Jobs Near Me
  • Home
  • Search Jobs
  • Register CV
  • Post a Job
  • Employer Pricing
  • Contact Us
  • Sign in
  • Sign up
  • Home
  • Search Jobs
  • Register CV
  • Post a Job
  • Employer Pricing
  • Contact Us
Sorry, that job is no longer available. Here are some results that may be similar to the job you were looking for.

11 jobs found

Email me jobs like this
Refine Search
Current Search
extrusion operator technician
SeaCa Plastic Packaging LLC
Extrusion Operator Technician - $26 - $30 Hourly Wage
SeaCa Plastic Packaging LLC Glendale, Arizona
Description: The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am C Shift: Weds/Thurs - Sat 7am -7pm Requirements: SeaCa Plastic Packaging, LLC relocated to Surprise, AZ from Fowler, CA in 2019. SeaCa Plastic Packaging, LLC is one of the companies under the umbrella of Seattle-Tacoma Box Company headquartered in Kent, WA. Currently, Seattle-Tacoma Box Company conducts manufacturing and supports assembly operations and warehouses in Alaska, Oregon, and Washington. Seattle-Tacoma Box Company is the parent company of SeaCa Packaging, Inc. operating in Dinuba and Stockton, CA, SeaCa Plastic Packaging, LLC operating in Surprise, AZ, and our most recent addition to the family, Harvest House Packaging, LLC operating in Holtville, CA. The company collectively specialize in the manufacturing and distribution of corrugated, corrugated plastic and wooden packaging used throughout the food industry. Washington, Alaska, Oregon, California, and Arizona. SeaCa Plastic Packaging, LLC is an industry pioneer in the production of plastic corrugated products used throughout the food industry. This is an operator level position for work in a manufacturing environment. Training is provided to help you grow your career. You will be joining a crew of 3-9 people working as a team to accomplish the operating goals of the shift. Bonus pay can be earned as a member of the team that achieves their manufacturing goal. Work week is either 3/4 days or 7 days every 14 calendar days, you will have 50% of your days off. Typically, you earn 74 hours of regular pay plus 6 hours overtime every 2-week rotation. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am D Shift: Weds/Thurs - Sat 7pm - 7am The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Essential Functions Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Other Responsibilities Obeys and conforms to all company rules and regulations outlined in the employee handbook. Attends ongoing training and education classes as assigned. Ensures a clean and organized work area. Possesses the math skills to calculate numbers as required to satisfy order requirements. Possesses the ability to recognize nonconforming tags and procedures. Possesses the ability to work and communicate well with co-workers. Must agree to and wear approved safety PPE. Education, Experience and Required Skills Ability to be trained or have experience to operate hollow form extrusion equipment Ability to be trained or have experience in mechanical adjustment and repair in job related activities Possesses the ability to read, speak, and understand English well. Has the ability to be trained, as well as take, and follow directions. Possesses and or will obtain (through training) certification in forklift operation. Possess a valid State Driver's License (preferred). Possesses knowledge or will learn the Quality Management System. Possesses basic computer skills. Ability to work well under pressure and meet deadlines Has the ability to read, understand and follow schedules. Ability to pass a drug screen, where applicable for position. Experience operating a forklift and attachments (preferred). Experience with uneven/difficult forklift operation (preferred). Physical Requirements Must be able to sit, walk, squat, climb, reach, turn, bend, push, pull, and lift up to 50 pounds throughout a 10-12-hour shift. Possesses the ability to withstand dusty, hot, and noisy conditions. Possesses the ability to operate a forklift in all weather conditions and situations. Compensation details: 26-30 Hourly Wage PI7feadac6adaa-6892
11/22/2026
Full time
Description: The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am C Shift: Weds/Thurs - Sat 7am -7pm Requirements: SeaCa Plastic Packaging, LLC relocated to Surprise, AZ from Fowler, CA in 2019. SeaCa Plastic Packaging, LLC is one of the companies under the umbrella of Seattle-Tacoma Box Company headquartered in Kent, WA. Currently, Seattle-Tacoma Box Company conducts manufacturing and supports assembly operations and warehouses in Alaska, Oregon, and Washington. Seattle-Tacoma Box Company is the parent company of SeaCa Packaging, Inc. operating in Dinuba and Stockton, CA, SeaCa Plastic Packaging, LLC operating in Surprise, AZ, and our most recent addition to the family, Harvest House Packaging, LLC operating in Holtville, CA. The company collectively specialize in the manufacturing and distribution of corrugated, corrugated plastic and wooden packaging used throughout the food industry. Washington, Alaska, Oregon, California, and Arizona. SeaCa Plastic Packaging, LLC is an industry pioneer in the production of plastic corrugated products used throughout the food industry. This is an operator level position for work in a manufacturing environment. Training is provided to help you grow your career. You will be joining a crew of 3-9 people working as a team to accomplish the operating goals of the shift. Bonus pay can be earned as a member of the team that achieves their manufacturing goal. Work week is either 3/4 days or 7 days every 14 calendar days, you will have 50% of your days off. Typically, you earn 74 hours of regular pay plus 6 hours overtime every 2-week rotation. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am D Shift: Weds/Thurs - Sat 7pm - 7am The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Essential Functions Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Other Responsibilities Obeys and conforms to all company rules and regulations outlined in the employee handbook. Attends ongoing training and education classes as assigned. Ensures a clean and organized work area. Possesses the math skills to calculate numbers as required to satisfy order requirements. Possesses the ability to recognize nonconforming tags and procedures. Possesses the ability to work and communicate well with co-workers. Must agree to and wear approved safety PPE. Education, Experience and Required Skills Ability to be trained or have experience to operate hollow form extrusion equipment Ability to be trained or have experience in mechanical adjustment and repair in job related activities Possesses the ability to read, speak, and understand English well. Has the ability to be trained, as well as take, and follow directions. Possesses and or will obtain (through training) certification in forklift operation. Possess a valid State Driver's License (preferred). Possesses knowledge or will learn the Quality Management System. Possesses basic computer skills. Ability to work well under pressure and meet deadlines Has the ability to read, understand and follow schedules. Ability to pass a drug screen, where applicable for position. Experience operating a forklift and attachments (preferred). Experience with uneven/difficult forklift operation (preferred). Physical Requirements Must be able to sit, walk, squat, climb, reach, turn, bend, push, pull, and lift up to 50 pounds throughout a 10-12-hour shift. Possesses the ability to withstand dusty, hot, and noisy conditions. Possesses the ability to operate a forklift in all weather conditions and situations. Compensation details: 26-30 Hourly Wage PI7feadac6adaa-6892
Energetics Technician II
Voyager Technologies Penrose, Colorado
Job Description Job Description Energetics Technician II Voyager is an innovative defense, national security and space technology company committed to advancing and delivering transformative, mission-critical solutions. We tackle the most complex challenges to unlock new frontiers for human progress, fortify national security, and protect critical assets to lead in the race for technological and operational superiority from ground to space. Forge the Future: Join Voyager Technologies The future belongs to those who build it. At Voyager Technologies, were building technologies that protect lives, expand frontiers and prepare us for whats next. And were doing that with people who are wired to solve, build, adapt and lead. These roles are not for the faint of heart. Youll help lay the foundation for humanity's future. Join a culture where innovation thrives, curiosity is rewarded, and impact is real. Were a company of doers, thinkers and builders, united by purpose and grounded in reality. If you want to put your skills to work where the stakes are real and the mission is bigger than any one person,forge the future with Voyager. The Energetics Technician II for Voyager Technologies is responsible for supporting energetic production efforts. The Energetics Technician II is a skilled, hands-on role responsible for setting up, operating, troubleshooting, and maintaining production equipment while ensuring product quality and adherence to safety procedures. This role provides technical support to energetics technician I, operators, and works closely with maintenance, engineering, and quality teams. The position reports to the Energetics Manufacturing Supervisor and is part of the Manufacturing and Operations team based in Penrose, CO/Pueblo, CO. This role is onsite based in Penrose, CO and Pueblo, CO. In this role, the essential functions are: This job requires working with explosives. Teamwork is especially important in all aspects of the job as we strive for safety. Set up, operate, and troubleshoot specialized mixing, molding, extrusion, or curing equipment for propellant and explosive formulations. Lead assembly of rocket propulsion subsystems, integrating mechanical, electrical, and energetic components. Train personnel in operating procedures, safety protocols, and technical tasks. Read and interpret engineering drawings, specifications, and material requirements to ensure accurate builds. Conduct in-process inspections and assist with root cause analysis for nonconformances in accordance with ISO 9001 and internal quality procedures. Train and guide Technician I and Energetics Operator employees in procedural compliance and best practices. Support engineering project preparation and execution, including safe loading, wiring, and monitoring of energetic test articles. Troubleshoot minor process issues and perform adjustments according to established tolerances. Interface with engineering and facilities Maintain production documentation, batch records, and quality assurance paperwork per company and regulatory standards. Basic Qualifications: Understanding of explosive safety and energetic material handling. Skill in measuring equipment, precision assembly, and process control. Proficiency in reading blueprints, schematics, and technical instructions. Strong documentation discipline to support traceability and audit readiness. Ability to operate under minimum supervision with sound judgment in safety-sensitive environments. Effective communication and teamwork across engineering, quality, and operations functions. Commitment to safety, quality, and continuous improvement; Problem-solving and root-cause analysis abilities; comfortable making decisions under time pressure. High school diploma or equivalent required; associate degree or technical training preferred. 35 years of manufacturing experience, ideally within energetics, aerospace, or defense sectors. Demonstrated proficiency with energetic materials processing or rocket motor assembly. Eligible to obtain and maintain State and Federal explosives licenses, including: Be 21 years of age or older. Pass pre-employment drug test. Pass State and Federal background checks. If your experience aligns with our basic qualifications and you are inspired by our mission, wed like to connect. If you dont see the right role right now, Join Our Talent Community and stay connected as we continue to build whats next. Preferred Qualifications: Forklift, hoist, or pressure-vessel operation experience (as applicable). Experience with automated manufacturing systems Familiarity with lean manufacturing principles, 5S, and six sigma methodologies. Ability to be a self-starter and solve complex problems from first principles with minimal supervision, both independently and as a member of a team. Conduct regular performance evaluations and recommend advancement, corrective action, or additional training as needed Supervisory Responsibility Direct daily activities of Operators and Technicians in assigned work areas. Provide input to performance evaluations as requested by Site Manager. Physical and/or Government Mandated Requirements: Ability to lift, move or carry items or equipment up to 50 pounds Ability to stand, walk, climb, balance, stoop, kneel, crouch, and crawl for extended periods in an outdoor industrial environment Ability to work in a high-hazard explosive manufacturing environment with exposure to heat, cold, noise, dust, and explosives Ability to wear required PPE, including flame-resistant clothing and other safety equipment, and comply with site-specific requirements such as end-of-day showering Ability to obtain and maintain State and Federal explosives licenses Candidates must meet all eligibility requirements to obtain and maintain applicable state and federal explosives licenses, including minimum age requirements (21 and over), a drug-free workplace in compliance with the Drug-Free Workplace Act of 1988 (41 U.S.C. ), Executive Order 12564 (Drug-Free Federal Workplace), applicable Department of Defense directives including DoD Instruction 1010.09 and DFARS and successful completion of any legally required background investigations. To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130) and the Export Administration Regulations (EAR) (15 CFR Parts 730-774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Applicants must be eligible to obtain any required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. The good faith hourly range for this role is $31.50 $31.50 at the time of this posting. Where you fall within the range depends on your experience, skills, and location. This range reflects base salary only and does not include benefits or bonus/incentive. This range may be adjusted in the future. Voyager offers a highly competitive total compensation package designed to support the well-being, growth, and success of our employees. Employees benefit from a flexible and comprehensive rewards program that supports both professional and personal well-being. Unlimited Flexible Time Off (FTO), empowering employees to take the time they need to recharge and maintain a healthy work-life balance Comprehensive medical, dental, and vision coverage for employees and their families, with a significant portion of premiums covered by the company and many benefits paid at 100% for employees Flexible, affordable gym memberships with 12,700+ options nationwide including 24 Hour Fitness, EoS Fitness, Crunch Fitness, Anytime Fitness, Blink Fitness, Chuze Fitness and more! No long term contracts and FREE on-demand workout videos before you enroll 401(k) retirement plan with a company match of up to 4% to help you build long-term financial security Company wellness programs that support physical and mental well-being Additional voluntary benefits and employee support resources The opportunity to work alongside a highly talented team in an innovative, mission driven environment Voyager is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Minority/Female/Disabled/Veteran The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice. Colorado pay range $31.50$31.50 USD Compensation details: 31.5-31.5 Hourly Wage PI90d90279ebfe-0289
11/21/2026
Full time
Job Description Job Description Energetics Technician II Voyager is an innovative defense, national security and space technology company committed to advancing and delivering transformative, mission-critical solutions. We tackle the most complex challenges to unlock new frontiers for human progress, fortify national security, and protect critical assets to lead in the race for technological and operational superiority from ground to space. Forge the Future: Join Voyager Technologies The future belongs to those who build it. At Voyager Technologies, were building technologies that protect lives, expand frontiers and prepare us for whats next. And were doing that with people who are wired to solve, build, adapt and lead. These roles are not for the faint of heart. Youll help lay the foundation for humanity's future. Join a culture where innovation thrives, curiosity is rewarded, and impact is real. Were a company of doers, thinkers and builders, united by purpose and grounded in reality. If you want to put your skills to work where the stakes are real and the mission is bigger than any one person,forge the future with Voyager. The Energetics Technician II for Voyager Technologies is responsible for supporting energetic production efforts. The Energetics Technician II is a skilled, hands-on role responsible for setting up, operating, troubleshooting, and maintaining production equipment while ensuring product quality and adherence to safety procedures. This role provides technical support to energetics technician I, operators, and works closely with maintenance, engineering, and quality teams. The position reports to the Energetics Manufacturing Supervisor and is part of the Manufacturing and Operations team based in Penrose, CO/Pueblo, CO. This role is onsite based in Penrose, CO and Pueblo, CO. In this role, the essential functions are: This job requires working with explosives. Teamwork is especially important in all aspects of the job as we strive for safety. Set up, operate, and troubleshoot specialized mixing, molding, extrusion, or curing equipment for propellant and explosive formulations. Lead assembly of rocket propulsion subsystems, integrating mechanical, electrical, and energetic components. Train personnel in operating procedures, safety protocols, and technical tasks. Read and interpret engineering drawings, specifications, and material requirements to ensure accurate builds. Conduct in-process inspections and assist with root cause analysis for nonconformances in accordance with ISO 9001 and internal quality procedures. Train and guide Technician I and Energetics Operator employees in procedural compliance and best practices. Support engineering project preparation and execution, including safe loading, wiring, and monitoring of energetic test articles. Troubleshoot minor process issues and perform adjustments according to established tolerances. Interface with engineering and facilities Maintain production documentation, batch records, and quality assurance paperwork per company and regulatory standards. Basic Qualifications: Understanding of explosive safety and energetic material handling. Skill in measuring equipment, precision assembly, and process control. Proficiency in reading blueprints, schematics, and technical instructions. Strong documentation discipline to support traceability and audit readiness. Ability to operate under minimum supervision with sound judgment in safety-sensitive environments. Effective communication and teamwork across engineering, quality, and operations functions. Commitment to safety, quality, and continuous improvement; Problem-solving and root-cause analysis abilities; comfortable making decisions under time pressure. High school diploma or equivalent required; associate degree or technical training preferred. 35 years of manufacturing experience, ideally within energetics, aerospace, or defense sectors. Demonstrated proficiency with energetic materials processing or rocket motor assembly. Eligible to obtain and maintain State and Federal explosives licenses, including: Be 21 years of age or older. Pass pre-employment drug test. Pass State and Federal background checks. If your experience aligns with our basic qualifications and you are inspired by our mission, wed like to connect. If you dont see the right role right now, Join Our Talent Community and stay connected as we continue to build whats next. Preferred Qualifications: Forklift, hoist, or pressure-vessel operation experience (as applicable). Experience with automated manufacturing systems Familiarity with lean manufacturing principles, 5S, and six sigma methodologies. Ability to be a self-starter and solve complex problems from first principles with minimal supervision, both independently and as a member of a team. Conduct regular performance evaluations and recommend advancement, corrective action, or additional training as needed Supervisory Responsibility Direct daily activities of Operators and Technicians in assigned work areas. Provide input to performance evaluations as requested by Site Manager. Physical and/or Government Mandated Requirements: Ability to lift, move or carry items or equipment up to 50 pounds Ability to stand, walk, climb, balance, stoop, kneel, crouch, and crawl for extended periods in an outdoor industrial environment Ability to work in a high-hazard explosive manufacturing environment with exposure to heat, cold, noise, dust, and explosives Ability to wear required PPE, including flame-resistant clothing and other safety equipment, and comply with site-specific requirements such as end-of-day showering Ability to obtain and maintain State and Federal explosives licenses Candidates must meet all eligibility requirements to obtain and maintain applicable state and federal explosives licenses, including minimum age requirements (21 and over), a drug-free workplace in compliance with the Drug-Free Workplace Act of 1988 (41 U.S.C. ), Executive Order 12564 (Drug-Free Federal Workplace), applicable Department of Defense directives including DoD Instruction 1010.09 and DFARS and successful completion of any legally required background investigations. To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130) and the Export Administration Regulations (EAR) (15 CFR Parts 730-774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Applicants must be eligible to obtain any required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. The good faith hourly range for this role is $31.50 $31.50 at the time of this posting. Where you fall within the range depends on your experience, skills, and location. This range reflects base salary only and does not include benefits or bonus/incentive. This range may be adjusted in the future. Voyager offers a highly competitive total compensation package designed to support the well-being, growth, and success of our employees. Employees benefit from a flexible and comprehensive rewards program that supports both professional and personal well-being. Unlimited Flexible Time Off (FTO), empowering employees to take the time they need to recharge and maintain a healthy work-life balance Comprehensive medical, dental, and vision coverage for employees and their families, with a significant portion of premiums covered by the company and many benefits paid at 100% for employees Flexible, affordable gym memberships with 12,700+ options nationwide including 24 Hour Fitness, EoS Fitness, Crunch Fitness, Anytime Fitness, Blink Fitness, Chuze Fitness and more! No long term contracts and FREE on-demand workout videos before you enroll 401(k) retirement plan with a company match of up to 4% to help you build long-term financial security Company wellness programs that support physical and mental well-being Additional voluntary benefits and employee support resources The opportunity to work alongside a highly talented team in an innovative, mission driven environment Voyager is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Minority/Female/Disabled/Veteran The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice. Colorado pay range $31.50$31.50 USD Compensation details: 31.5-31.5 Hourly Wage PI90d90279ebfe-0289
SeaCa Plastic Packaging LLC
Extrusion Operator Technician
SeaCa Plastic Packaging LLC Glendale, Arizona
Description: The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am C Shift: Weds/Thurs - Sat 7am -7pm Requirements: SeaCa Plastic Packaging, LLC relocated to Surprise, AZ from Fowler, CA in 2019. SeaCa Plastic Packaging, LLC is one of the companies under the umbrella of Seattle-Tacoma Box Company headquartered in Kent, WA. Currently, Seattle-Tacoma Box Company conducts manufacturing and supports assembly operations and warehouses in Alaska, Oregon, and Washington. Seattle-Tacoma Box Company is the parent company of SeaCa Packaging, Inc. operating in Dinuba and Stockton, CA, SeaCa Plastic Packaging, LLC operating in Surprise, AZ, and our most recent addition to the family, Harvest House Packaging, LLC operating in Holtville, CA. The company collectively specialize in the manufacturing and distribution of corrugated, corrugated plastic and wooden packaging used throughout the food industry. Washington, Alaska, Oregon, California, and Arizona. SeaCa Plastic Packaging, LLC is an industry pioneer in the production of plastic corrugated products used throughout the food industry. This is an operator level position for work in a manufacturing environment. Training is provided to help you grow your career. You will be joining a crew of 3-9 people working as a team to accomplish the operating goals of the shift. Bonus pay can be earned as a member of the team that achieves their manufacturing goal. Work week is either 3/4 days or 7 days every 14 calendar days, you will have 50% of your days off. Typically, you earn 74 hours of regular pay plus 6 hours overtime every 2-week rotation. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am D Shift: Weds/Thurs - Sat 7pm - 7am The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Essential Functions Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Other Responsibilities Obeys and conforms to all company rules and regulations outlined in the employee handbook. Attends ongoing training and education classes as assigned. Ensures a clean and organized work area. Possesses the math skills to calculate numbers as required to satisfy order requirements. Possesses the ability to recognize nonconforming tags and procedures. Possesses the ability to work and communicate well with co-workers. Must agree to and wear approved safety PPE. Education, Experience and Required Skills Ability to be trained or have experience to operate hollow form extrusion equipment Ability to be trained or have experience in mechanical adjustment and repair in job related activities Possesses the ability to read, speak, and understand English well. Has the ability to be trained, as well as take, and follow directions. Possesses and or will obtain (through training) certification in forklift operation. Possess a valid State Driver's License (preferred). Possesses knowledge or will learn the Quality Management System. Possesses basic computer skills. Ability to work well under pressure and meet deadlines Has the ability to read, understand and follow schedules. Ability to pass a drug screen, where applicable for position. Experience operating a forklift and attachments (preferred). Experience with uneven/difficult forklift operation (preferred). Physical Requirements Must be able to sit, walk, squat, climb, reach, turn, bend, push, pull, and lift up to 50 pounds throughout a 10-12-hour shift. Possesses the ability to withstand dusty, hot, and noisy conditions. Possesses the ability to operate a forklift in all weather conditions and situations. Compensation details: 26-30 Hourly Wage PI7feadac6adaa-6892
11/21/2026
Full time
Description: The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am C Shift: Weds/Thurs - Sat 7am -7pm Requirements: SeaCa Plastic Packaging, LLC relocated to Surprise, AZ from Fowler, CA in 2019. SeaCa Plastic Packaging, LLC is one of the companies under the umbrella of Seattle-Tacoma Box Company headquartered in Kent, WA. Currently, Seattle-Tacoma Box Company conducts manufacturing and supports assembly operations and warehouses in Alaska, Oregon, and Washington. Seattle-Tacoma Box Company is the parent company of SeaCa Packaging, Inc. operating in Dinuba and Stockton, CA, SeaCa Plastic Packaging, LLC operating in Surprise, AZ, and our most recent addition to the family, Harvest House Packaging, LLC operating in Holtville, CA. The company collectively specialize in the manufacturing and distribution of corrugated, corrugated plastic and wooden packaging used throughout the food industry. Washington, Alaska, Oregon, California, and Arizona. SeaCa Plastic Packaging, LLC is an industry pioneer in the production of plastic corrugated products used throughout the food industry. This is an operator level position for work in a manufacturing environment. Training is provided to help you grow your career. You will be joining a crew of 3-9 people working as a team to accomplish the operating goals of the shift. Bonus pay can be earned as a member of the team that achieves their manufacturing goal. Work week is either 3/4 days or 7 days every 14 calendar days, you will have 50% of your days off. Typically, you earn 74 hours of regular pay plus 6 hours overtime every 2-week rotation. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am D Shift: Weds/Thurs - Sat 7pm - 7am The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Essential Functions Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Other Responsibilities Obeys and conforms to all company rules and regulations outlined in the employee handbook. Attends ongoing training and education classes as assigned. Ensures a clean and organized work area. Possesses the math skills to calculate numbers as required to satisfy order requirements. Possesses the ability to recognize nonconforming tags and procedures. Possesses the ability to work and communicate well with co-workers. Must agree to and wear approved safety PPE. Education, Experience and Required Skills Ability to be trained or have experience to operate hollow form extrusion equipment Ability to be trained or have experience in mechanical adjustment and repair in job related activities Possesses the ability to read, speak, and understand English well. Has the ability to be trained, as well as take, and follow directions. Possesses and or will obtain (through training) certification in forklift operation. Possess a valid State Driver's License (preferred). Possesses knowledge or will learn the Quality Management System. Possesses basic computer skills. Ability to work well under pressure and meet deadlines Has the ability to read, understand and follow schedules. Ability to pass a drug screen, where applicable for position. Experience operating a forklift and attachments (preferred). Experience with uneven/difficult forklift operation (preferred). Physical Requirements Must be able to sit, walk, squat, climb, reach, turn, bend, push, pull, and lift up to 50 pounds throughout a 10-12-hour shift. Possesses the ability to withstand dusty, hot, and noisy conditions. Possesses the ability to operate a forklift in all weather conditions and situations. Compensation details: 26-30 Hourly Wage PI7feadac6adaa-6892
SeaCa Plastic Packaging LLC
Extrusion Operator Technician
SeaCa Plastic Packaging LLC Surprise, Arizona
Description: The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am C Shift: Weds/Thurs - Sat 7am -7pm Requirements: SeaCa Plastic Packaging, LLC relocated to Surprise, AZ from Fowler, CA in 2019. SeaCa Plastic Packaging, LLC is one of the companies under the umbrella of Seattle-Tacoma Box Company headquartered in Kent, WA. Currently, Seattle-Tacoma Box Company conducts manufacturing and supports assembly operations and warehouses in Alaska, Oregon, and Washington. Seattle-Tacoma Box Company is the parent company of SeaCa Packaging, Inc. operating in Dinuba and Stockton, CA, SeaCa Plastic Packaging, LLC operating in Surprise, AZ, and our most recent addition to the family, Harvest House Packaging, LLC operating in Holtville, CA. The company collectively specialize in the manufacturing and distribution of corrugated, corrugated plastic and wooden packaging used throughout the food industry. Washington, Alaska, Oregon, California, and Arizona. SeaCa Plastic Packaging, LLC is an industry pioneer in the production of plastic corrugated products used throughout the food industry. This is an operator level position for work in a manufacturing environment. Training is provided to help you grow your career. You will be joining a crew of 3-9 people working as a team to accomplish the operating goals of the shift. Bonus pay can be earned as a member of the team that achieves their manufacturing goal. Work week is either 3/4 days or 7 days every 14 calendar days, you will have 50% of your days off. Typically, you earn 74 hours of regular pay plus 6 hours overtime every 2-week rotation. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am D Shift: Weds/Thurs - Sat 7pm - 7am The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Essential Functions Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Other Responsibilities Obeys and conforms to all company rules and regulations outlined in the employee handbook. Attends ongoing training and education classes as assigned. Ensures a clean and organized work area. Possesses the math skills to calculate numbers as required to satisfy order requirements. Possesses the ability to recognize nonconforming tags and procedures. Possesses the ability to work and communicate well with co-workers. Must agree to and wear approved safety PPE. Education, Experience and Required Skills Ability to be trained or have experience to operate hollow form extrusion equipment Ability to be trained or have experience in mechanical adjustment and repair in job related activities Possesses the ability to read, speak, and understand English well. Has the ability to be trained, as well as take, and follow directions. Possesses and or will obtain (through training) certification in forklift operation. Possess a valid State Driver's License (preferred). Possesses knowledge or will learn the Quality Management System. Possesses basic computer skills. Ability to work well under pressure and meet deadlines Has the ability to read, understand and follow schedules. Ability to pass a drug screen, where applicable for position. Experience operating a forklift and attachments (preferred). Experience with uneven/difficult forklift operation (preferred). Physical Requirements Must be able to sit, walk, squat, climb, reach, turn, bend, push, pull, and lift up to 50 pounds throughout a 10-12-hour shift. Possesses the ability to withstand dusty, hot, and noisy conditions. Possesses the ability to operate a forklift in all weather conditions and situations. Compensation details: 26-30 Hourly Wage PI7feadac6adaa-6892
11/21/2026
Full time
