TITLE: Shift Leader (SL) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details
07/27/2026
Full time
TITLE: Shift Leader (SL) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details
At Buchheit Logistics, we stand committed, as a team, to ensure that our customers are happy, and that their products are safely delivered to their intended destination on time, as promised. That's why we have the highest standards, the latest technology, and the best people in the industry. We've been in business for over 90 years and are successful because we believe in our company values and truly care about our team members. Buchheit Logistics is searching for a Fleet Technician to be a part of our commitment and a part of our journey. Here at Buchheit, it's a family atmosphere. As a Fleet Mechanic, you will assist in keeping that commitment by ensuring that the Company's fleet is maintained and road ready. Buchheit Logistics equipment is among the top in the industry in quality and maintenance records. We are an industry leader in providing the best equipment for our drivers. Maintaining this fleet requires the best support crew. If you are looking for a challenging and rewarding career working on the latest and greatest equipment, then Buchheit Logistics is a good place to be. To join our award-winning team; have a Class E or CDL License, fleet maintenance background, your own basic tools and a desire to be successful. Buchheit Logistics offers a very competitive pay and benefit package (based on experience), steady year-round work, paid time off, paid holidays, 401k with company match, Buchheit Retail store discounts and much more. For technicians, we also offer: An excellent boot program. Tool allowance upon completion of probation period. Bonuses for clean DOT inspections on company equipment. A Level 2 Technician is expected to be qualified to: Perform DOT inspections and scheduled maintenance without supervision. Perform tire services following industry and OSHA regulations. Service brake, suspension, and air systems. Service and repair electrical systems and components. Experience with hopper and dump trailers and tarp systems strongly preferred. Basic welding and fabrication experience. This position requires 3 to 5 years of experience with diesel tractor systems, or a combination of formal training and experience. Qualifications: Must be able to work a Saturday rotation Class A or B CDL License preferred. Able to communicate issues and understand job assignments. Able to prioritize work assignments. Physical Requirements: Able to stand, stoop, bend, and crouch on a regular basis or for long periods of time. Able to climb staircases. Able to lift up to 75 pounds. Able to perform all essential job functions Other: The successful candidate is subject to a pre-employment drug test, WorkSTEPS and background check. Buchheit Logistics is an equal opportunity employer. PI8bd42e6b39da-8008
07/27/2026
Full time
At Buchheit Logistics, we stand committed, as a team, to ensure that our customers are happy, and that their products are safely delivered to their intended destination on time, as promised. That's why we have the highest standards, the latest technology, and the best people in the industry. We've been in business for over 90 years and are successful because we believe in our company values and truly care about our team members. Buchheit Logistics is searching for a Fleet Technician to be a part of our commitment and a part of our journey. Here at Buchheit, it's a family atmosphere. As a Fleet Mechanic, you will assist in keeping that commitment by ensuring that the Company's fleet is maintained and road ready. Buchheit Logistics equipment is among the top in the industry in quality and maintenance records. We are an industry leader in providing the best equipment for our drivers. Maintaining this fleet requires the best support crew. If you are looking for a challenging and rewarding career working on the latest and greatest equipment, then Buchheit Logistics is a good place to be. To join our award-winning team; have a Class E or CDL License, fleet maintenance background, your own basic tools and a desire to be successful. Buchheit Logistics offers a very competitive pay and benefit package (based on experience), steady year-round work, paid time off, paid holidays, 401k with company match, Buchheit Retail store discounts and much more. For technicians, we also offer: An excellent boot program. Tool allowance upon completion of probation period. Bonuses for clean DOT inspections on company equipment. A Level 2 Technician is expected to be qualified to: Perform DOT inspections and scheduled maintenance without supervision. Perform tire services following industry and OSHA regulations. Service brake, suspension, and air systems. Service and repair electrical systems and components. Experience with hopper and dump trailers and tarp systems strongly preferred. Basic welding and fabrication experience. This position requires 3 to 5 years of experience with diesel tractor systems, or a combination of formal training and experience. Qualifications: Must be able to work a Saturday rotation Class A or B CDL License preferred. Able to communicate issues and understand job assignments. Able to prioritize work assignments. Physical Requirements: Able to stand, stoop, bend, and crouch on a regular basis or for long periods of time. Able to climb staircases. Able to lift up to 75 pounds. Able to perform all essential job functions Other: The successful candidate is subject to a pre-employment drug test, WorkSTEPS and background check. Buchheit Logistics is an equal opportunity employer. PI8bd42e6b39da-8008
Peckham Industries Laborer (Paving/Milling) Please wait while the page is processing chevron_left Back to Job Postings Laborer (Paving/Milling) Apply Now Share via Email Print Position Title: Laborer (Paving/Milling) Date Posted: 05/15/2026 Location: North Kingstown, RI Job Category: Easy Apply Salary Interval: Seasonal Pay Range: $38.65 - $38.65 Application Instructions About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our family by choice ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the companys construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Position Description Job Summary: The Laborer will be responsible for assisting with the preparation, installation, and maintenance of asphalt. This individual will work alongside skilled workers and operators to ensure efficient, high-quality, and safe completion of paving projects. Essential Functions: Protect family and friends. Maintain a zero-incident safety environment by consistently applying safe work practices, properly operating tools and equipment, and proactively communicating hazards to prevent injuries. Results matter. Ensure job site readiness and efficient material flow by clearing debris, marking work areas, and staging materials to support uninterrupted workflow and crew productivity. Committed to serve. Support efficient paving operations by utilizing hand and power tools to assist in asphalt placement and collaborating with equipment operators to maintain steady production and proper material application. Our word is our bond. Deliver quality surface preparation and installation by accurately spreading, leveling, and compacting paving materials, and assisting with pavement removal and subgrade preparation to meet project specifications. Safety always wins. Protect team members and the public by adhering to all safety protocols, consistently using required PPE, and maintaining awareness of surroundings while working around equipment and crews. Dedication. Maintain tools, equipment, and job site standards by performing routine cleaning, maintenance, and organization to support operational efficiency and extend equipment life. Respect and engage. Contribute to on-time, high-quality project delivery by following direction, communicating effectively with team members, and executing assigned tasks to meet deadlines and performance expectations. Position Requirements Requirements, Education and Experience: Ability to work flexible schedules including days, nights, weekends, and overtime as needed. High School Diploma or GED preferred. Previous paving or construction experience preferred but not required. Basic knowledge of construction tools and equipment. Demonstrated strong work ethic and commitment to safety. Ability to follow instructions, work collaboratively, and contribute to team success. Valid drivers license and reliable transportation. Must be authorized to work in the United States. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require up to 100% travel by personal vehicle to project locations throughout the state of Rhode Island and New England based on the needs of the business. Work Environment/Physical Demands: This position works both indoors and outdoors in various weather conditions. It involves heavy physical work, including moving objects weighing up to 100 pounds or more. The role requires working on or near moving mechanical parts and loud equipment. Employees must be able to sit or stand for extended periods and perform physical activities such as lifting, bending, kneeling, squatting, climbing, walking, reaching, driving, and repetitive motions. Work is performed on active construction sites near moving mechanical parts and loud equipment. The role requires good hand-eye coordination, manual dexterity, and the ability to maintain awareness and balance on uneven terrain. Employees must be able to communicate effectively in noisy environments and wear required personal protective equipment (PPE) Equal Opportunity Employer Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact . Please wait Compensation details: 38.65-38.65 Hourly Wage PI34ed7735af54-7822
07/27/2026
Full time
Peckham Industries Laborer (Paving/Milling) Please wait while the page is processing chevron_left Back to Job Postings Laborer (Paving/Milling) Apply Now Share via Email Print Position Title: Laborer (Paving/Milling) Date Posted: 05/15/2026 Location: North Kingstown, RI Job Category: Easy Apply Salary Interval: Seasonal Pay Range: $38.65 - $38.65 Application Instructions About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our family by choice ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the companys construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Position Description Job Summary: The Laborer will be responsible for assisting with the preparation, installation, and maintenance of asphalt. This individual will work alongside skilled workers and operators to ensure efficient, high-quality, and safe completion of paving projects. Essential Functions: Protect family and friends. Maintain a zero-incident safety environment by consistently applying safe work practices, properly operating tools and equipment, and proactively communicating hazards to prevent injuries. Results matter. Ensure job site readiness and efficient material flow by clearing debris, marking work areas, and staging materials to support uninterrupted workflow and crew productivity. Committed to serve. Support efficient paving operations by utilizing hand and power tools to assist in asphalt placement and collaborating with equipment operators to maintain steady production and proper material application. Our word is our bond. Deliver quality surface preparation and installation by accurately spreading, leveling, and compacting paving materials, and assisting with pavement removal and subgrade preparation to meet project specifications. Safety always wins. Protect team members and the public by adhering to all safety protocols, consistently using required PPE, and maintaining awareness of surroundings while working around equipment and crews. Dedication. Maintain tools, equipment, and job site standards by performing routine cleaning, maintenance, and organization to support operational efficiency and extend equipment life. Respect and engage. Contribute to on-time, high-quality project delivery by following direction, communicating effectively with team members, and executing assigned tasks to meet deadlines and performance expectations. Position Requirements Requirements, Education and Experience: Ability to work flexible schedules including days, nights, weekends, and overtime as needed. High School Diploma or GED preferred. Previous paving or construction experience preferred but not required. Basic knowledge of construction tools and equipment. Demonstrated strong work ethic and commitment to safety. Ability to follow instructions, work collaboratively, and contribute to team success. Valid drivers license and reliable transportation. Must be authorized to work in the United States. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require up to 100% travel by personal vehicle to project locations throughout the state of Rhode Island and New England based on the needs of the business. Work Environment/Physical Demands: This position works both indoors and outdoors in various weather conditions. It involves heavy physical work, including moving objects weighing up to 100 pounds or more. The role requires working on or near moving mechanical parts and loud equipment. Employees must be able to sit or stand for extended periods and perform physical activities such as lifting, bending, kneeling, squatting, climbing, walking, reaching, driving, and repetitive motions. Work is performed on active construction sites near moving mechanical parts and loud equipment. The role requires good hand-eye coordination, manual dexterity, and the ability to maintain awareness and balance on uneven terrain. Employees must be able to communicate effectively in noisy environments and wear required personal protective equipment (PPE) Equal Opportunity Employer Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact . Please wait Compensation details: 38.65-38.65 Hourly Wage PI34ed7735af54-7822
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Embedded Software Engineer Job Code: 39159 Job Location: Rochester, NY Job Schedule: 9/80 Job Description: L3Harris Space and Mission Systems are seeking a Space Software Engineer to develop software for Specialized Test Equipment (STE), Electrical Ground Support Equipment (EGSE), and embedded real-time systems supporting complex space-based payloads and subsystem integration. This role is centered on software development for ground and lab environments that interface with flight-like hardware, while also contributing to embedded software design and implementation for real-time control, command and telemetry handling, and subsystem integration. Essential Functions: Lead the design, development, and implementation of software for STE and EGSE used to command, monitor, configure, and support integration of space-based payloads and embedded subsystems. Develop application software, control software, service utilities, and scripted workflows used in lab, integration, and qualification environments. Design and implement embedded real-time software for subsystem control, device interfaces, telemetry processing, command handling, and hardware/software integration. Develop software that interfaces with lab instrumentation, processors, controllers, and custom electronics in support of checkout, diagnostics, and engineering use cases. Define software architecture, requirements allocation, interface behavior, and design artifacts for both ground-support and embedded software components. Collaborate with systems, electrical, mechanical, and test engineers to integrate payloads, controllers, sensors, and support equipment into cohesive operational workflows. Support software bring-up, hardware integration, low-level debugging, root cause analysis, and issue resolution across embedded and support-equipment environments. Contribute to software documentation, code reviews, development process execution, and technical planning for cost, schedule, and scope. Lead small technical teams and provide guidance on software implementation, reuse, maintainability, and lifecycle execution. Support transition from development through integration, verification, and mission or production readiness activities. Qualifications: Bachelor's Degree in Computer Engineering, Computer Science, Electrical Engineering, or related field and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Experience developing software for aerospace, space, avionics, or other complex embedded systems. Experience developing STE, EGSE, bench, or lab support software used to control hardware, automate engineering tasks, or interface with electronics and instrumentation. Experience in embedded software development using C/C++ and scripting languages such as Python for integration, control, or automation tasks. Experience with real-time operating systems such as VxWorks, FreeRTOS, RTLinux, QNX, or similar real-time platforms. Experience integrating and debugging software at the hardware/software boundary. Experience with communication and control interfaces such as SpaceWire, MIL-STD-1553, RS-422, Ethernet, CAN, UART, SPI, I2C, or similar protocols. Experience developing scripted command, control, or checkout sequences for subsystems, support equipment, or integration environments. Ability to obtain a U.S. Security Clearance. Preferred Additional Skills: Ability to read and interpret engineering drawings, interface documents, and electrical schematics. Familiarity with STIG and Cyber hardening procedures. Knowledge of the space domain, including payload integration, command and telemetry flows, mission operations concepts, or space vehicle development environments. Experience with command and control software, embedded controllers, processor-based electronics, or subsystem management applications. Familiarity with motors, servo controllers, shutters, gimbals, actuators, focus mechanisms, and related electromechanical devices. Experience with imaging payloads, visible cameras, IR detectors, optical systems, or sensor processing applications. Experience developing software for microcontrollers, board support packages, device drivers, or low-level hardware interfaces. Familiarity with MATLAB/Simulink, LabVIEW, COSMOS, or similar engineering and integration toolchains. Experience with DevOps and configuration management tools such as Git, Bitbucket, Jenkins, Jira, and Confluence. Experience supporting integration, verification, qualification, or environmental test campaigns in aerospace or defense environments. Familiarity with open architecture standards, model-based systems engineering tools, or secure software development practices. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $111,500 - $207,500. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $97,000 - $180,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
07/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Embedded Software Engineer Job Code: 39159 Job Location: Rochester, NY Job Schedule: 9/80 Job Description: L3Harris Space and Mission Systems are seeking a Space Software Engineer to develop software for Specialized Test Equipment (STE), Electrical Ground Support Equipment (EGSE), and embedded real-time systems supporting complex space-based payloads and subsystem integration. This role is centered on software development for ground and lab environments that interface with flight-like hardware, while also contributing to embedded software design and implementation for real-time control, command and telemetry handling, and subsystem integration. Essential Functions: Lead the design, development, and implementation of software for STE and EGSE used to command, monitor, configure, and support integration of space-based payloads and embedded subsystems. Develop application software, control software, service utilities, and scripted workflows used in lab, integration, and qualification environments. Design and implement embedded real-time software for subsystem control, device interfaces, telemetry processing, command handling, and hardware/software integration. Develop software that interfaces with lab instrumentation, processors, controllers, and custom electronics in support of checkout, diagnostics, and engineering use cases. Define software architecture, requirements allocation, interface behavior, and design artifacts for both ground-support and embedded software components. Collaborate with systems, electrical, mechanical, and test engineers to integrate payloads, controllers, sensors, and support equipment into cohesive operational workflows. Support software bring-up, hardware integration, low-level debugging, root cause analysis, and issue resolution across embedded and support-equipment environments. Contribute to software documentation, code reviews, development process execution, and technical planning for cost, schedule, and scope. Lead small technical teams and provide guidance on software implementation, reuse, maintainability, and lifecycle execution. Support transition from development through integration, verification, and mission or production readiness activities. Qualifications: Bachelor's Degree in Computer Engineering, Computer Science, Electrical Engineering, or related field and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Experience developing software for aerospace, space, avionics, or other complex embedded systems. Experience developing STE, EGSE, bench, or lab support software used to control hardware, automate engineering tasks, or interface with electronics and instrumentation. Experience in embedded software development using C/C++ and scripting languages such as Python for integration, control, or automation tasks. Experience with real-time operating systems such as VxWorks, FreeRTOS, RTLinux, QNX, or similar real-time platforms. Experience integrating and debugging software at the hardware/software boundary. Experience with communication and control interfaces such as SpaceWire, MIL-STD-1553, RS-422, Ethernet, CAN, UART, SPI, I2C, or similar protocols. Experience developing scripted command, control, or checkout sequences for subsystems, support equipment, or integration environments. Ability to obtain a U.S. Security Clearance. Preferred Additional Skills: Ability to read and interpret engineering drawings, interface documents, and electrical schematics. Familiarity with STIG and Cyber hardening procedures. Knowledge of the space domain, including payload integration, command and telemetry flows, mission operations concepts, or space vehicle development environments. Experience with command and control software, embedded controllers, processor-based electronics, or subsystem management applications. Familiarity with motors, servo controllers, shutters, gimbals, actuators, focus mechanisms, and related electromechanical devices. Experience with imaging payloads, visible cameras, IR detectors, optical systems, or sensor processing applications. Experience developing software for microcontrollers, board support packages, device drivers, or low-level hardware interfaces. Familiarity with MATLAB/Simulink, LabVIEW, COSMOS, or similar engineering and integration toolchains. Experience with DevOps and configuration management tools such as Git, Bitbucket, Jenkins, Jira, and Confluence. Experience supporting integration, verification, qualification, or environmental test campaigns in aerospace or defense environments. Familiarity with open architecture standards, model-based systems engineering tools, or secure software development practices. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $111,500 - $207,500. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $97,000 - $180,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Additional Information Job Number Job CategoryLandscaping & Grounds Location2365 Kaanapali Pkwy, Lahaina, Hawaii, United States, 96761 VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $23.99-$23.99 per hour POSITION SUMMARY Monitor property grounds to ensure a pleasant appearance. Maintain the appearance of fountains, planters, or other grounds features by cleaning, replacing or making repairs. Install new flowers, bulbs, grass, trees, and shrubs. Maintain flower beds, baskets, and boxes by watering, removing weeds, trimming, and performing other maintenance. Replace and transplant trees, flowers, and shrubs. Maintain trees and shrubs by trimming and pruning. Trim and edge grass in areas that mowers cannot reach. Maintain lawns by mowing, edging, raking leaves, and performing other lawn maintenance. Install, maintain, and operate irrigation systems. Remove and bag trash from all exterior trash cans. Operate dump trucks, tractors, trucks, or utility vehicles to transport equipment, supplies, materials, and debris. Wash, clean, and re-fuel all equipment after use. Follow all company and safety and security policies and procedures; report defective equipment, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; protect company assets. Support team to reach common goals. Ensure adherence to quality expectations and standards. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move over sloping, uneven, or slippery surfaces as well as up and down ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Removal of snow and maintenance of ice management (if applicable). Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Perform other reasonable job duties as requested by Supervisors. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver's License At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand's unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
07/27/2026
Full time
Additional Information Job Number Job CategoryLandscaping & Grounds Location2365 Kaanapali Pkwy, Lahaina, Hawaii, United States, 96761 VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $23.99-$23.99 per hour POSITION SUMMARY Monitor property grounds to ensure a pleasant appearance. Maintain the appearance of fountains, planters, or other grounds features by cleaning, replacing or making repairs. Install new flowers, bulbs, grass, trees, and shrubs. Maintain flower beds, baskets, and boxes by watering, removing weeds, trimming, and performing other maintenance. Replace and transplant trees, flowers, and shrubs. Maintain trees and shrubs by trimming and pruning. Trim and edge grass in areas that mowers cannot reach. Maintain lawns by mowing, edging, raking leaves, and performing other lawn maintenance. Install, maintain, and operate irrigation systems. Remove and bag trash from all exterior trash cans. Operate dump trucks, tractors, trucks, or utility vehicles to transport equipment, supplies, materials, and debris. Wash, clean, and re-fuel all equipment after use. Follow all company and safety and security policies and procedures; report defective equipment, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; protect company assets. Support team to reach common goals. Ensure adherence to quality expectations and standards. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move over sloping, uneven, or slippery surfaces as well as up and down ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Removal of snow and maintenance of ice management (if applicable). Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Perform other reasonable job duties as requested by Supervisors. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver's License At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand's unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
TITLE: Shift Manager (SM) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a full time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details
07/27/2026
Full time
TITLE: Shift Manager (SM) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a full time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details
Find your calling at Mercy! This is an entry-level position requiring basic knowledge of boiler, HVAC, refrigeration, control system maintenance and operation, plumbing, electricity, carpentry, and painting. It is recommended that incumbents attend one or two years of trade school to prepare them for advancement opportunities. The Facility Systems Technician I position will allow the incumbent to learn operations for HVAC, refrigeration systems, plumbing, electricity, work practices, safety procedures, and become familiar with the respective equipment regulatory requirements. This position will also provide an opportunity to learn proper use of basic tools and equipment necessary to maintain and troubleshoot HVAC and refrigeration systems. This position will support small and mid-size hospitals, critical access hospitals, small inpatient/outpatient facilities, and clinics. The Facility Systems Technician provides the necessary skill to operate, maintain, and repair various electrical/plumbing systems, movable equipment, physical plant equipment, furniture, walls, ceilings, and floors. Utilizes exceptional customer service and communication skills. The purpose of this position is to ensure a safe working environment and support an exceptional Environment of Care for Mercy. Position Details: This is a full time position at Mercy Aurora Benefit Eligible Hours: 7:30a-4p Licensure: - Valid Drivers License for all Mercy locations - Mercy Arkansas Hospitals require High Pressure Boiler Operators License administered by Arkansas Dept. of Labor and Licensing where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma City where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma Dept. of Labor where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Class C Tank Operator Training and Certification required for all Mercy locations. Must achieve certification within 90 days of employment. - Fire door maintenance training program with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. - UL fire stop training with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. Experience: This is an entry-level position with a preference of 1 or more years commercial experience working with any of the following equipment: HVAC, boilers, and refrigeration equipment. Other Skills and Knowledge: - Requires oral and written communication skills to communicate with customers and follow instructions. - Verbal ability required to read and understand technical manuals. - Numerical ability required to make calculations for testing, installation, measurement, estimation and repair of equipment. - Ability to prioritize work assignments, conceptualize and formulate finished product. - Form perception is required when measuring and installing parts and equipment. - Spatial ability required to understand forms and relationships when working from blueprints or specifications. - Requires knowledge and use of various computer software such as Outlook, TMS and/or Nuvolo. - Ability to manage time and materials efficiently. Completes work assignments in a high-quality manner and the lowest cost to Mercy. - Requires exceptional customer service skills and ability to achieve department goals. - Incumbent must achieve favorable results on both oral and written competency exam prior to advancing to Facility Systems Technician II. - Requires general manual dexterity, basic math knowledge, and mechanical aptitude. - Exposure to extreme temperatures, electric shock, and loud noise. Preferred Qualifications Education: High school diploma or equivalent preferred. 2 or more years of training in a Technical or Vocational School. Licensure: Boiler, HVAC, or Refrigeration. Electrical and/or Plumbing. Experience: 1 or more years working as a maintenance technician in a healthcare, educational, or industrial setting. Certification/Registration: EPA approved Universal Certification for handling Refrigerants Must be trained to NFPA 80 regulations for fire door inspection and maintenance. Must be trained to UL standards for fire stopping. ASSE 6040 training for medical gas maintenance Other Skills and Knowledge: Why Mercy? From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period. Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
07/27/2026
Full time
Find your calling at Mercy! This is an entry-level position requiring basic knowledge of boiler, HVAC, refrigeration, control system maintenance and operation, plumbing, electricity, carpentry, and painting. It is recommended that incumbents attend one or two years of trade school to prepare them for advancement opportunities. The Facility Systems Technician I position will allow the incumbent to learn operations for HVAC, refrigeration systems, plumbing, electricity, work practices, safety procedures, and become familiar with the respective equipment regulatory requirements. This position will also provide an opportunity to learn proper use of basic tools and equipment necessary to maintain and troubleshoot HVAC and refrigeration systems. This position will support small and mid-size hospitals, critical access hospitals, small inpatient/outpatient facilities, and clinics. The Facility Systems Technician provides the necessary skill to operate, maintain, and repair various electrical/plumbing systems, movable equipment, physical plant equipment, furniture, walls, ceilings, and floors. Utilizes exceptional customer service and communication skills. The purpose of this position is to ensure a safe working environment and support an exceptional Environment of Care for Mercy. Position Details: This is a full time position at Mercy Aurora Benefit Eligible Hours: 7:30a-4p Licensure: - Valid Drivers License for all Mercy locations - Mercy Arkansas Hospitals require High Pressure Boiler Operators License administered by Arkansas Dept. of Labor and Licensing where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma City where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma Dept. of Labor where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Class C Tank Operator Training and Certification required for all Mercy locations. Must achieve certification within 90 days of employment. - Fire door maintenance training program with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. - UL fire stop training with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. Experience: This is an entry-level position with a preference of 1 or more years commercial experience working with any of the following equipment: HVAC, boilers, and refrigeration equipment. Other Skills and Knowledge: - Requires oral and written communication skills to communicate with customers and follow instructions. - Verbal ability required to read and understand technical manuals. - Numerical ability required to make calculations for testing, installation, measurement, estimation and repair of equipment. - Ability to prioritize work assignments, conceptualize and formulate finished product. - Form perception is required when measuring and installing parts and equipment. - Spatial ability required to understand forms and relationships when working from blueprints or specifications. - Requires knowledge and use of various computer software such as Outlook, TMS and/or Nuvolo. - Ability to manage time and materials efficiently. Completes work assignments in a high-quality manner and the lowest cost to Mercy. - Requires exceptional customer service skills and ability to achieve department goals. - Incumbent must achieve favorable results on both oral and written competency exam prior to advancing to Facility Systems Technician II. - Requires general manual dexterity, basic math knowledge, and mechanical aptitude. - Exposure to extreme temperatures, electric shock, and loud noise. Preferred Qualifications Education: High school diploma or equivalent preferred. 2 or more years of training in a Technical or Vocational School. Licensure: Boiler, HVAC, or Refrigeration. Electrical and/or Plumbing. Experience: 1 or more years working as a maintenance technician in a healthcare, educational, or industrial setting. Certification/Registration: EPA approved Universal Certification for handling Refrigerants Must be trained to NFPA 80 regulations for fire door inspection and maintenance. Must be trained to UL standards for fire stopping. ASSE 6040 training for medical gas maintenance Other Skills and Knowledge: Why Mercy? From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period. Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
