On-site at our Prince George, VA facility. This requisition is to support a new factory startup manufacturing large form-factor equipment. The product will be large (shipping container size), heavy (50+ tons), and complex. This position will be part of the core factory startup and onboarding team responsible for building the operations and manufacturing staff, fitting out the building, and creating the process flow/work instructions/etc. from the ground up. Skills to include: panel and point to point wire assembly, Medium Voltage, Low Voltage, and High Power Electronic assemblies. Test Engineer 2: Requires 2+ years of experience SUMMARY Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. LEADERSHIP AND MANAGEMENT RESPONSIBILITIES: Recruitment and Retention: Recruit and interview Process Technicians. Communicate criteria to recruiters for Process Technician position candidates. Coach technicians in the interviewing/hiring process. Monitor team member turnover; identify key factors that can be improved; make improvements. Employee and Team Development: Identify individual and team strengths and development needs on an ongoing basis. Create and/or validate training curriculum in area of responsibility. Coach and mentor Process Technicians to deliver excellence to every internal and external customer. Performance Management: Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals). Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member's contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback. Express pride in staff and encourage them to feel good about their accomplishments. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of large teams and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. Communication: Provide communication forum for the exchange of ideas and information with the department. Organize verbal and written ideas clearly and use an appropriate business style. Ask questions; encourage input from team members. Assess communication style of individual team members and adapt own communication style accordingly. TECHNICAL MANAGEMENT RESPONSIBILITIES Review circuit board designs for testability requirements. Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment. Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production. Generate reports and analysis of test data, prepares documentation and recommendations. Review test equipment designs, data and RMA issues with customers regularly. Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment. Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data. Determine conditions under which tests are to be conducted and sequences and phases of test operations. Direct and exercise control over operational, functional, and performance phases of tests. Perform moderately complex assignments of the engineering test function for standard and/or custom devices. Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel. Develop or use computer software and hardware to conduct tests on machinery and equipment. Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards. Provide training in new procedures to production testing staff. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience Minimum of 3 years of experience with medium/high-voltage electrical testing in a high-voltage manufacturing environment (preferred). Experience running and setting up HIPOT tests (dielectric and insulation testing); HIPOT certification preferred. Ability to ensure safe test operations and identify and address safety risks. Strong troubleshooting skills for systems and equipment. Experience creating documentation for test technicians and operators. Comprehensive understanding of high-voltage standard practices, including safe handling of high-voltage materials and equipment. Ability to identify issues that could compromise high-voltage system integrity. Demonstrated understanding of high-voltage and conductive properties, including arc flash and short-circuit hazards. Completion of relevant specialized training (e.g., OSHA, NFPA 70E, Arc Flash PPE, LOTO, high-voltage handling and grounding procedures). LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC's and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual's primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate. What Can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K Match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities
06/25/2026
Full time
On-site at our Prince George, VA facility. This requisition is to support a new factory startup manufacturing large form-factor equipment. The product will be large (shipping container size), heavy (50+ tons), and complex. This position will be part of the core factory startup and onboarding team responsible for building the operations and manufacturing staff, fitting out the building, and creating the process flow/work instructions/etc. from the ground up. Skills to include: panel and point to point wire assembly, Medium Voltage, Low Voltage, and High Power Electronic assemblies. Test Engineer 2: Requires 2+ years of experience SUMMARY Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. LEADERSHIP AND MANAGEMENT RESPONSIBILITIES: Recruitment and Retention: Recruit and interview Process Technicians. Communicate criteria to recruiters for Process Technician position candidates. Coach technicians in the interviewing/hiring process. Monitor team member turnover; identify key factors that can be improved; make improvements. Employee and Team Development: Identify individual and team strengths and development needs on an ongoing basis. Create and/or validate training curriculum in area of responsibility. Coach and mentor Process Technicians to deliver excellence to every internal and external customer. Performance Management: Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals). Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member's contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback. Express pride in staff and encourage them to feel good about their accomplishments. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of large teams and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. Communication: Provide communication forum for the exchange of ideas and information with the department. Organize verbal and written ideas clearly and use an appropriate business style. Ask questions; encourage input from team members. Assess communication style of individual team members and adapt own communication style accordingly. TECHNICAL MANAGEMENT RESPONSIBILITIES Review circuit board designs for testability requirements. Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment. Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production. Generate reports and analysis of test data, prepares documentation and recommendations. Review test equipment designs, data and RMA issues with customers regularly. Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment. Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data. Determine conditions under which tests are to be conducted and sequences and phases of test operations. Direct and exercise control over operational, functional, and performance phases of tests. Perform moderately complex assignments of the engineering test function for standard and/or custom devices. Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel. Develop or use computer software and hardware to conduct tests on machinery and equipment. Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards. Provide training in new procedures to production testing staff. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience Minimum of 3 years of experience with medium/high-voltage electrical testing in a high-voltage manufacturing environment (preferred). Experience running and setting up HIPOT tests (dielectric and insulation testing); HIPOT certification preferred. Ability to ensure safe test operations and identify and address safety risks. Strong troubleshooting skills for systems and equipment. Experience creating documentation for test technicians and operators. Comprehensive understanding of high-voltage standard practices, including safe handling of high-voltage materials and equipment. Ability to identify issues that could compromise high-voltage system integrity. Demonstrated understanding of high-voltage and conductive properties, including arc flash and short-circuit hazards. Completion of relevant specialized training (e.g., OSHA, NFPA 70E, Arc Flash PPE, LOTO, high-voltage handling and grounding procedures). LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC's and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual's primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate. What Can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K Match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities
Network Systems Specialist Job Overview: Join our team as a Network Communications Systems Specialist, where you'll lead in overseeing network management functions, integrated control centers, and multichannel communications systems. You'll play a pivotal role in managing network operations and communications systems. Your responsibilities include installing tactical fiber and cable wiring, troubleshooting network assets, and performing routine maintenance checks on various equipment, contributing to seamless operational support. Requirements: Attend a 29-week paid training program to gain skills and certifications in communication network operations, electronic troubleshooting, fiberoptic cable installation, network engineering, and hardware maintenance. Advanced certifications require additional full funded training programs. Benefits: Comprehensive Healthcare, Vision, and Dental plans.30 days paid vacation.90 days paid paternity and maternity vacation.Comprehensive wellness programs including fitness facility access, nutrition consulting, curated fitness plans, and more.Housing, clothing, and relocation allowance.Tuition assistance.Student loan repayment.Flexible retirement and pension plans Pay and Promotion: Entry pay and promotions vary based on education level and qualifications.Hiring bonus opportunities available.Specialty bonuses available depending on qualifications and position.Guaranteed promotion opportunities. Additional Career Opportunities: Upon successful completion of first term contract, you are guaranteed up to 5 interviews with your choice 1,200 industry leading organizations including Charter Communications, Tesla, and COX Communications. Similar Career Fields Include: Internetworking Technician, Radio, Cellular, and Tower Equipment Installers and Repairers, Computer System Analyst. About Our Organization: The U.S. Army offers a variety of possibilities for to discover your true potential - whether you are looking to gain technical expertise, travel the world, or serve your community, the Army's unique career opportunities and comprehensive benefits package will enable you to achieve your goals. Be All You Can Be. Now Hiring Full and Part Time Positions. Click apply for an Interview
06/25/2026
Full time
Network Systems Specialist Job Overview: Join our team as a Network Communications Systems Specialist, where you'll lead in overseeing network management functions, integrated control centers, and multichannel communications systems. You'll play a pivotal role in managing network operations and communications systems. Your responsibilities include installing tactical fiber and cable wiring, troubleshooting network assets, and performing routine maintenance checks on various equipment, contributing to seamless operational support. Requirements: Attend a 29-week paid training program to gain skills and certifications in communication network operations, electronic troubleshooting, fiberoptic cable installation, network engineering, and hardware maintenance. Advanced certifications require additional full funded training programs. Benefits: Comprehensive Healthcare, Vision, and Dental plans.30 days paid vacation.90 days paid paternity and maternity vacation.Comprehensive wellness programs including fitness facility access, nutrition consulting, curated fitness plans, and more.Housing, clothing, and relocation allowance.Tuition assistance.Student loan repayment.Flexible retirement and pension plans Pay and Promotion: Entry pay and promotions vary based on education level and qualifications.Hiring bonus opportunities available.Specialty bonuses available depending on qualifications and position.Guaranteed promotion opportunities. Additional Career Opportunities: Upon successful completion of first term contract, you are guaranteed up to 5 interviews with your choice 1,200 industry leading organizations including Charter Communications, Tesla, and COX Communications. Similar Career Fields Include: Internetworking Technician, Radio, Cellular, and Tower Equipment Installers and Repairers, Computer System Analyst. About Our Organization: The U.S. Army offers a variety of possibilities for to discover your true potential - whether you are looking to gain technical expertise, travel the world, or serve your community, the Army's unique career opportunities and comprehensive benefits package will enable you to achieve your goals. Be All You Can Be. Now Hiring Full and Part Time Positions. Click apply for an Interview
What you will do As a Reliability Engineer you will review and participate in capital projects to ensure total cost of ownership is considered, Own and optimize the preventive and predictive maintenance processes and systematically identify and eliminate production losses and asset failures through Risk Based Asset Management and Life Cycle Asset Management (LCAM). You will lead efforts to ensure reliability and maintainability of equipment, processes, utilities, facilities, controls, and safety/security systems. Professionally and systematically defines, designs, develops, monitors and refines an Asset Maintenance Plan that includes Value-added preventive maintenance tasks and Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems Applies value analysis to repair/replace, repair/redesign, and make/buy decisions The usage of MFMEA at the plants. How you will do it Reduce assets reliability risks for new projects and existing assets Elaborate and validate Master Routines per technology (MR) including Plant's feedback supported by SME's Standardization of Master Routines Master Routines long term Governance Preventive Maintenance routines optimization Supports MFMEA and root cause analysis Liaison between Technology SME's and Plant Maintenance Engineers Spare parts optimization Provides engineering maintenance support to the Plants. Executes PdM master plan in the plants Provides training to PdM Technicians Participates in the development of design and installation specifications along with commissioning plans Participates in the development of criteria for and evaluation of equipment and technical MRO suppliers and technical maintenance service providers. Participates in the final check out of new installations. This includes factory and site acceptance testing that will assure adherence to functional specifications. What we look for Bachelor's degree in Engineering required Mechanical/Electrical Engineering degree or similar discipline preferred 5 + years of experience in a maintenance engineering role required. 5+ years of experience working with reliability engineering-related processes required. Certified Maintenance and Reliability Professional desired Must have an understanding of Lean, Six Sigma, and TPM. Lean-Six Sigma Black belt certification desired Must fully domain the Reliability Centered Maintenance (RCM) process, Asset Management & condition monitoring principles, tools and application Expertise in all areas of maintenance and reliability, material management, planning and scheduling, and/or CMMS / EAM / ERP optimization is desired Proficient on Popular CMMS solutions like Maximo 7.6, SAP Maintenance & Prisma Should have good oral/written communication skills and possess tact. Able to talk in public and teach large groups Requires 30% travel What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, and Employee Assistance Program Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2025's Most Ethical Companies by Ethisphere. This prestigious recognition marks the third consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. Equal Employment Opportunity: We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing . We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report . We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To All Recruitment Agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.
06/25/2026
Full time
What you will do As a Reliability Engineer you will review and participate in capital projects to ensure total cost of ownership is considered, Own and optimize the preventive and predictive maintenance processes and systematically identify and eliminate production losses and asset failures through Risk Based Asset Management and Life Cycle Asset Management (LCAM). You will lead efforts to ensure reliability and maintainability of equipment, processes, utilities, facilities, controls, and safety/security systems. Professionally and systematically defines, designs, develops, monitors and refines an Asset Maintenance Plan that includes Value-added preventive maintenance tasks and Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems Applies value analysis to repair/replace, repair/redesign, and make/buy decisions The usage of MFMEA at the plants. How you will do it Reduce assets reliability risks for new projects and existing assets Elaborate and validate Master Routines per technology (MR) including Plant's feedback supported by SME's Standardization of Master Routines Master Routines long term Governance Preventive Maintenance routines optimization Supports MFMEA and root cause analysis Liaison between Technology SME's and Plant Maintenance Engineers Spare parts optimization Provides engineering maintenance support to the Plants. Executes PdM master plan in the plants Provides training to PdM Technicians Participates in the development of design and installation specifications along with commissioning plans Participates in the development of criteria for and evaluation of equipment and technical MRO suppliers and technical maintenance service providers. Participates in the final check out of new installations. This includes factory and site acceptance testing that will assure adherence to functional specifications. What we look for Bachelor's degree in Engineering required Mechanical/Electrical Engineering degree or similar discipline preferred 5 + years of experience in a maintenance engineering role required. 5+ years of experience working with reliability engineering-related processes required. Certified Maintenance and Reliability Professional desired Must have an understanding of Lean, Six Sigma, and TPM. Lean-Six Sigma Black belt certification desired Must fully domain the Reliability Centered Maintenance (RCM) process, Asset Management & condition monitoring principles, tools and application Expertise in all areas of maintenance and reliability, material management, planning and scheduling, and/or CMMS / EAM / ERP optimization is desired Proficient on Popular CMMS solutions like Maximo 7.6, SAP Maintenance & Prisma Should have good oral/written communication skills and possess tact. Able to talk in public and teach large groups Requires 30% travel What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, and Employee Assistance Program Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2025's Most Ethical Companies by Ethisphere. This prestigious recognition marks the third consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. Equal Employment Opportunity: We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing . We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report . We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To All Recruitment Agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.
