JOB SUMMARY This is an Operations position responsible for overseeing the safe operation, daily monitoring, and maintenance activities associated with Material Handling Equipment (MHE), and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Proficient in electrical meter testing Knowledge of controls and electric (AC - alternative current & DC - direct current low voltage) Understanding and working knowledge of PLC's (programming logic controller) and PLC troubleshooting Motors and Motor starter knowledge (AC & DC) Motor starter knowledge Contactor and relay knowledge and repair Complete electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet, checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, PM per manufacturers recommendations Knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems Knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanisms, steering systems, suspension systems Completes all special projects associated with building or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries, perform all other duties as assigned Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation Train and mentor MHE Tech I and II QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Six years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved a defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Trade electrical I & II training (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/24/2026
Full time
JOB SUMMARY This is an Operations position responsible for overseeing the safe operation, daily monitoring, and maintenance activities associated with Material Handling Equipment (MHE), and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Proficient in electrical meter testing Knowledge of controls and electric (AC - alternative current & DC - direct current low voltage) Understanding and working knowledge of PLC's (programming logic controller) and PLC troubleshooting Motors and Motor starter knowledge (AC & DC) Motor starter knowledge Contactor and relay knowledge and repair Complete electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet, checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, PM per manufacturers recommendations Knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems Knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanisms, steering systems, suspension systems Completes all special projects associated with building or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries, perform all other duties as assigned Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation Train and mentor MHE Tech I and II QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Six years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved a defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Trade electrical I & II training (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
At Bath & Body Works, we believe everybody deserves to feel good. When you join us, you're part of more than an iconic fragrance and personal care brand - you become part of Gingham Nation, where people are at the center of everything we do. We believe great associate experiences create great consumer experiences. When our associates feel supported, inspired and empowered, consumers feel it. Whether you're starting your career or building your next chapter, we invest in your growth so you can learn, lead and help create feel good moments every day. Summary The Control Technician performs a variety of maintenance, modification, and repair activities in controls of all building equipment and material handling systems in the distribution centers. This includes troubleshooting and repairing AC & DC circuits, photo eye sensors, encoders, programmable logic controllers, and bar code readers. Responsibilities Duties are illustrative and not inclusive and may vary with individual assignments Follow lockout-tag out procedures, confined space procedures, and other safety and environmental procedures and policies as required Perform program changes, monitoring of PLC (Programmable Logic Controllers) and PMS (Process Management Systems) Troubleshoot issues of all Controls, Process Controllers, Control Cabinets, Power Supplies and all other field devices Performs skilled and semi-skilled maintenance activities including performing material handling equipment troubleshooting and repair; office furniture moves and setups Completes work orders for work performed and includes parts and inventory used Document all work order activities to follow MP2 requirements, providing detailed records of the activities performed Ability to solve and repair low and high voltage controls including fuses, relays, wiring, contactors and power supplies from the source to the field device Ability to read and comprehend technical manuals and schematics, to include blueprints Experience using electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing) Qualifications and Experience Minimum of 2 year(s) industrial maintenance experience with PLC's, conveyors, controls, and Operating Systems Electrical experience with high and low voltage, AC and DC Demonstrable record of strong mechanical and electrical troubleshooting Knowledge of Automatic Identification systems (Laser and Camera Scanning Devices) Strong systems or technical capability including PC software and hardware proficiency Experience in programming and supervising Programmable Logic Controllers such as (Allen/Bradley, Siemens etc.) Ability to read and comprehend technical manuals and schematics Ability to read blueprints Support overtime work as required Possession of a valid driver's license and a satisfactory driving record Education Posession of a high school diploma or equivalent experience Core Competencies Lead with Curiosity & Humility Build High Performing Teams for Today & Tomorrow Influence & Inspire with Vision & Purpose Observe, Engage & Connect Strive to Achieve Operational Excellence Deliver Business Results Benefits Bath & Body Works associates are the heart of our business. That's why we're proud to offer benefits that empower you to Dream Bigger & Live Brighter. Benefits for eligible associates include: Robust medical, pharmacy, dental and vision coverage. Plus, access to our onsite wellness center and pharmacy located at the Columbus, OH home office. 401k with company match and Associate Stock Purchase program with discount No-cost mental health and wellbeing support through our Employee Assistance Program (EAP) Opportunity for paid time off and paid parental leave. Plus, access to family and lifestyle programs including a family building benefit, childcare discounts, and home, auto and pet insurance. Tuition reimbursement and scholarship opportunities for post-secondary education programs 40% merchandise discount and gratis that encourages you to come back to your senses! Visit for more details. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We will consider for employment all qualified applicants, including those with arrest records, conviction records, or other criminal histories, in a manner consistent with the requirements of any applicable state and local laws. Please see links: Los Angeles Fair Chance In Hiring Ordinance , Philadelphia Fair Chance Law , San Francisco Fair Chance Ordinance . We are an equal opportunity employer. We do not make employment decisions based on an individual's race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all vacancy/vacancies are filled.
07/24/2026
Full time
At Bath & Body Works, we believe everybody deserves to feel good. When you join us, you're part of more than an iconic fragrance and personal care brand - you become part of Gingham Nation, where people are at the center of everything we do. We believe great associate experiences create great consumer experiences. When our associates feel supported, inspired and empowered, consumers feel it. Whether you're starting your career or building your next chapter, we invest in your growth so you can learn, lead and help create feel good moments every day. Summary The Control Technician performs a variety of maintenance, modification, and repair activities in controls of all building equipment and material handling systems in the distribution centers. This includes troubleshooting and repairing AC & DC circuits, photo eye sensors, encoders, programmable logic controllers, and bar code readers. Responsibilities Duties are illustrative and not inclusive and may vary with individual assignments Follow lockout-tag out procedures, confined space procedures, and other safety and environmental procedures and policies as required Perform program changes, monitoring of PLC (Programmable Logic Controllers) and PMS (Process Management Systems) Troubleshoot issues of all Controls, Process Controllers, Control Cabinets, Power Supplies and all other field devices Performs skilled and semi-skilled maintenance activities including performing material handling equipment troubleshooting and repair; office furniture moves and setups Completes work orders for work performed and includes parts and inventory used Document all work order activities to follow MP2 requirements, providing detailed records of the activities performed Ability to solve and repair low and high voltage controls including fuses, relays, wiring, contactors and power supplies from the source to the field device Ability to read and comprehend technical manuals and schematics, to include blueprints Experience using electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing) Qualifications and Experience Minimum of 2 year(s) industrial maintenance experience with PLC's, conveyors, controls, and Operating Systems Electrical experience with high and low voltage, AC and DC Demonstrable record of strong mechanical and electrical troubleshooting Knowledge of Automatic Identification systems (Laser and Camera Scanning Devices) Strong systems or technical capability including PC software and hardware proficiency Experience in programming and supervising Programmable Logic Controllers such as (Allen/Bradley, Siemens etc.) Ability to read and comprehend technical manuals and schematics Ability to read blueprints Support overtime work as required Possession of a valid driver's license and a satisfactory driving record Education Posession of a high school diploma or equivalent experience Core Competencies Lead with Curiosity & Humility Build High Performing Teams for Today & Tomorrow Influence & Inspire with Vision & Purpose Observe, Engage & Connect Strive to Achieve Operational Excellence Deliver Business Results Benefits Bath & Body Works associates are the heart of our business. That's why we're proud to offer benefits that empower you to Dream Bigger & Live Brighter. Benefits for eligible associates include: Robust medical, pharmacy, dental and vision coverage. Plus, access to our onsite wellness center and pharmacy located at the Columbus, OH home office. 401k with company match and Associate Stock Purchase program with discount No-cost mental health and wellbeing support through our Employee Assistance Program (EAP) Opportunity for paid time off and paid parental leave. Plus, access to family and lifestyle programs including a family building benefit, childcare discounts, and home, auto and pet insurance. Tuition reimbursement and scholarship opportunities for post-secondary education programs 40% merchandise discount and gratis that encourages you to come back to your senses! Visit for more details. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We will consider for employment all qualified applicants, including those with arrest records, conviction records, or other criminal histories, in a manner consistent with the requirements of any applicable state and local laws. Please see links: Los Angeles Fair Chance In Hiring Ordinance , Philadelphia Fair Chance Law , San Francisco Fair Chance Ordinance . We are an equal opportunity employer. We do not make employment decisions based on an individual's race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all vacancy/vacancies are filled.
At Bath & Body Works, we believe everybody deserves to feel good. When you join us, you're part of more than an iconic fragrance and personal care brand - you become part of Gingham Nation, where people are at the center of everything we do. We believe great associate experiences create great consumer experiences. When our associates feel supported, inspired and empowered, consumers feel it. Whether you're starting your career or building your next chapter, we invest in your growth so you can learn, lead and help create feel good moments every day. Summary The Control Technician performs a variety of maintenance, modification, and repair activities in controls of all building equipment and material handling systems in the distribution centers. This includes troubleshooting and repairing AC & DC circuits, photo eye sensors, encoders, programmable logic controllers, and bar code readers. Responsibilities Duties are illustrative and not inclusive and may vary with individual assignments Follow lockout-tag out procedures, confined space procedures, and other safety and environmental procedures and policies as required Perform program changes, monitoring of PLC (Programmable Logic Controllers) and PMS (Process Management Systems) Troubleshoot issues of all Controls, Process Controllers, Control Cabinets, Power Supplies and all other field devices Performs skilled and semi-skilled maintenance activities including performing material handling equipment troubleshooting and repair; office furniture moves and setups Completes work orders for work performed and includes parts and inventory used Document all work order activities to follow MP2 requirements, providing detailed records of the activities performed Ability to solve and repair low and high voltage controls including fuses, relays, wiring, contactors and power supplies from the source to the field device Ability to read and comprehend technical manuals and schematics, to include blueprints Experience using electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing) Qualifications and Experience Minimum of 2 year(s) industrial maintenance experience with PLC's, conveyors, controls, and Operating Systems Electrical experience with high and low voltage, AC and DC Demonstrable record of strong mechanical and electrical troubleshooting Knowledge of Automatic Identification systems (Laser and Camera Scanning Devices) Strong systems or technical capability including PC software and hardware proficiency Experience in programming and supervising Programmable Logic Controllers such as (Allen/Bradley, Siemens etc.) Ability to read and comprehend technical manuals and schematics Ability to read blueprints Support overtime work as required Possession of a valid driver's license and a satisfactory driving record Education Posession of a high school diploma or equivalent experience Core Competencies Lead with Curiosity & Humility Build High Performing Teams for Today & Tomorrow Influence & Inspire with Vision & Purpose Observe, Engage & Connect Strive to Achieve Operational Excellence Deliver Business Results Benefits Bath & Body Works associates are the heart of our business. That's why we're proud to offer benefits that empower you to Dream Bigger & Live Brighter. Benefits for eligible associates include: Robust medical, pharmacy, dental and vision coverage. Plus, access to our onsite wellness center and pharmacy located at the Columbus, OH home office. 401k with company match and Associate Stock Purchase program with discount No-cost mental health and wellbeing support through our Employee Assistance Program (EAP) Opportunity for paid time off and paid parental leave. Plus, access to family and lifestyle programs including a family building benefit, childcare discounts, and home, auto and pet insurance. Tuition reimbursement and scholarship opportunities for post-secondary education programs 40% merchandise discount and gratis that encourages you to come back to your senses! Visit for more details. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We will consider for employment all qualified applicants, including those with arrest records, conviction records, or other criminal histories, in a manner consistent with the requirements of any applicable state and local laws. Please see links: Los Angeles Fair Chance In Hiring Ordinance , Philadelphia Fair Chance Law , San Francisco Fair Chance Ordinance . We are an equal opportunity employer. We do not make employment decisions based on an individual's race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all vacancy/vacancies are filled.
07/24/2026
Full time
At Bath & Body Works, we believe everybody deserves to feel good. When you join us, you're part of more than an iconic fragrance and personal care brand - you become part of Gingham Nation, where people are at the center of everything we do. We believe great associate experiences create great consumer experiences. When our associates feel supported, inspired and empowered, consumers feel it. Whether you're starting your career or building your next chapter, we invest in your growth so you can learn, lead and help create feel good moments every day. Summary The Control Technician performs a variety of maintenance, modification, and repair activities in controls of all building equipment and material handling systems in the distribution centers. This includes troubleshooting and repairing AC & DC circuits, photo eye sensors, encoders, programmable logic controllers, and bar code readers. Responsibilities Duties are illustrative and not inclusive and may vary with individual assignments Follow lockout-tag out procedures, confined space procedures, and other safety and environmental procedures and policies as required Perform program changes, monitoring of PLC (Programmable Logic Controllers) and PMS (Process Management Systems) Troubleshoot issues of all Controls, Process Controllers, Control Cabinets, Power Supplies and all other field devices Performs skilled and semi-skilled maintenance activities including performing material handling equipment troubleshooting and repair; office furniture moves and setups Completes work orders for work performed and includes parts and inventory used Document all work order activities to follow MP2 requirements, providing detailed records of the activities performed Ability to solve and repair low and high voltage controls including fuses, relays, wiring, contactors and power supplies from the source to the field device Ability to read and comprehend technical manuals and schematics, to include blueprints Experience using electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing) Qualifications and Experience Minimum of 2 year(s) industrial maintenance experience with PLC's, conveyors, controls, and Operating Systems Electrical experience with high and low voltage, AC and DC Demonstrable record of strong mechanical and electrical troubleshooting Knowledge of Automatic Identification systems (Laser and Camera Scanning Devices) Strong systems or technical capability including PC software and hardware proficiency Experience in programming and supervising Programmable Logic Controllers such as (Allen/Bradley, Siemens etc.) Ability to read and comprehend technical manuals and schematics Ability to read blueprints Support overtime work as required Possession of a valid driver's license and a satisfactory driving record Education Posession of a high school diploma or equivalent experience Core Competencies Lead with Curiosity & Humility Build High Performing Teams for Today & Tomorrow Influence & Inspire with Vision & Purpose Observe, Engage & Connect Strive to Achieve Operational Excellence Deliver Business Results Benefits Bath & Body Works associates are the heart of our business. That's why we're proud to offer benefits that empower you to Dream Bigger & Live Brighter. Benefits for eligible associates include: Robust medical, pharmacy, dental and vision coverage. Plus, access to our onsite wellness center and pharmacy located at the Columbus, OH home office. 401k with company match and Associate Stock Purchase program with discount No-cost mental health and wellbeing support through our Employee Assistance Program (EAP) Opportunity for paid time off and paid parental leave. Plus, access to family and lifestyle programs including a family building benefit, childcare discounts, and home, auto and pet insurance. Tuition reimbursement and scholarship opportunities for post-secondary education programs 40% merchandise discount and gratis that encourages you to come back to your senses! Visit for more details. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We will consider for employment all qualified applicants, including those with arrest records, conviction records, or other criminal histories, in a manner consistent with the requirements of any applicable state and local laws. Please see links: Los Angeles Fair Chance In Hiring Ordinance , Philadelphia Fair Chance Law , San Francisco Fair Chance Ordinance . We are an equal opportunity employer. We do not make employment decisions based on an individual's race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all vacancy/vacancies are filled.
