Description :• Job Summary A member of the Central Stores team responsible for ordering, receiving, storage, distribution of supplies, equipment and instrumentation used in patient care utilizing a materials procurement system(Lawson) and OMNI supply cabinets also includes setups, kits and carts. The position is a team member that works in a fast pace environment supporting any supply needs for the areas we serve to achieve excellence in quality of patient care which supports the department mission. This position also is involved in goal setting, and process improvement. • Job Requirements Education Required: High School Diploma or Equivalent Experience No Prior Experience Required Skills Understanding and compliance with Emergency and disaster preparedness, planning, and response Utilizes asset tracking systems rental company websites for equipment. Understanding and compliance with regulatory processes Utilize all functions of OMNI supply Cabinets including troubleshooting Working knowledge of supplies and equipment. Perform all transactions as needed on our materials procurement system accurately and efficiently including use of handheld devices Licensure/Certification/Registration N/AEducation: Required: High school diploma or equivalent Experience: No prior experience required Skills: • Excellent communication skills • Knowledge of supply inventories • Basic Mircosfot Office skills Licensure/Certification/Registration: N/A
01/09/2026
Full time
Description :• Job Summary A member of the Central Stores team responsible for ordering, receiving, storage, distribution of supplies, equipment and instrumentation used in patient care utilizing a materials procurement system(Lawson) and OMNI supply cabinets also includes setups, kits and carts. The position is a team member that works in a fast pace environment supporting any supply needs for the areas we serve to achieve excellence in quality of patient care which supports the department mission. This position also is involved in goal setting, and process improvement. • Job Requirements Education Required: High School Diploma or Equivalent Experience No Prior Experience Required Skills Understanding and compliance with Emergency and disaster preparedness, planning, and response Utilizes asset tracking systems rental company websites for equipment. Understanding and compliance with regulatory processes Utilize all functions of OMNI supply Cabinets including troubleshooting Working knowledge of supplies and equipment. Perform all transactions as needed on our materials procurement system accurately and efficiently including use of handheld devices Licensure/Certification/Registration N/AEducation: Required: High school diploma or equivalent Experience: No prior experience required Skills: • Excellent communication skills • Knowledge of supply inventories • Basic Mircosfot Office skills Licensure/Certification/Registration: N/A
Are you a passionate and experienced Central Service Technician (CST)? We're seeking top talent to join our world-class healthcare team. Apply now and make a meaningful impact. What the job is like • Pay: $28.00 per hour • Schedule: Per diem; minimum of 2 shifts per week or as needed • Shifts: Evenings or nights shifts (including weekend and holidays) • Location: Torrance, CA • Duration: 26 weeks initially What's in it for you • Competitive pay • Great working location • Health, vision, dental, and life insurance • Refer-a-friend bonus • Weekly payroll • 24-hour accessibility • Personalized service MINIMUM QUALIFICATIONS Education Qualifications: • High School Diploma or equivalent Licenses and Certifications: • Certified Registered Central Service Technician (CRCST) • AHA BLS • MAB or CPI • LA City Fire & Life Safety Card (must be LA City Fire) Experience: • Minimum of one (1) year experience as a Central Service Technician in a level 1 Trauma Center • Experience with surgical instrumentation, equipment, and sterile processing workflows Experience: • Minimum of one (1) year experience as a Central Service Technician in a level 1 Trauma Center • Experience with surgical instrumentation, equipment, and sterile processing workflows Responsibilities: • Perform cleaning, decontamination, assembly, packaging, and distribution of surgical instruments and supplies • Ensure instruments and equipment are properly prepared for surgical procedures • Support operating rooms and related departments with timely instrument delivery • Adhere to infection control, safety, and regulatory standards • Work every other weekend and holidays as required • Maintain accurate documentation and follow departmental protocols Who we are: Power Personnel has been working with healthcare professionals like you since 1994. We are the experts in healthcare staffing in Northern California. That's why so many hospitals, clinics, and healthcare facilities rely on us to fill critical positions. If you want competitive pay, excellent working conditions, and a team that supports you, Power Personnel is the place to be! Refer a friend at and get a $250 bonus for every referral! To qualify for the bonus, the referred individual must work at least 20 shifts.
01/09/2026
Full time
Are you a passionate and experienced Central Service Technician (CST)? We're seeking top talent to join our world-class healthcare team. Apply now and make a meaningful impact. What the job is like • Pay: $28.00 per hour • Schedule: Per diem; minimum of 2 shifts per week or as needed • Shifts: Evenings or nights shifts (including weekend and holidays) • Location: Torrance, CA • Duration: 26 weeks initially What's in it for you • Competitive pay • Great working location • Health, vision, dental, and life insurance • Refer-a-friend bonus • Weekly payroll • 24-hour accessibility • Personalized service MINIMUM QUALIFICATIONS Education Qualifications: • High School Diploma or equivalent Licenses and Certifications: • Certified Registered Central Service Technician (CRCST) • AHA BLS • MAB or CPI • LA City Fire & Life Safety Card (must be LA City Fire) Experience: • Minimum of one (1) year experience as a Central Service Technician in a level 1 Trauma Center • Experience with surgical instrumentation, equipment, and sterile processing workflows Experience: • Minimum of one (1) year experience as a Central Service Technician in a level 1 Trauma Center • Experience with surgical instrumentation, equipment, and sterile processing workflows Responsibilities: • Perform cleaning, decontamination, assembly, packaging, and distribution of surgical instruments and supplies • Ensure instruments and equipment are properly prepared for surgical procedures • Support operating rooms and related departments with timely instrument delivery • Adhere to infection control, safety, and regulatory standards • Work every other weekend and holidays as required • Maintain accurate documentation and follow departmental protocols Who we are: Power Personnel has been working with healthcare professionals like you since 1994. We are the experts in healthcare staffing in Northern California. That's why so many hospitals, clinics, and healthcare facilities rely on us to fill critical positions. If you want competitive pay, excellent working conditions, and a team that supports you, Power Personnel is the place to be! Refer a friend at and get a $250 bonus for every referral! To qualify for the bonus, the referred individual must work at least 20 shifts.
Description: DUTIES AND RESPONSIBILITIES Responsible for supervising the Metrology technical personnel calibrating variety of test instruments for one or more skill areas, such as: Ø Electrical Equipment Ø Dimensional Equipment Ø Industrial / Mechanical Equipment Ø Temperature Equipment Ø RF/Optical Equipment Calibration Process Implement the applicable requirements, customer requirements, QM and CSD. Capable in developing formal plans for facilities and equipment, personnel training and certification, measurement standards and traceability. Ability to recognize and address non-conformances and file Corrective Action Reports. Provide administration in all areas of service to facilitate both quality and quick turnaround. Capable in conducting workshops and classes for personnel / technician training. Conducts pre-evaluation and inspections to all customer equipment such as visual checking, cleaning, functional and self-testing. Ensures that maintenance, minor repair and calibration of equipment are carried out and completed based on the set schedule in accordance with customer specifications and requirements. Communicates the status and proper calibration updates to the concerned personnel or group on a timely manner; regularly collaborates with other technicians, CSRs, Sales and Purchasing. Analyzes data, uncertainty computation, uploading of data and report generation. Ensure that all calibration data is accurate and sufficient to take into account for complete reproducibility. Ensures compliance to quality standard based on existing and approved quality procedures. Ensure that environmental conditions are adequate for the work performed. Ensure that the sensitivity of the environmental conditions and accuracy of the records in the values shown are relevant in the calibration certificates. Ensure that the version used of the calibration procedure is the most recent and suitable for the instrument under test. Transport the instruments (customer and MPC), including reference standards, reference materials, software and hardware, so that it does not adversely affect the accuracy of the instrument does not degrade the net value of the instrument. Notify the Quality Assurance Manager, the customer, Division Manager and Sales Manager when an instrument is lost, damaged at any point of the service, or stolen having it under the protection of MPC. Ensure that the nomenclature and identification of the instruments is accurate and complete in CMS assuring it match with instrument identification. Ensure that calibration certificates contain accurate information and that all information required by the customer is documented in the report. Verify reported results, used calibration procedures, approved functions, reference standards used and identification of traceable patterns for accuracy and reproducibility. Ensure the safe handling, use and transport of customer and MPC equipment at all times during field service work. Seek supervision and / or assistance from the client to operate and / or calibrate the client's equipment which is installed, assembled and / or configured in the operation line. Study the equipment configuration, the operation process and the safety features of the unit before calibration, as long as it is part of an assembly of the machine or a production line. Protects and completes the necessary documentation related to field work, including the documentation in the worksheets, field service order form, abuse, misuse and / or mishandling of instruments and equipment, as well as laptops and computers. Ensure that the calibration data is accurate and sufficient to allow a complete reproducibility. Participate or support during accreditation or customer assessment as required. Perform the activities of qualified technician in calibration and / or repair according to the list of authorized technical capacity. Technician has the responsibility to stop work operation any time non-conformity is identify; Reports non-conformity to immediate superior, Lab Manager, Sales & CSR that was identified during the pre-evaluation and inspection process. Other Lab Manager has the authority and resources needed to carry out their duties, including: Implementation, maintenance and improvement of the management system; Identification of deviations from the management system or from the procedures for performing laboratory activities; Initiation of actions to prevent or minimize such deviations; Reporting to laboratory management on the performance of the management system and any need for improvement; Ensuring the effectiveness of laboratory activities. Ability to write procedures, train personnel, capable in managing company instrumentation, good housekeeping skills, capable in computer database management for company instruments. Responsible for the control of standards maintenance and intermediate checks of company equipment. Travels regionally or out of the country to perform field calibration work. Assists in the planning and scheduling of calibration workload when input is deemed necessary. Coordinates and responds promptly to customer inquiries and provides technical support and advice as required; coordination should be supported with factual information. Maintains accurate records of all activities and prepares technical reports with recommendation as applicable. Works with the Department in setting general goals and develops, supports and implements plans to hit identified targets; recommends improvement to support current operation and related processes Observes safety precautions and quality standard in the performance of task and complies with the company directives and policies; observes proper communication practices and manages confidentiality of information within and outside the group If the Lab Manager does not meet Tech 3 Dimensional and Electrical requirements, then there must be another technician at a Tech 3 Dimensional level that can report to the Lab Manager. Requirements: The professional qualifications required and the experience necessary to effectively complete the responsibilities of this position. Education: - Educational attainment gained from Technical or other related courses, preferably in Metrology, Instrumentation, Electronics or its equivalent. Training: - Complete the QMS exams 101, 102, 103, 104, 105, 201 and 401 with 70% minimum score. - ESDC Teamsite Module, to be completed within 3 days of commencing employment. - System / Software development system / Software modification. - Qualification and Certification. - -Basic Trouble Shooting and Repair Techniques. Work Experience: - Minimum 7 years of metrology experience and/or years of audit/ quality experience. - Meets all requirements of either an Electronic or Dimensional Supervisor. Knowledge, Skills and Ability: Demonstrates good verbal communication, good written skills Knowledgeable in calibration procedures, computation of uncertainty and computer applications. Must have keen eye for quality and details, basic problem solving techniques. Familiar with techniques and tools associated with ISO/IEC 17025. Team player, Trustworthy, Service oriented and can manage priorities. Ability to drive four-wheel vehicle (w/ valid driver's license) is an advantage. PI4a619f44454b-0875
01/09/2026
Full time
