Position: Route Maintenance Technician Hourly Compensation: $17.00 to $18.00/hr Location: Oklahoma City, OK Position Summary: This individual will utilize their experience to complete work order service requests in support of Store Operations. Must possess broad skills in various trades to perform minor electrical, plumbing, mechanical, building repairs and preventative maintenance. Duties include building and equipment repair, and project work relating to store sales initiatives. Schedule is Monday through Friday unless needed for other restaurant repair projects. Additionally, this position is responsible to support other Maintenance Technicians within their region. Electrical repair; Lamp changing, Ballast Replacement, Receptacle and Light switch replacement, Diagnostic Capability Plumbing Repair; Faucet and hand sprayer, urinal and toilet flush valves, above ground drain lines, filter changes, Diagnostic Capability. HVAC; Filter changes, Ventahood Belt Changes, Basic understanding of commercial equipment operation and maintenance procedures. Mechanical; Minor switch and element replacement. Basic Building Repair; painting, wall repair, floor repair, minor carpentry, etc. This position is expected to remain flexible in work scheduling to meet changing store objectives. Performs other duties as required. Minimum of 1 year experience High School Diploma or equivalent Must have good driving record Self-motivated, driven, honest, and dependable Physical ability to lift up to 50 lbs. Physical ability to climb ladders and work at high elevations Must be able to work evenings and/or weekends Benefits: Medical, Dental, Vision Insurance 401K Retirement planning with Company Match Short-Term disability Insurance Paid Vacations Product discounts and More!Braum's is an equal opportunity employerA criminal background check and drug screening are required as part of the on-boarding process.If interested, please apply here. For questions, please call . Thank you!
12/13/2025
Full time
Position: Route Maintenance Technician Hourly Compensation: $17.00 to $18.00/hr Location: Oklahoma City, OK Position Summary: This individual will utilize their experience to complete work order service requests in support of Store Operations. Must possess broad skills in various trades to perform minor electrical, plumbing, mechanical, building repairs and preventative maintenance. Duties include building and equipment repair, and project work relating to store sales initiatives. Schedule is Monday through Friday unless needed for other restaurant repair projects. Additionally, this position is responsible to support other Maintenance Technicians within their region. Electrical repair; Lamp changing, Ballast Replacement, Receptacle and Light switch replacement, Diagnostic Capability Plumbing Repair; Faucet and hand sprayer, urinal and toilet flush valves, above ground drain lines, filter changes, Diagnostic Capability. HVAC; Filter changes, Ventahood Belt Changes, Basic understanding of commercial equipment operation and maintenance procedures. Mechanical; Minor switch and element replacement. Basic Building Repair; painting, wall repair, floor repair, minor carpentry, etc. This position is expected to remain flexible in work scheduling to meet changing store objectives. Performs other duties as required. Minimum of 1 year experience High School Diploma or equivalent Must have good driving record Self-motivated, driven, honest, and dependable Physical ability to lift up to 50 lbs. Physical ability to climb ladders and work at high elevations Must be able to work evenings and/or weekends Benefits: Medical, Dental, Vision Insurance 401K Retirement planning with Company Match Short-Term disability Insurance Paid Vacations Product discounts and More!Braum's is an equal opportunity employerA criminal background check and drug screening are required as part of the on-boarding process.If interested, please apply here. For questions, please call . Thank you!
Position: Route Maintenance Technician Hourly Compensation: $17.00 to $18.00/hr Location: Oklahoma City, OK Position Summary: This individual will utilize their experience to complete work order service requests in support of Store Operations. Must possess broad skills in various trades to perform minor electrical, plumbing, mechanical, building repairs and preventative maintenance. Duties include building and equipment repair, and project work relating to store sales initiatives. Schedule is Monday through Friday unless needed for other restaurant repair projects. Additionally, this position is responsible to support other Maintenance Technicians within their region. Electrical repair; Lamp changing, Ballast Replacement, Receptacle and Light switch replacement, Diagnostic Capability Plumbing Repair; Faucet and hand sprayer, urinal and toilet flush valves, above ground drain lines, filter changes, Diagnostic Capability. HVAC; Filter changes, Ventahood Belt Changes, Basic understanding of commercial equipment operation and maintenance procedures. Mechanical; Minor switch and element replacement. Basic Building Repair; painting, wall repair, floor repair, minor carpentry, etc. This position is expected to remain flexible in work scheduling to meet changing store objectives. Performs other duties as required. Minimum of 1 year experience High School Diploma or equivalent Must have good driving record Self-motivated, driven, honest, and dependable Physical ability to lift up to 50 lbs. Physical ability to climb ladders and work at high elevations Must be able to work evenings and/or weekends Benefits: Medical, Dental, Vision Insurance 401K Retirement planning with Company Match Short-Term disability Insurance Paid Vacations Product discounts and More!Braum's is an equal opportunity employerA criminal background check is required as part of the on-boarding process.If interested, please apply here or email resume to . For questions, please text or call . Thank you!
12/13/2025
Full time
Position: Route Maintenance Technician Hourly Compensation: $17.00 to $18.00/hr Location: Oklahoma City, OK Position Summary: This individual will utilize their experience to complete work order service requests in support of Store Operations. Must possess broad skills in various trades to perform minor electrical, plumbing, mechanical, building repairs and preventative maintenance. Duties include building and equipment repair, and project work relating to store sales initiatives. Schedule is Monday through Friday unless needed for other restaurant repair projects. Additionally, this position is responsible to support other Maintenance Technicians within their region. Electrical repair; Lamp changing, Ballast Replacement, Receptacle and Light switch replacement, Diagnostic Capability Plumbing Repair; Faucet and hand sprayer, urinal and toilet flush valves, above ground drain lines, filter changes, Diagnostic Capability. HVAC; Filter changes, Ventahood Belt Changes, Basic understanding of commercial equipment operation and maintenance procedures. Mechanical; Minor switch and element replacement. Basic Building Repair; painting, wall repair, floor repair, minor carpentry, etc. This position is expected to remain flexible in work scheduling to meet changing store objectives. Performs other duties as required. Minimum of 1 year experience High School Diploma or equivalent Must have good driving record Self-motivated, driven, honest, and dependable Physical ability to lift up to 50 lbs. Physical ability to climb ladders and work at high elevations Must be able to work evenings and/or weekends Benefits: Medical, Dental, Vision Insurance 401K Retirement planning with Company Match Short-Term disability Insurance Paid Vacations Product discounts and More!Braum's is an equal opportunity employerA criminal background check is required as part of the on-boarding process.If interested, please apply here or email resume to . For questions, please text or call . Thank you!
Position: Route Maintenance Technician Hourly Compensation: $17.00 to $18.00/hr Position Summary: Amarillo, TexasThis individual will utilize their experience to complete work order service requests in support of Store Operations. Must possess broad skills in various trades to perform minor electrical, plumbing, mechanical, building repairs and preventative maintenance. Duties include building and equipment repair, and project work relating to store sales initiatives. Schedule is Monday through Friday unless needed for other restaurant repair projects. Additionally, this position is responsible to support other Maintenance Technicians within their region. Electrical repair; Lamp changing, Ballast Replacement, Receptacle and Light switch replacement, Diagnostic Capability Plumbing Repair; Faucet and hand sprayer, urinal and toilet flush valves, above ground drain lines, filter changes, Diagnostic Capability. HVAC; Filter changes, Ventahood Belt Changes, Basic understanding of commercial equipment operation and maintenance procedures. Mechanical; Minor switch and element replacement. Basic Building Repair; painting, wall repair, floor repair, minor carpentry, etc. This position is expected to remain flexible in work scheduling to meet changing store objectives. Performs other duties as required. Minimum of 1 year experience High School Diploma or equivalent Must have good driving record Self-motivated, driven, honest, and dependable Physical ability to lift up to 50 lbs. Physical ability to climb ladders and work at high elevations Must be able to work evenings and/or weekends Benefits: Medical, Dental, Vision Insurance 401K Retirement planning with Company Match Short-Term disability Insurance Paid Vacations Product discounts and More!Braum's is an equal opportunity employerA criminal background check is required as part of the on-boarding process.If interested, please apply here or email resume to . For questions, please text or call . Thank you!
12/13/2025
Full time
Position: Route Maintenance Technician Hourly Compensation: $17.00 to $18.00/hr Position Summary: Amarillo, TexasThis individual will utilize their experience to complete work order service requests in support of Store Operations. Must possess broad skills in various trades to perform minor electrical, plumbing, mechanical, building repairs and preventative maintenance. Duties include building and equipment repair, and project work relating to store sales initiatives. Schedule is Monday through Friday unless needed for other restaurant repair projects. Additionally, this position is responsible to support other Maintenance Technicians within their region. Electrical repair; Lamp changing, Ballast Replacement, Receptacle and Light switch replacement, Diagnostic Capability Plumbing Repair; Faucet and hand sprayer, urinal and toilet flush valves, above ground drain lines, filter changes, Diagnostic Capability. HVAC; Filter changes, Ventahood Belt Changes, Basic understanding of commercial equipment operation and maintenance procedures. Mechanical; Minor switch and element replacement. Basic Building Repair; painting, wall repair, floor repair, minor carpentry, etc. This position is expected to remain flexible in work scheduling to meet changing store objectives. Performs other duties as required. Minimum of 1 year experience High School Diploma or equivalent Must have good driving record Self-motivated, driven, honest, and dependable Physical ability to lift up to 50 lbs. Physical ability to climb ladders and work at high elevations Must be able to work evenings and/or weekends Benefits: Medical, Dental, Vision Insurance 401K Retirement planning with Company Match Short-Term disability Insurance Paid Vacations Product discounts and More!Braum's is an equal opportunity employerA criminal background check is required as part of the on-boarding process.If interested, please apply here or email resume to . For questions, please text or call . Thank you!
About Arvum Senior Living Arvum Senior Living, proudly part of the Discovery Senior Living family of operating companies, manages care- and lifestyle-focused Assisted Living and Memory Care communities throughout the Midwest in Illinois, Iowa, Kansas, Missouri, and Wisconsin . Our company, which was built on our "Pillars of Excellence," employs hundreds of vital Team Members and is committed to providing a positive work environment and culture that recognizes their value in providing excellent care for our residents. Responsibilities : Supervises the maintenance of the buildings, grounds, security and mechanical assets of the Community. Responsible for the execution of all housekeeping, laundry and transportation services throughout the community in accordance with established guidelines in community policy and procedures. Responsible for the total operation and maintenance of the campus. Supervises the maintenance of Community buildings to the high standards of construction. Develops vendor relationships and negotiates contracts for maintenance services when appropriate. Conducts inspections on apartments prior to occupancy. May receive after hours calls for maintenance emergencies. Develops and implements a comprehensive preventative maintenance program and work order system. Plans, organizes, develops and leads the overall housekeeping/laundry operations in accordance with federal, state and local laws. Reviews monthly financial statements and implements plans of action for deficiencies. Processes and submits monthly expenses and budget data timely. Completes team member staffing and scheduling according to operational and budgetary guidelines. Ensures transportation vehicles are maintained in good working condition. Have vehicles regularly inspected to ensure safety and cleanliness. Oversees that all passengers are safely driven from community area to destination according to schedule. Qualifications: High School Diploma or Bachelors/Technical degree in related field. Four years maintenance supervision experience. HVAC experience or training. Working knowledge of machinery, tools, repair techniques, plumbing and related repair. Experience with electrical systems, phone systems, fire panels, emergency response systems and disaster preparedness. Proficient in Microsoft Office. Ability to handle multiple priorities. Provides leadership by exhibiting confidence in self and others; inspires and motivates others to perform well. Benefits: In addition to a rewarding career and competitive salary, Arvum offers a comprehensive benefit package. Eligible team members are offered a comprehensive benefit package including medical, dental, vision, life and disability insurances, paid time off and paid holidays. Team members are eligible to participate in our outstanding 401 k) plan with company match our Employee Assistance Program and accident insurance policies. No agencies, please. We do not accept any unsolicited resumes from agencies under any circumstances. We receive inquiries from agencies daily. Agencies should not direct any inquiries or emails to hiring managers. Thank you. EOE D/V
12/13/2025
Full time
About Arvum Senior Living Arvum Senior Living, proudly part of the Discovery Senior Living family of operating companies, manages care- and lifestyle-focused Assisted Living and Memory Care communities throughout the Midwest in Illinois, Iowa, Kansas, Missouri, and Wisconsin . Our company, which was built on our "Pillars of Excellence," employs hundreds of vital Team Members and is committed to providing a positive work environment and culture that recognizes their value in providing excellent care for our residents. Responsibilities : Supervises the maintenance of the buildings, grounds, security and mechanical assets of the Community. Responsible for the execution of all housekeeping, laundry and transportation services throughout the community in accordance with established guidelines in community policy and procedures. Responsible for the total operation and maintenance of the campus. Supervises the maintenance of Community buildings to the high standards of construction. Develops vendor relationships and negotiates contracts for maintenance services when appropriate. Conducts inspections on apartments prior to occupancy. May receive after hours calls for maintenance emergencies. Develops and implements a comprehensive preventative maintenance program and work order system. Plans, organizes, develops and leads the overall housekeeping/laundry operations in accordance with federal, state and local laws. Reviews monthly financial statements and implements plans of action for deficiencies. Processes and submits monthly expenses and budget data timely. Completes team member staffing and scheduling according to operational and budgetary guidelines. Ensures transportation vehicles are maintained in good working condition. Have vehicles regularly inspected to ensure safety and cleanliness. Oversees that all passengers are safely driven from community area to destination according to schedule. Qualifications: High School Diploma or Bachelors/Technical degree in related field. Four years maintenance supervision experience. HVAC experience or training. Working knowledge of machinery, tools, repair techniques, plumbing and related repair. Experience with electrical systems, phone systems, fire panels, emergency response systems and disaster preparedness. Proficient in Microsoft Office. Ability to handle multiple priorities. Provides leadership by exhibiting confidence in self and others; inspires and motivates others to perform well. Benefits: In addition to a rewarding career and competitive salary, Arvum offers a comprehensive benefit package. Eligible team members are offered a comprehensive benefit package including medical, dental, vision, life and disability insurances, paid time off and paid holidays. Team members are eligible to participate in our outstanding 401 k) plan with company match our Employee Assistance Program and accident insurance policies. No agencies, please. We do not accept any unsolicited resumes from agencies under any circumstances. We receive inquiries from agencies daily. Agencies should not direct any inquiries or emails to hiring managers. Thank you. EOE D/V
City/State Harrisonburg, VA Work Shift First (Days) Overview: Sentara Rockingham Memorial Hospital, located in Harrisonburg, VA, is hiring an HVAC Mechanic - Full Time Day schedule Overview The HVAC Mechanic is experienced in all phases of air conditioning, refrigeration, and heating. This individual inspects, repairs and maintains HVAC systems in addition to maintaining parts, supplies and equipment. They are responsible for following the operational and departmental guidelines and for meeting all regulatory and compliance requirements, e.g. OSHA. Education High School Diploma or Equivalent (Required) Trade School Graduate (Required) Post-secondary/vocational training in air conditioning, refrigeration, math, physics, chemistry, and basic mechanics (Preferred) Certification/Licensure Journeyman's license for Heating Vent and AC must be attained by the end of the first year of employment (Required) Driver's License (Required) Refrigerant Transition and Recovery Certification Type 2 (High-Pressure Appliances) (Required) Refrigerant Transition and Recovery Certification Type 1 (Small Appliances) (Required) Universal Certification (Preferred) Experience HVAC - 3 years (Required) Talroo - Allied Health, Monster air conditioning, refrigeration, heating . Benefits: Caring For Your Family and Your Career • Medical, Dental, Vision plans • Adoption, Fertility and Surrogacy Reimbursement up to $10,000 • Paid Time Off and Sick Leave • Paid Parental & Family Caregiver Leave • Emergency Backup Care • Long-Term, Short-Term Disability, and Critical Illness plans • Life Insurance • 401k/403B with Employer Match • Tuition Assistance - $5,250/year and discounted educational opportunities through Guild Education • Student Debt Pay Down - $10,000 • Reimbursement for certifications and free access to complete CEUs and professional development • Pet Insurance • Legal Resources Plan • Colleagues may have the opportunity to earn an annual discretionary bonus if established system and employee eligibility criteria is met Sentara RMH Medical Center , a Magnet designated hospital located in Harrisonburg VA, serves a seven-county area with a population of 218,000 residents, employing 2600 locals. The 238-bed community hospital has been serving Harrisonburg, Rockingham County and surrounding areas since 1912, then partnered with the Sentara Health System in May of 2011. Sentara RMH features the RMH Hahn Cancer Center, a state-of-the-art center equipped with the latest cancer fighting technologies available in the nation administrating more than 18,000 cancer treatments. With 1800 delivered babies, 60,000 emergency patients and 21,000 surgical procedures, Sentara has a position for you. We improve health every day, come be a part of the community. Our Caring Workplace Environment •A Caring Commitment serving our community for 100+ years •Free and convenient parking •Collaboration and shared governance •CMS 5-Star and Magnet designated hospital •EAP - 24 x 7 Sentara Health is an equal opportunity employer and prides itself on the diversity and inclusiveness of its close to an almost 30,000-member workforce. Diversity, inclusion, and belonging is a guiding principle of the organization to ensure its workforce reflects the communities it serves. In support of our mission "to improve health every day," this is a tobacco-free environment. For positions that are available as remote work, Sentara Health employs associates in the following states: Alabama, Delaware, Florida, Georgia, Idaho, Indiana, Kansas, Louisiana, Maine, Maryland, Minnesota, Nebraska, Nevada, New Hampshire, North Carolina, North Dakota, Ohio, Oklahoma, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, Washington, West Virginia, Wisconsin, and Wyoming.
