Description: Take Ten Tire & Service is seeking a skilled Mobile Service Tech for our Oklahoma City store. Are you looking for a smaller company with BIG opportunities? If the answer is yes, then show us your skills! The primary role for this position is to support all levels of mechanical service to our customers. The Service Tech provides efficient, compreheThis position is all about supporting our customers with top-notch mechanical service. The Service Tech plays a key role in providing fast, thorough service that meets our quality and safety standards. Working closely with the team, you'll help create a positive experience for our customers. The Service Tech provides efficient, comprehensive support. This position is all about supporting our customers with top-notch mechanical service, helping provide essential customer experience, ensuring critical service that meets all our quality and safety requirements, and working as part of a team to deliver a positive customer experience. All work provided must follow company policies, procedures, and industry best practices, and no employee should attempt to do any work for which they have not been trained. Essential Functions • Diagnosis of problems on all operational systems of vehicles. • Prepare service estimates for the repair of vehicles and communicate any service needed. • Perform mechanical service and repair as indicated and in accordance with shop requirements. • Test drive vehicles and test components and systems using diagnostic tools and special service equipment. • Conduct a brief overall vehicle inspection to identify obvious safety or mechanical issues. • Communicate any additional service needs encountered, along with the time and cost scope to complete. • Execute repairs and maintenance to meet safety regulations and the manufacturer's specifications. • Make yourself available for and complete all required and additional training offered by the Company. • Understand and follow state and federal regulations applicable to the industry. • Work as a team to provide efficient and comprehensive service. • Maintain a clean and safe work environment with organized areas and regular cleanup. • Stock and assist with physical inventory. • Maintain tools and equipment in efficient operating condition. • Attend meetings held by Store Service Manager. • Process all necessary paperwork in a timely manner. • Observe all rules and procedures as trained and in accordance with Company policy. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential function. Requirements: Driver's License 2 years of tire and/or mechanic experience required Clean MVR Open to on-call work during the weekend and nights Compensation details: 18-23 Hourly Wage PIbaf4c494cfe0-4371
12/08/2025
Full time
Description: Take Ten Tire & Service is seeking a skilled Mobile Service Tech for our Oklahoma City store. Are you looking for a smaller company with BIG opportunities? If the answer is yes, then show us your skills! The primary role for this position is to support all levels of mechanical service to our customers. The Service Tech provides efficient, compreheThis position is all about supporting our customers with top-notch mechanical service. The Service Tech plays a key role in providing fast, thorough service that meets our quality and safety standards. Working closely with the team, you'll help create a positive experience for our customers. The Service Tech provides efficient, comprehensive support. This position is all about supporting our customers with top-notch mechanical service, helping provide essential customer experience, ensuring critical service that meets all our quality and safety requirements, and working as part of a team to deliver a positive customer experience. All work provided must follow company policies, procedures, and industry best practices, and no employee should attempt to do any work for which they have not been trained. Essential Functions • Diagnosis of problems on all operational systems of vehicles. • Prepare service estimates for the repair of vehicles and communicate any service needed. • Perform mechanical service and repair as indicated and in accordance with shop requirements. • Test drive vehicles and test components and systems using diagnostic tools and special service equipment. • Conduct a brief overall vehicle inspection to identify obvious safety or mechanical issues. • Communicate any additional service needs encountered, along with the time and cost scope to complete. • Execute repairs and maintenance to meet safety regulations and the manufacturer's specifications. • Make yourself available for and complete all required and additional training offered by the Company. • Understand and follow state and federal regulations applicable to the industry. • Work as a team to provide efficient and comprehensive service. • Maintain a clean and safe work environment with organized areas and regular cleanup. • Stock and assist with physical inventory. • Maintain tools and equipment in efficient operating condition. • Attend meetings held by Store Service Manager. • Process all necessary paperwork in a timely manner. • Observe all rules and procedures as trained and in accordance with Company policy. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential function. Requirements: Driver's License 2 years of tire and/or mechanic experience required Clean MVR Open to on-call work during the weekend and nights Compensation details: 18-23 Hourly Wage PIbaf4c494cfe0-4371
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Global Services (BGS) is currently hiring for a Mid OR Senior Level Customer Technical Training Specialists to support the Training Team in Seattle, WA Position Responsibilities (Level Dependent): Independently conducts customer training in broad subject areas using the approved medium to satisfy customer training requirements. Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives, and design. Develops, conducts, and evaluates effectiveness of technical training. Uses specialized software to research, configure, maintain, update, and develop new and existing media and materials. Travels for work up to 25% of the time. Ability to adjust shift. This position is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. Works under general supervision. May be asked to support other programs or perform other duties as needed. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. This position cannot be sponsored. Basic Qualifications (Required Skills/Experience): Experience interpreting commercial technical data including drawings, maintenance, and operations manuals. Experience conducting technical training and/or performing instructional system development. 5+ years' experience in aircraft maintenance and modification (This is time you were the technician physically working on the airplane with tools in hand). Capable of traveling 25% of the time. Preferred Qualifications (Desired Skills/Experience): 9+ years' experience or an equivalent combination of education and experience. Licensed Aircraft Mechanic. Associate's degree or higher. 2+ years' experience conducting technical training and/or performing instructional system development. Experience maintaining large complex commercial aircraft and have provided instruction on the same. Typical Education & Experience: Mid-Level: Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience, 9 years' related work experience, etc. Senior/Lead level: Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience, 13 years' related work experience, etc.) Relocation: This position does include relocation benefits for those who reside outside of the Seattle area by 50+ miles from their current commute. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. General: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level Summary Pay Range: $92,700 - $113,300 Lead-Level Summary Pay Range: $115,200 - $140,800 Applications for this position will be accepted until Dec. 17, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Global Services (BGS) is currently hiring for a Mid OR Senior Level Customer Technical Training Specialists to support the Training Team in Seattle, WA Position Responsibilities (Level Dependent): Independently conducts customer training in broad subject areas using the approved medium to satisfy customer training requirements. Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives, and design. Develops, conducts, and evaluates effectiveness of technical training. Uses specialized software to research, configure, maintain, update, and develop new and existing media and materials. Travels for work up to 25% of the time. Ability to adjust shift. This position is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. Works under general supervision. May be asked to support other programs or perform other duties as needed. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. This position cannot be sponsored. Basic Qualifications (Required Skills/Experience): Experience interpreting commercial technical data including drawings, maintenance, and operations manuals. Experience conducting technical training and/or performing instructional system development. 5+ years' experience in aircraft maintenance and modification (This is time you were the technician physically working on the airplane with tools in hand). Capable of traveling 25% of the time. Preferred Qualifications (Desired Skills/Experience): 9+ years' experience or an equivalent combination of education and experience. Licensed Aircraft Mechanic. Associate's degree or higher. 2+ years' experience conducting technical training and/or performing instructional system development. Experience maintaining large complex commercial aircraft and have provided instruction on the same. Typical Education & Experience: Mid-Level: Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience, 9 years' related work experience, etc. Senior/Lead level: Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience, 13 years' related work experience, etc.) Relocation: This position does include relocation benefits for those who reside outside of the Seattle area by 50+ miles from their current commute. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. General: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level Summary Pay Range: $92,700 - $113,300 Lead-Level Summary Pay Range: $115,200 - $140,800 Applications for this position will be accepted until Dec. 17, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Test & Evaluation Industrial Engineering team is seeking Methods Process Analysts to work in the Puget Sound area, reporting to either Seattle, WA, Tukwila, WA, or Everett, WA site. These positions provide Methods Process Analyst support to the Boeing Test & Evaluation Organization. We are filling positions in Lab Test supporting Fabrication, Assembly, Setup, and Test (FAST). The ideal candidate will apply business acumen and knowledge to partner with cross functional teams from operations, engineering, quality, supplier management, materials management, and program management to achieve organizational business goals and objectives. We are looking for dynamic thinkers, problem solvers, and leaders to drive results as Boeing continues its journey to becoming a Global Industrial Champion. We offer long-term potential for career growth in both technical leadership and/or management positions and highly value the curiosity, tenacity and imagination our analysts bring to our teams each day. BT&E is currently hiring for a broad range of experience levels including Entry-Level and Associate level Methods Process Analysts. Position Responsibilities Include: Conduct analysis of current and future business environment using established guidelines Develops forecast, acquisition, and utilization plans to optimize resources in support of company initiatives and program business plans Contributes to the development of test program labor hour estimates for new or revised work packages to support program business plans Development of recovery plans including data gathering, visibility development, and monitoring status to plan Monitors performance to established labor hour estimates Assists in developing, implementing, maintaining, and statuses integrated shop operating plans to maximize the efficiency of equipment and personnel and to meet cost and schedule commitments Assists in the identification and implementation of improvements to processes by analyzing current processes and utilizing established improvement methodologies to maximize the efficiency of equipment and personnel and to support company improvement initiatives Analyze changes to approved plans resulting from unplanned events and assesses the impact of the changes that occur to cost, schedule, resources and delivery Develops modifications to existing plans and obtains approval for plan changes Participate in negotiations to support schedule commitments or statement of work impacts Develops, implements, maintains, and statuses complex integrated shop operating plans to maximize the efficiency of equipment and personnel and to reduce inventory and meet cost and schedule commitments Basic Qualifications (Required Skills/Experience): Bachelor's degree or higher Ability to walk, stand, and enter into aircraft via steps or ladders Experience using Microsoft Office Products like Outlook, Power Point, Excel, and Word Preferred Qualifications (Desired Skills/Experience): Level 2: 3 or more years of related work experience or an equivalent combination of education and experience Bachelor's degree in Accounting, Finance, Business Administration, Business Management, Data Analytics, Marketing, Economics, Math, Industrial Technology, Engineering Technology, Operations Management, or Supply Chain Management 1+ years of experience in a manufacturing or test environment Experience working with LEAN manufacturing with knowledge of LEAN principles Experience with improvement projects Experience using Aurora Scheduling Software Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Union: This is a union-represented position. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range Entry-Level: $56,100 - $75,900 Summary pay range Associate: $66,300-$89,700 Applications for this position will be accepted until Dec. 11, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Test & Evaluation Industrial Engineering team is seeking Methods Process Analysts to work in the Puget Sound area, reporting to either Seattle, WA, Tukwila, WA, or Everett, WA site. These positions provide Methods Process Analyst support to the Boeing Test & Evaluation Organization. We are filling positions in Lab Test supporting Fabrication, Assembly, Setup, and Test (FAST). The ideal candidate will apply business acumen and knowledge to partner with cross functional teams from operations, engineering, quality, supplier management, materials management, and program management to achieve organizational business goals and objectives. We are looking for dynamic thinkers, problem solvers, and leaders to drive results as Boeing continues its journey to becoming a Global Industrial Champion. We offer long-term potential for career growth in both technical leadership and/or management positions and highly value the curiosity, tenacity and imagination our analysts bring to our teams each day. BT&E is currently hiring for a broad range of experience levels including Entry-Level and Associate level Methods Process Analysts. Position Responsibilities Include: Conduct analysis of current and future business environment using established guidelines Develops forecast, acquisition, and utilization plans to optimize resources in support of company initiatives and program business plans Contributes to the development of test program labor hour estimates for new or revised work packages to support program business plans Development of recovery plans including data gathering, visibility development, and monitoring status to plan Monitors performance to established labor hour estimates Assists in developing, implementing, maintaining, and statuses integrated shop operating plans to maximize the efficiency of equipment and personnel and to meet cost and schedule commitments Assists in the identification and implementation of improvements to processes by analyzing current processes and utilizing established improvement methodologies to maximize the efficiency of equipment and personnel and to support company improvement initiatives Analyze changes to approved plans resulting from unplanned events and assesses the impact of the changes that occur to cost, schedule, resources and delivery Develops modifications to existing plans and obtains approval for plan changes Participate in negotiations to support schedule commitments or statement of work impacts Develops, implements, maintains, and statuses complex integrated shop operating plans to maximize the efficiency of equipment and personnel and to reduce inventory and meet cost and schedule commitments Basic Qualifications (Required Skills/Experience): Bachelor's degree or higher Ability to walk, stand, and enter into aircraft via steps or ladders Experience using Microsoft Office Products like Outlook, Power Point, Excel, and Word Preferred Qualifications (Desired Skills/Experience): Level 2: 3 or more years of related work experience or an equivalent combination of education and experience Bachelor's degree in Accounting, Finance, Business Administration, Business Management, Data Analytics, Marketing, Economics, Math, Industrial Technology, Engineering Technology, Operations Management, or Supply Chain Management 1+ years of experience in a manufacturing or test environment Experience working with LEAN manufacturing with knowledge of LEAN principles Experience with improvement projects Experience using Aurora Scheduling Software Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Union: This is a union-represented position. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range Entry-Level: $56,100 - $75,900 Summary pay range Associate: $66,300-$89,700 Applications for this position will be accepted until Dec. 11, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Sr. Specialist, Manufacturing Engineer (Compression Molding) Job Code: 29166 Job Location: Huntsville, AL Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: We are seeking a Sr. Specialist, Manufacturing Engineer (Compression Molding) to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL , which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. The Sr. Specialist, Manufacturing Engineer (Compression Molding) is a senior professional with strong knowledge of job area and broad knowledge of project management. They manage complex projects or processes with general oversight. They communicate within and outside of their own function to gain cooperation on operational processes, practices, and procedures. They make moderate to substantial improvements to systems and processes and contributes to achievement of departmental goals and operating plans with direct impact on the departmental results. This is a dynamic team that requires motivated, self-starting individuals with hands-on experience. Manufacturing Engineers lead process management activities and create associated documentation for their assigned processes. They must be able to follow company procedures and requirements for the manufacture of advanced, man-rated, and high value aerospace hardware. Essential Functions: Provide technical expertise on compression molding operations using rubber, molding compounds, and/or prepreg. Champion process improvement projects using Lean Manufacturing methodologies. Train and mentor less experienced engineers. Lead transition efforts for programs moving from other L3Harris facilities to Huntsville. Lead qualifications efforts for new pieces of equipment. Plan, develop, initiate and maintain processes for the fabrication of advanced composite parts. Create detailed work instructions, procedures, PFMEAs, and JSAs that meet design, process, quality, safety, and environmental requirements. Provide technical guidance and/or training to shop floor, design and management teams. Analyze engineering drawings and specifications in support of developing robust and advanced part and tooling designs. Interface with all related support groups for processes to ensure accuracy, control and safety of the personnel and quality of the hardware. Perform investigations of nonconforming hardware and implement corrective actions to prevent future occurrences. Present fabrication processes at customer readiness reviews and present process changes to customers at change board meetings. Less than 5% travel may be required to support suppliers or other manufacturing sites. Occasional off-shift and weekend work required to support manufacturing schedules. Other duties as assigned. Ability to obtain US Security Clearence. Qualifications: Bachelor's Degree and minimum 6 years of prior relevant engineering experience. Graduate Degree and a minimum of 4 years of prior related engineering experience. In lieu of a degree, minimum of 10 years of prior related engineering experience. Preferred Additional Skills: Compression molding experience using rubber, molding compounds, and/or prepreg. Experience operating and programming hydraulic presses (up acting, down acting, shuttle presses, and/or vacuum presses). Surface preparation for primary substrates to bond rubber or composite is strongly desired. Hand layup and cure of insulation, composite and/or other materials is preferred. Experience writing specifications for new pieces of equipment. Strong GD&T background supporting part validation. CAD modeling experience. Experience with operation of robots, presses, ovens, winders, CNC machines, cutting tables and/or autoclaves. Strong cross-functional communication skills. Strong problem-solving skills. Adaptable to a changing work environment. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