Description: DUTIES AND RESPONSIBILITIES Responsible for supervising the Metrology technical personnel calibrating variety of test instruments for one or more skill areas, such as: Ø Electrical Equipment Ø Dimensional Equipment Ø Industrial / Mechanical Equipment Ø Temperature Equipment Ø RF/Optical Equipment Calibration Process Implement the applicable requirements, customer requirements, QM and CSD. Capable in developing formal plans for facilities and equipment, personnel training and certification, measurement standards and traceability. Ability to recognize and address non-conformances and file Corrective Action Reports. Provide administration in all areas of service to facilitate both quality and quick turnaround. Capable in conducting workshops and classes for personnel / technician training. Conducts pre-evaluation and inspections to all customer equipment such as visual checking, cleaning, functional and self-testing. Ensures that maintenance, minor repair and calibration of equipment are carried out and completed based on the set schedule in accordance with customer specifications and requirements. Communicates the status and proper calibration updates to the concerned personnel or group on a timely manner; regularly collaborates with other technicians, CSRs, Sales and Purchasing. Analyzes data, uncertainty computation, uploading of data and report generation. Ensure that all calibration data is accurate and sufficient to take into account for complete reproducibility. Ensures compliance to quality standard based on existing and approved quality procedures. Ensure that environmental conditions are adequate for the work performed. Ensure that the sensitivity of the environmental conditions and accuracy of the records in the values shown are relevant in the calibration certificates. Ensure that the version used of the calibration procedure is the most recent and suitable for the instrument under test. Transport the instruments (customer and MPC), including reference standards, reference materials, software and hardware, so that it does not adversely affect the accuracy of the instrument does not degrade the net value of the instrument. Notify the Quality Assurance Manager, the customer, Division Manager and Sales Manager when an instrument is lost, damaged at any point of the service, or stolen having it under the protection of MPC. Ensure that the nomenclature and identification of the instruments is accurate and complete in CMS assuring it match with instrument identification. Ensure that calibration certificates contain accurate information and that all information required by the customer is documented in the report. Verify reported results, used calibration procedures, approved functions, reference standards used and identification of traceable patterns for accuracy and reproducibility. Ensure the safe handling, use and transport of customer and MPC equipment at all times during field service work. Seek supervision and / or assistance from the client to operate and / or calibrate the client's equipment which is installed, assembled and / or configured in the operation line. Study the equipment configuration, the operation process and the safety features of the unit before calibration, as long as it is part of an assembly of the machine or a production line. Protects and completes the necessary documentation related to field work, including the documentation in the worksheets, field service order form, abuse, misuse and / or mishandling of instruments and equipment, as well as laptops and computers. Ensure that the calibration data is accurate and sufficient to allow a complete reproducibility. Participate or support during accreditation or customer assessment as required. Perform the activities of qualified technician in calibration and / or repair according to the list of authorized technical capacity. Technician has the responsibility to stop work operation any time non-conformity is identify; Reports non-conformity to immediate superior, Lab Manager, Sales & CSR that was identified during the pre-evaluation and inspection process. Other Lab Manager has the authority and resources needed to carry out their duties, including: Implementation, maintenance and improvement of the management system; Identification of deviations from the management system or from the procedures for performing laboratory activities; Initiation of actions to prevent or minimize such deviations; Reporting to laboratory management on the performance of the management system and any need for improvement; Ensuring the effectiveness of laboratory activities. Ability to write procedures, train personnel, capable in managing company instrumentation, good housekeeping skills, capable in computer database management for company instruments. Responsible for the control of standards maintenance and intermediate checks of company equipment. Travels regionally or out of the country to perform field calibration work. Assists in the planning and scheduling of calibration workload when input is deemed necessary. Coordinates and responds promptly to customer inquiries and provides technical support and advice as required; coordination should be supported with factual information. Maintains accurate records of all activities and prepares technical reports with recommendation as applicable. Works with the Department in setting general goals and develops, supports and implements plans to hit identified targets; recommends improvement to support current operation and related processes Observes safety precautions and quality standard in the performance of task and complies with the company directives and policies; observes proper communication practices and manages confidentiality of information within and outside the group If the Lab Manager does not meet Tech 3 Dimensional and Electrical requirements, then there must be another technician at a Tech 3 Dimensional level that can report to the Lab Manager. Requirements: The professional qualifications required and the experience necessary to effectively complete the responsibilities of this position. Education: - Educational attainment gained from Technical or other related courses, preferably in Metrology, Instrumentation, Electronics or its equivalent. Training: - Complete the QMS exams 101, 102, 103, 104, 105, 201 and 401 with 70% minimum score. - ESDC Teamsite Module, to be completed within 3 days of commencing employment. - System / Software development system / Software modification. - Qualification and Certification. - -Basic Trouble Shooting and Repair Techniques. Work Experience: - Minimum 7 years of metrology experience and/or years of audit/ quality experience. - Meets all requirements of either an Electronic or Dimensional Supervisor. Knowledge, Skills and Ability: Demonstrates good verbal communication, good written skills Knowledgeable in calibration procedures, computation of uncertainty and computer applications. Must have keen eye for quality and details, basic problem solving techniques. Familiar with techniques and tools associated with ISO/IEC 17025. Team player, Trustworthy, Service oriented and can manage priorities. Ability to drive four-wheel vehicle (w/ valid driver's license) is an advantage. PI4a619f44454b-0875
Hi-Tek Manufacturing is searching for experienced Industrial Maintenance Technician who wish to develop his or her career in advanced manufacturing technology by executing a higher level of workmanship. Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! Hi-Tek offers a clean, climate-controlled environment and we believe in quality and safety above all else. 1st shift 7:00am-3:30pm Mon-Fri OT may be required as needed 2nd shift 3:30pm-12:00am OT may be required as needed Hi-Tek is a Drug-Free Workplace and conducts pre-employment drug and background screening and random drug screening. Essential Tasks Perform general electrical and mechanical maintenance of machinery and equipment Troubleshoot, diagnose, and repair hydraulic and pneumatic production equipment Troubleshoot electrical and mechanical issues using appropriate testing devices Install, maintain, and repair electrical control, wiring, and lighting systems Ability to weld as needed (ARC, MIG or TIG) Electrical wiring capabilities to manage problems with the building's electricity. Working on damaged electrical wiring or installing new Perform mechanical skills including but not limited to mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of machinery Working from schematics, drawings, layouts, or other specifications to locate and diagnose problems Operate various platform lifts, including but not limited to fork-lifts, aerial lifts, and scissor lifts Operate overhead crane when necessary Use a variety of hand/power tools and material handling equipment in performing duties Fix potential safety hazards to avoid injuries Follow lock out tag out protocol as required Assists other maintenance staff with necessary maintenance and repairs as required. Responds to daily facilities work orders and works on special projects Diligence to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlooked Effective communication and people skills Performing cleaning activities as needed Follows all safety-related policies, rules, regulations, technical instructions, and guidelines Operate with situational awareness and identify unsafe behaviors and conditions and communicate concerns to management Maintains a safe and clean work environment by performing daily housekeeping duties and keeps work area free from hazards Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment Ability to operate autonomously and self-direct Good and reliable attendance and a team-player attitude are necessary Follow all Hi-Tek policies and procedures, including the use of proper PPE Education and Experience High school diploma or GED requiredCompletion of maintenance certificate program from either a two-year college or technical school or equivalenKnowledge of CNC machines, distributed control systems, and logic controllers requiredUnderstanding of electrical, mechanical, fluid power and control systemAbility to work with low voltage systems Experience with E & I (Electrical & Instrumentation) work preferredTroubleshooting / critical thinking skillsMust meet the ITAR definition of 120.15 U.S. person Key Competencies The ability to work efficiently with others or independently as required Integrity and conscientiousness in all work-related matters Safety conscious always Reliable attendance within acceptable standards of attendance policy Complex problem solving with critical math skills Must be able to follow verbal and written instructions in EnglishMust be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels Lift, push, pull and/or carry up to thirty-five pounds regularly Standing or walking at least 95% of scheduled shift Routinely perform reaching overhead / at or below shoulder level, twisting, bending, crouching, kneeling, and grasping to move and set tools, equipment, and materials Ability to perform fine and gross manipulation Ability to operate foot or leg controls Must be able to climb stairs, ladders, or scaffolding Near, Far, or Peripheral visual Acuity naturally or with corrective lenses Ability to speak to express or exchange ideas or discuss work instructions Ability to hear, understand and distinguish speech and/or other sounds e.g., machinery alarms, equipment troubleshooting, management instruction, operator feedback on issue needing maintenance or repair Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with the ability to pass annual vision test as required Perform under AS9100 standards Compensation details: 25-40 Hourly Wage PIa39c66f7f5-
01/08/2026
Full time
Hi-Tek Manufacturing is searching for experienced Industrial Maintenance Technician who wish to develop his or her career in advanced manufacturing technology by executing a higher level of workmanship. Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! Hi-Tek offers a clean, climate-controlled environment and we believe in quality and safety above all else. 1st shift 7:00am-3:30pm Mon-Fri OT may be required as needed 2nd shift 3:30pm-12:00am OT may be required as needed Hi-Tek is a Drug-Free Workplace and conducts pre-employment drug and background screening and random drug screening. Essential Tasks Perform general electrical and mechanical maintenance of machinery and equipment Troubleshoot, diagnose, and repair hydraulic and pneumatic production equipment Troubleshoot electrical and mechanical issues using appropriate testing devices Install, maintain, and repair electrical control, wiring, and lighting systems Ability to weld as needed (ARC, MIG or TIG) Electrical wiring capabilities to manage problems with the building's electricity. Working on damaged electrical wiring or installing new Perform mechanical skills including but not limited to mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of machinery Working from schematics, drawings, layouts, or other specifications to locate and diagnose problems Operate various platform lifts, including but not limited to fork-lifts, aerial lifts, and scissor lifts Operate overhead crane when necessary Use a variety of hand/power tools and material handling equipment in performing duties Fix potential safety hazards to avoid injuries Follow lock out tag out protocol as required Assists other maintenance staff with necessary maintenance and repairs as required. Responds to daily facilities work orders and works on special projects Diligence to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlooked Effective communication and people skills Performing cleaning activities as needed Follows all safety-related policies, rules, regulations, technical instructions, and guidelines Operate with situational awareness and identify unsafe behaviors and conditions and communicate concerns to management Maintains a safe and clean work environment by performing daily housekeeping duties and keeps work area free from hazards Accomplishes organization goals by accepting ownership for accomplishing new and different requests, exploring opportunities to add value to job accomplishment Ability to operate autonomously and self-direct Good and reliable attendance and a team-player attitude are necessary Follow all Hi-Tek policies and procedures, including the use of proper PPE Education and Experience High school diploma or GED requiredCompletion of maintenance certificate program from either a two-year college or technical school or equivalenKnowledge of CNC machines, distributed control systems, and logic controllers requiredUnderstanding of electrical, mechanical, fluid power and control systemAbility to work with low voltage systems Experience with E & I (Electrical & Instrumentation) work preferredTroubleshooting / critical thinking skillsMust meet the ITAR definition of 120.15 U.S. person Key Competencies The ability to work efficiently with others or independently as required Integrity and conscientiousness in all work-related matters Safety conscious always Reliable attendance within acceptable standards of attendance policy Complex problem solving with critical math skills Must be able to follow verbal and written instructions in EnglishMust be able to clearly communicate information to others verbally and in writing in English Physical Demand Levels Lift, push, pull and/or carry up to thirty-five pounds regularly Standing or walking at least 95% of scheduled shift Routinely perform reaching overhead / at or below shoulder level, twisting, bending, crouching, kneeling, and grasping to move and set tools, equipment, and materials Ability to perform fine and gross manipulation Ability to operate foot or leg controls Must be able to climb stairs, ladders, or scaffolding Near, Far, or Peripheral visual Acuity naturally or with corrective lenses Ability to speak to express or exchange ideas or discuss work instructions Ability to hear, understand and distinguish speech and/or other sounds e.g., machinery alarms, equipment troubleshooting, management instruction, operator feedback on issue needing maintenance or repair Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with the ability to pass annual vision test as required Perform under AS9100 standards Compensation details: 25-40 Hourly Wage PIa39c66f7f5-
A very reputable client of ours has openings on their Systems Verification Test Team . This group is responsible for documenting and performing verification tests for hearing aids, accessories, manufacturing software, fitting software, mobile applications, programmers, their components and sub-systems. This role is also responsible for assisting in problem solving and issue resolution. This position is primarily responsible for verifying new products; however, may also be responsible for supporting continuation engineering and technology development, as needed. Job Title: Systems Verification Technician Location: Eden Prairie, MN Pay Rate: $28.85hr Education: AAS Degree in Electronics is preferred, but will consider without Experience: Any experience in electronic design, test and manufacturing is great to have Any experience in a regulated environment (medical or military) is nice to have Intermediate to advanced knowledge of microelectronic circuits and components required Intermediate to advanced knowledge of common business software required (i.e. Microsoft Office suite) Intermediate to advanced knowledge of product development processes for microelectronic circuits required Intermediate to advanced knowledge of bench top test instrumentation control and use Intermediate to advanced knowledge of verification methodologies Intermediate to advanced knowledge of software development methodologies Intermediate to advanced knowledge of ANSI, IEC, and homologation standards desirable About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands - Manpower, Experis, Talent Solutions, and Jefferson Wells - creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.
