Advanced Molding Technologies, LLC
Circle Pines, Minnesota
Department: Quality Reports To: Quality Lab Supervisor FLSA Status: Non-Exempt Schedule: 2nd Shit (2:00pm-10:30pm Monday through Friday) Compensation: The hourly pay range for this position is $23.00 to $27.00 with an additional $1.00 shift premium on top of the base for 2nd shift. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: The Quality Inspector I performs inspections and tests on raw materials, components, in-process parts, and finished products to verify conformance to approved company and customer requirements. This position uses established inspection instructions and measuring equipment to identify defects, document results, and communicate quality concerns. Working with Quality and Production personnel, the Quality Inspector I supports product identification, traceability, and control of nonconforming material within AMT's plastic injection molding and medical device component manufacturing environment. Essential Duties and Responsibilities: Inspect raw materials, components, in-process parts, and finished products using approved inspection instructions, specifications, drawings, and acceptance criteria. Perform visual and dimensional inspections and assigned tests using calipers, micrometers, gauges, and semi-automated or automated inspection equipment after appropriate training. Verify that the correct inspection documents, product identification, and equipment are being used; seek guidance when requirements are unclear or inspection results are inconsistent. Check measuring equipment for visible damage and current calibration status, where applicable, before use; report equipment concerns and do not use equipment identified as unsuitable for inspection. Accurately document inspection and test results in required records, reports, and quality databases, including nonconformance information and assigned tracking of rework, scrap, and waste. Review product labeling and packaging against approved requirements; apply inspection stamps, tags, or other status identification in accordance with company procedures and assigned authorization. Identify and report suspected nonconforming material; support labeling, segregation, and documentation to prevent unintended use or shipment while awaiting authorized disposition. Communicate inspection findings promptly to Quality and Production personnel; escalate recurring defects, unclear acceptance decisions, and conditions that may affect product quality. Assist with quality investigations by providing inspection results, examples of defects, and observations; suggest potential causes or improvements for review by responsible personnel. Perform assigned reinspection of reworked or sorted product using approved instructions and document results. Maintain organized inspection areas, protect measuring equipment from damage, and handle parts and materials in a manner that preserves identification and prevents damage or contamination. Follow company policies, approved procedures, and applicable ISO 9001, ISO 13485, and FDA-related requirements in support of the Quality Management System. Perform other duties as assigned within the scope of the position. Knowledge, Skills, and Abilities: Basic to intermediate knowledge of inspection practices, injection molding processes, and quality expectations for medical device components. Basic to intermediate use of calipers, micrometers, gauges, and other basic inspection instruments; ability to learn assigned semi-automated and automated inspection equipment. Ability to read and follow inspection instructions, recognize basic dimensional requirements, and compare results with defined acceptance criteria. Basic math skills sufficient to interpret measurements, compare values with tolerances, and accurately record numerical information. Strong attention to detail and ability to recognize visual defects, inconsistencies, and missing or incorrect information. Ability to maintain accurate, legible, and complete inspection records and preserve product and record traceability. Basic working knowledge of Microsoft Excel, Word, Outlook, and Teams and ability to learn quality databases and ERP functions. Ability to communicate findings clearly, ask questions when requirements are uncertain, and work cooperatively with Quality and Production personnel. Strong organizational skills and ability to complete repetitive inspection tasks consistently while maintaining accuracy. Ability to follow safety, material-handling, and contamination-prevention procedures and demonstrate alignment with AMT's Core Values. Education and Experience Requirements: High school diploma or GED required. 2+ years of recent quality control, quality inspection or quality assurance experience. Previous experience in injection molding or medical device manufacturing preferred. Previous experience using measuring instruments, documenting inspection results, or following manufacturing inspection instructions preferred. Previous experience using ERP systems preferred; experience with IQMS is an advantage. Physical Requirements: Ability to stand and walk for extended periods and occasionally lift, carry, push, or pull objects weighing up to 30 pounds. Sufficient hand-eye coordination and manual dexterity to handle small parts and inspection tools and perform repetitive precision measurements. Vision, with or without corrective lenses, sufficient to inspect small details, read digital and analog displays, and review inspection documents and quality charts; ability to distinguish colors when required by assigned inspections. Ability to move throughout production areas and between buildings and bend, stoop, and reach shelves or inspection locations as needed. Ability to work safely where exposure to chemicals used in manufacturing may occur, following applicable handling, disposal, and exposure-control procedures. Ability to wear required personal protective equipment, including safety glasses, hearing protection, and gloves, for assigned activities and extended periods as needed. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 23-27 Hourly Wage PIc18a02ab6-
