Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters. A values-based culture where people care about each other and the work they do together. Flexibility Training and development to accelerate learning and career advancement. Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Pay Range: $30.00 - $35.00/hr Calibration Technician III is a mid to upper-level technician position with a minimum of four (4) years commercial calibration experience preferred. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of six (6) disciplines, with expert knowledge in two (2) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician III will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Completion of a professional CCT or CMT certification is desired for this role. Responsibilities Essential Duties and Responsibilities Perform calibration work with little to no supervision Conduct independent research when necessary Coordinate and manage daily workloads without direction from manager Identify and utilize appropriate measurement techniques Maintain calibration standards Understand and apply uncertainties to measurements made Read and interpret labs' scopes of accreditation Work effectively with lab support staff Working knowledge and competency in six (6) disciplines and expert in two (2) disciplines preferred Perform calibrations within a laboratory or customer onsite setting Work at customer on-sites with little to no direction Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as assigned Travel requirement: up to 50% of work schedule Primary Objectives Learn and develop fundamental calibration skills and techniques, which includes high level production with few errors Develop team lead skills and responsibilities Develop skills necessary to train and advise lower-level technicians Develop skills necessary to advance to Senior Calibration Technician position, which includes a working knowledge and competency in at least eight (8) disciplines and expert competency in three (3) disciplines. Deliver on Transcat's Quality Policy (QAC-F01-001) Qualifications Required Knowledge, Skills, Abilities, and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license Education and Experience Required: Associates degree from college or technical school, or four+ (4+) years related experience and/or training, or equivalent combination of education and experience Experience working within ISO 17025 and the ability to create, edit and maintain uncertainty budgets with an extensive understanding of statistics Preferred: Four+ (4+) years of commercial calibration experience CCT or CMT certification Previous experience or training in electronics or machining Extensive statistical background Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Advanced organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment: The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.
11/14/2026
Full time
Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters. A values-based culture where people care about each other and the work they do together. Flexibility Training and development to accelerate learning and career advancement. Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Pay Range: $30.00 - $35.00/hr Calibration Technician III is a mid to upper-level technician position with a minimum of four (4) years commercial calibration experience preferred. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of six (6) disciplines, with expert knowledge in two (2) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician III will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Completion of a professional CCT or CMT certification is desired for this role. Responsibilities Essential Duties and Responsibilities Perform calibration work with little to no supervision Conduct independent research when necessary Coordinate and manage daily workloads without direction from manager Identify and utilize appropriate measurement techniques Maintain calibration standards Understand and apply uncertainties to measurements made Read and interpret labs' scopes of accreditation Work effectively with lab support staff Working knowledge and competency in six (6) disciplines and expert in two (2) disciplines preferred Perform calibrations within a laboratory or customer onsite setting Work at customer on-sites with little to no direction Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as assigned Travel requirement: up to 50% of work schedule Primary Objectives Learn and develop fundamental calibration skills and techniques, which includes high level production with few errors Develop team lead skills and responsibilities Develop skills necessary to train and advise lower-level technicians Develop skills necessary to advance to Senior Calibration Technician position, which includes a working knowledge and competency in at least eight (8) disciplines and expert competency in three (3) disciplines. Deliver on Transcat's Quality Policy (QAC-F01-001) Qualifications Required Knowledge, Skills, Abilities, and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license Education and Experience Required: Associates degree from college or technical school, or four+ (4+) years related experience and/or training, or equivalent combination of education and experience Experience working within ISO 17025 and the ability to create, edit and maintain uncertainty budgets with an extensive understanding of statistics Preferred: Four+ (4+) years of commercial calibration experience CCT or CMT certification Previous experience or training in electronics or machining Extensive statistical background Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Advanced organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment: The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.
Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters A values-based culture where people care about each other and the work they do together Flexibility Training and development to accelerate learning and career advancement Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Pay range is $21.00 - $28.00/hr Position Summary Calibration Technician I is an entry-level position that requires either education in the electronics/calibration field or at least one (1) year of calibration experience. Calibration Technicians at this level typically can calibrate low-end process instrumentation in up to three (3) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. Responsibilities Primary Objectives Learn fundamental calibration skills and techniques Develop skills necessary to perform calibrations independently Develop skills necessary to advance to Calibration Technician II position, which includes a working knowledge and competency in at least four (4) disciplines and expert competency in one (1) discipline Deliver on Transcat's Quality Policy (QAC-F01-001) Essential Duties and Responsibilities Work with other technicians within the lab to learn calibration fundamentals, which can include measurement, temperature, electronics, etc. Identify and utilize appropriate measurement techniques Maintain calibration standards Working knowledge and competency in at least three 3 disciplines (dimensional, electrical, torque, temperature, pressure, etc.) Perform calibration work within a laboratory setting and/or while supervised at a customer on-site Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as assigned Travel requirement: 25-50% of work schedule Qualifications Required Knowledge, Skills, Abilities, and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license and acceptable driver history Education and Experience Required: Associates degree from college or technical school; or at least one (1) year related experience and/or training. or equivalent combination of education and experience Preferred: Previous experience or training in electronics or machining Basic mathematical skills including algebra, geometry, and statistics Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Physical Demands The physical demands described here are representative of the physical requirements necessary for an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report. Ind1
11/14/2026
Full time
Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters A values-based culture where people care about each other and the work they do together Flexibility Training and development to accelerate learning and career advancement Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Pay range is $21.00 - $28.00/hr Position Summary Calibration Technician I is an entry-level position that requires either education in the electronics/calibration field or at least one (1) year of calibration experience. Calibration Technicians at this level typically can calibrate low-end process instrumentation in up to three (3) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. Responsibilities Primary Objectives Learn fundamental calibration skills and techniques Develop skills necessary to perform calibrations independently Develop skills necessary to advance to Calibration Technician II position, which includes a working knowledge and competency in at least four (4) disciplines and expert competency in one (1) discipline Deliver on Transcat's Quality Policy (QAC-F01-001) Essential Duties and Responsibilities Work with other technicians within the lab to learn calibration fundamentals, which can include measurement, temperature, electronics, etc. Identify and utilize appropriate measurement techniques Maintain calibration standards Working knowledge and competency in at least three 3 disciplines (dimensional, electrical, torque, temperature, pressure, etc.) Perform calibration work within a laboratory setting and/or while supervised at a customer on-site Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as assigned Travel requirement: 25-50% of work schedule Qualifications Required Knowledge, Skills, Abilities, and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license and acceptable driver history Education and Experience Required: Associates degree from college or technical school; or at least one (1) year related experience and/or training. or equivalent combination of education and experience Preferred: Previous experience or training in electronics or machining Basic mathematical skills including algebra, geometry, and statistics Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Physical Demands The physical demands described here are representative of the physical requirements necessary for an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report. Ind1
Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters. A values-based culture where people care about each other and the work they do together. Flexibility Training and development to accelerate learning and career advancement. Competitive compensation targeting $33-35/ hour Great benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Calibration Technician III is a mid to upper-level technician position with a minimum of four (4) years commercial calibration experience preferred. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of six (6) disciplines, with expert knowledge in two (2) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician III will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Completion of a professional CCT or CMT certification is desired for this role. Responsibilities Essential Duties and Responsibilities Perform calibration work with little to no supervision Conduct independent research when necessary Coordinate and manage daily workloads without direction from manager Identify and utilize appropriate measurement techniques Maintain calibration standards Understand and apply uncertainties to measurements made Read and interpret labs' scopes of accreditation Work effectively with lab support staff Working knowledge and competency in six (6) disciplines and expert in two (2) disciplines preferred Perform calibrations within a laboratory or customer onsite setting Work at customer on-sites with little to no direction Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as assigned Travel requirement: up to 50% of work schedule Primary Objectives Learn and develop fundamental calibration skills and techniques, which includes high level production with few errors Develop team lead skills and responsibilities Develop skills necessary to train and advise lower-level technicians Develop skills necessary to advance to Senior Calibration Technician position, which includes a working knowledge and competency in at least eight (8) disciplines and expert competency in three (3) disciplines. Deliver on Transcat's Quality Policy (QAC-F01-001) Qualifications Required Knowledge, Skills, Abilities, and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license Education and Experience Required: Associates degree from college or technical school, or four+ (4+) years related experience and/or training, or equivalent combination of education and experience Experience working within ISO 17025 and the ability to create, edit and maintain uncertainty budgets with an extensive understanding of statistics Preferred: Four+ (4+) years of commercial calibration experience CCT or CMT certification Previous experience or training in electronics or machining Extensive statistical background Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Advanced organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment: The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report. ind1
11/14/2026
Full time
Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters. A values-based culture where people care about each other and the work they do together. Flexibility Training and development to accelerate learning and career advancement. Competitive compensation targeting $33-35/ hour Great benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Calibration Technician III is a mid to upper-level technician position with a minimum of four (4) years commercial calibration experience preferred. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of six (6) disciplines, with expert knowledge in two (2) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician III will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Completion of a professional CCT or CMT certification is desired for this role. Responsibilities Essential Duties and Responsibilities Perform calibration work with little to no supervision Conduct independent research when necessary Coordinate and manage daily workloads without direction from manager Identify and utilize appropriate measurement techniques Maintain calibration standards Understand and apply uncertainties to measurements made Read and interpret labs' scopes of accreditation Work effectively with lab support staff Working knowledge and competency in six (6) disciplines and expert in two (2) disciplines preferred Perform calibrations within a laboratory or customer onsite setting Work at customer on-sites with little to no direction Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as assigned Travel requirement: up to 50% of work schedule Primary Objectives Learn and develop fundamental calibration skills and techniques, which includes high level production with few errors Develop team lead skills and responsibilities Develop skills necessary to train and advise lower-level technicians Develop skills necessary to advance to Senior Calibration Technician position, which includes a working knowledge and competency in at least eight (8) disciplines and expert competency in three (3) disciplines. Deliver on Transcat's Quality Policy (QAC-F01-001) Qualifications Required Knowledge, Skills, Abilities, and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license Education and Experience Required: Associates degree from college or technical school, or four+ (4+) years related experience and/or training, or equivalent combination of education and experience Experience working within ISO 17025 and the ability to create, edit and maintain uncertainty budgets with an extensive understanding of statistics Preferred: Four+ (4+) years of commercial calibration experience CCT or CMT certification Previous experience or training in electronics or machining Extensive statistical background Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Advanced organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment: The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report. ind1
Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters A values-based culture where people care about each other and the work they do together Flexibility Training and development to accelerate learning and career advancement Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Pay range is $21.00 - $45.00 / hour depending on experience Position Summary Calibration Technician I is an entry-level position that requires either education in the electronics/calibration field or at least one (1) year of calibration experience. Calibration Technicians at this level typically can calibrate low-end process instrumentation in up to three (3) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. Calibration Technician II is a mid-level position, for which at least three (3) years of commercial calibration experience is preferred. Calibration Technicians at this level typically can calibrate higher-level equipment and calibrate equipment across a minimum of four (4) disciplines, with expert knowledge in one (1) discipline (e.g., Electrical, Dimensional, or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician II will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Calibration Technician III is a mid to upper-level technician position with a minimum of four (4) years commercial calibration experience preferred. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of six (6) disciplines, with expert knowledge in two (2) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician III will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Completion of a professional CCT or CMT certification is desired for this role. Senior Calibration Technician is the highest-level technician position within Transcat with a minimum of six (6) years commercial calibration experience preferred. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of eight (8) disciplines, with expert knowledge in three (3) disciplines (e.g., Electrical, Dimensional, or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Senior Calibration Technician will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. CCT or CMT certification is desired for this role. Responsibilities Primary Objectives Learn fundamental calibration skills and techniques Develop skills necessary to perform calibrations independently Develop skills necessary to advance to Calibration Technician II position, which includes a working knowledge and competency in at least four (4) disciplines and expert competency in one (1) discipline Deliver on Transcat's Quality Policy (QAC-F01-001) Essential Duties and Responsibilities Work with other technicians within the lab to learn calibration fundamentals, which can include measurement, temperature, electronics, etc. Identify and utilize appropriate measurement techniques Maintain calibration standards Working knowledge and competency in at least three 3 disciplines (dimensional, electrical, torque, temperature, pressure, etc.) Perform calibration work within a laboratory setting and/or while supervised at a customer on-site Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as assigned Travel requirement: 25-50% of work schedule Qualifications Required Knowledge, Skills, Abilities, and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license and acceptable driver history Education and Experience Required: Associates degree from college or technical school; or at least one (1) year related experience and/or training. or equivalent combination of education and experience Preferred: Previous experience or training in electronics or machining Basic mathematical skills including algebra, geometry, and statistics Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Physical Demands The physical demands described here are representative of the physical requirements necessary for an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.
11/13/2026
Full time
Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters A values-based culture where people care about each other and the work they do together Flexibility Training and development to accelerate learning and career advancement Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Pay range is $21.00 - $45.00 / hour depending on experience Position Summary Calibration Technician I is an entry-level position that requires either education in the electronics/calibration field or at least one (1) year of calibration experience. Calibration Technicians at this level typically can calibrate low-end process instrumentation in up to three (3) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. Calibration Technician II is a mid-level position, for which at least three (3) years of commercial calibration experience is preferred. Calibration Technicians at this level typically can calibrate higher-level equipment and calibrate equipment across a minimum of four (4) disciplines, with expert knowledge in one (1) discipline (e.g., Electrical, Dimensional, or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician II will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Calibration Technician III is a mid to upper-level technician position with a minimum of four (4) years commercial calibration experience preferred. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of six (6) disciplines, with expert knowledge in two (2) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician III will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Completion of a professional CCT or CMT certification is desired for this role. Senior Calibration Technician is the highest-level technician position within Transcat with a minimum of six (6) years commercial calibration experience preferred. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of eight (8) disciplines, with expert knowledge in three (3) disciplines (e.g., Electrical, Dimensional, or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Senior Calibration Technician will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. CCT or CMT certification is desired for this role. Responsibilities Primary Objectives Learn fundamental calibration skills and techniques Develop skills necessary to perform calibrations independently Develop skills necessary to advance to Calibration Technician II position, which includes a working knowledge and competency in at least four (4) disciplines and expert competency in one (1) discipline Deliver on Transcat's Quality Policy (QAC-F01-001) Essential Duties and Responsibilities Work with other technicians within the lab to learn calibration fundamentals, which can include measurement, temperature, electronics, etc. Identify and utilize appropriate measurement techniques Maintain calibration standards Working knowledge and competency in at least three 3 disciplines (dimensional, electrical, torque, temperature, pressure, etc.) Perform calibration work within a laboratory setting and/or while supervised at a customer on-site Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as assigned Travel requirement: 25-50% of work schedule Qualifications Required Knowledge, Skills, Abilities, and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license and acceptable driver history Education and Experience Required: Associates degree from college or technical school; or at least one (1) year related experience and/or training. or equivalent combination of education and experience Preferred: Previous experience or training in electronics or machining Basic mathematical skills including algebra, geometry, and statistics Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Physical Demands The physical demands described here are representative of the physical requirements necessary for an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.
Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters. A values-based culture where people care about each other and the work they do together. Flexibility Training and development to accelerate learning and career advancement. Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Calibration Technician II is a mid-level position, for which at least three (3) years of commercial calibration experience is preferred. Calibration Technicians at this level typically can calibrate higher-level equipment and calibrate equipment across a minimum of four (4) disciplines, with expert knowledge in one (1) discipline (e.g., Electrical, Dimensional, or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician II will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Responsibilities Essential Duties and Responsibilities Perform calibration work with little to no supervision Conduct independent research when necessary Coordinate and manage daily workloads without direction from manager Identify and utilize appropriate measurement techniques Maintain calibration standards Understand and apply uncertainties to measurements made Be able to read and interpret labs' scopes of accreditation Work effectively with lab support staff Working knowledge and competency in at least four (4) disciplines and expert in one (1) discipline preferred Perform calibrations within a laboratory or customer on-site setting Work at customer on-sites with little to no direction Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as may be assigned Travel requirements: up to 50% of work schedule Primary Objectives Learn and develop fundamental skills necessary to calibration techniques and processes, which includes high level production with minimal errors Develop team lead skills and responsibilities Develop skills necessary to train and advise lower-level technicians Develop skills necessary to advance to Tech III position, which includes a working knowledge and competency in at least six (6) disciplines and expert in two (2) disciplines Strive to obtain the ASQ/CCT or CMT certification Deliver on Transcat's Quality Policy (QAC-F01-001) Qualifications Required Knowledge, Skills , Abilities , and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license Education and Experience Associates degree from college or technical school, or 3+ years related experience and/or training, or equivalent combination of education and experience Preferred: Three+ (3+) years of commercial calibration experience Previous experience or training in electronics or machining Basic mathematical skills including algebra, geometry, and statistics Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Basic organizational and time management skills Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Advanced organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Experience working within ISO 17025 preferred. Understanding of uncertainty contributions to the measurement process Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.
11/13/2026
Full time
Job Description Job Description Overview Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters. A values-based culture where people care about each other and the work they do together. Flexibility Training and development to accelerate learning and career advancement. Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Calibration Technician II is a mid-level position, for which at least three (3) years of commercial calibration experience is preferred. Calibration Technicians at this level typically can calibrate higher-level equipment and calibrate equipment across a minimum of four (4) disciplines, with expert knowledge in one (1) discipline (e.g., Electrical, Dimensional, or Pressure). Proficiency and expertise are determined in accordance with Transcat's technician skills progression matrix. A Calibration Technician II will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Responsibilities Essential Duties and Responsibilities Perform calibration work with little to no supervision Conduct independent research when necessary Coordinate and manage daily workloads without direction from manager Identify and utilize appropriate measurement techniques Maintain calibration standards Understand and apply uncertainties to measurements made Be able to read and interpret labs' scopes of accreditation Work effectively with lab support staff Working knowledge and competency in at least four (4) disciplines and expert in one (1) discipline preferred Perform calibrations within a laboratory or customer on-site setting Work at customer on-sites with little to no direction Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as may be assigned Travel requirements: up to 50% of work schedule Primary Objectives Learn and develop fundamental skills necessary to calibration techniques and processes, which includes high level production with minimal errors Develop team lead skills and responsibilities Develop skills necessary to train and advise lower-level technicians Develop skills necessary to advance to Tech III position, which includes a working knowledge and competency in at least six (6) disciplines and expert in two (2) disciplines Strive to obtain the ASQ/CCT or CMT certification Deliver on Transcat's Quality Policy (QAC-F01-001) Qualifications Required Knowledge, Skills , Abilities , and Qualifications Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction Strong interpersonal and customer service skills Excellent attention to detail Self-motivated learner with the ability to learn new skills related to calibration and calibration processes Ability to take direction and learn from feedback Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team 3+ years driving experience with a valid driver's license Education and Experience Associates degree from college or technical school, or 3+ years related experience and/or training, or equivalent combination of education and experience Preferred: Three+ (3+) years of commercial calibration experience Previous experience or training in electronics or machining Basic mathematical skills including algebra, geometry, and statistics Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Basic organizational and time management skills Familiarity with basic hand tools Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Advanced organizational and time management skills Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Experience working within ISO 17025 preferred. Understanding of uncertainty contributions to the measurement process Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.
