155 jobs found

Assistant Director - Special Facilities Management Job ID: 14653 Location: El Paso, TX Full/Part Time: Full Time Regular/Temporary: Regular Position Information Hiring Department: Special Facilities Management Department Posting End Date: Open until filled. Hours: 40 hours per week, standard Monday- Friday 8:00am- 5:00pm, flexibility is required on evenings and weekends FLSA status: Exempt Earliest Start Date: As soon as possible. Salary: Commensurate with experience. Required Application Materials: Resume Cover Letter List of three references Note: To the extent that this position involves research, work, or access to critical infrastructure as referenced in Executive Order GA-48, being hired for and continuing to be employed in this position requires the ability to maintain the security or integrity of the infrastructure. The primary accountabilities are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code 51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions. Position Summary Summary: Reports to, and administratively assists, the Director of Special Facility Management in all functions of the Special Events Department. The Assistant Director of Special Facility Management will oversee operations and perform management functions at venues and events in the Office of Special Events. The Assistant Director will be responsible for day-to-day operations to ensure all event needs are met. This position will work closely with staff to provide a high level customer service in order to ensure a friendly, safe environment at all events, and work with operations and technical team on developing policies and procedures, assist with planning and cost estimates. Additionally, the Assistant Director will oversee personnel staffing, job performance, budget, equipment and supplies inventory, and provide input on venue improvements. Note: The primary accountabilities below are intended to describe the general content of and requirements of this position and are not intended to be an exhaustive statement of duties. Incumbents may perform all or some of the primary accountabilities listed below. Specific tasks or responsibilities will be documented in the incumbents' performance objectives as outlined by the incumbents' immediate supervisor or manager. This position is security-sensitive and subject to Texas Education Code 51.215, which authorizes the employer to obtain criminal history record information. A valid driver's license issued by the State where the applicant resides and insurability as defined in UTS 157 may be required to perform the position's essential functions. Statement of Duties and Responsibilities: Coordinate the events calendar and assigns daily work to supervisors. Assist with the scheduling of full time and part time staff for all events. Prioritize posts and determine suitable staffing levels with Supervisors. Assists with event layouts and planning. Assists with event execution from inception to restore. Inspect and assure that final event setup thoroughly matches the Requisition or Production Advance before client arrives. Acts as the liaison with live event production staff regarding security and event operations for ticketed and nonticketed events. Supervises and participates in Athletics Game Day Management; Serves as manager on duty, as required. Oversee the maintenance of the special use facilities grounds and facility equipment. Ensures the quality of services and workmanship by managing, planning, scheduling, supervising engineering and electrical maintenance personnel. Works with Facilities Services on campus to implement the most efficient and cost effective means for operation of mechanical systems, HVAC systems and lighting systems. Manages resources to ensure compliance with budget objectives, and standards of facility and equipment repair, equipment inventory and cost control. Responsible for ensuring that outside work performed by other departments, contractors, and/or vendors for the facilites are coordinated through the office to insure the work is conducted within prescribed industry standards and norms. Assists in seeking outside clients and events to create additional revenues for the Don Haskins Center, Sun Bowl Stadium, Magoffin Auditorium for the department. Monitors the formulation and coordination of account specifications, requirements for monetary transactions, and associated documents; reviews and approves negotiated agreements for area(s) of assigned responsibility. Reviews cost factors and estimates used in planning, organizing, and scheduling work, preparing bids, selecting vendors or subcontractors, and determining cost effectiveness. Assists in timekeeping software and payroll procedures for part time staff working in the Auxiliary Services Shared Pool. Conducts overall management of a full time supervisors, student work-studies, and internship/volunteer programs. Interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; coaching and counseling subordinates; rewarding and disciplining employees; addressing complaints and resolving problem. Understands department's role in accomplishing the University's mission. Acts as liaison between University Departments and External Clients. Participates in various committees, professional trainings, industry conferences, and conventions. knowledge of all Microsoft Office software, Autodesk CAD software, and able to learn and use institutional software systems. Promotes organization policies and procedures in compliance with local, state, and federal rules and regulations; advises University personnel regarding the development and implementation of regulatory