Job Description Summary The Industrial Plumbing Steamfitter will be responsible for supporting the operation, maintenance and improvement of system-controlled robotics, steam systems, machine tools and equipment. Job Description Job Description Essential Responsibilities As the Industrial Plumbing Steamfitter, you will: Identify and evaluate the condition of hydraulic, steam and HVAC equipment and determine strategy to repair and rebuild Own preventative maintenance, inspections and extensive repairs; diagnose problems, plan and complete work required, identify and order parts Installs & repairs pipes, fixtures, and valves, for water, gas, steam, and air systems. Installs supports for pipes, equipment, and fixtures prior to installation. Assembles fittings and valves for installation. Modifies length of pipes, fixtures, and other plumbing materials as needed. Uses saws and pipe cutters as necessary. Installs heating and air-conditioning systems, including water heaters. Collaborates with contractors, construction workers, electricians, pipefitters, and steamfitters in installing and repairing plumbing systems. Tests plumbing systems for leaks and other problems. Analyses problem and identifies appropriate tools and materials for repair. Uses a CMMS documenting the problem and summary of actions taken. Requirements Must have at least one of the following: AAS degree in Mechanical or Plant Utilities Technology AOS degree in HVAC or Construction & Maintenance Military Training Course in related field 3 years work experience in a Manufacturing Facility (with references) 3 years proven experience in Commercial HVAC service and installation. Completion of 2 years of a Plumber/Steamfitter Apprentice Program (considered 3rd year apprentice) Journeyman Steamfitter Licensed NYS Plumber ELIGIBILITY REQUIREMENTS: Ability and willingness to work off shifts and weekends Ability and willingness to work 2nd shift (3:00 PM to 11:00 PM) Desired Characteristics: Minimum 3 years work experience in Manufacturing Facility in a technical maintenance role Strong mechanical and hydraulic fundamental and safety knowledge (schematics, precision measurement tools, LOTO) The base pay range for this position is $35.68/hr - $43.89/hr. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for contractually negotiated general wage increases and COLA increases. This position is eligible for a $1.00 per hour Night Shift Bonus. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on January 30, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
05/31/2026
Full time
Job Description Summary The Industrial Plumbing Steamfitter will be responsible for supporting the operation, maintenance and improvement of system-controlled robotics, steam systems, machine tools and equipment. Job Description Job Description Essential Responsibilities As the Industrial Plumbing Steamfitter, you will: Identify and evaluate the condition of hydraulic, steam and HVAC equipment and determine strategy to repair and rebuild Own preventative maintenance, inspections and extensive repairs; diagnose problems, plan and complete work required, identify and order parts Installs & repairs pipes, fixtures, and valves, for water, gas, steam, and air systems. Installs supports for pipes, equipment, and fixtures prior to installation. Assembles fittings and valves for installation. Modifies length of pipes, fixtures, and other plumbing materials as needed. Uses saws and pipe cutters as necessary. Installs heating and air-conditioning systems, including water heaters. Collaborates with contractors, construction workers, electricians, pipefitters, and steamfitters in installing and repairing plumbing systems. Tests plumbing systems for leaks and other problems. Analyses problem and identifies appropriate tools and materials for repair. Uses a CMMS documenting the problem and summary of actions taken. Requirements Must have at least one of the following: AAS degree in Mechanical or Plant Utilities Technology AOS degree in HVAC or Construction & Maintenance Military Training Course in related field 3 years work experience in a Manufacturing Facility (with references) 3 years proven experience in Commercial HVAC service and installation. Completion of 2 years of a Plumber/Steamfitter Apprentice Program (considered 3rd year apprentice) Journeyman Steamfitter Licensed NYS Plumber ELIGIBILITY REQUIREMENTS: Ability and willingness to work off shifts and weekends Ability and willingness to work 2nd shift (3:00 PM to 11:00 PM) Desired Characteristics: Minimum 3 years work experience in Manufacturing Facility in a technical maintenance role Strong mechanical and hydraulic fundamental and safety knowledge (schematics, precision measurement tools, LOTO) The base pay range for this position is $35.68/hr - $43.89/hr. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for contractually negotiated general wage increases and COLA increases. This position is eligible for a $1.00 per hour Night Shift Bonus. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on January 30, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
05/31/2026
Full time
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
05/31/2026
Full time
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
