Jobs Near Me
  • Home
  • Search Jobs
  • Register CV
  • Post a Job
  • Employer Pricing
  • Contact Us
  • Sign in
  • Sign up
  • Home
  • Search Jobs
  • Register CV
  • Post a Job
  • Employer Pricing
  • Contact Us
Sorry, that job is no longer available. Here are some results that may be similar to the job you were looking for.

15 jobs found

Email me jobs like this
Refine Search
Current Search
molding technician i
Advanced Molding Technologies, LLC
Process Technician II - $28 - $37 Hourly Wage
Advanced Molding Technologies, LLC Circle Pines, Minnesota
Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Schedule: 1st Shift (Monday-Friday 6:00am to 2:30pm) Compensation: The hourly pay range for this position is $28.00 to $37.00. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: Process Technician II performs setup, startup, and troubleshooting activities for injection molding operations. This role supports continuous production, ensuring processes remain within validated parameters, and collaborates with Quality, Engineering, and Maintenance to resolve technical and quality-related issues. The Process Technician II also assists in mentoring Level I technicians, contributes to process optimization, and ensures compliance with ISO 13485, ISO 9001, cGMP, and internal QMS standards. Essential Duties and Responsibilities: Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Perform in-process troubleshooting to resolve molding, machine, and auxiliary equipment issues promptly and effectively. Perform setups independently as required to support production schedules or coverage needs, including both routine and moderately complex setups, depending on production needs. Assist Process Technician I employees during setups as needed by providing hands-on guidance, troubleshooting support, and verification to ensure proper procedures are followed. Collaborate with Engineering and Quality to address process or product issues and implement corrective actions. Execute proper shutdowns including purging, material changes, and documentation handoff. Perform and document work-cell verifications to confirm readiness, cleanliness, and compliance with production standards. Maintain accurate GDP-compliant process logs, maintenance requests, and PQ (Process Qualification) feedback. Ensure all process changes and documentation updates comply with ISO 13485, ISO 9001, and cGMP standards. Support QMS initiatives such as nonconformance reporting, change control, and participation in corrective- and preventive-action (CAPA) activities. Initiate and track to closure Tooling Work Orders (TWOs) as needed to support mold maintenance, tooling repair, and process optimization. Provide feedback on tooling, process, and equipment improvements that enhance quality, safety, and efficiency. Assist in mentoring and training Process Technician I employees in setup, troubleshooting, and documentation practices. Support validation, engineering trials, and new-tooling qualifications when assigned. Participate in small-scale continuous-improvement projects within the production area. Other duties as assigned. Knowledge, Skills, and Abilities: Strong working knowledge of injection-molding equipment, auxiliary systems, and process-control instrumentation. Understanding of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficient in root-cause troubleshooting, process adjustments, and corrective-action implementation. Familiarity with scientific-molding principles and basic data-driven problem-solving. Ability to interpret process documentation, setup sheets, and work instructions. Effective communication and collaboration with Engineering, Quality, Maintenance, and Production teams. Demonstrated leadership and mentoring abilities. Strong organizational skills with attention to documentation accuracy and process discipline. Commitment to safety, product quality, and regulatory compliance. Education and Experience Requirements: High-school diploma or equivalent required; technical certificate or degree in plastics, engineering technology, or related field preferred. 3+ years of recent injection-molding setup and processing experience required; medical-device or other regulated manufacturing experience strongly preferred. Additional training or certifications through AIM/Beaumont, RJG or Paulson are preferred and may be offered through employment Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Ability to work in hot, noisy, or confined areas during machine setup or maintenance activities. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 28-37 Hourly Wage PIeb42d2774b3e-2738
11/22/2026
Full time
Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Schedule: 1st Shift (Monday-Friday 6:00am to 2:30pm) Compensation: The hourly pay range for this position is $28.00 to $37.00. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: Process Technician II performs setup, startup, and troubleshooting activities for injection molding operations. This role supports continuous production, ensuring processes remain within validated parameters, and collaborates with Quality, Engineering, and Maintenance to resolve technical and quality-related issues. The Process Technician II also assists in mentoring Level I technicians, contributes to process optimization, and ensures compliance with ISO 13485, ISO 9001, cGMP, and internal QMS standards. Essential Duties and Responsibilities: Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Perform in-process troubleshooting to resolve molding, machine, and auxiliary equipment issues promptly and effectively. Perform setups independently as required to support production schedules or coverage needs, including both routine and moderately complex setups, depending on production needs. Assist Process Technician I employees during setups as needed by providing hands-on guidance, troubleshooting support, and verification to ensure proper procedures are followed. Collaborate with Engineering and Quality to address process or product issues and implement corrective actions. Execute proper shutdowns including purging, material changes, and documentation handoff. Perform and document work-cell verifications to confirm readiness, cleanliness, and compliance with production standards. Maintain accurate GDP-compliant process logs, maintenance requests, and PQ (Process Qualification) feedback. Ensure all process changes and documentation updates comply with ISO 13485, ISO 9001, and cGMP standards. Support QMS initiatives such as nonconformance reporting, change control, and participation in corrective- and preventive-action (CAPA) activities. Initiate and track to closure Tooling Work Orders (TWOs) as needed to support mold maintenance, tooling repair, and process optimization. Provide feedback on tooling, process, and equipment improvements that enhance quality, safety, and efficiency. Assist in mentoring and training Process Technician I employees in setup, troubleshooting, and documentation practices. Support validation, engineering trials, and new-tooling qualifications when assigned. Participate in small-scale continuous-improvement projects within the production area. Other duties as assigned. Knowledge, Skills, and Abilities: Strong working knowledge of injection-molding equipment, auxiliary systems, and process-control instrumentation. Understanding of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficient in root-cause troubleshooting, process adjustments, and corrective-action implementation. Familiarity with scientific-molding principles and basic data-driven problem-solving. Ability to interpret process documentation, setup sheets, and work instructions. Effective communication and collaboration with Engineering, Quality, Maintenance, and Production teams. Demonstrated leadership and mentoring abilities. Strong organizational skills with attention to documentation accuracy and process discipline. Commitment to safety, product quality, and regulatory compliance. Education and Experience Requirements: High-school diploma or equivalent required; technical certificate or degree in plastics, engineering technology, or related field preferred. 3+ years of recent injection-molding setup and processing experience required; medical-device or other regulated manufacturing experience strongly preferred. Additional training or certifications through AIM/Beaumont, RJG or Paulson are preferred and may be offered through employment Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Ability to work in hot, noisy, or confined areas during machine setup or maintenance activities. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 28-37 Hourly Wage PIeb42d2774b3e-2738
Energetics Technician II
Voyager Technologies Penrose, Colorado
Job Description Job Description Energetics Technician II Voyager is an innovative defense, national security and space technology company committed to advancing and delivering transformative, mission-critical solutions. We tackle the most complex challenges to unlock new frontiers for human progress, fortify national security, and protect critical assets to lead in the race for technological and operational superiority from ground to space. Forge the Future: Join Voyager Technologies The future belongs to those who build it. At Voyager Technologies, were building technologies that protect lives, expand frontiers and prepare us for whats next. And were doing that with people who are wired to solve, build, adapt and lead. These roles are not for the faint of heart. Youll help lay the foundation for humanity's future. Join a culture where innovation thrives, curiosity is rewarded, and impact is real. Were a company of doers, thinkers and builders, united by purpose and grounded in reality. If you want to put your skills to work where the stakes are real and the mission is bigger than any one person,forge the future with Voyager. The Energetics Technician II for Voyager Technologies is responsible for supporting energetic production efforts. The Energetics Technician II is a skilled, hands-on role responsible for setting up, operating, troubleshooting, and maintaining production equipment while ensuring product quality and adherence to safety procedures. This role provides technical support to energetics technician I, operators, and works closely with maintenance, engineering, and quality teams. The position reports to the Energetics Manufacturing Supervisor and is part of the Manufacturing and Operations team based in Penrose, CO/Pueblo, CO. This role is onsite based in Penrose, CO and Pueblo, CO. In this role, the essential functions are: This job requires working with explosives. Teamwork is especially important in all aspects of the job as we strive for safety. Set up, operate, and troubleshoot specialized mixing, molding, extrusion, or curing equipment for propellant and explosive formulations. Lead assembly of rocket propulsion subsystems, integrating mechanical, electrical, and energetic components. Train personnel in operating procedures, safety protocols, and technical tasks. Read and interpret engineering drawings, specifications, and material requirements to ensure accurate builds. Conduct in-process inspections and assist with root cause analysis for nonconformances in accordance with ISO 9001 and internal quality procedures. Train and guide Technician I and Energetics Operator employees in procedural compliance and best practices. Support engineering project preparation and execution, including safe loading, wiring, and monitoring of energetic test articles. Troubleshoot minor process issues and perform adjustments according to established tolerances. Interface with engineering and facilities Maintain production documentation, batch records, and quality assurance paperwork per company and regulatory standards. Basic Qualifications: Understanding of explosive safety and energetic material handling. Skill in measuring equipment, precision assembly, and process control. Proficiency in reading blueprints, schematics, and technical instructions. Strong documentation discipline to support traceability and audit readiness. Ability to operate under minimum supervision with sound judgment in safety-sensitive environments. Effective communication and teamwork across engineering, quality, and operations functions. Commitment to safety, quality, and continuous improvement; Problem-solving and root-cause analysis abilities; comfortable making decisions under time pressure. High school diploma or equivalent required; associate degree or technical training preferred. 