At Bath & Body Works, we believe everybody deserves to feel good. When you join us, you're part of more than an iconic fragrance and personal care brand - you become part of Gingham Nation, where people are at the center of everything we do. We believe great associate experiences create great consumer experiences. When our associates feel supported, inspired and empowered, consumers feel it. Whether you're starting your career or building your next chapter, we invest in your growth so you can learn, lead and help create feel good moments every day. Summary The Control Technician performs a variety of maintenance, modification, and repair activities in controls of all building equipment and material handling systems in the distribution centers. This includes troubleshooting and repairing AC & DC circuits, photo eye sensors, encoders, programmable logic controllers, and bar code readers. Responsibilities Duties are illustrative and not inclusive and may vary with individual assignments Follow lockout-tag out procedures, confined space procedures, and other safety and environmental procedures and policies as required Perform program changes, monitoring of PLC (Programmable Logic Controllers) and PMS (Process Management Systems) Troubleshoot issues of all Controls, Process Controllers, Control Cabinets, Power Supplies and all other field devices Performs skilled and semi-skilled maintenance activities including performing material handling equipment troubleshooting and repair; office furniture moves and setups Completes work orders for work performed and includes parts and inventory used Document all work order activities to follow MP2 requirements, providing detailed records of the activities performed Ability to solve and repair low and high voltage controls including fuses, relays, wiring, contactors and power supplies from the source to the field device Ability to read and comprehend technical manuals and schematics, to include blueprints Experience using electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing) Qualifications and Experience Minimum of 2 year(s) industrial maintenance experience with PLC's, conveyors, controls, and Operating Systems Electrical experience with high and low voltage, AC and DC Demonstrable record of strong mechanical and electrical troubleshooting Knowledge of Automatic Identification systems (Laser and Camera Scanning Devices) Strong systems or technical capability including PC software and hardware proficiency Experience in programming and supervising Programmable Logic Controllers such as (Allen/Bradley, Siemens etc.) Ability to read and comprehend technical manuals and schematics Ability to read blueprints Support overtime work as required Possession of a valid driver's license and a satisfactory driving record Education Posession of a high school diploma or equivalent experience Core Competencies Lead with Curiosity & Humility Build High Performing Teams for Today & Tomorrow Influence & Inspire with Vision & Purpose Observe, Engage & Connect Strive to Achieve Operational Excellence Deliver Business Results Benefits Bath & Body Works associates are the heart of our business. That's why we're proud to offer benefits that empower you to Dream Bigger & Live Brighter. Benefits for eligible associates include: Robust medical, pharmacy, dental and vision coverage. Plus, access to our onsite wellness center and pharmacy located at the Columbus, OH home office. 401k with company match and Associate Stock Purchase program with discount No-cost mental health and wellbeing support through our Employee Assistance Program (EAP) Opportunity for paid time off and paid parental leave. Plus, access to family and lifestyle programs including a family building benefit, childcare discounts, and home, auto and pet insurance. Tuition reimbursement and scholarship opportunities for post-secondary education programs 40% merchandise discount and gratis that encourages you to come back to your senses! Visit for more details. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We will consider for employment all qualified applicants, including those with arrest records, conviction records, or other criminal histories, in a manner consistent with the requirements of any applicable state and local laws. Please see links: Los Angeles Fair Chance In Hiring Ordinance , Philadelphia Fair Chance Law , San Francisco Fair Chance Ordinance . We are an equal opportunity employer. We do not make employment decisions based on an individual's race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all vacancy/vacancies are filled.
07/24/2026
Full time
At Bath & Body Works, we believe everybody deserves to feel good. When you join us, you're part of more than an iconic fragrance and personal care brand - you become part of Gingham Nation, where people are at the center of everything we do. We believe great associate experiences create great consumer experiences. When our associates feel supported, inspired and empowered, consumers feel it. Whether you're starting your career or building your next chapter, we invest in your growth so you can learn, lead and help create feel good moments every day. Summary The Control Technician performs a variety of maintenance, modification, and repair activities in controls of all building equipment and material handling systems in the distribution centers. This includes troubleshooting and repairing AC & DC circuits, photo eye sensors, encoders, programmable logic controllers, and bar code readers. Responsibilities Duties are illustrative and not inclusive and may vary with individual assignments Follow lockout-tag out procedures, confined space procedures, and other safety and environmental procedures and policies as required Perform program changes, monitoring of PLC (Programmable Logic Controllers) and PMS (Process Management Systems) Troubleshoot issues of all Controls, Process Controllers, Control Cabinets, Power Supplies and all other field devices Performs skilled and semi-skilled maintenance activities including performing material handling equipment troubleshooting and repair; office furniture moves and setups Completes work orders for work performed and includes parts and inventory used Document all work order activities to follow MP2 requirements, providing detailed records of the activities performed Ability to solve and repair low and high voltage controls including fuses, relays, wiring, contactors and power supplies from the source to the field device Ability to read and comprehend technical manuals and schematics, to include blueprints Experience using electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing) Qualifications and Experience Minimum of 2 year(s) industrial maintenance experience with PLC's, conveyors, controls, and Operating Systems Electrical experience with high and low voltage, AC and DC Demonstrable record of strong mechanical and electrical troubleshooting Knowledge of Automatic Identification systems (Laser and Camera Scanning Devices) Strong systems or technical capability including PC software and hardware proficiency Experience in programming and supervising Programmable Logic Controllers such as (Allen/Bradley, Siemens etc.) Ability to read and comprehend technical manuals and schematics Ability to read blueprints Support overtime work as required Possession of a valid driver's license and a satisfactory driving record Education Posession of a high school diploma or equivalent experience Core Competencies Lead with Curiosity & Humility Build High Performing Teams for Today & Tomorrow Influence & Inspire with Vision & Purpose Observe, Engage & Connect Strive to Achieve Operational Excellence Deliver Business Results Benefits Bath & Body Works associates are the heart of our business. That's why we're proud to offer benefits that empower you to Dream Bigger & Live Brighter. Benefits for eligible associates include: Robust medical, pharmacy, dental and vision coverage. Plus, access to our onsite wellness center and pharmacy located at the Columbus, OH home office. 401k with company match and Associate Stock Purchase program with discount No-cost mental health and wellbeing support through our Employee Assistance Program (EAP) Opportunity for paid time off and paid parental leave. Plus, access to family and lifestyle programs including a family building benefit, childcare discounts, and home, auto and pet insurance. Tuition reimbursement and scholarship opportunities for post-secondary education programs 40% merchandise discount and gratis that encourages you to come back to your senses! Visit for more details. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We will consider for employment all qualified applicants, including those with arrest records, conviction records, or other criminal histories, in a manner consistent with the requirements of any applicable state and local laws. Please see links: Los Angeles Fair Chance In Hiring Ordinance , Philadelphia Fair Chance Law , San Francisco Fair Chance Ordinance . We are an equal opportunity employer. We do not make employment decisions based on an individual's race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all vacancy/vacancies are filled.
Join the winning TEAM with a bright future! TLR Group is PROUD to announce that we have been awarded: National Apartment Association's Best Places to Work "Best Places to Work List 2021" Tampa Bay Business Journal's "Fast 50 - Fastest Growing Companies 2020" (TLR Ranked 12th) Tampa Bay Business Journal's "Fast 50 - Fastest Growing Companies 2021" (TLR Ranked 25th) Bay Area Apartment Association - Gold Medallion Award for Diversity & Inclusion Initiative Award 2021 BONUSES Special Event Bonuses: Purchase of Primary Residence, Wedding, Birth of a Child and more Your birthday is always a holiday (PTO) Apartment discounts for all employees BENEFITS & PERKS 10 Days of Paid Annual Vacation (increases with seniority) Birthday Paid Day Off 6 Paid Holidays Flexible Schedule 401(K) Retirement Savings Plan with Company Match Ongoing Training Internal Opportunities for Career Advancement Competitive Compensation & Earnings Potential Bonus Opportunities Discounted Rent at a TLR Owned Property Medical Dental Vision Employer Paid Life Long Term Disability FSA with Transit Option TEXT TO APPLY: Use Code: MainTech0713 SUMMARY The Maintenance Technician - HVAC is to maintain the physical integrity of the community. This involves ensuring a safe, secure, and comfortable living environment for residents, visitors, and staff. In the absence of a maintenance supervisor, the Maintenance Technician -HVAC will assume all maintenance responsibilities. DUTIES AND RESPONSIBILITIES The Maintenance Technician - HVAC performs (or coordinates as authorized) all maintenance activities of apartment community(s) including repairs, preventative maintenance, installations, and construction in a timely manner and according to company policies and procedures to maximize the property's property occupancy and return-on-investment. Completes service requests within 24 hours Participated in an ongoing community improvement plan and preventative maintenance program Performs trash-outs and make-readies to ensure units are ready for future residents as quickly as possible Changes lock and make keys Removes and transfers heavy appliances and equipment from storage area to apartment (or vice versa) as circumstances warrant; assists in moving abandoned furniture, appliances, etc. to a dumpster when necessary Diagnoses and performs maintenance/repair, as directed, involving the following a daily basis: Maintenance Technician keeps property common areas and grounds neat and free of litter. Performs routine grounds keeping when necessary, weeds, rakes, sweeps, shovels, as circumstances warrant Maintenance Technician ensures that storage areas, vacant units, etc. remain locked when not in use Maintenance Technician responsible for the thorough knowledge, implementation, and enforcement of pertinent laws and EPA and OSHA regulations governing proper use, storage, and management of hazardous materials, including solvents, flammables, caustics, and freon Maintenance Technician maintains a courteous and helpful demeanor with residents, prospective residents, co-workers, vendors, etc. Assists with resident functions as required Acts as a team member with all associates of the management staff Maintenance Technician must adhere to schedule, be prompt, on time to work, and have good, regular attendance. Must have a reliable mode of transportation at all hours. The job will require a response to emergency calls outside of "business hours", trips to pick up supplies, etc. and may require travel to perform work at other properties in the geographic area Must have a mode of communication in which to be contacted at home and to respond in cases of emergency Maintenance Technician responsible for reporting any unusual or extraordinary circumstances regarding the residents or the property Maintenance Technician responsible for seeking educational opportunities and information to stay updated on current best practices and regulations related to job duties Maintenance Technician must be willing to perform work at or be assigned to other communities as needed. Must be available and willing to answer 24- hour maintenance emergency calls Other duties as assigned EDUCATIONAL/TECHNICAL REQUIREMENTS Up-to-Date Universal type EPA Certification required from an approved and licensed authority HVAC (Heating, Ventilation, and Air Conditioning Certification) License Swimming Pool Certification not required, but a plus At least 1-year experience in apartment maintenance or similar field A high school diploma or equivalent and professional knowledge of trades/maintenance discipline are required Must possess and maintain a valid driver's license (as applicable by the property) PHYSICAL DEMANDS/WORKING CONDITIONS: Constant need (66% to 100% of the time) to be on feet. Constant need (66% to 100% of the time) to perform the following physical activities: Bent/Stoop/Squat/Kneel Perform - routine maintenance/repairs, pick up tools, and needed equipment. Climb Stairs - Service requests, make-ready needs for 2nd and 3rd-floor apartments. Push or Pull - Move equipment, appliances, open/close doors, etc. Reach above Shoulder - Perform routine maintenance/repairs, stock, and remove equipment, parts, etc. Climb Ladders - Perform routine maintenance/repairs. Grasp/Grip/Turning - Handle tools and equipment, perform routine maintenance/repairs. Finger Dexterity - Handle tools and equipment, perform routine maintenance/repairs. Writing - inventory maintenance, requisition requests, required maintenance reports. Lifting/carrying (supplies, replacement parts, ladders, etc.): Over 150 lbs. - Rare need (less than 1% of the time) 75-150 lbs. - Occasional need (1% to 33% of the time) 25-75 lbs. - Frequent need (33% to 66% of the time) 1-25 lbs. - Constant need (66% to 100% of the time) PIe5-
07/24/2026
Full time
