Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Assembler, who works under the direction of the Production Supervisor is responsible for producing parts by assembling parts and subassemblies by hand or with simple machinery. Essential Duties and Responsibilities : The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Follow work instructions and/or route sheets, assemble and/or pack products for various departments. Inspect machine at beginning of shift and notates on check sheet. Clean and/or lubricate machinery as required. Inspect and place parts in designated trays. Meet specified quantity and quality guidelines. Maintain equipment in a clean and orderly condition. Reports faulty operation or defective material to supervisor Conducts visual quality inspections Ability to place product in container while on different types of work surfaces, such as slick or slippery, and on different levels. Monitor machines Ability to work in a fast-paced environment. Ability to work in different environments such as a slick work surface, climbing steps to retrieve product in a machine. Ability to work with heavy machinery (Milling Machines, Injection Molding, Etc.) Ability to work in dimly lit areas. Requirements: High school diploma or equivalent. One to three months related experience and/or training. Manual dexterity and ability to use various machines. Attention to detail. Ability to read a limited number of two-and three syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using weight measurement. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Basic computer skills. Basic problem solving or troubleshooting skills. Ability to work with a team. Physical Activity/Mode: Climbing, balancing, stooping, kneeling, crouching, crawling, walking, standing, lifting, reaching, pulling, fingering, grasping, talking, hearing. Heavy work: exerting up to 100 pounds of force frequently and/or up to 20 pounds of force constantly to move objects. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI91abcacd970c-9226
11/03/2025
Full time
Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Assembler, who works under the direction of the Production Supervisor is responsible for producing parts by assembling parts and subassemblies by hand or with simple machinery. Essential Duties and Responsibilities : The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Follow work instructions and/or route sheets, assemble and/or pack products for various departments. Inspect machine at beginning of shift and notates on check sheet. Clean and/or lubricate machinery as required. Inspect and place parts in designated trays. Meet specified quantity and quality guidelines. Maintain equipment in a clean and orderly condition. Reports faulty operation or defective material to supervisor Conducts visual quality inspections Ability to place product in container while on different types of work surfaces, such as slick or slippery, and on different levels. Monitor machines Ability to work in a fast-paced environment. Ability to work in different environments such as a slick work surface, climbing steps to retrieve product in a machine. Ability to work with heavy machinery (Milling Machines, Injection Molding, Etc.) Ability to work in dimly lit areas. Requirements: High school diploma or equivalent. One to three months related experience and/or training. Manual dexterity and ability to use various machines. Attention to detail. Ability to read a limited number of two-and three syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using weight measurement. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Basic computer skills. Basic problem solving or troubleshooting skills. Ability to work with a team. Physical Activity/Mode: Climbing, balancing, stooping, kneeling, crouching, crawling, walking, standing, lifting, reaching, pulling, fingering, grasping, talking, hearing. Heavy work: exerting up to 100 pounds of force frequently and/or up to 20 pounds of force constantly to move objects. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI91abcacd970c-9226
Join the magic behind the scenes at the Walt Disney Company as a Principal Manufacturing Engineer (internally known as Principal Quality Engineer). In this dynamic role, you'll collaborate with cross-functional teams to sustain high standards of safety, quality, efficiency and continuous improvement in the manufacturing, overhaul, and refurbishment of attractions (i.e. ride vehicles and components). You'll play a key part in providing magical guest experiences by supporting engineering projects from concept through production, installation, and sustainment (maintenance). This is a 100% onsite position supporting the Disneyland Resort in Anaheim, CA. Responsibilities/You Will: Oversee the qualification and manage relationships with key suppliers of attraction parts and assemblies, ensuring compliance with Walt Disney Company requirements along with industry (i.e. ASTM/ISO) requirements. This includes pursuing corrective actions and improvement opportunities. Collaborate with engineering, planning, and quality assurance teams to develop and review technical requirements, drawings, and job plans for new and existing attractions. Support manufacturing projects for attractions and facilities, including machining, welding, casting, inspection and assembly of mechanical components. Coordinate with internal and external partners to resolve technical challenges, expedite orders, and manage project timelines. Support the attraction vehicle overhaul program, including inspection and documentation of parts and assemblies and periodic audits. Maintain accurate records and documentation in systems ensuring traceability and compliance. Participate in the recruitment, training, and development of cast members and engineering staff, fostering a culture of safety, teamwork, and continuous improvement. Drive process improvements and implement best practices in manufacturing, fabrication, and inspection, including root cause analysis and corrective actions. Basic Qualifications/You Will Have: 5 years of experience in the qualification and monitoring of supplier quality in highly regulated industries. Experience in developing and sustaining Quality Plans which includes Component Inspection Plans and Assembly Job Plans (work instructions). Experience in manufacturing, machining, casting, welding, and inspection processes. Knowledge of NDT inspection processes such as Visual Testing (i.e. dimensional inspection), Magnetic Particle Inspection, Penetrant Testing, Ultrasonic Testing, and Radiographic. Working knowledge of Microsoft Office applications including Copilot and related documentation systems. Strong communication, collaboration, and project management skills. Preferred Qualifications Experience in the theme park, entertainment, automotive, or aerospace industries. Familiarity with ASTM Committee F24, ASTM F1193, ASTM F893, and ISO 9001 standards and California Subchapter 6.2 Permanent Amusement Ride Safety Orders. Demonstrated ability to lead cross-functional teams and drive process improvements. ASQ Certifications in Quality Engineering, Quality Auditing, Six Sigma, Quality Management, Supplier Quality. Required Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field. Additional Information Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at The hiring range for this position in Anaheim, CA is $139,200.00 to $186,600.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
11/03/2025
Full time
Join the magic behind the scenes at the Walt Disney Company as a Principal Manufacturing Engineer (internally known as Principal Quality Engineer). In this dynamic role, you'll collaborate with cross-functional teams to sustain high standards of safety, quality, efficiency and continuous improvement in the manufacturing, overhaul, and refurbishment of attractions (i.e. ride vehicles and components). You'll play a key part in providing magical guest experiences by supporting engineering projects from concept through production, installation, and sustainment (maintenance). This is a 100% onsite position supporting the Disneyland Resort in Anaheim, CA. Responsibilities/You Will: Oversee the qualification and manage relationships with key suppliers of attraction parts and assemblies, ensuring compliance with Walt Disney Company requirements along with industry (i.e. ASTM/ISO) requirements. This includes pursuing corrective actions and improvement opportunities. Collaborate with engineering, planning, and quality assurance teams to develop and review technical requirements, drawings, and job plans for new and existing attractions. Support manufacturing projects for attractions and facilities, including machining, welding, casting, inspection and assembly of mechanical components. Coordinate with internal and external partners to resolve technical challenges, expedite orders, and manage project timelines. Support the attraction vehicle overhaul program, including inspection and documentation of parts and assemblies and periodic audits. Maintain accurate records and documentation in systems ensuring traceability and compliance. Participate in the recruitment, training, and development of cast members and engineering staff, fostering a culture of safety, teamwork, and continuous improvement. Drive process improvements and implement best practices in manufacturing, fabrication, and inspection, including root cause analysis and corrective actions. Basic Qualifications/You Will Have: 5 years of experience in the qualification and monitoring of supplier quality in highly regulated industries. Experience in developing and sustaining Quality Plans which includes Component Inspection Plans and Assembly Job Plans (work instructions). Experience in manufacturing, machining, casting, welding, and inspection processes. Knowledge of NDT inspection processes such as Visual Testing (i.e. dimensional inspection), Magnetic Particle Inspection, Penetrant Testing, Ultrasonic Testing, and Radiographic. Working knowledge of Microsoft Office applications including Copilot and related documentation systems. Strong communication, collaboration, and project management skills. Preferred Qualifications Experience in the theme park, entertainment, automotive, or aerospace industries. Familiarity with ASTM Committee F24, ASTM F1193, ASTM F893, and ISO 9001 standards and California Subchapter 6.2 Permanent Amusement Ride Safety Orders. Demonstrated ability to lead cross-functional teams and drive process improvements. ASQ Certifications in Quality Engineering, Quality Auditing, Six Sigma, Quality Management, Supplier Quality. Required Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field. Additional Information Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at The hiring range for this position in Anaheim, CA is $139,200.00 to $186,600.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments. Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required . "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military. 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions. 1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals. Ability to lift up to 35lbs. Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5"X17.7". Proficiency in reading, writing, and speaking English. Preferred Qualifications : 1+ years of experience performing aircraft structural work or equivalate. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift : This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities . The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work . The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations . Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Summary pay range : $26.32 - $56.36 Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
11/01/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments. Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required . "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military. 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions. 1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals. Ability to lift up to 35lbs. Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5"X17.7". Proficiency in reading, writing, and speaking English. Preferred Qualifications : 1+ years of experience performing aircraft structural work or equivalate. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift : This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities . The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work . The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations . Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Summary pay range : $26.32 - $56.36 Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
What you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Experienced Technicians can earn $38.99/ hour including Master Certification $3,500 in bonuses Tool allowance of $400 per quarter Company-provided uniforms This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance What you'll do on a typical day: Schedule and supervise shop personnel Order parts and manage vendors Ensure technicians receive the required training Perform routine maintenance functions and adjustments on all types of class 7 and 8 diesel equipment, forklifts and trailing equipment in compliance with the manufacturer's and company's schedules Safely access any area of the equipment or vehicle to perform necessary maintenance, including inspecting and performing work in, on or under parts of vehicles and trailers Apply knowledge of and work by the Department of Transportation (DOT), Environmental Protection Agency (EPA), Interstate Authority and the Occupational Safety and Health Administration (OSHA); follow all rules, regulations, policies and procedures, and lead your team to do the same Repair or rebuild all or parts of various equipment systems Move trailers throughout the property Operate a hostler in all types of weather; safely walk and stand for extended periods Lead Technicians are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. And occasionally greater than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