35 years of manufacturing experience, ideally within energetics, aerospace, or defense sectors. Demonstrated proficiency with energetic materials processing or rocket motor assembly. Eligible to obtain and maintain State and Federal explosives licenses, including: Be 21 years of age or older. Pass pre-employment drug test. Pass State and Federal background checks. If your experience aligns with our basic qualifications and you are inspired by our mission, wed like to connect. If you dont see the right role right now, Join Our Talent Community and stay connected as we continue to build whats next. Preferred Qualifications: Forklift, hoist, or pressure-vessel operation experience (as applicable). Experience with automated manufacturing systems Familiarity with lean manufacturing principles, 5S, and six sigma methodologies. Ability to be a self-starter and solve complex problems from first principles with minimal supervision, both independently and as a member of a team. Conduct regular performance evaluations and recommend advancement, corrective action, or additional training as needed Supervisory Responsibility Direct daily activities of Operators and Technicians in assigned work areas. Provide input to performance evaluations as requested by Site Manager. Physical and/or Government Mandated Requirements: Ability to lift, move or carry items or equipment up to 50 pounds Ability to stand, walk, climb, balance, stoop, kneel, crouch, and crawl for extended periods in an outdoor industrial environment Ability to work in a high-hazard explosive manufacturing environment with exposure to heat, cold, noise, dust, and explosives Ability to wear required PPE, including flame-resistant clothing and other safety equipment, and comply with site-specific requirements such as end-of-day showering Ability to obtain and maintain State and Federal explosives licenses Candidates must meet all eligibility requirements to obtain and maintain applicable state and federal explosives licenses, including minimum age requirements (21 and over), a drug-free workplace in compliance with the Drug-Free Workplace Act of 1988 (41 U.S.C. ), Executive Order 12564 (Drug-Free Federal Workplace), applicable Department of Defense directives including DoD Instruction 1010.09 and DFARS and successful completion of any legally required background investigations. To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130) and the Export Administration Regulations (EAR) (15 CFR Parts 730-774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Applicants must be eligible to obtain any required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. The good faith hourly range for this role is $31.50 $31.50 at the time of this posting. Where you fall within the range depends on your experience, skills, and location. This range reflects base salary only and does not include benefits or bonus/incentive. This range may be adjusted in the future. Voyager offers a highly competitive total compensation package designed to support the well-being, growth, and success of our employees. Employees benefit from a flexible and comprehensive rewards program that supports both professional and personal well-being. Unlimited Flexible Time Off (FTO), empowering employees to take the time they need to recharge and maintain a healthy work-life balance Comprehensive medical, dental, and vision coverage for employees and their families, with a significant portion of premiums covered by the company and many benefits paid at 100% for employees Flexible, affordable gym memberships with 12,700+ options nationwide including 24 Hour Fitness, EoS Fitness, Crunch Fitness, Anytime Fitness, Blink Fitness, Chuze Fitness and more! No long term contracts and FREE on-demand workout videos before you enroll 401(k) retirement plan with a company match of up to 4% to help you build long-term financial security Company wellness programs that support physical and mental well-being Additional voluntary benefits and employee support resources The opportunity to work alongside a highly talented team in an innovative, mission driven environment Voyager is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Minority/Female/Disabled/Veteran The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice. Colorado pay range $31.50$31.50 USD Compensation details: 31.5-31.5 Hourly Wage PI90d90279ebfe-0289
11/21/2026
Full time
Job Description Job Description Energetics Technician II Voyager is an innovative defense, national security and space technology company committed to advancing and delivering transformative, mission-critical solutions. We tackle the most complex challenges to unlock new frontiers for human progress, fortify national security, and protect critical assets to lead in the race for technological and operational superiority from ground to space. Forge the Future: Join Voyager Technologies The future belongs to those who build it. At Voyager Technologies, were building technologies that protect lives, expand frontiers and prepare us for whats next. And were doing that with people who are wired to solve, build, adapt and lead. These roles are not for the faint of heart. Youll help lay the foundation for humanity's future. Join a culture where innovation thrives, curiosity is rewarded, and impact is real. Were a company of doers, thinkers and builders, united by purpose and grounded in reality. If you want to put your skills to work where the stakes are real and the mission is bigger than any one person,forge the future with Voyager. The Energetics Technician II for Voyager Technologies is responsible for supporting energetic production efforts. The Energetics Technician II is a skilled, hands-on role responsible for setting up, operating, troubleshooting, and maintaining production equipment while ensuring product quality and adherence to safety procedures. This role provides technical support to energetics technician I, operators, and works closely with maintenance, engineering, and quality teams. The position reports to the Energetics Manufacturing Supervisor and is part of the Manufacturing and Operations team based in Penrose, CO/Pueblo, CO. This role is onsite based in Penrose, CO and Pueblo, CO. In this role, the essential functions are: This job requires working with explosives. Teamwork is especially important in all aspects of the job as we strive for safety. Set up, operate, and troubleshoot specialized mixing, molding, extrusion, or curing equipment for propellant and explosive formulations. Lead assembly of rocket propulsion subsystems, integrating mechanical, electrical, and energetic components. Train personnel in operating procedures, safety protocols, and technical tasks. Read and interpret engineering drawings, specifications, and material requirements to ensure accurate builds. Conduct in-process inspections and assist with root cause analysis for nonconformances in accordance with ISO 9001 and internal quality procedures. Train and guide Technician I and Energetics Operator employees in procedural compliance and best practices. Support engineering project preparation and execution, including safe loading, wiring, and monitoring of energetic test articles. Troubleshoot minor process issues and perform adjustments according to established tolerances. Interface with engineering and facilities Maintain production documentation, batch records, and quality assurance paperwork per company and regulatory standards. Basic Qualifications: Understanding of explosive safety and energetic material handling. Skill in measuring equipment, precision assembly, and process control. Proficiency in reading blueprints, schematics, and technical instructions. Strong documentation discipline to support traceability and audit readiness. Ability to operate under minimum supervision with sound judgment in safety-sensitive environments. Effective communication and teamwork across engineering, quality, and operations functions. Commitment to safety, quality, and continuous improvement; Problem-solving and root-cause analysis abilities; comfortable making decisions under time pressure. High school diploma or equivalent required; associate degree or technical training preferred. 35 years of manufacturing experience, ideally within energetics, aerospace, or defense sectors. Demonstrated proficiency with energetic materials processing or rocket motor assembly. Eligible to obtain and maintain State and Federal explosives licenses, including: Be 21 years of age or older. Pass pre-employment drug test. Pass State and Federal background checks. If your experience aligns with our basic qualifications and you are inspired by our mission, wed like to connect. If you dont see the right role right now, Join Our Talent Community and stay connected as we continue to build whats next. Preferred Qualifications: Forklift, hoist, or pressure-vessel operation experience (as applicable). Experience with automated manufacturing systems Familiarity with lean manufacturing principles, 5S, and six sigma methodologies. Ability to be a self-starter and solve complex problems from first principles with minimal supervision, both independently and as a member of a team. Conduct regular performance evaluations and recommend advancement, corrective action, or additional training as needed Supervisory Responsibility Direct daily activities of Operators and Technicians in assigned work areas. Provide input to performance evaluations as requested by Site Manager. Physical and/or Government Mandated Requirements: Ability to lift, move or carry items or equipment up to 50 pounds Ability to stand, walk, climb, balance, stoop, kneel, crouch, and crawl for extended periods in an outdoor industrial environment Ability to work in a high-hazard explosive manufacturing environment with exposure to heat, cold, noise, dust, and explosives Ability to wear required PPE, including flame-resistant clothing and other safety equipment, and comply with site-specific requirements such as end-of-day showering Ability to obtain and maintain State and Federal explosives licenses Candidates must meet all eligibility requirements to obtain and maintain applicable state and federal explosives licenses, including minimum age requirements (21 and over), a drug-free workplace in compliance with the Drug-Free Workplace Act of 1988 (41 U.S.C. ), Executive Order 12564 (Drug-Free Federal Workplace), applicable Department of Defense directives including DoD Instruction 1010.09 and DFARS and successful completion of any legally required background investigations. To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130) and the Export Administration Regulations (EAR) (15 CFR Parts 730-774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Applicants must be eligible to obtain any required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. The good faith hourly range for this role is $31.50 $31.50 at the time of this posting. Where you fall within the range depends on your experience, skills, and location. This range reflects base salary only and does not include benefits or bonus/incentive. This range may be adjusted in the future. Voyager offers a highly competitive total compensation package designed to support the well-being, growth, and success of our employees. Employees benefit from a flexible and comprehensive rewards program that supports both professional and personal well-being. Unlimited Flexible Time Off (FTO), empowering employees to take the time they need to recharge and maintain a healthy work-life balance Comprehensive medical, dental, and vision coverage for employees and their families, with a significant portion of premiums covered by the company and many benefits paid at 100% for employees Flexible, affordable gym memberships with 12,700+ options nationwide including 24 Hour Fitness, EoS Fitness, Crunch Fitness, Anytime Fitness, Blink Fitness, Chuze Fitness and more! No long term contracts and FREE on-demand workout videos before you enroll 401(k) retirement plan with a company match of up to 4% to help you build long-term financial security Company wellness programs that support physical and mental well-being Additional voluntary benefits and employee support resources The opportunity to work alongside a highly talented team in an innovative, mission driven environment Voyager is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Minority/Female/Disabled/Veteran The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice. Colorado pay range $31.50$31.50 USD Compensation details: 31.5-31.5 Hourly Wage PI90d90279ebfe-0289
