Additional Information Job Number Job CategoryEngineering & Facilities Locationth Avenue South, NASHVILLE TN 37203, United States VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels' mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We're here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests' passions to life. If you are original, innovative, and always looking towards the future of what's possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
10/14/2026
Full time
Additional Information Job Number Job CategoryEngineering & Facilities Locationth Avenue South, NASHVILLE TN 37203, United States VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels' mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We're here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests' passions to life. If you are original, innovative, and always looking towards the future of what's possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
Marriott International, Inc
Ponte Vedra Beach, Florida
Additional Information Job Number Job CategoryEngineering & Facilities Location1000 TPC Blvd, Ponte Vedra Beach FL 32082, United States VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver's License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of "Wonderful Hospitality. Always." by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that's synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you're happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand's namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you'll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That's The JW Treatment . In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
10/14/2026
Full time
Additional Information Job Number Job CategoryEngineering & Facilities Location1000 TPC Blvd, Ponte Vedra Beach FL 32082, United States VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC. Display advanced engineering operations skills and general mechanical ability. Display professional journeyman level expertise in at least three of the following areas with basic skills in the remaining: air conditioning and refrigeration, electrical, plumbing, carpentry and finish skills, mechanical, general building management, pneumatic/electronic systems and controls, and/or energy conservation. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Perform routine inspections of the entire property, noting safety hazards, lack of illumination, down equipment (such as ice makers, fans, extractors, pumps), and take immediate corrective action. Inspect and repair all mechanical equipment including, but not limited to: appliances, HVAC, electrical and plumbing components, diagnose and repair of boilers, pumps and related components. Use the Lockout/Tagout system before performing any maintenance work. Display thorough knowledge of maintenance contracts and vendors. Display advanced knowledge of engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineers I, II, and III) as necessary and supervise work in progress and act in a supervisory role in the absence of supervisors and/or management. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers and/or point of sale systems. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Certificate in two-year technical diploma program for HVAC/refrigeration. Related Work Experience: Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Valid Driver's License License or certification in refrigeration or electrical (earned, or currently working towards receiving) Universal Chlorofluorocarbon (CFC) certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of "Wonderful Hospitality. Always." by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that's synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you're happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand's namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you'll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That's The JW Treatment . In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
Additional InformationPlant Operator/HVAC Technician Job Number Job CategoryEngineering & Facilities Location400 South Collier Boulevard, Marco Island FL 34145, United States VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of "Wonderful Hospitality. Always." by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that's synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you're happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand's namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you'll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That's The JW Treatment . In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
10/14/2026
Full time
Additional InformationPlant Operator/HVAC Technician Job Number Job CategoryEngineering & Facilities Location400 South Collier Boulevard, Marco Island FL 34145, United States VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of "Wonderful Hospitality. Always." by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that's synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you're happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand's namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you'll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That's The JW Treatment . In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
Our client is seeking a Project Engineer III to mentor junior engineers and CAD designers in General/Physical Layout and Protection & Control packages for renewables and substation design projects. This role will act as the sealing engineer for most team deliverables, manage customer relations, and support business development with select clients. Job Responsibilities Provide technical mentorship to junior engineers and CAD designers. - Act as the sealing engineer for project deliverables. - Lead engineering efforts substation design and utility interconnections, including physical layout, protection/control/SCADA design, relay settings, field support, commissioning, and relay testing. - Perform and oversee engineering calculations, project design, and drawing reviews to ensure quality and accuracy. - Prepare and review project documents, including specifications and bid packages. - Serve as the primary point of contact for clients, ensuring project alignment and customer satisfact Job Requirements Bachelor"s degree in Electrical Engineering. - 4-9 years of experience in substation or renewable energy engineering. - Professional Engineer (PE) license required. - Strong understanding of protection and control design, relay settings, and commissioning. - Experience managing multiple projects and collaborating with cross-functional teams. - Proficiency with industry-standard engineering software and Microsoft Office tools. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at
10/14/2026
Full time
Our client is seeking a Project Engineer III to mentor junior engineers and CAD designers in General/Physical Layout and Protection & Control packages for renewables and substation design projects. This role will act as the sealing engineer for most team deliverables, manage customer relations, and support business development with select clients. Job Responsibilities Provide technical mentorship to junior engineers and CAD designers. - Act as the sealing engineer for project deliverables. - Lead engineering efforts substation design and utility interconnections, including physical layout, protection/control/SCADA design, relay settings, field support, commissioning, and relay testing. - Perform and oversee engineering calculations, project design, and drawing reviews to ensure quality and accuracy. - Prepare and review project documents, including specifications and bid packages. - Serve as the primary point of contact for clients, ensuring project alignment and customer satisfact Job Requirements Bachelor"s degree in Electrical Engineering. - 4-9 years of experience in substation or renewable energy engineering. - Professional Engineer (PE) license required. - Strong understanding of protection and control design, relay settings, and commissioning. - Experience managing multiple projects and collaborating with cross-functional teams. - Proficiency with industry-standard engineering software and Microsoft Office tools. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at
Hybrid + Relocation Assistance + Own Full Machine Designs + 30% Growth + Promote-From-Within Culture This Jobot Job is hosted by: Dominique DeMarco Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $90,000 - $110,000 per year A bit about us: We're a division of a global, publicly traded industrial manufacturer with more than a century of history. Our division designs and builds capital equipment used to assemble printed circuit boards for automotive, medical, military, and consumer electronics manufacturers. We operate like a midsize company, with the stability, benefits, and resources of a large one. Demand is climbing with the growth of AI and advanced electronics, and we expect 30%+ growth this year. Our R&D is customer-driven: we go to our customers, learn what they need, and build it. Our team is tenured, turnover is low, and we promote from within. Why join us? Technical ownership: you own complete machine designs, from electrical architecture through production. A seat being elevated: this is a newly leveled senior role with the chance to shape standards and help build the team. High visibility: in a smaller engineering organization, your contributions are seen and matter. Variety: new product development and sustaining work across three product lines means few days look the same. Stability and growth: a long-established global leader in a growing market, with a promote-from-within culture. Strong benefits: PPO medical, dental, life and LTD insurance, 401(k) with a match that increases over time, paid parental leave, and generous tuition reimbursement. Balance: hybrid schedule and a culture known for strong work-life balance. Job Details Position Summary The Electrical Engineer III is the technical leader for electrical engineering at our site, guiding both new product development and sustaining engineering across three product lines. You define electrical system architecture, lead complex design efforts, and ensure our equipment meets performance, reliability, manufacturability, cost, and regulatory requirements. You serve as the primary electrical lead on customer-driven development projects and work closely with Mechanical Engineering, Software Engineering, Product Management, Manufacturing, Quality, Supply Chain, and global engineering teams to take products from concept through production. Key Responsibilities Define and own electrical system architecture for new and existing equipment platforms. Design, develop, modify, test, and evaluate electrical and electromechanical systems, including control panels, power distribution, and circuitry. Develop electrical designs and schematics, select components, and complete electrical documentation from concept through product launch. Lead customer-driven development projects: gather requirements, evaluate feature requests, and translate customer needs into technical solutions. Configure, test, and tune PLC-based machine control systems, including motion control, VFDs, and PID control. Review and approve engineering changes, drawings, specifications, and bills of material through the ECO/ECN process. Manage component obsolescence and evaluate new technologies to support current and future platforms. Lead root cause analysis and resolve complex technical issues for manufacturing, field service, technical support, sales, and customers. Work hands-on with the production floor and mechanical engineering team to support builds, prototypes, testing, and troubleshooting. Partner with the software engineering team on machine control requirements and integration. Conduct design reviews and support project planning, risk management, and schedule tracking across concurrent programs. Interface with suppliers and customers on complex technical matters and assist with quotes for custom projects. Establish engineering standards and best practices, and drive continuous improvement. Mentor and provide technical guidance to junior engineers. Requirements Bachelor's degree in Engineering (Electrical preferred). 5-7 years of experience designing electrical systems for complex industrial machinery or automated equipment. Relevant backgrounds include industrial automation, packaging machinery, conveyor systems, robotics, and machine builders. Experience with PLCs, motion control (servo and stepper), industrial networks, and machine control. Electrical schematic and control panel design, power distribution, and UL/IEC compliance. New product development experience, including design reviews and design for manufacturability. Sustaining engineering experience: root cause analysis, obsolescence management, and engineering change orders. Proficiency with AutoCAD and SolidWorks. Working knowledge of oscilloscopes, logic analyzers, and transformer and power supply sizing. Curious, hands-on, and comfortable serving as the go-to electrical expert on site. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