11/01/2025
Full time
What you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Experienced Technicians can earn $38.99/ hour including Master Certification $3,500 in bonuses Tool allowance of $400 per quarter Company-provided uniforms This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance What you'll do on a typical day: Schedule and supervise shop personnel Order parts and manage vendors Ensure technicians receive the required training Perform routine maintenance functions and adjustments on all types of class 7 and 8 diesel equipment, forklifts and trailing equipment in compliance with the manufacturer's and company's schedules Safely access any area of the equipment or vehicle to perform necessary maintenance, including inspecting and performing work in, on or under parts of vehicles and trailers Apply knowledge of and work by the Department of Transportation (DOT), Environmental Protection Agency (EPA), Interstate Authority and the Occupational Safety and Health Administration (OSHA); follow all rules, regulations, policies and procedures, and lead your team to do the same Repair or rebuild all or parts of various equipment systems Move trailers throughout the property Operate a hostler in all types of weather; safely walk and stand for extended periods Lead Technicians are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. And occasionally greater than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
What you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Experienced Technicians can earn $39.99/ hour including Master Certification and shift differential. 2nd Shift, 3:00pm-11:30pm Monday - Friday Company-provided uniforms Tool allowance of $400 per quarter This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance What you'll do on a typical day: Schedule and supervise shop personnel Order parts and manage vendors Ensure technicians receive the required training Perform routine maintenance functions and adjustments on all types of class 7 and 8 diesel equipment, forklifts and trailing equipment in compliance with the manufacturer's and company's schedules Safely access any area of the equipment or vehicle to perform necessary maintenance, including inspecting and performing work in, on or under parts of vehicles and trailers Apply knowledge of and work by the Department of Transportation (DOT), Environmental Protection Agency (EPA), Interstate Authority and the Occupational Safety and Health Administration (OSHA); follow all rules, regulations, policies and procedures, and lead your team to do the same Repair or rebuild all or parts of various equipment systems Move trailers throughout the property Operate a hostler in all types of weather; safely walk and stand for extended periods Lead Technicians are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. And occasionally greater than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
11/01/2025
Full time
What you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Experienced Technicians can earn $39.99/ hour including Master Certification and shift differential. 2nd Shift, 3:00pm-11:30pm Monday - Friday Company-provided uniforms Tool allowance of $400 per quarter This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance What you'll do on a typical day: Schedule and supervise shop personnel Order parts and manage vendors Ensure technicians receive the required training Perform routine maintenance functions and adjustments on all types of class 7 and 8 diesel equipment, forklifts and trailing equipment in compliance with the manufacturer's and company's schedules Safely access any area of the equipment or vehicle to perform necessary maintenance, including inspecting and performing work in, on or under parts of vehicles and trailers Apply knowledge of and work by the Department of Transportation (DOT), Environmental Protection Agency (EPA), Interstate Authority and the Occupational Safety and Health Administration (OSHA); follow all rules, regulations, policies and procedures, and lead your team to do the same Repair or rebuild all or parts of various equipment systems Move trailers throughout the property Operate a hostler in all types of weather; safely walk and stand for extended periods Lead Technicians are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. And occasionally greater than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
Overview: SEEKING EXPERIENCED AUTO PROS! MARKET LEADING PAY PLUS BONUS SOUTH POINT CJDR is part of the fast growing Group 1 Automotive, a leader in automotive retail and service. We are growing and looking for Experienced Automotive Service Technicians/Mechanics to work with our Quality Dealership , representing a Quality Product! Our Service Technicians should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees. We offer: Market Leading Pay that could be up to $10 per hour more than your current rate (based on a recent pay stub, your technical qualifications, OEM or ASE certifications, experience and work history), plus bonuses. A Great Working Environment with the Latest Equipment Structured, Self-paced and Paid Training Opportunities Leading to Manufacturer and Group 1 Recognition Health, Dental & Vision Insurance Life and Disability Insurance 401(k) with company match Paid Time-off Employee Vehicle Purchase Program Employee Stock Purchase Plan 4 Day Work Week You need Automotive Technician/Mechanic Experience A Love of Everything Automotive A Positive & Friendly Attitude Tools Based on your Experience Communication Skills Basic Computer Skills Strong Desire to Provide an Exceptional Client Experience Ability to Achieve Targeted Goals High School Diploma or Equivalent Must have a Valid Driver's License Group 1 Automotive , a Fortune 250 company, that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend! See dealership for details All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment Group 1 Automotive is an Equal Employment Opportunity employer and participates in E-Verify IND1
11/01/2025
Full time
Overview: SEEKING EXPERIENCED AUTO PROS! MARKET LEADING PAY PLUS BONUS SOUTH POINT CJDR is part of the fast growing Group 1 Automotive, a leader in automotive retail and service. We are growing and looking for Experienced Automotive Service Technicians/Mechanics to work with our Quality Dealership , representing a Quality Product! Our Service Technicians should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees. We offer: Market Leading Pay that could be up to $10 per hour more than your current rate (based on a recent pay stub, your technical qualifications, OEM or ASE certifications, experience and work history), plus bonuses. A Great Working Environment with the Latest Equipment Structured, Self-paced and Paid Training Opportunities Leading to Manufacturer and Group 1 Recognition Health, Dental & Vision Insurance Life and Disability Insurance 401(k) with company match Paid Time-off Employee Vehicle Purchase Program Employee Stock Purchase Plan 4 Day Work Week You need Automotive Technician/Mechanic Experience A Love of Everything Automotive A Positive & Friendly Attitude Tools Based on your Experience Communication Skills Basic Computer Skills Strong Desire to Provide an Exceptional Client Experience Ability to Achieve Targeted Goals High School Diploma or Equivalent Must have a Valid Driver's License Group 1 Automotive , a Fortune 250 company, that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend! See dealership for details All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment Group 1 Automotive is an Equal Employment Opportunity employer and participates in E-Verify IND1
Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Assembler, who works under the direction of the Production Supervisor is responsible for producing parts by assembling parts and subassemblies by hand or with simple machinery. Essential Duties and Responsibilities : The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Follow work instructions and/or route sheets, assemble and/or pack products for various departments. Inspect machine at beginning of shift and notates on check sheet. Clean and/or lubricate machinery as required. Inspect and place parts in designated trays. Meet specified quantity and quality guidelines. Maintain equipment in a clean and orderly condition. Reports faulty operation or defective material to supervisor Conducts visual quality inspections Ability to place product in container while on different types of work surfaces, such as slick or slippery, and on different levels. Monitor machines Ability to work in a fast-paced environment. Ability to work in different environments such as a slick work surface, climbing steps to retrieve product in a machine. Ability to work with heavy machinery (Milling Machines, Injection Molding, Etc.) Ability to work in dimly lit areas. Requirements: High school diploma or equivalent. One to three months related experience and/or training. Manual dexterity and ability to use various machines. Attention to detail. Ability to read a limited number of two-and three syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using weight measurement. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Basic computer skills. Basic problem solving or troubleshooting skills. Ability to work with a team. Physical Activity/Mode: Climbing, balancing, stooping, kneeling, crouching, crawling, walking, standing, lifting, reaching, pulling, fingering, grasping, talking, hearing. Heavy work: exerting up to 100 pounds of force frequently and/or up to 20 pounds of force constantly to move objects. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI83f3aa79b5-
11/01/2025
Full time
Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Assembler, who works under the direction of the Production Supervisor is responsible for producing parts by assembling parts and subassemblies by hand or with simple machinery. Essential Duties and Responsibilities : The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Follow work instructions and/or route sheets, assemble and/or pack products for various departments. Inspect machine at beginning of shift and notates on check sheet. Clean and/or lubricate machinery as required. Inspect and place parts in designated trays. Meet specified quantity and quality guidelines. Maintain equipment in a clean and orderly condition. Reports faulty operation or defective material to supervisor Conducts visual quality inspections Ability to place product in container while on different types of work surfaces, such as slick or slippery, and on different levels. Monitor machines Ability to work in a fast-paced environment. Ability to work in different environments such as a slick work surface, climbing steps to retrieve product in a machine. Ability to work with heavy machinery (Milling Machines, Injection Molding, Etc.) Ability to work in dimly lit areas. Requirements: High school diploma or equivalent. One to three months related experience and/or training. Manual dexterity and ability to use various machines. Attention to detail. Ability to read a limited number of two-and three syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using weight measurement. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Basic computer skills. Basic problem solving or troubleshooting skills. Ability to work with a team. Physical Activity/Mode: Climbing, balancing, stooping, kneeling, crouching, crawling, walking, standing, lifting, reaching, pulling, fingering, grasping, talking, hearing. Heavy work: exerting up to 100 pounds of force frequently and/or up to 20 pounds of force constantly to move objects. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI83f3aa79b5-
What you'll need to succeed as a Diesel Mechanic at XPO Minimum qualifications: 2 years of experience in tractor and trailer inspection and repair or a technical school degree with certification in heavy-duty truck/trailer maintenance Obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) A valid driver's license Basic welding skills (Oxy/Acetylene, MIG and ARC) and mechanical skills Basic hand tools required for heavy-duty trailer and tractor maintenance Basic computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Previous or current ASE certifications Diesel tech school diploma Experience with trailer repair, diesel engine system diagnostics and preventive maintenance for tractor technicians Able to diagnose and repair vehicle air conditioning systems About the Diesel Mechanic job Pay, benefits and more: Experienced Technicians can earn up to $41.01/ hour including Master Certification and shift differential. Monday - Friday operation Night Shift, 11:00PM-7:30AM Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on all types of class 6 through 8 diesel equipment, forklifts, and trailing equipment Access any of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under part of the equipment Repair or rebuild all or parts of various equipment systems Troubleshoot and diagnose equipment and component issues and perform repairs accordingly Perform HVAC system repairs Abide by DOT, EPA, Interstate Authority, OSHA and other rules and regulations Conduct safety inspections on equipment and prepare safety documentation as needed Maintain proficiency with equipment and technologies that enhance productivity Move trailers throughout the property, operating a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Diesel Mechanics are required to: Frequently lift up to 50 lbs. and occasionally lift more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