strategy, potential areas of regulatory concern, and new government/regulatory developments. Provides training policies, standards, guidelines, and security monitoring processes in relation to general control, privacy regulations, and development and operation of the University's infrastructure. Knowledge of all Microsoft Office software and able to learn and use institutional software systems. Complies with all State and University policies. Other duties may be assigned. Supervisory Responsibilities Carries out supervisory responsibilities in accordance with the organization's objectives, policies and applicable laws. Qualifications Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications: Education: Bachelor's Degree and Experience: Three to 5 years years of experience, and/or training to the essential duties and responsibilities; or equivalent combination of education and experience. Occasional traveling required. Preferred Qualifications: 5+ years related experience (Venue Management, Facility Management, Event Management and/or production, Event Promotion); and a minimum of (2) years of supervisory experience. Strong communicator with proven ability to drive projects assigned to completion. Excellent organizational skills and attention to detail. Ability to foster and develop good working relationships with the University's internal clients as well as clients in the entertainment sectors. Strong written and verbal communication skills. Strong customer service skills. Ability to coordinate multiple projects. Creativity and proven problem solving skills. Ability to work non-traditional hours to include evenings and weekends. Proven ability and knowledge to work with professionals in the live entertainment business. Ability to work well with faculty, staff, students, and the general public. Why Pick UTEP About the University of Texas at El Paso UTEP is a comprehensive public research university that is increasing access to excellent higher education. We advance discovery of public value and positively impact the health, culture, education, and economy of the community we serve. The University of Texas at El Paso is America's leading Hispanic-serving university. Located at the westernmost tip of Texas, where three states and two countries converge along the Rio Grande, 84% of our 24,000 students are Hispanic, and more than half are the first in their families to go to college. UTEP offers 172 bachelor's, master's and doctoral degree programs at the only open-access, top-tier research university in America. About VP Business Affairs . click apply for full job details

Plumber Department: Campus Planning & Facilities Management Classification: Plumber Appointment Type and Duration: Regular, Ongoing Salary: $30.11-$46.18 per hour FTE: 1.0 Review of Applications Begins January 7, 2026; position open until filled Special Instructions to Applicants To be considered for this position, applicants must submit a complete application. Complete applications must include an online application and resume that address how you meet the minimum and preferred qualifications. We are interested in finding the best candidate for the position. We encourage you to apply, even if you don't think you meet every one of our preferred qualifications - use your application to let us know what is meaningful to you about the role and what transferable skills or other qualities you would bring. Department Summary Campus Planning and Facilities Management (CPFM) is a dynamic unit within the Finance and Administration portfolio, comprising seven departments and approximately 300 dedicated employees: Building Operations and Maintenance Campus Planning Custodial and Exterior Services Design & Construction Work Management and Administrative Support Office of Sustainability Utilities & Energy CPFM is responsible for planning, building, maintaining, and operating the infrastructure that supports the University of Oregon. As stewards of the university's physical legacy, CPFM empowers the university community to reach its full potential by providing a campus that is safe, clean, beautiful, inspiring, and environmentally responsible. CPFM is committed to collaboration, service excellence, diversity, problem-solving, and stewardship. We take pride in ensuring the campus functions seamlessly, fostering an environment where educational excellence can thrive. Building Operations and Maintenance includes Maintenance Support, Carpentry, Building Automation Systems (BAS), Electrical, Painting, Plumbing, Mechanical, Lock and Door, and Fleet Services. These teams handle the maintenance, repair, and minor renovation of university buildings, vehicles, and equipment at the Eugene and Portland campuses. Their work ensures that the University of Oregon community has a safe, efficient, reliable, functional, and attractive learning environment, supporting the University's mission and vision. Together, they are committed to creating a place where excellence thrives and everyone can succeed. Position Summary The purpose of the Plumber position is to provide technical support in helping achieve overall University of Oregon goals by performing the duties of a plumber for Facilities Services. The primary duties of this position are maintaining, repairing, replacing, and installing plumbing fixtures, potable and non-potable water systems, dewatering and waste systems, steam, gas, compressed air, vacuum systems, reverse osmosis system, and other related systems, primarily within research facilities. Facilities are located throughout campus, therefore materials and tools are transported in university vehicles to the various work