Additional Information Job Number Job CategoryEngineering & Facilities Location2365 Kaanapali Pkwy, Lahaina, Hawaii, United States, 96761 VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $33.11-$33.11 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand's unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
07/27/2026
Full time
Additional Information Job Number Job CategoryEngineering & Facilities Location2365 Kaanapali Pkwy, Lahaina, Hawaii, United States, 96761 VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $33.11-$33.11 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand's unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
SIGN ON BONUS : UPTO $7,000 Pay Rate: $32.00 - $40.00 per hour, Overtime available . Shift Available: 10:00 AM - 6:00 PM . Annual Tool Allowance: Yes, a $700 annual tool allowance is provided. Additional Benefits: Uniforms are provided, Full benefits, Free boots voucher yearly. Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
SIGN ON BONUS : UPTO $7,000 Pay Rate: $32.00 - $40.00 per hour, Overtime available . Shift Available: 10:00 AM - 6:00 PM . Annual Tool Allowance: Yes, a $700 annual tool allowance is provided. Additional Benefits: Uniforms are provided, Full benefits, Free boots voucher yearly. Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Come and join the magic with Aulani, A Disney Resort and Spa! Perks and benefits may include: 100% full coverage of healthcare for you and your eligible dependents Tuition paid upfront at network schools Free lunch Free parking Free theme park admission and much more! Bell person will assist with transporting all luggage to and from guest rooms. During 3rd shift, Cast Member may be required to perform job functions for both roles. Bell and Valet cast members will assist arriving and departing guests with their vehicles, including, but not limited to shuttles, busses and other transportation, and driving all types of guest vehicles. Responsibilities : Bell Services Transport guest luggage including but not limited to Rooms/Vehicles/Storage. Care and Storage of guest property Delivering items to guest rooms, including newspapers, express check-outs, including but not limited to guest deliveries (i.e. flowers, packages/boxes) Excellent communication skills and high guest service expectations Greet Guests with positive, friendly and helpful attitude Proactively address guest needs by answering questions, giving directions and other information regarding the hotel/resort or surrounding areas Works indoors and outdoors in all kinds of weather including extreme temperatures and high humidity Basic Qualifications : Valid Hawaii driver's license and clean driving record (no tickets/accidents/ moving violations in the past 12 months) Ability to drive manual/automatic transmission May be required to work Graveyard shifts if needed Previous experience in a Hotel/Resort environment preferred Previous experience working in a parking facility with type service (airports, business office building, private parking structures Knowledge of Hawaiian/Japanese language preferred Preferred Qualifications: Previous experience in a Hotel/Resort environment Previous experience working in a parking service type facility (i.e. airports, business office building, private parking structures) Bilingual preferred- Knowledge of Hawaiian/Japanese language Previous computer and/or cash handling experience Additional Information : SCHEDULE AVAILABILTY Full Time - Full availability is required seven (7) days per week, including early mornings, late nights, weekends, and holidays. SUBMITTING YOUR APPLICATION After clicking "Apply for this job" below, the employment application will open in a new window. Please complete ALL pages of the application by clicking "Next" on each page, then "Submit" on the final page. The pay rate for this role in Hawaii is $21.66 per hour, plus gratuities. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit:
07/27/2026
Full time
Come and join the magic with Aulani, A Disney Resort and Spa! Perks and benefits may include: 100% full coverage of healthcare for you and your eligible dependents Tuition paid upfront at network schools Free lunch Free parking Free theme park admission and much more! Bell person will assist with transporting all luggage to and from guest rooms. During 3rd shift, Cast Member may be required to perform job functions for both roles. Bell and Valet cast members will assist arriving and departing guests with their vehicles, including, but not limited to shuttles, busses and other transportation, and driving all types of guest vehicles. Responsibilities : Bell Services Transport guest luggage including but not limited to Rooms/Vehicles/Storage. Care and Storage of guest property Delivering items to guest rooms, including newspapers, express check-outs, including but not limited to guest deliveries (i.e. flowers, packages/boxes) Excellent communication skills and high guest service expectations Greet Guests with positive, friendly and helpful attitude Proactively address guest needs by answering questions, giving directions and other information regarding the hotel/resort or surrounding areas Works indoors and outdoors in all kinds of weather including extreme temperatures and high humidity Basic Qualifications : Valid Hawaii driver's license and clean driving record (no tickets/accidents/ moving violations in the past 12 months) Ability to drive manual/automatic transmission May be required to work Graveyard shifts if needed Previous experience in a Hotel/Resort environment preferred Previous experience working in a parking facility with type service (airports, business office building, private parking structures Knowledge of Hawaiian/Japanese language preferred Preferred Qualifications: Previous experience in a Hotel/Resort environment Previous experience working in a parking service type facility (i.e. airports, business office building, private parking structures) Bilingual preferred- Knowledge of Hawaiian/Japanese language Previous computer and/or cash handling experience Additional Information : SCHEDULE AVAILABILTY Full Time - Full availability is required seven (7) days per week, including early mornings, late nights, weekends, and holidays. SUBMITTING YOUR APPLICATION After clicking "Apply for this job" below, the employment application will open in a new window. Please complete ALL pages of the application by clicking "Next" on each page, then "Submit" on the final page. The pay rate for this role in Hawaii is $21.66 per hour, plus gratuities. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit:
REFERRAL BONUS : $500 Pay: $25 - $30 per hour. Overtime is available . Shift Available: Monday - Friday 11:00 AM - 7:30 PM, Occasional weekend work Shift Differential: Yes,$2.00/HR Annual Tool Allowance: Yes Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
REFERRAL BONUS : $500 Pay: $25 - $30 per hour. Overtime is available . Shift Available: Monday - Friday 11:00 AM - 7:30 PM, Occasional weekend work Shift Differential: Yes,$2.00/HR Annual Tool Allowance: Yes Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
SIGN ON BONUS - UPTO $7,000 Pay: $30 - $40per hour (based on experience) Shift Availability: 4/10hr shifts Tuesday - Friday Shift Differential: Yes, $3 per hour $700 annual tool allowance Outstanding benefits package: Full time career opportunity with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
SIGN ON BONUS - UPTO $7,000 Pay: $30 - $40per hour (based on experience) Shift Availability: 4/10hr shifts Tuesday - Friday Shift Differential: Yes, $3 per hour $700 annual tool allowance Outstanding benefits package: Full time career opportunity with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Description: About Us: Active Security designs, develops, implements, and sustains advanced C5ISR and security solutions to enhance defense and mission capabilities, addressing threats across physical, electronic, cyber, and communications security for commercial and U.S. Government clients. Our Electronics Technicians are essential in installing, programming, maintaining, and repairing these complex systems in high-security environments, ensuring compliance with codes, client specifications, and internal standards. With a structured career path, technicians have continuous opportunities for skills development, advancing from foundational technical expertise to leadership roles. Job Summary: As a senior technician, the Lead Security Systems Technician is responsible for independent field operations, technical oversight, and project leadership. This role demands advanced technical expertise, as well as organizational and leadership skills to manage project sites, ensure quality, and oversee field teams. The Lead Security Systems Technician is the key technical liaison between Active Security's project teams and clients. Requirements: Responsibilities: System Installation & Maintenance: Install, configure, and maintain complex security system components and infrastructure with minimal supervision, ensuring that systems function according to design specifications. Project Leadership: Manage site safety, quality, and schedule adherence, ensuring all activities comply with design specifications and authority requirements. Team Oversight & Mentorship: Supervise and mentor teams of up to five junior and intermediate technicians, ensuring training, task completion, and alignment with project goals and standards. Technical Leadership: Perform complex troubleshooting and diagnostics, including advanced programming and system integration tasks, independently and collaboratively resolving complex issues on-site. Customer & Project Coordination: Serve as the primary on-site contact for clients and communicate effectively with project managers, engineers, and other stakeholders. Documentation: Complete required job documentation and ensure compliance with industry and internal standards such as ISO-9001, CMMI II, and DCAA. Qualifications: Education & Skills: Graduate; ability to work in a team environment; completion of at least four industry certifications in electronic security and systems integration. Experience: Minimum of 5 years in electronic security, including systems integration, administration, and advanced troubleshooting, with a focus on compliance and adherence to government and independent standards. Professional Development: Strong commitment to ongoing education in compliance, industry advancements, complex programming, and project management practices. Travel Ability: Ability to travel to projects and stay overnight for varying lengths of time. Physical Demands & Work Environment: The role demands a high level of professionalism, adaptability, and organizational skills. Technicians must handle prolonged tasks, ability to handle up to 50 pounds, ability to work at heights, and work in diverse environments. This role may involve exposure to varying weather conditions and requires adherence to safety protocols. The position requires maintaining company-issued tools, vehicles, and equipment. General Requirements for All Levels: Communication: Strong oral and written skills to interact with peers, supervisors, and clients. Analytical Skills: Detail-oriented, capable of diagnosing and solving problems. Screening Requirements: Candidates must pass a background check, have a valid driver's license, and be eligible for U.S. Government Security Clearance. PI853210d2733e-8271
