Jobs Near Me
  • Home
  • Search Jobs
  • Register CV
  • Post a Job
  • Employer Pricing
  • Contact Us
  • Sign in
  • Sign up
  • Home
  • Search Jobs
  • Register CV
  • Post a Job
  • Employer Pricing
  • Contact Us
Sorry, that job is no longer available. Here are some results that may be similar to the job you were looking for.

41 jobs found

Email me jobs like this
Refine Search
Current Search
1st shift production supervisor
Advanced Molding Technologies, LLC
Process Technician II - $28 - $37 Hourly Wage
Advanced Molding Technologies, LLC Circle Pines, Minnesota
Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Schedule: 1st Shift (Monday-Friday 6:00am to 2:30pm) Compensation: The hourly pay range for this position is $28.00 to $37.00. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: Process Technician II performs setup, startup, and troubleshooting activities for injection molding operations. This role supports continuous production, ensuring processes remain within validated parameters, and collaborates with Quality, Engineering, and Maintenance to resolve technical and quality-related issues. The Process Technician II also assists in mentoring Level I technicians, contributes to process optimization, and ensures compliance with ISO 13485, ISO 9001, cGMP, and internal QMS standards. Essential Duties and Responsibilities: Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Perform in-process troubleshooting to resolve molding, machine, and auxiliary equipment issues promptly and effectively. Perform setups independently as required to support production schedules or coverage needs, including both routine and moderately complex setups, depending on production needs. Assist Process Technician I employees during setups as needed by providing hands-on guidance, troubleshooting support, and verification to ensure proper procedures are followed. Collaborate with Engineering and Quality to address process or product issues and implement corrective actions. Execute proper shutdowns including purging, material changes, and documentation handoff. Perform and document work-cell verifications to confirm readiness, cleanliness, and compliance with production standards. Maintain accurate GDP-compliant process logs, maintenance requests, and PQ (Process Qualification) feedback. Ensure all process changes and documentation updates comply with ISO 13485, ISO 9001, and cGMP standards. Support QMS initiatives such as nonconformance reporting, change control, and participation in corrective- and preventive-action (CAPA) activities. Initiate and track to closure Tooling Work Orders (TWOs) as needed to support mold maintenance, tooling repair, and process optimization. Provide feedback on tooling, process, and equipment improvements that enhance quality, safety, and efficiency. Assist in mentoring and training Process Technician I employees in setup, troubleshooting, and documentation practices. Support validation, engineering trials, and new-tooling qualifications when assigned. Participate in small-scale continuous-improvement projects within the production area. Other duties as assigned. Knowledge, Skills, and Abilities: Strong working knowledge of injection-molding equipment, auxiliary systems, and process-control instrumentation. Understanding of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficient in root-cause troubleshooting, process adjustments, and corrective-action implementation. Familiarity with scientific-molding principles and basic data-driven problem-solving. Ability to interpret process documentation, setup sheets, and work instructions. Effective communication and collaboration with Engineering, Quality, Maintenance, and Production teams. Demonstrated leadership and mentoring abilities. Strong organizational skills with attention to documentation accuracy and process discipline. Commitment to safety, product quality, and regulatory compliance. Education and Experience Requirements: High-school diploma or equivalent required; technical certificate or degree in plastics, engineering technology, or related field preferred. 3+ years of recent injection-molding setup and processing experience required; medical-device or other regulated manufacturing experience strongly preferred. Additional training or certifications through AIM/Beaumont, RJG or Paulson are preferred and may be offered through employment Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Ability to work in hot, noisy, or confined areas during machine setup or maintenance activities. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 28-37 Hourly Wage PIeb42d2774b3e-2738
11/22/2026
Full time
Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Schedule: 1st Shift (Monday-Friday 6:00am to 2:30pm) Compensation: The hourly pay range for this position is $28.00 to $37.00. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: Process Technician II performs setup, startup, and troubleshooting activities for injection molding operations. This role supports continuous production, ensuring processes remain within validated parameters, and collaborates with Quality, Engineering, and Maintenance to resolve technical and quality-related issues. The Process Technician II also assists in mentoring Level I technicians, contributes to process optimization, and ensures compliance with ISO 13485, ISO 9001, cGMP, and internal QMS standards. Essential Duties and Responsibilities: Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Perform in-process troubleshooting to resolve molding, machine, and auxiliary equipment issues promptly and effectively. Perform setups independently as required to support production schedules or coverage needs, including both routine and moderately complex setups, depending on production needs. Assist Process Technician I employees during setups as needed by providing hands-on guidance, troubleshooting support, and verification to ensure proper procedures are followed. Collaborate with Engineering and Quality to address process or product issues and implement corrective actions. Execute proper shutdowns including purging, material changes, and documentation handoff. Perform and document work-cell verifications to confirm readiness, cleanliness, and compliance with production standards. Maintain accurate GDP-compliant process logs, maintenance requests, and PQ (Process Qualification) feedback. Ensure all process changes and documentation updates comply with ISO 13485, ISO 9001, and cGMP standards. Support QMS initiatives such as nonconformance reporting, change control, and participation in corrective- and preventive-action (CAPA) activities. Initiate and track to closure Tooling Work Orders (TWOs) as needed to support mold maintenance, tooling repair, and process optimization. Provide feedback on tooling, process, and equipment improvements that enhance quality, safety, and efficiency. Assist in mentoring and training Process Technician I employees in setup, troubleshooting, and documentation practices. Support validation, engineering trials, and new-tooling qualifications when assigned. Participate in small-scale continuous-improvement projects within the production area. Other duties as assigned. Knowledge, Skills, and Abilities: Strong working knowledge of injection-molding equipment, auxiliary systems, and process-control instrumentation. Understanding of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficient in root-cause troubleshooting, process adjustments, and corrective-action implementation. Familiarity with scientific-molding principles and basic data-driven problem-solving. Ability to interpret process documentation, setup sheets, and work instructions. Effective communication and collaboration with Engineering, Quality, Maintenance, and Production teams. Demonstrated leadership and mentoring abilities. Strong organizational skills with attention to documentation accuracy and process discipline. Commitment to safety, product quality, and regulatory compliance. Education and Experience Requirements: High-school diploma or equivalent required; technical certificate or degree in plastics, engineering technology, or related field preferred. 3+ years of recent injection-molding setup and processing experience required; medical-device or other regulated manufacturing experience strongly preferred. Additional training or certifications through AIM/Beaumont, RJG or Paulson are preferred and may be offered through employment Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Ability to work in hot, noisy, or confined areas during machine setup or maintenance activities. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 28-37 Hourly Wage PIeb42d2774b3e-2738
Sanitation Supervisor- 1st shift
Maker's Pride Grand Rapids, Michigan
GENERAL SUMMARY A Sanitation Supervisor enforces the policies and procedures surrounding the food safety and hygiene. She/he examines all manufacturing equipment to ensure that it works properly and meets all governmental standards. In instances of violations, develops a plan to correct the situation. Possessing a keen understanding of industry regulations, he/she consults with management to address compliance issues and make recommendations to improve processes. Maintains a working relationship with chemical and pest control vendors. Developing training programs related to sanitation practices and company best practices, this individual also delivers these initiatives to employees in one-on-one and group settings. A Sanitation Supervisor keeps detailed records of all sanitation-related activities and issues, such as inspections and violations, also noting how and when each situation was resolved. The Sanitation Supervisor ensures that all Safety, Quality (related to Sanitation), Continuous Improvement and Cost expectations are delivered. The Sanitation Supervisor drives the sustainable improvements across the shift, working closely with the plant leadership and plant employees to achieve results. This position requires hands-on leadership. ESSENTIAL DUTIES AND RESPONSIBILITIES Overseeing the sanitation process Ensuring that health and safety guidelines are followed, and that continual improvement is made towards an injury free operation. Ensure key performance indicators in Sanitation areas are met or exceeded. Ensuring that the Sanitation process is cost effective, reliable, and meets all associated targets. Develop and track improvement in the use and efficiency of Sanitation labor resources. Coordinate set up and implement standard operating procedure for key Sanitation operations. Ensure that Sanitation does not detract from products are produced on time and are of good quality. Manage the adherence to prescribed procedures to ensure that quality (relating to sanitation) meets or exceeds planned goals. Work with Quality Manager/Supervisor to ensure that adequate processes are capable and improving. Ensure that human resources required to accomplish sanitation tasks are available; ensure that material resources (chemicals, tools, etc.) needed are available. Work with the Maintenance, Quality and Production to ensure sanitation related equipment PM's (e.g. PEC's) are completed timely as well as develop a good working relationship between production and maintenance personnel. Ensure complete compliance to GMP's and 5S processes. Work with the Sanitation Manager to estimate labor and operational costs for on-going operation and for new projects. Track competencies of subordinates and provide leadership and development as required to achieve the objectives. Monitor the Sanitation processes and adjusting schedules as needed. Implement and drive continuous improvement activities through implementation of change management process and best practices. Liaise among different departments, e.g. other departments, corporate resources, other plants, suppliers, etc. Optimize resource utilization by implementation of an effective Sanitation organization. Ensure coaching and development of team and other key resources to meet business's objectives. Supervise and motivate teams of workers. Review the performance of subordinates. Assists with the management of the Master Sanitation Schedule and Action Item Logs. Responsible for the titration testing of all chemicals needing titrated. Other duties as identified or assigned by Sanitation Manager. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Make sound business decisions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on your assigned shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. Position requires the ability to work in high temperature areas and work at heights more than 2' from the ground on a scissor lift. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work in a fast-paced environment. Be fast and flexible. LANGUAGE SKILLS Able to communicate and take direction from the Sanitation Manager. Bilingual Spanish/English is helpful. EDUCATION and/or EXPERIENCE 3 or more years of sanitation, food safety or quality supervisory experience in a food or beverage manufacturing environment. Large scale manufacturing experience a plus. Results oriented, possess strong interpersonal skills, be a team player as well as an independent worker and have strong and effective verbal and written communication skills. This person should be recognized as a leader capable of driving excellence. Possess leadership skills as well as an appropriate amount of technical skills in a high-speed manufacturing environment. A knowledge of LEAN Manufacturing techniques and related CI tools are required: I.e., Root Cause Analysis, Agile, Kaizen Events, Blitz, Value Stream Mapping, OEE, First Hour Full Power, Labor Analysis, 5S, 7 Forms of Waste, Pit Stop Changeovers, etc. Proficient in Microsoft Office applications and have some experience and/or the ability to learn associated corporate enterprise software systems to analyze and track data as well as ensuring the sanitation organization understands key operational information. Understanding of Master Sanitation Schedules. Demonstrated experience training teams is preferred. GMP (Good Manufacturing Practices) knowledge is required. Experience with SQF or BRC audit prep and ATP swab experience is a bonus. SUPERVISORY RESPONSIBILITIES The Sanitation Supervisor has direct reports consisting of group leaders, contract employees, and regular full-time employees. The shift crew consists of both Maker's Pride regular employees as well as contract employees. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Maker's Pride is an Equal Opportunity Employer.
11/22/2026
Full time
GENERAL SUMMARY A Sanitation Supervisor enforces the policies and procedures surrounding the food safety and hygiene. She/he examines all manufacturing equipment to ensure that it works properly and meets all governmental standards. In instances of violations, develops a plan to correct the situation. Possessing a keen understanding of industry regulations, he/she consults with management to address compliance issues and make recommendations to improve processes. Maintains a working relationship with chemical and pest control vendors. Developing training programs related to sanitation practices and company best practices, this individual also delivers these initiatives to employees in one-on-one and group settings. A Sanitation Supervisor keeps detailed records of all sanitation-related activities and issues, such as inspections and violations, also noting how and when each situation was resolved. The Sanitation Supervisor ensures that all Safety, Quality (related to Sanitation), Continuous Improvement and Cost expectations are delivered. The Sanitation Supervisor drives the sustainable improvements across the shift, working closely with the plant leadership and plant employees to achieve results. This position requires hands-on leadership. ESSENTIAL DUTIES AND RESPONSIBILITIES Overseeing the sanitation process Ensuring that health and safety guidelines are followed, and that continual improvement is made towards an injury free operation. Ensure key performance indicators in Sanitation areas are met or exceeded. Ensuring that the Sanitation process is cost effective, reliable, and meets all associated targets. Develop and track improvement in the use and efficiency of Sanitation labor resources. Coordinate set up and implement standard operating procedure for key Sanitation operations. Ensure that Sanitation does not detract from products are produced on time and are of good quality. Manage the adherence to prescribed procedures to ensure that quality (relating to sanitation) meets or exceeds planned goals. Work with Quality Manager/Supervisor to ensure that adequate processes are capable and improving. Ensure that human resources required to accomplish sanitation tasks are available; ensure that material resources (chemicals, tools, etc.) needed are available. Work with the Maintenance, Quality and Production to ensure sanitation related equipment PM's (e.g. PEC's) are completed timely as well as develop a good working relationship between production and maintenance personnel. Ensure complete compliance to GMP's and 5S processes. Work with the Sanitation Manager to estimate labor and operational costs for on-going operation and for new projects. Track competencies of subordinates and provide leadership and development as required to achieve the objectives. Monitor the Sanitation processes and adjusting schedules as needed. Implement and drive continuous improvement activities through implementation of change management process and best practices. Liaise among different departments, e.g. other departments, corporate resources, other plants, suppliers, etc. Optimize resource utilization by implementation of an effective Sanitation organization. Ensure coaching and development of team and other key resources to meet business's objectives. Supervise and motivate teams of workers. Review the performance of subordinates. Assists with the management of the Master Sanitation Schedule and Action Item Logs. Responsible for the titration testing of all chemicals needing titrated. Other duties as identified or assigned by Sanitation Manager. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Make sound business decisions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on your assigned shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. Position requires the ability to work in high temperature areas and work at heights more than 2' from the ground on a scissor lift. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work in a fast-paced environment. Be fast and flexible. LANGUAGE SKILLS Able to communicate and take direction from the Sanitation Manager. Bilingual Spanish/English is helpful. EDUCATION and/or EXPERIENCE 3 or more years of sanitation, food safety or quality supervisory experience in a food or beverage manufacturing environment. Large scale manufacturing experience a plus. Results oriented, possess strong interpersonal skills, be a team player as well as an independent worker and have strong and effective verbal and written communication skills. This person should be recognized as a leader capable of driving excellence. Possess leadership skills as well as an appropriate amount of technical skills in a high-speed manufacturing environment. A knowledge of LEAN Manufacturing techniques and related CI tools are required: I.e., Root Cause Analysis, Agile, Kaizen Events, Blitz, Value Stream Mapping, OEE, First Hour Full Power, Labor Analysis, 5S, 7 Forms of Waste, Pit Stop Changeovers, etc. Proficient in Microsoft Office applications and have some experience and/or the ability to learn associated corporate enterprise software systems to analyze and track data as well as ensuring the sanitation organization understands key operational information. Understanding of Master Sanitation Schedules. Demonstrated experience training teams is preferred. GMP (Good Manufacturing Practices) knowledge is required. Experience with SQF or BRC audit prep and ATP swab experience is a bonus. SUPERVISORY RESPONSIBILITIES The Sanitation Supervisor has direct reports consisting of group leaders, contract employees, and regular full-time employees. The shift crew consists of both Maker's Pride regular employees as well as contract employees. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Maker's Pride is an Equal Opportunity Employer.