12/13/2025
Full time
City/State Harrisonburg, VA Work Shift First (Days) Overview: Sentara Rockingham Memorial Hospital, located in Harrisonburg, VA, is hiring an HVAC Mechanic - Full Time Day schedule Overview The HVAC Mechanic is experienced in all phases of air conditioning, refrigeration, and heating. This individual inspects, repairs and maintains HVAC systems in addition to maintaining parts, supplies and equipment. They are responsible for following the operational and departmental guidelines and for meeting all regulatory and compliance requirements, e.g. OSHA. Education High School Diploma or Equivalent (Required) Trade School Graduate (Required) Post-secondary/vocational training in air conditioning, refrigeration, math, physics, chemistry, and basic mechanics (Preferred) Certification/Licensure Journeyman's license for Heating Vent and AC must be attained by the end of the first year of employment (Required) Driver's License (Required) Refrigerant Transition and Recovery Certification Type 2 (High-Pressure Appliances) (Required) Refrigerant Transition and Recovery Certification Type 1 (Small Appliances) (Required) Universal Certification (Preferred) Experience HVAC - 3 years (Required) Talroo - Allied Health, Monster air conditioning, refrigeration, heating . Benefits: Caring For Your Family and Your Career • Medical, Dental, Vision plans • Adoption, Fertility and Surrogacy Reimbursement up to $10,000 • Paid Time Off and Sick Leave • Paid Parental & Family Caregiver Leave • Emergency Backup Care • Long-Term, Short-Term Disability, and Critical Illness plans • Life Insurance • 401k/403B with Employer Match • Tuition Assistance - $5,250/year and discounted educational opportunities through Guild Education • Student Debt Pay Down - $10,000 • Reimbursement for certifications and free access to complete CEUs and professional development • Pet Insurance • Legal Resources Plan • Colleagues may have the opportunity to earn an annual discretionary bonus if established system and employee eligibility criteria is met Sentara RMH Medical Center , a Magnet designated hospital located in Harrisonburg VA, serves a seven-county area with a population of 218,000 residents, employing 2600 locals. The 238-bed community hospital has been serving Harrisonburg, Rockingham County and surrounding areas since 1912, then partnered with the Sentara Health System in May of 2011. Sentara RMH features the RMH Hahn Cancer Center, a state-of-the-art center equipped with the latest cancer fighting technologies available in the nation administrating more than 18,000 cancer treatments. With 1800 delivered babies, 60,000 emergency patients and 21,000 surgical procedures, Sentara has a position for you. We improve health every day, come be a part of the community. Our Caring Workplace Environment •A Caring Commitment serving our community for 100+ years •Free and convenient parking •Collaboration and shared governance •CMS 5-Star and Magnet designated hospital •EAP - 24 x 7 Sentara Health is an equal opportunity employer and prides itself on the diversity and inclusiveness of its close to an almost 30,000-member workforce. Diversity, inclusion, and belonging is a guiding principle of the organization to ensure its workforce reflects the communities it serves. In support of our mission "to improve health every day," this is a tobacco-free environment. For positions that are available as remote work, Sentara Health employs associates in the following states: Alabama, Delaware, Florida, Georgia, Idaho, Indiana, Kansas, Louisiana, Maine, Maryland, Minnesota, Nebraska, Nevada, New Hampshire, North Carolina, North Dakota, Ohio, Oklahoma, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, Washington, West Virginia, Wisconsin, and Wyoming.
Overview: To direct, oversee and coordinate all phases of maintenance and construction at Worlds of Fun, Oceans of Fun and Worlds of Fun Village including mechanical, electrical, HVAC, landscaping, electronic, carpentry, painting, fiberglassing, and plumbing. Responsibilities: -Participates in long-term construction planning for new park projects. Oversees all construction projects. Negotiates contracts for, schedules and coordinates contractors, engineers and architects supplying services and/or materials to ensure completion of maintenance and construction projects on time and within budget. Helps establish scope of work and makes sure contractors provide the required work in a timely manner. Coordinates details of construction projects with the directors and/or managers of other departments as appropriate. Works with Cedar Fair Corporate to make sure that projects are completed on time, on budget and as designed. -Oversees and participates in the selection, training, scheduling and supervision of all Maintenance employees to make sure they are knowledgeable of and proficient in proper procedures including those involving safety issues. Ensures strict compliance with all federal, state and municipal labor laws as well as with any collective bargaining agreement(s) in force. -Manages employee performance utilizing all appropriate means including training, coaching, counseling and performance management. Addresses and fairly resolves employee problems including union grievances within the frameworks of the collective bargaining agreement and company policies. Participates in collective bargaining agreement negotiations. -Communicates division status to Vice President & General Manager on an ongoing basis, including operational issues, employee concerns, guest complaints, special requests, losses and any other unusual situations in order to maintain smooth operations. -Directs and participates in the the preparation of all labor, operating expense, capital and EWO budgets for the division. Monitors financial reports regularly and takes corrective action when needed. -Regularly and accurately reports to management the status of all projects being supervised. -Communicates with manufacturers and other outside vendors to resolve difficulties and to ensure the safest possible operation and maintenance of rides, attractions and equipment. Communicates with Cedar Fair Safety/Engineering on ride-related issues and to provide needed assistance. Researches, bids and oversees the procurement of materials and/or services involved in maintenance and construction projects. -Interfaces with (and may act as the Worlds of Fun representative with) various governmental agencies on a routine basis to ensure park's compliance with federal, state and local laws and regulations. These agencies include OSHA, EPA, Missouri Department of Natural Resources, and the Missouri Fire Safety Department, as well as the KCMO Planning & Development and Public Health Departments. -Develops and implements a plan to ensure that all park property, facilities, rides, landscape, and equipment are installed, maintained and, when necessary, repaired in a safe, reliable and cost effective manner. This includes: inspecting all areas of the parks to identify issues determining priorities determining materials needed and negotiating purchase terms assigning schedules selecting outside contractors Installing a preventative/predictive maintenance system so that safety and uptime are maximized. Ensuring the parts warehouse has the proper inventory levels. Establishing min/max levels to those parts inventories to maximize uptime. Ensuring all maintenance employees are properly trained to perform maintenance on the rides. This includes specialization, preventative maintenance and timely repairs of good quality. Qualifications: Strong interpersonal, verbal and written communication and analytic skills. Demonstrated mental and emotional capability to make sound decisions quickly during emergency situations. B.A. Engineering, Sciences, or Project Management 6-10 years of experience in theme/amusement/water park maintenance Extensive knowledge and understanding of electrical, mechanical, and structural maintenance including applicable codes Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law. Ability to work nights, weekends and holiday periods to meet business needs. Driver's License
12/13/2025
Full time
Overview: To direct, oversee and coordinate all phases of maintenance and construction at Worlds of Fun, Oceans of Fun and Worlds of Fun Village including mechanical, electrical, HVAC, landscaping, electronic, carpentry, painting, fiberglassing, and plumbing. Responsibilities: -Participates in long-term construction planning for new park projects. Oversees all construction projects. Negotiates contracts for, schedules and coordinates contractors, engineers and architects supplying services and/or materials to ensure completion of maintenance and construction projects on time and within budget. Helps establish scope of work and makes sure contractors provide the required work in a timely manner. Coordinates details of construction projects with the directors and/or managers of other departments as appropriate. Works with Cedar Fair Corporate to make sure that projects are completed on time, on budget and as designed. -Oversees and participates in the selection, training, scheduling and supervision of all Maintenance employees to make sure they are knowledgeable of and proficient in proper procedures including those involving safety issues. Ensures strict compliance with all federal, state and municipal labor laws as well as with any collective bargaining agreement(s) in force. -Manages employee performance utilizing all appropriate means including training, coaching, counseling and performance management. Addresses and fairly resolves employee problems including union grievances within the frameworks of the collective bargaining agreement and company policies. Participates in collective bargaining agreement negotiations. -Communicates division status to Vice President & General Manager on an ongoing basis, including operational issues, employee concerns, guest complaints, special requests, losses and any other unusual situations in order to maintain smooth operations. -Directs and participates in the the preparation of all labor, operating expense, capital and EWO budgets for the division. Monitors financial reports regularly and takes corrective action when needed. -Regularly and accurately reports to management the status of all projects being supervised. -Communicates with manufacturers and other outside vendors to resolve difficulties and to ensure the safest possible operation and maintenance of rides, attractions and equipment. Communicates with Cedar Fair Safety/Engineering on ride-related issues and to provide needed assistance. Researches, bids and oversees the procurement of materials and/or services involved in maintenance and construction projects. -Interfaces with (and may act as the Worlds of Fun representative with) various governmental agencies on a routine basis to ensure park's compliance with federal, state and local laws and regulations. These agencies include OSHA, EPA, Missouri Department of Natural Resources, and the Missouri Fire Safety Department, as well as the KCMO Planning & Development and Public Health Departments. -Develops and implements a plan to ensure that all park property, facilities, rides, landscape, and equipment are installed, maintained and, when necessary, repaired in a safe, reliable and cost effective manner. This includes: inspecting all areas of the parks to identify issues determining priorities determining materials needed and negotiating purchase terms assigning schedules selecting outside contractors Installing a preventative/predictive maintenance system so that safety and uptime are maximized. Ensuring the parts warehouse has the proper inventory levels. Establishing min/max levels to those parts inventories to maximize uptime. Ensuring all maintenance employees are properly trained to perform maintenance on the rides. This includes specialization, preventative maintenance and timely repairs of good quality. Qualifications: Strong interpersonal, verbal and written communication and analytic skills. Demonstrated mental and emotional capability to make sound decisions quickly during emergency situations. B.A. Engineering, Sciences, or Project Management 6-10 years of experience in theme/amusement/water park maintenance Extensive knowledge and understanding of electrical, mechanical, and structural maintenance including applicable codes Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law. Ability to work nights, weekends and holiday periods to meet business needs. Driver's License
Overview: To direct, oversee and coordinate all phases of maintenance and construction at Worlds of Fun, Oceans of Fun and Worlds of Fun Village including mechanical, electrical, HVAC, landscaping, electronic, carpentry, painting, fiberglassing, and plumbing. Responsibilities: -Participates in long-term construction planning for new park projects. Oversees all construction projects. Negotiates contracts for, schedules and coordinates contractors, engineers and architects supplying services and/or materials to ensure completion of maintenance and construction projects on time and within budget. Helps establish scope of work and makes sure contractors provide the required work in a timely manner. Coordinates details of construction projects with the directors and/or managers of other departments as appropriate. Works with Cedar Fair Corporate to make sure that projects are completed on time, on budget and as designed. -Oversees and participates in the selection, training, scheduling and supervision of all Maintenance employees to make sure they are knowledgeable of and proficient in proper procedures including those involving safety issues. Ensures strict compliance with all federal, state and municipal labor laws as well as with any collective bargaining agreement(s) in force. -Manages employee performance utilizing all appropriate means including training, coaching, counseling and performance management. Addresses and fairly resolves employee problems including union grievances within the frameworks of the collective bargaining agreement and company policies. Participates in collective bargaining agreement negotiations. -Communicates division status to Vice President & General Manager on an ongoing basis, including operational issues, employee concerns, guest complaints, special requests, losses and any other unusual situations in order to maintain smooth operations. -Directs and participates in the the preparation of all labor, operating expense, capital and EWO budgets for the division. Monitors financial reports regularly and takes corrective action when needed. -Regularly and accurately reports to management the status of all projects being supervised. -Communicates with manufacturers and other outside vendors to resolve difficulties and to ensure the safest possible operation and maintenance of rides, attractions and equipment. Communicates with Cedar Fair Safety/Engineering on ride-related issues and to provide needed assistance. Researches, bids and oversees the procurement of materials and/or services involved in maintenance and construction projects. -Interfaces with (and may act as the Worlds of Fun representative with) various governmental agencies on a routine basis to ensure park's compliance with federal, state and local laws and regulations. These agencies include OSHA, EPA, Missouri Department of Natural Resources, and the Missouri Fire Safety Department, as well as the KCMO Planning & Development and Public Health Departments. -Develops and implements a plan to ensure that all park property, facilities, rides, landscape, and equipment are installed, maintained and, when necessary, repaired in a safe, reliable and cost effective manner. This includes: inspecting all areas of the parks to identify issues determining priorities determining materials needed and negotiating purchase terms assigning schedules selecting outside contractors Installing a preventative/predictive maintenance system so that safety and uptime are maximized. Ensuring the parts warehouse has the proper inventory levels. Establishing min/max levels to those parts inventories to maximize uptime. Ensuring all maintenance employees are properly trained to perform maintenance on the rides. This includes specialization, preventative maintenance and timely repairs of good quality. Qualifications: Strong interpersonal, verbal and written communication and analytic skills. Demonstrated mental and emotional capability to make sound decisions quickly during emergency situations. B.A. Engineering, Sciences, or Project Management 6-10 years of experience in theme/amusement/water park maintenance Extensive knowledge and understanding of electrical, mechanical, and structural maintenance including applicable codes Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law. Ability to work nights, weekends and holiday periods to meet business needs. Driver's License
12/13/2025
Full time