Advanced Molding Technologies, LLC
Process Technician II
Advanced Molding Technologies, LLC Circle Pines, Minnesota
Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Schedule: 1st Shift (Monday-Friday 6:00am to 2:30pm) Compensation: The hourly pay range for this position is $28.00 to $37.00. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: Process Technician II performs setup, startup, and troubleshooting activities for injection molding operations. This role supports continuous production, ensuring processes remain within validated parameters, and collaborates with Quality, Engineering, and Maintenance to resolve technical and quality-related issues. The Process Technician II also assists in mentoring Level I technicians, contributes to process optimization, and ensures compliance with ISO 13485, ISO 9001, cGMP, and internal QMS standards. Essential Duties and Responsibilities: Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Perform in-process troubleshooting to resolve molding, machine, and auxiliary equipment issues promptly and effectively. Perform setups independently as required to support production schedules or coverage needs, including both routine and moderately complex setups, depending on production needs. Assist Process Technician I employees during setups as needed by providing hands-on guidance, troubleshooting support, and verification to ensure proper procedures are followed. Collaborate with Engineering and Quality to address process or product issues and implement corrective actions. Execute proper shutdowns including purging, material changes, and documentation handoff. Perform and document work-cell verifications to confirm readiness, cleanliness, and compliance with production standards. Maintain accurate GDP-compliant process logs, maintenance requests, and PQ (Process Qualification) feedback. Ensure all process changes and documentation updates comply with ISO 13485, ISO 9001, and cGMP standards. Support QMS initiatives such as nonconformance reporting, change control, and participation in corrective- and preventive-action (CAPA) activities. Initiate and track to closure Tooling Work Orders (TWOs) as needed to support mold maintenance, tooling repair, and process optimization. Provide feedback on tooling, process, and equipment improvements that enhance quality, safety, and efficiency. Assist in mentoring and training Process Technician I employees in setup, troubleshooting, and documentation practices. Support validation, engineering trials, and new-tooling qualifications when assigned. Participate in small-scale continuous-improvement projects within the production area. Other duties as assigned. Knowledge, Skills, and Abilities: Strong working knowledge of injection-molding equipment, auxiliary systems, and process-control instrumentation. Understanding of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficient in root-cause troubleshooting, process adjustments, and corrective-action implementation. Familiarity with scientific-molding principles and basic data-driven problem-solving. Ability to interpret process documentation, setup sheets, and work instructions. Effective communication and collaboration with Engineering, Quality, Maintenance, and Production teams. Demonstrated leadership and mentoring abilities. Strong organizational skills with attention to documentation accuracy and process discipline. Commitment to safety, product quality, and regulatory compliance. Education and Experience Requirements: High-school diploma or equivalent required; technical certificate or degree in plastics, engineering technology, or related field preferred. 3+ years of recent injection-molding setup and processing experience required; medical-device or other regulated manufacturing experience strongly preferred. Additional training or certifications through AIM/Beaumont, RJG or Paulson are preferred and may be offered through employment Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Ability to work in hot, noisy, or confined areas during machine setup or maintenance activities. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 28-37 Hourly Wage PIeb42d2774b3e-2738
11/21/2026
Full time
Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Schedule: 1st Shift (Monday-Friday 6:00am to 2:30pm) Compensation: The hourly pay range for this position is $28.00 to $37.00. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: Process Technician II performs setup, startup, and troubleshooting activities for injection molding operations. This role supports continuous production, ensuring processes remain within validated parameters, and collaborates with Quality, Engineering, and Maintenance to resolve technical and quality-related issues. The Process Technician II also assists in mentoring Level I technicians, contributes to process optimization, and ensures compliance with ISO 13485, ISO 9001, cGMP, and internal QMS standards. Essential Duties and Responsibilities: Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Perform in-process troubleshooting to resolve molding, machine, and auxiliary equipment issues promptly and effectively. Perform setups independently as required to support production schedules or coverage needs, including both routine and moderately complex setups, depending on production needs. Assist Process Technician I employees during setups as needed by providing hands-on guidance, troubleshooting support, and verification to ensure proper procedures are followed. Collaborate with Engineering and Quality to address process or product issues and implement corrective actions. Execute proper shutdowns including purging, material changes, and documentation handoff. Perform and document work-cell verifications to confirm readiness, cleanliness, and compliance with production standards. Maintain accurate GDP-compliant process logs, maintenance requests, and PQ (Process Qualification) feedback. Ensure all process changes and documentation updates comply with ISO 13485, ISO 9001, and cGMP standards. Support QMS initiatives such as nonconformance reporting, change control, and participation in corrective- and preventive-action (CAPA) activities. Initiate and track to closure Tooling Work Orders (TWOs) as needed to support mold maintenance, tooling repair, and process optimization. Provide feedback on tooling, process, and equipment improvements that enhance quality, safety, and efficiency. Assist in mentoring and training Process Technician I employees in setup, troubleshooting, and documentation practices. Support validation, engineering trials, and new-tooling qualifications when assigned. Participate in small-scale continuous-improvement projects within the production area. Other duties as assigned. Knowledge, Skills, and Abilities: Strong working knowledge of injection-molding equipment, auxiliary systems, and process-control instrumentation. Understanding of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficient in root-cause troubleshooting, process adjustments, and corrective-action implementation. Familiarity with scientific-molding principles and basic data-driven problem-solving. Ability to interpret process documentation, setup sheets, and work instructions. Effective communication and collaboration with Engineering, Quality, Maintenance, and Production teams. Demonstrated leadership and mentoring abilities. Strong organizational skills with attention to documentation accuracy and process discipline. Commitment to safety, product quality, and regulatory compliance. Education and Experience Requirements: High-school diploma or equivalent required; technical certificate or degree in plastics, engineering technology, or related field preferred. 3+ years of recent injection-molding setup and processing experience required; medical-device or other regulated manufacturing experience strongly preferred. Additional training or certifications through AIM/Beaumont, RJG or Paulson are preferred and may be offered through employment Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Ability to work in hot, noisy, or confined areas during machine setup or maintenance activities. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 28-37 Hourly Wage PIeb42d2774b3e-2738
World Centric
Process Engineer
World Centric Stone Mountain, Georgia
Description: World Centric is a highly mission driven company that seeks to have a meaningful impact on people and the planet through our compostable products and the donation of 25% of profits to the most vulnerable in the world. World Centric is a leader in providing innovative compostable packaging solutions for the food service industry. We are seeking a hands-on Process Engineer to join our engineering and commercialization team. The Process Engineer owns process development mainly including extruders, injection molders, thermoformers, and heated presses. This is the person who takes a formulation that works at the bench and turns it into a repeatable, documented process with defined windows, cycle times, and specifications, working directly on the equipment alongside our R&D scientists. It is a methodical role: run structured trials, change one variable at a time, record everything, and figure out what the process can and cannot do. This role will be located on-site at our facility in Stone Mountain, GA (greater Atlanta metro area). This position will report to the director of engineering and commercialization and will work within a cross functional team of R&D scientists, engineers, and technicians. The ideal candidate is patient and data-driven, works very well independently, and is comfortable owning a process from first trial through a production-ready specification. Essential Responsibilities: Sets up, operates, and optimizes pilot process equipment including twin screw and single screw extruders, injection molders, heated presses and forming tools, mixers, dryers, and downstream equipment. Develops, optimizes, and documents processes for: extrusion (temperature profiles, screw configuration, feed rates, moisture, venting), injection molding (mold trials, cycle time, drop-in parameters), and pressing and forming (dough consistency, mold temperature, pressure, dwell, venting). Leads process trials of new formulations with R&D scientists, advising on processability before the trial and setting the run plan, machine setup, and sample plan. Runs structured trials and designed experiments to quantify how formulation and process parameters affect processability, part quality, cycle time, and yield, and turns the results into process windows, control limits, and specifications. Troubleshoots process problems in real time (feeding, melt stability, torque, die and cavity pressure, sticking, warping, moisture) and implements corrective actions. Scales processes from lab and pilot equipment to production systems, defining operating procedures and the process data needed by customers and contract manufacturers. Defines process requirements for screws, dies, molds, tooling, and auxiliaries and works with the R&D engineer on equipment selection, installation, and commissioning. Performs