2nd Shifts Available Work Schedule: 3:30PM - 12:00AM (M-F) And every other weekend Weekend work is required. Essential Duties and Responsibilities Team Lead will oversee pre-op and/or tear down depending on shift. Coordinate lines set-up. Reviews production issues, production schedule orders and product specifications. Works with other departments to prevent downtime. Demonstrated leadership abilities and will be responsible for training and directing 12-40 employees Leads continuous improvement plant wide. Assigns personnel to workstations and gives direction. Provides associate training as needed. Recommends corrective actions for non-compliance to supervisor. Has excellent communication skills and is very approachable. Ability to communicate with supervisors and line workers. Responsible for specification compliance. Responsible for documentation and legible record keeping for line, including, but not limited to, lot tracking, waste, quality checks, product usage, production and standards. Basic math skills, the ability to enter data into computer programs, and attention to detail. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and production reports such as product usage, packaging, lot tracking, labor tracking, waste control, daily worksheets, and any forms deemed necessary by the Production Manager and Production Supervisor. This position is expected to eventually cross train in all lead areas related to production and packaging. Must work safely at all times. On the floor 95% of shift. Must be able to work a flexible schedule. Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand and operate tools or controls. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. The employee may occasionally move up to 25 pounds with a hoist, pallet-jack or cart, and regularly lift up to 15 pounds of boxes of product, bales of cartons, or rolls of film. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Language Skills Ability to read, speak, and write in English. Bilingual capability is a plus. Education and/or Experience High school diploma or general education degree (GED); or three to six months related work experience and/or training; or equivalent combination of education and experience. Ability to work independently with minimal supervision yet be flexible and have the ability to work in a team environment. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Sponsorship for work authorization is not available for this position. It is the candidate's responsibility to ensure they are legally authorized to work in the location to which they apply. Benefits in just 30 days! Your health and well-being is important to us at Maker's Pride. Full-time employees can access medical, dental, and vision benefits after just 30 days of employment. Plus, our comprehensive benefits package includes a 401(k), wellness benefits, and other programs, subject to applicable eligibility requirements. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Maker's Pride is an Equal Opportunity Employer.
11/22/2026
Full time
2nd Shifts Available Work Schedule: 3:30PM - 12:00AM (M-F) And every other weekend Weekend work is required. Essential Duties and Responsibilities Team Lead will oversee pre-op and/or tear down depending on shift. Coordinate lines set-up. Reviews production issues, production schedule orders and product specifications. Works with other departments to prevent downtime. Demonstrated leadership abilities and will be responsible for training and directing 12-40 employees Leads continuous improvement plant wide. Assigns personnel to workstations and gives direction. Provides associate training as needed. Recommends corrective actions for non-compliance to supervisor. Has excellent communication skills and is very approachable. Ability to communicate with supervisors and line workers. Responsible for specification compliance. Responsible for documentation and legible record keeping for line, including, but not limited to, lot tracking, waste, quality checks, product usage, production and standards. Basic math skills, the ability to enter data into computer programs, and attention to detail. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and production reports such as product usage, packaging, lot tracking, labor tracking, waste control, daily worksheets, and any forms deemed necessary by the Production Manager and Production Supervisor. This position is expected to eventually cross train in all lead areas related to production and packaging. Must work safely at all times. On the floor 95% of shift. Must be able to work a flexible schedule. Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand and operate tools or controls. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. The employee may occasionally move up to 25 pounds with a hoist, pallet-jack or cart, and regularly lift up to 15 pounds of boxes of product, bales of cartons, or rolls of film. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Language Skills Ability to read, speak, and write in English. Bilingual capability is a plus. Education and/or Experience High school diploma or general education degree (GED); or three to six months related work experience and/or training; or equivalent combination of education and experience. Ability to work independently with minimal supervision yet be flexible and have the ability to work in a team environment. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Sponsorship for work authorization is not available for this position. It is the candidate's responsibility to ensure they are legally authorized to work in the location to which they apply. Benefits in just 30 days! Your health and well-being is important to us at Maker's Pride. Full-time employees can access medical, dental, and vision benefits after just 30 days of employment. Plus, our comprehensive benefits package includes a 401(k), wellness benefits, and other programs, subject to applicable eligibility requirements. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Maker's Pride is an Equal Opportunity Employer.
GENERAL SUMMARY A Sanitation Supervisor enforces the policies and procedures surrounding the food safety and hygiene. She/he examines all manufacturing equipment to ensure that it works properly and meets all governmental standards. In instances of violations, develops a plan to correct the situation. Possessing a keen understanding of industry regulations, he/she consults with management to address compliance issues and make recommendations to improve processes. Maintains a working relationship with chemical and pest control vendors. Developing training programs related to sanitation practices and company best practices, this individual also delivers these initiatives to employees in one-on-one and group settings. A Sanitation Supervisor keeps detailed records of all sanitation-related activities and issues, such as inspections and violations, also noting how and when each situation was resolved. The Sanitation Supervisor ensures that all Safety, Quality (related to Sanitation), Continuous Improvement and Cost expectations are delivered. The Sanitation Supervisor drives the sustainable improvements across the shift, working closely with the plant leadership and plant employees to achieve results. This position requires hands-on leadership. ESSENTIAL DUTIES AND RESPONSIBILITIES Overseeing the sanitation process Ensuring that health and safety guidelines are followed, and that continual improvement is made towards an injury free operation. Ensure key performance indicators in Sanitation areas are met or exceeded. Ensuring that the Sanitation process is cost effective, reliable, and meets all associated targets. Develop and track improvement in the use and efficiency of Sanitation labor resources. Coordinate set up and implement standard operating procedure for key Sanitation operations. Ensure that Sanitation does not detract from products are produced on time and are of good quality. Manage the adherence to prescribed procedures to ensure that quality (relating to sanitation) meets or exceeds planned goals. Work with Quality Manager/Supervisor to ensure that adequate processes are capable and improving. Ensure that human resources required to accomplish sanitation tasks are available; ensure that material resources (chemicals, tools, etc.) needed are available. Work with the Maintenance, Quality and Production to ensure sanitation related equipment PM's (e.g. PEC's) are completed timely as well as develop a good working relationship between production and maintenance personnel. Ensure complete compliance to GMP's and 5S processes. Work with the Sanitation Manager to estimate labor and operational costs for on-going operation and for new projects. Track competencies of subordinates and provide leadership and development as required to achieve the objectives. Monitor the Sanitation processes and adjusting schedules as needed. Implement and drive continuous improvement activities through implementation of change management process and best practices. Liaise among different departments, e.g. other departments, corporate resources, other plants, suppliers, etc. Optimize resource utilization by implementation of an effective Sanitation organization. Ensure coaching and development of team and other key resources to meet business's objectives. Supervise and motivate teams of workers. Review the performance of subordinates. Assists with the management of the Master Sanitation Schedule and Action Item Logs. Responsible for the titration testing of all chemicals needing titrated. Other duties as identified or assigned by Sanitation Manager. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Make sound business decisions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on your assigned shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. Position requires the ability to work in high temperature areas and work at heights more than 2' from the ground on a scissor lift. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work in a fast-paced environment. Be fast and flexible. LANGUAGE SKILLS Able to communicate and take direction from the Sanitation Manager. Bilingual Spanish/English is helpful. EDUCATION and/or EXPERIENCE 3 or more years of sanitation, food safety or quality supervisory experience in a food or beverage manufacturing environment. Large scale manufacturing experience a plus. Results oriented, possess strong interpersonal skills, be a team player as well as an independent worker and have strong and effective verbal and written communication skills. This person should be recognized as a leader capable of driving excellence. Possess leadership skills as well as an appropriate amount of technical skills in a high-speed manufacturing environment. A knowledge of LEAN Manufacturing techniques and related CI tools are required: I.e., Root Cause Analysis, Agile, Kaizen Events, Blitz, Value Stream Mapping, OEE, First Hour Full Power, Labor Analysis, 5S, 7 Forms of Waste, Pit Stop Changeovers, etc. Proficient in Microsoft Office applications and have some experience and/or the ability to learn associated corporate enterprise software systems to analyze and track data as well as ensuring the sanitation organization understands key operational information. Understanding of Master Sanitation Schedules. Demonstrated experience training teams is preferred. GMP (Good Manufacturing Practices) knowledge is required. Experience with SQF or BRC audit prep and ATP swab experience is a bonus. SUPERVISORY RESPONSIBILITIES The Sanitation Supervisor has direct reports consisting of group leaders, contract employees, and regular full-time employees. The shift crew consists of both Maker's Pride regular employees as well as contract employees. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Maker's Pride is an Equal Opportunity Employer.
11/22/2026
Full time
GENERAL SUMMARY A Sanitation Supervisor enforces the policies and procedures surrounding the food safety and hygiene. She/he examines all manufacturing equipment to ensure that it works properly and meets all governmental standards. In instances of violations, develops a plan to correct the situation. Possessing a keen understanding of industry regulations, he/she consults with management to address compliance issues and make recommendations to improve processes. Maintains a working relationship with chemical and pest control vendors. Developing training programs related to sanitation practices and company best practices, this individual also delivers these initiatives to employees in one-on-one and group settings. A Sanitation Supervisor keeps detailed records of all sanitation-related activities and issues, such as inspections and violations, also noting how and when each situation was resolved. The Sanitation Supervisor ensures that all Safety, Quality (related to Sanitation), Continuous Improvement and Cost expectations are delivered. The Sanitation Supervisor drives the sustainable improvements across the shift, working closely with the plant leadership and plant employees to achieve results. This position requires hands-on leadership. ESSENTIAL DUTIES AND RESPONSIBILITIES Overseeing the sanitation process Ensuring that health and safety guidelines are followed, and that continual improvement is made towards an injury free operation. Ensure key performance indicators in Sanitation areas are met or exceeded. Ensuring that the Sanitation process is cost effective, reliable, and meets all associated targets. Develop and track improvement in the use and efficiency of Sanitation labor resources. Coordinate set up and implement standard operating procedure for key Sanitation operations. Ensure that Sanitation does not detract from products are produced on time and are of good quality. Manage the adherence to prescribed procedures to ensure that quality (relating to sanitation) meets or exceeds planned goals. Work with Quality Manager/Supervisor to ensure that adequate processes are capable and improving. Ensure that human resources required to accomplish sanitation tasks are available; ensure that material resources (chemicals, tools, etc.) needed are available. Work with the Maintenance, Quality and Production to ensure sanitation related equipment PM's (e.g. PEC's) are completed timely as well as develop a good working relationship between production and maintenance personnel. Ensure complete compliance to GMP's and 5S processes. Work with the Sanitation Manager to estimate labor and operational costs for on-going operation and for new projects. Track competencies of subordinates and provide leadership and development as required to achieve the objectives. Monitor the Sanitation processes and adjusting schedules as needed. Implement and drive continuous improvement activities through implementation of change management process and best practices. Liaise among different departments, e.g. other departments, corporate resources, other plants, suppliers, etc. Optimize resource utilization by implementation of an effective Sanitation organization. Ensure coaching and development of team and other key resources to meet business's objectives. Supervise and motivate teams of workers. Review the performance of subordinates. Assists with the management of the Master Sanitation Schedule and Action Item Logs. Responsible for the titration testing of all chemicals needing titrated. Other duties as identified or assigned by Sanitation Manager. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Make sound business decisions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on your assigned shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. Position requires the ability to work in high temperature areas and work at heights more than 2' from the ground on a scissor lift. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work in a fast-paced environment. Be fast and flexible. LANGUAGE SKILLS Able to communicate and take direction from the Sanitation Manager. Bilingual Spanish/English is helpful. EDUCATION and/or EXPERIENCE 3 or more years of sanitation, food safety or quality supervisory experience in a food or beverage manufacturing environment. Large scale manufacturing experience a plus. Results oriented, possess strong interpersonal skills, be a team player as well as an independent worker and have strong and effective verbal and written communication skills. This person should be recognized as a leader capable of driving excellence. Possess leadership skills as well as an appropriate amount of technical skills in a high-speed manufacturing environment. A knowledge of LEAN Manufacturing techniques and related CI tools are required: I.e., Root Cause Analysis, Agile, Kaizen Events, Blitz, Value Stream Mapping, OEE, First Hour Full Power, Labor Analysis, 5S, 7 Forms of Waste, Pit Stop Changeovers, etc. Proficient in Microsoft Office applications and have some experience and/or the ability to learn associated corporate enterprise software systems to analyze and track data as well as ensuring the sanitation organization understands key operational information. Understanding of Master Sanitation Schedules. Demonstrated experience training teams is preferred. GMP (Good Manufacturing Practices) knowledge is required. Experience with SQF or BRC audit prep and ATP swab experience is a bonus. SUPERVISORY RESPONSIBILITIES The Sanitation Supervisor has direct reports consisting of group leaders, contract employees, and regular full-time employees. The shift crew consists of both Maker's Pride regular employees as well as contract employees. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Maker's Pride is an Equal Opportunity Employer.
GENERAL SUMMARY A Sanitation Supervisor enforces the policies and procedures surrounding the food safety and hygiene. She/he examines all manufacturing equipment to ensure that it works properly and meets all governmental standards. In instances of violations, develops a plan to correct the situation. Possessing a keen understanding of industry regulations, he/she consults with management to address compliance issues and make recommendations to improve processes. Maintains a working relationship with chemical and pest control vendors. Developing training programs related to sanitation practices and company best practices, this individual also delivers these initiatives to employees in one-on-one and group settings. A Sanitation Supervisor keeps detailed records of all sanitation-related activities and issues, such as inspections and violations, also noting how and when each situation was resolved. The Sanitation Supervisor ensures that all Safety, Quality (related to Sanitation), Continuous Improvement and Cost expectations are delivered. The Sanitation Supervisor drives the sustainable improvements across the shift, working closely with the plant leadership and plant employees to achieve results. This position requires hands-on leadership. ESSENTIAL DUTIES AND RESPONSIBILITIES Overseeing the sanitation process Ensuring that health and safety guidelines are followed, and that continual improvement is made towards an injury free operation. Ensure key performance indicators in Sanitation areas are met or exceeded. Ensuring that the Sanitation process is cost effective, reliable, and meets all associated targets. Develop and track improvement in the use and efficiency of Sanitation labor resources. Coordinate set up and implement standard operating procedure for key Sanitation operations. Ensure that Sanitation does not detract from products are produced on time and are of good quality. Manage the adherence to prescribed procedures to ensure that quality (relating to sanitation) meets or exceeds planned goals. Work with Quality Manager/Supervisor to ensure that adequate processes are capable and improving. Ensure that human resources required to accomplish sanitation tasks are available; ensure that material resources (chemicals, tools, etc.) needed are available. Work with the Maintenance, Quality and Production to ensure sanitation related equipment PM's (e.g. PEC's) are completed timely as well as develop a good working relationship between production and maintenance personnel. Ensure complete compliance to GMP's and 5S processes. Work with the Sanitation Manager to estimate labor and operational costs for on-going operation and for new projects. Track competencies of subordinates and provide leadership and development as required to achieve the objectives. Monitor the Sanitation processes and adjusting schedules as needed. Implement and drive continuous improvement activities through implementation of change management process and best practices. Liaise among different departments, e.g. other departments, corporate resources, other plants, suppliers, etc. Optimize resource utilization by implementation of an effective Sanitation organization. Ensure coaching and development of team and other key resources to meet business's objectives. Supervise and motivate teams of workers. Review the performance of subordinates. Assists with the management of the Master Sanitation Schedule and Action Item Logs. Responsible for the titration testing of all chemicals needing titrated. Other duties as identified or assigned by Sanitation Manager. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Make sound business decisions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on your assigned shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. Position requires the ability to work in high temperature areas and work at heights more than 2' from the ground on a scissor lift. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work in a fast-paced environment. Be fast and flexible. LANGUAGE SKILLS Able to communicate and take direction from the Sanitation Manager. Bilingual Spanish/English is helpful. EDUCATION and/or EXPERIENCE 3 or more years of sanitation, food safety or quality supervisory experience in a food or beverage manufacturing environment. Large scale manufacturing experience a plus. Results oriented, possess strong interpersonal skills, be a team player as well as an independent worker and have strong and effective verbal and written communication skills. This person should be recognized as a leader capable of driving excellence. Possess leadership skills as well as an appropriate amount of technical skills in a high-speed manufacturing environment. A knowledge of LEAN Manufacturing techniques and related CI tools are required: I.e., Root Cause Analysis, Agile, Kaizen Events, Blitz, Value Stream Mapping, OEE, First Hour Full Power, Labor Analysis, 5S, 7 Forms of Waste, Pit Stop Changeovers, etc. Proficient in Microsoft Office applications and have some experience and/or the ability to learn associated corporate enterprise software systems to analyze and track data as well as ensuring the sanitation organization understands key operational information. Understanding of Master Sanitation Schedules. Demonstrated experience training teams is preferred. GMP (Good Manufacturing Practices) knowledge is required. Experience with SQF or BRC audit prep and ATP swab experience is a bonus. SUPERVISORY RESPONSIBILITIES The Sanitation Supervisor has direct reports consisting of group leaders, contract employees, and regular full-time employees. The shift crew consists of both Maker's Pride regular employees as well as contract employees. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Maker's Pride is an Equal Opportunity Employer.