Overview: To direct, oversee and coordinate all phases of maintenance and construction at Worlds of Fun, Oceans of Fun and Worlds of Fun Village including mechanical, electrical, HVAC, landscaping, electronic, carpentry, painting, fiberglassing, and plumbing. Responsibilities: -Participates in long-term construction planning for new park projects. Oversees all construction projects. Negotiates contracts for, schedules and coordinates contractors, engineers and architects supplying services and/or materials to ensure completion of maintenance and construction projects on time and within budget. Helps establish scope of work and makes sure contractors provide the required work in a timely manner. Coordinates details of construction projects with the directors and/or managers of other departments as appropriate. Works with Cedar Fair Corporate to make sure that projects are completed on time, on budget and as designed. -Oversees and participates in the selection, training, scheduling and supervision of all Maintenance employees to make sure they are knowledgeable of and proficient in proper procedures including those involving safety issues. Ensures strict compliance with all federal, state and municipal labor laws as well as with any collective bargaining agreement(s) in force. -Manages employee performance utilizing all appropriate means including training, coaching, counseling and performance management. Addresses and fairly resolves employee problems including union grievances within the frameworks of the collective bargaining agreement and company policies. Participates in collective bargaining agreement negotiations. -Communicates division status to Vice President & General Manager on an ongoing basis, including operational issues, employee concerns, guest complaints, special requests, losses and any other unusual situations in order to maintain smooth operations. -Directs and participates in the the preparation of all labor, operating expense, capital and EWO budgets for the division. Monitors financial reports regularly and takes corrective action when needed. -Regularly and accurately reports to management the status of all projects being supervised. -Communicates with manufacturers and other outside vendors to resolve difficulties and to ensure the safest possible operation and maintenance of rides, attractions and equipment. Communicates with Cedar Fair Safety/Engineering on ride-related issues and to provide needed assistance. Researches, bids and oversees the procurement of materials and/or services involved in maintenance and construction projects. -Interfaces with (and may act as the Worlds of Fun representative with) various governmental agencies on a routine basis to ensure park's compliance with federal, state and local laws and regulations. These agencies include OSHA, EPA, Missouri Department of Natural Resources, and the Missouri Fire Safety Department, as well as the KCMO Planning & Development and Public Health Departments. -Develops and implements a plan to ensure that all park property, facilities, rides, landscape, and equipment are installed, maintained and, when necessary, repaired in a safe, reliable and cost effective manner. This includes: inspecting all areas of the parks to identify issues determining priorities determining materials needed and negotiating purchase terms assigning schedules selecting outside contractors Installing a preventative/predictive maintenance system so that safety and uptime are maximized. Ensuring the parts warehouse has the proper inventory levels. Establishing min/max levels to those parts inventories to maximize uptime. Ensuring all maintenance employees are properly trained to perform maintenance on the rides. This includes specialization, preventative maintenance and timely repairs of good quality. Qualifications: Strong interpersonal, verbal and written communication and analytic skills. Demonstrated mental and emotional capability to make sound decisions quickly during emergency situations. B.A. Engineering, Sciences, or Project Management 6-10 years of experience in theme/amusement/water park maintenance Extensive knowledge and understanding of electrical, mechanical, and structural maintenance including applicable codes Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law. Ability to work nights, weekends and holiday periods to meet business needs. Driver's License
What's the role? Reporting to the Manager of Facility Services, the Building Automation Systems (BAS) Technician's primary objective is to ensure the safety and security of personnel and property at Northwestern Mutual. Day-to-day responsibilities include testing, installing, maintaining, and repairing the electronic security, surveillance, automation, and life safety systems within the building complex. The BAS Technician writes and inputs programs for the building automation control systems and actively participates in special projects, from design to installation. Your experience with fire alarm systems or controllers, technically savvy nature, effective problem-solving skills, and customer service mentality will be critical as you partner cross-departmentally and immerse yourself in a variety of areas and opportunities. We look forward to hearing about your motivation to contribute to a broader purpose with a team that encourages individual and professional development. Primary Duties and Responsibilities: (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. Bring Your Best! What this role needs: Requirements : Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Excellent analytical, problem solving, and documentation skills. Excellent analytical, problem solving, and documentation skills. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Ability to work at heights, on ladders, scaffolding and lifts. Ability to work at heights, on ladders, scaffolding and lifts. Must be able to work overtime when required. Must be able to work overtime when required. Technical Requirements : Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Certification Requirements: Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) . click apply for full job details
12/13/2025
Full time
What's the role? Reporting to the Manager of Facility Services, the Building Automation Systems (BAS) Technician's primary objective is to ensure the safety and security of personnel and property at Northwestern Mutual. Day-to-day responsibilities include testing, installing, maintaining, and repairing the electronic security, surveillance, automation, and life safety systems within the building complex. The BAS Technician writes and inputs programs for the building automation control systems and actively participates in special projects, from design to installation. Your experience with fire alarm systems or controllers, technically savvy nature, effective problem-solving skills, and customer service mentality will be critical as you partner cross-departmentally and immerse yourself in a variety of areas and opportunities. We look forward to hearing about your motivation to contribute to a broader purpose with a team that encourages individual and professional development. Primary Duties and Responsibilities: (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. Bring Your Best! What this role needs: Requirements : Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Excellent analytical, problem solving, and documentation skills. Excellent analytical, problem solving, and documentation skills. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Ability to work at heights, on ladders, scaffolding and lifts. Ability to work at heights, on ladders, scaffolding and lifts. Must be able to work overtime when required. Must be able to work overtime when required. Technical Requirements : Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Certification Requirements: Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) . click apply for full job details
What's the role? Reporting to the Manager of Facility Services, the Building Automation Systems (BAS) Technician's primary objective is to ensure the safety and security of personnel and property at Northwestern Mutual. Day-to-day responsibilities include testing, installing, maintaining, and repairing the electronic security, surveillance, automation, and life safety systems within the building complex. The BAS Technician writes and inputs programs for the building automation control systems and actively participates in special projects, from design to installation. Your experience with fire alarm systems or controllers, technically savvy nature, effective problem-solving skills, and customer service mentality will be critical as you partner cross-departmentally and immerse yourself in a variety of areas and opportunities. We look forward to hearing about your motivation to contribute to a broader purpose with a team that encourages individual and professional development. Primary Duties and Responsibilities: (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. Bring Your Best! What this role needs: Requirements : Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Excellent analytical, problem solving, and documentation skills. Excellent analytical, problem solving, and documentation skills. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Ability to work at heights, on ladders, scaffolding and lifts. Ability to work at heights, on ladders, scaffolding and lifts. Must be able to work overtime when required. Must be able to work overtime when required. Technical Requirements : Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Certification Requirements: Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) . click apply for full job details
12/13/2025
Full time
What's the role? Reporting to the Manager of Facility Services, the Building Automation Systems (BAS) Technician's primary objective is to ensure the safety and security of personnel and property at Northwestern Mutual. Day-to-day responsibilities include testing, installing, maintaining, and repairing the electronic security, surveillance, automation, and life safety systems within the building complex. The BAS Technician writes and inputs programs for the building automation control systems and actively participates in special projects, from design to installation. Your experience with fire alarm systems or controllers, technically savvy nature, effective problem-solving skills, and customer service mentality will be critical as you partner cross-departmentally and immerse yourself in a variety of areas and opportunities. We look forward to hearing about your motivation to contribute to a broader purpose with a team that encourages individual and professional development. Primary Duties and Responsibilities: (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (40%) Performs ongoing preventive maintenance of the automation systems, BMCS (building management & control systems), life safety systems, security systems and surveillance systems. Maintains Building Automation System's LAN network, including but not limited to workstations, networking cables, servers and access points. Tests these systems for proper operation, diagnoses and analyzes test results and makes appropriate adjustments, modifications or replacement of electronic or electromechanical and related hardware as required. Uses technical and working knowledge of electricity, electronics and software programming to troubleshoot and repair the above-mentioned systems. Assists in the planning sequence and/or method in which the electronic maintenance and repair is completed. Responsible for ordering electronic equipment and maintaining an inventory of parts. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (30%) Creates changes, reevaluates programming language for building automation system and other equipment using software. Maintains complete and current documentation for all changes to the systems and informs the system's users of changes and how they affect daily operations. Maintains software back up of automated building system processors. Recommends system enhancements and expedites their implementation. Programs automation systems to fulfill the operational needs of the facility staff and assists them in understanding programming options. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Installs electronic equipment and associated hardware in accordance with various codes such as National Safety Code, NFPA Joint Industrial Conference standards, NICET and National, State and Local electrical codes. Designs, builds and installs control circuits used to enhance existing security, surveillance, life safety, HVAC and automation systems. Serves as a resource to building services and security staff in the operations of said equipment. Performs maintenance and installation on other electronic equipment i.e. two-way radios, fitness equipment and digital recording systems. Creates updates and builds schematics and wiring diagrams as required. Disables and removes obsolete electronic equipment and support wiring. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. (15%) Plays an integral role in the development and implementation of various building projects. Responsible for researching best practices while incorporating safety and regulatory issues involving building automation, life safety and security systems. Responsible for scheduling, collaboration and supervising service contractors and expediting progress and completion of projects. Responsible for the maintenance of the building automation database in respect to the ongoing needs of the organization. Instrumental in development of related databases and the importing/exporting of data to other company software systems. Bring Your Best! What this role needs: Requirements : Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Associate's degree in Electronics with 3+ years of proven experience with installation, programming and maintenance of building automation systems (preferably Honeywell and Johnson Controls) or an equivalent combination of education and experience required. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to read building blueprints and schematics, along with advanced knowledge of relevant state and local building codes and standards. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Ability to work with minimal supervision and have a proven track record of effective independent decision-making. Excellent analytical, problem solving, and documentation skills. Excellent analytical, problem solving, and documentation skills. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Strong customer focus, initiative, accuracy, and effective organizational and communication skills. Responsiveness to customer requests and effective communication. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Proven ability to work independently or as part of a team and to adapt to changing priorities; a track record of consistently good attendance. Ability to work at heights, on ladders, scaffolding and lifts. Ability to work at heights, on ladders, scaffolding and lifts. Must be able to work overtime when required. Must be able to work overtime when required. Technical Requirements : Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Working knowledge of the hardware and software components of a PC, as well as basic data networking concepts. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Demonstrated proficiency in common PC functions and applications, such as Microsoft Windows file systems, Outlook, Office, Internet Explorer, etc. Certification Requirements: Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) Strongly Preferred: NICET Certification in Fire Alarm Systems Level 1 (required to be obtained within 1 year of employment) . click apply for full job details
