Pilatus is looking for a detail-oriented individual to join our new state-of-the-art Aircraft Paint Shop. In this role, you will work under limited supervision to prepare and paint aircraft exteriors and components such as fuselages, wings, fairings, horizontals, verticals, and flight controls in accordance with special specifications and all technical data. You will also process the assigned workload through the shop while meeting quality and schedule expectations. Additionally, you will mask, sand, prime, paint, and complete paint inspections on the PC-12 NGX Single Engine Turboprop, and the PC-24 Super Versatile Jet. You will be a key part of our team that values a perfect final aircraft delivery that brings our customers' dreams to life. Take your career to the next level with Pilatus Business Aircraft! What you do Has a thorough understanding of all pertinent paint shop processes, paint systems, and quality standardsPerforms customer-facing, finish-grade painting in accordance with applicable specifications by fabricating patterns, stencils, templates, and operating spray equipment to apply finish coatsPrepares aircraft surfaces by sanding, masking, and priming surfaces for final layout and paintingPerforms incoming inspection of aircraft and materials upon arrival from StansRecognizes and troubleshoots problems as they arise, alerting others regarding potential concerns and ensures that all materials are available to support painting activitiesMaintains accurate records and documents and complete sign-offs in a timely mannerEnsures all work is performed according to applicable regulatory requirements, customer specifications, and established quality standards and procedures and notifies appropriate personnel of any deviationsFollows safety policies and uses required personal protective equipment in accordance with company and government regulations and guidelinesOther Duties/ResponsibilitiesWorks with and accepts guidance from Leads and higher skilled technicians, while helping to build skills and abilities of lower level techniciansDevelops and implements skills and techniques required to perform all assigned tasks in accordance with Pilatus quality standardsPerforms other related duties and assists coworkers and other departments to successfully perform other job tasks as assigned by Lead or Manager What you bring High school diploma or general education degree (GED) requiredTwo (2) years related trade school or vocational degree preferredDemonstrated craftsman-level abilities and quality, and a minimum of two (2) years related experience or equivalent combination of education and experienceAbility to use measuring tools and perform basic math computationsAbility to use paint sanders, spray guns, primer guns, sealant guns, and buffersAbility to read, understand, and adhere to engineering drawings, tech specs, and other relevant documentsEye for precision and attention to detailsAble to work in heights, restricted spaces, and lift up to 40 poundsRegular, reliable attendance and willingness to work overtime and other shifts as requiredBasic computer skills including Microsoft Office, including Outlook, Word, and ExcelMust be able to read, write, speak, and understand EnglishMust qualify as a . person in compliance with ITAR 22 CFR 120.62 What we offer 11 paid holidays a year, plus 15 days of paid vacation time, and 6 days of paid sick/personal time to start with an increase to 20 days of paid vacation time after 5 years with Pilatus90% of medical, dental, and vision premiums paid for single coverage and 80% for family coverage, averaging $9, 600 annuallyMonthly health savings account (HSA) contributions totaling $2, 250 for single coverage and $3, 000 for family coverage annually401(k) retirement plan matching up to 6%Life and long-term disability insurance premiums paid in fullTuition assistance available annually after the first year
09/08/2025
Full time
Pilatus is looking for a detail-oriented individual to join our new state-of-the-art Aircraft Paint Shop. In this role, you will work under limited supervision to prepare and paint aircraft exteriors and components such as fuselages, wings, fairings, horizontals, verticals, and flight controls in accordance with special specifications and all technical data. You will also process the assigned workload through the shop while meeting quality and schedule expectations. Additionally, you will mask, sand, prime, paint, and complete paint inspections on the PC-12 NGX Single Engine Turboprop, and the PC-24 Super Versatile Jet. You will be a key part of our team that values a perfect final aircraft delivery that brings our customers' dreams to life. Take your career to the next level with Pilatus Business Aircraft! What you do Has a thorough understanding of all pertinent paint shop processes, paint systems, and quality standardsPerforms customer-facing, finish-grade painting in accordance with applicable specifications by fabricating patterns, stencils, templates, and operating spray equipment to apply finish coatsPrepares aircraft surfaces by sanding, masking, and priming surfaces for final layout and paintingPerforms incoming inspection of aircraft and materials upon arrival from StansRecognizes and troubleshoots problems as they arise, alerting others regarding potential concerns and ensures that all materials are available to support painting activitiesMaintains accurate records and documents and complete sign-offs in a timely mannerEnsures all work is performed according to applicable regulatory requirements, customer specifications, and established quality standards and procedures and notifies appropriate personnel of any deviationsFollows safety policies and uses required personal protective equipment in accordance with company and government regulations and guidelinesOther Duties/ResponsibilitiesWorks with and accepts guidance from Leads and higher skilled technicians, while helping to build skills and abilities of lower level techniciansDevelops and implements skills and techniques required to perform all assigned tasks in accordance with Pilatus quality standardsPerforms other related duties and assists coworkers and other departments to successfully perform other job tasks as assigned by Lead or Manager What you bring High school diploma or general education degree (GED) requiredTwo (2) years related trade school or vocational degree preferredDemonstrated craftsman-level abilities and quality, and a minimum of two (2) years related experience or equivalent combination of education and experienceAbility to use measuring tools and perform basic math computationsAbility to use paint sanders, spray guns, primer guns, sealant guns, and buffersAbility to read, understand, and adhere to engineering drawings, tech specs, and other relevant documentsEye for precision and attention to detailsAble to work in heights, restricted spaces, and lift up to 40 poundsRegular, reliable attendance and willingness to work overtime and other shifts as requiredBasic computer skills including Microsoft Office, including Outlook, Word, and ExcelMust be able to read, write, speak, and understand EnglishMust qualify as a . person in compliance with ITAR 22 CFR 120.62 What we offer 11 paid holidays a year, plus 15 days of paid vacation time, and 6 days of paid sick/personal time to start with an increase to 20 days of paid vacation time after 5 years with Pilatus90% of medical, dental, and vision premiums paid for single coverage and 80% for family coverage, averaging $9, 600 annuallyMonthly health savings account (HSA) contributions totaling $2, 250 for single coverage and $3, 000 for family coverage annually401(k) retirement plan matching up to 6%Life and long-term disability insurance premiums paid in fullTuition assistance available annually after the first year
We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Job Description Summary: This position prepares patients for examinations and performs diagnostic radiology procedures following guidelines set by OhioHealth and the American Registry of Radiologic Technologists (ARRT). Responsibilities And Duties: 40% Performs Diagnostic procedures. Conducts routine radiographic studies in diagnostics. Conducts routine and specialized fluoroscopy studies utilizing digital fluroscope equipment; Maintains proficiency in each of these areas. Provides radiation safety for operator and patient. 40% Obtains diagnostic radiographs Places patient in proper positions for procedures, adhering to department policy regarding routine. Positions anatomical part in position necessary to obtain optimum radiograph. Observes patient throughout procedure and responds to any observed change period manipulates equipment in proper manner, adjust technical factors to assure optimal images, and observes equipment safety. Critiques images inputs through only those optimal for interpretation. Repeats images as necessary. 15% Prepares patients for examination Receives orders/request for procedures from physician, nursing unit, or radiology office and makes necessary entries in electronic medical record. Greets patient and friendly manner and makes positive identification. Explains procedure in clear, understandable terms. Ensures all necessary clothing and jewelry is removed and patient is properly attired. Starts IBS and draws up medications. 5% Performs miscellaneous related duties Assumes duties of electronic imaging technician when necessary. Processes images for interpretation. Imports and burn CDs. Performs QC tests on X ray unit and impacts as necessary. Works with students enrolled in radiography program under program guidelines. Minimum Qualifications: ARRT - American Registry of Radiologic Technologists - American Registry of Radiologic Technologists, ARRT-DOH - American Registry of Radiologic Technologists License from Ohio Department of Health - American Registry of Radiologic Technologists, BLS - Basic Life Support - American Heart Association Additional Job Description: SPECIALIZED KNOWLEDGE Graduate of an approved accredited radiography program. Registered with ARRT; ODH Ohio Radiologic License, BLS certification. Thorough knowledge of various medical imaging procedures and equipment including proper technique and positioning, handling, and administering ionizing radiation to include contrast media agents, radiographic anatomy and physiology and medical terminology. Expresses superior customer service skills. Pleasant demeanor, neat, poised appearance. Ability to function as team member, with limited supervision. Highly motivated with effective written and verbal communication and effective organizational skills. Work Shift: Variable Scheduled Weekly Hours : As Needed Department Dawson Supplemental Staff Join us! if your passion is to work in a caring environment if you believe that learning is a life-long process if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment
09/07/2025
Full time
We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Job Description Summary: This position prepares patients for examinations and performs diagnostic radiology procedures following guidelines set by OhioHealth and the American Registry of Radiologic Technologists (ARRT). Responsibilities And Duties: 40% Performs Diagnostic procedures. Conducts routine radiographic studies in diagnostics. Conducts routine and specialized fluoroscopy studies utilizing digital fluroscope equipment; Maintains proficiency in each of these areas. Provides radiation safety for operator and patient. 40% Obtains diagnostic radiographs Places patient in proper positions for procedures, adhering to department policy regarding routine. Positions anatomical part in position necessary to obtain optimum radiograph. Observes patient throughout procedure and responds to any observed change period manipulates equipment in proper manner, adjust technical factors to assure optimal images, and observes equipment safety. Critiques images inputs through only those optimal for interpretation. Repeats images as necessary. 15% Prepares patients for examination Receives orders/request for procedures from physician, nursing unit, or radiology office and makes necessary entries in electronic medical record. Greets patient and friendly manner and makes positive identification. Explains procedure in clear, understandable terms. Ensures all necessary clothing and jewelry is removed and patient is properly attired. Starts IBS and draws up medications. 5% Performs miscellaneous related duties Assumes duties of electronic imaging technician when necessary. Processes images for interpretation. Imports and burn CDs. Performs QC tests on X ray unit and impacts as necessary. Works with students enrolled in radiography program under program guidelines. Minimum Qualifications: ARRT - American Registry of Radiologic Technologists - American Registry of Radiologic Technologists, ARRT-DOH - American Registry of Radiologic Technologists License from Ohio Department of Health - American Registry of Radiologic Technologists, BLS - Basic Life Support - American Heart Association Additional Job Description: SPECIALIZED KNOWLEDGE Graduate of an approved accredited radiography program. Registered with ARRT; ODH Ohio Radiologic License, BLS certification. Thorough knowledge of various medical imaging procedures and equipment including proper technique and positioning, handling, and administering ionizing radiation to include contrast media agents, radiographic anatomy and physiology and medical terminology. Expresses superior customer service skills. Pleasant demeanor, neat, poised appearance. Ability to function as team member, with limited supervision. Highly motivated with effective written and verbal communication and effective organizational skills. Work Shift: Variable Scheduled Weekly Hours : As Needed Department Dawson Supplemental Staff Join us! if your passion is to work in a caring environment if you believe that learning is a life-long process if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment
We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Job Description Summary: $15,000 SIGN-ON BONUS External applicants and newly licensed internal applicants may be eligible for a $15,000 sign-on bonus with a one-year work commitment. Previously employed applicants who have been gone from the organization more than 90 days may also be eligible. Mansfield Foot & Ankle is hiring a full-time, day shift Radiology Technologist located at their 550 S. Trimble Road location in Mansfield, Ohio. This position will be Monday-Friday with no weekends or holiday coverage and will assist in coverage at the three other office locations in Mansfield, Lexington and Ashland. The Radiology Technologist position prepares patients for examinations and performs diagnostic radiology procedures following guidelines set by OhioHealth and the American Registry of Radiologic Technologists (ARRT). Not only will the selected candidate be responsible for performing diagnostic radiology procedures but will also cross train in the Medical Assistant role in order to keep the workflow moving within the office. The selected candidate must be comfortable working closely with feet as this is a podiatry office. Our team supports four physicians and one nurse practitioner who rotate between the four different locations. Responsibilities And Duties: 40% Performs Diagnostic procedures. Conducts routine radiographic studies in diagnostics. Conducts routine and specialized fluoroscopy studies utilizing digital fluroscope equipment; Maintains proficiency in each of these areas. Provides radiation safety for operator and patient. 40% Obtains diagnostic radiographs Places patient in proper positions for procedures, adhering to department policy regarding routine. Positions anatomical part in position necessary to obtain optimum radiograph. Observes patient throughout procedure and responds to any observed change period manipulates equipment in proper manner, adjust technical factors to assure optimal images, and observes equipment safety. Critiques images inputs through only those optimal for interpretation. Repeats images as necessary. 15% Prepares patients for examination Receives orders/request for procedures from physician, nursing unit, or radiology office and makes necessary entries in electronic medical record. Greets patient and friendly manner and makes positive identification. Explains procedure in clear, understandable terms. Ensures all necessary clothing and jewelry is removed and patient is properly attired. Starts IBS and draws up medications. 5% Performs miscellaneous related duties Assumes duties of electronic imaging technician when necessary. Processes images for interpretation. Imports and burn CDs. Performs QC tests on X ray unit and impacts as necessary. Works with students enrolled in radiography program under program guidelines. Minimum Qualifications: Associate's Degree (Required)ARRT - American Registry of Radiologic Technologists - American Registry of Radiologic Technologists, BLS - Basic Life Support - American Heart Association, ORD - Ohio Radiographers - Ohio Department of Health Additional Job Description: SPECIALIZED KNOWLEDGE Graduate of an approved accredited radiography program. Registered with ARRT; ODH Ohio Radiologic License, BLS certification. Thorough knowledge of various medical imaging procedures and equipment including proper technique and positioning, handling, and administering ionizing radiation to include contrast media agents, radiographic anatomy and physiology and medical terminology. Expresses superior customer service skills. Pleasant demeanor, neat, poised appearance. Ability to function as team member, with limited supervision. Highly motivated with effective written and verbal communication and effective organizational skills. Work Shift: Day Scheduled Weekly Hours : 40 Department Mansfield Foot and Ankle Join us! if your passion is to work in a caring environment if you believe that learning is a life-long process if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment
09/07/2025
Full time
We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Job Description Summary: $15,000 SIGN-ON BONUS External applicants and newly licensed internal applicants may be eligible for a $15,000 sign-on bonus with a one-year work commitment. Previously employed applicants who have been gone from the organization more than 90 days may also be eligible. Mansfield Foot & Ankle is hiring a full-time, day shift Radiology Technologist located at their 550 S. Trimble Road location in Mansfield, Ohio. This position will be Monday-Friday with no weekends or holiday coverage and will assist in coverage at the three other office locations in Mansfield, Lexington and Ashland. The Radiology Technologist position prepares patients for examinations and performs diagnostic radiology procedures following guidelines set by OhioHealth and the American Registry of Radiologic Technologists (ARRT). Not only will the selected candidate be responsible for performing diagnostic radiology procedures but will also cross train in the Medical Assistant role in order to keep the workflow moving within the office. The selected candidate must be comfortable working closely with feet as this is a podiatry office. Our team supports four physicians and one nurse practitioner who rotate between the four different locations. Responsibilities And Duties: 40% Performs Diagnostic procedures. Conducts routine radiographic studies in diagnostics. Conducts routine and specialized fluoroscopy studies utilizing digital fluroscope equipment; Maintains proficiency in each of these areas. Provides radiation safety for operator and patient. 40% Obtains diagnostic radiographs Places patient in proper positions for procedures, adhering to department policy regarding routine. Positions anatomical part in position necessary to obtain optimum radiograph. Observes patient throughout procedure and responds to any observed change period manipulates equipment in proper manner, adjust technical factors to assure optimal images, and observes equipment safety. Critiques images inputs through only those optimal for interpretation. Repeats images as necessary. 15% Prepares patients for examination Receives orders/request for procedures from physician, nursing unit, or radiology office and makes necessary entries in electronic medical record. Greets patient and friendly manner and makes positive identification. Explains procedure in clear, understandable terms. Ensures all necessary clothing and jewelry is removed and patient is properly attired. Starts IBS and draws up medications. 5% Performs miscellaneous related duties Assumes duties of electronic imaging technician when necessary. Processes images for interpretation. Imports and burn CDs. Performs QC tests on X ray unit and impacts as necessary. Works with students enrolled in radiography program under program guidelines. Minimum Qualifications: Associate's Degree (Required)ARRT - American Registry of Radiologic Technologists - American Registry of Radiologic Technologists, BLS - Basic Life Support - American Heart Association, ORD - Ohio Radiographers - Ohio Department of Health Additional Job Description: SPECIALIZED KNOWLEDGE Graduate of an approved accredited radiography program. Registered with ARRT; ODH Ohio Radiologic License, BLS certification. Thorough knowledge of various medical imaging procedures and equipment including proper technique and positioning, handling, and administering ionizing radiation to include contrast media agents, radiographic anatomy and physiology and medical terminology. Expresses superior customer service skills. Pleasant demeanor, neat, poised appearance. Ability to function as team member, with limited supervision. Highly motivated with effective written and verbal communication and effective organizational skills. Work Shift: Day Scheduled Weekly Hours : 40 Department Mansfield Foot and Ankle Join us! if your passion is to work in a caring environment if you believe that learning is a life-long process if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment
We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Job Description Summary: $15,000 SIGN-ON BONUS External applicants may be eligible for a $15,000 sign-on bonus with a one-year work commitment. Previously employed applicants who have been gone from the organization more than 90 days may also be eligible. Come join one of the busiest Radiology departments within the OhioHealth organization at Riverside Methodist Hospital. This 24/7/365-day department averages approximately 130,000 exams per year. Working in a variety of areas, the Radiology Technologists at Riverside gain valuable knowledge and continue to grow on a daily basis. These technologists work in the Emergency Department, Operating Room, Same Day Surgery Center, Endoscopy, use portables to cover the entire hospital (ICU, PACU, NICU, et.), plus work with our inpatient population and outpatient walk-ins. This fast-paced diagnostic department is a great place for a technologist who is looking for variety! This Radiology Technologist prepares patients for examinations and performs diagnostic radiology procedures following guidelines set by OhioHealth and the American Registry of Radiologic Technologists (ARRT). This is a full-time, day shift position working three 12-hour shifts with an every other weekend rotation. Call is required one 8-hour shift per month. Responsibilities And Duties: 40% Performs Diagnostic procedures. Conducts routine radiographic studies in diagnostics. Conducts routine and specialized fluoroscopy studies utilizing digital fluroscope equipment; Maintains proficiency in each of these areas. Provides radiation safety for operator and patient. 40% Obtains diagnostic radiographs Places patient in proper positions for procedures, adhering to department policy regarding routine. Positions anatomical part in position necessary to obtain optimum radiograph. Observes patient throughout procedure and responds to any observed change period manipulates equipment in proper manner, adjust technical factors to assure optimal images, and observes equipment safety. Critiques images inputs through only those optimal for interpretation. Repeats images as necessary. 15% Prepares patients for examination Receives orders/request for procedures from physician, nursing unit, or radiology office and makes necessary entries in electronic medical record. Greets patient and friendly manner and makes positive identification. Explains procedure in clear, understandable terms. Ensures all necessary clothing and jewelry is removed and patient is properly attired. Starts IBS and draws up medications. 5% Performs miscellaneous related duties Assumes duties of electronic imaging technician when necessary. Processes images for interpretation. Imports and burn CDs. Performs QC tests on X ray unit and impacts as necessary. Works with students enrolled in radiography program under program guidelines. Minimum Qualifications: AART-ODH - American Registry of Radiologic Technology - American Association of Radiologic Technologists, BLS - Basic Life Support - American Heart Association Additional Job Description: SPECIALIZED KNOWLEDGE Thorough knowledge of various medical imaging procedures and equipment including proper technique and positioning, handling, and administering ionizing radiation to include contrast media agents, radiographic anatomy and physiology and medical terminology. Expresses superior customer service skills. Pleasant demeanor, neat, poised appearance. Ability to function as team member, with limited supervision. Highly motivated with effective written and verbal communication and effective organizational skills. Work Shift: Day Scheduled Weekly Hours : 36 Department Diagnostics Join us! if your passion is to work in a caring environment if you believe that learning is a life-long process if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment
09/07/2025
Full time
We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Job Description Summary: $15,000 SIGN-ON BONUS External applicants may be eligible for a $15,000 sign-on bonus with a one-year work commitment. Previously employed applicants who have been gone from the organization more than 90 days may also be eligible. Come join one of the busiest Radiology departments within the OhioHealth organization at Riverside Methodist Hospital. This 24/7/365-day department averages approximately 130,000 exams per year. Working in a variety of areas, the Radiology Technologists at Riverside gain valuable knowledge and continue to grow on a daily basis. These technologists work in the Emergency Department, Operating Room, Same Day Surgery Center, Endoscopy, use portables to cover the entire hospital (ICU, PACU, NICU, et.), plus work with our inpatient population and outpatient walk-ins. This fast-paced diagnostic department is a great place for a technologist who is looking for variety! This Radiology Technologist prepares patients for examinations and performs diagnostic radiology procedures following guidelines set by OhioHealth and the American Registry of Radiologic Technologists (ARRT). This is a full-time, day shift position working three 12-hour shifts with an every other weekend rotation. Call is required one 8-hour shift per month. Responsibilities And Duties: 40% Performs Diagnostic procedures. Conducts routine radiographic studies in diagnostics. Conducts routine and specialized fluoroscopy studies utilizing digital fluroscope equipment; Maintains proficiency in each of these areas. Provides radiation safety for operator and patient. 40% Obtains diagnostic radiographs Places patient in proper positions for procedures, adhering to department policy regarding routine. Positions anatomical part in position necessary to obtain optimum radiograph. Observes patient throughout procedure and responds to any observed change period manipulates equipment in proper manner, adjust technical factors to assure optimal images, and observes equipment safety. Critiques images inputs through only those optimal for interpretation. Repeats images as necessary. 15% Prepares patients for examination Receives orders/request for procedures from physician, nursing unit, or radiology office and makes necessary entries in electronic medical record. Greets patient and friendly manner and makes positive identification. Explains procedure in clear, understandable terms. Ensures all necessary clothing and jewelry is removed and patient is properly attired. Starts IBS and draws up medications. 5% Performs miscellaneous related duties Assumes duties of electronic imaging technician when necessary. Processes images for interpretation. Imports and burn CDs. Performs QC tests on X ray unit and impacts as necessary. Works with students enrolled in radiography program under program guidelines. Minimum Qualifications: AART-ODH - American Registry of Radiologic Technology - American Association of Radiologic Technologists, BLS - Basic Life Support - American Heart Association Additional Job Description: SPECIALIZED KNOWLEDGE Thorough knowledge of various medical imaging procedures and equipment including proper technique and positioning, handling, and administering ionizing radiation to include contrast media agents, radiographic anatomy and physiology and medical terminology. Expresses superior customer service skills. Pleasant demeanor, neat, poised appearance. Ability to function as team member, with limited supervision. Highly motivated with effective written and verbal communication and effective organizational skills. Work Shift: Day Scheduled Weekly Hours : 36 Department Diagnostics Join us! if your passion is to work in a caring environment if you believe that learning is a life-long process if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment
Description: In this role, you will be a vital part of our growing pool service company, contributing to our mission of providing exceptional service and repairs to our customers. Your expertise will not only ensure accurate diagnostics and high-quality repairs but will also position you as a mentor to help train and support technicians. With your skills and customer-focused mindset, you will help us maintain excellence and achieve customer satisfaction while playing an integral role in our team's growth and success. Responsibilities: Diagnostics and Repairs: Identify, troubleshoot, and perform repairs on a variety of pool systems and equipment to maintain operational excellence and ensure long-lasting functionality. High-Quality Quotes: Provide clear, detailed, and high-quality repair quotes focused on making pools run efficiently, adhering to current safety standards, and utilizing reputable products with solid warranties. Your quotes should reflect our commitment to excellence and provide customers with confidence in their investments. Customer Communication: Before Service: Communicate with customers ahead of your arrival to confirm the appointment, share your expected arrival time, and address any preliminary questions. During Service: Keep customers informed throughout the troubleshooting process, explaining the issues and recommended solutions clearly and professionally. After Service: Follow up with customers after repairs to ensure satisfaction, address any additional concerns, and provide quotes for further potential work that could improve their pool systems. Maintain open communication to foster trust and long-term relationships. Internal Team Communication: Actively participate in team communication via Slack to ensure seamless collaboration. Share updates on ongoing repairs, ask for or provide troubleshooting support, and communicate relevant details with other technicians and team leaders to maintain operational efficiency. Quality Assurance: Deliver exceptional service and attention to detail to ensure repairs meet or exceed customer expectations, fostering long-term satisfaction. When quality control issues do arise, handle them as a top priority by addressing the problem promptly, communicating openly with customers, and implementing immediate solutions to resolve concerns. Ensure follow-up actions are taken to prevent recurrence and maintain trust in our commitment to excellence. Customer Service: Represent the company professionally by maintaining a customer-first mindset, effectively addressing any service-related concerns, and providing solutions that align with our quality standards. Team Collaboration: Work closely with the service team to support daily operations, share knowledge, and contribute to a collaborative, team-focused work environment. Requirements: Qualifications: Previous experience in pool service and repairs is required. Residential Appliance Installer License (RAIL) preferred. Valid driver's license. Ability to handle a physically demanding workload. A great team-player attitude with the flexibility to wear multiple hats. Strong customer service mindset and communication skills. Desire to be part of a fast-growing, dynamic team. Benefits: Medical, Vision, and Dental Insurance Short and Long Term disability paid for by company Employee Assistance Programs for mental health and wellness Paid Time Off 10 Company Holidays Training and Development Opportunities Employee Purpose Plan Schedule: In Office- at Branch 8:00 am-5:00 pm Monday - Friday PIc553c3dbac46-0729
09/07/2025
Full time
Description: In this role, you will be a vital part of our growing pool service company, contributing to our mission of providing exceptional service and repairs to our customers. Your expertise will not only ensure accurate diagnostics and high-quality repairs but will also position you as a mentor to help train and support technicians. With your skills and customer-focused mindset, you will help us maintain excellence and achieve customer satisfaction while playing an integral role in our team's growth and success. Responsibilities: Diagnostics and Repairs: Identify, troubleshoot, and perform repairs on a variety of pool systems and equipment to maintain operational excellence and ensure long-lasting functionality. High-Quality Quotes: Provide clear, detailed, and high-quality repair quotes focused on making pools run efficiently, adhering to current safety standards, and utilizing reputable products with solid warranties. Your quotes should reflect our commitment to excellence and provide customers with confidence in their investments. Customer Communication: Before Service: Communicate with customers ahead of your arrival to confirm the appointment, share your expected arrival time, and address any preliminary questions. During Service: Keep customers informed throughout the troubleshooting process, explaining the issues and recommended solutions clearly and professionally. After Service: Follow up with customers after repairs to ensure satisfaction, address any additional concerns, and provide quotes for further potential work that could improve their pool systems. Maintain open communication to foster trust and long-term relationships. Internal Team Communication: Actively participate in team communication via Slack to ensure seamless collaboration. Share updates on ongoing repairs, ask for or provide troubleshooting support, and communicate relevant details with other technicians and team leaders to maintain operational efficiency. Quality Assurance: Deliver exceptional service and attention to detail to ensure repairs meet or exceed customer expectations, fostering long-term satisfaction. When quality control issues do arise, handle them as a top priority by addressing the problem promptly, communicating openly with customers, and implementing immediate solutions to resolve concerns. Ensure follow-up actions are taken to prevent recurrence and maintain trust in our commitment to excellence. Customer Service: Represent the company professionally by maintaining a customer-first mindset, effectively addressing any service-related concerns, and providing solutions that align with our quality standards. Team Collaboration: Work closely with the service team to support daily operations, share knowledge, and contribute to a collaborative, team-focused work environment. Requirements: Qualifications: Previous experience in pool service and repairs is required. Residential Appliance Installer License (RAIL) preferred. Valid driver's license. Ability to handle a physically demanding workload. A great team-player attitude with the flexibility to wear multiple hats. Strong customer service mindset and communication skills. Desire to be part of a fast-growing, dynamic team. Benefits: Medical, Vision, and Dental Insurance Short and Long Term disability paid for by company Employee Assistance Programs for mental health and wellness Paid Time Off 10 Company Holidays Training and Development Opportunities Employee Purpose Plan Schedule: In Office- at Branch 8:00 am-5:00 pm Monday - Friday PIc553c3dbac46-0729
L Garde is a full-service design, development, manufacturing, and qual test supplier to Tier 1 primes and government agencies. We provide systems engineering and skilled technicians to make your make your Skunk Works-type project a reality. With over 50 years of aerospace expertise, our deployable systems test the limits of what's possible in the harshest of environments in space, on the moon, and even on other planets. If you're an engineer who thrives on teamwork, clear communication, and seeing your work translate into cutting-edge aerospace solutions, we'd love to talk to you. A Day in the Life: We're looking for a Systems Engineer who is passionate about solving complex challenges in aerospace and enjoys working closely with others to make big ideas a reality. In this role, you'll help transform mission requirements into fully engineered space systems, balancing technical performance, schedule, and cost. You'll collaborate across disciplines-design, test, integration, and program management-to ensure our spacecraft and payload systems meet the highest standards of innovation and reliability. Key Responsibilities: • Lead systems engineering activities across the project lifecycle, from concept through delivery. • Develop and maintain system requirements, CONOPS, ICDs, and risk matrices. • Support Verification & Validation (V&V) efforts and create MBSE models. • Partner with engineers, technicians, suppliers, and customers to resolve issues and ensure requirements are met. • Write and review test plans, procedures, and reports; analyze and post-process test data. • Contribute to design trade studies and product development planning. • Participate in major design reviews (SRR, PDR, CDR, TRR) and customer meetings. • Support proposal writing for advanced aerospace concepts. • Maintain a safe, clean, and organized work area by following 5S and safety guidelines. Who You Are: • You have a Bachelor's degree in engineering, science, or related technical field. • Minimum 6 years of satellite systems engineering experience with DoD, NASA, or commercial space programs. • At least 2 years in management, project leadership, or team leadership roles. • Proficiency with MBSE tools (CAMEO, DOORS) and Microsoft Office. • Hands-on experience with hardware/software interfaces, aerospace drawings, and GD&T standards. • Exposure to SolidWorks CAD, FEA, Matlab, Thermal Desktop, CFD (Star CCM+), or LabView preferred • The ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. • Top Secret Security Clearance a plus. • Excellent written and verbal communication skills. • Strong interpersonal skills with the ability to collaborate across all levels of the organization. • Detail-oriented, organized, and adaptable in a fast-paced environment. • Strong problem-solving mindset and passion for working in a team-driven culture. What We Offer: • Be at the forefront of aerospace innovation by working on cutting-edge aerospace technologies. • Opportunity to wear multiple hats and grow your skill set. • Collaborative and inclusive work culture where your contributions are highly valued. • Competitive salary • Top-Tiered Benefits, 100% of both employee and dependents are covered by the company = Medical, Dental, Vision • Flexible Spending Account • Retirement and Company Match • Company-Sponsored Life and LTD Insurance • Generous Paid Time Off Policy with up to 4 weeks in the first year. • Robust Paid Holiday Schedule Join our team as an Aerospace Systems Engineer II and contribute to the advancement of aerospace innovation by taking on diverse, impactful projects in a collaborative environment, where your contributions are valued and your growth is fostered through hands-on experience. L Garde is an equal opportunity employer, including individuals with disabilities and veterans, and participates in the E-Verify Program.
