Pay : Starts at $32 per hour and may vary based on experience Shift: Monday-Thursday, 4:00 PM to 2:30 AM (flexible; four 10-hour shifts) Shift Differential: $1/hour Tool Allowance: $300 twice annually Outstanding benefits - Stable, full-time career with a growing company Advance your career with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
06/24/2026
Full time
Pay : Starts at $32 per hour and may vary based on experience Shift: Monday-Thursday, 4:00 PM to 2:30 AM (flexible; four 10-hour shifts) Shift Differential: $1/hour Tool Allowance: $300 twice annually Outstanding benefits - Stable, full-time career with a growing company Advance your career with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Job Description Job Description Agave Mechanical Phoenix Metropolitan Area Agave Mechanical is hiring a skilled Commercial HVAC Foreman/Installer to join our growing installation team in Phoenix, Arizona. We are a locally owned and operated commercial HVAC company serving customers throughout the Phoenix metro area, focused on quality installations, safety, and long-term system performance. This role is ideal for a highly experienced Commercial HVAC Journeyman Installer looking for steady year-round work, competitive pay, and growth opportunities within a professional, well-supported team. Position Overview Agave Mechanical is seeking a dynamic and experienced Commercial HVAC Journeyman Installer to join our growing team. In this key leadership role, you will oversee and execute commercial HVAC installation projects from start to finish while remaining hands-on in the field. Your expertise will ensure projects are completed safely, efficiently, and to the highest quality standards. This position is ideal for a skilled commercial installer ready to take on leadership responsibilities, mentor team members, and collaborate closely with project managers and contractors in a fast-paced environment. Compensation $35.00 - $50.00 per hour, Depending on Experience Weekly payroll Benefits & Perks Paid time off (PTO) Paid holidays Paid sick time Health insurance Yearly bonus plan Year-round work in the Phoenix market Company-provided take-home service vehicle Company-provided smartphone or virtual phone and fuel card Company-provided large service tools and specialty tools Ongoing HVAC training and professional development Annual performance evaluations Strong opportunity for advancement within the companyKey Responsibilities Lead and manage commercial HVAC installation projects from start to completion Install and oversee installation of rooftop units, ductwork, and complete HVAC systems Read, interpret, and execute work from blueprints, schematics, and project specifications Accurately measure, fabricate, and install sheet metal components Coordinate daily job site activities and assign tasks to installation team members Collaborate closely with project managers, contractors, and other trades Ensure installations meet company standards, manufacturer requirements, and local codes Conduct system testing, commissioning, and final inspections Perform troubleshooting, repair, and adjustments as needed during installation Enforce safety protocols and maintain a safe, organized job site Provide guidance and mentorship to journeyman and apprentice installers Communicate job progress, material needs, and scheduling updates to management Maintain accurate documentation of installation processes and job completion Required Qualifications 5+ years of commercial HVAC installation experience Prior leadership, foreman, or lead installer experience required Strong ability to read and interpret blueprints, schematics, and specifications Extensive experience with commercial HVAC systems, ductwork, and mechanical components Knowledge of HVAC-related plumbing connections and system layouts Working knowledge of air conditioning and mechanical systems Experience using diagnostic tools and performing equipment troubleshooting Strong communication, organizational, and leadership skills Ability to work independently while leading a team effectively Commitment to safety, quality workmanship, and professionalism Valid driver's license and ability to supervise commercial job sites Why Work at Agave Mechanical? Agave Mechanical offers consistent work, strong leadership, and a professional environment where installers are supported with the tools, training, and structure needed to succeed. If you're a commercial HVAC installer in Arizona looking to grow your career, we'd like to hear from you. Company Description Agave Mechanical is a locally owned and operated commercial HVAC and mechanical services company serving businesses throughout the Phoenix metropolitan area and across Arizona. We specialize in reliable, high-quality HVAC service, maintenance, and repair for commercial facilities, with a strong focus on professionalism, safety, and long-term system performance. Our team is built around experienced technicians, modern tools, and proven processes that allow us to respond efficiently and deliver consistent results. At Agave Mechanical, we believe that taking care of our people is just as important as taking care of our customers, because great service starts with a well-supported team. We are committed to building long-term partnerships with our clients and long-term careers for our employees by providing steady work, ongoing training, and opportunities for growth within the company. Company Description Agave Mechanical is a locally owned and operated commercial HVAC and mechanical services company serving businesses throughout the Phoenix metropolitan area and across Arizona. We specialize in reliable, high-quality HVAC service, maintenance, and repair for commercial facilities, with a strong focus on professionalism, safety, and long-term system performance. Our team is built around experienced technicians, modern tools, and proven processes that allow us to respond efficiently and deliver consistent results. At Agave Mechanical, we believe that taking care of our people is just as important as taking care of our customers, because great service starts with a well-supported team. We are committed to building long-term partnerships with our clients and long-term careers for our employees by providing steady work, ongoing training, and opportunities for growth within the company.
06/24/2026
Full time
Job Description Job Description Agave Mechanical Phoenix Metropolitan Area Agave Mechanical is hiring a skilled Commercial HVAC Foreman/Installer to join our growing installation team in Phoenix, Arizona. We are a locally owned and operated commercial HVAC company serving customers throughout the Phoenix metro area, focused on quality installations, safety, and long-term system performance. This role is ideal for a highly experienced Commercial HVAC Journeyman Installer looking for steady year-round work, competitive pay, and growth opportunities within a professional, well-supported team. Position Overview Agave Mechanical is seeking a dynamic and experienced Commercial HVAC Journeyman Installer to join our growing team. In this key leadership role, you will oversee and execute commercial HVAC installation projects from start to finish while remaining hands-on in the field. Your expertise will ensure projects are completed safely, efficiently, and to the highest quality standards. This position is ideal for a skilled commercial installer ready to take on leadership responsibilities, mentor team members, and collaborate closely with project managers and contractors in a fast-paced environment. Compensation $35.00 - $50.00 per hour, Depending on Experience Weekly payroll Benefits & Perks Paid time off (PTO) Paid holidays Paid sick time Health insurance Yearly bonus plan Year-round work in the Phoenix market Company-provided take-home service vehicle Company-provided smartphone or virtual phone and fuel card Company-provided large service tools and specialty tools Ongoing HVAC training and professional development Annual performance evaluations Strong opportunity for advancement within the companyKey Responsibilities Lead and manage commercial HVAC installation projects from start to completion Install and oversee installation of rooftop units, ductwork, and complete HVAC systems Read, interpret, and execute work from blueprints, schematics, and project specifications Accurately measure, fabricate, and install sheet metal components Coordinate daily job site activities and assign tasks to installation team members Collaborate closely with project managers, contractors, and other trades Ensure installations meet company standards, manufacturer requirements, and local codes Conduct system testing, commissioning, and final inspections Perform troubleshooting, repair, and adjustments as needed during installation Enforce safety protocols and maintain a safe, organized job site Provide guidance and mentorship to journeyman and apprentice installers Communicate job progress, material needs, and scheduling updates to management Maintain accurate documentation of installation processes and job completion Required Qualifications 5+ years of commercial HVAC installation experience Prior leadership, foreman, or lead installer experience required Strong ability to read and interpret blueprints, schematics, and specifications Extensive experience with commercial HVAC systems, ductwork, and mechanical components Knowledge of HVAC-related plumbing connections and system layouts Working knowledge of air conditioning and mechanical systems Experience using diagnostic tools and performing equipment troubleshooting Strong communication, organizational, and leadership skills Ability to work independently while leading a team effectively Commitment to safety, quality workmanship, and professionalism Valid driver's license and ability to supervise commercial job sites Why Work at Agave Mechanical? Agave Mechanical offers consistent work, strong leadership, and a professional environment where installers are supported with the tools, training, and structure needed to succeed. If you're a commercial HVAC installer in Arizona looking to grow your career, we'd like to hear from you. Company Description Agave Mechanical is a locally owned and operated commercial HVAC and mechanical services company serving businesses throughout the Phoenix metropolitan area and across Arizona. We specialize in reliable, high-quality HVAC service, maintenance, and repair for commercial facilities, with a strong focus on professionalism, safety, and long-term system performance. Our team is built around experienced technicians, modern tools, and proven processes that allow us to respond efficiently and deliver consistent results. At Agave Mechanical, we believe that taking care of our people is just as important as taking care of our customers, because great service starts with a well-supported team. We are committed to building long-term partnerships with our clients and long-term careers for our employees by providing steady work, ongoing training, and opportunities for growth within the company. Company Description Agave Mechanical is a locally owned and operated commercial HVAC and mechanical services company serving businesses throughout the Phoenix metropolitan area and across Arizona. We specialize in reliable, high-quality HVAC service, maintenance, and repair for commercial facilities, with a strong focus on professionalism, safety, and long-term system performance. Our team is built around experienced technicians, modern tools, and proven processes that allow us to respond efficiently and deliver consistent results. At Agave Mechanical, we believe that taking care of our people is just as important as taking care of our customers, because great service starts with a well-supported team. We are committed to building long-term partnerships with our clients and long-term careers for our employees by providing steady work, ongoing training, and opportunities for growth within the company.
Pay : Starts at $36 per hour and may vary based on experience Shift: Monday-Thursday, 4:00 PM to 2:30 AM (flexible; four 10-hour shifts) Shift Differential: $1/hour Tool Allowance: $300 twice annually Outstanding benefits - Stable, full-time career with a growing company Advance your career with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
06/24/2026
Full time
Pay : Starts at $36 per hour and may vary based on experience Shift: Monday-Thursday, 4:00 PM to 2:30 AM (flexible; four 10-hour shifts) Shift Differential: $1/hour Tool Allowance: $300 twice annually Outstanding benefits - Stable, full-time career with a growing company Advance your career with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Embark on a rewarding career with Fire Safety and Protection (FSP)! FSP's rich multi-decade history is built on lasting customer relationships and continued high-quality service. We are proud to offer a full suite of life safety solutions across the U.S. and Canada. Our certified technicians deliver code-compliant fire safety solutions tailored to our customers' needs. It's our goal to be the single source for our customers' inspection, maintenance, repair, design and installation of their fire and security systems. With continuous training in the latest technologies and regulations, our customers trust us for high-quality workmanship that keeps their building systems in optimal condition for ongoing safety. We are military friendly! At FSP, we believe military veterans bring unmatched dedication, discipline, and a strong sense of purpose-qualities that align perfectly with our mission to protect lives and property through high-quality fire and life safety services. Our team values leadership, precision, and teamwork-making FSP a natural next step for those who have served. FSP accepts technical certification credit for military experience in relevant fields. Learn more here. Apply today and become part of a company where your skills and dedication are valued. Job Description: The Sales Account Manager works to develop new and potential accounts within a defined territory of Fire Safety and Protection (FSP). The Sales Account Manager will provide expert consultation on products and services, ensure excellent customer service, and serve as the primary point of contact for clients, ensuring that all their life safety and security needs are met. Essential Functions: Client Relationship Management: • Develop and maintain strong, long-term relationships with clients by understanding their life safety and security requirements. • Act as the primary liaison between the client and the company, ensuring smooth communication and addressing client concerns promptly. Sales and Business Development: • Identify opportunities for upselling and cross-selling life safety and security products and services, such as fire alarms, intrusion detection, CCTV systems, and access control. • Develop and execute account plans to grow the business with key clients. • Achieve or exceed assigned sales targets and KPIs. • Win new clients through new long term service agreements or competitive take overs and retrofits of existing facilities. Solution Consulting: • Collaborate with the technical team to ensure the solutions provided meet client needs and regulatory requirements. • Provide product demonstrations and technical guidance to clients regarding life safety and security systems. Project Coordination: • Oversee the implementation and delivery of life safety and security solutions, coordinating with installation teams and ensuring projects are completed on time and within budget. • Monitor and follow up on the maintenance and service of existing systems. Market Research and Reporting: • Keep up to date with industry trends, product innovations, and competitors to provide strategic advice to clients and help shape company offerings. • Prepare regular sales reports, client updates, and forecasts for management. Compliance and Regulatory Knowledge: • Stay informed about local, state, and federal regulations related to life safety and security systems (e.g., NFPA, OSHA, UL standards) and ensure solutions comply with these standards. Benefits: Fire Safety and Protection (FSP) provides comprehensive benefits to ensure the wellbeing of our employees: Company paid benefits: Life/AD&D Long Term Disability Employee Assistance Program Paid Time Off (PTO) 7 Paid Holidays, and 1 floating holiday (employee choice) Paid jury duty and bereavement leave Voluntary Health Benefits: Medical, Dental, Vision Voluntary Life/AD&D Voluntary Short-Term Disability Supplemental Benefits: Voluntary Accident, Voluntary Critical Illness Legal Services HSA / Health Care and Dependent Care FSA Plans Why FSP? Supportive Culture: We value our employees and provide ongoing training. Career Growth: Advance your career with guidance from industry experts as well as tuition reimbursement and pay incentives. Broad Opportunities: With offices in the eastern U.S. and Canada, we offer diverse locations and roles. Client-Centered: We serve commercial property owners and facility managers with dedication and care. Rapid Growth: Join us as we expand and invest in new markets. Professional Development: FSP is committed to providing opportunities for employee career advancement within the Fire and Life Safety Industry. As part of this commitment, FSP offers various program sponsorships that reimburse employees for the costs of study materials and certification testing and provides tiered pay increases upon achievement of certification. Health & Safety: The personal safety and health of each employee of our organization is of primary importance. We believe that our employees are our most important assets and that their safety is our greatest responsibility. It is Fire Safety and Protection, LLC's objective to ensure a safe and productive working environment for all employees. At FSP we believe that illnesses and injuries can and must be prevented. We believe in empowering each employee to create and maintain a safe and healthy environment. FSP Equal Opportunity Employer Statement: We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug-Free Workplace & Federal Compliance Notice As a federal government contractor operating in safety-sensitive construction environments, Fire Safety and Protection is legally mandated to maintain a drug-free workplace in strict accordance with federal law. Under the Drug-Free Workplace Act and FAR 52.226-7, all controlled substances prohibited by federal statute-including marijuana/THC-are strictly forbidden within our operations. Applicants who receive a conditional offer of employment must successfully pass a pre-employment drug screen. Because federal regulations override state-level recreational marijuana laws, testing positive for marijuana/THC will result in the immediate revocation of a conditional job offer, regardless of local legalization or off-duty state protections.
