841 jobs found

Traffic Control Technician II Title: Traffic Control Technician II Classification: Non-Exempt About the Organization RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations.At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees. POSITION SUMMARY: The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions. ESSENTIAL FUNCTIONS: Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned. EDUCATION, EXPERIENCE AND SKILLS REQUIRED: Valid Driver's License. 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred). EOE Statement RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans Compensation details: 20-22 Hourly Wage PIaf01789bad92-7831

Maintenance Technician C (I) Transdev in Baltimore, MD is seeking a C-Level Mechanic to bolster our team. This role demands expertise in diagnosing, repairing, and maintaining engines across various vehicles and equipment. As a Mechanic, you'll play a crucial role in ensuring safety, efficiency, and longevity for our vehicles. A Mechanic C must be able to diagnose and repair all vehicles in revenue fleet. They must be able to perform tasks assigned relating to the general repairs of brakes, alternators, water pumps, tires, etc. with minimal assistance from the Mechanics A and B. You must possess your own tools and have a valid Driver's License. Transdev is proud to offer: CBA Position: Position subject to Collective Bargaining Agreement: $31.32 - $32.32 (Union Collective Bargaining Agreement Payscale) Starting pay $31.32 with progression to $32.32 over 1 year Benefits include: Vacation after 1 year of service:80 hours Perfect Attendance PTO:Eligible full-time employees will receive an additional (32) hours of PTO per year Paid Sick Leave:Employees with less than 1 year of service shall accrue up to 40 hours of sick leave in accordance with the Maryland Healthy Working Families Act and shall be able to start using this accrued time on the 107th day following the employees date of hire. Company paid ASE testing, training materials, and tool reimbursement. Key Responsibilities: Perform repairs and replacements on engines, ensuring optimal functionality. Assist A-Level and B-Level Mechanics in advanced diagnostic and repair tasks, contributing to efficient workflow. Executive routine maintenance tasks to prevent breakdowns and optimize engine performance. Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies for engines. Perform advanced troubleshooting and repair tasks on engines, including overhauling and rebuilding components to required specifications. Other duties as required. Qualifications: 2-3 years of experience as a Mechanic ASE certifications; ASE certification program provided Mechanic's Tool Set. Must be able to work shifts or flexible work schedules as needed. Subject to a DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Physical Requirements: The essential functions of this position require the ability to: Stand for extended periods (up to 8-12 hours per day); frequently walk for long distances and on possible sloped ground or slippery and uneven surfaces Push and pull objects up to 50 pounds, occasionally throughout the workday; lift material weighing up to 50 lbs. with or without assistance; occasionally bend, kneel, or crouch to files or equipment stored at ground level. Withstand heavy traffic areas while performing the duties of the job; tolerate exposure to considerable amounts of dust, vehicle fumes and noice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Transdev complies with federal and state disability laws and makes reasonable accommodations for applicants and candidates with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, please contact Drug-free workplace: Transdev maintains a drug-free workplace. Applicants must: Be eligible to work in the United States without requiring sponsorship now or in the future (if based in the U.S.). Successfully pass a pre-employment drug screen. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video at The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. California applicants: Please Click Here for CA Employee Privacy Policy. Job Category: Maintenance Job Type: Full Time Req ID: 7885 Pay Group: X60 Cost Center: 156 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video .