09/06/2025
Full time
L Garde is a full-service design, development, manufacturing, and qual test supplier to Tier 1 primes and government agencies. We provide systems engineering and skilled technicians to make your make your Skunk Works-type project a reality. With over 50 years of aerospace expertise, our deployable systems test the limits of what's possible in the harshest of environments in space, on the moon, and even on other planets. If you're an engineer who thrives on teamwork, clear communication, and seeing your work translate into cutting-edge aerospace solutions, we'd love to talk to you. A Day in the Life: We're looking for a Systems Engineer who is passionate about solving complex challenges in aerospace and enjoys working closely with others to make big ideas a reality. In this role, you'll help transform mission requirements into fully engineered space systems, balancing technical performance, schedule, and cost. You'll collaborate across disciplines-design, test, integration, and program management-to ensure our spacecraft and payload systems meet the highest standards of innovation and reliability. Key Responsibilities: • Lead systems engineering activities across the project lifecycle, from concept through delivery. • Develop and maintain system requirements, CONOPS, ICDs, and risk matrices. • Support Verification & Validation (V&V) efforts and create MBSE models. • Partner with engineers, technicians, suppliers, and customers to resolve issues and ensure requirements are met. • Write and review test plans, procedures, and reports; analyze and post-process test data. • Contribute to design trade studies and product development planning. • Participate in major design reviews (SRR, PDR, CDR, TRR) and customer meetings. • Support proposal writing for advanced aerospace concepts. • Maintain a safe, clean, and organized work area by following 5S and safety guidelines. Who You Are: • You have a Bachelor's degree in engineering, science, or related technical field. • Minimum 6 years of satellite systems engineering experience with DoD, NASA, or commercial space programs. • At least 2 years in management, project leadership, or team leadership roles. • Proficiency with MBSE tools (CAMEO, DOORS) and Microsoft Office. • Hands-on experience with hardware/software interfaces, aerospace drawings, and GD&T standards. • Exposure to SolidWorks CAD, FEA, Matlab, Thermal Desktop, CFD (Star CCM+), or LabView preferred • The ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. • Top Secret Security Clearance a plus. • Excellent written and verbal communication skills. • Strong interpersonal skills with the ability to collaborate across all levels of the organization. • Detail-oriented, organized, and adaptable in a fast-paced environment. • Strong problem-solving mindset and passion for working in a team-driven culture. What We Offer: • Be at the forefront of aerospace innovation by working on cutting-edge aerospace technologies. • Opportunity to wear multiple hats and grow your skill set. • Collaborative and inclusive work culture where your contributions are highly valued. • Competitive salary • Top-Tiered Benefits, 100% of both employee and dependents are covered by the company = Medical, Dental, Vision • Flexible Spending Account • Retirement and Company Match • Company-Sponsored Life and LTD Insurance • Generous Paid Time Off Policy with up to 4 weeks in the first year. • Robust Paid Holiday Schedule Join our team as an Aerospace Systems Engineer II and contribute to the advancement of aerospace innovation by taking on diverse, impactful projects in a collaborative environment, where your contributions are valued and your growth is fostered through hands-on experience. L Garde is an equal opportunity employer, including individuals with disabilities and veterans, and participates in the E-Verify Program.
Peckham Industries Location: Athens, NY Pay Range: $27.00 - $30.00 Salary Interval: Full Time Description: Application Instructions About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our " family by choice " ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the company's construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Position Description Job Summary: As an IT Help Desk Technician, you will play a crucial role in ensuring the efficient operation of Peckham's IT systems by assisting end-users with technical issues, troubleshooting problems, and providing timely solutions. This role involves responding to user inquiries, diagnosing, and resolving hardware and software problems, and maintaining documentation of support requests. As a Help Desk Technician, you will often work in a fast-paced environment, collaborating with other IT professionals to ensure seamless and productive user experience. This role is also part Field Technician and you will be required to go to site and fix computer issues that are not resolvable remotely. We are looking for someone in our Athens, NY area who is ready, willing, and able to support our users in NY /CT/MA State areas (Athens, Catskill. Rensselaer, Hudson Falls, Chestertown, Pleasant Valley & others if needed). You will be based in our Athens, NY location. You may be able to work from home on some days once trained and will be required to travel to sites which could be up to 2 hours away 40% of the time once you are fully trained. Essential Functions: 1. Committed to serve. Provide a friendly, quick, and helpful first point of contact for end users through our helpdesk via phone, email, and computer chat. Communicate to the end-user the status of their ticket every step of the way, notify them of any changes or outages related to their issue. Provide the client with remote troubleshooting and remote/onsite hardware maintenance and support. 2. Mastery. Use our ticketing system to work on and resolve helpdesk tickets & service requests while effectively documenting end-user interactions, steps taken, and results. Manage and record all work through our ticketing system, making sure that documentation is well-maintained and follow up with customers to ensure issues are resolved. Master tier 1 level incidents and show ability to resolve tier 2 level incidents. 3. Measurement. Establish Key Performance Indicators and maintain First Call Resolution >90%, Customer Satisfaction >90%, Mean time to respond >85%, and minimizing repeat incidents. 4. Results matter. Follow the schedule provided by the Senior Service Delivery Manager. Follow Standard Operating Procedures (SOPs) for daily/weekly recurring tasks. Submit timesheets & expense reports as indicated on their SOPs. 5. Ownership and Caring. Maintain technical documentation and service catalog on installation of software, configuration of hardware and problem troubleshooting. Escalate issues to the next tier with the next level of difficulty. 6. Dedication. Assist with delivering projects on-site or remotely when needed. Provide knowledgebase articles for technical team and users. 7. Innovation. Follow all our security procedures and keep a vigilant eye on security issues by identifying, communicating, and mitigating potential risks to the Service Delivery Manager. Identify opportunities for improvement and make constructive suggestions for change. 8. Loyalty. Act as local resource for Automation and Infrastructure problems. Position Requirements Requirements, Education and Experience: 1. 0-5 Years experience working either on a Helpdesk or for a Managed Service Provider (MSP)/IT Support Business; preferred. Experience using a Ticketing system / RMM Tool software, providing support via remote tools and handling Technical Service Tickets a plus. Must possess excellent organizational skills to keep Help desk tickets in order and updated. 2. In-depth knowledge of diagnosing and resolving technical issues with computer systems and mobile devices onsite and remotely. 3. Proficiency with Windows Desktop & Server environments, Apple Computers & Apple /Android mobile devices, a plus. 4. Understanding of support tools, techniques, and how technology is used to provide services. 5. Understanding of operating systems, business applications, printing systems, and network systems including diagnosing technical issues related to end-user hardware/software and network devices. Advanced experience working with the Microsoft 365 Platform preferred. 6. Must have excellent interpersonal communication skills and the ability to communicate with both technical and non-technical personnel with a patient and customer-oriented attitude. Proficiency in English spoken and written, a must. 7. Must have flexibility to work variable shifts and overtime as needed. 8. IT literate - Advanced user level. The ability to keep up with & adapt to the fast-paced IT world preferred. 9. Professional certifications such as Microsoft MCP, MCSA or MCSE, ITIL, ITSM, Comp TIA +, Helpdesk Habits etc. a plus. 10. Must have a valid driver's license and own reliable transportation. 11. Must be authorized to work in the U.S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require up to 40% travel by personal vehicle to offices throughout the state of New York, and New England based on the needs of the business. Must have your own, reliable transportation. Will reimburse mileage. Work Environment/Physical Demands: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers. This is mostly sedentary, outside of travel, in an office space. The abilities to sit at a desk, frequent walking, bending, or standing, as necessary, are required. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. Equal Opportunity Employer Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact . Compensation details: 27-30 Hourly Wage PI0ef21c4dbc3e-2416
09/06/2025
Full time
Peckham Industries Location: Athens, NY Pay Range: $27.00 - $30.00 Salary Interval: Full Time Description: Application Instructions About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our " family by choice " ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the company's construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Position Description Job Summary: As an IT Help Desk Technician, you will play a crucial role in ensuring the efficient operation of Peckham's IT systems by assisting end-users with technical issues, troubleshooting problems, and providing timely solutions. This role involves responding to user inquiries, diagnosing, and resolving hardware and software problems, and maintaining documentation of support requests. As a Help Desk Technician, you will often work in a fast-paced environment, collaborating with other IT professionals to ensure seamless and productive user experience. This role is also part Field Technician and you will be required to go to site and fix computer issues that are not resolvable remotely. We are looking for someone in our Athens, NY area who is ready, willing, and able to support our users in NY /CT/MA State areas (Athens, Catskill. Rensselaer, Hudson Falls, Chestertown, Pleasant Valley & others if needed). You will be based in our Athens, NY location. You may be able to work from home on some days once trained and will be required to travel to sites which could be up to 2 hours away 40% of the time once you are fully trained. Essential Functions: 1. Committed to serve. Provide a friendly, quick, and helpful first point of contact for end users through our helpdesk via phone, email, and computer chat. Communicate to the end-user the status of their ticket every step of the way, notify them of any changes or outages related to their issue. Provide the client with remote troubleshooting and remote/onsite hardware maintenance and support. 2. Mastery. Use our ticketing system to work on and resolve helpdesk tickets & service requests while effectively documenting end-user interactions, steps taken, and results. Manage and record all work through our ticketing system, making sure that documentation is well-maintained and follow up with customers to ensure issues are resolved. Master tier 1 level incidents and show ability to resolve tier 2 level incidents. 3. Measurement. Establish Key Performance Indicators and maintain First Call Resolution >90%, Customer Satisfaction >90%, Mean time to respond >85%, and minimizing repeat incidents. 4. Results matter. Follow the schedule provided by the Senior Service Delivery Manager. Follow Standard Operating Procedures (SOPs) for daily/weekly recurring tasks. Submit timesheets & expense reports as indicated on their SOPs. 5. Ownership and Caring. Maintain technical documentation and service catalog on installation of software, configuration of hardware and problem troubleshooting. Escalate issues to the next tier with the next level of difficulty. 6. Dedication. Assist with delivering projects on-site or remotely when needed. Provide knowledgebase articles for technical team and users. 7. Innovation. Follow all our security procedures and keep a vigilant eye on security issues by identifying, communicating, and mitigating potential risks to the Service Delivery Manager. Identify opportunities for improvement and make constructive suggestions for change. 8. Loyalty. Act as local resource for Automation and Infrastructure problems. Position Requirements Requirements, Education and Experience: 1. 0-5 Years experience working either on a Helpdesk or for a Managed Service Provider (MSP)/IT Support Business; preferred. Experience using a Ticketing system / RMM Tool software, providing support via remote tools and handling Technical Service Tickets a plus. Must possess excellent organizational skills to keep Help desk tickets in order and updated. 2. In-depth knowledge of diagnosing and resolving technical issues with computer systems and mobile devices onsite and remotely. 3. Proficiency with Windows Desktop & Server environments, Apple Computers & Apple /Android mobile devices, a plus. 4. Understanding of support tools, techniques, and how technology is used to provide services. 5. Understanding of operating systems, business applications, printing systems, and network systems including diagnosing technical issues related to end-user hardware/software and network devices. Advanced experience working with the Microsoft 365 Platform preferred. 6. Must have excellent interpersonal communication skills and the ability to communicate with both technical and non-technical personnel with a patient and customer-oriented attitude. Proficiency in English spoken and written, a must. 7. Must have flexibility to work variable shifts and overtime as needed. 8. IT literate - Advanced user level. The ability to keep up with & adapt to the fast-paced IT world preferred. 9. Professional certifications such as Microsoft MCP, MCSA or MCSE, ITIL, ITSM, Comp TIA +, Helpdesk Habits etc. a plus. 10. Must have a valid driver's license and own reliable transportation. 11. Must be authorized to work in the U.S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require up to 40% travel by personal vehicle to offices throughout the state of New York, and New England based on the needs of the business. Must have your own, reliable transportation. Will reimburse mileage. Work Environment/Physical Demands: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers. This is mostly sedentary, outside of travel, in an office space. The abilities to sit at a desk, frequent walking, bending, or standing, as necessary, are required. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. Equal Opportunity Employer Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact . Compensation details: 27-30 Hourly Wage PI0ef21c4dbc3e-2416
Arizona State University Energy Management Specialist (Building Automation and Control Technician) - Tempe campus Campus: Tempe JR111939 End Date: September 18, 2025 Apply before 11:59 PM Arizona time the day before the posted End Date. Minimum Qualifications: Associate's degree and one (1) year of experience appropriate to the area of assignment/field; OR, Any equivalent combination of experience and/or training from which comparable knowledge, skills and abilities have been achieved. Job Description: Facilities Management, Knowledge Enterprise Research Facilities Services, seeks an Energy Management Specialist (Building Automation and Control Technician) to perform work of a complex nature when operating, maintaining, and programming energy management and building automation systems that support various types of research, including the newest research building ISTB12 at the Polytechnic campus, which will support engineering laboratories, cleanrooms, robotics, and battery research labs. This position will also support other research buildings at ASU's Tempe campus. Essential Duties: Perform air pressure, airflow measurements and make adjustments to meet standards. Monitor and adjust systems to meet comfort level, laboratory environment. Evaluate systems for effective energy usage and conservation; make, adjust, repair, replace as needed. Use software and hardware in computers and microprocessors for system programming. Modify existing programs, troubleshooting to maintain optimum system operation. Perform database uploads and downloads to provide DDC controllers with current programs. Verify correct system and control sequence operations. Update air handlers' schedules upon request for air conditioning services. Provide reports by accumulating data from multiple automation systems and/or software support programs. Review, modify, and implement programming changes to building automation system to ensure efficient and effective system operations and conformance with standards and guidelines and energy savings. Calibrate, repair, and replace building automation system sensing devices to specifications. May dispatch trouble calls to appropriate personnel to respond to customer needs. Study plans, drawings, specifications, and work order requirements. Troubleshoot power supplies, controllers, and transducers; take corrective actions. Use ability to communicate verbally, read, write, see and hear to perform essential functions of the job. Days and Schedule: Monday - Friday 8:00 a.m. - 5:00 p.m. Salary Ranges: $28.50 - $40.31 per hour DOE. ASU offers a comprehensive benefits package with the State of Arizona. Desired Qualifications: Experience with Siemens Building Automation Systems. Evidence of Niagara AX certification. May need to obtain EPA 608 Universal Chlorofluorocarbon Certification Working Environment: Work in extreme and varying temperatures, restricted movements, confined spaces (tunnels, manholes, vaults), and intense noise. Frequent bending, stooping, reaching, lifting, pushing and pulling up to 60 pounds is required. Work off ladders to download/upload field controls and relocate/install thermostats. Utilize hand tools (wire strippers, screwdrivers, pliers, wrenches, volt amp meter, temperature/humidity calibrator) and power tools (drill). Utilize computer (primarily Johnson Control and Phoenix Control software, but not limited to other third party control systems) to operate plant and building automation systems. Wear personal protective equipment (e.g. safety glasses, face shield, gloves, safety shoes, noise protection). Drive University vehicle and/or cart to job site. The noise level in the work environment is usually moderate to loud. May be exposed to hazardous and dangerous materials, tools, and equipment which will require safety precautions and/or specific process to be followed, and may include the use of Personal Protection Equipment (PPE) (e.g. safety glasses, hearing protection, negative pressure and positive pressure respirator). Use of PPE may require medical clearance prior to use. Department Statement: What's in it for you? Looking for an employer that offers you solid growth opportunities, as well as an inclusive culture and work/life balance? ASU offers the following: Flexible work schedules 22 days of accrued vacation leave, 12 days of accrued sick leave and 10 paid holidays annually for all staff. Tuition Reduction Program for staff members, their spouses, and dependents, available on day one. For more information visit 12 weeks of paid parental leave following the birth or adoption of a child Affordable benefits package including dental, vision, and life insurance benefits. More information available at Retirement program designed to promote long-term savings and provide income upon retirement which includes Arizona State Retirement System (ASRS) Paid time for volunteer and professional development Wellness program for preventative health education and screenings Disability and leave program for income protection Free and confidential Employee Assistance services, helping to manage personal difficulties or life challenges ASU Discounts to sports/events along with discounts with ASU partnerships ASU Facilities Development and Management (FDM) maintains and services all university-owned property, and develops and constructs innovative and sustainable facilities. FDM's vision is to contribute to and guarantee the success of the university's mission by creating and caring for the ASU campus and environment. We provide quality customer service, effectively steward our resources, and meet the needs of the university through creative and collaborative efforts. Facilities Development and Management at ASU employment requires current eligibility to legally work in the United States. Facilities Development and Management will not be a sponsor for this position. This position is located at the Tempe campus. Must possess a valid Arizona driver's license upon employment and maintain throughout employment. Post-offer of employment, selected candidate must possess an acceptable driving record which is 5 or fewer points in the most recent 39 month period from date of hire. Must pass pre-employment physical examination post offer of employment to include asbestos worker clearance, respiratory clearance questionnaire and respiratory fit test. This position requires working on-call and stand-by when necessary, including nights, weekends, and holidays. This position is considered safety/security sensitive and will include a fingerprint check. Employment is contingent upon successful passing of all background, including fingerprint checks. Driving Requirement: This position may require driving. Employee must possess a valid US Driver's license of the appropriate class and required endorsements throughout employment. Location: Campus: Tempe Funding: No Federal Funding Instructions to Apply: Current Employees and Students should apply directly within Workday using the Jobs Hub. Use this link and log in using SSO: $9925/9925$12442.htmld To be considered, your application must include all of the following attachments: Cover letter Resume/CV Note: Multiple documents can be submitted into the attachment box. Alternatively, merge all documents into one PDF for submission. Please include all employment information in month/year format (e.g., 6/88 to 8/94), job title, job duties and name of employer for each position. Resume should clearly illustrate how prior knowledge and experience meets the Minimum and Desired qualifications of this position. NOTE: GA and Intern positions are counted as .5 for job experience (ie. 1 year equals 6 months experience equivalency). Only electronic applications are accepted for this position. Need help finding the right job? We can recommend jobs specifically for you! Create a custom Job Alert by selecting criteria that suit your career interests. ASU Statement: Arizona State University is a new model for American higher education, an unprecedented combination of academic excellence, entrepreneurial energy and broad access. This New American University is a single, unified institution comprising four differentiated campuses positively impacting the economic, social, cultural and environmental health of the communities it serves. Its research is inspired by real world application blurring the boundaries that traditionally separate academic disciplines. ASU serves more than 100,000 students in metropolitan Phoenix, Arizona, the nation's fifth largest city. ASU champions inclusive excellence, and welcomes students from all fifty states and more than one hundred nations across the globe. ASU is a tobacco-free university. For details visit All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other basis protected by law. Notice of Availability of the ASU Annual Security and Fire Safety Report: In compliance with federal law, ASU prepares an annual report on campus security and fire safety programs and resources. ASU's Annual Security and Fire Safety Report is available online at You may request a hard copy of the report by contacting the ASU Police Department at . Relocation Assistance - For information about schools, housing child resources, neighborhoods, hospitals, community events, and taxes, visit Employment Verification Statement: ASU conducts pre-employment screening which may include verification of work history, academic credentials, licenses, and certifications . click apply for full job details