11/01/2025
Full time
What you'll need to succeed as a Diesel Mechanic at XPO Minimum qualifications: 2 years of experience in tractor and trailer inspection and repair or a technical school degree with certification in heavy-duty truck/trailer maintenance Obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) A valid driver's license Basic welding skills (Oxy/Acetylene, MIG and ARC) and mechanical skills Basic hand tools required for heavy-duty trailer and tractor maintenance Basic computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Previous or current ASE certifications Diesel tech school diploma Experience with trailer repair, diesel engine system diagnostics and preventive maintenance for tractor technicians Able to diagnose and repair vehicle air conditioning systems About the Diesel Mechanic job Pay, benefits and more: Experienced Technicians can earn up to $41.01/ hour including Master Certification and shift differential. Monday - Friday operation Night Shift, 11:00PM-7:30AM Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on all types of class 6 through 8 diesel equipment, forklifts, and trailing equipment Access any of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under part of the equipment Repair or rebuild all or parts of various equipment systems Troubleshoot and diagnose equipment and component issues and perform repairs accordingly Perform HVAC system repairs Abide by DOT, EPA, Interstate Authority, OSHA and other rules and regulations Conduct safety inspections on equipment and prepare safety documentation as needed Maintain proficiency with equipment and technologies that enhance productivity Move trailers throughout the property, operating a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Diesel Mechanics are required to: Frequently lift up to 50 lbs. and occasionally lift more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to join our Joint and Installation team in Everett and Kent, Washington. Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies. Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation. Perform drilling, reaming, riveting, and soldering necessary for assembly tasks. Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations. Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects. Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools. Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts. Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment. Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications. Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications. Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications. Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies. Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection. Maintain personal and tool certifications, ensuring compliance with safety and operational standards. Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications : 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military. 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Ability to lift up to 35 pounds. This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times. Preferred Qualifications: 1+ years of experience performing aircraft structural work or equivalate. 1+ years of experience using high impact vibratory tools; such as bucking/riveting. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program Typical Education & Experience: High school graduate or GED preferred. Relocation : Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Safety Sensitive Statement: This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing. Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range : $24.32 - $53.30 per hour Applications for this position will be accepted until Apr. 24, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
11/01/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to join our Joint and Installation team in Everett and Kent, Washington. Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies. Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation. Perform drilling, reaming, riveting, and soldering necessary for assembly tasks. Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations. Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects. Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools. Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts. Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment. Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications. Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications. Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications. Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies. Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection. Maintain personal and tool certifications, ensuring compliance with safety and operational standards. Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications : 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military. 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Ability to lift up to 35 pounds. This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times. Preferred Qualifications: 1+ years of experience performing aircraft structural work or equivalate. 1+ years of experience using high impact vibratory tools; such as bucking/riveting. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program Typical Education & Experience: High school graduate or GED preferred. Relocation : Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Safety Sensitive Statement: This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing. Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range : $24.32 - $53.30 per hour Applications for this position will be accepted until Apr. 24, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
What you'll need to succeed as a Trailer Mechanic at XPO Minimum qualifications: 1 year of verifiable experience in heavy-duty maintenance and/or time in an entry-level Technician role A valid driver's license Able to perform safety inspections of equipment and prepare safety documentation Basic computer skills Available to work a variety of shifts, including days, evenings, nights and weekends Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 369.25 Vehicle Inspection qualified in the Federal Motor Carrier Safety Administration regulations, Section 369.19 Basic hand tools required for heavy-duty trailer maintenance Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Diesel tech school diploma Previous or current ASE certifications Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Trailer Mechanic job Pay, benefits and more: Experienced Trailer Mechanics can earn up to $34.75/ hour including shift differential. Night Shift, Monday-Friday, 9:30PM-5:30AM Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on trailing equipment, in compliance with the manufacturers, DOT, and company schedules Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of trailers Repair or rebuild all or part of equipment systems Abide by DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA) and other rules and regulations Maintain proficiency in equipment and technologies that enhance our productivity Move trailers throughout the property, and operate a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Trailer Mechanics are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. and occasionally more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
11/01/2025
Full time
What you'll need to succeed as a Trailer Mechanic at XPO Minimum qualifications: 1 year of verifiable experience in heavy-duty maintenance and/or time in an entry-level Technician role A valid driver's license Able to perform safety inspections of equipment and prepare safety documentation Basic computer skills Available to work a variety of shifts, including days, evenings, nights and weekends Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 369.25 Vehicle Inspection qualified in the Federal Motor Carrier Safety Administration regulations, Section 369.19 Basic hand tools required for heavy-duty trailer maintenance Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Diesel tech school diploma Previous or current ASE certifications Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Trailer Mechanic job Pay, benefits and more: Experienced Trailer Mechanics can earn up to $34.75/ hour including shift differential. Night Shift, Monday-Friday, 9:30PM-5:30AM Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on trailing equipment, in compliance with the manufacturers, DOT, and company schedules Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of trailers Repair or rebuild all or part of equipment systems Abide by DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA) and other rules and regulations Maintain proficiency in equipment and technologies that enhance our productivity Move trailers throughout the property, and operate a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Trailer Mechanics are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. and occasionally more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
University of California Santa Cruz
Santa Cruz, California
Heavy Duty Equipment Technician ABOUT UC SANTA CRUZ UC Santa Cruz is a public university like no other in California, combining the experience of a small, liberal arts college with the depth and rigor of a major research university. It's known as an unconventional place where innovation and experimentation is part of the campus's DNA. That playful, bold spirit still thrives today, all on a campus renowned as among the most beautiful in the world. DEPARTMENT OVERVIEW Physical Planning, Development & Operations (PPDO) manages and oversees all University activities and services related to physical and environmental planning, design and construction, engineering, physical plant maintenance and operations, capital planning and space management, and the associated business services necessary to support these functions. The University's main campus is spread across more than 2,000 acres and includes over 500 buildings comprising more than 8 million square feet. The department includes operating budgets of over $48 million, manages a capital project portfolio of approximately $500 million, and employs nearly 300 full-time staff to carry forth the duties necessary for the campus' development and operation. JOB SUMMARY Under the direction of the Fleet Services Technical Staff Supervisor, the Heavy-Duty Equipment Technician performs operational level heavy duty vehicular and equipment maintenance and repair duties. The Heavy Duty Equipment Technician inspects, maintains, repairs, diagnoses, adjusts, and replaces mechanical and electrical components on University-owned vehicles and equipment. Vehicles and equipment maintained include passenger sedans, light duty trucks, vans (both passenger and cargo), medium duty and heavy duty trucks, fire and police vehicles, passenger transport buses, tractors and landscape maintenance equipment, street sweepers, standby generators (1-kw to 150-kw), and other vehicles and equipment used in the day to day operations of the University. Systems and sub-systems maintained and repaired include but are not limited to the following: engine, transmission, ignition, fuel delivery, charging and starting, exhaust, electrical, drive-train, braking systems (both hydraulic and air actuated), air comfort, steering, suspension, and hydraulic systems. The incumbent will also perform fabrication and welding duties, operate and maintain shop tools and equipment, and document work performed. Additional duties include TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and shearing of various metals, including steel, aluminum, stainless steel, and cast aluminum. APPOINTMENT INFORMATION Budgeted Salary: $40.27-$50.09/hourly. Salary commensurate with skills, qualifications and experience. Under California law, the University of California, Santa Cruz is required to post a reasonable estimate of the compensation for this role. The salary shown above is the budgeted amount the University reasonably expects to pay and the salary extended should not exceed this posted amount. Benefits Level Eligibility: Full benefits Schedule Information: • Full-time, Fixed • Percentage of Time: 100%, 40 Hours per Week • Days of the Week: Mon-Fri • Shift Includes: Day Employee Classification: Career appointment Job End Date: None Work Location: UC Santa Cruz Main Campus Union Representation: Service Employees (SX) Job Code Classification: HVY DUTY EQUIP TCHN (008476) Travel: Never or Rarely JOB DUTIES 65% - Maintenance/Repair/Metal Fabrication • Performs or assists other Heavy-Duty Equipment Technicians and Automotive Technicians in major repair and maintenance of automotive and heavy-duty vehicles and equipment, including major system overhauls. • Maintains and repairs emission control systems to ensure conformity to all local, state, and Federal emission regulations. • Performs maintenance and repair to vehicles and equipment operating on gasoline, diesel motor fuel, propane, compressed natural gas, and electric-powered vehicles and equipment. • Reads and interprets basic blueprints and executes metal fabrication projects as directed. 