Job Description POSITION: Industrial Maintenance Technician DEPARTMENT: Maintenance LOCATION: Flower Mound, Texas REPORTS TO: Maintenance Manager SHIFT: Night Shift STATUS: Level 4 Long term reliability and mentor Technician GENERAL PURPOSE This position will perform industrial maintenance and repairs for assigned equipment and facilities while providing value by safely and efficiently supporting the production team DUTIES AND RESPONSIBILITIES: Maintain, troubleshoot, PM, and repair equipment in assigned area with no guidance needed Interview, provide feedback and mentorship for prospected team members throughout the onboarding process through the completion of their probationary period providing weekly updates to the maintenance supervisor on their progress. Champion assigned asset category and any other equipment assigned working closely with OEM using reliability centered maintenance as a focus and root cause analysis, FIIX data and planning / scheduling to effectively improve overall asset reliability. Use root cause analysis tools such as 5 whys, fishbone diagram or failure mode and effect analysis (FMEA) Use FIIX CMMS to specifically dive into data and root cause analysis. Lead others in 5S methodology in all areas of maintenance including but not limited to our tool box and storage areas, parts room, shop tables and all assets in the shop. Have an audit ready 24/7 mentality and ensure that all other tech levels are mentored in that way. Understand and know the departmental goal as they are updated annually by quarter, as well as the leading and lag indicators that are measured and applied and how each one impact the main goal of improving reliability. Train and mentor others specifically around troubleshooting and following processes using learn lab assets as well as assets offline to create training work orders and assign to technicians to perform corrections showing their work. Provide and track feedback for continuous improvement. Maintain open and accurate communication with other maintenance employees as well as supervision. Complete all assigned work orders completely and accurately documenting all prudent information describing the completion of the work order. Complete FIIX documentation entry as dictated by maintenance tasks, repairs, and PMs. Perform technical maintenance tasks under close supervision. Provide all information necessary to maintain proper parts inventories. Work with outside contractors to complete projects and improvements wherever possible. Maintain all facility grounds and services. Perform all work in a safe manner following all Company safety policies and procedures. Other duties and responsibilities as needed. SKILLS AND ABILITIES: High School Diploma or G.E.D., and 10 years experience in a maintenance occupation in a manufacturing environment; or equivalent combination of education and experience sufficient to successfully perform the essential duties. Ability to train and develop others using training assets as well as instruction on rebuilds, repairs and PM of all assets assigned by maintenance leadership. Programming of VFD Understanding Digital Logic Systems Understanding Process Measurement Understanding and knowledge of PLC's Knowledge of single & three phase motors Reading Schematics Strong knowledge of transformers & A.C. Circuits Reading blueprints Rigging skills Strong knowledge of electricity up to 480V Working knowledge of every energy source for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.). Ability to maintain plant utilities (lighting, water systems, drain systems, etc.). Ability to work independently. Be able to measure, cut, thread, and join stainless, black iron, plastic, and copper piping. Strong understanding of various diagnostic equipment including but not limited to ohms meter, voltage meters, etc. basic knowledge and understanding of power equipment to include cut-off saws, demo-saws, drills, etc. 30-hour OSHA Training Thoroughly understand and follow all OSHA and Company regulations as they relate to the maintenance field (LOTO, NFPA70E, CSE, PPE, etc.). Complete understanding of critical FIIX procedures and requirements and be able to enter and populate computerized tracking systems. Strong written and verbal skills. Completion of Level III Assessment Training. (Required) The above statements are intended to describe the general nature of the position and may not include all of the duties required of the position. MI Windows and Doors, LLC is an EEO employer and values diversity. What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

Job Summary: Can you imagine walking around the Disneyland Resort, knowing you help the fun stay up and running? If you're interested in doing work that makes people feel happy and safe, keep reading We're looking for skilled, confident Electronic Technicians who have experience maintaining and repairing equipment like the rides and attractions at the Disneyland Resort. If this sounds like a challenge you're ready to undertake, apply today to join the team! This position currently reports to the Reliability Manager. We proudly and enthusiastically welcome Electronic Technicians with experience in the US Military. Responsibilities: You would join a unit whose mission is to keep everything working perfectly - it's all about minimizing downtime and maximizing Guest experience. Your skills will help keep the kids smiling and the parents feeling relaxed and secure. Every day as an Electronic Technician is different. On any given day or night, you might: Be called to repair circuits/assemblies at Pirates of the Caribbean Troubleshoot high-efficiency laser lighting systems for one of the Main Street parades Re-set breakers on Haunted Mansion Perform preventive maintenance on the rides in Pixar Pier Repair and maintain electrical/electronic systems/assemblies on " it's a small world " Replace/install lamps and switches to keep the parks light and bright Insure the Monorail hums along with PLC preventive maintenance Work on animations like the Yeti on Matterhorn Bobsleds , on R2D2, and on The Little Mermaid - Ariel's Undersea Adventure Use your experience and know-how to spot problems before they happen Experience the Parks at night, when the Guests have left and it's just you and the rides Enjoy Disney with your exclusive Cast Member perks, including steep discounts on things people like you enjoy Basic Qualifications: We proudly and enthusiastically welcome Electronic Technicians with experience in the US Military. To be successful in this role, you will need: Technical competence, the ability to read and understand detailed instructions, blueprints, flowcharts, schematics and engineering documents, and pass all compliance necessary for technical and safety training Knowledge of control and repair of circuits and motor Sharp troubleshooting skills and comfort working alone