09/05/2025
Full time
Arizona State University Energy Management Specialist (Building Automation and Control Technician) - Tempe campus Campus: Tempe JR111939 End Date: September 18, 2025 Apply before 11:59 PM Arizona time the day before the posted End Date. Minimum Qualifications: Associate's degree and one (1) year of experience appropriate to the area of assignment/field; OR, Any equivalent combination of experience and/or training from which comparable knowledge, skills and abilities have been achieved. Job Description: Facilities Management, Knowledge Enterprise Research Facilities Services, seeks an Energy Management Specialist (Building Automation and Control Technician) to perform work of a complex nature when operating, maintaining, and programming energy management and building automation systems that support various types of research, including the newest research building ISTB12 at the Polytechnic campus, which will support engineering laboratories, cleanrooms, robotics, and battery research labs. This position will also support other research buildings at ASU's Tempe campus. Essential Duties: Perform air pressure, airflow measurements and make adjustments to meet standards. Monitor and adjust systems to meet comfort level, laboratory environment. Evaluate systems for effective energy usage and conservation; make, adjust, repair, replace as needed. Use software and hardware in computers and microprocessors for system programming. Modify existing programs, troubleshooting to maintain optimum system operation. Perform database uploads and downloads to provide DDC controllers with current programs. Verify correct system and control sequence operations. Update air handlers' schedules upon request for air conditioning services. Provide reports by accumulating data from multiple automation systems and/or software support programs. Review, modify, and implement programming changes to building automation system to ensure efficient and effective system operations and conformance with standards and guidelines and energy savings. Calibrate, repair, and replace building automation system sensing devices to specifications. May dispatch trouble calls to appropriate personnel to respond to customer needs. Study plans, drawings, specifications, and work order requirements. Troubleshoot power supplies, controllers, and transducers; take corrective actions. Use ability to communicate verbally, read, write, see and hear to perform essential functions of the job. Days and Schedule: Monday - Friday 8:00 a.m. - 5:00 p.m. Salary Ranges: $28.50 - $40.31 per hour DOE. ASU offers a comprehensive benefits package with the State of Arizona. Desired Qualifications: Experience with Siemens Building Automation Systems. Evidence of Niagara AX certification. May need to obtain EPA 608 Universal Chlorofluorocarbon Certification Working Environment: Work in extreme and varying temperatures, restricted movements, confined spaces (tunnels, manholes, vaults), and intense noise. Frequent bending, stooping, reaching, lifting, pushing and pulling up to 60 pounds is required. Work off ladders to download/upload field controls and relocate/install thermostats. Utilize hand tools (wire strippers, screwdrivers, pliers, wrenches, volt amp meter, temperature/humidity calibrator) and power tools (drill). Utilize computer (primarily Johnson Control and Phoenix Control software, but not limited to other third party control systems) to operate plant and building automation systems. Wear personal protective equipment (e.g. safety glasses, face shield, gloves, safety shoes, noise protection). Drive University vehicle and/or cart to job site. The noise level in the work environment is usually moderate to loud. May be exposed to hazardous and dangerous materials, tools, and equipment which will require safety precautions and/or specific process to be followed, and may include the use of Personal Protection Equipment (PPE) (e.g. safety glasses, hearing protection, negative pressure and positive pressure respirator). Use of PPE may require medical clearance prior to use. Department Statement: What's in it for you? Looking for an employer that offers you solid growth opportunities, as well as an inclusive culture and work/life balance? ASU offers the following: Flexible work schedules 22 days of accrued vacation leave, 12 days of accrued sick leave and 10 paid holidays annually for all staff. Tuition Reduction Program for staff members, their spouses, and dependents, available on day one. For more information visit 12 weeks of paid parental leave following the birth or adoption of a child Affordable benefits package including dental, vision, and life insurance benefits. More information available at Retirement program designed to promote long-term savings and provide income upon retirement which includes Arizona State Retirement System (ASRS) Paid time for volunteer and professional development Wellness program for preventative health education and screenings Disability and leave program for income protection Free and confidential Employee Assistance services, helping to manage personal difficulties or life challenges ASU Discounts to sports/events along with discounts with ASU partnerships ASU Facilities Development and Management (FDM) maintains and services all university-owned property, and develops and constructs innovative and sustainable facilities. FDM's vision is to contribute to and guarantee the success of the university's mission by creating and caring for the ASU campus and environment. We provide quality customer service, effectively steward our resources, and meet the needs of the university through creative and collaborative efforts. Facilities Development and Management at ASU employment requires current eligibility to legally work in the United States. Facilities Development and Management will not be a sponsor for this position. This position is located at the Tempe campus. Must possess a valid Arizona driver's license upon employment and maintain throughout employment. Post-offer of employment, selected candidate must possess an acceptable driving record which is 5 or fewer points in the most recent 39 month period from date of hire. Must pass pre-employment physical examination post offer of employment to include asbestos worker clearance, respiratory clearance questionnaire and respiratory fit test. This position requires working on-call and stand-by when necessary, including nights, weekends, and holidays. This position is considered safety/security sensitive and will include a fingerprint check. Employment is contingent upon successful passing of all background, including fingerprint checks. Driving Requirement: This position may require driving. Employee must possess a valid US Driver's license of the appropriate class and required endorsements throughout employment. Location: Campus: Tempe Funding: No Federal Funding Instructions to Apply: Current Employees and Students should apply directly within Workday using the Jobs Hub. Use this link and log in using SSO: $9925/9925$12442.htmld To be considered, your application must include all of the following attachments: Cover letter Resume/CV Note: Multiple documents can be submitted into the attachment box. Alternatively, merge all documents into one PDF for submission. Please include all employment information in month/year format (e.g., 6/88 to 8/94), job title, job duties and name of employer for each position. Resume should clearly illustrate how prior knowledge and experience meets the Minimum and Desired qualifications of this position. NOTE: GA and Intern positions are counted as .5 for job experience (ie. 1 year equals 6 months experience equivalency). Only electronic applications are accepted for this position. Need help finding the right job? We can recommend jobs specifically for you! Create a custom Job Alert by selecting criteria that suit your career interests. ASU Statement: Arizona State University is a new model for American higher education, an unprecedented combination of academic excellence, entrepreneurial energy and broad access. This New American University is a single, unified institution comprising four differentiated campuses positively impacting the economic, social, cultural and environmental health of the communities it serves. Its research is inspired by real world application blurring the boundaries that traditionally separate academic disciplines. ASU serves more than 100,000 students in metropolitan Phoenix, Arizona, the nation's fifth largest city. ASU champions inclusive excellence, and welcomes students from all fifty states and more than one hundred nations across the globe. ASU is a tobacco-free university. For details visit All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other basis protected by law. Notice of Availability of the ASU Annual Security and Fire Safety Report: In compliance with federal law, ASU prepares an annual report on campus security and fire safety programs and resources. ASU's Annual Security and Fire Safety Report is available online at You may request a hard copy of the report by contacting the ASU Police Department at . Relocation Assistance - For information about schools, housing child resources, neighborhoods, hospitals, community events, and taxes, visit Employment Verification Statement: ASU conducts pre-employment screening which may include verification of work history, academic credentials, licenses, and certifications . click apply for full job details
Description: Now Hiring: Automotive Service Advisor / Service Writer SW Rockford Suburbs Full-Time Weekends Off! $18.00 - $25.00/hr + Bonus Are you a customer-focused professional with a passion for the automotive industry? A well-established, full-service auto repair shop in the SW Rockford Suburbs is looking for a motivated and experienced Automotive Service Advisor to join our growing team. We're looking for someone who takes pride in delivering exceptional customer service, thrives in a fast-paced environment, and is ready to grow with a team that values integrity, teamwork, and excellence. What You'll Do Greet and assist customers with professionalism and care Communicate clearly with technicians and customers about vehicle needs and repair timelines Build trust and long-term relationships with customers Help maintain a smooth and efficient workflow in the shop What We're Looking For 1+ years of experience as a Service Advisor, Service Writer, or in a similar customer-facing automotive role Sales experience or a strong ability to lead and sell services Excellent communication and organizational skills A valid driver's license and clean driving record A team player with a positive attitude and strong work ethic What We Offer $18-$25/hr + Bonus Opportunities Full Benefits Package - Available Day 1! Medical, Dental, Vision Short & Long-Term Disability $25K Employer-Paid Life & AD&D 401K with Match (after 90 days) 1 Week Paid Paternal Leave 80 Hours of Front-Loaded PTO + 6 Paid Holidays NO WEEKENDS - We're Closed Saturdays & Sundays! Career Growth & Training Sponsored onsite and offsite training Advancement opportunities within a growing network If you're ready to join a team that values your contributions, supports your growth, and treats you like family-apply today and take the next step in your automotive career! Requirements: Compensation details: 18-25 Hourly Wage PI476ebba9cc27-3994
09/05/2025
Full time
Description: Now Hiring: Automotive Service Advisor / Service Writer SW Rockford Suburbs Full-Time Weekends Off! $18.00 - $25.00/hr + Bonus Are you a customer-focused professional with a passion for the automotive industry? A well-established, full-service auto repair shop in the SW Rockford Suburbs is looking for a motivated and experienced Automotive Service Advisor to join our growing team. We're looking for someone who takes pride in delivering exceptional customer service, thrives in a fast-paced environment, and is ready to grow with a team that values integrity, teamwork, and excellence. What You'll Do Greet and assist customers with professionalism and care Communicate clearly with technicians and customers about vehicle needs and repair timelines Build trust and long-term relationships with customers Help maintain a smooth and efficient workflow in the shop What We're Looking For 1+ years of experience as a Service Advisor, Service Writer, or in a similar customer-facing automotive role Sales experience or a strong ability to lead and sell services Excellent communication and organizational skills A valid driver's license and clean driving record A team player with a positive attitude and strong work ethic What We Offer $18-$25/hr + Bonus Opportunities Full Benefits Package - Available Day 1! Medical, Dental, Vision Short & Long-Term Disability $25K Employer-Paid Life & AD&D 401K with Match (after 90 days) 1 Week Paid Paternal Leave 80 Hours of Front-Loaded PTO + 6 Paid Holidays NO WEEKENDS - We're Closed Saturdays & Sundays! Career Growth & Training Sponsored onsite and offsite training Advancement opportunities within a growing network If you're ready to join a team that values your contributions, supports your growth, and treats you like family-apply today and take the next step in your automotive career! Requirements: Compensation details: 18-25 Hourly Wage PI476ebba9cc27-3994
Overview M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission critical facilities, secure environments, complex infrastructure, and global enterprises. The company's capabilities include electrical, electronic security, telecommunications, life safety, automation and controls, audio visual, and IT systems. M.C. Dean is headquartered in Tysons, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Why join M.C. Dean? Our people are inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. The Critical Power Group is responsible for maintaining, servicing, and troubleshooting UPS systems, batteries, and other critical infrastructure equipment. Our technicians are factory trained on most major UPS manufacturers of static equipment (e.g., Ametek, SCI, Cyberex, Toshiba, Mitsubishi, Gutor, APC, MGE, Schneider Electric, Powerware/Eaton to name a few). Our technicians perform preventive maintenance and equipment testing as well as emergency service calls at high profile government, institutional and commercial customer facilities. The Critical Power Group also provides engineering and technical support to customers and other divisions of M.C. Dean, Inc. Responsibilities 100% travel within the United States. Daily travel with independent work structure Emergency call availability 24/7 unless on PTO or Off Call. Maintain/safeguard company issued equipment, tools, and instruments Battery Repair & Replacement; installations and replacements. Perform required preventative maintenance service to equipment under contract as scheduled. Customer contact and interface. Communicate availability status to corporate office. Communicate availability status to Team Lead or manager Protect company proprietary information, manuals, and records Use of electronic and electrical test equipment as necessary Coordinate and manage all on-site subcontractors hired by M.C. Dean as necessary Maintain company or personal vehicle in safe and operational condition; maintain insurance as required by company. Ensure that work is performed to M.C. Dean Standards Complete all paperwork, including Field Service Reports, Time Sheets, and Expense Reports, and other job required reports timely and accurately Provide technical support to customers upon request. Maintain Technical documentation for study and/or review. Willing and able to attend product specific training as company deems necessary. Cross train other (UPS technicians) as needed. Other duties as required. Inspects power electronic systems and their associated controls. Typical systems include but are not limited to UPS systems, battery systems associated with power backup systems, Static Transfer Switches, Power Distribution Units, and their associated controls. Inspections include, but are not limited to Initial, In-process, Visual Condition, and Final Inspections, Maintenance Operational Checks, and Failure Analysis, and repairs. Certifies by signature to the customer that systems and components adhere to quality standards established by applicable codes, publications, checklists and specifications. Reviews and checks system drawings and specifications for accuracy and completeness. Technician will determine maintenance requirements, inspection requirements, and compliance with technical resolved discrepancies between recorded and actual system components by research with owner/manufacturer or by physical inspection. Corrects and certifies changes entered for record. Provides technical assistance and expertise on power electronic devices to owners and engineers. Technician must perform inspections, technical assistance, maintenance assistance, and instruction of site personnel, advises site personnel on proper maintenance practices, procedures, and techniques. Reviews and interprets existing technical publications applicable to inspection, modification, and maintenance of power electronics. Resolves technical problems encountered. Prepares reports of findings and makes recommendations on system improvements and implementing quality control programs. The physical demands are represented of those that must be met by an employee to successfully perform the essential functions of the job, including lifting and installing batteries. Company expects the employee to observe all safety standards. Maintains operational expertise with the following instruments: Digital Multi-meter Power Analyzer Infrared Camera Digital Camera Insulation Test Equipment EMI/EMF Meters Battery Test Equipment (Alber/Midtronics) Oscilloscope Requires 7X24X365 availability when on call. Job Position may require overnight travel at company expense Performs other duties as assigned. Supervisory Controls: Work is performed under general supervision of the Regional Mangers and Team Leads. Technician receives assignments in terms of schedules, priorities, and general instructions pertaining to special problem areas. Is afforded freedom of action within the framework of established policies, procedures, and production schedules, accomplishing assignments on own initiative. Completed work is subject to review for adherence to policy, soundness of recommendations, and overall accomplishment of organizational tasks and functions. The primary purpose of this position is to provide inspection and certification of power electronics and their key components. The end goal is to obtain reliability, availability & quality of power while improving or sustaining the maintainability of the electrical system. Qualifications AA/BS degree in Electrical and/or Electronics from an accredited college or university, or equivalent field or military training. This position requires at least 5+ years of experience with various UPS systems, batteries, test equipment, and associated electrical apparatuses like switchgears, panels, breakers, disconnects, ATSs, and generators. Candidate Expectations: Proficiency in reading and interpreting complex technical instructions, plans blueprints, and schematic diagrams. Strong working knowledge of NEC, maintenance practices, maintenance and supply procedures, and quality control procedures. Demonstrated ability to evaluate complex electrical systems, perform damage assessments, estimate maintenance, parts, and manpower requirements, diagnose malfunctions, and employ testing and inspection techniques. Use of laptop computer, various software packages and other electronic communication devices will be required. Requires strong written and oral communication skills. Future training and certification requirements: Various Manufacturer Maintenance Courses, Power Quality Training Course/Certification. Technician preferred to be proficient in Microsoft Office products. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: Lifts at least 100 pounds at one time and 60 pounds for an extended period. Relocates a 12-foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls, and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.