Sanitation Supervisor-1st shift
Maker's Pride Grand Rapids, Michigan
GENERAL SUMMARY A Sanitation Supervisor enforces the policies and procedures surrounding the food safety and hygiene. She/he examines all manufacturing equipment to ensure that it works properly and meets all governmental standards. In instances of violations, develops a plan to correct the situation. Possessing a keen understanding of industry regulations, he/she consults with management to address compliance issues and make recommendations to improve processes. Maintains a working relationship with chemical and pest control vendors. Developing training programs related to sanitation practices and company best practices, this individual also delivers these initiatives to employees in one-on-one and group settings. A Sanitation Supervisor keeps detailed records of all sanitation-related activities and issues, such as inspections and violations, also noting how and when each situation was resolved. The Sanitation Supervisor ensures that all Safety, Quality (related to Sanitation), Continuous Improvement and Cost expectations are delivered. The Sanitation Supervisor drives the sustainable improvements across the shift, working closely with the plant leadership and plant employees to achieve results. This position requires hands-on leadership. ESSENTIAL DUTIES AND RESPONSIBILITIES Overseeing the sanitation process Ensuring that health and safety guidelines are followed, and that continual improvement is made towards an injury free operation. Ensure key performance indicators in Sanitation areas are met or exceeded. Ensuring that the Sanitation process is cost effective, reliable, and meets all associated targets. Develop and track improvement in the use and efficiency of Sanitation labor resources. Coordinate set up and implement standard operating procedure for key Sanitation operations. Ensure that Sanitation does not detract from products are produced on time and are of good quality. Manage the adherence to prescribed procedures to ensure that quality (relating to sanitation) meets or exceeds planned goals. Work with Quality Manager/Supervisor to ensure that adequate processes are capable and improving. Ensure that human resources required to accomplish sanitation tasks are available; ensure that material resources (chemicals, tools, etc.) needed are available. Work with the Maintenance, Quality and Production to ensure sanitation related equipment PM's (e.g. PEC's) are completed timely as well as develop a good working relationship between production and maintenance personnel. Ensure complete compliance to GMP's and 5S processes. Work with the Sanitation Manager to estimate labor and operational costs for on-going operation and for new projects. Track competencies of subordinates and provide leadership and development as required to achieve the objectives. Monitor the Sanitation processes and adjusting schedules as needed. Implement and drive continuous improvement activities through implementation of change management process and best practices. Liaise among different departments, e.g. other departments, corporate resources, other plants, suppliers, etc. Optimize resource utilization by implementation of an effective Sanitation organization. Ensure coaching and development of team and other key resources to meet business's objectives. Supervise and motivate teams of workers. Review the performance of subordinates. Assists with the management of the Master Sanitation Schedule and Action Item Logs. Responsible for the titration testing of all chemicals needing titrated. Other duties as identified or assigned by Sanitation Manager. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Make sound business decisions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on your assigned shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. Position requires the ability to work in high temperature areas and work at heights more than 2' from the ground on a scissor lift. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work in a fast-paced environment. Be fast and flexible. LANGUAGE SKILLS Able to communicate and take direction from the Sanitation Manager. Bilingual Spanish/English is helpful. EDUCATION and/or EXPERIENCE 3 or more years of sanitation, food safety or quality supervisory experience in a food or beverage manufacturing environment. Large scale manufacturing experience a plus. Results oriented, possess strong interpersonal skills, be a team player as well as an independent worker and have strong and effective verbal and written communication skills. This person should be recognized as a leader capable of driving excellence. Possess leadership skills as well as an appropriate amount of technical skills in a high-speed manufacturing environment. A knowledge of LEAN Manufacturing techniques and related CI tools are required: I.e., Root Cause Analysis, Agile, Kaizen Events, Blitz, Value Stream Mapping, OEE, First Hour Full Power, Labor Analysis, 5S, 7 Forms of Waste, Pit Stop Changeovers, etc. Proficient in Microsoft Office applications and have some experience and/or the ability to learn associated corporate enterprise software systems to analyze and track data as well as ensuring the sanitation organization understands key operational information. Understanding of Master Sanitation Schedules. Demonstrated experience training teams is preferred. GMP (Good Manufacturing Practices) knowledge is required. Experience with SQF or BRC audit prep and ATP swab experience is a bonus. SUPERVISORY RESPONSIBILITIES The Sanitation Supervisor has direct reports consisting of group leaders, contract employees, and regular full-time employees. The shift crew consists of both Maker's Pride regular employees as well as contract employees. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Maker's Pride is an Equal Opportunity Employer.
11/22/2026
Full time
GENERAL SUMMARY A Sanitation Supervisor enforces the policies and procedures surrounding the food safety and hygiene. She/he examines all manufacturing equipment to ensure that it works properly and meets all governmental standards. In instances of violations, develops a plan to correct the situation. Possessing a keen understanding of industry regulations, he/she consults with management to address compliance issues and make recommendations to improve processes. Maintains a working relationship with chemical and pest control vendors. Developing training programs related to sanitation practices and company best practices, this individual also delivers these initiatives to employees in one-on-one and group settings. A Sanitation Supervisor keeps detailed records of all sanitation-related activities and issues, such as inspections and violations, also noting how and when each situation was resolved. The Sanitation Supervisor ensures that all Safety, Quality (related to Sanitation), Continuous Improvement and Cost expectations are delivered. The Sanitation Supervisor drives the sustainable improvements across the shift, working closely with the plant leadership and plant employees to achieve results. This position requires hands-on leadership. ESSENTIAL DUTIES AND RESPONSIBILITIES Overseeing the sanitation process Ensuring that health and safety guidelines are followed, and that continual improvement is made towards an injury free operation. Ensure key performance indicators in Sanitation areas are met or exceeded. Ensuring that the Sanitation process is cost effective, reliable, and meets all associated targets. Develop and track improvement in the use and efficiency of Sanitation labor resources. Coordinate set up and implement standard operating procedure for key Sanitation operations. Ensure that Sanitation does not detract from products are produced on time and are of good quality. Manage the adherence to prescribed procedures to ensure that quality (relating to sanitation) meets or exceeds planned goals. Work with Quality Manager/Supervisor to ensure that adequate processes are capable and improving. Ensure that human resources required to accomplish sanitation tasks are available; ensure that material resources (chemicals, tools, etc.) needed are available. Work with the Maintenance, Quality and Production to ensure sanitation related equipment PM's (e.g. PEC's) are completed timely as well as develop a good working relationship between production and maintenance personnel. Ensure complete compliance to GMP's and 5S processes. Work with the Sanitation Manager to estimate labor and operational costs for on-going operation and for new projects. Track competencies of subordinates and provide leadership and development as required to achieve the objectives. Monitor the Sanitation processes and adjusting schedules as needed. Implement and drive continuous improvement activities through implementation of change management process and best practices. Liaise among different departments, e.g. other departments, corporate resources, other plants, suppliers, etc. Optimize resource utilization by implementation of an effective Sanitation organization. Ensure coaching and development of team and other key resources to meet business's objectives. Supervise and motivate teams of workers. Review the performance of subordinates. Assists with the management of the Master Sanitation Schedule and Action Item Logs. Responsible for the titration testing of all chemicals needing titrated. Other duties as identified or assigned by Sanitation Manager. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Make sound business decisions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on your assigned shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. Position requires the ability to work in high temperature areas and work at heights more than 2' from the ground on a scissor lift. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work in a fast-paced environment. Be fast and flexible. LANGUAGE SKILLS Able to communicate and take direction from the Sanitation Manager. Bilingual Spanish/English is helpful. EDUCATION and/or EXPERIENCE 3 or more years of sanitation, food safety or quality supervisory experience in a food or beverage manufacturing environment. Large scale manufacturing experience a plus. Results oriented, possess strong interpersonal skills, be a team player as well as an independent worker and have strong and effective verbal and written communication skills. This person should be recognized as a leader capable of driving excellence. Possess leadership skills as well as an appropriate amount of technical skills in a high-speed manufacturing environment. A knowledge of LEAN Manufacturing techniques and related CI tools are required: I.e., Root Cause Analysis, Agile, Kaizen Events, Blitz, Value Stream Mapping, OEE, First Hour Full Power, Labor Analysis, 5S, 7 Forms of Waste, Pit Stop Changeovers, etc. Proficient in Microsoft Office applications and have some experience and/or the ability to learn associated corporate enterprise software systems to analyze and track data as well as ensuring the sanitation organization understands key operational information. Understanding of Master Sanitation Schedules. Demonstrated experience training teams is preferred. GMP (Good Manufacturing Practices) knowledge is required. Experience with SQF or BRC audit prep and ATP swab experience is a bonus. SUPERVISORY RESPONSIBILITIES The Sanitation Supervisor has direct reports consisting of group leaders, contract employees, and regular full-time employees. The shift crew consists of both Maker's Pride regular employees as well as contract employees. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Maker's Pride is an Equal Opportunity Employer.
Maintenance Supervisor- 1st shift
Maker's Pride Grand Rapids, Michigan
Job Summary: The 1st shift Maintenance Supervisor is responsible for supervising and executing all aspects of the Maintenance department with customers, suppliers, local and corporate-wide Maker's Pride employees and the manufacturing staff. The incumbent is also responsible for training and mentoring members of the Maintenance department and support the facility. This position exists to ensure the utmost quality of all products being produced and packaged at the plant. Job Duties: Duties may include, but are not limited to the following: • Responsible for the overall direction, coordination and evaluation of these employees. Also, directly supervise non-supervisory (lead/technician) employees. • Carry out supervisory responsibilities in accordance with the organization's policies and applicable federal, state and local laws. Responsibilities include interviewing, hiring and training new employees; planning, assigning and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving issues. • Responsible for maintaining a 5S environment. • Responsible for scheduling, maintaining and approving maintenance employee's work hours daily. Work with employees to investigate any scheduling and/or payroll-related issues. • Responsible for complying with customer service and Company standards. • Reviews production and operating reports and resolves operational, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays. Inspect machines and equipment to ensure specific operational performance and optimum utilization. • Resolves employee complaints or submits unsettled complaints to the Employee & Community Relations Manager for action. Handle all disciplinary actions and employee disputes. • Train, develop and evaluate all employees to meet future needs. • Attend meetings; make presentations, etc. as needed. • Follow Good Manufacturing Practices (GMPs) at all times. • Comply with all safety, health and environmental regulations as prescribed by law. • Comply with all Company rules, regulations and policies. Required Competencies & Knowledge: Knowledge of: • Makers Pride procurement, products and production processes. • Knowledge and experience with EAM and SAP. • Knowledge of OSHA regulations and standards. • Knowledge of NFPA 70E Arc Flash program. • Knowledge of gas-fired ovens including, but not limited to gas trains, pressure switches, safety circuits and zone balancing. Skilled in: • Demonstrated proficiency in electrical knowledge including AC/DC circuits, motor controls and troubleshooting/repair of up to 480-volt systems. • Demonstrated proficiency in PLC troubleshooting (limited programming skilled required). • Demonstrated proficiency in power transmission troubleshooting/repair. • Demonstrated proficiency in reading blueprints (facility and infrastructure), ladder logic and pneumatic. • Conflict resolution. • Prioritize work based on short and long-term objectives. • Successfully analyze and present data to multiple levels of the organization. • Personnel and performance management. Ability to: • Ability to define problems, collects data, establish facts and draw valid conclusions. • Ability to work in a fast-paced environment, while being able to make sound decisions. • Communicate in English to give and acknowledge instructions/problems. • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. • Ability to write routine reports and correspondence. • Ability to interpret a variety of instructions furnished in written, oral, diagram and schedule form. • Ability to respond to common inquiries and complaints from customers, regulatory agencies, employees and members of the business community. • Ability to effectively present information to employees, management and public groups. • Ability to add, subtract, multiply and divide in various units of measure, using whole numbers, common fractions and decimals. • Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Proficiency in: MS Office Suite, EAM and SAP Work Environment: • Ability to work well with others in stressful situations and meet deadlines as necessary. • Ability to handle multiple priorities and tasks. • Receptive to new ideas, concepts and procedures. • Receptive and responsive to constructive criticism. • Maintain harmonious working relations with employees from all departments. • Maintain harmonious working relations with management from all levels. • Communicate effectively with all employees and management. Physical Requirements: • Ability to use hands and fingers. Reaching with hands/arms throughout shift. • Ability to see, hear and talk. Ability to distinguish colors. Ability to work in light to moderate noise levels where hearing protection is required. • May work near moving mechanical parts and may be exposed to fumes, airborne particles and vibration. • Good hand/eye coordination and manual dexterity for repetitive tasks. • Ability to lift/move up to 50 lbs. Push/pull items up to 2600 lbs. with assistance. • Walk up to 100 yards to work and break areas. • May climb steps to and from work and break areas. • Repetitive reaching overhead, under and across throughout shift. • Repetitive bending, stooping and twisting throughout shift. • May crawl under equipment to reach work area. • Stand eight hours per shift. • Physical and mental ability to work in excess of 40 hours per week. • Perform general housekeeping, including sweeping, mopping, etc. • Ability to work in variable temperatures and weather conditions. Ability to work in wet, humid areas. Minimum Qualifications: • (3) Three - (5) Five years supervisory experience in a manufacturing environment. • Two-year college degree in business or related field preferred; Four-year college degree a plus. • Experience in a non-union manufacturing environment a plus. • Proficient in MS Office applications such as Excel, Outlook, PowerPoint and Word. • Excellent communication, conflict management, decision-making, motivational and organizational skills required. • Strong self-confidence and leadership skills required. Sponsorship for work authorization is not available for this position. It is the candidate's responsibility to ensure they are legally authorized to work in the location to which they apply. Maker's Pride is an Equal Opportunity Employer.