Job Profile Summary: (1) 2nd & (1) 3rd Shift in Milwaukee HVAC/Boiler Building Systems Engineer will work as part of a team that services, operates, maintains and repairs heating, ventilating, air conditioning, refrigeration, plumbing, steam, boilers, commercial kitchen equipment and other mechanical building systems at Northwestern Mutual facilities to ensure the security and safety of personnel and property. The incumbent will be part of a team that provides continual coverage to support the required environment for critical data center functions is maintained through proper operation of all related HVAC building systems. Working with internal teams and external vendors, you will identify, troubleshoot, isolate and repair failures in HVAC and building systems. This role includes special projects from design through installation, researching best practices while incorporating safety and regulatory issues. Will schedule and monitor progress and completion of installation and maintenance work performed by service contractors on various HVAC building systems. Skills Required: Maintenance, Troubleshooting, Repair Testing building systems. Maintains and repairs problems associated with various plumbing systems including domestic water supply and water management devices such as drains, pumps, and fire protection. Investigates and resolves reports of leaks, clogs, etc. and performs minor or emergency plumbing repairs. Assists with maintaining and testing fire protection, emergency generators and life safety equipment. Responds to data center fire protection system emergencies. Performs maintenance and repairs on different types of kitchen equipment, including testing and repairing the control system components relating to refrigeration, cooking and exhaust. Performs or oversees preventative maintenance and repairs on elevators, escalators, fitness Center equipment, and various other miscellaneous systems and equipment or coordinates the activity of external vendors. Repairs various equipment utilizing welding and other metal fabrication skills. Maintenance, Troubleshooting, Repair Testing HVAC/Boiler systems. Maintains all chillers, booster and circulating pumps, cooling towers, and related HVAC equipment. Responds to system failures and related emergencies and rectifies the cause as appropriate. Monitor Operation HVAC/Boiler systems. Monitors HVAC systems via automated building control systems to ensure proper operation. Adjusts the air handling units to provide the most efficient mode of operation while maintaining comfort limits. Determines system run schedules and alarm points for building automation system. Advises and recommends software programming changes relating to mechanical systems to the Building Automation Systems Technician. Monitors Variable Frequency Drives for pumps and air handling units and water treatment systems and overrides or adjusts as necessary. Ensures the operation and maintenance of Auto Flame High-Pressure Boiler Control system and associated equipment. Responds to calls from WE Energies to shed natural gas usage load. Projects Administration Ability to assess service contracts to ensure contractual obligations are fulfilled. Serves on Relocation Team to assess impact and coordinate completion of relocation-related HVAC activity. As a member of the Emergency Response Team, assists with routine medical situations, building evacuations and monitoring of severe weather conditions to assure the safety of employees and visitors. Maintains prints and documentation relating to related systems and Business Resumption Plans. Ensures, proper inventory levels of parts, tools, and materials. Researches catalogs, Internet, and vendors for parts and supplies necessary for repairs and new installations. Completes requisition forms for parts, tools, and materials necessary for preventative and emergency maintenance. Job Requirements: Associates Degree in HVAC or graduate of state approved Plumbing or HVAC-related apprenticeship program and a minimum of three years of industrial HVAC systems experience required. Will consider candidates who possess HVAC-related certification and 5 or more years of related job experience. NIULPE Fourth Class or ASOPE Second Class High Pressure Boiler certification is required within one year of employment. Certified Refrigerant Handling Technician required within 3 months of employment. Certification from the WI Dept of Commerce for Cross Connection Control Tester Registration must be obtained within 2 years of employment. Proven mechanical aptitude required. Ability to read and understand blueprints and schematic drawings, updating them as appropriate. Must possess an advanced knowledge of relevant state and local building codes and industry standards. Knowledge of work-related OSHA (Occupational Safety and Health Act) regulations including MSD (Material Safety Data) and Confined Space Entry desirable. Trained in the proper handling and use of hazardous or corrosive chemicals used in water treatment. OSHA 10 General Industry motorized lift training must be obtained within 1 year of employment. Member of the Emergency Response Team (ERT), must maintain CPR/1st Aid/AED (defibrillator) certification; must be obtained within first 6 months on the job. Strong comprehensive knowledge and ability to operate automated building control systems (e.g. Honeywell EBI or Johnson Controls Metasys). Ability to work from a computerized maintenance management system such as FMS. Must demonstrate proficiency in Microsoft products. Strong customer focus, initiative, accuracy and problem-solving skills; effective organizational and communication skills along with the ability to work independently or as part of a team and to adapt to changing priorities and meet required timeframes. This job is part of a group of jobs considered essential services. All essential services employees are expected to make every reasonable effort possible to report for work or remain working their shift, even during inclement weather conditions and emergency situations. Must be able to work overtime and weekends when required, and emergency call ins. Must be able to perform the essential physical requirements of the position. Constantly wear or lift 12 lb. tool belt and various parts up to 20 lbs. Up to 33% of the time, lift 35 lb. chain hoist, 35 lb. eight-foot ladder, chemicals/salt bags and other equipment up to 50 lbs. from 2 to 30 feet. Up to 33% of time, lift pipes, machine units, motors, valves, tank that weight up to 80 lbs. No more than 80 lbs. lifted by one person; if more than 80 lbs, use human or mechanical assistance. Up to 33% of time, push light objects with 15 lbs. of force. Up to 33% of time, push objects such as storage scaffold, sand bags, hose reels, valves, canister of refrigerant with up to 70 lbs. of force. Up to 33% of time, push objects such as cart on wheels of pipes onto elevator requiring 23 lbs. of force. Up to 33% of time, push objects such as chain hoist up or down inclines or ramps requiring 54 lbs. of force or high-rise lift with 65 lbs. of force. Always use two people to push cougar lift. Up to 33% of the time, use foot to operate the sheet metal bender. Up to 33% of time, pull light objects with 16 lbs. of force. Up to 33% of time, pull objects such as storage scaffold, sandbags, hose reels, valves, canister of refrigerant with up to 52 lbs. of force. Up to 33% of time, push objects such as cart on wheels of pipes onto elevator requiring 34 lbs. of force. Up to 33% of time, push objects such as chain hoist up or down inclines or ramps requiring 110 lbs. of force, or high-rise lift with 110 lbs. of force. Maximum carry is 50 lbs less than 10 feet on smooth (hallways) and rough terrain (roof). Recommend carts to carry salt bags. Typical work environment has minimal to moderate noise levels, however, infrequently exposed to very loud noise high velocity air (CFMs). Candidates must successfully complete and pass any required testing. Compensation Range: Pay Range - Start: $29.53 Pay Range - End: $44.29 Geographic Specific Pay Structure: Structure 110: Structure 115: We believe in fairness and transparency. It's why we share the salary range for most of our roles. However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process. The standard pay structure is listed but if you're living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more. Grow your career with a best-in-class company that puts our clients' interests at the center of all we do. Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce. We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives. . click apply for full job details
12/13/2025
Full time
Job Profile Summary: (1) 2nd & (1) 3rd Shift in Milwaukee HVAC/Boiler Building Systems Engineer will work as part of a team that services, operates, maintains and repairs heating, ventilating, air conditioning, refrigeration, plumbing, steam, boilers, commercial kitchen equipment and other mechanical building systems at Northwestern Mutual facilities to ensure the security and safety of personnel and property. The incumbent will be part of a team that provides continual coverage to support the required environment for critical data center functions is maintained through proper operation of all related HVAC building systems. Working with internal teams and external vendors, you will identify, troubleshoot, isolate and repair failures in HVAC and building systems. This role includes special projects from design through installation, researching best practices while incorporating safety and regulatory issues. Will schedule and monitor progress and completion of installation and maintenance work performed by service contractors on various HVAC building systems. Skills Required: Maintenance, Troubleshooting, Repair Testing building systems. Maintains and repairs problems associated with various plumbing systems including domestic water supply and water management devices such as drains, pumps, and fire protection. Investigates and resolves reports of leaks, clogs, etc. and performs minor or emergency plumbing repairs. Assists with maintaining and testing fire protection, emergency generators and life safety equipment. Responds to data center fire protection system emergencies. Performs maintenance and repairs on different types of kitchen equipment, including testing and repairing the control system components relating to refrigeration, cooking and exhaust. Performs or oversees preventative maintenance and repairs on elevators, escalators, fitness Center equipment, and various other miscellaneous systems and equipment or coordinates the activity of external vendors. Repairs various equipment utilizing welding and other metal fabrication skills. Maintenance, Troubleshooting, Repair Testing HVAC/Boiler systems. Maintains all chillers, booster and circulating pumps, cooling towers, and related HVAC equipment. Responds to system failures and related emergencies and rectifies the cause as appropriate. Monitor Operation HVAC/Boiler systems. Monitors HVAC systems via automated building control systems to ensure proper operation. Adjusts the air handling units to provide the most efficient mode of operation while maintaining comfort limits. Determines system run schedules and alarm points for building automation system. Advises and recommends software programming changes relating to mechanical systems to the Building Automation Systems Technician. Monitors Variable Frequency Drives for pumps and air handling units and water treatment systems and overrides or adjusts as necessary. Ensures the operation and maintenance of Auto Flame High-Pressure Boiler Control system and associated equipment. Responds to calls from WE Energies to shed natural gas usage load. Projects Administration Ability to assess service contracts to ensure contractual obligations are fulfilled. Serves on Relocation Team to assess impact and coordinate completion of relocation-related HVAC activity. As a member of the Emergency Response Team, assists with routine medical situations, building evacuations and monitoring of severe weather conditions to assure the safety of employees and visitors. Maintains prints and documentation relating to related systems and Business Resumption Plans. Ensures, proper inventory levels of parts, tools, and materials. Researches catalogs, Internet, and vendors for parts and supplies necessary for repairs and new installations. Completes requisition forms for parts, tools, and materials necessary for preventative and emergency maintenance. Job Requirements: Associates Degree in HVAC or graduate of state approved Plumbing or HVAC-related apprenticeship program and a minimum of three years of industrial HVAC systems experience required. Will consider candidates who possess HVAC-related certification and 5 or more years of related job experience. NIULPE Fourth Class or ASOPE Second Class High Pressure Boiler certification is required within one year of employment. Certified Refrigerant Handling Technician required within 3 months of employment. Certification from the WI Dept of Commerce for Cross Connection Control Tester Registration must be obtained within 2 years of employment. Proven mechanical aptitude required. Ability to read and understand blueprints and schematic drawings, updating them as appropriate. Must possess an advanced knowledge of relevant state and local building codes and industry standards. Knowledge of work-related OSHA (Occupational Safety and Health Act) regulations including MSD (Material Safety Data) and Confined Space Entry desirable. Trained in the proper handling and use of hazardous or corrosive chemicals used in water treatment. OSHA 10 General Industry motorized lift training must be obtained within 1 year of employment. Member of the Emergency Response Team (ERT), must maintain CPR/1st Aid/AED (defibrillator) certification; must be obtained within first 6 months on the job. Strong comprehensive knowledge and ability to operate automated building control systems (e.g. Honeywell EBI or Johnson Controls Metasys). Ability to work from a computerized maintenance management system such as FMS. Must demonstrate proficiency in Microsoft products. Strong customer focus, initiative, accuracy and problem-solving skills; effective organizational and communication skills along with the ability to work independently or as part of a team and to adapt to changing priorities and meet required timeframes. This job is part of a group of jobs considered essential services. All essential services employees are expected to make every reasonable effort possible to report for work or remain working their shift, even during inclement weather conditions and emergency situations. Must be able to work overtime and weekends when required, and emergency call ins. Must be able to perform the essential physical requirements of the position. Constantly wear or lift 12 lb. tool belt and various parts up to 20 lbs. Up to 33% of the time, lift 35 lb. chain hoist, 35 lb. eight-foot ladder, chemicals/salt bags and other equipment up to 50 lbs. from 2 to 30 feet. Up to 33% of time, lift pipes, machine units, motors, valves, tank that weight up to 80 lbs. No more than 80 lbs. lifted by one person; if more than 80 lbs, use human or mechanical assistance. Up to 33% of time, push light objects with 15 lbs. of force. Up to 33% of time, push objects such as storage scaffold, sand bags, hose reels, valves, canister of refrigerant with up to 70 lbs. of force. Up to 33% of time, push objects such as cart on wheels of pipes onto elevator requiring 23 lbs. of force. Up to 33% of time, push objects such as chain hoist up or down inclines or ramps requiring 54 lbs. of force or high-rise lift with 65 lbs. of force. Always use two people to push cougar lift. Up to 33% of the time, use foot to operate the sheet metal bender. Up to 33% of time, pull light objects with 16 lbs. of force. Up to 33% of time, pull objects such as storage scaffold, sandbags, hose reels, valves, canister of refrigerant with up to 52 lbs. of force. Up to 33% of time, push objects such as cart on wheels of pipes onto elevator requiring 34 lbs. of force. Up to 33% of time, push objects such as chain hoist up or down inclines or ramps requiring 110 lbs. of force, or high-rise lift with 110 lbs. of force. Maximum carry is 50 lbs less than 10 feet on smooth (hallways) and rough terrain (roof). Recommend carts to carry salt bags. Typical work environment has minimal to moderate noise levels, however, infrequently exposed to very loud noise high velocity air (CFMs). Candidates must successfully complete and pass any required testing. Compensation Range: Pay Range - Start: $29.53 Pay Range - End: $44.29 Geographic Specific Pay Structure: Structure 110: Structure 115: We believe in fairness and transparency. It's why we share the salary range for most of our roles. However, final salaries are based on a number of factors, including the skills and experience of the candidate; the current market; location of the candidate; and other factors uncovered in the hiring process. The standard pay structure is listed but if you're living in California, New York City or other eligible location, geographic specific pay structures, compensation and benefits could be applicable, click here to learn more. Grow your career with a best-in-class company that puts our clients' interests at the center of all we do. Get started now! Northwestern Mutual is an equal opportunity employer who welcomes and encourages diversity in the workforce. We are committed to creating and maintaining an environment in which each employee can contribute creative ideas, seek challenges, assume leadership and continue to focus on meeting and exceeding business and personal objectives. . click apply for full job details