12/08/2025
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Sr. Specialist, Manufacturing Engineer (Compression Molding) Job Code: 29166 Job Location: Huntsville, AL Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: We are seeking a Sr. Specialist, Manufacturing Engineer (Compression Molding) to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL , which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. The Sr. Specialist, Manufacturing Engineer (Compression Molding) is a senior professional with strong knowledge of job area and broad knowledge of project management. They manage complex projects or processes with general oversight. They communicate within and outside of their own function to gain cooperation on operational processes, practices, and procedures. They make moderate to substantial improvements to systems and processes and contributes to achievement of departmental goals and operating plans with direct impact on the departmental results. This is a dynamic team that requires motivated, self-starting individuals with hands-on experience. Manufacturing Engineers lead process management activities and create associated documentation for their assigned processes. They must be able to follow company procedures and requirements for the manufacture of advanced, man-rated, and high value aerospace hardware. Essential Functions: Provide technical expertise on compression molding operations using rubber, molding compounds, and/or prepreg. Champion process improvement projects using Lean Manufacturing methodologies. Train and mentor less experienced engineers. Lead transition efforts for programs moving from other L3Harris facilities to Huntsville. Lead qualifications efforts for new pieces of equipment. Plan, develop, initiate and maintain processes for the fabrication of advanced composite parts. Create detailed work instructions, procedures, PFMEAs, and JSAs that meet design, process, quality, safety, and environmental requirements. Provide technical guidance and/or training to shop floor, design and management teams. Analyze engineering drawings and specifications in support of developing robust and advanced part and tooling designs. Interface with all related support groups for processes to ensure accuracy, control and safety of the personnel and quality of the hardware. Perform investigations of nonconforming hardware and implement corrective actions to prevent future occurrences. Present fabrication processes at customer readiness reviews and present process changes to customers at change board meetings. Less than 5% travel may be required to support suppliers or other manufacturing sites. Occasional off-shift and weekend work required to support manufacturing schedules. Other duties as assigned. Ability to obtain US Security Clearence. Qualifications: Bachelor's Degree and minimum 6 years of prior relevant engineering experience. Graduate Degree and a minimum of 4 years of prior related engineering experience. In lieu of a degree, minimum of 10 years of prior related engineering experience. Preferred Additional Skills: Compression molding experience using rubber, molding compounds, and/or prepreg. Experience operating and programming hydraulic presses (up acting, down acting, shuttle presses, and/or vacuum presses). Surface preparation for primary substrates to bond rubber or composite is strongly desired. Hand layup and cure of insulation, composite and/or other materials is preferred. Experience writing specifications for new pieces of equipment. Strong GD&T background supporting part validation. CAD modeling experience. Experience with operation of robots, presses, ovens, winders, CNC machines, cutting tables and/or autoclaves. Strong cross-functional communication skills. Strong problem-solving skills. Adaptable to a changing work environment. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
University of New Mexico - Hospitals
Albuquerque, New Mexico
Sign-On Bonus Available Relocation Assistance Available Additional $6.00/hr. Safety Incentive Pay Minimum Offer $ 34.32/hr. Maximum Offer $ 46.82/hr. Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. Department: MDC - Medical FTE: 1.00 Full Time Shift: Days Position Summary: Function as unit educator, master teacher, master preceptor and facilitates evidenced-based research into specialized areas of nursing. Utilize the expertise of a practitioner to incorporate nursing processes into the plan of care for a specialized group of patients. Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit. Ensure adherence to Hospitals and departmental policies, procedures and guidelines. Patient care assignment may include neonate, pediatric, adolescent, adult and geriatric age groups. Detailed responsibilities: LEAD - Provide educational leadership to enhance specialized patient care within clinical protocols INITIATE - Initiate unit-based strategies for developing clinical skills through the master clinician, master preceptor model PERFORM - Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit PLAN - Develop patient plans of care incorporating evidenced-based research and national standards CONSULTS - Consult with and serve as a clinical resource for the multidisciplinary team to ensure quality patient care EDUCATE - Educate appropriate staff in the use of new equipment, supplies, and instruments for their service; coordinates in-service training/workshops for appropriate staff ASSIST - Assist patient and caregivers with educational needs, problem solving, and health management aspects across the continuum of care COLLABORATE - Collaborate with the Clinical Educator as well as the Clinical Nurse Specialist, Specialty RN, or Unit Director to plan and implement pertinent curricula MONITOR - Monitor trends and implement educational strategies to ensure quality standards and parameters are achieved PATIENT CARE - Deliver safe direct care to an assigned group of patients, providing specialized patient care within nursing protocols and assisting the admission, transfer and discharge process performing all RN nursing duties DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings PATIENT CARE - Write treatment plans; coordinate patient drug and procedure activities; administer medication and treatment; provide and coordinate nursing care of assigned patients; may facilitate group therapy and/or education sessions Qualifications Education: Essential: Bachelor's Degree Nonessential: Master's Degree Education specialization: Essential: BSN or MSN Nonessential: Nursing Experience: Essential: 18 months directly related experience Nonessential: Bilingual English, Spanish, Keres, Tewa, Tiwa, Towa, Zuni, or Navajo 3 years directly related experience Credentials: Essential: CPR for Healthcare/BLS Prov or Prof Rescuers w/in 30 days RN in NM or as allowed by reciprocal agreement by NM Instructor in Unit-Required Certifications w/in 90 Days Nonessential: Current Instructor in BLS, ACLS, NRP or other instruct cert Credential equivalent experience: Essential: Instructor in Unit-Required Certifications or obtained within one year of position (BLS, ILS, NRP, PALS, ACLS, TNCC, etc) Physical Conditions: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Working conditions: Essential: Sig Hazard: Chemicals, Bio Hazardous Materials req PPE Tuberculosis testing is completed upon hire and additionally as required Sig Haz: Physical risk/injuries due to combative patients Sub to work in close proximity to incarcerated individuals Must obtain and maintain MDC security clearance as required condition of employment Department: Registered Nurse
12/08/2025
Full time
Sign-On Bonus Available Relocation Assistance Available Additional $6.00/hr. Safety Incentive Pay Minimum Offer $ 34.32/hr. Maximum Offer $ 46.82/hr. Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. Department: MDC - Medical FTE: 1.00 Full Time Shift: Days Position Summary: Function as unit educator, master teacher, master preceptor and facilitates evidenced-based research into specialized areas of nursing. Utilize the expertise of a practitioner to incorporate nursing processes into the plan of care for a specialized group of patients. Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit. Ensure adherence to Hospitals and departmental policies, procedures and guidelines. Patient care assignment may include neonate, pediatric, adolescent, adult and geriatric age groups. Detailed responsibilities: LEAD - Provide educational leadership to enhance specialized patient care within clinical protocols INITIATE - Initiate unit-based strategies for developing clinical skills through the master clinician, master preceptor model PERFORM - Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit PLAN - Develop patient plans of care incorporating evidenced-based research and national standards CONSULTS - Consult with and serve as a clinical resource for the multidisciplinary team to ensure quality patient care EDUCATE - Educate appropriate staff in the use of new equipment, supplies, and instruments for their service; coordinates in-service training/workshops for appropriate staff ASSIST - Assist patient and caregivers with educational needs, problem solving, and health management aspects across the continuum of care COLLABORATE - Collaborate with the Clinical Educator as well as the Clinical Nurse Specialist, Specialty RN, or Unit Director to plan and implement pertinent curricula MONITOR - Monitor trends and implement educational strategies to ensure quality standards and parameters are achieved PATIENT CARE - Deliver safe direct care to an assigned group of patients, providing specialized patient care within nursing protocols and assisting the admission, transfer and discharge process performing all RN nursing duties DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings PATIENT CARE - Write treatment plans; coordinate patient drug and procedure activities; administer medication and treatment; provide and coordinate nursing care of assigned patients; may facilitate group therapy and/or education sessions Qualifications Education: Essential: Bachelor's Degree Nonessential: Master's Degree Education specialization: Essential: BSN or MSN Nonessential: Nursing Experience: Essential: 18 months directly related experience Nonessential: Bilingual English, Spanish, Keres, Tewa, Tiwa, Towa, Zuni, or Navajo 3 years directly related experience Credentials: Essential: CPR for Healthcare/BLS Prov or Prof Rescuers w/in 30 days RN in NM or as allowed by reciprocal agreement by NM Instructor in Unit-Required Certifications w/in 90 Days Nonessential: Current Instructor in BLS, ACLS, NRP or other instruct cert Credential equivalent experience: Essential: Instructor in Unit-Required Certifications or obtained within one year of position (BLS, ILS, NRP, PALS, ACLS, TNCC, etc) Physical Conditions: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Working conditions: Essential: Sig Hazard: Chemicals, Bio Hazardous Materials req PPE Tuberculosis testing is completed upon hire and additionally as required Sig Haz: Physical risk/injuries due to combative patients Sub to work in close proximity to incarcerated individuals Must obtain and maintain MDC security clearance as required condition of employment Department: Registered Nurse
Be part of an amazing story Macy's is more than just a store. We're a story. One that's captured the hearts and minds of America for more than 160 years. A story about innovations and traditions about inspiring stores and irresistible products about the excitement of the Macy's 4th of July Fireworks, and the wonder of the Thanksgiving Day Parade. We've been part of memorable moments and milestones for countless customers and colleagues. Those stories are part of what makes this such a special place to work . Job Overview As a Cosmetic Sales Colleague - also known as a Beauty Advisor - you are the trusted expert our customers turn to for all things beauty. Passionate about both products and people, you play a key role in creating a personalized and inspiring shopping experience that builds confidence and drives sales. You'll serve as both an educator and a beauty expert - offering expert advice, conducting product demonstrations, and providing tailored consultations that may include makeup application and skincare recommendations. Your deep product knowledge and ability to stay current on trends allow you to introduce customers to new items and innovations that match their unique needs and style. Building lasting client relationships is at the heart of your role. You'll proactively grow and manage a loyal client base through consistent follow-up, virtual outreach, and personalized service - always with the goal of exceeding expectations and achieving sales goals. By combining genuine hospitality, strong product knowledge, and a passion for beauty, you'll help every customer leave feeling confident, cared for, and excited to return. How our Beauty Colleagues spend their day Our colleagues begin each day energized and ready to make an impact . They wear their name badge with pride, greet teammates with a warm hello, and help ensure the sales floor is clean, organized, and prepared for customers. Before getting started, they review their sales goals, learn about new arrivals and top-selling items, and stay up to date on current trends and promotions - so they're fully informed and ready to engage, educate, and sell with confidence. On the floor, they focus on the customer - offering a warm welcome, making eye contact, and creating friendly, personal conversations to create customer relationships to bring the customers back. Throughout the day, they maintain a shoppable space by maintaining the counter and sales floor, refresh signage and pricing, and assist with merchandise moves as needed to support a seamless customer experience. .They always Finish Strong - sharing our Loyalty program benefits, making sure customers have all they need, and ending with a sincere thank-you, often walking the package around and using the customer's name. We believe service starts with each other - supporting one another with honesty, care, and collaboration so we can better serve our customers and communities. And we know that excellence is a journey - we strive to improve every day , take pride in our work, achieve sales goals and learn from each other to deliver individual and store results. Full-time colleagues are typically scheduled to work 30 or more hours per week, while part-time colleagues are typically scheduled 12-24 hours per week. All schedules contain weekend shifts as part of the requirements. Hours are dependent on business needs and colleague availability. Information regarding hours per week needed for benefit eligibility purposes can be found here . Who You Are Flexible availability, including days, evenings, weekends and holidays with regular, dependable attendance and punctuality Must be able to: Understand and communicate effectively with customers, co-workers, and supervisors Read and understand employment policies and safety rules/procedures in English Deliver personalized beauty experiences by building relationships with customers, uncovering their needs, demonstrating product application, and educating them on the benefits and use of beauty products. Drive sales and client loyalty by maintaining an organized and shoppable space, leveraging clienteling tools to promote offers and product launches, participating in sales events, and staying up to date through ongoing training and vendor education. Meeting and surpassing daily sales goals by delivering exceptional service Responsible for acquiring new customers by opening credit accounts and sharing loyalty benefits Effectively use point-of-sale technology and digital tools to streamline transactions and enhance the shopping experience At least 1 year of customer service or selling experience required Essential Physical Requirements You Will Perform This position requires talking, lifting, constant moving, standing, and reaching with arms and hands. Standing for at least two consecutive hours, lifting at least 25lbs., stooping, kneeling, crouching, and climbing ladders, reaching, including above eye level Requires close vision, color vision, depth perception, and focus adjustment Frequent use of computers and other technology, necessary to perform job functions, including handheld equipment, cash register and ability to process register transactions What We Can Offer You Join a team where work is as rewarding as it is fun! We offer a dynamic, inclusive environment with competitive pay and benefits. Enjoy comprehensive health and wellness coverage and a 401(k) match to invest in your future. Prioritize your well-being with paid time off and eight paid holidays. Grow your career with continuous learning and leadership development. Plus, build community by joining one of our Colleague Resource Groups and make a difference through our volunteer opportunities. Some additional benefits we offer include: Merchandise discounts Performance-based incentives Annual merit review Employee Assistance Program with mental health counseling and legal/financial advice Access the full menu of benefits offerings here . About Us This is a great time to join Macy's! Whether you're helping a customer find the perfect gift, streamlining operations in one of our distribution centers, enhancing our online shopping experience, buying in-style and on-trend merchandise to outfit our customers, or designing a balloon for the Thanksgiving Day Parade, we offer unique opportunities to be part of some of the most memorable moments in people's lives. Join us and help write the next chapter in our story - Apply Today! This job description is not all-inclusive and may not apply to colleagues covered by a collective bargaining agreement. Macy's Inc. reserves the right to amend this job description at any time. Macy's Inc. is an Equal Opportunity Employer, committed to an inclusive work environment. BEAUTY00 This position may be eligible for performance-based incentives/bonuses. Benefits include 401k, medical/vision/dental/life/disability insurance options, PTO accruals, Holidays, and more. Eligibility requirements may apply based on location, job level, classification, and length of employment. Additional benefit details are available at .