09/03/2025
Full time
Overview M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission critical facilities, secure environments, complex infrastructure, and global enterprises. The company's capabilities include electrical, electronic security, telecommunications, life safety, automation and controls, audio visual, and IT systems. M.C. Dean is headquartered in Tysons, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Why join M.C. Dean? Our people are inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. The Critical Power Group is responsible for maintaining, servicing, and troubleshooting UPS systems, batteries, and other critical infrastructure equipment. Our technicians are factory trained on most major UPS manufacturers of static equipment (e.g., Ametek, SCI, Cyberex, Toshiba, Mitsubishi, Gutor, APC, MGE, Schneider Electric, Powerware/Eaton to name a few). Our technicians perform preventive maintenance and equipment testing as well as emergency service calls at high profile government, institutional and commercial customer facilities. The Critical Power Group also provides engineering and technical support to customers and other divisions of M.C. Dean, Inc. Responsibilities 100% travel within the United States. Daily travel with independent work structure Emergency call availability 24/7 unless on PTO or Off Call. Maintain/safeguard company issued equipment, tools, and instruments Battery Repair & Replacement; installations and replacements. Perform required preventative maintenance service to equipment under contract as scheduled. Customer contact and interface. Communicate availability status to corporate office. Communicate availability status to Team Lead or manager Protect company proprietary information, manuals, and records Use of electronic and electrical test equipment as necessary Coordinate and manage all on-site subcontractors hired by M.C. Dean as necessary Maintain company or personal vehicle in safe and operational condition; maintain insurance as required by company. Ensure that work is performed to M.C. Dean Standards Complete all paperwork, including Field Service Reports, Time Sheets, and Expense Reports, and other job required reports timely and accurately Provide technical support to customers upon request. Maintain Technical documentation for study and/or review. Willing and able to attend product specific training as company deems necessary. Cross train other (UPS technicians) as needed. Other duties as required. Inspects power electronic systems and their associated controls. Typical systems include but are not limited to UPS systems, battery systems associated with power backup systems, Static Transfer Switches, Power Distribution Units, and their associated controls. Inspections include, but are not limited to Initial, In-process, Visual Condition, and Final Inspections, Maintenance Operational Checks, and Failure Analysis, and repairs. Certifies by signature to the customer that systems and components adhere to quality standards established by applicable codes, publications, checklists and specifications. Reviews and checks system drawings and specifications for accuracy and completeness. Technician will determine maintenance requirements, inspection requirements, and compliance with technical resolved discrepancies between recorded and actual system components by research with owner/manufacturer or by physical inspection. Corrects and certifies changes entered for record. Provides technical assistance and expertise on power electronic devices to owners and engineers. Technician must perform inspections, technical assistance, maintenance assistance, and instruction of site personnel, advises site personnel on proper maintenance practices, procedures, and techniques. Reviews and interprets existing technical publications applicable to inspection, modification, and maintenance of power electronics. Resolves technical problems encountered. Prepares reports of findings and makes recommendations on system improvements and implementing quality control programs. The physical demands are represented of those that must be met by an employee to successfully perform the essential functions of the job, including lifting and installing batteries. Company expects the employee to observe all safety standards. Maintains operational expertise with the following instruments: Digital Multi-meter Power Analyzer Infrared Camera Digital Camera Insulation Test Equipment EMI/EMF Meters Battery Test Equipment (Alber/Midtronics) Oscilloscope Requires 7X24X365 availability when on call. Job Position may require overnight travel at company expense Performs other duties as assigned. Supervisory Controls: Work is performed under general supervision of the Regional Mangers and Team Leads. Technician receives assignments in terms of schedules, priorities, and general instructions pertaining to special problem areas. Is afforded freedom of action within the framework of established policies, procedures, and production schedules, accomplishing assignments on own initiative. Completed work is subject to review for adherence to policy, soundness of recommendations, and overall accomplishment of organizational tasks and functions. The primary purpose of this position is to provide inspection and certification of power electronics and their key components. The end goal is to obtain reliability, availability & quality of power while improving or sustaining the maintainability of the electrical system. Qualifications AA/BS degree in Electrical and/or Electronics from an accredited college or university, or equivalent field or military training. This position requires at least 5+ years of experience with various UPS systems, batteries, test equipment, and associated electrical apparatuses like switchgears, panels, breakers, disconnects, ATSs, and generators. Candidate Expectations: Proficiency in reading and interpreting complex technical instructions, plans blueprints, and schematic diagrams. Strong working knowledge of NEC, maintenance practices, maintenance and supply procedures, and quality control procedures. Demonstrated ability to evaluate complex electrical systems, perform damage assessments, estimate maintenance, parts, and manpower requirements, diagnose malfunctions, and employ testing and inspection techniques. Use of laptop computer, various software packages and other electronic communication devices will be required. Requires strong written and oral communication skills. Future training and certification requirements: Various Manufacturer Maintenance Courses, Power Quality Training Course/Certification. Technician preferred to be proficient in Microsoft Office products. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: Lifts at least 100 pounds at one time and 60 pounds for an extended period. Relocates a 12-foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls, and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.
Description: Position Summary: The Senior Maintenance Technician reports to the Facilities Manager and is responsible for performing routine building maintenance tasks and preventive maintenance in a timely and accurate manner. Performance of building maintenance tasks will include one or more fields (e.g., carpentry; electrical; heating, ventilation, and air conditioning (HVAC). Support the needs of the business and general work requirements as assigned. Follow all safety procedures and work in a fast-paced team environment. Position Responsibilities: Complete Facility Tree work orders including, but not limited to electrical, plumbing, HVAC, drywall, painting, and appliances. Electrical- perform routine electrical repairs such as: wiring, fuses, fixtures and sockets, and repair/install/service HVAC systems. Plumbing- perform routine plumbing repairs such as: replace/repair/service water heaters, clear drainlines, and replace broken pipes, worn out washers- gaskets and or faucets and floats. Carpentry- perform routine carpentry repair such as: kitchen cabinets, window screens/glass, door locks, and plaster/drywall, trim, flooring. Mechanical- perform routine mechanical repair such as: repair/diagnose all major appliances, HVAC, and other needed power tools. Other unskilled tasks such as: interior and exterior painting, floor tile installation and repair, interior cleaning, tree/shrub trimming, debris removal. Inventory- identifying, cataloging, and procuring necessary materials used in maintenance operation Perform preventative maintenance and general repairs of exterior and interior systems of Aspire buildings and residences. Responsible for after-hours emergency work orders in Aspire buildings and residences. Assist in snow/ice removal (where applicable) Basic troubleshooting and routine preventative maintenance Recognize when specialized knowledge is necessary and source appropriate resources. Assist other departments with moving furniture including unloading and storing supplies. Attend all mandatory employee staff meetings and company safety meetings/webinars. Understand and follow all safety protocols. Reporting to this Position: None Requirements: Required Education & Experience: High School Diploma or GED, required Three (3) to five (5) years of related experience and/or training; or equivalent combination of education and experience Additional Licensing/Certifications: Valid driver's license and GOOD driving record (MVR is reviewed) Required Skills, Knowledge & Abilities: Technical training or extensive hands-on experience required Ability to carry out other tasks, perform physical labor, operate tools and machinery, and lift at least 80 lbs. Microsoft Office (Word, Excel, and Outlook) proficiency Preferred Skills, Knowledge & Abilities: Forklift Certification (HVAC) Certification preferred Appliance repair experience Compensation details: 28-28.85 Hourly Wage PIa82d7b5-
09/03/2025
Full time
Description: Position Summary: The Senior Maintenance Technician reports to the Facilities Manager and is responsible for performing routine building maintenance tasks and preventive maintenance in a timely and accurate manner. Performance of building maintenance tasks will include one or more fields (e.g., carpentry; electrical; heating, ventilation, and air conditioning (HVAC). Support the needs of the business and general work requirements as assigned. Follow all safety procedures and work in a fast-paced team environment. Position Responsibilities: Complete Facility Tree work orders including, but not limited to electrical, plumbing, HVAC, drywall, painting, and appliances. Electrical- perform routine electrical repairs such as: wiring, fuses, fixtures and sockets, and repair/install/service HVAC systems. Plumbing- perform routine plumbing repairs such as: replace/repair/service water heaters, clear drainlines, and replace broken pipes, worn out washers- gaskets and or faucets and floats. Carpentry- perform routine carpentry repair such as: kitchen cabinets, window screens/glass, door locks, and plaster/drywall, trim, flooring. Mechanical- perform routine mechanical repair such as: repair/diagnose all major appliances, HVAC, and other needed power tools. Other unskilled tasks such as: interior and exterior painting, floor tile installation and repair, interior cleaning, tree/shrub trimming, debris removal. Inventory- identifying, cataloging, and procuring necessary materials used in maintenance operation Perform preventative maintenance and general repairs of exterior and interior systems of Aspire buildings and residences. Responsible for after-hours emergency work orders in Aspire buildings and residences. Assist in snow/ice removal (where applicable) Basic troubleshooting and routine preventative maintenance Recognize when specialized knowledge is necessary and source appropriate resources. Assist other departments with moving furniture including unloading and storing supplies. Attend all mandatory employee staff meetings and company safety meetings/webinars. Understand and follow all safety protocols. Reporting to this Position: None Requirements: Required Education & Experience: High School Diploma or GED, required Three (3) to five (5) years of related experience and/or training; or equivalent combination of education and experience Additional Licensing/Certifications: Valid driver's license and GOOD driving record (MVR is reviewed) Required Skills, Knowledge & Abilities: Technical training or extensive hands-on experience required Ability to carry out other tasks, perform physical labor, operate tools and machinery, and lift at least 80 lbs. Microsoft Office (Word, Excel, and Outlook) proficiency Preferred Skills, Knowledge & Abilities: Forklift Certification (HVAC) Certification preferred Appliance repair experience Compensation details: 28-28.85 Hourly Wage PIa82d7b5-
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Body Shop Technician/Collision Repair US-PA-Skippack Job ID: Type: Regular Full-Time Category: Maintenance Austin Auto Body Overview Austin Autobody , a division of H&K Group, Inc., located in Skippack, PA, is looking for Body Shop Technicians to join our team on all shifts. The tech will focus on collision repair of the damaged bodies and body parts of automotive vehicles such as automobiles, buses, and light and heavy trucks. The ideal candidate is a detail-oriented problem solver with strong customer service and interpersonal skills. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Performs all work according to OSHA and H&K Safety policies Examines damaged vehicles and estimates cost of repairs. Removes upholstery, accessories, electrical and hydraulic window and seat operating equipment, and trim to gain access to vehicle body and fenders. Positions dolly block against surface of dented area and beats opposite surface to remove dents. Fills depressions with body filler. Removes damaged fenders, panels, and grills, and bolts or welds replacement parts in position. Straightens bent automobile frames with pneumatic frame straightening machine. Files, grinds, and sands repaired surfaces. Refinishes repaired surface. Aims headlights, aligns wheels, and bleeds hydraulic brake system. Paints surfaces after performing body repairs. Repairs or replaces defective mechanical parts. Other duties as assigned Qualifications Required Skills, Education, and Experience One-year certificate from a college or technical school or three months of related experience and/or training Equivalent combinations of experience and/or training may be considered Strong verbal and written communication skills Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience General Computer skills including internet usage, knowledge of database software, manufacturing software, and order processing systems OSHA or other relevant safety certifications Six months of related experience and/or training Experience with collision repair, sanding, painting, and/or detailing OSHA or other relevant safety training Experience in heavy civil construction, road construction, or other heavy industry Physical Demands Regularly reach with hands and arms, stoop, kneel, crouch, or crawl Frequently required to stand, walk, climb, or balance Regularly required to talk and hear Occasionally required to sit Occasionally lift and/or move up to 100 pounds Vision abilities required include close, distance, color, peripheral, depth perception, and ability to adjust focus Work Environment Frequently exposed to: Moving parts Fumes or airborne particles Toxic or caustic chemicals Wet and/or humid conditions Outside weather conditions, extreme cold and heat High, precarious places Noise level is usually loud Austin Autobody & Graphics was initially established in 1993 as an internal H&K Group support service dedicated to maintaining H&K's trademark "green wave" of on road tri-axle trucks and fleet vehicles. Since this time, Austin Auto Body & Graphics has grown to also support outside retail work specializing in a multitude of auto body services including direct repair, heavy equipment and truck repair, mobile sandblasting, custom/special interest repairs and finishing, as well as vinyl graphics. The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment physical 100% Company-Paid Health Benefits ! PI99524cfc9e2b-7006
09/02/2025
Full time
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Body Shop Technician/Collision Repair US-PA-Skippack Job ID: Type: Regular Full-Time Category: Maintenance Austin Auto Body Overview Austin Autobody , a division of H&K Group, Inc., located in Skippack, PA, is looking for Body Shop Technicians to join our team on all shifts. The tech will focus on collision repair of the damaged bodies and body parts of automotive vehicles such as automobiles, buses, and light and heavy trucks. The ideal candidate is a detail-oriented problem solver with strong customer service and interpersonal skills. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Performs all work according to OSHA and H&K Safety policies Examines damaged vehicles and estimates cost of repairs. Removes upholstery, accessories, electrical and hydraulic window and seat operating equipment, and trim to gain access to vehicle body and fenders. Positions dolly block against surface of dented area and beats opposite surface to remove dents. Fills depressions with body filler. Removes damaged fenders, panels, and grills, and bolts or welds replacement parts in position. Straightens bent automobile frames with pneumatic frame straightening machine. Files, grinds, and sands repaired surfaces. Refinishes repaired surface. Aims headlights, aligns wheels, and bleeds hydraulic brake system. Paints surfaces after performing body repairs. Repairs or replaces defective mechanical parts. Other duties as assigned Qualifications Required Skills, Education, and Experience One-year certificate from a college or technical school or three months of related experience and/or training Equivalent combinations of experience and/or training may be considered Strong verbal and written communication skills Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience General Computer skills including internet usage, knowledge of database software, manufacturing software, and order processing systems OSHA or other relevant safety certifications Six months of related experience and/or training Experience with collision repair, sanding, painting, and/or detailing OSHA or other relevant safety training Experience in heavy civil construction, road construction, or other heavy industry Physical Demands Regularly reach with hands and arms, stoop, kneel, crouch, or crawl Frequently required to stand, walk, climb, or balance Regularly required to talk and hear Occasionally required to sit Occasionally lift and/or move up to 100 pounds Vision abilities required include close, distance, color, peripheral, depth perception, and ability to adjust focus Work Environment Frequently exposed to: Moving parts Fumes or airborne particles Toxic or caustic chemicals Wet and/or humid conditions Outside weather conditions, extreme cold and heat High, precarious places Noise level is usually loud Austin Autobody & Graphics was initially established in 1993 as an internal H&K Group support service dedicated to maintaining H&K's trademark "green wave" of on road tri-axle trucks and fleet vehicles. Since this time, Austin Auto Body & Graphics has grown to also support outside retail work specializing in a multitude of auto body services including direct repair, heavy equipment and truck repair, mobile sandblasting, custom/special interest repairs and finishing, as well as vinyl graphics. The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment physical 100% Company-Paid Health Benefits ! PI99524cfc9e2b-7006