06/24/2026
Full time
Embark on a rewarding career with Fire Safety and Protection (FSP)! FSP's rich multi-decade history is built on lasting customer relationships and continued high-quality service. We are proud to offer a full suite of life safety solutions across the U.S. and Canada. Our certified technicians deliver code-compliant fire safety solutions tailored to our customers' needs. It's our goal to be the single source for our customers' inspection, maintenance, repair, design and installation of their fire and security systems. With continuous training in the latest technologies and regulations, our customers trust us for high-quality workmanship that keeps their building systems in optimal condition for ongoing safety. We are military friendly! At FSP, we believe military veterans bring unmatched dedication, discipline, and a strong sense of purpose-qualities that align perfectly with our mission to protect lives and property through high-quality fire and life safety services. Our team values leadership, precision, and teamwork-making FSP a natural next step for those who have served. FSP accepts technical certification credit for military experience in relevant fields. Learn more here. Apply today and become part of a company where your skills and dedication are valued. Job Description: The Sales Account Manager works to develop new and potential accounts within a defined territory of Fire Safety and Protection (FSP). The Sales Account Manager will provide expert consultation on products and services, ensure excellent customer service, and serve as the primary point of contact for clients, ensuring that all their life safety and security needs are met. Essential Functions: Client Relationship Management: • Develop and maintain strong, long-term relationships with clients by understanding their life safety and security requirements. • Act as the primary liaison between the client and the company, ensuring smooth communication and addressing client concerns promptly. Sales and Business Development: • Identify opportunities for upselling and cross-selling life safety and security products and services, such as fire alarms, intrusion detection, CCTV systems, and access control. • Develop and execute account plans to grow the business with key clients. • Achieve or exceed assigned sales targets and KPIs. • Win new clients through new long term service agreements or competitive take overs and retrofits of existing facilities. Solution Consulting: • Collaborate with the technical team to ensure the solutions provided meet client needs and regulatory requirements. • Provide product demonstrations and technical guidance to clients regarding life safety and security systems. Project Coordination: • Oversee the implementation and delivery of life safety and security solutions, coordinating with installation teams and ensuring projects are completed on time and within budget. • Monitor and follow up on the maintenance and service of existing systems. Market Research and Reporting: • Keep up to date with industry trends, product innovations, and competitors to provide strategic advice to clients and help shape company offerings. • Prepare regular sales reports, client updates, and forecasts for management. Compliance and Regulatory Knowledge: • Stay informed about local, state, and federal regulations related to life safety and security systems (e.g., NFPA, OSHA, UL standards) and ensure solutions comply with these standards. Benefits: Fire Safety and Protection (FSP) provides comprehensive benefits to ensure the wellbeing of our employees: Company paid benefits: Life/AD&D Long Term Disability Employee Assistance Program Paid Time Off (PTO) 7 Paid Holidays, and 1 floating holiday (employee choice) Paid jury duty and bereavement leave Voluntary Health Benefits: Medical, Dental, Vision Voluntary Life/AD&D Voluntary Short-Term Disability Supplemental Benefits: Voluntary Accident, Voluntary Critical Illness Legal Services HSA / Health Care and Dependent Care FSA Plans Why FSP? Supportive Culture: We value our employees and provide ongoing training. Career Growth: Advance your career with guidance from industry experts as well as tuition reimbursement and pay incentives. Broad Opportunities: With offices in the eastern U.S. and Canada, we offer diverse locations and roles. Client-Centered: We serve commercial property owners and facility managers with dedication and care. Rapid Growth: Join us as we expand and invest in new markets. Professional Development: FSP is committed to providing opportunities for employee career advancement within the Fire and Life Safety Industry. As part of this commitment, FSP offers various program sponsorships that reimburse employees for the costs of study materials and certification testing and provides tiered pay increases upon achievement of certification. Health & Safety: The personal safety and health of each employee of our organization is of primary importance. We believe that our employees are our most important assets and that their safety is our greatest responsibility. It is Fire Safety and Protection, LLC's objective to ensure a safe and productive working environment for all employees. At FSP we believe that illnesses and injuries can and must be prevented. We believe in empowering each employee to create and maintain a safe and healthy environment. FSP Equal Opportunity Employer Statement: We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug-Free Workplace & Federal Compliance Notice As a federal government contractor operating in safety-sensitive construction environments, Fire Safety and Protection is legally mandated to maintain a drug-free workplace in strict accordance with federal law. Under the Drug-Free Workplace Act and FAR 52.226-7, all controlled substances prohibited by federal statute-including marijuana/THC-are strictly forbidden within our operations. Applicants who receive a conditional offer of employment must successfully pass a pre-employment drug screen. Because federal regulations override state-level recreational marijuana laws, testing positive for marijuana/THC will result in the immediate revocation of a conditional job offer, regardless of local legalization or off-duty state protections.
Pay: $25/HR, depending on experience Shift Available: 4:00 PM - 12:30 AM Sunday through Thursday Shift Differential: Yes Annual Tool Allowance: Available Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
06/24/2026
Full time
Pay: $25/HR, depending on experience Shift Available: 4:00 PM - 12:30 AM Sunday through Thursday Shift Differential: Yes Annual Tool Allowance: Available Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Job Description Job Description Position Overview Best Cincinnati Chimney is seeking a motivated Chimney Inspector / Installer to perform chimney and fireplace inspections, educate homeowners, identify safety concerns, and provide solutions for repair and maintenance needs. This is not a high-pressure sales position. You will alongside our lead installer. The ideal candidate acts as a trusted advisor who helps homeowners understand the condition of their chimney, fireplace, and venting systems while recommending appropriate repairs and services based on industry standards and safety requirements. Previous chimney experience is preferred, but we will provide extensive training for the right candidate in chimney systems, fireplaces, masonry, NFPA 211 standards, and advanced customer communication. Primary Responsibilities Inspection Duties Perform Level 1 and Level 2 chimney inspections. Conduct fireplace and venting system evaluations. Document defects, safety concerns, and code-related issues. Take clear inspection photos and videos. Complete digital inspection reports using company software. Explain inspection findings clearly to homeowners. Customer Service & Professionalism Arrive on time, looking sharp, and professionally dressed. Communicate clearly, honestly, and respectfully with homeowners. Represent the company brand in a positive and professional manner. Maintain accurate records and meticulous job documentation. Common Services Recommended Through our paid training program, the Inspector/Sales Representative will become an expert in evaluating and recommending: Chimney sweeping & custom caps Crown repairs & waterproofing Flashing repairs & masonry tuckpointing Structural chimney rebuilds Stainless steel liner installations Fireplace and smoke chamber repairs Gas fireplace service, wood stove, and insert installations Qualifications Required U.S. Citizenship is required. Valid driver's license and a clean, insurable driving record. Must be able to pass a mandatory drug test and background check. Absolute Comfort with Heights: Must be completely comfortable setting up and climbing tall ladders, and walking on roofs daily. Skills & Skills: Ability to lift 75 pounds. Strong verbal communication and interpersonal skills. Basic computer and tablet proficiency for digital reporting. High level of self-motivation and the ability to work independently. Preferred Backgrounds (Not required, but a major plus): Construction, Roofing, or Masonry experience. Home Inspection or Chimney industry experience. B2B/B2C Sales experience or a strong Customer Service background. Physical Requirements Climb ladders up to three stories high. Walk on residential roofs when conditions permit safely. Work outdoors in varying Midwest weather conditions. Lift and carry specialized inspection equipment. Enter attics, crawl spaces, and basements as needed. Success Metrics Your performance and clear path to bonuses will be measured by: Inspection completion rate & documentation quality Sales conversion percentage & average ticket value Customer satisfaction ratings Estimate follow-up completion Full safety compliance Elite Training Provided We fully fund and invest in your professional growth. Best Cincinnati Chimney provides comprehensive training in: Chimney and fireplace anatomy & NFPA 211 standards Field safety protocols & draft/venting principles Water intrusion diagnosis & masonry deterioration identification Fireplace and appliance systems & specialized inspection procedures Modern sales presentation skills & company software reporting systems The Ideal Candidate The ideal candidate is someone who enjoys meeting homeowners, solving puzzles, and helping people protect their single largest asset-their home. You are comfortable discussing and confidently communicating both safety hazards and technical solutions. If you are ready for a change, and an increase increase to your income potential based on your actual performance, apply to join the Best Cincinnati Chimney team today! Company Description Best Cincinnati Chimney is the region's trusted, independent expert for elite chimney sweeping, safety inspections, and full-scale masonry restoration. Family-owned and operated, we reject corporate red tape and rigid union politics. Instead, we focus on a culture of safety, invest heavily in fully funded employee trade certifications, and offer performance-driven, uncapped earning structures where your hustle is directly rewarded. Company Description Best Cincinnati Chimney is the region's trusted, independent expert for elite chimney sweeping, safety inspections, and full-scale masonry restoration. Family-owned and operated, we reject corporate red tape and rigid union politics. Instead, we focus on a culture of safety, invest heavily in fully funded employee trade certifications, and offer performance-driven, uncapped earning structures where your hustle is directly rewarded.
06/24/2026
Full time
Job Description Job Description Position Overview Best Cincinnati Chimney is seeking a motivated Chimney Inspector / Installer to perform chimney and fireplace inspections, educate homeowners, identify safety concerns, and provide solutions for repair and maintenance needs. This is not a high-pressure sales position. You will alongside our lead installer. The ideal candidate acts as a trusted advisor who helps homeowners understand the condition of their chimney, fireplace, and venting systems while recommending appropriate repairs and services based on industry standards and safety requirements. Previous chimney experience is preferred, but we will provide extensive training for the right candidate in chimney systems, fireplaces, masonry, NFPA 211 standards, and advanced customer communication. Primary Responsibilities Inspection Duties Perform Level 1 and Level 2 chimney inspections. Conduct fireplace and venting system evaluations. Document defects, safety concerns, and code-related issues. Take clear inspection photos and videos. Complete digital inspection reports using company software. Explain inspection findings clearly to homeowners. Customer Service & Professionalism Arrive on time, looking sharp, and professionally dressed. Communicate clearly, honestly, and respectfully with homeowners. Represent the company brand in a positive and professional manner. Maintain accurate records and meticulous job documentation. Common Services Recommended Through our paid training program, the Inspector/Sales Representative will become an expert in evaluating and recommending: Chimney sweeping & custom caps Crown repairs & waterproofing Flashing repairs & masonry tuckpointing Structural chimney rebuilds Stainless steel liner installations Fireplace and smoke chamber repairs Gas fireplace service, wood stove, and insert installations Qualifications Required U.S. Citizenship is required. Valid driver's license and a clean, insurable driving record. Must be able to pass a mandatory drug test and background check. Absolute Comfort with Heights: Must be completely comfortable setting up and climbing tall ladders, and walking on roofs daily. Skills & Skills: Ability to lift 75 pounds. Strong verbal communication and interpersonal skills. Basic computer and tablet proficiency for digital reporting. High level of self-motivation and the ability to work independently. Preferred Backgrounds (Not required, but a major plus): Construction, Roofing, or Masonry experience. Home Inspection or Chimney industry experience. B2B/B2C Sales experience or a strong Customer Service background. Physical Requirements Climb ladders up to three stories high. Walk on residential roofs when conditions permit safely. Work outdoors in varying Midwest weather conditions. Lift and carry specialized inspection equipment. Enter attics, crawl spaces, and basements as needed. Success Metrics Your performance and clear path to bonuses will be measured by: Inspection completion rate & documentation quality Sales conversion percentage & average ticket value Customer satisfaction ratings Estimate follow-up completion Full safety compliance Elite Training Provided We fully fund and invest in your professional growth. Best Cincinnati Chimney provides comprehensive training in: Chimney and fireplace anatomy & NFPA 211 standards Field safety protocols & draft/venting principles Water intrusion diagnosis & masonry deterioration identification Fireplace and appliance systems & specialized inspection procedures Modern sales presentation skills & company software reporting systems The Ideal Candidate The ideal candidate is someone who enjoys meeting homeowners, solving puzzles, and helping people protect their single largest asset-their home. You are comfortable discussing and confidently communicating both safety hazards and technical solutions. If you are ready for a change, and an increase increase to your income potential based on your actual performance, apply to join the Best Cincinnati Chimney team today! Company Description Best Cincinnati Chimney is the region's trusted, independent expert for elite chimney sweeping, safety inspections, and full-scale masonry restoration. Family-owned and operated, we reject corporate red tape and rigid union politics. Instead, we focus on a culture of safety, invest heavily in fully funded employee trade certifications, and offer performance-driven, uncapped earning structures where your hustle is directly rewarded. Company Description Best Cincinnati Chimney is the region's trusted, independent expert for elite chimney sweeping, safety inspections, and full-scale masonry restoration. Family-owned and operated, we reject corporate red tape and rigid union politics. Instead, we focus on a culture of safety, invest heavily in fully funded employee trade certifications, and offer performance-driven, uncapped earning structures where your hustle is directly rewarded.