12/08/2025
Full time
Be part of an amazing story Macy's is more than just a store. We're a story. One that's captured the hearts and minds of America for more than 160 years. A story about innovations and traditions about inspiring stores and irresistible products about the excitement of the Macy's 4th of July Fireworks, and the wonder of the Thanksgiving Day Parade. We've been part of memorable moments and milestones for countless customers and colleagues. Those stories are part of what makes this such a special place to work . Job Overview As a Cosmetic Sales Colleague - also known as a Beauty Advisor - you are the trusted expert our customers turn to for all things beauty. Passionate about both products and people, you play a key role in creating a personalized and inspiring shopping experience that builds confidence and drives sales. You'll serve as both an educator and a beauty expert - offering expert advice, conducting product demonstrations, and providing tailored consultations that may include makeup application and skincare recommendations. Your deep product knowledge and ability to stay current on trends allow you to introduce customers to new items and innovations that match their unique needs and style. Building lasting client relationships is at the heart of your role. You'll proactively grow and manage a loyal client base through consistent follow-up, virtual outreach, and personalized service - always with the goal of exceeding expectations and achieving sales goals. By combining genuine hospitality, strong product knowledge, and a passion for beauty, you'll help every customer leave feeling confident, cared for, and excited to return. How our Beauty Colleagues spend their day Our colleagues begin each day energized and ready to make an impact . They wear their name badge with pride, greet teammates with a warm hello, and help ensure the sales floor is clean, organized, and prepared for customers. Before getting started, they review their sales goals, learn about new arrivals and top-selling items, and stay up to date on current trends and promotions - so they're fully informed and ready to engage, educate, and sell with confidence. On the floor, they focus on the customer - offering a warm welcome, making eye contact, and creating friendly, personal conversations to create customer relationships to bring the customers back. Throughout the day, they maintain a shoppable space by maintaining the counter and sales floor, refresh signage and pricing, and assist with merchandise moves as needed to support a seamless customer experience. .They always Finish Strong - sharing our Loyalty program benefits, making sure customers have all they need, and ending with a sincere thank-you, often walking the package around and using the customer's name. We believe service starts with each other - supporting one another with honesty, care, and collaboration so we can better serve our customers and communities. And we know that excellence is a journey - we strive to improve every day , take pride in our work, achieve sales goals and learn from each other to deliver individual and store results. Full-time colleagues are typically scheduled to work 30 or more hours per week, while part-time colleagues are typically scheduled 12-24 hours per week. All schedules contain weekend shifts as part of the requirements. Hours are dependent on business needs and colleague availability. Information regarding hours per week needed for benefit eligibility purposes can be found here . Who You Are Flexible availability, including days, evenings, weekends and holidays with regular, dependable attendance and punctuality Must be able to: Understand and communicate effectively with customers, co-workers, and supervisors Read and understand employment policies and safety rules/procedures in English Deliver personalized beauty experiences by building relationships with customers, uncovering their needs, demonstrating product application, and educating them on the benefits and use of beauty products. Drive sales and client loyalty by maintaining an organized and shoppable space, leveraging clienteling tools to promote offers and product launches, participating in sales events, and staying up to date through ongoing training and vendor education. Meeting and surpassing daily sales goals by delivering exceptional service Responsible for acquiring new customers by opening credit accounts and sharing loyalty benefits Effectively use point-of-sale technology and digital tools to streamline transactions and enhance the shopping experience At least 1 year of customer service or selling experience required Essential Physical Requirements You Will Perform This position requires talking, lifting, constant moving, standing, and reaching with arms and hands. Standing for at least two consecutive hours, lifting at least 25lbs., stooping, kneeling, crouching, and climbing ladders, reaching, including above eye level Requires close vision, color vision, depth perception, and focus adjustment Frequent use of computers and other technology, necessary to perform job functions, including handheld equipment, cash register and ability to process register transactions What We Can Offer You Join a team where work is as rewarding as it is fun! We offer a dynamic, inclusive environment with competitive pay and benefits. Enjoy comprehensive health and wellness coverage and a 401(k) match to invest in your future. Prioritize your well-being with paid time off and eight paid holidays. Grow your career with continuous learning and leadership development. Plus, build community by joining one of our Colleague Resource Groups and make a difference through our volunteer opportunities. Some additional benefits we offer include: Merchandise discounts Performance-based incentives Annual merit review Employee Assistance Program with mental health counseling and legal/financial advice Access the full menu of benefits offerings here . About Us This is a great time to join Macy's! Whether you're helping a customer find the perfect gift, streamlining operations in one of our distribution centers, enhancing our online shopping experience, buying in-style and on-trend merchandise to outfit our customers, or designing a balloon for the Thanksgiving Day Parade, we offer unique opportunities to be part of some of the most memorable moments in people's lives. Join us and help write the next chapter in our story - Apply Today! This job description is not all-inclusive and may not apply to colleagues covered by a collective bargaining agreement. Macy's Inc. reserves the right to amend this job description at any time. Macy's Inc. is an Equal Opportunity Employer, committed to an inclusive work environment. BEAUTY00 This position may be eligible for performance-based incentives/bonuses. Benefits include 401k, medical/vision/dental/life/disability insurance options, PTO accruals, Holidays, and more. Eligibility requirements may apply based on location, job level, classification, and length of employment. Additional benefit details are available at .
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Global Services (BGS) is seeking an Experienced and Lead Level Customer Technical Training Specialist to support the Training Team in Seattle, WA. The primary focus of this role is to develop, conduct and evaluate the effectiveness of technical training. This focus requires the analyses of customer technical training needs to determine appropriate training content, objectives, and design. Additional duties of the role include research, courseware updates, and the development of new media in support of customer training. This is an on-site Seattle position and is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. are occasionally required, as is travel both domestically and internationally up to 25% of the time. Position Responsibilities: Independently conducts customer training in broad subject areas using the approved medium to satisfy customer training requirements. Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives, and design. Develops, conducts, and evaluates effectiveness of technical training. Uses specialized software to research, configure, maintain, update, and develop new and existing media and materials. Travels for work up to 25% of the time. Ability to adjust shift. This position is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. Works under general supervision. May be asked to support other programs or perform other duties as needed. Basic Qualifications (Required Skills/Experience): Experience interpreting commercial technical data including drawings, maintenance, and operations manuals. Experience conducting technical training and/or performing instructional system development. 5+ years' experience in aircraft maintenance and modification (This is time you were the technician physically working on the airplane with tools in hand). Capable of traveling 25% of the time both domestically and internationally. Preferred Qualifications (Desired Skills/Experience): 5+ years' of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.). Licensed Aircraft Mechanic. Associate's degree or higher. 2+ years' experience conducting technical training and/or performing instructional system development. Experience maintaining large complex commercial aircraft and have provided instruction on the same. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. General: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Experience-Level Summary Pay Range: $82,450 - $111,550 Lead-Level Summary Pay Range: $102,850 - $139,150 Applications for this position will be accepted until Dec. 12, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Global Services (BGS) is seeking an Experienced and Lead Level Customer Technical Training Specialist to support the Training Team in Seattle, WA. The primary focus of this role is to develop, conduct and evaluate the effectiveness of technical training. This focus requires the analyses of customer technical training needs to determine appropriate training content, objectives, and design. Additional duties of the role include research, courseware updates, and the development of new media in support of customer training. This is an on-site Seattle position and is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. are occasionally required, as is travel both domestically and internationally up to 25% of the time. Position Responsibilities: Independently conducts customer training in broad subject areas using the approved medium to satisfy customer training requirements. Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives, and design. Develops, conducts, and evaluates effectiveness of technical training. Uses specialized software to research, configure, maintain, update, and develop new and existing media and materials. Travels for work up to 25% of the time. Ability to adjust shift. This position is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. Works under general supervision. May be asked to support other programs or perform other duties as needed. Basic Qualifications (Required Skills/Experience): Experience interpreting commercial technical data including drawings, maintenance, and operations manuals. Experience conducting technical training and/or performing instructional system development. 5+ years' experience in aircraft maintenance and modification (This is time you were the technician physically working on the airplane with tools in hand). Capable of traveling 25% of the time both domestically and internationally. Preferred Qualifications (Desired Skills/Experience): 5+ years' of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.). Licensed Aircraft Mechanic. Associate's degree or higher. 2+ years' experience conducting technical training and/or performing instructional system development. Experience maintaining large complex commercial aircraft and have provided instruction on the same. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. General: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Experience-Level Summary Pay Range: $82,450 - $111,550 Lead-Level Summary Pay Range: $102,850 - $139,150 Applications for this position will be accepted until Dec. 12, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
University of New Mexico - Hospitals
Albuquerque, New Mexico
Sign-On Bonus Available Relocation Assistance Available Additional $6.00/hr. Safety Incentive Pay Minimum Offer $ 34.32/hr. Maximum Offer $ 46.82/hr. Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. Department: MDC - Medical FTE: 1.00 Full Time Shift: Days Position Summary: Function as unit educator, master teacher, master preceptor and facilitates evidenced-based research into specialized areas of nursing. Utilize the expertise of a practitioner to incorporate nursing processes into the plan of care for a specialized group of patients. Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit. Ensure adherence to Hospitals and departmental policies, procedures and guidelines. Patient care assignment may include neonate, pediatric, adolescent, adult and geriatric age groups. Detailed responsibilities: LEAD - Provide educational leadership to enhance specialized patient care within clinical protocols INITIATE - Initiate unit-based strategies for developing clinical skills through the master clinician, master preceptor model PERFORM - Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit PLAN - Develop patient plans of care incorporating evidenced-based research and national standards CONSULTS - Consult with and serve as a clinical resource for the multidisciplinary team to ensure quality patient care EDUCATE - Educate appropriate staff in the use of new equipment, supplies, and instruments for their service; coordinates in-service training/workshops for appropriate staff ASSIST - Assist patient and caregivers with educational needs, problem solving, and health management aspects across the continuum of care COLLABORATE - Collaborate with the Clinical Educator as well as the Clinical Nurse Specialist, Specialty RN, or Unit Director to plan and implement pertinent curricula MONITOR - Monitor trends and implement educational strategies to ensure quality standards and parameters are achieved PATIENT CARE - Deliver safe direct care to an assigned group of patients, providing specialized patient care within nursing protocols and assisting the admission, transfer and discharge process performing all RN nursing duties DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings PATIENT CARE - Write treatment plans; coordinate patient drug and procedure activities; administer medication and treatment; provide and coordinate nursing care of assigned patients; may facilitate group therapy and/or education sessions Qualifications Education: Essential: Bachelor's Degree Nonessential: Master's Degree Education specialization: Essential: BSN or MSN Nonessential: Nursing Experience: Essential: 18 months directly related experience Nonessential: Bilingual English, Spanish, Keres, Tewa, Tiwa, Towa, Zuni, or Navajo 3 years directly related experience Credentials: Essential: CPR for Healthcare/BLS Prov or Prof Rescuers w/in 30 days RN in NM or as allowed by reciprocal agreement by NM Instructor in Unit-Required Certifications w/in 90 Days Nonessential: Current Instructor in BLS, ACLS, NRP or other instruct cert Credential equivalent experience: Essential: Instructor in Unit-Required Certifications or obtained within one year of position (BLS, ILS, NRP, PALS, ACLS, TNCC, etc) Physical Conditions: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Working conditions: Essential: Sig Hazard: Chemicals, Bio Hazardous Materials req PPE Tuberculosis testing is completed upon hire and additionally as required Sig Haz: Physical risk/injuries due to combative patients Sub to work in close proximity to incarcerated individuals Must obtain and maintain MDC security clearance as required condition of employment Department: Registered Nurse
12/08/2025
Full time
Sign-On Bonus Available Relocation Assistance Available Additional $6.00/hr. Safety Incentive Pay Minimum Offer $ 34.32/hr. Maximum Offer $ 46.82/hr. Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. Department: MDC - Medical FTE: 1.00 Full Time Shift: Days Position Summary: Function as unit educator, master teacher, master preceptor and facilitates evidenced-based research into specialized areas of nursing. Utilize the expertise of a practitioner to incorporate nursing processes into the plan of care for a specialized group of patients. Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit. Ensure adherence to Hospitals and departmental policies, procedures and guidelines. Patient care assignment may include neonate, pediatric, adolescent, adult and geriatric age groups. Detailed responsibilities: LEAD - Provide educational leadership to enhance specialized patient care within clinical protocols INITIATE - Initiate unit-based strategies for developing clinical skills through the master clinician, master preceptor model PERFORM - Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit PLAN - Develop patient plans of care incorporating evidenced-based research and national standards CONSULTS - Consult with and serve as a clinical resource for the multidisciplinary team to ensure quality patient care EDUCATE - Educate appropriate staff in the use of new equipment, supplies, and instruments for their service; coordinates in-service training/workshops for appropriate staff ASSIST - Assist patient and caregivers with educational needs, problem solving, and health management aspects across the continuum of care COLLABORATE - Collaborate with the Clinical Educator as well as the Clinical Nurse Specialist, Specialty RN, or Unit Director to plan and implement pertinent curricula MONITOR - Monitor trends and implement educational strategies to ensure quality standards and parameters are achieved PATIENT CARE - Deliver safe direct care to an assigned group of patients, providing specialized patient care within nursing protocols and assisting the admission, transfer and discharge process performing all RN nursing duties DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings PATIENT CARE - Write treatment plans; coordinate patient drug and procedure activities; administer medication and treatment; provide and coordinate nursing care of assigned patients; may facilitate group therapy and/or education sessions Qualifications Education: Essential: Bachelor's Degree Nonessential: Master's Degree Education specialization: Essential: BSN or MSN Nonessential: Nursing Experience: Essential: 18 months directly related experience Nonessential: Bilingual English, Spanish, Keres, Tewa, Tiwa, Towa, Zuni, or Navajo 3 years directly related experience Credentials: Essential: CPR for Healthcare/BLS Prov or Prof Rescuers w/in 30 days RN in NM or as allowed by reciprocal agreement by NM Instructor in Unit-Required Certifications w/in 90 Days Nonessential: Current Instructor in BLS, ACLS, NRP or other instruct cert Credential equivalent experience: Essential: Instructor in Unit-Required Certifications or obtained within one year of position (BLS, ILS, NRP, PALS, ACLS, TNCC, etc) Physical Conditions: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Working conditions: Essential: Sig Hazard: Chemicals, Bio Hazardous Materials req PPE Tuberculosis testing is completed upon hire and additionally as required Sig Haz: Physical risk/injuries due to combative patients Sub to work in close proximity to incarcerated individuals Must obtain and maintain MDC security clearance as required condition of employment Department: Registered Nurse