11/22/2026
Full time
GENERAL SUMMARY A Sanitation Supervisor enforces the policies and procedures surrounding the food safety and hygiene. She/he examines all manufacturing equipment to ensure that it works properly and meets all governmental standards. In instances of violations, develops a plan to correct the situation. Possessing a keen understanding of industry regulations, he/she consults with management to address compliance issues and make recommendations to improve processes. Maintains a working relationship with chemical and pest control vendors. Developing training programs related to sanitation practices and company best practices, this individual also delivers these initiatives to employees in one-on-one and group settings. A Sanitation Supervisor keeps detailed records of all sanitation-related activities and issues, such as inspections and violations, also noting how and when each situation was resolved. The Sanitation Supervisor ensures that all Safety, Quality (related to Sanitation), Continuous Improvement and Cost expectations are delivered. The Sanitation Supervisor drives the sustainable improvements across the shift, working closely with the plant leadership and plant employees to achieve results. This position requires hands-on leadership. ESSENTIAL DUTIES AND RESPONSIBILITIES Overseeing the sanitation process Ensuring that health and safety guidelines are followed, and that continual improvement is made towards an injury free operation. Ensure key performance indicators in Sanitation areas are met or exceeded. Ensuring that the Sanitation process is cost effective, reliable, and meets all associated targets. Develop and track improvement in the use and efficiency of Sanitation labor resources. Coordinate set up and implement standard operating procedure for key Sanitation operations. Ensure that Sanitation does not detract from products are produced on time and are of good quality. Manage the adherence to prescribed procedures to ensure that quality (relating to sanitation) meets or exceeds planned goals. Work with Quality Manager/Supervisor to ensure that adequate processes are capable and improving. Ensure that human resources required to accomplish sanitation tasks are available; ensure that material resources (chemicals, tools, etc.) needed are available. Work with the Maintenance, Quality and Production to ensure sanitation related equipment PM's (e.g. PEC's) are completed timely as well as develop a good working relationship between production and maintenance personnel. Ensure complete compliance to GMP's and 5S processes. Work with the Sanitation Manager to estimate labor and operational costs for on-going operation and for new projects. Track competencies of subordinates and provide leadership and development as required to achieve the objectives. Monitor the Sanitation processes and adjusting schedules as needed. Implement and drive continuous improvement activities through implementation of change management process and best practices. Liaise among different departments, e.g. other departments, corporate resources, other plants, suppliers, etc. Optimize resource utilization by implementation of an effective Sanitation organization. Ensure coaching and development of team and other key resources to meet business's objectives. Supervise and motivate teams of workers. Review the performance of subordinates. Assists with the management of the Master Sanitation Schedule and Action Item Logs. Responsible for the titration testing of all chemicals needing titrated. Other duties as identified or assigned by Sanitation Manager. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Make sound business decisions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on your assigned shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. Position requires the ability to work in high temperature areas and work at heights more than 2' from the ground on a scissor lift. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work in a fast-paced environment. Be fast and flexible. LANGUAGE SKILLS Able to communicate and take direction from the Sanitation Manager. Bilingual Spanish/English is helpful. EDUCATION and/or EXPERIENCE 3 or more years of sanitation, food safety or quality supervisory experience in a food or beverage manufacturing environment. Large scale manufacturing experience a plus. Results oriented, possess strong interpersonal skills, be a team player as well as an independent worker and have strong and effective verbal and written communication skills. This person should be recognized as a leader capable of driving excellence. Possess leadership skills as well as an appropriate amount of technical skills in a high-speed manufacturing environment. A knowledge of LEAN Manufacturing techniques and related CI tools are required: I.e., Root Cause Analysis, Agile, Kaizen Events, Blitz, Value Stream Mapping, OEE, First Hour Full Power, Labor Analysis, 5S, 7 Forms of Waste, Pit Stop Changeovers, etc. Proficient in Microsoft Office applications and have some experience and/or the ability to learn associated corporate enterprise software systems to analyze and track data as well as ensuring the sanitation organization understands key operational information. Understanding of Master Sanitation Schedules. Demonstrated experience training teams is preferred. GMP (Good Manufacturing Practices) knowledge is required. Experience with SQF or BRC audit prep and ATP swab experience is a bonus. SUPERVISORY RESPONSIBILITIES The Sanitation Supervisor has direct reports consisting of group leaders, contract employees, and regular full-time employees. The shift crew consists of both Maker's Pride regular employees as well as contract employees. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Maker's Pride is an Equal Opportunity Employer.
Job Description Job Description The Quality Control Analyst is responsible for performing analytical test methods on in-process intermediates and varying stages of drug products under minimal supervision and within cGMP guidelines, to support further manufacturing of commercial and clinical therapeutics. This role will involve knowledge that includes but is not limited to the following analyses and concepts: Protein determination by A280, Bradford, UV Absorbance, Enzyme activity, HPLC/UPLC, and method validation. This is a 12-month contract based in Novato, California. On-site Schedule: Wednesday through Saturday 1:00pm-11:30pm Pacific Time Responsibilities Perform a wide variety of analytical assays, maintaining test sample throughput, monitoring lab supplies, preparing reagents, contributing to process and method validation studies, supporting investigations and equipment validation, and brainstorming further development or improvement ideas for procedures. Work assignments will vary by degree of complexity. Timely facilitation of incoming sample receipt and accessioning flow, decipher batch assignments across all assay types in accordance with agreed upon best practices. Execute analytical methods to facilitate in-process testing under applicable cGMP guidelines, as well as contribute to the prompt reporting of results to meet the required timetables of internal customers. Evaluate completed assay validity, calculate and summarize results, analyze data per expected or specification ranges. Assist with the compilation and verification of trend analysis reports. Provide input or assay support to the progression of test method validation, investigations, technical studies, and method transfer protocols. Employee is expected to follow SOPs, make appropriate decisions in daily activities with minimal needs for intervention, and be able to recognize deviations from routine practices. Incumbent must accurately complete tasks on time to achieve lab goals, meanwhile limiting GMP / procedural errors, and be capable of accepting and incorporating feedback. Perform and collaborate with co-workers to appropriately share general housekeeping activity assignments and ensure systems for laboratory maintenance are adequate for creating a consistent state of inspection readiness. Assist with monitoring and the control of laboratory supply and critical reagent Inventories. Qualify as trainer for specified methods, provide training to less experienced staff. Exhibit proactive communication upon occurrence of compliance risks and deviations from laboratory procedures, perform initiation of investigation records within required timeframes. Attend team huddles and department meetings, generate ideas for laboratory infrastructure improvements and method optimization. Identify areas to improve operational excellence by reducing non-value-added activities and increasing process efficiency. Perform other responsibilities as deemed necessary. Must also demonstrate the ability to both manage time and prioritize routine work effectively. Employee must be able to interpret results against defined criteria, begin to apply critical thinking to routine work. He/she should demonstrate an ability to evaluate results against trend Reports, serve some degree of troubleshooting and capacity as trainer, and embrace an active role in following up on atypical results or issues. Communication of relevant information must be made to appropriate audiences, and attendance of necessary team meetings with some participation in discussions is essential. Employee should also be actively engaged in his/her role, exhibit frequent volunteerism as the work schedule flow permits and maintain a positive attitude. Qualifications Bachelor of Science degree. 0-3 years of relevant laboratory experience; QC specific experience is preferred. Experience with quality management systems, current Good Manufacturing Practices, and QC principles. Demonstrated working knowledge with respect to certified functional activities. Good documentation, written and verbal communication skills are essential. Must possess the ability to perform most tasks with minimal supervision. Computer literacy is required, with proficiency in Microsoft Word and Excel, and experience in Microsoft PowerPoint preferred. Familiarity with BINOCS or similar scheduling systems is preferred. Familiarity with SAP or similar enterprise systems is preferred. Must have a quality service attitude and focus, exhibit flexibility and willingness to work additional hours to meet production or laboratory process requirements. Company Description R&D Partners is a national staffing firm focused in the areas of: Scientific, Clinical Research and Engineering. Our team offers well over 200 years of combined staffing experience providing consulting, direct hire & outsourcing solutions with our west coast offices in San Francisco, Redwood City and San Diego, CA and our east coast offices located in Harrisburg, PA and Tampa, FL. The cornerstone of our success: a knowledgeable and experienced recruiting team. Our life sciences recruiters, clinical research recruiters and engineering recruiters are uniquely specialized. After a detailed assessment of our clients' needs, we can then identify appropriate candidates utilizing our established network of professionals. R&D Partners takes a proactive approach to recruiting, establishing relationships with experienced passive candidates so when the time is right, we can combine our candidates' talents with our clients' opportunities. Company Description R&D Partners is a national staffing firm focused in the areas of: Scientific, Clinical Research and Engineering. Our team offers well over 200 years of combined staffing experience providing consulting, direct hire & outsourcing solutions with our west coast offices in San Francisco, Redwood City and San Diego, CA and our east coast offices located in Harrisburg, PA and Tampa, FL. The cornerstone of our success: a knowledgeable and experienced recruiting team. Our life sciences recruiters, clinical research recruiters and engineering recruiters are uniquely specialized. After a detailed assessment of our clients' needs, we can then identify appropriate candidates utilizing our established network of professionals. R&D Partners takes a proactive approach to recruiting, establishing relationships with experienced passive candidates so when the time is right, we can combine our candidates' talents with our clients' opportunities.
11/22/2026
Full time
Job Description Job Description The Quality Control Analyst is responsible for performing analytical test methods on in-process intermediates and varying stages of drug products under minimal supervision and within cGMP guidelines, to support further manufacturing of commercial and clinical therapeutics. This role will involve knowledge that includes but is not limited to the following analyses and concepts: Protein determination by A280, Bradford, UV Absorbance, Enzyme activity, HPLC/UPLC, and method validation. This is a 12-month contract based in Novato, California. On-site Schedule: Wednesday through Saturday 1:00pm-11:30pm Pacific Time Responsibilities Perform a wide variety of analytical assays, maintaining test sample throughput, monitoring lab supplies, preparing reagents, contributing to process and method validation studies, supporting investigations and equipment validation, and brainstorming further development or improvement ideas for procedures. Work assignments will vary by degree of complexity. Timely facilitation of incoming sample receipt and accessioning flow, decipher batch assignments across all assay types in accordance with agreed upon best practices. Execute analytical methods to facilitate in-process testing under applicable cGMP guidelines, as well as contribute to the prompt reporting of results to meet the required timetables of internal customers. Evaluate completed assay validity, calculate and summarize results, analyze data per expected or specification ranges. Assist with the compilation and verification of trend analysis reports. Provide input or assay support to the progression of test method validation, investigations, technical studies, and method transfer protocols. Employee is expected to follow SOPs, make appropriate decisions in daily activities with minimal needs for intervention, and be able to recognize deviations from routine practices. Incumbent must accurately complete tasks on time to achieve lab goals, meanwhile limiting GMP / procedural errors, and be capable of accepting and incorporating feedback. Perform and collaborate with co-workers to appropriately share general housekeeping activity assignments and ensure systems for laboratory maintenance are adequate for creating a consistent state of inspection readiness. Assist with monitoring and the control of laboratory supply and critical reagent Inventories. Qualify as trainer for specified methods, provide training to less experienced staff. Exhibit proactive communication upon occurrence of compliance risks and deviations from laboratory procedures, perform initiation of investigation records within required timeframes. Attend team huddles and department meetings, generate ideas for laboratory infrastructure improvements and method optimization. Identify areas to improve operational excellence by reducing non-value-added activities and increasing process efficiency. Perform other responsibilities as deemed necessary. Must also demonstrate the ability to both manage time and prioritize routine work effectively. Employee must be able to interpret results against defined criteria, begin to apply critical thinking to routine work. He/she should demonstrate an ability to evaluate results against trend Reports, serve some degree of troubleshooting and capacity as trainer, and embrace an active role in following up on atypical results or issues. Communication of relevant information must be made to appropriate audiences, and attendance of necessary team meetings with some participation in discussions is essential. Employee should also be actively engaged in his/her role, exhibit frequent volunteerism as the work schedule flow permits and maintain a positive attitude. Qualifications Bachelor of Science degree. 0-3 years of relevant laboratory experience; QC specific experience is preferred. Experience with quality management systems, current Good Manufacturing Practices, and QC principles. Demonstrated working knowledge with respect to certified functional activities. Good documentation, written and verbal communication skills are essential. Must possess the ability to perform most tasks with minimal supervision. Computer literacy is required, with proficiency in Microsoft Word and Excel, and experience in Microsoft PowerPoint preferred. Familiarity with BINOCS or similar scheduling systems is preferred. Familiarity with SAP or similar enterprise systems is preferred. Must have a quality service attitude and focus, exhibit flexibility and willingness to work additional hours to meet production or laboratory process requirements. Company Description R&D Partners is a national staffing firm focused in the areas of: Scientific, Clinical Research and Engineering. Our team offers well over 200 years of combined staffing experience providing consulting, direct hire & outsourcing solutions with our west coast offices in San Francisco, Redwood City and San Diego, CA and our east coast offices located in Harrisburg, PA and Tampa, FL. The cornerstone of our success: a knowledgeable and experienced recruiting team. Our life sciences recruiters, clinical research recruiters and engineering recruiters are uniquely specialized. After a detailed assessment of our clients' needs, we can then identify appropriate candidates utilizing our established network of professionals. R&D Partners takes a proactive approach to recruiting, establishing relationships with experienced passive candidates so when the time is right, we can combine our candidates' talents with our clients' opportunities. Company Description R&D Partners is a national staffing firm focused in the areas of: Scientific, Clinical Research and Engineering. Our team offers well over 200 years of combined staffing experience providing consulting, direct hire & outsourcing solutions with our west coast offices in San Francisco, Redwood City and San Diego, CA and our east coast offices located in Harrisburg, PA and Tampa, FL. The cornerstone of our success: a knowledgeable and experienced recruiting team. Our life sciences recruiters, clinical research recruiters and engineering recruiters are uniquely specialized. After a detailed assessment of our clients' needs, we can then identify appropriate candidates utilizing our established network of professionals. R&D Partners takes a proactive approach to recruiting, establishing relationships with experienced passive candidates so when the time is right, we can combine our candidates' talents with our clients' opportunities.
Job Description Job Description Description: Concentric, LLC is the nation's largest independent industrial power provider, delivering forklift power, critical infrastructure, mechanical/HVAC, and dedicated material handling and automation maintenance solutions. Through a nationwide network of technicians, engineers, and support teams, Concentric understands and prioritizes the unique needs of each customer to maximize uptime, improve operational efficiency, and maintain infrastructure. We provide reliable, scalable solutions that support data centers, telecommunications providers, utilities, manufacturing, distribution, commercial facilities, and other mission-critical environments across America. Job Summary The Environment, Health, and Safety (EHS) Director is a critical position within the Company, providing strategic direction, oversight, and management of the organization's EHS programs and initiatives. This position leads efforts to ensure compliance with all relevant environmental, health, and safety regulations, as well as foster a culture of safety and sustainability across the organization. This position plays a crucial role in safeguarding employees, the community, and the environment while driving operational excellence and risk reduction. This position reports to the VP of HR, Safety & Training and typically has 2 or more direct reports. Key Job Responsibilities: Reliable attendance and punctuality. Responsible for hiring, training, performance management, and termination of staff. Develop and implement the overall EHS strategy aligned with the organization's mission, vision, and values. Collaborate with senior management to integrate EHS considerations into the company's overall business strategies. Lead investigations involving serious injuries, vehicle accidents, environmental incidents, near misses, and property damage events, ensuring timely root cause analysis, corrective actions, and organizational learning. Monitor and interpret applicable EHS regulations and standards, ensuring compliance at all levels of the organization. Oversee the submission of necessary reports and permits to relevant regulatory bodies. Establish and maintain relationships with regulatory agencies and other external stakeholders. Conduct comprehensive risk assessments to identify potential hazards and risks across various operations. Partner with Human Resources, Operations, insurance carriers, and third-party administrators to oversee workers' compensation, auto liability, and general liability claims, while driving injury reduction and return-to-work initiatives. Develop and execute risk management plans to mitigate and control identified risks. health and safety programs. Design and implement health and safety programs, policies, and procedures to create a safe working environment for all employees. Promote a strong safety culture through training, awareness campaigns, and engagement activities. Must have a thorough understanding of DOT regulations, including those related to the transportation of hazardous materials, vehicle maintenance, driver qualifications, hours of service, and more. Develop comprehensive policies and procedures that align with DOT regulations and ensure that all employees involved in transportation operations are aware of and follow these protocols. Lead efforts to minimize the organization's environmental impact through sustainability initiatives and waste reduction programs. Implement and maintain environmental management systems and certifications. Establish key performance indicators (KPIs) for EHS and track progress toward achieving objectives. Develop and maintain emergency response, crisis management, and business continuity protocols related to employee health, safety, environmental incidents, and natural disasters. Prepare regular reports for senior management on EHS performance. Develop and manage the EHS department budget, ensuring optimal allocation of resources. Recruit, train, and mentor EHS professionals, fostering a high-performing and motivated team. Provide guidance and support to EHS staff in their daily activities. Other job duties as assigned by supervisor. Key Performance Measurements: Improved Total Recordable Incident Rate (TRIR). DOT regulatory compliance; sustained improvement. Safety training completion rate. Other key performance indicators as assigned. Requirements: High school diploma or GED, required. Bachelor's degree in Occupational Safety, Environmental Science, Industrial Hygiene, Risk Management, Business Administration, or related field preferred. Master's degree in Safety, Environmental Management, Business Administration, or related field preferred. Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), Associate Safety Professional (ASP), Certified Hazardous Materials Manager (CHMM), or similar credential preferred . DOT compliance certifications or transportation safety training preferred. Must have 10+ years of progressive experience in Environmental, Health & Safety, Fleet Safety, DOT Compliance, Risk Management, or related operational safety functions, including experience supporting dispersed field operations. Must have 5+ years' experience in EHS in a leadership position. Experience managing EHS budgets, capital safety improvement projects, and vendor relationships. Must pass a background check and drug screen. Demonstrated experience leading EHS programs across multiple locations and geographically dispersed operations. Demonstrated success in developing and implementing EHS strategies and programs. Extensive knowledge of Federal and State-specific OSHA /DOT, and Environmental regulations required. Familiarity with best practices in asset protection, post-accident, and claims management. Success at executing accident analysis programs and corrective action processes. Ability to interact with all levels of employees, from hourly production workers to corporate executives. Industrial equipment, maintenance, and fleet safety background are highly desirable. Strong knowledge of Hazmat and environmental processes and regulations. Computer skills including Microsoft Office (Word, Excel, PowerPoint, and Outlook). Must be willing to travel 30-50% with some overnight travel required. This job description is subject to change at any time. Benefits At Concentric we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading benefits: Competitive pay - Plus incentive opportunities and overtime potential for our hourly employees! Three medical plan options with employer premium contribution that start on day one. Employee paid dental and vision insurance that starts on day one. Health Savings Account (HSA) with company contribution on eligible High-Deductible Health Plans (HDHP). Medical and dependent care Flexible Spending Accounts (FSA) available. Company-paid life and AD&D insurance, short-term and long-term disability coverage that start on day one. Company 401K plan with 100% match on the first 4% of employee contributions. 8 paid holidays. Full-time Employees receive a total of 128 Hours of Paid Time Off (PTO) Annually. We offer employee paid accident, critical illness, and hospital indemnity insurance. We offer employee paid legal plans, identity protection, pet insurance, and home & auto discounts. Training and mentoring - Learn from our experts in the industry. Advancement opportunities. The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit or stand up to 8 hours; use hands to type, maneuver, handle, or feel; and talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up 25 pounds. While performing the duties of this job, the employee may be required to wear approved Personal Protective Equipment (PPE) and must maintain a high level of self-awareness about their surroundings. Specific vision abilities required by this job include close vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work is performed primarily in customer facility locations, Concentric office space, hotels, and more . click apply for full job details