At Osprey Village, we are proud to be recognized as a Great Place to Work , and we believe that our success begins with one simple principle: People First. We are a luxury senior living company that is driven by compassion, respect, and the dedication to making every interaction meaningful. If you are passionate about providing exceptional care in an environment where you're valued and supported, we invite you to be part of a company that truly puts people at the heart of everything we do. Come join us and be a part of something extraordinary! Now accepting applications for FT Maintenance Tech I. Sign-On Bonus: $1000 paid out over 180 days Call 904- - Interviews offered daily. POSITION SUMMARY: Maintenance Tech I assists all maintenance personnel in the short term, preventative and emergency maintenance programs for the buildings, grounds and equipment at the campus. Responsibilities will include the completion of all assigned work orders and maintenance projects under the supervision of the Director of Facility Services. ESSENTIAL FUNCTIONS: Represents the campus in a positive manner while creating an environment that fosters respect and courtesy for residents and employees alike. Works within the campus programs to encourage and promote safety and the well-being of all residents and employees. Upholds the Company's Mission Statement. Maintains HIPAA standards and regards all medical or healthcare information pertaining to residents and employees as confidential. Restores vacant units to "like new" condition (including but not limited to the stripping of walls and flooring, repainting surfaces, removing carpet, replacing glass and windows, patching sheetrock, cutting and replacing interior and exterior trim, hanging doors, and replacing fixtures. Performs maintenance repairs on the equipment, buildings and grounds, as needed. This will include but is not limited to installation, modification, cleaning, and repairs of wood, metal and stone structures, appliances, utility supply lines, irrigation systems, plumbing lines and fixtures, security systems, HVAC equipment, electrical components, switches, light fixtures, safety equipment, elevators, etc. Assists in the success of the preventative maintenance programs (hereafter known as PM) set up by the campus which will include but is not limited to PM on elevators, fire extinguishers, HVAC units, appliances, emergency generators (if applicable), and water temperatures. Logs all information in specified books, software or charts. Assists in the installation, repair, cleaning, or modification of therapy pools, swimming pools, therapeutic baths, or any corresponding equipment. 8. Removes all trash located in the collection areas of the campus. 9. Checks shipments and deliveries from vendors. Contacts and corresponds with vendors, contractors, associates, and corporate office team as needed. OTHER DUTIES AND RESPONSIBILITIES: Travels occasionally for training sessions, continuing education opportunities, emergency situations, and other company functions. Responsible for knowledge of fire and safety procedures including those involving blood-borne pathogens. Remains in proper uniform at all times and maintains a high standard of appearance. Completes all work orders in a timely manner. Maintains excellent resident and employee relations. Handles complaints and recommendations constructively. Attends employee in-services as required. Interacts well with marketing tours and prospective residents. Is available for on-call situations on a regular rotating and emergency basis. Accepts other duties as required by the Director of Facility Services. Occasionally, you will be required to operate a vehicle of either your own or company-owned for designated company purposes or facilitate resident/member needs and/or requests. REQUIREMENTS: A. Education - High school graduation or GED required. - Technical training in mechanics, electrical, plumbing, landscaping, or HVAC desired. B. Direct Previous Experience - Mechanical or maintenance experience required. - Two years experience in painting and housing / commercial refurbishment desired. - Two years experience in a similar maintenance position desired. C. Skills: - Ability to work with minimal supervision. - Must conduct all business with a professional manner and with a high level of confidentiality. - Ability to use hand tools, automatic / electrical machinery, carts, and dollies. - Thorough knowledge of MSDS (Material Safety Data Sheets) and OSHA compliance. - Ability to exhibit efficient computer skills. - Basic knowledge of swimming pools and swimming pool maintenance. - Must have a valid driver's license and satisfactory driving record as specified by the Company and by the Company's automobile insurance carrier. D. Abilities: - Work outdoors and indoors during the work day (fluorescent lights, HVAC system, carpeted flooring, normal office noise levels). - Climb up to two flights of stairs. - Ability to climb extension ladder up to and above roof height. - Lift objects of 25 pounds or less over the head. - Move objects of 100 pounds or more. - Ability to swim at least 25 yards. - Ability to work under time-sensitive or stressful situations. - Respond to medical emergencies on a rare occasion. - Assist with resident evacuations, if ever required
12/13/2025
Full time
At Osprey Village, we are proud to be recognized as a Great Place to Work , and we believe that our success begins with one simple principle: People First. We are a luxury senior living company that is driven by compassion, respect, and the dedication to making every interaction meaningful. If you are passionate about providing exceptional care in an environment where you're valued and supported, we invite you to be part of a company that truly puts people at the heart of everything we do. Come join us and be a part of something extraordinary! Now accepting applications for FT Maintenance Tech I. Sign-On Bonus: $1000 paid out over 180 days Call 904- - Interviews offered daily. POSITION SUMMARY: Maintenance Tech I assists all maintenance personnel in the short term, preventative and emergency maintenance programs for the buildings, grounds and equipment at the campus. Responsibilities will include the completion of all assigned work orders and maintenance projects under the supervision of the Director of Facility Services. ESSENTIAL FUNCTIONS: Represents the campus in a positive manner while creating an environment that fosters respect and courtesy for residents and employees alike. Works within the campus programs to encourage and promote safety and the well-being of all residents and employees. Upholds the Company's Mission Statement. Maintains HIPAA standards and regards all medical or healthcare information pertaining to residents and employees as confidential. Restores vacant units to "like new" condition (including but not limited to the stripping of walls and flooring, repainting surfaces, removing carpet, replacing glass and windows, patching sheetrock, cutting and replacing interior and exterior trim, hanging doors, and replacing fixtures. Performs maintenance repairs on the equipment, buildings and grounds, as needed. This will include but is not limited to installation, modification, cleaning, and repairs of wood, metal and stone structures, appliances, utility supply lines, irrigation systems, plumbing lines and fixtures, security systems, HVAC equipment, electrical components, switches, light fixtures, safety equipment, elevators, etc. Assists in the success of the preventative maintenance programs (hereafter known as PM) set up by the campus which will include but is not limited to PM on elevators, fire extinguishers, HVAC units, appliances, emergency generators (if applicable), and water temperatures. Logs all information in specified books, software or charts. Assists in the installation, repair, cleaning, or modification of therapy pools, swimming pools, therapeutic baths, or any corresponding equipment. 8. Removes all trash located in the collection areas of the campus. 9. Checks shipments and deliveries from vendors. Contacts and corresponds with vendors, contractors, associates, and corporate office team as needed. OTHER DUTIES AND RESPONSIBILITIES: Travels occasionally for training sessions, continuing education opportunities, emergency situations, and other company functions. Responsible for knowledge of fire and safety procedures including those involving blood-borne pathogens. Remains in proper uniform at all times and maintains a high standard of appearance. Completes all work orders in a timely manner. Maintains excellent resident and employee relations. Handles complaints and recommendations constructively. Attends employee in-services as required. Interacts well with marketing tours and prospective residents. Is available for on-call situations on a regular rotating and emergency basis. Accepts other duties as required by the Director of Facility Services. Occasionally, you will be required to operate a vehicle of either your own or company-owned for designated company purposes or facilitate resident/member needs and/or requests. REQUIREMENTS: A. Education - High school graduation or GED required. - Technical training in mechanics, electrical, plumbing, landscaping, or HVAC desired. B. Direct Previous Experience - Mechanical or maintenance experience required. - Two years experience in painting and housing / commercial refurbishment desired. - Two years experience in a similar maintenance position desired. C. Skills: - Ability to work with minimal supervision. - Must conduct all business with a professional manner and with a high level of confidentiality. - Ability to use hand tools, automatic / electrical machinery, carts, and dollies. - Thorough knowledge of MSDS (Material Safety Data Sheets) and OSHA compliance. - Ability to exhibit efficient computer skills. - Basic knowledge of swimming pools and swimming pool maintenance. - Must have a valid driver's license and satisfactory driving record as specified by the Company and by the Company's automobile insurance carrier. D. Abilities: - Work outdoors and indoors during the work day (fluorescent lights, HVAC system, carpeted flooring, normal office noise levels). - Climb up to two flights of stairs. - Ability to climb extension ladder up to and above roof height. - Lift objects of 25 pounds or less over the head. - Move objects of 100 pounds or more. - Ability to swim at least 25 yards. - Ability to work under time-sensitive or stressful situations. - Respond to medical emergencies on a rare occasion. - Assist with resident evacuations, if ever required
PAPE' KENWORTH - REDMOND, OR JOURNEYMAN TRUCK TECHNICIAN / MECHANIC - MONDAY - FRIDAY SWING SHIFT: Do you love working on equipment and turning wrenches? Are you looking to grow your skills as a mechanic? Are you looking for not just another job, but a career? Pape' Kenworth, a premier medium and heavy-duty truck and equipment dealer in the West, is seeking a Journeyman Truck Technician / Mechanic to join our team! At Pape', we invest in your growth. From robust training programs to continuous support, we equip our team members with the tools to succeed. In return for your hard work, we offer competitive compensation, exceptional benefits, and a strong work-life balance designed to support you and your family. Make a difference. Grow your career. Join the Pape' Team! WHAT YOU'LL DO: As our Journeyman Truck Technician / Mechanic, you will work on medium and heavy-duty class 7 & 8 trucks in the shop ensuring repairs are done accurately and timely. All your hard work is geared toward supporting our customers and maximizing their uptime. When a truck is sidelined, you will be a member trusted to get it back in service quickly and correctly the first time, while also serving as a leader others can look to for guidance and expertise. This role demands both technical expertise and the ability to think critically under pressure. You will be responsible for analyzing and diagnosing complex truck malfunctions or system failures, then determining the best course of action to return the truck to peak performance. That may mean repairing or rebuilding cabs, steering systems, engines, transmissions, axles, differentials, brakes, clutches, electrical systems, or air systems. Beyond repair work, you will also be expected to maintain and service trucks to ensure reliability, minimize downtime, and extend the life of each vehicle. The role requires not just hands-on mechanical ability but also sound judgment, a strong attention to detail, and the ability to deliver work that meets the highest standards of safety and quality. Every day, picture your career flourishing as you work alongside other trained Technicians in a shop that has all the support and resources you need to perform top-notch work on heavy trucks. This position will work the swing shift Monday through Friday, 2:30pm-11:00pm. WHAT YOU NEED: 3 or more years of experience working on all makes and models of medium and heavy-duty class 7/8 trucks, including engine repair, electronic trouble-shooting, HVAC systems, and chassis repair. Kenworth Essentials certifications preferred. Basic computer knowledge. Cummins and MX software experience preferred. Self-motivation and assertiveness. Ability to work under little or no supervision. Excellent communication and customer relations skills. Must provide own tools. Compensation: $36.35-40.90/hr (Depending on Experience) Why work for Pape': Competitive pay based on your skills, training, and experience level. Outstanding benefits including - 401(k) & Roth 401(k) Retirement Plans with Company Match; Medical, Dental, Vision and Prescription Insurance; Flexible Spending Accounts (Flex Plans); Life Insurance; Short- and Long-Term Disability Insurance; Employee Assistance Program; Online and Instructor-Led Training; Tuition Reimbursement for Training Programs. Progressive Vacation Plans, Sick Leave & Paid Holidays - Members receive 80 hours of vacation (First year is prorated for new hires based on start date), 40 hours of Sick Leave, and 7 paid holidays each year. Pape' vacation plans also have tiers based on your seniority, so as your seniority grows, your vacation time off does as well. Advancement - Pape' is a dynamic, growth-oriented organization with a focus on promoting from within. Stability and reputation - Pape' is a family-owned, fourth-generation company with over 160 locations, over 4,000 members and 85 plus years of experience. Pape' is known for their stability, honesty and integrity. Equipment - Pape' has the largest equipment inventory in the West and an unparalleled parts inventory! Employee impact - Enjoy an open-door policy where your voice will be heard and your opinions will matter. Training - You will be provided with training and mentoring to prepare you for your role and continued learning to grow your skills. The Pape' Group maintains a drug-free workplace and as such, requires candidates to successfully pass a pre-employment drug test. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
12/13/2025
Full time
PAPE' KENWORTH - REDMOND, OR JOURNEYMAN TRUCK TECHNICIAN / MECHANIC - MONDAY - FRIDAY SWING SHIFT: Do you love working on equipment and turning wrenches? Are you looking to grow your skills as a mechanic? Are you looking for not just another job, but a career? Pape' Kenworth, a premier medium and heavy-duty truck and equipment dealer in the West, is seeking a Journeyman Truck Technician / Mechanic to join our team! At Pape', we invest in your growth. From robust training programs to continuous support, we equip our team members with the tools to succeed. In return for your hard work, we offer competitive compensation, exceptional benefits, and a strong work-life balance designed to support you and your family. Make a difference. Grow your career. Join the Pape' Team! WHAT YOU'LL DO: As our Journeyman Truck Technician / Mechanic, you will work on medium and heavy-duty class 7 & 8 trucks in the shop ensuring repairs are done accurately and timely. All your hard work is geared toward supporting our customers and maximizing their uptime. When a truck is sidelined, you will be a member trusted to get it back in service quickly and correctly the first time, while also serving as a leader others can look to for guidance and expertise. This role demands both technical expertise and the ability to think critically under pressure. You will be responsible for analyzing and diagnosing complex truck malfunctions or system failures, then determining the best course of action to return the truck to peak performance. That may mean repairing or rebuilding cabs, steering systems, engines, transmissions, axles, differentials, brakes, clutches, electrical systems, or air systems. Beyond repair work, you will also be expected to maintain and service trucks to ensure reliability, minimize downtime, and extend the life of each vehicle. The role requires not just hands-on mechanical ability but also sound judgment, a strong attention to detail, and the ability to deliver work that meets the highest standards of safety and quality. Every day, picture your career flourishing as you work alongside other trained Technicians in a shop that has all the support and resources you need to perform top-notch work on heavy trucks. This position will work the swing shift Monday through Friday, 2:30pm-11:00pm. WHAT YOU NEED: 3 or more years of experience working on all makes and models of medium and heavy-duty class 7/8 trucks, including engine repair, electronic trouble-shooting, HVAC systems, and chassis repair. Kenworth Essentials certifications preferred. Basic computer knowledge. Cummins and MX software experience preferred. Self-motivation and assertiveness. Ability to work under little or no supervision. Excellent communication and customer relations skills. Must provide own tools. Compensation: $36.35-40.90/hr (Depending on Experience) Why work for Pape': Competitive pay based on your skills, training, and experience level. Outstanding benefits including - 401(k) & Roth 401(k) Retirement Plans with Company Match; Medical, Dental, Vision and Prescription Insurance; Flexible Spending Accounts (Flex Plans); Life Insurance; Short- and Long-Term Disability Insurance; Employee Assistance Program; Online and Instructor-Led Training; Tuition Reimbursement for Training Programs. Progressive Vacation Plans, Sick Leave & Paid Holidays - Members receive 80 hours of vacation (First year is prorated for new hires based on start date), 40 hours of Sick Leave, and 7 paid holidays each year. Pape' vacation plans also have tiers based on your seniority, so as your seniority grows, your vacation time off does as well. Advancement - Pape' is a dynamic, growth-oriented organization with a focus on promoting from within. Stability and reputation - Pape' is a family-owned, fourth-generation company with over 160 locations, over 4,000 members and 85 plus years of experience. Pape' is known for their stability, honesty and integrity. Equipment - Pape' has the largest equipment inventory in the West and an unparalleled parts inventory! Employee impact - Enjoy an open-door policy where your voice will be heard and your opinions will matter. Training - You will be provided with training and mentoring to prepare you for your role and continued learning to grow your skills. The Pape' Group maintains a drug-free workplace and as such, requires candidates to successfully pass a pre-employment drug test. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