or as part of a team Ability to evaluate the scope of a job, determine needed parts/materials, and order through authorized vendors Expertise using common hand tools, meters, gauges and other associated test and measurement equipment, as well as ability to measure current, voltage and amperage Mastery of the basic math skills needed to do the job, the ability to differentiate colors, computer literacy, and full understanding of the National Electric Code Familiarity with CCTV systems, audio/public address systems, theatrical lighting fixtures, video projectors, and wireless networks Reliable on-time behavior and the flexibility to work at night as well as on weekends/holidays Good communication skills with outside vendors as well as fellow Cast Members, a Guest/customer focus, high energy, respect for diversity, reliability, and a can-do, team-first attitude Stamina and the physical ability to undertake the job. You might walk, bicycle, bend, kneel, climb, push vehicles to re-position them for repair, work with arms/hands above shoulder level for an extended period of time, climb (sometimes as high as 200 ft.) and more, all on a regular basis Ability to use 2-way radios, learn CMMS (MAXIMO work order system), and attend/pass compliance and other training sessions to ensure correct maintenance documentation Electronic Technicians may work outdoors in all weather conditions, in an industrial workshop, in kitchens with wet/slippery surfaces, and may have occasional exposure to high temperatures, noise levels and fumes In addition to the physical tasks listed above, Electronic Technicians may need to push/pull and/or lift up to 10 lbs. constantly, up to 25 lbs. frequently, up to 75 lbs. occasionally, and rarely up to/over 100 lbs. Preferred Qualifications: 2 years of experience Ideal backgrounds include trade school, apprenticeship and related experience Preferred Education We're more interested in your years of experience - and your mastery of the skills needed to do the job well - than a degree, but education in the field is always welcome. We proudly and enthusiastically welcome Electronic Technicians with experience in the US Military. Additional Information: SCHEDULE AVAILABILITY Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. SUBMITTING YOUR APPLICATION After clicking " Apply Now " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " Next " on each page, then " Submit " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere, electronic, electronic technician, component-level troubleshooting, soldering The pay rate for this role in California is $36.92 to $46.45 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the employee's job-related knowledge, skills, experience and seniority or adjusted service date, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: .

Location: Jerry's Foods Sanibel Reports to: Assistant Store Director / Operations Manager Classification: Nonunion Rate of Pay: Up to $21.00 an hour / depending on experience Hours: Sunday - Saturday, varied hours Jerry's work perks: Store Discount Paid Time Off Health Insurance Vision / Dental Insurance Employee Assistance Programs 401K Flexible Schedule Individuals applying for this position should be willing to: Make lasting connections with our customers Ensure all processes and procedures are executed properly for a safe and sanitary store Prioritize and establish work lists to maintain a steady amount of work for employees Create and manage weekly work schedules for entire team (if applicable) Train all Clean Team/Courtesy employees on proper equipment use and sanitation standards Maintain a register of hazardous chemicals Manage routine servicing of backroom equipment, including balers, compactors, and pallet jacks Respond promptly to urgent facility issues at the store or other Jerry's property Ensure third party technicians comply with store safety policies and check in procedures Work with the team on all tasks necessary to have an awesome department Help maintain Jerry's owned properties on the island per management request Jerry's would love to see an individual who: Is friendly and outgoing and promotes customer service for the entire team Has experience working in janitorial services or maintenance position (2-3 years preferred) Knows about proper chemical usage, storage, and removal Communicates equipment/building structure issues that prevent sanitation efforts Is motivated to grow their career and continue learning GROW with Jerry's Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule PHYSICAL REQUIREMENTS: FREQUENT: 15% of the work shift or at least ten repetitions per work shift. OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift. FREQUENT: Physical lifting/carrying to 50 lbs., pushing/pulling over 50 force lbs. walking, reaching, standing, stooping/bending, squatting repetitive motion: turning, bending equipment operation: scanner, scale, label machine, mixer, oven, bread slicer, scraper knives, baker rack, box cutter, pallet jack, pan washer Mental judgment/decision making, social skills/verbal interaction, memorization, reading, writing, math, basic computer skills OCCASIONAL: Physical lifting/carrying over 50 lbs., equipment operation (calculator), climbing ladders, kneeling, crawling ENVIRONMENTAL: extended exposure to varying temperatures and wet surfaces, working with hot grease Position functions and physical requirements may vary between locations. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Americans with Disabilities Act (ADA) Jerry's Enterprises, Inc. will provide reasonable accommodations (such as a qualified sign language interpreter or other personal assistance) with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit the store to which you are applying. Equal Employment Opportunity (EEO) In accordance with all requirements of federal, state, and local law, Jerry's Enterprises, Inc. is an Equal Employment Opportunity employer. Jerry's Enterprises, Inc. prohibits discrimination in recruiting, hiring, training, promotion, termination, pay, discipline, transfer, fringe benefits, job training, classification, referral and all other aspects of employment on the basis of age, race, color, creed, religion, national origin, ancestry, sex, pregnancy (including lactation, child birth, or related conditions), physical or mental disability, marital status, familial status, veteran/military status, sexual orientation, gender identity or expression, genetic information, status with regard to public assistance, membership or activity in a local commission or any other status protected by federal, state or local law. Privacy We respect our applicants' privacy. Applicants will be required to provide specific information to complete the application process. The information you provide, unless otherwise specified, will only be used in regard to our employment decision.