Job Description Job Description PeopleReady of San Bernardino, CA is now hiring Temp to Perm Diesel Truck Mechanics in San Bernardino, CA! As a PeopleReady associate you'll benefit from: Connections and experience with some of the top companies in your area Great benefit package options Get matched to jobs quickly. Competitive pay and steady schedule The ability to see your schedule and track your hours right from our easy-to-use app, JobStack! Pay Rate: The pay rate for this job is $20 - $20 / hour What you'll be doing as a Diesel Truck Mechanic: Perform routine maintenance services including oil changes, filter replacements, tire rotations, and fluid check Diagnose mechanical, electrical, hydraulic, and electronic issues using diagnostic tools and equipment Repair and replace components such as engines, transmissions, brakes, steering systems, suspensions, and driveline parts Conduct vehicle inspections and identify safety concerns or potential failures Available shifts: Shift Timings: 1st Shift (Day) Job requirements: Applicants must be at least 18 years of age to be considered for employment with PeopleReady 2+ years of experience as a truck mechanic, diesel technician, or fleet maintenance technician Strong Knowledge of medium- duty truck systems and components Ability to lift up to 75 pounds and perform physically demanding work Resume Required Background Check Required Ready to take control of the way you work? Complete our application to join the PeopleReady team today. Please contact our San Bernardino, CA branch for more information: Branch # 1567 Address: 444 S. Waterman Avenue, Suite A & B, San Bernardino, CA 92408 A criminal background check may be required. Criminal convictions do not necessarily disqualify an applicant from consideration for a position. An individual assessment of an applicant's prior criminal convictions will be made before excluding an applicant from consideration.We will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Ordinance No. 184652. If you need more information, or wish to report violation of this ordinance, please contact the Department of Public Works (DAA), Bureau of Contract Administration. Hourly pay rates are a good-faith estimate based on factors such as relevant skills, experience, education, training, geographic location and other considerations permitted by law. An employee's pay history will not be a contributing factor where prohibited by local law. Applications are accepted on an ongoing basis unless a deadline is otherwise stated. Employees and their eligible dependents are offered Medical/Dental/Vision insurance and short-term disability. More details about our benefits can be found by copying and pasting this URL into your browser: PeopleReady considers all applicants for employment regardless of background, in compliance with applicable laws regarding fair hiring practices. PeopleReady is an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristics protected by law. We consider qualified applicants with arrest and conviction records in accordance with applicable law. TrueBlue, Inc. and its brands welcome and encourage applications from candidates with disabilities. Accommodations are available on request for candidates taking part in the selection process. If you require disability-related accommodation during the recruitment process, please contact your Recruiter or Employee Relations. TrueBlue, Inc. and its brands will consult with all applicants who request disability-related accommodation during the recruitment process to ensure that the accommodation provided takes into account the applicant's individual accessibility needs. Company Description At PeopleReady, we make a difference: PeopleReady is an industry-leading general and skilled labor staffing provider for retail, manufacturing, warehousing, logistics, energy, construction, hospitality, and other industries. The daily impact that we have on the lives of job seekers and our customers' businesses is something that we're incredibly proud of. Our team operates by one motto: We Are Ready. Ready to make a difference, ready to change lives through work and ready to win. Are you ready to join us? Apply today. We can't wait to meet you. Our global impact: Our game changing JobStack platform fills a job every 9 seconds and has filled over 7 million shifts since its inception. Through JobStack and our network of 600 branch offices across all 50 states, Puerto Rico and Canada, we serve more than 98,000 businesses and put more than 221,000 people to work in 2020. PeopleReady is part of TrueBlue, Inc. (NYSE:TBI), a leading provider of specialized workforce solutions, helping clients improve growth and performance by providing staffing, recruitment process outsourcing and managed service provider solutions. In 2020, TrueBlue connected approximately 490,000 people with work. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Company Description At PeopleReady, we make a difference: PeopleReady is an industry-leading general and skilled labor staffing provider for retail, manufacturing, warehousing, logistics, energy, construction, hospitality, and other industries. The daily impact that we have on the lives of job seekers and our customers' businesses is something that we're incredibly proud of. Our team operates by one motto: We Are Ready. Ready to make a difference, ready to change lives through work and ready to win. Are you ready to join us? Apply today. We can't wait to meet you. Our global impact: Our game changing JobStack platform fills a job every 9 seconds and has filled over 7 million shifts since its inception. Through JobStack and our network of 600 branch offices across all 50 states, Puerto Rico and Canada, we serve more than 98,000 businesses and put more than 221,000 people to work in 2020. PeopleReady is part of TrueBlue, Inc. (NYSE:TBI), a leading provider of specialized workforce solutions, helping clients improve growth and performance by providing staffing, recruitment process outsourcing and managed service provider solutions. In 2020, TrueBlue connected approximately 490,000 people with work. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.
06/24/2026
Full time
Job Description Job Description PeopleReady of San Bernardino, CA is now hiring Temp to Perm Diesel Truck Mechanics in San Bernardino, CA! As a PeopleReady associate you'll benefit from: Connections and experience with some of the top companies in your area Great benefit package options Get matched to jobs quickly. Competitive pay and steady schedule The ability to see your schedule and track your hours right from our easy-to-use app, JobStack! Pay Rate: The pay rate for this job is $20 - $20 / hour What you'll be doing as a Diesel Truck Mechanic: Perform routine maintenance services including oil changes, filter replacements, tire rotations, and fluid check Diagnose mechanical, electrical, hydraulic, and electronic issues using diagnostic tools and equipment Repair and replace components such as engines, transmissions, brakes, steering systems, suspensions, and driveline parts Conduct vehicle inspections and identify safety concerns or potential failures Available shifts: Shift Timings: 1st Shift (Day) Job requirements: Applicants must be at least 18 years of age to be considered for employment with PeopleReady 2+ years of experience as a truck mechanic, diesel technician, or fleet maintenance technician Strong Knowledge of medium- duty truck systems and components Ability to lift up to 75 pounds and perform physically demanding work Resume Required Background Check Required Ready to take control of the way you work? Complete our application to join the PeopleReady team today. Please contact our San Bernardino, CA branch for more information: Branch # 1567 Address: 444 S. Waterman Avenue, Suite A & B, San Bernardino, CA 92408 A criminal background check may be required. Criminal convictions do not necessarily disqualify an applicant from consideration for a position. An individual assessment of an applicant's prior criminal convictions will be made before excluding an applicant from consideration.We will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Ordinance No. 184652. If you need more information, or wish to report violation of this ordinance, please contact the Department of Public Works (DAA), Bureau of Contract Administration. Hourly pay rates are a good-faith estimate based on factors such as relevant skills, experience, education, training, geographic location and other considerations permitted by law. An employee's pay history will not be a contributing factor where prohibited by local law. Applications are accepted on an ongoing basis unless a deadline is otherwise stated. Employees and their eligible dependents are offered Medical/Dental/Vision insurance and short-term disability. More details about our benefits can be found by copying and pasting this URL into your browser: PeopleReady considers all applicants for employment regardless of background, in compliance with applicable laws regarding fair hiring practices. PeopleReady is an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristics protected by law. We consider qualified applicants with arrest and conviction records in accordance with applicable law. TrueBlue, Inc. and its brands welcome and encourage applications from candidates with disabilities. Accommodations are available on request for candidates taking part in the selection process. If you require disability-related accommodation during the recruitment process, please contact your Recruiter or Employee Relations. TrueBlue, Inc. and its brands will consult with all applicants who request disability-related accommodation during the recruitment process to ensure that the accommodation provided takes into account the applicant's individual accessibility needs. Company Description At PeopleReady, we make a difference: PeopleReady is an industry-leading general and skilled labor staffing provider for retail, manufacturing, warehousing, logistics, energy, construction, hospitality, and other industries. The daily impact that we have on the lives of job seekers and our customers' businesses is something that we're incredibly proud of. Our team operates by one motto: We Are Ready. Ready to make a difference, ready to change lives through work and ready to win. Are you ready to join us? Apply today. We can't wait to meet you. Our global impact: Our game changing JobStack platform fills a job every 9 seconds and has filled over 7 million shifts since its inception. Through JobStack and our network of 600 branch offices across all 50 states, Puerto Rico and Canada, we serve more than 98,000 businesses and put more than 221,000 people to work in 2020. PeopleReady is part of TrueBlue, Inc. (NYSE:TBI), a leading provider of specialized workforce solutions, helping clients improve growth and performance by providing staffing, recruitment process outsourcing and managed service provider solutions. In 2020, TrueBlue connected approximately 490,000 people with work. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Company Description At PeopleReady, we make a difference: PeopleReady is an industry-leading general and skilled labor staffing provider for retail, manufacturing, warehousing, logistics, energy, construction, hospitality, and other industries. The daily impact that we have on the lives of job seekers and our customers' businesses is something that we're incredibly proud of. Our team operates by one motto: We Are Ready. Ready to make a difference, ready to change lives through work and ready to win. Are you ready to join us? Apply today. We can't wait to meet you. Our global impact: Our game changing JobStack platform fills a job every 9 seconds and has filled over 7 million shifts since its inception. Through JobStack and our network of 600 branch offices across all 50 states, Puerto Rico and Canada, we serve more than 98,000 businesses and put more than 221,000 people to work in 2020. PeopleReady is part of TrueBlue, Inc. (NYSE:TBI), a leading provider of specialized workforce solutions, helping clients improve growth and performance by providing staffing, recruitment process outsourcing and managed service provider solutions. In 2020, TrueBlue connected approximately 490,000 people with work. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.
Patterson isn't just a place to work, it's a partner that cares about your success. One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization. We Are Patterson! Patterson Companies, Inc. is focused on providing the best products, technologies, services and business solutions to the animal and oral health markets. We are seeking a motivated individual with a strong mechanical aptitude to join our Dental Service team. This is an opportunity to work alongside the best in the dental industry to provide a first-class customer service while learning how to install and repair a variety of dental equipment including computer-related items. As employees develop their basic install and basic repair skills, they have growth opportunities with Patterson! Join a company that is Passionate, Focused, Always Advancing, and People-First. Essential Functions To perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position. Install and/or Repair Dental Equipment: The core responsibility for a Service Technician is to observe, listen, learn and apply training. Training is supplied by Service Technician mentors and online training courses through Patterson Technology Academy. Safely remove, modify, repair, and install various dental equipment under general supervision with the ability to work independently after training. Follow checklists, ensuring all critical parts are examined. Demonstrate knowledge on the installation procedures and jobsite protocol. Apply specific manufacturer and Patterson guidelines, OSHA and other applicable laws and regulations related to asepsis. Perform other duties as assigned Customer Service: Supports customer needs through responding in a timely and professional manner. Demonstrates passion and a people-first approach by treating customers in a respectful and considerate manner. Builds and maintains customer relationships through follow-up and courteous and approachable interactions. Communication: Understands and conveys information to our customers. Listens attentively and asks questions when necessary. Uses general terminology to explain technical aspects of using technology to a non-technical audience. A dditional functions In addition to the essential functions listed above, the incumbent may perform the following additional functions. Work Ethic: Commitment and desire to work with a sense of urgency and persistence in overcoming obstacles while following Patterson's business conduct and code of ethics and responsibilities. Problem Solving Skills: Anticipates problems and customer needs and goes beyond training to find answers. Interpersonal Skills: Establishes and maintains productive, mutually beneficial relationships with customers, vendors and colleagues. Responds to difficult situations and demanding people and delivers negative information in a way that enhances relationships. Inventory Management: Determines parts, supplies or tools needed to complete service requests. Manages vehicle inventory and restocks as necessary. Personal/Vehicle Safety: Safety is a primary focus for the Patterson Dental service department. Each employee must maintain a quality driving record and represent Patterson Dental while driving a company vehicle. Proper vehicle maintenance should be scheduled regularly to ensure we maintain a safe fleet on the road. Job Qualifications Required Qualifications High school diploma or equivalent Mechanical aptitude required Possesses strong work ethic and takes ownership of both company and customers goals/objectives Focused on understanding, meeting, and exceeding customer expectations Ability to thrive in a fast-paced environment Requires basic computer skills and/or ability to use smart phone/tablet Strong verbal and written communication skills Valid driver's license along with good driving record Preferred Qualifications Trade school training in carpentry/plumbing/heating/electricity/electronics is highly desirable but not required Excellent organization and problem-solving skills Knowledge of Microsoft Outlook, Excel and Teams is helpful Working Conditions Physical Demands Must be able to remain in a stationary or driving position up to 100% per day. Must be able to lift boxes and dental supplies up to 1-25 pounds up to 75% per day. Must position oneself to install/maintain dental equipment, including under equipment or cabinets up to 50% per day. Must be able to reach at shoulder level and reach at waist level up to 25% per day. Must be able to move or lift dental equipment and supplies weighing up 26-49 pounds up to 10% per day. Must be able to move dental equipment weighing up to 50 pounds into place less than 5% per day. Must be able to climb steps and/or ladders less than 5% per day. Environmental Factors This position requires traveling to customer locations and providing services and support to customers. Travel and On-call 100% travel to customer sites in a local geographic area Occasionally out of town for overnight and/or after-hours What's In It For You: We provide competitive benefits, unique incentive programs and rewards for our eligible employees: Full Medical, Dental, and Vision benefits and an integrated Wellness Program 401(k) Match Retirement Savings Plan Paid Time Off (PTO) Holiday Pay & Floating Holidays Volunteer Time Off (VTO) Educational Assistance Program Full Paid Parental and Adoption Leave LifeWorks (Employee Assistance Program) Patterson Perks Program The potential compensation range for this role is below. The final offer amount could exceed this range, based on various factors such as candidate location (geographical labor market), experience, and skills. $20.91 - $27.16 EEO Statement Patterson provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or other related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability.