locations. This position is an integral part of a maintenance team dedicated to providing the campus community with a quality physical environment in which to work and study. This position will be responsible for maintaining all types of piping systems, including: vent, waste, storm (inside and outside of facilities), potable and non-potable hot and cold water, heating and cooling pipe systems, nitrogen and natural gas, compressed air, reverse osmosis water and steam lines, as well as associated specialty devices. Maintaining these types of piping systems will often include repairing or replacing faucets, valves, plumbing fixtures of all kinds, regulating valves, vacuum breakers, trap primers, circulating pumps, heating and chilled water pumps and valves, sump pumps, sewer pumps, water heaters, gas cocks, etc. Tasks may also include cleaning stoppages, making sectional replacements, flushing and ensuring proper attachment through inspection and adjustment of hangers, as well as new plumbing installations that encompass supply, waste, vent, gas, and steam using all types of piping systems such as glass, plastics, copper, galvanized, and black. This position will operate powered drain cleaning machines and pipe threading machines. Interactions/contacts occur daily with the campus community in the course of performing work and responding to emergencies. This position works as a member of a team while frequently performing tasks independently. Decisions may be made about the best method and materials necessary to perform a particular task. They may also include setting priorities, assessing customer needs and responding to those needs. Work is reviewed regularly by the Supervisor to ensure it is performed efficiently, safely, and meets both expectations and applicable requirements. A performance appraisal is conducted annually. This position will be required to participate in on-call duties after hours on a rotating basis. Physical Demands This position will often need to lift heavy equipment, up to 50 pounds. Special Requirement This position will require a valid driver's license and the ability to obtain UO Driver's Certification. Essential Personnel This unit may provide essential services during times of emergencies and inclement weather. This position may be required to fulfill essential services and functions during these times. On-call Rotation This position may be required to participate in an on call rotation. Being on call requires the participant to live in an area with cell phone reception or to be within cell phone reception for the entire duration of the on call period. On call also requires the participant to be within a 1 hour drive of the UO campus for the entire duration of the on call period to be able to respond to issues if needed. On call periods are typically 1-4 weeks in duration. Minimum Requirements A valid Oregon Plumber's license; AND One of the following: - One year of experience as a journey-level plumber; or - Completion of an approved apprenticeship program. Professional Competencies Perform duties in a way that advances and supports the mission of the department and university. Work effectively in a diverse team environment and create effective relationships for problem-solving and positive interactions. Take initiative, looking for what needs to be done and doing it. Pay close attention to detail. Maintain a safe and safety-conscious workplace. Maintain a respectful workplace and model a positive and proactive attitude. Model the highest ethical standards. Provide superior customer service. Knowledge of Plumbing Code. Preferred Qualifications Experience in higher education facilities. Experience in industrial/commercial facilities as a plumber. Experience with service work as a plumber. Five years of facility plumbing maintenance experience. Welding/brazing experience. Experience with computerized maintenance management system. Experience operating powered drain cleaning machines and pipe threading machines. Level 5 Steam Fitter Certification. Current back-flow certification. FLSA Exempt: No All offers of employment are contingent upon successful completion of a background check. This is a classified position represented by the SEIU Local 503, Oregon Public Employees Union. The University of Oregon is proud to offer a robust benefits package to eligible employees, including health insurance, retirement plans, and paid time off. For more information about benefits, visit our website . The University of Oregon is an equal-opportunity institution committed to cultural diversity and compliance with the Americans with Disabilities Act. The University encourages all qualified individuals to apply and does not discriminate on the basis of any protected status, including veteran and disability status. The University is committed to providing reasonable accommodations to applicants and employees with disabilities. To request an accommodation in connection with the application process, please email us or call . UO prohibits discrimination on the basis of race, color, religion, national origin, sex, sexual orientation, gender identity, gender expression, pregnancy (including pregnancy-related conditions), age, physical or mental disability, genetic information (including family medical history), ancestry, familial status, citizenship, service in the uniformed services (as defined in federal and state law), veteran status, expunged juvenile record, and/or the use of leave protected by state or federal law in all programs, activities and employment practices as required by Title IX, other applicable laws, and policies. Retaliation is prohibited by UO policy. Questions may be referred to the Office of Equal Opportunity and Access. Contact information, related policies, and complaint procedures are listed here . In compliance with federal law, the University of Oregon prepares an annual report on campus security and fire safety programs and services. The Annual Campus Security and Fire Safety Report is available In compliance with federal law, the University of Oregon prepares an annual report on campus security and fire safety programs and services. The Annual Campus Security and Fire Safety Report is available online . To apply, visit . click apply for full job details