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines (BCA), ETC (Electrical Technical Center) Electrical Design organization has a great opportunity for a Wiring Design Engineer (Experienced or Senior) in Everett, WA and Renton, WA to help us define the future of commercial aerospace with innovative ideas that advance or culture of safety and quality that our customers, the flying public, expect. Our teams are currently hiring for a broad range of experience levels including; Experienced and Senior Wiring Design Engineers. Position Responsibilities: Develop and maintain electrical wire harness detail, assembly and installation designs for our diverse portfolio of advanced Commercial Aircraft. Our greatest current need involves developing, integrating and maintaining critical electrical cable/wire harness detail, assembly and installation designs. This includes integrating the functional system requirements into an efficient logical and physical wire harness architecture throughout the airplane. You must take into account such requirements as proper materials and parts selection based on electrical and environmental properties, functional separation based on systems safety and failure analysis, and efficient build processes. All while ensuring that Safety and Quality are the number 1 priority. Develop and analyze engineering design disposition on discrepancies (e.g., rejection tags, production action requests and shop revision requests). This often involves working closely and collaborating with our partners on the factory floor to ensure our designs can be built efficiently and safely. Follow and look for improvements to documented processes, specifications and procedures that support safe and quality design and manufacture of electrical commodities. Develop basic statements of work. Also, participate in technical reviews of supplier capabilities to facilitate source selection. Analyze functional and physical requirements to assure the development of integrated designs and system architecture. Actively supporting critical analysis and design reviews. Work with and under general supervision of a lead engineer and an expert mentor to enhance both your technical learning and career growth. Work Authorization: The position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. 3+ years of experience with wire harness, electrical and/or mechanical design. Preferred Qualifications (Desired Skills/Experience): 5+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience using wire design tools such as WIRS, MAPPER, CADDS and/or Capital Logic. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union: This is a union-represented position. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Experienced (Level 3): $104,550 - $141,450 Senior (Level 4): $128,350 - $173,650 Additional Information: Formal training is available as part of the job. All information provided will be checked and may be verified. Applications for this position will be accepted until Dec. 15, 2025 Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines (BCA), ETC (Electrical Technical Center) Electrical Design organization has a great opportunity for a Wiring Design Engineer (Experienced or Senior) in Everett, WA and Renton, WA to help us define the future of commercial aerospace with innovative ideas that advance or culture of safety and quality that our customers, the flying public, expect. Our teams are currently hiring for a broad range of experience levels including; Experienced and Senior Wiring Design Engineers. Position Responsibilities: Develop and maintain electrical wire harness detail, assembly and installation designs for our diverse portfolio of advanced Commercial Aircraft. Our greatest current need involves developing, integrating and maintaining critical electrical cable/wire harness detail, assembly and installation designs. This includes integrating the functional system requirements into an efficient logical and physical wire harness architecture throughout the airplane. You must take into account such requirements as proper materials and parts selection based on electrical and environmental properties, functional separation based on systems safety and failure analysis, and efficient build processes. All while ensuring that Safety and Quality are the number 1 priority. Develop and analyze engineering design disposition on discrepancies (e.g., rejection tags, production action requests and shop revision requests). This often involves working closely and collaborating with our partners on the factory floor to ensure our designs can be built efficiently and safely. Follow and look for improvements to documented processes, specifications and procedures that support safe and quality design and manufacture of electrical commodities. Develop basic statements of work. Also, participate in technical reviews of supplier capabilities to facilitate source selection. Analyze functional and physical requirements to assure the development of integrated designs and system architecture. Actively supporting critical analysis and design reviews. Work with and under general supervision of a lead engineer and an expert mentor to enhance both your technical learning and career growth. Work Authorization: The position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. 3+ years of experience with wire harness, electrical and/or mechanical design. Preferred Qualifications (Desired Skills/Experience): 5+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience using wire design tools such as WIRS, MAPPER, CADDS and/or Capital Logic. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union: This is a union-represented position. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Experienced (Level 3): $104,550 - $141,450 Senior (Level 4): $128,350 - $173,650 Additional Information: Formal training is available as part of the job. All information provided will be checked and may be verified. Applications for this position will be accepted until Dec. 15, 2025 Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Test & Evaluation Industrial Engineering team is seeking Methods Process Analysts to work in the Puget Sound area, reporting to either Seattle, WA, Tukwila, WA, or Everett, WA site. These positions provide Methods Process Analyst support to the Boeing Test & Evaluation Organization. We are filling positions in Lab Test supporting Fabrication, Assembly, Setup, and Test (FAST). The ideal candidate will apply business acumen and knowledge to partner with cross functional teams from operations, engineering, quality, supplier management, materials management, and program management to achieve organizational business goals and objectives. We are looking for dynamic thinkers, problem solvers, and leaders to drive results as Boeing continues its journey to becoming a Global Industrial Champion. We offer long-term potential for career growth in both technical leadership and/or management positions and highly value the curiosity, tenacity and imagination our analysts bring to our teams each day. BT&E is currently hiring for a broad range of experience levels including Entry-Level and Associate level Methods Process Analysts. Position Responsibilities Include: Conduct analysis of current and future business environment using established guidelines Develops forecast, acquisition, and utilization plans to optimize resources in support of company initiatives and program business plans Contributes to the development of test program labor hour estimates for new or revised work packages to support program business plans Development of recovery plans including data gathering, visibility development, and monitoring status to plan Monitors performance to established labor hour estimates Assists in developing, implementing, maintaining, and statuses integrated shop operating plans to maximize the efficiency of equipment and personnel and to meet cost and schedule commitments Assists in the identification and implementation of improvements to processes by analyzing current processes and utilizing established improvement methodologies to maximize the efficiency of equipment and personnel and to support company improvement initiatives Analyze changes to approved plans resulting from unplanned events and assesses the impact of the changes that occur to cost, schedule, resources and delivery Develops modifications to existing plans and obtains approval for plan changes Participate in negotiations to support schedule commitments or statement of work impacts Develops, implements, maintains, and statuses complex integrated shop operating plans to maximize the efficiency of equipment and personnel and to reduce inventory and meet cost and schedule commitments Basic Qualifications (Required Skills/Experience): Bachelor's degree or higher Ability to walk, stand, and enter into aircraft via steps or ladders Experience using Microsoft Office Products like Outlook, Power Point, Excel, and Word Preferred Qualifications (Desired Skills/Experience): Level 2: 3 or more years of related work experience or an equivalent combination of education and experience Bachelor's degree in Accounting, Finance, Business Administration, Business Management, Data Analytics, Marketing, Economics, Math, Industrial Technology, Engineering Technology, Operations Management, or Supply Chain Management 1+ years of experience in a manufacturing or test environment Experience working with LEAN manufacturing with knowledge of LEAN principles Experience with improvement projects Experience using Aurora Scheduling Software Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Union: This is a union-represented position. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range Entry-Level: $56,100 - $75,900 Summary pay range Associate: $66,300-$89,700 Applications for this position will be accepted until Dec. 11, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Test & Evaluation Industrial Engineering team is seeking Methods Process Analysts to work in the Puget Sound area, reporting to either Seattle, WA, Tukwila, WA, or Everett, WA site. These positions provide Methods Process Analyst support to the Boeing Test & Evaluation Organization. We are filling positions in Lab Test supporting Fabrication, Assembly, Setup, and Test (FAST). The ideal candidate will apply business acumen and knowledge to partner with cross functional teams from operations, engineering, quality, supplier management, materials management, and program management to achieve organizational business goals and objectives. We are looking for dynamic thinkers, problem solvers, and leaders to drive results as Boeing continues its journey to becoming a Global Industrial Champion. We offer long-term potential for career growth in both technical leadership and/or management positions and highly value the curiosity, tenacity and imagination our analysts bring to our teams each day. BT&E is currently hiring for a broad range of experience levels including Entry-Level and Associate level Methods Process Analysts. Position Responsibilities Include: Conduct analysis of current and future business environment using established guidelines Develops forecast, acquisition, and utilization plans to optimize resources in support of company initiatives and program business plans Contributes to the development of test program labor hour estimates for new or revised work packages to support program business plans Development of recovery plans including data gathering, visibility development, and monitoring status to plan Monitors performance to established labor hour estimates Assists in developing, implementing, maintaining, and statuses integrated shop operating plans to maximize the efficiency of equipment and personnel and to meet cost and schedule commitments Assists in the identification and implementation of improvements to processes by analyzing current processes and utilizing established improvement methodologies to maximize the efficiency of equipment and personnel and to support company improvement initiatives Analyze changes to approved plans resulting from unplanned events and assesses the impact of the changes that occur to cost, schedule, resources and delivery Develops modifications to existing plans and obtains approval for plan changes Participate in negotiations to support schedule commitments or statement of work impacts Develops, implements, maintains, and statuses complex integrated shop operating plans to maximize the efficiency of equipment and personnel and to reduce inventory and meet cost and schedule commitments Basic Qualifications (Required Skills/Experience): Bachelor's degree or higher Ability to walk, stand, and enter into aircraft via steps or ladders Experience using Microsoft Office Products like Outlook, Power Point, Excel, and Word Preferred Qualifications (Desired Skills/Experience): Level 2: 3 or more years of related work experience or an equivalent combination of education and experience Bachelor's degree in Accounting, Finance, Business Administration, Business Management, Data Analytics, Marketing, Economics, Math, Industrial Technology, Engineering Technology, Operations Management, or Supply Chain Management 1+ years of experience in a manufacturing or test environment Experience working with LEAN manufacturing with knowledge of LEAN principles Experience with improvement projects Experience using Aurora Scheduling Software Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Union: This is a union-represented position. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range Entry-Level: $56,100 - $75,900 Summary pay range Associate: $66,300-$89,700 Applications for this position will be accepted until Dec. 11, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Join our dynamic team in Huntsville, Alabama, as a Circuit Card Assembly Specialist and be at the forefront of cutting-edge defense manufacturing. We're looking for skilled professionals who are passionate about precision and innovation to help produce Boeing's Patriot Advanced Capability Center of Excellence (CoE) components - an integral part of the world's most advanced air defense system. Recently, the CoE, in association with the PAC-3 product, was honored as the 2025 "Coolest Thing Made in Alabama:" in the statewide Manufacturing Madness competition. Position Responsibilities: Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies as an individual or as a member of a cross-functional, high performance work team. Performs simple rework and modification to circuit card parts and assemblies per requirements. Uses and operates shop tools and equipment including measuring instruments and equipment including optics and lasers. Operates various types of shop equipment such as Surface Mount Technology (SMT), circuit board cleaning systems, conformal coat application equipment, Selective Solder or Wave Solder equipment, reflow ovens, screen printing equipment, plated through hole (PTH) equipment, Automated Optical Inspection (AOI), pick and place equipment. Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists. Documents results in accordance with applicable procedures. Collects and inputs data for statistical process control analysis. Performs CCA work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: CCA technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches. Performs CCA assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly. Performs assigned work using any electrical and CCA related electronic test instrument, test equipment, measurement tool, required to trouble shoot at the CCA component level. Documents CCA non-conformances down to component level. Performs, as required, approved CCA rework, modification, repairs and incorporation of changes per CCA technical documentation and formal direction to electrical, electronic and mechanical systems. Assists in defining, implementing, completing and monitoring the execution of the work scope. Devises, develops and assembles approved CCA shop aides and devices that may be required to adjust, test or maintain circuit card assemblies. Performs self-examination and inspection as certified and required. Makes recommendations for refinement to CCA equipment and integration processes by conducting studies and evaluations that result in product and process improvements. Analyzes CCA product, processes, test data, and rejection history to identify root cause for problems and assist with developing corrective action. Performs chemical cleaning, surface finishing, conformal coating, marking in accordance with specifications and procedures. Performs critical handling tasks and operates special electrical, electronic, mechanical and support equipment. Sets up and maintains CCA charts, logs, records and reports. Duties may include the handling of hazardous waste (if qualified). Maintains licenses, permits and certifications required to perform CCA work. Works under general supervision. This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. A final post-start U.S. Secret clearance is required. Basic Qualifications (Required Skills/Experience): Experience with electronic assembly in either a manufacturing or educational setting Must be willing to work any shift Preferred Qualifications (Desired Skills/Experience): Experience with circuit card and/or electronics manufacturing Experience performing soldering and electronics repair to the component level IPC-A-610 or J-Standard Certification Additional Information: This is an hourly position governed by the IAMAW 2766 Collective Bargaining agreement. The selected candidate must be able to work any shift based on seniority and work assignment. This site runs 3 shifts: A shift: Monday-Thursday 6:00am - 4:30pm B shift: Monday-Thursday 4:30pm - 3:00am C shift: Friday-Sunday 6:00am - 6:30pm Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Total Rewards: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $20.00 / hr. - $26.00 / hr. starting pay Applications for this position will be accepted until Jan. 05, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Join our dynamic team in Huntsville, Alabama, as a Circuit Card Assembly Specialist and be at the forefront of cutting-edge defense manufacturing. We're looking for skilled professionals who are passionate about precision and innovation to help produce Boeing's Patriot Advanced Capability Center of Excellence (CoE) components - an integral part of the world's most advanced air defense system. Recently, the CoE, in association with the PAC-3 product, was honored as the 2025 "Coolest Thing Made in Alabama:" in the statewide Manufacturing Madness competition. Position Responsibilities: Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies as an individual or as a member of a cross-functional, high performance work team. Performs simple rework and modification to circuit card parts and assemblies per requirements. Uses and operates shop tools and equipment including measuring instruments and equipment including optics and lasers. Operates various types of shop equipment such as Surface Mount Technology (SMT), circuit board cleaning systems, conformal coat application equipment, Selective Solder or Wave Solder equipment, reflow ovens, screen printing equipment, plated through hole (PTH) equipment, Automated Optical Inspection (AOI), pick and place equipment. Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists. Documents results in accordance with applicable procedures. Collects and inputs data for statistical process control analysis. Performs CCA work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: CCA technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches. Performs CCA assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly. Performs assigned work using any electrical and CCA related electronic test instrument, test equipment, measurement tool, required to trouble shoot at the CCA component level. Documents CCA non-conformances down to component level. Performs, as required, approved CCA rework, modification, repairs and incorporation of changes per CCA technical documentation and formal direction to electrical, electronic and mechanical systems. Assists in defining, implementing, completing and monitoring the execution of the work scope. Devises, develops and assembles approved CCA shop aides and devices that may be required to adjust, test or maintain circuit card assemblies. Performs self-examination and inspection as certified and required. Makes recommendations for refinement to CCA equipment and integration processes by conducting studies and evaluations that result in product and process improvements. Analyzes CCA product, processes, test data, and rejection history to identify root cause for problems and assist with developing corrective action. Performs chemical cleaning, surface finishing, conformal coating, marking in accordance with specifications and procedures. Performs critical handling tasks and operates special electrical, electronic, mechanical and support equipment. Sets up and maintains CCA charts, logs, records and reports. Duties may include the handling of hazardous waste (if qualified). Maintains licenses, permits and certifications required to perform CCA work. Works under general supervision. This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. A final post-start U.S. Secret clearance is required. Basic Qualifications (Required Skills/Experience): Experience with electronic assembly in either a manufacturing or educational setting Must be willing to work any shift Preferred Qualifications (Desired Skills/Experience): Experience with circuit card and/or electronics manufacturing Experience performing soldering and electronics repair to the component level IPC-A-610 or J-Standard Certification Additional Information: This is an hourly position governed by the IAMAW 2766 Collective Bargaining agreement. The selected candidate must be able to work any shift based on seniority and work assignment. This site runs 3 shifts: A shift: Monday-Thursday 6:00am - 4:30pm B shift: Monday-Thursday 4:30pm - 3:00am C shift: Friday-Sunday 6:00am - 6:30pm Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Total Rewards: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $20.00 / hr. - $26.00 / hr. starting pay Applications for this position will be accepted until Jan. 05, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
WHY JOIN CHOCTAW PREMIER SERVICES: Are you passionate about making a meaningful impact on the lives of Service Members and their families? Join Choctaw Premier Services (CPS) as a Transition Counselor and help guide Soldiers through one of the most important transitions of their lives. In this role, you will provide invaluable career counseling, facilitate workshops, and support military personnel as they prepare for life after service. If you are looking for a fulfilling position where you can use your expertise to support those who have served our country, we want you on our team. YOUR RESPONSIBILITIES: Individual Counseling & Support: Provide one-on-one career counseling, helping Soldiers develop individualized transition goals and strategies.Assist Service Members and their families in creating and refining their Individual Transition Plans (ITPs) and résumés for both federal and private sector opportunities. Workshops & Briefings: Coordinate and facilitate DOL Employment Workshops, VA Benefits Briefings, and additional transition-related sessions.Deliver comprehensive Transition Briefings to inform Soldiers of the available services and eligibility requirements for transition benefits. Pre-Separation Counseling & Outreach: Conduct pre-separation counseling sessions for Soldiers to ensure they are aware of all required services and resources.Lead regional outreach activities to promote available transition services and provide additional support for Soldiers in need. Program Improvement: Collect and analyze participant feedback to evaluate program effectiveness and identify areas for improvement.Ensure compliance with the Program Work Statement (PWS) and the instructions of the Contract Installation Manager (CIM). WHAT WE ARE LOOKING FOR: Education: Master's degree preferred in Training and Development, HR Management, Counseling, or a related field.Bachelor's degree accepted with additional experience in career counseling, education, or a related field. Experience: Minimum two (2) years of career counseling, education, or related experience.Two (2) years of experience with the Military lifestyle, either through personal or professional experience with Military personnel and their families, is highly desired.In-depth understanding of Military culture and Command structure is crucial.If non-military, at least four (4) years of counseling experience is required.Demonstrated experience in program evaluations and utilizing customer feedback to improve program effectiveness and impact; highly desired. Skills & Competencies: Ability to work independently while implementing personal experience and judgment to plan and accomplish goals, with a degree of creativity and latitude.Strong verbal and written communication skills, particularly in needs assessment and individual/small group training.Familiarity with standard concepts, practices, and procedures within the field of career counseling and transition services.Curriculum development experience is a plus. WORK CONDITIONS: Work Environment: Fast-paced, on-site work environment focused on meeting performance goals for transitioning military personnel.Role involves interacting with service members and employers, requiring a high level of engagement and adaptability. Schedule: Full-time position, typically Monday through Friday, with occasional extended hours based on project requirements. Physical Requirements: Primarily office-based with moderate desk work, computer use, and occasional physical tasks.Ability to sit for extended periods and lift materials up to twenty (20) lbs. may be required. WHAT YOU WILL LOVE ABOUT THIS POSITION: Meaningful Impact: Play a direct role in helping service members transition successfully to civilian careers. Dynamic Work Environment: Enjoy a fast-paced, engaging role, with the opportunity to meet new people and develop professional relationships. Collaborative Culture: Work alongside a team of dedicated professionals, committed to supporting the military community. Career Development: Access to opportunities for growth and development in a leading federal contracting company. JOIN OUR MISSION: At CPS, we are committed to supporting those who have served our country. By joining our team, you will play a crucial role in helping Service Members and their families navigate their transition to civilian life. We value your expertise, provide opportunities for growth, and foster a collaborative environment where your work truly makes a difference. If you are ready to be part of a mission that matters, apply today and help us empower the next generation of civilian leaders. EEO/AAP STATEMENT: We acknowledge and honor the fundamental value and dignity of all individuals. We pledge ourselves to craft and maintain an environment that respects diverse traditions, heritages, and experiences. Choctaw is an Equal Employment Opportunity and Affirmative Action Employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions) sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. DISCLAIMER: The above-noted job advertisement is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the applicant a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of the positions. PI58c578a82a7a-7901
12/08/2025
Full time
WHY JOIN CHOCTAW PREMIER SERVICES: Are you passionate about making a meaningful impact on the lives of Service Members and their families? Join Choctaw Premier Services (CPS) as a Transition Counselor and help guide Soldiers through one of the most important transitions of their lives. In this role, you will provide invaluable career counseling, facilitate workshops, and support military personnel as they prepare for life after service. If you are looking for a fulfilling position where you can use your expertise to support those who have served our country, we want you on our team. YOUR RESPONSIBILITIES: Individual Counseling & Support: Provide one-on-one career counseling, helping Soldiers develop individualized transition goals and strategies.Assist Service Members and their families in creating and refining their Individual Transition Plans (ITPs) and résumés for both federal and private sector opportunities. Workshops & Briefings: Coordinate and facilitate DOL Employment Workshops, VA Benefits Briefings, and additional transition-related sessions.Deliver comprehensive Transition Briefings to inform Soldiers of the available services and eligibility requirements for transition benefits. Pre-Separation Counseling & Outreach: Conduct pre-separation counseling sessions for Soldiers to ensure they are aware of all required services and resources.Lead regional outreach activities to promote available transition services and provide additional support for Soldiers in need. Program Improvement: Collect and analyze participant feedback to evaluate program effectiveness and identify areas for improvement.Ensure compliance with the Program Work Statement (PWS) and the instructions of the Contract Installation Manager (CIM). WHAT WE ARE LOOKING FOR: Education: Master's degree preferred in Training and Development, HR Management, Counseling, or a related field.Bachelor's degree accepted with additional experience in career counseling, education, or a related field. Experience: Minimum two (2) years of career counseling, education, or related experience.Two (2) years of experience with the Military lifestyle, either through personal or professional experience with Military personnel and their families, is highly desired.In-depth understanding of Military culture and Command structure is crucial.If non-military, at least four (4) years of counseling experience is required.Demonstrated experience in program evaluations and utilizing customer feedback to improve program effectiveness and impact; highly desired. Skills & Competencies: Ability to work independently while implementing personal experience and judgment to plan and accomplish goals, with a degree of creativity and latitude.Strong verbal and written communication skills, particularly in needs assessment and individual/small group training.Familiarity with standard concepts, practices, and procedures within the field of career counseling and transition services.Curriculum development experience is a plus. WORK CONDITIONS: Work Environment: Fast-paced, on-site work environment focused on meeting performance goals for transitioning military personnel.Role involves interacting with service members and employers, requiring a high level of engagement and adaptability. Schedule: Full-time position, typically Monday through Friday, with occasional extended hours based on project requirements. Physical Requirements: Primarily office-based with moderate desk work, computer use, and occasional physical tasks.Ability to sit for extended periods and lift materials up to twenty (20) lbs. may be required. WHAT YOU WILL LOVE ABOUT THIS POSITION: Meaningful Impact: Play a direct role in helping service members transition successfully to civilian careers. Dynamic Work Environment: Enjoy a fast-paced, engaging role, with the opportunity to meet new people and develop professional relationships. Collaborative Culture: Work alongside a team of dedicated professionals, committed to supporting the military community. Career Development: Access to opportunities for growth and development in a leading federal contracting company. JOIN OUR MISSION: At CPS, we are committed to supporting those who have served our country. By joining our team, you will play a crucial role in helping Service Members and their families navigate their transition to civilian life. We value your expertise, provide opportunities for growth, and foster a collaborative environment where your work truly makes a difference. If you are ready to be part of a mission that matters, apply today and help us empower the next generation of civilian leaders. EEO/AAP STATEMENT: We acknowledge and honor the fundamental value and dignity of all individuals. We pledge ourselves to craft and maintain an environment that respects diverse traditions, heritages, and experiences. Choctaw is an Equal Employment Opportunity and Affirmative Action Employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions) sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. DISCLAIMER: The above-noted job advertisement is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the applicant a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of the positions. PI58c578a82a7a-7901
Gulfstream Aerospace Corporation
Saint Louis, Missouri
Senior Interior Installation Technician in GAC St. Louis Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Seeking skilled experienced in repairing scratches, gouges, and finish touch-ups on high-value wood surfaces. Candidate should have a strong eye for color and grain matching, and the ability to make repairs that blend with the surrounding material. The compensation range for this role is $31.06 - $36.24 per hour. Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location. Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes: Medical, prescription, dental and vision coverage Life and disability insurance Retirement savings plan Employee assistance plan Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. Education and Experience Requirements High School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians. Job Description Principle Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required. Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned.Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English. Additional Information Requisition Number: 228867 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 12/05/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information Site Utilities Contacts Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
12/08/2025
Full time
Senior Interior Installation Technician in GAC St. Louis Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Seeking skilled experienced in repairing scratches, gouges, and finish touch-ups on high-value wood surfaces. Candidate should have a strong eye for color and grain matching, and the ability to make repairs that blend with the surrounding material. The compensation range for this role is $31.06 - $36.24 per hour. Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location. Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes: Medical, prescription, dental and vision coverage Life and disability insurance Retirement savings plan Employee assistance plan Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. Education and Experience Requirements High School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians. Job Description Principle Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required. Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned.Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English. Additional Information Requisition Number: 228867 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 12/05/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information Site Utilities Contacts Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Description: Roxtec Inc. ( ) is the global leader in modular-based cable and pipe sealing solutions. Founded in 1990, we help protect critical infrastructure across industries by delivering innovative systems that ensure safety, reliability, and compliance. With a strong focus on engineering and design, Roxtec has grown rapidly-averaging 30% annual growth over the past decade-and continues to set the standard for sealing performance worldwide. Are you a driven, ambitious professional with a passion for digital solutions and a knack for building strategic relationships? Roxtec is seeking a Business Development Representative to lead national growth initiatives across key industries-manufacturing, energy, defense, marine, and transportation. You'll spearhead sales of our cutting-edge Roxtec Transit Build (RTB) and Roxtec Transit Operate (RTO) services, delivering long-term cable and pipe transit solutions for both construction and asset management. Ideal candidates bring experience in SaaS or digital solution sales , understand the construction landscape for energy, civil, and tech infrastructure , and thrive in both independent and team environments. If you're ready to shape market strategy, engage top-tier clients, and drive measurable impact-this is your opportunity to lead with purpose and innovation. Job Summary The Business Development Representative will be responsible for leading all aspects of business development strategy for multiple industry verticals. This position will play a key role in future business generation by identifying and developing new business opportunities that will focus on increasing our market share with both new and existing customers. Essential Job Functions Identify growth markets, research business requirements, and develop and execute a comprehensive strategic plan to capture market share with newly identified and existing customers Organize and execute a multi-faceted sales plan to effectively make direct contact with prospects Build effective and collaborative relationships with key decision-makers within the prospective organizations Work with national marketing resources to develop effective, targeted go-to-market plans for different sub-segments In partnership with marketing, execute events and other outreach campaigns in order to identify and engage targets, and build the Roxtec brand in the marketplace Understand the short- and long-term needs and challenges of prospective accounts and how Roxtec's solutions can address those issues. Participate with a team of peers, and other sales and marketing professionals in the pursuit process that moves prospects through all stages of the sales process. Develop and negotiate competitive pricing strategies Effectively manage all opportunities to ensure they are properly pushed through the sales pipeline Collaborate with leadership to develop business development targets, goals and strategies Establish strong networking relationships with key decision makers at multiple levels of