Description: The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am C Shift: Weds/Thurs - Sat 7am -7pm Requirements: SeaCa Plastic Packaging, LLC relocated to Surprise, AZ from Fowler, CA in 2019. SeaCa Plastic Packaging, LLC is one of the companies under the umbrella of Seattle-Tacoma Box Company headquartered in Kent, WA. Currently, Seattle-Tacoma Box Company conducts manufacturing and supports assembly operations and warehouses in Alaska, Oregon, and Washington. Seattle-Tacoma Box Company is the parent company of SeaCa Packaging, Inc. operating in Dinuba and Stockton, CA, SeaCa Plastic Packaging, LLC operating in Surprise, AZ, and our most recent addition to the family, Harvest House Packaging, LLC operating in Holtville, CA. The company collectively specialize in the manufacturing and distribution of corrugated, corrugated plastic and wooden packaging used throughout the food industry. Washington, Alaska, Oregon, California, and Arizona. SeaCa Plastic Packaging, LLC is an industry pioneer in the production of plastic corrugated products used throughout the food industry. This is an operator level position for work in a manufacturing environment. Training is provided to help you grow your career. You will be joining a crew of 3-9 people working as a team to accomplish the operating goals of the shift. Bonus pay can be earned as a member of the team that achieves their manufacturing goal. Work week is either 3/4 days or 7 days every 14 calendar days, you will have 50% of your days off. Typically, you earn 74 hours of regular pay plus 6 hours overtime every 2-week rotation. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am D Shift: Weds/Thurs - Sat 7pm - 7am The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Essential Functions Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Other Responsibilities Obeys and conforms to all company rules and regulations outlined in the employee handbook. Attends ongoing training and education classes as assigned. Ensures a clean and organized work area. Possesses the math skills to calculate numbers as required to satisfy order requirements. Possesses the ability to recognize nonconforming tags and procedures. Possesses the ability to work and communicate well with co-workers. Must agree to and wear approved safety PPE. Education, Experience and Required Skills Ability to be trained or have experience to operate hollow form extrusion equipment Ability to be trained or have experience in mechanical adjustment and repair in job related activities Possesses the ability to read, speak, and understand English well. Has the ability to be trained, as well as take, and follow directions. Possesses and or will obtain (through training) certification in forklift operation. Possess a valid State Driver's License (preferred). Possesses knowledge or will learn the Quality Management System. Possesses basic computer skills. Ability to work well under pressure and meet deadlines Has the ability to read, understand and follow schedules. Ability to pass a drug screen, where applicable for position. Experience operating a forklift and attachments (preferred). Experience with uneven/difficult forklift operation (preferred). Physical Requirements Must be able to sit, walk, squat, climb, reach, turn, bend, push, pull, and lift up to 50 pounds throughout a 10-12-hour shift. Possesses the ability to withstand dusty, hot, and noisy conditions. Possesses the ability to operate a forklift in all weather conditions and situations. Compensation details: 26-30 Hourly Wage PI7feadac6adaa-6892
SeaCa Plastic Packaging LLC
Extrusion Operator Technician - $26 - $30 Hourly Wage
SeaCa Plastic Packaging LLC Surprise, Arizona
Description: The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am C Shift: Weds/Thurs - Sat 7am -7pm Requirements: SeaCa Plastic Packaging, LLC relocated to Surprise, AZ from Fowler, CA in 2019. SeaCa Plastic Packaging, LLC is one of the companies under the umbrella of Seattle-Tacoma Box Company headquartered in Kent, WA. Currently, Seattle-Tacoma Box Company conducts manufacturing and supports assembly operations and warehouses in Alaska, Oregon, and Washington. Seattle-Tacoma Box Company is the parent company of SeaCa Packaging, Inc. operating in Dinuba and Stockton, CA, SeaCa Plastic Packaging, LLC operating in Surprise, AZ, and our most recent addition to the family, Harvest House Packaging, LLC operating in Holtville, CA. The company collectively specialize in the manufacturing and distribution of corrugated, corrugated plastic and wooden packaging used throughout the food industry. Washington, Alaska, Oregon, California, and Arizona. SeaCa Plastic Packaging, LLC is an industry pioneer in the production of plastic corrugated products used throughout the food industry. This is an operator level position for work in a manufacturing environment. Training is provided to help you grow your career. You will be joining a crew of 3-9 people working as a team to accomplish the operating goals of the shift. Bonus pay can be earned as a member of the team that achieves their manufacturing goal. Work week is either 3/4 days or 7 days every 14 calendar days, you will have 50% of your days off. Typically, you earn 74 hours of regular pay plus 6 hours overtime every 2-week rotation. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am D Shift: Weds/Thurs - Sat 7pm - 7am The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Essential Functions Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Other Responsibilities Obeys and conforms to all company rules and regulations outlined in the employee handbook. Attends ongoing training and education classes as assigned. Ensures a clean and organized work area. Possesses the math skills to calculate numbers as required to satisfy order requirements. Possesses the ability to recognize nonconforming tags and procedures. Possesses the ability to work and communicate well with co-workers. Must agree to and wear approved safety PPE. Education, Experience and Required Skills Ability to be trained or have experience to operate hollow form extrusion equipment Ability to be trained or have experience in mechanical adjustment and repair in job related activities Possesses the ability to read, speak, and understand English well. Has the ability to be trained, as well as take, and follow directions. Possesses and or will obtain (through training) certification in forklift operation. Possess a valid State Driver's License (preferred). Possesses knowledge or will learn the Quality Management System. Possesses basic computer skills. Ability to work well under pressure and meet deadlines Has the ability to read, understand and follow schedules. Ability to pass a drug screen, where applicable for position. Experience operating a forklift and attachments (preferred). Experience with uneven/difficult forklift operation (preferred). Physical Requirements Must be able to sit, walk, squat, climb, reach, turn, bend, push, pull, and lift up to 50 pounds throughout a 10-12-hour shift. Possesses the ability to withstand dusty, hot, and noisy conditions. Possesses the ability to operate a forklift in all weather conditions and situations. Compensation details: 26-30 Hourly Wage PI7feadac6adaa-6892
11/21/2026
Full time
Description: The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am C Shift: Weds/Thurs - Sat 7am -7pm Requirements: SeaCa Plastic Packaging, LLC relocated to Surprise, AZ from Fowler, CA in 2019. SeaCa Plastic Packaging, LLC is one of the companies under the umbrella of Seattle-Tacoma Box Company headquartered in Kent, WA. Currently, Seattle-Tacoma Box Company conducts manufacturing and supports assembly operations and warehouses in Alaska, Oregon, and Washington. Seattle-Tacoma Box Company is the parent company of SeaCa Packaging, Inc. operating in Dinuba and Stockton, CA, SeaCa Plastic Packaging, LLC operating in Surprise, AZ, and our most recent addition to the family, Harvest House Packaging, LLC operating in Holtville, CA. The company collectively specialize in the manufacturing and distribution of corrugated, corrugated plastic and wooden packaging used throughout the food industry. Washington, Alaska, Oregon, California, and Arizona. SeaCa Plastic Packaging, LLC is an industry pioneer in the production of plastic corrugated products used throughout the food industry. This is an operator level position for work in a manufacturing environment. Training is provided to help you grow your career. You will be joining a crew of 3-9 people working as a team to accomplish the operating goals of the shift. Bonus pay can be earned as a member of the team that achieves their manufacturing goal. Work week is either 3/4 days or 7 days every 14 calendar days, you will have 50% of your days off. Typically, you earn 74 hours of regular pay plus 6 hours overtime every 2-week rotation. Schedule is: B Shift: Sun - Tues/Weds 7pm - 7am D Shift: Weds/Thurs - Sat 7pm - 7am The Surprise, AZ location of SeaCa Plastic Packaging, LLC is currently looking to add two Extrusion Operator Technicians to our team. The Extrusion Operator Technician will conduct preventative maintenance and basic mechanical repair of the components used in Extrusion. Position Summary Works in extrusion as an operator and in charge of extrusion preventative maintenance and basic mechanical repair of the components used in Extrusion. Essential Functions Responsible for the preventative maintenance of all equipment used in extrusion assigned to the shift. Expected to trouble shoot mechanical problems on the extrusion equipment and perform basic repair and seek help in major repairs that is identified as required. Equipment included, but not limited to: material handling system, pelletizer, all components of the extrusion line, silos, rail car unloading system, chilled water system, compressed air and components, stacker. Organize and lead tooling changes, PM cleaning, and maintenance of tooling. Maintains safe, clean, and organized work environment. Obeys and conforms to all safety rules and regulations, always being aware of surroundings (foot traffic, product, other forklift, ect.), Follow lock out-tag-out safety and all personal protective equipment required for the job including gloves, heat protection sleeves, safety harnesses, hard hats, and other items as required. Works with the company software and programs to initiate work orders and close orders as they are completed, fill out shift reports and communicate with maintenance and the shift lead on work orders. Uses forklift to move items as required. Counts finished goods inventory and helps in other ways to keep the flow of product going efficiently, when required. Helps to initiate, recommend improvements, and provide solutions to repetitive mechanical breakdowns to leadership and co-workers, and help the implementation of solutions. Maintains current forklift operators' certification card. Performs other job-related duties as required. Other Responsibilities Obeys and conforms to all company rules and regulations outlined in the employee handbook. Attends ongoing training and education classes as assigned. Ensures a clean and organized work area. Possesses the math skills to calculate numbers as required to satisfy order requirements. Possesses the ability to recognize nonconforming tags and procedures. Possesses the ability to work and communicate well with co-workers. Must agree to and wear approved safety PPE. Education, Experience and Required Skills Ability to be trained or have experience to operate hollow form extrusion equipment Ability to be trained or have experience in mechanical adjustment and repair in job related activities Possesses the ability to read, speak, and understand English well. Has the ability to be trained, as well as take, and follow directions. Possesses and or will obtain (through training) certification in forklift operation. Possess a valid State Driver's License (preferred). Possesses knowledge or will learn the Quality Management System. Possesses basic computer skills. Ability to work well under pressure and meet deadlines Has the ability to read, understand and follow schedules. Ability to pass a drug screen, where applicable for position. Experience operating a forklift and attachments (preferred). Experience with uneven/difficult forklift operation (preferred). Physical Requirements Must be able to sit, walk, squat, climb, reach, turn, bend, push, pull, and lift up to 50 pounds throughout a 10-12-hour shift. Possesses the ability to withstand dusty, hot, and noisy conditions. Possesses the ability to operate a forklift in all weather conditions and situations. Compensation details: 26-30 Hourly Wage PI7feadac6adaa-6892
Mauser Packaging Solutions
Mauser Packaging- Maintenance Mechanic- Competitive Pay
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/19/2026
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
Aptyx
Extrusion Technician
Aptyx Taunton, Massachusetts
The Extrusion Technician provides technical support to Aptyx's extrusion manufacturing operations within commercial and medical device environments. This role is responsible for setting up, operating, troubleshooting, cleaning, and maintaining extrusion equipment in accordance with established standards and ISO 13485 quality system requirements. The Extrusion Technician ensures product quality, accurate documentation, effective raw material management, and safe operations while serving as a technical mentor to team members. Develop and implement precision extrusion and interventional extrusion processes specifically for medical device tubing to ensure high precision product and compliance with tight medical tolerances and standards. Key responsibilities: Set up, operate, monitor, and adjust extrusion manufacturing equipment in accordance with established process parameters and work instructions. Troubleshoot equipment and process issues to minimize downtime and maintain product quality. Perform in-process quality inspections to ensure product compliance and identify defects. Use precision measurement tools including calipers, micrometers, pin gauges, vision systems, and laser micrometers. Responsible for all aspects of the polymer extrusion line, including but not limited to; set-up and tear down, equipment maintenance and workflow. Execute existing complex processes such as (including but not exclusive to) multi lumen, taper tubing or co-extrusions; Balloon tubing. Drive process optimization. Work with production personnel and R&D to ensure high precision extrusion requirements meeting customer specifications and tolerances Diagnose and resolve issues related to the extrusion process to minimize downtime and defects. Support, coach and align with all Health and safety company policies. Provide extrusions in a timely manner in order to ensure production and development schedules are met. Collaborate with external vendors to develop tooling and fixtures that result in producing high precision quality products. Manage raw extrusion materials in a way that ensures traceability and prevents contamination. Maintain comprehensive records and documentation of all extrusion processes, improvements, and compliance with regulatory requirements. Generate documentation on extrusion runs that is used to control traceability and ensure reproducibility. Support productivity improvement, reducing unnecessary scrap, down time/set-up time. Work as part of a team to ensure products and processes comply with the relevant requirements of the quality management system. Support scrap-reduction, cost savings and quality improvement teams, with focus on process and material optimization. Provide technical support and training to production staff to ensure adherence to best practices and quality standards. Work independently with minimal supervision while maintaining accountability for assigned tasks. Adhere to all applicable Aptyx policies, procedures, and regulatory requirements related to health, safety, and environmental compliance. Train and mentor extrusion operators and peers as assigned. Other assignments as requested. Employment and Educational Requirements: 2 years' experience of hands-on precision extrusion for medical grade products is an asset Able to work 1st, 2nd or 3rd shifts Experience and understanding of extrusion equipment design Work as part of a Cross-functional team and independently with excellent personal time management skills, creating a collaborative project environment is essential. Able to conform to shifting priorities, demands and timelines through analytical and Problem-solving capabilities. Flexible during times of change. Good verbal and written communication skills required. Good computer skills including understanding databases, spreadsheets and word processing. Ability to read and write English, numeracy abilities, manual dexterity. PI816b9c993a9d-6206
11/18/2026
Full time
The Extrusion Technician provides technical support to Aptyx's extrusion manufacturing operations within commercial and medical device environments. This role is responsible for setting up, operating, troubleshooting, cleaning, and maintaining extrusion equipment in accordance with established standards and ISO 13485 quality system requirements. The Extrusion Technician ensures product quality, accurate documentation, effective raw material management, and safe operations while serving as a technical mentor to team members. Develop and implement precision extrusion and interventional extrusion processes specifically for medical device tubing to ensure high precision product and compliance with tight medical tolerances and standards. Key responsibilities: Set up, operate, monitor, and adjust extrusion manufacturing equipment in accordance with established process parameters and work instructions. Troubleshoot equipment and process issues to minimize downtime and maintain product quality. Perform in-process quality inspections to ensure product compliance and identify defects. Use precision measurement tools including calipers, micrometers, pin gauges, vision systems, and laser micrometers. Responsible for all aspects of the polymer extrusion line, including but not limited to; set-up and tear down, equipment maintenance and workflow. Execute existing complex processes such as (including but not exclusive to) multi lumen, taper tubing or co-extrusions; Balloon tubing. Drive process optimization. Work with production personnel and R&D to ensure high precision extrusion requirements meeting customer specifications and tolerances Diagnose and resolve issues related to the extrusion process to minimize downtime and defects. Support, coach and align with all Health and safety company policies. Provide extrusions in a timely manner in order to ensure production and development schedules are met. Collaborate with external vendors to develop tooling and fixtures that result in producing high precision quality products. Manage raw extrusion materials in a way that ensures traceability and prevents contamination. Maintain comprehensive records and documentation of all extrusion processes, improvements, and compliance with regulatory requirements. Generate documentation on extrusion runs that is used to control traceability and ensure reproducibility. Support productivity improvement, reducing unnecessary scrap, down time/set-up time. Work as part of a team to ensure products and processes comply with the relevant requirements of the quality management system. Support scrap-reduction, cost savings and quality improvement teams, with focus on process and material optimization. Provide technical support and training to production staff to ensure adherence to best practices and quality standards. Work independently with minimal supervision while maintaining accountability for assigned tasks. Adhere to all applicable Aptyx policies, procedures, and regulatory requirements related to health, safety, and environmental compliance. Train and mentor extrusion operators and peers as assigned. Other assignments as requested. Employment and Educational Requirements: 2 years' experience of hands-on precision extrusion for medical grade products is an asset Able to work 1st, 2nd or 3rd shifts Experience and understanding of extrusion equipment design Work as part of a Cross-functional team and independently with excellent personal time management skills, creating a collaborative project environment is essential. Able to conform to shifting priorities, demands and timelines through analytical and Problem-solving capabilities. Flexible during times of change. Good verbal and written communication skills required. Good computer skills including understanding databases, spreadsheets and word processing. Ability to read and write English, numeracy abilities, manual dexterity. PI816b9c993a9d-6206
Mauser Packaging Solutions
Maintenance Mechanic- Great Benefits
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/18/2026
Full time
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
Mauser Packaging Solutions
Mauser Packaging- Maintenance Mechanic- Competitive Pay
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/18/2026
Full time
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
Mauser Packaging Solutions
Maintenance Mechanic - 2nd Shift
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/18/2026
Full time
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
Mauser Packaging Solutions
Maintenance Mechanic- Competitve Pay
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/18/2026
Full time
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details

Modal Window

  • Blog
  • Contact
  • About Us
  • Terms & Conditions
  • Privacy
  • Employer
  • Post a Job
  • Search Resumes
  • Sign in
  • Job Seeker
  • Find Jobs
  • Create Resume
  • Sign in
  • Facebook
  • Twitter
  • Instagram
  • Pinterest
  • Youtube
Parent and Partner sites: IT Job Board | Search Jobs Near Me | RightTalent.co.uk | Quantity Surveyor jobs | Building Surveyor jobs | Construction Recruitment | Talent Recruiter | London Jobs | Property jobs
© 2008-2026 My Jobs Near Me