routine care, preventive maintenance checks, and minor repairs on process equipment during operation; coordinates larger repairs with other engineers Trains and certifies scientists and technicians on lab-tier equipment and writes the run sheets technicians work from. Maintains trial records, run sheets, trial reports, and process data sheets so results are comparable across programs and over time. Ensures safe operation of all equipment and adherence to safety procedures and housekeeping standards. Requirements: Qualifications Required: BS in Chemical, Mechanical, Materials, Polymer, or Plastics Engineering, or equivalent hands-on experience 5+ years hands-on process engineering experience in polymer or materials processing Demonstrated proficiency operating twin screw and single screw extruders, including screw changes and recovering from torque trips and lockups Hands-on experience injection molding, compression molding thermoforming, film extrusion, foam extrusion or other manufacturing processes Experience running structured trials or designed experiments and turning the data into process windows and specifications Strong documentation and data analysis skills Comfortable in a hands-on manufacturing environment including working directly on equipment and around hot processing equipment Preferred: Experience processing natural materials such as starches, cellulosics, and biopolymers Experience in food or pet food extrusion Experience with process scale-up and technology transfer to production or contract manufacturers Previous experience working in a startup environment Physical Requirements: Ability to stand and walk up to 8 hours Ability to lift up to 50 lbs Ability to handle manufacturing environment with loud noises (PPE required) Logistics: Position is located in Stone Mountain full time with working hours from 9-5:30 Compensation details: 00 Yearly Salary PI488a2c991ec2-1014
11/20/2026
Full time
Description: World Centric is a highly mission driven company that seeks to have a meaningful impact on people and the planet through our compostable products and the donation of 25% of profits to the most vulnerable in the world. World Centric is a leader in providing innovative compostable packaging solutions for the food service industry. We are seeking a hands-on Process Engineer to join our engineering and commercialization team. The Process Engineer owns process development mainly including extruders, injection molders, thermoformers, and heated presses. This is the person who takes a formulation that works at the bench and turns it into a repeatable, documented process with defined windows, cycle times, and specifications, working directly on the equipment alongside our R&D scientists. It is a methodical role: run structured trials, change one variable at a time, record everything, and figure out what the process can and cannot do. This role will be located on-site at our facility in Stone Mountain, GA (greater Atlanta metro area). This position will report to the director of engineering and commercialization and will work within a cross functional team of R&D scientists, engineers, and technicians. The ideal candidate is patient and data-driven, works very well independently, and is comfortable owning a process from first trial through a production-ready specification. Essential Responsibilities: Sets up, operates, and optimizes pilot process equipment including twin screw and single screw extruders, injection molders, heated presses and forming tools, mixers, dryers, and downstream equipment. Develops, optimizes, and documents processes for: extrusion (temperature profiles, screw configuration, feed rates, moisture, venting), injection molding (mold trials, cycle time, drop-in parameters), and pressing and forming (dough consistency, mold temperature, pressure, dwell, venting). Leads process trials of new formulations with R&D scientists, advising on processability before the trial and setting the run plan, machine setup, and sample plan. Runs structured trials and designed experiments to quantify how formulation and process parameters affect processability, part quality, cycle time, and yield, and turns the results into process windows, control limits, and specifications. Troubleshoots process problems in real time (feeding, melt stability, torque, die and cavity pressure, sticking, warping, moisture) and implements corrective actions. Scales processes from lab and pilot equipment to production systems, defining operating procedures and the process data needed by customers and contract manufacturers. Defines process requirements for screws, dies, molds, tooling, and auxiliaries and works with the R&D engineer on equipment selection, installation, and commissioning. Performs routine care, preventive maintenance checks, and minor repairs on process equipment during operation; coordinates larger repairs with other engineers Trains and certifies scientists and technicians on lab-tier equipment and writes the run sheets technicians work from. Maintains trial records, run sheets, trial reports, and process data sheets so results are comparable across programs and over time. Ensures safe operation of all equipment and adherence to safety procedures and housekeeping standards. Requirements: Qualifications Required: BS in Chemical, Mechanical, Materials, Polymer, or Plastics Engineering, or equivalent hands-on experience 5+ years hands-on process engineering experience in polymer or materials processing Demonstrated proficiency operating twin screw and single screw extruders, including screw changes and recovering from torque trips and lockups Hands-on experience injection molding, compression molding thermoforming, film extrusion, foam extrusion or other manufacturing processes Experience running structured trials or designed experiments and turning the data into process windows and specifications Strong documentation and data analysis skills Comfortable in a hands-on manufacturing environment including working directly on equipment and around hot processing equipment Preferred: Experience processing natural materials such as starches, cellulosics, and biopolymers Experience in food or pet food extrusion Experience with process scale-up and technology transfer to production or contract manufacturers Previous experience working in a startup environment Physical Requirements: Ability to stand and walk up to 8 hours Ability to lift up to 50 lbs Ability to handle manufacturing environment with loud noises (PPE required) Logistics: Position is located in Stone Mountain full time with working hours from 9-5:30 Compensation details: 00 Yearly Salary PI488a2c991ec2-1014
Graham Packaging Company
Process Technician (Day Shift) starting up to $33.65/hour
Graham Packaging Company Twin Falls, Idaho
Company Statement Graham Packaging is a people, planet and values-based company and a leader in sustainable packaging manufacturing. From the kitchen to the laundry room, Graham Packaging is part of your everyday life. For employees at Graham, our Blue Culture is part of their everyday lives, too. In other words, Blue is how we do things here. At Graham, we are united by a clear vision. We know our part and help those around us know theirs, encouraging one another to continuously improve. We create a safe, challenging environment to innovate by supporting creative ideas and new ways of thinking. We take the initiative to cultivate our individual growth and help others do the same, while keeping ourselves and one another accountable. And we actively promote cooperation, collaboration, integrity and respect across regions and teams to foster an engaged, diverse and connected workforce. We value our employees, and a Blue Culture allows for the most rewarding employee experience as part of the Graham family. Blue is how we feel about what we do-together-to create a better tomorrow. Working at Graham means you lead constructively with clear goals, use diverse thinking to drive excellence, accountability, innovation, as well as demonstrating collaboration, embracing learning, and taking action for continuous improvement and growth. Overview Graham Packaging Company is looking for a Process Technician based in Twin Falls, ID. This opening is for Day Shift, 6:30am-6:30pm on a 2/2/3 schedule (working every other weekend). Weekly pay starting up to $33.65 per hour based on experience. Benefits effective on day one: Medical, Dental, Vision, and 401(k) with match. Process Technicians are responsible for day-to-day process improvements, mechanical and process troubleshooting, and preventative maintenance duties. General responsibilities may include monitoring and processing of machines to ensure employee safety, high quality containers and maximize machine efficiency. May work closely with Process Engineers Production Manager and/or Production Shift Supervisor in the scheduling and completion of job changes, mold changes, processing trials and other assignments as required. The primary duties of a Process Technician include: Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. Understands, follows and enforces all established policies, procedures and recognized practices. Monitoring and processing of machines to ensure employee safety, high quality containers and maximize machine efficiency. Work closely with the Production Shift Supervisor to evaluate, train and develop the Operators in the operation of the blow molding machines. Make repairs and modifications that are beyond the abilities of the Operators. May perform all the duties and responsibilities of the Operator as assigned. Assist in mold changes, new molds, resin trials and equipment installation, etc., as required. Assist in problem solving events and maintain line efficiencies to meet standard Complete appropriate documentation to track downtime, process changes and adjustments. May also be required to accurately record other reports as trained and assigned. Drives the attaining of budgeted line speeds and efficiencies by interacting with the Production, Quality, and Maintenance departments. Initiate timely corrective actions when issues arise. Maintain a commitment to promote a respectful and productive team environment; assist and train others as needed, help with break coverage. Limited travel may be required. Qualifications Two year Associate Degree in Industrial Maintenance or related field is preferred. A minimum of five years Industrial Maintenance or Process Technician experience is preferred. Process Technicians are required to interact with managers, employees, vendors, and customers. Therefore, the following skills and proficiencies are also essential requirements of the position: Ability to maintain regular, predictable, and punctual attendance. Computer usage and typing skills are essential. Excellent verbal and written communication, including the ability to effectively communicate with internal and external customers. Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service. Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. Communicates effectively: conveys facts and information clearly both verbally and orally. Collaborates well with others: proactively contributes to group objectives; volunteers to help others. Compensation Statement The expected salary range for the position described in this posting is made in accordance with the legal mandates of certain jurisdictions within the United States. The final agreed-upon compensation is based on individual qualifications and experience. Benefits Statement Benefits include medical, dental, vision and basic life insurance. Employees are able to enroll in the company's 401K Employee Saving Plan and may participate in its Employee Wellness Program. Employees will also receive paid time off in accordance with company policy and state law requirements. EEO Disclaimer Graham Packaging is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age, national origin, physical or mental disability, gender identity and/or expression, marital status, veteran status or other characteristics protected by law.