Join the winning TEAM with a bright future! TLR Group is PROUD to announce that we have been awarded: National Apartment Association's Best Places to Work "Best Places to Work List 2021" Tampa Bay Business Journal's "Fast 50 - Fastest Growing Companies 2020" (TLR Ranked 12th) Tampa Bay Business Journal's "Fast 50 - Fastest Growing Companies 2021" (TLR Ranked 25th) Bay Area Apartment Association - Gold Medallion Award for Diversity & Inclusion Initiative Award 2021 BONUSES Special Event Bonuses: Purchase of Primary Residence, Wedding, Birth of a Child and more Your birthday is always a holiday (PTO) Apartment discounts for all employees BENEFITS & PERKS 10 Days of Paid Annual Vacation (increases with seniority) Birthday Paid Day Off 6 Paid Holidays Flexible Schedule 401(K) Retirement Savings Plan with Company Match Ongoing Training Internal Opportunities for Career Advancement Competitive Compensation & Earnings Potential Bonus Opportunities Discounted Rent at a TLR Owned Property Medical Dental Vision Employer Paid Life Long Term Disability FSA with Transit Option TEXT TO APPLY: Use Code: MainTech0713 SUMMARY The Maintenance Technician - HVAC is to maintain the physical integrity of the community. This involves ensuring a safe, secure, and comfortable living environment for residents, visitors, and staff. In the absence of a maintenance supervisor, the Maintenance Technician -HVAC will assume all maintenance responsibilities. DUTIES AND RESPONSIBILITIES The Maintenance Technician - HVAC performs (or coordinates as authorized) all maintenance activities of apartment community(s) including repairs, preventative maintenance, installations, and construction in a timely manner and according to company policies and procedures to maximize the property's property occupancy and return-on-investment. Completes service requests within 24 hours Participated in an ongoing community improvement plan and preventative maintenance program Performs trash-outs and make-readies to ensure units are ready for future residents as quickly as possible Changes lock and make keys Removes and transfers heavy appliances and equipment from storage area to apartment (or vice versa) as circumstances warrant; assists in moving abandoned furniture, appliances, etc. to a dumpster when necessary Diagnoses and performs maintenance/repair, as directed, involving the following a daily basis: Maintenance Technician keeps property common areas and grounds neat and free of litter. Performs routine grounds keeping when necessary, weeds, rakes, sweeps, shovels, as circumstances warrant Maintenance Technician ensures that storage areas, vacant units, etc. remain locked when not in use Maintenance Technician responsible for the thorough knowledge, implementation, and enforcement of pertinent laws and EPA and OSHA regulations governing proper use, storage, and management of hazardous materials, including solvents, flammables, caustics, and freon Maintenance Technician maintains a courteous and helpful demeanor with residents, prospective residents, co-workers, vendors, etc. Assists with resident functions as required Acts as a team member with all associates of the management staff Maintenance Technician must adhere to schedule, be prompt, on time to work, and have good, regular attendance. Must have a reliable mode of transportation at all hours. The job will require a response to emergency calls outside of "business hours", trips to pick up supplies, etc. and may require travel to perform work at other properties in the geographic area Must have a mode of communication in which to be contacted at home and to respond in cases of emergency Maintenance Technician responsible for reporting any unusual or extraordinary circumstances regarding the residents or the property Maintenance Technician responsible for seeking educational opportunities and information to stay updated on current best practices and regulations related to job duties Maintenance Technician must be willing to perform work at or be assigned to other communities as needed. Must be available and willing to answer 24- hour maintenance emergency calls Other duties as assigned EDUCATIONAL/TECHNICAL REQUIREMENTS Up-to-Date Universal type EPA Certification required from an approved and licensed authority HVAC (Heating, Ventilation, and Air Conditioning Certification) License Swimming Pool Certification not required, but a plus At least 1-year experience in apartment maintenance or similar field A high school diploma or equivalent and professional knowledge of trades/maintenance discipline are required Must possess and maintain a valid driver's license (as applicable by the property) PHYSICAL DEMANDS/WORKING CONDITIONS: Constant need (66% to 100% of the time) to be on feet. Constant need (66% to 100% of the time) to perform the following physical activities: Bent/Stoop/Squat/Kneel Perform - routine maintenance/repairs, pick up tools, and needed equipment. Climb Stairs - Service requests, make-ready needs for 2nd and 3rd-floor apartments. Push or Pull - Move equipment, appliances, open/close doors, etc. Reach above Shoulder - Perform routine maintenance/repairs, stock, and remove equipment, parts, etc. Climb Ladders - Perform routine maintenance/repairs. Grasp/Grip/Turning - Handle tools and equipment, perform routine maintenance/repairs. Finger Dexterity - Handle tools and equipment, perform routine maintenance/repairs. Writing - inventory maintenance, requisition requests, required maintenance reports. Lifting/carrying (supplies, replacement parts, ladders, etc.): Over 150 lbs. - Rare need (less than 1% of the time) 75-150 lbs. - Occasional need (1% to 33% of the time) 25-75 lbs. - Frequent need (33% to 66% of the time) 1-25 lbs. - Constant need (66% to 100% of the time) PIe5-
Technician Starting Pay: $21.00 - $22.00 per hour, based on experience Technician Schedule: Monday through Friday, weekends off Ready to put your technical skills to work with a company that values service, problem-solving, and doing the job right? Brame is looking for a Machine Repair and Commercial Laundry Technician to join our growing service team and help customers keep their facilities running clean, safe, and efficient. In this hands-on, field-based role, you will diagnose, repair, maintain, and support commercial floor care machines and commercial laundry chemical dispensing systems at customer locations. You will work independently, solve real problems in the field, and represent Brame through reliable service, clear communication, and a customer-first attitude. This is a great opportunity for someone who enjoys mechanical and electro-mechanical troubleshooting, takes pride in quality work, and wants the independence of a field service role with the support of a respected, family-owned company. A company service van will be provided, and you will have the flexibility to start your day from home. What You'll Do as a Technician Troubleshoot, diagnose, repair, and maintain commercial floor care machines and related equipment in the field. Service, troubleshoot, and repair commercial laundry chemical dispensing systems, pumps, controllers, tubing, and related components. Install replacement parts and complete repairs safely, accurately, and efficiently. Use schematic drawings, service information, and technical resources to identify problems and determine the best repair solution. Communicate clearly with customers regarding equipment status, repair recommendations, completed work, and next steps. Accurately document service activity, including labor, parts, materials, mileage, fuel purchases, and daily work completed. Update schedules, service activity, and daily reports in the company service management system. Maintain tools, parts, service equipment, and the company service van in clean, safe, organized, and working condition. Stock the service van with necessary tools, parts, and equipment to support timely repairs and reduce return trips. Load, unload, transport, and handle tools, equipment, motors, parts, and materials as needed. Partner with the service manager, parts team, vendors, and teammates to keep repairs moving and customers supported. Follow all safety procedures, wear required PPE, and help maintain a safe and clean work environment. Participate in quality improvement efforts and contribute ideas that help improve service, efficiency, and the customer experience. Perform required administrative tasks, reports, and correspondence. Perform other duties as assigned by the manager. What We're Looking For Valid driver's license with REAL ID and a safe driving record. Prior experience servicing and repairing commercial floor care equipment, commercial laundry equipment, chemical dispensing pumps, or related electro-mechanical systems is preferred. Strong electro mechanical aptitude and hands on troubleshooting ability are required. Background in mechanical, electrical, plumbing, equipment repair, machine repair, or electro mechanical maintenance is strongly preferred. Ability to read or work from schematic drawings and service information is a plus. Comfortable using basic computer tools, Microsoft Outlook, and service management software. Able to work independently, manage your day, stay organized, and adapt when priorities change. Strong written and verbal communication skills with a professional, customer first mindset. Strong problem solving skills and the ability to prioritize, troubleshoot, and follow through. Detail oriented, dependable, proactive, and self directed. Able to work effectively with limited supervision and as part of a team. Committed to quality, safety, professionalism, and excellent customer service. Steel-toe or composite toe shoes are required. Able to pass company background screening, motor vehicle report review, and drug testing requirements. Physical Requirements for a Technician Lift and carry up to 50 pounds without assistance. Carry tools, motors, equipment, parts, and related materials into customer facilities, including extended walking distances and stair use when needed. Stoop, bend, kneel, climb, crawl, and work around or under machines, tables, pipes, buckets, and equipment as needed. Drive for extended periods as part of daily travel to customer locations. Wear required personal protective equipment when needed. Work overtime as needed, including occasional overnight travel. Benefits Medical, dental, and vision coverage Short-term and long-term disability coverage Company-paid life insurance, plus voluntary life insurance options Voluntary accident and critical illness coverage 401(k) with employer match Paid time off, and holiday pay Employee discount program Safe Driver award program About Brame Specialty Company Brame Specialty Company has served customers across the Carolinas and Virginia since 1924. As a family-owned company, we are proud to offer long-term stability, a strong team culture, and a customer-first approach to helping organizations improve the appearance, health, and efficiency of their facilities. We provide a wide range of products, including food service supplies, school and workplace furniture, industrial packaging, janitorial and facility solutions, office and school supplies, and technology products. Our team partners with leading vendors to deliver dependable solutions that customers can count on every day. Compensation details: 21-22 Hourly Wage PI254ee35437fe-8434
07/23/2026
Full time
Technician Starting Pay: $21.00 - $22.00 per hour, based on experience Technician Schedule: Monday through Friday, weekends off Ready to put your technical skills to work with a company that values service, problem-solving, and doing the job right? Brame is looking for a Machine Repair and Commercial Laundry Technician to join our growing service team and help customers keep their facilities running clean, safe, and efficient. In this hands-on, field-based role, you will diagnose, repair, maintain, and support commercial floor care machines and commercial laundry chemical dispensing systems at customer locations. You will work independently, solve real problems in the field, and represent Brame through reliable service, clear communication, and a customer-first attitude. This is a great opportunity for someone who enjoys mechanical and electro-mechanical troubleshooting, takes pride in quality work, and wants the independence of a field service role with the support of a respected, family-owned company. A company service van will be provided, and you will have the flexibility to start your day from home. What You'll Do as a Technician Troubleshoot, diagnose, repair, and maintain commercial floor care machines and related equipment in the field. Service, troubleshoot, and repair commercial laundry chemical dispensing systems, pumps, controllers, tubing, and related components. Install replacement parts and complete repairs safely, accurately, and efficiently. Use schematic drawings, service information, and technical resources to identify problems and determine the best repair solution. Communicate clearly with customers regarding equipment status, repair recommendations, completed work, and next steps. Accurately document service activity, including labor, parts, materials, mileage, fuel purchases, and daily work completed. Update schedules, service activity, and daily reports in the company service management system. Maintain tools, parts, service equipment, and the company service van in clean, safe, organized, and working condition. Stock the service van with necessary tools, parts, and equipment to support timely repairs and reduce return trips. Load, unload, transport, and handle tools, equipment, motors, parts, and materials as needed. Partner with the service manager, parts team, vendors, and teammates to keep repairs moving and customers supported. Follow all safety procedures, wear required PPE, and help maintain a safe and clean work environment. Participate in quality improvement efforts and contribute ideas that help improve service, efficiency, and the customer experience. Perform required administrative tasks, reports, and correspondence. Perform other duties as assigned by the manager. What We're Looking For Valid driver's license with REAL ID and a safe driving record. Prior experience servicing and repairing commercial floor care equipment, commercial laundry equipment, chemical dispensing pumps, or related electro-mechanical systems is preferred. Strong electro mechanical aptitude and hands on troubleshooting ability are required. Background in mechanical, electrical, plumbing, equipment repair, machine repair, or electro mechanical maintenance is strongly preferred. Ability to read or work from schematic drawings and service information is a plus. Comfortable using basic computer tools, Microsoft Outlook, and service management software. Able to work independently, manage your day, stay organized, and adapt when priorities change. Strong written and verbal communication skills with a professional, customer first mindset. Strong problem solving skills and the ability to prioritize, troubleshoot, and follow through. Detail oriented, dependable, proactive, and self directed. Able to work effectively with limited supervision and as part of a team. Committed to quality, safety, professionalism, and excellent customer service. Steel-toe or composite toe shoes are required. Able to pass company background screening, motor vehicle report review, and drug testing requirements. Physical Requirements for a Technician Lift and carry up to 50 pounds without assistance. Carry tools, motors, equipment, parts, and related materials into customer facilities, including extended walking distances and stair use when needed. Stoop, bend, kneel, climb, crawl, and work around or under machines, tables, pipes, buckets, and equipment as needed. Drive for extended periods as part of daily travel to customer locations. Wear required personal protective equipment when needed. Work overtime as needed, including occasional overnight travel. Benefits Medical, dental, and vision coverage Short-term and long-term disability coverage Company-paid life insurance, plus voluntary life insurance options Voluntary accident and critical illness coverage 401(k) with employer match Paid time off, and holiday pay Employee discount program Safe Driver award program About Brame Specialty Company Brame Specialty Company has served customers across the Carolinas and Virginia since 1924. As a family-owned company, we are proud to offer long-term stability, a strong team culture, and a customer-first approach to helping organizations improve the appearance, health, and efficiency of their facilities. We provide a wide range of products, including food service supplies, school and workplace furniture, industrial packaging, janitorial and facility solutions, office and school supplies, and technology products. Our team partners with leading vendors to deliver dependable solutions that customers can count on every day. Compensation details: 21-22 Hourly Wage PI254ee35437fe-8434
Technician Starting Pay: $21.00 - $22.00 per hour, based on experience Technician Schedule: Monday through Friday, weekends off Ready to put your technical skills to work with a company that values service, problem-solving, and doing the job right? Brame is looking for a Machine Repair and Commercial Laundry Technician to join our growing service team and help customers keep their facilities running clean, safe, and efficient. In this hands-on, field-based role, you will diagnose, repair, maintain, and support commercial floor care machines and commercial laundry chemical dispensing systems at customer locations. You will work independently, solve real problems in the field, and represent Brame through reliable service, clear communication, and a customer-first attitude. This is a great opportunity for someone who enjoys mechanical and electro-mechanical troubleshooting, takes pride in quality work, and wants the independence of a field service role with the support of a respected, family-owned company. A company service van will be provided, and you will have the flexibility to start your day from home. What You'll Do as a Technician Troubleshoot, diagnose, repair, and maintain commercial floor care machines and related equipment in the field. Service, troubleshoot, and repair commercial laundry chemical dispensing systems, pumps, controllers, tubing, and related components. Install replacement parts and complete repairs safely, accurately, and efficiently. Use schematic drawings, service information, and technical resources to identify problems and determine the best repair solution. Communicate clearly with customers regarding equipment status, repair recommendations, completed work, and next steps. Accurately document service activity, including labor, parts, materials, mileage, fuel purchases, and daily work completed. Update schedules, service activity, and daily reports in the company service management system. Maintain tools, parts, service equipment, and the company service van in clean, safe, organized, and working condition. Stock the service van with necessary tools, parts, and equipment to support timely repairs and reduce return trips. Load, unload, transport, and handle tools, equipment, motors, parts, and materials as needed. Partner with the service manager, parts team, vendors, and teammates to keep repairs moving and customers supported. Follow all safety procedures, wear required PPE, and help maintain a safe and clean work environment. Participate in quality improvement efforts and contribute ideas that help improve service, efficiency, and the customer experience. Perform required administrative