15% - Diagnostic • Inspects automotive and heavy equipment to determine corrective action necessary. • Performs drivability diagnosis of computer-controlled systems. • Performs repairs in the most cost-efficient manner possible. 10% - Equipment Operation • Operates vehicles and equipment during the course of maintenance and repair. • Utilizes engine analyzers, emission analyzers. • Operates shop tools and equipment, operate welding and fabrication equipment. 10% - Record Keeping • Prepares maintenance and repair records. • Prepares work orders that accurately reflect time and materials used in the course of repairs. REQUIRED QUALIFICATIONS • Journeyman level experience and skill in automotive heavy vehicle and equipment maintenance and repair. • Experience in the operation and maintenance of tools and special tools used in the course of performing job duties. • Ability to perform welding and fabrication operations required in the course of performing job duties. • Knowledge in the proper use and operation of diagnostic equipment used in the course of performing job duties. • Ability to properly inspect vehicles and equipment for needed maintenance and repairs, and to perform those maintenance and repair operations. • Ability to safely operate University owned vehicles and equipment. • Ability to work both individually and cooperatively with others with minimal or no supervision. • Ability to identify and correct hazardous conditions and to exercise good judgment when to report unsafe and hazardous conditions. • Ability to prioritize work assignments to meet deadlines, flexibility to work with changing workloads and deadlines, good customer service skills and the ability to work with interruptions. • Good interpersonal skills to effectively interact with coworkers and the ability to exercise diplomacy in dealing with diverse groups of people. PREFERRED QUALIFICATIONS • Demonstrated experience completing advanced welding and fabrication projects such as TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and sheering of various metals including but not limited to steel, aluminum, stainless steel, and cast aluminum. SPECIAL CONDITIONS OF EMPLOYMENT • Selected candidate will be required to pass a pre-employment criminal history background check. • Selected candidate must pass the employment misconduct disclosure process. • Must possess a valid license to drive in the state of California and be able to participate in the Department of Motor Vehicles (DMV) pull notice program. • Must possess a valid Class B Commercial license to drive in the State of California, with passenger endorsement and a satisfactory driving record. License must not be restricted to vehicles 15 passengers or less including the driver, but must certify individual to drive passenger vehicles weighing more than 26, 001 gross vehicle weight rating (GVWR) and carrying 20 passengers or more including the driver (DMV CLASS B LICENSE WITH PASSENGER ENDORSEMENT). • Must possess, or obtain within 6 months of hire, a valid California Class B license to drive and participate in the Department of Motor Vehicles (DMV) pull notice program. Must participate in DOT drug testing program. • Ability to safely lift parts, components and supplies while bending, kneeling or stooping with or without accommodation. • Ability to safely push and move equipment weighing up to 160 pounds with or without accommodation. • Must have the ability to: operate a vacuum, floor scrubber, and polisher; use cleaning chemical compounds; perform essential custodial duties including dumping bags into dumpster or moving equipment and materials with or without accommodations. • Ability to occasionally work overtime with little or no advance notice, and work on-call to respond to emergencies after hours as necessary for emergency repairs. • Ability to work shift work, 6AM to 2:30PM. • Ability to work overtime including evenings, nights, weekends and holidays to meet operational needs, and work an alternate work schedule shift as required. • The University of California has implemented a covering all employees. Employees, including new hires, are required to comply with any applicable policies relating to the University of California vaccine program. • Per the Child Abuse and Neglect Reporting Act (CANRA), this position has been identified as a Mandated Reporter. The selected candidate will be required to report known or suspected child abuse or neglect as defined by CANRA and will be required to sign a Statement Acknowledging Requirement to Report Child Abuse prior to commencing employment. CANRA Penal Codes, and related definitions, requirements, and responsibilities may be obtained: leginfo.legislature.ca.gov/faces/codes_displayText.xhtml?lawCode=PEN&division=&title=1.∂=4.&chapter=2.&article=2.5. MISCONDUCT DISCLOSURE REQUIREMENT . click apply for full job details
11/01/2025
Full time
Heavy Duty Equipment Technician ABOUT UC SANTA CRUZ UC Santa Cruz is a public university like no other in California, combining the experience of a small, liberal arts college with the depth and rigor of a major research university. It's known as an unconventional place where innovation and experimentation is part of the campus's DNA. That playful, bold spirit still thrives today, all on a campus renowned as among the most beautiful in the world. DEPARTMENT OVERVIEW Physical Planning, Development & Operations (PPDO) manages and oversees all University activities and services related to physical and environmental planning, design and construction, engineering, physical plant maintenance and operations, capital planning and space management, and the associated business services necessary to support these functions. The University's main campus is spread across more than 2,000 acres and includes over 500 buildings comprising more than 8 million square feet. The department includes operating budgets of over $48 million, manages a capital project portfolio of approximately $500 million, and employs nearly 300 full-time staff to carry forth the duties necessary for the campus' development and operation. JOB SUMMARY Under the direction of the Fleet Services Technical Staff Supervisor, the Heavy-Duty Equipment Technician performs operational level heavy duty vehicular and equipment maintenance and repair duties. The Heavy Duty Equipment Technician inspects, maintains, repairs, diagnoses, adjusts, and replaces mechanical and electrical components on University-owned vehicles and equipment. Vehicles and equipment maintained include passenger sedans, light duty trucks, vans (both passenger and cargo), medium duty and heavy duty trucks, fire and police vehicles, passenger transport buses, tractors and landscape maintenance equipment, street sweepers, standby generators (1-kw to 150-kw), and other vehicles and equipment used in the day to day operations of the University. Systems and sub-systems maintained and repaired include but are not limited to the following: engine, transmission, ignition, fuel delivery, charging and starting, exhaust, electrical, drive-train, braking systems (both hydraulic and air actuated), air comfort, steering, suspension, and hydraulic systems. The incumbent will also perform fabrication and welding duties, operate and maintain shop tools and equipment, and document work performed. Additional duties include TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and shearing of various metals, including steel, aluminum, stainless steel, and cast aluminum. APPOINTMENT INFORMATION Budgeted Salary: $40.27-$50.09/hourly. Salary commensurate with skills, qualifications and experience. Under California law, the University of California, Santa Cruz is required to post a reasonable estimate of the compensation for this role. The salary shown above is the budgeted amount the University reasonably expects to pay and the salary extended should not exceed this posted amount. Benefits Level Eligibility: Full benefits Schedule Information: • Full-time, Fixed • Percentage of Time: 100%, 40 Hours per Week • Days of the Week: Mon-Fri • Shift Includes: Day Employee Classification: Career appointment Job End Date: None Work Location: UC Santa Cruz Main Campus Union Representation: Service Employees (SX) Job Code Classification: HVY DUTY EQUIP TCHN (008476) Travel: Never or Rarely JOB DUTIES 65% - Maintenance/Repair/Metal Fabrication • Performs or assists other Heavy-Duty Equipment Technicians and Automotive Technicians in major repair and maintenance of automotive and heavy-duty vehicles and equipment, including major system overhauls. • Maintains and repairs emission control systems to ensure conformity to all local, state, and Federal emission regulations. • Performs maintenance and repair to vehicles and equipment operating on gasoline, diesel motor fuel, propane, compressed natural gas, and electric-powered vehicles and equipment. • Reads and interprets basic blueprints and executes metal fabrication projects as directed. 15% - Diagnostic • Inspects automotive and heavy equipment to determine corrective action necessary. • Performs drivability diagnosis of computer-controlled systems. • Performs repairs in the most cost-efficient manner possible. 10% - Equipment Operation • Operates vehicles and equipment during the course of maintenance and repair. • Utilizes engine analyzers, emission analyzers. • Operates shop tools and equipment, operate welding and fabrication equipment. 10% - Record Keeping • Prepares maintenance and repair records. • Prepares work orders that accurately reflect time and materials used in the course of repairs. REQUIRED QUALIFICATIONS • Journeyman level experience and skill in automotive heavy vehicle and equipment maintenance and repair. • Experience in the operation and maintenance of tools and special tools used in the course of performing job duties. • Ability to perform welding and fabrication operations required in the course of performing job duties. • Knowledge in the proper use and operation of diagnostic equipment used in the course of performing job duties. • Ability to properly inspect vehicles and equipment for needed maintenance and repairs, and to perform those maintenance and repair operations. • Ability to safely operate University owned vehicles and equipment. • Ability to work both individually and cooperatively with others with minimal or no supervision. • Ability to identify and correct hazardous conditions and to exercise good judgment when to report unsafe and hazardous conditions. • Ability to prioritize work assignments to meet deadlines, flexibility to work with changing workloads and deadlines, good customer service skills and the ability to work with interruptions. • Good interpersonal skills to effectively interact with coworkers and the ability to exercise diplomacy in dealing with diverse groups of people. PREFERRED QUALIFICATIONS • Demonstrated experience completing advanced welding and fabrication projects such as TIG, MIG, Arc, and Fuel/Gas welding, cutting, burning, and sheering of various metals including but not limited to steel, aluminum, stainless steel, and cast aluminum. SPECIAL CONDITIONS OF EMPLOYMENT • Selected candidate will be required to pass a pre-employment criminal history background check. • Selected candidate must pass the employment misconduct disclosure process. • Must possess a valid license to drive in the state of California and be able to participate in the Department of Motor Vehicles (DMV) pull notice program. • Must possess a valid Class B Commercial license to drive in the State of California, with passenger endorsement and a satisfactory driving record. License must not be restricted to vehicles 15 passengers or less including the driver, but must certify individual to drive passenger vehicles weighing more than 26, 001 gross vehicle weight rating (GVWR) and carrying 20 passengers or more including the driver (DMV CLASS B LICENSE WITH PASSENGER ENDORSEMENT). • Must possess, or obtain within 6 months of hire, a valid California Class B license to drive and participate in the Department of Motor Vehicles (DMV) pull notice program. Must participate in DOT drug testing program. • Ability to safely lift parts, components and supplies while bending, kneeling or stooping with or without accommodation. • Ability to safely push and move equipment weighing up to 160 pounds with or without accommodation. • Must have the ability to: operate a vacuum, floor scrubber, and polisher; use cleaning chemical compounds; perform essential custodial duties including dumping bags into dumpster or moving equipment and materials with or without accommodations. • Ability to occasionally work overtime with little or no advance notice, and work on-call to respond to emergencies after hours as necessary for emergency repairs. • Ability to work shift work, 6AM to 2:30PM. • Ability to work overtime including evenings, nights, weekends and holidays to meet operational needs, and work an alternate work schedule shift as required. • The University of California has implemented a covering all employees. Employees, including new hires, are required to comply with any applicable policies relating to the University of California vaccine program. • Per the Child Abuse and Neglect Reporting Act (CANRA), this position has been identified as a Mandated Reporter. The selected candidate will be required to report known or suspected child abuse or neglect as defined by CANRA and will be required to sign a Statement Acknowledging Requirement to Report Child Abuse prior to commencing employment. CANRA Penal Codes, and related definitions, requirements, and responsibilities may be obtained: leginfo.legislature.ca.gov/faces/codes_displayText.xhtml?lawCode=PEN&division=&title=1.∂=4.&chapter=2.&article=2.5. MISCONDUCT DISCLOSURE REQUIREMENT . click apply for full job details