06/24/2026
Full time
Patterson isn't just a place to work, it's a partner that cares about your success. One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization. We Are Patterson! Patterson Companies, Inc. is focused on providing the best products, technologies, services and business solutions to the animal and oral health markets. We are seeking a motivated individual with a strong mechanical aptitude to join our Dental Service team. This is an opportunity to work alongside the best in the dental industry to provide a first-class customer service while learning how to install and repair a variety of dental equipment including computer-related items. As employees develop their basic install and basic repair skills, they have growth opportunities with Patterson! Join a company that is Passionate, Focused, Always Advancing, and People-First. Essential Functions To perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position. Install and/or Repair Dental Equipment: The core responsibility for a Service Technician is to observe, listen, learn and apply training. Training is supplied by Service Technician mentors and online training courses through Patterson Technology Academy. Safely remove, modify, repair, and install various dental equipment under general supervision with the ability to work independently after training. Follow checklists, ensuring all critical parts are examined. Demonstrate knowledge on the installation procedures and jobsite protocol. Apply specific manufacturer and Patterson guidelines, OSHA and other applicable laws and regulations related to asepsis. Perform other duties as assigned Customer Service: Supports customer needs through responding in a timely and professional manner. Demonstrates passion and a people-first approach by treating customers in a respectful and considerate manner. Builds and maintains customer relationships through follow-up and courteous and approachable interactions. Communication: Understands and conveys information to our customers. Listens attentively and asks questions when necessary. Uses general terminology to explain technical aspects of using technology to a non-technical audience. A dditional functions In addition to the essential functions listed above, the incumbent may perform the following additional functions. Work Ethic: Commitment and desire to work with a sense of urgency and persistence in overcoming obstacles while following Patterson's business conduct and code of ethics and responsibilities. Problem Solving Skills: Anticipates problems and customer needs and goes beyond training to find answers. Interpersonal Skills: Establishes and maintains productive, mutually beneficial relationships with customers, vendors and colleagues. Responds to difficult situations and demanding people and delivers negative information in a way that enhances relationships. Inventory Management: Determines parts, supplies or tools needed to complete service requests. Manages vehicle inventory and restocks as necessary. Personal/Vehicle Safety: Safety is a primary focus for the Patterson Dental service department. Each employee must maintain a quality driving record and represent Patterson Dental while driving a company vehicle. Proper vehicle maintenance should be scheduled regularly to ensure we maintain a safe fleet on the road. Job Qualifications Required Qualifications High school diploma or equivalent Mechanical aptitude required Possesses strong work ethic and takes ownership of both company and customers goals/objectives Focused on understanding, meeting, and exceeding customer expectations Ability to thrive in a fast-paced environment Requires basic computer skills and/or ability to use smart phone/tablet Strong verbal and written communication skills Valid driver's license along with good driving record Preferred Qualifications Trade school training in carpentry/plumbing/heating/electricity/electronics is highly desirable but not required Excellent organization and problem-solving skills Knowledge of Microsoft Outlook, Excel and Teams is helpful Working Conditions Physical Demands Must be able to remain in a stationary or driving position up to 100% per day. Must be able to lift boxes and dental supplies up to 1-25 pounds up to 75% per day. Must position oneself to install/maintain dental equipment, including under equipment or cabinets up to 50% per day. Must be able to reach at shoulder level and reach at waist level up to 25% per day. Must be able to move or lift dental equipment and supplies weighing up 26-49 pounds up to 10% per day. Must be able to move dental equipment weighing up to 50 pounds into place less than 5% per day. Must be able to climb steps and/or ladders less than 5% per day. Environmental Factors This position requires traveling to customer locations and providing services and support to customers. Travel and On-call 100% travel to customer sites in a local geographic area Occasionally out of town for overnight and/or after-hours What's In It For You: We provide competitive benefits, unique incentive programs and rewards for our eligible employees: Full Medical, Dental, and Vision benefits and an integrated Wellness Program 401(k) Match Retirement Savings Plan Paid Time Off (PTO) Holiday Pay & Floating Holidays Volunteer Time Off (VTO) Educational Assistance Program Full Paid Parental and Adoption Leave LifeWorks (Employee Assistance Program) Patterson Perks Program The potential compensation range for this role is below. The final offer amount could exceed this range, based on various factors such as candidate location (geographical labor market), experience, and skills. $20.91 - $27.16 EEO Statement Patterson provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or other related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability.
Description: Take Ten Tire and Service currently has an opportunity available for Tire Service Technicians who are energetic and team-oriented. Must have tire knowledge and experience, be responsible for the service and maintenance of tires and wheels, and safely get our phenomenal customers back on the road again. This job is demanding and competitive, requiring someone with an upbeat attitude and a positive outlook. Only the serious and experienced need to apply This position's primary role is to support all levels of tire service for our customers. The Tire Tech position is a support role that provides general service and support as assigned. All work must follow company policies, procedures, and industry best practices, and no employees should attempt to do any work for which they are not trained. Essential Functions • Mount, balance, rotate, and repair all types of tires, from passenger cars to large trucks. Large truck tires are available only after completing the TIA CTS certification. • Check for needed additional service. • Drive to deliver and pick up merchandise and move customers' vehicles. • Maintain tools, equipment, and service truck in efficient operating condition, keeping it clean inside and out. • Unload, load, stock inventory, and related items as required and assist with physical inventory. • Operate a forklift, depending on the facility and only after receiving certification. • Sweep floors, clean restrooms, and perform other duties and tasks as assigned. • Make yourself available for and complete all required and additional training the Company offers. • Attend meetings held by the Store Service Manager. • Process all necessary paperwork promptly. • Observe all safety rules and procedures associated with the performance of duties. • Use personal protective equipment according to regulations and policies. • Assist with special projects as requested. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions, unless doing so would cause undue hardship on the company. Requirements: Education and Work Experience : Must have a high school diploma or GED. Experience in a shop environment and knowledge of tools and practices are helpful. Work Environment: This position requires frequent pushing/lifting of up to 50 pounds, as well as stooping, standing, and bending. This is a shop environment with varying temperatures and exposure to grease and engine fluids. Safety shoes are required but provided through a company cost-sharing program. Compensation & Benefits Competitive pay commensurate with experience Comprehensive benefits package, including: Medical, dental, and vision insurance Supplemental Insurance Paid time off and holidays 401 (k) with company matching up to 4% Compensation details: 18-18 Hourly Wage PI4ff2-8091
06/24/2026
Full time
Description: Take Ten Tire and Service currently has an opportunity available for Tire Service Technicians who are energetic and team-oriented. Must have tire knowledge and experience, be responsible for the service and maintenance of tires and wheels, and safely get our phenomenal customers back on the road again. This job is demanding and competitive, requiring someone with an upbeat attitude and a positive outlook. Only the serious and experienced need to apply This position's primary role is to support all levels of tire service for our customers. The Tire Tech position is a support role that provides general service and support as assigned. All work must follow company policies, procedures, and industry best practices, and no employees should attempt to do any work for which they are not trained. Essential Functions • Mount, balance, rotate, and repair all types of tires, from passenger cars to large trucks. Large truck tires are available only after completing the TIA CTS certification. • Check for needed additional service. • Drive to deliver and pick up merchandise and move customers' vehicles. • Maintain tools, equipment, and service truck in efficient operating condition, keeping it clean inside and out. • Unload, load, stock inventory, and related items as required and assist with physical inventory. • Operate a forklift, depending on the facility and only after receiving certification. • Sweep floors, clean restrooms, and perform other duties and tasks as assigned. • Make yourself available for and complete all required and additional training the Company offers. • Attend meetings held by the Store Service Manager. • Process all necessary paperwork promptly. • Observe all safety rules and procedures associated with the performance of duties. • Use personal protective equipment according to regulations and policies. • Assist with special projects as requested. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions, unless doing so would cause undue hardship on the company. Requirements: Education and Work Experience : Must have a high school diploma or GED. Experience in a shop environment and knowledge of tools and practices are helpful. Work Environment: This position requires frequent pushing/lifting of up to 50 pounds, as well as stooping, standing, and bending. This is a shop environment with varying temperatures and exposure to grease and engine fluids. Safety shoes are required but provided through a company cost-sharing program. Compensation & Benefits Competitive pay commensurate with experience Comprehensive benefits package, including: Medical, dental, and vision insurance Supplemental Insurance Paid time off and holidays 401 (k) with company matching up to 4% Compensation details: 18-18 Hourly Wage PI4ff2-8091
Description: SUMMARY Technicians install and service telephone, security, video, and internet systems, troubleshoot issues, and educate customers. Important information: Work Type: In-person only (remote work not available). Residency: Applicants must live within daily commuting distance. No relocation assistance is provided. Compensation: U.S.-based employment only; pay in U.S. Dollars . DUTIES & RESPONSIBILITES Complete all installations according to company and industry standards. Acquire and return equipment as directed. Maintain tools and vehicles; report any maintenance issues. Communicate with Dispatch on arrivals, departures, and any delays. Accurately complete daily reports and paperwork. Maintain a clean and organized work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all company & OSHA safety rules. Other duties as assigned. Requirements: Competencies Technical Proficiency: Possess a strong understanding of cable systems, including installation techniques, troubleshooting methods, and maintenance procedures. Problem-Solving Skills: Ability to identify and resolve technical issues efficiently, using critical thinking and analytical skills. Customer Focus: Dedication to providing excellent customer service, addressing customer needs, and ensuring satisfaction. Communication Skills: Clear and effective communication with customers, team members, and supervisors, both verbally and in writing. Attention to Detail: Thoroughness and precision in performing installations, conducting tests, and maintaining records. Adaptability: Flexibility to work in various environments and adapt to changing priorities or challenges. Safety Consciousness: Commitment to following safety protocols and regulations to prevent accidents and ensure a safe working environment. Teamwork: Ability to collaborate with colleagues, share knowledge, and contribute to the overall success of the team. Continuous Learning: Eagerness to stay updated on industry advancements, new technologies, and best practices through ongoing training and self-education. SKILLS Install residential/commercial video, HSI, XHS, CDV installation knowledge (training provided). Strong customer service, time management and communications abilities. Due to the nature of our customer base, fluency in English (speaking and understanding) is required. Read and interpret operating instructions and procedures. Basic math, computer, and troubleshooting skills. Navigating and adjusting operating systems. Ability to identify and troubleshoot technical difficulties. Manage time effectively and work independently. EDUCATION / QUALIFICATIONS High School or GED preferred. Requires the successful completion of all pre-employment testing, acceptable driving record and active driver's license. Hold a valid driver's license. Be at least 21 years old. Have a minimum of three (3) years of driving history. Maintain an acceptable Motor Vehicle Record (MVR) with no major violations is required. Note: Insurance carriers may review up to seven (7) years of driving history to determine eligibility. Must be able to independently operate a motor vehicle. Due to the sensitive nature of our work inside customers' homes and businesses, all applicants must pass a comprehensive criminal background check. Felony convictions will result in disqualification. Misdemeanors will be evaluated individually; however, offenses involving theft, assault, battery, or drug distribution within the past seven (7) years will result in disqualification. COMPENSATION Paid hourly, with a potential production bonus based on work completed, experience, certifications, quality of work, punctuality, professionalism, and adherence to company standards. Benefits offered include Health, Dental, Vision, Long Term and Short-Term Disability Policies, Life Insurance (Company paid and optional voluntary), Aflac plans, and a 401(k) with a company match. PHYSICAL REQUIREMENTS Lift up to 100 lbs., climb ladders (up to 28 ft.) and work at heights. Use hand tools. Frequent stooping, bending and twisting required. Work indoors, outdoors, in confined spaces, and while exposed to varied weather. Drive during all weather conditions, daytime and nighttime. Madison Telecommunications is a Drug-Free Workplace. Pre-employment, post-accident and random drug screenings are mandatory. PGM25 PI2c8feb28298c-9132
06/24/2026
Full time
Description: SUMMARY Technicians install and service telephone, security, video, and internet systems, troubleshoot issues, and educate customers. Important information: Work Type: In-person only (remote work not available). Residency: Applicants must live within daily commuting distance. No relocation assistance is provided. Compensation: U.S.-based employment only; pay in U.S. Dollars . DUTIES & RESPONSIBILITES Complete all installations according to company and industry standards. Acquire and return equipment as directed. Maintain tools and vehicles; report any maintenance issues. Communicate with Dispatch on arrivals, departures, and any delays. Accurately complete daily reports and paperwork. Maintain a clean and organized work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all company & OSHA safety rules. Other duties as assigned. Requirements: Competencies Technical Proficiency: Possess a strong understanding of cable systems, including installation techniques, troubleshooting methods, and maintenance procedures. Problem-Solving Skills: Ability to identify and resolve technical issues efficiently, using critical thinking and analytical skills. Customer Focus: Dedication to providing excellent customer service, addressing customer needs, and ensuring satisfaction. Communication Skills: Clear and effective communication with customers, team members, and supervisors, both verbally and in writing. Attention to Detail: Thoroughness and precision in performing installations, conducting tests, and maintaining records. Adaptability: Flexibility to work in various environments and adapt to changing priorities or challenges. Safety Consciousness: Commitment to following safety protocols and regulations to prevent accidents and ensure a safe working environment. Teamwork: Ability to collaborate with colleagues, share knowledge, and contribute to the overall success of the team. Continuous Learning: Eagerness to stay updated on industry advancements, new technologies, and best practices through ongoing training and self-education. SKILLS Install residential/commercial video, HSI, XHS, CDV installation knowledge (training provided). Strong customer service, time management and communications abilities. Due to the nature of our customer base, fluency in English (speaking and understanding) is required. Read and interpret operating instructions and procedures. Basic math, computer, and troubleshooting skills. Navigating and adjusting operating systems. Ability to identify and troubleshoot technical difficulties. Manage time effectively and work independently. EDUCATION / QUALIFICATIONS High School or GED preferred. Requires the successful completion of all pre-employment testing, acceptable driving record and active driver's license. Hold a valid driver's license. Be at least 21 years old. Have a minimum of three (3) years of driving history. Maintain an acceptable Motor Vehicle Record (MVR) with no major violations is required. Note: Insurance carriers may review up to seven (7) years of driving history to determine eligibility. Must be able to independently operate a motor vehicle. Due to the sensitive nature of our work inside customers' homes and businesses, all applicants must pass a comprehensive criminal background check. Felony convictions will result in disqualification. Misdemeanors will be evaluated individually; however, offenses involving theft, assault, battery, or drug distribution within the past seven (7) years will result in disqualification. COMPENSATION Paid hourly, with a potential production bonus based on work completed, experience, certifications, quality of work, punctuality, professionalism, and adherence to company standards. Benefits offered include Health, Dental, Vision, Long Term and Short-Term Disability Policies, Life Insurance (Company paid and optional voluntary), Aflac plans, and a 401(k) with a company match. PHYSICAL REQUIREMENTS Lift up to 100 lbs., climb ladders (up to 28 ft.) and work at heights. Use hand tools. Frequent stooping, bending and twisting required. Work indoors, outdoors, in confined spaces, and while exposed to varied weather. Drive during all weather conditions, daytime and nighttime. Madison Telecommunications is a Drug-Free Workplace. Pre-employment, post-accident and random drug screenings are mandatory. PGM25 PI2c8feb28298c-9132