Job Description Configuration Specialist IV Pay Range: $96,000 - $125,000 depending on relevant experience and qualifications Location: North Venice, FL 34275 Please note that this is not a remote/hybrid position. You will be working from our North Venice, FL location. Responsibilities The Configuration Specialist IV provides senior-level ownership for complex configuration, product knowledge, pricing, quoting, EDI, and integration work across MITER, including Vendo and related external quoting systems. This role supports new brands and product lines, pricing structure changes, product knowledge releases, custom code updates, external system mappings, and production impacting configuration needs. The Level IV scope provides the technical depth, independent decision making, and team guidance needed to improve order accuracy, strengthen internal capability, and reduce reliance on vendor support. Creates and maintains new product lines and pricing structures across Miter Brands. Performs additions and changes to OneLink custom code using VB.NET programming. Creates and maintains mappings from external quoting systems, including EDI processing and maintenance. Collaborates with business analysts, manufacturing, engineering, code compliance, and IT teams to align product, compliance, and production requirements with configuration and product knowledge updates. Manages product knowledge (PK) catalog publishing to external customer systems and supports recurring OneLink PK releases. Manages quoting tool upgrades, including product knowledge and software upgrades, database maintenance, archiving of old product knowledge, and creation and maintenance of OneLink installers. Provides guidance and technical support to internal teams and external customers for quoting, catalog, and product knowledge related configuration needs. Provides assistance and guidance to Configuration Technicians and Configuration Specialists I, II, and III as needed. Qualifications Bachelor's degree in Computer Science, Software Engineering, Business Systems, or a related field, or equivalent experience. Minimum of 7 years of experience in a Configuration Specialist position or equivalent configuration, product knowledge, quoting tool, ERP/CPQ, or manufacturing systems role. Advanced knowledge of PGT and MI Brands, OneLink where applicable, product knowledge structures, pricing configuration, and external quoting system integrations. Working knowledge of VB.NET programming to perform basic custom code additions and changes. Advanced knowledge of window and door products, manufacturing processes, BOM structures, EDI, fabrication equipment support, and production-facing configuration requirements. Strong analytical, troubleshooting, documentation, communication, and cross-functional coordination skills. Ability to work independently under minimal supervision and provide guidance to lower-level Configuration team members. Advanced experience in configuration, product knowledge, quoting, pricing, ERP/CPQ, EDI, or manufacturing-facing systems supporting MITER. Experience with OneLink, PK catalog publishing, scheduled product knowledge releases, external customer system support, and cross-functional issue resolution. Demonstrated ability to troubleshoot complex configuration issues, coordinate across business and technical teams, and guide lower-level Configuration resources. Willing to travel domestically up to 10% MITER Brands is a residential window and door manufacturer that provides a leading portfolio of window and door brands for the new construction and replacement segments. MITER Brands, also known as Milgard, MI Windows & Doors and PGTI is one of the nation's largest suppliers of vinyl windows and patio doors, with plants across the country. What We Offer At MITER Brands, we invest in your health, wealth, and wellness. Our comprehensive benefits package supports you and your eligible spouse/dependents while helping you achieve your personal and professional goals. We offer competitive pay, a 401(k) with company match, and generous paid time off to help you maintain a healthy work-life balance. Health & Wellness Three comprehensive medical plan options Prescription drug coverage Dental insurance Vision insurance Teladoc virtual healthcare services Employee Assistance Program (EAP) Annual Wellness Clinic Financial Protection Company-paid Life Insurance Voluntary Life Insurance Company-paid Short-Term Disability Company-paid Long-Term Disability Supplemental Hospital Indemnity Insurance Critical Illness Insurance Accident Insurance Additional Benefits Paid Time Off (PTO) and paid holidays 401(k) retirement plan with company match Tuition Reimbursement Program Legal Insurance Identity Theft Protection Pet Insurance Team Member Discount Program MITER Brands, including MI Windows and Doors, Milgard, and PGT Innovations, is an Equal Opportunity Employer. We are committed to fostering an inclusive workplace and do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, or any other protected status under applicable law. Work Authorization and Sponsorship Disclosure: The Company does not offer employer sponsorship at this time. Therefore, candidates must provide truthful and complete information regarding their eligibility to work in the U.S. and any current or future need for employment sponsorship. Misrepresentation regarding work authorization or sponsorship need at any stage of the hiring process will result in disqualification from consideration, rescission of an employment offer, or termination of employment.

Traffic Control Technician II RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations. At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees. POSITION SUMMARY: The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions. ESSENTIAL FUNCTIONS: Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned. EDUCATION, EXPERIENCE AND SKILLS REQUIRED: Valid U.S. Driver's License, with a good driving record 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper PPE: safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Lift regularly throughout the shift. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred). RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans Compensation details: 17.5-18 Hourly Wage PI71a971ce0d32-7839

Location: Jerry's Foods Sanibel Reports to: Assistant Store Director / Operations Manager Classification: Nonunion Rate of Pay: Up to $21.00 an hour / depending on experience Hours: Sunday - Saturday, varied hours Jerry's work perks: Store Discount Paid Time Off Health Insurance Vision / Dental Insurance Employee Assistance Programs 401K Flexible Schedule Individuals applying for this position should be willing to: Make lasting connections with our customers Ensure all processes and procedures are executed properly for a safe and sanitary store Prioritize and establish work lists to maintain a steady amount of work for employees Create and manage weekly work schedules for entire team (if applicable) Train all Clean Team/Courtesy employees on proper equipment use and sanitation standards Maintain a register of hazardous chemicals Manage routine servicing of backroom equipment, including balers, compactors, and pallet jacks Respond promptly to urgent facility issues at the store or other Jerry's property Ensure third party technicians comply with store safety policies and check in procedures Work with the team on all tasks necessary to have an awesome department Help maintain Jerry's owned properties on the island per management request Jerry's would love to see an individual who: Is friendly and outgoing and promotes customer service for the entire team Has experience working in janitorial services or maintenance position (2-3 years preferred) Knows about proper chemical usage, storage, and removal Communicates equipment/building structure issues that prevent sanitation efforts Is motivated to grow their career and continue learning GROW with Jerry's Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule PHYSICAL REQUIREMENTS: FREQUENT: 15% of the work shift or at least ten repetitions per work shift. OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift. FREQUENT: Physical lifting/carrying to 50 lbs., pushing/pulling over 50 force lbs. walking, reaching, standing, stooping/bending, squatting repetitive motion: turning, bending equipment operation: scanner, scale, label machine, mixer, oven, bread slicer, scraper knives, baker rack, box cutter, pallet jack, pan washer Mental judgment/decision making, social skills/verbal interaction, memorization, reading, writing, math, basic computer skills OCCASIONAL: Physical lifting/carrying over 50 lbs., equipment operation (calculator), climbing ladders, kneeling, crawling ENVIRONMENTAL: extended exposure to varying temperatures and wet surfaces, working with hot grease Position functions and physical requirements may vary between locations. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Americans with Disabilities Act (ADA) Jerry's Enterprises, Inc. will provide reasonable accommodations (such as a qualified sign language interpreter or other personal assistance) with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit the store to which you are applying. Equal Employment Opportunity (EEO) In accordance with all requirements of federal, state, and local law, Jerry's Enterprises, Inc. is an Equal Employment Opportunity employer. Jerry's Enterprises, Inc. prohibits discrimination in recruiting, hiring, training, promotion, termination, pay, discipline, transfer, fringe benefits, job training, classification, referral and all other aspects of employment on the basis of age, race, color, creed, religion, national origin, ancestry, sex, pregnancy (including lactation, child birth, or related conditions), physical or mental disability, marital status, familial status, veteran/military status, sexual orientation, gender identity or expression, genetic information, status with regard to public assistance, membership or activity in a local commission or any other status protected by federal, state or local law. Privacy We respect our applicants' privacy. Applicants will be required to provide specific information to complete the application process. The information you provide, unless otherwise specified, will only be used in regard to our employment decision.