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At Boeing, we are all innovators on a mission to connect, protect, explore and inspire. From the seabed to outer space, you'll learn and grow, contributing to work that shapes the world. Find your future with us! Boeing Test and Evaluation (BT&E) is seeking a Instrumentation Technician C to join our teams in Seattle, WA. In this role, you will work with blueprints, schematics, technical manuals and bulletins, National Bureau of Standards, manufacturers' specifications, oral and written instructions. You will be installing instrumentation, primarily strain gauges and thermocouples on all models of Boeing aircraft civilian, military and space. Position Responsibilities: Receive work assignment from team leader or supervisor and obtain necessary materials and equipment Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work assignment Fabricate wire or fiber optic bundles used to connect various types of test and computer equipment together or test sensing equipment used to monitor and measure, for the purpose of collecting and storing data during test Set up and perform qualification test, bench test, or automatic test as required per work assignment, test document, test equipment manuals, and/or engineering instructions Install fiber optic strain gages, thermocouples, accelerometers, and strain gages by soldering, bonding, spot welding, or using mechanical fastening devices Use a scissor or boom lift to access areas for instrumentation installation this work is performed both inside hangars and outside on airfields Perform modification of test equipment to meet engineering configuration, as required Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander, as required Use shop tools and any test equipment required to complete work assignment Write tie-ins, and maintain records such as work log for areas/equipment as required Devise and/or build shop aids and work around methods as necessary to test/troubleshoot systems Handle and protect components and assemblies such as static sensitive equipment in accordance with shop procedures and drawing requirements Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Safety Data Sheets) using personal protective equipment as required Pack electronic equipment for travel as required per drawing and Boeing applicable specifications Check work after completion of each operation to be sure job is per drawing or other instructions Put completed job or reworked job up for inspection as required Contact team leader/supervisor/engineer/planner when assistance is needed (e.g. if there is questions about drawings or paperwork, if drawings and paperwork do not match, or when any other problem arises) Maintain personal and tool certifications, as required Comply with applicable tool control policies Effectively accomplishing the tasks, duties and responsibilities of this job requires at least these attributes Ability to use precision measuring tools and test equipment and interpret results Knowledge of routing, clamping, tying, connecting and terminating wires and/or wire bundles in electrical systems and assemblies, per the appropriate electrical codes Knowledge of aircraft electrical and mechanical systems Ability to calculate and apply advanced mathematics Know and interpret data from a coordinate system to identify multiple axis and dimensional references (3-D) Ability to set up and operate floor mounted hydraulic and/or mechanical operated equipment Ability to demonstrate entry level competency in operation of PIT (Power Industrial Trucks), in a safe manner as required Ability to safely operate various types of hand tools and/or hand-held power tools as required Effectively communicate information Knowledge of basic electricity and electrical systems Operate various types of test equipment, perform testing and interpret results, as required Knowledge of proper use, handling, and disposal of hazardous materials/chemicals, oils, coolants, and lubricants per government regulations and Boeing procedures Travel up to 10% of the time, both domestically and internationally. The following Physical Demands may be requirements of this job: Frequent (3-6 Hrs.) Carrying less than 10 pounds; Climbing/balancing (stairs, ladders, poles, scaffold); Finger manipulation (keyboarding, other); Flexion/Extension (head bent down, head bent back); Handling (holding, grasping); Lifting less than 10 pounds; Reaching (overhead); Rotation of head/neck; Sitting; Standing; Walking Occasional (1-3 Hrs.) Bending at the waist; Carrying 10-35 pounds; Twisting at the waist; Use of low impact vibratory tools (drilling/sanding); Lying down (back, side, front); Operating of foot controls; Pushing/pulling 10-35 pounds; Pushing/pulling less than 10 pounds; Kneeling; Lifting 10-35 pounds; Crawling; Crouching (squatting) The following Chemicals/Materials may be requirements of this job: Frequent (3-6 Hrs.) Metals (aluminum, brass, iron, Monel, nickel, steel); Plastics (acrylic, fiberglass, graphite, resins); Sealants (latex, polysulfide, silicon); Solvents (acetone, turpentine, MEK, MPK, Isopropho); Adhesives (epoxy, acrylonitrile, organic rubber) Occasional (1-3 Hrs.) Alkalis (acid neutralizers, strong detergents); Liquid Coatings (etching mask, lacquer, penetrant d); Acids (boric, muriatic, nitric, hydrochloric) The following Environmental Conditions may be requirements of this job: Continuous (6-8 Hrs.) Noise (constant or intermittent sounds or pitch) Frequent (3-6 Hrs.) Nonionizing Radiation (sub-radio frequency, radio); Elevated Platforms (wings, lifts, cranes, ladders); Extreme Heat (ovens and furnaces) Occasional (1-3 Hrs.) Atmospheric Conditions (fumes, noxious odors, dust); Confined Spaces; Welding Equipment (Arc/Cutting, Flux-Cored, Gas-Me) The following Personal Protective Equipment may be requirements of this job: Continuous (6-8 Hrs.) Face/Eye Protection (safety glasses, goggles); Fall Protection (safety belts, harnesses, lifeline); Protective Footwear (steel-toed shoes, rubber boot) Frequent (3-6 Hrs.) Protective Headwear (welding helmets, hard hats); Hand/Arm Protection (gloves, arm protectors); Hearing Protection (ear inserts, canal caps, earmuff) This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience): 1+ year of experience reading and interpreting wire harness diagrams and installation schematics 1+ year of experience in electrical (wire shop) fabrication and required processes Preferred Qualifications (Desired Skills/Experience): 3+ years of strain gaging experience 3+ years of experience in Aircraft Electrical systems Certification(s) in: Electrical (Crimping, Bond and Ground); Mechanical (Fork lift, Hand truck, Pressure/vacuum); or Safety (Electrical, Egress, Explosives) Shift: This position is for 1st shift. This position may require travel up to 10% of the time, both domestically and internationally. Union: This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $27.32/hour - $57.88/hour Applications for this position will be accepted until Jan. 10, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington. We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements. Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources. Conduct continuity checks to ensure proper functionality of electrical systems. Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks. Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced. Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments. Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor. Perform hand forming of electrical wiring and soldering as required to complete work assignments. Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments. Execute necessary riveting tasks as part of the assembly process. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications 1+ years of experience in electrical assembly installation. 1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO). 1+ years of experience handling chemicals and/or hazardous materials. Ability to recognize colors. Ability to work in confined spaces. Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance. Proficiency in reading, writing, and speaking English. Preferred Qualifications: 1+ years of experience as an Electrician or Apprentice. Completion of an electrical trade school program or have military related electrical experience. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jul. 09, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Wire Assembler- Repair to join our Electrical Assembly team in Everett, Washington. As a Wire Assembler- Repair, you will play a crucial part in the assembly and fabrication of high-precision components, ensuring that each product meets our quality standards. Your commitment to safety and attention to detail will be essential as you work with a variety of materials and tools, contributing to the creation of innovative solutions that drive our success. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble, join, mechanically fasten, or rework parts and assemblies to create subassemblies that meet quality standards, adhering to established processes and procedures. Identify and locate reference points, parts, and assemblies using established lines or index points, deriving measurements from drawings, prints, and work orders. Execute pre-sequenced tasks, including rework, repairs, functional checks, and authorized modifications, while maintaining the required skill level. Select appropriate parts, materials, tools, and assemblies, determining the sequence of work as necessary. Report job-related issues, such as errors in parts or assembly procedures, in accordance with shop procedures as outlined by the supervisor. Utilize precision measuring instruments to ensure accuracy in work assignments. Perform fabrication tasks, including reaming, drilling, riveting, sanding, filing, grinding, and shaping of sheet metal parts, as well as forming, countersinking, crimping, and bending. Prepare and mix adhesives, cements, and foams for bonding, sealing, and riveting detail parts and components. Load, unload, and operate ovens for sealing or bonding detail parts to assemblies. Apply protective materials to assemblies to ensure durability and compliance with specifications. Assemble and install mechanical accessories such as latches, locks, and pulleys. Work with various materials, including plastics, extrusions, castings, and forgings, during assembly operations. Route, clamp, and secure electrical installation components as required. Coordinate and manage the movement of materials within the assigned area to ensure efficient workflow. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 1+ years of experience using tools and/or hand-held power tools. 1+ years of experience in handling chemicals and hazardous materials. 1+ years of experience with electrical assembly installation. Ability to recognize colors. Proficiency in reading, writing, and speaking English. Ability to lift 35 pounds. Preferred Qualifications: 1+ years of experience as an Electrician or Apprentice. Completion of an electrical trade school program or have military related electrical experience. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This posting might be supporting various shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Feb. 10, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer students and recent graduates of certified Boeing Pre-Employment Training (BPET) programs opportunities to join our Join and Installation team in Everett and Renton, Washington as an Electrical Systems - Assembler Installer. We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Eligibility: This position is exclusively open to students who have completed Boeing Pre-Employment Training (BPET) certified courses. Application Instructions: To apply, please ensure you include BOTH of the following documents in the "Resume / CV" field. You may upload multiple documents in this section: BPET Enrollment Confirmation Form: This form must be issued by your instructor. Updated Resume: Your resume should provide a comprehensive overview of your hands-on tool experience and/or manufacturing skill sets. Position Responsibilities: Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements. Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources. Conduct continuity checks to ensure proper functionality of electrical systems. Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks. Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced. Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments. Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor. Perform hand forming of electrical wiring and soldering as required to complete work assignments. Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments. Execute necessary riveting tasks as part of the assembly process. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: Be a student or recent graduate of a Boeing Pre-Employment Training course that is certified for the 30104 Electrical Systems-Assembler Installer role. Ability to recognize colors. Ability to work in confined spaces. Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance. Proficiency in reading, writing, and speaking English. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 19, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Time Type: Full time Remote Type: Job Family Group: Market Operations Job Description Summary: The Maintenance Technician will primarily ensure the reliable operation of the conveyor system. This role will maintain, troubleshoot, and repair operation of conveyor system and all other mechanical items on the property. Job Description: Conveyor Experience Required Schedule: Monday - Thursday 6 pm - 4:30 pm Job Responsibilities: Responsible for identifying issues with equipment and coordinating and performing necessary maintenance. Applies knowledge of mechanical, electrical and pneumatic systems, maintains and repairs a variety of distribution and facilities equipment - including, but not limited to, conveyor systems, AS/RS systems, cranes, variable frequency drives, gearboxes, and belts Maintains the operation of electrical systems and equipment by completing preventative maintenance requirements on conveyors, programmable controllers, transformers, and machinery wiring; following electrical code, manuals, schematic diagrams, blueprints, and other specifications; troubleshooting. Repairs electrical and mechanical systems and equipment by diagnosing malfunctioning apparatus, such as transformers, motors, and lighting fixtures; determines faulty wiring; inspecting and testing malfunctioning machinery. Performs routine maintenance by using hand and power tools, electric meters, and materials handling equipment in performing duties. Coordinates and/or performs general building maintenance. Maintains and repairs general facilities maintenance to include plumbing, painting, lighting, and other building maintenance to ensure buildings are maintained in working order. Sets specifications for new equipment. Installs new machines and equipment by installing power supply wiring and conduit to and between machines and equipment; using hand tools and test equipment. Other duties, as assigned by the jobholder's supervisor, may also be required. Minimum Qualifications: High School Diploma or GED Minimum of 3-5 years of experience in building maintenance Comfortable with working in high or precarious places Comfortable working in extreme heat and around moving mechanical parts Must be a results-oriented professional with verbal/written communication skills using diplomacy and discretion as well as customer service skills Ability to multi-task, work independently and/or within a team, pay attention to detail and meet deadlines Utilize sound judgement and problem-solving skills Preferred Qualifications: Bachelor's degree in related field and/or equivalent training and work experience Certified Maintenance and Reliability Technician certification Physical Requirements: While performing the duties of this job, the employee is regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone Working up to 25 feet in the air on a scissor lift Working in extreme heat Competencies: Accountable for results which impact the department. Selects best option from a set of defined procedures/ solutions using common sense and experience of similar situations. This job description is only a summary of the typical functions of this position, not an exhaustive or comprehensive list of all possible job responsibilities, tasks and duties. Responsibilities, tasks, and duties of individual jobholders may vary from the above description. - Breakthru Beverage Group is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, genetic information and other legally protected characteristics. The EEO is the Law poster is available here . If you need a reasonable accommodation because of a disability for any part of the employment process, please call and let us know the nature of your request and your contact information.