07/27/2026
Full time
Description: About Us: Active Security designs, develops, implements, and sustains advanced C5ISR and security solutions to enhance defense and mission capabilities, addressing threats across physical, electronic, cyber, and communications security for commercial and U.S. Government clients. Our Electronics Technicians are essential in installing, programming, maintaining, and repairing these complex systems in high-security environments, ensuring compliance with codes, client specifications, and internal standards. With a structured career path, technicians have continuous opportunities for skills development, advancing from foundational technical expertise to leadership roles. Job Summary: As a senior technician, the Lead Security Systems Technician is responsible for independent field operations, technical oversight, and project leadership. This role demands advanced technical expertise, as well as organizational and leadership skills to manage project sites, ensure quality, and oversee field teams. The Lead Security Systems Technician is the key technical liaison between Active Security's project teams and clients. Requirements: Responsibilities: System Installation & Maintenance: Install, configure, and maintain complex security system components and infrastructure with minimal supervision, ensuring that systems function according to design specifications. Project Leadership: Manage site safety, quality, and schedule adherence, ensuring all activities comply with design specifications and authority requirements. Team Oversight & Mentorship: Supervise and mentor teams of up to five junior and intermediate technicians, ensuring training, task completion, and alignment with project goals and standards. Technical Leadership: Perform complex troubleshooting and diagnostics, including advanced programming and system integration tasks, independently and collaboratively resolving complex issues on-site. Customer & Project Coordination: Serve as the primary on-site contact for clients and communicate effectively with project managers, engineers, and other stakeholders. Documentation: Complete required job documentation and ensure compliance with industry and internal standards such as ISO-9001, CMMI II, and DCAA. Qualifications: Education & Skills: Graduate; ability to work in a team environment; completion of at least four industry certifications in electronic security and systems integration. Experience: Minimum of 5 years in electronic security, including systems integration, administration, and advanced troubleshooting, with a focus on compliance and adherence to government and independent standards. Professional Development: Strong commitment to ongoing education in compliance, industry advancements, complex programming, and project management practices. Travel Ability: Ability to travel to projects and stay overnight for varying lengths of time. Physical Demands & Work Environment: The role demands a high level of professionalism, adaptability, and organizational skills. Technicians must handle prolonged tasks, ability to handle up to 50 pounds, ability to work at heights, and work in diverse environments. This role may involve exposure to varying weather conditions and requires adherence to safety protocols. The position requires maintaining company-issued tools, vehicles, and equipment. General Requirements for All Levels: Communication: Strong oral and written skills to interact with peers, supervisors, and clients. Analytical Skills: Detail-oriented, capable of diagnosing and solving problems. Screening Requirements: Candidates must pass a background check, have a valid driver's license, and be eligible for U.S. Government Security Clearance. PI853210d2733e-8271
Loyola University Maryland Main Campus Full time R- Position Title Police Officer III S3 Work Shift Evening (4pm-12am) (United States of America) Employee Type Regular Office/Department Public Safety Work Environment Remote and hybrid positions are open to applicants based in states identified here : Work at Loyola Loyola University Maryland . Loyola University Maryland Main Campus Position Duties The Police Office position is an experienced law enforcement officer position. Campus police officers are responsible for providing highly visible patrols on and around the University campus, responding to calls for services, and identifying problem areas and situations. Campus police officers report to the Shift Supervisor (Sergeant) on their respective shifts.Essential Functions Patrol campus and the surrounding areas, respond to calls for service, back-up officers, identify and report hazards and suspicious activities. Patrol the campus being highly visible and alert for safety and security hazards, suspicious activities and intruders. Respond to alarms. Respond to all calls for campus police services. Render services as per departmental procedure. Secure buildings, offices, classrooms, and other areas per procedures. Reported incidents are investigated. Incidents are investigated thoroughly and completely with detailed information provided in a written report. Resources are sought to facilitate a logical solution/conclusion to the problem. Seeks solutions to situations and incidents.Provide assistance to the sick and injured as per the procedures identified by the National Safety Council. Identify situations requiring medical assistance. Rendering aid as CPR and First Aid certification. Utilize AED's and other issued equipments as per procedures. Provide escorts for sick or injured students, faculty and staff. Provide instructions to the Loyola community during emergencies, routine events and upon request. Makes arrests and/or transports arrestees to central booking. Appears in court to present evidence and/or testify as required.Articulate information about the University, the Department of Public Safety (procedures and programs) and provide written details about incidents and events. Articulate accurate information about the University. Write complete, accurate, and comprehensible details about incidents and events as require by departmental procedure.Assist in controlling traffic, parking enforcement and vehicle assists; contain and control crowds, provide safe environment during large events. Control traffic as directed. Enforce all parking rules and regulations. Assist motorist with vehicle problems. Contain and control crowds in order to preserve peace and maintain a safe environment.Non essential: Performs all other duties and responsibilities as assigned or directed by the supervisor. This may include attendance of and participation in required training for role. Physical/Environmental Demands Specific physical requirements or environmental exposures. Physical/Environmental Example Extensive walking, running, bending, standing, stretching, sitting, climbing stair, riding bicycle (if applicable). Working in all weather elements and temperatures. Possible exposures to hazardous materials, bodily fluids and contagious diseases. Exposure to loud sounds such as fire/burglar alarms, concerts, large indoor and outdoor events and stadium settings. Must have the ability to perform the functions of a law enforcement officer which would include being able to effect the physical arrest of a suspect, being able to climb stairs, walk across campus, stand for extended periods of time, being able to stoop down, bend over etc. Ability to work in adverse weather conditions and wear appropriate uniforms. Additional Information N/AEducation Required High school diploma or GED Required Certifications/Licensures Work Experience 3 - 5 years Describe Required Experience Required Knowledge, Skills and Abilities Meet standards and gain a Maryland Special Police Commission. Complete and pass New Office Orientation Course. Complete and pass the First Aid, CPR, and AED Certification. Complete and pass Field Training with a Field Training Officer (FTO). Complete 32 hours mandatory in-service training each year to maintain Police status and pay. Ability to write and articulate information accurately. Required to work mandatory overtime as needed. Knowledgeable of the University, its building, hours of operation and basic departmental functions. Knowledgeable of the local area, major roadways, and proximity to local transportation points. Be familiar with local governmental service points (police, fire, schools, etc.), health care facilities , and is able to promptly provide access to such services. Ability to communicate clearly and concisely via two way radio. Ability to work holidays, weekends, during emergency conditions and additional shifts as required. Must be able to successfully complete driver's clearance process. Ability to support the mission and values of a Catholic Jesuit education, as well as University goals for institutional diversity. Must pass physical exam and drug test. Must be able to secure a State of Maryland Special Police Commission (Fingerprint and FBI background check). Final compensation offers are determined by a variety of factors, including but not limited to, job-related experience, internal equity, and alignment with organizational budget. Successful candidates for any staff, faculty, or administrative position at Loyola University Maryland will be subject to a pre-employment background check. Note: Experience and/or education may be substituted for requirements. Employment Eligibility All candidates must be eligible to work in the United States and complete employment eligibility verification by the first day of employment at Loyola University Maryland, as required by law (e.g., Form I-9). Unless explicitly stated otherwise in the job description or job advertisement, Loyola University Maryland does not sponsor employment visas for this position. University Description Loyola University Maryland, located in the vibrant city of Baltimore, is a prestigious, selective, comprehensive university with a strong residential liberal-arts-based undergraduate program and professional graduate programs at the master's and doctoral levels. Founded in 1852, Loyola is a Catholic University and one of 27 Jesuit colleges and universities in the United States and the first to bear the name of Saint Ignatius Loyola, founder of the Society of Jesus . Deeply committed to the Ignatian principles upon which it was founded, Loyola focuses on the care and education of the whole person - mind, body, and spirit - and its mission centers on preparing its students to learn, lead, and serve in a diverse and changing world. The Wall Street Journal ranked Loyola No. 19 overall in the nation in its 2026 "Best Colleges" list. Loyola was also ranked No. 51 for impact on graduate salaries and No. 81 in the nation for student experience. U.S. News & World Report has ranked Loyola among the top 10 universities in the North Region for the past decade. Princeton Review named it one of the nation's top institutions for undergraduate higher education and one of the best Mid-Atlantic colleges for 2026. Loyola is one of 75 colleges and universities included on a list of the "new" dream schools in Jeffrey Selingo's book, Dream School, Finding the College That's Right for You. The list of "new" dream schools highlights institutions with strong outcomes, accessible admissions, and dynamic student experiences. Loyola was also listed among the "best value" private colleges in Kiplinger's Personal Finance . Loyola University Maryland is proud to be recognized among the nation's top institutions. From national rankings to regional accolades, our commitment to academic excellence, student success, and Jesuit values continues to earn praise from respected organizations and publications. Learn more about our prestigious rankings and notable accolades and university profile by clicking on the hyperlinks. Diversity Statement Loyola University Maryland strongly values the benefits that diversity brings to the workplace. In accord with its Ignatian values, the University is committed to creating and promoting a community that recognizes the inherent value and dignity of each person. Loyola University Maryland does not discriminate on the basis of race, sex, color, national or ethnic origin, age, religion, disability, marital status, sexual orientation, gender identity, genetic information, military status, or any other legally protected classification. The University recruits, hires, and promotes in accord with this policy and its Core Values. About Us Human Resources Work at Loyola PI52b62d503a6f-2497