What you'll need to succeed as a Trailer Mechanic at XPO Minimum qualifications: 1 year of verifiable experience in heavy-duty maintenance and/or time in an entry-level Technician role A valid driver's license Able to perform safety inspections of equipment and prepare safety documentation Basic computer skills Available to work a variety of shifts, including days, evenings, nights and weekends Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 369.25 Vehicle Inspection qualified in the Federal Motor Carrier Safety Administration regulations, Section 369.19 Basic hand tools required for heavy-duty trailer maintenance Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Diesel tech school diploma Previous or current ASE certifications Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Trailer Mechanic job Pay, benefits and more: Expected pay range: $29.36 to $37.09 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on trailing equipment, in compliance with the manufacturers, DOT, and company schedules Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of trailers Repair or rebuild all or part of equipment systems Abide by DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA) and other rules and regulations Maintain proficiency in equipment and technologies that enhance our productivity Move trailers throughout the property, and operate a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Trailer Mechanics are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. and occasionally more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
11/01/2025
Full time
What you'll need to succeed as a Trailer Mechanic at XPO Minimum qualifications: 1 year of verifiable experience in heavy-duty maintenance and/or time in an entry-level Technician role A valid driver's license Able to perform safety inspections of equipment and prepare safety documentation Basic computer skills Available to work a variety of shifts, including days, evenings, nights and weekends Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 369.25 Vehicle Inspection qualified in the Federal Motor Carrier Safety Administration regulations, Section 369.19 Basic hand tools required for heavy-duty trailer maintenance Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Diesel tech school diploma Previous or current ASE certifications Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Trailer Mechanic job Pay, benefits and more: Expected pay range: $29.36 to $37.09 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set. Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on trailing equipment, in compliance with the manufacturers, DOT, and company schedules Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of trailers Repair or rebuild all or part of equipment systems Abide by DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA) and other rules and regulations Maintain proficiency in equipment and technologies that enhance our productivity Move trailers throughout the property, and operate a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Trailer Mechanics are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. and occasionally more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
Description: We are Herrmann. We are looking for people who share our vision and culture. Let us shape the future together! Because our employees are our greatest asset. Herrmann Ultrasonics is hiring for a Design Engineer! Immerse yourself into the fascinating world of ultrasonic welding! Herrmann Ultrasonics develops and builds machines that join plastics, packaging materials, nonwovens and metals with ultrasonic vibrations. This technology is suitable in many industries, such as medical, electronics, food and automotive. With nearly 700 global employees, based in 4 Headquarters and 22 Tech Centers, we are represented in 20 countries worldwide. Job Profile Seeking a skilled and dynamic individual for a hybrid function in Tooling Design and Programming of CNC milling machines . CREO is used for the Design work and MasterCAM and WinMax for programming the CNC milling machines. This could be an entry level job into the Design world of industrial tools (sonotrodes) if you have machining experience like operating CNC milling machines and programming or modifying programs at the machines or using MasterCAM or similar. You have basic knowledge and understanding of CAD design tools. You will be developing and designing specialized tooling and fixtures for Ultrasonic welding applications. Detailed training in Ultrasonic welding and design requirements will be provided. Design and develop ultrasonic tooling and fixtures using CAD software (CREO) Create CNC milling machine programs using MasterCAM and WinMax Execute mechanical designs of customer requirements Plan and schedule changes Control project plans by reviewing design and specifications Communicate with internal and external customers to clarify drawings and CAD models Manage CAD library and project data base Requirements: Minimum of three (3) years' experience operating a CNC milling machine Minimum of three (3) years' CNC programming experience with multi-axis CNC machines Experience with MasterCAM Experience with CAD systems. CREO preferred Previous experience with product design for parts and tools preferred Ability to read, analyze and interpret drawings Familiar with GD & T, especially understanding and analyzing function and criticality of tolerances Understanding of engineering fundamentals, design tools, manufacturing processes, materials, and global quality standards Understanding of common industry specifications (material, coating, plating, etc.) Experience working in ISO 9001 quality systems in a manufacturing environment Excellent organizational skills and attention to detail with a sense of urgency Proficiency with ANSYS (analysis/simulation) preferred Proficiency with ERP systems preferred Excellent verbal and written communication skills Minimum of 3 years of relevant experience High School Diploma or equivalent education required Associate's Degree or Bachelor's Degree in Engineering or other related field preferred Health Benefits Various Health plans Flexible Spending Account Dental plan insurance Vision plan insurance Short-term disability insurance Long-term disability insurance Life insurance Financial Benefits 401(k) Generous paid holidays and vacation days Standardized bonus based on employee and company performance In short: We are looking for people who share our passion. People who want to make a difference and have ambitious goals. Become a part of Herrmann and let us shape the future together! PM22 Compensation details: 0 Yearly Salary PI6ffa9ed0a7d0-1744
11/01/2025
Full time
Description: We are Herrmann. We are looking for people who share our vision and culture. Let us shape the future together! Because our employees are our greatest asset. Herrmann Ultrasonics is hiring for a Design Engineer! Immerse yourself into the fascinating world of ultrasonic welding! Herrmann Ultrasonics develops and builds machines that join plastics, packaging materials, nonwovens and metals with ultrasonic vibrations. This technology is suitable in many industries, such as medical, electronics, food and automotive. With nearly 700 global employees, based in 4 Headquarters and 22 Tech Centers, we are represented in 20 countries worldwide. Job Profile Seeking a skilled and dynamic individual for a hybrid function in Tooling Design and Programming of CNC milling machines . CREO is used for the Design work and MasterCAM and WinMax for programming the CNC milling machines. This could be an entry level job into the Design world of industrial tools (sonotrodes) if you have machining experience like operating CNC milling machines and programming or modifying programs at the machines or using MasterCAM or similar. You have basic knowledge and understanding of CAD design tools. You will be developing and designing specialized tooling and fixtures for Ultrasonic welding applications. Detailed training in Ultrasonic welding and design requirements will be provided. Design and develop ultrasonic tooling and fixtures using CAD software (CREO) Create CNC milling machine programs using MasterCAM and WinMax Execute mechanical designs of customer requirements Plan and schedule changes Control project plans by reviewing design and specifications Communicate with internal and external customers to clarify drawings and CAD models Manage CAD library and project data base Requirements: Minimum of three (3) years' experience operating a CNC milling machine Minimum of three (3) years' CNC programming experience with multi-axis CNC machines Experience with MasterCAM Experience with CAD systems. CREO preferred Previous experience with product design for parts and tools preferred Ability to read, analyze and interpret drawings Familiar with GD & T, especially understanding and analyzing function and criticality of tolerances Understanding of engineering fundamentals, design tools, manufacturing processes, materials, and global quality standards Understanding of common industry specifications (material, coating, plating, etc.) Experience working in ISO 9001 quality systems in a manufacturing environment Excellent organizational skills and attention to detail with a sense of urgency Proficiency with ANSYS (analysis/simulation) preferred Proficiency with ERP systems preferred Excellent verbal and written communication skills Minimum of 3 years of relevant experience High School Diploma or equivalent education required Associate's Degree or Bachelor's Degree in Engineering or other related field preferred Health Benefits Various Health plans Flexible Spending Account Dental plan insurance Vision plan insurance Short-term disability insurance Long-term disability insurance Life insurance Financial Benefits 401(k) Generous paid holidays and vacation days Standardized bonus based on employee and company performance In short: We are looking for people who share our passion. People who want to make a difference and have ambitious goals. Become a part of Herrmann and let us shape the future together! PM22 Compensation details: 0 Yearly Salary PI6ffa9ed0a7d0-1744
Wha t you'll need to succeed as a Diesel Mechanic at XPO Minimum qualifications: 2 years of experience in tractor and trailer inspection and repair or a technical school degree with certification in heavy-duty truck/trailer maintenance Obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) A valid driver's license Basic welding skills (Oxy/Acetylene, MIG and ARC) and mechanical skills Basic hand tools required for heavy-duty trailer and tractor maintenance Basic computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Previous or current ASE certifications Diesel tech school diploma Experience with trailer repair, diesel engine system diagnostics and preventive maintenance for tractor technicians Able to diagnose and repair vehicle air conditioning systems About the Diesel Mechanic job Pay, benefits and more: Experienced Technicians can earn up to $41.01/ hour including Master Certification and shift differential. Up to $3,500 in bonuses available Monday - Friday operation 2nd or 3rd Shift Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on all types of class 6 through 8 diesel equipment, forklifts, and trailing equipment Access any of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under part of the equipment Repair or rebuild all or parts of various equipment systems Troubleshoot and diagnose equipment and component issues and perform repairs accordingly Perform HVAC system repairs Abide by DOT, EPA, Interstate Authority, OSHA and other rules and regulations Conduct safety inspections on equipment and prepare safety documentation as needed Maintain proficiency with equipment and technologies that enhance productivity Move trailers throughout the property, operating a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Diesel Mechanics are required to: Frequently lift up to 50 lbs. and occasionally lift more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here . Eligible participants who are hired while the program is in effect will receive a $1,500 sign-on bonus, if you voluntarily terminate employment before 12 months of continuous employment, you are required to repay 100% of the sign-on bonus. If you terminate employment after 12 months but before 24 months, you are required to repay 50% of the sign-on bonus. The sign-on bonus will be paid in accordance with the Company's payroll procedures on the normal payroll date following 30 days of your continuous employment. Current XPO employees are not eligible for sign-on bonuses. A $1,000 retention bonus will be paid to those eligible participants who are hired while the program is in effect and attain 6 months of continuous employment with XPO in their current qualified position. Eligible participants who are hired while the program is in effect and attain 12 months of continuous employment in their current qualified position will receive another $1,000 bonus. The bonuses are subject to all applicable taxes. All other rules governing this program will apply. Current XPO employees are not eligible for retention bonuses.