Job Description Job Description Job Title: Calibration Technician III Location: Morrisville, NC 27560 Duration: 8 Months Pay Rate: $34.91/hr. The Calibration Technician manages laboratory equipment calibrations, maintenance, and repairs, ensuring compliance with all GxP regulations. This role is responsible for the quality review of documentation and the initiation of deviation investigations related to metrology. Individual works under the supervision and direction of more senior level roles and uses existing procedures to solve routine or standard problems Key Responsibilities: Calibration Execution: Independently performs maintenance, calibration, and repairs on active equipment, including loop calibrations. Reviews and approves equipment calibration and maintenance documentation performed by external vendors with a detailed eye for good documentation practices. Ensures all calibration activities comply with relevant industry regulations (e.g., USP, NIST, FDA, GLP, GMP). Safety and Quality Compliance: Adheres to all applicable written Standard Operating Procedures (SOPs), company policies, and technical guidance documents. Maintain training compliance in the Quality Management System. Initiates, writes, and assists with investigations related to instrument calibration failures or other instrument related issues. Primary responsibility for the initiation, writing, and support of investigations (Deviations/CAPAs) related to instrument calibration failures or other instrument-related issues. Vendor Management (Metrology): Oversees and manages onsite vendors to ensure all training and compliance requirements are met for maintenance, calibration, and repairs on laboratory equipment. Responsible for the technical review and approval of all equipment calibration and maintenance documentation performed by external parties with a detailed eye for good documentation practices. Asset Induction: Induction of new equipment including development of calibration requirements and schedules in coordination with equipment owners and planner / scheduler. Research the operating specifications of new equipment, obtain suitable standards, and establish the calibration acceptance criteria. Documentation: Maintains and/or generates SOPs and controlled documents pertaining to the calibration program. Thoroughly documents all activities and reviews all data to ensure completeness and accuracy within the CMMS. Team Collaboration: Interfaces with multi-disciplinary teams regarding laboratory equipment including, lab staff, Quality Assurance, Computer Systems Validation, Facilities and Engineering, and IT. Required Qualifications: High School Diploma and 6 years of metrology experience OR Bachelor's Degree and 2 years of metrology experience in the Pharma/Biotech industry. Experience investigating and completing CAPAs and deviations in a GxP environment. Strong understanding of calibration methodology, tolerances, and FDA regulations.
11/13/2026
Full time
Job Description Job Description Job Title: Calibration Technician III Location: Morrisville, NC 27560 Duration: 8 Months Pay Rate: $34.91/hr. The Calibration Technician manages laboratory equipment calibrations, maintenance, and repairs, ensuring compliance with all GxP regulations. This role is responsible for the quality review of documentation and the initiation of deviation investigations related to metrology. Individual works under the supervision and direction of more senior level roles and uses existing procedures to solve routine or standard problems Key Responsibilities: Calibration Execution: Independently performs maintenance, calibration, and repairs on active equipment, including loop calibrations. Reviews and approves equipment calibration and maintenance documentation performed by external vendors with a detailed eye for good documentation practices. Ensures all calibration activities comply with relevant industry regulations (e.g., USP, NIST, FDA, GLP, GMP). Safety and Quality Compliance: Adheres to all applicable written Standard Operating Procedures (SOPs), company policies, and technical guidance documents. Maintain training compliance in the Quality Management System. Initiates, writes, and assists with investigations related to instrument calibration failures or other instrument related issues. Primary responsibility for the initiation, writing, and support of investigations (Deviations/CAPAs) related to instrument calibration failures or other instrument-related issues. Vendor Management (Metrology): Oversees and manages onsite vendors to ensure all training and compliance requirements are met for maintenance, calibration, and repairs on laboratory equipment. Responsible for the technical review and approval of all equipment calibration and maintenance documentation performed by external parties with a detailed eye for good documentation practices. Asset Induction: Induction of new equipment including development of calibration requirements and schedules in coordination with equipment owners and planner / scheduler. Research the operating specifications of new equipment, obtain suitable standards, and establish the calibration acceptance criteria. Documentation: Maintains and/or generates SOPs and controlled documents pertaining to the calibration program. Thoroughly documents all activities and reviews all data to ensure completeness and accuracy within the CMMS. Team Collaboration: Interfaces with multi-disciplinary teams regarding laboratory equipment including, lab staff, Quality Assurance, Computer Systems Validation, Facilities and Engineering, and IT. Required Qualifications: High School Diploma and 6 years of metrology experience OR Bachelor's Degree and 2 years of metrology experience in the Pharma/Biotech industry. Experience investigating and completing CAPAs and deviations in a GxP environment. Strong understanding of calibration methodology, tolerances, and FDA regulations.