Technician, Field Svc V-nca US-FL-Boca Raton Job ID: 33220 Type: Full-Time # of Openings: 1 Category: Field Service CUSA Boca Raton About the Role Provides operational, maintenance and networking support for customers through extensive product and customer knowledge. Works closely with Service Managers, Product Support and other Technicians to provide high-level technical support with seamless technical expertise of Canon USA supported products in accordance with the current Service and Parts Standards working in a 24x7 environment. Act as the Manager in their absence and as product expert for the district or region. Your Impact - Diagnoses mechanical, software, network, and system failures, using established procedures for products on which certified and acts as a general technical expert in all situations providing a methodical expert level troubleshooting methodology. - Services and repairs designated equipment to Canon standards and specifications. Inspects the work of other Technicians to ensure compliance with Canon USA standards. - Reports to managers product failure trends and serviceability issues, with necessary supported documentation, ensuring accurate information and record keeping. Inspects and audits the work of other Technicians to ensure Canon USA standards are met. - Meets customer demands by providing efficient, responsive and accurate Field/Shop/on-site maintenance. - Properly maintains all technical information, FSRs, Expense Reports and Canon property assigned. Assists manager in auditing the team to ensure team compliance to Canon USA standards. - Communicates with supervisors and other departments, if necessary, regarding the solution of escalated technical and/or customer service-related problem areas. Develops solutions to these problems as required. - Possesses excellent customer communication and satisfaction skills. Can act in the absence of the manager with full responsibility and accountability. - Responsible for maintaining the performance of assigned machines within the district to ensure excellent overall performance for the team. - Assists the manager in maintaining the performance of other Technicians through mentoring, inspection and auditing. - Responsible for maintaining performance at a level which helps to achieve the districts overall metric targets. - Assists the manager in monitoring performance related to service KRA's, develops the technical or procedural corrections as required, and drives the implementation to augment the manager's span of control. About You: The Skills & Expertise You Bring - Bachelor's Degree in Electronics or equivalent training in Military/Trade School/Industry (CM). - 6 or more years of related experience. - Demonstrated technical proficiency within the imaging industry. - Demonstrated expert in the technical support of Canon products including toner and ink jet based black and white/color products. - Ability to phone assist less experienced technicians as a point of escalation as required. - May require some travel (valid driver's license and acceptable driving record necessary). - Ability to work in a 24x7 environment, perform shift work and do on-call rotations. - Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises. - Canon Technical Training Course Certifications for products related to the Canon USA product line with expertise across cutsheet, continuous, wide format and display graphics in both color and black only environments. - Canon ATSP Digital Technician Certification. - Successful competition of advanced networking certification. - Successful competition of Troubleshooting Class. - Expert color certification. - Must be able to lift 50 lbs. and be in a mobile activity more than 50% of the time (walking, standing, stooping/kneeling). We are providing the anticipated base salary range for this role: $33.59-50.30 Hourly. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . Posting Tags PI7e95c988ddae-9765
09/01/2025
Full time
Technician, Field Svc V-nca US-FL-Boca Raton Job ID: 33220 Type: Full-Time # of Openings: 1 Category: Field Service CUSA Boca Raton About the Role Provides operational, maintenance and networking support for customers through extensive product and customer knowledge. Works closely with Service Managers, Product Support and other Technicians to provide high-level technical support with seamless technical expertise of Canon USA supported products in accordance with the current Service and Parts Standards working in a 24x7 environment. Act as the Manager in their absence and as product expert for the district or region. Your Impact - Diagnoses mechanical, software, network, and system failures, using established procedures for products on which certified and acts as a general technical expert in all situations providing a methodical expert level troubleshooting methodology. - Services and repairs designated equipment to Canon standards and specifications. Inspects the work of other Technicians to ensure compliance with Canon USA standards. - Reports to managers product failure trends and serviceability issues, with necessary supported documentation, ensuring accurate information and record keeping. Inspects and audits the work of other Technicians to ensure Canon USA standards are met. - Meets customer demands by providing efficient, responsive and accurate Field/Shop/on-site maintenance. - Properly maintains all technical information, FSRs, Expense Reports and Canon property assigned. Assists manager in auditing the team to ensure team compliance to Canon USA standards. - Communicates with supervisors and other departments, if necessary, regarding the solution of escalated technical and/or customer service-related problem areas. Develops solutions to these problems as required. - Possesses excellent customer communication and satisfaction skills. Can act in the absence of the manager with full responsibility and accountability. - Responsible for maintaining the performance of assigned machines within the district to ensure excellent overall performance for the team. - Assists the manager in maintaining the performance of other Technicians through mentoring, inspection and auditing. - Responsible for maintaining performance at a level which helps to achieve the districts overall metric targets. - Assists the manager in monitoring performance related to service KRA's, develops the technical or procedural corrections as required, and drives the implementation to augment the manager's span of control. About You: The Skills & Expertise You Bring - Bachelor's Degree in Electronics or equivalent training in Military/Trade School/Industry (CM). - 6 or more years of related experience. - Demonstrated technical proficiency within the imaging industry. - Demonstrated expert in the technical support of Canon products including toner and ink jet based black and white/color products. - Ability to phone assist less experienced technicians as a point of escalation as required. - May require some travel (valid driver's license and acceptable driving record necessary). - Ability to work in a 24x7 environment, perform shift work and do on-call rotations. - Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises. - Canon Technical Training Course Certifications for products related to the Canon USA product line with expertise across cutsheet, continuous, wide format and display graphics in both color and black only environments. - Canon ATSP Digital Technician Certification. - Successful competition of advanced networking certification. - Successful competition of Troubleshooting Class. - Expert color certification. - Must be able to lift 50 lbs. and be in a mobile activity more than 50% of the time (walking, standing, stooping/kneeling). We are providing the anticipated base salary range for this role: $33.59-50.30 Hourly. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . Posting Tags PI7e95c988ddae-9765
Bowhead / UIC Technical Services
Dahlgren, Virginia
Overview HVAC Mechanic (FMSC-7) Bowhead seeks an HVAC Mechanic to join our team in Dahlgren, VA in support of our NSWC Dahlgren Facilities Maintenance Support contract. The HVAC Mechanic is responsible for general maintenance and repair of equipment and buildings. Responsibilities The HVAC Mechanic will require commercial HVAC experience in installation, operation, maintenance, overhaul and repair of air conditioning, refrigeration, and heating systems, to include Direct Digital Control (DDC) HVAC < 5 tons. They will keep the Supervisor apprised of unique situations and problems encountered. The HVAC Mechanic will work under close supervision, receiving technical guidance from the supervisor or higher-level technician. Work is checked frequently for accuracy. Job duties to include but not limited to: Installs, services and repairs environmental-control systems in buildings. Utilizes knowledge of refrigeration theory, pipefitting and structural layout. Mounts compressor and condenser units on platform or floor, uses hand tools; follows blueprints or engineering specifications. Fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment, and installs evaporator unit in chassis or in air-duct system, using hand tools. Also may cut and bend tubing to correct length and shape, using cutting and bending equipment and tools. May cut and thread pipes, using machine-threading or hand-threading equipment; joins tubing or pipes to various refrigerating units by means of sleeves, coupling or unions. Solders joints, using torch, forming complete circuit for refrigerant; installs expansion and discharge valves in circuit. Repair air conditioning systems to include Direct Digital Control (DDC) HVAC < 5 tons. Provide estimates on HVAC material cost and time to complete projects. Connects motors, compressors, temperature controls, humidity controls, and circulating ventilation fans to control panels and connects control panels to power source. Installs air and water filters in completed installation. Injects small amount of refrigerant into compressor to test system and adds Freon gas to build up prescribed operating pressure. Observes pressure and vacuum gauges and adjusts controls to insure proper operation, tests joints and connections for gas leaks, using gauges or soap-and-water solution, wraps pipes in insulation batting and secures them in place with cement or wire bands. Replaces defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units. May install, repair and service air conditioners, ranging from fifteen to twenty tons cooling capacity in warehouses. Qualifications High School Diploma or GED equivalent, with a minimum of three (3) years' experience in residential and commercial environments. Possession of a valid driver's license. Emergency Management/Hazardous Materials (HAZMAT) experience, preferred. Physical Demands: Must be able to lift up to 50 pounds Must be able to stand and walk for prolonged amounts of time Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIREMENTS: Must currently have or be able to obtain a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location.
09/01/2025
Full time
Overview HVAC Mechanic (FMSC-7) Bowhead seeks an HVAC Mechanic to join our team in Dahlgren, VA in support of our NSWC Dahlgren Facilities Maintenance Support contract. The HVAC Mechanic is responsible for general maintenance and repair of equipment and buildings. Responsibilities The HVAC Mechanic will require commercial HVAC experience in installation, operation, maintenance, overhaul and repair of air conditioning, refrigeration, and heating systems, to include Direct Digital Control (DDC) HVAC < 5 tons. They will keep the Supervisor apprised of unique situations and problems encountered. The HVAC Mechanic will work under close supervision, receiving technical guidance from the supervisor or higher-level technician. Work is checked frequently for accuracy. Job duties to include but not limited to: Installs, services and repairs environmental-control systems in buildings. Utilizes knowledge of refrigeration theory, pipefitting and structural layout. Mounts compressor and condenser units on platform or floor, uses hand tools; follows blueprints or engineering specifications. Fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment, and installs evaporator unit in chassis or in air-duct system, using hand tools. Also may cut and bend tubing to correct length and shape, using cutting and bending equipment and tools. May cut and thread pipes, using machine-threading or hand-threading equipment; joins tubing or pipes to various refrigerating units by means of sleeves, coupling or unions. Solders joints, using torch, forming complete circuit for refrigerant; installs expansion and discharge valves in circuit. Repair air conditioning systems to include Direct Digital Control (DDC) HVAC < 5 tons. Provide estimates on HVAC material cost and time to complete projects. Connects motors, compressors, temperature controls, humidity controls, and circulating ventilation fans to control panels and connects control panels to power source. Installs air and water filters in completed installation. Injects small amount of refrigerant into compressor to test system and adds Freon gas to build up prescribed operating pressure. Observes pressure and vacuum gauges and adjusts controls to insure proper operation, tests joints and connections for gas leaks, using gauges or soap-and-water solution, wraps pipes in insulation batting and secures them in place with cement or wire bands. Replaces defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units. May install, repair and service air conditioners, ranging from fifteen to twenty tons cooling capacity in warehouses. Qualifications High School Diploma or GED equivalent, with a minimum of three (3) years' experience in residential and commercial environments. Possession of a valid driver's license. Emergency Management/Hazardous Materials (HAZMAT) experience, preferred. Physical Demands: Must be able to lift up to 50 pounds Must be able to stand and walk for prolonged amounts of time Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIREMENTS: Must currently have or be able to obtain a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location.
Description: Now Hiring: Automotive Technician Location: 1441 S Guilford Rd, Suite 100, Carmel, IN 46032 Hours: Monday-Friday, 7:00 AM - 6:00 PM EST Compensation: $23-$35/hr (Hourly + Bonus) OR Flat Rate w/ Accelerators up to $8/hr + Bi-weekly Guarantee Average Annual Income: $54,600 - $89,440 Join the PFM Auto & Fleet Team! PFM Auto & Fleet is a full-service auto repair shop proudly serving Carmel and surrounding communities. We're looking for a skilled and motivated Automotive Technician ready to grow with a team that values quality, integrity, and continuous improvement. Expect a dynamic work environment with a wide variety of vehicles and challenging jobs-plus a supportive team that's got your back. What You'll Get: Full Benefits Package - Day 1! Medical, Dental, Vision Short & Long-Term Disability $25K Basic Life & AD&D - 100% Employer Paid 401K with Match (starting at 90 days) Time Off & Work-Life Balance 80 Hours of Front-Loaded PTO/Year 6 Paid Holidays 1 Week Paid Paternal Leave Weekends Off - We're Closed! Career Growth & Training Sponsored Onsite & Offsite Training Advancement Opportunities Backed by the GreatWater 360 Auto Care Network ? What We're Looking For: 3+ years of hands-on automotive repair experience Strong skills in: Steering, Suspension & Alignment Heating & Cooling Systems Some experience with: Electrical Diagnostics & Repairs Engine Diagnostics & Repairs Familiarity with Digital Vehicle Inspections Valid Driver's License & Personal Tools Positive attitude, strong work ethic, and team spirit Ready to Accelerate Your Career? Join a shop that values your skills, supports your growth, and treats you like family. Apply today and become part of the PFM Auto & Fleet team! Requirements: Compensation details: 0 Yearly Salary PI37c4b056ba57-9806
09/01/2025
Full time
Description: Now Hiring: Automotive Technician Location: 1441 S Guilford Rd, Suite 100, Carmel, IN 46032 Hours: Monday-Friday, 7:00 AM - 6:00 PM EST Compensation: $23-$35/hr (Hourly + Bonus) OR Flat Rate w/ Accelerators up to $8/hr + Bi-weekly Guarantee Average Annual Income: $54,600 - $89,440 Join the PFM Auto & Fleet Team! PFM Auto & Fleet is a full-service auto repair shop proudly serving Carmel and surrounding communities. We're looking for a skilled and motivated Automotive Technician ready to grow with a team that values quality, integrity, and continuous improvement. Expect a dynamic work environment with a wide variety of vehicles and challenging jobs-plus a supportive team that's got your back. What You'll Get: Full Benefits Package - Day 1! Medical, Dental, Vision Short & Long-Term Disability $25K Basic Life & AD&D - 100% Employer Paid 401K with Match (starting at 90 days) Time Off & Work-Life Balance 80 Hours of Front-Loaded PTO/Year 6 Paid Holidays 1 Week Paid Paternal Leave Weekends Off - We're Closed! Career Growth & Training Sponsored Onsite & Offsite Training Advancement Opportunities Backed by the GreatWater 360 Auto Care Network ? What We're Looking For: 3+ years of hands-on automotive repair experience Strong skills in: Steering, Suspension & Alignment Heating & Cooling Systems Some experience with: Electrical Diagnostics & Repairs Engine Diagnostics & Repairs Familiarity with Digital Vehicle Inspections Valid Driver's License & Personal Tools Positive attitude, strong work ethic, and team spirit Ready to Accelerate Your Career? Join a shop that values your skills, supports your growth, and treats you like family. Apply today and become part of the PFM Auto & Fleet team! Requirements: Compensation details: 0 Yearly Salary PI37c4b056ba57-9806
Overview Your Future at M.C. Dean We're seeking people driven to excellence and inspired to have a meaningful impact powering, automating, integrating, and securing the world's most critical infrastructure and facilities. This translates into fulfilling opportunities for employees driven to excel in a meaningful career. As an employee at M.C. Dean, you will join forces with more than 5,800 professionals who engineer and deploy automated, secure and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Together, we transform the way complex, large-scale systems are designed, delivered, and sustained-enhancing client outcomes, improving lives, and changing the world for the better. We are seeking an Electronics Technician 4 to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities In this role you will be responsible for installing and maintaining electronic security systems. Performing preventive maintenance requirements. Performing inspections, evaluations, and inventory Leading teams on Large complex installation projects with limited supervision. Leading and documenting daily toolbox talks, ORMs and Safety Audits. Installing and Maintain equipment at both the local and global level per design packages. Programming and Installation of head end equipment for Access Control, Intrusion Detection and CCTV systems. Troubleshooting and isolating both systems and/or hardware at both a local and global level. Lead the on-site software commissioning and testing. Lead inspections, evaluations, and inventory Performing Take off project drawings Create, Document and Track RFIs. Design assist and feedback Documenting daily reports and project progress. Communicating project and team member issues/concerns to management Create and manage Project schedule Integration of IDS, ACS and CCTV systems Forecast and Manage Project Labor Hours Communicate effectively with Supervisors and Subordinates Guide and Mentor Technicians Qualifications Clearance/Citizen Type: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ACTIVE TS/SCI w/ POLY is REQUIRED Key Requirements: Requires a Valid driver's license. This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy Education: HS diploma or GED Military Electronics Training (minimum 720 classroom hours) or Graduation from an accredited Electronics Technician program or Graduation from an Electrical Apprenticeship program An additional three (3) years of electronics installation and/or maintenance activities Required Progressive Experience: 8+ years of electronics installation and/or maintenance activities on multiple systems and with multiple customer programs 3 years of the above experience must be focused in electronic security systems Strong Oral, Written and Presentation Skills. Demonstrated background working with multidisciplinary teams. Demonstrated time management and organization skills to meet deadlines and quality objectives. Strong MS Excel, Word and PowerPoint Skills is a plus. Must be able to travel 50%. Desired / Advantageous Qualifications: Vendor certifications in multiple IDS, ACS, and CCTV systems CCURE, Lenel, Identiv/Hirsch Velocity, Bosch Radionics, Bosch CCTV, Bosch BVMS, AIphone Intercom Systems Airphone, FFT, DIVAR, Windows operating systems & certifications and experience in installation of said systems. What we offer: A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for 75 years. Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. Open and transparent communication with senior leadership as well as local office management. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences. Pay Range USD $36.00 - USD $60.00 /Yr.