11/20/2026
Full time
Company Statement Graham Packaging is a people, planet and values-based company and a leader in sustainable packaging manufacturing. From the kitchen to the laundry room, Graham Packaging is part of your everyday life. For employees at Graham, our Blue Culture is part of their everyday lives, too. In other words, Blue is how we do things here. At Graham, we are united by a clear vision. We know our part and help those around us know theirs, encouraging one another to continuously improve. We create a safe, challenging environment to innovate by supporting creative ideas and new ways of thinking. We take the initiative to cultivate our individual growth and help others do the same, while keeping ourselves and one another accountable. And we actively promote cooperation, collaboration, integrity and respect across regions and teams to foster an engaged, diverse and connected workforce. We value our employees, and a Blue Culture allows for the most rewarding employee experience as part of the Graham family. Blue is how we feel about what we do-together-to create a better tomorrow. Working at Graham means you lead constructively with clear goals, use diverse thinking to drive excellence, accountability, innovation, as well as demonstrating collaboration, embracing learning, and taking action for continuous improvement and growth. Overview Graham Packaging Company is looking for a Process Technician based in Twin Falls, ID. This opening is for Day Shift, 6:30am-6:30pm on a 2/2/3 schedule (working every other weekend). Weekly pay starting up to $33.65 per hour based on experience. Benefits effective on day one: Medical, Dental, Vision, and 401(k) with match. Process Technicians are responsible for day-to-day process improvements, mechanical and process troubleshooting, and preventative maintenance duties. General responsibilities may include monitoring and processing of machines to ensure employee safety, high quality containers and maximize machine efficiency. May work closely with Process Engineers Production Manager and/or Production Shift Supervisor in the scheduling and completion of job changes, mold changes, processing trials and other assignments as required. The primary duties of a Process Technician include: Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. Understands, follows and enforces all established policies, procedures and recognized practices. Monitoring and processing of machines to ensure employee safety, high quality containers and maximize machine efficiency. Work closely with the Production Shift Supervisor to evaluate, train and develop the Operators in the operation of the blow molding machines. Make repairs and modifications that are beyond the abilities of the Operators. May perform all the duties and responsibilities of the Operator as assigned. Assist in mold changes, new molds, resin trials and equipment installation, etc., as required. Assist in problem solving events and maintain line efficiencies to meet standard Complete appropriate documentation to track downtime, process changes and adjustments. May also be required to accurately record other reports as trained and assigned. Drives the attaining of budgeted line speeds and efficiencies by interacting with the Production, Quality, and Maintenance departments. Initiate timely corrective actions when issues arise. Maintain a commitment to promote a respectful and productive team environment; assist and train others as needed, help with break coverage. Limited travel may be required. Qualifications Two year Associate Degree in Industrial Maintenance or related field is preferred. A minimum of five years Industrial Maintenance or Process Technician experience is preferred. Process Technicians are required to interact with managers, employees, vendors, and customers. Therefore, the following skills and proficiencies are also essential requirements of the position: Ability to maintain regular, predictable, and punctual attendance. Computer usage and typing skills are essential. Excellent verbal and written communication, including the ability to effectively communicate with internal and external customers. Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service. Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. Communicates effectively: conveys facts and information clearly both verbally and orally. Collaborates well with others: proactively contributes to group objectives; volunteers to help others. Compensation Statement The expected salary range for the position described in this posting is made in accordance with the legal mandates of certain jurisdictions within the United States. The final agreed-upon compensation is based on individual qualifications and experience. Benefits Statement Benefits include medical, dental, vision and basic life insurance. Employees are able to enroll in the company's 401K Employee Saving Plan and may participate in its Employee Wellness Program. Employees will also receive paid time off in accordance with company policy and state law requirements. EEO Disclaimer Graham Packaging is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age, national origin, physical or mental disability, gender identity and/or expression, marital status, veteran status or other characteristics protected by law.
Mauser Packaging Solutions
Mauser Packaging- Maintenance Mechanic- Competitive Pay
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/19/2026
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
Orion Castings
Process Control Technician (6am-2pm)
Orion Castings Grafton, Wisconsin
Process Control Technician (6am-2pm) Summary The Process Control Technician is responsible for developing, monitoring, and optimizing high-pressure aluminum die casting processes to ensure safe operation, consistent quality, and maximum productivity. This position works closely with production, tooling, maintenance, quality, and engineering to establish process standards, troubleshoot manufacturing issues, and support continuous improvement initiatives. Principal Duties and Responsibilities (but not limited to ) Develop and maintain standardized die casting process parameters. Set up and optimize die casting machines for new and existing production. Monitor critical process variables including: Melt temperature Die temperature Shot profiles Injection speeds Intensification pressure Fill time Cycle time Lubrication parameters Analyze casting defects including: Porosity Cold shuts Blisters Flash Soldering Misruns Shrinkage Perform root cause analysis using process data. Establish and maintain documented process sheets and machine setup instructions. Work with quality personnel to improve first-pass yield and reduce scrap. Assist in die tryouts and new product launches. Recommend tooling, process, or equipment improvements. Validate process changes through production trials. Ensure compliance with customer specifications and quality standards. Train operators and setup technicians on approved process standards. Participate in continuous improvement and lean manufacturing initiatives. Please note that the duties and requirements described herein are intended to represent general contents of this job. This is not to be construed as an exhaustive statement of duties and responsibilities. Qualifications 2+ years of experience in a manufacturing or industrial environment, preferably in high-pressure aluminum die casting, casting operations, machining, maintenance, automation, or similar production processes. Strong understanding of: Aluminum alloys Vacuum die casting (preferred) Thermal management Die lubrication systems Hydraulic systems Robot automation Working knowledge of computer applications used for communication, documentation, and reporting Understanding of molding principles applied to die casting is a plus. Experience with real-time process monitoring systems. Familiarity with X-ray analysis of castings. Knowledge of IATF 16949 quality requirements. Skills: Strong analytical and troubleshooting skills. Ability to interpret production and quality data. Excellent communication and teamwork. Strong organizational skills and attention to detail. Ability to manage multiple priorities in a fast-paced manufacturing environment. Key Position Competencies: Communications - Listening, Reading Comprehension, Speaking and Writing. Cognition - Analysis/Reasoning, Creative & Innovative Thinking, Decision Making & Judgement, and Problem Solving. Personal Effectiveness - Accountability & Dependability, Adaptability & Flexibility, Customer Focus, Development & Continual Learning, Ethics & Integrity, Results Focus & Initiative, Safety Focus, Self-Management, Stress Tolerance, and Tact. Interaction with Others - Influencing Others, Relationship Building, Teamwork and Valuing Diversity Occupational - Advocating Causes, Enforcing Laws, Rules & Regulations, Facilitating Groups, Interviewing Others, Providing Consultation, and Presenting Information. Management Qualities - Business Alignment, Coaching and Mentoring, Leadership, Fiscal Accountability, Organizational & Political Savvy, Planning & Organizing, Staff Management and Strategic Vision. For more information about Orion Casting Careers and future job postings, please JOIN our Talent Community at Orion Casting has a strong commitment to the principle of diversity, and in that spirit seeks a broad spectrum of candidates including women, minorities, veterans, and people with disabilities. Individuals with disabilities desiring accommodations in the application process should notify the hiring department by the application deadline. PI647ba38ded68-3903
11/19/2026
Full time
Process Control Technician (6am-2pm) Summary The Process Control Technician is responsible for developing, monitoring, and optimizing high-pressure aluminum die casting processes to ensure safe operation, consistent quality, and maximum productivity. This position works closely with production, tooling, maintenance, quality, and engineering to establish process standards, troubleshoot manufacturing issues, and support continuous improvement initiatives. Principal Duties and Responsibilities (but not limited to ) Develop and maintain standardized die casting process parameters. Set up and optimize die casting machines for new and existing production. Monitor critical process variables including: Melt temperature Die temperature Shot profiles Injection speeds Intensification pressure Fill time Cycle time Lubrication parameters Analyze casting defects including: Porosity Cold shuts Blisters Flash Soldering Misruns Shrinkage Perform root cause analysis using process data. Establish and maintain documented process sheets and machine setup instructions. Work with quality personnel to improve first-pass yield and reduce scrap. Assist in die tryouts and new product launches. Recommend tooling, process, or equipment improvements. Validate process changes through production trials. Ensure compliance with customer specifications and quality standards. Train operators and setup technicians on approved process standards. Participate in continuous improvement and lean manufacturing initiatives. Please note that the duties and requirements described herein are intended to represent general contents of this job. This is not to be construed as an exhaustive statement of duties and responsibilities. Qualifications 2+ years of experience in a manufacturing or industrial environment, preferably in high-pressure aluminum die casting, casting operations, machining, maintenance, automation, or similar production processes. Strong understanding of: Aluminum alloys Vacuum die casting (preferred) Thermal management Die lubrication systems Hydraulic systems Robot automation Working knowledge of computer applications used for communication, documentation, and reporting Understanding of molding principles applied to die casting is a plus. Experience with real-time process monitoring systems. Familiarity with X-ray analysis of castings. Knowledge of IATF 16949 quality requirements. Skills: Strong analytical and troubleshooting skills. Ability to interpret production and quality data. Excellent communication and teamwork. Strong organizational skills and attention to detail. Ability to manage multiple priorities in a fast-paced manufacturing environment. Key Position Competencies: Communications - Listening, Reading Comprehension, Speaking and Writing. Cognition - Analysis/Reasoning, Creative & Innovative Thinking, Decision Making & Judgement, and Problem Solving. Personal Effectiveness - Accountability & Dependability, Adaptability & Flexibility, Customer Focus, Development & Continual Learning, Ethics & Integrity, Results Focus & Initiative, Safety Focus, Self-Management, Stress Tolerance, and Tact. Interaction with Others - Influencing Others, Relationship Building, Teamwork and Valuing Diversity Occupational - Advocating Causes, Enforcing Laws, Rules & Regulations, Facilitating Groups, Interviewing Others, Providing Consultation, and Presenting Information. Management Qualities - Business Alignment, Coaching and Mentoring, Leadership, Fiscal Accountability, Organizational & Political Savvy, Planning & Organizing, Staff Management and Strategic Vision. For more information about Orion Casting Careers and future job postings, please JOIN our Talent Community at Orion Casting has a strong commitment to the principle of diversity, and in that spirit seeks a broad spectrum of candidates including women, minorities, veterans, and people with disabilities. Individuals with disabilities desiring accommodations in the application process should notify the hiring department by the application deadline. PI647ba38ded68-3903
Plastics Manufacturing Positions
CKS Packaging Houston, Texas
Job Description Job Description CKS Packaging is currently looking for hardworking, dependable individuals to join our production and maintenance teams across our CKS Packaging locations. We are hiring for multiple positions across our facilities. (Please note if you are viewing this posting on an external job board, unless specifically stated in the posting, the provided hourly/salary estimates may not be accurate as they are not provided by CKS.) What's In it for You? Stable, growing organization with opportunity for future advancement of qualified candidates Competitive pay based on experience and qualifications Excellent medical, dental, and vision benefits at modest employee contributions Discretionary Bonus 401k participation with Company matching contributions upon completion of first 30 days of service Current Openings Graham, NC Electrical Technician/Engineer Bekum Super Tech/Master Technician Current Openings Kansas City, MO PET Injection Molding Super/Master Tech (1 step mchinery: Aoki and Neissei) Machine Operators Maintenance Technicians Production Supervisors Current Openings Naugatuck, CT Maintenance Technicians Maintenance Manager (plastics experience required) Process Manager (Bekum changeover and processing experience highly preferred) Current Openings Brownsville, TN Quality Supervisor Maintenance Technicians Production Supervisor Current Openings Urbana, IL Maintenance Technicians Machine Operators Production Supervisor Current Openings Fort Worth/Dallas, TX PET Blow Molding Process Technician- Dallas, TX Maintenance Technicians- Dallas, TX Maintenance Technicians- Fort Worth, TX Electrician (PLC knowledge)- Fort Worth, TX Machine Operators- Fort Worth, TX Production Supervisor- Fort Worth, TX Current Openings Houston, TX Maintenance Technicians Machine Operators Current Openings Atlanta, GA Maintenance Technicians Machine Operators Setup/Process Technicians (PET Blow Molding) Production Supervisors Shifts: 1st: Monday - Friday (some Saturday's) 7:00am-3:00pm 2nd: Monday - Friday (some Saturday's) 3:00pm-11:00pm 3rd: Monday - Friday (some Saturday's) 11:00pm-7:00am
11/18/2026
Full time
Job Description Job Description CKS Packaging is currently looking for hardworking, dependable individuals to join our production and maintenance teams across our CKS Packaging locations. We are hiring for multiple positions across our facilities. (Please note if you are viewing this posting on an external job board, unless specifically stated in the posting, the provided hourly/salary estimates may not be accurate as they are not provided by CKS.) What's In it for You? Stable, growing organization with opportunity for future advancement of qualified candidates Competitive pay based on experience and qualifications Excellent medical, dental, and vision benefits at modest employee contributions Discretionary Bonus 401k participation with Company matching contributions upon completion of first 30 days of service Current Openings Graham, NC Electrical Technician/Engineer Bekum Super Tech/Master Technician Current Openings Kansas City, MO PET Injection Molding Super/Master Tech (1 step mchinery: Aoki and Neissei) Machine Operators Maintenance Technicians Production Supervisors Current Openings Naugatuck, CT Maintenance Technicians Maintenance Manager (plastics experience required) Process Manager (Bekum changeover and processing experience highly preferred) Current Openings Brownsville, TN Quality Supervisor Maintenance Technicians Production Supervisor Current Openings Urbana, IL Maintenance Technicians Machine Operators Production Supervisor Current Openings Fort Worth/Dallas, TX PET Blow Molding Process Technician- Dallas, TX Maintenance Technicians- Dallas, TX Maintenance Technicians- Fort Worth, TX Electrician (PLC knowledge)- Fort Worth, TX Machine Operators- Fort Worth, TX Production Supervisor- Fort Worth, TX Current Openings Houston, TX Maintenance Technicians Machine Operators Current Openings Atlanta, GA Maintenance Technicians Machine Operators Setup/Process Technicians (PET Blow Molding) Production Supervisors Shifts: 1st: Monday - Friday (some Saturday's) 7:00am-3:00pm 2nd: Monday - Friday (some Saturday's) 3:00pm-11:00pm 3rd: Monday - Friday (some Saturday's) 11:00pm-7:00am
PET Blow Mold Technician
CKS Packaging Dallas, Texas
Job Description Job Description Process Tech Needed- Dallas, TX What's In it for You? Stable, growing organization with opportunity for future advancement of qualified candidates if successful Competitive pay based on experience and qualifications Excellent medical, dental, and vision benefits at modest employee contributions Discretionary Bonus 401k participation with Company matching contributions upon completion of first 30 days of employment Requirements/Qualifications: Set up and start up blow molding machines (extrusion blow molding or stretch blow molding depending on equipment) Perform mold and tooling changeovers on blow molding machines according to production schedules Monitor machine performance, make process adjustments, and perform routine maintenance Troubleshoot and resolve mechanical, process, and electrical issues on blow molding machines, conveyors, and related auxiliary equipment. Adjust PLC/HMI parameters and identify basic faults in control systems (with assistance from maintenance when needed). Perform routine and preventive maintenance on electrical components (sensors, heaters, switches, basic wiring). Operate machines and production equipment safely and in accordance with instructions. Troubleshoot machine, mold, and process-related issues to minimize downtime and scrap. Adjust and fine-tune process parameters including preform heating, blowing pressure, and mold cooling for optimal performance Assist with material management including the processing of scrap and regrind produced Perform mold changes and assist with tooling installations and adjustments for new product runs. Perform minor maintenance functions as needed on machines and auxiliary equipment Knowledge & Skills Requirements: Electrical systems knowledge/experience required. Strong understanding of PET processing characteristics (e.g., IV degradation, preform handling, oven temperature zones). Knowledge of extrusion blow molding, stretch blow molding, and one-step molding processes and equipment Knowledge of Sidel, 1blow, Aoki, or similar machinery and PET resin is preferred. Experience making adjustments to production equipment processes to change material distribution, weights, heights, and other physical properties/dimensions, parison, etc. Knowledge of mold change procedures (changeover team, setup tech, process tech, super tech) and steps/methods for line changes Strong mechanical aptitude and understanding of pneumatics, hydraulics, and PLCs
11/18/2026
Full time
Job Description Job Description Process Tech Needed- Dallas, TX What's In it for You? Stable, growing organization with opportunity for future advancement of qualified candidates if successful Competitive pay based on experience and qualifications Excellent medical, dental, and vision benefits at modest employee contributions Discretionary Bonus 401k participation with Company matching contributions upon completion of first 30 days of employment Requirements/Qualifications: Set up and start up blow molding machines (extrusion blow molding or stretch blow molding depending on equipment) Perform mold and tooling changeovers on blow molding machines according to production schedules Monitor machine performance, make process adjustments, and perform routine maintenance Troubleshoot and resolve mechanical, process, and electrical issues on blow molding machines, conveyors, and related auxiliary equipment. Adjust PLC/HMI parameters and identify basic faults in control systems (with assistance from maintenance when needed). Perform routine and preventive maintenance on electrical components (sensors, heaters, switches, basic wiring). Operate machines and production equipment safely and in accordance with instructions. Troubleshoot machine, mold, and process-related issues to minimize downtime and scrap. Adjust and fine-tune process parameters including preform heating, blowing pressure, and mold cooling for optimal performance Assist with material management including the processing of scrap and regrind produced Perform mold changes and assist with tooling installations and adjustments for new product runs. Perform minor maintenance functions as needed on machines and auxiliary equipment Knowledge & Skills Requirements: Electrical systems knowledge/experience required. Strong understanding of PET processing characteristics (e.g., IV degradation, preform handling, oven temperature zones). Knowledge of extrusion blow molding, stretch blow molding, and one-step molding processes and equipment Knowledge of Sidel, 1blow, Aoki, or similar machinery and PET resin is preferred. Experience making adjustments to production equipment processes to change material distribution, weights, heights, and other physical properties/dimensions, parison, etc. Knowledge of mold change procedures (changeover team, setup tech, process tech, super tech) and steps/methods for line changes Strong mechanical aptitude and understanding of pneumatics, hydraulics, and PLCs
Mauser Packaging Solutions
Maintenance Mechanic- Great Benefits
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/18/2026
Full time
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
Mauser Packaging Solutions
Mauser Packaging- Maintenance Mechanic- Competitive Pay
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/18/2026
Full time
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
Mauser Packaging Solutions
Maintenance Mechanic - 2nd Shift
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/18/2026
Full time
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
Mauser Packaging Solutions
Maintenance Mechanic- Competitve Pay
Mauser Packaging Solutions Chillicothe, Missouri
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
11/18/2026
Full time
Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance schedules. Diagnose equipment malfunctions using technical manuals, electrical schematics, PLC software, and diagnostic testing instruments. Troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and vacuum conveying systems. Repair and maintain extrusion blow molding machines, grinders, conveyors, palletizers, leak testers, trimming equipment, and associated auxiliary equipment. Replace worn or defective components including motors, bearings, belts, chains, gearboxes, pumps, valves, sensors, switches, cylinders, and drives. Install, align, adjust, and calibrate new or existing production equipment. Perform emergency repairs to minimize production downtime. Electrical & Automation Troubleshoot electrical control systems, motor controls, VFDs, and PLC-controlled equipment. Read and interpret electrical schematics, wiring diagrams, blueprints, and equipment manuals. Diagnose and repair control circuits, relays, sensors, photo eyes, proximity switches, HMI interfaces, and emergency stop circuits. Assist with PLC troubleshooting and minor programming modifications (Allen-Bradley and/or Siemens preferred). Install and troubleshoot machine wiring and electrical components while following NFPA 70E electrical safety standards. Mechanical Systems Repair and maintain gearboxes, conveyors, pumps, compressors, blowers, fans, chain drives, sprockets, bearings, couplings, and mechanical assemblies. Perform precision alignment of motors and rotating equipment. Lubricate machinery and replace mechanical wear components before failure occurs. Perform minor machining, fabrication, cutting, drilling, and welding as necessary. Hydraulic & Pneumatic Systems Troubleshoot hydraulic cylinders, pumps, valves, manifolds, hoses, and pressure systems. Maintain pneumatic systems including regulators, solenoids, air cylinders, air dryers, compressors, and valves. Identify leaks and ensure systems are operating efficiently. Facility Maintenance Perform routine facility maintenance including: Plumbing repairs Lighting replacement Door and lock repair/replacement Wall and floor repairs HVAC assistance General building maintenance Compressed air system maintenance Water system maintenance Maintain housekeeping in maintenance areas, shops, and workspaces. Preventative Maintenance Conduct routine equipment inspections to identify potential failures before they occur. Complete preventative maintenance work orders on schedule. Maintain lubrication schedules for all assigned equipment. Recommend improvements to increase equipment reliability and reduce downtime. Assist in root cause analysis for repetitive equipment failures. Documentation Accurately document maintenance activities using Shop Logix, maintenance logs, work orders, and downtime reporting systems. Record parts used, repairs completed, labor hours, and equipment history. Submit Purchase Requests for replacement parts, supplies, and maintenance materials. Maintain organized maintenance records and equipment documentation. Safety & Compliance Strictly follow all Lockout/Tagout (LOTO) procedures. Follow OSHA regulations, NFPA 70E electrical safety standards, and all company safety policies. Wear required Personal Protective Equipment (PPE) at all times. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain a clean, safe, and organized work environment. Report unsafe conditions immediately. Continuous Improvement Support Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and Continuous Improvement initiatives. Assist engineering and production teams during equipment installations, upgrades, and process improvements. Participate in equipment reliability projects and process optimization efforts. Cross-train with other maintenance technicians to support plant operations. Other Duties Respond to maintenance calls during production shifts as required. Assist production personnel with machine startups and changeovers. Train operators on basic equipment care and preventative maintenance practices. Perform other duties as assigned. Required Qualifications Education High School Diploma or GED required. Technical, vocational, or trade school certification in Industrial Maintenance, Mechatronics, Electrical Technology, Mechanical Technology, or related field preferred. Experience Two to five (2-5) years of industrial maintenance experience in a manufacturing, packaging, plastics, or distribution environment preferred. Experience working with extrusion blow molding equipment is highly desirable. Experience in a fast-paced manufacturing environment preferred. Knowledge, Skills & Abilities Strong mechanical troubleshooting skills. Strong electrical troubleshooting skills. Ability to read blueprints, electrical schematics, hydraulic diagrams, and pneumatic prints. Knowledge of industrial electrical systems (120V-480V). Experience troubleshooting PLC-controlled equipment (Allen-Bradley, Siemens preferred). Understanding of Variable Frequency Drives (VFDs), motor controls, sensors, and automation systems. Knowledge of hydraulic, pneumatic, vacuum, and compressed air systems. Basic welding and fabrication experience (MIG, TIG, Stick preferred). Ability to safely operate hand tools, power tools, welders, cutting torches, grinders, and diagnostic equipment. Excellent troubleshooting and problem-solving skills. Strong communication and teamwork skills. Ability to prioritize multiple repairs in a fast-paced manufacturing environment. Basic computer proficiency including Microsoft Office and computerized maintenance management systems (CMMS). Physical Requirements The employee must be able to: Frequently stand and walk for extended periods. Frequently bend, kneel, crouch, crawl, climb ladders, and work in elevated areas. Lift, push, pull, and carry up to 50 pounds regularly and heavier items with assistance. Work in hot, cold, noisy, dusty, and manufacturing environments. Work around moving mechanical equipment while following all required safety procedures. Use hand and power tools safely and effectively. Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, hard hats, steel-toed footwear, respirators, and arc flash protection as required. Working Conditions This position is performed primarily in an industrial manufacturing environment. The employee will be exposed to moving machinery, forklifts, overhead cranes, elevated work platforms, varying temperatures, dust, noise, oils, lubricants, and chemicals commonly associated with plastics manufacturing and industrial maintenance. Overtime, weekends, holidays, and emergency call-ins may be required to support production demands. Preferred Certifications OSHA 10 or OSHA 30 Lockout/Tagout (LOTO) Training NFPA 70E Electrical Safety Training Forklift Certification Aerial Lift/Scissor Lift Certification Welding Certification (preferred) PLC Training (Allen-Bradley and/or Siemens) First Aid/CPR Certification (preferred) Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status . click apply for full job details
Express Employment Professionals
Manufacturing Maintenance Technician
Express Employment Professionals Georgetown, Texas
Job Description Job Description Location: Georgetown, TX Pay: $28-$35+/hr DOE + Shift Differential Job Type: Full-Time Shifts: 2nd & 3rd Shifts Available Experience: 3-5 Years Preferred Now Hiring Industrial Maintenance Technicians! A growing manufacturing company in Georgetown, TX is hiring experienced Maintenance Technicians for all three shifts! We're looking for mechanically skilled individuals with a strong background in plastic injection molding, industrial equipment repair, and preventative maintenance . If you have experience maintaining injection molding machines, troubleshooting electrical or hydraulic systems, and keeping production equipment running, we want to hear from you! What You'll Do Perform preventative maintenance (PM) on plastic injection molding machines and production equipment. Troubleshoot and repair mechanical, electrical, and hydraulic systems. Diagnose equipment breakdowns and minimize production downtime. Maintain and repair injection molding machines and automated equipment. Troubleshoot PLCs, motors, sensors, and electrical components. Read electrical schematics, blueprints, and mechanical drawings. Inspect, lubricate, adjust, and replace machine components. Document maintenance activities and equipment repairs. Follow safety procedures and maintain a clean work environment. What We're Looking For Plastic injection molding maintenance experience is highly preferred. 3-5 years of industrial or manufacturing maintenance experience preferred. Strong knowledge of machine preventative maintenance and troubleshooting . Experience with electrical, mechanical, and hydraulic repairs. Familiarity with PLCs and automated manufacturing equipment. Experience with Engel injection molding machines is a plus. Ability to troubleshoot equipment independently. Strong mechanical aptitude and problem-solving skills. Reliable, safety-focused, and comfortable working in a manufacturing environment. Available Shifts & Pay 2nd Shift: Evening Shift + Shift Differential 3rd Shift: Overnight Shift + Shift Differential Company Description For nearly 30 years, the vision of Express Employment Professionals has been to help people find jobs and help businesses find the people and human resource services they need. We accomplish this vision through a network of more than 600 franchise locations in the United States, Canada, and South Africa. Each Express Employment Professionals office is locally owned and operated and backed by the expertise and support of an international headquarters. Simply put, Express is large enough to meet your employment needs, yet small enough to care. Company Description For nearly 30 years, the vision of Express Employment Professionals has been to help people find jobs and help businesses find the people and human resource services they need. We accomplish this vision through a network of more than 600 franchise locations in the United States, Canada, and South Africa. Each Express Employment Professionals office is locally owned and operated and backed by the expertise and support of an international headquarters. Simply put, Express is large enough to meet your employment needs, yet small enough to care.
11/17/2026
Full time
Job Description Job Description Location: Georgetown, TX Pay: $28-$35+/hr DOE + Shift Differential Job Type: Full-Time Shifts: 2nd & 3rd Shifts Available Experience: 3-5 Years Preferred Now Hiring Industrial Maintenance Technicians! A growing manufacturing company in Georgetown, TX is hiring experienced Maintenance Technicians for all three shifts! We're looking for mechanically skilled individuals with a strong background in plastic injection molding, industrial equipment repair, and preventative maintenance . If you have experience maintaining injection molding machines, troubleshooting electrical or hydraulic systems, and keeping production equipment running, we want to hear from you! What You'll Do Perform preventative maintenance (PM) on plastic injection molding machines and production equipment. Troubleshoot and repair mechanical, electrical, and hydraulic systems. Diagnose equipment breakdowns and minimize production downtime. Maintain and repair injection molding machines and automated equipment. Troubleshoot PLCs, motors, sensors, and electrical components. Read electrical schematics, blueprints, and mechanical drawings. Inspect, lubricate, adjust, and replace machine components. Document maintenance activities and equipment repairs. Follow safety procedures and maintain a clean work environment. What We're Looking For Plastic injection molding maintenance experience is highly preferred. 3-5 years of industrial or manufacturing maintenance experience preferred. Strong knowledge of machine preventative maintenance and troubleshooting . Experience with electrical, mechanical, and hydraulic repairs. Familiarity with PLCs and automated manufacturing equipment. Experience with Engel injection molding machines is a plus. Ability to troubleshoot equipment independently. Strong mechanical aptitude and problem-solving skills. Reliable, safety-focused, and comfortable working in a manufacturing environment. Available Shifts & Pay 2nd Shift: Evening Shift + Shift Differential 3rd Shift: Overnight Shift + Shift Differential Company Description For nearly 30 years, the vision of Express Employment Professionals has been to help people find jobs and help businesses find the people and human resource services they need. We accomplish this vision through a network of more than 600 franchise locations in the United States, Canada, and South Africa. Each Express Employment Professionals office is locally owned and operated and backed by the expertise and support of an international headquarters. Simply put, Express is large enough to meet your employment needs, yet small enough to care. Company Description For nearly 30 years, the vision of Express Employment Professionals has been to help people find jobs and help businesses find the people and human resource services they need. We accomplish this vision through a network of more than 600 franchise locations in the United States, Canada, and South Africa. Each Express Employment Professionals office is locally owned and operated and backed by the expertise and support of an international headquarters. Simply put, Express is large enough to meet your employment needs, yet small enough to care.
Advanced Molding Technologies, LLC
Process Technician III - 3rd Shift Sun-Thur 10pm-6:30am
Advanced Molding Technologies, LLC Circle Pines, Minnesota
Compensation: $42.55 to $51.75 per hour (inclusive of $37.00 to $45.00 hourly base plus 15% shift premium for 3rd shift). Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Schedule: 3rd shift (10:00pm - 6:30am Sunday through Thursday) Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Position Summary: The Senior Process Technician serves as a technical expert in injection molding setup, troubleshooting, and process optimization. This position ensures molding processes operate within validated and documented parameters while supporting productivity, quality, and safety objectives in a regulated medical device manufacturing environment. The Senior Process Technician provides advanced technical support, leads troubleshooting efforts, assists with development samples when needed, and mentors Process Technicians I and II. This role requires consistent compliance with ISO 13485, ISO 9001, cGMP, and all company Quality Management System (QMS) procedures. Essential Duties and Responsibilities: Perform and verify setups as needed, including both routine and complex molding setups, ensuring adherence to approved parameters and work instructions. Assist and mentor Process Technician I and II employees during setups and startups, providing guidance and verification to ensure correct procedures are followed. Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Troubleshoot complex molding, tooling, and equipment issues to determine root cause and implement corrective actions or escalate appropriately. Collaborate closely with Engineering, Quality, and Maintenance to resolve process deviations, nonconformances, and equipment-related issues. Review and verify accuracy of Standard Work Instructions (SWIs), Master Process Sheets, and process documentation; coordinate with Engineering or Document Control when corrections or updates are needed. Support development sampling and validation activities as assigned, assisting with setup, documentation, and process adjustments under Engineering or Process Development direction. Apply scientific molding principles and data-driven methods during troubleshooting and process improvement efforts. Ensure all process-related documentation is complete, accurate, and compliant with GDP and QMS standards. Write, review, and track Tooling Work Orders (TWOs) for tooling or process issues requiring maintenance or engineering attention. Verify that all relevant process and maintenance documentation is completed correctly by Process Technicians I and II. Support QMS initiatives including CAPA, NCR investigations, internal audit readiness, and continuous improvement documentation. Participate in or lead small-scale continuous improvement projects to enhance efficiency, product quality, or safety. Partner with Production Supervisors to ensure smooth shift transitions, effective communication, and adherence to production schedules. Demonstrate and enforce proper cleanroom and contamination control procedures in both cleanroom and general production areas. Other duties as assigned Knowledge, Skills, and Abilities: Expert-level understanding of injection molding processes, tooling, materials, and auxiliary equipment. Strong knowledge of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficiency in root-cause analysis and troubleshooting techniques. Ability to interpret process data, setup sheets, validation reports, and engineering drawings. Working knowledge of scientific molding principles, data collection, and process control. Demonstrated leadership, mentoring, and team collaboration skills. Strong attention to detail and accuracy in documentation and communication. Effective cross-functional collaboration with Engineering, Quality, and Production departments. Commitment to workplace safety, product quality, and regulatory compliance. Education and Experience Requirements: High school diploma or equivalent required; associate or technical degree in plastics, manufacturing, or engineering technology preferred. 5 or more years of experience in injection molding, including process setup, troubleshooting, and optimization. Experience in a medical device or other regulated manufacturing environment required. Completion of AIM Molding II required (or obtained within defined timeframe). Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Exposure to moderate heat, noise, and occasional airborne particulates during purging, maintenance, or repair activities. Must remain alert and safety-focused when working around moving machinery, overhead loads, and energized equipment. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 42.55-51.75 Hourly Wage PI1e94298ed0ea-3032
11/17/2026
Full time
Compensation: $42.55 to $51.75 per hour (inclusive of $37.00 to $45.00 hourly base plus 15% shift premium for 3rd shift). Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Schedule: 3rd shift (10:00pm - 6:30am Sunday through Thursday) Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Position Summary: The Senior Process Technician serves as a technical expert in injection molding setup, troubleshooting, and process optimization. This position ensures molding processes operate within validated and documented parameters while supporting productivity, quality, and safety objectives in a regulated medical device manufacturing environment. The Senior Process Technician provides advanced technical support, leads troubleshooting efforts, assists with development samples when needed, and mentors Process Technicians I and II. This role requires consistent compliance with ISO 13485, ISO 9001, cGMP, and all company Quality Management System (QMS) procedures. Essential Duties and Responsibilities: Perform and verify setups as needed, including both routine and complex molding setups, ensuring adherence to approved parameters and work instructions. Assist and mentor Process Technician I and II employees during setups and startups, providing guidance and verification to ensure correct procedures are followed. Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Troubleshoot complex molding, tooling, and equipment issues to determine root cause and implement corrective actions or escalate appropriately. Collaborate closely with Engineering, Quality, and Maintenance to resolve process deviations, nonconformances, and equipment-related issues. Review and verify accuracy of Standard Work Instructions (SWIs), Master Process Sheets, and process documentation; coordinate with Engineering or Document Control when corrections or updates are needed. Support development sampling and validation activities as assigned, assisting with setup, documentation, and process adjustments under Engineering or Process Development direction. Apply scientific molding principles and data-driven methods during troubleshooting and process improvement efforts. Ensure all process-related documentation is complete, accurate, and compliant with GDP and QMS standards. Write, review, and track Tooling Work Orders (TWOs) for tooling or process issues requiring maintenance or engineering attention. Verify that all relevant process and maintenance documentation is completed correctly by Process Technicians I and II. Support QMS initiatives including CAPA, NCR investigations, internal audit readiness, and continuous improvement documentation. Participate in or lead small-scale continuous improvement projects to enhance efficiency, product quality, or safety. Partner with Production Supervisors to ensure smooth shift transitions, effective communication, and adherence to production schedules. Demonstrate and enforce proper cleanroom and contamination control procedures in both cleanroom and general production areas. Other duties as assigned Knowledge, Skills, and Abilities: Expert-level understanding of injection molding processes, tooling, materials, and auxiliary equipment. Strong knowledge of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficiency in root-cause analysis and troubleshooting techniques. Ability to interpret process data, setup sheets, validation reports, and engineering drawings. Working knowledge of scientific molding principles, data collection, and process control. Demonstrated leadership, mentoring, and team collaboration skills. Strong attention to detail and accuracy in documentation and communication. Effective cross-functional collaboration with Engineering, Quality, and Production departments. Commitment to workplace safety, product quality, and regulatory compliance. Education and Experience Requirements: High school diploma or equivalent required; associate or technical degree in plastics, manufacturing, or engineering technology preferred. 5 or more years of experience in injection molding, including process setup, troubleshooting, and optimization. Experience in a medical device or other regulated manufacturing environment required. Completion of AIM Molding II required (or obtained within defined timeframe). Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Exposure to moderate heat, noise, and occasional airborne particulates during purging, maintenance, or repair activities. Must remain alert and safety-focused when working around moving machinery, overhead loads, and energized equipment. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 42.55-51.75 Hourly Wage PI1e94298ed0ea-3032

Modal Window

  • Blog
  • Contact
  • About Us
  • Terms & Conditions
  • Privacy
  • Employer
  • Post a Job
  • Search Resumes
  • Sign in
  • Job Seeker
  • Find Jobs
  • Create Resume
  • Sign in
  • Facebook
  • Twitter
  • Instagram
  • Pinterest
  • Youtube
Parent and Partner sites: IT Job Board | Search Jobs Near Me | RightTalent.co.uk | Quantity Surveyor jobs | Building Surveyor jobs | Construction Recruitment | Talent Recruiter | London Jobs | Property jobs
© 2008-2026 My Jobs Near Me