01/08/2026
Seasonal
A very reputable client of ours has openings on their Systems Verification Test Team . This group is responsible for documenting and performing verification tests for hearing aids, accessories, manufacturing software, fitting software, mobile applications, programmers, their components and sub-systems. This role is also responsible for assisting in problem solving and issue resolution. This position is primarily responsible for verifying new products; however, may also be responsible for supporting continuation engineering and technology development, as needed. Job Title: Systems Verification Technician Location: Eden Prairie, MN Pay Rate: $28.85hr Education: AAS Degree in Electronics is preferred, but will consider without Experience: Any experience in electronic design, test and manufacturing is great to have Any experience in a regulated environment (medical or military) is nice to have Intermediate to advanced knowledge of microelectronic circuits and components required Intermediate to advanced knowledge of common business software required (i.e. Microsoft Office suite) Intermediate to advanced knowledge of product development processes for microelectronic circuits required Intermediate to advanced knowledge of bench top test instrumentation control and use Intermediate to advanced knowledge of verification methodologies Intermediate to advanced knowledge of software development methodologies Intermediate to advanced knowledge of ANSI, IEC, and homologation standards desirable About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands - Manpower, Experis, Talent Solutions, and Jefferson Wells - creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.
Description CHRISTUS Santa Rosa Hospital - Westover Hills(CSRH-WH) is a 150-bed hospital serving the fastest growing area of San Antonio. Specialized care includes orthopedic and surgical services, ICU, women's services, a newborn nursery, comprehensive cardiovascular care from diagnostics to open heart surgery, vascular lab, sleep center, emergency services, the CHRISTUS Weight Loss Institute, wound care, rehabilitation, and more. The campus also boasts an Outpatient Imaging Center and three medical plazas, one of which houses our CHRISTUS Santa Rosa Family Medicine Residency Program and CHRISTUS Santa Rosa Family Health Center. Summary: This Job meets the minimum CLIA qualifications of a Laboratory General Supervisor, and under the direction of the Laboratory Director and/or Laboratory Manager, coordinates and manages the day-to-day operations of their specific section(s) and shift(s). The Laboratory Supervisor serves in an administrative role with direct reports, and functions in an exempt pay status. In conjunction with the Laboratory Director and/or Laboratory Manager, this Job develops and implements new procedures, instrumentation, quality control, and reagent use. This Job is also responsible for the development and maintenance of policies and procedures that meet the standards of regulatory agencies and implement service quality improvements. The Laboratory Supervisor ensures all personnel are held accountable through ongoing personnel performance reviews and assists in the orientation and development of personnel competencies for their section(s). Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Is responsible for providing day-to-day supervision of high, moderate, and waived complexity test performance by laboratory testing personnel. Must be accessible to address technical problems via on-site, telephone, or electronic consultation with testing personnel at any time that testing is performed in accordance with policies and procedures established by the laboratory Medical Director. Ensures compliance with all policies, procedures, and standards as promulgated by state and federal agencies, the hospital, and other regulatory entities such as CLIA, TJC, CAP, AABB, etc. Plans, organizes and coordinates the work activities of assigned section(s) and shift(s). Keeps accurate attendance records on all associates; maintains time and attendance records for the department. Assists the Director/Manager in maintaining the Laboratory budget to include monthly analysis and variance reporting on expense detail. Assists the Director/Manager in associate performance conversations that drive merit increases. Develops, implements, and maintains current procedural manuals of all tests performed in the section(s) assigned and updates and reviews manuals biennially or more often as necessary. Enforces all safety policies and procedures. Researches, evaluates and implements new and improved procedures, methodologies, instrumentation, and techniques as assigned by the Director/Manager, or Supervisor. Implements an appropriate section and/or shift-specific Quality Control Program and maintains all applicable Quality Control and Functional Verification records. Is responsible for monitoring test analyses and specimen examinations to ensure that acceptable levels of analytic performance are maintained. Reviews the work done by technologists/technicians working in the section(s) or shift(s) assigned to ensure a minimum of errors and corrective action in the interest of good patient care. Refers clinical problems to the laboratory director, manager, or supervisor as appropriate. Assures that all remedial actions are taken whenever test systems deviate from the laboratory's established performance specifications. Ensures that patient test results are not reported until all corrective actions have been taken and the test system is properly functioning. Operates, maintains, and troubleshoots all equipment in assigned section(s) to keep in good working order; makes minor repairs and adjustments when necessary; initiates and follows through with Biomedical Engineering/equipment manufacturer for safety checks and repairs; schedules preventive maintenance within the section with Biomedical Engineering, equipment manufacturer, or an outside contractor. Prepares and submits routine or special administrative and technical reports by due dates as required, requested, or delegated. Orders and maintains inventories for all necessary supplies and reagents in assigned section(s) to always have an adequate amount on hand. Trains new technologists and technicians in the assigned section(s) procedures and policies and provides subsequent training in all new or revised procedures and techniques for assigned shift(s) or provides remedial training as necessary. Responsible for maintaining orientation records on new associates. Assists the Director/Manager in designing, implementing, collecting, and analyzing data, and reporting all phases of a comprehensive performance improvement program that involves laboratory personnel in Performance Improvement activities. Prepares and conducts in-service education either formally or informally for assigned section(s) and shift(s). Provides input on personnel for hire, fire, transfer, interview, disciplinary probation, etc; counsels and documents technical deficiencies. Performs skills review and competency assessments and maintains appropriate documentation on all technical personnel as delegated by the Laboratory Manager/Director. Oversees and enforces expectations of personnel in assigned section(s). Participates in proficiency testing surveys; reviews and evaluates results and maintains copies of survey records in section(s). Coordinates and attends meetings as required to discuss changes and developments regarding policies, equipment, procedures, staffing, etc. Utilizes and has a thorough working knowledge of the Laboratory Information System and applications thereof. Demonstrates competence to perform assigned patient care responsibilities in a manner that meets the population-specific and developmental needs of patients served by the department. Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, age-specific, and other developmental needs of each patient served. Processes patient specimens, including collection, handling, and distribution always cognizant of minimal pediatric specimen volumes (when required). Performs all routine and complicated laboratory procedures in the primary section which assigns age (Pedi) or sex-specific values. Provides notification and documentation of critical laboratory values obtained. Calculates, enters, and/or verifies results of laboratory procedures. Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary for the performance of assigned job duties. Keeps abreast of Medical Technology, by reading Journals, texts, and technical bulletins; attends workshops and seminars; becomes active in local professional associations. Demonstrates adherence to the CORE values of CHRISTUS Health. Performs other duties as assigned. Job Requirements: Education/Skills Bachelor's degree or equivalent education in chemical, physical, biological, clinical laboratory science, or medical technology from a regionally accredited college/university or equivalent years of experience required. Experience 5 years of experience as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or Medical Laboratory Technician required. 5 years of full-time primary experience in the specific section of responsibility required. Licenses, Registrations, or Certifications Active certification or certification eligibility for MT (ASCP), CLS (ASCP), MLS (ASCP), MT (AMT), CLS (NCA/ASCP), or MT (AAB) required. Work Schedule: 5 Days - 8 Hours Work Type: Full Time
01/08/2026
Full time
Description CHRISTUS Santa Rosa Hospital - Westover Hills(CSRH-WH) is a 150-bed hospital serving the fastest growing area of San Antonio. Specialized care includes orthopedic and surgical services, ICU, women's services, a newborn nursery, comprehensive cardiovascular care from diagnostics to open heart surgery, vascular lab, sleep center, emergency services, the CHRISTUS Weight Loss Institute, wound care, rehabilitation, and more. The campus also boasts an Outpatient Imaging Center and three medical plazas, one of which houses our CHRISTUS Santa Rosa Family Medicine Residency Program and CHRISTUS Santa Rosa Family Health Center. Summary: This Job meets the minimum CLIA qualifications of a Laboratory General Supervisor, and under the direction of the Laboratory Director and/or Laboratory Manager, coordinates and manages the day-to-day operations of their specific section(s) and shift(s). The Laboratory Supervisor serves in an administrative role with direct reports, and functions in an exempt pay status. In conjunction with the Laboratory Director and/or Laboratory Manager, this Job develops and implements new procedures, instrumentation, quality control, and reagent use. This Job is also responsible for the development and maintenance of policies and procedures that meet the standards of regulatory agencies and implement service quality improvements. The Laboratory Supervisor ensures all personnel are held accountable through ongoing personnel performance reviews and assists in the orientation and development of personnel competencies for their section(s). Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Is responsible for providing day-to-day supervision of high, moderate, and waived complexity test performance by laboratory testing personnel. Must be accessible to address technical problems via on-site, telephone, or electronic consultation with testing personnel at any time that testing is performed in accordance with policies and procedures established by the laboratory Medical Director. Ensures compliance with all policies, procedures, and standards as promulgated by state and federal agencies, the hospital, and other regulatory entities such as CLIA, TJC, CAP, AABB, etc. Plans, organizes and coordinates the work activities of assigned section(s) and shift(s). Keeps accurate attendance records on all associates; maintains time and attendance records for the department. Assists the Director/Manager in maintaining the Laboratory budget to include monthly analysis and variance reporting on expense detail. Assists the Director/Manager in associate performance conversations that drive merit increases. Develops, implements, and maintains current procedural manuals of all tests performed in the section(s) assigned and updates and reviews manuals biennially or more often as necessary. Enforces all safety policies and procedures. Researches, evaluates and implements new and improved procedures, methodologies, instrumentation, and techniques as assigned by the Director/Manager, or Supervisor. Implements an appropriate section and/or shift-specific Quality Control Program and maintains all applicable Quality Control and Functional Verification records. Is responsible for monitoring test analyses and specimen examinations to ensure that acceptable levels of analytic performance are maintained. Reviews the work done by technologists/technicians working in the section(s) or shift(s) assigned to ensure a minimum of errors and corrective action in the interest of good patient care. Refers clinical problems to the laboratory director, manager, or supervisor as appropriate. Assures that all remedial actions are taken whenever test systems deviate from the laboratory's established performance specifications. Ensures that patient test results are not reported until all corrective actions have been taken and the test system is properly functioning. Operates, maintains, and troubleshoots all equipment in assigned section(s) to keep in good working order; makes minor repairs and adjustments when necessary; initiates and follows through with Biomedical Engineering/equipment manufacturer for safety checks and repairs; schedules preventive maintenance within the section with Biomedical Engineering, equipment manufacturer, or an outside contractor. Prepares and submits routine or special administrative and technical reports by due dates as required, requested, or delegated. Orders and maintains inventories for all necessary supplies and reagents in assigned section(s) to always have an adequate amount on hand. Trains new technologists and technicians in the assigned section(s) procedures and policies and provides subsequent training in all new or revised procedures and techniques for assigned shift(s) or provides remedial training as necessary. Responsible for maintaining orientation records on new associates. Assists the Director/Manager in designing, implementing, collecting, and analyzing data, and reporting all phases of a comprehensive performance improvement program that involves laboratory personnel in Performance Improvement activities. Prepares and conducts in-service education either formally or informally for assigned section(s) and shift(s). Provides input on personnel for hire, fire, transfer, interview, disciplinary probation, etc; counsels and documents technical deficiencies. Performs skills review and competency assessments and maintains appropriate documentation on all technical personnel as delegated by the Laboratory Manager/Director. Oversees and enforces expectations of personnel in assigned section(s). Participates in proficiency testing surveys; reviews and evaluates results and maintains copies of survey records in section(s). Coordinates and attends meetings as required to discuss changes and developments regarding policies, equipment, procedures, staffing, etc. Utilizes and has a thorough working knowledge of the Laboratory Information System and applications thereof. Demonstrates competence to perform assigned patient care responsibilities in a manner that meets the population-specific and developmental needs of patients served by the department. Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, age-specific, and other developmental needs of each patient served. Processes patient specimens, including collection, handling, and distribution always cognizant of minimal pediatric specimen volumes (when required). Performs all routine and complicated laboratory procedures in the primary section which assigns age (Pedi) or sex-specific values. Provides notification and documentation of critical laboratory values obtained. Calculates, enters, and/or verifies results of laboratory procedures. Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary for the performance of assigned job duties. Keeps abreast of Medical Technology, by reading Journals, texts, and technical bulletins; attends workshops and seminars; becomes active in local professional associations. Demonstrates adherence to the CORE values of CHRISTUS Health. Performs other duties as assigned. Job Requirements: Education/Skills Bachelor's degree or equivalent education in chemical, physical, biological, clinical laboratory science, or medical technology from a regionally accredited college/university or equivalent years of experience required. Experience 5 years of experience as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or Medical Laboratory Technician required. 5 years of full-time primary experience in the specific section of responsibility required. Licenses, Registrations, or Certifications Active certification or certification eligibility for MT (ASCP), CLS (ASCP), MLS (ASCP), MT (AMT), CLS (NCA/ASCP), or MT (AAB) required. Work Schedule: 5 Days - 8 Hours Work Type: Full Time
Overview ENGINEERING TECHNICIAN (F-24412): Bowhead seeks a Engineering Technician to join our team in supporting the Naval Surface Warfare Center (NSWC) Crane Division. The Engineering Technician indepedntly plans and accomplishes complete projects or studies of a broad scope of complexity and serves as an expert in a narrow aspect of a particular field of engineering. Responsibilities Essential functions will include: Prepares designs and specifications for various complex equipment or systems (e.g., heating system in an office building or new electronic componets such as solid state devices for instrumentation equipment). Plans approach to solve design problems; conceives and recommends new design techniques. Resolves design problems with contract personnel and assures compatibility of design with other parts of the system. Designs and coordinates test set-ups and experiments to prove or disprove the feasibility of preliminary design. Uses untried and untested measurement techniques and improves the performance of the equipment. May advise equipment users on redesign to solve unique operational deficiencies. Plans approach and conducts various experiments to develop equipment or systems characterized by difficult performance requirements because of conflicting attributes such as versatility, size, and ease of operation. Arranges for fabrication of pilot models and determines test procedures and design of special test equipment. Other duties as assigned. Qualifications Bachelor's degree in electronics with a minimum of ten (10) to ten (15) fifteen years of relevant experience is required at a minimum Intermediate to advanced level skills in Microsoft Office software suite - Word, Excel, Outlook, PowerPoint Ability to communicate effectively with all levels of employees and outside contacts Strong interpersonal skills and good judgment with the ability to work alone or as part of a team Prior experience at NSWC Crane highly preferred Physical Demands: Must be able to lift up to 25 pounds Must be able to stand and walk for prolonged amounts of time Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIREMENTS: Must be able to obtain a clearance at a Secret level, however candidates with an active Secret level clearance are highly encouraged to apply. US Citizenship is a requirement for Secret clearance at this location.
01/08/2026
Full time
Overview ENGINEERING TECHNICIAN (F-24412): Bowhead seeks a Engineering Technician to join our team in supporting the Naval Surface Warfare Center (NSWC) Crane Division. The Engineering Technician indepedntly plans and accomplishes complete projects or studies of a broad scope of complexity and serves as an expert in a narrow aspect of a particular field of engineering. Responsibilities Essential functions will include: Prepares designs and specifications for various complex equipment or systems (e.g., heating system in an office building or new electronic componets such as solid state devices for instrumentation equipment). Plans approach to solve design problems; conceives and recommends new design techniques. Resolves design problems with contract personnel and assures compatibility of design with other parts of the system. Designs and coordinates test set-ups and experiments to prove or disprove the feasibility of preliminary design. Uses untried and untested measurement techniques and improves the performance of the equipment. May advise equipment users on redesign to solve unique operational deficiencies. Plans approach and conducts various experiments to develop equipment or systems characterized by difficult performance requirements because of conflicting attributes such as versatility, size, and ease of operation. Arranges for fabrication of pilot models and determines test procedures and design of special test equipment. Other duties as assigned. Qualifications Bachelor's degree in electronics with a minimum of ten (10) to ten (15) fifteen years of relevant experience is required at a minimum Intermediate to advanced level skills in Microsoft Office software suite - Word, Excel, Outlook, PowerPoint Ability to communicate effectively with all levels of employees and outside contacts Strong interpersonal skills and good judgment with the ability to work alone or as part of a team Prior experience at NSWC Crane highly preferred Physical Demands: Must be able to lift up to 25 pounds Must be able to stand and walk for prolonged amounts of time Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIREMENTS: Must be able to obtain a clearance at a Secret level, however candidates with an active Secret level clearance are highly encouraged to apply. US Citizenship is a requirement for Secret clearance at this location.