Class II AHU Fabricator - 2nd Shift Location: Albany, MO Shift: 2nd Shift Full-Time Pay: $21.50 + $1.00 Shift Premium for 2nd Shift At Johnson Controls Inc. (Albany Plant), we build custom high quality, commercial air handling units (AHU) from sheet metal. We are hiring for Class II AHU Fabricators on our 2nd shift team! What You Will Do Ensure hardware and components match Bill of Materials (BOM) Install components securely and ensure proper fit and alignment according to the Spec Sheet. Prepare product to be painted and shipped Install hardware and custom parts into assembly per specification for HVAC Units Identify proper parts to complete assemblies by reading specification sheets and blueprints Utilize rivet gun, air gun, knife, welding and other hand tools to perform duties Operate bridge crane or hoist shipments from shipping and receiving platform to storage or work area Perform preventative maintenance and make minor machine repairs as needed Responsible for adhering to a production schedule, ensuring that all parts are properly fitted, aligned, and secured and ensuring that safety standards are always met Job Requirements Ability to read, interpret, and follow blueprints and build plans preferred Previous experience in an industrial setting a plus! Benefits You'll Receive On the Job Training Medical Dental Vision 401k with company match Life Insurance Paid Holidays Paid Vacation Short-term and Long-term disability Plus, other optional benefits such as: Pet insurance, ID Theft, legal support and more! Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Education/Experience High school diploma or GED preferred Language Ability Ability to read and comprehend the English language - this includes simple instructions, short correspondence, and memos (i.e. safety rules, operating and maintenance instructions, shop-floor paperwork, and procedure manuals) Ability to write simple correspondence Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization Math Ability Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Ability to compute rate and percent and interpret bar graphs Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form Ability to deal with problems involving several concrete variables in standardized situations Computer Skills Basic computers skills required Certificates & Licenses Operating a fork truck is a preferred function Supervisory Responsibilities This job has no supervisory responsibilities Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts; fumes or airborne particles and vibration. The noise level in the work environment is usually loud. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand and walk. The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. HPT Must actively participate in all high-performance team activities. THE ABOVE DESCRIPTION OUTLINES THE MOST SIGNICANT JOB FUNCTIONS PERFORMED BUT MAY INCLUDE OTHER SIMILAR FUNCTIONS OR ASSIGNMENTS NOT SPECIFICALLY MENTIONED.
05/31/2026
Full time
Class II AHU Fabricator - 2nd Shift Location: Albany, MO Shift: 2nd Shift Full-Time Pay: $21.50 + $1.00 Shift Premium for 2nd Shift At Johnson Controls Inc. (Albany Plant), we build custom high quality, commercial air handling units (AHU) from sheet metal. We are hiring for Class II AHU Fabricators on our 2nd shift team! What You Will Do Ensure hardware and components match Bill of Materials (BOM) Install components securely and ensure proper fit and alignment according to the Spec Sheet. Prepare product to be painted and shipped Install hardware and custom parts into assembly per specification for HVAC Units Identify proper parts to complete assemblies by reading specification sheets and blueprints Utilize rivet gun, air gun, knife, welding and other hand tools to perform duties Operate bridge crane or hoist shipments from shipping and receiving platform to storage or work area Perform preventative maintenance and make minor machine repairs as needed Responsible for adhering to a production schedule, ensuring that all parts are properly fitted, aligned, and secured and ensuring that safety standards are always met Job Requirements Ability to read, interpret, and follow blueprints and build plans preferred Previous experience in an industrial setting a plus! Benefits You'll Receive On the Job Training Medical Dental Vision 401k with company match Life Insurance Paid Holidays Paid Vacation Short-term and Long-term disability Plus, other optional benefits such as: Pet insurance, ID Theft, legal support and more! Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Education/Experience High school diploma or GED preferred Language Ability Ability to read and comprehend the English language - this includes simple instructions, short correspondence, and memos (i.e. safety rules, operating and maintenance instructions, shop-floor paperwork, and procedure manuals) Ability to write simple correspondence Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization Math Ability Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Ability to compute rate and percent and interpret bar graphs Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form Ability to deal with problems involving several concrete variables in standardized situations Computer Skills Basic computers skills required Certificates & Licenses Operating a fork truck is a preferred function Supervisory Responsibilities This job has no supervisory responsibilities Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts; fumes or airborne particles and vibration. The noise level in the work environment is usually loud. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand and walk. The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. HPT Must actively participate in all high-performance team activities. THE ABOVE DESCRIPTION OUTLINES THE MOST SIGNICANT JOB FUNCTIONS PERFORMED BUT MAY INCLUDE OTHER SIMILAR FUNCTIONS OR ASSIGNMENTS NOT SPECIFICALLY MENTIONED.