Job Description Job Description Job Title: Calibration/Metrology Tech II Job ID: 28090 Location: North Haven Connecticut 06473 Duration: 24 Months Pay Rate: $25.00-$30.00/hr. on W2 JOB DESCRIPTION 1) Can you please confirm your top 3 technical skills or experience required? Mechanical aptitude, any maintenance experience, any calibration experience a plus. 2) When do you plan to start interviewing? ASAP 3) Will you consider candidates working fully remote in any state or do you need someone local? Cannot be remote Responsibilities may include the following and other duties may be assigned. Calibrates electronic test measuring equipment and signal generating equipment to conform to set standards. Tests, calibrates, adjusts, and maintains electromechanical, mechanical, optical, pneumatic, hydro mechanical, and pressuretype measuring and indicating instruments. Sets up calibration sequences, methods and procedures according to detailed specifications, blueprints, drawings, and requirements. Disassembles, cleans, repairs, and replaces defective parts of test equipment such as pressure gauges and tension meters. May monitor and verify quality in accordance with statistical process or other control procedures. TECHNICIAN SUPPORT CAREER STREAM: Provides technical support in areas such as production, operations, maintenance, safety, testing, process improvement or product development. Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles, and manipulates technical data using established formulae and procedures, and performs detailed mathematical calculations. For higher levels, may suggest and/or make improvements to optimize work processes. DIFFERENTIATING FACTORS Autonomy: Established and productive individual contributor, working under moderate supervision . Performs tests, interprets data and develops reports. Organizational Impact: Performs intermediate technical activities requiring judgment and decisionmaking . Work consists of technical tasks that are typically routine. Innovation and Complexity: Technical problems faced are generally routine, but may require interpretation of procedures or policies to resolve problems . May be required to highlight areas of concerns/problems in own job area. Communication and Influence: Communicates typically with internal contacts . Obtains and provides technical information requiring some explanation or interpretation . Leadership and Talent Management: May provide guidance and assistance to new or entry level employees. Required Knowledge and Experience: Requires basic job knowledge of systems, techniques and procedures obtained through prior work experience or education. Requires minimum of 2 years of relevant experience; may require vocational or technical education or certification in addition to prior work experience.
11/13/2026
Full time
Job Description Job Description Job Title: Calibration/Metrology Tech II Job ID: 28090 Location: North Haven Connecticut 06473 Duration: 24 Months Pay Rate: $25.00-$30.00/hr. on W2 JOB DESCRIPTION 1) Can you please confirm your top 3 technical skills or experience required? Mechanical aptitude, any maintenance experience, any calibration experience a plus. 2) When do you plan to start interviewing? ASAP 3) Will you consider candidates working fully remote in any state or do you need someone local? Cannot be remote Responsibilities may include the following and other duties may be assigned. Calibrates electronic test measuring equipment and signal generating equipment to conform to set standards. Tests, calibrates, adjusts, and maintains electromechanical, mechanical, optical, pneumatic, hydro mechanical, and pressuretype measuring and indicating instruments. Sets up calibration sequences, methods and procedures according to detailed specifications, blueprints, drawings, and requirements. Disassembles, cleans, repairs, and replaces defective parts of test equipment such as pressure gauges and tension meters. May monitor and verify quality in accordance with statistical process or other control procedures. TECHNICIAN SUPPORT CAREER STREAM: Provides technical support in areas such as production, operations, maintenance, safety, testing, process improvement or product development. Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles, and manipulates technical data using established formulae and procedures, and performs detailed mathematical calculations. For higher levels, may suggest and/or make improvements to optimize work processes. DIFFERENTIATING FACTORS Autonomy: Established and productive individual contributor, working under moderate supervision . Performs tests, interprets data and develops reports. Organizational Impact: Performs intermediate technical activities requiring judgment and decisionmaking . Work consists of technical tasks that are typically routine. Innovation and Complexity: Technical problems faced are generally routine, but may require interpretation of procedures or policies to resolve problems . May be required to highlight areas of concerns/problems in own job area. Communication and Influence: Communicates typically with internal contacts . Obtains and provides technical information requiring some explanation or interpretation . Leadership and Talent Management: May provide guidance and assistance to new or entry level employees. Required Knowledge and Experience: Requires basic job knowledge of systems, techniques and procedures obtained through prior work experience or education. Requires minimum of 2 years of relevant experience; may require vocational or technical education or certification in addition to prior work experience.
Job Description Job Description Job Titles: Calibration Technician III Location: Morrisville, NC - 27560 Duration: 6 months Payrate: $30/hr - $36/hr on W2 Job Description: The Calibration Technician III manages laboratory equipment calibrations, maintenance, and repairs, ensuring compliance with all GxP regulations. This role is responsible for the quality review of documentation and the initiation of deviation investigations related to metrology. Individual works under the supervision and direction of more senior level roles and uses existing procedures to solve routine or standard problems Key Responsibilities: Calibration Execution: o Independently performs maintenance, calibration, and repairs on active equipment, including loop calibrations. o Reviews and approves equipment calibration and maintenance documentation performed by external vendors with a detailed eye for good documentation practices. o Ensures all calibration activities comply with relevant industry regulations (e.g., USP, NIST, FDA, GLP, GMP). Safety and Quality Compliance: o Adheres to all applicable written Standard Operating Procedures (SOPs), company policies, and technical guidance documents. o Maintain training compliance in the Quality Management System. o Initiates, writes, and assists with investigations related to instrument calibration failures or other instrument related issues. o Primary responsibility for the initiation, writing, and support of investigations (Deviations/CAPAs) related to instrument calibration failures or other instrument-related issues. Vendor Management (Metrology): o Oversees and manages onsite vendors to ensure all training and compliance requirements are met for maintenance, calibration, and repairs on laboratory equipment. o Responsible for the technical review and approval of all equipment calibration and maintenance documentation performed by external parties with a detailed eye for good documentation practices. Asset Induction: o Induction of new equipment including development of calibration requirements and schedules in coordination with equipment owners and planner / scheduler. o Research the operating specifications of new equipment, obtain suitable standards, and establish the calibration acceptance criteria. Documentation: o Maintains and/or generates SOPs and controlled documents pertaining to the calibration program. o Thoroughly documents all activities and reviews all data to ensure completeness and accuracy within the CMMS. Team Collaboration: o Interfaces with multi-disciplinary teams regarding laboratory equipment including, lab staff, Quality Assurance, Computer Systems Validation, Facilities and Engineering, and IT. Required Qualifications: High School Diploma and 6 years of metrology experience OR Bachelor's Degree and 2 years of metrology experience in the Pharma/Biotech industry. Experience investigating and completing CAPAs and deviations in a GxP environment. Strong understanding of calibration methodology, tolerances, and FDA regulations. If you have any questions, feel free to call me on or send an email on Thanks and Regards Akarsh Yathiraj Senior Recruiter C. D. A.611 Gateway Blvd, Ste 120 South San Francisco, CA 94080W.