11/22/2026
Full time
Job Summary: The 1st shift Maintenance Supervisor is responsible for supervising and executing all aspects of the Maintenance department with customers, suppliers, local and corporate-wide Maker's Pride employees and the manufacturing staff. The incumbent is also responsible for training and mentoring members of the Maintenance department and support the facility. This position exists to ensure the utmost quality of all products being produced and packaged at the plant. Job Duties: Duties may include, but are not limited to the following: • Responsible for the overall direction, coordination and evaluation of these employees. Also, directly supervise non-supervisory (lead/technician) employees. • Carry out supervisory responsibilities in accordance with the organization's policies and applicable federal, state and local laws. Responsibilities include interviewing, hiring and training new employees; planning, assigning and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving issues. • Responsible for maintaining a 5S environment. • Responsible for scheduling, maintaining and approving maintenance employee's work hours daily. Work with employees to investigate any scheduling and/or payroll-related issues. • Responsible for complying with customer service and Company standards. • Reviews production and operating reports and resolves operational, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays. Inspect machines and equipment to ensure specific operational performance and optimum utilization. • Resolves employee complaints or submits unsettled complaints to the Employee & Community Relations Manager for action. Handle all disciplinary actions and employee disputes. • Train, develop and evaluate all employees to meet future needs. • Attend meetings; make presentations, etc. as needed. • Follow Good Manufacturing Practices (GMPs) at all times. • Comply with all safety, health and environmental regulations as prescribed by law. • Comply with all Company rules, regulations and policies. Required Competencies & Knowledge: Knowledge of: • Makers Pride procurement, products and production processes. • Knowledge and experience with EAM and SAP. • Knowledge of OSHA regulations and standards. • Knowledge of NFPA 70E Arc Flash program. • Knowledge of gas-fired ovens including, but not limited to gas trains, pressure switches, safety circuits and zone balancing. Skilled in: • Demonstrated proficiency in electrical knowledge including AC/DC circuits, motor controls and troubleshooting/repair of up to 480-volt systems. • Demonstrated proficiency in PLC troubleshooting (limited programming skilled required). • Demonstrated proficiency in power transmission troubleshooting/repair. • Demonstrated proficiency in reading blueprints (facility and infrastructure), ladder logic and pneumatic. • Conflict resolution. • Prioritize work based on short and long-term objectives. • Successfully analyze and present data to multiple levels of the organization. • Personnel and performance management. Ability to: • Ability to define problems, collects data, establish facts and draw valid conclusions. • Ability to work in a fast-paced environment, while being able to make sound decisions. • Communicate in English to give and acknowledge instructions/problems. • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. • Ability to write routine reports and correspondence. • Ability to interpret a variety of instructions furnished in written, oral, diagram and schedule form. • Ability to respond to common inquiries and complaints from customers, regulatory agencies, employees and members of the business community. • Ability to effectively present information to employees, management and public groups. • Ability to add, subtract, multiply and divide in various units of measure, using whole numbers, common fractions and decimals. • Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Proficiency in: MS Office Suite, EAM and SAP Work Environment: • Ability to work well with others in stressful situations and meet deadlines as necessary. • Ability to handle multiple priorities and tasks. • Receptive to new ideas, concepts and procedures. • Receptive and responsive to constructive criticism. • Maintain harmonious working relations with employees from all departments. • Maintain harmonious working relations with management from all levels. • Communicate effectively with all employees and management. Physical Requirements: • Ability to use hands and fingers. Reaching with hands/arms throughout shift. • Ability to see, hear and talk. Ability to distinguish colors. Ability to work in light to moderate noise levels where hearing protection is required. • May work near moving mechanical parts and may be exposed to fumes, airborne particles and vibration. • Good hand/eye coordination and manual dexterity for repetitive tasks. • Ability to lift/move up to 50 lbs. Push/pull items up to 2600 lbs. with assistance. • Walk up to 100 yards to work and break areas. • May climb steps to and from work and break areas. • Repetitive reaching overhead, under and across throughout shift. • Repetitive bending, stooping and twisting throughout shift. • May crawl under equipment to reach work area. • Stand eight hours per shift. • Physical and mental ability to work in excess of 40 hours per week. • Perform general housekeeping, including sweeping, mopping, etc. • Ability to work in variable temperatures and weather conditions. Ability to work in wet, humid areas. Minimum Qualifications: • (3) Three - (5) Five years supervisory experience in a manufacturing environment. • Two-year college degree in business or related field preferred; Four-year college degree a plus. • Experience in a non-union manufacturing environment a plus. • Proficient in MS Office applications such as Excel, Outlook, PowerPoint and Word. • Excellent communication, conflict management, decision-making, motivational and organizational skills required. • Strong self-confidence and leadership skills required. Sponsorship for work authorization is not available for this position. It is the candidate's responsibility to ensure they are legally authorized to work in the location to which they apply. Maker's Pride is an Equal Opportunity Employer.
Production Supervisor-1st Shift
Maker's Pride Carol Stream, Illinois
WE ARE ENCHANCING OUR CAPABILITIES COME JOIN US! JOB SUMMARY The Supervisor is responsible for leading, directing, and developing hourly team members while ensuring the safe, efficient, and compliant execution of daily operations. This role oversees workforce management, production scheduling, employee and food safety, quality standards, adherence to Good Manufacturing Practices (GMPs), and accurate operational documentation. The Supervisor is accountable for achieving safety, quality, service, productivity, and cost objectives by effectively coordinating labor, materials, equipment, and resources. This position ensures products are manufactured safely and to specification while maximizing efficiency, minimizing waste, maintaining regulatory compliance, and fostering a culture of continuous improvement across assigned departments, shifts, or production lines. KEY RESPONSIBILITIES Lead and oversee an assigned department, area, or shift to ensure the safe, efficient, and effective execution of daily operations while achieving production, quality, service, and business objectives. Supervise and develop a workforce of 50+ employees, including direct and indirect reports, through effective communication, coaching, performance management, and accountability. Manage staffing levels, labor utilization, scheduling, and resource allocation to optimize operational efficiency and meet customer and production demands. Maintain a strong floor presence by providing real-time leadership, operational support, coaching, and decision-making to ensure smooth workflow execution. Drive performance in the areas of safety, quality, productivity, cost, delivery, employee engagement, and operational excellence. Monitor key performance indicators (KPIs), labor utilization, production metrics, and operational data to identify trends, resolve issues, and implement corrective actions. Conduct performance management activities, including coaching, counseling, employee relations investigations, corrective actions, performance evaluations, and recognition programs. Support talent development through onboarding, training, cross-training, succession planning, and leadership development initiatives. Execute supervisory responsibilities in accordance with company policies and applicable federal, state, and local regulations, including hiring, interviewing, training, workforce planning, and conflict resolution. Review production schedules, customer requirements, product specifications, and operational priorities to effectively plan and coordinate daily activities. Direct the efficient conversion of raw materials into finished products while minimizing waste, controlling costs, maintaining formula integrity, and ensuring proper inventory rotation. Investigate and resolve operational, maintenance, quality, staffing, payroll, and employee-related issues to maintain productivity and minimize disruptions. Ensure compliance with all food safety, quality, and operational standards, including SQF, GMP, OSHA/MiOSHA requirements, company policies, and standard operating procedures. Promote and sustain a 5S and Continuous Improvement culture through the application of Lean Manufacturing, HPS, and operational excellence principles. Review and approve employee timekeeping, attendance records, and payroll-related transactions while ensuring accuracy and policy compliance. Collaborate with Quality, Maintenance, Supply Chain, Human Resources, Continuous Improvement, and other cross-functional teams to achieve operational goals. Prepare and present operational updates, communicate business priorities, and provide recommendations that support organizational objectives. Ensure compliance with all company safety, environmental, ethical, and business conduct standards. Perform other duties and special projects as assigned. REQUIRED KNOWLEDGE, SKILLS & COMPETENCIES Providing effective leadership, coaching, mentoring, and employee development to build high-performing teams. Managing employee relations matters, conflict resolution, investigations, and performance accountability. Workforce planning, labor optimization, scheduling, and resource allocation to achieve operational objectives. Analyzing data, interpreting KPIs and operational metrics, and utilizing problem-solving techniques to drive business results. Planning, leading, and executing projects, process improvements, and operational initiatives. Driving accountability through performance management, corrective action, and continuous feedback. Strategic thinking, operational planning, budget management, and cost-control initiatives. Communicating effectively through written, verbal, presentation, and interpersonal communication across all levels of the organization. Applying Continuous Improvement, Lean Manufacturing, root cause analysis, and operational excellence methodologies. Building collaborative partnerships and influencing cross-functional teams to achieve shared business objectives. Making sound business decisions in a fast-paced environment while balancing safety, quality, service, productivity, and cost considerations. Leading organizational change and fostering a culture of engagement, accountability, and continuous improvement. MINIMUM QUALIFICATIONS Bachelor's degree preferred; equivalent combination of education and experience may be considered. Three (3) to five (5) years of supervisory experience in a manufacturing environment required. Food, beverage, packaging, or consumer products manufacturing experience preferred. Experience leading a large hourly workforce in a fast-paced operational environment. Proficiency in Microsoft Office applications, including Excel, Outlook, Word, and PowerPoint. Experience with SAP, Kronos, or similar ERP and workforce management systems preferred. Strong leadership, communication, conflict management, decision-making, and organizational skills. Demonstrated ability to drive results through others while building accountability and engagement. Basic mechanical aptitude and troubleshooting skills preferred. PHYSICAL REQUIREMENTS Frequently stand, walk, bend, stoop, twist, reach, and perform repetitive motions throughout the shift. Ability to use hands and fingers for operational and administrative tasks. Ability to see, hear, speak, and distinguish colors. Ability to lift and move up to 50 pounds and push or pull materials with assistance as needed. Ability to work around moving mechanical equipment, airborne particles, vibration, and moderate noise levels requiring hearing protection. Ability to work in varying temperatures, including hot, cold, humid, and wet environments. Ability to work more than 40 hours per week, including weekends, holidays, and extended shifts as business needs require. Ability to perform general housekeeping and sanitation-related tasks. Sponsorship for work authorization is not available for this position. It is the candidate's responsibility to ensure they are legally authorized to work in the location to which they apply. The pay range for this full-time, salaried position is $58,962 - $88,444/year. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. The position is eligible for a discretionary annual incentive based on company and individual performance. We offer a comprehensive benefits package including health, dental, 401k and wellness benefits beginning on the first day of employment. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Maker's Pride is an Equal Opportunity Employer.
11/22/2026
Full time
WE ARE ENCHANCING OUR CAPABILITIES COME JOIN US! JOB SUMMARY The Supervisor is responsible for leading, directing, and developing hourly team members while ensuring the safe, efficient, and compliant execution of daily operations. This role oversees workforce management, production scheduling, employee and food safety, quality standards, adherence to Good Manufacturing Practices (GMPs), and accurate operational documentation. The Supervisor is accountable for achieving safety, quality, service, productivity, and cost objectives by effectively coordinating labor, materials, equipment, and resources. This position ensures products are manufactured safely and to specification while maximizing efficiency, minimizing waste, maintaining regulatory compliance, and fostering a culture of continuous improvement across assigned departments, shifts, or production lines. KEY RESPONSIBILITIES Lead and oversee an assigned department, area, or shift to ensure the safe, efficient, and effective execution of daily operations while achieving production, quality, service, and business objectives. Supervise and develop a workforce of 50+ employees, including direct and indirect reports, through effective communication, coaching, performance management, and accountability. Manage staffing levels, labor utilization, scheduling, and resource allocation to optimize operational efficiency and meet customer and production demands. Maintain a strong floor presence by providing real-time leadership, operational support, coaching, and decision-making to ensure smooth workflow execution. Drive performance in the areas of safety, quality, productivity, cost, delivery, employee engagement, and operational excellence. Monitor key performance indicators (KPIs), labor utilization, production metrics, and operational data to identify trends, resolve issues, and implement corrective actions. Conduct performance management activities, including coaching, counseling, employee relations investigations, corrective actions, performance evaluations, and recognition programs. Support talent development through onboarding, training, cross-training, succession planning, and leadership development initiatives. Execute supervisory responsibilities in accordance with company policies and applicable federal, state, and local regulations, including hiring, interviewing, training, workforce planning, and conflict resolution. Review production schedules, customer requirements, product specifications, and operational priorities to effectively plan and coordinate daily activities. Direct the efficient conversion of raw materials into finished products while minimizing waste, controlling costs, maintaining formula integrity, and ensuring proper inventory rotation. Investigate and resolve operational, maintenance, quality, staffing, payroll, and employee-related issues to maintain productivity and minimize disruptions. Ensure compliance with all food safety, quality, and operational standards, including SQF, GMP, OSHA/MiOSHA requirements, company policies, and standard operating procedures. Promote and sustain a 5S and Continuous Improvement culture through the application of Lean Manufacturing, HPS, and operational excellence principles. Review and approve employee timekeeping, attendance records, and payroll-related transactions while ensuring accuracy and policy compliance. Collaborate with Quality, Maintenance, Supply Chain, Human Resources, Continuous Improvement, and other cross-functional teams to achieve operational goals. Prepare and present operational updates, communicate business priorities, and provide recommendations that support organizational objectives. Ensure compliance with all company safety, environmental, ethical, and business conduct standards. Perform other duties and special projects as assigned. REQUIRED KNOWLEDGE, SKILLS & COMPETENCIES Providing effective leadership, coaching, mentoring, and employee development to build high-performing teams. Managing employee relations matters, conflict resolution, investigations, and performance accountability. Workforce planning, labor optimization, scheduling, and resource allocation to achieve operational objectives. Analyzing data, interpreting KPIs and operational metrics, and utilizing problem-solving techniques to drive business results. Planning, leading, and executing projects, process improvements, and operational initiatives. Driving accountability through performance management, corrective action, and continuous feedback. Strategic thinking, operational planning, budget management, and cost-control initiatives. Communicating effectively through written, verbal, presentation, and interpersonal communication across all levels of the organization. Applying Continuous Improvement, Lean Manufacturing, root cause analysis, and operational excellence methodologies. Building collaborative partnerships and influencing cross-functional teams to achieve shared business objectives. Making sound business decisions in a fast-paced environment while balancing safety, quality, service, productivity, and cost considerations. Leading organizational change and fostering a culture of engagement, accountability, and continuous improvement. MINIMUM QUALIFICATIONS Bachelor's degree preferred; equivalent combination of education and experience may be considered. Three (3) to five (5) years of supervisory experience in a manufacturing environment required. Food, beverage, packaging, or consumer products manufacturing experience preferred. Experience leading a large hourly workforce in a fast-paced operational environment. Proficiency in Microsoft Office applications, including Excel, Outlook, Word, and PowerPoint. Experience with SAP, Kronos, or similar ERP and workforce management systems preferred. Strong leadership, communication, conflict management, decision-making, and organizational skills. Demonstrated ability to drive results through others while building accountability and engagement. Basic mechanical aptitude and troubleshooting skills preferred. PHYSICAL REQUIREMENTS Frequently stand, walk, bend, stoop, twist, reach, and perform repetitive motions throughout the shift. Ability to use hands and fingers for operational and administrative tasks. Ability to see, hear, speak, and distinguish colors. Ability to lift and move up to 50 pounds and push or pull materials with assistance as needed. Ability to work around moving mechanical equipment, airborne particles, vibration, and moderate noise levels requiring hearing protection. Ability to work in varying temperatures, including hot, cold, humid, and wet environments. Ability to work more than 40 hours per week, including weekends, holidays, and extended shifts as business needs require. Ability to perform general housekeeping and sanitation-related tasks. Sponsorship for work authorization is not available for this position. It is the candidate's responsibility to ensure they are legally authorized to work in the location to which they apply. The pay range for this full-time, salaried position is $58,962 - $88,444/year. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. The position is eligible for a discretionary annual incentive based on company and individual performance. We offer a comprehensive benefits package including health, dental, 401k and wellness benefits beginning on the first day of employment. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Maker's Pride is an Equal Opportunity Employer.