Job Description Job Description Agave Mechanical Phoenix Metropolitan Area Agave Mechanical is hiring a skilled Commercial HVAC Foreman/Installer to join our growing installation team in Phoenix, Arizona. We are a locally owned and operated commercial HVAC company serving customers throughout the Phoenix metro area, focused on quality installations, safety, and long-term system performance. This role is ideal for a highly experienced Commercial HVAC Journeyman Installer looking for steady year-round work, competitive pay, and growth opportunities within a professional, well-supported team. Position Overview Agave Mechanical is seeking a dynamic and experienced Commercial HVAC Journeyman Installer to join our growing team. In this key leadership role, you will oversee and execute commercial HVAC installation projects from start to finish while remaining hands-on in the field. Your expertise will ensure projects are completed safely, efficiently, and to the highest quality standards. This position is ideal for a skilled commercial installer ready to take on leadership responsibilities, mentor team members, and collaborate closely with project managers and contractors in a fast-paced environment. Compensation $35.00 - $50.00 per hour, Depending on Experience Weekly payroll Benefits & Perks Paid time off (PTO) Paid holidays Paid sick time Health insurance Yearly bonus plan Year-round work in the Phoenix market Company-provided take-home service vehicle Company-provided smartphone or virtual phone and fuel card Company-provided large service tools and specialty tools Ongoing HVAC training and professional development Annual performance evaluations Strong opportunity for advancement within the companyKey Responsibilities Lead and manage commercial HVAC installation projects from start to completion Install and oversee installation of rooftop units, ductwork, and complete HVAC systems Read, interpret, and execute work from blueprints, schematics, and project specifications Accurately measure, fabricate, and install sheet metal components Coordinate daily job site activities and assign tasks to installation team members Collaborate closely with project managers, contractors, and other trades Ensure installations meet company standards, manufacturer requirements, and local codes Conduct system testing, commissioning, and final inspections Perform troubleshooting, repair, and adjustments as needed during installation Enforce safety protocols and maintain a safe, organized job site Provide guidance and mentorship to journeyman and apprentice installers Communicate job progress, material needs, and scheduling updates to management Maintain accurate documentation of installation processes and job completion Required Qualifications 5+ years of commercial HVAC installation experience Prior leadership, foreman, or lead installer experience required Strong ability to read and interpret blueprints, schematics, and specifications Extensive experience with commercial HVAC systems, ductwork, and mechanical components Knowledge of HVAC-related plumbing connections and system layouts Working knowledge of air conditioning and mechanical systems Experience using diagnostic tools and performing equipment troubleshooting Strong communication, organizational, and leadership skills Ability to work independently while leading a team effectively Commitment to safety, quality workmanship, and professionalism Valid driver's license and ability to supervise commercial job sites Why Work at Agave Mechanical? Agave Mechanical offers consistent work, strong leadership, and a professional environment where installers are supported with the tools, training, and structure needed to succeed. If you're a commercial HVAC installer in Arizona looking to grow your career, we'd like to hear from you. Company Description Agave Mechanical is a locally owned and operated commercial HVAC and mechanical services company serving businesses throughout the Phoenix metropolitan area and across Arizona. We specialize in reliable, high-quality HVAC service, maintenance, and repair for commercial facilities, with a strong focus on professionalism, safety, and long-term system performance. Our team is built around experienced technicians, modern tools, and proven processes that allow us to respond efficiently and deliver consistent results. At Agave Mechanical, we believe that taking care of our people is just as important as taking care of our customers, because great service starts with a well-supported team. We are committed to building long-term partnerships with our clients and long-term careers for our employees by providing steady work, ongoing training, and opportunities for growth within the company. Company Description Agave Mechanical is a locally owned and operated commercial HVAC and mechanical services company serving businesses throughout the Phoenix metropolitan area and across Arizona. We specialize in reliable, high-quality HVAC service, maintenance, and repair for commercial facilities, with a strong focus on professionalism, safety, and long-term system performance. Our team is built around experienced technicians, modern tools, and proven processes that allow us to respond efficiently and deliver consistent results. At Agave Mechanical, we believe that taking care of our people is just as important as taking care of our customers, because great service starts with a well-supported team. We are committed to building long-term partnerships with our clients and long-term careers for our employees by providing steady work, ongoing training, and opportunities for growth within the company.
06/24/2026
Full time
Job Description Job Description Agave Mechanical Phoenix Metropolitan Area Agave Mechanical is hiring a skilled Commercial HVAC Foreman/Installer to join our growing installation team in Phoenix, Arizona. We are a locally owned and operated commercial HVAC company serving customers throughout the Phoenix metro area, focused on quality installations, safety, and long-term system performance. This role is ideal for a highly experienced Commercial HVAC Journeyman Installer looking for steady year-round work, competitive pay, and growth opportunities within a professional, well-supported team. Position Overview Agave Mechanical is seeking a dynamic and experienced Commercial HVAC Journeyman Installer to join our growing team. In this key leadership role, you will oversee and execute commercial HVAC installation projects from start to finish while remaining hands-on in the field. Your expertise will ensure projects are completed safely, efficiently, and to the highest quality standards. This position is ideal for a skilled commercial installer ready to take on leadership responsibilities, mentor team members, and collaborate closely with project managers and contractors in a fast-paced environment. Compensation $35.00 - $50.00 per hour, Depending on Experience Weekly payroll Benefits & Perks Paid time off (PTO) Paid holidays Paid sick time Health insurance Yearly bonus plan Year-round work in the Phoenix market Company-provided take-home service vehicle Company-provided smartphone or virtual phone and fuel card Company-provided large service tools and specialty tools Ongoing HVAC training and professional development Annual performance evaluations Strong opportunity for advancement within the companyKey Responsibilities Lead and manage commercial HVAC installation projects from start to completion Install and oversee installation of rooftop units, ductwork, and complete HVAC systems Read, interpret, and execute work from blueprints, schematics, and project specifications Accurately measure, fabricate, and install sheet metal components Coordinate daily job site activities and assign tasks to installation team members Collaborate closely with project managers, contractors, and other trades Ensure installations meet company standards, manufacturer requirements, and local codes Conduct system testing, commissioning, and final inspections Perform troubleshooting, repair, and adjustments as needed during installation Enforce safety protocols and maintain a safe, organized job site Provide guidance and mentorship to journeyman and apprentice installers Communicate job progress, material needs, and scheduling updates to management Maintain accurate documentation of installation processes and job completion Required Qualifications 5+ years of commercial HVAC installation experience Prior leadership, foreman, or lead installer experience required Strong ability to read and interpret blueprints, schematics, and specifications Extensive experience with commercial HVAC systems, ductwork, and mechanical components Knowledge of HVAC-related plumbing connections and system layouts Working knowledge of air conditioning and mechanical systems Experience using diagnostic tools and performing equipment troubleshooting Strong communication, organizational, and leadership skills Ability to work independently while leading a team effectively Commitment to safety, quality workmanship, and professionalism Valid driver's license and ability to supervise commercial job sites Why Work at Agave Mechanical? Agave Mechanical offers consistent work, strong leadership, and a professional environment where installers are supported with the tools, training, and structure needed to succeed. If you're a commercial HVAC installer in Arizona looking to grow your career, we'd like to hear from you. Company Description Agave Mechanical is a locally owned and operated commercial HVAC and mechanical services company serving businesses throughout the Phoenix metropolitan area and across Arizona. We specialize in reliable, high-quality HVAC service, maintenance, and repair for commercial facilities, with a strong focus on professionalism, safety, and long-term system performance. Our team is built around experienced technicians, modern tools, and proven processes that allow us to respond efficiently and deliver consistent results. At Agave Mechanical, we believe that taking care of our people is just as important as taking care of our customers, because great service starts with a well-supported team. We are committed to building long-term partnerships with our clients and long-term careers for our employees by providing steady work, ongoing training, and opportunities for growth within the company. Company Description Agave Mechanical is a locally owned and operated commercial HVAC and mechanical services company serving businesses throughout the Phoenix metropolitan area and across Arizona. We specialize in reliable, high-quality HVAC service, maintenance, and repair for commercial facilities, with a strong focus on professionalism, safety, and long-term system performance. Our team is built around experienced technicians, modern tools, and proven processes that allow us to respond efficiently and deliver consistent results. At Agave Mechanical, we believe that taking care of our people is just as important as taking care of our customers, because great service starts with a well-supported team. We are committed to building long-term partnerships with our clients and long-term careers for our employees by providing steady work, ongoing training, and opportunities for growth within the company.
Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform. HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs. Our goal is to make technology accessible to everyone and it all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobs they accept based on their skill sets and other personal factors. Why Become a Technician? Set Your Own Schedule - Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-set Get Paid Weekly - Techs average $100+ per job. Add skills to your profile to increase your weekly earnings Join the Community - Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of help with their various technology devices and systems. You will be able to select from a range of jobs such as: TV Mounting Computer/Printer/Networking Support Home Theater Installation Smart Home Installation In-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and security Great attitude and enjoy helping people! Car/transportation required Must be at least 18 years of age In a HelloTech Home, Technology Just Works
06/24/2026
Full time
Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform. HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs. Our goal is to make technology accessible to everyone and it all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobs they accept based on their skill sets and other personal factors. Why Become a Technician? Set Your Own Schedule - Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-set Get Paid Weekly - Techs average $100+ per job. Add skills to your profile to increase your weekly earnings Join the Community - Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of help with their various technology devices and systems. You will be able to select from a range of jobs such as: TV Mounting Computer/Printer/Networking Support Home Theater Installation Smart Home Installation In-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and security Great attitude and enjoy helping people! Car/transportation required Must be at least 18 years of age In a HelloTech Home, Technology Just Works
Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform. HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs. Our goal is to make technology accessible to everyone and it all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobs they accept based on their skill sets and other personal factors. Why Become a Technician? Set Your Own Schedule - Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-set Get Paid Weekly - Techs average $100+ per job. Add skills to your profile to increase your weekly earnings Join the Community - Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of help with their various technology devices and systems. You will be able to select from a range of jobs such as: TV Mounting Computer/Printer/Networking Support Home Theater Installation Smart Home Installation In-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and security Great attitude and enjoy helping people! Car/transportation required Must be at least 18 years of age In a HelloTech Home, Technology Just Works
06/24/2026
Full time
Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform. HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs. Our goal is to make technology accessible to everyone and it all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobs they accept based on their skill sets and other personal factors. Why Become a Technician? Set Your Own Schedule - Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-set Get Paid Weekly - Techs average $100+ per job. Add skills to your profile to increase your weekly earnings Join the Community - Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of help with their various technology devices and systems. You will be able to select from a range of jobs such as: TV Mounting Computer/Printer/Networking Support Home Theater Installation Smart Home Installation In-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and security Great attitude and enjoy helping people! Car/transportation required Must be at least 18 years of age In a HelloTech Home, Technology Just Works
Join our Best-One team - now hiring a Automotive Lube Technician at our Breese location. Who We Are: Over the past 77 years, what started out as a single bay service station has grown into a respected tire and service company with over 285 locations in over 35 states - one of the largest independent tire companies in North America. At Best-One, we strive to be the leading the most trusted provider of tires and service in all of our markets with a mission for creating raving fans. And we know our success starts with our team members - our internal ravings fans. We're looking for an Automotive Lube Technician who places an emphasis on creating results for teammates, customers, and the company. Full-time: Up to $20/hr depending on experience What you get: Top Pay - the more you know, the more you earn Paid holidays & vacations; closed most major holidays Home on the weekends Health/dental/vision insurance 401(K) Team member discount program Continuing education/training Uniform Program and being a part of a company that offers a career, not just a job! What will you be doing as an Automotive Lube Technician? Mounting/dismounting, installation and inspection of auto and light truck tires Tire repair and wheel balancing Tire rotations Oil Changes Routine Maintenance Brake inspections PM services Loading/unloading and storage of products What boxes do you have to check in order to join our team? Valid driver's license required High school diploma or equivalent 1 year experience with vehicle repairs (not necessary, but preferred) Positive attitude and the ability to relate well with other employees and customers. Experience in passenger/light truck install & maintenance, oil changes, tire repair, minor auto repair, etc. Ability to perform all job functions that require lifting and or carrying single items weighing at least 50 lbs., as well as functions and activities such as pulling, pushing, bending, standing, lifting, reaching, and stooping, kneeling, crouching, or crawling. Compensation details: 20-20 Hourly Wage PIe457715dcd27-2034
06/24/2026
Full time
Join our Best-One team - now hiring a Automotive Lube Technician at our Breese location. Who We Are: Over the past 77 years, what started out as a single bay service station has grown into a respected tire and service company with over 285 locations in over 35 states - one of the largest independent tire companies in North America. At Best-One, we strive to be the leading the most trusted provider of tires and service in all of our markets with a mission for creating raving fans. And we know our success starts with our team members - our internal ravings fans. We're looking for an Automotive Lube Technician who places an emphasis on creating results for teammates, customers, and the company. Full-time: Up to $20/hr depending on experience What you get: Top Pay - the more you know, the more you earn Paid holidays & vacations; closed most major holidays Home on the weekends Health/dental/vision insurance 401(K) Team member discount program Continuing education/training Uniform Program and being a part of a company that offers a career, not just a job! What will you be doing as an Automotive Lube Technician? Mounting/dismounting, installation and inspection of auto and light truck tires Tire repair and wheel balancing Tire rotations Oil Changes Routine Maintenance Brake inspections PM services Loading/unloading and storage of products What boxes do you have to check in order to join our team? Valid driver's license required High school diploma or equivalent 1 year experience with vehicle repairs (not necessary, but preferred) Positive attitude and the ability to relate well with other employees and customers. Experience in passenger/light truck install & maintenance, oil changes, tire repair, minor auto repair, etc. Ability to perform all job functions that require lifting and or carrying single items weighing at least 50 lbs., as well as functions and activities such as pulling, pushing, bending, standing, lifting, reaching, and stooping, kneeling, crouching, or crawling. Compensation details: 20-20 Hourly Wage PIe457715dcd27-2034
Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform. HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs. Our goal is to make technology accessible to everyone and it all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobs they accept based on their skill sets and other personal factors. Why Become a Technician? Set Your Own Schedule - Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-set Get Paid Weekly - Techs average $100+ per job. Add skills to your profile to increase your weekly earnings Join the Community - Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of help with their various technology devices and systems. You will be able to select from a range of jobs such as: TV Mounting Computer/Printer/Networking Support Home Theater Installation Smart Home Installation In-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and security Great attitude and enjoy helping people! Car/transportation required Must be at least 18 years of age In a HelloTech Home, Technology Just Works
06/24/2026
Full time
Become a Tech Today! HelloTech is a nationwide, on-demand tech support platform. HelloTech provides affordable, same-day, on-site tech support services such as installations, setups, troubleshooting and repairs. Our goal is to make technology accessible to everyone and it all starts with you! This position is an independent contractor role. The opportunities available to technicians that choose to use our platform are matched based on your chosen availability and the demand in your area. Our independent contractor Techs are located nationwide and have the flexibility and freedom to set their own schedules and choose which jobs they accept based on their skill sets and other personal factors. Why Become a Technician? Set Your Own Schedule - Be your own boss and work whenever you want. Select the jobs that fit your schedule and skill-set Get Paid Weekly - Techs average $100+ per job. Add skills to your profile to increase your weekly earnings Join the Community - Grow your skill-set and network while bettering people's lives through tech The Role: As a Technician, you will provide on-site user support for customers in need of help with their various technology devices and systems. You will be able to select from a range of jobs such as: TV Mounting Computer/Printer/Networking Support Home Theater Installation Smart Home Installation In-Wall Cable Running Requirements: Understanding of various technology devices, including installation, set up and security Great attitude and enjoy helping people! Car/transportation required Must be at least 18 years of age In a HelloTech Home, Technology Just Works
Job Description Job Description Maintenance Manager "Chief Engineer" (Hands-On Building Engineer / Facilities Technician) Job Summary / Overview We're hiring a hands-on Maintenance Manager for a luxury condominium in Miami. This is a working leadership role - ideal for someone who enjoys being on the tools, not behind a desk. You'll personally perform and lead maintenance, repairs, and troubleshooting across HVAC, electrical, plumbing, and general building systems. The right candidate is an experienced building engineer or facility technician who takes pride in doing the work right, leading by example, and ensuring everything runs safely, efficiently, and to luxury standards. Full Job Description: About the Role: We're seeking a hands-on Maintenance Manager - a working leader who can diagnose, repair, and maintain all building systems in a luxury condominium environment. This is not a desk or purely supervisory position - we're looking for someone who thrives on solving problems, using their tools, and leading by doing. Key Responsibilities: Experience in the bidding on and the installation of impact windows Plan, manage, and coordinate between staff and management Perform and lead daily maintenance, repairs, and troubleshooting of building systems, including HVAC, plumbing, electrical, lighting, fire/life safety, and general facilities upkeep. Serve as the on-site building engineer , personally performing technical work alongside the team. Oversee preventive maintenance programs and respond quickly to resident or property issues. Manage vendors and contractors for specialized work, ensuring quality, cost control, and code compliance. Maintain full safety and regulatory compliance with local, state, and federal requirements. Proactively identify issues and execute repairs to protect assets and minimize downtime. Motivate, mentor, and lead maintenance staff - demonstrating excellence through action. Requirements: Hands-on technical experience in building or facility maintenance (not just administrative or managerial). FBC, NEC, and NFPA compliance Strong working knowledge of HVAC, electrical, plumbing, and building automation systems . Ability to read schematics, use diagnostic tools, and perform repairs independently. Excellent organizational, problem-solving, and communication skills. Experience in condos, hotels, or luxury residential properties strongly preferred. EPA, HVAC, or other technical certifications are a plus. Why You'll Love This Role: Be the go-to expert keeping a luxury property running at its best. Work with a professional, supportive team that values skill, reliability, and pride in craftsmanship. Competitive compensation and the opportunity to make a visible, daily impact. Salary and Benefits: $ 105,000 - $ 115,000 Comprehensive health, dental, and vision insurance Retirement 401K with employer match Paid time off and holidays Professional development opportunities Keyword Metadata Block (for SEO & search discoverability): hands-on maintenance manager, building engineer, facilities technician, property maintenance, HVAC technician, maintenance supervisor, facility operations, condo maintenance, luxury property maintenance, chief engineer, building maintenance, preventive maintenance, hotel maintenance, Miami maintenance jobs Company Description "Beautiful Bayside Resort Community with 216 units, Unified Board of Directors with a Continuous Improvement Mind Set, Self -Managed with an Excellent Association Financial plan including Full reserves, Efficient and Effective Executive Leadership" Company Description "Beautiful Bayside Resort Community with 216 units, Unified Board of Directors with a Continuous Improvement Mind Set, Self -Managed with an Excellent Association Financial plan including Full reserves, Efficient and Effective Executive Leadership"
06/24/2026
Full time
Job Description Job Description Maintenance Manager "Chief Engineer" (Hands-On Building Engineer / Facilities Technician) Job Summary / Overview We're hiring a hands-on Maintenance Manager for a luxury condominium in Miami. This is a working leadership role - ideal for someone who enjoys being on the tools, not behind a desk. You'll personally perform and lead maintenance, repairs, and troubleshooting across HVAC, electrical, plumbing, and general building systems. The right candidate is an experienced building engineer or facility technician who takes pride in doing the work right, leading by example, and ensuring everything runs safely, efficiently, and to luxury standards. Full Job Description: About the Role: We're seeking a hands-on Maintenance Manager - a working leader who can diagnose, repair, and maintain all building systems in a luxury condominium environment. This is not a desk or purely supervisory position - we're looking for someone who thrives on solving problems, using their tools, and leading by doing. Key Responsibilities: Experience in the bidding on and the installation of impact windows Plan, manage, and coordinate between staff and management Perform and lead daily maintenance, repairs, and troubleshooting of building systems, including HVAC, plumbing, electrical, lighting, fire/life safety, and general facilities upkeep. Serve as the on-site building engineer , personally performing technical work alongside the team. Oversee preventive maintenance programs and respond quickly to resident or property issues. Manage vendors and contractors for specialized work, ensuring quality, cost control, and code compliance. Maintain full safety and regulatory compliance with local, state, and federal requirements. Proactively identify issues and execute repairs to protect assets and minimize downtime. Motivate, mentor, and lead maintenance staff - demonstrating excellence through action. Requirements: Hands-on technical experience in building or facility maintenance (not just administrative or managerial). FBC, NEC, and NFPA compliance Strong working knowledge of HVAC, electrical, plumbing, and building automation systems . Ability to read schematics, use diagnostic tools, and perform repairs independently. Excellent organizational, problem-solving, and communication skills. Experience in condos, hotels, or luxury residential properties strongly preferred. EPA, HVAC, or other technical certifications are a plus. Why You'll Love This Role: Be the go-to expert keeping a luxury property running at its best. Work with a professional, supportive team that values skill, reliability, and pride in craftsmanship. Competitive compensation and the opportunity to make a visible, daily impact. Salary and Benefits: $ 105,000 - $ 115,000 Comprehensive health, dental, and vision insurance Retirement 401K with employer match Paid time off and holidays Professional development opportunities Keyword Metadata Block (for SEO & search discoverability): hands-on maintenance manager, building engineer, facilities technician, property maintenance, HVAC technician, maintenance supervisor, facility operations, condo maintenance, luxury property maintenance, chief engineer, building maintenance, preventive maintenance, hotel maintenance, Miami maintenance jobs Company Description "Beautiful Bayside Resort Community with 216 units, Unified Board of Directors with a Continuous Improvement Mind Set, Self -Managed with an Excellent Association Financial plan including Full reserves, Efficient and Effective Executive Leadership" Company Description "Beautiful Bayside Resort Community with 216 units, Unified Board of Directors with a Continuous Improvement Mind Set, Self -Managed with an Excellent Association Financial plan including Full reserves, Efficient and Effective Executive Leadership"
Astound is a leading provider of internet, WiFi, mobile, and TV services, dedicated to connecting communities and empowering lives through innovative technology. We also keep businesses connected with dependable fiber infrastructure and internet solutions backed by award-winning service, helping organizations thrive in an increasingly connected world. At the forefront of digital transformation, we continuously evolve our offerings to meet the dynamic needs of our customers-delivering reliable connectivity and groundbreaking digital experiences. Our commitment to excellence extends beyond infrastructure. We invest in our people through personalized training, coaching, and a supportive work environment that fosters growth and opportunity. Employees are empowered to represent a superior telecommunications company while making a meaningful impact in the communities we serve. We offer a robust benefits package that includes rewards, recognition programs, and employee discounts-ensuring our team members are supported in both their professional and personal journeys. At Astound, we believe in creating astounding possibilities for everyone, everywhere. A Day in the Life of the The Technical Solutions Trainer is responsible for delivering high-quality training programs that prepare employees to excel in customer interactions, sales performance, installation procedures, and trouble-call resolution while meeting safety compliance expectations. This role supports both front-line customer service teams and field technicians, ensuring they have the knowledge, skills, and confidence to provide exceptional service and technical support to our customers. The trainer will develop curriculum, lead classroom and hands-on training, evaluate trainee performance, and collaborate with operational leaders to ensure training aligns with business goals and industry standards. Conduct engaging training sessions for new and existing employees in sales, customer service, installation, and trouble-call processes. Deliver hands-on technical training for new-hire field technicians, including equipment setup, cable installation, troubleshooting, service restoration, and Safety. Facilitate role-play, simulations, and scenario-based exercises to strengthen customer communication, problem-solving, and sales skills. Train employees in effective sales techniques, product knowledge, and value-based customer conversations. Provide coaching, feedback, and performance assessments throughout the training cycle. Support teams in achieving sales goals, customer-satisfaction targets, and first-call resolution metrics. Develop, update, and maintain training materials, job aids, manuals, and e-learning content for both customer service and technical operations in partnership with the internal curriculum design team. Ensure training content reflects current products, services, installation standards, troubleshooting procedures, and customer-experience expectations. Collaborate with subject-matter experts to incorporate new technologies, tools, and service offerings into training programs. Train new-hire technicians on installation best practices, safety procedures, equipment configuration, and diagnostic tools. Teach troubleshooting workflows for common service issues, including connectivity, equipment failures, and signal quality problems. Demonstrate proper use of meters, handheld devices, and company-approved installation tools. Reinforce quality-control standards and documentation requirements for field operations. Teach customer-service fundamentals including empathy, de-escalation, active listening, and issue-resolution strategies. Reinforce company policies, compliance requirements, and customer-experience standards. Monitor trainee progress and provide timely coaching to support skill development. Evaluate training effectiveness through assessments, performance metrics, and feedback surveys. Recommend improvements to training programs based on operational needs, customer feedback, and emerging trends. Maintain accurate training records, attendance logs, and certification documentation. Serve as a resource for teams requiring refresher training or targeted skill development. Ensure all training programs incorporate field safety best practices, including proper use of personal protective equipment (PPE), safe work habits, and adherence to company and regulatory safety standards. Train technicians on ladder safety, including inspection procedures, proper setup and stabilization, three-point contact, fall-prevention techniques, and safe climbing practices. Provide instruction on bucket truck safety, including pre-trip inspections, safe operation, emergency procedures, and compliance with equipment-specific manufacturer guidelines. Maintain current American Red Cross certification (or equivalent) in First Aid/CPR/AED and integrate emergency-response awareness into technician training modules. Educate employees on OSHA compliance requirements, including hazard recognition, electrical safety, confined-space awareness, ergonomics, and safe handling of tools and equipment. Reinforce company safety policies, field-operations protocols, and reporting procedures for incidents, near-misses, and unsafe conditions. Conduct periodic safety refreshers, toolbox talks, and hands-on demonstrations to ensure ongoing compliance and promote safety culture. Collaborate with Safety, Field Operations, and Compliance teams to ensure training materials reflect current regulations, updated standards, and evolving industry best practices. Other duties as assigned. What You Bring to the Table: 5+ years of Technical Installation and Troubleshooting Experience, or an equivalent combination of education and experience. 2 + years of facilitation , leadership and successful sales experience a plus. Candidate must be proficient in RF theory, Digital Theory, RF Design, Fiber Optics related to plant, IP networking basics and telephony, electricity, electronics, safety compliance or other related industry experience preferred. Experience training, coaching, or mentoring in a customer service, sales and technical operations environment. Strong knowledge of telecommunications products and services preferred. Excellent communication, presentation, listening and interpersonal skills. Ability to simplify complex technical concepts for diverse audiences. Strong organizational skills with the ability to manage multiple training classes and deadlines. Successful facilitation in a classroom, virtual and field based training environments. Instructional design knowledge and skills including adult learning theory, job/task analysis, course and curriculum development, and evaluation. Flexibility to travel within the designated market and occasional travel to other company locations to include out-of-state travel. Valid Driver's license with driving record within the company's requirements. Education: High school diploma or equivalent required We're Proud to Offer a Comprehensive Benefits Package Including: 401k retirement plan, with employer match Insurance options including: medical, dental, vision, life and STD insurance Paid Time Off/Vacation: Starting at 80 hours per year, and increases based on tenure with the organization Floating Holiday: 40 hours per year Paid Holidays: 7 days per year Paid Sick Leave: Astound allows a number of paid sick hours per calendar year and varies based on state and/or local laws Tuition reimbursement program Employee discount program Benefits listed above are for regular full-time position Base Compensation: The base compensation range for this position is $65,000 - $92,000 plus opportunities for benefits. The base pay range represents the low and high end of the hiring range for this job. Actual pay will vary and may be above or below the range based on various factors including but not limited to location, relevant skills, experience, and capabilities. Our Mission Statement: Take care of our customers Take care of each other Do what we say we are going to do Have fun Astound is proud to be an Equal Opportunity Employer, and we are dedicated to cultivating an inclusive workplace where employees feel valued, respected, and empowered. Discrimination of any kind has no place here. We are committed to providing equal opportunities for all employees and applicants, regardless of race, color, religion, sex, gender, pregnancy, childbirth and related conditions, national origin, age, physical and mental disability, marital status, sexual orientation, genetic information, military or veteran status, citizenship, or other status or characteristic protected by applicable law. We strive to create a culture that celebrates our differences and promotes fairness and inclusivity in all aspects of our business. FCO (For San Francisco Candidates only): Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. CCPA Employee Privacy Policy (For California Candidates Only): . click apply for full job details