Description: MVR Guidelines for all drivers SUMMARY Technicians install and service telephone, security, video, and internet systems, troubleshoot issues, and educate customers. Important information: Work Type: In-person only (remote work not available). Residency: Applicants must live within daily commuting distance. No relocation assistance is provided. Compensation: U.S.-based employment only; pay in U.S. Dollars. DUTIES & RESPONSIBILITES Complete all installations according to company and industry standards. Acquire and return equipment as directed. Maintain tools and vehicles; report any maintenance issues. Communicate with Dispatch on arrivals, departures, and any delays. Accurately complete daily reports and paperwork. Maintain a clean and organized work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all company & OSHA safety rules. Other duties as assigned. PGM25 Requirements: Competencies Technical Proficiency: Possess a strong understanding of cable systems, including installation techniques, troubleshooting methods, and maintenance procedures. Problem-Solving Skills: Ability to identify and resolve technical issues efficiently, using critical thinking and analytical skills. Customer Focus: Dedication to providing excellent customer service, addressing customer needs, and ensuring satisfaction. Communication Skills: Clear and effective communication with customers, team members, and supervisors, both verbally and in writing. Attention to Detail: Thoroughness and precision in performing installations, conducting tests, and maintaining records. Adaptability: Flexibility to work in various environments and adapt to changing priorities or challenges. Safety Consciousness: Commitment to following safety protocols and regulations to prevent accidents and ensure a safe working environment. Teamwork: Ability to collaborate with colleagues, share knowledge, and contribute to the overall success of the team. Continuous Learning: Eagerness to stay updated on industry advancements, new technologies, and best practices through ongoing training and self-education. SKILLS Install residential/commercial video, HIS, XHS, CDV installation knowledge (training provided). Strong customer service, time management and communications abilities. Due to the nature of our customer base, fluency in English (speaking and understanding) is required. Read and interpret operating instructions and procedures. Basic math, computer, and troubleshooting skills. Navigating and adjusting operating systems. Ability to identify and troubleshoot technical difficulties. Manage time effectively and work independently. EDUCATION / QUALIFICATIONS High School or GED preferred. Requires the successful completion of all pre-employment testing, acceptable driving record and active driver's license. Hold a valid driver's license. Be at least 21 years old. Have a minimum of three (3) years of driving history. Maintain an acceptable Motor Vehicle Record (MVR) with no major violations is required. Note: Insurance carriers may review up to seven (7) years of driving history to determine eligibility. Must be able to independently operate a motor vehicle. Due to the sensitive nature of our work inside customers' homes and businesses, all applicants must pass a comprehensive criminal background check. Felony convictions will result in disqualification. Misdemeanors will be evaluated individually; however, offenses involving theft, assault, battery, or drug distribution within the past seven (7) years will result in disqualification. COMPENSATION Paid hourly, with a potential production bonus based on work completed, experience, certifications, quality of work, punctuality, professionalism, and adherence to company standards. Benefits offered include Health, Dental, Vision, Long Term and Short-Term Disability Policies, Life Insurance (Company paid and optional voluntary), Aflac plans, and a 401(k) with a company match. PHYSICAL REQUIREMENTS Lift up to 100 lbs., climb ladders (up to 28 ft.) and work at heights. Use hand tools. Frequent stooping, bending and twisting required. Work indoors, outdoors, in confined spaces, and while exposed to varied weather. Drive during all weather conditions, daytime and nighttime. Madison Telecommunications is a Drug-Free Workplace. Pre-employment, post-accident and random drug screenings are mandatory. PI76e22dc875fd-9131
06/24/2026
Full time
Description: MVR Guidelines for all drivers SUMMARY Technicians install and service telephone, security, video, and internet systems, troubleshoot issues, and educate customers. Important information: Work Type: In-person only (remote work not available). Residency: Applicants must live within daily commuting distance. No relocation assistance is provided. Compensation: U.S.-based employment only; pay in U.S. Dollars. DUTIES & RESPONSIBILITES Complete all installations according to company and industry standards. Acquire and return equipment as directed. Maintain tools and vehicles; report any maintenance issues. Communicate with Dispatch on arrivals, departures, and any delays. Accurately complete daily reports and paperwork. Maintain a clean and organized work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all company & OSHA safety rules. Other duties as assigned. PGM25 Requirements: Competencies Technical Proficiency: Possess a strong understanding of cable systems, including installation techniques, troubleshooting methods, and maintenance procedures. Problem-Solving Skills: Ability to identify and resolve technical issues efficiently, using critical thinking and analytical skills. Customer Focus: Dedication to providing excellent customer service, addressing customer needs, and ensuring satisfaction. Communication Skills: Clear and effective communication with customers, team members, and supervisors, both verbally and in writing. Attention to Detail: Thoroughness and precision in performing installations, conducting tests, and maintaining records. Adaptability: Flexibility to work in various environments and adapt to changing priorities or challenges. Safety Consciousness: Commitment to following safety protocols and regulations to prevent accidents and ensure a safe working environment. Teamwork: Ability to collaborate with colleagues, share knowledge, and contribute to the overall success of the team. Continuous Learning: Eagerness to stay updated on industry advancements, new technologies, and best practices through ongoing training and self-education. SKILLS Install residential/commercial video, HIS, XHS, CDV installation knowledge (training provided). Strong customer service, time management and communications abilities. Due to the nature of our customer base, fluency in English (speaking and understanding) is required. Read and interpret operating instructions and procedures. Basic math, computer, and troubleshooting skills. Navigating and adjusting operating systems. Ability to identify and troubleshoot technical difficulties. Manage time effectively and work independently. EDUCATION / QUALIFICATIONS High School or GED preferred. Requires the successful completion of all pre-employment testing, acceptable driving record and active driver's license. Hold a valid driver's license. Be at least 21 years old. Have a minimum of three (3) years of driving history. Maintain an acceptable Motor Vehicle Record (MVR) with no major violations is required. Note: Insurance carriers may review up to seven (7) years of driving history to determine eligibility. Must be able to independently operate a motor vehicle. Due to the sensitive nature of our work inside customers' homes and businesses, all applicants must pass a comprehensive criminal background check. Felony convictions will result in disqualification. Misdemeanors will be evaluated individually; however, offenses involving theft, assault, battery, or drug distribution within the past seven (7) years will result in disqualification. COMPENSATION Paid hourly, with a potential production bonus based on work completed, experience, certifications, quality of work, punctuality, professionalism, and adherence to company standards. Benefits offered include Health, Dental, Vision, Long Term and Short-Term Disability Policies, Life Insurance (Company paid and optional voluntary), Aflac plans, and a 401(k) with a company match. PHYSICAL REQUIREMENTS Lift up to 100 lbs., climb ladders (up to 28 ft.) and work at heights. Use hand tools. Frequent stooping, bending and twisting required. Work indoors, outdoors, in confined spaces, and while exposed to varied weather. Drive during all weather conditions, daytime and nighttime. Madison Telecommunications is a Drug-Free Workplace. Pre-employment, post-accident and random drug screenings are mandatory. PI76e22dc875fd-9131
Description: Job Title - Technician Location - All Locations Department - Operations Status - Full-time or Part-time / Non-exempt Reports To - Lead Technician or System Supv. Direct Reports - No MVR Guidelines SUMMARY Technicians install service-related equipment in order to provide a customer with audio/visual or internet services. Additionally, troubleshooting service problems and educating customers is routinely part of the Technician's job. DUTIES & RESPONSIBILITES Complete the installation of all work orders in their entirety according to FHG Solutions and cable industry standards and practices and within expected timeframes. All work performed must be neat and technically sound. Work orders may be received from Dispatch, Leader or other management employees. Report work order discrepancies to Lead Technician or System Supervisor immediately. Responsible for acquiring equipment from the warehouse according to work orders and management instructions. Responsible for returning equipment at the end of the shift or when otherwise instructed. Maintain tools and equipment in good working order and ensure power supplies are fully charged. Communicate regularly with dispatcher(s) regarding arrival/departure of job site, job coding, to report delays or to request assistance. Accurate completion and submission of daily reporting and paperwork including but not limited to time sheets, recording in-route and on-the-job start and end times using PDA software, printing receipts and obtaining customer signature when work order is complete. Maintain a clean work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all required company & OSHA safety rules. Other duties as assigned. PGM25 Requirements: SKILLS Knowledge in residential and/or commercial cable, HSI and CDV installation and basic construction knowledge of residential/commercial structures. Customer service, excellent communication, self-motivation and time management are all essential. Ability to read and interpret operating instruction and procedures. Possess basic mathematical skills, common sense understanding and the ability to resolve problems in standardized situations. Knowledge of computer systems and the ability to troubleshoot technical difficulties. EDUCATION / QUALIFICATIONS High School or GED preferred. Previous experience is preferred but not necessary, training will be provided. Must possess the ability to regularly lift/carry up to 100 lbs, climb a ladder and work at heights and dark, enclosed areas. Work may be performed indoors and outdoors. Requires the successful completion of all pre-employment testing and a valid driver's license. COMPENSATION Technicians are paid on a base hourly rate with a production bonus. Hourly rate is base on level of experience, certifications and quality of work. Production bonus can be earned by completing jobs timely, being at work on time, professional in appearance, craftsmanship and complying to all of FHG's and MSO's policies and procedures PI970793e696c6-9836
06/24/2026
Full time
Description: Job Title - Technician Location - All Locations Department - Operations Status - Full-time or Part-time / Non-exempt Reports To - Lead Technician or System Supv. Direct Reports - No MVR Guidelines SUMMARY Technicians install service-related equipment in order to provide a customer with audio/visual or internet services. Additionally, troubleshooting service problems and educating customers is routinely part of the Technician's job. DUTIES & RESPONSIBILITES Complete the installation of all work orders in their entirety according to FHG Solutions and cable industry standards and practices and within expected timeframes. All work performed must be neat and technically sound. Work orders may be received from Dispatch, Leader or other management employees. Report work order discrepancies to Lead Technician or System Supervisor immediately. Responsible for acquiring equipment from the warehouse according to work orders and management instructions. Responsible for returning equipment at the end of the shift or when otherwise instructed. Maintain tools and equipment in good working order and ensure power supplies are fully charged. Communicate regularly with dispatcher(s) regarding arrival/departure of job site, job coding, to report delays or to request assistance. Accurate completion and submission of daily reporting and paperwork including but not limited to time sheets, recording in-route and on-the-job start and end times using PDA software, printing receipts and obtaining customer signature when work order is complete. Maintain a clean work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all required company & OSHA safety rules. Other duties as assigned. PGM25 Requirements: SKILLS Knowledge in residential and/or commercial cable, HSI and CDV installation and basic construction knowledge of residential/commercial structures. Customer service, excellent communication, self-motivation and time management are all essential. Ability to read and interpret operating instruction and procedures. Possess basic mathematical skills, common sense understanding and the ability to resolve problems in standardized situations. Knowledge of computer systems and the ability to troubleshoot technical difficulties. EDUCATION / QUALIFICATIONS High School or GED preferred. Previous experience is preferred but not necessary, training will be provided. Must possess the ability to regularly lift/carry up to 100 lbs, climb a ladder and work at heights and dark, enclosed areas. Work may be performed indoors and outdoors. Requires the successful completion of all pre-employment testing and a valid driver's license. COMPENSATION Technicians are paid on a base hourly rate with a production bonus. Hourly rate is base on level of experience, certifications and quality of work. Production bonus can be earned by completing jobs timely, being at work on time, professional in appearance, craftsmanship and complying to all of FHG's and MSO's policies and procedures PI970793e696c6-9836
Madison Telecommunications Inc
Montgomery, Alabama
Description: MVR Guidelines SUMMARY Technicians install and service telephone, security, video, and internet systems, troubleshoot issues, and educate customers. Important information: Work Type: In-person only (remote work not available). Residency: Applicants must live within daily commuting distance. No relocation assistance is provided. Compensation: U.S.-based employment only; pay in U.S. Dollars. DUTIES & RESPONSIBILITES Working for FHG requires travel if other markets are in need. Complete all installations according to company and industry standards. Accurately complete daily reports and paperwork. Acquire and return equipment as directed. Maintain tools and vehicles; report any maintenance issues. Communicate with Dispatch on arrivals, departures, and any delays. Maintain a clean and organized work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all company & OSHA safety rules. Other duties as assigned. PGM25 Requirements: Competencies Technical Proficiency: Possess a strong understanding of cable systems, including installation techniques, troubleshooting methods, and maintenance procedures. Problem-Solving Skills: Ability to identify and resolve technical issues efficiently, using critical thinking and analytical skills. Customer Focus: Dedication to providing excellent customer service, addressing customer needs, and ensuring satisfaction. Communication Skills: Clear and effective communication with customers, team members, and supervisors, both verbally and in writing. Attention to Detail: Thoroughness and precision in performing installations, conducting tests, and maintaining records. Adaptability: Flexibility to work in various environments and adapt to changing priorities or challenges. Safety Consciousness: Commitment to following safety protocols and regulations to prevent accidents and ensure a safe working environment. Teamwork: Ability to collaborate with colleagues, share knowledge, and contribute to the overall success of the team. Continuous Learning: Eagerness to stay updated on industry advancements, new technologies, and best practices through ongoing training and self-education. SKILLS Install residential/commercial video, HSI, CDV, HSD installation knowledge (training provided). Strong customer service, time management and communications abilities. Due to the nature of our customer base, fluency in English (speaking and understanding) is required. Read and interpret operating instructions and procedures. Basic math, computer, and troubleshooting skills. (Navigating and adjusting operating systems). Ability to identify and troubleshoot CATV technical difficulties. Manage time effectively, efficiently, and work independently. EDUCATION / QUALIFICATIONS High School or GED preferred. Be at least 21 years old. Hold a valid driver's license. Have a minimum of three (3) years of driving history. Maintain an acceptable Motor Vehicle Record (MVR) with no major violations is required. Note: Insurance carriers may review up to seven (7) years of driving history to determine eligibility. Due to the sensitive nature of our work inside customers' homes and businesses, all applicants must pass a comprehensive criminal background check. Felony convictions will result in disqualification. Misdemeanors will be evaluated individually; however, offenses involving theft, assault, battery, or drug distribution within the past seven (7) years will result in disqualification. COMPENSATION Paid hourly, with a potential production bonus based on work completed, experience, certifications, quality of work, punctuality, professionalism, and adherence to company standards. Benefits offered include Health, Dental, Vision, Long Term and Short-Term Disability Policies, Life Insurance (Company paid and optional voluntary), Aflac plans, and a 401(k) with a company match. PHYSICAL REQUIREMENTS Lift up to 100 lbs., climb ladders (up to 28 ft.) and work at heights. Use hand tools. Frequent stooping, bending and twisting required. Work indoors, outdoors, in confined spaces, and while exposed to varied weather. Drive during all weather conditions, daytime and nighttime. Madison Telecommunications is a Drug-Free Workplace. Pre-employment, post-accident and random drug screenings are mandatory. PIdf23d851fb6e-9134