tasks, reports, and correspondence. Perform other duties as assigned by the manager. What We're Looking For Valid driver's license with REAL ID and a safe driving record. Prior experience servicing and repairing commercial floor care equipment, commercial laundry equipment, chemical dispensing pumps, or related electro-mechanical systems is preferred. Strong electro mechanical aptitude and hands on troubleshooting ability are required. Background in mechanical, electrical, plumbing, equipment repair, machine repair, or electro mechanical maintenance is strongly preferred. Ability to read or work from schematic drawings and service information is a plus. Comfortable using basic computer tools, Microsoft Outlook, and service management software. Able to work independently, manage your day, stay organized, and adapt when priorities change. Strong written and verbal communication skills with a professional, customer first mindset. Strong problem solving skills and the ability to prioritize, troubleshoot, and follow through. Detail oriented, dependable, proactive, and self directed. Able to work effectively with limited supervision and as part of a team. Committed to quality, safety, professionalism, and excellent customer service. Steel-toe or composite toe shoes are required. Able to pass company background screening, motor vehicle report review, and drug testing requirements. Physical Requirements for a Technician Lift and carry up to 50 pounds without assistance. Carry tools, motors, equipment, parts, and related materials into customer facilities, including extended walking distances and stair use when needed. Stoop, bend, kneel, climb, crawl, and work around or under machines, tables, pipes, buckets, and equipment as needed. Drive for extended periods as part of daily travel to customer locations. Wear required personal protective equipment when needed. Work overtime as needed, including occasional overnight travel. Benefits Medical, dental, and vision coverage Short-term and long-term disability coverage Company-paid life insurance, plus voluntary life insurance options Voluntary accident and critical illness coverage 401(k) with employer match Paid time off, and holiday pay Employee discount program Safe Driver award program About Brame Specialty Company Brame Specialty Company has served customers across the Carolinas and Virginia since 1924. As a family-owned company, we are proud to offer long-term stability, a strong team culture, and a customer-first approach to helping organizations improve the appearance, health, and efficiency of their facilities. We provide a wide range of products, including food service supplies, school and workplace furniture, industrial packaging, janitorial and facility solutions, office and school supplies, and technology products. Our team partners with leading vendors to deliver dependable solutions that customers can count on every day. Compensation details: 21-22 Hourly Wage PIcc5ed704631e-8430
07/23/2026
Full time
Technician Starting Pay: $21.00 - $22.00 per hour, based on experience Technician Schedule: Monday through Friday, weekends off Ready to put your technical skills to work with a company that values service, problem-solving, and doing the job right? Brame is looking for a Machine Repair and Commercial Laundry Technician to join our growing service team and help customers keep their facilities running clean, safe, and efficient. In this hands-on, field-based role, you will diagnose, repair, maintain, and support commercial floor care machines and commercial laundry chemical dispensing systems at customer locations. You will work independently, solve real problems in the field, and represent Brame through reliable service, clear communication, and a customer-first attitude. This is a great opportunity for someone who enjoys mechanical and electro-mechanical troubleshooting, takes pride in quality work, and wants the independence of a field service role with the support of a respected, family-owned company. A company service van will be provided, and you will have the flexibility to start your day from home. What You'll Do as a Technician Troubleshoot, diagnose, repair, and maintain commercial floor care machines and related equipment in the field. Service, troubleshoot, and repair commercial laundry chemical dispensing systems, pumps, controllers, tubing, and related components. Install replacement parts and complete repairs safely, accurately, and efficiently. Use schematic drawings, service information, and technical resources to identify problems and determine the best repair solution. Communicate clearly with customers regarding equipment status, repair recommendations, completed work, and next steps. Accurately document service activity, including labor, parts, materials, mileage, fuel purchases, and daily work completed. Update schedules, service activity, and daily reports in the company service management system. Maintain tools, parts, service equipment, and the company service van in clean, safe, organized, and working condition. Stock the service van with necessary tools, parts, and equipment to support timely repairs and reduce return trips. Load, unload, transport, and handle tools, equipment, motors, parts, and materials as needed. Partner with the service manager, parts team, vendors, and teammates to keep repairs moving and customers supported. Follow all safety procedures, wear required PPE, and help maintain a safe and clean work environment. Participate in quality improvement efforts and contribute ideas that help improve service, efficiency, and the customer experience. Perform required administrative tasks, reports, and correspondence. Perform other duties as assigned by the manager. What We're Looking For Valid driver's license with REAL ID and a safe driving record. Prior experience servicing and repairing commercial floor care equipment, commercial laundry equipment, chemical dispensing pumps, or related electro-mechanical systems is preferred. Strong electro mechanical aptitude and hands on troubleshooting ability are required. Background in mechanical, electrical, plumbing, equipment repair, machine repair, or electro mechanical maintenance is strongly preferred. Ability to read or work from schematic drawings and service information is a plus. Comfortable using basic computer tools, Microsoft Outlook, and service management software. Able to work independently, manage your day, stay organized, and adapt when priorities change. Strong written and verbal communication skills with a professional, customer first mindset. Strong problem solving skills and the ability to prioritize, troubleshoot, and follow through. Detail oriented, dependable, proactive, and self directed. Able to work effectively with limited supervision and as part of a team. Committed to quality, safety, professionalism, and excellent customer service. Steel-toe or composite toe shoes are required. Able to pass company background screening, motor vehicle report review, and drug testing requirements. Physical Requirements for a Technician Lift and carry up to 50 pounds without assistance. Carry tools, motors, equipment, parts, and related materials into customer facilities, including extended walking distances and stair use when needed. Stoop, bend, kneel, climb, crawl, and work around or under machines, tables, pipes, buckets, and equipment as needed. Drive for extended periods as part of daily travel to customer locations. Wear required personal protective equipment when needed. Work overtime as needed, including occasional overnight travel. Benefits Medical, dental, and vision coverage Short-term and long-term disability coverage Company-paid life insurance, plus voluntary life insurance options Voluntary accident and critical illness coverage 401(k) with employer match Paid time off, and holiday pay Employee discount program Safe Driver award program About Brame Specialty Company Brame Specialty Company has served customers across the Carolinas and Virginia since 1924. As a family-owned company, we are proud to offer long-term stability, a strong team culture, and a customer-first approach to helping organizations improve the appearance, health, and efficiency of their facilities. We provide a wide range of products, including food service supplies, school and workplace furniture, industrial packaging, janitorial and facility solutions, office and school supplies, and technology products. Our team partners with leading vendors to deliver dependable solutions that customers can count on every day. Compensation details: 21-22 Hourly Wage PIcc5ed704631e-8430
REFERRAL BONUS : $500 Pay: $25 - $30 per hour. Overtime is available . Shift Available: Monday - Friday 11:00 AM - 7:30 PM, Occasional weekend work Shift Differential: Yes,$2.00/HR Annual Tool Allowance: Yes Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/23/2026
Full time
REFERRAL BONUS : $500 Pay: $25 - $30 per hour. Overtime is available . Shift Available: Monday - Friday 11:00 AM - 7:30 PM, Occasional weekend work Shift Differential: Yes,$2.00/HR Annual Tool Allowance: Yes Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Job Description Job Description Position Title: Construction Service Technician Location: Charlotte, NC Job Category: Service Solutions Pay Range: N/A Application Instructions Apply today! Position Description About Us At Barringer, we build more than beautiful spaces - we build lasting relationships and an unforgettable client experience we call The Barringer Way. As a Carolinas-based, 100% employee-owned commercial general contractor, every team member shares in our success through our ESOP, and we've been named the Best Employer in North Carolina by Business NC Magazine two years running (2024 and 2025). We're hiring a Service Technician to join Barringer Service Solutions, our post-construction service arm. If you take pride in your craft, love the variety of tackling different challenges each day, and thrive on turning client headaches into quick wins, this role is built for you. We take care of our team the way we take care of our clients. You'll enjoy 100% employer-paid premiums for dental, vision, short-term disability, and life insurance; a 401(k) with company match; flexible PTO after your first year; tuition reimbursement; a wellness program; pet insurance; and annual donations to your favorite charity. Apply today! What You'll Do As a Service Technician, you're the go-to expert our clients count on when something needs fixing, refreshing, or finishing right. You'll partner closely with our Service Team to deliver the kind of responsive, mint-on-the-pillow experience that keeps clients calling Barringer long after the original project wraps. Tackle a wide variety of service work including carpentry, metal and wood framing, cabinetry, and general maintenance Complete drywall, paint, wallcovering, and water-damage repairs with a finish-quality eye Install doors, frames, hardware, ceiling grid and tile, fixtures, furniture, and partitions Handle space refreshes, picture hanging, and the countless small touches that elevate a space Perform routine inspections and preventative maintenance to keep client facilities running smoothly Coordinate subcontractors on-site and keep the Service Team looped in on progress, issues, and opportunities Communicate directly with clients in a professional, solutions-focused way that reinforces trust Position Requirements What You Bring A craftsman's mindset and genuine pride in quality work Strong attention to detail, with the scheduling discipline to juggle multiple service calls Confident, professional communication skills - you're comfortable interacting with clients, teammates, and subcontractors The ability to interpret written instructions, plans, and schedules without hand-holding A proactive, problem-solving attitude that fits our Creative Problem Solvers culture Experience 3+ years of construction or building maintenance experience Technical training in HVAC, plumbing, electrical, or carpentry is a plus Skills & Tools Safe, confident operation of hand and power tools Valid NC driver's license and comfort driving a company truck English fluency required; additional languages welcome Physical Demands Work performed primarily on active service job sites, on your feet throughout the day Regularly climb ladders and navigate varied site conditions Lift up to 50 lbs independently, more with a partner Work Environment Field-based role across active client sites - indoors and outdoors, with changing temperatures, heights, machinery, and the occasional dusty day Standard weekday schedule with occasional after-hours or weekend calls to meet client needs Equal Opportunity Employer The policy of Barringer Construction is to approach recruiting, hiring, promotion, compensation and professional development practices without regard to race, religion, color, national origin, sex, age, creed, handicap, veteran status, sexual orientation or any other characteristic protected by law. We are fully committed to the principles of equal employment. All employees are expected to participate in helping the Company maintain a climate that is free of workplace harassment and provides equal opportunity for all. All forms of harassment by employees, vendors, visitors, customers, and clients are strictly prohibited and will not be tolerated. This includes sexual harassment and other forms of workplace harassment based upon an individual's sex, gender, race, religion, color, national origin, physical or mental disability, genetic information, marital status, age, sexual orientation, gender identity, AIDS/HIV status, military service, veteran status, or any other status protected by federal, state, or local laws. PI33133d2a5a47-9979
07/22/2026
Full time
Job Description Job Description Position Title: Construction Service Technician Location: Charlotte, NC Job Category: Service Solutions Pay Range: N/A Application Instructions Apply today! Position Description About Us At Barringer, we build more than beautiful spaces - we build lasting relationships and an unforgettable client experience we call The Barringer Way. As a Carolinas-based, 100% employee-owned commercial general contractor, every team member shares in our success through our ESOP, and we've been named the Best Employer in North Carolina by Business NC Magazine two years running (2024 and 2025). We're hiring a Service Technician to join Barringer Service Solutions, our post-construction service arm. If you take pride in your craft, love the variety of tackling different challenges each day, and thrive on turning client headaches into quick wins, this role is built for you. We take care of our team the way we take care of our clients. You'll enjoy 100% employer-paid premiums for dental, vision, short-term disability, and life insurance; a 401(k) with company match; flexible PTO after your first year; tuition reimbursement; a wellness program; pet insurance; and annual donations to your favorite charity. Apply today! What You'll Do As a Service Technician, you're the go-to expert our clients count on when something needs fixing, refreshing, or finishing right. You'll partner closely with our Service Team to deliver the kind of responsive, mint-on-the-pillow experience that keeps clients calling Barringer long after the original project wraps. Tackle a wide variety of service work including carpentry, metal and wood framing, cabinetry, and general maintenance Complete drywall, paint, wallcovering, and water-damage repairs with a finish-quality eye Install doors, frames, hardware, ceiling grid and tile, fixtures, furniture, and partitions Handle space refreshes, picture hanging, and the countless small touches that elevate a space Perform routine inspections and preventative maintenance to keep client facilities running smoothly Coordinate subcontractors on-site and keep the Service Team looped in on progress, issues, and opportunities Communicate directly with clients in a professional, solutions-focused way that reinforces trust Position Requirements What You Bring A craftsman's mindset and genuine pride in quality work Strong attention to detail, with the scheduling discipline to juggle multiple service calls Confident, professional communication skills - you're comfortable interacting with clients, teammates, and subcontractors The ability to interpret written instructions, plans, and schedules without hand-holding A proactive, problem-solving attitude that fits our Creative Problem Solvers culture Experience 3+ years of construction or building maintenance experience Technical training in HVAC, plumbing, electrical, or carpentry is a plus Skills & Tools Safe, confident operation of hand and power tools Valid NC driver's license and comfort driving a company truck English fluency required; additional languages welcome Physical Demands Work performed primarily on active service job sites, on your feet throughout the day Regularly climb ladders and navigate varied site conditions Lift up to 50 lbs independently, more with a partner Work Environment Field-based role across active client sites - indoors and outdoors, with changing temperatures, heights, machinery, and the occasional dusty day Standard weekday schedule with occasional after-hours or weekend calls to meet client needs Equal Opportunity Employer The policy of Barringer Construction is to approach recruiting, hiring, promotion, compensation and professional development practices without regard to race, religion, color, national origin, sex, age, creed, handicap, veteran status, sexual orientation or any other characteristic protected by law. We are fully committed to the principles of equal employment. All employees are expected to participate in helping the Company maintain a climate that is free of workplace harassment and provides equal opportunity for all. All forms of harassment by employees, vendors, visitors, customers, and clients are strictly prohibited and will not be tolerated. This includes sexual harassment and other forms of workplace harassment based upon an individual's sex, gender, race, religion, color, national origin, physical or mental disability, genetic information, marital status, age, sexual orientation, gender identity, AIDS/HIV status, military service, veteran status, or any other status protected by federal, state, or local laws. PI33133d2a5a47-9979