09/01/2025
Full time
Overview Your Future at M.C. Dean We're seeking people driven to excellence and inspired to have a meaningful impact powering, automating, integrating, and securing the world's most critical infrastructure and facilities. This translates into fulfilling opportunities for employees driven to excel in a meaningful career. As an employee at M.C. Dean, you will join forces with more than 5,800 professionals who engineer and deploy automated, secure and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Together, we transform the way complex, large-scale systems are designed, delivered, and sustained-enhancing client outcomes, improving lives, and changing the world for the better. We are seeking an Electronics Technician 4 to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities In this role you will be responsible for installing and maintaining electronic security systems. Performing preventive maintenance requirements. Performing inspections, evaluations, and inventory Leading teams on Large complex installation projects with limited supervision. Leading and documenting daily toolbox talks, ORMs and Safety Audits. Installing and Maintain equipment at both the local and global level per design packages. Programming and Installation of head end equipment for Access Control, Intrusion Detection and CCTV systems. Troubleshooting and isolating both systems and/or hardware at both a local and global level. Lead the on-site software commissioning and testing. Lead inspections, evaluations, and inventory Performing Take off project drawings Create, Document and Track RFIs. Design assist and feedback Documenting daily reports and project progress. Communicating project and team member issues/concerns to management Create and manage Project schedule Integration of IDS, ACS and CCTV systems Forecast and Manage Project Labor Hours Communicate effectively with Supervisors and Subordinates Guide and Mentor Technicians Qualifications Clearance/Citizen Type: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ACTIVE TS/SCI w/ POLY is REQUIRED Key Requirements: Requires a Valid driver's license. This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy Education: HS diploma or GED Military Electronics Training (minimum 720 classroom hours) or Graduation from an accredited Electronics Technician program or Graduation from an Electrical Apprenticeship program An additional three (3) years of electronics installation and/or maintenance activities Required Progressive Experience: 8+ years of electronics installation and/or maintenance activities on multiple systems and with multiple customer programs 3 years of the above experience must be focused in electronic security systems Strong Oral, Written and Presentation Skills. Demonstrated background working with multidisciplinary teams. Demonstrated time management and organization skills to meet deadlines and quality objectives. Strong MS Excel, Word and PowerPoint Skills is a plus. Must be able to travel 50%. Desired / Advantageous Qualifications: Vendor certifications in multiple IDS, ACS, and CCTV systems CCURE, Lenel, Identiv/Hirsch Velocity, Bosch Radionics, Bosch CCTV, Bosch BVMS, AIphone Intercom Systems Airphone, FFT, DIVAR, Windows operating systems & certifications and experience in installation of said systems. What we offer: A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for 75 years. Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. Open and transparent communication with senior leadership as well as local office management. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences. Pay Range USD $36.00 - USD $60.00 /Yr.
Overview About M.C. Dean M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. We are seeking an Electronics Technician 4 to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities In this role you will be responsible for installing and maintaining electronic security systems. Performing preventive maintenance requirements. Performing inspections, evaluations, and inventory Leading teams on Large complex installation projects with limited supervision. Leading and documenting daily toolbox talks, ORMs and Safety Audits. Installing and Maintain equipment at both the local and global level per design packages. Programming and Installation of head end equipment for Access Control, Intrusion Detection and CCTV systems. Troubleshooting and isolating both systems and/or hardware at both a local and global level. Lead the on-site software commissioning and testing. Lead inspections, evaluations, and inventory Performing Take off project drawings Create, Document and Track RFIs. Design assist and feedback Documenting daily reports and project progress. Communicating project and team member issues/concerns to management Create and manage Project schedule Integration of IDS, ACS and CCTV systems Forecast and Manage Project Labor Hours Communicate effectively with Supervisors and Subordinates Guide and Mentor Technicians Qualifications Clearance/Citizen Type: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ACTIVE SECRET Clearance is REQUIRED Key Requirements: Requires a Valid driver's license. This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy Education: HS diploma or GED Military Electronics Training (minimum 720 classroom hours) or Graduation from an accredited Electronics Technician program or Graduation from an Electrical Apprenticeship program An additional three (3) years of electronics installation and/or maintenance activities Required Progressive Experience: 8+ years of electronics installation and/or maintenance activities on multiple systems and with multiple customer programs 3 years of the above experience must be focused in electronic security systems Strong Oral, Written and Presentation Skills. Demonstrated background working with multidisciplinary teams. Demonstrated time management and organization skills to meet deadlines and quality objectives. Strong MS Excel, Word and PowerPoint Skills is a plus. Must be able to travel 50%. Desired / Advantageous Qualifications: Vendor certifications in multiple IDS, ACS, and CCTV systems CCURE, Lenel, Identiv/Hirsch Velocity, Bosch Radionics, Bosch CCTV, Bosch BVMS, AIphone Intercom Systems Airphone, FFT, DIVAR, Windows operating systems & certifications and experience in installation of said systems. What we offer: A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for 75 years. Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. Open and transparent communication with senior leadership as well as local office management. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.
09/01/2025
Full time
Overview About M.C. Dean M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. We are seeking an Electronics Technician 4 to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities In this role you will be responsible for installing and maintaining electronic security systems. Performing preventive maintenance requirements. Performing inspections, evaluations, and inventory Leading teams on Large complex installation projects with limited supervision. Leading and documenting daily toolbox talks, ORMs and Safety Audits. Installing and Maintain equipment at both the local and global level per design packages. Programming and Installation of head end equipment for Access Control, Intrusion Detection and CCTV systems. Troubleshooting and isolating both systems and/or hardware at both a local and global level. Lead the on-site software commissioning and testing. Lead inspections, evaluations, and inventory Performing Take off project drawings Create, Document and Track RFIs. Design assist and feedback Documenting daily reports and project progress. Communicating project and team member issues/concerns to management Create and manage Project schedule Integration of IDS, ACS and CCTV systems Forecast and Manage Project Labor Hours Communicate effectively with Supervisors and Subordinates Guide and Mentor Technicians Qualifications Clearance/Citizen Type: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ACTIVE SECRET Clearance is REQUIRED Key Requirements: Requires a Valid driver's license. This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy Education: HS diploma or GED Military Electronics Training (minimum 720 classroom hours) or Graduation from an accredited Electronics Technician program or Graduation from an Electrical Apprenticeship program An additional three (3) years of electronics installation and/or maintenance activities Required Progressive Experience: 8+ years of electronics installation and/or maintenance activities on multiple systems and with multiple customer programs 3 years of the above experience must be focused in electronic security systems Strong Oral, Written and Presentation Skills. Demonstrated background working with multidisciplinary teams. Demonstrated time management and organization skills to meet deadlines and quality objectives. Strong MS Excel, Word and PowerPoint Skills is a plus. Must be able to travel 50%. Desired / Advantageous Qualifications: Vendor certifications in multiple IDS, ACS, and CCTV systems CCURE, Lenel, Identiv/Hirsch Velocity, Bosch Radionics, Bosch CCTV, Bosch BVMS, AIphone Intercom Systems Airphone, FFT, DIVAR, Windows operating systems & certifications and experience in installation of said systems. What we offer: A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for 75 years. Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. Open and transparent communication with senior leadership as well as local office management. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.
Overview M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission critical facilities, secure environments, complex infrastructure, and global enterprises. The company's capabilities include electrical, electronic security, telecommunications, life safety, automation and controls, audio visual, and IT systems. M.C. Dean is headquartered in Tysons, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Why join M.C. Dean? Our people are inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. The Critical Power Group is responsible for maintaining, servicing, and troubleshooting UPS systems, batteries, and other critical infrastructure equipment. Our technicians are factory trained on most major UPS manufacturers of static equipment (e.g., Ametek, SCI, Cyberex, Toshiba, Mitsubishi, Gutor, APC, MGE, Schneider Electric, Powerware/Eaton to name a few). Our technicians perform preventive maintenance and equipment testing as well as emergency service calls at high profile government, institutional and commercial customer facilities. The Critical Power Group also provides engineering and technical support to customers and other divisions of M.C. Dean, Inc. Responsibilities Daily travel with independent work structure Emergency call availability 24/7 unless on PTO or Off Call. Maintain/safeguard company issued equipment, tools, and instruments Battery Repair & Replacement; installations and replacements. Perform required preventative maintenance service to equipment under contract as scheduled. Customer contact and interface. Communicate availability status to corporate office. Communicate availability status to Team Lead or manager Protect company proprietary information, manuals, and records Use of electronic and electrical test equipment as necessary Coordinate and manage all on-site subcontractors hired by M.C. Dean as necessary Maintain company or personal vehicle in safe and operational condition; maintain insurance as required by company. Ensure that work is performed to M.C. Dean Standards Complete all paperwork, including Field Service Reports, Time Sheets, and Expense Reports, and other job required reports timely and accurately Provide technical support to customers upon request. Maintain Technical documentation for study and/or review. Willing and able to attend product specific training as company deems necessary. Cross train other (UPS technicians) as needed. Other duties as required. Inspects power electronic systems and their associated controls. Typical systems include but are not limited to UPS systems, battery systems associated with power backup systems, Static Transfer Switches, Power Distribution Units, and their associated controls. Inspections include, but are not limited to Initial, In-process, Visual Condition, and Final Inspections, Maintenance Operational Checks, and Failure Analysis, and repairs. Certifies by signature to the customer that systems and components adhere to quality standards established by applicable codes, publications, checklists and specifications. Reviews and checks system drawings and specifications for accuracy and completeness. Technician will determine maintenance requirements, inspection requirements, and compliance with technical resolved discrepancies between recorded and actual system components by research with owner/manufacturer or by physical inspection. Corrects and certifies changes entered for record. Provides technical assistance and expertise on power electronic devices to owners and engineers. Technician must perform inspections, technical assistance, maintenance assistance, and instruction of site personnel, advises site personnel on proper maintenance practices, procedures, and techniques. Reviews and interprets existing technical publications applicable to inspection, modification, and maintenance of power electronics. Resolves technical problems encountered. Prepares reports of findings and makes recommendations on system improvements and implementing quality control programs. The physical demands are represented of those that must be met by an employee to successfully perform the essential functions of the job, including lifting and installing batteries. Company expects the employee to observe all safety standards. Maintains operational expertise with the following instruments: Digital Multi-meter Power Analyzer Infrared Camera Digital Camera Insulation Test Equipment EMI/EMF Meters Battery Test Equipment (Alber/Midtronics) Oscilloscope Requires 7X24X365 availability when on call. Job Position may require overnight travel at company expense Performs other duties as assigned. Supervisory Controls: Work is performed under general supervision of the Regional Mangers and Team Leads. Technician receives assignments in terms of schedules, priorities, and general instructions pertaining to special problem areas. Is afforded freedom of action within the framework of established policies, procedures, and production schedules, accomplishing assignments on own initiative. Completed work is subject to review for adherence to policy, soundness of recommendations, and overall accomplishment of organizational tasks and functions. The primary purpose of this position is to provide inspection and certification of power electronics and their key components. The end goal is to obtain reliability, availability & quality of power while improving or sustaining the maintainability of the electrical system. Qualifications AA/BS degree in Electrical and/or Electronics from an accredited college or university, or equivalent field or military training. Minimum of 5+ years OEM experience (Vertiv, SCI, Cyberex, Toshiba, Mitsubishi, Gutor, APC, MGE, Schneider Electric, Powerware/Eaton) or eight years of progressively difficult experience in power electronic system maintenance and repair. Candidate Expectations: Proficiency in reading and interpreting complex technical instructions, plans blueprints, and schematic diagrams. Strong working knowledge of NEC, maintenance practices, maintenance and supply procedures, and quality control procedures. Demonstrated ability to evaluate complex electrical systems, perform damage assessments, estimate maintenance, parts, and manpower requirements, diagnose malfunctions, and employ testing and inspection techniques. Use of laptop computer, various software packages and other electronic communication devices will be required. Requires strong written and oral communication skills. Future training and certification requirements: Various Manufacturer Maintenance Courses, Power Quality Training Course/Certification. Technician preferred to be proficient in Microsoft Office products. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: Lifts at least 100 pounds at one time and 60 pounds for an extended period. Relocates a 12-foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls, and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences. Pay Range USD $34.78 - USD $50.66 /Hr.
08/31/2025
Full time
Overview M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission critical facilities, secure environments, complex infrastructure, and global enterprises. The company's capabilities include electrical, electronic security, telecommunications, life safety, automation and controls, audio visual, and IT systems. M.C. Dean is headquartered in Tysons, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Why join M.C. Dean? Our people are inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. The Critical Power Group is responsible for maintaining, servicing, and troubleshooting UPS systems, batteries, and other critical infrastructure equipment. Our technicians are factory trained on most major UPS manufacturers of static equipment (e.g., Ametek, SCI, Cyberex, Toshiba, Mitsubishi, Gutor, APC, MGE, Schneider Electric, Powerware/Eaton to name a few). Our technicians perform preventive maintenance and equipment testing as well as emergency service calls at high profile government, institutional and commercial customer facilities. The Critical Power Group also provides engineering and technical support to customers and other divisions of M.C. Dean, Inc. Responsibilities Daily travel with independent work structure Emergency call availability 24/7 unless on PTO or Off Call. Maintain/safeguard company issued equipment, tools, and instruments Battery Repair & Replacement; installations and replacements. Perform required preventative maintenance service to equipment under contract as scheduled. Customer contact and interface. Communicate availability status to corporate office. Communicate availability status to Team Lead or manager Protect company proprietary information, manuals, and records Use of electronic and electrical test equipment as necessary Coordinate and manage all on-site subcontractors hired by M.C. Dean as necessary Maintain company or personal vehicle in safe and operational condition; maintain insurance as required by company. Ensure that work is performed to M.C. Dean Standards Complete all paperwork, including Field Service Reports, Time Sheets, and Expense Reports, and other job required reports timely and accurately Provide technical support to customers upon request. Maintain Technical documentation for study and/or review. Willing and able to attend product specific training as company deems necessary. Cross train other (UPS technicians) as needed. Other duties as required. Inspects power electronic systems and their associated controls. Typical systems include but are not limited to UPS systems, battery systems associated with power backup systems, Static Transfer Switches, Power Distribution Units, and their associated controls. Inspections include, but are not limited to Initial, In-process, Visual Condition, and Final Inspections, Maintenance Operational Checks, and Failure Analysis, and repairs. Certifies by signature to the customer that systems and components adhere to quality standards established by applicable codes, publications, checklists and specifications. Reviews and checks system drawings and specifications for accuracy and completeness. Technician will determine maintenance requirements, inspection requirements, and compliance with technical resolved discrepancies between recorded and actual system components by research with owner/manufacturer or by physical inspection. Corrects and certifies changes entered for record. Provides technical assistance and expertise on power electronic devices to owners and engineers. Technician must perform inspections, technical assistance, maintenance assistance, and instruction of site personnel, advises site personnel on proper maintenance practices, procedures, and techniques. Reviews and interprets existing technical publications applicable to inspection, modification, and maintenance of power electronics. Resolves technical problems encountered. Prepares reports of findings and makes recommendations on system improvements and implementing quality control programs. The physical demands are represented of those that must be met by an employee to successfully perform the essential functions of the job, including lifting and installing batteries. Company expects the employee to observe all safety standards. Maintains operational expertise with the following instruments: Digital Multi-meter Power Analyzer Infrared Camera Digital Camera Insulation Test Equipment EMI/EMF Meters Battery Test Equipment (Alber/Midtronics) Oscilloscope Requires 7X24X365 availability when on call. Job Position may require overnight travel at company expense Performs other duties as assigned. Supervisory Controls: Work is performed under general supervision of the Regional Mangers and Team Leads. Technician receives assignments in terms of schedules, priorities, and general instructions pertaining to special problem areas. Is afforded freedom of action within the framework of established policies, procedures, and production schedules, accomplishing assignments on own initiative. Completed work is subject to review for adherence to policy, soundness of recommendations, and overall accomplishment of organizational tasks and functions. The primary purpose of this position is to provide inspection and certification of power electronics and their key components. The end goal is to obtain reliability, availability & quality of power while improving or sustaining the maintainability of the electrical system. Qualifications AA/BS degree in Electrical and/or Electronics from an accredited college or university, or equivalent field or military training. Minimum of 5+ years OEM experience (Vertiv, SCI, Cyberex, Toshiba, Mitsubishi, Gutor, APC, MGE, Schneider Electric, Powerware/Eaton) or eight years of progressively difficult experience in power electronic system maintenance and repair. Candidate Expectations: Proficiency in reading and interpreting complex technical instructions, plans blueprints, and schematic diagrams. Strong working knowledge of NEC, maintenance practices, maintenance and supply procedures, and quality control procedures. Demonstrated ability to evaluate complex electrical systems, perform damage assessments, estimate maintenance, parts, and manpower requirements, diagnose malfunctions, and employ testing and inspection techniques. Use of laptop computer, various software packages and other electronic communication devices will be required. Requires strong written and oral communication skills. Future training and certification requirements: Various Manufacturer Maintenance Courses, Power Quality Training Course/Certification. Technician preferred to be proficient in Microsoft Office products. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: Lifts at least 100 pounds at one time and 60 pounds for an extended period. Relocates a 12-foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls, and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences. Pay Range USD $34.78 - USD $50.66 /Hr.