07/27/2026
Full time
Loyola University Maryland Main Campus Full time R- Position Title Police Officer III S3 Work Shift Evening (4pm-12am) (United States of America) Employee Type Regular Office/Department Public Safety Work Environment Remote and hybrid positions are open to applicants based in states identified here : Work at Loyola Loyola University Maryland . Loyola University Maryland Main Campus Position Duties The Police Office position is an experienced law enforcement officer position. Campus police officers are responsible for providing highly visible patrols on and around the University campus, responding to calls for services, and identifying problem areas and situations. Campus police officers report to the Shift Supervisor (Sergeant) on their respective shifts.Essential Functions Patrol campus and the surrounding areas, respond to calls for service, back-up officers, identify and report hazards and suspicious activities. Patrol the campus being highly visible and alert for safety and security hazards, suspicious activities and intruders. Respond to alarms. Respond to all calls for campus police services. Render services as per departmental procedure. Secure buildings, offices, classrooms, and other areas per procedures. Reported incidents are investigated. Incidents are investigated thoroughly and completely with detailed information provided in a written report. Resources are sought to facilitate a logical solution/conclusion to the problem. Seeks solutions to situations and incidents.Provide assistance to the sick and injured as per the procedures identified by the National Safety Council. Identify situations requiring medical assistance. Rendering aid as CPR and First Aid certification. Utilize AED's and other issued equipments as per procedures. Provide escorts for sick or injured students, faculty and staff. Provide instructions to the Loyola community during emergencies, routine events and upon request. Makes arrests and/or transports arrestees to central booking. Appears in court to present evidence and/or testify as required.Articulate information about the University, the Department of Public Safety (procedures and programs) and provide written details about incidents and events. Articulate accurate information about the University. Write complete, accurate, and comprehensible details about incidents and events as require by departmental procedure.Assist in controlling traffic, parking enforcement and vehicle assists; contain and control crowds, provide safe environment during large events. Control traffic as directed. Enforce all parking rules and regulations. Assist motorist with vehicle problems. Contain and control crowds in order to preserve peace and maintain a safe environment.Non essential: Performs all other duties and responsibilities as assigned or directed by the supervisor. This may include attendance of and participation in required training for role. Physical/Environmental Demands Specific physical requirements or environmental exposures. Physical/Environmental Example Extensive walking, running, bending, standing, stretching, sitting, climbing stair, riding bicycle (if applicable). Working in all weather elements and temperatures. Possible exposures to hazardous materials, bodily fluids and contagious diseases. Exposure to loud sounds such as fire/burglar alarms, concerts, large indoor and outdoor events and stadium settings. Must have the ability to perform the functions of a law enforcement officer which would include being able to effect the physical arrest of a suspect, being able to climb stairs, walk across campus, stand for extended periods of time, being able to stoop down, bend over etc. Ability to work in adverse weather conditions and wear appropriate uniforms. Additional Information N/AEducation Required High school diploma or GED Required Certifications/Licensures Work Experience 3 - 5 years Describe Required Experience Required Knowledge, Skills and Abilities Meet standards and gain a Maryland Special Police Commission. Complete and pass New Office Orientation Course. Complete and pass the First Aid, CPR, and AED Certification. Complete and pass Field Training with a Field Training Officer (FTO). Complete 32 hours mandatory in-service training each year to maintain Police status and pay. Ability to write and articulate information accurately. Required to work mandatory overtime as needed. Knowledgeable of the University, its building, hours of operation and basic departmental functions. Knowledgeable of the local area, major roadways, and proximity to local transportation points. Be familiar with local governmental service points (police, fire, schools, etc.), health care facilities , and is able to promptly provide access to such services. Ability to communicate clearly and concisely via two way radio. Ability to work holidays, weekends, during emergency conditions and additional shifts as required. Must be able to successfully complete driver's clearance process. Ability to support the mission and values of a Catholic Jesuit education, as well as University goals for institutional diversity. Must pass physical exam and drug test. Must be able to secure a State of Maryland Special Police Commission (Fingerprint and FBI background check). Final compensation offers are determined by a variety of factors, including but not limited to, job-related experience, internal equity, and alignment with organizational budget. Successful candidates for any staff, faculty, or administrative position at Loyola University Maryland will be subject to a pre-employment background check. Note: Experience and/or education may be substituted for requirements. Employment Eligibility All candidates must be eligible to work in the United States and complete employment eligibility verification by the first day of employment at Loyola University Maryland, as required by law (e.g., Form I-9). Unless explicitly stated otherwise in the job description or job advertisement, Loyola University Maryland does not sponsor employment visas for this position. University Description Loyola University Maryland, located in the vibrant city of Baltimore, is a prestigious, selective, comprehensive university with a strong residential liberal-arts-based undergraduate program and professional graduate programs at the master's and doctoral levels. Founded in 1852, Loyola is a Catholic University and one of 27 Jesuit colleges and universities in the United States and the first to bear the name of Saint Ignatius Loyola, founder of the Society of Jesus . Deeply committed to the Ignatian principles upon which it was founded, Loyola focuses on the care and education of the whole person - mind, body, and spirit - and its mission centers on preparing its students to learn, lead, and serve in a diverse and changing world. The Wall Street Journal ranked Loyola No. 19 overall in the nation in its 2026 "Best Colleges" list. Loyola was also ranked No. 51 for impact on graduate salaries and No. 81 in the nation for student experience. U.S. News & World Report has ranked Loyola among the top 10 universities in the North Region for the past decade. Princeton Review named it one of the nation's top institutions for undergraduate higher education and one of the best Mid-Atlantic colleges for 2026. Loyola is one of 75 colleges and universities included on a list of the "new" dream schools in Jeffrey Selingo's book, Dream School, Finding the College That's Right for You. The list of "new" dream schools highlights institutions with strong outcomes, accessible admissions, and dynamic student experiences. Loyola was also listed among the "best value" private colleges in Kiplinger's Personal Finance . Loyola University Maryland is proud to be recognized among the nation's top institutions. From national rankings to regional accolades, our commitment to academic excellence, student success, and Jesuit values continues to earn praise from respected organizations and publications. Learn more about our prestigious rankings and notable accolades and university profile by clicking on the hyperlinks. Diversity Statement Loyola University Maryland strongly values the benefits that diversity brings to the workplace. In accord with its Ignatian values, the University is committed to creating and promoting a community that recognizes the inherent value and dignity of each person. Loyola University Maryland does not discriminate on the basis of race, sex, color, national or ethnic origin, age, religion, disability, marital status, sexual orientation, gender identity, genetic information, military status, or any other legally protected classification. The University recruits, hires, and promotes in accord with this policy and its Core Values. About Us Human Resources Work at Loyola PI52b62d503a6f-2497
Who We Are Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips - the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world - like AI and IoT. If you want to push the boundaries of materials science and engineering to create next generation technology, join us to deliver material innovation that changes the world. What We Offer Salary: $31.00 - $42.40 Location: Rio Rancho,NM You'll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible-while learning every day in a supportive leading global company. Visit our Careers website to learn more. At Applied Materials, we care about the health and wellbeing of our employees. We're committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits . As a Field Service Engineer Customer Engineer at Applied Materials, you serve as the direct liaison with customers, collaborating closely to install, maintain, and upgrade equipment. You'll use digital analytics for troubleshooting and apply basic diagnostic techniques to assess and address technical issues. Your responsibilities include performing preventative and corrective maintenance on various systems such as electrical, vacuum, mechanical, plasma, hydraulic, and gas systems. Additionally, you'll coordinate and communicate directly with customers to ensure smooth operations and exceptional service. Role Responsibilities: Collaborate with Senior Field Service Engineers Customer Engineers in installing, maintaining, and upgrading customer equipment Use digital analytics for troubleshooting Apply basic diagnostic techniques to assess equipment and address technical issues, with guidance from Senior Field Service Engineers Customer Engineers Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems (training provided) Coordinate and communicate directly with customers Fulfill additional duties, as assigned Minimum Qualifications: Completion of an Associate degree, military technical training, field service experience, or trade certification 1-2 years of work experience in customer/field service support, or a related technical field Ability to read and interpret electrical and mechanical schematics Experience diagnosing and resolving basic technical challenges Basic mechanical aptitude with pneumatics, hydraulics, electronics, vacuum, or thermodynamics Familiarity with hand tools and their appropriate usage, including digital multimeters Effective written and verbal communication skills Basic knowledge of Microsoft Excel, Word, and PowerPoint Possession of a valid driver's license and the ability to obtain a passport, if travel is required. Able to meet all on-site requirements, including safety, environmental guidelines, and COVID-19 protocols Preferred Qualifications: 2-4 years of work experience in customer/field service support, or a related technical field Physical Requirements: This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields. Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Yes, 20% of the Time Relocation Eligible: Yes The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable. For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement. Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. In addition, Applied endeavors to make our careers site accessible to all users. If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at , or by calling our HR Direct Help Line at , option 1, and following the prompts to speak to an HR Advisor. This contact is for accommodation requests only and cannot be used to inquire about the status of applications.