11/21/2026
Full time
Job Description Job Description Description: Concentric, LLC is the nation's largest independent industrial power provider, delivering forklift power, critical infrastructure, mechanical/HVAC, and dedicated material handling and automation maintenance solutions. Through a nationwide network of technicians, engineers, and support teams, Concentric understands and prioritizes the unique needs of each customer to maximize uptime, improve operational efficiency, and maintain infrastructure. We provide reliable, scalable solutions that support data centers, telecommunications providers, utilities, manufacturing, distribution, commercial facilities, and other mission-critical environments across America. Job Summary The Environment, Health, and Safety (EHS) Director is a critical position within the Company, providing strategic direction, oversight, and management of the organization's EHS programs and initiatives. This position leads efforts to ensure compliance with all relevant environmental, health, and safety regulations, as well as foster a culture of safety and sustainability across the organization. This position plays a crucial role in safeguarding employees, the community, and the environment while driving operational excellence and risk reduction. This position reports to the VP of HR, Safety & Training and typically has 2 or more direct reports. Key Job Responsibilities: Reliable attendance and punctuality. Responsible for hiring, training, performance management, and termination of staff. Develop and implement the overall EHS strategy aligned with the organization's mission, vision, and values. Collaborate with senior management to integrate EHS considerations into the company's overall business strategies. Lead investigations involving serious injuries, vehicle accidents, environmental incidents, near misses, and property damage events, ensuring timely root cause analysis, corrective actions, and organizational learning. Monitor and interpret applicable EHS regulations and standards, ensuring compliance at all levels of the organization. Oversee the submission of necessary reports and permits to relevant regulatory bodies. Establish and maintain relationships with regulatory agencies and other external stakeholders. Conduct comprehensive risk assessments to identify potential hazards and risks across various operations. Partner with Human Resources, Operations, insurance carriers, and third-party administrators to oversee workers' compensation, auto liability, and general liability claims, while driving injury reduction and return-to-work initiatives. Develop and execute risk management plans to mitigate and control identified risks. health and safety programs. Design and implement health and safety programs, policies, and procedures to create a safe working environment for all employees. Promote a strong safety culture through training, awareness campaigns, and engagement activities. Must have a thorough understanding of DOT regulations, including those related to the transportation of hazardous materials, vehicle maintenance, driver qualifications, hours of service, and more. Develop comprehensive policies and procedures that align with DOT regulations and ensure that all employees involved in transportation operations are aware of and follow these protocols. Lead efforts to minimize the organization's environmental impact through sustainability initiatives and waste reduction programs. Implement and maintain environmental management systems and certifications. Establish key performance indicators (KPIs) for EHS and track progress toward achieving objectives. Develop and maintain emergency response, crisis management, and business continuity protocols related to employee health, safety, environmental incidents, and natural disasters. Prepare regular reports for senior management on EHS performance. Develop and manage the EHS department budget, ensuring optimal allocation of resources. Recruit, train, and mentor EHS professionals, fostering a high-performing and motivated team. Provide guidance and support to EHS staff in their daily activities. Other job duties as assigned by supervisor. Key Performance Measurements: Improved Total Recordable Incident Rate (TRIR). DOT regulatory compliance; sustained improvement. Safety training completion rate. Other key performance indicators as assigned. Requirements: High school diploma or GED, required. Bachelor's degree in Occupational Safety, Environmental Science, Industrial Hygiene, Risk Management, Business Administration, or related field preferred. Master's degree in Safety, Environmental Management, Business Administration, or related field preferred. Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), Associate Safety Professional (ASP), Certified Hazardous Materials Manager (CHMM), or similar credential preferred . DOT compliance certifications or transportation safety training preferred. Must have 10+ years of progressive experience in Environmental, Health & Safety, Fleet Safety, DOT Compliance, Risk Management, or related operational safety functions, including experience supporting dispersed field operations. Must have 5+ years' experience in EHS in a leadership position. Experience managing EHS budgets, capital safety improvement projects, and vendor relationships. Must pass a background check and drug screen. Demonstrated experience leading EHS programs across multiple locations and geographically dispersed operations. Demonstrated success in developing and implementing EHS strategies and programs. Extensive knowledge of Federal and State-specific OSHA /DOT, and Environmental regulations required. Familiarity with best practices in asset protection, post-accident, and claims management. Success at executing accident analysis programs and corrective action processes. Ability to interact with all levels of employees, from hourly production workers to corporate executives. Industrial equipment, maintenance, and fleet safety background are highly desirable. Strong knowledge of Hazmat and environmental processes and regulations. Computer skills including Microsoft Office (Word, Excel, PowerPoint, and Outlook). Must be willing to travel 30-50% with some overnight travel required. This job description is subject to change at any time. Benefits At Concentric we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading benefits: Competitive pay - Plus incentive opportunities and overtime potential for our hourly employees! Three medical plan options with employer premium contribution that start on day one. Employee paid dental and vision insurance that starts on day one. Health Savings Account (HSA) with company contribution on eligible High-Deductible Health Plans (HDHP). Medical and dependent care Flexible Spending Accounts (FSA) available. Company-paid life and AD&D insurance, short-term and long-term disability coverage that start on day one. Company 401K plan with 100% match on the first 4% of employee contributions. 8 paid holidays. Full-time Employees receive a total of 128 Hours of Paid Time Off (PTO) Annually. We offer employee paid accident, critical illness, and hospital indemnity insurance. We offer employee paid legal plans, identity protection, pet insurance, and home & auto discounts. Training and mentoring - Learn from our experts in the industry. Advancement opportunities. The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit or stand up to 8 hours; use hands to type, maneuver, handle, or feel; and talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up 25 pounds. While performing the duties of this job, the employee may be required to wear approved Personal Protective Equipment (PPE) and must maintain a high level of self-awareness about their surroundings. Specific vision abilities required by this job include close vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work is performed primarily in customer facility locations, Concentric office space, hotels, and more . click apply for full job details
Job Summary Medline Industries, LP is a leading healthcare company driven by a simple purpose: Together, we make healthcare run better. We're seeking a Warehouse Operator to join our team and play a vital role in delivering products that healthcare providers depend on every day. In this role, you'll safely operate warehouse equipment and move product throughout the facility, including receiving, scanning, picking, staging, loading, and shipping. If you're a dependable team player who takes pride in quality work and wants to grow with a company that values collaboration, belonging, and results, we'd love to hear from you. Job Description MAJOR RESPONSIBILITIES: Catalogues, records, and organizes materials received at the warehouse; Arrange materials for order assembly Fulfills worksheets or tickets for customers by reading production schedules, order forms and requisitions Locates and gathers products for to move and distribute to production workers, assembly line, or to shipping areas Assembles, builds, wraps, sorts, and transports customer orders Operates hand truck, cart, doilies, forklift, order-picker, and walkie to transport items Maintain a clean and safe work area MINIMUM JOB REQUIREMENTS: Education: N/A Certification / Licensure: None Work Experience: No experience required Knowledge / Skills / Abilities: Ability to speak, read, and write English with proficiency. Ability to read and comprehend simple instructions, short correspondence and memos. Basic keypunch skills. Ability to bend, twist, reach, push, lift for extended periods daily Ability to lift 50 lbs Must be able to stand for 8 hours per day for up to 6 days a week Must have high sense of urgency Flexibility to work mandatory overtime based on business needs PREFERRED JOB REQUIREMENTS: Education: High school diploma or General Education Degree (GED) Certification / Licensure: None Work Experience: 1-3 months related experience and/or training Knowledge / Skills / Abilities: None Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization. The anticipated salary range for this position: $20.25 - $29.25 Hourly The actual salary will vary based on applicant's location, education, experience, skills, and abilities. Medline will not pay less than the applicable minimum wage or salary threshold. Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For roles where employees work less than 30 hours per week, benefits include 401(k) contributions, paid time off, as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp. For a more comprehensive list of our benefits please click here. We're dedicated to creating a Medline where everyone feels they belong and can grow their career. We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best. Explore our Belonging page here. Medline Industries, LP is an equal opportunity employer. Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Medline Industries, LP complies with the Los Angeles County Fair Chance Ordinance for Employees (FCO) and the State of California Fair Chance Act (FCA). In accordance with the FCO and FCA, an applicant's criminal history will not result in automatic disqualification from employment. Qualified applicants with arrest or conviction records will be considered for employment
11/21/2026
Full time
Job Summary Medline Industries, LP is a leading healthcare company driven by a simple purpose: Together, we make healthcare run better. We're seeking a Warehouse Operator to join our team and play a vital role in delivering products that healthcare providers depend on every day. In this role, you'll safely operate warehouse equipment and move product throughout the facility, including receiving, scanning, picking, staging, loading, and shipping. If you're a dependable team player who takes pride in quality work and wants to grow with a company that values collaboration, belonging, and results, we'd love to hear from you. Job Description MAJOR RESPONSIBILITIES: Catalogues, records, and organizes materials received at the warehouse; Arrange materials for order assembly Fulfills worksheets or tickets for customers by reading production schedules, order forms and requisitions Locates and gathers products for to move and distribute to production workers, assembly line, or to shipping areas Assembles, builds, wraps, sorts, and transports customer orders Operates hand truck, cart, doilies, forklift, order-picker, and walkie to transport items Maintain a clean and safe work area MINIMUM JOB REQUIREMENTS: Education: N/A Certification / Licensure: None Work Experience: No experience required Knowledge / Skills / Abilities: Ability to speak, read, and write English with proficiency. Ability to read and comprehend simple instructions, short correspondence and memos. Basic keypunch skills. Ability to bend, twist, reach, push, lift for extended periods daily Ability to lift 50 lbs Must be able to stand for 8 hours per day for up to 6 days a week Must have high sense of urgency Flexibility to work mandatory overtime based on business needs PREFERRED JOB REQUIREMENTS: Education: High school diploma or General Education Degree (GED) Certification / Licensure: None Work Experience: 1-3 months related experience and/or training Knowledge / Skills / Abilities: None Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization. The anticipated salary range for this position: $20.25 - $29.25 Hourly The actual salary will vary based on applicant's location, education, experience, skills, and abilities. Medline will not pay less than the applicable minimum wage or salary threshold. Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For roles where employees work less than 30 hours per week, benefits include 401(k) contributions, paid time off, as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp. For a more comprehensive list of our benefits please click here. We're dedicated to creating a Medline where everyone feels they belong and can grow their career. We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best. Explore our Belonging page here. Medline Industries, LP is an equal opportunity employer. Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Medline Industries, LP complies with the Los Angeles County Fair Chance Ordinance for Employees (FCO) and the State of California Fair Chance Act (FCA). In accordance with the FCO and FCA, an applicant's criminal history will not result in automatic disqualification from employment. Qualified applicants with arrest or conviction records will be considered for employment
SAFETY. TEAMWORK. CLARITY. BURNCO is looking to add skilled Diesel Mechanics to our Irving, Texas team . You're someone who drives change and takes pride in their high-quality workmanship and their ability to get things done effectively and timely. You do great work, you're a great team player and you're ready to earn some fantastic wages supporting one of the industry's top performers. Join a solid team building infrastructure that will be around for generations. What You Will Be Doing Install, maintain, and repair machinery, equipment, physical structures, plumbing and electrical systems following specifications, blue prints and manuals Perform daily visual inspections of machinery and equipment while diagnosing sounds to determine malfunctions Comply with BURNCO policies and local, state, and federal regulations including DOT and company driving requirements Communicate timely and effectively with Plant Coordinator and Production Supervisor to inform them about major mechanical problems Record service performance through data entry and maintain parts inventory Operate mobile equipment when required Perform daily preventative maintenance, record and inspection on service vehicle which includes fueling, cleaning, tire/light inspection, and fluid level maintenance Service pumps/motors Perform welding, repair and fabrication May make service calls to other BURNCO plants as needed Demonstrate good knowledge of lock out/tag out procedures Communicate with co-workers through direct hand signals and a two-way radio Assist in the training and orientation of co-workers as needed Perform general clean-up of work area and other duties as required What We Would Like From You Good working knowledge of mechanics as related to truck and general maintenance Ability to use power tools, welders, cutting torches/chains and various safety devices Demonstrated knowledge of proper mechanic/maintenance procedures such as lockout/tag outs and special work permits Must be proficient with computer and program systems Experience with Allison transmissions, Davie 4 and ESA software a plus Excellent verbal and written communication skills Ability to pass MVR (clean driving record) Commercial Driver's License with Class A or B Certification preferred Provide own personal tools up to Ability to work well with others in a team environment High School Diploma preferred 1 year of Truck Mechanic experience required Experience with concrete mixers and aggregate haul trucks preferred Must be able to diagnose engines, electrical systems, hydraulic systems, transmissions, suspensions and brakes What's In It For You In addition to competitive pay, we provide the following benefits: Excellent Benefits Program including: medical, dental, vision and employee assistance programs 4% Company Matching 401k Plan Paid Weekly Every Friday - Just Like Clockwork Holiday, Vacation, Bereavement, Jury Duty Pay - With No Waiting Periods! Voucher for safety boots and glasses each year! Since 1912, BURNCO has been supplying aggregate construction materials as a successful, family-run business based in Calgary. Over the last 110 years we have embraced innovative technology and new marketplaces while always maintaining the vision and values that were first introduced by our founder, James F. Burns. Today we continue our unwavering commitment to safety, our renewed focus on family leadership and our steady, dependable growth into the future. We look forward to having you join us on that journey. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
11/21/2026
Full time
SAFETY. TEAMWORK. CLARITY. BURNCO is looking to add skilled Diesel Mechanics to our Irving, Texas team . You're someone who drives change and takes pride in their high-quality workmanship and their ability to get things done effectively and timely. You do great work, you're a great team player and you're ready to earn some fantastic wages supporting one of the industry's top performers. Join a solid team building infrastructure that will be around for generations. What You Will Be Doing Install, maintain, and repair machinery, equipment, physical structures, plumbing and electrical systems following specifications, blue prints and manuals Perform daily visual inspections of machinery and equipment while diagnosing sounds to determine malfunctions Comply with BURNCO policies and local, state, and federal regulations including DOT and company driving requirements Communicate timely and effectively with Plant Coordinator and Production Supervisor to inform them about major mechanical problems Record service performance through data entry and maintain parts inventory Operate mobile equipment when required Perform daily preventative maintenance, record and inspection on service vehicle which includes fueling, cleaning, tire/light inspection, and fluid level maintenance Service pumps/motors Perform welding, repair and fabrication May make service calls to other BURNCO plants as needed Demonstrate good knowledge of lock out/tag out procedures Communicate with co-workers through direct hand signals and a two-way radio Assist in the training and orientation of co-workers as needed Perform general clean-up of work area and other duties as required What We Would Like From You Good working knowledge of mechanics as related to truck and general maintenance Ability to use power tools, welders, cutting torches/chains and various safety devices Demonstrated knowledge of proper mechanic/maintenance procedures such as lockout/tag outs and special work permits Must be proficient with computer and program systems Experience with Allison transmissions, Davie 4 and ESA software a plus Excellent verbal and written communication skills Ability to pass MVR (clean driving record) Commercial Driver's License with Class A or B Certification preferred Provide own personal tools up to Ability to work well with others in a team environment High School Diploma preferred 1 year of Truck Mechanic experience required Experience with concrete mixers and aggregate haul trucks preferred Must be able to diagnose engines, electrical systems, hydraulic systems, transmissions, suspensions and brakes What's In It For You In addition to competitive pay, we provide the following benefits: Excellent Benefits Program including: medical, dental, vision and employee assistance programs 4% Company Matching 401k Plan Paid Weekly Every Friday - Just Like Clockwork Holiday, Vacation, Bereavement, Jury Duty Pay - With No Waiting Periods! Voucher for safety boots and glasses each year! Since 1912, BURNCO has been supplying aggregate construction materials as a successful, family-run business based in Calgary. Over the last 110 years we have embraced innovative technology and new marketplaces while always maintaining the vision and values that were first introduced by our founder, James F. Burns. Today we continue our unwavering commitment to safety, our renewed focus on family leadership and our steady, dependable growth into the future. We look forward to having you join us on that journey. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