11/01/2025
Full time
Wha t you'll need to succeed as a Diesel Mechanic at XPO Minimum qualifications: 2 years of experience in tractor and trailer inspection and repair or a technical school degree with certification in heavy-duty truck/trailer maintenance Obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) A valid driver's license Basic welding skills (Oxy/Acetylene, MIG and ARC) and mechanical skills Basic hand tools required for heavy-duty trailer and tractor maintenance Basic computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: High school diploma or equivalent work-related or military experience Prior mechanical experience such as automotive or skilled trades Previous or current ASE certifications Diesel tech school diploma Experience with trailer repair, diesel engine system diagnostics and preventive maintenance for tractor technicians Able to diagnose and repair vehicle air conditioning systems About the Diesel Mechanic job Pay, benefits and more: Experienced Technicians can earn up to $41.01/ hour including Master Certification and shift differential. Up to $3,500 in bonuses available Monday - Friday operation 2nd or 3rd Shift Company-provided uniforms Tool allowance of $400 per quarter Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance This is a Motor Carrier Act Exempt position What you'll do on a typical day: Perform routine maintenance functions and adjustments on all types of class 6 through 8 diesel equipment, forklifts, and trailing equipment Access any of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under part of the equipment Repair or rebuild all or parts of various equipment systems Troubleshoot and diagnose equipment and component issues and perform repairs accordingly Perform HVAC system repairs Abide by DOT, EPA, Interstate Authority, OSHA and other rules and regulations Conduct safety inspections on equipment and prepare safety documentation as needed Maintain proficiency with equipment and technologies that enhance productivity Move trailers throughout the property, operating a hostler in all types of weather Enter job times and parts on repair orders to track activity Operate specialized tooling and vehicles Ensure the work area is always clean, safe, and organized Interact with operations and shop management Diesel Mechanics are required to: Frequently lift up to 50 lbs. and occasionally lift more than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel Walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here . Eligible participants who are hired while the program is in effect will receive a $1,500 sign-on bonus, if you voluntarily terminate employment before 12 months of continuous employment, you are required to repay 100% of the sign-on bonus. If you terminate employment after 12 months but before 24 months, you are required to repay 50% of the sign-on bonus. The sign-on bonus will be paid in accordance with the Company's payroll procedures on the normal payroll date following 30 days of your continuous employment. Current XPO employees are not eligible for sign-on bonuses. A $1,000 retention bonus will be paid to those eligible participants who are hired while the program is in effect and attain 6 months of continuous employment with XPO in their current qualified position. Eligible participants who are hired while the program is in effect and attain 12 months of continuous employment in their current qualified position will receive another $1,000 bonus. The bonuses are subject to all applicable taxes. All other rules governing this program will apply. Current XPO employees are not eligible for retention bonuses.
Position Title: (Mechanic) Field Service Technician - CDL B Required Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. Requires CDL - Class B POSITION SUMMARY The Service Technician must work safely and productively on various sized project sites and at other company facilities. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Service Technician position. All employees are expected to communicate, build relationships with other team members and use good judgment at all times. The Service Technician is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES Work in a safe manner, recognize and correct Service Center hazards and comply with WBC safety requirements Serve as a safe and productive member of the Asset Group Confer with Service Center Supervisor / review work orders Inspect equipment to determine service / repair needs Perform routine maintenance services and repairs for on-road vehicles, small tools (electric and gas) and light / heavy equipment ranging from portable generators to 40,000-pound track excavators Test components / systems utilizing analyzers, gauges and computerized diagnostic devices Disassemble units and inspect parts for wear / repair Follow manufacturer's documents and WBC checklists to ensure equipment is thoroughly examined and maintained Test-drive to verify equipment is functioning properly after maintenance / repair is complete to ensure the piece does not return "problem not fixed." Equipment / Tool Tag - complete the white tab upon completion of the work Daily Equipment Maintenance / Safety Inspection Checklist - include a blank checklist in all equipment with checklist tubes or cabs upon completion of the work Document service records Welding Clean / wash equipment Be available for emergency calls outside normal business hours Perform all other tasks and duties as assigned Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience High School Diploma / GED - required Automotive maintenance training / experience - required Small tools (electric and gas) training / experience - required Light / heavy equipment training / experience - required Basic computer skills (typing, email, Internet) - required Knowledge, Skills and Abilities Required Problem-solving, trouble-shooting, and mechanical reasoning Analyzing and interpreting equipment service manuals, schematics, etc. Focus, concentration, attention to fine detail, pride in workmanship Thinking logically and critically Making judgments and decisions at task and process levels Listening, speaking, reading and writing at a basic level Working Conditions Indoors - frequently Outdoors - periodically Temperatures - seasonal Loud noise - frequently Forty to fifty-hour work week - frequently Multi-activity worksites - infrequently Traveling out of town - infrequently Certificates, Licenses, Registrations Valid CDL Class B driver's license - required OSHA - 10-Hour Certification - required when offered by WBC OSHA - 30-Hour Certification - desirable First Aid / CPR - desirable ASE Certification - desirable All-terrain material handler certification - required when offered by WBC Aerial lift certification - required when offered by WBC Physical Demands Lifting, carrying, or moving up to 50 pounds Standing for long periods of time Frequent climbing, leaning Manual dexterity Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PId42a0-7287
11/01/2025
Full time
Position Title: (Mechanic) Field Service Technician - CDL B Required Date Posted: 09/26/2025 Location: Davidson, NC Pay Range: N/A Please review position description and requirements and begin application online by clicking on the Apply Now above. Requires CDL - Class B POSITION SUMMARY The Service Technician must work safely and productively on various sized project sites and at other company facilities. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Service Technician position. All employees are expected to communicate, build relationships with other team members and use good judgment at all times. The Service Technician is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES Work in a safe manner, recognize and correct Service Center hazards and comply with WBC safety requirements Serve as a safe and productive member of the Asset Group Confer with Service Center Supervisor / review work orders Inspect equipment to determine service / repair needs Perform routine maintenance services and repairs for on-road vehicles, small tools (electric and gas) and light / heavy equipment ranging from portable generators to 40,000-pound track excavators Test components / systems utilizing analyzers, gauges and computerized diagnostic devices Disassemble units and inspect parts for wear / repair Follow manufacturer's documents and WBC checklists to ensure equipment is thoroughly examined and maintained Test-drive to verify equipment is functioning properly after maintenance / repair is complete to ensure the piece does not return "problem not fixed." Equipment / Tool Tag - complete the white tab upon completion of the work Daily Equipment Maintenance / Safety Inspection Checklist - include a blank checklist in all equipment with checklist tubes or cabs upon completion of the work Document service records Welding Clean / wash equipment Be available for emergency calls outside normal business hours Perform all other tasks and duties as assigned Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times PM20 Education and/or Experience High School Diploma / GED - required Automotive maintenance training / experience - required Small tools (electric and gas) training / experience - required Light / heavy equipment training / experience - required Basic computer skills (typing, email, Internet) - required Knowledge, Skills and Abilities Required Problem-solving, trouble-shooting, and mechanical reasoning Analyzing and interpreting equipment service manuals, schematics, etc. Focus, concentration, attention to fine detail, pride in workmanship Thinking logically and critically Making judgments and decisions at task and process levels Listening, speaking, reading and writing at a basic level Working Conditions Indoors - frequently Outdoors - periodically Temperatures - seasonal Loud noise - frequently Forty to fifty-hour work week - frequently Multi-activity worksites - infrequently Traveling out of town - infrequently Certificates, Licenses, Registrations Valid CDL Class B driver's license - required OSHA - 10-Hour Certification - required when offered by WBC OSHA - 30-Hour Certification - desirable First Aid / CPR - desirable ASE Certification - desirable All-terrain material handler certification - required when offered by WBC Aerial lift certification - required when offered by WBC Physical Demands Lifting, carrying, or moving up to 50 pounds Standing for long periods of time Frequent climbing, leaning Manual dexterity Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy. PId42a0-7287