06/24/2026
Full time
Astound is a leading provider of internet, WiFi, mobile, and TV services, dedicated to connecting communities and empowering lives through innovative technology. We also keep businesses connected with dependable fiber infrastructure and internet solutions backed by award-winning service, helping organizations thrive in an increasingly connected world. At the forefront of digital transformation, we continuously evolve our offerings to meet the dynamic needs of our customers-delivering reliable connectivity and groundbreaking digital experiences. Our commitment to excellence extends beyond infrastructure. We invest in our people through personalized training, coaching, and a supportive work environment that fosters growth and opportunity. Employees are empowered to represent a superior telecommunications company while making a meaningful impact in the communities we serve. We offer a robust benefits package that includes rewards, recognition programs, and employee discounts-ensuring our team members are supported in both their professional and personal journeys. At Astound, we believe in creating astounding possibilities for everyone, everywhere. A Day in the Life of the The Technical Solutions Trainer is responsible for delivering high-quality training programs that prepare employees to excel in customer interactions, sales performance, installation procedures, and trouble-call resolution while meeting safety compliance expectations. This role supports both front-line customer service teams and field technicians, ensuring they have the knowledge, skills, and confidence to provide exceptional service and technical support to our customers. The trainer will develop curriculum, lead classroom and hands-on training, evaluate trainee performance, and collaborate with operational leaders to ensure training aligns with business goals and industry standards. Conduct engaging training sessions for new and existing employees in sales, customer service, installation, and trouble-call processes. Deliver hands-on technical training for new-hire field technicians, including equipment setup, cable installation, troubleshooting, service restoration, and Safety. Facilitate role-play, simulations, and scenario-based exercises to strengthen customer communication, problem-solving, and sales skills. Train employees in effective sales techniques, product knowledge, and value-based customer conversations. Provide coaching, feedback, and performance assessments throughout the training cycle. Support teams in achieving sales goals, customer-satisfaction targets, and first-call resolution metrics. Develop, update, and maintain training materials, job aids, manuals, and e-learning content for both customer service and technical operations in partnership with the internal curriculum design team. Ensure training content reflects current products, services, installation standards, troubleshooting procedures, and customer-experience expectations. Collaborate with subject-matter experts to incorporate new technologies, tools, and service offerings into training programs. Train new-hire technicians on installation best practices, safety procedures, equipment configuration, and diagnostic tools. Teach troubleshooting workflows for common service issues, including connectivity, equipment failures, and signal quality problems. Demonstrate proper use of meters, handheld devices, and company-approved installation tools. Reinforce quality-control standards and documentation requirements for field operations. Teach customer-service fundamentals including empathy, de-escalation, active listening, and issue-resolution strategies. Reinforce company policies, compliance requirements, and customer-experience standards. Monitor trainee progress and provide timely coaching to support skill development. Evaluate training effectiveness through assessments, performance metrics, and feedback surveys. Recommend improvements to training programs based on operational needs, customer feedback, and emerging trends. Maintain accurate training records, attendance logs, and certification documentation. Serve as a resource for teams requiring refresher training or targeted skill development. Ensure all training programs incorporate field safety best practices, including proper use of personal protective equipment (PPE), safe work habits, and adherence to company and regulatory safety standards. Train technicians on ladder safety, including inspection procedures, proper setup and stabilization, three-point contact, fall-prevention techniques, and safe climbing practices. Provide instruction on bucket truck safety, including pre-trip inspections, safe operation, emergency procedures, and compliance with equipment-specific manufacturer guidelines. Maintain current American Red Cross certification (or equivalent) in First Aid/CPR/AED and integrate emergency-response awareness into technician training modules. Educate employees on OSHA compliance requirements, including hazard recognition, electrical safety, confined-space awareness, ergonomics, and safe handling of tools and equipment. Reinforce company safety policies, field-operations protocols, and reporting procedures for incidents, near-misses, and unsafe conditions. Conduct periodic safety refreshers, toolbox talks, and hands-on demonstrations to ensure ongoing compliance and promote safety culture. Collaborate with Safety, Field Operations, and Compliance teams to ensure training materials reflect current regulations, updated standards, and evolving industry best practices. Other duties as assigned. What You Bring to the Table: 5+ years of Technical Installation and Troubleshooting Experience, or an equivalent combination of education and experience. 2 + years of facilitation , leadership and successful sales experience a plus. Candidate must be proficient in RF theory, Digital Theory, RF Design, Fiber Optics related to plant, IP networking basics and telephony, electricity, electronics, safety compliance or other related industry experience preferred. Experience training, coaching, or mentoring in a customer service, sales and technical operations environment. Strong knowledge of telecommunications products and services preferred. Excellent communication, presentation, listening and interpersonal skills. Ability to simplify complex technical concepts for diverse audiences. Strong organizational skills with the ability to manage multiple training classes and deadlines. Successful facilitation in a classroom, virtual and field based training environments. Instructional design knowledge and skills including adult learning theory, job/task analysis, course and curriculum development, and evaluation. Flexibility to travel within the designated market and occasional travel to other company locations to include out-of-state travel. Valid Driver's license with driving record within the company's requirements. Education: High school diploma or equivalent required We're Proud to Offer a Comprehensive Benefits Package Including: 401k retirement plan, with employer match Insurance options including: medical, dental, vision, life and STD insurance Paid Time Off/Vacation: Starting at 80 hours per year, and increases based on tenure with the organization Floating Holiday: 40 hours per year Paid Holidays: 7 days per year Paid Sick Leave: Astound allows a number of paid sick hours per calendar year and varies based on state and/or local laws Tuition reimbursement program Employee discount program Benefits listed above are for regular full-time position Base Compensation: The base compensation range for this position is $65,000 - $92,000 plus opportunities for benefits. The base pay range represents the low and high end of the hiring range for this job. Actual pay will vary and may be above or below the range based on various factors including but not limited to location, relevant skills, experience, and capabilities. Our Mission Statement: Take care of our customers Take care of each other Do what we say we are going to do Have fun Astound is proud to be an Equal Opportunity Employer, and we are dedicated to cultivating an inclusive workplace where employees feel valued, respected, and empowered. Discrimination of any kind has no place here. We are committed to providing equal opportunities for all employees and applicants, regardless of race, color, religion, sex, gender, pregnancy, childbirth and related conditions, national origin, age, physical and mental disability, marital status, sexual orientation, genetic information, military or veteran status, citizenship, or other status or characteristic protected by applicable law. We strive to create a culture that celebrates our differences and promotes fairness and inclusivity in all aspects of our business. FCO (For San Francisco Candidates only): Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. CCPA Employee Privacy Policy (For California Candidates Only): . click apply for full job details
US AMR-Jones Lang LaSalle Americas, Inc.
Colorado City, Texas
JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. What this job involves - The Lead Engineer - Critical Environments supervises and directs operating engineers in installation, repair, and maintenance of all base building and critical system machinery and equipment. Responsible for supervising the operating team on their shift. Assumes the Chief Engineers responsibilities if the Chief Engineer is not on site. Shift: Night shift What is your day to day? Supervise and direct maintenance staff while overseeing all building systems operations including HVAC, electrical, plumbing, fire/life safety, and emergency backup systems. Perform preventative maintenance scheduling, equipment troubleshooting, and coordinate contracted work to ensure minimal disruption to building services. Train maintenance team members in proper procedures, safety protocols, and equipment operation to expand their capabilities and maintain professional standards. Manage inventory of tools and supplies, prepare purchase orders, and maintain accurate engineering logs and documentation. Monitor equipment performance, analyze system operations, diagnose problems, and implement corrective actions to achieve 100% uptime goals. Ensure compliance with safety protocols for hazardous materials, Critical Facility Work Authorization processes, and emergency escalation procedures. Assist Chief Engineer with KPI implementation while overseeing contractor activities and protecting client asset value. Perform additional job duties as required. Required Qualifications Must have hands-on experience in a data center/critical facility, including UPS Systems, emergency generators, and switch-gear High School diploma or GED equivalent 5+ years related work experience, including supervisory experience Operating Engineers license (SMA) or equivalent Certification as a Universal Technician for CFC's (or within 90 days of employment) Preferred Qualifications Corrigo, MCIM / Salesforce, Zendesk or Service Now Experience. Universal EPA 608 certification Trained in NFPA70E Physical Work Abilities & Requirements: This position requires frequent walking, climbing, bending, kneeling, lifting, stooping, and working/extending overhead, including: Walking large, campus-like settings. Lifting a minimum of 50 lbs. Climbing stairs and navigating rooftops to access equipment. Using ladders up to 30 ft and working from heights. Ability to Climb a ladder with a 300-lb weight limit. Must be able to work different schedules. Must be able to work Holidays. Must be able to respond to site emergencies. This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without sponsorship. Location: On-site -Colorado City, TX If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement . For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here . Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.
06/24/2026
Full time
JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. What this job involves - The Lead Engineer - Critical Environments supervises and directs operating engineers in installation, repair, and maintenance of all base building and critical system machinery and equipment. Responsible for supervising the operating team on their shift. Assumes the Chief Engineers responsibilities if the Chief Engineer is not on site. Shift: Night shift What is your day to day? Supervise and direct maintenance staff while overseeing all building systems operations including HVAC, electrical, plumbing, fire/life safety, and emergency backup systems. Perform preventative maintenance scheduling, equipment troubleshooting, and coordinate contracted work to ensure minimal disruption to building services. Train maintenance team members in proper procedures, safety protocols, and equipment operation to expand their capabilities and maintain professional standards. Manage inventory of tools and supplies, prepare purchase orders, and maintain accurate engineering logs and documentation. Monitor equipment performance, analyze system operations, diagnose problems, and implement corrective actions to achieve 100% uptime goals. Ensure compliance with safety protocols for hazardous materials, Critical Facility Work Authorization processes, and emergency escalation procedures. Assist Chief Engineer with KPI implementation while overseeing contractor activities and protecting client asset value. Perform additional job duties as required. Required Qualifications Must have hands-on experience in a data center/critical facility, including UPS Systems, emergency generators, and switch-gear High School diploma or GED equivalent 5+ years related work experience, including supervisory experience Operating Engineers license (SMA) or equivalent Certification as a Universal Technician for CFC's (or within 90 days of employment) Preferred Qualifications Corrigo, MCIM / Salesforce, Zendesk or Service Now Experience. Universal EPA 608 certification Trained in NFPA70E Physical Work Abilities & Requirements: This position requires frequent walking, climbing, bending, kneeling, lifting, stooping, and working/extending overhead, including: Walking large, campus-like settings. Lifting a minimum of 50 lbs. Climbing stairs and navigating rooftops to access equipment. Using ladders up to 30 ft and working from heights. Ability to Climb a ladder with a 300-lb weight limit. Must be able to work different schedules. Must be able to work Holidays. Must be able to respond to site emergencies. This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without sponsorship. Location: On-site -Colorado City, TX If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement . For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here . Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.
What you will do As a Reliability Engineer you will review and participate in capital projects to ensure total cost of ownership is considered, Own and optimize the preventive and predictive maintenance processes and systematically identify and eliminate production losses and asset failures through Risk Based Asset Management and Life Cycle Asset Management (LCAM). You will lead efforts to ensure reliability and maintainability of equipment, processes, utilities, facilities, controls, and safety/security systems. Professionally and systematically defines, designs, develops, monitors and refines an Asset Maintenance Plan that includes Value-added preventive maintenance tasks and Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems Applies value analysis to repair/replace, repair/redesign, and make/buy decisions The usage of MFMEA at the plants. How you will do it Reduce assets reliability risks for new projects and existing assets Elaborate and validate Master Routines per technology (MR) including Plant's feedback supported by SME's Standardization of Master Routines Master Routines long term Governance Preventive Maintenance routines optimization Supports MFMEA and root cause analysis Liaison between Technology SME's and Plant Maintenance Engineers Spare parts optimization Provides engineering maintenance support to the Plants. Executes PdM master plan in the plants Provides training to PdM Technicians Participates in the development of design and installation specifications along with commissioning plans Participates in the development of criteria for and evaluation of equipment and technical MRO suppliers and technical maintenance service providers. Participates in the final check out of new installations. This includes factory and site acceptance testing that will assure adherence to functional specifications. What we look for Bachelor's degree in Engineering required Mechanical/Electrical Engineering degree or similar discipline preferred 5 + years of experience in a maintenance engineering role required. 5+ years of experience working with reliability engineering-related processes required. Certified Maintenance and Reliability Professional desired Must have an understanding of Lean, Six Sigma, and TPM. Lean-Six Sigma Black belt certification desired Must fully domain the Reliability Centered Maintenance (RCM) process, Asset Management & condition monitoring principles, tools and application Expertise in all areas of maintenance and reliability, material management, planning and scheduling, and/or CMMS / EAM / ERP optimization is desired Proficient on Popular CMMS solutions like Maximo 7.6, SAP Maintenance & Prisma Should have good oral/written communication skills and possess tact. Able to talk in public and teach large groups Requires 30% travel What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, and Employee Assistance Program Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2025's Most Ethical Companies by Ethisphere. This prestigious recognition marks the third consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. Equal Employment Opportunity: We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing . We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report . We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To All Recruitment Agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.