General Utility - 1st Shift General Utility Level 1 Position Summary The position General Utility is the entry level production role. It is not bound by one specific role within the production area, but rather a description of a number of duties with in this job classification. The is a general labor role. Responsibilities All employees are required to contribute to production operations by complying with policies and procedures for meat processing; Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) regulations, etc. All employees are required to contribute to a safe and sanitary work environment by complying with established procedures and rules. General Utility - Sanitation/ Pack-Off (Tan frock) Must maintain all pack-out production areas in clean and sanitary conditions. Communicate any issues that are leading to unsanitary conditions in a timely manner to Supervisor and/or Foreman Track and record all inedible/empty, weigh all yellow inedible totes or barrels, and empty all trash containers. Properly dispose and label all inedible collected (Spraying denaturant on the inedible product) Break down all empty combos Remove all old printing and labels from the combo before reusing. (Company & USDA) All trash, cardboard, and plastic liners must be put in proper containers. Ensure the area is staged with inedible containers at start-up and/or ensure all end-of-night dry pick-up duties are performed accurately and in a timely manner. Assist in accurately training new hires in performing Sanitation/Tan Frock duties Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Attend to the current needs of the process by responding immediately to the expressed instructions of the Production Supervisor and/or Production Foreman General Utility - Packer Assist with Preparing / Disassembling packaging equipment for the operation, of meat-processing or for sanitation. Place each bag in the correct box, visually inspecting each bag to ensure a proper seal. Place any defects in a properly labeled rework container Assist with the collection, opening, and reuse of rework ensuring proper identification of product and line to eliminate cross-contamination and allergen concerns Assist in relieving co-workers for breaks, which may mean assisting in another position Must maintain the production area clean and in a sanitary condition. Accurately complete any assigned paperwork Assisting in accurately training new employees for Packer duties Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Attend to current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman General Utility - Palletizer Will coordinate with Foreman/ Supervisor/ Ilapak operator, and Shipping and utilize proper Product specification sheet to identify the product that is scheduled to verify and ensure pallets are being stacked correctly, (case per row, how many rows, and pallet configuration) Visually inspect cases to ensure cases are labeled and have a clear legible code date. Make required adjustments to machinery to facilitate smooth production including but not limited to changing tape, changing code dates, and communicating any all issues in a timely manner Operate a manual hand jack as needed (operate a power jack but training is required in the operation of power jacks) Facilitating and assisting in the reworking product into production in a timely manner including but not limited to; opening bags and boxes, and reworking combos Will assemble, disassemble, and change over equipment including but not limited to; film, tubes, etc., and ensure the machine is protected from the sanitation process Will communicate all equipment malfunctions in a timely manner Must maintain production area clean and in sanitary condition Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Assist with Preparing / Disassembling processing equipment for the operation, of meat-processing or for sanitation. Attend to the current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman General Utility - Box Maker Will coordinate with Foreman/ Supervisor/ Initial operator, and Shipping to identify the product that is scheduled to verify, and stage needed supplies are present for scheduled production runs Ensure that boxes, labels, and all other supplies needed for the production run and any changeover are present are staged to facilitate smooth production, communicating any issues or shortages with the supervisor and or foreman Ensure label and box match the Specification sheet, and boxes are clear of damage prior to sending to the line (including product label and/or export label) Make required adjustments to machinery to facilitate smooth production communicating any issue with the foreman and or supervisor Communicate with Foreman and or Supervisor to gain an understanding of when boxes need to be changed over and have box change completed and ready for the next production run Communicating and assisting in the transport of frozen rework to the Processing/Grinding location and ensuring the combo is accurately and clearly labeled to prevent cross-contamination or allergen concerns Will communicate all equipment malfunctions in timely manner Must maintain production/ box room area clean and in sanitary condition All assigned paperwork Will assist with normal start up or end of night duties including but not limited to: dry pick up, Tan frock duties, breaking down boxes, back staging packing materials and /or product, cleaning, covering, and/or wrapping equipment to protect from sanitation process Assist with Preparing / Disassemble processing equipment for operation, of meat- processing or for sanitation. Attend to current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman Perform other duties as assigned. Qualifications High School diploma or General Educational Development (GED) equivalent in training or experience. The ability to read, write and speak English. Must be dependable and detail-oriented. Must be able to follow directions and work under minimal supervision. Communicate effectively and clearly in a timely manner. Must be willing to work weekends and overtime hours as the company necessitates. Ability to communicate clearly, both verbally and in writing. Ability to multi-task in a fast-paced environment safely. Physical Demands and Work Environment: This job operates in a manufacturing environment. The characteristics described here are representative of those an employee encounter while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and high, precarious places. The employee is frequently exposed to colder (30 degrees) and/or warmer temperature areas. The noise level in the work environment is usually high. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands and fingers, to handle, or feel; reach with hands and arms; climb or balance, stoop, kneel, crouch, or crawl, talk or hear as defined below. Standard of 10 hours shifts and longer as the company requires Standing and/or walking constantly throughout the shift Lifting /Carrying a minimum of 50 lbs. Use both hands as necessary The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Fair Oaks Foods assures equal employment opportunity in all its hiring and employment policies and practices, which include all aspects of employment, such as recruiting, hiring, promotions, transfers, demotions, layoffs or terminations, compensation, benefits, training, company-sponsored education, social and recreational programs or events, and all other terms, conditions, and privileges of employment. These policies and practices are administered without regard to "legally protected categories" such as: race, color, religion, national origin, age, gender, disability, marital status, veteran status, sexual orientation or sexual orientation, pregnancy status or medical conditions related to childbirth, and/or any other factor protected by law. . click apply for full job details
11/21/2026
Full time
General Utility - 1st Shift General Utility Level 1 Position Summary The position General Utility is the entry level production role. It is not bound by one specific role within the production area, but rather a description of a number of duties with in this job classification. The is a general labor role. Responsibilities All employees are required to contribute to production operations by complying with policies and procedures for meat processing; Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) regulations, etc. All employees are required to contribute to a safe and sanitary work environment by complying with established procedures and rules. General Utility - Sanitation/ Pack-Off (Tan frock) Must maintain all pack-out production areas in clean and sanitary conditions. Communicate any issues that are leading to unsanitary conditions in a timely manner to Supervisor and/or Foreman Track and record all inedible/empty, weigh all yellow inedible totes or barrels, and empty all trash containers. Properly dispose and label all inedible collected (Spraying denaturant on the inedible product) Break down all empty combos Remove all old printing and labels from the combo before reusing. (Company & USDA) All trash, cardboard, and plastic liners must be put in proper containers. Ensure the area is staged with inedible containers at start-up and/or ensure all end-of-night dry pick-up duties are performed accurately and in a timely manner. Assist in accurately training new hires in performing Sanitation/Tan Frock duties Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Attend to the current needs of the process by responding immediately to the expressed instructions of the Production Supervisor and/or Production Foreman General Utility - Packer Assist with Preparing / Disassembling packaging equipment for the operation, of meat-processing or for sanitation. Place each bag in the correct box, visually inspecting each bag to ensure a proper seal. Place any defects in a properly labeled rework container Assist with the collection, opening, and reuse of rework ensuring proper identification of product and line to eliminate cross-contamination and allergen concerns Assist in relieving co-workers for breaks, which may mean assisting in another position Must maintain the production area clean and in a sanitary condition. Accurately complete any assigned paperwork Assisting in accurately training new employees for Packer duties Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Attend to current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman General Utility - Palletizer Will coordinate with Foreman/ Supervisor/ Ilapak operator, and Shipping and utilize proper Product specification sheet to identify the product that is scheduled to verify and ensure pallets are being stacked correctly, (case per row, how many rows, and pallet configuration) Visually inspect cases to ensure cases are labeled and have a clear legible code date. Make required adjustments to machinery to facilitate smooth production including but not limited to changing tape, changing code dates, and communicating any all issues in a timely manner Operate a manual hand jack as needed (operate a power jack but training is required in the operation of power jacks) Facilitating and assisting in the reworking product into production in a timely manner including but not limited to; opening bags and boxes, and reworking combos Will assemble, disassemble, and change over equipment including but not limited to; film, tubes, etc., and ensure the machine is protected from the sanitation process Will communicate all equipment malfunctions in a timely manner Must maintain production area clean and in sanitary condition Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Assist with Preparing / Disassembling processing equipment for the operation, of meat-processing or for sanitation. Attend to the current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman General Utility - Box Maker Will coordinate with Foreman/ Supervisor/ Initial operator, and Shipping to identify the product that is scheduled to verify, and stage needed supplies are present for scheduled production runs Ensure that boxes, labels, and all other supplies needed for the production run and any changeover are present are staged to facilitate smooth production, communicating any issues or shortages with the supervisor and or foreman Ensure label and box match the Specification sheet, and boxes are clear of damage prior to sending to the line (including product label and/or export label) Make required adjustments to machinery to facilitate smooth production communicating any issue with the foreman and or supervisor Communicate with Foreman and or Supervisor to gain an understanding of when boxes need to be changed over and have box change completed and ready for the next production run Communicating and assisting in the transport of frozen rework to the Processing/Grinding location and ensuring the combo is accurately and clearly labeled to prevent cross-contamination or allergen concerns Will communicate all equipment malfunctions in timely manner Must maintain production/ box room area clean and in sanitary condition All assigned paperwork Will assist with normal start up or end of night duties including but not limited to: dry pick up, Tan frock duties, breaking down boxes, back staging packing materials and /or product, cleaning, covering, and/or wrapping equipment to protect from sanitation process Assist with Preparing / Disassemble processing equipment for operation, of meat- processing or for sanitation. Attend to current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman Perform other duties as assigned. Qualifications High School diploma or General Educational Development (GED) equivalent in training or experience. The ability to read, write and speak English. Must be dependable and detail-oriented. Must be able to follow directions and work under minimal supervision. Communicate effectively and clearly in a timely manner. Must be willing to work weekends and overtime hours as the company necessitates. Ability to communicate clearly, both verbally and in writing. Ability to multi-task in a fast-paced environment safely. Physical Demands and Work Environment: This job operates in a manufacturing environment. The characteristics described here are representative of those an employee encounter while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and high, precarious places. The employee is frequently exposed to colder (30 degrees) and/or warmer temperature areas. The noise level in the work environment is usually high. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands and fingers, to handle, or feel; reach with hands and arms; climb or balance, stoop, kneel, crouch, or crawl, talk or hear as defined below. Standard of 10 hours shifts and longer as the company requires Standing and/or walking constantly throughout the shift Lifting /Carrying a minimum of 50 lbs. Use both hands as necessary The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Fair Oaks Foods assures equal employment opportunity in all its hiring and employment policies and practices, which include all aspects of employment, such as recruiting, hiring, promotions, transfers, demotions, layoffs or terminations, compensation, benefits, training, company-sponsored education, social and recreational programs or events, and all other terms, conditions, and privileges of employment. These policies and practices are administered without regard to "legally protected categories" such as: race, color, religion, national origin, age, gender, disability, marital status, veteran status, sexual orientation or sexual orientation, pregnancy status or medical conditions related to childbirth, and/or any other factor protected by law. . click apply for full job details
SAFETY. TEAMWORK. CLARITY. BURNCO is looking to add skilled Diesel Mechanics to our Justin, Texas team . You're someone who drives change and takes pride in their high-quality workmanship and their ability to get things done effectively and timely. You do great work, you're a great team player and you're ready to earn some fantastic wages supporting one of the industry's top performers. Join a solid team building infrastructure that will be around for generations. What You Will Be Doing Install, maintain, and repair machinery, equipment, physical structures, plumbing and electrical systems following specifications, blue prints and manuals Perform daily visual inspections of machinery and equipment while diagnosing sounds to determine malfunctions Comply with BURNCO policies and local, state, and federal regulations including DOT and company driving requirements Communicate timely and effectively with Plant Coordinator and Production Supervisor to inform them about major mechanical problems Record service performance through data entry and maintain parts inventory Operate mobile equipment when required Perform daily preventative maintenance, record and inspection on service vehicle which includes fueling, cleaning, tire/light inspection, and fluid level maintenance Service pumps/motors Perform welding, repair and fabrication May make service calls to other BURNCO plants as needed Demonstrate good knowledge of lock out/tag out procedures Communicate with co-workers through direct hand signals and a two-way radio Assist in the training and orientation of co-workers as needed Perform general clean-up of work area and other duties as required What We Would Like From You Good working knowledge of mechanics as related to truck and general maintenance Ability to use power tools, welders, cutting torches/chains and various safety devices Demonstrated knowledge of proper mechanic/maintenance procedures such as lockout/tag outs and special work permits Must be proficient with computer and program systems Experience with Allison transmissions, Davie 4 and ESA software a plus Excellent verbal and written communication skills Ability to pass MVR (clean driving record) Commercial Driver's License with Class A or B Certification preferred Provide own personal tools up to Ability to work well with others in a team environment High School Diploma preferred 1 year of Truck Mechanic experience required Experience with concrete mixers and aggregate haul trucks preferred Must be able to diagnose engines, electrical systems, hydraulic systems, transmissions, suspensions and brakes What's In It For You In addition to competitive pay, we provide the following benefits: Excellent Benefits Program including: medical, dental, vision and employee assistance programs 4% Company Matching 401k Plan Paid Weekly Every Friday - Just Like Clockwork Holiday, Vacation, Bereavement, Jury Duty Pay - With No Waiting Periods! Voucher for safety boots and glasses each year! Since 1912, BURNCO has been supplying aggregate construction materials as a successful, family-run business based in Calgary. Over the last 110 years we have embraced innovative technology and new marketplaces while always maintaining the vision and values that were first introduced by our founder, James F. Burns. Today we continue our unwavering commitment to safety, our renewed focus on family leadership and our steady, dependable growth into the future. We look forward to having you join us on that journey. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
11/21/2026
Full time
SAFETY. TEAMWORK. CLARITY. BURNCO is looking to add skilled Diesel Mechanics to our Justin, Texas team . You're someone who drives change and takes pride in their high-quality workmanship and their ability to get things done effectively and timely. You do great work, you're a great team player and you're ready to earn some fantastic wages supporting one of the industry's top performers. Join a solid team building infrastructure that will be around for generations. What You Will Be Doing Install, maintain, and repair machinery, equipment, physical structures, plumbing and electrical systems following specifications, blue prints and manuals Perform daily visual inspections of machinery and equipment while diagnosing sounds to determine malfunctions Comply with BURNCO policies and local, state, and federal regulations including DOT and company driving requirements Communicate timely and effectively with Plant Coordinator and Production Supervisor to inform them about major mechanical problems Record service performance through data entry and maintain parts inventory Operate mobile equipment when required Perform daily preventative maintenance, record and inspection on service vehicle which includes fueling, cleaning, tire/light inspection, and fluid level maintenance Service pumps/motors Perform welding, repair and fabrication May make service calls to other BURNCO plants as needed Demonstrate good knowledge of lock out/tag out procedures Communicate with co-workers through direct hand signals and a two-way radio Assist in the training and orientation of co-workers as needed Perform general clean-up of work area and other duties as required What We Would Like From You Good working knowledge of mechanics as related to truck and general maintenance Ability to use power tools, welders, cutting torches/chains and various safety devices Demonstrated knowledge of proper mechanic/maintenance procedures such as lockout/tag outs and special work permits Must be proficient with computer and program systems Experience with Allison transmissions, Davie 4 and ESA software a plus Excellent verbal and written communication skills Ability to pass MVR (clean driving record) Commercial Driver's License with Class A or B Certification preferred Provide own personal tools up to Ability to work well with others in a team environment High School Diploma preferred 1 year of Truck Mechanic experience required Experience with concrete mixers and aggregate haul trucks preferred Must be able to diagnose engines, electrical systems, hydraulic systems, transmissions, suspensions and brakes What's In It For You In addition to competitive pay, we provide the following benefits: Excellent Benefits Program including: medical, dental, vision and employee assistance programs 4% Company Matching 401k Plan Paid Weekly Every Friday - Just Like Clockwork Holiday, Vacation, Bereavement, Jury Duty Pay - With No Waiting Periods! Voucher for safety boots and glasses each year! Since 1912, BURNCO has been supplying aggregate construction materials as a successful, family-run business based in Calgary. Over the last 110 years we have embraced innovative technology and new marketplaces while always maintaining the vision and values that were first introduced by our founder, James F. Burns. Today we continue our unwavering commitment to safety, our renewed focus on family leadership and our steady, dependable growth into the future. We look forward to having you join us on that journey. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Job Description Job Description Description: Job Title: Assistant Director, Workers Compensation and Utilization Review Company: Nexus Department: Utilization Review FLSA Status: Exempt Work Location: Remote Reports To: Director, Utilization Review Our Mission We are driven by a shared mission to improve the quality of life for all people we serve. This mission guides every aspect of our work and is embedded in the fabric of our daily operations, leadership, and service delivery. Job Summary Candidates must have direct experience in workers' compensation to be considered for this role. The Assistant Director, Utilization Review plays a pivotal role in partnering with the Director, Utilization Review to lead, supervise, and train the utilization review team. This position blends leadership with analytical expertise in the collection, aggregation, analysis, and reporting of complex production data to ensure operational excellence. The data will be used to drive smarter allocation of administrative nursing resources and fuel continuous improvement in review processes. Essential Job Functions • Works in partnership with the Director, Utilization Review to provide leadership, supervision, training, and direction for the Utilization Review Department, ensuring optimal workload distribution and team performance. • Collaborates with the Director, Utilization Review to gather and analyze data for comprehensive, individual performance evaluations for each Utilization Review Nurse. • Partners with the Director, Utilization Review to establish and monitor workflow processes and production goals. Including the collection, aggregation, analysis, and reporting of complex production metrics. • Maintains up-to-date knowledge of regulatory changes and ensures timely communications of updates to Utilization Review Nurses. • Works jointly with the Director, Utilization Review to develop strategies for nurse retention and incentive programs. • Partners with the Director, Utilization Review to design and implement educational initiatives. • Assists the Director, Utilization Review in case audits for nurses in training, offering direct guidance to promote quality standards and actionable insights for quality development. • Collaborates with the Director, Utilization Review in distributing cases during training, providing equitable opportunities for exposure to different request categories, clients, and state guidelines and requirements. • Collaborates with the Director, Utilization Review to support call coverage and address questions from nurses undergoing their initial four-week training period. • Conducts intermittent utilization and quality reviews. • Performs pre-authorization, concurrent, and retrospective reviews dealing with Medical Necessity from the Workers' Comp system, Group Health, Disability, etc. The review requires and includes evaluation of clinical data documented in laboratory reports, radiology reports, and multidisciplinary progress notes. • Perform a low to moderate amount of research on a case-by-case basis. • Produce high-quality, professional reports with impeccable grammar and spelling. • Dictates all report information. • Communicate and coordinate successfully with team members and vendors in both spoken and written formats. Requirements: • Ability to read, analyze, and interpret documents, reports, technical procedures, governmental regulations, and correspondence. • Proficient in producing clear, accurate reports, formal correspondence, and training materials for diverse audiences, with the ability to convey information effectively to management, staff, and all other stakeholders. • Proficiency in grammar, spelling, punctuation, and document formatting, with strong oral and written communication skills. • Comprehension of medical/surgical modalities and imaging techniques. • Ability to analyze clinical documentation in relation to medico-legal review. • Ability to interpret and apply appropriate guidelines to medico-legal reviews. • Ability to use logic and reasoning to determine and utilize appropriate evidence-based guidelines. • Extensive knowledge and understanding of Utilization Review. • Independently identifies and defines potential or current issues, gathers and analyzes relevant data, establishes facts, draws valid conclusions, and applies sound judgment and discretion in decision-making. Education and Experience • BSN with 1-2 years' experience in Workers' Compensation-related case management within a Managed Care setting. • Experience with various state evidence-based medicine guidelines. • Experience in a previous management role is preferred. • Proficient computer skills; able to navigate multiple software systems; knowledge of Microsoft Word, Excel, and Outlook. License and Certification • Must hold a current and unrestricted RN license. Driving Essential • No Position Demands The physical demands described are representative of those that must be met by a team member to successfully perform the essential functions of the job and are as follows. • Sit or stand to complete assigned work on a computer and with other standard office technology. An ergonomic workspace is provided for both options. • Use hands and fingers to operate a keyboard, mouse, and other applicable office equipment. • Communicate clearly and effectively in person, over the phone, and via email. • Occasionally stand, walk, reach with hands and arms, and stoop or kneel as applicable. • Occasionally lift and/or move up to 20 pounds as applicable. • Specific vision abilities required include close vision, distance vision, and the ability to focus. • The work environment is a typical office setting with low to moderate noise levels. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions. Equal Employment Opportunity (Our EEO Statement) The Company is a veteran-owned Company and provides Equal Employment Opportunities (EEO) to all Team Members and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender (including gender identity), pregnancy, childbirth, or a medical condition related to pregnancy or childbirth, national origin, age, disability, genetic information, status as a covered veteran in accordance with applicable federal, state, and local laws, or any other characteristic or class protected by law and is committed to providing equal employment opportunities. The Company complies with applicable state and local laws governing non-discrimination in employment. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, promotion, discharge, pay, fringe benefits, membership, job training, classification, and other aspects of employment. Team Members who believe they are the victims of discrimination should immediately report the concern to their Supervisor and the Human Resources Department. Discrimination and harassment will not be tolerated. We are committed to creating an inclusive environment for all Team Members and applicants. We value the unique skills and experiences that veterans bring to our team and encourage veterans to apply. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of our personnel. All company team members may be required to perform duties outside of their normal responsibilities from time to time, as needed.