the customers, industry organizations, and key business partners Serve as a consultant to leaders, project participants, and customers Build a sales pipeline sufficient to capture annual top line growth target Develop and maintain awareness of trends within the industry, attending sales, trade, and product learning meetings Define sales potential, prepare budgets, maintain sales tracking and other required administrative reporting Provide technical presentations and product installation training to a wide range of audiences Utilize CRM software as the primary tool to manage day-to-day sales activities (including pre-call plans, detailed contact management, quotations, communications/email tracking, project management, etc.) Work cooperatively with peers and other internal departments, keeping key individuals informed to assure positive customer relations are maintained Maintain awareness of Roxtec's internal policy and the Roxtec Core Values in regard to the daily work Requirements: Must be willing to travel domestically and internationally up to 60% Knowledgeable and proficient in the Microsoft Suite of products (Excel, Word, PowerPoint, Outlook) Adhere to the principles of Value Added Selling and Total Cost of Ownership (TCO) Strategies Proficient in time and travel management Possess strong negotiation and presentation skills Exceptional experience leading complex sales processes that involve multiple team members and decision makers Strong communication, presentation, analytical and organizational skills Experience and involvement with industry associations and/or non-profit groups is preferred Ability to work independently and within a team environment Education and Experience Bachelor's degree in business or related field or comparable work experience 3 years of experience in B2B sales; technical and/or project sales preferred Physical Requirements Required to wear PPE as needed This is designated as a safety sensitive position Physical Demands (reasonable accommodations may be made, if necessary): Physical Abilities Stand - Frequently Walk - Frequently Sit - Continuously Climb - N/A Crawl - N/A Squat or Kneel - Occasionally Bend - Occasionally Fine Manipulation - Occasionally Reach Outward - Occasionally Reach Above Shoulder - Occasionally Work in confined spaces - Occasionally Travel by car, air, or other means of public transportation - Frequently Lift /Carry 10 lbs or less - Occasionally 11-20 lbs - Occasionally 21-50 lbs - Occasionally Push / Pull 10 lbs or less - Occasionally 10-20 lbs - Occasionally 20-50 lbs - Occasionally N/A (Not Applicable) - Activity is not applicable to this occupation Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs/day) Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs/day) Continuously - Occupation requires this activity more that 67% of the time Why Roxtec? Because Your Work-and Workplace-Matter. Benefits In addition to our competitive compensation package, Roxtec is proud to offer a comprehensive suite of benefits designed to support the well-being and professional growth of our employees: 401(k) Plan with Company Contribution : Enjoy the advantage of immediate vesting. Comprehensive Health Coverage : Inclusive of Medical, Dental, and Vision Insurance. Income Protection : Benefit from Short-Term Disability (STD) and Long-Term Disability (LTD) coverage. Life Insurance : Company-paid coverage to provide added peace of mind. Paid Time Off : Includes holidays, vacation, personal days, and wellness hours, tailored to your position. Career Development Opportunities : We support your professional growth and advancement. Education and Tuition Reimbursement : Programs available to further your education. Flexible or Hybrid Schedules : Options available based on your position. Climate-Controlled Workspaces : Our warehouse, fabrication, and shop areas are climate-controlled to ensure a comfortable and safe environment year-round. Exciting Bonus Opportunities : This position is eligible for a bonus, calculated based on individual and company performance. We are committed to fostering a supportive and dynamic work environment that promotes both personal and professional success. Join us at Roxtec and be part of a team that values your contributions and invests in your future! Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Roxtec is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, military/veteran status or other characteristics protected by law. PI6c716fbd141f-1765
12/08/2025
Full time
Description: Roxtec Inc. ( ) is the global leader in modular-based cable and pipe sealing solutions. Founded in 1990, we help protect critical infrastructure across industries by delivering innovative systems that ensure safety, reliability, and compliance. With a strong focus on engineering and design, Roxtec has grown rapidly-averaging 30% annual growth over the past decade-and continues to set the standard for sealing performance worldwide. Are you a driven, ambitious professional with a passion for digital solutions and a knack for building strategic relationships? Roxtec is seeking a Business Development Representative to lead national growth initiatives across key industries-manufacturing, energy, defense, marine, and transportation. You'll spearhead sales of our cutting-edge Roxtec Transit Build (RTB) and Roxtec Transit Operate (RTO) services, delivering long-term cable and pipe transit solutions for both construction and asset management. Ideal candidates bring experience in SaaS or digital solution sales , understand the construction landscape for energy, civil, and tech infrastructure , and thrive in both independent and team environments. If you're ready to shape market strategy, engage top-tier clients, and drive measurable impact-this is your opportunity to lead with purpose and innovation. Job Summary The Business Development Representative will be responsible for leading all aspects of business development strategy for multiple industry verticals. This position will play a key role in future business generation by identifying and developing new business opportunities that will focus on increasing our market share with both new and existing customers. Essential Job Functions Identify growth markets, research business requirements, and develop and execute a comprehensive strategic plan to capture market share with newly identified and existing customers Organize and execute a multi-faceted sales plan to effectively make direct contact with prospects Build effective and collaborative relationships with key decision-makers within the prospective organizations Work with national marketing resources to develop effective, targeted go-to-market plans for different sub-segments In partnership with marketing, execute events and other outreach campaigns in order to identify and engage targets, and build the Roxtec brand in the marketplace Understand the short- and long-term needs and challenges of prospective accounts and how Roxtec's solutions can address those issues. Participate with a team of peers, and other sales and marketing professionals in the pursuit process that moves prospects through all stages of the sales process. Develop and negotiate competitive pricing strategies Effectively manage all opportunities to ensure they are properly pushed through the sales pipeline Collaborate with leadership to develop business development targets, goals and strategies Establish strong networking relationships with key decision makers at multiple levels of the customers, industry organizations, and key business partners Serve as a consultant to leaders, project participants, and customers Build a sales pipeline sufficient to capture annual top line growth target Develop and maintain awareness of trends within the industry, attending sales, trade, and product learning meetings Define sales potential, prepare budgets, maintain sales tracking and other required administrative reporting Provide technical presentations and product installation training to a wide range of audiences Utilize CRM software as the primary tool to manage day-to-day sales activities (including pre-call plans, detailed contact management, quotations, communications/email tracking, project management, etc.) Work cooperatively with peers and other internal departments, keeping key individuals informed to assure positive customer relations are maintained Maintain awareness of Roxtec's internal policy and the Roxtec Core Values in regard to the daily work Requirements: Must be willing to travel domestically and internationally up to 60% Knowledgeable and proficient in the Microsoft Suite of products (Excel, Word, PowerPoint, Outlook) Adhere to the principles of Value Added Selling and Total Cost of Ownership (TCO) Strategies Proficient in time and travel management Possess strong negotiation and presentation skills Exceptional experience leading complex sales processes that involve multiple team members and decision makers Strong communication, presentation, analytical and organizational skills Experience and involvement with industry associations and/or non-profit groups is preferred Ability to work independently and within a team environment Education and Experience Bachelor's degree in business or related field or comparable work experience 3 years of experience in B2B sales; technical and/or project sales preferred Physical Requirements Required to wear PPE as needed This is designated as a safety sensitive position Physical Demands (reasonable accommodations may be made, if necessary): Physical Abilities Stand - Frequently Walk - Frequently Sit - Continuously Climb - N/A Crawl - N/A Squat or Kneel - Occasionally Bend - Occasionally Fine Manipulation - Occasionally Reach Outward - Occasionally Reach Above Shoulder - Occasionally Work in confined spaces - Occasionally Travel by car, air, or other means of public transportation - Frequently Lift /Carry 10 lbs or less - Occasionally 11-20 lbs - Occasionally 21-50 lbs - Occasionally Push / Pull 10 lbs or less - Occasionally 10-20 lbs - Occasionally 20-50 lbs - Occasionally N/A (Not Applicable) - Activity is not applicable to this occupation Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs/day) Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs/day) Continuously - Occupation requires this activity more that 67% of the time Why Roxtec? Because Your Work-and Workplace-Matter. Benefits In addition to our competitive compensation package, Roxtec is proud to offer a comprehensive suite of benefits designed to support the well-being and professional growth of our employees: 401(k) Plan with Company Contribution : Enjoy the advantage of immediate vesting. Comprehensive Health Coverage : Inclusive of Medical, Dental, and Vision Insurance. Income Protection : Benefit from Short-Term Disability (STD) and Long-Term Disability (LTD) coverage. Life Insurance : Company-paid coverage to provide added peace of mind. Paid Time Off : Includes holidays, vacation, personal days, and wellness hours, tailored to your position. Career Development Opportunities : We support your professional growth and advancement. Education and Tuition Reimbursement : Programs available to further your education. Flexible or Hybrid Schedules : Options available based on your position. Climate-Controlled Workspaces : Our warehouse, fabrication, and shop areas are climate-controlled to ensure a comfortable and safe environment year-round. Exciting Bonus Opportunities : This position is eligible for a bonus, calculated based on individual and company performance. We are committed to fostering a supportive and dynamic work environment that promotes both personal and professional success. Join us at Roxtec and be part of a team that values your contributions and invests in your future! Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Roxtec is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, military/veteran status or other characteristics protected by law. PI6c716fbd141f-1765
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines (BCA), ETC (Electrical Technical Center) Electrical Design organization has an exciting opportunity for a Wiring Design and Installation Engineer (Experienced or Senior) in Everett, WA and Renton, WA to help us define the future of commercial aerospace with innovative ideas that advance or culture of safety and quality that our customers, the flying public expect. Our teams are currently hiring for a broad range of experience levels including; Experienced and Senior Wiring Design and Installation Engineers. Position Responsibilities: You will be responsible for developing and maintaining electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas) for our diverse portfolio of advanced Commercial Aircraft. Our greatest current need involves developing and maintaining critical electrical cable/wire harness installation, detail and assembly designs. This includes defining the physical routing layout of wire routing throughout the airplane. You must take into account such requirements as wire supports and brackets, separation to maintain physical and functional safety, proper parts selection, as well as environmental impacts on the many parts that make up the system of wire harnesses. All while ensuring that Safety and Quality are the number 1 priority. You will also develop and analyze engineering design disposition on discrepancies (e.g., rejection tags, production action requests and shop revision requests). This often involves working closely and collaborating with our partners on the factory floor to ensure our designs can be built efficiently and safely. You will follow and look for improvements to documented processes, specifications and procedures that support safe and quality design and manufacture of electrical commodities. You will develop basic statements of work. Also, participate in technical reviews of supplier capabilities to facilitate source selection. You will analyze functional and physical requirements to assure the development of integrated designs and system architecture. Actively supporting critical analysis and design reviews. You will work with and under general supervision of a lead engineer and an experienced mentor to enhance both your technical learning and career growth. Work Authorization: The position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills/Experience): Bachelor's, Master's or Doctorate of Science degree from an ABET accredited course of study in engineering and ABET accredited college / university. 3+ years of experience with wire harness, electrical and/or mechanical design. Preferred Qualifications (Desired Skills/Experience): 5+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience in Computer aided design (CAD) tools are a plus. Experience working in a cross functional team environment and have good verbal and written communication skills. Knowledge of CATIA V5. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union: This is a union-represented position. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Experienced (Level 3): $104,550 - $141,450 Senior (Level 4): $128,350 - $173,650 Additional Information: Formal training is available as part of the job. All information provided will be checked and may be verified. Applications for this position will be accepted until Dec. 15, 2025 Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines (BCA), ETC (Electrical Technical Center) Electrical Design organization has an exciting opportunity for a Wiring Design and Installation Engineer (Experienced or Senior) in Everett, WA and Renton, WA to help us define the future of commercial aerospace with innovative ideas that advance or culture of safety and quality that our customers, the flying public expect. Our teams are currently hiring for a broad range of experience levels including; Experienced and Senior Wiring Design and Installation Engineers. Position Responsibilities: You will be responsible for developing and maintaining electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas) for our diverse portfolio of advanced Commercial Aircraft. Our greatest current need involves developing and maintaining critical electrical cable/wire harness installation, detail and assembly designs. This includes defining the physical routing layout of wire routing throughout the airplane. You must take into account such requirements as wire supports and brackets, separation to maintain physical and functional safety, proper parts selection, as well as environmental impacts on the many parts that make up the system of wire harnesses. All while ensuring that Safety and Quality are the number 1 priority. You will also develop and analyze engineering design disposition on discrepancies (e.g., rejection tags, production action requests and shop revision requests). This often involves working closely and collaborating with our partners on the factory floor to ensure our designs can be built efficiently and safely. You will follow and look for improvements to documented processes, specifications and procedures that support safe and quality design and manufacture of electrical commodities. You will develop basic statements of work. Also, participate in technical reviews of supplier capabilities to facilitate source selection. You will analyze functional and physical requirements to assure the development of integrated designs and system architecture. Actively supporting critical analysis and design reviews. You will work with and under general supervision of a lead engineer and an experienced mentor to enhance both your technical learning and career growth. Work Authorization: The position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills/Experience): Bachelor's, Master's or Doctorate of Science degree from an ABET accredited course of study in engineering and ABET accredited college / university. 3+ years of experience with wire harness, electrical and/or mechanical design. Preferred Qualifications (Desired Skills/Experience): 5+ years of related work experience or an equivalent combination of education and experience. 3+ years of experience in Computer aided design (CAD) tools are a plus. Experience working in a cross functional team environment and have good verbal and written communication skills. Knowledge of CATIA V5. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union: This is a union-represented position. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Experienced (Level 3): $104,550 - $141,450 Senior (Level 4): $128,350 - $173,650 Additional Information: Formal training is available as part of the job. All information provided will be checked and may be verified. Applications for this position will be accepted until Dec. 15, 2025 Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
University of New Mexico - Hospitals
Albuquerque, New Mexico