10/14/2026
Full time
Hybrid + Relocation Assistance + Own Full Machine Designs + 30% Growth + Promote-From-Within Culture This Jobot Job is hosted by: Dominique DeMarco Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $90,000 - $110,000 per year A bit about us: We're a division of a global, publicly traded industrial manufacturer with more than a century of history. Our division designs and builds capital equipment used to assemble printed circuit boards for automotive, medical, military, and consumer electronics manufacturers. We operate like a midsize company, with the stability, benefits, and resources of a large one. Demand is climbing with the growth of AI and advanced electronics, and we expect 30%+ growth this year. Our R&D is customer-driven: we go to our customers, learn what they need, and build it. Our team is tenured, turnover is low, and we promote from within. Why join us? Technical ownership: you own complete machine designs, from electrical architecture through production. A seat being elevated: this is a newly leveled senior role with the chance to shape standards and help build the team. High visibility: in a smaller engineering organization, your contributions are seen and matter. Variety: new product development and sustaining work across three product lines means few days look the same. Stability and growth: a long-established global leader in a growing market, with a promote-from-within culture. Strong benefits: PPO medical, dental, life and LTD insurance, 401(k) with a match that increases over time, paid parental leave, and generous tuition reimbursement. Balance: hybrid schedule and a culture known for strong work-life balance. Job Details Position Summary The Electrical Engineer III is the technical leader for electrical engineering at our site, guiding both new product development and sustaining engineering across three product lines. You define electrical system architecture, lead complex design efforts, and ensure our equipment meets performance, reliability, manufacturability, cost, and regulatory requirements. You serve as the primary electrical lead on customer-driven development projects and work closely with Mechanical Engineering, Software Engineering, Product Management, Manufacturing, Quality, Supply Chain, and global engineering teams to take products from concept through production. Key Responsibilities Define and own electrical system architecture for new and existing equipment platforms. Design, develop, modify, test, and evaluate electrical and electromechanical systems, including control panels, power distribution, and circuitry. Develop electrical designs and schematics, select components, and complete electrical documentation from concept through product launch. Lead customer-driven development projects: gather requirements, evaluate feature requests, and translate customer needs into technical solutions. Configure, test, and tune PLC-based machine control systems, including motion control, VFDs, and PID control. Review and approve engineering changes, drawings, specifications, and bills of material through the ECO/ECN process. Manage component obsolescence and evaluate new technologies to support current and future platforms. Lead root cause analysis and resolve complex technical issues for manufacturing, field service, technical support, sales, and customers. Work hands-on with the production floor and mechanical engineering team to support builds, prototypes, testing, and troubleshooting. Partner with the software engineering team on machine control requirements and integration. Conduct design reviews and support project planning, risk management, and schedule tracking across concurrent programs. Interface with suppliers and customers on complex technical matters and assist with quotes for custom projects. Establish engineering standards and best practices, and drive continuous improvement. Mentor and provide technical guidance to junior engineers. Requirements Bachelor's degree in Engineering (Electrical preferred). 5-7 years of experience designing electrical systems for complex industrial machinery or automated equipment. Relevant backgrounds include industrial automation, packaging machinery, conveyor systems, robotics, and machine builders. Experience with PLCs, motion control (servo and stepper), industrial networks, and machine control. Electrical schematic and control panel design, power distribution, and UL/IEC compliance. New product development experience, including design reviews and design for manufacturability. Sustaining engineering experience: root cause analysis, obsolescence management, and engineering change orders. Proficiency with AutoCAD and SolidWorks. Working knowledge of oscilloscopes, logic analyzers, and transformer and power supply sizing. Curious, hands-on, and comfortable serving as the go-to electrical expert on site. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Amazon is looking for a detail-oriented individual to join our Data Center Engineering Operations Team. This committed group works to maintain the critical physical infrastructure that supports Amazon Web Services. Specifically, this team works to ensure that the data center's MEP operates at 100% availability while maintaining first-class customer service to the teams and groups within the data centers. The Data Center Chief Engineer (CE) is responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center is operating at peak efficiency. This involves both planned preventative maintenance of equipment, daily corrective work, and emergency response to emergent issues. The CE serves as an expert technical resource reporting to a site's Data Center Facility Manager and interacting with onsite Engineering Operations Technicians (EOT) and any third party vendors. They are expected to be a singular focal point for all facility operations within a given data center and to support Amazon within its owned and operated data centers. Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime. Also expected from the CE is the ability to manage small-to-medium impacting projects from conception to completion. These projects involve large amounts of independent work as well as collaboration with external support groups including engineering, automation, processing, and finance in both local and global settings. The CE will be tasked with creating and delivering on key milestones, obtaining and tracking quotes for all necessary costs, and documenting project results for future implementation at other facilities. The goals of such projects are for the CE to drive innovation and resiliency while reducing operational costs in the facilities. The CE directs, trains and supports EOT's in their role of providing hands-on electrical and mechanical equipment troubleshooting and operations. Implementation and execution of site/equipment-specific training exercises is also expected. This equipment includes, but is not limited to, stand-by diesel generators, switchgear, UPS's, PDU's, AHU's, chillers, cooling towers, chemical treatment systems, pumps, motors, VFD's, and building automation systems. This technical leadership position brings a 24/7 presence to support the engineering operations technicians on site and to be available to respond to site specific needs This position requires that the candidate selected be a US citizen and currently possess and maintain an active Top Secret security clearance with SCI eligibility. Key job responsibilities • Oversee the day-to-day operations and maintenance of mechanical and electrical equipment in a data center. • Operate independently with limited direct management • Act as an escalation point for all facilities-related issues within the data center, escalating to the Data Center Facility Manager as needed, and work OT hours as needed to support site stability. • Perform root cause analysis of equipment failures • Troubleshoot and report of facility and data sever-level events within internal SLA • Create and deploy new standard practices for Engineering Operations Technicians, Chief Engineers, and vendor support teams • Provide training and guidance to Engineering Operations Technicians • Ensure all safety procedures are adhered to by vendor and Amazon staff • Utilize internal CMMS to manage building workflows • Communicate complex technical information to a non-technical audience Physical Requirements: • Walk job sites in uneven terrain • Work at heights and from ladders • Regularly lift and/or move up to 49 pounds; and participate in group lifts for 50 pounds or more • Coordinate body movements when using tools or equipment • Reach and stretch to position equipment and fixtures while maintaining balance • Bend or twist the body into unusual positions while working • Perform physical tasks all day without becoming overly tired • Use hands to manipulate small wires and objects • Push or pull heavy objects into position • Work in a noisy environment • Work at depths, such as under raised floors About the team AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - 3+ years of vendor management experience - 4+ years of relevant work in a data center or other critical environment experience - Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field - Experience with Microsoft Office including Outlook, Word, and Excel - Current, active TS/SCI US Government Security Clearance PREFERRED QUALIFICATIONS - 3+ years of construction or project management experience - Electrical or mechanical Journeyman License - operating engineering license such as DC II, DC III, or equivalent - Experience in construction or project management Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, OH, Plain City - 96 300.00 USD annually
10/13/2026
Full time
Amazon is looking for a detail-oriented individual to join our Data Center Engineering Operations Team. This committed group works to maintain the critical physical infrastructure that supports Amazon Web Services. Specifically, this team works to ensure that the data center's MEP operates at 100% availability while maintaining first-class customer service to the teams and groups within the data centers. The Data Center Chief Engineer (CE) is responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center is operating at peak efficiency. This involves both planned preventative maintenance of equipment, daily corrective work, and emergency response to emergent issues. The CE serves as an expert technical resource reporting to a site's Data Center Facility Manager and interacting with onsite Engineering Operations Technicians (EOT) and any third party vendors. They are expected to be a singular focal point for all facility operations within a given data center and to support Amazon within its owned and operated data centers. Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime. Also expected from the CE is the ability to manage small-to-medium impacting projects from conception to completion. These projects involve large amounts of independent work as well as collaboration with external support groups including engineering, automation, processing, and finance in both local and global settings. The CE will be tasked with creating and delivering on key milestones, obtaining and tracking quotes for all necessary costs, and documenting project results for future implementation at other facilities. The goals of such projects are for the CE to drive innovation and resiliency while reducing operational costs in the facilities. The CE directs, trains and supports EOT's in their role of providing hands-on electrical and mechanical equipment troubleshooting and operations. Implementation and execution of site/equipment-specific training exercises is also expected. This equipment includes, but is not limited to, stand-by diesel generators, switchgear, UPS's, PDU's, AHU's, chillers, cooling towers, chemical treatment systems, pumps, motors, VFD's, and building automation systems. This technical leadership position brings a 24/7 presence to support the engineering operations technicians on site and to be available to respond to site specific needs This position requires that the candidate selected be a US citizen and currently possess and maintain an active Top Secret security clearance with SCI eligibility. Key job responsibilities • Oversee the day-to-day operations and maintenance of mechanical and electrical equipment in a data center. • Operate independently with limited direct management • Act as an escalation point for all facilities-related issues within the data center, escalating to the Data Center Facility Manager as needed, and work OT hours as needed to support site stability. • Perform root cause analysis of equipment failures • Troubleshoot and report of facility and data sever-level events within internal SLA • Create and deploy new standard practices for Engineering Operations Technicians, Chief Engineers, and vendor support teams • Provide training and guidance to Engineering Operations Technicians • Ensure all safety procedures are adhered to by vendor and Amazon staff • Utilize internal CMMS to manage building workflows • Communicate complex technical information to a non-technical audience Physical Requirements: • Walk job sites in uneven terrain • Work at heights and from ladders • Regularly lift and/or move up to 49 pounds; and participate in group lifts for 50 pounds or more • Coordinate body movements when using tools or equipment • Reach and stretch to position equipment and fixtures while maintaining balance • Bend or twist the body into unusual positions while working • Perform physical tasks all day without becoming overly tired • Use hands to manipulate small wires and objects • Push or pull heavy objects into position • Work in a noisy environment • Work at depths, such as under raised floors About the team AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - 3+ years of vendor management experience - 4+ years of relevant work in a data center or other critical environment experience - Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field - Experience with Microsoft Office including Outlook, Word, and Excel - Current, active TS/SCI US Government Security Clearance PREFERRED QUALIFICATIONS - 3+ years of construction or project management experience - Electrical or mechanical Journeyman License - operating engineering license such as DC II, DC III, or equivalent - Experience in construction or project management Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, OH, Plain City - 96 300.00 USD annually
About the Role: As a Fleet Mechanic with MYR Group, you'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group Inc. (MYR Group) is a publicly traded holding company of specialty electrical construction companies. MYR Group subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our rich history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most complex projects, including new construction, upgrades, maintenance and repair for transmission, distribution and substation facilities, commercial and industrial electrical construction, emergency and storm restoration, clean energy, pre-construction services, and engineer-procure-construct (EPC) methods of project delivery. Essential Functions Performs mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations. Perform a full range of servicing and repairs on various types of equipment, including malfunctioning parts and systems, in compliance with manufacturer guidelines and company schedules. Mentor and provide oversight for less experienced mechanics. Performs routine and preventive maintenance, inspections, and repairs. Identifies mechanical problems either visually or with computer diagnostic equipment. Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed. Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate. Conduct safety inspections of equipment and prepare safety documentation. Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required. Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements. Regular and predictable attendance Other duties as assigned Essential functions of this position are to be performed at a Company-designed office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Fleet Mechanic I Must have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair OR have one year of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Fleet Mechanic II Must have three years of experience in general heavy truck repair, automotive repair, or equipment repair OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have two years of experience; equivalent trade school/technical school time may be applied toward this requirement. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Fleet Mechanic III Must have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience OR five years of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Experience using mechanical tools, materials, and testing equipment Working knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Physical Requirements Reaching (including above your head); bending, climbing, pushing, pulling, twisting, squatting and kneeling to perform repairs and inspections Lifting - medium level work - exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects Must be able to routinely perform work both indoors in climate-controlled shared work area with moderate to loud noise level, outside in sometimes inclement weather, or potentially difficult/hazardous conditions May be subject to hazards including variety of physical conditions, such as proximity to moving mechanical parts and moving vehicles May be subject to vibration, such as oscillating movements of extremities or entire body What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Tool/boot allowance ($250 per quarter). Comprehensive benefits package - Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: LinkedIn Recruiter Assignment (your initials): LinkedIn Workplace:
10/13/2026
Full time
About the Role: As a Fleet Mechanic with MYR Group, you'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group Inc. (MYR Group) is a publicly traded holding company of specialty electrical construction companies. MYR Group subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our rich history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most complex projects, including new construction, upgrades, maintenance and repair for transmission, distribution and substation facilities, commercial and industrial electrical construction, emergency and storm restoration, clean energy, pre-construction services, and engineer-procure-construct (EPC) methods of project delivery. Essential Functions Performs mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations. Perform a full range of servicing and repairs on various types of equipment, including malfunctioning parts and systems, in compliance with manufacturer guidelines and company schedules. Mentor and provide oversight for less experienced mechanics. Performs routine and preventive maintenance, inspections, and repairs. Identifies mechanical problems either visually or with computer diagnostic equipment. Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed. Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate. Conduct safety inspections of equipment and prepare safety documentation. Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required. Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements. Regular and predictable attendance Other duties as assigned Essential functions of this position are to be performed at a Company-designed office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Fleet Mechanic I Must have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair OR have one year of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Fleet Mechanic II Must have three years of experience in general heavy truck repair, automotive repair, or equipment repair OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have two years of experience; equivalent trade school/technical school time may be applied toward this requirement. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Fleet Mechanic III Must have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience OR five years of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Experience using mechanical tools, materials, and testing equipment Working knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Physical Requirements Reaching (including above your head); bending, climbing, pushing, pulling, twisting, squatting and kneeling to perform repairs and inspections Lifting - medium level work - exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects Must be able to routinely perform work both indoors in climate-controlled shared work area with moderate to loud noise level, outside in sometimes inclement weather, or potentially difficult/hazardous conditions May be subject to hazards including variety of physical conditions, such as proximity to moving mechanical parts and moving vehicles May be subject to vibration, such as oscillating movements of extremities or entire body What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Tool/boot allowance ($250 per quarter). Comprehensive benefits package - Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: LinkedIn Recruiter Assignment (your initials): LinkedIn Workplace:
The City of Spring Hill Kansas
Spring Hill, Kansas
Section I: Brief Summary of the Job Under the supervision of the City Engineer, the Construction Inspector is a non-exempt position under FLSA. The Construction Inspector oversees grading operations; conducts construction inspections of sidewalks, streets, curbs, storm sewer, sanitary sewer, water mains, and other public infrastructure to ensure compliance with city ordinances, construction plans and specifications; participates in the review of engineering construction plans; acts as a liaison between contractors, city staff, and citizens; assists with emergency operations, including snow removal operations, as required. The City Inspector must have the ability to multi-task and perform job functions with evolving priorities as well as establish and maintain effective internal and external working relationships. Section II: Essential Duties of the Job Coordinates with the City Engineer to review project plans and contract documents ensuring conformance with city specifications, standards, and policies Attends pre-construction conference meetings to discuss proper construction methods and materials testing requirements for each project Reviews shop drawing submittals for construction materials and verifies accuracy of "as-built" plans Inspect and monitor items related to site grading, storm sewers, sanitary sewers, water mains, street construction, and other routine construction activities, ensuring conformance with city specifications, standards, and policies Observe necessary testing for streets, storm sewers, sanitary sewers, and water mains, including subgrade, concrete and asphalt tests Performs curb, sidewalk, and driveway inspections on residential and commercial properties prior to certificate of occupancy Actively manage assigned projects from a field perspective Measure and track completed quantities, review pay estimate submittals, provide input on change order items, and prepare project closeout documents Maintains records of work performed, such as inspections and complaints Performs enforcement actions as necessary which may include rejection of non-compliant material and/or construction methods as well as enforcement of the right-of-way ordinance Reviews all change order and payment requests from contractors Reads and understands field notes, engineering sketches, construction drawings, and technical specifications. Communicates verbally and in writing with citizens, contractors, consultants, employees, and other departments Performs routine clerical work including the maintenance of appropriate records and preparation of letters, construction notices, and construction documents Handles stressful situations in a professional manner Assist with emergency operations, including snow removal operations, as required Performs other duties as assigned or deemed necessary Duties, responsibilities, scheduling, shift assignments and work location, may be added, deleted or changed at any time at the discretion of management, formally or informally, either verbally or in writing. Section III: Education, Formal Training and/or Certifications High school diploma or equivalent required College level coursework in engineering, construction management, or related field desired Professional construction-related certifications preferred Valid driver's license required; commercial driver's license (CDL) preferred Section IV: Experience Minimum 5 years (Construction Inspector II) and minimum 7 years (Construction Inspector III) of increasingly responsible inspection experience on civil engineering related projects required Working knowledge of KDOT project requirements preferred Experience in all types of municipal construction procedures preferred Section V: Special Knowledge, Skills and Abilities Possess basic math skills. Ability to read and understand technical specifications, laws, and codes as they relate to capital improvement projects. Knowledge of modern public works practices, materials, methods, and safety hazards, as well as contract administration procedures and material testing and sampling procedures. Skill in computer applications such as word processing, accounting spreadsheets, scheduling, etc. used in construction and construction management. Ability to establish and maintain effective working relationships and use good judgment, initiative, and resourcefulness with the public, employees, and other City officials. Ability to work independently. Technical Skills: This employee must be able to operate computers, photocopiers and other office equipment. This employee should possess strong analytical, research, public relation, organizational, oral and written communication skills. Ability to safely operate a City vehicle and other equipment to perform job duties. Intellectual Aptitude: Ability to read and comprehend city, state and federal regulations. Ability to work on several projects at once and to recognize and protect confidential information. Ability to understand and interpret blueprints, schematic drawings, and layouts to ensure compliance with specifications and other requirements. Problem Solving: Problem solving is a factor in this position. Decision Making: Makes decisions related to project inspections and performing daily duties in a safe and efficient manner. Supervision: This employee works with supervision from the City Engineer. Financial Accountability: This employee is responsible for the safe operation of department equipment, may have limited authority to purchase necessary department supplies but does not participate in the annual budget process. Personal Relations: Daily contact with the general public, co-workers, contractors, consultants and Directors. Occasional contact with the Governing Body may be expected. Section VI: Physical, Environmental, and Special Working Conditions Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to be attentive for extended periods of time while needing to stand; walk; sit; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl; talk or hear; or smell. The employee may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus. Ability to travel and tour City projects in adverse conditions to include but not limited to construction sites, outdoor sites, remote sites, etc. Ability to climb down inlets and crawl through pipes during inspection of storm sewers. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to toxic or caustic chemicals and frequently outside weather conditions. The employee may be exposed to moving mechanical parts; high precarious places; fumes or airborne particles; risk of electrical shock; and explosives. The noise level in the work environment is moderate to excessive. Work in confined spaces. PIb95f0297c49c-2122