06/24/2026
Full time
Description: MVR Guidelines SUMMARY Technicians install and service telephone, security, video, and internet systems, troubleshoot issues, and educate customers. Important information: Work Type: In-person only (remote work not available). Residency: Applicants must live within daily commuting distance. No relocation assistance is provided. Compensation: U.S.-based employment only; pay in U.S. Dollars. DUTIES & RESPONSIBILITES Working for FHG requires travel if other markets are in need. Complete all installations according to company and industry standards. Accurately complete daily reports and paperwork. Acquire and return equipment as directed. Maintain tools and vehicles; report any maintenance issues. Communicate with Dispatch on arrivals, departures, and any delays. Maintain a clean and organized work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all company & OSHA safety rules. Other duties as assigned. PGM25 Requirements: Competencies Technical Proficiency: Possess a strong understanding of cable systems, including installation techniques, troubleshooting methods, and maintenance procedures. Problem-Solving Skills: Ability to identify and resolve technical issues efficiently, using critical thinking and analytical skills. Customer Focus: Dedication to providing excellent customer service, addressing customer needs, and ensuring satisfaction. Communication Skills: Clear and effective communication with customers, team members, and supervisors, both verbally and in writing. Attention to Detail: Thoroughness and precision in performing installations, conducting tests, and maintaining records. Adaptability: Flexibility to work in various environments and adapt to changing priorities or challenges. Safety Consciousness: Commitment to following safety protocols and regulations to prevent accidents and ensure a safe working environment. Teamwork: Ability to collaborate with colleagues, share knowledge, and contribute to the overall success of the team. Continuous Learning: Eagerness to stay updated on industry advancements, new technologies, and best practices through ongoing training and self-education. SKILLS Install residential/commercial video, HSI, CDV, HSD installation knowledge (training provided). Strong customer service, time management and communications abilities. Due to the nature of our customer base, fluency in English (speaking and understanding) is required. Read and interpret operating instructions and procedures. Basic math, computer, and troubleshooting skills. (Navigating and adjusting operating systems). Ability to identify and troubleshoot CATV technical difficulties. Manage time effectively, efficiently, and work independently. EDUCATION / QUALIFICATIONS High School or GED preferred. Be at least 21 years old. Hold a valid driver's license. Have a minimum of three (3) years of driving history. Maintain an acceptable Motor Vehicle Record (MVR) with no major violations is required. Note: Insurance carriers may review up to seven (7) years of driving history to determine eligibility. Due to the sensitive nature of our work inside customers' homes and businesses, all applicants must pass a comprehensive criminal background check. Felony convictions will result in disqualification. Misdemeanors will be evaluated individually; however, offenses involving theft, assault, battery, or drug distribution within the past seven (7) years will result in disqualification. COMPENSATION Paid hourly, with a potential production bonus based on work completed, experience, certifications, quality of work, punctuality, professionalism, and adherence to company standards. Benefits offered include Health, Dental, Vision, Long Term and Short-Term Disability Policies, Life Insurance (Company paid and optional voluntary), Aflac plans, and a 401(k) with a company match. PHYSICAL REQUIREMENTS Lift up to 100 lbs., climb ladders (up to 28 ft.) and work at heights. Use hand tools. Frequent stooping, bending and twisting required. Work indoors, outdoors, in confined spaces, and while exposed to varied weather. Drive during all weather conditions, daytime and nighttime. Madison Telecommunications is a Drug-Free Workplace. Pre-employment, post-accident and random drug screenings are mandatory. PIdf23d851fb6e-9134
Madison Telecommunications Inc
Charleston, South Carolina
Description: MVR Requirements for all Technicians SUMMARY Technicians install and service telephone, security, video, and internet systems, troubleshoot issues, and educate customers. Important information: Work Type: In-person only (remote work not available). Residency: Applicants must live within daily commuting distance. No relocation assistance is provided. Compensation: U.S.-based employment only; pay in U.S. Dollars. DUTIES & RESPONSIBILITES Complete all installations according to company and industry standards. Acquire and return equipment as directed. Maintain tools and vehicles; report any maintenance issues. Communicate with Dispatch on arrivals, departures, and any delays. Accurately complete daily reports and paperwork. Maintain a clean and organized work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all company & OSHA safety rules. Other duties as assigned. PGM25 Requirements: Competencies Technical Proficiency: Possess a strong understanding of cable systems, including installation techniques, troubleshooting methods, and maintenance procedures. Problem-Solving Skills: Ability to identify and resolve technical issues efficiently, using critical thinking and analytical skills. Customer Focus: Dedication to providing excellent customer service, addressing customer needs, and ensuring satisfaction. Communication Skills: Clear and effective communication with customers, team members, and supervisors, both verbally and in writing. Attention to Detail: Thoroughness and precision in performing installations, conducting tests, and maintaining records. Adaptability: Flexibility to work in various environments and adapt to changing priorities or challenges. Safety Consciousness: Commitment to following safety protocols and regulations to prevent accidents and ensure a safe working environment. Teamwork: Ability to collaborate with colleagues, share knowledge, and contribute to the overall success of the team. Continuous Learning: Eagerness to stay updated on industry advancements, new technologies, and best practices through ongoing training and self-education. SKILLS Install residential/commercial video, HIS, XHS, CDV installation knowledge (training provided). Strong customer service, time management and communications abilities. Due to the nature of our customer base, fluency in English (speaking and understanding) is required. Read and interpret operating instructions and procedures. Basic math, computer, and troubleshooting skills. Navigating and adjusting operating systems. Ability to identify and troubleshoot technical difficulties. Manage time effectively and work independently. EDUCATION / QUALIFICATIONS High School or GED preferred. Requires the successful completion of all pre-employment testing, acceptable driving record and active driver's license. Hold a valid driver's license. Be at least 21 years old. Have a minimum of three (3) years of driving history. Maintain an acceptable Motor Vehicle Record (MVR) with no major violations is required. Note: Insurance carriers may review up to seven (7) years of driving history to determine eligibility. Must be able to independently operate a motor vehicle. Due to the sensitive nature of our work inside customers' homes and businesses, all applicants must pass a comprehensive criminal background check. Felony convictions will result in disqualification. Misdemeanors will be evaluated individually; however, offenses involving theft, assault, battery, or drug distribution within the past seven (7) years will result in disqualification. COMPENSATION Paid hourly, with a potential production bonus based on work completed, experience, certifications, quality of work, punctuality, professionalism, and adherence to company standards. Benefits offered include Health, Dental, Vision, Long Term and Short-Term Disability Policies, Life Insurance (Company paid and optional voluntary), Aflac plans, and a 401(k) with a company match. PHYSICAL REQUIREMENTS Lift up to 100 lbs., climb ladders (up to 28 ft.) and work at heights. Use hand tools. Frequent stooping, bending and twisting required. Work indoors, outdoors, in confined spaces, and while exposed to varied weather. Drive during all weather conditions, daytime and nighttime. Madison Telecommunications is a Drug-Free Workplace. Pre-employment, post-accident and random drug screenings are mandatory. PIe903565b7ddc-9127
06/24/2026
Full time
Description: MVR Requirements for all Technicians SUMMARY Technicians install and service telephone, security, video, and internet systems, troubleshoot issues, and educate customers. Important information: Work Type: In-person only (remote work not available). Residency: Applicants must live within daily commuting distance. No relocation assistance is provided. Compensation: U.S.-based employment only; pay in U.S. Dollars. DUTIES & RESPONSIBILITES Complete all installations according to company and industry standards. Acquire and return equipment as directed. Maintain tools and vehicles; report any maintenance issues. Communicate with Dispatch on arrivals, departures, and any delays. Accurately complete daily reports and paperwork. Maintain a clean and organized work vehicle and immediately report maintenance issues to the Fleet Manager, if operating a company vehicle. Job requires local travel 100% of the time. Technical development training/certification is required; successful completion is mandatory to remain an active employee. Follow all company & OSHA safety rules. Other duties as assigned. PGM25 Requirements: Competencies Technical Proficiency: Possess a strong understanding of cable systems, including installation techniques, troubleshooting methods, and maintenance procedures. Problem-Solving Skills: Ability to identify and resolve technical issues efficiently, using critical thinking and analytical skills. Customer Focus: Dedication to providing excellent customer service, addressing customer needs, and ensuring satisfaction. Communication Skills: Clear and effective communication with customers, team members, and supervisors, both verbally and in writing. Attention to Detail: Thoroughness and precision in performing installations, conducting tests, and maintaining records. Adaptability: Flexibility to work in various environments and adapt to changing priorities or challenges. Safety Consciousness: Commitment to following safety protocols and regulations to prevent accidents and ensure a safe working environment. Teamwork: Ability to collaborate with colleagues, share knowledge, and contribute to the overall success of the team. Continuous Learning: Eagerness to stay updated on industry advancements, new technologies, and best practices through ongoing training and self-education. SKILLS Install residential/commercial video, HIS, XHS, CDV installation knowledge (training provided). Strong customer service, time management and communications abilities. Due to the nature of our customer base, fluency in English (speaking and understanding) is required. Read and interpret operating instructions and procedures. Basic math, computer, and troubleshooting skills. Navigating and adjusting operating systems. Ability to identify and troubleshoot technical difficulties. Manage time effectively and work independently. EDUCATION / QUALIFICATIONS High School or GED preferred. Requires the successful completion of all pre-employment testing, acceptable driving record and active driver's license. Hold a valid driver's license. Be at least 21 years old. Have a minimum of three (3) years of driving history. Maintain an acceptable Motor Vehicle Record (MVR) with no major violations is required. Note: Insurance carriers may review up to seven (7) years of driving history to determine eligibility. Must be able to independently operate a motor vehicle. Due to the sensitive nature of our work inside customers' homes and businesses, all applicants must pass a comprehensive criminal background check. Felony convictions will result in disqualification. Misdemeanors will be evaluated individually; however, offenses involving theft, assault, battery, or drug distribution within the past seven (7) years will result in disqualification. COMPENSATION Paid hourly, with a potential production bonus based on work completed, experience, certifications, quality of work, punctuality, professionalism, and adherence to company standards. Benefits offered include Health, Dental, Vision, Long Term and Short-Term Disability Policies, Life Insurance (Company paid and optional voluntary), Aflac plans, and a 401(k) with a company match. PHYSICAL REQUIREMENTS Lift up to 100 lbs., climb ladders (up to 28 ft.) and work at heights. Use hand tools. Frequent stooping, bending and twisting required. Work indoors, outdoors, in confined spaces, and while exposed to varied weather. Drive during all weather conditions, daytime and nighttime. Madison Telecommunications is a Drug-Free Workplace. Pre-employment, post-accident and random drug screenings are mandatory. PIe903565b7ddc-9127
Job Description Job Description JET Electrical Testing, LLC is seeking experienced electrical test technicians for the positions of Electrical Field Service Test Technician and Senior Electrical Field Service Test Technician . We are a growing IBEW (Union), electrical testing company located near Trenton in Hamilton, New Jersey. Most of our work is located in New Jersey, with some work in New York, Connecticut, Delaware and Pennsylvania. We feature good pay (including significant overtime), benefits (paid through the local union hall), training and a clear path for ascension. Overnight travel is rare. Requirements: Possess a high level of technical expertise as applied to electric transmission and distribution equipment facilities. Must be fully knowledgeable with the National Electrical Code, National Electric Safety Code, Fall Protection, LOTO, OSHA Regulation, Confined Spaces, ARC Flash, Shock Hazards, Safe Work Practices and are experienced working in energized high voltage facilities. A graduate Electrical Engineer or trained technician with at least ten (10) years of relevant experience. Able to read, modify and interpret all types of electrical drawing, schematics, wiring diagrams and logic diagrams. Familiar with all types of test equipment including, but not limited to, circuit breaker timing apparatus, high potential AC and DC test equipment, high current/low impedance ohmmeters, digital multi-meters, relay test apparatus, power quality metering. Possess good computer skills, including MS-Word, MS-Excel, Windows and be willing to learn new software packages as they appear. AutoCAD a plus but not expected. Will be required to perform the work in an IBEW union environment. Must have a valid and clean driver's license. Must have good work ethic. Good communication and interpersonal skills. Must have a clean record and be able to obtain a CDL, TWIC and/or similar document needed. Must pass Pre-hire Drug Screen and background check. Duties & Responsibilities (not limited to): Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Closing and opening of circuit breakers from local control switch. Closing and opening of circuit breakers from a SCADA system. Tripping of circuit breakers from a protective relay system. Operational verification for all internal circuit breaker controls and alarms. Verification of all AC and DC relay wiring. Verification of current transformer (CT) wiring ratio and polarity from the CT to the relays. Settings applied to all programmable relays and instruments (calculation of setting are by the System Protection Engineers). Simulation and verification of all potential device wiring CCVT's and PT's from the potential service to the relay or instrument connected to such devices. Verification of all systems associated with power transformers (load tap changers (LTC's), fans, pumps, alarms, sudden pressure relays, controls). Operational verification of electrical or mechanical safety interlock systems. Verification of SCADA inputs and outputs. Operational verification of auxiliary power systems including, generators, bus transfer and other equipment. Operational verification of relay protective schemes including, breaker failure, transfer trip (Tone and Fiber), bus differential, transformer differential, line protection schemes. Mark up of project drawings to reflect as built/modified conditions includes as required: cable diagrams, schematics, wiring diagrams, relay rack arrangements and physical layout drawings; actual CAD updates will be performed by others from marked prints. Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Generate technical reports detailing services provided, problems found, and corrective action taken or recommended. Electronic relay setting review and modification (SEL, Multilin, Siprotec, etc.) Circuit tracing and verification. Additional activities on an as required basis such as but not limited to: Electrical tests (Hi-pot, Doble, TTR, Ductor, Megger) Battery voltage regulator set-up. Battery electrolyte quality. Aux power transformer tap set-up. Operational verification of both manual and motor operated disconnects. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair.