06/24/2026
Full time
What you will do As a Reliability Engineer you will review and participate in capital projects to ensure total cost of ownership is considered, Own and optimize the preventive and predictive maintenance processes and systematically identify and eliminate production losses and asset failures through Risk Based Asset Management and Life Cycle Asset Management (LCAM). You will lead efforts to ensure reliability and maintainability of equipment, processes, utilities, facilities, controls, and safety/security systems. Professionally and systematically defines, designs, develops, monitors and refines an Asset Maintenance Plan that includes Value-added preventive maintenance tasks and Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems Applies value analysis to repair/replace, repair/redesign, and make/buy decisions The usage of MFMEA at the plants. How you will do it Reduce assets reliability risks for new projects and existing assets Elaborate and validate Master Routines per technology (MR) including Plant's feedback supported by SME's Standardization of Master Routines Master Routines long term Governance Preventive Maintenance routines optimization Supports MFMEA and root cause analysis Liaison between Technology SME's and Plant Maintenance Engineers Spare parts optimization Provides engineering maintenance support to the Plants. Executes PdM master plan in the plants Provides training to PdM Technicians Participates in the development of design and installation specifications along with commissioning plans Participates in the development of criteria for and evaluation of equipment and technical MRO suppliers and technical maintenance service providers. Participates in the final check out of new installations. This includes factory and site acceptance testing that will assure adherence to functional specifications. What we look for Bachelor's degree in Engineering required Mechanical/Electrical Engineering degree or similar discipline preferred 5 + years of experience in a maintenance engineering role required. 5+ years of experience working with reliability engineering-related processes required. Certified Maintenance and Reliability Professional desired Must have an understanding of Lean, Six Sigma, and TPM. Lean-Six Sigma Black belt certification desired Must fully domain the Reliability Centered Maintenance (RCM) process, Asset Management & condition monitoring principles, tools and application Expertise in all areas of maintenance and reliability, material management, planning and scheduling, and/or CMMS / EAM / ERP optimization is desired Proficient on Popular CMMS solutions like Maximo 7.6, SAP Maintenance & Prisma Should have good oral/written communication skills and possess tact. Able to talk in public and teach large groups Requires 30% travel What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, and Employee Assistance Program Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2025's Most Ethical Companies by Ethisphere. This prestigious recognition marks the third consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. Equal Employment Opportunity: We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing . We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report . We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To All Recruitment Agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.
Relay Technician Traineelocation: PLEASANT GROVE, UT, US, 84062 Company: PacifiCorp Power Your GreatnessPacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging.General PurposeTrain to become a Relay Technician through hands-on experience, formal technical coursework, and guided mentorship under an experienced Area Relay Technician. This role builds the foundational knowledge and skills required to progress to a journeyman-level position, supporting the reliable operation of substation protection, control, and metering systems.ResponsibilitiesA Relay Technician Trainee develops a working knowledge of substation equipment and systems while assisting with the installation, maintenance, testing, calibration, troubleshooting, and repair of equipment. This includes, but is not limited to, electromechanical, solid-state, and microprocessor-based protective relays; indicating and kWh/kW metering; recording devices such as sequence of events recorders and digital fault recorders; and control systems associated with breakers, transformers, regulators, capacitors, reactors, and related substation apparatus. The role also supports remote control and monitoring systems, including SCADA. This position requires strict adherence to safety standards and company policies. Work may be performed in confined spaces, at elevated heights, and with specialized equipment such as bucket and boom trucks. The role may involve working independently or as part of a team, responding to emergency conditions, and maintaining responsibility for assigned tools, test equipment, and vehicles. What you'll be doing: Attend technician training schools to learn relay standards and theory and complete electronic courses as specified for the Relay Technician Trainee program.Assist and complete work under the direction of Relay Technicians and Area Relay Technician as outlined on the Relay Technicians' job description.Keep and assist relay technicians in keeping records and files of work performed, reports on outages and trouble, and equipment records.Under supervision, the trainee participates in diagnostic and analytical testing of substation equipment, including power factor testing, transformer turns ratio testing, insulation resistance (megger) testing, and other assigned evaluations. The trainee will also gain experience operating substation equipment, including switching and grounding activities, in accordance with safety protocols.The typical duties described herein represent a major portion of the job. Other similar duties may be assigned. When management determines that it is efficient to do so, employees in this classification may be assigned duties of less complexity.RequirementsHigh School Diploma or GED, or proof of equivalentCertification in an electrical apprenticeship program or equivalent programDemonstrated ability to manage workload and use computerized test programBasic computer skills in MS Office (Word, Excel, Access, and Internet)Candidate must have good driving recordMust be able to obtain a CDLStrong ability to follow safety polities and proceduresMust have passed relay seminar examAdditional InformationPrimary Location: PLEASANT GROVE, UTCompany code: PacifiCorp : Power DeliverySchedule: FULL TIME, 100% onsitePersonnel Subarea: IBEW Local 57Hiring Range: $58.60 BENEFITS: At PacifiCorp, we understand that living a healthy lifestyle isn't just about your physical health - your mental, financial, and social wellbeing also play an important role. That's why we offer a wide range of benefits designed to help you live a more balanced lifestyle. Our Benefits include: Medical, dental, and vision insurance401k with match fixed contributions, including a Roth and saving option. For union employees, matching contributions vary by union. For nonunion, PacifiCorp makes a fixed contribution equal to 4% of your eligible pay each year for new hires. In addition, PacifiCorp matches 100% of the first 6% you contribute. Life insuranceAdditional voluntary benefits, including pet insuranceTuition AssistanceMass Transit Pass for employees in our Portland and Salt Lake City Offices. Work Life BalanceGenerous Paid Time Off (PTO) - Time off varies by employee type (Union or Non-Union)Paid short-term disability leave and long-term disability insurancePaid Parental LeavePaid Bereavement Leave Employee Assistance Program supporting mental and emotional wellbeing For more information, please visit: Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. Nearest Major Market: Salt Lake City Career Segment: Power Systems, Electrical, Technician, Trainee, Energy, Engineering, Entry Level, Technology Compensation details: 58.6-58.6 Hourly WagePIdc3e092c147d-8449
06/23/2026
Relay Technician Traineelocation: PLEASANT GROVE, UT, US, 84062 Company: PacifiCorp Power Your GreatnessPacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging.General PurposeTrain to become a Relay Technician through hands-on experience, formal technical coursework, and guided mentorship under an experienced Area Relay Technician. This role builds the foundational knowledge and skills required to progress to a journeyman-level position, supporting the reliable operation of substation protection, control, and metering systems.ResponsibilitiesA Relay Technician Trainee develops a working knowledge of substation equipment and systems while assisting with the installation, maintenance, testing, calibration, troubleshooting, and repair of equipment. This includes, but is not limited to, electromechanical, solid-state, and microprocessor-based protective relays; indicating and kWh/kW metering; recording devices such as sequence of events recorders and digital fault recorders; and control systems associated with breakers, transformers, regulators, capacitors, reactors, and related substation apparatus. The role also supports remote control and monitoring systems, including SCADA. This position requires strict adherence to safety standards and company policies. Work may be performed in confined spaces, at elevated heights, and with specialized equipment such as bucket and boom trucks. The role may involve working independently or as part of a team, responding to emergency conditions, and maintaining responsibility for assigned tools, test equipment, and vehicles. What you'll be doing: Attend technician training schools to learn relay standards and theory and complete electronic courses as specified for the Relay Technician Trainee program.Assist and complete work under the direction of Relay Technicians and Area Relay Technician as outlined on the Relay Technicians' job description.Keep and assist relay technicians in keeping records and files of work performed, reports on outages and trouble, and equipment records.Under supervision, the trainee participates in diagnostic and analytical testing of substation equipment, including power factor testing, transformer turns ratio testing, insulation resistance (megger) testing, and other assigned evaluations. The trainee will also gain experience operating substation equipment, including switching and grounding activities, in accordance with safety protocols.The typical duties described herein represent a major portion of the job. Other similar duties may be assigned. When management determines that it is efficient to do so, employees in this classification may be assigned duties of less complexity.RequirementsHigh School Diploma or GED, or proof of equivalentCertification in an electrical apprenticeship program or equivalent programDemonstrated ability to manage workload and use computerized test programBasic computer skills in MS Office (Word, Excel, Access, and Internet)Candidate must have good driving recordMust be able to obtain a CDLStrong ability to follow safety polities and proceduresMust have passed relay seminar examAdditional InformationPrimary Location: PLEASANT GROVE, UTCompany code: PacifiCorp : Power DeliverySchedule: FULL TIME, 100% onsitePersonnel Subarea: IBEW Local 57Hiring Range: $58.60 BENEFITS: At PacifiCorp, we understand that living a healthy lifestyle isn't just about your physical health - your mental, financial, and social wellbeing also play an important role. That's why we offer a wide range of benefits designed to help you live a more balanced lifestyle. Our Benefits include: Medical, dental, and vision insurance401k with match fixed contributions, including a Roth and saving option. For union employees, matching contributions vary by union. For nonunion, PacifiCorp makes a fixed contribution equal to 4% of your eligible pay each year for new hires. In addition, PacifiCorp matches 100% of the first 6% you contribute. Life insuranceAdditional voluntary benefits, including pet insuranceTuition AssistanceMass Transit Pass for employees in our Portland and Salt Lake City Offices. Work Life BalanceGenerous Paid Time Off (PTO) - Time off varies by employee type (Union or Non-Union)Paid short-term disability leave and long-term disability insurancePaid Parental LeavePaid Bereavement Leave Employee Assistance Program supporting mental and emotional wellbeing For more information, please visit: Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. Nearest Major Market: Salt Lake City Career Segment: Power Systems, Electrical, Technician, Trainee, Energy, Engineering, Entry Level, Technology Compensation details: 58.6-58.6 Hourly WagePIdc3e092c147d-8449
Position Title: Additive Manufacturing Field Technician Description: About this opportunity: The Additive Manufacturing Field Technician provides on-site preventative and corrective maintenance service, including installation of assigned additive manufacturing equipment at customer facilities. In this role, you will support customers with equipment service needs, help ensure reliable machine performance, and provide technical assistance as needed while working both remotely and in the field. This opportunity is focused in the Atlanta, GA area , with flexibility to work from home or the office when not traveling, depending on business needs. GoEngineer is a provider of the most compelling design platforms in the industry, deploying engineering software and 3D printing technology to make the design process innovative, efficient, and intelligent. In this role, you will join a team that supports advanced manufacturing equipment in real-world customer environments and helps deliver a strong service experience across a wide geographic area. Your key contributions in this role will be: Perform installation of assigned additive manufacturing equipment for customers and support operator onboarding as needed. Provide on-site preventative and corrective maintenance to help customers keep equipment running effectively. Travel to customer locations in the Atlanta, GA region and, at times, to other locations as business needs require. Troubleshoot mechanical, electrical, and system-related equipment issues and work toward timely resolution. Build strong working relationships with customers through professional, responsive field service support. Serve as a point of contact during service events and help communicate status, issues, and next steps clearly. Collaborate with internal teams, including managers, technicians, and support resources, to resolve technical challenges. Use available manuals, internal documentation, and team knowledge-sharing tools to support effective field troubleshooting. Educate customers on Stratasys and FormLabs products and corporate initiatives. Evaluate, modify, print, and post process 3D print benchmarks based on prospect data. Participate in hands-on training, shadowing, and ongoing learning to build proficiency across supported equipment. Contribute to a service culture centered on curiosity, continuous learning, and dependable customer support. Complete all administrative responsibilities related to customer service calls, including: Service reports Expense reports Weekly time reports Tracking preventive maintenance and upgrade requirements We are looking for candidates with the below experience and skills, however, even if you do not meet all the listed requirements, very interested candidates should still apply: Prior experience in a field service , maintenance, repair, or technical support environment is preferred. Experience working with Stratasys and/or FormLabs printers is a strong plus. Experience with other 3D printers or additive manufacturing equipment is also highly valued. Transferable experience working on machinery such as CNC equipment, industrial printing equipment, automotive systems, motorcycles, or other electro-mechanical systems is welcomed. Ability to work with tools, follow technical instructions, and perform hands-on troubleshooting. Mechanical and electrical aptitude, with the ability to diagnose issues and think through repairs methodically. Strong analytical and problem-solving skills. Ability to learn technical systems, processes, and documentation in a structured way. Effective communication and customer service skills in a field-facing role. Organizational skills to manage travel, service calls, reporting, and follow-up responsibilities. Personal Attributes Required: Practical, hands-on approach and strong curiosity about how things work. Willingness to ask questions, learn quickly, and use available resources when troubleshooting. Comfort working independently in the field for much of the time. Ability to adapt to a fast-changing environment and shifting travel schedules. Willingness to travel frequently, including overnight travel, with travel levels that may be high depending on service demand. Expected travel is up to 60% Flexibility to work outside standard hours when customer needs or travel schedules require it. Ability to lift approximately 50 lbs. and safely handle parts and equipment components. Candidates should be located within reasonable proximity of the Atlanta, GA area to support office access and field coverage when needed. A strong interest in tinkering, building, repairing, or working with mechanical systems outside of work can be helpful for success in this role. Technical trade school studies or equivalent experience preferred. More about what GoEngineer offers: At GoEngineer, we understand that our value comes from our employees, and we celebrate and respect their unique experiences. We are working to build a culture where both our employees and customers are centered in the work we do, and employees feel welcomed as they are from the first day. Generous Benefits Include: • Participation in GoEngineer's PTO program from day one of employment. • 401(k) retirement plan with up to a 6% company match, 100% vested on day one. • Comprehensive medical coverage, including PPO and High Deductible plans with FSA/HSA options and employer HSA contributions. • Paid Family Leave, including paid pregnancy disability leave and paid parental bonding leave. • Employer paid Life Insurance policy, & Short Term, and Long Term Disability insurance, with optional supplemental coverage. • Dental and Vision insurance • Mental health, telemedicine with 24/7 access to medical providers, and wellness programs, including virtual therapy, nutrition counseling, and physical therapy. • Fertility, adoption, and family building benefits. • Employee Assistance Program (EAP) offering free, confidential counseling and support for mental health, legal, financial, and family needs. • Optional voluntary benefits, including accident insurance, hospital indemnity, critical illness coverage, identity theft protection, pet insurance, plus student loan repayment and prescription cost savings programs. To support a fair and efficient hiring process, we may use AI technology to summarize interviews and help our teams review information consistently. AI does not evaluate candidates or make hiring decisions. All decisions are made by our human hiring team. Department: Hardware - Technical Role: Field Service Technician Location: Suwanee RemoteStatus: Hybrid Salary: $24 - $26 Compensation details: 24-26 PI93ad9e5-