Sanitation Technician I- 1st & 2nd Shift
Maker's Pride Geneva, Illinois
Job Summary: The Sanitation Technician follows procedures and SOPs to perform cleaning on production equipment to ensure safety and hygiene. May record information to reflect sanitation activities and issues. Advises/updates supervisor/manager of progress and or other non-routine issues. 1st Shift: Monday thru Friday, 6:00am - 2:30pm 2nd Shift: Monday thru Friday, 2:00pm - 10:30pm + $1.00 shift differential 3rd Shift: Monday thru Friday, 10:00pm - 6:30am + $1.50 shift differential (Must be open to work Weekends) Essential Duties and Responsibilities: Follows established procedures in the cleaning and sanitation of idle production equipment. Wet washes rooms and production lines. Completes required reporting to reflect activity. Advises supervisor when supplies need to be ordered. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on 2nd-shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. The employee may occasionally move up to 45-50 pounds with a hoist, pallet-jack or cart, and regularly lift up to 15 pounds. Employee will be trained and certified to use a scissor lift to perform cleaning tasks at heights of up to 20 feet above the plant floor. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Language Skills: Able to communicate and take direction from the Sanitation Group Lead and/or the Sanitation Supervisor. Education and/or Experience: High school diploma or general education degree (GED) preferred. At least six months experience in a sanitation production environment preferred. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Sponsorship for work authorization is not available for this position. It is the candidate's responsibility to ensure they are legally authorized to work in the location to which they apply. Starting Pay: Sanitation Technician Level I $17.10/hr., Sanitation Technician Level II $18.10/hr., a shift differential is offered for 2nd and 3rd shift opportunities. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. The position is eligible for a discretionary annual incentive based on company and individual performance. We offer a comprehensive benefits package for full-time employees including health, dental, 401k and wellness benefits beginning on the 90 th day of employment. Benefits in just 30 days! Your health and well-being is important to us at Maker's Pride. Full-time employees can access medical, dental, and vision benefits after just 30 days of employment. Plus, our comprehensive benefits package includes a 401(k), wellness benefits, and other programs, subject to applicable eligibility requirements. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Maker's Pride is an Equal Opportunity Employer.
11/22/2026
Full time
Job Summary: The Sanitation Technician follows procedures and SOPs to perform cleaning on production equipment to ensure safety and hygiene. May record information to reflect sanitation activities and issues. Advises/updates supervisor/manager of progress and or other non-routine issues. 1st Shift: Monday thru Friday, 6:00am - 2:30pm 2nd Shift: Monday thru Friday, 2:00pm - 10:30pm + $1.00 shift differential 3rd Shift: Monday thru Friday, 10:00pm - 6:30am + $1.50 shift differential (Must be open to work Weekends) Essential Duties and Responsibilities: Follows established procedures in the cleaning and sanitation of idle production equipment. Wet washes rooms and production lines. Completes required reporting to reflect activity. Advises supervisor when supplies need to be ordered. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be capable of being productive on 2nd-shift scheduling. While performing the duties of this job, the employee is regularly required to stand. The employee is occasionally required to sit, walk, stoop or crouch. In addition, some facilities are multi-level and may require ascending or descending stairs. The employee may occasionally move up to 45-50 pounds with a hoist, pallet-jack or cart, and regularly lift up to 15 pounds. Employee will be trained and certified to use a scissor lift to perform cleaning tasks at heights of up to 20 feet above the plant floor. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Language Skills: Able to communicate and take direction from the Sanitation Group Lead and/or the Sanitation Supervisor. Education and/or Experience: High school diploma or general education degree (GED) preferred. At least six months experience in a sanitation production environment preferred. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Multi-shift production operations may be expansive, noisy, wet/humid and vary in temperature from refrigerated environment, ambient or warm in summer months depending on facility. Sponsorship for work authorization is not available for this position. It is the candidate's responsibility to ensure they are legally authorized to work in the location to which they apply. Starting Pay: Sanitation Technician Level I $17.10/hr., Sanitation Technician Level II $18.10/hr., a shift differential is offered for 2nd and 3rd shift opportunities. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. The position is eligible for a discretionary annual incentive based on company and individual performance. We offer a comprehensive benefits package for full-time employees including health, dental, 401k and wellness benefits beginning on the 90 th day of employment. Benefits in just 30 days! Your health and well-being is important to us at Maker's Pride. Full-time employees can access medical, dental, and vision benefits after just 30 days of employment. Plus, our comprehensive benefits package includes a 401(k), wellness benefits, and other programs, subject to applicable eligibility requirements. This information is provided per the relevant state and local pay transparency laws for the location in which this position will be performed. Base pay information is based on market location. Maker's Pride is an Equal Opportunity Employer.
Assembler
Micro Tech Staffing - Rhode Island / Dartmouth Pawtucket, Rhode Island
Job Description Job Description Assemblers Needed ALL SHIFTS 1st shift 7 AM to 3:00 PM $17.75/hr 2nd shift 3 PM to 11 PM $19.53/hr 3rd shift 11 PM to 7 PM $20.41/hr Overview We are seeking a dedicated and skilled Assemblers to join our dynamic team in a fast-paced manufacturing facility. The ideal candidate will have strong assembly skills working with hand tools. Duties Assemble various medical components according to spec sheets and or verbal instructions. Good hand eye coordination and hand dexterity Must HAVE basic understanding of computers ability to work off a computer when needed Utilize hand tools effectively to complete assembly tasks. Maintain a clean and organized work area to promote safety and efficiency. Conduct visual quality checks on assembled products to ensure they meet company standards. Report any issues or discrepancies in the assembly process to supervisors promptly. MUST SPEAK, READ, WRITE AND ABLE TO COMPREHEND IN ENGLISH training and work is in English both verbally, written and computer. Qualifications Previous experience in a factory or manufacturing environment is preferred. Proficiency in using hand tools and power tools safely and effectively. Experience working on an assembly line is advantageous. Strong attention to detail and commitment to quality workmanship. Ability to work well in a team-oriented environment while also being self-motivated. Flexibility to adapt to changing priorities in a fast-paced setting. Join our team as an Assembler, where your skills will contribute significantly to our production success! Company Description Micro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily. Company Description Micro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily.
11/22/2026
Full time
Job Description Job Description Assemblers Needed ALL SHIFTS 1st shift 7 AM to 3:00 PM $17.75/hr 2nd shift 3 PM to 11 PM $19.53/hr 3rd shift 11 PM to 7 PM $20.41/hr Overview We are seeking a dedicated and skilled Assemblers to join our dynamic team in a fast-paced manufacturing facility. The ideal candidate will have strong assembly skills working with hand tools. Duties Assemble various medical components according to spec sheets and or verbal instructions. Good hand eye coordination and hand dexterity Must HAVE basic understanding of computers ability to work off a computer when needed Utilize hand tools effectively to complete assembly tasks. Maintain a clean and organized work area to promote safety and efficiency. Conduct visual quality checks on assembled products to ensure they meet company standards. Report any issues or discrepancies in the assembly process to supervisors promptly. MUST SPEAK, READ, WRITE AND ABLE TO COMPREHEND IN ENGLISH training and work is in English both verbally, written and computer. Qualifications Previous experience in a factory or manufacturing environment is preferred. Proficiency in using hand tools and power tools safely and effectively. Experience working on an assembly line is advantageous. Strong attention to detail and commitment to quality workmanship. Ability to work well in a team-oriented environment while also being self-motivated. Flexibility to adapt to changing priorities in a fast-paced setting. Join our team as an Assembler, where your skills will contribute significantly to our production success! Company Description Micro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily. Company Description Micro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily.
Assembly Technician - $20/hr
Micro Tech Staffing - Rhode Island / Dartmouth East Providence, Rhode Island
Job Description Job Description Assemblers Needed ALL SHIFTS 1st shift 7 AM to 3:00 PM 2nd shift 3 PM to 11 PM 3rd shift 11 PM to 7 PM Overview We are seeking a dedicated and skilled Assemblers to join our dynamic team in a fast-paced manufacturing facility. The ideal candidate will have strong assembly skills working with hand tools. Duties Assemble various medical components according to spec sheets and or verbal instructions. Good hand eye coordination and hand dexterity Must HAVE basic understanding of computers ability to work off a computer when needed Utilize hand tools effectively to complete assembly tasks. Maintain a clean and organized work area to promote safety and efficiency. Conduct visual quality checks on assembled products to ensure they meet company standards. Report any issues or discrepancies in the assembly process to supervisors promptly. Qualifications Previous experience in a factory or manufacturing environment is preferred. Proficiency in using hand tools and power tools safely and effectively. Experience working on an assembly line is advantageous. Strong attention to detail and commitment to quality workmanship. Ability to work well in a team-oriented environment while also being self-motivated. Flexibility to adapt to changing priorities in a fast-paced setting. Join our team as an Assembler, where your skills will contribute significantly to our production success! Company Description Micro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily. Company Description Micro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily.
11/21/2026
Full time
Job Description Job Description Assemblers Needed ALL SHIFTS 1st shift 7 AM to 3:00 PM 2nd shift 3 PM to 11 PM 3rd shift 11 PM to 7 PM Overview We are seeking a dedicated and skilled Assemblers to join our dynamic team in a fast-paced manufacturing facility. The ideal candidate will have strong assembly skills working with hand tools. Duties Assemble various medical components according to spec sheets and or verbal instructions. Good hand eye coordination and hand dexterity Must HAVE basic understanding of computers ability to work off a computer when needed Utilize hand tools effectively to complete assembly tasks. Maintain a clean and organized work area to promote safety and efficiency. Conduct visual quality checks on assembled products to ensure they meet company standards. Report any issues or discrepancies in the assembly process to supervisors promptly. Qualifications Previous experience in a factory or manufacturing environment is preferred. Proficiency in using hand tools and power tools safely and effectively. Experience working on an assembly line is advantageous. Strong attention to detail and commitment to quality workmanship. Ability to work well in a team-oriented environment while also being self-motivated. Flexibility to adapt to changing priorities in a fast-paced setting. Join our team as an Assembler, where your skills will contribute significantly to our production success! Company Description Micro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily. Company Description Micro Tech Staffing Group is one of the top technical staffing firms on the Eastern Seaboard. Since 1985 we have taken great pride in providing quality staffing services to businesses in the fields of Information Technology, Engineering, Manufacturing, Life Sciences, and Finance & Administration. With offices in Massachusetts, New Hampshire, Rhode Island, Connecticut, Maine, Virginia, North Carolina and Georgia, Micro Tech places an average of 2,000 highly-skilled employees daily.