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments. Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required . "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military. 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions. 1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals. Ability to lift up to 35lbs. Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5"X17.7". Proficiency in reading, writing, and speaking English. Preferred Qualifications : 1+ years of experience performing aircraft structural work or equivalate. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift : This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities . The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work . The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations . Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Summary pay range : $26.32 - $56.36 Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
11/01/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments. Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required . "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military. 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions. 1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals. Ability to lift up to 35lbs. Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5"X17.7". Proficiency in reading, writing, and speaking English. Preferred Qualifications : 1+ years of experience performing aircraft structural work or equivalate. Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift : This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities . The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work . The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations . Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Summary pay range : $26.32 - $56.36 Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
New and improved industry-leading wages! Transdev is hiring for a variety of Automotive and Diesel Mechanics positions in the Minneapolis/St. Paul area. Transdev is seeking multiple experienced A or B technicians to perform maintenance on a variety of vehicles including Ford cutaways and transit buses. We utilize a paperless shop with iPad tablet technology that makes filling out work orders much easier and less time consuming. Transdev is proud to offer: Base starting hourly wages from $30.75 to $44.92/hr. based on experience & qualifications (not flat rate) Shift differentials $2/hr. for second shift, $2/hr. for weekend hours ASE incentive program with $.25/hr. for each primary automotive certification and $.15/hr. for each secondary transit certification Additional $1000 annual bonus for maintaining ASE triple master status Additional $1000 annual bonus for maintaining ASE quad master status Company-paid ASE testing and training materials Consistent full-time, year-round work Benefits package including medical, vision, and dental coverage, and 401k Paid holidays, vacation, & sick time Annual allowances for boots and prescription safety glasses Opportunities for career advancement nationwide Major Responsibilities: Perform vehicle maintenance and repairs to maintain a safe and reliable fleet Diagnose and perform all phases of vehicle and equipment repair including brakes, engine performance, suspensions, drive trains, transmission, and other repairs Ensure work orders are completed properly and accurately. Technician Qualifications: Valid driver's license required. We provide company paid training to help you obtain your CDL! 2+ years of automotive or diesel repair employment experience or combination of education & experience. Must have appropriate mechanic's tool set. ASE certifications preferred. Must be willing to participate in company ASE certification program Subject to DOT drug testing. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video at The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. Job Category: Mechanics/Technicians Job Type: Full Time Req ID: 6429 Pay Group: DVF Cost Center: 55445 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video.
11/01/2025
Full time
New and improved industry-leading wages! Transdev is hiring for a variety of Automotive and Diesel Mechanics positions in the Minneapolis/St. Paul area. Transdev is seeking multiple experienced A or B technicians to perform maintenance on a variety of vehicles including Ford cutaways and transit buses. We utilize a paperless shop with iPad tablet technology that makes filling out work orders much easier and less time consuming. Transdev is proud to offer: Base starting hourly wages from $30.75 to $44.92/hr. based on experience & qualifications (not flat rate) Shift differentials $2/hr. for second shift, $2/hr. for weekend hours ASE incentive program with $.25/hr. for each primary automotive certification and $.15/hr. for each secondary transit certification Additional $1000 annual bonus for maintaining ASE triple master status Additional $1000 annual bonus for maintaining ASE quad master status Company-paid ASE testing and training materials Consistent full-time, year-round work Benefits package including medical, vision, and dental coverage, and 401k Paid holidays, vacation, & sick time Annual allowances for boots and prescription safety glasses Opportunities for career advancement nationwide Major Responsibilities: Perform vehicle maintenance and repairs to maintain a safe and reliable fleet Diagnose and perform all phases of vehicle and equipment repair including brakes, engine performance, suspensions, drive trains, transmission, and other repairs Ensure work orders are completed properly and accurately. Technician Qualifications: Valid driver's license required. We provide company paid training to help you obtain your CDL! 2+ years of automotive or diesel repair employment experience or combination of education & experience. Must have appropriate mechanic's tool set. ASE certifications preferred. Must be willing to participate in company ASE certification program Subject to DOT drug testing. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video at The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. Job Category: Mechanics/Technicians Job Type: Full Time Req ID: 6429 Pay Group: DVF Cost Center: 55445 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video.
Automotive Mechanic Level II Transdev in Lakewood, Washington is seeking an experienced Level II Automotive Mechanic to bolster our team. This role demands expertise in diagnosing, repairing, and maintaining gasoline engines across various vehicles and equipment. As a Technician, you'll play a crucial role in ensuring safety, efficiency, and longevity for our vehicles. Transdev is proud to offer: Competitive compensation package of minimum $32.00 per hour (thirty-two) - Maximum $34.00 per hour (thirty-four), plus ASE certification stipends & PM Shift (starting after 2pm) Differential of $1.00 (one) per hour. Benefits include: Vacation: minimum of two (2) weeks Sick days: One (1) hour earned for every forty (40) worked Holidays: 12 days; 8 standard and 4 floating Other standard benefits: 401(k) retirement plan, medical, dental and vision, life insurance, short-term disability, voluntary long-term disability. Company paid ASE testing, training materials, and tool reimbursement Benefits may vary depending on location policy. The above represents the standard Corporate Policy. Key Responsibilities: Conduct diagnostic tests using advanced tools and software to troubleshoot Automotive engine issues. Perform moderate complexity repairs and replacements on Automotive engine components, ensuring optimal functionality. Assist Level One Mechanics in advanced diagnostic and repair tasks, contributing to efficient workflow. Execute routine maintenance tasks to prevent breakdowns and optimize engine performance. Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies. Perform advanced troubleshooting and repair tasks, including overhauling and rebuilding components to required specifications. Provide guidance and mentorship to junior technicians, assisting them in developing their skills and knowledge Other duties as required. Qualifications: 3-5 years of experience as an Automotive or Fleet Mechanic. Possess two (2) ASE certifications required or ability to obtain within 90 days of being hired; ASE certification program provided Mechanic's Tool Set Must be able to work shifts or flexible work schedules as needed. Subject to a DOT drug testing and physical. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Ability to obtain a DOT medical certification and maintain it active while employed. Company pays for DOT medical certification and annual renewals. Physical Requirements: The essential functions of this position require the ability to: Work outside in varying temperature, weather, and humidity conditions- occasionally work without supervision. Frequently walk for long distances and on possible sloped ground or slippery and uneven surfaces Push and pull objects up to 50 pounds, occasionally throughout the workday; lift material weighing up to 50 lbs. with or without assistance; occasionally bend, kneel, or crouch to reach equipment stored at ground level Withstand heavy traffic areas while performing the duties of the job; tolerate exposure to dust, vehicle fumes and noise. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Transdev complies with federal and state disability laws and makes reasonable accommodations for applicants and candidates with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, please contact Drug-free workplace Transdev maintains a drug-free workplace. Applicants must: Be eligible to work in the United States without requiring sponsorship now or in the future (if based in the U.S.). Successfully pass a pre-employment drug screen. If you have questions, please reach out to the Hiring Manager - CJ Hobbs at . About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video at The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. California applicants: Please Click Here for CA Employee Privacy Policy. Job Category: Maintenance / Mechanics / Parts / Utility / Materials Job Type: Full Time Req ID: 6298 Pay Group: DVF Cost Center: 55884 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video.