07/27/2026
Full time
Who We Are Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips - the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world - like AI and IoT. If you want to push the boundaries of materials science and engineering to create next generation technology, join us to deliver material innovation that changes the world. What We Offer Salary: $31.00 - $42.40 Location: Rio Rancho,NM You'll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible-while learning every day in a supportive leading global company. Visit our Careers website to learn more. At Applied Materials, we care about the health and wellbeing of our employees. We're committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits . As a Field Service Engineer Customer Engineer at Applied Materials, you serve as the direct liaison with customers, collaborating closely to install, maintain, and upgrade equipment. You'll use digital analytics for troubleshooting and apply basic diagnostic techniques to assess and address technical issues. Your responsibilities include performing preventative and corrective maintenance on various systems such as electrical, vacuum, mechanical, plasma, hydraulic, and gas systems. Additionally, you'll coordinate and communicate directly with customers to ensure smooth operations and exceptional service. Role Responsibilities: Collaborate with Senior Field Service Engineers Customer Engineers in installing, maintaining, and upgrading customer equipment Use digital analytics for troubleshooting Apply basic diagnostic techniques to assess equipment and address technical issues, with guidance from Senior Field Service Engineers Customer Engineers Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems (training provided) Coordinate and communicate directly with customers Fulfill additional duties, as assigned Minimum Qualifications: Completion of an Associate degree, military technical training, field service experience, or trade certification 1-2 years of work experience in customer/field service support, or a related technical field Ability to read and interpret electrical and mechanical schematics Experience diagnosing and resolving basic technical challenges Basic mechanical aptitude with pneumatics, hydraulics, electronics, vacuum, or thermodynamics Familiarity with hand tools and their appropriate usage, including digital multimeters Effective written and verbal communication skills Basic knowledge of Microsoft Excel, Word, and PowerPoint Possession of a valid driver's license and the ability to obtain a passport, if travel is required. Able to meet all on-site requirements, including safety, environmental guidelines, and COVID-19 protocols Preferred Qualifications: 2-4 years of work experience in customer/field service support, or a related technical field Physical Requirements: This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields. Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Yes, 20% of the Time Relocation Eligible: Yes The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable. For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement. Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. In addition, Applied endeavors to make our careers site accessible to all users. If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at , or by calling our HR Direct Help Line at , option 1, and following the prompts to speak to an HR Advisor. This contact is for accommodation requests only and cannot be used to inquire about the status of applications.
Pay: $22.93-$28.65 per hour, depending on certifications and experience Shift Available: Monday-Friday, 8:00 AM - 4:30 PM Annual Tool Allowance: Available Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
Pay: $22.93-$28.65 per hour, depending on certifications and experience Shift Available: Monday-Friday, 8:00 AM - 4:30 PM Annual Tool Allowance: Available Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Knowledge of controls and electric (AC - Alternative current & DC - Direct current) low voltage Complete small electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, preventive maintenance (PM) per manufacturers recommendations Basic knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems Basic knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanism, steering systems, suspension systems Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Four years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved the defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Job Overview: Fleet Mechanic III - Pittsburgh, PA About the Role This role supports our Pittsburgh, PA and Fairmont, WV facilities Perform scheduled preventative maintenance and necessary repairs to automobiles, trucks (light and heavy), trailers, vans and forklifts. Disassembles and overhauls motors, transmissions, clutches, rear ends and electrical systems. Complete all necessary documents, including vehicle records. Manage ordering and inventory of parts. Will act as a mentor to the class I & II mechanics. Shift and Schedule Monday through Friday 10:00am until 6:30pm or finished Flexibility to work overtime and weekends as needed About You We are looking for a self-motivated individual who enjoys working in a fast-paced environment. You have great communication skills. You are a problem solver with technical aptitude and a willingness to keep learning. Please apply now if you are the person we're searching for! Total Rewards: Pay starting at $35.11 per hour. The employee will move to a higher rate of $36.90 per hour in the quarter after their 6 month anniversary Benefits, subject to eligibility: Medical, Dental and Vision, Paid Time Off, 401(k) program with employer match, Child & Elder Care, Adoption Benefits, Paid Parental Leave, Fertility Benefits, Employee Resource Groups, Breastmilk Shipping Services, Dependent Scholarship Program, Education Assistance, Employee Assistance Program, Personalized Wellness Platform and more! Requirements: High school diploma or general equivalency diploma (GED) preferred 1 year or more of mechanic experience on a fleet Must be able to work on all types of vehicles (diesel trucks, electric and propane forklift, etc ) Lift, push, and pull a minimum of 50 pounds Able to supply your own set of tools to perform the job Willing and able to acquire the necessary certifications and licenses needed for the position within the first year of employment to include: ASE Heavy and Medium duty certification, DOT Commercial Driver's License (CDL A), DOT brake and annual inspection certification, and A/C certification Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
07/27/2026
Full time
Job Overview: Fleet Mechanic III - Pittsburgh, PA About the Role This role supports our Pittsburgh, PA and Fairmont, WV facilities Perform scheduled preventative maintenance and necessary repairs to automobiles, trucks (light and heavy), trailers, vans and forklifts. Disassembles and overhauls motors, transmissions, clutches, rear ends and electrical systems. Complete all necessary documents, including vehicle records. Manage ordering and inventory of parts. Will act as a mentor to the class I & II mechanics. Shift and Schedule Monday through Friday 10:00am until 6:30pm or finished Flexibility to work overtime and weekends as needed About You We are looking for a self-motivated individual who enjoys working in a fast-paced environment. You have great communication skills. You are a problem solver with technical aptitude and a willingness to keep learning. Please apply now if you are the person we're searching for! Total Rewards: Pay starting at $35.11 per hour. The employee will move to a higher rate of $36.90 per hour in the quarter after their 6 month anniversary Benefits, subject to eligibility: Medical, Dental and Vision, Paid Time Off, 401(k) program with employer match, Child & Elder Care, Adoption Benefits, Paid Parental Leave, Fertility Benefits, Employee Resource Groups, Breastmilk Shipping Services, Dependent Scholarship Program, Education Assistance, Employee Assistance Program, Personalized Wellness Platform and more! Requirements: High school diploma or general equivalency diploma (GED) preferred 1 year or more of mechanic experience on a fleet Must be able to work on all types of vehicles (diesel trucks, electric and propane forklift, etc ) Lift, push, and pull a minimum of 50 pounds Able to supply your own set of tools to perform the job Willing and able to acquire the necessary certifications and licenses needed for the position within the first year of employment to include: ASE Heavy and Medium duty certification, DOT Commercial Driver's License (CDL A), DOT brake and annual inspection certification, and A/C certification Company Overview: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs and occasions. Our North American refreshment beverage business holds leadership positions across carbonated soft drinks, water, juice and mixers with a portfolio of iconic brands such as Dr Pepper , Canada Dry , Mott's , A&W , Peñafiel , GHOST , 7UP , Snapple , Clamato and Core Hydration . Our global coffee business spans more than 100 markets and includes the leading Keurig single serve brewing system in the U.S. and Canada, along with powerhouse brands such as Peet's, L'OR and Jacobs, and other regional coffee leaders. Our more than 50,000 employees aim to enhance the experience of every beverage and coffee occasion while making a positive impact for people, communities and the planet. We strive to be an employer of choice, providing a culture and opportunities that empower our team to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation and growth. Will you join us? Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. AI does not make hiring decisions; all decisions throughout the hiring process are made by talent acquisition team members. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to in lieu of clicking Apply. In order for your application to be considered and opted out of AI, you must include the words "AI Opt-Out" and either job title and location or Job ID # in the email subject line in your email application.