11/20/2026
Full time
Job Description Job Description Description: Job Title: Assistant Director, Workers Compensation and Utilization Review Company: Nexus Department: Utilization Review FLSA Status: Exempt Work Location: Remote Reports To: Director, Utilization Review Our Mission We are driven by a shared mission to improve the quality of life for all people we serve. This mission guides every aspect of our work and is embedded in the fabric of our daily operations, leadership, and service delivery. Job Summary Candidates must have direct experience in workers' compensation to be considered for this role. The Assistant Director, Utilization Review plays a pivotal role in partnering with the Director, Utilization Review to lead, supervise, and train the utilization review team. This position blends leadership with analytical expertise in the collection, aggregation, analysis, and reporting of complex production data to ensure operational excellence. The data will be used to drive smarter allocation of administrative nursing resources and fuel continuous improvement in review processes. Essential Job Functions • Works in partnership with the Director, Utilization Review to provide leadership, supervision, training, and direction for the Utilization Review Department, ensuring optimal workload distribution and team performance. • Collaborates with the Director, Utilization Review to gather and analyze data for comprehensive, individual performance evaluations for each Utilization Review Nurse. • Partners with the Director, Utilization Review to establish and monitor workflow processes and production goals. Including the collection, aggregation, analysis, and reporting of complex production metrics. • Maintains up-to-date knowledge of regulatory changes and ensures timely communications of updates to Utilization Review Nurses. • Works jointly with the Director, Utilization Review to develop strategies for nurse retention and incentive programs. • Partners with the Director, Utilization Review to design and implement educational initiatives. • Assists the Director, Utilization Review in case audits for nurses in training, offering direct guidance to promote quality standards and actionable insights for quality development. • Collaborates with the Director, Utilization Review in distributing cases during training, providing equitable opportunities for exposure to different request categories, clients, and state guidelines and requirements. • Collaborates with the Director, Utilization Review to support call coverage and address questions from nurses undergoing their initial four-week training period. • Conducts intermittent utilization and quality reviews. • Performs pre-authorization, concurrent, and retrospective reviews dealing with Medical Necessity from the Workers' Comp system, Group Health, Disability, etc. The review requires and includes evaluation of clinical data documented in laboratory reports, radiology reports, and multidisciplinary progress notes. • Perform a low to moderate amount of research on a case-by-case basis. • Produce high-quality, professional reports with impeccable grammar and spelling. • Dictates all report information. • Communicate and coordinate successfully with team members and vendors in both spoken and written formats. Requirements: • Ability to read, analyze, and interpret documents, reports, technical procedures, governmental regulations, and correspondence. • Proficient in producing clear, accurate reports, formal correspondence, and training materials for diverse audiences, with the ability to convey information effectively to management, staff, and all other stakeholders. • Proficiency in grammar, spelling, punctuation, and document formatting, with strong oral and written communication skills. • Comprehension of medical/surgical modalities and imaging techniques. • Ability to analyze clinical documentation in relation to medico-legal review. • Ability to interpret and apply appropriate guidelines to medico-legal reviews. • Ability to use logic and reasoning to determine and utilize appropriate evidence-based guidelines. • Extensive knowledge and understanding of Utilization Review. • Independently identifies and defines potential or current issues, gathers and analyzes relevant data, establishes facts, draws valid conclusions, and applies sound judgment and discretion in decision-making. Education and Experience • BSN with 1-2 years' experience in Workers' Compensation-related case management within a Managed Care setting. • Experience with various state evidence-based medicine guidelines. • Experience in a previous management role is preferred. • Proficient computer skills; able to navigate multiple software systems; knowledge of Microsoft Word, Excel, and Outlook. License and Certification • Must hold a current and unrestricted RN license. Driving Essential • No Position Demands The physical demands described are representative of those that must be met by a team member to successfully perform the essential functions of the job and are as follows. • Sit or stand to complete assigned work on a computer and with other standard office technology. An ergonomic workspace is provided for both options. • Use hands and fingers to operate a keyboard, mouse, and other applicable office equipment. • Communicate clearly and effectively in person, over the phone, and via email. • Occasionally stand, walk, reach with hands and arms, and stoop or kneel as applicable. • Occasionally lift and/or move up to 20 pounds as applicable. • Specific vision abilities required include close vision, distance vision, and the ability to focus. • The work environment is a typical office setting with low to moderate noise levels. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions. Equal Employment Opportunity (Our EEO Statement) The Company is a veteran-owned Company and provides Equal Employment Opportunities (EEO) to all Team Members and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender (including gender identity), pregnancy, childbirth, or a medical condition related to pregnancy or childbirth, national origin, age, disability, genetic information, status as a covered veteran in accordance with applicable federal, state, and local laws, or any other characteristic or class protected by law and is committed to providing equal employment opportunities. The Company complies with applicable state and local laws governing non-discrimination in employment. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, promotion, discharge, pay, fringe benefits, membership, job training, classification, and other aspects of employment. Team Members who believe they are the victims of discrimination should immediately report the concern to their Supervisor and the Human Resources Department. Discrimination and harassment will not be tolerated. We are committed to creating an inclusive environment for all Team Members and applicants. We value the unique skills and experiences that veterans bring to our team and encourage veterans to apply. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of our personnel. All company team members may be required to perform duties outside of their normal responsibilities from time to time, as needed.
US Tsubaki Automotive, LLC
Chicopee, Massachusetts
Description: The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the "Best Value" supplier in the industry. Responsible for leading the environmental, health, and safety (EHS) function for the Chicopee and Holyoke facilities, ensuring compliance with all applicable federal, state, and local regulations. Oversee the development, implementation, and continuous improvement of Environmental Management System (EMS) and Safety Management System programs to drive regulatory compliance, operational excellence, and a strong culture of safety and environmental stewardship. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Partner with site leadership, Human Resources, and employees to foster a culture of safety, environmental stewardship, and continuous improvement. Develop, implement, and enhance EHS programs, policies, procedures, and KPI-driven initiatives to ensure regulatory compliance and operational excellence. Lead site compliance activities, including regulatory reporting, audits, inspections, and oversight of environmental, health, and safety requirements. Drive employee engagement in EHS programs through training, communication, safety committees, and site-wide initiatives. Conduct risk assessments, hazard analyses, incident investigations, and corrective action programs to reduce risk and prevent recurrence. Serve as the site subject matter expert on OSHA compliance, risk management, environmental regulations, and EHS best practices. Manage OSHA recordkeeping, workers' compensation case management, return-to-work programs, and ergonomic initiatives. Lead the Environmental Management System (EMS), maintain ISO 14001 certification, and oversee HAZMAT response preparedness and compliance. Collaborate with cross-functional teams to support sustainability objectives and implement process improvements. Oversee facility security programs, contractor safety, and third-party security services to maintain a safe and secure workplace. Act as the primary liaison with corporate leadership, regulatory agencies, insurance providers, customers, and external auditors on EHS matters. Supervise, coach, and develop EHS Specialist(s) and assigned EHS personnel, including performance management, training, goal setting, and professional development. Provide leadership and direction to the EHS team, ensuring effective execution of compliance, safety, environmental, and risk management programs. Manage team priorities, assign workloads, monitor performance, and ensure achievement of EHS objectives and regulatory requirements. Foster a culture of accountability, employee engagement, and continuous improvement through coaching and mentorship. Collaborate with EHS professionals, site leadership, and cross-functional teams to share best practices and continuously improve environmental, health, and safety performance across the organization. Requirements: Bachelor's Degree required. 7 -10 years of related work experience with in-depth knowledge of environmental, safety, occupational health policies, practices, procedures and laws and a broad understanding of EHS principles applicable to operation of the business in the manufacturing environment. CSP, ASP, CIH, CHMM, OSHA 30, ISO 14001/45001, HAZWOPER, CPR/First Aid, and other relevant EHS certifications preferred. Valid driver's license required. Must maintain all applicable certifications and licenses. Minimum 3-5 years of experience managing direct reports in an EHS, manufacturing, industrial, or related environment. Proven ability to lead, coach, develop, and hold employees accountable while fostering a culture of safety and continuous improvement. 5-7 years of EHS experience in a high-volume manufacturing environment, including management of safety and environmental programs. 2-3 years of leadership experience with direct responsibility for coaching, developing, and managing employees. Proven ability to influence and collaborate with employees and leaders at all levels of the organization. Strong analytical, problem-solving, planning, and organizational skills. Advanced knowledge of OSHA regulations and General Industry standards. Results-oriented leader with a strong focus on accountability, employee engagement, and continuous improvement. Demonstrated ability to build positive working relationships, navigate difficult situations, and foster a culture of safety and respect. Excellent written and verbal communication skills. Proficient in Microsoft Office applications, including Outlook, Excel, and PowerPoint, and EHS reporting systems Ability to manage multiple priorities and perform effectively in a fast-paced, evolving manufacturing environment. Demonstrates sound judgment, responsiveness to safety concerns, and genuine commitment to employee well-being. Strong leadership, communication, and employee development skills. Ability to analyze risks, solve problems, and drive continuous improvement initiatives. Effective project management and organizational skills with the ability to manage multiple priorities. Working knowledge of OSHA, EPA, and environmental, health, and safety management systems. Ability to work in a manufacturing environment and perform site inspections, audits, investigations, and training activities. Ability to travel between company locations and occasionally to other facilities, training events, regulatory meetings, and conferences as business needs require. Working Environment / Conditions: Works in both office and manufacturing environments with regular exposure to industrial operations. Must be able to walk production areas, conduct inspections and investigations, wear required PPE, and occasionally lift up to 25 pounds. Occasional travel and after-hours support for EHS-related matters may be required. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Compensation details: 00 Yearly Salary PIce37db06b1ff-1982
11/20/2026
Full time
Description: The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the "Best Value" supplier in the industry. Responsible for leading the environmental, health, and safety (EHS) function for the Chicopee and Holyoke facilities, ensuring compliance with all applicable federal, state, and local regulations. Oversee the development, implementation, and continuous improvement of Environmental Management System (EMS) and Safety Management System programs to drive regulatory compliance, operational excellence, and a strong culture of safety and environmental stewardship. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Partner with site leadership, Human Resources, and employees to foster a culture of safety, environmental stewardship, and continuous improvement. Develop, implement, and enhance EHS programs, policies, procedures, and KPI-driven initiatives to ensure regulatory compliance and operational excellence. Lead site compliance activities, including regulatory reporting, audits, inspections, and oversight of environmental, health, and safety requirements. Drive employee engagement in EHS programs through training, communication, safety committees, and site-wide initiatives. Conduct risk assessments, hazard analyses, incident investigations, and corrective action programs to reduce risk and prevent recurrence. Serve as the site subject matter expert on OSHA compliance, risk management, environmental regulations, and EHS best practices. Manage OSHA recordkeeping, workers' compensation case management, return-to-work programs, and ergonomic initiatives. Lead the Environmental Management System (EMS), maintain ISO 14001 certification, and oversee HAZMAT response preparedness and compliance. Collaborate with cross-functional teams to support sustainability objectives and implement process improvements. Oversee facility security programs, contractor safety, and third-party security services to maintain a safe and secure workplace. Act as the primary liaison with corporate leadership, regulatory agencies, insurance providers, customers, and external auditors on EHS matters. Supervise, coach, and develop EHS Specialist(s) and assigned EHS personnel, including performance management, training, goal setting, and professional development. Provide leadership and direction to the EHS team, ensuring effective execution of compliance, safety, environmental, and risk management programs. Manage team priorities, assign workloads, monitor performance, and ensure achievement of EHS objectives and regulatory requirements. Foster a culture of accountability, employee engagement, and continuous improvement through coaching and mentorship. Collaborate with EHS professionals, site leadership, and cross-functional teams to share best practices and continuously improve environmental, health, and safety performance across the organization. Requirements: Bachelor's Degree required. 7 -10 years of related work experience with in-depth knowledge of environmental, safety, occupational health policies, practices, procedures and laws and a broad understanding of EHS principles applicable to operation of the business in the manufacturing environment. CSP, ASP, CIH, CHMM, OSHA 30, ISO 14001/45001, HAZWOPER, CPR/First Aid, and other relevant EHS certifications preferred. Valid driver's license required. Must maintain all applicable certifications and licenses. Minimum 3-5 years of experience managing direct reports in an EHS, manufacturing, industrial, or related environment. Proven ability to lead, coach, develop, and hold employees accountable while fostering a culture of safety and continuous improvement. 5-7 years of EHS experience in a high-volume manufacturing environment, including management of safety and environmental programs. 2-3 years of leadership experience with direct responsibility for coaching, developing, and managing employees. Proven ability to influence and collaborate with employees and leaders at all levels of the organization. Strong analytical, problem-solving, planning, and organizational skills. Advanced knowledge of OSHA regulations and General Industry standards. Results-oriented leader with a strong focus on accountability, employee engagement, and continuous improvement. Demonstrated ability to build positive working relationships, navigate difficult situations, and foster a culture of safety and respect. Excellent written and verbal communication skills. Proficient in Microsoft Office applications, including Outlook, Excel, and PowerPoint, and EHS reporting systems Ability to manage multiple priorities and perform effectively in a fast-paced, evolving manufacturing environment. Demonstrates sound judgment, responsiveness to safety concerns, and genuine commitment to employee well-being. Strong leadership, communication, and employee development skills. Ability to analyze risks, solve problems, and drive continuous improvement initiatives. Effective project management and organizational skills with the ability to manage multiple priorities. Working knowledge of OSHA, EPA, and environmental, health, and safety management systems. Ability to work in a manufacturing environment and perform site inspections, audits, investigations, and training activities. Ability to travel between company locations and occasionally to other facilities, training events, regulatory meetings, and conferences as business needs require. Working Environment / Conditions: Works in both office and manufacturing environments with regular exposure to industrial operations. Must be able to walk production areas, conduct inspections and investigations, wear required PPE, and occasionally lift up to 25 pounds. Occasional travel and after-hours support for EHS-related matters may be required. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Compensation details: 00 Yearly Salary PIce37db06b1ff-1982
Job Summary Under the direction of Division HR and Plant Leadership, implement and ensure quality human resources processes, systems, products and services to managers and employees in the serviced division. The primary focus of this job is on: employee relations and policy/program development, administer HR programs in accordance with established policies and procedures including EEO and ADA compliance, training and employee development, safety and workers' compensation administration, and sourcing and selecting qualified exempt and non-exempt employees. Ensure HR operation is operating in accordance with federal, state, and local employment requirements, e.g., Fair Labor Standards Act (FLSA), Title VII, etc. Job Description MAJOR RESPONSIBILITIES: Lead implementation of people-related services, policies, and programs locally; and assist and advise plant leadership and managers on Human Resources issues. Coach employees and managers on correct interpretation and administration of Company HR policy. Interact with and support line managers, supervisors, as well as hourly employees in production, warehouse and front office. Assess the internal employee climate, counsel with managers to identify and implement actions that improve or maintain a positive employee relations environment. Support and manage recruitment and selection of candidates, recruit, interview, test and select candidates to fill key division positions including all exempt and nonexempt personnel, students and temporary employees; conduct new-employee orientations; monitor career-pathing program; write and place advertisements as needed. Administer and maintain unit affirmative action program; files EEO-1 annually; maintains other records, reports and logs to conform to EEO regulations. Represent the company, when needed, at unemployment hearings. Audit and maintain current work authorizations. Work with local managers to determine training needs. Compile data and analyze past and current year training requirements. Recommend and may deliver training programs to support employee and management development. Plan and conduct new employee orientation and follow-up to foster positive attitude toward company policies. Work with managers to develop proactive on-boarding plans that prepare employees to meet current and future business objectives. Ensure internal consistency and worth in administering job evaluations and compensation programs. Compose new and revised job profiles and recommend evaluations. Assist local managers with salary and wage administration to ensure pay consistency and equity. Assist managers with current issues with Worker's Compensation policies and procedures. Take lead role in ensuring that employees are returned to work as soon as possible. Monitor any and all restricted duty assignments. Review each incident to determine if corrective action is required. HR Management responsibilities include: Day-to-day supervision of other HR team members. May have limited budgetary responsibility and usually contributes to budgetary impact; Interpret and execute policies for HR departments/projects and develops. Provide general guidelines and parameters for staff functioning. Hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies. MINIMUM JOB REQUIREMENTS: Education: Bachelor's degree. Certification / Licensure: None Work Experience: At least 5 years human resource generalist experience. Knowledge / Skills / Abilities: Experience applying knowledge of federal and state laws related to employment and labor. Experience in reviewing and reconnecting on actions and with people to ensure the completion of the task. Experience in controlling and coordinating concurrent projects, competing priorities and critical deadlines. Experience developing and delivering presentations to various audience levels within an organization. Position requires travel up to 20% of the time for business purposes (within state and out of state). PREFERRED JOB REQUIREMENTS: Education: None Certification / Licensure: PHR or SPHR. Work Experience: At least 5 years human resource generalist experience in a manufacturing or distribution facility. Experience managing people, including hiring, developing, motivating and directing people as they work. Knowledge / Skills / Abilities: None Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization. The anticipated salary range for this position: $101,000.00 - $152,000.00 Annual The actual salary will vary based on applicant's location, education, experience, skills, and abilities. This role is bonus and/or incentive eligible. Medline will not pay less than the applicable minimum wage or salary threshold. Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For roles where employees work less than 30 hours per week, benefits include 401(k) contributions, paid time off, as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp. For a more comprehensive list of our benefits please click here. We're dedicated to creating a Medline where everyone feels they belong and can grow their career. We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best. Explore our Belonging page here. Medline Industries, LP is an equal opportunity employer. Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
11/19/2026
Full time
Job Summary Under the direction of Division HR and Plant Leadership, implement and ensure quality human resources processes, systems, products and services to managers and employees in the serviced division. The primary focus of this job is on: employee relations and policy/program development, administer HR programs in accordance with established policies and procedures including EEO and ADA compliance, training and employee development, safety and workers' compensation administration, and sourcing and selecting qualified exempt and non-exempt employees. Ensure HR operation is operating in accordance with federal, state, and local employment requirements, e.g., Fair Labor Standards Act (FLSA), Title VII, etc. Job Description MAJOR RESPONSIBILITIES: Lead implementation of people-related services, policies, and programs locally; and assist and advise plant leadership and managers on Human Resources issues. Coach employees and managers on correct interpretation and administration of Company HR policy. Interact with and support line managers, supervisors, as well as hourly employees in production, warehouse and front office. Assess the internal employee climate, counsel with managers to identify and implement actions that improve or maintain a positive employee relations environment. Support and manage recruitment and selection of candidates, recruit, interview, test and select candidates to fill key division positions including all exempt and nonexempt personnel, students and temporary employees; conduct new-employee orientations; monitor career-pathing program; write and place advertisements as needed. Administer and maintain unit affirmative action program; files EEO-1 annually; maintains other records, reports and logs to conform to EEO regulations. Represent the company, when needed, at unemployment hearings. Audit and maintain current work authorizations. Work with local managers to determine training needs. Compile data and analyze past and current year training requirements. Recommend and may deliver training programs to support employee and management development. Plan and conduct new employee orientation and follow-up to foster positive attitude toward company policies. Work with managers to develop proactive on-boarding plans that prepare employees to meet current and future business objectives. Ensure internal consistency and worth in administering job evaluations and compensation programs. Compose new and revised job profiles and recommend evaluations. Assist local managers with salary and wage administration to ensure pay consistency and equity. Assist managers with current issues with Worker's Compensation policies and procedures. Take lead role in ensuring that employees are returned to work as soon as possible. Monitor any and all restricted duty assignments. Review each incident to determine if corrective action is required. HR Management responsibilities include: Day-to-day supervision of other HR team members. May have limited budgetary responsibility and usually contributes to budgetary impact; Interpret and execute policies for HR departments/projects and develops. Provide general guidelines and parameters for staff functioning. Hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies. MINIMUM JOB REQUIREMENTS: Education: Bachelor's degree. Certification / Licensure: None Work Experience: At least 5 years human resource generalist experience. Knowledge / Skills / Abilities: Experience applying knowledge of federal and state laws related to employment and labor. Experience in reviewing and reconnecting on actions and with people to ensure the completion of the task. Experience in controlling and coordinating concurrent projects, competing priorities and critical deadlines. Experience developing and delivering presentations to various audience levels within an organization. Position requires travel up to 20% of the time for business purposes (within state and out of state). PREFERRED JOB REQUIREMENTS: Education: None Certification / Licensure: PHR or SPHR. Work Experience: At least 5 years human resource generalist experience in a manufacturing or distribution facility. Experience managing people, including hiring, developing, motivating and directing people as they work. Knowledge / Skills / Abilities: None Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization. The anticipated salary range for this position: $101,000.00 - $152,000.00 Annual The actual salary will vary based on applicant's location, education, experience, skills, and abilities. This role is bonus and/or incentive eligible. Medline will not pay less than the applicable minimum wage or salary threshold. Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average. For roles where employees work less than 30 hours per week, benefits include 401(k) contributions, paid time off, as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp. For a more comprehensive list of our benefits please click here. We're dedicated to creating a Medline where everyone feels they belong and can grow their career. We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best. Explore our Belonging page here. Medline Industries, LP is an equal opportunity employer. Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Job Description Job Description Position: Project Construction Manager POSITION SUMMARY Responsible for: Manage Project construction through all phases to ensure quality and achieve Total Customer Satisfaction Schedule employees, contractors, subcontractors, and delivery dates for materials Ensure all building codes and permitting standards Conduct walk-through inspections Communicate safety standards to laborers and sub-contractors; enforces safety regulations on ALL job sites Maintain clean and organized jobsites, company assets, company vehicles and rental company equipment Interact daily professionally with various departments of company, subcontractors, Customers, Buyers, Suppliers, Vendors, Inspectors, Owners Attend and participate and contribute to weekly, monthly, and quarterly meetings and conference calls Completes projects in line with requirements, within budget, and on time. Understand scope of work to bid, quote, follow through and fulfill Work with suppliers to know the product availability and communicate pricing and availability to the project team. Ensure margin/profit objectives are met or exceeded. Must have a regular work attendance / excellent work attendance Have a good work ethic and availability to work Ensure Technicians, Vendors, and Subcontractors follow customer requirements for job scopes Prepare documentation, correspondence, records, and paperwork Control project start, process, and close out. Open communication with management and employees. Compile cost estimates, quotes and other financial requirements Coordinate, plan, and manage schedules for contractors and subcontractors Develop construction project with architect, engineers, and trade workers Order and manage materials and equipment Provide internal reporting and projections for inventory Oversee and supervise construction project progress and provide reports on timeline, progress, and adjustments Ensure all legal requirements, building & safety codes, safety inspections, city guidelines, and local and state regulations are met Performs other assignments as assigned by Management. JOB REQUIREMENTS Bachelor's Degree in Construction Management (or related field) strongly preferred but not required Minimum of five (5) years of high-volume production construction experience Advanced training in one or more trades within the construction industry strongly preferred Knowledge of facility maintenance, commercial services, and construction systems/processes, building codes and industry standards Must be able to read blueprints to maintain quality control and inspect all aspects of construction including demolition, framing, masonry, stucco installations, glass, general, electrical, lighting, plumbing, catastrophic, emergency response etc. Excellent Customer service skills Working knowledge of Microsoft Office Suite Knowledge and use of a wide range of hand tools, power tools and equipment Ability to explain complex issues to others in a manner easily understood by both associates in the industry and customers with limited and thorough knowledge of construction processes and terminology Excellent problem/conflict resolution skills, ability to handle and diffuse difficult situations and customer concerns in a positive manner Must have construction or remodeling/renovation supervisory experience (5 year minimum) Strong working knowledge of and practical experience with a range of hand and power tools Strong planning and organizational skills, including the ability to anticipate tasks, set priorities, meet deadlines, balance various demands, and function smoothly under deadlines and priorities. COMPETENCIES To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position. Customer Service-the individual responds promptly to customer needs, solicits customer feedback to improve service and maintains confidentiality. Oral Communication-the individual speaks clearly and persuasively in positive or negative situations. Written Communication-the individual edits work for spelling and grammar and is able to read and interpret written information. Planning/Organizing -the individual prioritizes and plans work activities and uses time efficiently. Quality-the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality. Adaptability-the individual adapts to changes in the work environment, manages competing demands and is able to deal with frequent changes, delays or unexpected events. Dependability-the individual is consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance. Safety and Security-the individual observes safety and security procedures and uses equipment and materials properly. Answering Phones Mathematical Skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percentage and to draw and interpret graphs. Computer Skills To perform the job successfully, an individual should have knowledge of Microsoft Office, Work, Calendar Management, Excel, Power Point, word processing software, spreadsheet software, e-mail software and the use of the Internet and smart phone. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position, and hours and days vary from day to day. Dependent on job scopes. Other Duties Job Type: Full-time Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement As an equal opportunity employer, ACS Commercial Services, L.L.C. does not discriminate in its employment decisions on the basis of race, religion, color, national origin, gender, sexual orientation, age, military status, disability, or on any other basis that would be in violation of any applicable federal, state, or local law. Furthermore, ACS Commercial Services, L.L.C. will make reasonable accommodations for qualified individuals with known disabilities unless doing so would result in an undue hardship, safety, and/or health risk. Travel Travel is expected for this position. Must have a valid updated driver's license. Must be able to drive. Must be insurable by company current auto insurance company. Must be able to travel, fly and rent a car WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Certificates, Licenses and Registrations Valid Driver's License Reasoning Ability Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in standardized situations. Language Skills Read and comprehend simple instructions, short correspondence, and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to customers, clients, and other employees. Job Type: Full-time
11/19/2026
Full time
Job Description Job Description Position: Project Construction Manager POSITION SUMMARY Responsible for: Manage Project construction through all phases to ensure quality and achieve Total Customer Satisfaction Schedule employees, contractors, subcontractors, and delivery dates for materials Ensure all building codes and permitting standards Conduct walk-through inspections Communicate safety standards to laborers and sub-contractors; enforces safety regulations on ALL job sites Maintain clean and organized jobsites, company assets, company vehicles and rental company equipment Interact daily professionally with various departments of company, subcontractors, Customers, Buyers, Suppliers, Vendors, Inspectors, Owners Attend and participate and contribute to weekly, monthly, and quarterly meetings and conference calls Completes projects in line with requirements, within budget, and on time. Understand scope of work to bid, quote, follow through and fulfill Work with suppliers to know the product availability and communicate pricing and availability to the project team. Ensure margin/profit objectives are met or exceeded. Must have a regular work attendance / excellent work attendance Have a good work ethic and availability to work Ensure Technicians, Vendors, and Subcontractors follow customer requirements for job scopes Prepare documentation, correspondence, records, and paperwork Control project start, process, and close out. Open communication with management and employees. Compile cost estimates, quotes and other financial requirements Coordinate, plan, and manage schedules for contractors and subcontractors Develop construction project with architect, engineers, and trade workers Order and manage materials and equipment Provide internal reporting and projections for inventory Oversee and supervise construction project progress and provide reports on timeline, progress, and adjustments Ensure all legal requirements, building & safety codes, safety inspections, city guidelines, and local and state regulations are met Performs other assignments as assigned by Management. JOB REQUIREMENTS Bachelor's Degree in Construction Management (or related field) strongly preferred but not required Minimum of five (5) years of high-volume production construction experience Advanced training in one or more trades within the construction industry strongly preferred Knowledge of facility maintenance, commercial services, and construction systems/processes, building codes and industry standards Must be able to read blueprints to maintain quality control and inspect all aspects of construction including demolition, framing, masonry, stucco installations, glass, general, electrical, lighting, plumbing, catastrophic, emergency response etc. Excellent Customer service skills Working knowledge of Microsoft Office Suite Knowledge and use of a wide range of hand tools, power tools and equipment Ability to explain complex issues to others in a manner easily understood by both associates in the industry and customers with limited and thorough knowledge of construction processes and terminology Excellent problem/conflict resolution skills, ability to handle and diffuse difficult situations and customer concerns in a positive manner Must have construction or remodeling/renovation supervisory experience (5 year minimum) Strong working knowledge of and practical experience with a range of hand and power tools Strong planning and organizational skills, including the ability to anticipate tasks, set priorities, meet deadlines, balance various demands, and function smoothly under deadlines and priorities. COMPETENCIES To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position. Customer Service-the individual responds promptly to customer needs, solicits customer feedback to improve service and maintains confidentiality. Oral Communication-the individual speaks clearly and persuasively in positive or negative situations. Written Communication-the individual edits work for spelling and grammar and is able to read and interpret written information. Planning/Organizing -the individual prioritizes and plans work activities and uses time efficiently. Quality-the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality. Adaptability-the individual adapts to changes in the work environment, manages competing demands and is able to deal with frequent changes, delays or unexpected events. Dependability-the individual is consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance. Safety and Security-the individual observes safety and security procedures and uses equipment and materials properly. Answering Phones Mathematical Skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percentage and to draw and interpret graphs. Computer Skills To perform the job successfully, an individual should have knowledge of Microsoft Office, Work, Calendar Management, Excel, Power Point, word processing software, spreadsheet software, e-mail software and the use of the Internet and smart phone. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position, and hours and days vary from day to day. Dependent on job scopes. Other Duties Job Type: Full-time Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement As an equal opportunity employer, ACS Commercial Services, L.L.C. does not discriminate in its employment decisions on the basis of race, religion, color, national origin, gender, sexual orientation, age, military status, disability, or on any other basis that would be in violation of any applicable federal, state, or local law. Furthermore, ACS Commercial Services, L.L.C. will make reasonable accommodations for qualified individuals with known disabilities unless doing so would result in an undue hardship, safety, and/or health risk. Travel Travel is expected for this position. Must have a valid updated driver's license. Must be able to drive. Must be insurable by company current auto insurance company. Must be able to travel, fly and rent a car WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Certificates, Licenses and Registrations Valid Driver's License Reasoning Ability Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in standardized situations. Language Skills Read and comprehend simple instructions, short correspondence, and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to customers, clients, and other employees. Job Type: Full-time
Job Description Job Description Duration: 06 Months Summary: We are seeking a Safety Director to join our stellar team on Long Island. The Safety Director leads the company's Safety and Environmental Health (SEH) programs for the Edgewood production facilities and supports broader safety initiatives across other locations. This role identifies and reduces risk, ensures compliance with OSHA and applicable state and environmental regulations, and drives consistent safety standards, systems, and culture across production environments. Key Responsibilities: Safety Leadership and Risk Management Lead site Safety Committees and partner with leaders at all levels to identify hClientards, prioritize corrective actions, and strengthen site safety performance. Direct response to workplace emergencies, accidents, injuries, and near-misses. Lead incident investigations, determine root causes and contributing factors, implement corrective actions, ensure improvements are sustainable to prevent recurrence. Conduct regular safety and environmental health audits of buildings, equipment, tools, and work conditions; document findings, recommend corrective actions, and follow through to resolution. Provide mentorship and guidance on safety best practices across production facilities. Compliance and Environmental Programs Maintain current knowledge of OSHA, state, and other applicable SEH regulations. Develop, implement, and maintain required safety policies, written programs, procedures, and guidelines to support compliance and operational effectiveness. Build and maintain relationships with regulatory agencies, industry groups, and consultants. Respond to regulatory inquiries, complaints, and information requests; support risk management and litigation avoidance efforts. Partner with Facilities on environmental permits, reporting, and recordkeeping for air, water, solid waste, and hClientardous waste. Help ensure spills, hClientardous waste, and production by-products are managed in accordance with government regulations. Systems, Reporting, and Program Consistency Lead deployment and adoption of the company safety software platform for tracking incidents, near-misses, inspections, training and required documentation. Improve safety reporting, data collection, and related processes and tools. Collaborate with safety staff at other company locations to standardize practices where appropriate. Drive consistent implementation of corporate safety standards and programs across production facilities. Workers' Compensation and Ergonomics Partner with the workers' compensation carrier, department leaders, employees, HR, and Risk Management to support timely and accurate injury case management. Support administration of the workers' compensation program, including recordkeeping, risk assessments, ergonomic improvements, and loss control measures. Budget and Additional Expectations: Manage expenses within budget and provide input to the SEH budget. Location: Brentwood, New York Edgewood Sites and support for other U.S. locations as needed Reports To: Human Resources. Travel: Occasionally, up to 10% of the time. Travels between locations in the Edgewood campus Shift/Coverage: Day Shift, M-F OTHER SHIFT/COVERAGE: On-call support may include 24x7 coverage; evening/weekend work as needed Qualifications: Required Post-secondary education. 5+ years of related safety experience, including safety training development and delivery. Strong working knowledge of OSHA and applicable local/state safety and health regulations. Direct safety experience in a general industry or manufacturing environment. Strong analytical, problem-solving, and prioritization skills. Strong written and verbal communication skills, including the ability to lead meetings and training sessions. Ability to build effective working relationships across diverse teams and leadership levels. Proficiency with Microsoft Office applications, including Outlook, Excel, and Word. Ability to carry a cell phone and provide on-call support as required. Preferred: Bachelor's degree in safety, Industrial Hygiene, Risk Management, Environmental Health Science, Engineering, Business Management, or a related field. Advanced degree. Certified Safety Professional or Associate SP certification issued by the BCSP. 8+ years of experience in a manufacturing environment. Completion of OSHA 30-Hour General Industry course. First Aid, CPR, and emergency medical response training/certification. Work Environment and Physical Requirements Work is performed in office and production/manufacturing environments. Significant standing and walking may be required. Safety shoes are required on the production floor. Exposure to loud noise may occur; hearing protection may be required. About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. AI Statement: By applying, you acknowledge that AI-assisted tools may be used during hiring. IND01
11/17/2026
Full time
Job Description Job Description Duration: 06 Months Summary: We are seeking a Safety Director to join our stellar team on Long Island. The Safety Director leads the company's Safety and Environmental Health (SEH) programs for the Edgewood production facilities and supports broader safety initiatives across other locations. This role identifies and reduces risk, ensures compliance with OSHA and applicable state and environmental regulations, and drives consistent safety standards, systems, and culture across production environments. Key Responsibilities: Safety Leadership and Risk Management Lead site Safety Committees and partner with leaders at all levels to identify hClientards, prioritize corrective actions, and strengthen site safety performance. Direct response to workplace emergencies, accidents, injuries, and near-misses. Lead incident investigations, determine root causes and contributing factors, implement corrective actions, ensure improvements are sustainable to prevent recurrence. Conduct regular safety and environmental health audits of buildings, equipment, tools, and work conditions; document findings, recommend corrective actions, and follow through to resolution. Provide mentorship and guidance on safety best practices across production facilities. Compliance and Environmental Programs Maintain current knowledge of OSHA, state, and other applicable SEH regulations. Develop, implement, and maintain required safety policies, written programs, procedures, and guidelines to support compliance and operational effectiveness. Build and maintain relationships with regulatory agencies, industry groups, and consultants. Respond to regulatory inquiries, complaints, and information requests; support risk management and litigation avoidance efforts. Partner with Facilities on environmental permits, reporting, and recordkeeping for air, water, solid waste, and hClientardous waste. Help ensure spills, hClientardous waste, and production by-products are managed in accordance with government regulations. Systems, Reporting, and Program Consistency Lead deployment and adoption of the company safety software platform for tracking incidents, near-misses, inspections, training and required documentation. Improve safety reporting, data collection, and related processes and tools. Collaborate with safety staff at other company locations to standardize practices where appropriate. Drive consistent implementation of corporate safety standards and programs across production facilities. Workers' Compensation and Ergonomics Partner with the workers' compensation carrier, department leaders, employees, HR, and Risk Management to support timely and accurate injury case management. Support administration of the workers' compensation program, including recordkeeping, risk assessments, ergonomic improvements, and loss control measures. Budget and Additional Expectations: Manage expenses within budget and provide input to the SEH budget. Location: Brentwood, New York Edgewood Sites and support for other U.S. locations as needed Reports To: Human Resources. Travel: Occasionally, up to 10% of the time. Travels between locations in the Edgewood campus Shift/Coverage: Day Shift, M-F OTHER SHIFT/COVERAGE: On-call support may include 24x7 coverage; evening/weekend work as needed Qualifications: Required Post-secondary education. 5+ years of related safety experience, including safety training development and delivery. Strong working knowledge of OSHA and applicable local/state safety and health regulations. Direct safety experience in a general industry or manufacturing environment. Strong analytical, problem-solving, and prioritization skills. Strong written and verbal communication skills, including the ability to lead meetings and training sessions. Ability to build effective working relationships across diverse teams and leadership levels. Proficiency with Microsoft Office applications, including Outlook, Excel, and Word. Ability to carry a cell phone and provide on-call support as required. Preferred: Bachelor's degree in safety, Industrial Hygiene, Risk Management, Environmental Health Science, Engineering, Business Management, or a related field. Advanced degree. Certified Safety Professional or Associate SP certification issued by the BCSP. 8+ years of experience in a manufacturing environment. Completion of OSHA 30-Hour General Industry course. First Aid, CPR, and emergency medical response training/certification. Work Environment and Physical Requirements Work is performed in office and production/manufacturing environments. Significant standing and walking may be required. Safety shoes are required on the production floor. Exposure to loud noise may occur; hearing protection may be required. About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. AI Statement: By applying, you acknowledge that AI-assisted tools may be used during hiring. IND01
Job Description Job Description This is an exciting opportunity for a blended role for Manager, Data Science within our Data Product space. The Manager Data Science is responsible for architecting, building, and deploying production-grade machine learning models, AI solutions, and data products while leading a team of advanced data professionals. This is a highly technical, hands-on role that requires a combination of strong experience developing scalable solutions and zero to one product launch moving them from concept through production. This role requires hands-on technical contribution and is not solely an oversight function. The ideal candidate has demonstrated experience building data products and operationalizing machine learning within a cloud environment such as Azure, AWS, or similar platforms. This role requires comfort working with modern data architectures, integrating data pipelines, and managing the full lifecycle of models and AI applications. This individual has expertise in machine learning, statistical modeling, and data visualization to translate business needs into actionable insights. You will guide a team in applying best practices for model assessment, feature engineering, and scalable deployment while collaborating across business functions to ensure alignment with organizational goals. The position works closely with key business stakeholders and development teams and operates within the full software development lifecycle to deliver secure, reliable, and maintainable solutions. This individual is expected to contribute directly to technical design, development, and deployment efforts while ensuring best practices across architecture, performance, and model lifecycle management. This is a remote position. ESSENTIAL FUNCTIONS & RESPONSIBILITIES: Design, build, train, and deploy production-grade machine learning models, AI solutions and data products Collaborate with business stakeholders to identify high impact opportunities and deliver data driven solutions that support strategic goals Design and implement data visualization solutions to effectively communicate complex insights to business stakeholders Translate business requirements into actionable data science projects aligned with organizational strategy Collaborate cross-functionally to identify data sources, ensure data quality, and deploy scalable models into production environments Develop a framework to monitor model performance post-deployment and recommend adjustments to maintain accuracy and robustness Stay ahead of industry trends, emerging technologies, and best practices in data science and AI Partner with engineering teams to build and support data pipelines using technologies such as Azure Data Factory or comparable tools Work closely with development teams across the full SDLC , ensuring solutions are production-ready, secure, and maintainable Play a key role in architectural decisions, technical design reviews, governance frameworks for models and implementation strategies Communicate model behavior and results into actionable insights to business and technical stakeholders Manage a team of highly technical data and AI professionals to complete project deliverables and provide guidance on modeling techniques, feature engineering, and data analysis methods Foster a high-performing team culture through coaching, mentoring, and professional development Additional duties as assigned KNOWLEDGE & SKILLS: Strong technical expertise in machine learning and AI solution development Experience building and deploying data products in production environments Hands-on experience with cloud platforms such as Azure, AWS , or similar ecosystems Familiarity with ML lifecycle management, data pipeline orchestration, and production support Solid understanding of software engineering principles and development workflows Ability to write, review, and optimize Python and SQL code Deep understanding of Large Language Model (LLM) orchestration, specifically how to build "Agents" that can reason, use tools, and execute workflows autonomously Knowledge of Retrieval-Augmented Generation (RAG) patterns, including how to manage embeddings, vector indexing, and the "chunking" of unstructured data for AI consumption Excellent written and verbal communication skills; ability to translate complex models to business users Excellent presentation skills EDUCATION & EXPERIENCE: Bachelor's or Master's degree in a relevant field (e.g., Data Science, Information Systems, Computer Science, Business, or related discipline). Master's degree preferred 7+ years of hands-on experience in data science, ideally in a data product capacity in banking/finance, insurance or a related field 5+ years of demonstrated experience leading teams and driving enterprise level change initiatives PAY RANGE CorVel uses a market-based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range, and these adjustments would be clarified during the offer process. Pay Range: $119,127- $197,729 A list of our benefit offerings can be found on our CorVel website: CorVel Careers Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. ABOUT CORVEL: CorVel, a certified Great Place to Work Company, is a national provider of industry-leading risk management solutions for the workers' compensation, auto, health and disability management industries. CorVel was founded in 1987 and has been publicly traded on the NASDAQ stock exchange since 1991. Our continual investment in human capital and technology enable us to deliver the most innovative and integrated solutions to our clients. We are a stable and growing company with a strong, supportive culture and plenty of career advancement opportunities. Over 4,000 people working across the United States embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable.