Automation Engineer Automation Engineer - Controls Engineering Expertise Needed Location: Roanoke, VA Work Location: On-Site Department: Engineering Reports To: Project Manager FLSA Status: Salary Exempt Who We Are Dorsett Controls is a leading provider of innovative automation solutions, specializing in custom control systems and services across a diverse range of industries, including HVAC controls and water/wastewater SCADA systems. With a commitment to precision, reliability, and cutting-edge technology, we help organizations optimize operations and enhance efficiency. At Dorsett Controls, we are dedicated to delighting our customers, creating innovative experiences, and pursuing excellence. Our team is focused on delivering outstanding results, and we are seeking motivated individuals to join us in shaping the future of the control systems industry. What We Need We are currently seeking an experienced Automation Engineer to join our team in the Roanoke VA area. This role is ideal for a skilled professional with a strong background in controls engineering who is passionate about solving complex problems and driving results. Because automation is at the heart of what we do, as an Automation Engineer, you will play a key role in designing, developing, and supporting automation solutions that directly impact system performance, reliability, and scalability for our customers. Your work will not only contribute to project success it will shape the way our clients experience automation and control. What You'll Do Design, program, and troubleshoot PLC and SCADA-based control systems for industrial and municipal applications. Develop and implement HMI/SCADA interfaces using platforms such as Ignition, Wonderware, or VTScada. Collaborate with project managers, panel builders, and field technicians to deliver seamless integration and project execution. Perform on-site commissioning, testing, and startup of control systems. Analyze and improve existing systems for better performance, efficiency, and safety. Provide technical support and documentation to clients and internal stakeholders. Participate in project planning, estimation, and specification development. Ensure all work complies with industry standards, company guidelines, and safety regulations. What You Bring Bachelor's degree in electrical engineering, automation technology, or a related field (or equivalent experience). Minimum of 5 years of hands-on experience in controls or automation engineering. Proficient in programming PLCs (Allen-Bradley, Siemens, Schneider, etc.) and developing SCADA/HMI systems. Strong knowledge of industrial communication protocols (Ethernet/IP, Modbus, etc.). Experience with process control systems, instrumentation, and field integration. Strong troubleshooting and analytical skills, with the ability to work independently and collaboratively. Willingness to travel locally and regionally for on-site support and system startups. Valid driver's license required. What Sets You Apart Experience working in water/wastewater, manufacturing, or energy sectors. Familiarity with UL 508A panel design and control panel fabrication. Ability to manage multiple projects and deadlines in a fast-paced environment. Commitment to continuous learning and keeping current with emerging technologies. What We Offer Benefits: Medical, dental, vision, life insurance, EAP, FSA, HSA, LTD/STD insurance and wellness benefits. Career development: Opportunities for advancement and education reimbursement. Flexible work schedule: We offer on-site, remote and hybrid options, based on role and organizational needs. Travel Requirements Willingness to travel up to 40% including overnight stays, to support project execution, site visits, and team collaboration across multiple locations. Why Dorsett Controls? At Dorsett Controls, we combine technical excellence with a people-first approach. You'll be part of a team that values innovation, integrity, and growth. We invest in our people and empower them to lead, learn, and contribute meaningfully to impactful projects across the region. We offer competitive compensation, comprehensive benefits, and opportunities to advance within a company that values your expertise and vision. Apply now and be part of an organization where your skills build the future of automation. Dorsett Controls is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Compensation details: 00 PI6afc510ff5-
01/07/2026
Full time
Automation Engineer Automation Engineer - Controls Engineering Expertise Needed Location: Roanoke, VA Work Location: On-Site Department: Engineering Reports To: Project Manager FLSA Status: Salary Exempt Who We Are Dorsett Controls is a leading provider of innovative automation solutions, specializing in custom control systems and services across a diverse range of industries, including HVAC controls and water/wastewater SCADA systems. With a commitment to precision, reliability, and cutting-edge technology, we help organizations optimize operations and enhance efficiency. At Dorsett Controls, we are dedicated to delighting our customers, creating innovative experiences, and pursuing excellence. Our team is focused on delivering outstanding results, and we are seeking motivated individuals to join us in shaping the future of the control systems industry. What We Need We are currently seeking an experienced Automation Engineer to join our team in the Roanoke VA area. This role is ideal for a skilled professional with a strong background in controls engineering who is passionate about solving complex problems and driving results. Because automation is at the heart of what we do, as an Automation Engineer, you will play a key role in designing, developing, and supporting automation solutions that directly impact system performance, reliability, and scalability for our customers. Your work will not only contribute to project success it will shape the way our clients experience automation and control. What You'll Do Design, program, and troubleshoot PLC and SCADA-based control systems for industrial and municipal applications. Develop and implement HMI/SCADA interfaces using platforms such as Ignition, Wonderware, or VTScada. Collaborate with project managers, panel builders, and field technicians to deliver seamless integration and project execution. Perform on-site commissioning, testing, and startup of control systems. Analyze and improve existing systems for better performance, efficiency, and safety. Provide technical support and documentation to clients and internal stakeholders. Participate in project planning, estimation, and specification development. Ensure all work complies with industry standards, company guidelines, and safety regulations. What You Bring Bachelor's degree in electrical engineering, automation technology, or a related field (or equivalent experience). Minimum of 5 years of hands-on experience in controls or automation engineering. Proficient in programming PLCs (Allen-Bradley, Siemens, Schneider, etc.) and developing SCADA/HMI systems. Strong knowledge of industrial communication protocols (Ethernet/IP, Modbus, etc.). Experience with process control systems, instrumentation, and field integration. Strong troubleshooting and analytical skills, with the ability to work independently and collaboratively. Willingness to travel locally and regionally for on-site support and system startups. Valid driver's license required. What Sets You Apart Experience working in water/wastewater, manufacturing, or energy sectors. Familiarity with UL 508A panel design and control panel fabrication. Ability to manage multiple projects and deadlines in a fast-paced environment. Commitment to continuous learning and keeping current with emerging technologies. What We Offer Benefits: Medical, dental, vision, life insurance, EAP, FSA, HSA, LTD/STD insurance and wellness benefits. Career development: Opportunities for advancement and education reimbursement. Flexible work schedule: We offer on-site, remote and hybrid options, based on role and organizational needs. Travel Requirements Willingness to travel up to 40% including overnight stays, to support project execution, site visits, and team collaboration across multiple locations. Why Dorsett Controls? At Dorsett Controls, we combine technical excellence with a people-first approach. You'll be part of a team that values innovation, integrity, and growth. We invest in our people and empower them to lead, learn, and contribute meaningfully to impactful projects across the region. We offer competitive compensation, comprehensive benefits, and opportunities to advance within a company that values your expertise and vision. Apply now and be part of an organization where your skills build the future of automation. Dorsett Controls is proud to be an Equal Employment Opportunity and affirmative action employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Compensation details: 00 PI6afc510ff5-
Automation Technician I Who we are: Dorsett Controls is a leading provider of innovative automation solutions, specializing in custom control systems and services across a diverse range of industries, including HVAC controls and water/wastewater SCADA systems. With a commitment to precision, reliability, and cutting-edge technology, we help organizations optimize operations and enhance efficiency. At Dorsett Controls, we are dedicated to delighting our customers, creating innovative experiences, and pursuing excellence. Our team is focused on delivering outstanding results, and we are seeking motivated individuals to join us in shaping the future of the control systems industry. What we need: We are looking to add an Automation Technician I to our team in Layton, UT. They will install, repair, and maintain computer-based control systems that monitor and control any number of electrical and mechanical systems ranging from a building's mechanical and electrical equipment including heating, ventilation, and air conditioning (HVAC), and energy management systems to process controls, water distribution equipment and wastewater collection systems. They will apply their knowledge of various trades, such as electrical, mechanical, industrial, telecommunications and information systems networks, to computer-based control systems, building automation, environmental control, energy systems, and SCADA utilized in in commercial and industrial buildings and facilities. They interface with customers, architects, engineers, and contractors to install and service automation systems, including project startup and commissioning, in office buildings and industrial facilities. Duties and Responsibilities: Creating control programming for projects based on design, sequence of operation, and project requirements Loading and configuring software for field and network level controllers Conducting commissioning and system diagnostics for all levels of system controllers and end devices, such as sensors and actuators Completing necessary commissioning documentation and keeping management, contractor or customer informed of job progress and any issues encountered Regularly work with mechanical, electrical, and low voltage controls components and instrumentation Calibrate system devices using basic electronic test and calibration equipment Managing administrative tasks, including time sheets, expense reports, and on-site documentation Documenting changes and providing information for as-built documentation Handles emergency service calls as directed during the workday and after hours if on-call Responds to customer service calls (on-site or on-line); checks indicated points of trouble; analyzes full requirements of system; checks and tests system components Diagnoses trouble or defect; determines corrective action and repairs system Performs preventative maintenance and diagnostics on automation system and components according to contract scope of work and service agreements as applicable Tests and verify system readings ensuring an optimal system operation Generates drawings and schematics for the project by using computer aided design (CAD) software Generates graphics and populates database required for the project Programs controls using a wide variety of third-party and proprietary software Develops or modifies electronic devices, circuits, or systems according to specifications Reads electrical drawings and electrical schematics Sets up and tests communications devices for the systems (i.e., cell modems, wireless radios, fiber, or internet connection) Works with sub-contractors to install system components Performs onsite start-up and check-out of the control systems Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education, Skills, Knowledge, and Experience Associate degree or equivalent from a two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience Minimum of 3 years' experience in controls and automation, including troubleshooting, diagnosis, and repair of process control and/or digital control systems. Minimum of two year's experience with PLCs (AB/Rockwell Automation preferred) Experience with Ignition or VTSCADA HMI software is a plus BACnet, TCP/IP, SQL and Modbus protocols experience. Excellent verbal and written communication and customer relationship skills; team player Must possess a valid driver's license with satisfactory driving record Must pass a background screening for work on a federal installation Time management; organizational skills Adaptability; dependability; flexibility; integrity Certificates, Licenses, Registrations Current Driver's License. Electrical License preferred. Compensation details: 29-36 PIe9a76bc615bb-7609
01/07/2026
Full time
Automation Technician I Who we are: Dorsett Controls is a leading provider of innovative automation solutions, specializing in custom control systems and services across a diverse range of industries, including HVAC controls and water/wastewater SCADA systems. With a commitment to precision, reliability, and cutting-edge technology, we help organizations optimize operations and enhance efficiency. At Dorsett Controls, we are dedicated to delighting our customers, creating innovative experiences, and pursuing excellence. Our team is focused on delivering outstanding results, and we are seeking motivated individuals to join us in shaping the future of the control systems industry. What we need: We are looking to add an Automation Technician I to our team in Layton, UT. They will install, repair, and maintain computer-based control systems that monitor and control any number of electrical and mechanical systems ranging from a building's mechanical and electrical equipment including heating, ventilation, and air conditioning (HVAC), and energy management systems to process controls, water distribution equipment and wastewater collection systems. They will apply their knowledge of various trades, such as electrical, mechanical, industrial, telecommunications and information systems networks, to computer-based control systems, building automation, environmental control, energy systems, and SCADA utilized in in commercial and industrial buildings and facilities. They interface with customers, architects, engineers, and contractors to install and service automation systems, including project startup and commissioning, in office buildings and industrial facilities. Duties and Responsibilities: Creating control programming for projects based on design, sequence of operation, and project requirements Loading and configuring software for field and network level controllers Conducting commissioning and system diagnostics for all levels of system controllers and end devices, such as sensors and actuators Completing necessary commissioning documentation and keeping management, contractor or customer informed of job progress and any issues encountered Regularly work with mechanical, electrical, and low voltage controls components and instrumentation Calibrate system devices using basic electronic test and calibration equipment Managing administrative tasks, including time sheets, expense reports, and on-site documentation Documenting changes and providing information for as-built documentation Handles emergency service calls as directed during the workday and after hours if on-call Responds to customer service calls (on-site or on-line); checks indicated points of trouble; analyzes full requirements of system; checks and tests system components Diagnoses trouble or defect; determines corrective action and repairs system Performs preventative maintenance and diagnostics on automation system and components according to contract scope of work and service agreements as applicable Tests and verify system readings ensuring an optimal system operation Generates drawings and schematics for the project by using computer aided design (CAD) software Generates graphics and populates database required for the project Programs controls using a wide variety of third-party and proprietary software Develops or modifies electronic devices, circuits, or systems according to specifications Reads electrical drawings and electrical schematics Sets up and tests communications devices for the systems (i.e., cell modems, wireless radios, fiber, or internet connection) Works with sub-contractors to install system components Performs onsite start-up and check-out of the control systems Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education, Skills, Knowledge, and Experience Associate degree or equivalent from a two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience Minimum of 3 years' experience in controls and automation, including troubleshooting, diagnosis, and repair of process control and/or digital control systems. Minimum of two year's experience with PLCs (AB/Rockwell Automation preferred) Experience with Ignition or VTSCADA HMI software is a plus BACnet, TCP/IP, SQL and Modbus protocols experience. Excellent verbal and written communication and customer relationship skills; team player Must possess a valid driver's license with satisfactory driving record Must pass a background screening for work on a federal installation Time management; organizational skills Adaptability; dependability; flexibility; integrity Certificates, Licenses, Registrations Current Driver's License. Electrical License preferred. Compensation details: 29-36 PIe9a76bc615bb-7609
NEW Cytotechnologist OR CT ASCP at an Industry Leading Laboratory located in the Central New York! This state-of-the-art testing laboratory prides itself on its commitment to excellence and innovation as well as having the most advanced technology and instrumentation and automation in the field. This laboratory is looking to add a permanent and full time Cytotechnologist to their team on DAY SHIFT (Monday through Friday, 7am start time). For consideration, applicants must have his or her BS degree in Cytology (or a related field) as well as a New York State License as a Clinical Laboratory Technician or Clinical Laboratory Technologist or Cytotechnologist. CT ASCP Certificate preferred. This laboratory is offering a comprehensive benefits package including a highly competitive hourly rate and full benefits. Benefits include medical, dental and vision insurance, life insurance, financial planning, 401(K), tuition reimbursement, generous PTO and flexible work schedules! This position is also offering a Sign On Bonus! If you are interested in learning more or if you are a Cytotechnologist (or lab professional) feel free to contact or call/text ! ACC
01/07/2026
Full time
NEW Cytotechnologist OR CT ASCP at an Industry Leading Laboratory located in the Central New York! This state-of-the-art testing laboratory prides itself on its commitment to excellence and innovation as well as having the most advanced technology and instrumentation and automation in the field. This laboratory is looking to add a permanent and full time Cytotechnologist to their team on DAY SHIFT (Monday through Friday, 7am start time). For consideration, applicants must have his or her BS degree in Cytology (or a related field) as well as a New York State License as a Clinical Laboratory Technician or Clinical Laboratory Technologist or Cytotechnologist. CT ASCP Certificate preferred. This laboratory is offering a comprehensive benefits package including a highly competitive hourly rate and full benefits. Benefits include medical, dental and vision insurance, life insurance, financial planning, 401(K), tuition reimbursement, generous PTO and flexible work schedules! This position is also offering a Sign On Bonus! If you are interested in learning more or if you are a Cytotechnologist (or lab professional) feel free to contact or call/text ! ACC
NEW Cytotechnologist OR CT ASCP at an Industry Leading Laboratory located in the Central New York! This state-of-the-art testing laboratory prides itself on its commitment to excellence and innovation as well as having the most advanced technology and instrumentation and automation in the field. This laboratory is looking to add a permanent and full time Cytotechnologist to their team on DAY SHIFT (Monday through Friday, 7am start time). For consideration, applicants must have his or her BS degree in Cytology (or a related field) as well as a New York State License as a Clinical Laboratory Technician or Clinical Laboratory Technologist or Cytotechnologist. CT ASCP Certificate preferred. This laboratory is offering a comprehensive benefits package including a highly competitive hourly rate and full benefits. Benefits include medical, dental and vision insurance, life insurance, financial planning, 401(K), tuition reimbursement, generous PTO and flexible work schedules! This position is also offering a Sign On Bonus! If you are interested in learning more or if you are a Cytotechnologist (or lab professional) feel free to contact or call/text ! ACC
01/07/2026
Full time
NEW Cytotechnologist OR CT ASCP at an Industry Leading Laboratory located in the Central New York! This state-of-the-art testing laboratory prides itself on its commitment to excellence and innovation as well as having the most advanced technology and instrumentation and automation in the field. This laboratory is looking to add a permanent and full time Cytotechnologist to their team on DAY SHIFT (Monday through Friday, 7am start time). For consideration, applicants must have his or her BS degree in Cytology (or a related field) as well as a New York State License as a Clinical Laboratory Technician or Clinical Laboratory Technologist or Cytotechnologist. CT ASCP Certificate preferred. This laboratory is offering a comprehensive benefits package including a highly competitive hourly rate and full benefits. Benefits include medical, dental and vision insurance, life insurance, financial planning, 401(K), tuition reimbursement, generous PTO and flexible work schedules! This position is also offering a Sign On Bonus! If you are interested in learning more or if you are a Cytotechnologist (or lab professional) feel free to contact or call/text ! ACC
Utility Systems, Science & Software, Inc.
El Cajon, California
About Us Utility Systems Science & Software is a leader in environmental engineering solutions dedicated to protecting public health and water resources. We specialize in designing, implementing, and optimizing advanced wastewater monitoring, among other systems for municipal and industrial clients. Join our team of experts in building resilient and sustainable water infrastructure. The Role: Engineer. Manager. Innovator. We are seeking a licensed Professional Engineer (PE) with deep wastewater expertise and a track record of successful project management. You will be the technical and managerial lead for projects centered on wastewater monitoring, SCADA systems, instrumentation, and process control. You won't just design systems-you'll manage the entire project lifecycle to ensure our clients gain actionable data for regulatory compliance, process optimization, and asset protection. This is a critical role for a technical leader who thrives on client interaction and complex problem-solving. Key Responsibilities Project Leadership: Manage the full scope, schedule, budget, and quality of wastewater monitoring projects from conception (RFP) through design, procurement, installation, and commissioning. Technical Design: Lead the design and specification of wastewater monitoring networks, including flow monitoring, permanent and portable SAMPLERS, level sensors, water quality parameter sensors (DO, pH, NH3-N, etc.), and SCADA integration. Client & Regulatory Interface: Serve as the primary technical contact for clients and regulatory agencies (e.g., EPA, State DEP). Prepare and review regulatory reports (DMRs, CMOM, SSO reports) based on monitoring data. Construction & Implementation Oversight: Review contractor submittals, conduct field inspections, oversee sensor installation and calibration, and lead system startup and performance testing (SAT). Data Analysis & Reporting: Translate monitoring data into clear insights and recommendations for clients regarding infiltration/inflow (I/I), treatment process control, and capacity management. Team Development: Mentor junior engineers and coordinate with designers, field technicians, and data analysts. Who You Are (Qualifications) You Must Have: Bachelor's degree in Civil, Environmental, or Electrical Engineering. Active Professional Engineer (P.E.) license. Minimum 7+ years of civil/environmental engineering experience with a strong focus on wastewater systems. Minimum 5 years of direct project management experience, including budgeting, scheduling, and client management. Proven hands-on experience with wastewater collection system monitoring, instrumentation, and hydraulic modeling (e.g., SewerCAD, InfoWorks ICM). Exceptional communication skills for technical and non-technical audiences. What Will Make You Stand Out: Project Management Professional (PMP) certification. Direct experience designing/specifying equipment from manufacturers like Hach, YSI, Xylem, ISCO, Teledyne ISCO, or similar. Expertise in CMOM programs, SSO investigations, or wastewater metering projects. Strong data analysis skills Experience with pilot studies, condition assessment technologies (e.g., CCTV, LiDAR), and grant-funded projects. Why Join Us? Impactful Work: Your projects directly contribute to cleaner waterways and more efficient, compliant municipal systems. Technical Growth: Be at the forefront of sensor technology, data analytics, and smart water infrastructure. Career Path: Clear trajectory to Senior Project Manager, Department Lead, or Technical Director.
01/07/2026
Full time
About Us Utility Systems Science & Software is a leader in environmental engineering solutions dedicated to protecting public health and water resources. We specialize in designing, implementing, and optimizing advanced wastewater monitoring, among other systems for municipal and industrial clients. Join our team of experts in building resilient and sustainable water infrastructure. The Role: Engineer. Manager. Innovator. We are seeking a licensed Professional Engineer (PE) with deep wastewater expertise and a track record of successful project management. You will be the technical and managerial lead for projects centered on wastewater monitoring, SCADA systems, instrumentation, and process control. You won't just design systems-you'll manage the entire project lifecycle to ensure our clients gain actionable data for regulatory compliance, process optimization, and asset protection. This is a critical role for a technical leader who thrives on client interaction and complex problem-solving. Key Responsibilities Project Leadership: Manage the full scope, schedule, budget, and quality of wastewater monitoring projects from conception (RFP) through design, procurement, installation, and commissioning. Technical Design: Lead the design and specification of wastewater monitoring networks, including flow monitoring, permanent and portable SAMPLERS, level sensors, water quality parameter sensors (DO, pH, NH3-N, etc.), and SCADA integration. Client & Regulatory Interface: Serve as the primary technical contact for clients and regulatory agencies (e.g., EPA, State DEP). Prepare and review regulatory reports (DMRs, CMOM, SSO reports) based on monitoring data. Construction & Implementation Oversight: Review contractor submittals, conduct field inspections, oversee sensor installation and calibration, and lead system startup and performance testing (SAT). Data Analysis & Reporting: Translate monitoring data into clear insights and recommendations for clients regarding infiltration/inflow (I/I), treatment process control, and capacity management. Team Development: Mentor junior engineers and coordinate with designers, field technicians, and data analysts. Who You Are (Qualifications) You Must Have: Bachelor's degree in Civil, Environmental, or Electrical Engineering. Active Professional Engineer (P.E.) license. Minimum 7+ years of civil/environmental engineering experience with a strong focus on wastewater systems. Minimum 5 years of direct project management experience, including budgeting, scheduling, and client management. Proven hands-on experience with wastewater collection system monitoring, instrumentation, and hydraulic modeling (e.g., SewerCAD, InfoWorks ICM). Exceptional communication skills for technical and non-technical audiences. What Will Make You Stand Out: Project Management Professional (PMP) certification. Direct experience designing/specifying equipment from manufacturers like Hach, YSI, Xylem, ISCO, Teledyne ISCO, or similar. Expertise in CMOM programs, SSO investigations, or wastewater metering projects. Strong data analysis skills Experience with pilot studies, condition assessment technologies (e.g., CCTV, LiDAR), and grant-funded projects. Why Join Us? Impactful Work: Your projects directly contribute to cleaner waterways and more efficient, compliant municipal systems. Technical Growth: Be at the forefront of sensor technology, data analytics, and smart water infrastructure. Career Path: Clear trajectory to Senior Project Manager, Department Lead, or Technical Director.
Validation Metrologist LCMS GCMS - Greenwood Village, CO Validation Metrologist Calibration Technician Maintenance GCMS LCMS Laboratory Chemistry Analyzers _ . Serve as system administrator for various pieces of analytical chemistry laboratory equipment and oversee GGLP & GMP compliant testing. Conduct Installation, Operation, and Performance Qualification, Part 11 compliance, and similar tests. Prepare standards and samples for analysis. Evaluate and trend sample data. Initiate and perform laboratory investigations and manage change control processes. Write method transfer, validation, laboratory investigations, and Standard Operating Procedures related technical writing. Train junior metrologists. Excellent career opportunity comes with an industry competitive compensation package, bonuses, full medical benefits, 401(k) retirement plan, generous vacation time, numerous career development opportunities, and more! For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Associate Degree Minimum Experience Requirements: 2-5 years Job City Location: Greenwood Village Job State Location: CO Job Country Location: USA Salary Range: $90,000 to $140,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call
01/06/2026
Full time
Validation Metrologist LCMS GCMS - Greenwood Village, CO Validation Metrologist Calibration Technician Maintenance GCMS LCMS Laboratory Chemistry Analyzers _ . Serve as system administrator for various pieces of analytical chemistry laboratory equipment and oversee GGLP & GMP compliant testing. Conduct Installation, Operation, and Performance Qualification, Part 11 compliance, and similar tests. Prepare standards and samples for analysis. Evaluate and trend sample data. Initiate and perform laboratory investigations and manage change control processes. Write method transfer, validation, laboratory investigations, and Standard Operating Procedures related technical writing. Train junior metrologists. Excellent career opportunity comes with an industry competitive compensation package, bonuses, full medical benefits, 401(k) retirement plan, generous vacation time, numerous career development opportunities, and more! For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Associate Degree Minimum Experience Requirements: 2-5 years Job City Location: Greenwood Village Job State Location: CO Job Country Location: USA Salary Range: $90,000 to $140,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call
Metrologist Calibration Tech GCMS LCMS - Frederick, CO Validation Metrologist Calibration Technician Maintenance GCMS LCMS Laboratory Chemistry Analyzers _ . Provide calibration, repair, maintenance, and other instrument support activities for precision lab equipment in Pharmaceutical Research & Development Lab. Calibrate, validate, maintain, and repair pipettes, balances, incubators, spectrophotometers, high performance liquid chromatographs, gas chromatographs, centrifuges, thermometers, bioreactors, fume hoods, and other lab equipment. Ensure all test equipment is maintained and calibrated. Prepare calibration reports, certificates, and service orders. Interface with Chemists, Engineers and other Technicians. Assist in training other technicians. Benefit from corporate paid training and receive full medical, dental, health benefits as well as other employee perks. For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Associate Degree Minimum Experience Requirements: 2-5 years Job City Location: Frederick Job State Location: CO Job Country Location: USA Salary Range: $90,000 to $140,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call .
01/06/2026
Full time
Metrologist Calibration Tech GCMS LCMS - Frederick, CO Validation Metrologist Calibration Technician Maintenance GCMS LCMS Laboratory Chemistry Analyzers _ . Provide calibration, repair, maintenance, and other instrument support activities for precision lab equipment in Pharmaceutical Research & Development Lab. Calibrate, validate, maintain, and repair pipettes, balances, incubators, spectrophotometers, high performance liquid chromatographs, gas chromatographs, centrifuges, thermometers, bioreactors, fume hoods, and other lab equipment. Ensure all test equipment is maintained and calibrated. Prepare calibration reports, certificates, and service orders. Interface with Chemists, Engineers and other Technicians. Assist in training other technicians. Benefit from corporate paid training and receive full medical, dental, health benefits as well as other employee perks. For complete details contact Christopher Moreno at: ext 264 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Education Requirements: Associate Degree Minimum Experience Requirements: 2-5 years Job City Location: Frederick Job State Location: CO Job Country Location: USA Salary Range: $90,000 to $140,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Metrologist Maintenance Calibration Technician Metrology Analytical Laboratory Instrumentation Validation Chromatography Mass Spectrometry HPLC UPLC GC MS GC/MS Chemistry Analyzers DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call .
Overview The Surgical Technician functions as an integral part of the perioperative team as the first, second, or assisting surgical technician or second circulator under the direct supervision of the registered nurse (RN). Qualifications Education Level Field of Study Associate's Degree Surgical Technology Or Certificate of Completion Surgical Technology Licenses/Certifications Basic Life Support (BLS) within 30 days - American Heart Association (AHA) Specialized Knowledge and Skills Requirements Independently scrubs basic surgical procedures. Demonstrates ability to problem solve in relation to the procedure being performed. Applied basic knowledge of anatomy and physiology, medical terminology, microbiology, and pharmacology for optimal surgical patient care. Applies basic knowledge of electricity, chemistry, computers, robotics, and lasers for optimal surgical patient care. Demonstrates knowledge and practice of patient care concepts and perioperative teamwork. Applies principles of sterile technique during surgical procedures. Responsibilities Essential Functions Applies the principles of asepsis in a knowledgeable manner to maintain a sterile environment. Demonstrates competency in select technical and psychomotor skills, judgment and appropriate knowledge base. Provides age specific care to obstetrical patients in accordance with the established policies and procedures of the department. Assists in organization and coordination of supplies and equipment to maintain an efficient and cost effective department. Effectively facilitates communication for the unit with all departments. Answers the phone, informs nursing staff of needed tests, exams or significant problems with patients on the nursing unit. Serves as a liaison between nursing units. Collects data on assigned patients as directed by the RN and the unit based performance standards. Performs accurate documentation duties on the nursing unit and in patient records as directed by unit based performance standards and guidelines. Transcribes physician orders accurately and in a timely manner. Schedules appointments, consults, diagnostic tests and examinations for patients on nursing unit. Initiates, compiles and maintains patient charts. Performs or assists patients with the activities of daily living. Prepares patients for transportation and/or transport. Maintains accurate log of admission, discharge & transfer of patient on computer in a timely manner. Ensures patient charges are entered. Participates in Quality Assessment / Performance Improvement and Infection Control Committee's as needed. Assists with supply ordering, inventory control, and supply chain management as necessary. Collaborates with surgeons and OR team to ensure needed trays, instrumentation, and supplies are ready for each procedure. Department Specific Job Function Efficient with asepsis to maintain a sterile environment. Assists with stocking, and communicates with inventory specialist regarding supplies and instruments needed. Collaborates with surgeons and OR team to ensure needed trays are available. Utilizes preference cards to assure specialized supplies are available. Assist with cleaning and sterilization of instruments needed. Proper disposal of trash/sharps. Prep patient and participate in Time Out. Assist with room turnover. About Us Find it here. Discover the job, the career, the purpose you were meant for. The supportive and inclusive team where you can thrive. The place where growth meets balance - and opportunities meet flexibility. Find it all at Carle Health. Based in Urbana, IL, Carle Health is a healthcare system with nearly 16,600 team members in its eight hospitals, physician groups and a variety of healthcare businesses. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. The system includes Methodist College and Carle Illinois College of Medicine, the world's first engineering-based medical school, and Health Alliance . We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $22.75per hour - $37.99per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
01/05/2026
Full time
Overview The Surgical Technician functions as an integral part of the perioperative team as the first, second, or assisting surgical technician or second circulator under the direct supervision of the registered nurse (RN). Qualifications Education Level Field of Study Associate's Degree Surgical Technology Or Certificate of Completion Surgical Technology Licenses/Certifications Basic Life Support (BLS) within 30 days - American Heart Association (AHA) Specialized Knowledge and Skills Requirements Independently scrubs basic surgical procedures. Demonstrates ability to problem solve in relation to the procedure being performed. Applied basic knowledge of anatomy and physiology, medical terminology, microbiology, and pharmacology for optimal surgical patient care. Applies basic knowledge of electricity, chemistry, computers, robotics, and lasers for optimal surgical patient care. Demonstrates knowledge and practice of patient care concepts and perioperative teamwork. Applies principles of sterile technique during surgical procedures. Responsibilities Essential Functions Applies the principles of asepsis in a knowledgeable manner to maintain a sterile environment. Demonstrates competency in select technical and psychomotor skills, judgment and appropriate knowledge base. Provides age specific care to obstetrical patients in accordance with the established policies and procedures of the department. Assists in organization and coordination of supplies and equipment to maintain an efficient and cost effective department. Effectively facilitates communication for the unit with all departments. Answers the phone, informs nursing staff of needed tests, exams or significant problems with patients on the nursing unit. Serves as a liaison between nursing units. Collects data on assigned patients as directed by the RN and the unit based performance standards. Performs accurate documentation duties on the nursing unit and in patient records as directed by unit based performance standards and guidelines. Transcribes physician orders accurately and in a timely manner. Schedules appointments, consults, diagnostic tests and examinations for patients on nursing unit. Initiates, compiles and maintains patient charts. Performs or assists patients with the activities of daily living. Prepares patients for transportation and/or transport. Maintains accurate log of admission, discharge & transfer of patient on computer in a timely manner. Ensures patient charges are entered. Participates in Quality Assessment / Performance Improvement and Infection Control Committee's as needed. Assists with supply ordering, inventory control, and supply chain management as necessary. Collaborates with surgeons and OR team to ensure needed trays, instrumentation, and supplies are ready for each procedure. Department Specific Job Function Efficient with asepsis to maintain a sterile environment. Assists with stocking, and communicates with inventory specialist regarding supplies and instruments needed. Collaborates with surgeons and OR team to ensure needed trays are available. Utilizes preference cards to assure specialized supplies are available. Assist with cleaning and sterilization of instruments needed. Proper disposal of trash/sharps. Prep patient and participate in Time Out. Assist with room turnover. About Us Find it here. Discover the job, the career, the purpose you were meant for. The supportive and inclusive team where you can thrive. The place where growth meets balance - and opportunities meet flexibility. Find it all at Carle Health. Based in Urbana, IL, Carle Health is a healthcare system with nearly 16,600 team members in its eight hospitals, physician groups and a variety of healthcare businesses. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. The system includes Methodist College and Carle Illinois College of Medicine, the world's first engineering-based medical school, and Health Alliance . We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $22.75per hour - $37.99per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
NEW Cytotechnologist OR CT ASCP at an Industry Leading Laboratory located in the Central New York! This state-of-the-art testing laboratory prides itself on its commitment to excellence and innovation as well as having the most advanced technology and instrumentation and automation in the field. This laboratory is looking to add a permanent and full time Cytotechnologist to their team on DAY SHIFT (Monday through Friday, 7am start time). For consideration, applicants must have his or her BS degree in Cytology (or a related field) as well as a New York State License as a Clinical Laboratory Technician or Clinical Laboratory Technologist or Cytotechnologist. CT ASCP Certificate preferred. This laboratory is offering a comprehensive benefits package including a highly competitive hourly rate and full benefits. Benefits include medical, dental and vision insurance, life insurance, financial planning, 401(K), tuition reimbursement, generous PTO and flexible work schedules! This position is also offering a Sign On Bonus! If you are interested in learning more or if you are a Cytotechnologist (or lab professional) feel free to contact or call/text ! ACC
01/03/2026
Full time
NEW Cytotechnologist OR CT ASCP at an Industry Leading Laboratory located in the Central New York! This state-of-the-art testing laboratory prides itself on its commitment to excellence and innovation as well as having the most advanced technology and instrumentation and automation in the field. This laboratory is looking to add a permanent and full time Cytotechnologist to their team on DAY SHIFT (Monday through Friday, 7am start time). For consideration, applicants must have his or her BS degree in Cytology (or a related field) as well as a New York State License as a Clinical Laboratory Technician or Clinical Laboratory Technologist or Cytotechnologist. CT ASCP Certificate preferred. This laboratory is offering a comprehensive benefits package including a highly competitive hourly rate and full benefits. Benefits include medical, dental and vision insurance, life insurance, financial planning, 401(K), tuition reimbursement, generous PTO and flexible work schedules! This position is also offering a Sign On Bonus! If you are interested in learning more or if you are a Cytotechnologist (or lab professional) feel free to contact or call/text ! ACC
NEW Cytotechnologist OR CT ASCP at an Industry Leading Laboratory located in the Central New York! This state-of-the-art testing laboratory prides itself on its commitment to excellence and innovation as well as having the most advanced technology and instrumentation and automation in the field. This laboratory is looking to add a permanent and full time Cytotechnologist to their team on DAY SHIFT (Monday through Friday, 7am start time). For consideration, applicants must have his or her BS degree in Cytology (or a related field) as well as a New York State License as a Clinical Laboratory Technician or Clinical Laboratory Technologist or Cytotechnologist. CT ASCP Certificate preferred. This laboratory is offering a comprehensive benefits package including a highly competitive hourly rate and full benefits. Benefits include medical, dental and vision insurance, life insurance, financial planning, 401(K), tuition reimbursement, generous PTO and flexible work schedules! This position is also offering a Sign On Bonus! If you are interested in learning more or if you are a Cytotechnologist (or lab professional) feel free to contact or call/text ! ACC
01/03/2026
Full time
NEW Cytotechnologist OR CT ASCP at an Industry Leading Laboratory located in the Central New York! This state-of-the-art testing laboratory prides itself on its commitment to excellence and innovation as well as having the most advanced technology and instrumentation and automation in the field. This laboratory is looking to add a permanent and full time Cytotechnologist to their team on DAY SHIFT (Monday through Friday, 7am start time). For consideration, applicants must have his or her BS degree in Cytology (or a related field) as well as a New York State License as a Clinical Laboratory Technician or Clinical Laboratory Technologist or Cytotechnologist. CT ASCP Certificate preferred. This laboratory is offering a comprehensive benefits package including a highly competitive hourly rate and full benefits. Benefits include medical, dental and vision insurance, life insurance, financial planning, 401(K), tuition reimbursement, generous PTO and flexible work schedules! This position is also offering a Sign On Bonus! If you are interested in learning more or if you are a Cytotechnologist (or lab professional) feel free to contact or call/text ! ACC
Description: Responsible for calibrating a variety of test instruments for one or more skill areas, such as: Electrical Equipment Industrial Equipment Temperature Equipment Perform standards maintenance & checking of company standards if assigned by Lab Manager Collect calibration data and record information on data sheets. Complete calibration certifications, including out of tolerance conditions. Continue to be trained in all aspects of Micro Precision Calibration Services and share gained knowledge and other best practices with other team members Observe safety precautions and quality standards in the performance of tasks and compliy with the company Clearly communicate calibration issues and procedures with customers and coworkers on the phone, in person and through email Requirements: Valid Driver's License Basic Knowledge of Mechanical and Dimensional equipment preferred Experience in basic instrumentation and manual tools preferred Basic mathematics understanding Excellent interpersonal and communication skills Experience in MS Word and Excel Ability to work both independently and under the supervision of Senior Technicians Ability to lift up to 50 lbs. without assistance Must be a U.S. Citizen Training We accept applicants new to the calibration industry who are eager to learn Work Environment Work performed in local laboratory and at customer facilities Up to 25% out of town, overnight travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental and Vision Insurance, along with FSA 2 weeks vacation and 6 days sick time annually PIfc86-9937
01/02/2026
Full time
Description: Responsible for calibrating a variety of test instruments for one or more skill areas, such as: Electrical Equipment Industrial Equipment Temperature Equipment Perform standards maintenance & checking of company standards if assigned by Lab Manager Collect calibration data and record information on data sheets. Complete calibration certifications, including out of tolerance conditions. Continue to be trained in all aspects of Micro Precision Calibration Services and share gained knowledge and other best practices with other team members Observe safety precautions and quality standards in the performance of tasks and compliy with the company Clearly communicate calibration issues and procedures with customers and coworkers on the phone, in person and through email Requirements: Valid Driver's License Basic Knowledge of Mechanical and Dimensional equipment preferred Experience in basic instrumentation and manual tools preferred Basic mathematics understanding Excellent interpersonal and communication skills Experience in MS Word and Excel Ability to work both independently and under the supervision of Senior Technicians Ability to lift up to 50 lbs. without assistance Must be a U.S. Citizen Training We accept applicants new to the calibration industry who are eager to learn Work Environment Work performed in local laboratory and at customer facilities Up to 25% out of town, overnight travel All qualified applicants will receive consideration for employment at Micro Precision without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status Benefits 401(k) 401(k) matching Medical, Dental and Vision Insurance, along with FSA 2 weeks vacation and 6 days sick time annually PIfc86-9937
Description: Performs electronic calibrations and/or repairs on general purpose and/or specialized measuring and test equipment. Responsibility, Accountability and Decision Making - Normally receives detailed instructions on work; acquires job skills and learns company policies and procedures to complete routine tasks; works on assignments that are routine in nature where limited judgement is required. Duties and Responsbilities: Technical - Performs calibrations in one or more of the following skill areas, as applicable: bio-med instrumentation electronic standards fiber optics LCR and impedance nuclear and radiation physics oscilloscopes particle counters photo/radiometric optometry RADAR RF/microwave power, frequency, and impedance sound pressure level spectrophotometry (including standards) spectrum and network analysis, time interval and frequency vibration video voltage & current waveform analysis, phase and distortion. Communication and Interaction - Communicates conversationally and in writing with coherent sentence structure to all employees; regularly interacts with other technicians and sometimes with CSRs and Purchasing; interaction normally involves exchange of factual information. Leadership - Acts on important opportunities as they arise, sometimes with assistance; willing to act with a minimum of planning; learning to translate ideas into actions; does not hesitate to pursue a sound, innovative idea; works quickly; enthusiastic about assignments; willing to learn; acts ethically and honestly, identifies others whose behavior is not in line with the organization's convictions; words and actions are consistent; strives to excel; follows instructions accurately and in a timely manner, taking responsibility for assigned tasks and completing them as expected. Requirements: General Education and Training - HS Diploma with Algebra, no previous calibration training required. Skills - Performs algebraic equations with ease PI5c83ba6f5-
01/02/2026
Full time
Description: Performs electronic calibrations and/or repairs on general purpose and/or specialized measuring and test equipment. Responsibility, Accountability and Decision Making - Normally receives detailed instructions on work; acquires job skills and learns company policies and procedures to complete routine tasks; works on assignments that are routine in nature where limited judgement is required. Duties and Responsbilities: Technical - Performs calibrations in one or more of the following skill areas, as applicable: bio-med instrumentation electronic standards fiber optics LCR and impedance nuclear and radiation physics oscilloscopes particle counters photo/radiometric optometry RADAR RF/microwave power, frequency, and impedance sound pressure level spectrophotometry (including standards) spectrum and network analysis, time interval and frequency vibration video voltage & current waveform analysis, phase and distortion. Communication and Interaction - Communicates conversationally and in writing with coherent sentence structure to all employees; regularly interacts with other technicians and sometimes with CSRs and Purchasing; interaction normally involves exchange of factual information. Leadership - Acts on important opportunities as they arise, sometimes with assistance; willing to act with a minimum of planning; learning to translate ideas into actions; does not hesitate to pursue a sound, innovative idea; works quickly; enthusiastic about assignments; willing to learn; acts ethically and honestly, identifies others whose behavior is not in line with the organization's convictions; words and actions are consistent; strives to excel; follows instructions accurately and in a timely manner, taking responsibility for assigned tasks and completing them as expected. Requirements: General Education and Training - HS Diploma with Algebra, no previous calibration training required. Skills - Performs algebraic equations with ease PI5c83ba6f5-
Peckham Industries Location: Brewster, NY Pay Range: $27.00 - $30.00 Salary Interval: Full Time Description: Application Instructions About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our " family by choice " philosophy delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the company's construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Position Description Job Summary: The Automation Technician will work with a major mining and road material supplier. This position will support automation and electrical systems at quarry, hot mix, and asphalt operations. Essential Functions: 1. Ownership and caring. Maintain, modify, upgrade and repair the existing SCADA systems, PLC control systems and instrumentation 2. Dedication. Install, program, calibrate analytical instrumentation, scales, VFD's and/or PLC's 3. Compulsive Tinkering. Troubleshoot industrial plant automation equipment networks, sensors, and control 4. Focused. Design and install wiring, troubleshoot control circuits from 12 to 480 volts. 5. Committed to serve. Provide In-house and field technical support of PLC based control systems 6. Mastery. Perform all aspects of start-up and commissioning of the control system 7. Determined. Debug developed and installed software packages 8. Results matter. Ensures all changes and modifications are properly documented Position Requirements Requirements, Education and Experience: 1. Degree or experience in industrial automation, electrical or related field, preferred. 2. Strong mechanical aptitude and troubleshooting skills 3. Understanding of both analog and digital control systems 4. Willingness to work weekends and extended hours if a project requires. On-call, ready to respond to unplanned downtime. 5. Working knowledge of national and international electrical and safety codes and practices 6. Ability to read blueprints, electrical schematics, and control panel wiring diagram 7. Ability to work effectively in mix of office and hazardous environments. 8. Self-motivated to seek out problems and create solutions independently. 9. High School Diploma or GED, preferred. 10. Proficient verbal and written English 11. Legal right to work in the U.S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require up to 80% travel by personal vehicle to offices throughout the state of New York, and New England based on the needs of the business. Work Environment/Physical Demands: This job operates in an office and field environments. This role routinely uses standard office equipment such as computers, phones, photocopiers. This job will require going out in the field and various organizations to utilize and troubleshoot computer equipment. This would require the ability to sit at a desk, frequent walking, bending or standing as necessary. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. EEO: Peckham is an Equal Employment Opportunity Employer. Peckham provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Equal Opportunity Employer Peckham Industries Inc. is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact . Compensation details: 27-30 Hourly Wage PI5f53f5-
01/02/2026
Full time
Peckham Industries Location: Brewster, NY Pay Range: $27.00 - $30.00 Salary Interval: Full Time Description: Application Instructions About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our " family by choice " philosophy delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the company's construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Position Description Job Summary: The Automation Technician will work with a major mining and road material supplier. This position will support automation and electrical systems at quarry, hot mix, and asphalt operations. Essential Functions: 1. Ownership and caring. Maintain, modify, upgrade and repair the existing SCADA systems, PLC control systems and instrumentation 2. Dedication. Install, program, calibrate analytical instrumentation, scales, VFD's and/or PLC's 3. Compulsive Tinkering. Troubleshoot industrial plant automation equipment networks, sensors, and control 4. Focused. Design and install wiring, troubleshoot control circuits from 12 to 480 volts. 5. Committed to serve. Provide In-house and field technical support of PLC based control systems 6. Mastery. Perform all aspects of start-up and commissioning of the control system 7. Determined. Debug developed and installed software packages 8. Results matter. Ensures all changes and modifications are properly documented Position Requirements Requirements, Education and Experience: 1. Degree or experience in industrial automation, electrical or related field, preferred. 2. Strong mechanical aptitude and troubleshooting skills 3. Understanding of both analog and digital control systems 4. Willingness to work weekends and extended hours if a project requires. On-call, ready to respond to unplanned downtime. 5. Working knowledge of national and international electrical and safety codes and practices 6. Ability to read blueprints, electrical schematics, and control panel wiring diagram 7. Ability to work effectively in mix of office and hazardous environments. 8. Self-motivated to seek out problems and create solutions independently. 9. High School Diploma or GED, preferred. 10. Proficient verbal and written English 11. Legal right to work in the U.S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require up to 80% travel by personal vehicle to offices throughout the state of New York, and New England based on the needs of the business. Work Environment/Physical Demands: This job operates in an office and field environments. This role routinely uses standard office equipment such as computers, phones, photocopiers. This job will require going out in the field and various organizations to utilize and troubleshoot computer equipment. This would require the ability to sit at a desk, frequent walking, bending or standing as necessary. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. EEO: Peckham is an Equal Employment Opportunity Employer. Peckham provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Equal Opportunity Employer Peckham Industries Inc. is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact . Compensation details: 27-30 Hourly Wage PI5f53f5-