11/12/2026
Full time
Job Description Job Description Job Titles: Calibration Technician III Location: Morrisville, NC - 27560 Duration: 6 months Payrate: $30/hr - $36/hr on W2 Job Description: The Calibration Technician III manages laboratory equipment calibrations, maintenance, and repairs, ensuring compliance with all GxP regulations. This role is responsible for the quality review of documentation and the initiation of deviation investigations related to metrology. Individual works under the supervision and direction of more senior level roles and uses existing procedures to solve routine or standard problems Key Responsibilities: Calibration Execution: o Independently performs maintenance, calibration, and repairs on active equipment, including loop calibrations. o Reviews and approves equipment calibration and maintenance documentation performed by external vendors with a detailed eye for good documentation practices. o Ensures all calibration activities comply with relevant industry regulations (e.g., USP, NIST, FDA, GLP, GMP). Safety and Quality Compliance: o Adheres to all applicable written Standard Operating Procedures (SOPs), company policies, and technical guidance documents. o Maintain training compliance in the Quality Management System. o Initiates, writes, and assists with investigations related to instrument calibration failures or other instrument related issues. o Primary responsibility for the initiation, writing, and support of investigations (Deviations/CAPAs) related to instrument calibration failures or other instrument-related issues. Vendor Management (Metrology): o Oversees and manages onsite vendors to ensure all training and compliance requirements are met for maintenance, calibration, and repairs on laboratory equipment. o Responsible for the technical review and approval of all equipment calibration and maintenance documentation performed by external parties with a detailed eye for good documentation practices. Asset Induction: o Induction of new equipment including development of calibration requirements and schedules in coordination with equipment owners and planner / scheduler. o Research the operating specifications of new equipment, obtain suitable standards, and establish the calibration acceptance criteria. Documentation: o Maintains and/or generates SOPs and controlled documents pertaining to the calibration program. o Thoroughly documents all activities and reviews all data to ensure completeness and accuracy within the CMMS. Team Collaboration: o Interfaces with multi-disciplinary teams regarding laboratory equipment including, lab staff, Quality Assurance, Computer Systems Validation, Facilities and Engineering, and IT. Required Qualifications: High School Diploma and 6 years of metrology experience OR Bachelor's Degree and 2 years of metrology experience in the Pharma/Biotech industry. Experience investigating and completing CAPAs and deviations in a GxP environment. Strong understanding of calibration methodology, tolerances, and FDA regulations. If you have any questions, feel free to call me on or send an email on Thanks and Regards Akarsh Yathiraj Senior Recruiter C. D. A.611 Gateway Blvd, Ste 120 South San Francisco, CA 94080W.