JOB SUMMARY This is an Operations position responsible for overseeing the safe operation, daily monitoring, and maintenance activities associated with Material Handling Equipment (MHE), and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Proficient in electrical meter testing Knowledge of controls and electric (AC - alternative current & DC - direct current low voltage) Understanding and working knowledge of PLC's (programming logic controller) and PLC troubleshooting Motors and Motor starter knowledge (AC & DC) Motor starter knowledge Contactor and relay knowledge and repair Complete electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet, checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, PM per manufacturers recommendations Knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems Knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanisms, steering systems, suspension systems Completes all special projects associated with building or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries, perform all other duties as assigned Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation Train and mentor MHE Tech I and II QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Six years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved a defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Trade electrical I & II training (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
JOB SUMMARY This is an Operations position responsible for overseeing the safe operation, daily monitoring, and maintenance activities associated with Material Handling Equipment (MHE), and maintenance of industrial batteries. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements Proficient in electrical meter testing Knowledge of controls and electric (AC - alternative current & DC - direct current low voltage) Understanding and working knowledge of PLC's (programming logic controller) and PLC troubleshooting Motors and Motor starter knowledge (AC & DC) Motor starter knowledge Contactor and relay knowledge and repair Complete electrical repairs and welding projects as needed. Maintain power material handling equipment (MHE). Including preventive maintenance (PM) of MHE fleet, checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, PM per manufacturers recommendations Knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC systems, drive motors, power amps, electrical controls including PLC systems Knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanisms, steering systems, suspension systems Completes all special projects associated with building or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices Assist the battery technicians; duties will include assisting in battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries, perform all other duties as assigned Participate in departmental on-call program, as designated Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis. Maintain all tools and equipment in clean, safe, working order Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job Respond to emergency situations to ensure employee and facility safety Champion overall safety in the department Comply with OSHA, and other local, state and federal regulations Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance Interact effectively, build relationships, and demonstrate a high level of cooperation Train and mentor MHE Tech I and II QUALIFICATIONS Education High School diploma or general education degree (GED); Tech school or equivalent is preferred (2 years) Experience Six years in an MHE maintenance position; or equivalent combination of education and related experience Certificates, Licenses, and Registrations: Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved a defensive driving program Obtain a Powered Industrial Equipment Certification from Sysco within 3 months MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) Trade electrical I & II training (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Come and join the magic with Aulani, A Disney Resort and Spa! Perks and benefits may include: 100% full coverage of healthcare for you and your eligible dependents Tuition paid upfront at network schools Free lunch Free parking Free theme park admission and much more! Bell and Valet cast members will assist arriving and departing guests with their vehicles, including, but not limited to shuttles, busses and other transportation, and driving all types of guest vehicles. During 3rd shift, Cast Member may be required to perform job functions for both roles. Responsibilities : Park and drive vehicles. Manage parking areas (barricades, directing traffic, etc ) Transport guest to various locations. Transport guest luggage including but not limited to Rooms/Vehicles/Storage. Care and Storage of guest property Delivering items to guest rooms, including newspapers, express check-outs, including but not limited to guest deliveries (i.e. flowers, packages/boxes) Excellent communication skills and high guest service expectations Greet Guests with positive, friendly and helpful attitude Proactively address guest needs by answering questions, giving directions and other information regarding the hotel/resort or surrounding areas Basic Qualifications : Valid driver's license and clean driving record (no tickets/accidents/ moving violations in the past 12 months) for Valet position Ability to drive manual/automatic transmission (valet position) Works indoors and outdoors in all kinds of weather including extreme temperatures and high humidity Preferred Qualifications: Previous experience in a Hotel/Resort environment preferred Previous experience working in a parking facility with type service (airports, business office building, private parking structures preferred Knowledge of Hawaiian/Japanese language preferred Additional Information : SCHEDULE AVAILABILTY Full Time - Full availability is required seven (7) days per week, including early mornings, late nights, weekends, and holidays. SUBMITTING YOUR APPLICATION After clicking "Apply for this job" below, the employment application will open in a new window. Please complete ALL pages of the application by clicking "Next" on each page, then "Submit" on the final page. The pay rate for this role in Hawaii is $21.26 per hour, plus gratuities. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit:
07/27/2026
Full time
Come and join the magic with Aulani, A Disney Resort and Spa! Perks and benefits may include: 100% full coverage of healthcare for you and your eligible dependents Tuition paid upfront at network schools Free lunch Free parking Free theme park admission and much more! Bell and Valet cast members will assist arriving and departing guests with their vehicles, including, but not limited to shuttles, busses and other transportation, and driving all types of guest vehicles. During 3rd shift, Cast Member may be required to perform job functions for both roles. Responsibilities : Park and drive vehicles. Manage parking areas (barricades, directing traffic, etc ) Transport guest to various locations. Transport guest luggage including but not limited to Rooms/Vehicles/Storage. Care and Storage of guest property Delivering items to guest rooms, including newspapers, express check-outs, including but not limited to guest deliveries (i.e. flowers, packages/boxes) Excellent communication skills and high guest service expectations Greet Guests with positive, friendly and helpful attitude Proactively address guest needs by answering questions, giving directions and other information regarding the hotel/resort or surrounding areas Basic Qualifications : Valid driver's license and clean driving record (no tickets/accidents/ moving violations in the past 12 months) for Valet position Ability to drive manual/automatic transmission (valet position) Works indoors and outdoors in all kinds of weather including extreme temperatures and high humidity Preferred Qualifications: Previous experience in a Hotel/Resort environment preferred Previous experience working in a parking facility with type service (airports, business office building, private parking structures preferred Knowledge of Hawaiian/Japanese language preferred Additional Information : SCHEDULE AVAILABILTY Full Time - Full availability is required seven (7) days per week, including early mornings, late nights, weekends, and holidays. SUBMITTING YOUR APPLICATION After clicking "Apply for this job" below, the employment application will open in a new window. Please complete ALL pages of the application by clicking "Next" on each page, then "Submit" on the final page. The pay rate for this role in Hawaii is $21.26 per hour, plus gratuities. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered. To learn more about our benefits visit:
