Job Description Job Description The Opportunity NELCO Worldwide is seeking a hands-on EHS Coordinator who enjoys being where the work happens-on manufacturing floors, at active construction sites, and alongside field teams. This role is ideal for an early-career safety professional ready to build broad experience in occupational safety, industrial hygiene, employee training, and corrective-action management while receiving direction and support from experienced EHS leadership. You will help turn safety requirements into practical, visible actions that protect employees, support our customers, and strengthen NELCO's safety culture across technically complex projects. What You Will DoField and Operational Safety Conduct routine inspections of manufacturing facilities, construction projects, and field-service activities; document observations and communicate practical corrective actions. Participate in project pre-mobilization meetings and operational safety reviews. Assist project teams with Site-Specific Safety Plans (SSSPs), Job Hazard Analyses (JHAs), and task-specific risk assessments. Track corrective actions, follow up with responsible parties, and escalate overdue or high-risk items appropriately. Industrial Hygiene and Compliance Support industrial hygiene monitoring and exposure assessments, including air sampling and other environmental evaluations, under established procedures and direction. Maintain, inspect, and coordinate calibration of industrial hygiene monitoring equipment. Research and help interpret OSHA, EPA, and applicable federal, state, and local EHS requirements. Prepare clear reports summarizing inspections, monitoring results, findings, and recommended next steps. Training, Systems, and Program Support Coordinate employee safety training, certifications, and compliance records; assist with training delivery and employee communications. Support Salus, Intelex, or similar EHS platforms by maintaining data, tracking actions, monitoring training status, and assisting users. Assist with incident investigations, documentation, root-cause analysis, and corrective-action follow-up. Administer the Safety Boot and Prescription Safety Glasses programs and coordinate purchasing and inventory of PPE, EHS equipment, and safety supplies. What Success Looks Like Inspections and reports are timely, accurate, and focused on actionable solutions. Training, certification, and corrective-action records remain current and audit-ready. Employees and managers view EHS as an accessible, practical partner in safe operations. Potential hazards are identified early, communicated clearly, and followed through to closure. QualificationsRequired Associate degree, bachelor's degree, certificate, or equivalent combination of education and relevant EHS, construction, manufacturing, military, internship, or co-op experience. Working knowledge of OSHA requirements and foundational safety principles, with the ability to research unfamiliar requirements. Strong written communication, organization, follow-through, and attention to detail. Confidence communicating with employees, supervisors, project teams, and leadership in office, plant, and field environments. Proficiency with Microsoft Office, including Word, Excel, Outlook, and PowerPoint. Ability and willingness to travel approximately 25%-50%, depending on project needs, and to work at active construction and manufacturing locations. Valid driver's license and ability to meet company requirements for travel to project sites. Preferred-not required One to three years of Environmental Health & Safety, construction safety, manufacturing safety, field-service safety, or related experience; relevant internships and co-ops count. Experience with industrial hygiene sampling or monitoring equipment. OSHA 30-Hour Construction or General Industry training, or willingness to obtain it within six months of hire. Familiarity with Salus, Intelex, or another Environmental Health & Safety management system. GSP, ASP, CHST, OHSA or similar credential-or interest in pursuing a professional safety credential. Physical Requirements & Work Environment This role regularly operates computers and standard office equipment and frequently moves through manufacturing facilities and active construction sites. The employee must be able to stand, walk, climb stairs, bend, navigate uneven or active work areas, and lift and carry up to 20 pounds. Work may involve varying weather conditions, elevated noise, dust, and other controlled construction or manufacturing hazards. The employee must be able to wear required PPE, which may include safety-toe footwear, hard hat, safety glasses, high-visibility vest, hearing protection, long pants, and other project-specific protective equipment. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Why NELCO Worldwide Since 1932, NELCO Worldwide has combined engineering excellence, innovation, and quality to deliver radiation shielding and specialty construction solutions for healthcare, research, industrial, and nuclear customers. This position offers exposure to manufacturing, construction, and field operations; direct partnership with experienced leaders; and the opportunity to make a visible impact on employee safety and operational excellence. Equal Employment Opportunity NELCO Worldwide is an Equal Opportunity Employer. Employment decisions are based on qualifications, merit, and business needs without regard to race, color, religion, sex, pregnancy or related conditions, sexual orientation, gender identity or expression, national origin, ancestry, age, disability, genetic information, military or veteran status, or any other characteristic protected by applicable federal, state, or local law. Other Duties This job description is intended to describe the primary responsibilities and requirements of the position and is not an exhaustive list. Duties, responsibilities, and activities may change or be assigned at any time based on the operational needs of NELCO Worldwide.
11/17/2026
Full time
Job Description Job Description The Opportunity NELCO Worldwide is seeking a hands-on EHS Coordinator who enjoys being where the work happens-on manufacturing floors, at active construction sites, and alongside field teams. This role is ideal for an early-career safety professional ready to build broad experience in occupational safety, industrial hygiene, employee training, and corrective-action management while receiving direction and support from experienced EHS leadership. You will help turn safety requirements into practical, visible actions that protect employees, support our customers, and strengthen NELCO's safety culture across technically complex projects. What You Will DoField and Operational Safety Conduct routine inspections of manufacturing facilities, construction projects, and field-service activities; document observations and communicate practical corrective actions. Participate in project pre-mobilization meetings and operational safety reviews. Assist project teams with Site-Specific Safety Plans (SSSPs), Job Hazard Analyses (JHAs), and task-specific risk assessments. Track corrective actions, follow up with responsible parties, and escalate overdue or high-risk items appropriately. Industrial Hygiene and Compliance Support industrial hygiene monitoring and exposure assessments, including air sampling and other environmental evaluations, under established procedures and direction. Maintain, inspect, and coordinate calibration of industrial hygiene monitoring equipment. Research and help interpret OSHA, EPA, and applicable federal, state, and local EHS requirements. Prepare clear reports summarizing inspections, monitoring results, findings, and recommended next steps. Training, Systems, and Program Support Coordinate employee safety training, certifications, and compliance records; assist with training delivery and employee communications. Support Salus, Intelex, or similar EHS platforms by maintaining data, tracking actions, monitoring training status, and assisting users. Assist with incident investigations, documentation, root-cause analysis, and corrective-action follow-up. Administer the Safety Boot and Prescription Safety Glasses programs and coordinate purchasing and inventory of PPE, EHS equipment, and safety supplies. What Success Looks Like Inspections and reports are timely, accurate, and focused on actionable solutions. Training, certification, and corrective-action records remain current and audit-ready. Employees and managers view EHS as an accessible, practical partner in safe operations. Potential hazards are identified early, communicated clearly, and followed through to closure. QualificationsRequired Associate degree, bachelor's degree, certificate, or equivalent combination of education and relevant EHS, construction, manufacturing, military, internship, or co-op experience. Working knowledge of OSHA requirements and foundational safety principles, with the ability to research unfamiliar requirements. Strong written communication, organization, follow-through, and attention to detail. Confidence communicating with employees, supervisors, project teams, and leadership in office, plant, and field environments. Proficiency with Microsoft Office, including Word, Excel, Outlook, and PowerPoint. Ability and willingness to travel approximately 25%-50%, depending on project needs, and to work at active construction and manufacturing locations. Valid driver's license and ability to meet company requirements for travel to project sites. Preferred-not required One to three years of Environmental Health & Safety, construction safety, manufacturing safety, field-service safety, or related experience; relevant internships and co-ops count. Experience with industrial hygiene sampling or monitoring equipment. OSHA 30-Hour Construction or General Industry training, or willingness to obtain it within six months of hire. Familiarity with Salus, Intelex, or another Environmental Health & Safety management system. GSP, ASP, CHST, OHSA or similar credential-or interest in pursuing a professional safety credential. Physical Requirements & Work Environment This role regularly operates computers and standard office equipment and frequently moves through manufacturing facilities and active construction sites. The employee must be able to stand, walk, climb stairs, bend, navigate uneven or active work areas, and lift and carry up to 20 pounds. Work may involve varying weather conditions, elevated noise, dust, and other controlled construction or manufacturing hazards. The employee must be able to wear required PPE, which may include safety-toe footwear, hard hat, safety glasses, high-visibility vest, hearing protection, long pants, and other project-specific protective equipment. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Why NELCO Worldwide Since 1932, NELCO Worldwide has combined engineering excellence, innovation, and quality to deliver radiation shielding and specialty construction solutions for healthcare, research, industrial, and nuclear customers. This position offers exposure to manufacturing, construction, and field operations; direct partnership with experienced leaders; and the opportunity to make a visible impact on employee safety and operational excellence. Equal Employment Opportunity NELCO Worldwide is an Equal Opportunity Employer. Employment decisions are based on qualifications, merit, and business needs without regard to race, color, religion, sex, pregnancy or related conditions, sexual orientation, gender identity or expression, national origin, ancestry, age, disability, genetic information, military or veteran status, or any other characteristic protected by applicable federal, state, or local law. Other Duties This job description is intended to describe the primary responsibilities and requirements of the position and is not an exhaustive list. Duties, responsibilities, and activities may change or be assigned at any time based on the operational needs of NELCO Worldwide.
Job Description Job Description EHS & Facilities Coordinator Location: Milpitas / San Jose, California Employment Type: Part-Time, approximately 20-24 hours per week Work Arrangement: 100% On-Site About the Role We are seeking a hands-on Part-Time EHS & Facilities Coordinator to support Environmental, Health & Safety (EHS), regulatory compliance, laboratory safety, hazardous materials management, and general facility coordination at our growing deep-tech startup. This role will be responsible for day-to-day EHS coordination, documentation, inspections, training tracking, hazardous materials and waste management, and facility-related vendor coordination. The position will work closely with employees, management, external EHS consultants, vendors, inspectors, and regulatory agencies. The ideal candidate is organized, proactive, comfortable working in laboratory and manufacturing environments, and able to independently track compliance-related activities and follow-up items. Key Responsibilities EHS Training & Documentation Maintain, revise, and track EHS training materials and employee training records. Coordinate required safety training for employees and contractors. Maintain EHS procedures, inspection records, permits, Safety Data Sheets (SDS), and other compliance documentation. Help develop and update safety procedures, work instructions, signage, and emergency response information. Track required training renewals, inspections, permit deadlines, and corrective actions. Maintain organized electronic and physical EHS records. Regulatory & Agency Coordination Coordinate communications, inspections, permit activities, and follow-up actions with regulatory and municipal agencies, including, as applicable: City of Milpitas City of San Jose Santa Clara County Fire Departments Cal/OSHA U.S. EPA and California environmental agencies Wastewater authorities Hazardous materials and hazardous waste agencies Prepare and organize documentation requested for inspections or regulatory reviews. Coordinate site visits and inspections. Track findings and corrective actions resulting from inspections. Coordinate with external EHS consultants for specialized regulatory, permitting, environmental, fire-code, or occupational safety matters. Escalate significant compliance issues to management and appropriate external specialists. Hazardous Materials & Hazardous Waste Management Maintain an accurate inventory of hazardous materials used and stored at the facility. Track quantities, storage locations, and applicable storage limits. Maintain SDS and chemical inventory records. Coordinate hazardous waste pickup and disposal with approved vendors. Maintain hazardous waste manifests, waste profiles, shipping records, and related documentation. Conduct routine inspections of hazardous material and hazardous waste storage areas. Verify proper labeling, container condition, secondary containment, segregation, and storage practices. Support required hazardous materials reporting and recordkeeping, including CERS-related activities where applicable. Coordinate with vendors and consultants regarding hazardous waste characterization and disposal requirements. Laboratory & Manufacturing Safety Conduct weekly EHS inspections of laboratory, dry room, manufacturing, storage, and common areas. Identify unsafe conditions and coordinate corrective actions with responsible employees or management. Maintain a corrective-action tracking list and follow up until items are closed. Help maintain clean, organized, and safe laboratory and manufacturing spaces. Verify that emergency equipment such as eyewash stations, safety showers, fire extinguishers, spill kits, first-aid supplies, and emergency exits remain accessible and properly maintained. Monitor availability and proper use of required PPE. Support proper chemical storage, labeling, housekeeping, and waste-handling practices. Assist with incident, near-miss, and safety concern reporting and follow-up. Equipment & Process Safety Participate in safety reviews when new equipment, chemicals, or manufacturing processes are introduced. Assist with Job Hazard Analyses (JHAs) / Job Safety Analyses (JSAs). Support risk assessments and safe operating procedures for laboratory and manufacturing equipment. Coordinate required safety inspections or certifications with vendors and external specialists. Assist with contractor safety requirements for vendors performing installation, maintenance, or construction work on-site. Emergency Preparedness Maintain emergency response procedures, evacuation maps, and emergency contact information. Help coordinate emergency drills and employee safety communications. Maintain spill-response materials and emergency supplies. Support incident documentation and corrective/preventive action tracking. Coordinate with management, consultants, and emergency-service providers as needed. Facility & Vendor Coordination Coordinate facility-related service providers, including: Pest-control vendors Indoor plant service providers Waste and recycling vendors Hazardous waste vendors Fire protection and inspection vendors Schedule routine services and maintain applicable service and inspection records. Identify facility conditions that may create safety, cleanliness, or compliance concerns and coordinate appropriate repairs or follow-up. Help maintain a clean, professional, and safe workplace environment. General EHS Support Assist with ergonomic and workplace safety evaluations. Maintain PPE and safety-supply inventory and coordinate replenishment. Support contractor and visitor safety requirements. Help investigate minor incidents and near misses. Track EHS-related action items and provide periodic status updates to management. Support continuous improvement of the company's EHS programs as the company and manufacturing operations grow. Assist with additional EHS and facility-related activities as needed. Qualifications Experience in EHS, laboratory safety, environmental compliance, facilities management, chemical handling, or a related field. Experience working in a laboratory, manufacturing, semiconductor, battery, chemical, or other technical environment is preferred. Familiarity with hazardous materials and hazardous waste management. Familiarity with California workplace safety and environmental requirements is preferred. Comfortable communicating with government agencies, inspectors, vendors, employees, consultants, and management. Strong organizational, recordkeeping, and follow-up skills. Able to independently manage multiple compliance activities and deadlines. Comfortable working hands-on in laboratory and manufacturing areas. Proficient with Microsoft Office, Google Workspace, or similar business software. Preferred Experience Experience with some of the following is a plus: Cal/OSHA requirements Injury and Illness Prevention Programs (IIPP) Hazard Communication / SDS management Hazardous waste management CERS / hazardous materials reporting Fire department inspections and permitting Wastewater compliance Chemical inventory management Laboratory safety Emergency response planning Contractor safety Manufacturing facility inspections JHA / JSA preparation Incident and corrective-action tracking Work Schedule This is a part-time position of approximately 20-24 hours per week, generally expected to be performed over approximately three days per week. Some schedule flexibility may be required to support inspections, regulatory agency visits, hazardous waste pickups, equipment installations, or other time-sensitive EHS activities. Work Environment This is a 100% on-site position supporting a small, fast-growing deep-tech company. The role regularly works around laboratory and manufacturing equipment and in areas where chemicals and hazardous materials are handled. Appropriate training and PPE will be provided as required. This position is responsible for the company's routine, day-to-day EHS coordination and compliance tracking. Specialized regulatory interpretations, permitting matters, or complex environmental and safety issues may be handled in coordination with external EHS consultants and company management. Because we are a startup, responsibilities may evolve as our facilities, equipment, workforce, and manufacturing activities expand.
11/17/2026
Full time
Job Description Job Description EHS & Facilities Coordinator Location: Milpitas / San Jose, California Employment Type: Part-Time, approximately 20-24 hours per week Work Arrangement: 100% On-Site About the Role We are seeking a hands-on Part-Time EHS & Facilities Coordinator to support Environmental, Health & Safety (EHS), regulatory compliance, laboratory safety, hazardous materials management, and general facility coordination at our growing deep-tech startup. This role will be responsible for day-to-day EHS coordination, documentation, inspections, training tracking, hazardous materials and waste management, and facility-related vendor coordination. The position will work closely with employees, management, external EHS consultants, vendors, inspectors, and regulatory agencies. The ideal candidate is organized, proactive, comfortable working in laboratory and manufacturing environments, and able to independently track compliance-related activities and follow-up items. Key Responsibilities EHS Training & Documentation Maintain, revise, and track EHS training materials and employee training records. Coordinate required safety training for employees and contractors. Maintain EHS procedures, inspection records, permits, Safety Data Sheets (SDS), and other compliance documentation. Help develop and update safety procedures, work instructions, signage, and emergency response information. Track required training renewals, inspections, permit deadlines, and corrective actions. Maintain organized electronic and physical EHS records. Regulatory & Agency Coordination Coordinate communications, inspections, permit activities, and follow-up actions with regulatory and municipal agencies, including, as applicable: City of Milpitas City of San Jose Santa Clara County Fire Departments Cal/OSHA U.S. EPA and California environmental agencies Wastewater authorities Hazardous materials and hazardous waste agencies Prepare and organize documentation requested for inspections or regulatory reviews. Coordinate site visits and inspections. Track findings and corrective actions resulting from inspections. Coordinate with external EHS consultants for specialized regulatory, permitting, environmental, fire-code, or occupational safety matters. Escalate significant compliance issues to management and appropriate external specialists. Hazardous Materials & Hazardous Waste Management Maintain an accurate inventory of hazardous materials used and stored at the facility. Track quantities, storage locations, and applicable storage limits. Maintain SDS and chemical inventory records. Coordinate hazardous waste pickup and disposal with approved vendors. Maintain hazardous waste manifests, waste profiles, shipping records, and related documentation. Conduct routine inspections of hazardous material and hazardous waste storage areas. Verify proper labeling, container condition, secondary containment, segregation, and storage practices. Support required hazardous materials reporting and recordkeeping, including CERS-related activities where applicable. Coordinate with vendors and consultants regarding hazardous waste characterization and disposal requirements. Laboratory & Manufacturing Safety Conduct weekly EHS inspections of laboratory, dry room, manufacturing, storage, and common areas. Identify unsafe conditions and coordinate corrective actions with responsible employees or management. Maintain a corrective-action tracking list and follow up until items are closed. Help maintain clean, organized, and safe laboratory and manufacturing spaces. Verify that emergency equipment such as eyewash stations, safety showers, fire extinguishers, spill kits, first-aid supplies, and emergency exits remain accessible and properly maintained. Monitor availability and proper use of required PPE. Support proper chemical storage, labeling, housekeeping, and waste-handling practices. Assist with incident, near-miss, and safety concern reporting and follow-up. Equipment & Process Safety Participate in safety reviews when new equipment, chemicals, or manufacturing processes are introduced. Assist with Job Hazard Analyses (JHAs) / Job Safety Analyses (JSAs). Support risk assessments and safe operating procedures for laboratory and manufacturing equipment. Coordinate required safety inspections or certifications with vendors and external specialists. Assist with contractor safety requirements for vendors performing installation, maintenance, or construction work on-site. Emergency Preparedness Maintain emergency response procedures, evacuation maps, and emergency contact information. Help coordinate emergency drills and employee safety communications. Maintain spill-response materials and emergency supplies. Support incident documentation and corrective/preventive action tracking. Coordinate with management, consultants, and emergency-service providers as needed. Facility & Vendor Coordination Coordinate facility-related service providers, including: Pest-control vendors Indoor plant service providers Waste and recycling vendors Hazardous waste vendors Fire protection and inspection vendors Schedule routine services and maintain applicable service and inspection records. Identify facility conditions that may create safety, cleanliness, or compliance concerns and coordinate appropriate repairs or follow-up. Help maintain a clean, professional, and safe workplace environment. General EHS Support Assist with ergonomic and workplace safety evaluations. Maintain PPE and safety-supply inventory and coordinate replenishment. Support contractor and visitor safety requirements. Help investigate minor incidents and near misses. Track EHS-related action items and provide periodic status updates to management. Support continuous improvement of the company's EHS programs as the company and manufacturing operations grow. Assist with additional EHS and facility-related activities as needed. Qualifications Experience in EHS, laboratory safety, environmental compliance, facilities management, chemical handling, or a related field. Experience working in a laboratory, manufacturing, semiconductor, battery, chemical, or other technical environment is preferred. Familiarity with hazardous materials and hazardous waste management. Familiarity with California workplace safety and environmental requirements is preferred. Comfortable communicating with government agencies, inspectors, vendors, employees, consultants, and management. Strong organizational, recordkeeping, and follow-up skills. Able to independently manage multiple compliance activities and deadlines. Comfortable working hands-on in laboratory and manufacturing areas. Proficient with Microsoft Office, Google Workspace, or similar business software. Preferred Experience Experience with some of the following is a plus: Cal/OSHA requirements Injury and Illness Prevention Programs (IIPP) Hazard Communication / SDS management Hazardous waste management CERS / hazardous materials reporting Fire department inspections and permitting Wastewater compliance Chemical inventory management Laboratory safety Emergency response planning Contractor safety Manufacturing facility inspections JHA / JSA preparation Incident and corrective-action tracking Work Schedule This is a part-time position of approximately 20-24 hours per week, generally expected to be performed over approximately three days per week. Some schedule flexibility may be required to support inspections, regulatory agency visits, hazardous waste pickups, equipment installations, or other time-sensitive EHS activities. Work Environment This is a 100% on-site position supporting a small, fast-growing deep-tech company. The role regularly works around laboratory and manufacturing equipment and in areas where chemicals and hazardous materials are handled. Appropriate training and PPE will be provided as required. This position is responsible for the company's routine, day-to-day EHS coordination and compliance tracking. Specialized regulatory interpretations, permitting matters, or complex environmental and safety issues may be handled in coordination with external EHS consultants and company management. Because we are a startup, responsibilities may evolve as our facilities, equipment, workforce, and manufacturing activities expand.
Job Description Job Description Are you passionate about keeping people safe while supporting large-scale construction projects? We're seeking a Site Safety Coordinator to join a dynamic mechanical construction project in Fargo, ND. This hands-on role allows you to enforce safety programs, mentor team members, and directly contribute to a safe, efficient, and productive jobsite. This is a full-time, on-site role with six, 10 hour shifts, with the possibility of occasional overlapping afternoon/evening shifts depending on project needs. What You'll be Doing: Assist in developing and enforcing site-specific safety programs and procedures Provide technical safety guidance, coaching, and mentoring for field and office personnel Help facilitate new hire orientations and ongoing safety training Conduct daily/weekly site inspections and safety audits Support incident investigations and maintain accurate safety records Monitor compliance with state and federal safety regulations Assist with workers' compensation, insurance, and safety reporting Collaborate with the Safety Manager and project leadership to continuously improve site safety practices Perform other duties as assigned while modeling core values: Safe, Accountable, Professional, Motivated, Can Do, Curious Who We're Looking For: Entry- to intermediate-level knowledge of environmental, health, and safety standards and regulations Strong verbal and written communication skills Ability to work under pressure, meet deadlines, and maintain a positive attitude Proficiency in Microsoft Office (Word, Excel, Outlook) Exceptional work ethic and dedication to company values EHS-related education or equivalent experience: EHS undergraduate degree program or Board-certified Construction Health and Safety Technician (CHST ) or Combination of EHS minor + 2 years of hands-on construction safety experience (minimum 75% of responsibilities) OSHA 30 Certification preferred (can be completed within the first 10 days of employment if not already certified) What Our Client Offers: Hourly pay: $30 - $40/hr (significant over time pay) Full-time, long-term on-site opportunity Opportunity to grow within a supportive, safety-focused environment Exposure to large-scale mechanical construction operations and leadership teams Collaborative culture that values your expertise and contributions
11/17/2026
Full time
Job Description Job Description Are you passionate about keeping people safe while supporting large-scale construction projects? We're seeking a Site Safety Coordinator to join a dynamic mechanical construction project in Fargo, ND. This hands-on role allows you to enforce safety programs, mentor team members, and directly contribute to a safe, efficient, and productive jobsite. This is a full-time, on-site role with six, 10 hour shifts, with the possibility of occasional overlapping afternoon/evening shifts depending on project needs. What You'll be Doing: Assist in developing and enforcing site-specific safety programs and procedures Provide technical safety guidance, coaching, and mentoring for field and office personnel Help facilitate new hire orientations and ongoing safety training Conduct daily/weekly site inspections and safety audits Support incident investigations and maintain accurate safety records Monitor compliance with state and federal safety regulations Assist with workers' compensation, insurance, and safety reporting Collaborate with the Safety Manager and project leadership to continuously improve site safety practices Perform other duties as assigned while modeling core values: Safe, Accountable, Professional, Motivated, Can Do, Curious Who We're Looking For: Entry- to intermediate-level knowledge of environmental, health, and safety standards and regulations Strong verbal and written communication skills Ability to work under pressure, meet deadlines, and maintain a positive attitude Proficiency in Microsoft Office (Word, Excel, Outlook) Exceptional work ethic and dedication to company values EHS-related education or equivalent experience: EHS undergraduate degree program or Board-certified Construction Health and Safety Technician (CHST ) or Combination of EHS minor + 2 years of hands-on construction safety experience (minimum 75% of responsibilities) OSHA 30 Certification preferred (can be completed within the first 10 days of employment if not already certified) What Our Client Offers: Hourly pay: $30 - $40/hr (significant over time pay) Full-time, long-term on-site opportunity Opportunity to grow within a supportive, safety-focused environment Exposure to large-scale mechanical construction operations and leadership teams Collaborative culture that values your expertise and contributions
Job Description Job Description Description: The Environmental & Safety Training Coordinator is responsible for developing, coordinating, delivering, and tracking comprehensive environmental & safety training programs that support a safe and compliant mining operation. This position ensures compliance with OSHA, MSHA, company policies, permit requirements, regulatory and site-specific environmental and safety requirements while fostering a proactive culture throughout the organization. This role will work closely with operations, safety leadership, contractors, and employees to ensure all personnel maintain required certifications, complete mandated training, and are equipped to perform work safely. This position requires regular onsite presence at the Stibnite Gold Project near Yellow Pine, Idaho. Requirements: Essential Duties and Responsibilities: Safety & Environmental Training Administration Develop, coordinate, schedule, and track all required safety & environmental training programs for employees, contractors, visitors, and temporary personnel. Administer new hire orientation, site-specific induction training, and annual refresher programs. Ensure all personnel complete mandatory OSHA, MSHA, environmental, and company-required training prior to accessing work areas. Create and maintain training matrices to ensure workforce compliance with regulatory and operational requirements. Deliver instructor-led safety and environmental training and facilitate external training programs as needed. Coordinate specialized training programs, including confined space, lockout/tagout, hazard communication, fall protection, mobile equipment, emergency response, and task-specific training. Evaluate training effectiveness through observations, assessments, testing, and employee feedback. MSHA and OSHA Compliance Maintain compliance with all applicable MSHA, OSHA, state, federal, and company health and safety training requirements. Ensure accurate documentation of Part 46 and/or Part 48 miner training requirements, as applicable. Manage and maintain training records required for regulatory audits, inspections, and compliance reviews. Assist with preparation for MSHA inspections and audits. Monitor regulatory changes and recommend updates to site training programs and procedures. Support management in interpreting and communicating regulatory requirements to employees and contractors. Contractor Management Coordinate contractor onboarding and verification of required certifications, qualifications, and training records. Conduct contractor safety and environmental orientations and ensure compliance with site-specific requirements. Review contractor training documentation and maintain records to verify compliance prior to site access. Partner with contractor management teams to ensure alignment with company safety expectations and standards. Incident Management and Corrective Actions Participate in incident, injury, near-miss, and property damage investigations. Identify training-related root causes and assist in the development of corrective and preventive actions. Develop lessons learned communications and incorporate findings into future training programs. Track corrective actions associated with incidents and regulatory findings. Emergency Preparedness and Response Support the development and maintenance of site emergency response training programs. Coordinate emergency drills, evacuations, spill cleanups and tabletop exercises. Assist with training for emergency response teams and mine rescue personnel, where applicable. Ensure employees understand emergency and spill response procedures, reporting requirements, and response protocols. Safety and Environmental Culture and Employee Engagement Promote a positive, proactive safety and environmental culture throughout the organization. Facilitate safety meetings, toolbox talks, and awareness campaigns. Assist in developing safety recognition and engagement programs. Encourage employee participation in hazard identification, reporting, and risk reduction initiatives. Serve as a resource to employees and supervisors regarding safety and environmental training requirements and best practices. Training Systems and Record Management Maintain electronic and hard-copy training records in accordance with company policies and regulatory requirements. Manage Learning Management Systems (LMS), training databases, and compliance tracking systems. Generate reports and dashboards related to training completion, certification status, and compliance metrics. Monitor and communicate upcoming certification expirations and retraining requirements. Ensure accurate record retention and document control practices. Continuous Improvement Assess training needs and develop annual training plans that align with operational risks and business objectives. Evaluate training trends, compliance indicators, and audit findings to identify opportunities for improvement. Collaborate with Safety, Human Resources, Operations, and Environmental teams to enhance workforce competency. Benchmark training programs against industry best practices and emerging mining safety standards. Support company initiatives related to operational excellence, workforce development, and safety leadership. Qualifications: Education Bachelor's degree in Occupational Health & Safety, Environmental Health & Safety (EHS), Industrial Safety, Education, or a equivalent experience required. Experience Minimum 3 years of safety training coordination, safety administration, or safety leadership experience. Experience supporting mining, construction, heavy industrial, natural resources, or related industries preferred. Experience maintaining regulatory training records and compliance documentation. Experience delivering training to field personnel and contractors. Certifications Required: OSHA 30-Hour Construction or General Industry Certification. MSHA Instructor Certification or ability to obtain within 90 days of hire. Current valid driver's license with an acceptable driving record. First Aid/CPR/AED certification or ability to obtain upon hire. Preferred: MSHA Part 46 and Part 48 training experience. MSHA Instructor certification. OSHA Authorized Trainer designation. CHST (Construction Health and Safety Technician). STSC (Safety Trained Supervisor Construction). CSP (Certified Safety Professional) or other professional safety credential. Knowledge, Skills, and Abilities Strong knowledge of OSHA and MSHA regulations and compliance requirements. Understanding of mining operations, hazards, and industry best practices. Ability to effectively facilitate training for diverse employee groups. Strong organizational and recordkeeping skills. Proficiency with Microsoft Office Suite and Learning Management Systems (LMS). Excellent verbal, written, and interpersonal communication skills. Ability to manage multiple projects and deadlines simultaneously. Strong attention to detail and commitment to workplace safety excellence.
11/17/2026
Full time
Job Description Job Description Description: The Environmental & Safety Training Coordinator is responsible for developing, coordinating, delivering, and tracking comprehensive environmental & safety training programs that support a safe and compliant mining operation. This position ensures compliance with OSHA, MSHA, company policies, permit requirements, regulatory and site-specific environmental and safety requirements while fostering a proactive culture throughout the organization. This role will work closely with operations, safety leadership, contractors, and employees to ensure all personnel maintain required certifications, complete mandated training, and are equipped to perform work safely. This position requires regular onsite presence at the Stibnite Gold Project near Yellow Pine, Idaho. Requirements: Essential Duties and Responsibilities: Safety & Environmental Training Administration Develop, coordinate, schedule, and track all required safety & environmental training programs for employees, contractors, visitors, and temporary personnel. Administer new hire orientation, site-specific induction training, and annual refresher programs. Ensure all personnel complete mandatory OSHA, MSHA, environmental, and company-required training prior to accessing work areas. Create and maintain training matrices to ensure workforce compliance with regulatory and operational requirements. Deliver instructor-led safety and environmental training and facilitate external training programs as needed. Coordinate specialized training programs, including confined space, lockout/tagout, hazard communication, fall protection, mobile equipment, emergency response, and task-specific training. Evaluate training effectiveness through observations, assessments, testing, and employee feedback. MSHA and OSHA Compliance Maintain compliance with all applicable MSHA, OSHA, state, federal, and company health and safety training requirements. Ensure accurate documentation of Part 46 and/or Part 48 miner training requirements, as applicable. Manage and maintain training records required for regulatory audits, inspections, and compliance reviews. Assist with preparation for MSHA inspections and audits. Monitor regulatory changes and recommend updates to site training programs and procedures. Support management in interpreting and communicating regulatory requirements to employees and contractors. Contractor Management Coordinate contractor onboarding and verification of required certifications, qualifications, and training records. Conduct contractor safety and environmental orientations and ensure compliance with site-specific requirements. Review contractor training documentation and maintain records to verify compliance prior to site access. Partner with contractor management teams to ensure alignment with company safety expectations and standards. Incident Management and Corrective Actions Participate in incident, injury, near-miss, and property damage investigations. Identify training-related root causes and assist in the development of corrective and preventive actions. Develop lessons learned communications and incorporate findings into future training programs. Track corrective actions associated with incidents and regulatory findings. Emergency Preparedness and Response Support the development and maintenance of site emergency response training programs. Coordinate emergency drills, evacuations, spill cleanups and tabletop exercises. Assist with training for emergency response teams and mine rescue personnel, where applicable. Ensure employees understand emergency and spill response procedures, reporting requirements, and response protocols. Safety and Environmental Culture and Employee Engagement Promote a positive, proactive safety and environmental culture throughout the organization. Facilitate safety meetings, toolbox talks, and awareness campaigns. Assist in developing safety recognition and engagement programs. Encourage employee participation in hazard identification, reporting, and risk reduction initiatives. Serve as a resource to employees and supervisors regarding safety and environmental training requirements and best practices. Training Systems and Record Management Maintain electronic and hard-copy training records in accordance with company policies and regulatory requirements. Manage Learning Management Systems (LMS), training databases, and compliance tracking systems. Generate reports and dashboards related to training completion, certification status, and compliance metrics. Monitor and communicate upcoming certification expirations and retraining requirements. Ensure accurate record retention and document control practices. Continuous Improvement Assess training needs and develop annual training plans that align with operational risks and business objectives. Evaluate training trends, compliance indicators, and audit findings to identify opportunities for improvement. Collaborate with Safety, Human Resources, Operations, and Environmental teams to enhance workforce competency. Benchmark training programs against industry best practices and emerging mining safety standards. Support company initiatives related to operational excellence, workforce development, and safety leadership. Qualifications: Education Bachelor's degree in Occupational Health & Safety, Environmental Health & Safety (EHS), Industrial Safety, Education, or a equivalent experience required. Experience Minimum 3 years of safety training coordination, safety administration, or safety leadership experience. Experience supporting mining, construction, heavy industrial, natural resources, or related industries preferred. Experience maintaining regulatory training records and compliance documentation. Experience delivering training to field personnel and contractors. Certifications Required: OSHA 30-Hour Construction or General Industry Certification. MSHA Instructor Certification or ability to obtain within 90 days of hire. Current valid driver's license with an acceptable driving record. First Aid/CPR/AED certification or ability to obtain upon hire. Preferred: MSHA Part 46 and Part 48 training experience. MSHA Instructor certification. OSHA Authorized Trainer designation. CHST (Construction Health and Safety Technician). STSC (Safety Trained Supervisor Construction). CSP (Certified Safety Professional) or other professional safety credential. Knowledge, Skills, and Abilities Strong knowledge of OSHA and MSHA regulations and compliance requirements. Understanding of mining operations, hazards, and industry best practices. Ability to effectively facilitate training for diverse employee groups. Strong organizational and recordkeeping skills. Proficiency with Microsoft Office Suite and Learning Management Systems (LMS). Excellent verbal, written, and interpersonal communication skills. Ability to manage multiple projects and deadlines simultaneously. Strong attention to detail and commitment to workplace safety excellence.