11/17/2026
Full time
Job Description Job Description This is an exciting opportunity for a blended role for Manager, Data Science within our Data Product space. The Manager Data Science is responsible for architecting, building, and deploying production-grade machine learning models, AI solutions, and data products while leading a team of advanced data professionals. This is a highly technical, hands-on role that requires a combination of strong experience developing scalable solutions and zero to one product launch moving them from concept through production. This role requires hands-on technical contribution and is not solely an oversight function. The ideal candidate has demonstrated experience building data products and operationalizing machine learning within a cloud environment such as Azure, AWS, or similar platforms. This role requires comfort working with modern data architectures, integrating data pipelines, and managing the full lifecycle of models and AI applications. This individual has expertise in machine learning, statistical modeling, and data visualization to translate business needs into actionable insights. You will guide a team in applying best practices for model assessment, feature engineering, and scalable deployment while collaborating across business functions to ensure alignment with organizational goals. The position works closely with key business stakeholders and development teams and operates within the full software development lifecycle to deliver secure, reliable, and maintainable solutions. This individual is expected to contribute directly to technical design, development, and deployment efforts while ensuring best practices across architecture, performance, and model lifecycle management. This is a remote position. ESSENTIAL FUNCTIONS & RESPONSIBILITIES: Design, build, train, and deploy production-grade machine learning models, AI solutions and data products Collaborate with business stakeholders to identify high impact opportunities and deliver data driven solutions that support strategic goals Design and implement data visualization solutions to effectively communicate complex insights to business stakeholders Translate business requirements into actionable data science projects aligned with organizational strategy Collaborate cross-functionally to identify data sources, ensure data quality, and deploy scalable models into production environments Develop a framework to monitor model performance post-deployment and recommend adjustments to maintain accuracy and robustness Stay ahead of industry trends, emerging technologies, and best practices in data science and AI Partner with engineering teams to build and support data pipelines using technologies such as Azure Data Factory or comparable tools Work closely with development teams across the full SDLC , ensuring solutions are production-ready, secure, and maintainable Play a key role in architectural decisions, technical design reviews, governance frameworks for models and implementation strategies Communicate model behavior and results into actionable insights to business and technical stakeholders Manage a team of highly technical data and AI professionals to complete project deliverables and provide guidance on modeling techniques, feature engineering, and data analysis methods Foster a high-performing team culture through coaching, mentoring, and professional development Additional duties as assigned KNOWLEDGE & SKILLS: Strong technical expertise in machine learning and AI solution development Experience building and deploying data products in production environments Hands-on experience with cloud platforms such as Azure, AWS , or similar ecosystems Familiarity with ML lifecycle management, data pipeline orchestration, and production support Solid understanding of software engineering principles and development workflows Ability to write, review, and optimize Python and SQL code Deep understanding of Large Language Model (LLM) orchestration, specifically how to build "Agents" that can reason, use tools, and execute workflows autonomously Knowledge of Retrieval-Augmented Generation (RAG) patterns, including how to manage embeddings, vector indexing, and the "chunking" of unstructured data for AI consumption Excellent written and verbal communication skills; ability to translate complex models to business users Excellent presentation skills EDUCATION & EXPERIENCE: Bachelor's or Master's degree in a relevant field (e.g., Data Science, Information Systems, Computer Science, Business, or related discipline). Master's degree preferred 7+ years of hands-on experience in data science, ideally in a data product capacity in banking/finance, insurance or a related field 5+ years of demonstrated experience leading teams and driving enterprise level change initiatives PAY RANGE CorVel uses a market-based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range, and these adjustments would be clarified during the offer process. Pay Range: $119,127- $197,729 A list of our benefit offerings can be found on our CorVel website: CorVel Careers Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. ABOUT CORVEL: CorVel, a certified Great Place to Work Company, is a national provider of industry-leading risk management solutions for the workers' compensation, auto, health and disability management industries. CorVel was founded in 1987 and has been publicly traded on the NASDAQ stock exchange since 1991. Our continual investment in human capital and technology enable us to deliver the most innovative and integrated solutions to our clients. We are a stable and growing company with a strong, supportive culture and plenty of career advancement opportunities. Over 4,000 people working across the United States embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable.
Job Description Job Description EXECUTIVE HUMAN RESOURCE SERVICE Human Resources Consultants POSITION: Health & Safety Environmental Lead (HSE) - ENG JOB CATEGORY: Manufacturing - Production INDUSTRY: Food & Beverages LOCATION: Idaho Relocation Expense Provided JOB LINK: service/job/RYR3X756 SALARY: $105K - $120K - Based on Experience Performance-based bonus opportunity BENEFITS: Full Benefits Package Comprehensive medical, dental, and vision coverage Wellness and employee assistance programs Life and disability insurance 401(k) retirement savings plan with company participation Paid holidays, vacation, and personal leave Tuition reimbursement and professional development opportunities QUALIFICATIONS: Although, Individual are encouraged to apply, the Ideal candidate with the following experience will only be considered. Requirements for Health & Safety Environmental Lead (HSE) Bachelor's degree in Occupational Health & Safety, Environmental Science, Industrial Hygiene, Engineering, Environmental Management, or a related field preferred; equivalent experience will be considered. 5+ years of progressive Health, Safety & Environmental experience within manufacturing, food & beverage production, consumer packaged goods (CPG), industrial manufacturing, or a similarly regulated production environment. Strong working knowledge of: OSHA regulations EPA environmental requirements State environmental agencies (such as DNREC or equivalent) Industrial safety standards Experience developing, implementing, and managing comprehensive HSE programs. Experience leading incident investigations utilizing Root Cause Analysis (RCA) methodologies. Experience conducting hazard identification, Job Safety Analysis (JSA), and workplace risk assessments. Knowledge of environmental compliance including: Waste management Energy reduction initiatives Environmental reporting Sustainability programs Experience supporting ISO Management Systems, including ISO 14001 and/or ISO 45001 preferred. Experience supporting change management initiatives involving new equipment, production processes, or facility modifications. Strong knowledge of workers' compensation, injury management, and return-to-work practices is beneficial. Experience conducting safety training and employee development programs. Proficiency with Microsoft Office and HSE reporting systems. Ability to work onsite in a manufacturing environment. Preferred Certifications Certified Safety Professional (CSP) Associate Safety Professional (ASP) Certified Industrial Hygienist (CIH) OSHA 30-Hour General Industry ISO 14001 Internal Auditor ISO 45001 Internal Auditor First Aid/CPR/AED Certification Must be US Citizen or Authorized to Work in the United States No Sponsorship Available SKILLS: Skills and Abilities Required for Health & Safety Environmental Lead (HSE) Leadership Safety & Environmental Expertise Continuous Improvement Communication Project Management Technical Competencies Incident Investigation Risk Assessments OSHA Compliance EPA Compliance ISO 14001 / ISO 45001 Environmental Reporting Safety Audits Hazard Analysis Corrective Action Management Emergency Preparedness Contractor Safety Industrial Ergonomics Energy Reduction Programs Waste Reduction Programs Safety Metrics & KPI Reporting CAREER OPPORTUNITY: Executive Human Resource Service is a provider of human resource solutions for organizations of all sizes. We specialize in providing customized services to help businesses effectively manage their workforce development goals. We are privileged to present an exciting opportunity with one of the largest food & beverage manufacturers. Career Opportunity for Health & Safety Environmental Lead (HSE) Are you a proactive Health, Safety & Environmental (HSE) professional who believes that world-class manufacturing begins with a culture where every employee goes home safely every day? We are seeking an experienced Health, Safety & Environmental (HSE) Lead to champion safety excellence, environmental stewardship, and regulatory compliance within a fast-paced food and beverage manufacturing operation. This is a highly visible leadership opportunity for an influential HSE professional who thrives on driving organizational change, coaching leaders, improving processes, and creating sustainable safety cultures. This position is ideal for a candidate who enjoys partnering with operations leadership, implementing best-in-class HSE programs, and leading continuous improvement initiatives that reduce risk, strengthen compliance, and improve environmental performance. Rather than simply maintaining compliance, you will help shape the future of workplace safety by influencing behaviors, improving systems, and fostering a culture where safety is everyone's responsibility. If you're looking for an opportunity to make a measurable impact while advancing your career with an organization committed to operational excellence, continuous improvement, and employee well-being, we encourage you to explore this opportunity. As the Health, Safety & Environmental (HSE) Lead you will serve as the facility's subject matter expert for occupational health, workplace safety, environmental compliance, and regulatory initiatives. This role is responsible for developing, implementing, and continuously improving comprehensive HSE programs that support a culture of zero incidents while ensuring compliance with all federal, state, and local regulations. Working closely with plant leadership, production, engineering, maintenance, and corporate HSE teams, the HSE Lead will drive strategic safety initiatives, oversee environmental compliance programs, lead incident investigations, manage corrective actions, conduct risk assessments, and ensure regulatory readiness. The successful candidate will be a collaborative leader who can effectively influence all levels of the organization, from frontline employees to executive leadership, while promoting accountability, continuous improvement, and operational excellence. Key Responsibilities Champion a culture of Zero Harm through proactive leadership, coaching, and employee engagement. Lead the implementation and continuous improvement of all Health, Safety & Environmental programs. Ensure compliance with OSHA, EPA, environmental regulations, and internal corporate standards. Partner with plant leadership to integrate HSE initiatives into daily operations. Conduct routine facility inspections, audits, and hazard assessments. Lead incident investigations and oversee Root Cause Analysis to identify systemic improvements. Develop and monitor corrective and preventive action plans to prevent recurrence. Manage the facility's incident reporting system and maintain accurate regulatory documentation. Support engineering and operations during new equipment installations, process changes, and capital projects by ensuring HSE considerations are incorporated. Develop and deliver engaging safety training programs for employees, supervisors, and managers. Partner with Safety Committees and HSE Pillar Teams to drive employee participation and continuous improvement. Monitor environmental performance related to waste reduction, energy consumption, emissions, and sustainability initiatives. Support ISO management systems, regulatory audits, and internal compliance reviews. Analyze safety and environmental performance metrics, identify trends, and recommend strategic improvements. Build strong partnerships with operational leaders to achieve full organizational engagement in HSE initiatives. Promote continuous improvement by identifying opportunities to strengthen safety systems, environmental performance, and operational excellence. Why Professionals Are Interested in This Opportunity This role offers the opportunity to become a strategic leader within a high-performing manufacturing organization where Health, Safety & Environmental excellence is viewed as a business priority not simply a compliance function. You'll work alongside experienced operational leaders, influence organizational culture, and help shape long-term safety and sustainability initiatives that have a measurable impact on employees, operations, and business performance. . click apply for full job details
11/17/2026
Full time
Job Description Job Description EXECUTIVE HUMAN RESOURCE SERVICE Human Resources Consultants POSITION: Health & Safety Environmental Lead (HSE) - ENG JOB CATEGORY: Manufacturing - Production INDUSTRY: Food & Beverages LOCATION: Idaho Relocation Expense Provided JOB LINK: service/job/RYR3X756 SALARY: $105K - $120K - Based on Experience Performance-based bonus opportunity BENEFITS: Full Benefits Package Comprehensive medical, dental, and vision coverage Wellness and employee assistance programs Life and disability insurance 401(k) retirement savings plan with company participation Paid holidays, vacation, and personal leave Tuition reimbursement and professional development opportunities QUALIFICATIONS: Although, Individual are encouraged to apply, the Ideal candidate with the following experience will only be considered. Requirements for Health & Safety Environmental Lead (HSE) Bachelor's degree in Occupational Health & Safety, Environmental Science, Industrial Hygiene, Engineering, Environmental Management, or a related field preferred; equivalent experience will be considered. 5+ years of progressive Health, Safety & Environmental experience within manufacturing, food & beverage production, consumer packaged goods (CPG), industrial manufacturing, or a similarly regulated production environment. Strong working knowledge of: OSHA regulations EPA environmental requirements State environmental agencies (such as DNREC or equivalent) Industrial safety standards Experience developing, implementing, and managing comprehensive HSE programs. Experience leading incident investigations utilizing Root Cause Analysis (RCA) methodologies. Experience conducting hazard identification, Job Safety Analysis (JSA), and workplace risk assessments. Knowledge of environmental compliance including: Waste management Energy reduction initiatives Environmental reporting Sustainability programs Experience supporting ISO Management Systems, including ISO 14001 and/or ISO 45001 preferred. Experience supporting change management initiatives involving new equipment, production processes, or facility modifications. Strong knowledge of workers' compensation, injury management, and return-to-work practices is beneficial. Experience conducting safety training and employee development programs. Proficiency with Microsoft Office and HSE reporting systems. Ability to work onsite in a manufacturing environment. Preferred Certifications Certified Safety Professional (CSP) Associate Safety Professional (ASP) Certified Industrial Hygienist (CIH) OSHA 30-Hour General Industry ISO 14001 Internal Auditor ISO 45001 Internal Auditor First Aid/CPR/AED Certification Must be US Citizen or Authorized to Work in the United States No Sponsorship Available SKILLS: Skills and Abilities Required for Health & Safety Environmental Lead (HSE) Leadership Safety & Environmental Expertise Continuous Improvement Communication Project Management Technical Competencies Incident Investigation Risk Assessments OSHA Compliance EPA Compliance ISO 14001 / ISO 45001 Environmental Reporting Safety Audits Hazard Analysis Corrective Action Management Emergency Preparedness Contractor Safety Industrial Ergonomics Energy Reduction Programs Waste Reduction Programs Safety Metrics & KPI Reporting CAREER OPPORTUNITY: Executive Human Resource Service is a provider of human resource solutions for organizations of all sizes. We specialize in providing customized services to help businesses effectively manage their workforce development goals. We are privileged to present an exciting opportunity with one of the largest food & beverage manufacturers. Career Opportunity for Health & Safety Environmental Lead (HSE) Are you a proactive Health, Safety & Environmental (HSE) professional who believes that world-class manufacturing begins with a culture where every employee goes home safely every day? We are seeking an experienced Health, Safety & Environmental (HSE) Lead to champion safety excellence, environmental stewardship, and regulatory compliance within a fast-paced food and beverage manufacturing operation. This is a highly visible leadership opportunity for an influential HSE professional who thrives on driving organizational change, coaching leaders, improving processes, and creating sustainable safety cultures. This position is ideal for a candidate who enjoys partnering with operations leadership, implementing best-in-class HSE programs, and leading continuous improvement initiatives that reduce risk, strengthen compliance, and improve environmental performance. Rather than simply maintaining compliance, you will help shape the future of workplace safety by influencing behaviors, improving systems, and fostering a culture where safety is everyone's responsibility. If you're looking for an opportunity to make a measurable impact while advancing your career with an organization committed to operational excellence, continuous improvement, and employee well-being, we encourage you to explore this opportunity. As the Health, Safety & Environmental (HSE) Lead you will serve as the facility's subject matter expert for occupational health, workplace safety, environmental compliance, and regulatory initiatives. This role is responsible for developing, implementing, and continuously improving comprehensive HSE programs that support a culture of zero incidents while ensuring compliance with all federal, state, and local regulations. Working closely with plant leadership, production, engineering, maintenance, and corporate HSE teams, the HSE Lead will drive strategic safety initiatives, oversee environmental compliance programs, lead incident investigations, manage corrective actions, conduct risk assessments, and ensure regulatory readiness. The successful candidate will be a collaborative leader who can effectively influence all levels of the organization, from frontline employees to executive leadership, while promoting accountability, continuous improvement, and operational excellence. Key Responsibilities Champion a culture of Zero Harm through proactive leadership, coaching, and employee engagement. Lead the implementation and continuous improvement of all Health, Safety & Environmental programs. Ensure compliance with OSHA, EPA, environmental regulations, and internal corporate standards. Partner with plant leadership to integrate HSE initiatives into daily operations. Conduct routine facility inspections, audits, and hazard assessments. Lead incident investigations and oversee Root Cause Analysis to identify systemic improvements. Develop and monitor corrective and preventive action plans to prevent recurrence. Manage the facility's incident reporting system and maintain accurate regulatory documentation. Support engineering and operations during new equipment installations, process changes, and capital projects by ensuring HSE considerations are incorporated. Develop and deliver engaging safety training programs for employees, supervisors, and managers. Partner with Safety Committees and HSE Pillar Teams to drive employee participation and continuous improvement. Monitor environmental performance related to waste reduction, energy consumption, emissions, and sustainability initiatives. Support ISO management systems, regulatory audits, and internal compliance reviews. Analyze safety and environmental performance metrics, identify trends, and recommend strategic improvements. Build strong partnerships with operational leaders to achieve full organizational engagement in HSE initiatives. Promote continuous improvement by identifying opportunities to strengthen safety systems, environmental performance, and operational excellence. Why Professionals Are Interested in This Opportunity This role offers the opportunity to become a strategic leader within a high-performing manufacturing organization where Health, Safety & Environmental excellence is viewed as a business priority not simply a compliance function. You'll work alongside experienced operational leaders, influence organizational culture, and help shape long-term safety and sustainability initiatives that have a measurable impact on employees, operations, and business performance. . click apply for full job details