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
05/31/2026
Full time
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
Job Description Summary GE Vernova's Power Conversion & Storage business combines advanced energy conversion and storage systems to meet the electrification needs of utilities and industries. With a focus on power stability, energy storage and industrial electrification solutions, Power Conversion & Storage empowers customers by addressing their most complex electrification challenges and accelerating their transition to a sustainable, decarbonized future. The Lead Field Service Engineer - Drives under general guidance and minimal supervision, performs a wide range of engineering tasks and ensures proper installation, service and commissioning of products and services. Provides technical support for installation and commissioning of projects and provides maintenance, breakdown emergency support and remote troubleshooting. Job Description Essential Responsibilities: As a Field Service Engineer, you will: Perform installation and commissioning on drive systems, power systems, automation systems or dynamic positioning systems at customer site locations during ship construction. Performs troubleshooting activities at site locations during scheduled Port visits or at sea to diagnose problems, determine appropriate resolution, and implements corrective actions. Performs a wide range of engineering tasks to ensure the technical integrity and proper installation and commissioning of our equipment. Develop documentation to execute work such as commissioning and maintenance procedures, as well as execute customer training. Execute on site project management and technical leader duties to resolve customer issues and provide customer satisfaction Identify sales opportunities for service agreements, spare parts, training, and upgrades. Provide on call support in response to customer calls for service. Assist in the growth and direction of the North American business. Provide support to engineering teams working on customer upgrade projects Complete timely service reports and other administrative requirements Perform work on-board vessels within GE / Customer safety guidelines either in shipyards or offshore. Extended hours / overtime maybe required during peak periods and emergency circumstances. Domestic or overseas travel to customer sites for extended periods of time. Qualifications/Requirements: Bachelor's Degree in Electrical Engineering or related discipline from an accredited college or university. OR Associate's Degree or related discipline from an accredited college or university with a minimum 5 additional years of related industry experience. OR School diploma or GED equivalency with a minimum of 8 years of related industry experience. Ability and willingness to travel 85% of the time on short notice Desired Characteristics: Must be physically fit to be able to board vessels offshore. Previous Marine Industry Experience. For field service engineers that have the potential of working offshore, must be able to pass a Helicopter Underwater Egress Training (HUET) and offshore survival course which includes activities in a swimming pool. US Person with the ability to achieve security clearance for Department of Defense projects. Possesses leadership qualities that align with GE Vernova Way. Background in a customer facing position within a Service environment. Ability to execute increasingly complicated assignments, which require considerable engineering skill and creative ability and independent judgment. The work environment at onsite locations is of a construction type setting. Whilst performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions, moving mechanical parts, extreme cold, extreme heat, risk of electrical shock, risk of trips, slips and falls. The noise level on-site or on-board ships can be excessive, personal protective equipment (PPE) will be required. Strong computer proficiency and technical aptitude with the ability to utilize MS Office applications. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No - This is a remote position For candidates applying to a U.S. based position, the pay range for this position is between $78,800.00 and $131,200.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. Bonus eligibility: discretionary annual bonus. This posting is expected to remain open for at least seven days after it was posted on January 30, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off. GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
05/31/2026
Full time