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: No CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aeronautics Systems has an opening for a Principal Flight-Critical Hardware Avionics Engineer (Level 3) or Senior Principal Flight-Critical Hardware Avionics Engineer (Level 4) to join our Air Vehicle Hardware Avionics team of qualified, diverse individuals. This role will be located in Rancho Bernardo (San Diego), CA. Note: This position requires regular presence at our Rancho Bernardo (San Diego) site, with a hybrid work schedule that includes both remote work and on-site lab work as needed to support business needs. The Hardware Avionics group is responsible for management of the Identification-Friend-Foe (IFF) and Traffic Alert and Collision Avoidance System (TCAS) subsystems. The selected individual will work independently and collaborate across multiple teams to deliver quality solutions for the IFF and TCAS systems. General duties include lab and flight testing, production and field support, anomaly resolution, and supplier management. The role is dynamic as members of the team handle a broad range of activities across multiple phases of the program to include development, production, and operational support. Key Responsibilities may include, but are not limited to: Integrate IFF and TCAS hardware, accounting for hardware capabilities / limitations, defining interfaces, and addressing interoperability standards. Conduct investigations, system testing, and flight testing in lab environments. Provide remote and on-site troubleshooting for production and field issues. Support proposal development and evaluation, technical planning, verification & validation, cost & risk analysis, and trade studies. Ensure the logical and systematic conversion of customer or product requirements into total system solutions that balance technical, schedule, and cost constraints. We offer flexible work arrangements, including a 9/80 schedule, to support work-life balance. Employees benefit from excellent learning opportunities and work on impactful, cutting-edge projects. Our collaborative and friendly team environment encourages professional growth and innovation. Basic Qualifications: This requisition may be filled at a Principal Flight-Critical Hardware Avionics Engineer (Level 3) or Senior Principal Flight-Critical Hardware Avionics Engineer (Level 4) level based on the qualifications below. Principal Flight-Critical Hardware Avionics Engineer (Level 3) Must have a Bachelor of Science degree in a STEM discipline AND 5 years of related professional/military experience, OR a Master's degree AND 3 years of related professional/military experience, OR a Ph.D. AND 1 year of related professional/military experience. Must have the ability to obtain and maintain a US Government Secret clearance and Special Access Program (SAP) within a reasonable amount of time as determined by business needs. Hands-on experience with lab test equipment. (such as oscilloscopes, signal generators, signal analyzers, or multimeters.) Experience with software/hardware development, integration, test, verification, or troubleshooting. Experience using engineering tools such as MATLAB and core Microsoft Office applications (such as Word, Excel, Project, Visio, etc.). Senior Principal Flight-Critical Hardware Avionics Engineer (Level 4) Must have a Bachelor of Science degree in a STEM discipline AND 8 years of related professional/military experience, OR a Master's degree AND 6 years of related professional/military experience, OR a Ph.D. AND 4 years of related professional/military experience. Must have the ability to obtain and maintain a US Government Secret clearance and Special Access Program (SAP) within a reasonable amount of time as determined by business needs. Hands-on experience with lab test equipment. (such as oscilloscopes, signal generators, signal analyzers, or multimeters.) Experience with software/hardware development, integration, test, verification, or troubleshooting. Experience using engineering tools such as MATLAB and core Microsoft Office applications (such as Word, Excel, Project, Visio, etc.). Preferred Qualifications Experience with IFF and/or TCAS transponders, including their operation, maintenance, integration, or design. Active U.S Government Secret security clearance or higher Comprehensive knowledge of IFF, including military and civilian modes and associated certifications Comprehensive knowledge of TCAS, including Due Regard and airspace integration High-level understanding of radio-frequency communication Familiarity with interfaces and related protocols, such as MIL-STD-1553, RS-485, ARINC-429 Experience performing system-level design/troubleshooting Flight test, supplier management, requirements development and verification experience Prior experience as a military, civil, or commercial avionics technician Primary Level Salary Range: $114,000.00 - $171,000.00 Secondary Level Salary Range: $142,200.00 - $213,400.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.