develop and execute inspections and preventive/predictive maintenance tasks on production and process utility equipment to increase quality, safety, and overall equipment reliability. Diagnose and repair production and process utility equipment deficiencies and failures; to include, but not limited to mechanical, electrical, pneumatic, and hydraulic equipment. May include facility repairs as needed. Use continuous improvements tools and methods to improve equipment reliability, may include root cause analysis (RCA), failure mode analysis (FMA) and make recommendations to prevent recurrence. Coach and train team members on RCA and FMA. Champion and lead production equipment rebuilds, line moves, installations, setups, and calibrations. Work with OEM's on emergency repairs as needed. Read and interpret equipment work orders, manuals, assembly diagrams, electrical schematics, and P&ID's to perform required maintenance and service. Coach and train team members on reading and interpreting said technical documents. Responsible for effectively managing assigned planned work, unplanned failures, and work orders in a high-paced, fluid work environment. Responsible for accurately and concisely logging work orders in computerized maintenance management system (CMMS) to properly track maintenance and equipment performance metrics; to include labor, equipment uptime, preventive maintenance compliance, MTTR, MTBF, part usage, etc. QUALIFICATIONS: Experience Required Five (5) plus years of maintenance experience in a manufacturing setting. Experience using lockout tagout, job hazard analysis, hot work permits, confined space, etc. Experience working in a food processing environment and familiar with USDA, FDA, and SQF policies and procedures Preferred 1 year experience in a leadership role Experience with the use of condition diagnostic techniques including vibration analysis, oil analysis, ultrasonic testing, and thermographic testing. Education High School Diploma or GED Certificates, Licenses, and Registrations: Required - Must provide own tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics. Preferred - Formal training in equipment maintenance repair, installation, and troubleshooting of electrical equipment is highly desired. Skills Extensive knowledge of OSHA safety regulations Extensive knowledge of environmental and food safety regulations Moderate computer skills and knowledge Extensive knowledge and skill in Preventive Maintenance Inspections and repair Extensive knowledge and skill in diagnosis and repair of mechanical, electrical, pneumatic and hydraulic systems Extensive knowledge and skill with a multi-meter, infrared thermometer, and megohmmeter. Extensive knowledge of OSHA safety regulations Extensive knowledge of environmental and food safety regulations Moderate computer skills and knowledge Extensive knowledge and skill in Preventive Maintenance Inspections and repair Extensive knowledge and skill in diagnosis and repair of mechanical, electrical, pneumatic and hydraulic systems Extensive knowledge and skill with a multi-meter, infrared thermometer, and megohmmeter. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions The employee is occasionally required to sit and must frequently lift heavy items. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools and other shop equipment Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working Conditions: The work environment characteristics described here are representative of those an associate may encounter while performing the essential functions of the job. Food processing temperatures of While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