Advanced Molding Technologies, LLC
Process Technician II
Advanced Molding Technologies, LLC Circle Pines, Minnesota
Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Schedule: 1st Shift (Monday-Friday 6:00am to 2:30pm) Compensation: The hourly pay range for this position is $28.00 to $37.00. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: Process Technician II performs setup, startup, and troubleshooting activities for injection molding operations. This role supports continuous production, ensuring processes remain within validated parameters, and collaborates with Quality, Engineering, and Maintenance to resolve technical and quality-related issues. The Process Technician II also assists in mentoring Level I technicians, contributes to process optimization, and ensures compliance with ISO 13485, ISO 9001, cGMP, and internal QMS standards. Essential Duties and Responsibilities: Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Perform in-process troubleshooting to resolve molding, machine, and auxiliary equipment issues promptly and effectively. Perform setups independently as required to support production schedules or coverage needs, including both routine and moderately complex setups, depending on production needs. Assist Process Technician I employees during setups as needed by providing hands-on guidance, troubleshooting support, and verification to ensure proper procedures are followed. Collaborate with Engineering and Quality to address process or product issues and implement corrective actions. Execute proper shutdowns including purging, material changes, and documentation handoff. Perform and document work-cell verifications to confirm readiness, cleanliness, and compliance with production standards. Maintain accurate GDP-compliant process logs, maintenance requests, and PQ (Process Qualification) feedback. Ensure all process changes and documentation updates comply with ISO 13485, ISO 9001, and cGMP standards. Support QMS initiatives such as nonconformance reporting, change control, and participation in corrective- and preventive-action (CAPA) activities. Initiate and track to closure Tooling Work Orders (TWOs) as needed to support mold maintenance, tooling repair, and process optimization. Provide feedback on tooling, process, and equipment improvements that enhance quality, safety, and efficiency. Assist in mentoring and training Process Technician I employees in setup, troubleshooting, and documentation practices. Support validation, engineering trials, and new-tooling qualifications when assigned. Participate in small-scale continuous-improvement projects within the production area. Other duties as assigned. Knowledge, Skills, and Abilities: Strong working knowledge of injection-molding equipment, auxiliary systems, and process-control instrumentation. Understanding of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficient in root-cause troubleshooting, process adjustments, and corrective-action implementation. Familiarity with scientific-molding principles and basic data-driven problem-solving. Ability to interpret process documentation, setup sheets, and work instructions. Effective communication and collaboration with Engineering, Quality, Maintenance, and Production teams. Demonstrated leadership and mentoring abilities. Strong organizational skills with attention to documentation accuracy and process discipline. Commitment to safety, product quality, and regulatory compliance. Education and Experience Requirements: High-school diploma or equivalent required; technical certificate or degree in plastics, engineering technology, or related field preferred. 3+ years of recent injection-molding setup and processing experience required; medical-device or other regulated manufacturing experience strongly preferred. Additional training or certifications through AIM/Beaumont, RJG or Paulson are preferred and may be offered through employment Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Ability to work in hot, noisy, or confined areas during machine setup or maintenance activities. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 28-37 Hourly Wage PIeb42d2774b3e-2738
11/21/2026
Full time
Department: Processing Reports To: Process Technician Supervisor FLSA Status: Non-Exempt Schedule: 1st Shift (Monday-Friday 6:00am to 2:30pm) Compensation: The hourly pay range for this position is $28.00 to $37.00. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: Process Technician II performs setup, startup, and troubleshooting activities for injection molding operations. This role supports continuous production, ensuring processes remain within validated parameters, and collaborates with Quality, Engineering, and Maintenance to resolve technical and quality-related issues. The Process Technician II also assists in mentoring Level I technicians, contributes to process optimization, and ensures compliance with ISO 13485, ISO 9001, cGMP, and internal QMS standards. Essential Duties and Responsibilities: Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production. Perform in-process troubleshooting to resolve molding, machine, and auxiliary equipment issues promptly and effectively. Perform setups independently as required to support production schedules or coverage needs, including both routine and moderately complex setups, depending on production needs. Assist Process Technician I employees during setups as needed by providing hands-on guidance, troubleshooting support, and verification to ensure proper procedures are followed. Collaborate with Engineering and Quality to address process or product issues and implement corrective actions. Execute proper shutdowns including purging, material changes, and documentation handoff. Perform and document work-cell verifications to confirm readiness, cleanliness, and compliance with production standards. Maintain accurate GDP-compliant process logs, maintenance requests, and PQ (Process Qualification) feedback. Ensure all process changes and documentation updates comply with ISO 13485, ISO 9001, and cGMP standards. Support QMS initiatives such as nonconformance reporting, change control, and participation in corrective- and preventive-action (CAPA) activities. Initiate and track to closure Tooling Work Orders (TWOs) as needed to support mold maintenance, tooling repair, and process optimization. Provide feedback on tooling, process, and equipment improvements that enhance quality, safety, and efficiency. Assist in mentoring and training Process Technician I employees in setup, troubleshooting, and documentation practices. Support validation, engineering trials, and new-tooling qualifications when assigned. Participate in small-scale continuous-improvement projects within the production area. Other duties as assigned. Knowledge, Skills, and Abilities: Strong working knowledge of injection-molding equipment, auxiliary systems, and process-control instrumentation. Understanding of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements. Proficient in root-cause troubleshooting, process adjustments, and corrective-action implementation. Familiarity with scientific-molding principles and basic data-driven problem-solving. Ability to interpret process documentation, setup sheets, and work instructions. Effective communication and collaboration with Engineering, Quality, Maintenance, and Production teams. Demonstrated leadership and mentoring abilities. Strong organizational skills with attention to documentation accuracy and process discipline. Commitment to safety, product quality, and regulatory compliance. Education and Experience Requirements: High-school diploma or equivalent required; technical certificate or degree in plastics, engineering technology, or related field preferred. 3+ years of recent injection-molding setup and processing experience required; medical-device or other regulated manufacturing experience strongly preferred. Additional training or certifications through AIM/Beaumont, RJG or Paulson are preferred and may be offered through employment Physical Requirements: Ability to stand and walk for extended periods throughout the shift (up to 12 hours). Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently. Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices. Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite). Requires manual dexterity for working with small parts, tools, and precision instruments. Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures. Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays. Ability to work in hot, noisy, or confined areas during machine setup or maintenance activities. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 28-37 Hourly Wage PIeb42d2774b3e-2738
Fair Oaks Foods, LLC
General Utility - 1st Shift
Fair Oaks Foods, LLC Pleasant Prairie, Wisconsin
General Utility - 1st Shift General Utility Level 1 Position Summary The position General Utility is the entry level production role. It is not bound by one specific role within the production area, but rather a description of a number of duties with in this job classification. The is a general labor role. Responsibilities All employees are required to contribute to production operations by complying with policies and procedures for meat processing; Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) regulations, etc. All employees are required to contribute to a safe and sanitary work environment by complying with established procedures and rules. General Utility - Sanitation/ Pack-Off (Tan frock) Must maintain all pack-out production areas in clean and sanitary conditions. Communicate any issues that are leading to unsanitary conditions in a timely manner to Supervisor and/or Foreman Track and record all inedible/empty, weigh all yellow inedible totes or barrels, and empty all trash containers. Properly dispose and label all inedible collected (Spraying denaturant on the inedible product) Break down all empty combos Remove all old printing and labels from the combo before reusing. (Company & USDA) All trash, cardboard, and plastic liners must be put in proper containers. Ensure the area is staged with inedible containers at start-up and/or ensure all end-of-night dry pick-up duties are performed accurately and in a timely manner. Assist in accurately training new hires in performing Sanitation/Tan Frock duties Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Attend to the current needs of the process by responding immediately to the expressed instructions of the Production Supervisor and/or Production Foreman General Utility - Packer Assist with Preparing / Disassembling packaging equipment for the operation, of meat-processing or for sanitation. Place each bag in the correct box, visually inspecting each bag to ensure a proper seal. Place any defects in a properly labeled rework container Assist with the collection, opening, and reuse of rework ensuring proper identification of product and line to eliminate cross-contamination and allergen concerns Assist in relieving co-workers for breaks, which may mean assisting in another position Must maintain the production area clean and in a sanitary condition. Accurately complete any assigned paperwork Assisting in accurately training new employees for Packer duties Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Attend to current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman General Utility - Palletizer Will coordinate with Foreman/ Supervisor/ Ilapak operator, and Shipping and utilize proper Product specification sheet to identify the product that is scheduled to verify and ensure pallets are being stacked correctly, (case per row, how many rows, and pallet configuration) Visually inspect cases to ensure cases are labeled and have a clear legible code date. Make required adjustments to machinery to facilitate smooth production including but not limited to changing tape, changing code dates, and communicating any all issues in a timely manner Operate a manual hand jack as needed (operate a power jack but training is required in the operation of power jacks) Facilitating and assisting in the reworking product into production in a timely manner including but not limited to; opening bags and boxes, and reworking combos Will assemble, disassemble, and change over equipment including but not limited to; film, tubes, etc., and ensure the machine is protected from the sanitation process Will communicate all equipment malfunctions in a timely manner Must maintain production area clean and in sanitary condition Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Assist with Preparing / Disassembling processing equipment for the operation, of meat-processing or for sanitation. Attend to the current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman General Utility - Box Maker Will coordinate with Foreman/ Supervisor/ Initial operator, and Shipping to identify the product that is scheduled to verify, and stage needed supplies are present for scheduled production runs Ensure that boxes, labels, and all other supplies needed for the production run and any changeover are present are staged to facilitate smooth production, communicating any issues or shortages with the supervisor and or foreman Ensure label and box match the Specification sheet, and boxes are clear of damage prior to sending to the line (including product label and/or export label) Make required adjustments to machinery to facilitate smooth production communicating any issue with the foreman and or supervisor Communicate with Foreman and or Supervisor to gain an understanding of when boxes need to be changed over and have box change completed and ready for the next production run Communicating and assisting in the transport of frozen rework to the Processing/Grinding location and ensuring the combo is accurately and clearly labeled to prevent cross-contamination or allergen concerns Will communicate all equipment malfunctions in timely manner Must maintain production/ box room area clean and in sanitary condition All assigned paperwork Will assist with normal start up or end of night duties including but not limited to: dry pick up, Tan frock duties, breaking down boxes, back staging packing materials and /or product, cleaning, covering, and/or wrapping equipment to protect from sanitation process Assist with Preparing / Disassemble processing equipment for operation, of meat- processing or for sanitation. Attend to current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman Perform other duties as assigned. Qualifications High School diploma or General Educational Development (GED) equivalent in training or experience. The ability to read, write and speak English. Must be dependable and detail-oriented. Must be able to follow directions and work under minimal supervision. Communicate effectively and clearly in a timely manner. Must be willing to work weekends and overtime hours as the company necessitates. Ability to communicate clearly, both verbally and in writing. Ability to multi-task in a fast-paced environment safely. Physical Demands and Work Environment: This job operates in a manufacturing environment. The characteristics described here are representative of those an employee encounter while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and high, precarious places. The employee is frequently exposed to colder (30 degrees) and/or warmer temperature areas. The noise level in the work environment is usually high. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands and fingers, to handle, or feel; reach with hands and arms; climb or balance, stoop, kneel, crouch, or crawl, talk or hear as defined below. Standard of 10 hours shifts and longer as the company requires Standing and/or walking constantly throughout the shift Lifting /Carrying a minimum of 50 lbs. Use both hands as necessary The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Fair Oaks Foods assures equal employment opportunity in all its hiring and employment policies and practices, which include all aspects of employment, such as recruiting, hiring, promotions, transfers, demotions, layoffs or terminations, compensation, benefits, training, company-sponsored education, social and recreational programs or events, and all other terms, conditions, and privileges of employment. These policies and practices are administered without regard to "legally protected categories" such as: race, color, religion, national origin, age, gender, disability, marital status, veteran status, sexual orientation or sexual orientation, pregnancy status or medical conditions related to childbirth, and/or any other factor protected by law. . click apply for full job details
11/21/2026
Full time
General Utility - 1st Shift General Utility Level 1 Position Summary The position General Utility is the entry level production role. It is not bound by one specific role within the production area, but rather a description of a number of duties with in this job classification. The is a general labor role. Responsibilities All employees are required to contribute to production operations by complying with policies and procedures for meat processing; Good Manufacturing Practices (GMPs), Hazard Analysis and Critical Control Point (HACCP) regulations, etc. All employees are required to contribute to a safe and sanitary work environment by complying with established procedures and rules. General Utility - Sanitation/ Pack-Off (Tan frock) Must maintain all pack-out production areas in clean and sanitary conditions. Communicate any issues that are leading to unsanitary conditions in a timely manner to Supervisor and/or Foreman Track and record all inedible/empty, weigh all yellow inedible totes or barrels, and empty all trash containers. Properly dispose and label all inedible collected (Spraying denaturant on the inedible product) Break down all empty combos Remove all old printing and labels from the combo before reusing. (Company & USDA) All trash, cardboard, and plastic liners must be put in proper containers. Ensure the area is staged with inedible containers at start-up and/or ensure all end-of-night dry pick-up duties are performed accurately and in a timely manner. Assist in accurately training new hires in performing Sanitation/Tan Frock duties Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Attend to the current needs of the process by responding immediately to the expressed instructions of the Production Supervisor and/or Production Foreman General Utility - Packer Assist with Preparing / Disassembling packaging equipment for the operation, of meat-processing or for sanitation. Place each bag in the correct box, visually inspecting each bag to ensure a proper seal. Place any defects in a properly labeled rework container Assist with the collection, opening, and reuse of rework ensuring proper identification of product and line to eliminate cross-contamination and allergen concerns Assist in relieving co-workers for breaks, which may mean assisting in another position Must maintain the production area clean and in a sanitary condition. Accurately complete any assigned paperwork Assisting in accurately training new employees for Packer duties Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Attend to current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman General Utility - Palletizer Will coordinate with Foreman/ Supervisor/ Ilapak operator, and Shipping and utilize proper Product specification sheet to identify the product that is scheduled to verify and ensure pallets are being stacked correctly, (case per row, how many rows, and pallet configuration) Visually inspect cases to ensure cases are labeled and have a clear legible code date. Make required adjustments to machinery to facilitate smooth production including but not limited to changing tape, changing code dates, and communicating any all issues in a timely manner Operate a manual hand jack as needed (operate a power jack but training is required in the operation of power jacks) Facilitating and assisting in the reworking product into production in a timely manner including but not limited to; opening bags and boxes, and reworking combos Will assemble, disassemble, and change over equipment including but not limited to; film, tubes, etc., and ensure the machine is protected from the sanitation process Will communicate all equipment malfunctions in a timely manner Must maintain production area clean and in sanitary condition Prior to leaving at the end of production, check in with the area Foreman and or Supervisor for additional shutdown activities that need to be performed Assist with Preparing / Disassembling processing equipment for the operation, of meat-processing or for sanitation. Attend to the current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman General Utility - Box Maker Will coordinate with Foreman/ Supervisor/ Initial operator, and Shipping to identify the product that is scheduled to verify, and stage needed supplies are present for scheduled production runs Ensure that boxes, labels, and all other supplies needed for the production run and any changeover are present are staged to facilitate smooth production, communicating any issues or shortages with the supervisor and or foreman Ensure label and box match the Specification sheet, and boxes are clear of damage prior to sending to the line (including product label and/or export label) Make required adjustments to machinery to facilitate smooth production communicating any issue with the foreman and or supervisor Communicate with Foreman and or Supervisor to gain an understanding of when boxes need to be changed over and have box change completed and ready for the next production run Communicating and assisting in the transport of frozen rework to the Processing/Grinding location and ensuring the combo is accurately and clearly labeled to prevent cross-contamination or allergen concerns Will communicate all equipment malfunctions in timely manner Must maintain production/ box room area clean and in sanitary condition All assigned paperwork Will assist with normal start up or end of night duties including but not limited to: dry pick up, Tan frock duties, breaking down boxes, back staging packing materials and /or product, cleaning, covering, and/or wrapping equipment to protect from sanitation process Assist with Preparing / Disassemble processing equipment for operation, of meat- processing or for sanitation. Attend to current needs of the process by responding immediately to the expressed instruction of the Production Supervisor and/or Production Foreman Perform other duties as assigned. Qualifications High School diploma or General Educational Development (GED) equivalent in training or experience. The ability to read, write and speak English. Must be dependable and detail-oriented. Must be able to follow directions and work under minimal supervision. Communicate effectively and clearly in a timely manner. Must be willing to work weekends and overtime hours as the company necessitates. Ability to communicate clearly, both verbally and in writing. Ability to multi-task in a fast-paced environment safely. Physical Demands and Work Environment: This job operates in a manufacturing environment. The characteristics described here are representative of those an employee encounter while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and high, precarious places. The employee is frequently exposed to colder (30 degrees) and/or warmer temperature areas. The noise level in the work environment is usually high. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands and fingers, to handle, or feel; reach with hands and arms; climb or balance, stoop, kneel, crouch, or crawl, talk or hear as defined below. Standard of 10 hours shifts and longer as the company requires Standing and/or walking constantly throughout the shift Lifting /Carrying a minimum of 50 lbs. Use both hands as necessary The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Fair Oaks Foods assures equal employment opportunity in all its hiring and employment policies and practices, which include all aspects of employment, such as recruiting, hiring, promotions, transfers, demotions, layoffs or terminations, compensation, benefits, training, company-sponsored education, social and recreational programs or events, and all other terms, conditions, and privileges of employment. These policies and practices are administered without regard to "legally protected categories" such as: race, color, religion, national origin, age, gender, disability, marital status, veteran status, sexual orientation or sexual orientation, pregnancy status or medical conditions related to childbirth, and/or any other factor protected by law. . click apply for full job details
Production Supervisor - Night Shift (4 Days 10 Hours)
US Tsubaki Automotive, LLC Chicopee, Massachusetts
Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Production Supervisor directs and coordinates union personnel within the various departments involving the various stages of manufacturing and assembly of automotive parts, specifically timing chain system components. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Production Supervisors are responsible for directing, coordinating, training, coaching, and supervising the daily activities of assigned employees that are directly and/or indirectly engaged in the production process of assigned products/departments/processes in a manner that ensures all safety, quality, delivery, productivity, and labor utilization goals are achieved. Provide clear expectations, coaching and direction to employees. Create and monitor daily efficient flow of material through the department by utilization of manpower and equipment in the department. Determine and implement continuous improvement plans for the equipment, and overall department. Monitor yearly budget for the department ensure goals are met by reducing cost related to production and MRO supplies. Foster working relationships with associated departments i.e. EHS, Planning, Engineering and Quality. Establish and maintain effective communication vehicles such as toolbox meetings and employee meetings. Understands, communicates, and follows all company policies, work rules, and Union Contract. Effectively utilizes this knowledge to: Analyze and resolve work problems, or assists workers in solving work problems. Correctly maintains time and attendance records. Confers with Group Leader(s) and employees to coordinate activities of individual departments. Ensure department inventory is accurate. Partner with Human Resources and management when addressing grievance and disciplinary matters to ensure fair and consistent treatment of all employees. Make daily decisions on production schedules and personnel related matters that affect the delivery and quality. It is the expectation of the company that Supervisors will accomplish these goals by working to a high ethical standard and consistently complies with all company policies, work rules, Union Contractual agreements, and applicable laws with little to no direct supervision. Requirements: Bachelor's Degree preferred but not required 3 to 7 years of supervisory experience or production leadership Ability to effectively present information and respond to questions from employees at all levels of the organization. Ability to communicate with all employees and deal with difficult situations as they arise, while effectively adhering to company policy and procedure. Ability to write reports, business correspondence, and work instructions. Intermediate knowledge of Excel, Word required Demonstrable knowledge and experience in Lean Manufacturing, Project Management and ISO procedures is required Proficiency in Microsoft Office and familiarity with ERP Systems. Strong knowledge of EHS standards, Quality Control and Production processes. Excellent leadership, communication and problem-solving skills. Ability to work in a fast-paced environment and manage multiple priorities. Must be able to work 1st, 2nd or 3rd Shift, depending on the current operational needs. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 11 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer-Minorities/Females/Veterans/Disability PM21 Compensation details: 0 Yearly Salary PI30f2adc525ad-8894
11/20/2026
Full time
Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Production Supervisor directs and coordinates union personnel within the various departments involving the various stages of manufacturing and assembly of automotive parts, specifically timing chain system components. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Production Supervisors are responsible for directing, coordinating, training, coaching, and supervising the daily activities of assigned employees that are directly and/or indirectly engaged in the production process of assigned products/departments/processes in a manner that ensures all safety, quality, delivery, productivity, and labor utilization goals are achieved. Provide clear expectations, coaching and direction to employees. Create and monitor daily efficient flow of material through the department by utilization of manpower and equipment in the department. Determine and implement continuous improvement plans for the equipment, and overall department. Monitor yearly budget for the department ensure goals are met by reducing cost related to production and MRO supplies. Foster working relationships with associated departments i.e. EHS, Planning, Engineering and Quality. Establish and maintain effective communication vehicles such as toolbox meetings and employee meetings. Understands, communicates, and follows all company policies, work rules, and Union Contract. Effectively utilizes this knowledge to: Analyze and resolve work problems, or assists workers in solving work problems. Correctly maintains time and attendance records. Confers with Group Leader(s) and employees to coordinate activities of individual departments. Ensure department inventory is accurate. Partner with Human Resources and management when addressing grievance and disciplinary matters to ensure fair and consistent treatment of all employees. Make daily decisions on production schedules and personnel related matters that affect the delivery and quality. It is the expectation of the company that Supervisors will accomplish these goals by working to a high ethical standard and consistently complies with all company policies, work rules, Union Contractual agreements, and applicable laws with little to no direct supervision. Requirements: Bachelor's Degree preferred but not required 3 to 7 years of supervisory experience or production leadership Ability to effectively present information and respond to questions from employees at all levels of the organization. Ability to communicate with all employees and deal with difficult situations as they arise, while effectively adhering to company policy and procedure. Ability to write reports, business correspondence, and work instructions. Intermediate knowledge of Excel, Word required Demonstrable knowledge and experience in Lean Manufacturing, Project Management and ISO procedures is required Proficiency in Microsoft Office and familiarity with ERP Systems. Strong knowledge of EHS standards, Quality Control and Production processes. Excellent leadership, communication and problem-solving skills. Ability to work in a fast-paced environment and manage multiple priorities. Must be able to work 1st, 2nd or 3rd Shift, depending on the current operational needs. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 11 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer-Minorities/Females/Veterans/Disability PM21 Compensation details: 0 Yearly Salary PI30f2adc525ad-8894
Graceland Fruit, Inc.