11/01/2025
Full time
Automotive Mechanic Level II Transdev in Lakewood, Washington is seeking an experienced Level II Automotive Mechanic to bolster our team. This role demands expertise in diagnosing, repairing, and maintaining gasoline engines across various vehicles and equipment. As a Technician, you'll play a crucial role in ensuring safety, efficiency, and longevity for our vehicles. Transdev is proud to offer: Competitive compensation package of minimum $32.00 per hour (thirty-two) - Maximum $34.00 per hour (thirty-four), plus ASE certification stipends & PM Shift (starting after 2pm) Differential of $1.00 (one) per hour. Benefits include: Vacation: minimum of two (2) weeks Sick days: One (1) hour earned for every forty (40) worked Holidays: 12 days; 8 standard and 4 floating Other standard benefits: 401(k) retirement plan, medical, dental and vision, life insurance, short-term disability, voluntary long-term disability. Company paid ASE testing, training materials, and tool reimbursement Benefits may vary depending on location policy. The above represents the standard Corporate Policy. Key Responsibilities: Conduct diagnostic tests using advanced tools and software to troubleshoot Automotive engine issues. Perform moderate complexity repairs and replacements on Automotive engine components, ensuring optimal functionality. Assist Level One Mechanics in advanced diagnostic and repair tasks, contributing to efficient workflow. Execute routine maintenance tasks to prevent breakdowns and optimize engine performance. Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies. Perform advanced troubleshooting and repair tasks, including overhauling and rebuilding components to required specifications. Provide guidance and mentorship to junior technicians, assisting them in developing their skills and knowledge Other duties as required. Qualifications: 3-5 years of experience as an Automotive or Fleet Mechanic. Possess two (2) ASE certifications required or ability to obtain within 90 days of being hired; ASE certification program provided Mechanic's Tool Set Must be able to work shifts or flexible work schedules as needed. Subject to a DOT drug testing and physical. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Ability to obtain a DOT medical certification and maintain it active while employed. Company pays for DOT medical certification and annual renewals. Physical Requirements: The essential functions of this position require the ability to: Work outside in varying temperature, weather, and humidity conditions- occasionally work without supervision. Frequently walk for long distances and on possible sloped ground or slippery and uneven surfaces Push and pull objects up to 50 pounds, occasionally throughout the workday; lift material weighing up to 50 lbs. with or without assistance; occasionally bend, kneel, or crouch to reach equipment stored at ground level Withstand heavy traffic areas while performing the duties of the job; tolerate exposure to dust, vehicle fumes and noise. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Transdev complies with federal and state disability laws and makes reasonable accommodations for applicants and candidates with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, please contact Drug-free workplace Transdev maintains a drug-free workplace. Applicants must: Be eligible to work in the United States without requiring sponsorship now or in the future (if based in the U.S.). Successfully pass a pre-employment drug screen. If you have questions, please reach out to the Hiring Manager - CJ Hobbs at . About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video at The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. California applicants: Please Click Here for CA Employee Privacy Policy. Job Category: Maintenance / Mechanics / Parts / Utility / Materials Job Type: Full Time Req ID: 6298 Pay Group: DVF Cost Center: 55884 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video.
What you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Experienced Technicians can earn $38.99/ hour including Master Certification $3,500 in bonuses Tool allowance of $400 per quarter Company-provided uniforms This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance What you'll do on a typical day: Schedule and supervise shop personnel Order parts and manage vendors Ensure technicians receive the required training Perform routine maintenance functions and adjustments on all types of class 7 and 8 diesel equipment, forklifts and trailing equipment in compliance with the manufacturer's and company's schedules Safely access any area of the equipment or vehicle to perform necessary maintenance, including inspecting and performing work in, on or under parts of vehicles and trailers Apply knowledge of and work by the Department of Transportation (DOT), Environmental Protection Agency (EPA), Interstate Authority and the Occupational Safety and Health Administration (OSHA); follow all rules, regulations, policies and procedures, and lead your team to do the same Repair or rebuild all or parts of various equipment systems Move trailers throughout the property Operate a hostler in all types of weather; safely walk and stand for extended periods Lead Technicians are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. And occasionally greater than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
11/01/2025
Full time
What you'll need to succeed as a Lead Technician at XPO Minimum qualifications: 4 years of related work experience or military experience A valid driver's license Strong computer skills Brake inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.25 Vehicle Inspection qualified as defined in the Federal Motor Carrier Safety Administration regulations, Section 396.19 Able to obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (ASE, MACS or equivalent) Prior mechanical experience in the automotive industry or skilled trades Available to work a variety of shifts, including days, evenings, nights, and weekends Preferred qualifications: 3 years of hands-on experience as a fleet technician Tractor and trailer experience Forklift repair knowledge ASE Master MD/HD truck certification Diesel tech school diploma Basic welding skills (Oxy/Acetylene, MIG and ARC) About the Lead Technician job Pay, benefits and more: Experienced Technicians can earn $38.99/ hour including Master Certification $3,500 in bonuses Tool allowance of $400 per quarter Company-provided uniforms This is a Motor Carrier Act Exempt position Full health insurance benefits on day one Life and disability insurance Earn up to 13 days of PTO over your first year, with accruals starting on day one 9 paid company holidays 401(k) option with company match Education assistance What you'll do on a typical day: Schedule and supervise shop personnel Order parts and manage vendors Ensure technicians receive the required training Perform routine maintenance functions and adjustments on all types of class 7 and 8 diesel equipment, forklifts and trailing equipment in compliance with the manufacturer's and company's schedules Safely access any area of the equipment or vehicle to perform necessary maintenance, including inspecting and performing work in, on or under parts of vehicles and trailers Apply knowledge of and work by the Department of Transportation (DOT), Environmental Protection Agency (EPA), Interstate Authority and the Occupational Safety and Health Administration (OSHA); follow all rules, regulations, policies and procedures, and lead your team to do the same Repair or rebuild all or parts of various equipment systems Move trailers throughout the property Operate a hostler in all types of weather; safely walk and stand for extended periods Lead Technicians are required to: Lift objects of various shapes, sizes, and weights frequently up to 50 lbs. And occasionally greater than 75 lbs. Safely walk and stand for extended periods on various surfaces that may be uneven or slippery, including working outdoors in inclement weather Reach (including above your head), bend, climb, push, pull, twist, squat and kneel About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement here .
Maintenance Technician A (III) Searching for a Diesel Mechanic position in the Minneapolis area? Transdev in Minneapolis is seeking an experienced A-Level Diesel Mechanic to bolster our team. This role demands expertise in diagnosing, repairing, and maintaining diesel engines across various vehicles and equipment. As a Diesel Mechanic, you'll play a crucial role in ensuring safety, efficiency, and longevity for our diesel-powered assets. Transdev is proud to offer: CBA Position: Position Subject to Collective Bargaining Agreement: $31.98 - $45.45 (Union Collective Bargaining Agreement PayScale) up to $50/hour for highly qualified technicians. Relocation negotiable. Shift differentials $2/hr. for second shift, $2/hr. for weekend hours ASE incentive program with $.25/hr. for each primary automotive certification and $.15/hr. for each secondary transit certification Additional $1000 annual bonus for maintaining ASE triple master status Additional $1000 annual bonus for maintaining ASE quad master status Benefits include: Vacation: up to 14 days per year Sick days: 5 days Holidays: 8 days; 3floating Other standard benefits: 401(k) retirement plan, medical, dental and vision, life insurance, short-term disability, voluntary long-term disability. Company paid ASE testing, training materials, and tool reimbursement Benefits may vary depending on location policy. The above represents the standard Corporate Policy. Key Responsibilities: Conduct diagnostic tests to identify issues and determine necessary repairs on diesel engines. Perform routine maintenance tasks to prevent breakdowns and optimize performance. Collaborate with team members to ensure efficient and accurate repairs Complete preventative maintenance (PMs), safety inspections, and annual maintenance inspections. Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies for diesel engines. Perform advanced troubleshooting and repair tasks on diesel engines, including overhauling and rebuilding components to required specifications. Provide guidance and mentorship to junior technicians, assisting them in developing their skills and knowledge. Other duties as required. Qualifications: 3 years of experience as a Diesel Mechanic. ASE certifications required; ASE certification program provided. Mechanic's Tool Set Subject to a DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Physical Requirements: Must be able to work shifts or flexible work schedules as needed Work environment will be a combination of both indoors and outdoors. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move everyday thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video at The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. Job Category: Mechanics/Technicians Job Type: Full Time Req ID: 6427 Pay Group: 2V9 Cost Center: 55779 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video.
11/01/2025
Full time
Maintenance Technician A (III) Searching for a Diesel Mechanic position in the Minneapolis area? Transdev in Minneapolis is seeking an experienced A-Level Diesel Mechanic to bolster our team. This role demands expertise in diagnosing, repairing, and maintaining diesel engines across various vehicles and equipment. As a Diesel Mechanic, you'll play a crucial role in ensuring safety, efficiency, and longevity for our diesel-powered assets. Transdev is proud to offer: CBA Position: Position Subject to Collective Bargaining Agreement: $31.98 - $45.45 (Union Collective Bargaining Agreement PayScale) up to $50/hour for highly qualified technicians. Relocation negotiable. Shift differentials $2/hr. for second shift, $2/hr. for weekend hours ASE incentive program with $.25/hr. for each primary automotive certification and $.15/hr. for each secondary transit certification Additional $1000 annual bonus for maintaining ASE triple master status Additional $1000 annual bonus for maintaining ASE quad master status Benefits include: Vacation: up to 14 days per year Sick days: 5 days Holidays: 8 days; 3floating Other standard benefits: 401(k) retirement plan, medical, dental and vision, life insurance, short-term disability, voluntary long-term disability. Company paid ASE testing, training materials, and tool reimbursement Benefits may vary depending on location policy. The above represents the standard Corporate Policy. Key Responsibilities: Conduct diagnostic tests to identify issues and determine necessary repairs on diesel engines. Perform routine maintenance tasks to prevent breakdowns and optimize performance. Collaborate with team members to ensure efficient and accurate repairs Complete preventative maintenance (PMs), safety inspections, and annual maintenance inspections. Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies for diesel engines. Perform advanced troubleshooting and repair tasks on diesel engines, including overhauling and rebuilding components to required specifications. Provide guidance and mentorship to junior technicians, assisting them in developing their skills and knowledge. Other duties as required. Qualifications: 3 years of experience as a Diesel Mechanic. ASE certifications required; ASE certification program provided. Mechanic's Tool Set Subject to a DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Physical Requirements: Must be able to work shifts or flexible work schedules as needed Work environment will be a combination of both indoors and outdoors. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move everyday thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video at The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. Job Category: Mechanics/Technicians Job Type: Full Time Req ID: 6427 Pay Group: 2V9 Cost Center: 55779 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video.