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer students and recent graduates of certified Boeing Pre-Employment Training (BPET) programs opportunities to join our Join and Installation team in Everett and Renton, Washington as an Electrical Systems - Assembler Installer. We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Eligibility: This position is exclusively open to students who have completed Boeing Pre-Employment Training (BPET) certified courses. Application Instructions: To apply, please ensure you include BOTH of the following documents in the "Resume / CV" field. You may upload multiple documents in this section: BPET Enrollment Confirmation Form: This form must be issued by your instructor. Updated Resume: Your resume should provide a comprehensive overview of your hands-on tool experience and/or manufacturing skill sets. Position Responsibilities: Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements. Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources. Conduct continuity checks to ensure proper functionality of electrical systems. Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks. Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced. Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments. Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor. Perform hand forming of electrical wiring and soldering as required to complete work assignments. Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments. Execute necessary riveting tasks as part of the assembly process. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: Be a student or recent graduate of a Boeing Pre-Employment Training course that is certified for the 30104 Electrical Systems-Assembler Installer role. Ability to recognize colors. Ability to work in confined spaces. Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance. Proficiency in reading, writing, and speaking English. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Mar. 19, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Wire Assembler- Repair to join our Electrical Assembly team in Everett, Washington. As a Wire Assembler- Repair, you will play a crucial part in the assembly and fabrication of high-precision components, ensuring that each product meets our quality standards. Your commitment to safety and attention to detail will be essential as you work with a variety of materials and tools, contributing to the creation of innovative solutions that drive our success. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble, join, mechanically fasten, or rework parts and assemblies to create subassemblies that meet quality standards, adhering to established processes and procedures. Identify and locate reference points, parts, and assemblies using established lines or index points, deriving measurements from drawings, prints, and work orders. Execute pre-sequenced tasks, including rework, repairs, functional checks, and authorized modifications, while maintaining the required skill level. Select appropriate parts, materials, tools, and assemblies, determining the sequence of work as necessary. Report job-related issues, such as errors in parts or assembly procedures, in accordance with shop procedures as outlined by the supervisor. Utilize precision measuring instruments to ensure accuracy in work assignments. Perform fabrication tasks, including reaming, drilling, riveting, sanding, filing, grinding, and shaping of sheet metal parts, as well as forming, countersinking, crimping, and bending. Prepare and mix adhesives, cements, and foams for bonding, sealing, and riveting detail parts and components. Load, unload, and operate ovens for sealing or bonding detail parts to assemblies. Apply protective materials to assemblies to ensure durability and compliance with specifications. Assemble and install mechanical accessories such as latches, locks, and pulleys. Work with various materials, including plastics, extrusions, castings, and forgings, during assembly operations. Route, clamp, and secure electrical installation components as required. Coordinate and manage the movement of materials within the assigned area to ensure efficient workflow. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 1+ years of experience using tools and/or hand-held power tools. 1+ years of experience in handling chemicals and hazardous materials. 1+ years of experience with electrical assembly installation. Ability to recognize colors. Proficiency in reading, writing, and speaking English. Ability to lift 35 pounds. Preferred Qualifications: 1+ years of experience as an Electrician or Apprentice. Completion of an electrical trade school program or have military related electrical experience. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This posting might be supporting various shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Feb. 10, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.