Pay: $22.93-$28.65 per hour, depending on certifications and experience Shift Available: Monday-Friday, 8:00 AM - 4:30 PM Annual Tool Allowance: Available Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/22/2026
Full time
Pay: $22.93-$28.65 per hour, depending on certifications and experience Shift Available: Monday-Friday, 8:00 AM - 4:30 PM Annual Tool Allowance: Available Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
SIGN ON BONUS - UPTO $7,000 Pay: $30 - $40per hour (based on experience) Shift Availability: 4/10hr shifts Tuesday - Friday Shift Differential: Yes, $3 per hour $700 annual tool allowance Outstanding benefits package: Full time career opportunity with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/22/2026
Full time
SIGN ON BONUS - UPTO $7,000 Pay: $30 - $40per hour (based on experience) Shift Availability: 4/10hr shifts Tuesday - Friday Shift Differential: Yes, $3 per hour $700 annual tool allowance Outstanding benefits package: Full time career opportunity with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
SIGN ON BONUS : UPTO $7,000 Pay Rate: $32.00 - $40.00 per hour, Overtime available . Shift Available: 10:00 AM - 6:00 PM . Annual Tool Allowance: Yes, a $700 annual tool allowance is provided. Additional Benefits: Uniforms are provided, Full benefits, Free boots voucher yearly. Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/22/2026
Full time
SIGN ON BONUS : UPTO $7,000 Pay Rate: $32.00 - $40.00 per hour, Overtime available . Shift Available: 10:00 AM - 6:00 PM . Annual Tool Allowance: Yes, a $700 annual tool allowance is provided. Additional Benefits: Uniforms are provided, Full benefits, Free boots voucher yearly. Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Description: NALS Apartment Homes believes that an apartment is not simply a place to live, but a place to call home. We embrace opportunities for personal and professional growth, and encourage our employees to share their unique skills, local knowledge, and professional expertise. Our team is the single most important ingredient to our success, and we seek to foster a work environment as welcoming as our apartment communities. We are looking to add a skilled Maintenance Technician to our team at Mariner's Glen Apartment Homes. Benefits and Perks Starting compensation: $22 - $23 an hour $150 per week on-call coverage pay Plus, $35 per call-out performed 30% rent discount 10+ days of paid time off in your first year of employment Comprehensive benefits package including medical, dental, vision, life insurance and disability insurance 401(k) with generous employer match Employee assistance program Wellness program Employee referral program Maintenance training & certification programs Along with tons of other great benefits and amazing perks! What you will do Ensure all service requests, callbacks, and/or work orders are performed properly and promptly Complete assigned maintenance make-ready sheets Turn vacant apartments Maintain pools and spas, including chemical testing and furniture cleanliness Maintain property grounds, workplace, and maintenance shop Respond to after-hour calls and emergencies Perform additional duties, responsibilities, or projects as assigned Requirements: Minimum 1 year of multifamily maintenance experience Previous painting experience preferred Skills relating to all building systems Knowledge and understanding of the unit turn process Knowledge in plumbing and pool and spa Familiar with appliance repair, electrical repairs, and basic roofing repairs Valid drivers' license and current auto insurance may be required 40-hour work week, including on-call rotation; weekend availability required while on-call Working inside and outside in all types of weather Medium to heavy work, requiring prolonged or repeated standing, walking, climbing, stooping, kneeling, crouching, and lifting to a maximum of 100 lbs., with frequent lifting and carrying of up to 50 lbs. Good hand and eye coordination are essential, including the ability to ascend and descend ladders and stairs, and perform repetitive/continuous tasks according to set procedures and sequences This career position is a great opportunity for someone who is seeking longevity and growth. To learn more about our communities and team culture, check us out on Facebook and Instagram. Compensation details: 22-23 Hourly Wage PI9a5cb3cd74b3-6660
07/21/2026
Full time
Description: NALS Apartment Homes believes that an apartment is not simply a place to live, but a place to call home. We embrace opportunities for personal and professional growth, and encourage our employees to share their unique skills, local knowledge, and professional expertise. Our team is the single most important ingredient to our success, and we seek to foster a work environment as welcoming as our apartment communities. We are looking to add a skilled Maintenance Technician to our team at Mariner's Glen Apartment Homes. Benefits and Perks Starting compensation: $22 - $23 an hour $150 per week on-call coverage pay Plus, $35 per call-out performed 30% rent discount 10+ days of paid time off in your first year of employment Comprehensive benefits package including medical, dental, vision, life insurance and disability insurance 401(k) with generous employer match Employee assistance program Wellness program Employee referral program Maintenance training & certification programs Along with tons of other great benefits and amazing perks! What you will do Ensure all service requests, callbacks, and/or work orders are performed properly and promptly Complete assigned maintenance make-ready sheets Turn vacant apartments Maintain pools and spas, including chemical testing and furniture cleanliness Maintain property grounds, workplace, and maintenance shop Respond to after-hour calls and emergencies Perform additional duties, responsibilities, or projects as assigned Requirements: Minimum 1 year of multifamily maintenance experience Previous painting experience preferred Skills relating to all building systems Knowledge and understanding of the unit turn process Knowledge in plumbing and pool and spa Familiar with appliance repair, electrical repairs, and basic roofing repairs Valid drivers' license and current auto insurance may be required 40-hour work week, including on-call rotation; weekend availability required while on-call Working inside and outside in all types of weather Medium to heavy work, requiring prolonged or repeated standing, walking, climbing, stooping, kneeling, crouching, and lifting to a maximum of 100 lbs., with frequent lifting and carrying of up to 50 lbs. Good hand and eye coordination are essential, including the ability to ascend and descend ladders and stairs, and perform repetitive/continuous tasks according to set procedures and sequences This career position is a great opportunity for someone who is seeking longevity and growth. To learn more about our communities and team culture, check us out on Facebook and Instagram. Compensation details: 22-23 Hourly Wage PI9a5cb3cd74b3-6660
Facilities Technician Help Others, Make a Difference, Save a Life. Do you want to make a difference in people's lives every day? Or help people navigate the tough spots in their life? And do it all while working where your hard work is appreciated? You have a lot of choices in where you work make the decision to work where you are valued! Join the McNabb Center Team as the Facilities Technician today! The Facilities Technician JOB SUMMARY: This is a full time 40 hour per week position; it will require some overtime and will be required for on-call emergency. Performs general maintenance tasks. Preventive maintenance on HVAC systems, logging and tracking helpdesk requests, meeting with vendors. Replaces light tubes/bulbs, fixtures and electrical components. Moving of furniture. This job description is not intended to be all-inclusive; and employee will also perform other reasonably related job responsibilities as assigned by immediate supervisor and other management as required. This organization reserves the right to revise or change job duties as the need arises. Moreover, management reserves the right to change job descriptions, job duties, or working schedules based upon their duty to accommodate individuals with disabilities. This job description does not constitute a written or implied contract of employment. JOB DUTIES/RESPONSIBILITIES This job description is not intended to be all-inclusive; and employee will also perform other reasonably related job responsibilities as assigned by immediate supervisor and other management as required. This organization reserves the right to revise or change job duties as the need arises. Moreover, management reserves the right to change job descriptions, job duties, or working schedules based on their duty to accommodate individuals with disabilities. This job description does not constitute a written or implied contract of employment. Job Standards Assist with monthly safety inspections for buildings, opens tickets for all safety issues. Monitors and reports any facility items needing addressed, ceiling tiles replaced, lights out, trip hazards, or pest issues. Ensures all annual inspections for the buildings have been completed in a timely manner. Knowledge of all CARF and Licensure requirements for facilities. Minor construction, demolition, and repair of walls when needed. Knowledge of vehicle policies and safety requirements. Assists with oil changes for facilities with center vehicles. Assist with fire drills Participates with on call as needed. Ensures all monthly PM's are completed timely. Avoids real or perceived conflicts of interest Reports all violations of policy or code of ethics. Works all tickets assigned timely and with accurately. Assists with moves, putting together furniture, and new building startups and shut downs. Ensure that all HRMC Emergency calls are responded to. Required to contact supervisor with an update on emergency calls before leaving job site property. Required to answer work phone or respond back within 30 minutes. Ensure that vehicle assigned to technician is maintained. Required to maintain a clean and organized vehicle. The technician is responsible for any and all traffic violations while operating a HRMC vehicle. Observe all safety practices from wearing PPE to being aware of you and your teams safety. Conduct all work in a courteous and professional manner. Leave all work areas clean of tools and debris, to insure the safety of all clients and staff. COMPENSATION: Starting salary for this position is approximately $19.54 /hr based on relevant experience and education. QUALIFICATIONS - Facilities Technician Experience: A minimum of three years experience is required in the field of building maintenance and/or construction. Some knowledge of computers and computer software. Must be able to work in an environment that includes adults and children. Applicants must be able to work independently, and with minimal supervision, and possess excellent communication and customer service skills. Must be able to drive a center vehicle. Education : High school diploma or GED. Three years' experience may be considered in lieu of education. Knowledge of basic electrical, carpentry, plumbing, HVAC systems, construction materials and general construction techniques. Physical: Normal facility operations environment. Must have a valid Tennessee driver's license. Normal/corrected eyesight. Hearing within normal range. Must be able to lift a minimum of 40 pounds. Must be able to climb ladder. Location: Knox County, Tennessee Apply today to work where we care about you as an employee and where your hard work makes a difference! Helen Ross McNabb Center is an Equal Opportunity Employer. The Center provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment. Helen Ross McNabb Center conducts background checks, driver's license record, degree verification, and drug screens at hire. Employment is contingent upon clean drug screen, background check, and driving record. Additionally, certain programs are subject to TB Screening and/or testing. Bilingual applicants are encouraged to apply. PI0d193d6878c6-1026
07/21/2026
Full time
Facilities Technician Help Others, Make a Difference, Save a Life. Do you want to make a difference in people's lives every day? Or help people navigate the tough spots in their life? And do it all while working where your hard work is appreciated? You have a lot of choices in where you work make the decision to work where you are valued! Join the McNabb Center Team as the Facilities Technician today! The Facilities Technician JOB SUMMARY: This is a full time 40 hour per week position; it will require some overtime and will be required for on-call emergency. Performs general maintenance tasks. Preventive maintenance on HVAC systems, logging and tracking helpdesk requests, meeting with vendors. Replaces light tubes/bulbs, fixtures and electrical components. Moving of furniture. This job description is not intended to be all-inclusive; and employee will also perform other reasonably related job responsibilities as assigned by immediate supervisor and other management as required. This organization reserves the right to revise or change job duties as the need arises. Moreover, management reserves the right to change job descriptions, job duties, or working schedules based upon their duty to accommodate individuals with disabilities. This job description does not constitute a written or implied contract of employment. JOB DUTIES/RESPONSIBILITIES This job description is not intended to be all-inclusive; and employee will also perform other reasonably related job responsibilities as assigned by immediate supervisor and other management as required. This organization reserves the right to revise or change job duties as the need arises. Moreover, management reserves the right to change job descriptions, job duties, or working schedules based on their duty to accommodate individuals with disabilities. This job description does not constitute a written or implied contract of employment. Job Standards Assist with monthly safety inspections for buildings, opens tickets for all safety issues. Monitors and reports any facility items needing addressed, ceiling tiles replaced, lights out, trip hazards, or pest issues. Ensures all annual inspections for the buildings have been completed in a timely manner. Knowledge of all CARF and Licensure requirements for facilities. Minor construction, demolition, and repair of walls when needed. Knowledge of vehicle policies and safety requirements. Assists with oil changes for facilities with center vehicles. Assist with fire drills Participates with on call as needed. Ensures all monthly PM's are completed timely. Avoids real or perceived conflicts of interest Reports all violations of policy or code of ethics. Works all tickets assigned timely and with accurately. Assists with moves, putting together furniture, and new building startups and shut downs. Ensure that all HRMC Emergency calls are responded to. Required to contact supervisor with an update on emergency calls before leaving job site property. Required to answer work phone or respond back within 30 minutes. Ensure that vehicle assigned to technician is maintained. Required to maintain a clean and organized vehicle. The technician is responsible for any and all traffic violations while operating a HRMC vehicle. Observe all safety practices from wearing PPE to being aware of you and your teams safety. Conduct all work in a courteous and professional manner. Leave all work areas clean of tools and debris, to insure the safety of all clients and staff. COMPENSATION: Starting salary for this position is approximately $19.54 /hr based on relevant experience and education. QUALIFICATIONS - Facilities Technician Experience: A minimum of three years experience is required in the field of building maintenance and/or construction. Some knowledge of computers and computer software. Must be able to work in an environment that includes adults and children. Applicants must be able to work independently, and with minimal supervision, and possess excellent communication and customer service skills. Must be able to drive a center vehicle. Education : High school diploma or GED. Three years' experience may be considered in lieu of education. Knowledge of basic electrical, carpentry, plumbing, HVAC systems, construction materials and general construction techniques. Physical: Normal facility operations environment. Must have a valid Tennessee driver's license. Normal/corrected eyesight. Hearing within normal range. Must be able to lift a minimum of 40 pounds. Must be able to climb ladder. Location: Knox County, Tennessee Apply today to work where we care about you as an employee and where your hard work makes a difference! Helen Ross McNabb Center is an Equal Opportunity Employer. The Center provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment. Helen Ross McNabb Center conducts background checks, driver's license record, degree verification, and drug screens at hire. Employment is contingent upon clean drug screen, background check, and driving record. Additionally, certain programs are subject to TB Screening and/or testing. Bilingual applicants are encouraged to apply. PI0d193d6878c6-1026