We are currently seeking a Maintenance Technician to join our team. The Maintenance Tech will assure responsive and efficient maintenance service for all LRC managed properties. As part of Lawson, recognized as a Best Places to Work in Multifamily award winner with more than fifty years of experience developing, building, and managing multifamily real estate in Virginia, you'll be valued in a supportive environment that appreciates your contributions. Lawson offers a collaborative workplace culture, competitive benefits, and ample opportunities for professional growth. Contribute to a team dedicated to providing exceptional living experiences for our residents while advancing your career! Duties/Responsibilities: Service Request Perform, with good workmanship, all assigned projects in a timely manner Perform as on-call emergency service technician as directed Repair/replace HVAC systems and components, gas and electric appliances, glass, wall tile, floor coverings, sub floors, fixtures, blinds, exterior building coverings, playgrounds, mailbox clusters, sidewalks, asphalt and locks etc. Perform plumbing, electrical, painting, concrete, masonry, minor extermination and carpentry work etc. Preventative maintenance follow preventive maintenance procedures Customer satisfaction Ensure the completion of work requests within twenty-four (24) hours Report all resident complaints and/or resident work requests to Supervisor Other duties as assigned Required Skills/Abilities: Mechanical aptitude Formal training in one or more of the following trades: carpentry, plumbing, electrical, painting, drywall installation or air conditioning All applicable certifications must be obtained within the first year of employment. Good human relation skills to deal with tenants, peers, and supervisors. Licensed driver with good driving record, preferred Ability to drive a golf cart. Be available to report to work during any inclement weather event for property clean up and emergencies. Enthusiasm, good attitude, trustworthiness, personal integrity, and honesty Education and Experience: High School diploma or equivalent minimum of one (1) year maintenance trade experience Possess minimum Type I & II CFC Refrigerant Certification in accordance with 40CFR Part 82, Subpart F or possess the ability to obtain the designation within one (1) years' time Physical Functions Bending, kneeling, stretching, climbing stairs and ladders, squatting, lifting up to sixty (60) pounds, running and lifting over sixty (60) pounds occasionally. The Lawson Companies is an equal opportunity employer that offers full-time employees a competitive package that includes, but is not limited to, medical, dental, vision, life insurance, 401K options, PTO, a competitive salary, and a project bonus structure. PIcd090e6a37f9-3121
12/12/2025
Full time
We are currently seeking a Maintenance Technician to join our team. The Maintenance Tech will assure responsive and efficient maintenance service for all LRC managed properties. As part of Lawson, recognized as a Best Places to Work in Multifamily award winner with more than fifty years of experience developing, building, and managing multifamily real estate in Virginia, you'll be valued in a supportive environment that appreciates your contributions. Lawson offers a collaborative workplace culture, competitive benefits, and ample opportunities for professional growth. Contribute to a team dedicated to providing exceptional living experiences for our residents while advancing your career! Duties/Responsibilities: Service Request Perform, with good workmanship, all assigned projects in a timely manner Perform as on-call emergency service technician as directed Repair/replace HVAC systems and components, gas and electric appliances, glass, wall tile, floor coverings, sub floors, fixtures, blinds, exterior building coverings, playgrounds, mailbox clusters, sidewalks, asphalt and locks etc. Perform plumbing, electrical, painting, concrete, masonry, minor extermination and carpentry work etc. Preventative maintenance follow preventive maintenance procedures Customer satisfaction Ensure the completion of work requests within twenty-four (24) hours Report all resident complaints and/or resident work requests to Supervisor Other duties as assigned Required Skills/Abilities: Mechanical aptitude Formal training in one or more of the following trades: carpentry, plumbing, electrical, painting, drywall installation or air conditioning All applicable certifications must be obtained within the first year of employment. Good human relation skills to deal with tenants, peers, and supervisors. Licensed driver with good driving record, preferred Ability to drive a golf cart. Be available to report to work during any inclement weather event for property clean up and emergencies. Enthusiasm, good attitude, trustworthiness, personal integrity, and honesty Education and Experience: High School diploma or equivalent minimum of one (1) year maintenance trade experience Possess minimum Type I & II CFC Refrigerant Certification in accordance with 40CFR Part 82, Subpart F or possess the ability to obtain the designation within one (1) years' time Physical Functions Bending, kneeling, stretching, climbing stairs and ladders, squatting, lifting up to sixty (60) pounds, running and lifting over sixty (60) pounds occasionally. The Lawson Companies is an equal opportunity employer that offers full-time employees a competitive package that includes, but is not limited to, medical, dental, vision, life insurance, 401K options, PTO, a competitive salary, and a project bonus structure. PIcd090e6a37f9-3121
Global Finishing Solutions, LLC.
Salt Lake City, Utah
Every Fix Makes a Difference Are you a hands-on problem solver with a knack for both mechanical and electrical systems? Do you enjoy traveling, working directly with customers, and making things work better? As a Field Service Technician II at Global Finishing Solutions (GFS) , you'll be the face of a premium brand trusted across the auto-refinishing industry. You won't just fix equipment-you'll help people succeed in their business every day. You'll install, troubleshoot, and maintain our industry-leading paint booths and finishing systems, while training customers and ensuring they get the most out of their investment. Every day is different, every challenge is unique, and your work truly matters. What Success looks Like Install, start up, & maintain high-performance paint booths and equipment for auto body shops and industrial customers. Troubleshoot and repair systems-from motors and fans to VFDs and process controllers. Use your technical know-how to read schematics, diagnose electrical/mechanical issues, and solve problems in the field. Deliver exceptional customer training-both hands-on and classroom-style. Share feedback with engineering and design teams to make our products even better Travel regionally (some overnights) to support our customers and partners Qualifications That Shine 4+ years of experience in a technical role (HVAC, industrial equipment, controls, or related) Strong understanding of mechanical systems, wiring, controls, and airflow Ability to read and revise blueprints, electrical diagrams, and schematics Self-starter mindset with strong problem-solving and customer service skills Valid driver's license and willingness to travel throughout the region Associate degree preferred-but equivalent hands-on experience is highly valued Why You'll Love Working Here You'll Be Empowered - You'll have autonomy in your role, supported by a team that trusts your judgment You'll Grow With Us - We invest in your training, development, and long-term career path You'll Be Rewarded - Competitive pay, performance incentives, 401(k) with profit sharing, and great benefits You'll Make a Real Impact - Your work supports businesses across North America and shapes the future of finishing technology You'll Join a Great Team - We're growing fast, we value collaboration, and are committed to your success About GFS Global Finishing Solutions is the leading manufacturer of paint booths and finishing systems serving automotive, aerospace, industrial manufacturing, marine, military, rail, trucking, and wood finishing markets. We specialize in building custom solutions that meet each customer's unique needs-and we do it with a team that thrives on collaboration and innovation because we're different. What makes us different is our unwavering commitment to our core values of family, respect, partnership, improvement, and integrity. We are a family-oriented organization that still values the little things, creating a workplace where you can thrive, fairness guides every decision, and collaboration drives shared success. Small town in spirit but big-hearted in impact, here you're not just joining a company-you're joining a team that grows together, celebrates together, and builds lasting value together. That's the difference. Join us. Apply now at About GFS Watch Us in Action Connect on LinkedIn GFS is proud to be an Equal Opportunity Employer. We value diversity and welcome applications from all backgrounds. Veterans, women, and minorities are especially encouraged to apply. PI022fe4106dc8-2744
12/12/2025
Full time
Every Fix Makes a Difference Are you a hands-on problem solver with a knack for both mechanical and electrical systems? Do you enjoy traveling, working directly with customers, and making things work better? As a Field Service Technician II at Global Finishing Solutions (GFS) , you'll be the face of a premium brand trusted across the auto-refinishing industry. You won't just fix equipment-you'll help people succeed in their business every day. You'll install, troubleshoot, and maintain our industry-leading paint booths and finishing systems, while training customers and ensuring they get the most out of their investment. Every day is different, every challenge is unique, and your work truly matters. What Success looks Like Install, start up, & maintain high-performance paint booths and equipment for auto body shops and industrial customers. Troubleshoot and repair systems-from motors and fans to VFDs and process controllers. Use your technical know-how to read schematics, diagnose electrical/mechanical issues, and solve problems in the field. Deliver exceptional customer training-both hands-on and classroom-style. Share feedback with engineering and design teams to make our products even better Travel regionally (some overnights) to support our customers and partners Qualifications That Shine 4+ years of experience in a technical role (HVAC, industrial equipment, controls, or related) Strong understanding of mechanical systems, wiring, controls, and airflow Ability to read and revise blueprints, electrical diagrams, and schematics Self-starter mindset with strong problem-solving and customer service skills Valid driver's license and willingness to travel throughout the region Associate degree preferred-but equivalent hands-on experience is highly valued Why You'll Love Working Here You'll Be Empowered - You'll have autonomy in your role, supported by a team that trusts your judgment You'll Grow With Us - We invest in your training, development, and long-term career path You'll Be Rewarded - Competitive pay, performance incentives, 401(k) with profit sharing, and great benefits You'll Make a Real Impact - Your work supports businesses across North America and shapes the future of finishing technology You'll Join a Great Team - We're growing fast, we value collaboration, and are committed to your success About GFS Global Finishing Solutions is the leading manufacturer of paint booths and finishing systems serving automotive, aerospace, industrial manufacturing, marine, military, rail, trucking, and wood finishing markets. We specialize in building custom solutions that meet each customer's unique needs-and we do it with a team that thrives on collaboration and innovation because we're different. What makes us different is our unwavering commitment to our core values of family, respect, partnership, improvement, and integrity. We are a family-oriented organization that still values the little things, creating a workplace where you can thrive, fairness guides every decision, and collaboration drives shared success. Small town in spirit but big-hearted in impact, here you're not just joining a company-you're joining a team that grows together, celebrates together, and builds lasting value together. That's the difference. Join us. Apply now at About GFS Watch Us in Action Connect on LinkedIn GFS is proud to be an Equal Opportunity Employer. We value diversity and welcome applications from all backgrounds. Veterans, women, and minorities are especially encouraged to apply. PI022fe4106dc8-2744
Description: We are seeking a driven and knowledgeable HVAC Sales & Estimating professional to support our commercial and industrial clients. This role is responsible for creating accurate estimates, generating new business, nurturing long-term client relationships, and representing our company with professionalism and technical expertise. Key Responsibilities: Sales & Business Development Identify and pursue new commercial and industrial HVAC sales opportunities. Conduct site visits, evaluate customer needs, and propose customized solutions. Prepare and deliver professional sales presentations and proposals. Maintain a strong pipeline of prospects and follow through to closing. Collaborate with internal teams to ensure seamless handoff from sale to project execution. Estimating Review blueprints, specifications, and project documents to prepare accurate HVAC estimates. Calculate labor, materials, equipment, subcontractor costs, and project timelines. Prepare competitive bids for both plan-and-spec and design-build projects. Analyze bid results and adjust estimating strategies as needed. Work closely with project managers to ensure estimates align with actual field conditions. Client Relationship Management Serve as the primary point of contact for new and existing clients. Build long-term relationships based on trust, technical expertise, and reliability. Respond promptly to customer inquiries and provide ongoing support. Conduct regular follow-ups to ensure customer satisfaction and drive repeat business. Represent the company at industry events, networking opportunities, and trade shows. Technical Expertise Maintain up-to-date knowledge of commercial and industrial HVAC systems, equipment, codes, and industry best practices. Work with engineering teams to validate system designs and recommendations. Provide customers with clear explanations of system operations, options, and benefits. Qualifications 3-5+ years of experience in HVAC sales, estimating, or related field (commercial/industrial strongly preferred). Strong understanding of HVAC mechanical systems, construction processes, and project documentation. Ability to read and interpret blueprints, specifications, and technical drawings. Excellent communication, negotiation, and customer service skills. Proficiency in estimating software, CRM systems, and Microsoft Office Suite. Results-oriented, self-motivated, and able to manage multiple projects simultaneously. Preferred Attributes Experience with design-build estimating. Strong network within commercial and industrial markets. Ability to work independently while collaborating across departments. Professional, polished, and solutions-oriented approach. Requirements: Eligibility Requirements This position requires a valid driver's license and reliable transportation. Employment/education will be verified. Applicants must be currently authorized to work in the United States on a full-time basis. Breen is a drug free workplace and requires post-offer pre-employment drug testing. Why You'll Love Working Here: Competitive base salary + commission structure. Health, dental, and vision insurance. Retirement plan. Paid time off and holidays. Vehicle stipend. Professional development and growth opportunities in a supportive, team-driven culture. Great supportive team. Breen and Sullivan complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Breen and Sullivan does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. Refrigeration: RC148185 3 Plumbing: 3378 AA/EOE PI88f102dc5-
12/12/2025
Full time
Description: We are seeking a driven and knowledgeable HVAC Sales & Estimating professional to support our commercial and industrial clients. This role is responsible for creating accurate estimates, generating new business, nurturing long-term client relationships, and representing our company with professionalism and technical expertise. Key Responsibilities: Sales & Business Development Identify and pursue new commercial and industrial HVAC sales opportunities. Conduct site visits, evaluate customer needs, and propose customized solutions. Prepare and deliver professional sales presentations and proposals. Maintain a strong pipeline of prospects and follow through to closing. Collaborate with internal teams to ensure seamless handoff from sale to project execution. Estimating Review blueprints, specifications, and project documents to prepare accurate HVAC estimates. Calculate labor, materials, equipment, subcontractor costs, and project timelines. Prepare competitive bids for both plan-and-spec and design-build projects. Analyze bid results and adjust estimating strategies as needed. Work closely with project managers to ensure estimates align with actual field conditions. Client Relationship Management Serve as the primary point of contact for new and existing clients. Build long-term relationships based on trust, technical expertise, and reliability. Respond promptly to customer inquiries and provide ongoing support. Conduct regular follow-ups to ensure customer satisfaction and drive repeat business. Represent the company at industry events, networking opportunities, and trade shows. Technical Expertise Maintain up-to-date knowledge of commercial and industrial HVAC systems, equipment, codes, and industry best practices. Work with engineering teams to validate system designs and recommendations. Provide customers with clear explanations of system operations, options, and benefits. Qualifications 3-5+ years of experience in HVAC sales, estimating, or related field (commercial/industrial strongly preferred). Strong understanding of HVAC mechanical systems, construction processes, and project documentation. Ability to read and interpret blueprints, specifications, and technical drawings. Excellent communication, negotiation, and customer service skills. Proficiency in estimating software, CRM systems, and Microsoft Office Suite. Results-oriented, self-motivated, and able to manage multiple projects simultaneously. Preferred Attributes Experience with design-build estimating. Strong network within commercial and industrial markets. Ability to work independently while collaborating across departments. Professional, polished, and solutions-oriented approach. Requirements: Eligibility Requirements This position requires a valid driver's license and reliable transportation. Employment/education will be verified. Applicants must be currently authorized to work in the United States on a full-time basis. Breen is a drug free workplace and requires post-offer pre-employment drug testing. Why You'll Love Working Here: Competitive base salary + commission structure. Health, dental, and vision insurance. Retirement plan. Paid time off and holidays. Vehicle stipend. Professional development and growth opportunities in a supportive, team-driven culture. Great supportive team. Breen and Sullivan complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Breen and Sullivan does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. Refrigeration: RC148185 3 Plumbing: 3378 AA/EOE PI88f102dc5-