06/23/2026
Full time
Position Title: Additive Manufacturing Field Technician Description: About this opportunity: The Additive Manufacturing Field Technician provides on-site preventative and corrective maintenance service, including installation of assigned additive manufacturing equipment at customer facilities. In this role, you will support customers with equipment service needs, help ensure reliable machine performance, and provide technical assistance as needed while working both remotely and in the field. This opportunity is focused in the Atlanta, GA area , with flexibility to work from home or the office when not traveling, depending on business needs. GoEngineer is a provider of the most compelling design platforms in the industry, deploying engineering software and 3D printing technology to make the design process innovative, efficient, and intelligent. In this role, you will join a team that supports advanced manufacturing equipment in real-world customer environments and helps deliver a strong service experience across a wide geographic area. Your key contributions in this role will be: Perform installation of assigned additive manufacturing equipment for customers and support operator onboarding as needed. Provide on-site preventative and corrective maintenance to help customers keep equipment running effectively. Travel to customer locations in the Atlanta, GA region and, at times, to other locations as business needs require. Troubleshoot mechanical, electrical, and system-related equipment issues and work toward timely resolution. Build strong working relationships with customers through professional, responsive field service support. Serve as a point of contact during service events and help communicate status, issues, and next steps clearly. Collaborate with internal teams, including managers, technicians, and support resources, to resolve technical challenges. Use available manuals, internal documentation, and team knowledge-sharing tools to support effective field troubleshooting. Educate customers on Stratasys and FormLabs products and corporate initiatives. Evaluate, modify, print, and post process 3D print benchmarks based on prospect data. Participate in hands-on training, shadowing, and ongoing learning to build proficiency across supported equipment. Contribute to a service culture centered on curiosity, continuous learning, and dependable customer support. Complete all administrative responsibilities related to customer service calls, including: Service reports Expense reports Weekly time reports Tracking preventive maintenance and upgrade requirements We are looking for candidates with the below experience and skills, however, even if you do not meet all the listed requirements, very interested candidates should still apply: Prior experience in a field service , maintenance, repair, or technical support environment is preferred. Experience working with Stratasys and/or FormLabs printers is a strong plus. Experience with other 3D printers or additive manufacturing equipment is also highly valued. Transferable experience working on machinery such as CNC equipment, industrial printing equipment, automotive systems, motorcycles, or other electro-mechanical systems is welcomed. Ability to work with tools, follow technical instructions, and perform hands-on troubleshooting. Mechanical and electrical aptitude, with the ability to diagnose issues and think through repairs methodically. Strong analytical and problem-solving skills. Ability to learn technical systems, processes, and documentation in a structured way. Effective communication and customer service skills in a field-facing role. Organizational skills to manage travel, service calls, reporting, and follow-up responsibilities. Personal Attributes Required: Practical, hands-on approach and strong curiosity about how things work. Willingness to ask questions, learn quickly, and use available resources when troubleshooting. Comfort working independently in the field for much of the time. Ability to adapt to a fast-changing environment and shifting travel schedules. Willingness to travel frequently, including overnight travel, with travel levels that may be high depending on service demand. Expected travel is up to 60% Flexibility to work outside standard hours when customer needs or travel schedules require it. Ability to lift approximately 50 lbs. and safely handle parts and equipment components. Candidates should be located within reasonable proximity of the Atlanta, GA area to support office access and field coverage when needed. A strong interest in tinkering, building, repairing, or working with mechanical systems outside of work can be helpful for success in this role. Technical trade school studies or equivalent experience preferred. More about what GoEngineer offers: At GoEngineer, we understand that our value comes from our employees, and we celebrate and respect their unique experiences. We are working to build a culture where both our employees and customers are centered in the work we do, and employees feel welcomed as they are from the first day. Generous Benefits Include: • Participation in GoEngineer's PTO program from day one of employment. • 401(k) retirement plan with up to a 6% company match, 100% vested on day one. • Comprehensive medical coverage, including PPO and High Deductible plans with FSA/HSA options and employer HSA contributions. • Paid Family Leave, including paid pregnancy disability leave and paid parental bonding leave. • Employer paid Life Insurance policy, & Short Term, and Long Term Disability insurance, with optional supplemental coverage. • Dental and Vision insurance • Mental health, telemedicine with 24/7 access to medical providers, and wellness programs, including virtual therapy, nutrition counseling, and physical therapy. • Fertility, adoption, and family building benefits. • Employee Assistance Program (EAP) offering free, confidential counseling and support for mental health, legal, financial, and family needs. • Optional voluntary benefits, including accident insurance, hospital indemnity, critical illness coverage, identity theft protection, pet insurance, plus student loan repayment and prescription cost savings programs. To support a fair and efficient hiring process, we may use AI technology to summarize interviews and help our teams review information consistently. AI does not evaluate candidates or make hiring decisions. All decisions are made by our human hiring team. Department: Hardware - Technical Role: Field Service Technician Location: Suwanee RemoteStatus: Hybrid Salary: $24 - $26 Compensation details: 24-26 PI93ad9e5-
Relay Technician Trainee location: PLEASANT GROVE, UT, US, 84062 Company: PacifiCorp Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. General Purpose Train to become a Relay Technician through hands-on experience, formal technical coursework, and guided mentorship under an experienced Area Relay Technician. This role builds the foundational knowledge and skills required to progress to a journeyman-level position, supporting the reliable operation of substation protection, control, and metering systems. Responsibilities A Relay Technician Trainee develops a working knowledge of substation equipment and systems while assisting with the installation, maintenance, testing, calibration, troubleshooting, and repair of equipment. This includes, but is not limited to, electromechanical, solid-state, and microprocessor-based protective relays; indicating and kWh/kW metering; recording devices such as sequence of events recorders and digital fault recorders; and control systems associated with breakers, transformers, regulators, capacitors, reactors, and related substation apparatus. The role also supports remote control and monitoring systems, including SCADA. This position requires strict adherence to safety standards and company policies. Work may be performed in confined spaces, at elevated heights, and with specialized equipment such as bucket and boom trucks. The role may involve working independently or as part of a team, responding to emergency conditions, and maintaining responsibility for assigned tools, test equipment, and vehicles. What you'll be doing: Attend technician training schools to learn relay standards and theory and complete electronic courses as specified for the Relay Technician Trainee program. Assist and complete work under the direction of Relay Technicians and Area Relay Technician as outlined on the Relay Technicians' job description. Keep and assist relay technicians in keeping records and files of work performed, reports on outages and trouble, and equipment records. Under supervision, the trainee participates in diagnostic and analytical testing of substation equipment, including power factor testing, transformer turns ratio testing, insulation resistance (megger) testing, and other assigned evaluations. The trainee will also gain experience operating substation equipment, including switching and grounding activities, in accordance with safety protocols. The typical duties described herein represent a major portion of the job. Other similar duties may be assigned. When management determines that it is efficient to do so, employees in this classification may be assigned duties of less complexity. Requirements High School Diploma or GED, or proof of equivalent Certification in an electrical apprenticeship program or equivalent program Demonstrated ability to manage workload and use computerized test program Basic computer skills in MS Office (Word, Excel, Access, and Internet) Candidate must have good driving record Must be able to obtain a CDL Strong ability to follow safety polities and procedures Must have passed relay seminar exam Additional Information Primary Location: PLEASANT GROVE, UT Company code: PacifiCorp Department: Power Delivery Schedule: FULL TIME, 100% onsite Personnel Subarea: IBEW Local 57 Hiring Range: $58.60 BENEFITS: At PacifiCorp, we understand that living a healthy lifestyle isn't just about your physical health - your mental, financial, and social wellbeing also play an important role. That's why we offer a wide range of benefits designed to help you live a more balanced lifestyle. Our Benefits include: Medical, dental, and vision insurance 401k with match fixed contributions, including a Roth and saving option. For union employees, matching contributions vary by union. For nonunion, PacifiCorp makes a fixed contribution equal to 4% of your eligible pay each year for new hires. In addition, PacifiCorp matches 100% of the first 6% you contribute. Life insurance Additional voluntary benefits, including pet insurance Tuition Assistance Mass Transit Pass for employees in our Portland and Salt Lake City Offices. Work Life Balance Generous Paid Time Off (PTO) - Time off varies by employee type (Union or Non-Union) Paid short-term disability leave and long-term disability insurance Paid Parental Leave Paid Bereavement Leave Employee Assistance Program supporting mental and emotional wellbeing For more information, please visit: Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. Nearest Major Market: Salt Lake City Career Segment: Power Systems, Electrical, Technician, Trainee, Energy, Engineering, Entry Level, Technology Compensation details: 58.6-58.6 Hourly Wage PI6d84fd4b361f-8449
06/23/2026
Full time
Relay Technician Trainee location: PLEASANT GROVE, UT, US, 84062 Company: PacifiCorp Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. General Purpose Train to become a Relay Technician through hands-on experience, formal technical coursework, and guided mentorship under an experienced Area Relay Technician. This role builds the foundational knowledge and skills required to progress to a journeyman-level position, supporting the reliable operation of substation protection, control, and metering systems. Responsibilities A Relay Technician Trainee develops a working knowledge of substation equipment and systems while assisting with the installation, maintenance, testing, calibration, troubleshooting, and repair of equipment. This includes, but is not limited to, electromechanical, solid-state, and microprocessor-based protective relays; indicating and kWh/kW metering; recording devices such as sequence of events recorders and digital fault recorders; and control systems associated with breakers, transformers, regulators, capacitors, reactors, and related substation apparatus. The role also supports remote control and monitoring systems, including SCADA. This position requires strict adherence to safety standards and company policies. Work may be performed in confined spaces, at elevated heights, and with specialized equipment such as bucket and boom trucks. The role may involve working independently or as part of a team, responding to emergency conditions, and maintaining responsibility for assigned tools, test equipment, and vehicles. What you'll be doing: Attend technician training schools to learn relay standards and theory and complete electronic courses as specified for the Relay Technician Trainee program. Assist and complete work under the direction of Relay Technicians and Area Relay Technician as outlined on the Relay Technicians' job description. Keep and assist relay technicians in keeping records and files of work performed, reports on outages and trouble, and equipment records. Under supervision, the trainee participates in diagnostic and analytical testing of substation equipment, including power factor testing, transformer turns ratio testing, insulation resistance (megger) testing, and other assigned evaluations. The trainee will also gain experience operating substation equipment, including switching and grounding activities, in accordance with safety protocols. The typical duties described herein represent a major portion of the job. Other similar duties may be assigned. When management determines that it is efficient to do so, employees in this classification may be assigned duties of less complexity. Requirements High School Diploma or GED, or proof of equivalent Certification in an electrical apprenticeship program or equivalent program Demonstrated ability to manage workload and use computerized test program Basic computer skills in MS Office (Word, Excel, Access, and Internet) Candidate must have good driving record Must be able to obtain a CDL Strong ability to follow safety polities and procedures Must have passed relay seminar exam Additional Information Primary Location: PLEASANT GROVE, UT Company code: PacifiCorp Department: Power Delivery Schedule: FULL TIME, 100% onsite Personnel Subarea: IBEW Local 57 Hiring Range: $58.60 BENEFITS: At PacifiCorp, we understand that living a healthy lifestyle isn't just about your physical health - your mental, financial, and social wellbeing also play an important role. That's why we offer a wide range of benefits designed to help you live a more balanced lifestyle. Our Benefits include: Medical, dental, and vision insurance 401k with match fixed contributions, including a Roth and saving option. For union employees, matching contributions vary by union. For nonunion, PacifiCorp makes a fixed contribution equal to 4% of your eligible pay each year for new hires. In addition, PacifiCorp matches 100% of the first 6% you contribute. Life insurance Additional voluntary benefits, including pet insurance Tuition Assistance Mass Transit Pass for employees in our Portland and Salt Lake City Offices. Work Life Balance Generous Paid Time Off (PTO) - Time off varies by employee type (Union or Non-Union) Paid short-term disability leave and long-term disability insurance Paid Parental Leave Paid Bereavement Leave Employee Assistance Program supporting mental and emotional wellbeing For more information, please visit: Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. Nearest Major Market: Salt Lake City Career Segment: Power Systems, Electrical, Technician, Trainee, Energy, Engineering, Entry Level, Technology Compensation details: 58.6-58.6 Hourly Wage PI6d84fd4b361f-8449
Job Overview: Vending Technician - Evansville, IN and surrounding areas About the Role: The Vending Technician is responsible for the installation, set up, repair and ongoing maintenance of vending, cooling and or/fountain equipment Refurbish new and used equipment in service shop. Assure safe operation of assigned vehicle by completing vehicle safety check daily. Educate customers on basic equipment repair and upkeep procedures. Shift and Schedule: Full-time Monday-Thursday while in training and Tuesday-Friday after training 6:30AM - 5:00pm or when the work is complete Flexibility to work overtime and weekend as needed About You We are looking for a self-motivated and customer service-oriented individual who enjoys working in a fast-paced environment. You enjoy interacting with people and would rather be working with your hands and on vending machines. Please apply now if you are the person we're searching for! Total Rewards: Pay starting at $23.64 per hour. The employee will move to a higher rate of $24.86 per hour in the quarter after their 6 month anniversary Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental and Vision, Paid Time Off, 401(k) program with employer match, Child & Elder Care, Adoption Benefits, Paid Parental Leave, Fertility Benefits, Employee Resource Groups, Breastmilk Shipping Services, Dependent Scholarship Program, Tuition Reimbursement, Education Assistance, Employee Assistance Program, Personalized Wellness Platform, and more! Requirements: High school diploma or general equivalency diploma (GED) preferred 1 year of vending and face to face customer interaction experience EPA certification preferred Lift, push and pull a minimum of 40 lbs repeatedly Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