Overview Your Future at M.C. Dean We're seeking people driven to excellence and inspired to have a meaningful impact powering, automating, integrating, and securing the world's most critical infrastructure and facilities. This translates into fulfilling opportunities for employees driven to excel in a meaningful career. As an employee at M.C. Dean, you will join forces with more than 5,800 professionals who engineer and deploy automated, secure and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Together, we transform the way complex, large-scale systems are designed, delivered, and sustained-enhancing client outcomes, improving lives, and changing the world for the better. We are seeking an Electronics Technician 1 to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities Executes various technical tasks and responsibilities within field operations. Performs on-site installations, maintenance, troubleshooting, and repairs of equipment and systems. Ensures the functionality and reliability of various technologies. Key duties include conducting site surveys, configuring hardware and software, testing systems for proper operation, and providing technical support to customers. Field Technicians must possess strong problem-solving skills, technical proficiency, and the ability to communicate effectively with clients and team members. Utilizes and comprehends project Safety plan (JHA, AHA, PFW), enforcing adherence to M.C. Dean handbook and policies. Analyzes and interprets complete M.C. Dean drawing packages to assess constructability, ensuring accuracy and completeness. Tracks and inventories tools, conducting consistent tool inspections and performing tool inventory at the end of each day for assigned tools and equipment. Takes responsibility for all cleanup related to their scope of work and performs regular tool inspections to maintain safety and functionality. Participates in daily ORM (safety) and project meetings, ensuring team compliance with safety requirements. Participates in PITCO plan creation and build out, executing PITCO plan to include testing to verify high quality. Installs system raceway, cabling, equipment racks, enclosures, panels, and all mounting hardware components, ensuring proper grounding and adherence to NEC standards. Terminates, tests, and configures electronic devices, network and IT equipment. Racks and stacks head end equipment, terminates and performs cable terminations and accessories associated with industry standards. Communicates consistently with MC Dean Project Teams, exhibiting dedication, punctuality, and preparedness for work. Acts as a collaborative teammate, providing and absorbing constructive feedback with both internal and external customers in a positive manner. Plans and prioritizes tasks effectively, understanding and embodying the M.C. Dean vision, mission, and values. Responsible for maintaining M.C. Dean quality standards for all installation and testing tasks Mentor and train junior team members in installation techniques, codes, standards, and industry best practices. Utilize Infralink and other tools to document daily work tasks in order to track progress on job sites. • This is not intended to be an all-inclusive list of job duties and responsibilities. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Qualifications Clearance/Citizen Type: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ACTIVE SECRET Clearance is REQUIRED Education: HS diploma or GED Military Electronics Training (minimum 720 classroom hours) is required Required Progressive Experience: 2+ years of electronics installation and/or maintenance activities on multiple systems and with multiple customer programs Requires a Valid driver's license This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy Strong Oral, Written and Presentation Skills. Preferred Qualifications: Vendor certifications in multiple IDS, ACS, and CCTV systems Identiv/Hirsch Velocity, Bosch Radionics, Bosch CCTV, Bosch BVMS, AIphone Intercom Systems Airphone, FFT, DIVAR, Windows operating systems & certifications and experience in installation of said systems. Graduation from an Electrical Apprenticeship program An additional three (3) years of electronics installation and/or maintenance activities Strong MS Excel, Word and PowerPoint Skills is a plus. Demonstrated time management and organization skills to meet deadlines and quality objectives. Ability to work with a team What we offer: A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for 75 years. Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. Open and transparent communication with senior leadership as well as local office management. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.
08/31/2025
Full time
Overview Your Future at M.C. Dean We're seeking people driven to excellence and inspired to have a meaningful impact powering, automating, integrating, and securing the world's most critical infrastructure and facilities. This translates into fulfilling opportunities for employees driven to excel in a meaningful career. As an employee at M.C. Dean, you will join forces with more than 5,800 professionals who engineer and deploy automated, secure and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Together, we transform the way complex, large-scale systems are designed, delivered, and sustained-enhancing client outcomes, improving lives, and changing the world for the better. We are seeking an Electronics Technician 1 to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities Executes various technical tasks and responsibilities within field operations. Performs on-site installations, maintenance, troubleshooting, and repairs of equipment and systems. Ensures the functionality and reliability of various technologies. Key duties include conducting site surveys, configuring hardware and software, testing systems for proper operation, and providing technical support to customers. Field Technicians must possess strong problem-solving skills, technical proficiency, and the ability to communicate effectively with clients and team members. Utilizes and comprehends project Safety plan (JHA, AHA, PFW), enforcing adherence to M.C. Dean handbook and policies. Analyzes and interprets complete M.C. Dean drawing packages to assess constructability, ensuring accuracy and completeness. Tracks and inventories tools, conducting consistent tool inspections and performing tool inventory at the end of each day for assigned tools and equipment. Takes responsibility for all cleanup related to their scope of work and performs regular tool inspections to maintain safety and functionality. Participates in daily ORM (safety) and project meetings, ensuring team compliance with safety requirements. Participates in PITCO plan creation and build out, executing PITCO plan to include testing to verify high quality. Installs system raceway, cabling, equipment racks, enclosures, panels, and all mounting hardware components, ensuring proper grounding and adherence to NEC standards. Terminates, tests, and configures electronic devices, network and IT equipment. Racks and stacks head end equipment, terminates and performs cable terminations and accessories associated with industry standards. Communicates consistently with MC Dean Project Teams, exhibiting dedication, punctuality, and preparedness for work. Acts as a collaborative teammate, providing and absorbing constructive feedback with both internal and external customers in a positive manner. Plans and prioritizes tasks effectively, understanding and embodying the M.C. Dean vision, mission, and values. Responsible for maintaining M.C. Dean quality standards for all installation and testing tasks Mentor and train junior team members in installation techniques, codes, standards, and industry best practices. Utilize Infralink and other tools to document daily work tasks in order to track progress on job sites. • This is not intended to be an all-inclusive list of job duties and responsibilities. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Qualifications Clearance/Citizen Type: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ACTIVE SECRET Clearance is REQUIRED Education: HS diploma or GED Military Electronics Training (minimum 720 classroom hours) is required Required Progressive Experience: 2+ years of electronics installation and/or maintenance activities on multiple systems and with multiple customer programs Requires a Valid driver's license This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy Strong Oral, Written and Presentation Skills. Preferred Qualifications: Vendor certifications in multiple IDS, ACS, and CCTV systems Identiv/Hirsch Velocity, Bosch Radionics, Bosch CCTV, Bosch BVMS, AIphone Intercom Systems Airphone, FFT, DIVAR, Windows operating systems & certifications and experience in installation of said systems. Graduation from an Electrical Apprenticeship program An additional three (3) years of electronics installation and/or maintenance activities Strong MS Excel, Word and PowerPoint Skills is a plus. Demonstrated time management and organization skills to meet deadlines and quality objectives. Ability to work with a team What we offer: A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for 75 years. Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. Open and transparent communication with senior leadership as well as local office management. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.
Overview M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission critical facilities, secure environments, complex infrastructure, and global enterprises. The company's capabilities include electrical, electronic security, telecommunications, life safety, automation and controls, audio visual, and IT systems. M.C. Dean is headquartered in Tyson's, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Why join M.C. Dean? Our people are inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. Clearance Requirement: Applicants selected will be subject to a government security investigation and must meet eligibility requirements, to include U.S. Citizenship; Applicant selected must have the ability to obtain and maintain a Secret Clearance License / Certification Requirement: Journeyman or Master License in Electrical or Mechanical Mechanical applicants must possess an EPA Certification VMET (Verification of Military Experience and Training) is accepted if it reflects relevant electrical or mechanical experience and is approved by customer Responsibilities Responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center is operating at peak efficiency. This involves both planned preventative maintenance of equipment, daily corrective work, and emergency response to emergent issues. The technician serves as an expert technical resource reporting to a program manager, interacting with Onsite Engineering Operations (OEO) and any third-party vendors. They are expected to be a singular focal point for all facility operations within a given data center and to support operated data centers. Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime. Meet all requirements of CET1. Utilize safe working practices; apply lockout/tagout, SDS, apply good housekeeping methods, etc. Utilize common administrative and office software. Read and interpret wiring diagrams, blueprints, floor plans, construction documents, mechanical riser drawings, OEM operating and maintenance instructions, job specifications, and MOP/SOP's. Use hand tools and test equipment to install, troubleshoot, and repair new or replacement parts for existing mechanical and electrical equipment covered under CET2 classified procedures, according to specifications and established safety guidelines, relying on MOP's, manufacturer's literature, and industry best practices to perform tasks under supervision, and ensures activities are logged in CMMS. Assist a CET3/4 technician with CET3 classified procedures (MOP/SOP) associated with the site/campus they are based on, and transfer knowledge and train other technicians. Conduct daily walk-through of facility documenting parameters such as power availability, temperature and humidity, alarm status, etc. to be catalogued and compared for identification of discrepancies and trends. Be conversant in site-specific processes and procedures such as procedure creation and review standards, procedure instructions and templates, how to report an incident or outage, procedure execution, PM standards, CMMS standards and policy, work order and notification, as well as the use of SharePoint to access CE procedures and training content. Understand how to action all site primary and secondary EOP's, focusing on mastering the first responder role during an emergency. Fully conversant on how to complete drills associated with the site primary and secondary EOP's. Understand the function, purpose, nominal operating parameters, and how to operate/isolate and start up: MV/LV Distribution Boards, MV/LV Breakers, UPS, Generator, Batteries, STS, ATS, AHU, DX units, Chillers, Evap Washer Systems, CRAC Units, Fuel Systems, ASCO Systems, BMS System, EPMS System, and Fire Alarm System. Be conversant of the BMS and EPMS systems and the impact of any state change, capable of navigating the system, interpreting alarms, and able to perform controlled shutdowns/start-ups/equipment rotations. If applicable to the role, disable and enable fire alarm control panels and systems. Maintain maintenance records as required by City, State, and EPA regulations. Interpret building codes and local and federal regulations as they relate to installations and apply them as required by the site. Identify required materials and parts for maintenance and repair to facilitate procurement. Understand the heating cycle to include identify components in the heating system, understand how each component works, diagnose problems in the heating system using a gas pressure test and other devices for routine maintenance and to troubleshoot and repair. Understand the refrigeration cycles to include identifying components in advanced refrigeration circuits, understanding how each component works, diagnosing and correcting problems in the refrigeration circuit, using manifold gauge set, pressure/temperature chart and temperature measuring devices for routine maintenance and to troubleshoot. Knowledge of power density and parity with HVAC system capacities, and cooling and heat load/loss calculations. Qualifications High School Diploma or equivalent with minimum 6+ years of experience with electrical, mechanical, and fire/life safety equipment. Applicants must have a 3+ years of experience in a data center environment Applicants selected will be subject to a government security investigation and must meet eligibility requirements, to include U.S. Citizenship; Applicants selected must have an Active Secret Clearance or be able to obtain before assignment. Applicants identified as Mechanical shall have experience with centrifugal chillers greater than 300 tons, boilers, or significant other mechanical experiences Mechanical applicants must possess an EPA Certification Electrical applicants must hold a current Journeyman License Applicants identified as Electrical shall have experience with switchgear, generators, UPS or significant other electrical experiences D esired / Advantageous Qualifications: Possess a Journeyman Electrician License, Journeyman HVAC license or equivalent. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12-foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.
08/31/2025
Full time
Overview M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most recognizable mission critical facilities, secure environments, complex infrastructure, and global enterprises. The company's capabilities include electrical, electronic security, telecommunications, life safety, automation and controls, audio visual, and IT systems. M.C. Dean is headquartered in Tyson's, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability. Why join M.C. Dean? Our people are inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. Clearance Requirement: Applicants selected will be subject to a government security investigation and must meet eligibility requirements, to include U.S. Citizenship; Applicant selected must have the ability to obtain and maintain a Secret Clearance License / Certification Requirement: Journeyman or Master License in Electrical or Mechanical Mechanical applicants must possess an EPA Certification VMET (Verification of Military Experience and Training) is accepted if it reflects relevant electrical or mechanical experience and is approved by customer Responsibilities Responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center is operating at peak efficiency. This involves both planned preventative maintenance of equipment, daily corrective work, and emergency response to emergent issues. The technician serves as an expert technical resource reporting to a program manager, interacting with Onsite Engineering Operations (OEO) and any third-party vendors. They are expected to be a singular focal point for all facility operations within a given data center and to support operated data centers. Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime. Meet all requirements of CET1. Utilize safe working practices; apply lockout/tagout, SDS, apply good housekeeping methods, etc. Utilize common administrative and office software. Read and interpret wiring diagrams, blueprints, floor plans, construction documents, mechanical riser drawings, OEM operating and maintenance instructions, job specifications, and MOP/SOP's. Use hand tools and test equipment to install, troubleshoot, and repair new or replacement parts for existing mechanical and electrical equipment covered under CET2 classified procedures, according to specifications and established safety guidelines, relying on MOP's, manufacturer's literature, and industry best practices to perform tasks under supervision, and ensures activities are logged in CMMS. Assist a CET3/4 technician with CET3 classified procedures (MOP/SOP) associated with the site/campus they are based on, and transfer knowledge and train other technicians. Conduct daily walk-through of facility documenting parameters such as power availability, temperature and humidity, alarm status, etc. to be catalogued and compared for identification of discrepancies and trends. Be conversant in site-specific processes and procedures such as procedure creation and review standards, procedure instructions and templates, how to report an incident or outage, procedure execution, PM standards, CMMS standards and policy, work order and notification, as well as the use of SharePoint to access CE procedures and training content. Understand how to action all site primary and secondary EOP's, focusing on mastering the first responder role during an emergency. Fully conversant on how to complete drills associated with the site primary and secondary EOP's. Understand the function, purpose, nominal operating parameters, and how to operate/isolate and start up: MV/LV Distribution Boards, MV/LV Breakers, UPS, Generator, Batteries, STS, ATS, AHU, DX units, Chillers, Evap Washer Systems, CRAC Units, Fuel Systems, ASCO Systems, BMS System, EPMS System, and Fire Alarm System. Be conversant of the BMS and EPMS systems and the impact of any state change, capable of navigating the system, interpreting alarms, and able to perform controlled shutdowns/start-ups/equipment rotations. If applicable to the role, disable and enable fire alarm control panels and systems. Maintain maintenance records as required by City, State, and EPA regulations. Interpret building codes and local and federal regulations as they relate to installations and apply them as required by the site. Identify required materials and parts for maintenance and repair to facilitate procurement. Understand the heating cycle to include identify components in the heating system, understand how each component works, diagnose problems in the heating system using a gas pressure test and other devices for routine maintenance and to troubleshoot and repair. Understand the refrigeration cycles to include identifying components in advanced refrigeration circuits, understanding how each component works, diagnosing and correcting problems in the refrigeration circuit, using manifold gauge set, pressure/temperature chart and temperature measuring devices for routine maintenance and to troubleshoot. Knowledge of power density and parity with HVAC system capacities, and cooling and heat load/loss calculations. Qualifications High School Diploma or equivalent with minimum 6+ years of experience with electrical, mechanical, and fire/life safety equipment. Applicants must have a 3+ years of experience in a data center environment Applicants selected will be subject to a government security investigation and must meet eligibility requirements, to include U.S. Citizenship; Applicants selected must have an Active Secret Clearance or be able to obtain before assignment. Applicants identified as Mechanical shall have experience with centrifugal chillers greater than 300 tons, boilers, or significant other mechanical experiences Mechanical applicants must possess an EPA Certification Electrical applicants must hold a current Journeyman License Applicants identified as Electrical shall have experience with switchgear, generators, UPS or significant other electrical experiences D esired / Advantageous Qualifications: Possess a Journeyman Electrician License, Journeyman HVAC license or equivalent. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12-foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.