Job Description Job Description Description: Job Summary: This role involves performing calibrations, troubleshooting, and repairs on a wide range of electrical and mechanical Metrology & Test Equipment (M&TE) while maintaining inventory and service records. Additionally, the position requires conducting vibration testing, managing the company's ESD control plan, and supporting quality assurance audits. Qualified candidates must have at least two years of relevant experience, and knowledge of calibration and electrical theory. This is a full-time on-site position. Job Description: Perform calibration and verification measurements of Metrology & Test Equipment (M&TE). M&TE includes, among other things: signal generators, spectrum analyzers, network analyzers, oscilloscopes, power sensors, power meters, multimeters, power supplies, torque devices, thermometers, hot plates, calipers, micrometers, and height gages. Maintain a database of M&TE inventory and calibration history. Conduct impact analysis for M&TE with out-of-tolerance calibration results. Issue calibration recall reports. Troubleshoot and perform repairs on M&TE. Replace circuit board components with soldering skills. Coordinate sending M&TE out to service providers for repair and calibration. Physically retrieve M&TE from within the company for calibration. Return M&TE from calibration. Perform vibration testing using a vibration machine and accelerometers. Operate a thermal vacuum chamber (TVAC) with liquid nitrogen service. Execute and uphold the company's ESD (Electrostatic Discharge) control plan. Install, repair, test, and certify ESD protection elements. Assist in developing and improving test procedures to enhance efficiency and accuracy. Provide advice and guidance to other employees regarding the operation of M&TE. Support audits and quality assurance initiatives related to calibration and environmental testing. Maintain a clean and organized calibration laboratory. Exemplify QuinStar's Core Values-Accountability, Compassion, and Tenacity-in all tasks, ensuring that your work directly contributes to team success and company growth. Requirements: Required Skills and Qualifications: Must meet U.S. export control compliance requirements and therefore qualify as a "US Person" as defined by the federal government. 2+ years of experience operating and calibrating mechanical, electrical, and RF/microwave M&TE. Knowledge of calibration principles. Basic understanding of electrical theory. Basic algebra math skills. Excellent analytical and problem-solving skills with attention to detail. High school diploma or equivalent. Possess the ability to work independently and in a team environment. Possess effective verbal and written communication skills. Proficient in Microsoft Excel. Desired Competencies: Maintains an active ASQ CCT (Certified Calibration Technician) Certification Basic soldering skills. Experience with vibration testing. Familiar with waveguide bands and waveguide assembly. Familiar with RF/microwave interconnects up to 110 GHz. Proficient in Microsoft Word and Outlook. Have an active security clearance. Physical Requirements: Stay in a stationary position for an extended period of time. Move equipment weighing up to 60 pounds, unassisted, over a short distance (1 meter). Arrange and organize laboratory equipment at various shelf heights. Perform tasks at various heights, including working in low positions such as under a table (to install or repair wiring). Use/work on small parts or tools for an extended period of time. Work continuously using a microscope. QuinStar Technology, Inc. is an equal opportunity employer. Employment is contingent upon successfully passing a pre-employment physical, drug screen, background check, and proof of eligibility to work in the U.S. Employee Signature: Date: _
11/12/2026
Full time
Job Description Job Description Description: Job Summary: This role involves performing calibrations, troubleshooting, and repairs on a wide range of electrical and mechanical Metrology & Test Equipment (M&TE) while maintaining inventory and service records. Additionally, the position requires conducting vibration testing, managing the company's ESD control plan, and supporting quality assurance audits. Qualified candidates must have at least two years of relevant experience, and knowledge of calibration and electrical theory. This is a full-time on-site position. Job Description: Perform calibration and verification measurements of Metrology & Test Equipment (M&TE). M&TE includes, among other things: signal generators, spectrum analyzers, network analyzers, oscilloscopes, power sensors, power meters, multimeters, power supplies, torque devices, thermometers, hot plates, calipers, micrometers, and height gages. Maintain a database of M&TE inventory and calibration history. Conduct impact analysis for M&TE with out-of-tolerance calibration results. Issue calibration recall reports. Troubleshoot and perform repairs on M&TE. Replace circuit board components with soldering skills. Coordinate sending M&TE out to service providers for repair and calibration. Physically retrieve M&TE from within the company for calibration. Return M&TE from calibration. Perform vibration testing using a vibration machine and accelerometers. Operate a thermal vacuum chamber (TVAC) with liquid nitrogen service. Execute and uphold the company's ESD (Electrostatic Discharge) control plan. Install, repair, test, and certify ESD protection elements. Assist in developing and improving test procedures to enhance efficiency and accuracy. Provide advice and guidance to other employees regarding the operation of M&TE. Support audits and quality assurance initiatives related to calibration and environmental testing. Maintain a clean and organized calibration laboratory. Exemplify QuinStar's Core Values-Accountability, Compassion, and Tenacity-in all tasks, ensuring that your work directly contributes to team success and company growth. Requirements: Required Skills and Qualifications: Must meet U.S. export control compliance requirements and therefore qualify as a "US Person" as defined by the federal government. 2+ years of experience operating and calibrating mechanical, electrical, and RF/microwave M&TE. Knowledge of calibration principles. Basic understanding of electrical theory. Basic algebra math skills. Excellent analytical and problem-solving skills with attention to detail. High school diploma or equivalent. Possess the ability to work independently and in a team environment. Possess effective verbal and written communication skills. Proficient in Microsoft Excel. Desired Competencies: Maintains an active ASQ CCT (Certified Calibration Technician) Certification Basic soldering skills. Experience with vibration testing. Familiar with waveguide bands and waveguide assembly. Familiar with RF/microwave interconnects up to 110 GHz. Proficient in Microsoft Word and Outlook. Have an active security clearance. Physical Requirements: Stay in a stationary position for an extended period of time. Move equipment weighing up to 60 pounds, unassisted, over a short distance (1 meter). Arrange and organize laboratory equipment at various shelf heights. Perform tasks at various heights, including working in low positions such as under a table (to install or repair wiring). Use/work on small parts or tools for an extended period of time. Work continuously using a microscope. QuinStar Technology, Inc. is an equal opportunity employer. Employment is contingent upon successfully passing a pre-employment physical, drug screen, background check, and proof of eligibility to work in the U.S. Employee Signature: Date: _