06/23/2026
Full time
Job Overview: Vending Technician - Evansville, IN and surrounding areas About the Role: The Vending Technician is responsible for the installation, set up, repair and ongoing maintenance of vending, cooling and or/fountain equipment Refurbish new and used equipment in service shop. Assure safe operation of assigned vehicle by completing vehicle safety check daily. Educate customers on basic equipment repair and upkeep procedures. Shift and Schedule: Full-time Monday-Thursday while in training and Tuesday-Friday after training 6:30AM - 5:00pm or when the work is complete Flexibility to work overtime and weekend as needed About You We are looking for a self-motivated and customer service-oriented individual who enjoys working in a fast-paced environment. You enjoy interacting with people and would rather be working with your hands and on vending machines. Please apply now if you are the person we're searching for! Total Rewards: Pay starting at $23.64 per hour. The employee will move to a higher rate of $24.86 per hour in the quarter after their 6 month anniversary Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental and Vision, Paid Time Off, 401(k) program with employer match, Child & Elder Care, Adoption Benefits, Paid Parental Leave, Fertility Benefits, Employee Resource Groups, Breastmilk Shipping Services, Dependent Scholarship Program, Tuition Reimbursement, Education Assistance, Employee Assistance Program, Personalized Wellness Platform, and more! Requirements: High school diploma or general equivalency diploma (GED) preferred 1 year of vending and face to face customer interaction experience EPA certification preferred Lift, push and pull a minimum of 40 lbs repeatedly Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
Job Overview: Hiring Now Clean Work Environment Room for Advancement $7,000 Sign On Bonus Looking for a fresh start? A company help grow your skillset and advance your career? Apply Today! We are happy to speak with you about your experience and how you may be a fit within our teams. Lots of exciting things are happening at KDP and we'd love for you to be a part of it! Want to see more? Click the link to visit our website to view some awesome, short clips and information to show you what we're all about KDP Company Overview . You may also view all of our current openings on our Careers Page: KDP Careers - Williamson, NY Facility Location: 4363 Route 104, Williamson, NY 14589 About the facility: The Williamson, NY operation is a roughly 1 million sq ft production facility with 217 acres of land. The site is the Home of the Brand Motts that has been delighting our consumers for more than 140 yrs. We produce a wide variety of products with diverse packaging capabilities going from Apple sauce, to juices and concentrates . Alongside production, the site includes a raw apple operation that is key for the success of the site.The site operation functions on the foundational principles of TPM (Total Productive Maintenance); principles of Lean manufacturing and Six Sigma; and the power of High Performance Teams. This facility is a Unionized location. We are adding to our facility and have lots opportunity to grow and learn our industry! Shift and Schedule: We currently have an opening on Nights. This facility does run 24/7. This individual would work from 6:00pm - 6:00am on a 2-2-3 schedule. Compensation: This is a full time, Union role . Starting pay is $46.58/hr. The candidate will also be awarded a $7,000 sign on bonus. Electro-Mechanical Maintenance Technician The Electro-Mechanic Technician (Manufacturing Maintenance Technician) performs project management duties, maintenance and repairs of all pneumatic machines and line equipment. What you'll Do: Responsible for calibration of microprocessor based control equipment. Responsible for repair/installation of general instrumentation and electrical control systems. Required to be able to read and understand relay logic for the purpose of troubleshooting and repair. Must be able to perform tests and calibration procedures using test equipment including but not limited to CRT terminals, data recorders, multimeter, megger, and amprobe. Will frequently work under pressure to diagnose problems. Must be able to troubleshoot and change PLC programming. Must have understanding of power distribution and wiring practices. Ability to install panel boxes, remote control equipment, motors, power and lighting circuits. Ability to work with minimal supervision on all electrical jobs. Ability to complete work in conformance of any and all safe work practices. Must possess a broad mechanical knowledge. Diagnose, plan, & perform all operations necessary to install, modify, troubleshoot, repair, overhaul, rebuild, & dismantle various types of complex manufacturing & support equipment with special focus on advanced troubleshooting on control systems, servo drives, motors, HMIs, & PLCs on complex high speed packaging lines Perform preventive maintenance & other proactive activities to monitor & maintain equipment condition Troubleshoot and repair of Pneumatic Control Systems, Allen Bradley PLC Systems, RSLinx, Process Control Instrumentation, 3 phase (480V) Circuits, Motor starters and controls Coordinate with other technicians, production personnel, engineering, management, & other stakeholders to communicate & plan maintenance activities Will provide support and substitute for EMT Lead on driving production goals; this includes training, coaching, and filling in for Machine Operators as needed Coordinate with equipment/service vendors for technical assistance Maintain safe, clean, & well-organized work areas Comply with regulatory, Keurig Dr Pepper, & departmental policies, procedures, & standards (especially safety) Assist other maintenance technicians as priorities dictate, time allows, or directed. Identify opportunities for maintenance or process improvement & drive recommendations to implementation or resolution Complete or assist with special projects as directed Perform other duties as requested by management Total Rewards: Pay starting at $46.58/hour $7,000.00 Sign on Bonus Where Applicable: Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements: Ideal Qualifications: High school diploma or general equivalency diploma (GED) preferred. 2 years of experience working in maintenance in a large production facility. 2 years of working knowledge troubleshooting and programming PLCs. 2 years of working knowledge of mechanical systems. Lift, push, pull a minimum of 50 lbs as needed. Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
06/22/2026
Full time
Job Overview: Hiring Now Clean Work Environment Room for Advancement $7,000 Sign On Bonus Looking for a fresh start? A company help grow your skillset and advance your career? Apply Today! We are happy to speak with you about your experience and how you may be a fit within our teams. Lots of exciting things are happening at KDP and we'd love for you to be a part of it! Want to see more? Click the link to visit our website to view some awesome, short clips and information to show you what we're all about KDP Company Overview . You may also view all of our current openings on our Careers Page: KDP Careers - Williamson, NY Facility Location: 4363 Route 104, Williamson, NY 14589 About the facility: The Williamson, NY operation is a roughly 1 million sq ft production facility with 217 acres of land. The site is the Home of the Brand Motts that has been delighting our consumers for more than 140 yrs. We produce a wide variety of products with diverse packaging capabilities going from Apple sauce, to juices and concentrates . Alongside production, the site includes a raw apple operation that is key for the success of the site.The site operation functions on the foundational principles of TPM (Total Productive Maintenance); principles of Lean manufacturing and Six Sigma; and the power of High Performance Teams. This facility is a Unionized location. We are adding to our facility and have lots opportunity to grow and learn our industry! Shift and Schedule: We currently have an opening on Nights. This facility does run 24/7. This individual would work from 6:00pm - 6:00am on a 2-2-3 schedule. Compensation: This is a full time, Union role . Starting pay is $46.58/hr. The candidate will also be awarded a $7,000 sign on bonus. Electro-Mechanical Maintenance Technician The Electro-Mechanic Technician (Manufacturing Maintenance Technician) performs project management duties, maintenance and repairs of all pneumatic machines and line equipment. What you'll Do: Responsible for calibration of microprocessor based control equipment. Responsible for repair/installation of general instrumentation and electrical control systems. Required to be able to read and understand relay logic for the purpose of troubleshooting and repair. Must be able to perform tests and calibration procedures using test equipment including but not limited to CRT terminals, data recorders, multimeter, megger, and amprobe. Will frequently work under pressure to diagnose problems. Must be able to troubleshoot and change PLC programming. Must have understanding of power distribution and wiring practices. Ability to install panel boxes, remote control equipment, motors, power and lighting circuits. Ability to work with minimal supervision on all electrical jobs. Ability to complete work in conformance of any and all safe work practices. Must possess a broad mechanical knowledge. Diagnose, plan, & perform all operations necessary to install, modify, troubleshoot, repair, overhaul, rebuild, & dismantle various types of complex manufacturing & support equipment with special focus on advanced troubleshooting on control systems, servo drives, motors, HMIs, & PLCs on complex high speed packaging lines Perform preventive maintenance & other proactive activities to monitor & maintain equipment condition Troubleshoot and repair of Pneumatic Control Systems, Allen Bradley PLC Systems, RSLinx, Process Control Instrumentation, 3 phase (480V) Circuits, Motor starters and controls Coordinate with other technicians, production personnel, engineering, management, & other stakeholders to communicate & plan maintenance activities Will provide support and substitute for EMT Lead on driving production goals; this includes training, coaching, and filling in for Machine Operators as needed Coordinate with equipment/service vendors for technical assistance Maintain safe, clean, & well-organized work areas Comply with regulatory, Keurig Dr Pepper, & departmental policies, procedures, & standards (especially safety) Assist other maintenance technicians as priorities dictate, time allows, or directed. Identify opportunities for maintenance or process improvement & drive recommendations to implementation or resolution Complete or assist with special projects as directed Perform other duties as requested by management Total Rewards: Pay starting at $46.58/hour $7,000.00 Sign on Bonus Where Applicable: Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements: Ideal Qualifications: High school diploma or general equivalency diploma (GED) preferred. 2 years of experience working in maintenance in a large production facility. 2 years of working knowledge troubleshooting and programming PLCs. 2 years of working knowledge of mechanical systems. Lift, push, pull a minimum of 50 lbs as needed. Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
Job Overview: Hiring Now Clean Work Environment Room for Advancement $7,000 Sign On Bonus Looking for a fresh start? A company help grow your skillset and advance your career? Apply Today! We are happy to speak with you about your experience and how you may be a fit within our teams. Lots of exciting things are happening at KDP and we'd love for you to be a part of it! Want to see more? Click the link to visit our website to view some awesome, short clips and information to show you what we're all about KDP Company Overview . You may also view all of our current openings on our Careers Page: KDP Careers - Williamson, NY Facility Location: 4363 Route 104, Williamson, NY 14589 About the facility: The Williamson, NY operation is a roughly 1 million sq ft production facility with 217 acres of land. The site is the Home of the Brand Motts that has been delighting our consumers for more than 140 yrs. We produce a wide variety of products with diverse packaging capabilities going from Apple sauce, to juices and concentrates . Alongside production, the site includes a raw apple operation that is key for the success of the site.The site operation functions on the foundational principles of TPM (Total Productive Maintenance); principles of Lean manufacturing and Six Sigma; and the power of High Performance Teams. This facility is a Unionized location. We are adding to our facility and have lots opportunity to grow and learn our industry! Shift and Schedule: We currently have an opening on Nights. This facility does run 24/7. This individual would work from 6:00pm - 6:00am on a 2-2-3 schedule. Compensation: This is a full time, Union role . Starting pay is $46.58/hr. The candidate will also be awarded a $7,000 sign on bonus. Electro-Mechanical Maintenance Technician The Electro-Mechanic Technician (Manufacturing Maintenance Technician) performs project management duties, maintenance and repairs of all pneumatic machines and line equipment. What you'll Do: Responsible for calibration of microprocessor based control equipment. Responsible for repair/installation of general instrumentation and electrical control systems. Required to be able to read and understand relay logic for the purpose of troubleshooting and repair. Must be able to perform tests and calibration procedures using test equipment including but not limited to CRT terminals, data recorders, multimeter, megger, and amprobe. Will frequently work under pressure to diagnose problems. Must be able to troubleshoot and change PLC programming. Must have understanding of power distribution and wiring practices. Ability to install panel boxes, remote control equipment, motors, power and lighting circuits. Ability to work with minimal supervision on all electrical jobs. Ability to complete work in conformance of any and all safe work practices. Must possess a broad mechanical knowledge. Diagnose, plan, & perform all operations necessary to install, modify, troubleshoot, repair, overhaul, rebuild, & dismantle various types of complex manufacturing & support equipment with special focus on advanced troubleshooting on control systems, servo drives, motors, HMIs, & PLCs on complex high speed packaging lines Perform preventive maintenance & other proactive activities to monitor & maintain equipment condition Troubleshoot and repair of Pneumatic Control Systems, Allen Bradley PLC Systems, RSLinx, Process Control Instrumentation, 3 phase (480V) Circuits, Motor starters and controls Coordinate with other technicians, production personnel, engineering, management, & other stakeholders to communicate & plan maintenance activities Will provide support and substitute for EMT Lead on driving production goals; this includes training, coaching, and filling in for Machine Operators as needed Coordinate with equipment/service vendors for technical assistance Maintain safe, clean, & well-organized work areas Comply with regulatory, Keurig Dr Pepper, & departmental policies, procedures, & standards (especially safety) Assist other maintenance technicians as priorities dictate, time allows, or directed. Identify opportunities for maintenance or process improvement & drive recommendations to implementation or resolution Complete or assist with special projects as directed Perform other duties as requested by management Total Rewards: Pay starting at $46.58/hour $7,000.00 Sign on Bonus Where Applicable: Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements: Ideal Qualifications: High school diploma or general equivalency diploma (GED) preferred. 2 years of experience working in maintenance in a large production facility. 2 years of working knowledge troubleshooting and programming PLCs. 2 years of working knowledge of mechanical systems. Lift, push, pull a minimum of 50 lbs as needed. Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
06/22/2026
Full time
Job Overview: Hiring Now Clean Work Environment Room for Advancement $7,000 Sign On Bonus Looking for a fresh start? A company help grow your skillset and advance your career? Apply Today! We are happy to speak with you about your experience and how you may be a fit within our teams. Lots of exciting things are happening at KDP and we'd love for you to be a part of it! Want to see more? Click the link to visit our website to view some awesome, short clips and information to show you what we're all about KDP Company Overview . You may also view all of our current openings on our Careers Page: KDP Careers - Williamson, NY Facility Location: 4363 Route 104, Williamson, NY 14589 About the facility: The Williamson, NY operation is a roughly 1 million sq ft production facility with 217 acres of land. The site is the Home of the Brand Motts that has been delighting our consumers for more than 140 yrs. We produce a wide variety of products with diverse packaging capabilities going from Apple sauce, to juices and concentrates . Alongside production, the site includes a raw apple operation that is key for the success of the site.The site operation functions on the foundational principles of TPM (Total Productive Maintenance); principles of Lean manufacturing and Six Sigma; and the power of High Performance Teams. This facility is a Unionized location. We are adding to our facility and have lots opportunity to grow and learn our industry! Shift and Schedule: We currently have an opening on Nights. This facility does run 24/7. This individual would work from 6:00pm - 6:00am on a 2-2-3 schedule. Compensation: This is a full time, Union role . Starting pay is $46.58/hr. The candidate will also be awarded a $7,000 sign on bonus. Electro-Mechanical Maintenance Technician The Electro-Mechanic Technician (Manufacturing Maintenance Technician) performs project management duties, maintenance and repairs of all pneumatic machines and line equipment. What you'll Do: Responsible for calibration of microprocessor based control equipment. Responsible for repair/installation of general instrumentation and electrical control systems. Required to be able to read and understand relay logic for the purpose of troubleshooting and repair. Must be able to perform tests and calibration procedures using test equipment including but not limited to CRT terminals, data recorders, multimeter, megger, and amprobe. Will frequently work under pressure to diagnose problems. Must be able to troubleshoot and change PLC programming. Must have understanding of power distribution and wiring practices. Ability to install panel boxes, remote control equipment, motors, power and lighting circuits. Ability to work with minimal supervision on all electrical jobs. Ability to complete work in conformance of any and all safe work practices. Must possess a broad mechanical knowledge. Diagnose, plan, & perform all operations necessary to install, modify, troubleshoot, repair, overhaul, rebuild, & dismantle various types of complex manufacturing & support equipment with special focus on advanced troubleshooting on control systems, servo drives, motors, HMIs, & PLCs on complex high speed packaging lines Perform preventive maintenance & other proactive activities to monitor & maintain equipment condition Troubleshoot and repair of Pneumatic Control Systems, Allen Bradley PLC Systems, RSLinx, Process Control Instrumentation, 3 phase (480V) Circuits, Motor starters and controls Coordinate with other technicians, production personnel, engineering, management, & other stakeholders to communicate & plan maintenance activities Will provide support and substitute for EMT Lead on driving production goals; this includes training, coaching, and filling in for Machine Operators as needed Coordinate with equipment/service vendors for technical assistance Maintain safe, clean, & well-organized work areas Comply with regulatory, Keurig Dr Pepper, & departmental policies, procedures, & standards (especially safety) Assist other maintenance technicians as priorities dictate, time allows, or directed. Identify opportunities for maintenance or process improvement & drive recommendations to implementation or resolution Complete or assist with special projects as directed Perform other duties as requested by management Total Rewards: Pay starting at $46.58/hour $7,000.00 Sign on Bonus Where Applicable: Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements: Ideal Qualifications: High school diploma or general equivalency diploma (GED) preferred. 2 years of experience working in maintenance in a large production facility. 2 years of working knowledge troubleshooting and programming PLCs. 2 years of working knowledge of mechanical systems. Lift, push, pull a minimum of 50 lbs as needed. Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
Job Overview: Hiring Now Clean Work Environment Room for Advancement $7,000 Sign On Bonus Looking for a fresh start? A company help grow your skillset and advance your career? Apply Today! We are happy to speak with you about your experience and how you may be a fit within our teams. Lots of exciting things are happening at KDP and we'd love for you to be a part of it! Want to see more? Click the link to visit our website to view some awesome, short clips and information to show you what we're all about KDP Company Overview . You may also view all of our current openings on our Careers Page: KDP Careers - Williamson, NY Facility Location: 4363 Route 104, Williamson, NY 14589 About the facility: The Williamson, NY operation is a roughly 1 million sq ft production facility with 217 acres of land. The site is the Home of the Brand Motts that has been delighting our consumers for more than 140 yrs. We produce a wide variety of products with diverse packaging capabilities going from Apple sauce, to juices and concentrates . Alongside production, the site includes a raw apple operation that is key for the success of the site.The site operation functions on the foundational principles of TPM (Total Productive Maintenance); principles of Lean manufacturing and Six Sigma; and the power of High Performance Teams. This facility is a Unionized location. We are adding to our facility and have lots opportunity to grow and learn our industry! Shift and Schedule: We currently have an opening on Nights. This facility does run 24/7. This individual would work from 6:00pm - 6:00am on a 2-2-3 schedule. Compensation: This is a full time, Union role . Starting pay is $46.58/hr. The candidate will also be awarded a $7,000 sign on bonus. Electro-Mechanical Maintenance Technician The Electro-Mechanic Technician (Manufacturing Maintenance Technician) performs project management duties, maintenance and repairs of all pneumatic machines and line equipment. What you'll Do: Responsible for calibration of microprocessor based control equipment. Responsible for repair/installation of general instrumentation and electrical control systems. Required to be able to read and understand relay logic for the purpose of troubleshooting and repair. Must be able to perform tests and calibration procedures using test equipment including but not limited to CRT terminals, data recorders, multimeter, megger, and amprobe. Will frequently work under pressure to diagnose problems. Must be able to troubleshoot and change PLC programming. Must have understanding of power distribution and wiring practices. Ability to install panel boxes, remote control equipment, motors, power and lighting circuits. Ability to work with minimal supervision on all electrical jobs. Ability to complete work in conformance of any and all safe work practices. Must possess a broad mechanical knowledge. Diagnose, plan, & perform all operations necessary to install, modify, troubleshoot, repair, overhaul, rebuild, & dismantle various types of complex manufacturing & support equipment with special focus on advanced troubleshooting on control systems, servo drives, motors, HMIs, & PLCs on complex high speed packaging lines Perform preventive maintenance & other proactive activities to monitor & maintain equipment condition Troubleshoot and repair of Pneumatic Control Systems, Allen Bradley PLC Systems, RSLinx, Process Control Instrumentation, 3 phase (480V) Circuits, Motor starters and controls Coordinate with other technicians, production personnel, engineering, management, & other stakeholders to communicate & plan maintenance activities Will provide support and substitute for EMT Lead on driving production goals; this includes training, coaching, and filling in for Machine Operators as needed Coordinate with equipment/service vendors for technical assistance Maintain safe, clean, & well-organized work areas Comply with regulatory, Keurig Dr Pepper, & departmental policies, procedures, & standards (especially safety) Assist other maintenance technicians as priorities dictate, time allows, or directed. Identify opportunities for maintenance or process improvement & drive recommendations to implementation or resolution Complete or assist with special projects as directed Perform other duties as requested by management Total Rewards: Pay starting at $46.58/hour $7,000.00 Sign on Bonus Where Applicable: Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements: Ideal Qualifications: High school diploma or general equivalency diploma (GED) preferred. 2 years of experience working in maintenance in a large production facility. 2 years of working knowledge troubleshooting and programming PLCs. 2 years of working knowledge of mechanical systems. Lift, push, pull a minimum of 50 lbs as needed. Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
06/22/2026
Full time
Job Overview: Hiring Now Clean Work Environment Room for Advancement $7,000 Sign On Bonus Looking for a fresh start? A company help grow your skillset and advance your career? Apply Today! We are happy to speak with you about your experience and how you may be a fit within our teams. Lots of exciting things are happening at KDP and we'd love for you to be a part of it! Want to see more? Click the link to visit our website to view some awesome, short clips and information to show you what we're all about KDP Company Overview . You may also view all of our current openings on our Careers Page: KDP Careers - Williamson, NY Facility Location: 4363 Route 104, Williamson, NY 14589 About the facility: The Williamson, NY operation is a roughly 1 million sq ft production facility with 217 acres of land. The site is the Home of the Brand Motts that has been delighting our consumers for more than 140 yrs. We produce a wide variety of products with diverse packaging capabilities going from Apple sauce, to juices and concentrates . Alongside production, the site includes a raw apple operation that is key for the success of the site.The site operation functions on the foundational principles of TPM (Total Productive Maintenance); principles of Lean manufacturing and Six Sigma; and the power of High Performance Teams. This facility is a Unionized location. We are adding to our facility and have lots opportunity to grow and learn our industry! Shift and Schedule: We currently have an opening on Nights. This facility does run 24/7. This individual would work from 6:00pm - 6:00am on a 2-2-3 schedule. Compensation: This is a full time, Union role . Starting pay is $46.58/hr. The candidate will also be awarded a $7,000 sign on bonus. Electro-Mechanical Maintenance Technician The Electro-Mechanic Technician (Manufacturing Maintenance Technician) performs project management duties, maintenance and repairs of all pneumatic machines and line equipment. What you'll Do: Responsible for calibration of microprocessor based control equipment. Responsible for repair/installation of general instrumentation and electrical control systems. Required to be able to read and understand relay logic for the purpose of troubleshooting and repair. Must be able to perform tests and calibration procedures using test equipment including but not limited to CRT terminals, data recorders, multimeter, megger, and amprobe. Will frequently work under pressure to diagnose problems. Must be able to troubleshoot and change PLC programming. Must have understanding of power distribution and wiring practices. Ability to install panel boxes, remote control equipment, motors, power and lighting circuits. Ability to work with minimal supervision on all electrical jobs. Ability to complete work in conformance of any and all safe work practices. Must possess a broad mechanical knowledge. Diagnose, plan, & perform all operations necessary to install, modify, troubleshoot, repair, overhaul, rebuild, & dismantle various types of complex manufacturing & support equipment with special focus on advanced troubleshooting on control systems, servo drives, motors, HMIs, & PLCs on complex high speed packaging lines Perform preventive maintenance & other proactive activities to monitor & maintain equipment condition Troubleshoot and repair of Pneumatic Control Systems, Allen Bradley PLC Systems, RSLinx, Process Control Instrumentation, 3 phase (480V) Circuits, Motor starters and controls Coordinate with other technicians, production personnel, engineering, management, & other stakeholders to communicate & plan maintenance activities Will provide support and substitute for EMT Lead on driving production goals; this includes training, coaching, and filling in for Machine Operators as needed Coordinate with equipment/service vendors for technical assistance Maintain safe, clean, & well-organized work areas Comply with regulatory, Keurig Dr Pepper, & departmental policies, procedures, & standards (especially safety) Assist other maintenance technicians as priorities dictate, time allows, or directed. Identify opportunities for maintenance or process improvement & drive recommendations to implementation or resolution Complete or assist with special projects as directed Perform other duties as requested by management Total Rewards: Pay starting at $46.58/hour $7,000.00 Sign on Bonus Where Applicable: Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements: Ideal Qualifications: High school diploma or general equivalency diploma (GED) preferred. 2 years of experience working in maintenance in a large production facility. 2 years of working knowledge troubleshooting and programming PLCs. 2 years of working knowledge of mechanical systems. Lift, push, pull a minimum of 50 lbs as needed. Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
Description: Hiring for ALL BRANDS! Domestic and Imports! Ressler Motors, Gallatin Import Group, and Gallatin Motors sell and service all major brands and manufactures. Ressler Motors is the largest volume dealership in the state of Montana, providing countless drivers in Butte, Helena, Billings, Livingston, Manhattan, and beyond. Ressler Motors is happy to serve many Montana communities with top-notch vehicles and quality automotive services, and we make a point to go above and beyond to show our commitment to the people we serve. If you're ready to work with a dealership that has your best interests at heart, then come to Ressler Motors. $20-$40 plus BENEFITS and opportunities for growth! Sign on bonus and moving expense reimbursement available. The Automotive Technician is responsible for performing the requested services including general mechanical repairs while maintaining the highest level of customer service and satisfaction. ESSENTIAL DUTIES: • Communicate with the Service Advisor to determine the scope of work requested, and acknowledge customers who are waiting. • Perform the 21-point vehicle maintenance inspection report thoroughly. Advise Service Advisor if services are recommended or if repairs are needed. • Perform work as outlined on repair order with efficiency and accuracy in accordance with dealership and factory standards. • Advise Service Consultant immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the time promised. • Perform engine, power steering, coolant, transmission, and brake flushes. • Perform oil changes and lubrication work and check all filters. • Perform diagnostics to determine what repairs are necessary • Inspect all fluid levels of vehicle including, but not limited to: power steering, windshield washer, transmission, transaxle, engine oil, coolant, brake, clutch, t-case, front and rear differentials, and any fluids depending on vehicle type. • Rotate tires and check and adjust tire pressure as recommended by manufacturers, properly torque lug nuts with torque wrench or torque sticks and change tires using all safety precautions and protocols. • Ensure that customer's vehicle is delivered. • Operates and maintains all lubrication equipment. • Ensure all equipment is in proper working order, especially the lifts. • Document all service and installation actions performed by completing forms, reports, logs, and records. All complaint, cause, and correction must properly and informatively completed on all repair orders. Follow all proper published time guides. • Updates job knowledge by participating in training and education opportunities. Requirements: Valid Drivers License Automotive Technician experience required. Compensation details: 20-40 Hourly Wage PIc04aea5-
06/21/2026
Full time
Description: Hiring for ALL BRANDS! Domestic and Imports! Ressler Motors, Gallatin Import Group, and Gallatin Motors sell and service all major brands and manufactures. Ressler Motors is the largest volume dealership in the state of Montana, providing countless drivers in Butte, Helena, Billings, Livingston, Manhattan, and beyond. Ressler Motors is happy to serve many Montana communities with top-notch vehicles and quality automotive services, and we make a point to go above and beyond to show our commitment to the people we serve. If you're ready to work with a dealership that has your best interests at heart, then come to Ressler Motors. $20-$40 plus BENEFITS and opportunities for growth! Sign on bonus and moving expense reimbursement available. The Automotive Technician is responsible for performing the requested services including general mechanical repairs while maintaining the highest level of customer service and satisfaction. ESSENTIAL DUTIES: • Communicate with the Service Advisor to determine the scope of work requested, and acknowledge customers who are waiting. • Perform the 21-point vehicle maintenance inspection report thoroughly. Advise Service Advisor if services are recommended or if repairs are needed. • Perform work as outlined on repair order with efficiency and accuracy in accordance with dealership and factory standards. • Advise Service Consultant immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the time promised. • Perform engine, power steering, coolant, transmission, and brake flushes. • Perform oil changes and lubrication work and check all filters. • Perform diagnostics to determine what repairs are necessary • Inspect all fluid levels of vehicle including, but not limited to: power steering, windshield washer, transmission, transaxle, engine oil, coolant, brake, clutch, t-case, front and rear differentials, and any fluids depending on vehicle type. • Rotate tires and check and adjust tire pressure as recommended by manufacturers, properly torque lug nuts with torque wrench or torque sticks and change tires using all safety precautions and protocols. • Ensure that customer's vehicle is delivered. • Operates and maintains all lubrication equipment. • Ensure all equipment is in proper working order, especially the lifts. • Document all service and installation actions performed by completing forms, reports, logs, and records. All complaint, cause, and correction must properly and informatively completed on all repair orders. Follow all proper published time guides. • Updates job knowledge by participating in training and education opportunities. Requirements: Valid Drivers License Automotive Technician experience required. Compensation details: 20-40 Hourly Wage PIc04aea5-