Hamilton County Facilities Technician Help Others, Make a Difference, Save a Life. Do you want to make a difference in people's lives every day? Or help people navigate the tough spots in their life? And do it all while working where your hard work is appreciated? You have a lot of choices in where you work make the decision to work where you are valued! Join the McNabb Center Team as the Hamilton Co. Facilities Technician today! The Facilities Technician JOB PURPOSE/SUMMARY Summary of position : Performs general maintenance tasks, preventive maintenance on HVAC systems, logs and tracks helpdesk requests, and meets with vendors. Replaces light tubes/bulbs, fixtures and electrical components. Moves Furniture. TYPICAL WORKING CONDITIONS/ENVIRONMENT Position will be in a Facility Operations Environment. JOB DUTIES/RESPONSIBILITIES This job description is not intended to be all-inclusive; and employee will also perform other reasonably related job responsibilities as assigned by immediate supervisor and other management as required. This organization reserves the right to revise or change job duties as the need arises. Moreover, management reserves the right to change job descriptions, job duties, or working schedules based on their duty to accommodate individuals with disabilities. This job description does not constitute a written or implied contract of employment. Assists with monthly safety inspections for buildings, opens tickets for all safety issues. Monitors and reports any facility items needing addressed, ceiling tiles replaced, lights out, trip hazards, or pest issues. Ensures all annual inspections for the buildings have been completed in a timely manner. Knowledge of all CARF and Licensure requirements for facilities. Minor construction, demolition, and repair of walls when needed. Knowledge of vehicle policies and safety requirements. Assists with oil changes for facilities with center vehicles. Assists with fire drills Participates with on call as needed. Ensures all monthly PM's are completed timely. Avoids real or perceived conflicts of interest Reports all violations of policy or code of ethics. Works all tickets assigned timely and with accuracy. Assists with moves, putting together furniture, and new building startups and shutdowns. Ensures that all HRMC Emergency calls are responded to. Required to contact supervisor with an update on emergency calls before leaving job site property. Required to answer work phone or respond back within 30 minutes. Ensures that vehicle assigned to technician is maintained. Required to maintain a clean and organized vehicle. The technician is responsible for any and all traffic violations while operating a HRMC vehicle. Observes all safety practices from wearing PPE to being aware of you and your team's safety. Conducts all work in a courteous and professional manner. Leaves all work areas clean of tools and debris, to ensure the safety of all clients and staff. COMPENSATION: Starting salary for this position is approximately $20.31/hour based on relevant experience and education. Schedule: This is a full-time 40 hour per week position; it will require some overtime and will be required for on-call emergency. Travel : Must have valid TN Driver's License. Must be able to drive a Center Vehicle. QUALIFICATIONS - Hamilton Co. Facilities Technician Experience / Knowledge: A minimum of three years' experience is required in the field of building maintenance and/or construction. Some knowledge of computers and computer software. Must be able to work in an environment that includes adults and children. Applicants must be able to work independently, and with minimal supervision, and possess excellent communication and customer service skills. Must be able to drive a center vehicle. Education / License : High school diploma or GED. Three years' experience may be considered in lieu of education. Knowledge of basic electrical, carpentry, plumbing, HVAC systems, construction materials and general construction techniques. Physical/Emotional/Social - Skills/Abilities: Exposure to biological hazards. Hearing of normal and soft tones. Close eye work. Lifting up to 50 lbs. Pushing/pulling up to 150 lbs. Must be able to climb ladder. Frequent sitting, standing, walking, bending, stooping, and reaching. Valid Driver's License Location: Hamilton County, Tennessee Apply today to work where we care about you as an employee and where your hard work makes a difference! Helen Ross McNabb Center is an Equal Opportunity Employer. The Center provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment. Helen Ross McNabb Center conducts background checks, driver's license record, degree verification, and drug screens at hire. Employment is contingent upon clean drug screen, background check, and driving record. Additionally, certain programs are subject to TB Screening and/or testing. Bilingual applicants are encouraged to apply. Compensation details: 20.31-20.31 Hourly Wage PI76afbd48ebe6-1031
07/21/2026
Full time
Hamilton County Facilities Technician Help Others, Make a Difference, Save a Life. Do you want to make a difference in people's lives every day? Or help people navigate the tough spots in their life? And do it all while working where your hard work is appreciated? You have a lot of choices in where you work make the decision to work where you are valued! Join the McNabb Center Team as the Hamilton Co. Facilities Technician today! The Facilities Technician JOB PURPOSE/SUMMARY Summary of position : Performs general maintenance tasks, preventive maintenance on HVAC systems, logs and tracks helpdesk requests, and meets with vendors. Replaces light tubes/bulbs, fixtures and electrical components. Moves Furniture. TYPICAL WORKING CONDITIONS/ENVIRONMENT Position will be in a Facility Operations Environment. JOB DUTIES/RESPONSIBILITIES This job description is not intended to be all-inclusive; and employee will also perform other reasonably related job responsibilities as assigned by immediate supervisor and other management as required. This organization reserves the right to revise or change job duties as the need arises. Moreover, management reserves the right to change job descriptions, job duties, or working schedules based on their duty to accommodate individuals with disabilities. This job description does not constitute a written or implied contract of employment. Assists with monthly safety inspections for buildings, opens tickets for all safety issues. Monitors and reports any facility items needing addressed, ceiling tiles replaced, lights out, trip hazards, or pest issues. Ensures all annual inspections for the buildings have been completed in a timely manner. Knowledge of all CARF and Licensure requirements for facilities. Minor construction, demolition, and repair of walls when needed. Knowledge of vehicle policies and safety requirements. Assists with oil changes for facilities with center vehicles. Assists with fire drills Participates with on call as needed. Ensures all monthly PM's are completed timely. Avoids real or perceived conflicts of interest Reports all violations of policy or code of ethics. Works all tickets assigned timely and with accuracy. Assists with moves, putting together furniture, and new building startups and shutdowns. Ensures that all HRMC Emergency calls are responded to. Required to contact supervisor with an update on emergency calls before leaving job site property. Required to answer work phone or respond back within 30 minutes. Ensures that vehicle assigned to technician is maintained. Required to maintain a clean and organized vehicle. The technician is responsible for any and all traffic violations while operating a HRMC vehicle. Observes all safety practices from wearing PPE to being aware of you and your team's safety. Conducts all work in a courteous and professional manner. Leaves all work areas clean of tools and debris, to ensure the safety of all clients and staff. COMPENSATION: Starting salary for this position is approximately $20.31/hour based on relevant experience and education. Schedule: This is a full-time 40 hour per week position; it will require some overtime and will be required for on-call emergency. Travel : Must have valid TN Driver's License. Must be able to drive a Center Vehicle. QUALIFICATIONS - Hamilton Co. Facilities Technician Experience / Knowledge: A minimum of three years' experience is required in the field of building maintenance and/or construction. Some knowledge of computers and computer software. Must be able to work in an environment that includes adults and children. Applicants must be able to work independently, and with minimal supervision, and possess excellent communication and customer service skills. Must be able to drive a center vehicle. Education / License : High school diploma or GED. Three years' experience may be considered in lieu of education. Knowledge of basic electrical, carpentry, plumbing, HVAC systems, construction materials and general construction techniques. Physical/Emotional/Social - Skills/Abilities: Exposure to biological hazards. Hearing of normal and soft tones. Close eye work. Lifting up to 50 lbs. Pushing/pulling up to 150 lbs. Must be able to climb ladder. Frequent sitting, standing, walking, bending, stooping, and reaching. Valid Driver's License Location: Hamilton County, Tennessee Apply today to work where we care about you as an employee and where your hard work makes a difference! Helen Ross McNabb Center is an Equal Opportunity Employer. The Center provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment. Helen Ross McNabb Center conducts background checks, driver's license record, degree verification, and drug screens at hire. Employment is contingent upon clean drug screen, background check, and driving record. Additionally, certain programs are subject to TB Screening and/or testing. Bilingual applicants are encouraged to apply. Compensation details: 20.31-20.31 Hourly Wage PI76afbd48ebe6-1031
Find your calling at Mercy! This is an entry-level position requiring basic knowledge of boiler, HVAC, refrigeration, control system maintenance and operation, plumbing, electricity, carpentry, and painting. It is recommended that incumbents attend one or two years of trade school to prepare them for advancement opportunities. The Facility Systems Technician I position will allow the incumbent to learn operations for HVAC, refrigeration systems, plumbing, electricity, work practices, safety procedures, and become familiar with the respective equipment regulatory requirements. This position will also provide an opportunity to learn proper use of basic tools and equipment necessary to maintain and troubleshoot HVAC and refrigeration systems. This position will support small and mid-size hospitals, critical access hospitals, small inpatient/outpatient facilities, and clinics. The Facility Systems Technician provides the necessary skill to operate, maintain, and repair various electrical/plumbing systems, movable equipment, physical plant equipment, furniture, walls, ceilings, and floors. Utilizes exceptional customer service and communication skills. The purpose of this position is to ensure a safe working environment and support an exceptional Environment of Care for Mercy. Position Details: This is a full time position at Mercy Aurora Benefit Eligible Hours: 7:30a-4p Licensure: - Valid Drivers License for all Mercy locations - Mercy Arkansas Hospitals require High Pressure Boiler Operators License administered by Arkansas Dept. of Labor and Licensing where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma City where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma Dept. of Labor where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Class C Tank Operator Training and Certification required for all Mercy locations. Must achieve certification within 90 days of employment. - Fire door maintenance training program with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. - UL fire stop training with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. Experience: This is an entry-level position with a preference of 1 or more years commercial experience working with any of the following equipment: HVAC, boilers, and refrigeration equipment. Other Skills and Knowledge: - Requires oral and written communication skills to communicate with customers and follow instructions. - Verbal ability required to read and understand technical manuals. - Numerical ability required to make calculations for testing, installation, measurement, estimation and repair of equipment. - Ability to prioritize work assignments, conceptualize and formulate finished product. - Form perception is required when measuring and installing parts and equipment. - Spatial ability required to understand forms and relationships when working from blueprints or specifications. - Requires knowledge and use of various computer software such as Outlook, TMS and/or Nuvolo. - Ability to manage time and materials efficiently. Completes work assignments in a high-quality manner and the lowest cost to Mercy. - Requires exceptional customer service skills and ability to achieve department goals. - Incumbent must achieve favorable results on both oral and written competency exam prior to advancing to Facility Systems Technician II. - Requires general manual dexterity, basic math knowledge, and mechanical aptitude. - Exposure to extreme temperatures, electric shock, and loud noise. Preferred Qualifications Education: High school diploma or equivalent preferred. 2 or more years of training in a Technical or Vocational School. Licensure: Boiler, HVAC, or Refrigeration. Electrical and/or Plumbing. Experience: 1 or more years working as a maintenance technician in a healthcare, educational, or industrial setting. Certification/Registration: EPA approved Universal Certification for handling Refrigerants Must be trained to NFPA 80 regulations for fire door inspection and maintenance. Must be trained to UL standards for fire stopping. ASSE 6040 training for medical gas maintenance Other Skills and Knowledge: Why Mercy? From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period. Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
07/19/2026
Full time
Find your calling at Mercy! This is an entry-level position requiring basic knowledge of boiler, HVAC, refrigeration, control system maintenance and operation, plumbing, electricity, carpentry, and painting. It is recommended that incumbents attend one or two years of trade school to prepare them for advancement opportunities. The Facility Systems Technician I position will allow the incumbent to learn operations for HVAC, refrigeration systems, plumbing, electricity, work practices, safety procedures, and become familiar with the respective equipment regulatory requirements. This position will also provide an opportunity to learn proper use of basic tools and equipment necessary to maintain and troubleshoot HVAC and refrigeration systems. This position will support small and mid-size hospitals, critical access hospitals, small inpatient/outpatient facilities, and clinics. The Facility Systems Technician provides the necessary skill to operate, maintain, and repair various electrical/plumbing systems, movable equipment, physical plant equipment, furniture, walls, ceilings, and floors. Utilizes exceptional customer service and communication skills. The purpose of this position is to ensure a safe working environment and support an exceptional Environment of Care for Mercy. Position Details: This is a full time position at Mercy Aurora Benefit Eligible Hours: 7:30a-4p Licensure: - Valid Drivers License for all Mercy locations - Mercy Arkansas Hospitals require High Pressure Boiler Operators License administered by Arkansas Dept. of Labor and Licensing where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma City where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma Dept. of Labor where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Class C Tank Operator Training and Certification required for all Mercy locations. Must achieve certification within 90 days of employment. - Fire door maintenance training program with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. - UL fire stop training with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. Experience: This is an entry-level position with a preference of 1 or more years commercial experience working with any of the following equipment: HVAC, boilers, and refrigeration equipment. Other Skills and Knowledge: - Requires oral and written communication skills to communicate with customers and follow instructions. - Verbal ability required to read and understand technical manuals. - Numerical ability required to make calculations for testing, installation, measurement, estimation and repair of equipment. - Ability to prioritize work assignments, conceptualize and formulate finished product. - Form perception is required when measuring and installing parts and equipment. - Spatial ability required to understand forms and relationships when working from blueprints or specifications. - Requires knowledge and use of various computer software such as Outlook, TMS and/or Nuvolo. - Ability to manage time and materials efficiently. Completes work assignments in a high-quality manner and the lowest cost to Mercy. - Requires exceptional customer service skills and ability to achieve department goals. - Incumbent must achieve favorable results on both oral and written competency exam prior to advancing to Facility Systems Technician II. - Requires general manual dexterity, basic math knowledge, and mechanical aptitude. - Exposure to extreme temperatures, electric shock, and loud noise. Preferred Qualifications Education: High school diploma or equivalent preferred. 2 or more years of training in a Technical or Vocational School. Licensure: Boiler, HVAC, or Refrigeration. Electrical and/or Plumbing. Experience: 1 or more years working as a maintenance technician in a healthcare, educational, or industrial setting. Certification/Registration: EPA approved Universal Certification for handling Refrigerants Must be trained to NFPA 80 regulations for fire door inspection and maintenance. Must be trained to UL standards for fire stopping. ASSE 6040 training for medical gas maintenance Other Skills and Knowledge: Why Mercy? From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period. Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Position Title: Construction Service Technician Location: Charlotte, NC Job Category: Service Solutions Pay Range: N/A Application Instructions Apply today! Position Description About Us At Barringer, we build more than beautiful spaces - we build lasting relationships and an unforgettable client experience we call The Barringer Way. As a Carolinas-based, 100% employee-owned commercial general contractor, every team member shares in our success through our ESOP, and we've been named the Best Employer in North Carolina by Business NC Magazine two years running (2024 and 2025). We're hiring a Service Technician to join Barringer Service Solutions, our post-construction service arm. If you take pride in your craft, love the variety of tackling different challenges each day, and thrive on turning client headaches into quick wins, this role is built for you. We take care of our team the way we take care of our clients. You'll enjoy 100% employer-paid premiums for dental, vision, short-term disability, and life insurance; a 401(k) with company match; flexible PTO after your first year; tuition reimbursement; a wellness program; pet insurance; and annual donations to your favorite charity. Apply today! What You'll Do As a Service Technician, you're the go-to expert our clients count on when something needs fixing, refreshing, or finishing right. You'll partner closely with our Service Team to deliver the kind of responsive, mint-on-the-pillow experience that keeps clients calling Barringer long after the original project wraps. Tackle a wide variety of service work including carpentry, metal and wood framing, cabinetry, and general maintenance Complete drywall, paint, wallcovering, and water-damage repairs with a finish-quality eye Install doors, frames, hardware, ceiling grid and tile, fixtures, furniture, and partitions Handle space refreshes, picture hanging, and the countless small touches that elevate a space Perform routine inspections and preventative maintenance to keep client facilities running smoothly Coordinate subcontractors on-site and keep the Service Team looped in on progress, issues, and opportunities Communicate directly with clients in a professional, solutions-focused way that reinforces trust Position Requirements What You Bring A craftsman's mindset and genuine pride in quality work Strong attention to detail, with the scheduling discipline to juggle multiple service calls Confident, professional communication skills - you're comfortable interacting with clients, teammates, and subcontractors The ability to interpret written instructions, plans, and schedules without hand-holding A proactive, problem-solving attitude that fits our Creative Problem Solvers culture Experience 3+ years of construction or building maintenance experience Technical training in HVAC, plumbing, electrical, or carpentry is a plus Skills & Tools Safe, confident operation of hand and power tools Valid NC driver's license and comfort driving a company truck English fluency required; additional languages welcome Physical Demands Work performed primarily on active service job sites, on your feet throughout the day Regularly climb ladders and navigate varied site conditions Lift up to 50 lbs independently, more with a partner Work Environment Field-based role across active client sites - indoors and outdoors, with changing temperatures, heights, machinery, and the occasional dusty day Standard weekday schedule with occasional after-hours or weekend calls to meet client needs Equal Opportunity Employer The policy of Barringer Construction is to approach recruiting, hiring, promotion, compensation and professional development practices without regard to race, religion, color, national origin, sex, age, creed, handicap, veteran status, sexual orientation or any other characteristic protected by law. We are fully committed to the principles of equal employment. All employees are expected to participate in helping the Company maintain a climate that is free of workplace harassment and provides equal opportunity for all. All forms of harassment by employees, vendors, visitors, customers, and clients are strictly prohibited and will not be tolerated. This includes sexual harassment and other forms of workplace harassment based upon an individual's sex, gender, race, religion, color, national origin, physical or mental disability, genetic information, marital status, age, sexual orientation, gender identity, AIDS/HIV status, military service, veteran status, or any other status protected by federal, state, or local laws. PI335ba93a39e6-9979
07/14/2026
Full time
Position Title: Construction Service Technician Location: Charlotte, NC Job Category: Service Solutions Pay Range: N/A Application Instructions Apply today! Position Description About Us At Barringer, we build more than beautiful spaces - we build lasting relationships and an unforgettable client experience we call The Barringer Way. As a Carolinas-based, 100% employee-owned commercial general contractor, every team member shares in our success through our ESOP, and we've been named the Best Employer in North Carolina by Business NC Magazine two years running (2024 and 2025). We're hiring a Service Technician to join Barringer Service Solutions, our post-construction service arm. If you take pride in your craft, love the variety of tackling different challenges each day, and thrive on turning client headaches into quick wins, this role is built for you. We take care of our team the way we take care of our clients. You'll enjoy 100% employer-paid premiums for dental, vision, short-term disability, and life insurance; a 401(k) with company match; flexible PTO after your first year; tuition reimbursement; a wellness program; pet insurance; and annual donations to your favorite charity. Apply today! What You'll Do As a Service Technician, you're the go-to expert our clients count on when something needs fixing, refreshing, or finishing right. You'll partner closely with our Service Team to deliver the kind of responsive, mint-on-the-pillow experience that keeps clients calling Barringer long after the original project wraps. Tackle a wide variety of service work including carpentry, metal and wood framing, cabinetry, and general maintenance Complete drywall, paint, wallcovering, and water-damage repairs with a finish-quality eye Install doors, frames, hardware, ceiling grid and tile, fixtures, furniture, and partitions Handle space refreshes, picture hanging, and the countless small touches that elevate a space Perform routine inspections and preventative maintenance to keep client facilities running smoothly Coordinate subcontractors on-site and keep the Service Team looped in on progress, issues, and opportunities Communicate directly with clients in a professional, solutions-focused way that reinforces trust Position Requirements What You Bring A craftsman's mindset and genuine pride in quality work Strong attention to detail, with the scheduling discipline to juggle multiple service calls Confident, professional communication skills - you're comfortable interacting with clients, teammates, and subcontractors The ability to interpret written instructions, plans, and schedules without hand-holding A proactive, problem-solving attitude that fits our Creative Problem Solvers culture Experience 3+ years of construction or building maintenance experience Technical training in HVAC, plumbing, electrical, or carpentry is a plus Skills & Tools Safe, confident operation of hand and power tools Valid NC driver's license and comfort driving a company truck English fluency required; additional languages welcome Physical Demands Work performed primarily on active service job sites, on your feet throughout the day Regularly climb ladders and navigate varied site conditions Lift up to 50 lbs independently, more with a partner Work Environment Field-based role across active client sites - indoors and outdoors, with changing temperatures, heights, machinery, and the occasional dusty day Standard weekday schedule with occasional after-hours or weekend calls to meet client needs Equal Opportunity Employer The policy of Barringer Construction is to approach recruiting, hiring, promotion, compensation and professional development practices without regard to race, religion, color, national origin, sex, age, creed, handicap, veteran status, sexual orientation or any other characteristic protected by law. We are fully committed to the principles of equal employment. All employees are expected to participate in helping the Company maintain a climate that is free of workplace harassment and provides equal opportunity for all. All forms of harassment by employees, vendors, visitors, customers, and clients are strictly prohibited and will not be tolerated. This includes sexual harassment and other forms of workplace harassment based upon an individual's sex, gender, race, religion, color, national origin, physical or mental disability, genetic information, marital status, age, sexual orientation, gender identity, AIDS/HIV status, military service, veteran status, or any other status protected by federal, state, or local laws. PI335ba93a39e6-9979
NALS Apartment Homes believes that an apartment is not simply a place to live, but a place to call home. We embrace opportunities for personal and professional growth, and encourage our employees to share their unique skills, local knowledge, and professional expertise. Our team is the single most important ingredient to our success, and we seek to foster a work environment as welcoming as our apartment communities. We are looking to add a skilled Maintenance Technician to our team at Courtney Downs Apartment Homes. Benefits and Perks Starting compensation: $21 - $25 an hour $150 per week on-call coverage pay Plus, $35 per call-out performed 30% rent discount 10+ days of paid time off in your first year of employment Comprehensive benefits package including medical, dental, vision, life insurance and disability insurance 401(k) with generous employer match Employee assistance program Wellness program Employee referral program Maintenance training & certification programs Along with tons of other great benefits and amazing perks! What you will do Ensure all service requests, callbacks, and/or work orders are performed properly and promptly Complete assigned maintenance make-ready sheets Turn vacant apartments Maintain pools and spas, including chemical testing and furniture cleanliness Maintain property grounds, workplace, and maintenance shop Respond to after-hour calls and emergencies Perform additional duties, responsibilities, or projects as assigned Minimum 1 year of multifamily maintenance experience Previous painting experience preferred Skills relating to all building systems Knowledge and understanding of the unit turn process Knowledge in plumbing and pool and spa Familiar with appliance repair, electrical repairs, and basic roofing repairs Valid drivers' license and current auto insurance may be required 40-hour work week, including on-call rotation; weekend availability required while on-call Working inside and outside in all types of weather Medium to heavy work, requiring prolonged or repeated standing, walking, climbing, stooping, kneeling, crouching, and lifting to a maximum of 100 lbs., with frequent lifting and carrying of up to 50 lbs. Good hand and eye coordination are essential, including the ability to ascend and descend ladders and stairs, and perform repetitive/continuous tasks according to set procedures and sequences This career position is a great opportunity for someone who is seeking longevity and growth. To learn more about our communities and team culture, check us out on Facebook and Instagram. Compensation details: 21-25 Hourly Wage PI5-
07/13/2026
Full time
NALS Apartment Homes believes that an apartment is not simply a place to live, but a place to call home. We embrace opportunities for personal and professional growth, and encourage our employees to share their unique skills, local knowledge, and professional expertise. Our team is the single most important ingredient to our success, and we seek to foster a work environment as welcoming as our apartment communities. We are looking to add a skilled Maintenance Technician to our team at Courtney Downs Apartment Homes. Benefits and Perks Starting compensation: $21 - $25 an hour $150 per week on-call coverage pay Plus, $35 per call-out performed 30% rent discount 10+ days of paid time off in your first year of employment Comprehensive benefits package including medical, dental, vision, life insurance and disability insurance 401(k) with generous employer match Employee assistance program Wellness program Employee referral program Maintenance training & certification programs Along with tons of other great benefits and amazing perks! What you will do Ensure all service requests, callbacks, and/or work orders are performed properly and promptly Complete assigned maintenance make-ready sheets Turn vacant apartments Maintain pools and spas, including chemical testing and furniture cleanliness Maintain property grounds, workplace, and maintenance shop Respond to after-hour calls and emergencies Perform additional duties, responsibilities, or projects as assigned Minimum 1 year of multifamily maintenance experience Previous painting experience preferred Skills relating to all building systems Knowledge and understanding of the unit turn process Knowledge in plumbing and pool and spa Familiar with appliance repair, electrical repairs, and basic roofing repairs Valid drivers' license and current auto insurance may be required 40-hour work week, including on-call rotation; weekend availability required while on-call Working inside and outside in all types of weather Medium to heavy work, requiring prolonged or repeated standing, walking, climbing, stooping, kneeling, crouching, and lifting to a maximum of 100 lbs., with frequent lifting and carrying of up to 50 lbs. Good hand and eye coordination are essential, including the ability to ascend and descend ladders and stairs, and perform repetitive/continuous tasks according to set procedures and sequences This career position is a great opportunity for someone who is seeking longevity and growth. To learn more about our communities and team culture, check us out on Facebook and Instagram. Compensation details: 21-25 Hourly Wage PI5-
Description: NALS Apartment Homes believes that an apartment is not simply a place to live, but a place to call home. We embrace opportunities for personal and professional growth, and encourage our employees to share their unique skills, local knowledge, and professional expertise. Our team is the single most important ingredient to our success, and we seek to foster a work environment as welcoming as our apartment communities. We are looking to add a skilled Maintenance Technician to our team at The Colonnade Luxury Apartments - located in Hillsboro, OR. Benefits and Perks Starting compensation: $22 - $25 an hour $100 per week on-call coverage pay Plus, $35 per call-out performed 30% rent discount 10+ days of paid time off in your first year of employment Comprehensive benefits package including medical, dental, vision, life insurance and disability insurance 401(k) with generous employer match Employee assistance program Wellness program Employee referral program Maintenance training & certification programs Along with tons of other great benefits and amazing perks! What you will do Ensure all service requests, callbacks, and/or work orders are performed properly and promptly Complete assigned maintenance make-ready sheets Turn vacant apartments Maintain pools and spas, including chemical testing and furniture cleanliness Maintain property grounds, workplace, and maintenance shop Respond to after-hour calls and emergencies Perform additional duties, responsibilities, or projects as assigned Requirements: Minimum 1 year of multifamily maintenance experience Painting experience preferred Skills relating to all building systems Knowledge and understanding of the unit turn process Knowledge in plumbing and pool and spa Familiar with appliance repair, electrical repairs, and basic roofing repairs Valid drivers' license and current auto insurance may be required 40-hour work week, including on-call rotation; weekend availability required while on-call Working inside and outside in all types of weather Medium to heavy work, requiring prolonged or repeated standing, walking, climbing, stooping, kneeling, crouching, and lifting to a maximum of 100 lbs., with frequent lifting and carrying of up to 50 lbs. Good hand and eye coordination are essential, including the ability to ascend and descend ladders and stairs, and perform repetitive/continuous tasks according to set procedures and sequences This career position is a great opportunity for someone who is seeking longevity and growth. To learn more about our communities and team culture, check us out on Facebook and Instagram. Compensation details: 22-25 Hourly Wage PI11b4454ba4ec-2374
07/06/2026
Full time
Description: NALS Apartment Homes believes that an apartment is not simply a place to live, but a place to call home. We embrace opportunities for personal and professional growth, and encourage our employees to share their unique skills, local knowledge, and professional expertise. Our team is the single most important ingredient to our success, and we seek to foster a work environment as welcoming as our apartment communities. We are looking to add a skilled Maintenance Technician to our team at The Colonnade Luxury Apartments - located in Hillsboro, OR. Benefits and Perks Starting compensation: $22 - $25 an hour $100 per week on-call coverage pay Plus, $35 per call-out performed 30% rent discount 10+ days of paid time off in your first year of employment Comprehensive benefits package including medical, dental, vision, life insurance and disability insurance 401(k) with generous employer match Employee assistance program Wellness program Employee referral program Maintenance training & certification programs Along with tons of other great benefits and amazing perks! What you will do Ensure all service requests, callbacks, and/or work orders are performed properly and promptly Complete assigned maintenance make-ready sheets Turn vacant apartments Maintain pools and spas, including chemical testing and furniture cleanliness Maintain property grounds, workplace, and maintenance shop Respond to after-hour calls and emergencies Perform additional duties, responsibilities, or projects as assigned Requirements: Minimum 1 year of multifamily maintenance experience Painting experience preferred Skills relating to all building systems Knowledge and understanding of the unit turn process Knowledge in plumbing and pool and spa Familiar with appliance repair, electrical repairs, and basic roofing repairs Valid drivers' license and current auto insurance may be required 40-hour work week, including on-call rotation; weekend availability required while on-call Working inside and outside in all types of weather Medium to heavy work, requiring prolonged or repeated standing, walking, climbing, stooping, kneeling, crouching, and lifting to a maximum of 100 lbs., with frequent lifting and carrying of up to 50 lbs. Good hand and eye coordination are essential, including the ability to ascend and descend ladders and stairs, and perform repetitive/continuous tasks according to set procedures and sequences This career position is a great opportunity for someone who is seeking longevity and growth. To learn more about our communities and team culture, check us out on Facebook and Instagram. Compensation details: 22-25 Hourly Wage PI11b4454ba4ec-2374
CNAs/CMAs Base Pay: $11.75 - $14.91 / Hour Description ROLE (summary): Under general supervision of a licensed nurse, administers medications to residents according to the Physician's orders and MAR and within the guidelines of state regulations and certification RESPONSIBILITIES (task): Administers to residents the correct medications, by the correct route, in the correct dosage, at the correct time Maintain confidentiality regarding each resident's condition, medication, treatments, and records Complete documentation as required including the medication record Preserve the dignity, privacy and respect of all residents Maintain a safe, clean environment for residents Keep medications properly secured and stored Assist C.N.A's with resident care duties Alert nurse to observed signs of pain and discomfort, need for additional assessment, or medication refusals Any other tasks/duties assigned by Wellness Director or designee Will not administer any medication or treatment outside of the scope of the individuals certification level JOB SPECIFICATIONS: (education, experience, licenses, training, knowledge, skills, abilities) At least 19 years of age with completion of state-approved training program and certification Good reading, writing and verbal communication Possess basic computer skills Detailed-orientated and able to multi-rask Good interpersonal and observational skills First aide/ CPR Training Possess either a medication administration Technician, certified Medication Aide, or Advanced Certified Medication Aide Certification Requirements Physical and Mental requirements: Good physical health with no limitations: able to physically care for residents, lift, transfer residents and push medication carts: good mental health and emotional maturity: the ability to be understanding, patient and not easily frustrated. Email: ------------------------------------------ Housekeeper Base Pay: $9.50/hr Description: Housekeepers ensure that resident living quarters/homes and immediate areas are cleaned as scheduled. RESPONSIBILITIES: (tasks) * Demonstrate correct procedures and sufficient gross and fine motor skills in sweeping and mopping hard surfaces, carpet-spot cleaning and vacuuming and shampooing carpeted surfaces * Clean areas thoroughly, creating a minimal need for repeat of tasks * Trash and waste are removed promptly and according to schedule * Dust furniture regularly according to schedules * Report all safety hazards to supervisor * Follow the dress code Policy and Procedures of the department JOB SPECIFICATIONS: (education, experience, licenses, training, knowledge, skills, abilities) * 3 years of experience as a housekeeper * Able to read, write and communicate proficiently in English PHYSICAL AND MENTAL REQUIREMENTS: Able to stand, sit or walk for long periods of time; able to lift 35 lbs.; good physical condition; emotionally stable to deal with the daily stresses of the job and able to seek help when needed. Summary Ensure that resident apartments and common areas are kept clean Email: _----------------------------------------- Evening Cook Description: A Cook will prepare meals and follow established recipes. Duties include preparing ingredients, adhering to the dining menu, and following food health and safety procedures. They will ensure freshness, promptness, and quality of dishes, in addition to cook, prep, clean, assist other cooks/staff, and deliver quality food(s) for HCLG resident dining environments. RESPONSIBILITIES: (tasks) * Responsible for the preparation of quality food for meals and caterings that promotes high resident satisfaction in all dining rooms * Provide outstanding customer service to residents and staff *Maintain a professional attitude * Document temperatures of food, freezers, refrigerators and dish machines * Responsible for ServSafe and educational compliance * Responsible for the sanitation of the kitchen equipment and storage units * Attend meeting and committee as needed * Assist with QAPI project development and implementation JOB SPECIFICATIONS: (education, experience, licenses, training, knowledge, skills, abilities) * High School diploma or equivalent * Minimum of 1 year experience cooking in a commercial setting PHYSICAL AND MENTAL REQUIREMENTS: * Ability to lift, bend, climb, reach, push and pull as needed. * Ability to meet deadlines Requirements: Food Handler (Preferred) Summary Team Environment ------------------------------------------ LPN RESPONSIBILITIES: (tasks) * Administer and manage patient medication as prescribed by physician, with med errors not exceeding 5% * Accurately and promptly complete nursing assessments, resident care plans, documentation * Participate in resident care plan by monitoring progress, communicating behaviors and responses to families, other staff members and physicians * Maintain a safe, orderly and therapeutic physical environment for residents * Process physician orders, schedule procedures * Supervise and ensure quality care and assistance to the residents by CNAs, RAs, and/or MAs. * Direct CNAs, RAs, and/or MAs. * Maintain HIPAA and confidentiality * Work with consultants and implement changes as necessary * Participate in survey process * Answer call lights and respond to alarms and emergencies JOB SPECIFICATIONS: (education, experience, licenses, training, knowledge, skills, abilities) * At least 18 years of age; Licensed Practical Nurse license in good standing * Current BLS certification * Good written and oral communication skills; ability to interact effectively with care team, staff members, and families * Good organizational, problem solving, and time management skills; flexibility to handle and prioritize frequent interruptions *Basic computer skills PHYSICAL AND MENTAL REQUIREMENTS: Good physical health with no limitations; able to physically care for residents including lifting, transferring; physical stamina and ability to perform CPR; good mental health and have emotional maturity to maintain self-control in any number of trying circumstances; mental and emotional resilience, able to maintain an even temperament; emotional stability; ability to understand and cope with the stresses related to the job; capacity to seek professional and personal support appropriately, and as needed. ------------------------------------------ recblid apwvrf89w40p6fbiwj9l2b98p7lfmb
09/13/2020
Full time
CNAs/CMAs Base Pay: $11.75 - $14.91 / Hour Description ROLE (summary): Under general supervision of a licensed nurse, administers medications to residents according to the Physician's orders and MAR and within the guidelines of state regulations and certification RESPONSIBILITIES (task): Administers to residents the correct medications, by the correct route, in the correct dosage, at the correct time Maintain confidentiality regarding each resident's condition, medication, treatments, and records Complete documentation as required including the medication record Preserve the dignity, privacy and respect of all residents Maintain a safe, clean environment for residents Keep medications properly secured and stored Assist C.N.A's with resident care duties Alert nurse to observed signs of pain and discomfort, need for additional assessment, or medication refusals Any other tasks/duties assigned by Wellness Director or designee Will not administer any medication or treatment outside of the scope of the individuals certification level JOB SPECIFICATIONS: (education, experience, licenses, training, knowledge, skills, abilities) At least 19 years of age with completion of state-approved training program and certification Good reading, writing and verbal communication Possess basic computer skills Detailed-orientated and able to multi-rask Good interpersonal and observational skills First aide/ CPR Training Possess either a medication administration Technician, certified Medication Aide, or Advanced Certified Medication Aide Certification Requirements Physical and Mental requirements: Good physical health with no limitations: able to physically care for residents, lift, transfer residents and push medication carts: good mental health and emotional maturity: the ability to be understanding, patient and not easily frustrated. Email: ------------------------------------------ Housekeeper Base Pay: $9.50/hr Description: Housekeepers ensure that resident living quarters/homes and immediate areas are cleaned as scheduled. RESPONSIBILITIES: (tasks) * Demonstrate correct procedures and sufficient gross and fine motor skills in sweeping and mopping hard surfaces, carpet-spot cleaning and vacuuming and shampooing carpeted surfaces * Clean areas thoroughly, creating a minimal need for repeat of tasks * Trash and waste are removed promptly and according to schedule * Dust furniture regularly according to schedules * Report all safety hazards to supervisor * Follow the dress code Policy and Procedures of the department JOB SPECIFICATIONS: (education, experience, licenses, training, knowledge, skills, abilities) * 3 years of experience as a housekeeper * Able to read, write and communicate proficiently in English PHYSICAL AND MENTAL REQUIREMENTS: Able to stand, sit or walk for long periods of time; able to lift 35 lbs.; good physical condition; emotionally stable to deal with the daily stresses of the job and able to seek help when needed. Summary Ensure that resident apartments and common areas are kept clean Email: _----------------------------------------- Evening Cook Description: A Cook will prepare meals and follow established recipes. Duties include preparing ingredients, adhering to the dining menu, and following food health and safety procedures. They will ensure freshness, promptness, and quality of dishes, in addition to cook, prep, clean, assist other cooks/staff, and deliver quality food(s) for HCLG resident dining environments. RESPONSIBILITIES: (tasks) * Responsible for the preparation of quality food for meals and caterings that promotes high resident satisfaction in all dining rooms * Provide outstanding customer service to residents and staff *Maintain a professional attitude * Document temperatures of food, freezers, refrigerators and dish machines * Responsible for ServSafe and educational compliance * Responsible for the sanitation of the kitchen equipment and storage units * Attend meeting and committee as needed * Assist with QAPI project development and implementation JOB SPECIFICATIONS: (education, experience, licenses, training, knowledge, skills, abilities) * High School diploma or equivalent * Minimum of 1 year experience cooking in a commercial setting PHYSICAL AND MENTAL REQUIREMENTS: * Ability to lift, bend, climb, reach, push and pull as needed. * Ability to meet deadlines Requirements: Food Handler (Preferred) Summary Team Environment ------------------------------------------ LPN RESPONSIBILITIES: (tasks) * Administer and manage patient medication as prescribed by physician, with med errors not exceeding 5% * Accurately and promptly complete nursing assessments, resident care plans, documentation * Participate in resident care plan by monitoring progress, communicating behaviors and responses to families, other staff members and physicians * Maintain a safe, orderly and therapeutic physical environment for residents * Process physician orders, schedule procedures * Supervise and ensure quality care and assistance to the residents by CNAs, RAs, and/or MAs. * Direct CNAs, RAs, and/or MAs. * Maintain HIPAA and confidentiality * Work with consultants and implement changes as necessary * Participate in survey process * Answer call lights and respond to alarms and emergencies JOB SPECIFICATIONS: (education, experience, licenses, training, knowledge, skills, abilities) * At least 18 years of age; Licensed Practical Nurse license in good standing * Current BLS certification * Good written and oral communication skills; ability to interact effectively with care team, staff members, and families * Good organizational, problem solving, and time management skills; flexibility to handle and prioritize frequent interruptions *Basic computer skills PHYSICAL AND MENTAL REQUIREMENTS: Good physical health with no limitations; able to physically care for residents including lifting, transferring; physical stamina and ability to perform CPR; good mental health and have emotional maturity to maintain self-control in any number of trying circumstances; mental and emotional resilience, able to maintain an even temperament; emotional stability; ability to understand and cope with the stresses related to the job; capacity to seek professional and personal support appropriately, and as needed. ------------------------------------------ recblid apwvrf89w40p6fbiwj9l2b98p7lfmb