We are currently seeking a Maintenance Technician to join our team. The Maintenance Tech will assure responsive and efficient maintenance service for all LRC managed properties. As part of Lawson, recognized as a Best Places to Work in Multifamily award winner with more than fifty years of experience developing, building, and managing multifamily real estate in Virginia, you'll be valued in a supportive environment that appreciates your contributions. Lawson offers a collaborative workplace culture, competitive benefits, and ample opportunities for professional growth. Contribute to a team dedicated to providing exceptional living experiences for our residents while advancing your career! Duties/Responsibilities: Service Request Perform, with good workmanship, all assigned projects in a timely manner Perform as on-call emergency service technician as directed Repair/replace HVAC systems and components, gas and electric appliances, glass, wall tile, floor coverings, sub floors, fixtures, blinds, exterior building coverings, playgrounds, mailbox clusters, sidewalks, asphalt and locks etc. Perform plumbing, electrical, painting, concrete, masonry, minor extermination and carpentry work etc. Preventative maintenance follow preventive maintenance procedures Customer satisfaction Ensure the completion of work requests within twenty-four (24) hours Report all resident complaints and/or resident work requests to Supervisor Other duties as assigned Required Skills/Abilities: Mechanical aptitude Formal training in one or more of the following trades: carpentry, plumbing, electrical, painting, drywall installation or air conditioning All applicable certifications must be obtained within the first year of employment. Good human relation skills to deal with tenants, peers, and supervisors. Licensed driver with good driving record, preferred Ability to drive a golf cart. Be available to report to work during any inclement weather event for property clean up and emergencies. Enthusiasm, good attitude, trustworthiness, personal integrity, and honesty Education and Experience: High School diploma or equivalent minimum of one (1) year maintenance trade experience Possess minimum Type I & II CFC Refrigerant Certification in accordance with 40CFR Part 82, Subpart F or possess the ability to obtain the designation within one (1) years' time Physical Functions Bending, kneeling, stretching, climbing stairs and ladders, squatting, lifting up to sixty (60) pounds, running and lifting over sixty (60) pounds occasionally. The Lawson Companies is an equal opportunity employer that offers full-time employees a competitive package that includes, but is not limited to, medical, dental, vision, life insurance, 401K options, PTO, a competitive salary, and a project bonus structure. PIa28af5-
12/12/2025
Full time
We are currently seeking a Maintenance Technician to join our team. The Maintenance Tech will assure responsive and efficient maintenance service for all LRC managed properties. As part of Lawson, recognized as a Best Places to Work in Multifamily award winner with more than fifty years of experience developing, building, and managing multifamily real estate in Virginia, you'll be valued in a supportive environment that appreciates your contributions. Lawson offers a collaborative workplace culture, competitive benefits, and ample opportunities for professional growth. Contribute to a team dedicated to providing exceptional living experiences for our residents while advancing your career! Duties/Responsibilities: Service Request Perform, with good workmanship, all assigned projects in a timely manner Perform as on-call emergency service technician as directed Repair/replace HVAC systems and components, gas and electric appliances, glass, wall tile, floor coverings, sub floors, fixtures, blinds, exterior building coverings, playgrounds, mailbox clusters, sidewalks, asphalt and locks etc. Perform plumbing, electrical, painting, concrete, masonry, minor extermination and carpentry work etc. Preventative maintenance follow preventive maintenance procedures Customer satisfaction Ensure the completion of work requests within twenty-four (24) hours Report all resident complaints and/or resident work requests to Supervisor Other duties as assigned Required Skills/Abilities: Mechanical aptitude Formal training in one or more of the following trades: carpentry, plumbing, electrical, painting, drywall installation or air conditioning All applicable certifications must be obtained within the first year of employment. Good human relation skills to deal with tenants, peers, and supervisors. Licensed driver with good driving record, preferred Ability to drive a golf cart. Be available to report to work during any inclement weather event for property clean up and emergencies. Enthusiasm, good attitude, trustworthiness, personal integrity, and honesty Education and Experience: High School diploma or equivalent minimum of one (1) year maintenance trade experience Possess minimum Type I & II CFC Refrigerant Certification in accordance with 40CFR Part 82, Subpart F or possess the ability to obtain the designation within one (1) years' time Physical Functions Bending, kneeling, stretching, climbing stairs and ladders, squatting, lifting up to sixty (60) pounds, running and lifting over sixty (60) pounds occasionally. The Lawson Companies is an equal opportunity employer that offers full-time employees a competitive package that includes, but is not limited to, medical, dental, vision, life insurance, 401K options, PTO, a competitive salary, and a project bonus structure. PIa28af5-
At Summit Hills, we are proud to be recognized as a Great Place to Work , and we believe that our success begins with one simple principle: People First. We are a luxury senior living company that is driven by compassion, respect, and the dedication to making every interaction meaningful. Our culture fosters growth, teamwork, and a genuine commitment to enriching the lives of our residents and our team members. If you're passionate about providing exceptional care in an environment where you're valued and supported, we invite you to be part of a company that truly puts people at the heart of everything we do. Come join us and be a part of something extraordinary! Now accepting applications for a HVAC/Maintenance Tech ll. Work schedule: M-F 7am-3:30pm. Must have HVAC and EPA certifications. Contact the HR Director at 864. . for more info. POSITION SUMMARY: Maintenance Tech II assists all maintenance personnel in the short term, preventative and emergency maintenance programs for the buildings, grounds and equipment at the campus. This position supervises special projects, handles compliance issues when needed and performs independent tasks. Responsibilities will include the completion of all assigned work orders, maintenance projects and preventive maintenance measures under the supervision of the Director of Facility Services. PRINCIPAL DUTIES AND RESPONSIBILITIES: 1. Represents the campus in a positive manner while creating an environment that fosters respect and courtesy for residents and employees alike. Works within the campus programs to encourage and promote safety and the well-being of all residents and employees. 2. Upholds the Company's Mission Statement. 3. Maintains HIPAA standards and regards all medical or healthcare information pertaining to residents and employees as confidential. 4. Uses skilled techniques in the performance of maintenance repairs on the equipment, buildings and grounds, as needed. Examples follow. a: This includes but is not limited to installation, repair and modification of wood, metal, stone, or other such structures. b: Includes but is not limited to installation, repair or modification of utility supply lines and equipment such as disposal systems, sewer lines, water distribution systems, irrigation systems, sinks, valves, traps, fixtures, fittings, faucets, coils, tubs, showers, lavatories, therapeutic baths, pumps, meters, etc. c: Includes but is not limited to installation, repair or modification of HVAC units and their components plus the diagnosing of major repairs and placing orders for those repairs. d: Includes but is not limited to installation, repair or modification of electrical components, such as wiring, controls, switches and relays, connections and fittings, light fixtures, thermostats, equipment, etc. within the grounds and buildings of the campus. e: Includes but is not limited to installation, repair, cleaning, or modification of therapy pools, swimming pools, therapeutic baths, or any corresponding equipment. 5. Assists in the success of the preventative maintenance programs (hereafter known as PM) set up by the campus which will include but is not limited to PM on elevators, fire extinguishers, HVAC units, appliances, emergency generators (if applicable), and water temperatures. Logs all information in specified books or charts. OTHER DUTIES AND RESPONSIBILITIES: 1. Travels occasionally for training sessions, continuing education opportunities, emergency situations, and other company functions. 2. Responsible for knowledge of fire and safety procedures including those involving blood-borne pathogens. 3. Remains in proper uniform at all times and maintains a high standard of appearance. 4. Completes all work orders in a timely manner. 5. Restores vacant units to "like new" condition (including but not limited to the stripping of walls and flooring, repainting surfaces, removing carpet, replacing glass and windows, patching sheetrock, cutting and replacing interior and exterior trim, hanging doors, and replacing fixtures). 6. Comprehends budget and exercises cost control. 7. Removes all trash located in the collection areas of the campus. 8. Interacts well with marketing tours and prospective residents. 9. Maintains excellent resident and employee relations. Handles complaints and recommendations constructively. 10. Attends employee in-services as required. 11. Is available for on-call situations on a regular rotating and emergency basis. 12. Accepts other duties as required by the Director of Facility Services. 13. Occasionally, you will be required to operate a vehicle of either your own or company-owned for designated company purposes or facilitate resident/member needs and/or requests. PREREQUISITES: A. Education: - Advanced technical training in at least four of the following areas: mechanics, electrical, plumbing, sprinkler systems, landscaping, or HVAC required. -HVAC and Universal EPA certifications are required. -CPO certification required. B. Direct Previous Experience: - Mechanical or maintenance experience required. - Two years' experience in a similar maintenance position desired. C. Skills: - Ability to work with minimal supervision. - Must conduct all business with a professional manner and with a high level of confidentiality. - Ability to use hand tools, automatic / electrical machinery, carts, and dollies. - Ability to exhibit efficient computer skills. - Thorough knowledge of MSDS (Material Safety Data Sheets) and OSHA compliance. - Ability to use blue prints, drawings, drafts, and schematics in trouble shooting electrical, HVAC, plumbing, structural, and equipment problems within the campus. - Basic knowledge of swimming pools and swimming pool maintenance. - Must have a valid driver's license and satisfactory driving record as specified by the Company and by the Company's automobile insurance carrier. D. Abilities: - Work outdoors and indoors during the work day (fluorescent lights, HVAC system, carpeted flooring, normal office noise levels). - Climb up to two flights of stairs. - Ability to climb extension ladder up to and above roof height. - Lift objects of 25 pounds or less over the head. - Move objects of 100 pounds or more. - Ability to swim at least 25 yards. - Ability to work under time-sensitive or stressful situations. - Respond to medical emergencies on a rare occasion. - Assist with resident evacuations, if ever required
12/12/2025
Full time
At Summit Hills, we are proud to be recognized as a Great Place to Work , and we believe that our success begins with one simple principle: People First. We are a luxury senior living company that is driven by compassion, respect, and the dedication to making every interaction meaningful. Our culture fosters growth, teamwork, and a genuine commitment to enriching the lives of our residents and our team members. If you're passionate about providing exceptional care in an environment where you're valued and supported, we invite you to be part of a company that truly puts people at the heart of everything we do. Come join us and be a part of something extraordinary! Now accepting applications for a HVAC/Maintenance Tech ll. Work schedule: M-F 7am-3:30pm. Must have HVAC and EPA certifications. Contact the HR Director at 864. . for more info. POSITION SUMMARY: Maintenance Tech II assists all maintenance personnel in the short term, preventative and emergency maintenance programs for the buildings, grounds and equipment at the campus. This position supervises special projects, handles compliance issues when needed and performs independent tasks. Responsibilities will include the completion of all assigned work orders, maintenance projects and preventive maintenance measures under the supervision of the Director of Facility Services. PRINCIPAL DUTIES AND RESPONSIBILITIES: 1. Represents the campus in a positive manner while creating an environment that fosters respect and courtesy for residents and employees alike. Works within the campus programs to encourage and promote safety and the well-being of all residents and employees. 2. Upholds the Company's Mission Statement. 3. Maintains HIPAA standards and regards all medical or healthcare information pertaining to residents and employees as confidential. 4. Uses skilled techniques in the performance of maintenance repairs on the equipment, buildings and grounds, as needed. Examples follow. a: This includes but is not limited to installation, repair and modification of wood, metal, stone, or other such structures. b: Includes but is not limited to installation, repair or modification of utility supply lines and equipment such as disposal systems, sewer lines, water distribution systems, irrigation systems, sinks, valves, traps, fixtures, fittings, faucets, coils, tubs, showers, lavatories, therapeutic baths, pumps, meters, etc. c: Includes but is not limited to installation, repair or modification of HVAC units and their components plus the diagnosing of major repairs and placing orders for those repairs. d: Includes but is not limited to installation, repair or modification of electrical components, such as wiring, controls, switches and relays, connections and fittings, light fixtures, thermostats, equipment, etc. within the grounds and buildings of the campus. e: Includes but is not limited to installation, repair, cleaning, or modification of therapy pools, swimming pools, therapeutic baths, or any corresponding equipment. 5. Assists in the success of the preventative maintenance programs (hereafter known as PM) set up by the campus which will include but is not limited to PM on elevators, fire extinguishers, HVAC units, appliances, emergency generators (if applicable), and water temperatures. Logs all information in specified books or charts. OTHER DUTIES AND RESPONSIBILITIES: 1. Travels occasionally for training sessions, continuing education opportunities, emergency situations, and other company functions. 2. Responsible for knowledge of fire and safety procedures including those involving blood-borne pathogens. 3. Remains in proper uniform at all times and maintains a high standard of appearance. 4. Completes all work orders in a timely manner. 5. Restores vacant units to "like new" condition (including but not limited to the stripping of walls and flooring, repainting surfaces, removing carpet, replacing glass and windows, patching sheetrock, cutting and replacing interior and exterior trim, hanging doors, and replacing fixtures). 6. Comprehends budget and exercises cost control. 7. Removes all trash located in the collection areas of the campus. 8. Interacts well with marketing tours and prospective residents. 9. Maintains excellent resident and employee relations. Handles complaints and recommendations constructively. 10. Attends employee in-services as required. 11. Is available for on-call situations on a regular rotating and emergency basis. 12. Accepts other duties as required by the Director of Facility Services. 13. Occasionally, you will be required to operate a vehicle of either your own or company-owned for designated company purposes or facilitate resident/member needs and/or requests. PREREQUISITES: A. Education: - Advanced technical training in at least four of the following areas: mechanics, electrical, plumbing, sprinkler systems, landscaping, or HVAC required. -HVAC and Universal EPA certifications are required. -CPO certification required. B. Direct Previous Experience: - Mechanical or maintenance experience required. - Two years' experience in a similar maintenance position desired. C. Skills: - Ability to work with minimal supervision. - Must conduct all business with a professional manner and with a high level of confidentiality. - Ability to use hand tools, automatic / electrical machinery, carts, and dollies. - Ability to exhibit efficient computer skills. - Thorough knowledge of MSDS (Material Safety Data Sheets) and OSHA compliance. - Ability to use blue prints, drawings, drafts, and schematics in trouble shooting electrical, HVAC, plumbing, structural, and equipment problems within the campus. - Basic knowledge of swimming pools and swimming pool maintenance. - Must have a valid driver's license and satisfactory driving record as specified by the Company and by the Company's automobile insurance carrier. D. Abilities: - Work outdoors and indoors during the work day (fluorescent lights, HVAC system, carpeted flooring, normal office noise levels). - Climb up to two flights of stairs. - Ability to climb extension ladder up to and above roof height. - Lift objects of 25 pounds or less over the head. - Move objects of 100 pounds or more. - Ability to swim at least 25 yards. - Ability to work under time-sensitive or stressful situations. - Respond to medical emergencies on a rare occasion. - Assist with resident evacuations, if ever required