Sign-On Bonus Available Relocation Assistance Available Additional $6.00/hr. Safety Incentive Pay Minimum Offer $ 34.32/hr. Maximum Offer $ 46.82/hr. Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. Department: MDC - Medical FTE: 1.00 Full Time Shift: Days Position Summary: Function as unit educator, master teacher, master preceptor and facilitates evidenced-based research into specialized areas of nursing. Utilize the expertise of a practitioner to incorporate nursing processes into the plan of care for a specialized group of patients. Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit. Ensure adherence to Hospitals and departmental policies, procedures and guidelines. Patient care assignment may include neonate, pediatric, adolescent, adult and geriatric age groups. Detailed responsibilities: LEAD - Provide educational leadership to enhance specialized patient care within clinical protocols INITIATE - Initiate unit-based strategies for developing clinical skills through the master clinician, master preceptor model PERFORM - Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit PLAN - Develop patient plans of care incorporating evidenced-based research and national standards CONSULTS - Consult with and serve as a clinical resource for the multidisciplinary team to ensure quality patient care EDUCATE - Educate appropriate staff in the use of new equipment, supplies, and instruments for their service; coordinates in-service training/workshops for appropriate staff ASSIST - Assist patient and caregivers with educational needs, problem solving, and health management aspects across the continuum of care COLLABORATE - Collaborate with the Clinical Educator as well as the Clinical Nurse Specialist, Specialty RN, or Unit Director to plan and implement pertinent curricula MONITOR - Monitor trends and implement educational strategies to ensure quality standards and parameters are achieved PATIENT CARE - Deliver safe direct care to an assigned group of patients, providing specialized patient care within nursing protocols and assisting the admission, transfer and discharge process performing all RN nursing duties DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings PATIENT CARE - Write treatment plans; coordinate patient drug and procedure activities; administer medication and treatment; provide and coordinate nursing care of assigned patients; may facilitate group therapy and/or education sessions Qualifications Education: Essential: Bachelor's Degree Nonessential: Master's Degree Education specialization: Essential: BSN or MSN Nonessential: Nursing Experience: Essential: 18 months directly related experience Nonessential: Bilingual English, Spanish, Keres, Tewa, Tiwa, Towa, Zuni, or Navajo 3 years directly related experience Credentials: Essential: CPR for Healthcare/BLS Prov or Prof Rescuers w/in 30 days RN in NM or as allowed by reciprocal agreement by NM Instructor in Unit-Required Certifications w/in 90 Days Nonessential: Current Instructor in BLS, ACLS, NRP or other instruct cert Credential equivalent experience: Essential: Instructor in Unit-Required Certifications or obtained within one year of position (BLS, ILS, NRP, PALS, ACLS, TNCC, etc) Physical Conditions: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Working conditions: Essential: Sig Hazard: Chemicals, Bio Hazardous Materials req PPE Tuberculosis testing is completed upon hire and additionally as required Sig Haz: Physical risk/injuries due to combative patients Sub to work in close proximity to incarcerated individuals Must obtain and maintain MDC security clearance as required condition of employment Department: Registered Nurse
12/08/2025
Full time
Sign-On Bonus Available Relocation Assistance Available Additional $6.00/hr. Safety Incentive Pay Minimum Offer $ 34.32/hr. Maximum Offer $ 46.82/hr. Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. Department: MDC - Medical FTE: 1.00 Full Time Shift: Days Position Summary: Function as unit educator, master teacher, master preceptor and facilitates evidenced-based research into specialized areas of nursing. Utilize the expertise of a practitioner to incorporate nursing processes into the plan of care for a specialized group of patients. Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit. Ensure adherence to Hospitals and departmental policies, procedures and guidelines. Patient care assignment may include neonate, pediatric, adolescent, adult and geriatric age groups. Detailed responsibilities: LEAD - Provide educational leadership to enhance specialized patient care within clinical protocols INITIATE - Initiate unit-based strategies for developing clinical skills through the master clinician, master preceptor model PERFORM - Perform as a unit educator while maintaining clinical skills by performing as a clinical instructor for students from the CON on home unit and/or assisting in staffing on unit PLAN - Develop patient plans of care incorporating evidenced-based research and national standards CONSULTS - Consult with and serve as a clinical resource for the multidisciplinary team to ensure quality patient care EDUCATE - Educate appropriate staff in the use of new equipment, supplies, and instruments for their service; coordinates in-service training/workshops for appropriate staff ASSIST - Assist patient and caregivers with educational needs, problem solving, and health management aspects across the continuum of care COLLABORATE - Collaborate with the Clinical Educator as well as the Clinical Nurse Specialist, Specialty RN, or Unit Director to plan and implement pertinent curricula MONITOR - Monitor trends and implement educational strategies to ensure quality standards and parameters are achieved PATIENT CARE - Deliver safe direct care to an assigned group of patients, providing specialized patient care within nursing protocols and assisting the admission, transfer and discharge process performing all RN nursing duties DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings PATIENT CARE - Write treatment plans; coordinate patient drug and procedure activities; administer medication and treatment; provide and coordinate nursing care of assigned patients; may facilitate group therapy and/or education sessions Qualifications Education: Essential: Bachelor's Degree Nonessential: Master's Degree Education specialization: Essential: BSN or MSN Nonessential: Nursing Experience: Essential: 18 months directly related experience Nonessential: Bilingual English, Spanish, Keres, Tewa, Tiwa, Towa, Zuni, or Navajo 3 years directly related experience Credentials: Essential: CPR for Healthcare/BLS Prov or Prof Rescuers w/in 30 days RN in NM or as allowed by reciprocal agreement by NM Instructor in Unit-Required Certifications w/in 90 Days Nonessential: Current Instructor in BLS, ACLS, NRP or other instruct cert Credential equivalent experience: Essential: Instructor in Unit-Required Certifications or obtained within one year of position (BLS, ILS, NRP, PALS, ACLS, TNCC, etc) Physical Conditions: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Working conditions: Essential: Sig Hazard: Chemicals, Bio Hazardous Materials req PPE Tuberculosis testing is completed upon hire and additionally as required Sig Haz: Physical risk/injuries due to combative patients Sub to work in close proximity to incarcerated individuals Must obtain and maintain MDC security clearance as required condition of employment Department: Registered Nurse
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Global Services (BGS) is currently hiring for a Mid OR Senior Level Customer Technical Training Specialists to support the Training Team in Seattle, WA Position Responsibilities (Level Dependent): Independently conducts customer training in broad subject areas using the approved medium to satisfy customer training requirements. Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives, and design. Develops, conducts, and evaluates effectiveness of technical training. Uses specialized software to research, configure, maintain, update, and develop new and existing media and materials. Travels for work up to 25% of the time. Ability to adjust shift. This position is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. Works under general supervision. May be asked to support other programs or perform other duties as needed. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. This position cannot be sponsored. Basic Qualifications (Required Skills/Experience): Experience interpreting commercial technical data including drawings, maintenance, and operations manuals. Experience conducting technical training and/or performing instructional system development. 5+ years' experience in aircraft maintenance and modification (This is time you were the technician physically working on the airplane with tools in hand). Capable of traveling 25% of the time. Preferred Qualifications (Desired Skills/Experience): 9+ years' experience or an equivalent combination of education and experience. Licensed Aircraft Mechanic. Associate's degree or higher. 2+ years' experience conducting technical training and/or performing instructional system development. Experience maintaining large complex commercial aircraft and have provided instruction on the same. Typical Education & Experience: Mid-Level: Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience, 9 years' related work experience, etc. Senior/Lead level: Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience, 13 years' related work experience, etc.) Relocation: This position does include relocation benefits for those who reside outside of the Seattle area by 50+ miles from their current commute. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. General: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level Summary Pay Range: $92,700 - $113,300 Lead-Level Summary Pay Range: $115,200 - $140,800 Applications for this position will be accepted until Dec. 17, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Global Services (BGS) is currently hiring for a Mid OR Senior Level Customer Technical Training Specialists to support the Training Team in Seattle, WA Position Responsibilities (Level Dependent): Independently conducts customer training in broad subject areas using the approved medium to satisfy customer training requirements. Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives, and design. Develops, conducts, and evaluates effectiveness of technical training. Uses specialized software to research, configure, maintain, update, and develop new and existing media and materials. Travels for work up to 25% of the time. Ability to adjust shift. This position is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. Works under general supervision. May be asked to support other programs or perform other duties as needed. This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. This position cannot be sponsored. Basic Qualifications (Required Skills/Experience): Experience interpreting commercial technical data including drawings, maintenance, and operations manuals. Experience conducting technical training and/or performing instructional system development. 5+ years' experience in aircraft maintenance and modification (This is time you were the technician physically working on the airplane with tools in hand). Capable of traveling 25% of the time. Preferred Qualifications (Desired Skills/Experience): 9+ years' experience or an equivalent combination of education and experience. Licensed Aircraft Mechanic. Associate's degree or higher. 2+ years' experience conducting technical training and/or performing instructional system development. Experience maintaining large complex commercial aircraft and have provided instruction on the same. Typical Education & Experience: Mid-Level: Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience, 9 years' related work experience, etc. Senior/Lead level: Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience, 13 years' related work experience, etc.) Relocation: This position does include relocation benefits for those who reside outside of the Seattle area by 50+ miles from their current commute. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. General: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level Summary Pay Range: $92,700 - $113,300 Lead-Level Summary Pay Range: $115,200 - $140,800 Applications for this position will be accepted until Dec. 17, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
ESSENTIAL FUNCTIONS Support the development of structural design for low- to medium-complexity modular steel buildings. Prepare structural 3D models, perform static and dynamic calculations, and generate technical documentation such as workshop drawings, lifting and anchoring layouts, and specifications. Apply international, national, and internal standards, ensuring that all designs are safe, compliant, and cost-effective. Integrate good engineering practices into every stage of the design process. Actively participate in project kick-off and coordination meetings, and engage with cross-functional teams including architectural, electrical, mechanical, manufacturing, and site engineers to ensure a cohesive project execution. Support the review and technical approval of workshop documentation and supplier RFQs. Specify materials, services, and necessary certifications for project execution. Provide technical support during fabrication and assembly. Collaborate with site managers, manufacturing, quality control, and commissioning engineers to resolve structural issues and ensure safe and efficient implementation. QUALIFICATIONS Bachelor's Degree in Mechanical or Structural Engineering or acceptable experience Professional engineering (PE) License - optional Minimum 5 years of mechanical/structural engineering experience Proficiency in Tekla, Revit, AutoCAD or Creo, SCIA Engineer, anchoring design tools, and MS Office Attention to detail, analytical thinking, creativity, problem-solving, organization, flexibility, and strong team collaboration Experience reading and interpreting construction drawings and equipment specifications, customer specifications Knowledge and understanding of local and national building codes Must have the ability to research new designs, technologies and construction methods of data center equipment and facilities TRAVEL REQUIREMENTS 15 - 25% Domestic and International travel required The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8.0 billion in sales, a strong customer base and global reach in nearly 130 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to . If you are interested in applying or learning more about this role, please visit the company's career page located on Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
12/08/2025
Full time
ESSENTIAL FUNCTIONS Support the development of structural design for low- to medium-complexity modular steel buildings. Prepare structural 3D models, perform static and dynamic calculations, and generate technical documentation such as workshop drawings, lifting and anchoring layouts, and specifications. Apply international, national, and internal standards, ensuring that all designs are safe, compliant, and cost-effective. Integrate good engineering practices into every stage of the design process. Actively participate in project kick-off and coordination meetings, and engage with cross-functional teams including architectural, electrical, mechanical, manufacturing, and site engineers to ensure a cohesive project execution. Support the review and technical approval of workshop documentation and supplier RFQs. Specify materials, services, and necessary certifications for project execution. Provide technical support during fabrication and assembly. Collaborate with site managers, manufacturing, quality control, and commissioning engineers to resolve structural issues and ensure safe and efficient implementation. QUALIFICATIONS Bachelor's Degree in Mechanical or Structural Engineering or acceptable experience Professional engineering (PE) License - optional Minimum 5 years of mechanical/structural engineering experience Proficiency in Tekla, Revit, AutoCAD or Creo, SCIA Engineer, anchoring design tools, and MS Office Attention to detail, analytical thinking, creativity, problem-solving, organization, flexibility, and strong team collaboration Experience reading and interpreting construction drawings and equipment specifications, customer specifications Knowledge and understanding of local and national building codes Must have the ability to research new designs, technologies and construction methods of data center equipment and facilities TRAVEL REQUIREMENTS 15 - 25% Domestic and International travel required The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8.0 billion in sales, a strong customer base and global reach in nearly 130 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to . If you are interested in applying or learning more about this role, please visit the company's career page located on Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