Maintenance Mechanic
Graceland Fruit, Inc. Frankfort, Michigan
Maintenance Mechanic GRACELAND FRUIT - all jobs are in Frankfort, MI 49635 JOB TITLE: Maintenance Mechanic Job Type: Full Time, Hourly with OT pay (Non-Exempt) WAGE RANGE: $19.00 - 21.00 per hour (plus $2/hr. Night Shift Premium, if applicable) ($45,600 to $50,400 annually) Both shifts available (Days and Nights) DEPARTMENT: Maintenance REPORTS TO: Maintenance Supervisor Work Schedule: Day Shift hours: 7 AM to 7 PM Night Shift hours: 7 PM to 7 AM Both shifts work 2-3 days on, 2-3 days off and repeats every two weeks; therefore, we have 2 shifts for days and 2 shifts for nights that are working 12-hours each shift. Have the ability to work flexible workdays and work hours depending on demands of the company or process, work holidays and weekends on a rotating shift schedule. About Graceland Fruit: We produce premium quality dried fruit ingredients used by innovative food manufacturers and providers around the world to create delicious, on-trend customer products. Job summary: This position entails general maintenance, troubleshooting, repair, and fabrication work in areas, including: production, electrical systems, plumbing, forklift repair, plant heating, refrigeration and buildings maintenance. Job Requirements: High School diploma or equivalent. Proficient in basic math, reading, and writing skills. Proficient in the use of common hand tools and hand-held power tools, and their safe operation while following OSHA and company safety guidelines. Ability to safely operate, repair, and maintain machinery. Basic knowledge of 480v, 230v, and 120v electrical components. Basic welding and fabrication skills; good mechanical aptitude and common sense. Excellent communications skills, both verbal and written. Ability to work cooperatively as a team member. Adequate computer skills for handling work orders, e-mail, etc. Ability to work 20 ft. off the ground from a ladder, forklift cage, or lift platform. Ability to work in confined spaces (with appropriate safety equipment). Ability to carry 50 lbs. for 50 ft; carry, set up and climb a 30' extension ladder. 20-20 vision (may use corrective lenses), ability to see all primary colors. Job Duties: Essential Functions - Troubleshoot, repair, and maintain production equipment Fabricate new equipment as needed Perform PM's on specified equipment as assigned Repair and maintain steam boiler and associated equipment Perform building repairs and maintenance as needed Generate, update, and close out work orders as required Troubleshoot, repair, and maintain forklifts, batteries, and related equipment Additional responsibilities Keep shop and work areas neat and clean Follow all OSHA and company safety policies and rules Other duties as assigned Benefits - Available on the 1st day of the month, following 60 days of employment Medical, Dental, and Vision Insurance 401(k) with Company Match, 100% match up to 6% of Annual Wage - new hires are auto enrolled at 3% Supplemental Insurance Options (Critical Illness & Accident Insurance) Health Care Flexible Spending Accounts & Health Savings Account (company match on HSA) Life / Accidental Death Insurance Legal Assistance Plan Identity Theft Protection Paid Benefits: Short-Term Disability / Long-Term Disability / Basic Life & AD&D Insurances Bereavement Leave Paid Lunch Period, Safety Lunch Program Innovative Pay-for-Skill Program - Pay-for-Skill increase after six months PTO - accrue hours first year, max of 84 hours, additional hours based on seniority (employees eligible after 90 days of continuous employment) 9 Paid Holidays per Year (employees eligible after 45 days of continuous employment) Educational Assistance Program Incentive Program - Providing up to $500 in annual incentive pay Perfect Attendance Incentive ($100 or PTO hours) Sign-on Bonus at completion max $1,000 Referral Bonus Program (opportunity to earn up to $2,700) Compensation details: 19-21 Hourly Wage PI571c3ba8d91b-6534
11/20/2026
Full time
Maintenance Mechanic GRACELAND FRUIT - all jobs are in Frankfort, MI 49635 JOB TITLE: Maintenance Mechanic Job Type: Full Time, Hourly with OT pay (Non-Exempt) WAGE RANGE: $19.00 - 21.00 per hour (plus $2/hr. Night Shift Premium, if applicable) ($45,600 to $50,400 annually) Both shifts available (Days and Nights) DEPARTMENT: Maintenance REPORTS TO: Maintenance Supervisor Work Schedule: Day Shift hours: 7 AM to 7 PM Night Shift hours: 7 PM to 7 AM Both shifts work 2-3 days on, 2-3 days off and repeats every two weeks; therefore, we have 2 shifts for days and 2 shifts for nights that are working 12-hours each shift. Have the ability to work flexible workdays and work hours depending on demands of the company or process, work holidays and weekends on a rotating shift schedule. About Graceland Fruit: We produce premium quality dried fruit ingredients used by innovative food manufacturers and providers around the world to create delicious, on-trend customer products. Job summary: This position entails general maintenance, troubleshooting, repair, and fabrication work in areas, including: production, electrical systems, plumbing, forklift repair, plant heating, refrigeration and buildings maintenance. Job Requirements: High School diploma or equivalent. Proficient in basic math, reading, and writing skills. Proficient in the use of common hand tools and hand-held power tools, and their safe operation while following OSHA and company safety guidelines. Ability to safely operate, repair, and maintain machinery. Basic knowledge of 480v, 230v, and 120v electrical components. Basic welding and fabrication skills; good mechanical aptitude and common sense. Excellent communications skills, both verbal and written. Ability to work cooperatively as a team member. Adequate computer skills for handling work orders, e-mail, etc. Ability to work 20 ft. off the ground from a ladder, forklift cage, or lift platform. Ability to work in confined spaces (with appropriate safety equipment). Ability to carry 50 lbs. for 50 ft; carry, set up and climb a 30' extension ladder. 20-20 vision (may use corrective lenses), ability to see all primary colors. Job Duties: Essential Functions - Troubleshoot, repair, and maintain production equipment Fabricate new equipment as needed Perform PM's on specified equipment as assigned Repair and maintain steam boiler and associated equipment Perform building repairs and maintenance as needed Generate, update, and close out work orders as required Troubleshoot, repair, and maintain forklifts, batteries, and related equipment Additional responsibilities Keep shop and work areas neat and clean Follow all OSHA and company safety policies and rules Other duties as assigned Benefits - Available on the 1st day of the month, following 60 days of employment Medical, Dental, and Vision Insurance 401(k) with Company Match, 100% match up to 6% of Annual Wage - new hires are auto enrolled at 3% Supplemental Insurance Options (Critical Illness & Accident Insurance) Health Care Flexible Spending Accounts & Health Savings Account (company match on HSA) Life / Accidental Death Insurance Legal Assistance Plan Identity Theft Protection Paid Benefits: Short-Term Disability / Long-Term Disability / Basic Life & AD&D Insurances Bereavement Leave Paid Lunch Period, Safety Lunch Program Innovative Pay-for-Skill Program - Pay-for-Skill increase after six months PTO - accrue hours first year, max of 84 hours, additional hours based on seniority (employees eligible after 90 days of continuous employment) 9 Paid Holidays per Year (employees eligible after 45 days of continuous employment) Educational Assistance Program Incentive Program - Providing up to $500 in annual incentive pay Perfect Attendance Incentive ($100 or PTO hours) Sign-on Bonus at completion max $1,000 Referral Bonus Program (opportunity to earn up to $2,700) Compensation details: 19-21 Hourly Wage PI571c3ba8d91b-6534
Assembler, General (TN) - 1st Shift
US Tsubaki Automotive, LLC Portland, Tennessee
Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Assembler, who works under the direction of the Production Supervisor is responsible for producing parts by assembling parts and subassemblies by hand or with simple machinery. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Follow work instructions and/or route sheets, assemble and/or pack products for various departments. Inspect machine at beginning of shift and notates on check sheet. Clean and/or lubricate machinery as required. Inspect and place parts in designated trays. Meet specified quantity and quality guidelines. Maintain equipment in a clean and orderly condition. Reports faulty operation or defective material to supervisor Conducts visual quality inspections Ability to place product in container while on different types of work surfaces, such as slick or slippery, and on different levels. Monitor machines Ability to work in a fast-paced environment. Ability to work in different environments such as a slick work surface, climbing steps to retrieve product in a machine. Ability to work with heavy machinery (Milling Machines, Injection Molding, Etc.) Ability to work in dimly lit areas. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered. One to three months related experience and/or training. Manual dexterity and ability to use various machines. Attention to detail. Ability to read a limited number of two-and three syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using weight measurement. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Basic computer skills. Basic problem solving or troubleshooting skills. Ability to work with a team. Physical Activity/Mode: Climbing, balancing, stooping, kneeling, crouching, crawling, walking, standing, lifting, reaching, pulling, fingering, grasping, talking, hearing. Heavy work: exerting up to 100 pounds of force frequently and/or up to 20 pounds of force constantly to move objects. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI92835d1f5-
11/20/2026
Full time
Description: The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Assembler, who works under the direction of the Production Supervisor is responsible for producing parts by assembling parts and subassemblies by hand or with simple machinery. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Follow work instructions and/or route sheets, assemble and/or pack products for various departments. Inspect machine at beginning of shift and notates on check sheet. Clean and/or lubricate machinery as required. Inspect and place parts in designated trays. Meet specified quantity and quality guidelines. Maintain equipment in a clean and orderly condition. Reports faulty operation or defective material to supervisor Conducts visual quality inspections Ability to place product in container while on different types of work surfaces, such as slick or slippery, and on different levels. Monitor machines Ability to work in a fast-paced environment. Ability to work in different environments such as a slick work surface, climbing steps to retrieve product in a machine. Ability to work with heavy machinery (Milling Machines, Injection Molding, Etc.) Ability to work in dimly lit areas. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered. One to three months related experience and/or training. Manual dexterity and ability to use various machines. Attention to detail. Ability to read a limited number of two-and three syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using weight measurement. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Basic computer skills. Basic problem solving or troubleshooting skills. Ability to work with a team. Physical Activity/Mode: Climbing, balancing, stooping, kneeling, crouching, crawling, walking, standing, lifting, reaching, pulling, fingering, grasping, talking, hearing. Heavy work: exerting up to 100 pounds of force frequently and/or up to 20 pounds of force constantly to move objects. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. Learn more about U.S. Tsubaki at: U.S. Tsubaki offers a competitive compensation and benefits package, including health benefits effective on date of hire, dental and vision benefits effective on the first of the month following date of hire, Paid Time Off ("PTO"), 10 paid holidays, generous 401(k) match and profit sharing, annual bonus potential, life insurance, short and long-term disability, flexible spending accounts, commuter benefits, education reimbursement, home and auto insurance discounts, and pet insurance. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI92835d1f5-
Machine Operator
Atkins & Pearce Inc Ft Mitchell, Kentucky
PERMANENT SCHEDULE IS 2ND SHIFT (3:25pm - 11:55pm) - or - 3RD SHIFT ( 10:35pm-7:05am ). Training is usually on 1st shift (7am-3:30pm), Monday-Friday for 18 weeks. About the Job For more than 200 years, Atkins & Pearce has turned fiber into products that show up everywhere - from aerospace and medical devices to the wick in the candle on your table. We're a 7th-generation, family-owned manufacturer right here in Covington, KY, and our team is growing. Right now, we're looking for dependable Braider Machine Operators to join our 2nd and 3rd shift teams. What You'll Do As a Braider Machine Operator, you'll run a variety of braiding machines and help send quality product out the door. Day to day, you'll: Operate various winders, moving from station to station as neededRun coating machinesPrep and pack finished product for shipmentCheck your work against material specifications so every order meets our quality standards You'll be part of a team that values clear communication and coordination - we use a simple "5+1" communication approach to keep everyone on the same page - while still being trusted to work independently and safely within a production standard. What You Bring A high school diploma or GEDAttention to detail and pride in accurate, quality workA safety-first mindset and a willingness to learn That's it - the rest, we'll teach you. Your Schedule & Work Environment Full-time, 40 hours per week on 2nd shift or 3rd shift (possibly one weekend day on your permanent schedule)Work takes place in our manufacturing facility, where hearing protection is requiredAll appropriate PPE is provided, including a hat or hairnet and hearing protectionThe use of a pair of scissors is required to perform this job This is hands-on, active work. Over the course of a shift, you can expect to: Stand and walk on concrete for the full shiftLift up to 50 lbs. occasionallyWork with your hands and arms above shoulder heightBend or squat occasionallyPerform repetitive motions with your hands and wrists Compensation - What You Can Earn In the spirit of pay transparency, the base pay range for this role is $21.30 per hour . On top of your base rate, your pay can stack on top of your base pay with: +$2.00 / hour shift differential when working 2nd or 3rd shift +$1.00 / hour for each weekend day worked +$1.25 / hour raise once you complete your training period Benefits - What's in It for You We value our people, and we back that up with a benefits package built for real life: Your health: Medical, dental, and vision insurance after 31 days of employment, plus an on-site clinic so you can get care without leaving work Your peace of mind: Company-funded life insurance Your future: 401(k) retirement savings plan Your time: 2 weeks of paid time off (PTO) after training, 3 sick days, plus 9 paid holidays every year Why Atkins & Pearce? We've been making things since 1817 - that's seven generations of family ownership and more than two centuries of know-how. Today we're one of the most diverse technical textile manufacturers in North America, with thousands of braiding machines and thousands of unique customer applications across aerospace, automotive, medical, military, electrical, and more. When you join us, you join a stable, established company that still feels like family and makes products that matter. Not Sure You Check Every Box? If you're reliable, safety-minded, and ready to learn, we encourage you to apply - even if you've never set foot on a manufacturing floor. We train the right people, and you might be exactly who we're looking for. What to Expect Next A member of our team will review your application and reach out with details on next steps if it looks like a good match. We look forward to hearing from you. Additional Details FLSA Status: Non-Exempt Reports to: Department Manager This job description is not intended to be all-inclusive, and the employee may also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required. It should not be construed as an exhaustive list of all responsibilities, skills, efforts, or working conditions associated with the job, and the employer reserves the right to revise or change job duties and responsibilities as the need arises. This job description does not constitute a written or implied contract of employment. Equal Opportunity Employer Atkins & Pearce is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. We encourage all people to apply regardless of age, gender, gender expression, or criminal conviction history. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Atkins & Pearce makes hiring decisions based solely on qualifications, merit, and business needs at the time. Compensation details: 21.3-26.55 Hourly Wage PI9b83cb5-
11/20/2026
Full time
PERMANENT SCHEDULE IS 2ND SHIFT (3:25pm - 11:55pm) - or - 3RD SHIFT ( 10:35pm-7:05am ). Training is usually on 1st shift (7am-3:30pm), Monday-Friday for 18 weeks. About the Job For more than 200 years, Atkins & Pearce has turned fiber into products that show up everywhere - from aerospace and medical devices to the wick in the candle on your table. We're a 7th-generation, family-owned manufacturer right here in Covington, KY, and our team is growing. Right now, we're looking for dependable Braider Machine Operators to join our 2nd and 3rd shift teams. What You'll Do As a Braider Machine Operator, you'll run a variety of braiding machines and help send quality product out the door. Day to day, you'll: Operate various winders, moving from station to station as neededRun coating machinesPrep and pack finished product for shipmentCheck your work against material specifications so every order meets our quality standards You'll be part of a team that values clear communication and coordination - we use a simple "5+1" communication approach to keep everyone on the same page - while still being trusted to work independently and safely within a production standard. What You Bring A high school diploma or GEDAttention to detail and pride in accurate, quality workA safety-first mindset and a willingness to learn That's it - the rest, we'll teach you. Your Schedule & Work Environment Full-time, 40 hours per week on 2nd shift or 3rd shift (possibly one weekend day on your permanent schedule)Work takes place in our manufacturing facility, where hearing protection is requiredAll appropriate PPE is provided, including a hat or hairnet and hearing protectionThe use of a pair of scissors is required to perform this job This is hands-on, active work. Over the course of a shift, you can expect to: Stand and walk on concrete for the full shiftLift up to 50 lbs. occasionallyWork with your hands and arms above shoulder heightBend or squat occasionallyPerform repetitive motions with your hands and wrists Compensation - What You Can Earn In the spirit of pay transparency, the base pay range for this role is $21.30 per hour . On top of your base rate, your pay can stack on top of your base pay with: +$2.00 / hour shift differential when working 2nd or 3rd shift +$1.00 / hour for each weekend day worked +$1.25 / hour raise once you complete your training period Benefits - What's in It for You We value our people, and we back that up with a benefits package built for real life: Your health: Medical, dental, and vision insurance after 31 days of employment, plus an on-site clinic so you can get care without leaving work Your peace of mind: Company-funded life insurance Your future: 401(k) retirement savings plan Your time: 2 weeks of paid time off (PTO) after training, 3 sick days, plus 9 paid holidays every year Why Atkins & Pearce? We've been making things since 1817 - that's seven generations of family ownership and more than two centuries of know-how. Today we're one of the most diverse technical textile manufacturers in North America, with thousands of braiding machines and thousands of unique customer applications across aerospace, automotive, medical, military, electrical, and more. When you join us, you join a stable, established company that still feels like family and makes products that matter. Not Sure You Check Every Box? If you're reliable, safety-minded, and ready to learn, we encourage you to apply - even if you've never set foot on a manufacturing floor. We train the right people, and you might be exactly who we're looking for. What to Expect Next A member of our team will review your application and reach out with details on next steps if it looks like a good match. We look forward to hearing from you. Additional Details FLSA Status: Non-Exempt Reports to: Department Manager This job description is not intended to be all-inclusive, and the employee may also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required. It should not be construed as an exhaustive list of all responsibilities, skills, efforts, or working conditions associated with the job, and the employer reserves the right to revise or change job duties and responsibilities as the need arises. This job description does not constitute a written or implied contract of employment. Equal Opportunity Employer Atkins & Pearce is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. We encourage all people to apply regardless of age, gender, gender expression, or criminal conviction history. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Atkins & Pearce makes hiring decisions based solely on qualifications, merit, and business needs at the time. Compensation details: 21.3-26.55 Hourly Wage PI9b83cb5-
CNC Machinist III - 1st Shift
Tecomet Wilmington, Massachusetts
Position Summary The CNC Machinist III produces machined parts by operating, setting up computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. May be required to perform some programming. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate, set up, and could program CNC mills, Wire EDM's, and CNC lathes within specified tolerances following work instructions and in accordance with machine programs and engineering drawings Propose new production Set ups and change offsets/tooling in machines as part of the new setup Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained Read and evaluate blueprints or specifications Troubleshoot and understand CNC programs and processes Improve and produce work Instructions Assist Engineering with redesigning fixtures to increase quality standards and productivity, change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings Propose adjusted speeds and feeds for different machining requirements Perform routine maintenance as per daily machine checklist and adhere to PM schedule Perform hand finishing Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues Achieve set productivity targets and identify ways of improving productivity Record all activities in a timely manner on the job tracking system Identify and support Continuous Improvement activities Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required Maintain 5S/housekeeping standards within work area Performs other duties or special projects as required or as assigned by supervisor Qualification Requirements Credentials/Experience: High School diploma or general education degree (GED) 5+ years CNC Machining experience Experience/Educational/Training Preferred: Associate degree/certificate in Tooling & Machining or Machinist apprenticeship preferred GCSE/NVQ Maths and English is desirable (UK only) Knowledge, Skills, and Abilities: Ability to operate, set up, and maintain a CNC Machine Ability to run multiple CNC Machines Ability to set up, adjust offsets and operate and run development and production jobs Ability to program with some level of supervision Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing, and organizing tasks and activities with the ability to deal with competing demands within specified timescales Able to read and follow technical drawings and diagrammed instructions Proven record of quality, on-time production runs Demonstrable commitment to safety always Attention to detail alongside ability to perform repeatable task over a prolonged period Positive attitude, reliable, and a team player Problem solving ability Good communication skills, written and verbal Solid computer skills Ability to train new or lower-level machinist Other Requirements Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Travel Requirements No Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal opportunity employer as to all protected groups, including protected veterans and individuals with Disabilities The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
11/20/2026
Full time
Position Summary The CNC Machinist III produces machined parts by operating, setting up computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. May be required to perform some programming. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate, set up, and could program CNC mills, Wire EDM's, and CNC lathes within specified tolerances following work instructions and in accordance with machine programs and engineering drawings Propose new production Set ups and change offsets/tooling in machines as part of the new setup Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained Read and evaluate blueprints or specifications Troubleshoot and understand CNC programs and processes Improve and produce work Instructions Assist Engineering with redesigning fixtures to increase quality standards and productivity, change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings Propose adjusted speeds and feeds for different machining requirements Perform routine maintenance as per daily machine checklist and adhere to PM schedule Perform hand finishing Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues Achieve set productivity targets and identify ways of improving productivity Record all activities in a timely manner on the job tracking system Identify and support Continuous Improvement activities Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required Maintain 5S/housekeeping standards within work area Performs other duties or special projects as required or as assigned by supervisor Qualification Requirements Credentials/Experience: High School diploma or general education degree (GED) 5+ years CNC Machining experience Experience/Educational/Training Preferred: Associate degree/certificate in Tooling & Machining or Machinist apprenticeship preferred GCSE/NVQ Maths and English is desirable (UK only) Knowledge, Skills, and Abilities: Ability to operate, set up, and maintain a CNC Machine Ability to run multiple CNC Machines Ability to set up, adjust offsets and operate and run development and production jobs Ability to program with some level of supervision Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing, and organizing tasks and activities with the ability to deal with competing demands within specified timescales Able to read and follow technical drawings and diagrammed instructions Proven record of quality, on-time production runs Demonstrable commitment to safety always Attention to detail alongside ability to perform repeatable task over a prolonged period Positive attitude, reliable, and a team player Problem solving ability Good communication skills, written and verbal Solid computer skills Ability to train new or lower-level machinist Other Requirements Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Travel Requirements No Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal opportunity employer as to all protected groups, including protected veterans and individuals with Disabilities The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
CNC Machinist II - 1st Shift
Tecomet Wilmington, Massachusetts
Position Summary The CNC Machinist II produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate and Set-up CNC machines within specified tolerances following work instructions and in accordance with machine programs and engineering drawings. Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear. Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings. Perform routine maintenance as per daily machine checklist and adhere to PM schedule. Perform hand finishing. Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards. Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues. Achieve set productivity targets and identify ways of improving productivity. Record all activities in a timely manner on the job tracking system. Identify and support Continuous Improvement activities. Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required. Maintain 5S/housekeeping standards within work area. Performs other duties or special projects as required or as assigned by supervisor Qualification Requirements Credentials/Experience: High School diploma or general education degree (GED) required 3+ years CNC Machining experience. Experience/Educational/Training Preferred: Associate's degree/certificate in Tooling & Machining or Machinist apprenticeship preferred. Experience of working in a production environment, preferred GCSE/NVQ Math and English is desirable (UK only) Knowledge, Skills, and Abilities: Ability to operate, setting up and maintaining a CNC Machine Ability to run multiple CNC Machines Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing and organizing tasks and activities with the ability to deal with competing demands within specified timescales Ability to follow work instructions Proven record of quality, on-time production runs Demonstrable commitment to safety at all times Attention to detail alongside ability to perform repeatable task over a prolonged period of time Positive attitude, reliable, and a team player Ability to identify problems and escalate as required Good communication skills, written and verbal Solid computer skills Excellent communication and interpersonal skills Other Requirements Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Travel Requirements N/A Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
11/20/2026
Full time
Position Summary The CNC Machinist II produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate and Set-up CNC machines within specified tolerances following work instructions and in accordance with machine programs and engineering drawings. Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear. Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings. Perform routine maintenance as per daily machine checklist and adhere to PM schedule. Perform hand finishing. Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards. Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues. Achieve set productivity targets and identify ways of improving productivity. Record all activities in a timely manner on the job tracking system. Identify and support Continuous Improvement activities. Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required. Maintain 5S/housekeeping standards within work area. Performs other duties or special projects as required or as assigned by supervisor Qualification Requirements Credentials/Experience: High School diploma or general education degree (GED) required 3+ years CNC Machining experience. Experience/Educational/Training Preferred: Associate's degree/certificate in Tooling & Machining or Machinist apprenticeship preferred. Experience of working in a production environment, preferred GCSE/NVQ Math and English is desirable (UK only) Knowledge, Skills, and Abilities: Ability to operate, setting up and maintaining a CNC Machine Ability to run multiple CNC Machines Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing and organizing tasks and activities with the ability to deal with competing demands within specified timescales Ability to follow work instructions Proven record of quality, on-time production runs Demonstrable commitment to safety at all times Attention to detail alongside ability to perform repeatable task over a prolonged period of time Positive attitude, reliable, and a team player Ability to identify problems and escalate as required Good communication skills, written and verbal Solid computer skills Excellent communication and interpersonal skills Other Requirements Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Travel Requirements N/A Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
CNC Machinist III - 1st Shift
Tecomet Wilmington, Massachusetts
Position Summary The CNC Machinist III produces machined parts by operating, setting up computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. May be required to perform some programming. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate, set up, and could program CNC mills, Wire EDM's, and CNC lathes within specified tolerances following work instructions and in accordance with machine programs and engineering drawings Propose new production Set ups and change offsets/tooling in machines as part of the new setup Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained Read and evaluate blueprints or specifications Troubleshoot and understand CNC programs and processes Improve and produce work Instructions Assist Engineering with redesigning fixtures to increase quality standards and productivity, change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings Propose adjusted speeds and feeds for different machining requirements Perform routine maintenance as per daily machine checklist and adhere to PM schedule Perform hand finishing Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues Achieve set productivity targets and identify ways of improving productivity Record all activities in a timely manner on the job tracking system Identify and support Continuous Improvement activities Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required Maintain 5S/housekeeping standards within work area Performs other duties or special projects as required or as assigned by supervisor Qualification Requirements Credentials/Experience: High School diploma or general education degree (GED) 5+ years CNC Machining experience Experience/Educational/Training Preferred: Associate degree/certificate in Tooling & Machining or Machinist apprenticeship preferred GCSE/NVQ Maths and English is desirable (UK only) Knowledge, Skills, and Abilities: Ability to operate, set up, and maintain a CNC Machine Ability to run multiple CNC Machines Ability to set up, adjust offsets and operate and run development and production jobs Ability to program with some level of supervision Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing, and organizing tasks and activities with the ability to deal with competing demands within specified timescales Able to read and follow technical drawings and diagrammed instructions Proven record of quality, on-time production runs Demonstrable commitment to safety always Attention to detail alongside ability to perform repeatable task over a prolonged period Positive attitude, reliable, and a team player Problem solving ability Good communication skills, written and verbal Solid computer skills Ability to train new or lower-level machinist Other Requirements Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Travel Requirements No Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal opportunity employer as to all protected groups, including protected veterans and individuals with Disabilities The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
11/20/2026
Full time
Position Summary The CNC Machinist III produces machined parts by operating, setting up computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. May be required to perform some programming. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate, set up, and could program CNC mills, Wire EDM's, and CNC lathes within specified tolerances following work instructions and in accordance with machine programs and engineering drawings Propose new production Set ups and change offsets/tooling in machines as part of the new setup Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained Read and evaluate blueprints or specifications Troubleshoot and understand CNC programs and processes Improve and produce work Instructions Assist Engineering with redesigning fixtures to increase quality standards and productivity, change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings Propose adjusted speeds and feeds for different machining requirements Perform routine maintenance as per daily machine checklist and adhere to PM schedule Perform hand finishing Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues Achieve set productivity targets and identify ways of improving productivity Record all activities in a timely manner on the job tracking system Identify and support Continuous Improvement activities Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required Maintain 5S/housekeeping standards within work area Performs other duties or special projects as required or as assigned by supervisor Qualification Requirements Credentials/Experience: High School diploma or general education degree (GED) 5+ years CNC Machining experience Experience/Educational/Training Preferred: Associate degree/certificate in Tooling & Machining or Machinist apprenticeship preferred GCSE/NVQ Maths and English is desirable (UK only) Knowledge, Skills, and Abilities: Ability to operate, set up, and maintain a CNC Machine Ability to run multiple CNC Machines Ability to set up, adjust offsets and operate and run development and production jobs Ability to program with some level of supervision Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing, and organizing tasks and activities with the ability to deal with competing demands within specified timescales Able to read and follow technical drawings and diagrammed instructions Proven record of quality, on-time production runs Demonstrable commitment to safety always Attention to detail alongside ability to perform repeatable task over a prolonged period Positive attitude, reliable, and a team player Problem solving ability Good communication skills, written and verbal Solid computer skills Ability to train new or lower-level machinist Other Requirements Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Travel Requirements No Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal opportunity employer as to all protected groups, including protected veterans and individuals with Disabilities The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
CNC Machinist II - 1st Shift
Tecomet Wilmington, Massachusetts
Position Summary The CNC Machinist II produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate and Set-up CNC machines within specified tolerances following work instructions and in accordance with machine programs and engineering drawings. Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear. Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings. Perform routine maintenance as per daily machine checklist and adhere to PM schedule. Perform hand finishing. Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards. Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues. Achieve set productivity targets and identify ways of improving productivity. Record all activities in a timely manner on the job tracking system. Identify and support Continuous Improvement activities. Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required. Maintain 5S/housekeeping standards within work area. Performs other duties or special projects as required or as assigned by supervisor Qualification Requirements Credentials/Experience: High School diploma or general education degree (GED) required 3+ years CNC Machining experience. Experience/Educational/Training Preferred: Associate's degree/certificate in Tooling & Machining or Machinist apprenticeship preferred. Experience of working in a production environment, preferred GCSE/NVQ Math and English is desirable (UK only) Knowledge, Skills, and Abilities: Ability to operate, setting up and maintaining a CNC Machine Ability to run multiple CNC Machines Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing and organizing tasks and activities with the ability to deal with competing demands within specified timescales Ability to follow work instructions Proven record of quality, on-time production runs Demonstrable commitment to safety at all times Attention to detail alongside ability to perform repeatable task over a prolonged period of time Positive attitude, reliable, and a team player Ability to identify problems and escalate as required Good communication skills, written and verbal Solid computer skills Excellent communication and interpersonal skills Other Requirements Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Travel Requirements N/A Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
11/20/2026
Full time
Position Summary The CNC Machinist II produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate and Set-up CNC machines within specified tolerances following work instructions and in accordance with machine programs and engineering drawings. Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear. Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings. Perform routine maintenance as per daily machine checklist and adhere to PM schedule. Perform hand finishing. Always Follow Good Manufacturing and Good Document Practices (GMP/GDP) including completion of job routers/ cards. Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues. Achieve set productivity targets and identify ways of improving productivity. Record all activities in a timely manner on the job tracking system. Identify and support Continuous Improvement activities. Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required. Maintain 5S/housekeeping standards within work area. Performs other duties or special projects as required or as assigned by supervisor Qualification Requirements Credentials/Experience: High School diploma or general education degree (GED) required 3+ years CNC Machining experience. Experience/Educational/Training Preferred: Associate's degree/certificate in Tooling & Machining or Machinist apprenticeship preferred. Experience of working in a production environment, preferred GCSE/NVQ Math and English is desirable (UK only) Knowledge, Skills, and Abilities: Ability to operate, setting up and maintaining a CNC Machine Ability to run multiple CNC Machines Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing and organizing tasks and activities with the ability to deal with competing demands within specified timescales Ability to follow work instructions Proven record of quality, on-time production runs Demonstrable commitment to safety at all times Attention to detail alongside ability to perform repeatable task over a prolonged period of time Positive attitude, reliable, and a team player Ability to identify problems and escalate as required Good communication skills, written and verbal Solid computer skills Excellent communication and interpersonal skills Other Requirements Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Travel Requirements N/A Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities Americans with Disabilities Act (ADA): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
CNC Machine Operators -
Service First Staffing Appleton, Wisconsin
CNC Machine Operator -Direct Hire Employment Type: Direct Hire Shifts: 1st, 2nd, and 3rd shift opportunities may be available Position Summary We are seeking dependable and detail-oriented CNC Machine Operators to join a growing manufacturing team. The CNC Machine Operator will be responsible for setting up, operating, and monitoring CNC machinery to produce quality parts according to specifications. The ideal candidate has strong attention to detail, mechanical aptitude, and a commitment to safety and quality. Responsibilities Operate CNC machines such as mills, lathes, or other machining equipment. Load and unload materials and machine components. Monitor machine operations to ensure parts are produced accurately. Inspect finished parts using measuring tools such as calipers and micrometers. Read and interpret blueprints, work instructions, and production drawings. Make basic machine adjustments as needed. Maintain a clean and organized work area. Follow all safety procedures and quality standards. Report machine issues or production concerns to the supervisor. Qualifications Previous CNC machine operating experience preferred. Ability to read and understand blueprints and basic measurements. Familiarity with measuring tools such as calipers and micrometers. Strong attention to detail and quality. Basic math and mechanical skills. Ability to stand for extended periods and lift materials as required. Reliable attendance and a strong work ethic. What Were Looking For We are interested in candidates who are dependable, motivated, safety-conscious, and take pride in producing quality work. This is a DIRECT HIRE opportunity, meaning qualified candidates will be hired directly by the company not placed on a temporary assignment.
11/20/2026
CNC Machine Operator -Direct Hire Employment Type: Direct Hire Shifts: 1st, 2nd, and 3rd shift opportunities may be available Position Summary We are seeking dependable and detail-oriented CNC Machine Operators to join a growing manufacturing team. The CNC Machine Operator will be responsible for setting up, operating, and monitoring CNC machinery to produce quality parts according to specifications. The ideal candidate has strong attention to detail, mechanical aptitude, and a commitment to safety and quality. Responsibilities Operate CNC machines such as mills, lathes, or other machining equipment. Load and unload materials and machine components. Monitor machine operations to ensure parts are produced accurately. Inspect finished parts using measuring tools such as calipers and micrometers. Read and interpret blueprints, work instructions, and production drawings. Make basic machine adjustments as needed. Maintain a clean and organized work area. Follow all safety procedures and quality standards. Report machine issues or production concerns to the supervisor. Qualifications Previous CNC machine operating experience preferred. Ability to read and understand blueprints and basic measurements. Familiarity with measuring tools such as calipers and micrometers. Strong attention to detail and quality. Basic math and mechanical skills. Ability to stand for extended periods and lift materials as required. Reliable attendance and a strong work ethic. What Were Looking For We are interested in candidates who are dependable, motivated, safety-conscious, and take pride in producing quality work. This is a DIRECT HIRE opportunity, meaning qualified candidates will be hired directly by the company not placed on a temporary assignment.
Fair Oaks Foods, LLC
Machine Operator - 1st Shift
Fair Oaks Foods, LLC Pleasant Prairie, Wisconsin
Machine Operator - 1st Shift Machine Operator Level 1 FLSA Status Non-Exempt Department Operations Reports to Title Production Supervisor Position Summary The Production Machine Operator will safely control various machines and equipment involved in production. Responsibilities Contribute to production operations by following policies and procedures for meat processing; Good Manufacturing Practices, Hazard Analysis and Critical Control Points (HACCP) regulations, etc. Contribute to a safe and sanitary work environment by complying with established procedures and rules. Prepare and assemble meat-processing equipment for operation. Disassemble and prepare meat-processing equipment for sanitation washing Document the production process by maintaining production logs. Contribute to production operations by solving process problems, making equipment adjustments, reporting production and quality data, recording decisions, and referring problems to the Production Supervisor. Attend to the current needs of the process by responding immediately to the expressed orders of the Production Supervisor and/or Production Foreman. Responsible for the quality of work performed and for identifying and documenting quality problems for corrective action and prevention of non-conforming products. Qualifications Level One Qualifications: Ability to understand and follow written and verbal instructions. Ability to follow directions and work well in a team. Ability to interpret and translate engineering designs and documentation. Thorough understanding of or the ability to quickly learn production equipment. Strong analytical and problem-solving skills. Understanding of and the ability to abide by applicable OSHA and environmental regulations. Demonstrated ability to calculate figures and amounts and make adjustments to the machine accordingly. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to fingers, handle, or feel; reach with hands and arms; climb or balance, stoop, kneel, couch, or crawl, talk or hear as defined below. Standard of 8 hours shifts and longer as the company requires Standing and/or walking throughout the shift Lifting /Carrying a minimum of 75 lbs. Use both hands, as necessary Observes safety and security procedures such as Good Manufacturing Practices (GMPs), Material Safety Data (MSD) sheets, Personal Protective Equipment (PPE), LOTO as trained and certified, Emergency Evacuations, and Building Security; Reports potentially unsafe conditions and injuries: near miss/incidents/accidents timely; Uses and cares for company equipment and materials properly. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Fair Oaks Foods assures equal employment opportunity in all its hiring and employment policies and practices, which include all aspects of employment, such as recruiting, hiring, promotions, transfers, demotions, layoffs or terminations, compensation, benefits, training, company-sponsored education, social and recreational programs or events, and all other terms, conditions, and privileges of employment. These policies and practices are administered without regard to "legally protected categories" such as: race, color, religion, national origin, age, gender, disability, marital status, veteran status, sexual orientation or sexual orientation, pregnancy status or medical conditions related to childbirth, and/or any other factor protected by law. _ PIe1f28179e8f9-6897
11/19/2026
Full time
Machine Operator - 1st Shift Machine Operator Level 1 FLSA Status Non-Exempt Department Operations Reports to Title Production Supervisor Position Summary The Production Machine Operator will safely control various machines and equipment involved in production. Responsibilities Contribute to production operations by following policies and procedures for meat processing; Good Manufacturing Practices, Hazard Analysis and Critical Control Points (HACCP) regulations, etc. Contribute to a safe and sanitary work environment by complying with established procedures and rules. Prepare and assemble meat-processing equipment for operation. Disassemble and prepare meat-processing equipment for sanitation washing Document the production process by maintaining production logs. Contribute to production operations by solving process problems, making equipment adjustments, reporting production and quality data, recording decisions, and referring problems to the Production Supervisor. Attend to the current needs of the process by responding immediately to the expressed orders of the Production Supervisor and/or Production Foreman. Responsible for the quality of work performed and for identifying and documenting quality problems for corrective action and prevention of non-conforming products. Qualifications Level One Qualifications: Ability to understand and follow written and verbal instructions. Ability to follow directions and work well in a team. Ability to interpret and translate engineering designs and documentation. Thorough understanding of or the ability to quickly learn production equipment. Strong analytical and problem-solving skills. Understanding of and the ability to abide by applicable OSHA and environmental regulations. Demonstrated ability to calculate figures and amounts and make adjustments to the machine accordingly. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to fingers, handle, or feel; reach with hands and arms; climb or balance, stoop, kneel, couch, or crawl, talk or hear as defined below. Standard of 8 hours shifts and longer as the company requires Standing and/or walking throughout the shift Lifting /Carrying a minimum of 75 lbs. Use both hands, as necessary Observes safety and security procedures such as Good Manufacturing Practices (GMPs), Material Safety Data (MSD) sheets, Personal Protective Equipment (PPE), LOTO as trained and certified, Emergency Evacuations, and Building Security; Reports potentially unsafe conditions and injuries: near miss/incidents/accidents timely; Uses and cares for company equipment and materials properly. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Fair Oaks Foods assures equal employment opportunity in all its hiring and employment policies and practices, which include all aspects of employment, such as recruiting, hiring, promotions, transfers, demotions, layoffs or terminations, compensation, benefits, training, company-sponsored education, social and recreational programs or events, and all other terms, conditions, and privileges of employment. These policies and practices are administered without regard to "legally protected categories" such as: race, color, religion, national origin, age, gender, disability, marital status, veteran status, sexual orientation or sexual orientation, pregnancy status or medical conditions related to childbirth, and/or any other factor protected by law. _ PIe1f28179e8f9-6897

Modal Window

  • Blog
  • Contact
  • About Us
  • Terms & Conditions
  • Privacy
  • Employer
  • Post a Job
  • Search Resumes
  • Sign in
  • Job Seeker
  • Find Jobs
  • Create Resume
  • Sign in
  • Facebook
  • Twitter
  • Instagram
  • Pinterest
  • Youtube
Parent and Partner sites: IT Job Board | Search Jobs Near Me | RightTalent.co.uk | Quantity Surveyor jobs | Building Surveyor jobs | Construction Recruitment | Talent Recruiter | London Jobs | Property jobs
© 2008-2026 My Jobs Near Me