Description: At Breen & Sullivan Mechanical Services , we design, build, and maintain the systems that keep buildings running - from HVAC to plumbing and electrical solutions. With decades of experience serving both residential and commercial clients, we're known for our craftsmanship, reliability, and commitment to excellence. Our culture is collaborative, growth-minded, and built around delivering top-quality results and exceptional customer experiences. Position Summary: We're looking for a Project Sales Engineer to help grow our installation division - specializing in either HVAC or Plumbing & Piping solutions. This is a client-facing role for a technically savvy and relationship-driven professional who thrives on turning opportunities into successful projects. If you're motivated by building strong partnerships, solving complex challenges, and seeing your work come to life in the field, this is the role for you. Key Responsibilities: Develop and maintain long-term relationships with residential and commercial clients. Conduct site visits to assess project needs and recommend the right system or solution. Prepare proposals, technical presentations, and accurate cost estimates. Collaborate with internal teams - engineering, project management, and service - to ensure smooth handoffs and outstanding project outcomes. Meet or exceed sales targets while contributing to company growth. Stay ahead of industry trends, energy-efficient technologies, and new product innovations. Participate in kickoff meetings and planning sessions for key projects. Focus Areas: HVAC Sales: Promote solutions involving chillers, VRF, RTUs, air handlers, and controls. Provide technical insight for energy-efficient retrofits and replacements. Interpret drawings and specifications to prepare accurate proposals. Plumbing & Piping Sales: Develop system solutions for domestic water, boilers, sanitary, storm, process, and gas piping. Support both new construction and retrofit projects with technical expertise. Translate plans and specs into accurate scopes of work and estimates. Requirements: Requirements: Proven experience in mechanical, HVAC, or plumbing/piping sales. Strong technical understanding and confidence in customer-facing discussions. Excellent communication, negotiation, and relationship-building skills. Self-motivated, organized, and results-driven. Valid driver's license with regular job site travel. Experience with CRM/ERP systems and Microsoft Office preferred. Eligibility Requirements This position requires a valid driver's license and reliable transportation. Employment/education will be verified. Applicants must be currently authorized to work in the United States on a full-time basis. Breen is a drug free workplace and requires post-offer pre-employment drug testing. Why You'll Love Working Here: Competitive base salary + commission structure. Health, dental, and vision insurance. Retirement plan. Paid time off and holidays. Vehicle stipend. Professional development and growth opportunities in a supportive, team-driven culture. Great supportive team. Breen and Sullivan complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Breen and Sullivan does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. Refrigeration: RC148185 3 Plumbing: 3378 AA/EOE PIeecd-1734
12/12/2025
Full time
Description: At Breen & Sullivan Mechanical Services , we design, build, and maintain the systems that keep buildings running - from HVAC to plumbing and electrical solutions. With decades of experience serving both residential and commercial clients, we're known for our craftsmanship, reliability, and commitment to excellence. Our culture is collaborative, growth-minded, and built around delivering top-quality results and exceptional customer experiences. Position Summary: We're looking for a Project Sales Engineer to help grow our installation division - specializing in either HVAC or Plumbing & Piping solutions. This is a client-facing role for a technically savvy and relationship-driven professional who thrives on turning opportunities into successful projects. If you're motivated by building strong partnerships, solving complex challenges, and seeing your work come to life in the field, this is the role for you. Key Responsibilities: Develop and maintain long-term relationships with residential and commercial clients. Conduct site visits to assess project needs and recommend the right system or solution. Prepare proposals, technical presentations, and accurate cost estimates. Collaborate with internal teams - engineering, project management, and service - to ensure smooth handoffs and outstanding project outcomes. Meet or exceed sales targets while contributing to company growth. Stay ahead of industry trends, energy-efficient technologies, and new product innovations. Participate in kickoff meetings and planning sessions for key projects. Focus Areas: HVAC Sales: Promote solutions involving chillers, VRF, RTUs, air handlers, and controls. Provide technical insight for energy-efficient retrofits and replacements. Interpret drawings and specifications to prepare accurate proposals. Plumbing & Piping Sales: Develop system solutions for domestic water, boilers, sanitary, storm, process, and gas piping. Support both new construction and retrofit projects with technical expertise. Translate plans and specs into accurate scopes of work and estimates. Requirements: Requirements: Proven experience in mechanical, HVAC, or plumbing/piping sales. Strong technical understanding and confidence in customer-facing discussions. Excellent communication, negotiation, and relationship-building skills. Self-motivated, organized, and results-driven. Valid driver's license with regular job site travel. Experience with CRM/ERP systems and Microsoft Office preferred. Eligibility Requirements This position requires a valid driver's license and reliable transportation. Employment/education will be verified. Applicants must be currently authorized to work in the United States on a full-time basis. Breen is a drug free workplace and requires post-offer pre-employment drug testing. Why You'll Love Working Here: Competitive base salary + commission structure. Health, dental, and vision insurance. Retirement plan. Paid time off and holidays. Vehicle stipend. Professional development and growth opportunities in a supportive, team-driven culture. Great supportive team. Breen and Sullivan complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Breen and Sullivan does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. Refrigeration: RC148185 3 Plumbing: 3378 AA/EOE PIeecd-1734
Lee Company provides core construction services of HVAC, plumbing and electrical for large and small commercial projects throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and construction excellence since 1944. Safety is a core value that permeates how we live, train, work, and look out for our teammates. Summary of Job: Manage assigned group of foremen who are responsible for mechanical construction projects; Direct and coordinate assigned personnel in accordance with the organization's policies and applicable laws. Responsibilities include planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing and resolving concerns. Education and Experience: High School diploma, GED, or equivalent (8) eight years or more related experience in the mechanical contracting industry with project experience exceeding $8M on a single project Knowledge of drafting systems Experience and proficiency with Microsoft Office Suite, as well as other applications as needed Skills and Abilities: Good analytical and problem solving skills Ability to effectively manage projects and lead team members Ability to creatively develop and design solutions Good customer service skills and effective interpersonal skills Excellent communication skills Ability to effectively manage people and on-going change Good attention to detail with emphasis on quality Good planning and organizational skills Professional demeanor Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer . Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.
12/12/2025
Full time
Lee Company provides core construction services of HVAC, plumbing and electrical for large and small commercial projects throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and construction excellence since 1944. Safety is a core value that permeates how we live, train, work, and look out for our teammates. Summary of Job: Manage assigned group of foremen who are responsible for mechanical construction projects; Direct and coordinate assigned personnel in accordance with the organization's policies and applicable laws. Responsibilities include planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing and resolving concerns. Education and Experience: High School diploma, GED, or equivalent (8) eight years or more related experience in the mechanical contracting industry with project experience exceeding $8M on a single project Knowledge of drafting systems Experience and proficiency with Microsoft Office Suite, as well as other applications as needed Skills and Abilities: Good analytical and problem solving skills Ability to effectively manage projects and lead team members Ability to creatively develop and design solutions Good customer service skills and effective interpersonal skills Excellent communication skills Ability to effectively manage people and on-going change Good attention to detail with emphasis on quality Good planning and organizational skills Professional demeanor Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer . Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.
Description: We are currently seeking a Maintenance Technician to join our team. The Maintenance Tech will assure responsive and efficient maintenance service for all LRC managed properties. As part of Lawson, recognized as a Best Places to Work in Multifamily award winner with more than fifty years of experience developing, building, and managing multifamily real estate in Virginia, you'll be valued in a supportive environment that appreciates your contributions. Lawson offers a collaborative workplace culture, competitive benefits, and ample opportunities for professional growth. Contribute to a team dedicated to providing exceptional living experiences for our residents while advancing your career! Duties/Responsibilities: Service Request Perform, with good workmanship, all assigned projects in a timely manner Perform as on-call emergency service technician as directed Repair/replace HVAC systems and components, gas and electric appliances, glass, wall tile, floor coverings, sub floors, fixtures, blinds, exterior building coverings, playgrounds, mailbox clusters, sidewalks, asphalt and locks etc. Perform plumbing, electrical, painting, concrete, masonry, minor extermination and carpentry work etc. Preventative maintenance follow preventive maintenance procedures Customer satisfaction Ensure the completion of work requests within twenty-four (24) hours Report all resident complaints and/or resident work requests to Supervisor Other duties as assigned Requirements: Required Skills/Abilities: Mechanical aptitude Formal training in one or more of the following trades: carpentry, plumbing, electrical, painting, drywall installation or air conditioning All applicable certifications must be obtained within the first year of employment. Good human relation skills to deal with tenants, peers, and supervisors. Licensed driver with good driving record, preferred Ability to drive a golf cart. Be available to report to work during any inclement weather event for property clean up and emergencies. Enthusiasm, good attitude, trustworthiness, personal integrity, and honesty Education and Experience: High School diploma or equivalent minimum of one (1) year maintenance trade experience Possess minimum Type I & II CFC Refrigerant Certification in accordance with 40CFR Part 82, Subpart F or possess the ability to obtain the designation within one (1) years' time Physical Functions Bending, kneeling, stretching, climbing stairs and ladders, squatting, lifting up to sixty (60) pounds, running and lifting over sixty (60) pounds occasionally. The Lawson Companies is an equal opportunity employer that offers full-time employees a competitive package that includes, but is not limited to, medical, dental, vision, life insurance, 401K options, PTO, a competitive salary, and a project bonus structure. PI00c1d8d776fd-9300
12/12/2025
Full time
Description: We are currently seeking a Maintenance Technician to join our team. The Maintenance Tech will assure responsive and efficient maintenance service for all LRC managed properties. As part of Lawson, recognized as a Best Places to Work in Multifamily award winner with more than fifty years of experience developing, building, and managing multifamily real estate in Virginia, you'll be valued in a supportive environment that appreciates your contributions. Lawson offers a collaborative workplace culture, competitive benefits, and ample opportunities for professional growth. Contribute to a team dedicated to providing exceptional living experiences for our residents while advancing your career! Duties/Responsibilities: Service Request Perform, with good workmanship, all assigned projects in a timely manner Perform as on-call emergency service technician as directed Repair/replace HVAC systems and components, gas and electric appliances, glass, wall tile, floor coverings, sub floors, fixtures, blinds, exterior building coverings, playgrounds, mailbox clusters, sidewalks, asphalt and locks etc. Perform plumbing, electrical, painting, concrete, masonry, minor extermination and carpentry work etc. Preventative maintenance follow preventive maintenance procedures Customer satisfaction Ensure the completion of work requests within twenty-four (24) hours Report all resident complaints and/or resident work requests to Supervisor Other duties as assigned Requirements: Required Skills/Abilities: Mechanical aptitude Formal training in one or more of the following trades: carpentry, plumbing, electrical, painting, drywall installation or air conditioning All applicable certifications must be obtained within the first year of employment. Good human relation skills to deal with tenants, peers, and supervisors. Licensed driver with good driving record, preferred Ability to drive a golf cart. Be available to report to work during any inclement weather event for property clean up and emergencies. Enthusiasm, good attitude, trustworthiness, personal integrity, and honesty Education and Experience: High School diploma or equivalent minimum of one (1) year maintenance trade experience Possess minimum Type I & II CFC Refrigerant Certification in accordance with 40CFR Part 82, Subpart F or possess the ability to obtain the designation within one (1) years' time Physical Functions Bending, kneeling, stretching, climbing stairs and ladders, squatting, lifting up to sixty (60) pounds, running and lifting over sixty (60) pounds occasionally. The Lawson Companies is an equal opportunity employer that offers full-time employees a competitive package that includes, but is not limited to, medical, dental, vision, life insurance, 401K options, PTO, a competitive salary, and a project bonus structure. PI00c1d8d776fd-9300