Job Description Job Description Position: Project Construction Manager POSITION SUMMARY Responsible for: Manage Project construction through all phases to ensure quality and achieve Total Customer Satisfaction Schedule employees, contractors, subcontractors, and delivery dates for materials Ensure all building codes and permitting standards Conduct walk-through inspections Communicate safety standards to laborers and sub-contractors; enforces safety regulations on ALL job sites Maintain clean and organized jobsites, company assets, company vehicles and rental company equipment Interact daily professionally with various departments of company, subcontractors, Customers, Buyers, Suppliers, Vendors, Inspectors, Owners Attend and participate and contribute to weekly, monthly, and quarterly meetings and conference calls Completes projects in line with requirements, within budget, and on time. Understand scope of work to bid, quote, follow through and fulfill Work with suppliers to know the product availability and communicate pricing and availability to the project team. Ensure margin/profit objectives are met or exceeded. Must have a regular work attendance / excellent work attendance Have a good work ethic and availability to work Ensure Technicians, Vendors, and Subcontractors follow customer requirements for job scopes Prepare documentation, correspondence, records, and paperwork Control project start, process, and close out. Open communication with management and employees. Compile cost estimates, quotes and other financial requirements Coordinate, plan, and manage schedules for contractors and subcontractors Develop construction project with architect, engineers, and trade workers Order and manage materials and equipment Provide internal reporting and projections for inventory Oversee and supervise construction project progress and provide reports on timeline, progress, and adjustments Ensure all legal requirements, building & safety codes, safety inspections, city guidelines, and local and state regulations are met Performs other assignments as assigned by Management. JOB REQUIREMENTS Bachelor's Degree in Construction Management (or related field) strongly preferred but not required Minimum of five (5) years of high-volume production construction experience Advanced training in one or more trades within the construction industry strongly preferred Knowledge of facility maintenance, commercial services, and construction systems/processes, building codes and industry standards Must be able to read blueprints to maintain quality control and inspect all aspects of construction including demolition, framing, masonry, stucco installations, glass, general, electrical, lighting, plumbing, catastrophic, emergency response etc. Excellent Customer service skills Working knowledge of Microsoft Office Suite Knowledge and use of a wide range of hand tools, power tools and equipment Ability to explain complex issues to others in a manner easily understood by both associates in the industry and customers with limited and thorough knowledge of construction processes and terminology Excellent problem/conflict resolution skills, ability to handle and diffuse difficult situations and customer concerns in a positive manner Must have construction or remodeling/renovation supervisory experience (5 year minimum) Strong working knowledge of and practical experience with a range of hand and power tools Strong planning and organizational skills, including the ability to anticipate tasks, set priorities, meet deadlines, balance various demands, and function smoothly under deadlines and priorities. COMPETENCIES To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position. Customer Service-the individual responds promptly to customer needs, solicits customer feedback to improve service and maintains confidentiality. Oral Communication-the individual speaks clearly and persuasively in positive or negative situations. Written Communication-the individual edits work for spelling and grammar and is able to read and interpret written information. Planning/Organizing -the individual prioritizes and plans work activities and uses time efficiently. Quality-the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality. Adaptability-the individual adapts to changes in the work environment, manages competing demands and is able to deal with frequent changes, delays or unexpected events. Dependability-the individual is consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance. Safety and Security-the individual observes safety and security procedures and uses equipment and materials properly. Answering Phones Mathematical Skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percentage and to draw and interpret graphs. Computer Skills To perform the job successfully, an individual should have knowledge of Microsoft Office, Work, Calendar Management, Excel, Power Point, word processing software, spreadsheet software, e-mail software and the use of the Internet and smart phone. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position, and hours and days vary from day to day. Dependent on job scopes. Other Duties Job Type: Full-time Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement As an equal opportunity employer, ACS Commercial Services, L.L.C. does not discriminate in its employment decisions on the basis of race, religion, color, national origin, gender, sexual orientation, age, military status, disability, or on any other basis that would be in violation of any applicable federal, state, or local law. Furthermore, ACS Commercial Services, L.L.C. will make reasonable accommodations for qualified individuals with known disabilities unless doing so would result in an undue hardship, safety, and/or health risk. Travel Travel is expected for this position. Must have a valid updated driver's license. Must be able to drive. Must be insurable by company current auto insurance company. Must be able to travel, fly and rent a car WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Certificates, Licenses and Registrations Valid Driver's License Reasoning Ability Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in standardized situations. Language Skills Read and comprehend simple instructions, short correspondence, and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to customers, clients, and other employees. Job Type: Full-time
11/16/2026
Full time
Job Description Job Description Position: Project Construction Manager POSITION SUMMARY Responsible for: Manage Project construction through all phases to ensure quality and achieve Total Customer Satisfaction Schedule employees, contractors, subcontractors, and delivery dates for materials Ensure all building codes and permitting standards Conduct walk-through inspections Communicate safety standards to laborers and sub-contractors; enforces safety regulations on ALL job sites Maintain clean and organized jobsites, company assets, company vehicles and rental company equipment Interact daily professionally with various departments of company, subcontractors, Customers, Buyers, Suppliers, Vendors, Inspectors, Owners Attend and participate and contribute to weekly, monthly, and quarterly meetings and conference calls Completes projects in line with requirements, within budget, and on time. Understand scope of work to bid, quote, follow through and fulfill Work with suppliers to know the product availability and communicate pricing and availability to the project team. Ensure margin/profit objectives are met or exceeded. Must have a regular work attendance / excellent work attendance Have a good work ethic and availability to work Ensure Technicians, Vendors, and Subcontractors follow customer requirements for job scopes Prepare documentation, correspondence, records, and paperwork Control project start, process, and close out. Open communication with management and employees. Compile cost estimates, quotes and other financial requirements Coordinate, plan, and manage schedules for contractors and subcontractors Develop construction project with architect, engineers, and trade workers Order and manage materials and equipment Provide internal reporting and projections for inventory Oversee and supervise construction project progress and provide reports on timeline, progress, and adjustments Ensure all legal requirements, building & safety codes, safety inspections, city guidelines, and local and state regulations are met Performs other assignments as assigned by Management. JOB REQUIREMENTS Bachelor's Degree in Construction Management (or related field) strongly preferred but not required Minimum of five (5) years of high-volume production construction experience Advanced training in one or more trades within the construction industry strongly preferred Knowledge of facility maintenance, commercial services, and construction systems/processes, building codes and industry standards Must be able to read blueprints to maintain quality control and inspect all aspects of construction including demolition, framing, masonry, stucco installations, glass, general, electrical, lighting, plumbing, catastrophic, emergency response etc. Excellent Customer service skills Working knowledge of Microsoft Office Suite Knowledge and use of a wide range of hand tools, power tools and equipment Ability to explain complex issues to others in a manner easily understood by both associates in the industry and customers with limited and thorough knowledge of construction processes and terminology Excellent problem/conflict resolution skills, ability to handle and diffuse difficult situations and customer concerns in a positive manner Must have construction or remodeling/renovation supervisory experience (5 year minimum) Strong working knowledge of and practical experience with a range of hand and power tools Strong planning and organizational skills, including the ability to anticipate tasks, set priorities, meet deadlines, balance various demands, and function smoothly under deadlines and priorities. COMPETENCIES To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position. Customer Service-the individual responds promptly to customer needs, solicits customer feedback to improve service and maintains confidentiality. Oral Communication-the individual speaks clearly and persuasively in positive or negative situations. Written Communication-the individual edits work for spelling and grammar and is able to read and interpret written information. Planning/Organizing -the individual prioritizes and plans work activities and uses time efficiently. Quality-the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality. Adaptability-the individual adapts to changes in the work environment, manages competing demands and is able to deal with frequent changes, delays or unexpected events. Dependability-the individual is consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance. Safety and Security-the individual observes safety and security procedures and uses equipment and materials properly. Answering Phones Mathematical Skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percentage and to draw and interpret graphs. Computer Skills To perform the job successfully, an individual should have knowledge of Microsoft Office, Work, Calendar Management, Excel, Power Point, word processing software, spreadsheet software, e-mail software and the use of the Internet and smart phone. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position, and hours and days vary from day to day. Dependent on job scopes. Other Duties Job Type: Full-time Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. AAP/EEO Statement As an equal opportunity employer, ACS Commercial Services, L.L.C. does not discriminate in its employment decisions on the basis of race, religion, color, national origin, gender, sexual orientation, age, military status, disability, or on any other basis that would be in violation of any applicable federal, state, or local law. Furthermore, ACS Commercial Services, L.L.C. will make reasonable accommodations for qualified individuals with known disabilities unless doing so would result in an undue hardship, safety, and/or health risk. Travel Travel is expected for this position. Must have a valid updated driver's license. Must be able to drive. Must be insurable by company current auto insurance company. Must be able to travel, fly and rent a car WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Certificates, Licenses and Registrations Valid Driver's License Reasoning Ability Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Deal with problems involving a few concrete variables in standardized situations. Language Skills Read and comprehend simple instructions, short correspondence, and memos. Write simple correspondence. Effectively present information in one-on-one and small group situations to customers, clients, and other employees. Job Type: Full-time
Job Description Job Description Build Your Career. Build Your Legacy. At Western Specialty Contractors, You're an Owner. For more than 110 years , Western Specialty Contractors has been building more than projects-we've been building people, careers, and communities. Founded in St. Louis and proudly employee owned through our ESOP , we are the nation's largest specialty contractor, restoring and protecting building envelopes through expertise in facades, concrete, roofing, and waterproofing. Why Western? As an employee-owned company , you're not just working for Western-you're working with Western. Every team member has a stake in our success. That ownership mindset fuels a culture where people look out for each other, take pride in their work, and know their contributions truly matter. Grow With Us With 30+ branches nationwide , Western offers opportunities to build a career that grows with you. From hands-on field experience to specialized training and leadership development, we invest in your future at every stage. Description Come work for America's Master Craftsmen in Restoration and Preservation! Western Specialty Contractors is currently looking for self-motivated, top notch individuals to help serve our customers as a Bricklayer Caulker i Memphis, TX. If you are a self-motivated individual with great work ethic and the personality to help with customer satisfaction, then we would love to meet you! As a member of the branch production team, you will be responsible for the performance of work within a particular work area and in accordance with generally accepted standards of the crafts. Assists the various craftsmen in the performance of their work within a particular construction work area and in accordance with generally accepted standards of the craft Supervises workers assigned to area of responsibility to ensure construction complies with drawings and specifications and meets quality standards Acts as the competent person on the job by identifying existing and predicable hazards which are unsanitary, hazardous or dangerous to employees and halting any operation or removes employees from environments that may be dangerous May mix cement, using hoe or concrete mixing machine Load, transport, unload, and furnish experienced craft worker with materials, tools, equipment, and supplies Clean work area and restock supplies and materials as necessary Rigging of mobile and stationery scaffolding on structures in accordance with corporate guidelines May assist in lifting, positioning, and securing of materials and workpieces during installation May perform minor maintenance or cleaning activities of journeyman's tools and equipment Perform other routine duties as directed by craft worker May remove rough or defective spots from concrete using grinder, hammer, and/or chisel. May patch holes Supervises & coordinates the activities of assigned workers, establishes and adjusts work sequences to meet construction schedules, and communicates progress to superintendent Ensures that workers know and understand the company's safety policies Maintains liaison with customer's representative and advises superintendent and/or project manager of potential problems. Requirements Workers should be able to: Follow specific directions; perform a variety of duties which may often change; work within standards of accuracy; repeat tasks of short duration according to a set procedure; evaluate information using measurable standards. Identify existing and predictable hazards to work surroundings, including working conditions that are unsanitary, hazardous or dangerous to employees. Identify existing and predictable hazards in work surroundings, including working conditions that are unsanitary, hazardous or dangerous to employees Must be able to demonstrate sufficient reading, writing and math skills to comprehend and explain company safety policies and material instruction The ability to read drawings is necessary Communicate effectively in order to supervise employees and maintain customer relations. Physically, workers must be able to: Stand or walk for long periods; lift and carry materials weighing 50 pounds or more; climb up and down ladders, scaffolds, and other objects and carry tools and equipment; and see (naturally or with correction) Abilities to work at heights, at extreme temperatures, and to wear company's safety equipment are essential. Experience in a trade or craft is required, preferably in concrete and masonry. Benefits Western offers a competitive wage. We provide medical, dental and vision insurance with the company paying over 80% of the premium. A $10,000 Life insurance and $10,000 Accidental death and dismemberment benefit is provided and is 100% company-paid. Generous 401k plan. Must work at a minimum of 30 hours per week to be eligible for benefits after 90 days of employment. Compensation for this role is determined using a variety of factors, including experience, skills, internal equity, market benchmarks, and the cost of labor in the different geographic locations where we operate. In addition to base pay, this position may also be eligible for: Beneficial ownership in the Company through Western's Employee Stock Ownership Plan (ESOP). A comprehensive benefits package, which includes health, dental, and vision coverage, a 401(k) plan with company match, paid time off, maternity leave, and additional benefits designed to support employees and their families. US Pay Range $30-$35 USD Western Specialty Contractors does not discriminate based on race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity, or any other reason prohibited by law in the provision of employment opportunities and benefits. To view Western Specialty Contractors' SMS Terms of Service, click here. To view Western Specialty Contractors' SMS Privacy Statement, click here.
11/16/2026
Full time
Job Description Job Description Build Your Career. Build Your Legacy. At Western Specialty Contractors, You're an Owner. For more than 110 years , Western Specialty Contractors has been building more than projects-we've been building people, careers, and communities. Founded in St. Louis and proudly employee owned through our ESOP , we are the nation's largest specialty contractor, restoring and protecting building envelopes through expertise in facades, concrete, roofing, and waterproofing. Why Western? As an employee-owned company , you're not just working for Western-you're working with Western. Every team member has a stake in our success. That ownership mindset fuels a culture where people look out for each other, take pride in their work, and know their contributions truly matter. Grow With Us With 30+ branches nationwide , Western offers opportunities to build a career that grows with you. From hands-on field experience to specialized training and leadership development, we invest in your future at every stage. Description Come work for America's Master Craftsmen in Restoration and Preservation! Western Specialty Contractors is currently looking for self-motivated, top notch individuals to help serve our customers as a Bricklayer Caulker i Memphis, TX. If you are a self-motivated individual with great work ethic and the personality to help with customer satisfaction, then we would love to meet you! As a member of the branch production team, you will be responsible for the performance of work within a particular work area and in accordance with generally accepted standards of the crafts. Assists the various craftsmen in the performance of their work within a particular construction work area and in accordance with generally accepted standards of the craft Supervises workers assigned to area of responsibility to ensure construction complies with drawings and specifications and meets quality standards Acts as the competent person on the job by identifying existing and predicable hazards which are unsanitary, hazardous or dangerous to employees and halting any operation or removes employees from environments that may be dangerous May mix cement, using hoe or concrete mixing machine Load, transport, unload, and furnish experienced craft worker with materials, tools, equipment, and supplies Clean work area and restock supplies and materials as necessary Rigging of mobile and stationery scaffolding on structures in accordance with corporate guidelines May assist in lifting, positioning, and securing of materials and workpieces during installation May perform minor maintenance or cleaning activities of journeyman's tools and equipment Perform other routine duties as directed by craft worker May remove rough or defective spots from concrete using grinder, hammer, and/or chisel. May patch holes Supervises & coordinates the activities of assigned workers, establishes and adjusts work sequences to meet construction schedules, and communicates progress to superintendent Ensures that workers know and understand the company's safety policies Maintains liaison with customer's representative and advises superintendent and/or project manager of potential problems. Requirements Workers should be able to: Follow specific directions; perform a variety of duties which may often change; work within standards of accuracy; repeat tasks of short duration according to a set procedure; evaluate information using measurable standards. Identify existing and predictable hazards to work surroundings, including working conditions that are unsanitary, hazardous or dangerous to employees. Identify existing and predictable hazards in work surroundings, including working conditions that are unsanitary, hazardous or dangerous to employees Must be able to demonstrate sufficient reading, writing and math skills to comprehend and explain company safety policies and material instruction The ability to read drawings is necessary Communicate effectively in order to supervise employees and maintain customer relations. Physically, workers must be able to: Stand or walk for long periods; lift and carry materials weighing 50 pounds or more; climb up and down ladders, scaffolds, and other objects and carry tools and equipment; and see (naturally or with correction) Abilities to work at heights, at extreme temperatures, and to wear company's safety equipment are essential. Experience in a trade or craft is required, preferably in concrete and masonry. Benefits Western offers a competitive wage. We provide medical, dental and vision insurance with the company paying over 80% of the premium. A $10,000 Life insurance and $10,000 Accidental death and dismemberment benefit is provided and is 100% company-paid. Generous 401k plan. Must work at a minimum of 30 hours per week to be eligible for benefits after 90 days of employment. Compensation for this role is determined using a variety of factors, including experience, skills, internal equity, market benchmarks, and the cost of labor in the different geographic locations where we operate. In addition to base pay, this position may also be eligible for: Beneficial ownership in the Company through Western's Employee Stock Ownership Plan (ESOP). A comprehensive benefits package, which includes health, dental, and vision coverage, a 401(k) plan with company match, paid time off, maternity leave, and additional benefits designed to support employees and their families. US Pay Range $30-$35 USD Western Specialty Contractors does not discriminate based on race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity, or any other reason prohibited by law in the provision of employment opportunities and benefits. To view Western Specialty Contractors' SMS Terms of Service, click here. To view Western Specialty Contractors' SMS Privacy Statement, click here.