Salary Range: Salary commensurate with experience and qualifications About SMU SMU's more than 12,000 diverse, high-achieving students come from all 50 states and over 80 countries to take advantage of the University's small classes, meaningful research opportunities, leadership development, community service, international study and innovative programs. SMU serves approximately 7,000 undergraduates and 5,000 graduate students through eight degree-granting schools: Dedman College of Humanities and Sciences, Cox School of Business, Lyle School of Engineering, Meadows School of the Arts, Simmons School of Education and Human Development, Dedman School of Law, Perkins School of Theology and Moody School of Graduate and Advanced Studies. SMU is data driven, and its powerful supercomputing ecosystem - paired with entrepreneurial drive - creates an unrivaled environment for the University to deliver research excellence. Now in its second century of achievement, SMU is recognized for the ways it supports students, faculty and alumni as they become ethical, enterprising leaders in their professions and communities. SMU's relationship with Dallas - the dynamic center of one of the nation's fastest-growing regions - offers unique learning, research, social and career opportunities that provide a launch pad for global impact. SMU is nonsectarian in its teaching and committed to academic freedom and open inquiry. About the Position: This role is an on-campus, in-person position. Job Summary: The Director of Student Account Services (SAS) is an integral part of the leadership of Student Financial Services. This role has the responsibility of setting strategic directions, policies, and procedures for the area. Reporting to the AVP of Student Financial Services, the Director is responsible for supervision of the Student Account Services staff and will create an environment that is compliance oriented, customer service focused, and accountable for specific outcomes related to the administration and delivery of financial support and collections programs. This role must exude strength on both a technical and interpersonal level with a results-driven mindset. This ability will align campus culture with a student-focused environment where staff are passionate about their roles, connected to SMU goals, work collaboratively, and understand their purpose to create a positive student experience, while managing tuition revenue recovery. Essential Functions: Manage a complex caseload with competing deadlines; lead a talented team through large-scale projects, and mentor team to communicate effectively to students, campus partners, and team members. Maintain a subject-matter expert level of knowledge on managing a significant student accounts services operation that is student-centered. Direct student account projects, caseloads and workflow for staff. Develop effective working relationships across department and division boundaries to ensure that projects and initiatives are successful. Use technology and data informed strategies to streamline processes across teams to support access and retention strategies for students from various backgrounds. Ability to explain complex details about the student account and a wide range of business processes. Leads professional, comprehensive, efficient and courteous customer service, post payments, removal of student account holds, manage payment plans, loan advisement, and process, analyze charges and payments, verify financial aid refunds and data. Triage and handle incoming mail, email and calls. Handle resolution of student/parent complaints, actively mentor direct reports. Transfer funds in student accounts and assist with collections of past due accounts. Create strategies for payment collection, working closely with Financial Aid and Mane Desk partners. Identify students who need assistance and work with other campus leaders to support students in financial distress. Approve accounts for enrollment cancellation and communicate to the Registrar's Office. In coordination with other staff, develop and lead staff training modules and sessions for new and current staff and the SMU community to stay abreast of changes to federal, state, and institutional guidelines, procedures, and regulations. Develop and maintain quality control processes for top customer service and accurate student accounts review. Maintain strong relationships and partnerships with other critical units on campus to ensure exceptional service to our students. These partnership may include admissions (undergraduate and graduate), academic advising, Budget and Finance, graduate offices and other graduate schools, the SAES, student life, and athletics. Participate in committees having to do with student financial support and other work-related endeavors. Participate in webinars, presentations, videos and other sessions for incoming and continuing students and other stakeholders to educate them on payment and billing options, important dates, and other key student account topics. The Director is expected to play a lead role in acquiring and helping other staff to acquire continuous professional development and training to maintain current knowledge of state and federal regulations and university policies and procedures, to ensure top level customer service and program compliance. Other duties as assigned. Collaborates closely with the AVP of Student Financial Services to advance university financial goals. Provides timely and accurate collections data, and develops proactive, solution-oriented strategies to optimize student account management and tuition/misc. revenue recovery. Some weeknight/weekend and work is required. The Director will travel to workshops and conferences. Qualifications Education and Experience: Bachelor's is required. A minimum of 5 years of relevant experience is required PeopleSoft/Oracle Student Financials experience preferred MS Excel, Word, PowerPoint and Outlook are all required Knowledge, Skills and Abilities: Candidate must demonstrate strong interpersonal and verbal communication skills, with the ability to communicate broadly across the University and develop and maintain effective relationships with a wide range of constituencies. Must also demonstrate strong written communication skills. Candidate must possess strong problem-solving skills with the ability to identify and analyze problems, as well as devise solutions. Must also have strong organizational, planning and time management skills. Demonstrate the ability to articulate and perform an effective approach to leadership, supervision and management responsibilities is required. Tact and diplomacy, friendliness, supervisory skills, sense of humor, adaptability, strong verbal and written communication skills, mathematical fluency, and eagerness to serve students and families are essential aspects of the work. Requires thorough understanding of Student Account processes and service and strong skills with interpretation and development of policies, and procedures. Problem solving related to Student Account Services in accordance with policies and regulations is required. Ability to advance strategy in meeting deadlines, revenue recovery strategies, access and inclusion at the University. Physical and Environmental Demands: Sit for long periods Stand Exposure to excessive noise Deadline to Apply: This position will be open until filled EEO Statement SMU is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, age, disability, genetic information, veteran status, sexual orientation, or gender identity and expression. Benefits: SMU offers staff a broad, competitive array of health and related benefits. In addition to traditional benefits such as health, dental, and vision plans, SMU offers a wide range of wellness programs to help attract, support, and retain our employees whose work continues to make SMU an outstanding education and research institution. SMU is committed to providing an array of retirement programs that benefit and protect you and your family throughout your working years at SMU and, if you meet SMU's retirement eligibility criteria, during your retirement years after you leave SMU. The value of learning at SMU isn't just about preparing our students for the future. Employees have access to a wide variety of professional and personal development opportunities, including tuition benefits.
12/08/2025
Full time
Salary Range: Salary commensurate with experience and qualifications About SMU SMU's more than 12,000 diverse, high-achieving students come from all 50 states and over 80 countries to take advantage of the University's small classes, meaningful research opportunities, leadership development, community service, international study and innovative programs. SMU serves approximately 7,000 undergraduates and 5,000 graduate students through eight degree-granting schools: Dedman College of Humanities and Sciences, Cox School of Business, Lyle School of Engineering, Meadows School of the Arts, Simmons School of Education and Human Development, Dedman School of Law, Perkins School of Theology and Moody School of Graduate and Advanced Studies. SMU is data driven, and its powerful supercomputing ecosystem - paired with entrepreneurial drive - creates an unrivaled environment for the University to deliver research excellence. Now in its second century of achievement, SMU is recognized for the ways it supports students, faculty and alumni as they become ethical, enterprising leaders in their professions and communities. SMU's relationship with Dallas - the dynamic center of one of the nation's fastest-growing regions - offers unique learning, research, social and career opportunities that provide a launch pad for global impact. SMU is nonsectarian in its teaching and committed to academic freedom and open inquiry. About the Position: This role is an on-campus, in-person position. Job Summary: The Director of Student Account Services (SAS) is an integral part of the leadership of Student Financial Services. This role has the responsibility of setting strategic directions, policies, and procedures for the area. Reporting to the AVP of Student Financial Services, the Director is responsible for supervision of the Student Account Services staff and will create an environment that is compliance oriented, customer service focused, and accountable for specific outcomes related to the administration and delivery of financial support and collections programs. This role must exude strength on both a technical and interpersonal level with a results-driven mindset. This ability will align campus culture with a student-focused environment where staff are passionate about their roles, connected to SMU goals, work collaboratively, and understand their purpose to create a positive student experience, while managing tuition revenue recovery. Essential Functions: Manage a complex caseload with competing deadlines; lead a talented team through large-scale projects, and mentor team to communicate effectively to students, campus partners, and team members. Maintain a subject-matter expert level of knowledge on managing a significant student accounts services operation that is student-centered. Direct student account projects, caseloads and workflow for staff. Develop effective working relationships across department and division boundaries to ensure that projects and initiatives are successful. Use technology and data informed strategies to streamline processes across teams to support access and retention strategies for students from various backgrounds. Ability to explain complex details about the student account and a wide range of business processes. Leads professional, comprehensive, efficient and courteous customer service, post payments, removal of student account holds, manage payment plans, loan advisement, and process, analyze charges and payments, verify financial aid refunds and data. Triage and handle incoming mail, email and calls. Handle resolution of student/parent complaints, actively mentor direct reports. Transfer funds in student accounts and assist with collections of past due accounts. Create strategies for payment collection, working closely with Financial Aid and Mane Desk partners. Identify students who need assistance and work with other campus leaders to support students in financial distress. Approve accounts for enrollment cancellation and communicate to the Registrar's Office. In coordination with other staff, develop and lead staff training modules and sessions for new and current staff and the SMU community to stay abreast of changes to federal, state, and institutional guidelines, procedures, and regulations. Develop and maintain quality control processes for top customer service and accurate student accounts review. Maintain strong relationships and partnerships with other critical units on campus to ensure exceptional service to our students. These partnership may include admissions (undergraduate and graduate), academic advising, Budget and Finance, graduate offices and other graduate schools, the SAES, student life, and athletics. Participate in committees having to do with student financial support and other work-related endeavors. Participate in webinars, presentations, videos and other sessions for incoming and continuing students and other stakeholders to educate them on payment and billing options, important dates, and other key student account topics. The Director is expected to play a lead role in acquiring and helping other staff to acquire continuous professional development and training to maintain current knowledge of state and federal regulations and university policies and procedures, to ensure top level customer service and program compliance. Other duties as assigned. Collaborates closely with the AVP of Student Financial Services to advance university financial goals. Provides timely and accurate collections data, and develops proactive, solution-oriented strategies to optimize student account management and tuition/misc. revenue recovery. Some weeknight/weekend and work is required. The Director will travel to workshops and conferences. Qualifications Education and Experience: Bachelor's is required. A minimum of 5 years of relevant experience is required PeopleSoft/Oracle Student Financials experience preferred MS Excel, Word, PowerPoint and Outlook are all required Knowledge, Skills and Abilities: Candidate must demonstrate strong interpersonal and verbal communication skills, with the ability to communicate broadly across the University and develop and maintain effective relationships with a wide range of constituencies. Must also demonstrate strong written communication skills. Candidate must possess strong problem-solving skills with the ability to identify and analyze problems, as well as devise solutions. Must also have strong organizational, planning and time management skills. Demonstrate the ability to articulate and perform an effective approach to leadership, supervision and management responsibilities is required. Tact and diplomacy, friendliness, supervisory skills, sense of humor, adaptability, strong verbal and written communication skills, mathematical fluency, and eagerness to serve students and families are essential aspects of the work. Requires thorough understanding of Student Account processes and service and strong skills with interpretation and development of policies, and procedures. Problem solving related to Student Account Services in accordance with policies and regulations is required. Ability to advance strategy in meeting deadlines, revenue recovery strategies, access and inclusion at the University. Physical and Environmental Demands: Sit for long periods Stand Exposure to excessive noise Deadline to Apply: This position will be open until filled EEO Statement SMU is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, age, disability, genetic information, veteran status, sexual orientation, or gender identity and expression. Benefits: SMU offers staff a broad, competitive array of health and related benefits. In addition to traditional benefits such as health, dental, and vision plans, SMU offers a wide range of wellness programs to help attract, support, and retain our employees whose work continues to make SMU an outstanding education and research institution. SMU is committed to providing an array of retirement programs that benefit and protect you and your family throughout your working years at SMU and, if you meet SMU's retirement eligibility criteria, during your retirement years after you leave SMU. The value of learning at SMU isn't just about preparing our students for the future. Employees have access to a wide variety of professional and personal development opportunities, including tuition benefits.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Global Services (BGS) is seeking an Experienced and Lead Level Customer Technical Training Specialist to support the Training Team in Seattle, WA. The primary focus of this role is to develop, conduct and evaluate the effectiveness of technical training. This focus requires the analyses of customer technical training needs to determine appropriate training content, objectives, and design. Additional duties of the role include research, courseware updates, and the development of new media in support of customer training. This is an on-site Seattle position and is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. are occasionally required, as is travel both domestically and internationally up to 25% of the time. Position Responsibilities: Independently conducts customer training in broad subject areas using the approved medium to satisfy customer training requirements. Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives, and design. Develops, conducts, and evaluates effectiveness of technical training. Uses specialized software to research, configure, maintain, update, and develop new and existing media and materials. Travels for work up to 25% of the time. Ability to adjust shift. This position is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. Works under general supervision. May be asked to support other programs or perform other duties as needed. Basic Qualifications (Required Skills/Experience): Experience interpreting commercial technical data including drawings, maintenance, and operations manuals. Experience conducting technical training and/or performing instructional system development. 5+ years' experience in aircraft maintenance and modification (This is time you were the technician physically working on the airplane with tools in hand). Capable of traveling 25% of the time both domestically and internationally. Preferred Qualifications (Desired Skills/Experience): 5+ years' of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.). Licensed Aircraft Mechanic. Associate's degree or higher. 2+ years' experience conducting technical training and/or performing instructional system development. Experience maintaining large complex commercial aircraft and have provided instruction on the same. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. General: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Experience-Level Summary Pay Range: $82,450 - $111,550 Lead-Level Summary Pay Range: $102,850 - $139,150 Applications for this position will be accepted until Dec. 12, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
12/08/2025
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Global Services (BGS) is seeking an Experienced and Lead Level Customer Technical Training Specialist to support the Training Team in Seattle, WA. The primary focus of this role is to develop, conduct and evaluate the effectiveness of technical training. This focus requires the analyses of customer technical training needs to determine appropriate training content, objectives, and design. Additional duties of the role include research, courseware updates, and the development of new media in support of customer training. This is an on-site Seattle position and is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. are occasionally required, as is travel both domestically and internationally up to 25% of the time. Position Responsibilities: Independently conducts customer training in broad subject areas using the approved medium to satisfy customer training requirements. Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives, and design. Develops, conducts, and evaluates effectiveness of technical training. Uses specialized software to research, configure, maintain, update, and develop new and existing media and materials. Travels for work up to 25% of the time. Ability to adjust shift. This position is primarily a 1st shift position but occasional adjustments to support classes, meeting, workshops, etc. Works under general supervision. May be asked to support other programs or perform other duties as needed. Basic Qualifications (Required Skills/Experience): Experience interpreting commercial technical data including drawings, maintenance, and operations manuals. Experience conducting technical training and/or performing instructional system development. 5+ years' experience in aircraft maintenance and modification (This is time you were the technician physically working on the airplane with tools in hand). Capable of traveling 25% of the time both domestically and internationally. Preferred Qualifications (Desired Skills/Experience): 5+ years' of higher education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.). Licensed Aircraft Mechanic. Associate's degree or higher. 2+ years' experience conducting technical training and/or performing instructional system development. Experience maintaining large complex commercial aircraft and have provided instruction on the same. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. General: All information provided will be checked and may be verified. Please apply ASAP for this role as recruitment may commence before the end date. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Experience-Level Summary Pay Range: $82,450 - $111,550 Lead-Level Summary Pay Range: $102,850 - $139,150 Applications for this position will be accepted until Dec. 12, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