Department: Quality Reports To: Quality Lab Supervisor FLSA Status: Non-Exempt Schedule: 2nd Shit (2:00pm-10:30pm Monday through Friday) Compensation: The hourly pay range for this position is $23.00 to $27.00 with an additional $1.00 shift premium on top of the base for 2nd shift. Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position's requirements and who bring greater directly related experience may be considered toward the upper end of the range. Position Summary: The Quality Inspector I performs inspections and tests on raw materials, components, in-process parts, and finished products to verify conformance to approved company and customer requirements. This position uses established inspection instructions and measuring equipment to identify defects, document results, and communicate quality concerns. Working with Quality and Production personnel, the Quality Inspector I supports product identification, traceability, and control of nonconforming material within AMT's plastic injection molding and medical device component manufacturing environment. Essential Duties and Responsibilities: Inspect raw materials, components, in-process parts, and finished products using approved inspection instructions, specifications, drawings, and acceptance criteria. Perform visual and dimensional inspections and assigned tests using calipers, micrometers, gauges, and semi-automated or automated inspection equipment after appropriate training. Verify that the correct inspection documents, product identification, and equipment are being used; seek guidance when requirements are unclear or inspection results are inconsistent. Check measuring equipment for visible damage and current calibration status, where applicable, before use; report equipment concerns and do not use equipment identified as unsuitable for inspection. Accurately document inspection and test results in required records, reports, and quality databases, including nonconformance information and assigned tracking of rework, scrap, and waste. Review product labeling and packaging against approved requirements; apply inspection stamps, tags, or other status identification in accordance with company procedures and assigned authorization. Identify and report suspected nonconforming material; support labeling, segregation, and documentation to prevent unintended use or shipment while awaiting authorized disposition. Communicate inspection findings promptly to Quality and Production personnel; escalate recurring defects, unclear acceptance decisions, and conditions that may affect product quality. Assist with quality investigations by providing inspection results, examples of defects, and observations; suggest potential causes or improvements for review by responsible personnel. Perform assigned reinspection of reworked or sorted product using approved instructions and document results. Maintain organized inspection areas, protect measuring equipment from damage, and handle parts and materials in a manner that preserves identification and prevents damage or contamination. Follow company policies, approved procedures, and applicable ISO 9001, ISO 13485, and FDA-related requirements in support of the Quality Management System. Perform other duties as assigned within the scope of the position. Knowledge, Skills, and Abilities: Basic to intermediate knowledge of inspection practices, injection molding processes, and quality expectations for medical device components. Basic to intermediate use of calipers, micrometers, gauges, and other basic inspection instruments; ability to learn assigned semi-automated and automated inspection equipment. Ability to read and follow inspection instructions, recognize basic dimensional requirements, and compare results with defined acceptance criteria. Basic math skills sufficient to interpret measurements, compare values with tolerances, and accurately record numerical information. Strong attention to detail and ability to recognize visual defects, inconsistencies, and missing or incorrect information. Ability to maintain accurate, legible, and complete inspection records and preserve product and record traceability. Basic working knowledge of Microsoft Excel, Word, Outlook, and Teams and ability to learn quality databases and ERP functions. Ability to communicate findings clearly, ask questions when requirements are uncertain, and work cooperatively with Quality and Production personnel. Strong organizational skills and ability to complete repetitive inspection tasks consistently while maintaining accuracy. Ability to follow safety, material-handling, and contamination-prevention procedures and demonstrate alignment with AMT's Core Values. Education and Experience Requirements: High school diploma or GED required. 2+ years of recent quality control, quality inspection or quality assurance experience. Previous experience in injection molding or medical device manufacturing preferred. Previous experience using measuring instruments, documenting inspection results, or following manufacturing inspection instructions preferred. Previous experience using ERP systems preferred; experience with IQMS is an advantage. Physical Requirements: Ability to stand and walk for extended periods and occasionally lift, carry, push, or pull objects weighing up to 30 pounds. Sufficient hand-eye coordination and manual dexterity to handle small parts and inspection tools and perform repetitive precision measurements. Vision, with or without corrective lenses, sufficient to inspect small details, read digital and analog displays, and review inspection documents and quality charts; ability to distinguish colors when required by assigned inspections. Ability to move throughout production areas and between buildings and bend, stoop, and reach shelves or inspection locations as needed. Ability to work safely where exposure to chemicals used in manufacturing may occur, following applicable handling, disposal, and exposure-control procedures. Ability to wear required personal protective equipment, including safety glasses, hearing protection, and gloves, for assigned activities and extended periods as needed. Benefits: Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities. Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law. Compensation details: 23-27 Hourly Wage PIc18a02ab6-