06/24/2026
Full time
Job Description Job Description JET Electrical Testing, LLC is seeking experienced electrical test technicians for the positions of Electrical Field Service Test Technician and Senior Electrical Field Service Test Technician . We are a growing IBEW (Union), electrical testing company located near Trenton in Hamilton, New Jersey. Most of our work is located in New Jersey, with some work in New York, Connecticut, Delaware and Pennsylvania. We feature good pay (including significant overtime), benefits (paid through the local union hall), training and a clear path for ascension. Overnight travel is rare. Requirements: Possess a high level of technical expertise as applied to electric transmission and distribution equipment facilities. Must be fully knowledgeable with the National Electrical Code, National Electric Safety Code, Fall Protection, LOTO, OSHA Regulation, Confined Spaces, ARC Flash, Shock Hazards, Safe Work Practices and are experienced working in energized high voltage facilities. A graduate Electrical Engineer or trained technician with at least ten (10) years of relevant experience. Able to read, modify and interpret all types of electrical drawing, schematics, wiring diagrams and logic diagrams. Familiar with all types of test equipment including, but not limited to, circuit breaker timing apparatus, high potential AC and DC test equipment, high current/low impedance ohmmeters, digital multi-meters, relay test apparatus, power quality metering. Possess good computer skills, including MS-Word, MS-Excel, Windows and be willing to learn new software packages as they appear. AutoCAD a plus but not expected. Will be required to perform the work in an IBEW union environment. Must have a valid and clean driver's license. Must have good work ethic. Good communication and interpersonal skills. Must have a clean record and be able to obtain a CDL, TWIC and/or similar document needed. Must pass Pre-hire Drug Screen and background check. Duties & Responsibilities (not limited to): Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Closing and opening of circuit breakers from local control switch. Closing and opening of circuit breakers from a SCADA system. Tripping of circuit breakers from a protective relay system. Operational verification for all internal circuit breaker controls and alarms. Verification of all AC and DC relay wiring. Verification of current transformer (CT) wiring ratio and polarity from the CT to the relays. Settings applied to all programmable relays and instruments (calculation of setting are by the System Protection Engineers). Simulation and verification of all potential device wiring CCVT's and PT's from the potential service to the relay or instrument connected to such devices. Verification of all systems associated with power transformers (load tap changers (LTC's), fans, pumps, alarms, sudden pressure relays, controls). Operational verification of electrical or mechanical safety interlock systems. Verification of SCADA inputs and outputs. Operational verification of auxiliary power systems including, generators, bus transfer and other equipment. Operational verification of relay protective schemes including, breaker failure, transfer trip (Tone and Fiber), bus differential, transformer differential, line protection schemes. Mark up of project drawings to reflect as built/modified conditions includes as required: cable diagrams, schematics, wiring diagrams, relay rack arrangements and physical layout drawings; actual CAD updates will be performed by others from marked prints. Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Generate technical reports detailing services provided, problems found, and corrective action taken or recommended. Electronic relay setting review and modification (SEL, Multilin, Siprotec, etc.) Circuit tracing and verification. Additional activities on an as required basis such as but not limited to: Electrical tests (Hi-pot, Doble, TTR, Ductor, Megger) Battery voltage regulator set-up. Battery electrolyte quality. Aux power transformer tap set-up. Operational verification of both manual and motor operated disconnects. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair.
Job Description Job Description Mr. Spring Garage Doors is seeking a skilled and motivated Garage Door Technician to join our team. WE ARE LOOKING FOR SOMEONE EXPERIENCED IN THE GARAGE DOOR SERVICE TECHNICIAN POSITION. We are looking for someone with high motivation to become a top technician within our company. As an experienced technician, you will be responsible for service/maintenance and installation/replacement of residential garage doors and hardware. You will assist in training, selling each job on-site, and collecting payments. Technicians travel to various service calls throughout the day around the metro area. Each day will be different, you will be interacting with different customers on a daily basis, while servicing and installing new products. A patient and respectful attitude is a must while representing Mr. Spring. Mr. Spring is a small, but fast growing company that has a lot of opportunity for personal growth internally. As an experienced technician, you will start off immediately on a commission based system. Responsibilities : -Install new garage doors and/or garage door openers for residential customers -Educate customers on upgraded parts and services -Assemble and/or fabricate mechanical components or machine parts. -Adjust equipment to ensure optimal performance -Install springs, sections, or slats -Replace worn or broken door parts -Disassemble equipment for maintenance or repair -Remove parts or components from equipment -Install hardware or other interior fixtures -Run wiring to connect equipment -Test and/or lubricate mechanical equipment to ensure its functioning properly. -Document operational activities -Collect payments for goods or services. Job Requirements : -Good mechanical and technical skills (hammer, drill, tape measure, etc.) is helpful -Ability to learn and safely use various tools in various settings (power tools, hand tools, scissor lifts, and other tools) -Ability to lift and carry heavy objects 75+ pounds and work in various weather conditions. -Able to stand on ladder for extended periods of time -Excellent interpersonal communication skills to communicate with customers and collaborate with others under any conditions -A valid driver's license and safe driving record (Work truck will be provided) -Must pass pre-employment background check -High school diploma or equivalent is preferred -Exceptional customer service and communication skills. -Willingness to work flexible hours, including weekends and evenings, as needed. -Excellent problem-solving and diagnostic abilities. -Reliable and self motivated
06/24/2026
Full time
Job Description Job Description Mr. Spring Garage Doors is seeking a skilled and motivated Garage Door Technician to join our team. WE ARE LOOKING FOR SOMEONE EXPERIENCED IN THE GARAGE DOOR SERVICE TECHNICIAN POSITION. We are looking for someone with high motivation to become a top technician within our company. As an experienced technician, you will be responsible for service/maintenance and installation/replacement of residential garage doors and hardware. You will assist in training, selling each job on-site, and collecting payments. Technicians travel to various service calls throughout the day around the metro area. Each day will be different, you will be interacting with different customers on a daily basis, while servicing and installing new products. A patient and respectful attitude is a must while representing Mr. Spring. Mr. Spring is a small, but fast growing company that has a lot of opportunity for personal growth internally. As an experienced technician, you will start off immediately on a commission based system. Responsibilities : -Install new garage doors and/or garage door openers for residential customers -Educate customers on upgraded parts and services -Assemble and/or fabricate mechanical components or machine parts. -Adjust equipment to ensure optimal performance -Install springs, sections, or slats -Replace worn or broken door parts -Disassemble equipment for maintenance or repair -Remove parts or components from equipment -Install hardware or other interior fixtures -Run wiring to connect equipment -Test and/or lubricate mechanical equipment to ensure its functioning properly. -Document operational activities -Collect payments for goods or services. Job Requirements : -Good mechanical and technical skills (hammer, drill, tape measure, etc.) is helpful -Ability to learn and safely use various tools in various settings (power tools, hand tools, scissor lifts, and other tools) -Ability to lift and carry heavy objects 75+ pounds and work in various weather conditions. -Able to stand on ladder for extended periods of time -Excellent interpersonal communication skills to communicate with customers and collaborate with others under any conditions -A valid driver's license and safe driving record (Work truck will be provided) -Must pass pre-employment background check -High school diploma or equivalent is preferred -Exceptional customer service and communication skills. -Willingness to work flexible hours, including weekends and evenings, as needed. -Excellent problem-solving and diagnostic abilities. -Reliable and self motivated
Job Description Job Description Seeking a motivated and dependable Low VoltageTechnician to assist with all kinds of Telecommuniction Installs, maintenance and troubleshooting. Preferred experience: Run, terminate and label cables (Cat5/Cat 6,Fiber) Fiber Optic Installs and testing experience a plus Install and test equipment such as Routers,Patch Panels Switches, Phones and Cameras Communicate professionally with customers and team members Ability to work independently and within a team setting Maintain job site cleanliness and follow safety standards Basic knowledge and ability to work with hand tool Reliable transportation and Valid Driver's License Ability to lift up to 50 lbs Why Join us: Hands on training and skill development provided for motivated candiate Competitive hourly pay based on experience Paid Holidays Opportunity to grow into a long term role
06/24/2026
Full time
Job Description Job Description Seeking a motivated and dependable Low VoltageTechnician to assist with all kinds of Telecommuniction Installs, maintenance and troubleshooting. Preferred experience: Run, terminate and label cables (Cat5/Cat 6,Fiber) Fiber Optic Installs and testing experience a plus Install and test equipment such as Routers,Patch Panels Switches, Phones and Cameras Communicate professionally with customers and team members Ability to work independently and within a team setting Maintain job site cleanliness and follow safety standards Basic knowledge and ability to work with hand tool Reliable transportation and Valid Driver's License Ability to lift up to 50 lbs Why Join us: Hands on training and skill development provided for motivated candiate Competitive hourly pay based on experience Paid Holidays Opportunity to grow into a long term role
Job Description Summary GE Vernova Onshore wind power capacity is growing fast and will continue to rise steadily in the coming years. As we continue to grow and develop new and existing wind sites, Onshore Wind has an ongoing need to build our field teams with the right individuals that possess a willingness to learn, contribute and grow. As part of GE Vernova, training and development, safety, and career progression lead our initiatives to provide opportunity and growth in all areas. Title: Senior Wind Technician Job Description Role Summary/Purpose The Senior Wind Hub Technician position requires local travel within the hub. The Senior Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, safety, quality control and warranty repair(s). The Senior Wind Hub Technician partners and communicates with the Site Lead and Manager to execute on contract requirements and timelines and ensures alignment with GE Vernova excellence! Essential Responsibilities As the Senior Wind Hub Technician, you will: Work with site/hub leadership to execute contractual obligations per customer requirements and activities set forth daily, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator. Apply extensive understanding of variable pitch & speed turbines and converter parts. Read, understand, and explain schematics, drawings, technical manuals, procedures, and regulations. Adhere to all Environmental Health and Safety processes and regulations and all applicable compliance requirements. Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines. Help in all areas of site operations as directed by manager with minimal supervision, observing all safety requirements. Effectively perform diagnostic analysis and generate plan for timely resolution. Document all work performed using computer-based service reporting procedures and Work with and respond to GE Vernova's remote operations center when necessary. Help in all areas of site operations as directed by manager, and mentor peers. Qualifications/Requirements High School Diploma or GED Basic computer skills Ability to pass Technical Knowledge Assessment 4+ years of wind trouble-shooting experience and 1+ year EHS, SQC, Lead role, or 5+ years of wind trouble-shooting experience Requirements Must have and maintain a valid driver's license Willingness to travel up to 100% of the time Handle repetitive weight - 50 lbs. and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Effectively prioritize work according to contract obligations Ability and willingness to take initiative, and work without direct supervision, and Flexibility to work rotating shift schedules, and on-call per site needs. Occasional overnights may be required per hub needs. Desired Characteristics Associate or bachelor's degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on May 04, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
06/24/2026
Full time
Job Description Summary GE Vernova Onshore wind power capacity is growing fast and will continue to rise steadily in the coming years. As we continue to grow and develop new and existing wind sites, Onshore Wind has an ongoing need to build our field teams with the right individuals that possess a willingness to learn, contribute and grow. As part of GE Vernova, training and development, safety, and career progression lead our initiatives to provide opportunity and growth in all areas. Title: Senior Wind Technician Job Description Role Summary/Purpose The Senior Wind Hub Technician position requires local travel within the hub. The Senior Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, safety, quality control and warranty repair(s). The Senior Wind Hub Technician partners and communicates with the Site Lead and Manager to execute on contract requirements and timelines and ensures alignment with GE Vernova excellence! Essential Responsibilities As the Senior Wind Hub Technician, you will: Work with site/hub leadership to execute contractual obligations per customer requirements and activities set forth daily, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator. Apply extensive understanding of variable pitch & speed turbines and converter parts. Read, understand, and explain schematics, drawings, technical manuals, procedures, and regulations. Adhere to all Environmental Health and Safety processes and regulations and all applicable compliance requirements. Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines. Help in all areas of site operations as directed by manager with minimal supervision, observing all safety requirements. Effectively perform diagnostic analysis and generate plan for timely resolution. Document all work performed using computer-based service reporting procedures and Work with and respond to GE Vernova's remote operations center when necessary. Help in all areas of site operations as directed by manager, and mentor peers. Qualifications/Requirements High School Diploma or GED Basic computer skills Ability to pass Technical Knowledge Assessment 4+ years of wind trouble-shooting experience and 1+ year EHS, SQC, Lead role, or 5+ years of wind trouble-shooting experience Requirements Must have and maintain a valid driver's license Willingness to travel up to 100% of the time Handle repetitive weight - 50 lbs. and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Effectively prioritize work according to contract obligations Ability and willingness to take initiative, and work without direct supervision, and Flexibility to work rotating shift schedules, and on-call per site needs. Occasional overnights may be required per hub needs. Desired Characteristics Associate or bachelor's degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on May 04, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
Job Description Job Description POSITION OVERVIEW: Reporting to the Field Manager, the Welder/Pipefitter provides welding, fabricating, and fitting services for boiler repairs and assembly with a focus on sound welds for steam and gas systems. As part of the Service Team, this role also participates in mechanical work such as millwrighting, pump change outs, opening boilers, pipe fitting and general labor. In this role, you will be responsible for creating a positive relationship with customers as you professionally support the maintenance, repair and installation of commercial and industrial equipment in the Sioux City IA. area. WHY JOIN US? We are growing! Competitive compensation package, variable pay Retirement Savings Plan with Employer matching 2x employee contribution up to 4% of earnings Co-pay Benefit Plan that includes coverage for employee, life insurance, AD&D, Short and long term disability, hospital, prescription drugs, healthcare and dental care Diverse customer sectors and experience -> continuous learning opportunity Professionally managed with a friendly culture Experienced and highly dedicated office support team Team approach with strong customer service orientation POSITION REQUIREMENTS: Welding and Fabricating Main Activities: Engage in welding tasks on boiler components following manufacturer-provided templates and retrofitting parts as needed. Pipe welder/code welder - some training provided Fabricate parts as needed. Perform pressure tests on pressure vessel welds. Complete weld preparation by grinding or cutting. Weld following all gas metal arc, shielded metal arc, or gas tungsten arc welding procedures and processes. Assess equipment, structures, materials and job specifications for appropriate welding positions and methods. Clean weld utilizing grinders and/or wire wheels as necessary. Provide support for mechanical millwrighting, pump change outs, opening boilers, and pipe fitting. Identify potential issues and hazards as proactively as possible. Perform general labor, as needed. Submit daily work orders including parts used out of inventory, time spent on job, and work performed. Other duties as required. Customer Service Main Activities: Develop and maintain good customer relationships and represent and promote Plains Mechanical in a professional manner Build relationships with customers so that they are comfortable with work recommendations and confident in the services being performed. Keep customers updated throughout the troubleshooting and repair process. Meet with the customer after each service visit to ensure they are satisfied with the job performed and to make proactive recommendations for future work. Other duties as required. Safety and Professionalism Main Activities: Employ a safety-first mindset and contribute to a safe environment daily. Fully participate in all required training sessions related to position. Provide professional feedback on received training and maintain an awareness of any expiry dates related to training requirements. Support and train new or less experienced colleagues on various welding processes as required. Ensure compliance with all safety training, policies, practices and procedures and consistently apply on the job to create a safe work environment. Monitor work environment for hazards and maintain healthy ventilation levels to avoid particle or gas inhalation. Ensure proper use of personal protective equipment and the maintenance of engineered controls (e.g. guards). Report any potential hazards (e.g. faulty equipment) or potentially hazardous conditions to management immediately. Ensure good housekeeping in all workspaces. Other duties as required. TRAINING, EXPERIENCE AND QUALIFICATIONS : Welding Certification - we are willing to train the right candidate. Must pass visual - 6G fixed position 6010 root 7018 fill and cover pass. Strong mechanical aptitude with experience in pipe fitting and fabrication. Knowledge of industrial boiler systems. Ability to confidently use applicable tools and machinery. Knowledge of ASME Code. Valid E Driver's License to travel to customer sites. CORE VALUES, COMPETENCIES AND CHARACTERISITCS: Exceptional attention to detail with a strong focus on safety. The ability to read and understand technical documents, safety rules, blueprints, manuals, and related documents. Basic mathematical skills. A thorough knowledge of welding techniques and related tools. Customer service ability. Time management skills. About us Plains Mechanical Services is a full-service boiler company providing sales, service installation, and repair of boilers, pressure vessels, piping systems, and industrial combustion applications. With over two decades of experience since our founding in 1994, we specialize in full-service boiler, burner, and boiler room installation, maintenance, and repair services for all steam and hydronic systems, fuel and process piping installations, and industrial combustion applications. We are the only one-stop-shop for boiler room equipment sales, service, and rentals in the area. Our reputation is built on delivering exceptional customer service, and we attribute this to our valued product partners, knowledgeable staff, and dedicated field service team. We serve businesses in Iowa, South Dakota, Nebraska, and Minnesota, and take pride in being a trusted partner for all your boiler room needs. We are a Thermogenics company. The Company provides best-in-class parts and 24/7 service support delivered via highly trained technicians and manages a fleet of unique rental equipment to serve temporary or emergency needs. The product portfolio is primarily used for industrial, commercial and institutional applications across North America. Thermogenics is a leading manufacturer of coiled tube steam, hot water and thermal fluid boilers and related equipment. With its comprehensive product and service offering, Thermogenics functions as a one-stop shop for all of its customers' most complex steam and heating requirements. The Company operates from its head office in Aurora, ON and maintains sales and service operations in Cincinnati, OH, Hartford, CT, Jacksonville, FL, Orlando, FL., Ottawa, ON and Sioux City IA. Location: Sioux City, IA Job Type: Full-time Pay: $30.00 - $40.00 per hour Benefits: 401(k) matching Employee assistance program Referral program Tuition reimbursement Schedule: 8 hour shift Supplemental pay types: Bonus opportunities Work Location: In person
06/24/2026
Full time
Job Description Job Description POSITION OVERVIEW: Reporting to the Field Manager, the Welder/Pipefitter provides welding, fabricating, and fitting services for boiler repairs and assembly with a focus on sound welds for steam and gas systems. As part of the Service Team, this role also participates in mechanical work such as millwrighting, pump change outs, opening boilers, pipe fitting and general labor. In this role, you will be responsible for creating a positive relationship with customers as you professionally support the maintenance, repair and installation of commercial and industrial equipment in the Sioux City IA. area. WHY JOIN US? We are growing! Competitive compensation package, variable pay Retirement Savings Plan with Employer matching 2x employee contribution up to 4% of earnings Co-pay Benefit Plan that includes coverage for employee, life insurance, AD&D, Short and long term disability, hospital, prescription drugs, healthcare and dental care Diverse customer sectors and experience -> continuous learning opportunity Professionally managed with a friendly culture Experienced and highly dedicated office support team Team approach with strong customer service orientation POSITION REQUIREMENTS: Welding and Fabricating Main Activities: Engage in welding tasks on boiler components following manufacturer-provided templates and retrofitting parts as needed. Pipe welder/code welder - some training provided Fabricate parts as needed. Perform pressure tests on pressure vessel welds. Complete weld preparation by grinding or cutting. Weld following all gas metal arc, shielded metal arc, or gas tungsten arc welding procedures and processes. Assess equipment, structures, materials and job specifications for appropriate welding positions and methods. Clean weld utilizing grinders and/or wire wheels as necessary. Provide support for mechanical millwrighting, pump change outs, opening boilers, and pipe fitting. Identify potential issues and hazards as proactively as possible. Perform general labor, as needed. Submit daily work orders including parts used out of inventory, time spent on job, and work performed. Other duties as required. Customer Service Main Activities: Develop and maintain good customer relationships and represent and promote Plains Mechanical in a professional manner Build relationships with customers so that they are comfortable with work recommendations and confident in the services being performed. Keep customers updated throughout the troubleshooting and repair process. Meet with the customer after each service visit to ensure they are satisfied with the job performed and to make proactive recommendations for future work. Other duties as required. Safety and Professionalism Main Activities: Employ a safety-first mindset and contribute to a safe environment daily. Fully participate in all required training sessions related to position. Provide professional feedback on received training and maintain an awareness of any expiry dates related to training requirements. Support and train new or less experienced colleagues on various welding processes as required. Ensure compliance with all safety training, policies, practices and procedures and consistently apply on the job to create a safe work environment. Monitor work environment for hazards and maintain healthy ventilation levels to avoid particle or gas inhalation. Ensure proper use of personal protective equipment and the maintenance of engineered controls (e.g. guards). Report any potential hazards (e.g. faulty equipment) or potentially hazardous conditions to management immediately. Ensure good housekeeping in all workspaces. Other duties as required. TRAINING, EXPERIENCE AND QUALIFICATIONS : Welding Certification - we are willing to train the right candidate. Must pass visual - 6G fixed position 6010 root 7018 fill and cover pass. Strong mechanical aptitude with experience in pipe fitting and fabrication. Knowledge of industrial boiler systems. Ability to confidently use applicable tools and machinery. Knowledge of ASME Code. Valid E Driver's License to travel to customer sites. CORE VALUES, COMPETENCIES AND CHARACTERISITCS: Exceptional attention to detail with a strong focus on safety. The ability to read and understand technical documents, safety rules, blueprints, manuals, and related documents. Basic mathematical skills. A thorough knowledge of welding techniques and related tools. Customer service ability. Time management skills. About us Plains Mechanical Services is a full-service boiler company providing sales, service installation, and repair of boilers, pressure vessels, piping systems, and industrial combustion applications. With over two decades of experience since our founding in 1994, we specialize in full-service boiler, burner, and boiler room installation, maintenance, and repair services for all steam and hydronic systems, fuel and process piping installations, and industrial combustion applications. We are the only one-stop-shop for boiler room equipment sales, service, and rentals in the area. Our reputation is built on delivering exceptional customer service, and we attribute this to our valued product partners, knowledgeable staff, and dedicated field service team. We serve businesses in Iowa, South Dakota, Nebraska, and Minnesota, and take pride in being a trusted partner for all your boiler room needs. We are a Thermogenics company. The Company provides best-in-class parts and 24/7 service support delivered via highly trained technicians and manages a fleet of unique rental equipment to serve temporary or emergency needs. The product portfolio is primarily used for industrial, commercial and institutional applications across North America. Thermogenics is a leading manufacturer of coiled tube steam, hot water and thermal fluid boilers and related equipment. With its comprehensive product and service offering, Thermogenics functions as a one-stop shop for all of its customers' most complex steam and heating requirements. The Company operates from its head office in Aurora, ON and maintains sales and service operations in Cincinnati, OH, Hartford, CT, Jacksonville, FL, Orlando, FL., Ottawa, ON and Sioux City IA. Location: Sioux City, IA Job Type: Full-time Pay: $30.00 - $40.00 per hour Benefits: 401(k) matching Employee assistance program Referral program Tuition reimbursement Schedule: 8 hour shift Supplemental pay types: Bonus opportunities Work Location: In person
Isuzu Veterans Apprenticeship Program (IVAP)
Birmingham, Alabama
Job Description Job Description Truckworx Isuzu of Birmingham, Alabama, is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: Wheeled vehicle maintenance Diesel mechanics Heavy equipment maintenance Automotive repair Aircraft maintenance Generator maintenance Fleet maintenance Military maintenance supervision Requirements Transitioning Service Member or U.S. Military Veteran status 35 years of military or civilian technician work experience Honorable military discharge or Commanders Statement of Service Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems Ability to provide work references Clean driving record, as attested by the applicant Ability to complete the IVAP technical assessment Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: Diesel engine maintenance or repair experience Experience with commercial trucks, fleet vehicles, or heavy equipment Familiarity with diagnostic tools, hand tools, and shop equipment Experience working with electrical, braking, suspension, HVAC, or driveline systems ASE certifications, technical school training, or military maintenance training Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights Potential full-time employment with a participating Isuzu dealership Program designed specifically to support Transitioning Service Members and U.S. Military Veterans Participation in a U.S. Department of Labor and GI Bill-approved Registered Apprenticeship program, where eligible Eligible Veterans may apply for and receive GI Bill benefits during the apprenticeship, where eligible Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.
06/24/2026
Full time
Job Description Job Description Truckworx Isuzu of Birmingham, Alabama, is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: Wheeled vehicle maintenance Diesel mechanics Heavy equipment maintenance Automotive repair Aircraft maintenance Generator maintenance Fleet maintenance Military maintenance supervision Requirements Transitioning Service Member or U.S. Military Veteran status 35 years of military or civilian technician work experience Honorable military discharge or Commanders Statement of Service Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems Ability to provide work references Clean driving record, as attested by the applicant Ability to complete the IVAP technical assessment Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: Diesel engine maintenance or repair experience Experience with commercial trucks, fleet vehicles, or heavy equipment Familiarity with diagnostic tools, hand tools, and shop equipment Experience working with electrical, braking, suspension, HVAC, or driveline systems ASE certifications, technical school training, or military maintenance training Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights Potential full-time employment with a participating Isuzu dealership Program designed specifically to support Transitioning Service Members and U.S. Military Veterans Participation in a U.S. Department of Labor and GI Bill-approved Registered Apprenticeship program, where eligible Eligible Veterans may apply for and receive GI Bill benefits during the apprenticeship, where eligible Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.