Job Description Summary GE Vernova's Power Conversion & Storage business combines advanced energy conversion and storage systems to meet the electrification needs of utilities and industries. With a focus on power stability, energy storage and industrial electrification solutions, Power Conversion & Storage empowers customers by addressing their most complex electrification challenges and accelerating their transition to a sustainable, decarbonized future. The Lead Field Service Engineer - Drives under general guidance and minimal supervision, performs a wide range of engineering tasks and ensures proper installation, service and commissioning of products and services. Provides technical support for installation and commissioning of projects and provides maintenance, breakdown emergency support and remote troubleshooting. Job Description Essential Responsibilities: As a Field Service Engineer, you will: Perform installation and commissioning on drive systems, power systems, automation systems or dynamic positioning systems at customer site locations during ship construction. Performs troubleshooting activities at site locations during scheduled Port visits or at sea to diagnose problems, determine appropriate resolution, and implements corrective actions. Performs a wide range of engineering tasks to ensure the technical integrity and proper installation and commissioning of our equipment. Develop documentation to execute work such as commissioning and maintenance procedures, as well as execute customer training. Execute on site project management and technical leader duties to resolve customer issues and provide customer satisfaction Identify sales opportunities for service agreements, spare parts, training, and upgrades. Provide on call support in response to customer calls for service. Assist in the growth and direction of the North American business. Provide support to engineering teams working on customer upgrade projects Complete timely service reports and other administrative requirements Perform work on-board vessels within GE / Customer safety guidelines either in shipyards or offshore. Extended hours / overtime maybe required during peak periods and emergency circumstances. Domestic or overseas travel to customer sites for extended periods of time. Qualifications/Requirements: Bachelor's Degree in Electrical Engineering or related discipline from an accredited college or university. OR Associate's Degree or related discipline from an accredited college or university with a minimum 5 additional years of related industry experience. OR School diploma or GED equivalency with a minimum of 8 years of related industry experience. Ability and willingness to travel 85% of the time on short notice Desired Characteristics: Must be physically fit to be able to board vessels offshore. Previous Marine Industry Experience. For field service engineers that have the potential of working offshore, must be able to pass a Helicopter Underwater Egress Training (HUET) and offshore survival course which includes activities in a swimming pool. US Person with the ability to achieve security clearance for Department of Defense projects. Possesses leadership qualities that align with GE Vernova Way. Background in a customer facing position within a Service environment. Ability to execute increasingly complicated assignments, which require considerable engineering skill and creative ability and independent judgment. The work environment at onsite locations is of a construction type setting. Whilst performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions, moving mechanical parts, extreme cold, extreme heat, risk of electrical shock, risk of trips, slips and falls. The noise level on-site or on-board ships can be excessive, personal protective equipment (PPE) will be required. Strong computer proficiency and technical aptitude with the ability to utilize MS Office applications. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No - This is a remote position For candidates applying to a U.S. based position, the pay range for this position is between $78,800.00 and $131,200.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. Bonus eligibility: discretionary annual bonus. This posting is expected to remain open for at least seven days after it was posted on January 30, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off. GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
05/31/2026
Full time
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
05/31/2026
Full time
Job Description Summary The Lead Wind Hub Technician is a critical and active role to maintain optimal function and output at the wind site by working daily on turbine operations, planning, required maintenance, safety, quality control, warranty repair(s) and customer service. The Lead Wind Technician partners and communicates with the Site Manager to execute on contract requirements and timelines and ensures alignment with GE excellence! The Wind Technician position requires local travel within the hub. Job Description Essential Responsibilities As the Lead Wind Hub Technician, you will: Work with Hub Manager to execute contractual obligations per customer requirements and activities set forth with on a daily basis, which include any portion of the electrical and mechanical equipment used in the GE wind turbine generator Perform maintenance, repair or replacement of parts to correct malfunctions Troubleshoot complex mechanical, hydraulic, and electrical problems on variable pitch & variable speed turbines Support in all areas of site operations as directed by manager with minimal supervision including daily schedules and planning, supporting tech development, overall site leadership and customer service Perform some diagnostic electrical analysis Document all work performed using computer based service reporting procedures Work with and respond to GE's remote operations center when necessary Qualifications/Requirements High School Diploma or equivalent Internal; Minimum of 2 year work experience as a Wind Technician, or External; Minimum of 4 years of electrical and leadership work experience. Eligibility Requirements: Passing a Technical Knowledge Assessment Must have and maintain a valid driver's license Handle repetitive weight of 50 lbs, and climb towers up to 300 feet daily Meet specified manufacturer weight limits not to exceed 300lbs including required gear. Understand electrical schematic drawings, technical manuals, procedures, and regulations. Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Flexibility to work rotating shift schedules, and on-call per site needs Customer service experience with effective communication skills The Wind Technician position requires local travel within the hub Desired Characteristics Associate's or Bachelor's Degree in a Technical, Electrical, or Electronics field from an accredited college or university Technical Certification in Wind Energy or Electrical / Electronic field Ability to work with a wide variety of personnel at all levels inside and outside of the Wind Farm Wind turbine experience Ability and willingness to take initiative, and work without direct supervision Electrical, mechanical, and/or hydraulic experience Experience using hydraulic power tools Experience with heavy equipment required for facility maintenance with a working knowledge of crane and rigging requirements GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes - This is a remote position For candidates applying to a U.S. based position only: The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on April 20, 2026. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
05/31/2026
Full time
Irving Materials Incorporated, a leading supplier of Ready-mix concrete and concrete construction materials since 1946, is seeking safe and reliable commercial drivers in your area. We have multiple CDL Driver positions available. Class "A" or "B" CDL Required Local Delivery Only No Overnights Competitive Pay - $55,000 to $70,000 annually Low-Priced Family Medical Benefits Paid Holidays Daily Overtime after 8 hours Extra Pay for Early Starts and Saturdays Paid Vacation Time 6% 401K Contribution Job Summary: We are seeking a dedicated and responsible Ready-Mix Truck Driver with at least a Class "B" CDL to join our team. In this full-time role, you will be entrusted with the safe and efficient delivery of ready-mix concrete to both residential and industrial sites. The ideal candidate will have a clean driving record, demonstrate a commitment to safety policies, and maintain the operational cleanliness of the truck. Your role is vital in ensuring customer satisfaction by adhering to delivery schedules and providing excellent service. We value integrity, reliability, and a positive attitude, making you an essential part of our logistics operation. Key Responsibilities: Operate ready-mix trucks safely and efficiently: Perform deliveries to various locations, including residential and industrial areas. Ensure compliance with all road safety regulations and company policies. Maintain the operational and mechanical condition of equipment: Conduct routine inspections and minor maintenance on the vehicle. Report major mechanical issues to a supervisor in a timely manner. Support a clean and safe working environment: Assist in maintaining cleanliness around the ready-mix plant as directed by a supervisor. Follow safety protocols and contribute to a safe working environment. Engage positively with customers to ensure satisfaction: Demonstrate professionalism and maintain high levels of integrity during interactions. Provide reliable updates and timely deliveries as per customer expectations. Adhere to all safety policies: Commit to continuous improvement in workplace health and safety standards. Participate in safety training and adhere to all guidelines set forth. Experience/Qualifications: Education: High School Diploma or equivalent required. Experience: Experience operating commercial vehicles preferred. Previous experience in ready-mix delivery or a similar industry is a plus. Skills: Possess a valid Class A or B CDL with Air brakes and a clean driving record. Strong communication skills with a commitment to customer service. Ability to work independently and as part of a team. Problem-solving skills and attention to detail regarding vehicle maintenance. Spanish-speaking or bilingual capabilities are considered a plus.