10/12/2026
Full time
Section I: Brief Summary of the Job Under the supervision of the City Engineer, the Construction Inspector is a non-exempt position under FLSA. The Construction Inspector oversees grading operations; conducts construction inspections of sidewalks, streets, curbs, storm sewer, sanitary sewer, water mains, and other public infrastructure to ensure compliance with city ordinances, construction plans and specifications; participates in the review of engineering construction plans; acts as a liaison between contractors, city staff, and citizens; assists with emergency operations, including snow removal operations, as required. The City Inspector must have the ability to multi-task and perform job functions with evolving priorities as well as establish and maintain effective internal and external working relationships. Section II: Essential Duties of the Job Coordinates with the City Engineer to review project plans and contract documents ensuring conformance with city specifications, standards, and policies Attends pre-construction conference meetings to discuss proper construction methods and materials testing requirements for each project Reviews shop drawing submittals for construction materials and verifies accuracy of "as-built" plans Inspect and monitor items related to site grading, storm sewers, sanitary sewers, water mains, street construction, and other routine construction activities, ensuring conformance with city specifications, standards, and policies Observe necessary testing for streets, storm sewers, sanitary sewers, and water mains, including subgrade, concrete and asphalt tests Performs curb, sidewalk, and driveway inspections on residential and commercial properties prior to certificate of occupancy Actively manage assigned projects from a field perspective Measure and track completed quantities, review pay estimate submittals, provide input on change order items, and prepare project closeout documents Maintains records of work performed, such as inspections and complaints Performs enforcement actions as necessary which may include rejection of non-compliant material and/or construction methods as well as enforcement of the right-of-way ordinance Reviews all change order and payment requests from contractors Reads and understands field notes, engineering sketches, construction drawings, and technical specifications. Communicates verbally and in writing with citizens, contractors, consultants, employees, and other departments Performs routine clerical work including the maintenance of appropriate records and preparation of letters, construction notices, and construction documents Handles stressful situations in a professional manner Assist with emergency operations, including snow removal operations, as required Performs other duties as assigned or deemed necessary Duties, responsibilities, scheduling, shift assignments and work location, may be added, deleted or changed at any time at the discretion of management, formally or informally, either verbally or in writing. Section III: Education, Formal Training and/or Certifications High school diploma or equivalent required College level coursework in engineering, construction management, or related field desired Professional construction-related certifications preferred Valid driver's license required; commercial driver's license (CDL) preferred Section IV: Experience Minimum 5 years (Construction Inspector II) and minimum 7 years (Construction Inspector III) of increasingly responsible inspection experience on civil engineering related projects required Working knowledge of KDOT project requirements preferred Experience in all types of municipal construction procedures preferred Section V: Special Knowledge, Skills and Abilities Possess basic math skills. Ability to read and understand technical specifications, laws, and codes as they relate to capital improvement projects. Knowledge of modern public works practices, materials, methods, and safety hazards, as well as contract administration procedures and material testing and sampling procedures. Skill in computer applications such as word processing, accounting spreadsheets, scheduling, etc. used in construction and construction management. Ability to establish and maintain effective working relationships and use good judgment, initiative, and resourcefulness with the public, employees, and other City officials. Ability to work independently. Technical Skills: This employee must be able to operate computers, photocopiers and other office equipment. This employee should possess strong analytical, research, public relation, organizational, oral and written communication skills. Ability to safely operate a City vehicle and other equipment to perform job duties. Intellectual Aptitude: Ability to read and comprehend city, state and federal regulations. Ability to work on several projects at once and to recognize and protect confidential information. Ability to understand and interpret blueprints, schematic drawings, and layouts to ensure compliance with specifications and other requirements. Problem Solving: Problem solving is a factor in this position. Decision Making: Makes decisions related to project inspections and performing daily duties in a safe and efficient manner. Supervision: This employee works with supervision from the City Engineer. Financial Accountability: This employee is responsible for the safe operation of department equipment, may have limited authority to purchase necessary department supplies but does not participate in the annual budget process. Personal Relations: Daily contact with the general public, co-workers, contractors, consultants and Directors. Occasional contact with the Governing Body may be expected. Section VI: Physical, Environmental, and Special Working Conditions Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to be attentive for extended periods of time while needing to stand; walk; sit; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl; talk or hear; or smell. The employee may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus. Ability to travel and tour City projects in adverse conditions to include but not limited to construction sites, outdoor sites, remote sites, etc. Ability to climb down inlets and crawl through pipes during inspection of storm sewers. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to toxic or caustic chemicals and frequently outside weather conditions. The employee may be exposed to moving mechanical parts; high precarious places; fumes or airborne particles; risk of electrical shock; and explosives. The noise level in the work environment is moderate to excessive. Work in confined spaces. PIb95f0297c49c-2122
Our client is seeking a Project Engineer III to mentor junior engineers and CAD designers in General/Physical Layout and Protection & Control packages for renewables and substation design projects. This role will act as the sealing engineer for most team deliverables, manage customer relations, and support business development with select clients. Job Responsibilities Provide technical mentorship to junior engineers and CAD designers. - Act as the sealing engineer for project deliverables. - Lead engineering efforts substation design and utility interconnections, including physical layout, protection/control/SCADA design, relay settings, field support, commissioning, and relay testing. - Perform and oversee engineering calculations, project design, and drawing reviews to ensure quality and accuracy. - Prepare and review project documents, including specifications and bid packages. - Serve as the primary point of contact for clients, ensuring project alignment and customer satisfaction Job Requirements Bachelor"s degree in Electrical Engineering. - 4-9 years of experience in substation or renewable energy engineering. - Professional Engineer (PE) license required. - Strong understanding of protection and control design, relay settings, and commissioning. - Experience managing multiple projects and collaborating with cross-functional teams. - Proficiency with industry-standard engineering software and Microsoft Office tools. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at
10/12/2026
Full time
Our client is seeking a Project Engineer III to mentor junior engineers and CAD designers in General/Physical Layout and Protection & Control packages for renewables and substation design projects. This role will act as the sealing engineer for most team deliverables, manage customer relations, and support business development with select clients. Job Responsibilities Provide technical mentorship to junior engineers and CAD designers. - Act as the sealing engineer for project deliverables. - Lead engineering efforts substation design and utility interconnections, including physical layout, protection/control/SCADA design, relay settings, field support, commissioning, and relay testing. - Perform and oversee engineering calculations, project design, and drawing reviews to ensure quality and accuracy. - Prepare and review project documents, including specifications and bid packages. - Serve as the primary point of contact for clients, ensuring project alignment and customer satisfaction Job Requirements Bachelor"s degree in Electrical Engineering. - 4-9 years of experience in substation or renewable energy engineering. - Professional Engineer (PE) license required. - Strong understanding of protection and control design, relay settings, and commissioning. - Experience managing multiple projects and collaborating with cross-functional teams. - Proficiency with industry-standard engineering software and Microsoft Office tools. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at
Job Description Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a detailed-oriented, dependable Laboratory Technician I, II, or III to join our Consultants team in the Sulphur, LA area. The Laboratory Technician will be responsible for sampling, processing, and testing materials in accordance with established procedures and specifications, including proper documentation of testing results. These methods include American Society for Testing & Materials (ASTM), American Association of State Highway & Transportation Officials (AASHTO), Department of Transportation (DOT), US Corp of Engineers, etc. Other responsibilities include: Perform physical/index/chemical construction material laboratory testing, as assigned: Concrete/Concrete Masonry Unit (CMU) Testing (concrete cylinder/cmu/core prep and compressing, specialty concrete testing, etc.) Hot Mix Asphalt (HMA) testing (gradations, AC content, density, etc.) Soils (roadway base, select fills, subgrade, etc.), testing (moisture/density, Atterberg Limits, gradations, specialty, strength, etc.) Aggregate testing (gradation, specific gravity, unit weight, etc.) Properly document hours worked and assist in client billing efforts. Perform and keep documentation of routine maintenance and calibration of equipment. Maintain a neat/clean/safe laboratory and work space. Maintain relevant certifications to also include regular review of pertinent testing methods. Meet deadlines and priorities according to established procedures. Demonstrate the safe usage, storage, and maintenance of all tools and equipment, including company vehicle. Maintain effective working relationships with internal and external personnel. Understand, adhere, and participate in the Raba Kistner Health & Safety and BBS Programs, setting a good example of our safety standards. Perform other duties as assigned. Qualifications Shall possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Laboratory Technician in Training: High School Diploma or GED required. No experience necessary Laboratory Technician I: At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Laboratory Technician II: At least 1 year of applicable experience in the materials testing and inspection industry and possess at least 3 or more industry certifications Laboratory Technician III: At least 3 years of applicable experience in the materials testing and inspection industry and possess 5 or more industry certifications Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly required to sit, stand, walk, climb, balance, stoop, kneel, crouch, stop, and talk. Regularly required to lift and/or move up to 70 pounds (with or without assistance from others) to include, but not limited to, sample containers and equipment. Daily required to use hands and reach. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines, tools, and equipment; must also possess the dexterity to utilize delicate and small laboratory equipment. The noise level in the work environment is usually loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace
10/10/2026
Full time
Job Description Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a detailed-oriented, dependable Laboratory Technician I, II, or III to join our Consultants team in the Sulphur, LA area. The Laboratory Technician will be responsible for sampling, processing, and testing materials in accordance with established procedures and specifications, including proper documentation of testing results. These methods include American Society for Testing & Materials (ASTM), American Association of State Highway & Transportation Officials (AASHTO), Department of Transportation (DOT), US Corp of Engineers, etc. Other responsibilities include: Perform physical/index/chemical construction material laboratory testing, as assigned: Concrete/Concrete Masonry Unit (CMU) Testing (concrete cylinder/cmu/core prep and compressing, specialty concrete testing, etc.) Hot Mix Asphalt (HMA) testing (gradations, AC content, density, etc.) Soils (roadway base, select fills, subgrade, etc.), testing (moisture/density, Atterberg Limits, gradations, specialty, strength, etc.) Aggregate testing (gradation, specific gravity, unit weight, etc.) Properly document hours worked and assist in client billing efforts. Perform and keep documentation of routine maintenance and calibration of equipment. Maintain a neat/clean/safe laboratory and work space. Maintain relevant certifications to also include regular review of pertinent testing methods. Meet deadlines and priorities according to established procedures. Demonstrate the safe usage, storage, and maintenance of all tools and equipment, including company vehicle. Maintain effective working relationships with internal and external personnel. Understand, adhere, and participate in the Raba Kistner Health & Safety and BBS Programs, setting a good example of our safety standards. Perform other duties as assigned. Qualifications Shall possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Laboratory Technician in Training: High School Diploma or GED required. No experience necessary Laboratory Technician I: At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Laboratory Technician II: At least 1 year of applicable experience in the materials testing and inspection industry and possess at least 3 or more industry certifications Laboratory Technician III: At least 3 years of applicable experience in the materials testing and inspection industry and possess 5 or more industry certifications Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly required to sit, stand, walk, climb, balance, stoop, kneel, crouch, stop, and talk. Regularly required to lift and/or move up to 70 pounds (with or without assistance from others) to include, but not limited to, sample containers and equipment. Daily required to use hands and reach. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines, tools, and equipment; must also possess the dexterity to utilize delicate and small laboratory equipment. The noise level in the work environment is usually loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace
Job Description Job Description A New Paradigm For Space Operations. Who We Are: Space Kinetic is a dual use space technology startup building a completely new architecture for space operations - one that brings the advantages of proliferated drone technology (low-cost, operationally flexible, attainable, distributed) to space missions while reducing the ecosystem's reliance on consumable fuel. In a world where many companies are focused on incrementally improving the status quo, we are focused on creating something entirely different - an architecture underpinned by new first principles to meet the opportunities and challenges of the third space age head-on. Our goal is to move away from one-to-one space architectures - where each satellite in a constellation has one (or a small # of) primary payloads attached to the bus and unlock a 'one-to-many' system, where each satellite has a large number of payloads which can be deployed from their host spacecraft at high velocities without firing a thruster. This is not a role for someone looking for a traditional 40-hour work week. Space Kinetic is building ambitious, first-of-its-kind technology, and that requires urgency, ownership, and a high level of commitment to changing the foundational assumptions for everything we do in space. What You'll Do: The Principal Guidance, Navigation, and Control (GNC) Engineer will lead the development of an entirely new GNC architecture for Space Kinetic's first-of-its-kind spacecraft platform. You will own the GNC subsystem across its full lifecycle, from early concept development and algorithm design through simulation, hardware integration, verification, and mission operations. You will lead a cross-functional GNC team and collaborate with flight software, systems engineering, test, leadership, and external partners to deliver an integrated hardware and software solution. Job Responsibilities: Lead the GNC team and own the subsystem architecture, development schedule, requirements, interfaces, and technical milestones. Design and implement GNC algorithms for flight software and support their integration into the spacecraft platform. Lead GNC hardware trade studies, component selection, and the integration of internally and externally developed hardware and software. Conduct design analyses, Monte Carlo simulations, and hardware-in-the-loop testing to evaluate and validate system performance. Own subsystem verification and validation activities across simulation, testbed, and flight environments. Develop or contribute to ground tools used for mission and constellation management. Partner with subcontractors, internal teams, and senior leadership while supporting internal and external design reviews. What It Takes: Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or a related technical field. 7+ years of experience developing spacecraft GNC systems. Experience supporting spacecraft or satellite development and operations across the full project lifecycle. Experience developing GNC algorithms, conducting simulations, and performing hardware-in-the-loop testing. Ability to work cross-functionally across spacecraft subsystems and interface directly with commercial or government aerospace customers. Ability to obtain and maintain a U.S. Government security clearance. What We'd Love: Master's degree or PhD in Aerospace Engineering or a related field. Experience with flight software frameworks such as NASA cFS, F', or custom architectures. Familiarity with model-based systems engineering and interface control documentation. Where You'll Be: The position is onsite at our headquarters in El Segundo, CA. Domestic travel may be required (up to 20% of the year). What We Offer: Equity-Based Compensation 401(k) retirement plan with a 3.5% company match Highly Competitive PTO Paid company holidays + winter break Comprehensive medical, dental, and vision insurance Unique Performance-based bonus opportunities ITAR Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range $195,000-$250,000 USD
10/10/2026
Full time
Job Description Job Description A New Paradigm For Space Operations. Who We Are: Space Kinetic is a dual use space technology startup building a completely new architecture for space operations - one that brings the advantages of proliferated drone technology (low-cost, operationally flexible, attainable, distributed) to space missions while reducing the ecosystem's reliance on consumable fuel. In a world where many companies are focused on incrementally improving the status quo, we are focused on creating something entirely different - an architecture underpinned by new first principles to meet the opportunities and challenges of the third space age head-on. Our goal is to move away from one-to-one space architectures - where each satellite in a constellation has one (or a small # of) primary payloads attached to the bus and unlock a 'one-to-many' system, where each satellite has a large number of payloads which can be deployed from their host spacecraft at high velocities without firing a thruster. This is not a role for someone looking for a traditional 40-hour work week. Space Kinetic is building ambitious, first-of-its-kind technology, and that requires urgency, ownership, and a high level of commitment to changing the foundational assumptions for everything we do in space. What You'll Do: The Principal Guidance, Navigation, and Control (GNC) Engineer will lead the development of an entirely new GNC architecture for Space Kinetic's first-of-its-kind spacecraft platform. You will own the GNC subsystem across its full lifecycle, from early concept development and algorithm design through simulation, hardware integration, verification, and mission operations. You will lead a cross-functional GNC team and collaborate with flight software, systems engineering, test, leadership, and external partners to deliver an integrated hardware and software solution. Job Responsibilities: Lead the GNC team and own the subsystem architecture, development schedule, requirements, interfaces, and technical milestones. Design and implement GNC algorithms for flight software and support their integration into the spacecraft platform. Lead GNC hardware trade studies, component selection, and the integration of internally and externally developed hardware and software. Conduct design analyses, Monte Carlo simulations, and hardware-in-the-loop testing to evaluate and validate system performance. Own subsystem verification and validation activities across simulation, testbed, and flight environments. Develop or contribute to ground tools used for mission and constellation management. Partner with subcontractors, internal teams, and senior leadership while supporting internal and external design reviews. What It Takes: Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or a related technical field. 7+ years of experience developing spacecraft GNC systems. Experience supporting spacecraft or satellite development and operations across the full project lifecycle. Experience developing GNC algorithms, conducting simulations, and performing hardware-in-the-loop testing. Ability to work cross-functionally across spacecraft subsystems and interface directly with commercial or government aerospace customers. Ability to obtain and maintain a U.S. Government security clearance. What We'd Love: Master's degree or PhD in Aerospace Engineering or a related field. Experience with flight software frameworks such as NASA cFS, F', or custom architectures. Familiarity with model-based systems engineering and interface control documentation. Where You'll Be: The position is onsite at our headquarters in El Segundo, CA. Domestic travel may be required (up to 20% of the year). What We Offer: Equity-Based Compensation 401(k) retirement plan with a 3.5% company match Highly Competitive PTO Paid company holidays + winter break Comprehensive medical, dental, and vision insurance Unique Performance-based bonus opportunities ITAR Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range $195,000-$250,000 USD
$90,000-$140,000 DOE First Shift Onsite Monday-Friday Huntington Beach, CA 92647 Immediate Hire This Jobot Job is hosted by: Amanda Ahmad Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $90,000 - $140,000 per year A bit about us: Founded 75 years ago and based in Huntington Beach, California, with additional manufacturing operations in Mebane, North Carolina and an international presence, we are a family-owned American manufacturer of durable storage, transport, and operational solutions for the commercial foodservice industry. Our organization has grown from one California factory and a single product into a global business offering more than 17,000 products, while maintaining a strong focus on American manufacturing, food safety, quality, service, and continued innovation. Why join us? High-Priority Opening: The company is prepared to hire immediately and has committed to fast feedback and interview scheduling Established Manufacturer: Join a family-owned organization celebrating 75 years in business American Manufacturing: Work for a company with established manufacturing operations in California and North Carolina Technical Ownership: Lead automation initiatives from initial design through programming, validation, commissioning, and deployment Advanced Automation Environment: Work directly with PLCs, HMIs, industrial robots, motion-control systems, and custom automated equipment Visible Operational Impact: Improve equipment reliability, production efficiency, workplace safety, and manufacturing costs First-Shift Schedule: Onsite Monday-Friday Job Details Key Responsibilities and Duties Design, develop, program, and commission automated manufacturing equipment and industrial control systems. Program and troubleshoot PLC controllers and HMI units. Set up, program, and troubleshoot Star Automation and/or Yushin robots. Set up, program, and troubleshoot six-axis robotic systems. Develop and implement servo- and stepper-motor motion-control systems. Diagnose complex technical problems and nonstandard failures involving automated machinery and control systems. Minimize production downtime through effective electrical, pneumatic, controls, and automation troubleshooting. Lead automation projects from design through deployment, managing project scope, schedules, priorities, and deliverables. Develop validation protocols and ensure automation systems meet applicable safety, quality, and industry requirements. Analyze production processes and operating data to improve efficiency, equipment performance, and manufacturing costs. Create equipment designs and drawings using AutoCAD or SolidWorks. Apply GD&T standards to automated-equipment designs and technical documentation. Design electrical control circuits and prepare electrical schematics. Design, fabricate, assemble, and wire electrical control panels. Troubleshoot pneumatic and electro-pneumatic control circuits. Prepare technical reports, standard operating procedures, electrical documentation, presentations, and project schedules. Provide technical leadership and training to team members. Partner with production, engineering, maintenance, quality, safety, and other cross-functional departments. Coordinate with equipment suppliers and outside vendors on equipment design, procurement, installation, and commissioning. Follow applicable OSHA, NEC, NFPA, IBC, ISO, and internal safety and quality standards. Travel to company facilities and supplier locations within the United States and potentially internationally. Qualifications Needed Bachelor of Science degree in Mechanical Engineering, Manufacturing Engineering, Automation Engineering, Industrial Engineering, or a related discipline; equivalent verifiable experience and vocational automation training may be considered. Minimum 10 years of manufacturing engineering experience involving automation and robotics. Demonstrated experience leading automation projects from design and development through commissioning and production deployment. Ability to program and troubleshoot PLC controllers and HMI systems. Experience setting up, programming, and troubleshooting industrial robots, including six-axis robotics. Experience designing automated manufacturing equipment using AutoCAD or SolidWorks in a 2D or 3D environment. Strong background in electrical controls, including schematic development, circuit design, control-panel fabrication, wiring, and troubleshooting. Working knowledge of pneumatic and electro-pneumatic control systems. Experience implementing and programming servo- and stepper-motor systems. Knowledge of GD&T, including ANSI Y14.5-2018. Working knowledge of applicable industrial codes and standards, including OSHA, NEC, NFPA, IBC, ISO, and ADA requirements. Ability to analyze manufacturing data and apply advanced mathematics, geometry, and statistics when making engineering decisions. Proficiency with Microsoft Word, Excel, PowerPoint, and Project. Ability to travel to multiple facilities and suppliers domestically and potentially internationally. Authorization to work for any employer in the United States without sponsorship. Preferred Automation experience within a plastic injection molding environment. Extensive mechanical design and engineering experience. Experience with Star Automation and/or Yushin robots. Experience with SCADA systems and manufacturing databases. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
10/10/2026
Full time
$90,000-$140,000 DOE First Shift Onsite Monday-Friday Huntington Beach, CA 92647 Immediate Hire This Jobot Job is hosted by: Amanda Ahmad Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Salary: $90,000 - $140,000 per year A bit about us: Founded 75 years ago and based in Huntington Beach, California, with additional manufacturing operations in Mebane, North Carolina and an international presence, we are a family-owned American manufacturer of durable storage, transport, and operational solutions for the commercial foodservice industry. Our organization has grown from one California factory and a single product into a global business offering more than 17,000 products, while maintaining a strong focus on American manufacturing, food safety, quality, service, and continued innovation. Why join us? High-Priority Opening: The company is prepared to hire immediately and has committed to fast feedback and interview scheduling Established Manufacturer: Join a family-owned organization celebrating 75 years in business American Manufacturing: Work for a company with established manufacturing operations in California and North Carolina Technical Ownership: Lead automation initiatives from initial design through programming, validation, commissioning, and deployment Advanced Automation Environment: Work directly with PLCs, HMIs, industrial robots, motion-control systems, and custom automated equipment Visible Operational Impact: Improve equipment reliability, production efficiency, workplace safety, and manufacturing costs First-Shift Schedule: Onsite Monday-Friday Job Details Key Responsibilities and Duties Design, develop, program, and commission automated manufacturing equipment and industrial control systems. Program and troubleshoot PLC controllers and HMI units. Set up, program, and troubleshoot Star Automation and/or Yushin robots. Set up, program, and troubleshoot six-axis robotic systems. Develop and implement servo- and stepper-motor motion-control systems. Diagnose complex technical problems and nonstandard failures involving automated machinery and control systems. Minimize production downtime through effective electrical, pneumatic, controls, and automation troubleshooting. Lead automation projects from design through deployment, managing project scope, schedules, priorities, and deliverables. Develop validation protocols and ensure automation systems meet applicable safety, quality, and industry requirements. Analyze production processes and operating data to improve efficiency, equipment performance, and manufacturing costs. Create equipment designs and drawings using AutoCAD or SolidWorks. Apply GD&T standards to automated-equipment designs and technical documentation. Design electrical control circuits and prepare electrical schematics. Design, fabricate, assemble, and wire electrical control panels. Troubleshoot pneumatic and electro-pneumatic control circuits. Prepare technical reports, standard operating procedures, electrical documentation, presentations, and project schedules. Provide technical leadership and training to team members. Partner with production, engineering, maintenance, quality, safety, and other cross-functional departments. Coordinate with equipment suppliers and outside vendors on equipment design, procurement, installation, and commissioning. Follow applicable OSHA, NEC, NFPA, IBC, ISO, and internal safety and quality standards. Travel to company facilities and supplier locations within the United States and potentially internationally. Qualifications Needed Bachelor of Science degree in Mechanical Engineering, Manufacturing Engineering, Automation Engineering, Industrial Engineering, or a related discipline; equivalent verifiable experience and vocational automation training may be considered. Minimum 10 years of manufacturing engineering experience involving automation and robotics. Demonstrated experience leading automation projects from design and development through commissioning and production deployment. Ability to program and troubleshoot PLC controllers and HMI systems. Experience setting up, programming, and troubleshooting industrial robots, including six-axis robotics. Experience designing automated manufacturing equipment using AutoCAD or SolidWorks in a 2D or 3D environment. Strong background in electrical controls, including schematic development, circuit design, control-panel fabrication, wiring, and troubleshooting. Working knowledge of pneumatic and electro-pneumatic control systems. Experience implementing and programming servo- and stepper-motor systems. Knowledge of GD&T, including ANSI Y14.5-2018. Working knowledge of applicable industrial codes and standards, including OSHA, NEC, NFPA, IBC, ISO, and ADA requirements. Ability to analyze manufacturing data and apply advanced mathematics, geometry, and statistics when making engineering decisions. Proficiency with Microsoft Word, Excel, PowerPoint, and Project. Ability to travel to multiple facilities and suppliers domestically and potentially internationally. Authorization to work for any employer in the United States without sponsorship. Preferred Automation experience within a plastic injection molding environment. Extensive mechanical design and engineering experience. Experience with Star Automation and/or Yushin robots. Experience with SCADA systems and manufacturing databases. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Synerfac Technical Staffing
Raleigh, North Carolina
Our client is seeking a Project Engineer III to mentor junior engineers and CAD designers in General/Physical Layout and Protection & Control packages for renewables and substation design projects. This role will act as the sealing engineer for most team deliverables, manage customer relations, and support business development with select clients. Job Responsibilities Provide technical mentorship to junior engineers and CAD designers. - Act as the sealing engineer for project deliverables. - Lead engineering efforts substation design and utility interconnections, including physical layout, protection/control/SCADA design, relay settings, field support, commissioning, and relay testing. - Perform and oversee engineering calculations, project design, and drawing reviews to ensure quality and accuracy. - Prepare and review project documents, including specifications and bid packages. - Serve as the primary point of contact for clients, ensuring project alignment and customer satisfaction Job Requirements Bachelor"s degree in Electrical Engineering. - 4-9 years of experience in substation or renewable energy engineering. - Professional Engineer (PE) license required. - Strong understanding of protection and control design, relay settings, and commissioning. - Experience managing multiple projects and collaborating with cross-functional teams. - Proficiency with industry-standard engineering software and Microsoft Office tools.
10/10/2026
Full time
Our client is seeking a Project Engineer III to mentor junior engineers and CAD designers in General/Physical Layout and Protection & Control packages for renewables and substation design projects. This role will act as the sealing engineer for most team deliverables, manage customer relations, and support business development with select clients. Job Responsibilities Provide technical mentorship to junior engineers and CAD designers. - Act as the sealing engineer for project deliverables. - Lead engineering efforts substation design and utility interconnections, including physical layout, protection/control/SCADA design, relay settings, field support, commissioning, and relay testing. - Perform and oversee engineering calculations, project design, and drawing reviews to ensure quality and accuracy. - Prepare and review project documents, including specifications and bid packages. - Serve as the primary point of contact for clients, ensuring project alignment and customer satisfaction Job Requirements Bachelor"s degree in Electrical Engineering. - 4-9 years of experience in substation or renewable energy engineering. - Professional Engineer (PE) license required. - Strong understanding of protection and control design, relay settings, and commissioning. - Experience managing multiple projects and collaborating with cross-functional teams. - Proficiency with industry-standard engineering software and Microsoft Office tools.
Job Description Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a detailed-oriented, dependable Laboratory Technician I, II, or III to join our Consultants team in the Houston and La Porte, TX area. The Laboratory Technician will be responsible for sampling, processing, and testing materials in accordance with established procedures and specifications, including proper documentation of testing results. These methods include American Society for Testing & Materials (ASTM), American Association of State Highway & Transportation Officials (AASHTO), Department of Transportation (DOT), US Corp of Engineers, etc. Other responsibilities include: Perform physical/index/chemical construction material laboratory testing, as assigned: Concrete/Concrete Masonry Unit (CMU) Testing (concrete cylinder/cmu/core prep and compressing, specialty concrete testing, etc.) Hot Mix Asphalt (HMA) testing (gradations, AC content, density, etc.) Soils (roadway base, select fills, subgrade, etc.), testing (moisture/density, Atterberg Limits, gradations, specialty, strength, etc.) Aggregate testing (gradation, specific gravity, unit weight, etc.) Properly document hours worked and assist in client billing efforts. Perform and keep documentation of routine maintenance and calibration of equipment. Maintain a neat/clean/safe laboratory and work space. Maintain relevant certifications to also include regular review of pertinent testing methods. Meet deadlines and priorities according to established procedures. Demonstrate the safe usage, storage, and maintenance of all tools and equipment, including company vehicle. Maintain effective working relationships with internal and external personnel. Understand, adhere, and participate in the Raba Kistner Health & Safety and BBS Programs, setting a good example of our safety standards. Perform other duties as assigned. Qualifications Shall possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Laboratory Technician in Training: High School Diploma or GED required. No experience necessary Laboratory Technician I: At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly required to sit, stand, walk, climb, balance, stoop, kneel, crouch, stop, and talk. Regularly required to lift and/or move up to 70 pounds (with or without assistance from others) to include, but not limited to, sample containers and equipment. Daily required to use hands and reach. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines, tools, and equipment; must also possess the dexterity to utilize delicate and small laboratory equipment. The noise level in the work environment is usually loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace
10/06/2026
Full time
Job Description Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a detailed-oriented, dependable Laboratory Technician I, II, or III to join our Consultants team in the Houston and La Porte, TX area. The Laboratory Technician will be responsible for sampling, processing, and testing materials in accordance with established procedures and specifications, including proper documentation of testing results. These methods include American Society for Testing & Materials (ASTM), American Association of State Highway & Transportation Officials (AASHTO), Department of Transportation (DOT), US Corp of Engineers, etc. Other responsibilities include: Perform physical/index/chemical construction material laboratory testing, as assigned: Concrete/Concrete Masonry Unit (CMU) Testing (concrete cylinder/cmu/core prep and compressing, specialty concrete testing, etc.) Hot Mix Asphalt (HMA) testing (gradations, AC content, density, etc.) Soils (roadway base, select fills, subgrade, etc.), testing (moisture/density, Atterberg Limits, gradations, specialty, strength, etc.) Aggregate testing (gradation, specific gravity, unit weight, etc.) Properly document hours worked and assist in client billing efforts. Perform and keep documentation of routine maintenance and calibration of equipment. Maintain a neat/clean/safe laboratory and work space. Maintain relevant certifications to also include regular review of pertinent testing methods. Meet deadlines and priorities according to established procedures. Demonstrate the safe usage, storage, and maintenance of all tools and equipment, including company vehicle. Maintain effective working relationships with internal and external personnel. Understand, adhere, and participate in the Raba Kistner Health & Safety and BBS Programs, setting a good example of our safety standards. Perform other duties as assigned. Qualifications Shall possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Laboratory Technician in Training: High School Diploma or GED required. No experience necessary Laboratory Technician I: At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly required to sit, stand, walk, climb, balance, stoop, kneel, crouch, stop, and talk. Regularly required to lift and/or move up to 70 pounds (with or without assistance from others) to include, but not limited to, sample containers and equipment. Daily required to use hands and reach. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines, tools, and equipment; must also possess the dexterity to utilize delicate and small laboratory equipment. The noise level in the work environment is usually loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace
Job Description Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a detailed-oriented, dependable Laboratory Technician I, II, or III to join our Consultants team in the B eaumont , TX area. The Laboratory Technician will be responsible for sampling, processing, and testing materials in accordance with established procedures and specifications, including proper documentation of testing results. These methods include American Society for Testing & Materials (ASTM), American Association of State Highway & Transportation Officials (AASHTO), Department of Transportation (DOT), US Corp of Engineers, etc. Other responsibilities include: Perform physical/index/chemical construction material laboratory testing, as assigned: Concrete/Concrete Masonry Unit (CMU) Testing (concrete cylinder/cmu/core prep and compressing, specialty concrete testing, etc.) Hot Mix Asphalt (HMA) testing (gradations, AC content, density, etc.) Soils (roadway base, select fills, subgrade, etc.), testing (moisture/density, Atterberg Limits, gradations, specialty, strength, etc.) Aggregate testing (gradation, specific gravity, unit weight, etc.) Properly document hours worked and assist in client billing efforts. Perform and keep documentation of routine maintenance and calibration of equipment. Maintain a neat/clean/safe laboratory and work space. Maintain relevant certifications to also include regular review of pertinent testing methods. Meet deadlines and priorities according to established procedures. Demonstrate the safe usage, storage, and maintenance of all tools and equipment, including company vehicle. Maintain effective working relationships with internal and external personnel. Understand, adhere, and participate in the Raba Kistner Health & Safety and BBS Programs, setting a good example of our safety standards. Perform other duties as assigned. Qualifications Shall possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Laboratory Technician in Training: High School Diploma or GED required. No experience necessary Laboratory Technician I: At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Laboratory Technician II: At least 1 year of applicable experience in the materials testing and inspection industry and possess at least 3 or more industry certifications Laboratory Technician III: At least 3 years of applicable experience in the materials testing and inspection industry and possess 5 or more industry certifications Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly required to sit, stand, walk, climb, balance, stoop, kneel, crouch, stop, and talk. Regularly required to lift and/or move up to 70 pounds (with or without assistance from others) to include, but not limited to, sample containers and equipment. Daily required to use hands and reach. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines, tools, and equipment; must also possess the dexterity to utilize delicate and small laboratory equipment. The noise level in the work environment is usually loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace
10/06/2026
Full time
Job Description Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a detailed-oriented, dependable Laboratory Technician I, II, or III to join our Consultants team in the B eaumont , TX area. The Laboratory Technician will be responsible for sampling, processing, and testing materials in accordance with established procedures and specifications, including proper documentation of testing results. These methods include American Society for Testing & Materials (ASTM), American Association of State Highway & Transportation Officials (AASHTO), Department of Transportation (DOT), US Corp of Engineers, etc. Other responsibilities include: Perform physical/index/chemical construction material laboratory testing, as assigned: Concrete/Concrete Masonry Unit (CMU) Testing (concrete cylinder/cmu/core prep and compressing, specialty concrete testing, etc.) Hot Mix Asphalt (HMA) testing (gradations, AC content, density, etc.) Soils (roadway base, select fills, subgrade, etc.), testing (moisture/density, Atterberg Limits, gradations, specialty, strength, etc.) Aggregate testing (gradation, specific gravity, unit weight, etc.) Properly document hours worked and assist in client billing efforts. Perform and keep documentation of routine maintenance and calibration of equipment. Maintain a neat/clean/safe laboratory and work space. Maintain relevant certifications to also include regular review of pertinent testing methods. Meet deadlines and priorities according to established procedures. Demonstrate the safe usage, storage, and maintenance of all tools and equipment, including company vehicle. Maintain effective working relationships with internal and external personnel. Understand, adhere, and participate in the Raba Kistner Health & Safety and BBS Programs, setting a good example of our safety standards. Perform other duties as assigned. Qualifications Shall possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Laboratory Technician in Training: High School Diploma or GED required. No experience necessary Laboratory Technician I: At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Laboratory Technician II: At least 1 year of applicable experience in the materials testing and inspection industry and possess at least 3 or more industry certifications Laboratory Technician III: At least 3 years of applicable experience in the materials testing and inspection industry and possess 5 or more industry certifications Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly required to sit, stand, walk, climb, balance, stoop, kneel, crouch, stop, and talk. Regularly required to lift and/or move up to 70 pounds (with or without assistance from others) to include, but not limited to, sample containers and equipment. Daily required to use hands and reach. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines, tools, and equipment; must also possess the dexterity to utilize delicate and small laboratory equipment. The noise level in the work environment is usually loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace
Job Description Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a detailed-oriented, dependable Laboratory Technician I, II, or III to join our Consultants team in the Houston and La Porte, TX area. The Laboratory Technician will be responsible for sampling, processing, and testing materials in accordance with established procedures and specifications, including proper documentation of testing results. These methods include American Society for Testing & Materials (ASTM), American Association of State Highway & Transportation Officials (AASHTO), Department of Transportation (DOT), US Corp of Engineers, etc. Other responsibilities include: Perform physical/index/chemical construction material laboratory testing, as assigned: Concrete/Concrete Masonry Unit (CMU) Testing (concrete cylinder/cmu/core prep and compressing, specialty concrete testing, etc.) Hot Mix Asphalt (HMA) testing (gradations, AC content, density, etc.) Soils (roadway base, select fills, subgrade, etc.), testing (moisture/density, Atterberg Limits, gradations, specialty, strength, etc.) Aggregate testing (gradation, specific gravity, unit weight, etc.) Properly document hours worked and assist in client billing efforts. Perform and keep documentation of routine maintenance and calibration of equipment. Maintain a neat/clean/safe laboratory and work space. Maintain relevant certifications to also include regular review of pertinent testing methods. Meet deadlines and priorities according to established procedures. Demonstrate the safe usage, storage, and maintenance of all tools and equipment, including company vehicle. Maintain effective working relationships with internal and external personnel. Understand, adhere, and participate in the Raba Kistner Health & Safety and BBS Programs, setting a good example of our safety standards. Perform other duties as assigned. Qualifications Shall possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Laboratory Technician in Training: High School Diploma or GED required. No experience necessary Laboratory Technician I: At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly required to sit, stand, walk, climb, balance, stoop, kneel, crouch, stop, and talk. Regularly required to lift and/or move up to 70 pounds (with or without assistance from others) to include, but not limited to, sample containers and equipment. Daily required to use hands and reach. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines, tools, and equipment; must also possess the dexterity to utilize delicate and small laboratory equipment. The noise level in the work environment is usually loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace
10/06/2026
Full time
Job Description Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking a detailed-oriented, dependable Laboratory Technician I, II, or III to join our Consultants team in the Houston and La Porte, TX area. The Laboratory Technician will be responsible for sampling, processing, and testing materials in accordance with established procedures and specifications, including proper documentation of testing results. These methods include American Society for Testing & Materials (ASTM), American Association of State Highway & Transportation Officials (AASHTO), Department of Transportation (DOT), US Corp of Engineers, etc. Other responsibilities include: Perform physical/index/chemical construction material laboratory testing, as assigned: Concrete/Concrete Masonry Unit (CMU) Testing (concrete cylinder/cmu/core prep and compressing, specialty concrete testing, etc.) Hot Mix Asphalt (HMA) testing (gradations, AC content, density, etc.) Soils (roadway base, select fills, subgrade, etc.), testing (moisture/density, Atterberg Limits, gradations, specialty, strength, etc.) Aggregate testing (gradation, specific gravity, unit weight, etc.) Properly document hours worked and assist in client billing efforts. Perform and keep documentation of routine maintenance and calibration of equipment. Maintain a neat/clean/safe laboratory and work space. Maintain relevant certifications to also include regular review of pertinent testing methods. Meet deadlines and priorities according to established procedures. Demonstrate the safe usage, storage, and maintenance of all tools and equipment, including company vehicle. Maintain effective working relationships with internal and external personnel. Understand, adhere, and participate in the Raba Kistner Health & Safety and BBS Programs, setting a good example of our safety standards. Perform other duties as assigned. Qualifications Shall possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Laboratory Technician in Training: High School Diploma or GED required. No experience necessary Laboratory Technician I: At least 6 months of applicable experience in the materials testing and inspection industry and possess at least 1 or more industry certification Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly required to sit, stand, walk, climb, balance, stoop, kneel, crouch, stop, and talk. Regularly required to lift and/or move up to 70 pounds (with or without assistance from others) to include, but not limited to, sample containers and equipment. Daily required to use hands and reach. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines, tools, and equipment; must also possess the dexterity to utilize delicate and small laboratory equipment. The noise level in the work environment is usually loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace
Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Job Summary: Have you ever dreamed of contributing to the development of groundbreaking technologies? Micron plans to invest more than $250 billion globally over the next decade in groundbreaking manufacturing and R&D, including fab expansion in the United States giving us the opportunity to bring in passionate team members to help us continue to be at the forefront of memory in the World! We have an outstanding opportunity for a high energy, tenacious, ambitious, result driven individual with a strong work ethic and integrity to join our Facilities Team in Boise, Idaho! Micron seeking a Life Safety & Fire Alarms Systems Engineer, to become part of a team that is helping shape the future of how the world uses information. T his is an outstanding opportunity to work at the forefront of technology while supporting the design, operation, and continuous improvement of critical life safety systems within world-class semiconductor manufacturing facilities. Responsibilities: Serve as a technical owner for fire alarm, mass notification, emergency communication, and life safety systems. Review of vendor provided design drawings and specifications for completeness, accuracy and adherence to all applicable design and safety standards and codes including NFPA 72, NFPA 70, NFPA 101, IFC, IBC, and FM Global requirements. Review system configurations, equipment layouts, and distribution routing to ensure functionality, life safety compliance, proper egress, maintainability, constructability, and alignment with P&IDs. Collaborate with multidisciplinary engineering, design, construction, Facilities, EHS, IT, Security, and vendor teams to achieve project objectives. Apply critical thinking and analytical problem-solving skills to Identify, develop, propose, and implement cost effective plans that improve overall equipment and system efficiencies. Support design, installation, testing, commissioning, and sustaining operations of life safety systems. Develop and maintain engineering, operations, and maintenance documentation. Troubleshoot system issues, analyze system performance data, and drive reliability improvements through continuous improvement initiatives. Minimum Qualifications Bachelor's degree in electrical, controls, or related engineering fields. 2 years of experience as a facilities life safety systems engineer within an industrial environment. Technical knowledge of fire detection, fire alarm, suppression, mass notification, emergency communication, and life safety systems. Experience with instrumentation and controls, including sensor integration, control panels, and I/O systems. Working knowledge of NFPA 72, NFPA 70, NFPA 101, NFPA 2001, IBC, IFC, and applicable FM Global requirements. Proficient in reviewing schematics, wiring diagrams, equipment specs, and network layouts. Preferred Qualifications 3+ Years of experience within the Semiconductor Industry. Familiarity with smart building technologies, including IoT-enabled fire detection, intelligent suppression systems, and integrated emergency communication platforms. Professional certifications such as NICET Fire Alarm Systems (Level III or IV preferred) or Certified Fire Protection Specialist (CFPS). Strong understanding of system interoperability and integration with facility-wide platforms such as SCADA, BMS, and DCIM systems. Experience using engineering and design tools such as AutoCAD, Revit, and Navisworks, Siemens, Notifier, Edwards, Simplex, Johnson Controls, or similar fire alarm platforms. Interest or experience in embracing agentic AI to improve engineering and operational processes. As a world leader in the semiconductor industry, Micron is dedicated to your personal wellbeing and professional growth. Micron benefits are designed to help you stay well, provide peace of mind and help you prepare for the future. We offer a choice of medical, dental and vision plans in all locations enabling team members to select the plans that best meet their family healthcare needs and budget. Micron also provides benefit programs that help protect your income if you are unable to work due to illness or injury, and paid family leave. Additionally, Micron benefits include a robust paid time-off program and paid holidays. For additional information regarding the Benefit programs available, please see the Benefits Guide posted on . Micron is proud to be an equal opportunity workplace and is an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, citizenship status, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state, or local laws. To learn about your right to work click here. To learn more about Micron, please visit For US Sites Only: To request assistance with the application process and/or for reasonable accommodations, please contact Micron's People Organization at or 1- (select option ) Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron. AI alert: Candidates are encouraged to use AI tools to enhance their resume and/or application materials. However, all information provided must be accurate and reflect the candidate's true skills and experiences. Misuse of AI to fabricate or misrepresent qualifications will result in immediate disqualification. Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website in the About Micron Technology, Inc.
10/04/2026
Full time
Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Job Summary: Have you ever dreamed of contributing to the development of groundbreaking technologies? Micron plans to invest more than $250 billion globally over the next decade in groundbreaking manufacturing and R&D, including fab expansion in the United States giving us the opportunity to bring in passionate team members to help us continue to be at the forefront of memory in the World! We have an outstanding opportunity for a high energy, tenacious, ambitious, result driven individual with a strong work ethic and integrity to join our Facilities Team in Boise, Idaho! Micron seeking a Life Safety & Fire Alarms Systems Engineer, to become part of a team that is helping shape the future of how the world uses information. T his is an outstanding opportunity to work at the forefront of technology while supporting the design, operation, and continuous improvement of critical life safety systems within world-class semiconductor manufacturing facilities. Responsibilities: Serve as a technical owner for fire alarm, mass notification, emergency communication, and life safety systems. Review of vendor provided design drawings and specifications for completeness, accuracy and adherence to all applicable design and safety standards and codes including NFPA 72, NFPA 70, NFPA 101, IFC, IBC, and FM Global requirements. Review system configurations, equipment layouts, and distribution routing to ensure functionality, life safety compliance, proper egress, maintainability, constructability, and alignment with P&IDs. Collaborate with multidisciplinary engineering, design, construction, Facilities, EHS, IT, Security, and vendor teams to achieve project objectives. Apply critical thinking and analytical problem-solving skills to Identify, develop, propose, and implement cost effective plans that improve overall equipment and system efficiencies. Support design, installation, testing, commissioning, and sustaining operations of life safety systems. Develop and maintain engineering, operations, and maintenance documentation. Troubleshoot system issues, analyze system performance data, and drive reliability improvements through continuous improvement initiatives. Minimum Qualifications Bachelor's degree in electrical, controls, or related engineering fields. 2 years of experience as a facilities life safety systems engineer within an industrial environment. Technical knowledge of fire detection, fire alarm, suppression, mass notification, emergency communication, and life safety systems. Experience with instrumentation and controls, including sensor integration, control panels, and I/O systems. Working knowledge of NFPA 72, NFPA 70, NFPA 101, NFPA 2001, IBC, IFC, and applicable FM Global requirements. Proficient in reviewing schematics, wiring diagrams, equipment specs, and network layouts. Preferred Qualifications 3+ Years of experience within the Semiconductor Industry. Familiarity with smart building technologies, including IoT-enabled fire detection, intelligent suppression systems, and integrated emergency communication platforms. Professional certifications such as NICET Fire Alarm Systems (Level III or IV preferred) or Certified Fire Protection Specialist (CFPS). Strong understanding of system interoperability and integration with facility-wide platforms such as SCADA, BMS, and DCIM systems. Experience using engineering and design tools such as AutoCAD, Revit, and Navisworks, Siemens, Notifier, Edwards, Simplex, Johnson Controls, or similar fire alarm platforms. Interest or experience in embracing agentic AI to improve engineering and operational processes. As a world leader in the semiconductor industry, Micron is dedicated to your personal wellbeing and professional growth. Micron benefits are designed to help you stay well, provide peace of mind and help you prepare for the future. We offer a choice of medical, dental and vision plans in all locations enabling team members to select the plans that best meet their family healthcare needs and budget. Micron also provides benefit programs that help protect your income if you are unable to work due to illness or injury, and paid family leave. Additionally, Micron benefits include a robust paid time-off program and paid holidays. For additional information regarding the Benefit programs available, please see the Benefits Guide posted on . Micron is proud to be an equal opportunity workplace and is an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, citizenship status, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state, or local laws. To learn about your right to work click here. To learn more about Micron, please visit For US Sites Only: To request assistance with the application process and/or for reasonable accommodations, please contact Micron's People Organization at or 1- (select option ) Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron. AI alert: Candidates are encouraged to use AI tools to enhance their resume and/or application materials. However, all information provided must be accurate and reflect the candidate's true skills and experiences. Misuse of AI to fabricate or misrepresent qualifications will result in immediate disqualification. Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website in the About Micron Technology, Inc.
Description :The Maintenance Mechanic III is responsible for proficient maintenance related to HVAC and mechanical systems, electrical and plumbing, and safety inspections. Performs preventative, corrective, and routine maintenance of facilities, buildings, and equipment under general supervision. Responds to work requests timely and professionally and completes work assignments. This position is responsible for the installation and replacement of various maintenance related equipment and structures. The Maintenance Mechanic III may be required to work nights, weekends, holidays, and overtime as necessary and approved by the Supervisor.Education: Required: High School Diploma or Equivalent Preferred: Trade School in the mechanical fields Experience: Required: 3-5 years of experience related to maintenance/mechanical. Skills: Proficient communication skills. Ability to prioritize workload. Proficient skills necessary to find solutions to equipment malfunctions and initiate necessary repairs. Proficient knowledge of the safe operation of all tools used in the performance of duties. Proficient knowledge of regulatory requirements governing fire alarm systems, HVAC systems, electrical, plumbing, life safety systems and building repairs. Demonstrates proficient technical skills for the repair and general maintenance of facilities in the following areas: • Interior Finishes • Millwork adjustments and hardware • Doors, frames, and door hardware • Plumbing and fixtures • Electrical wiring, devices, lighting and motors • Heating, ventilation and air conditioning • Medical gas and vacuum • Refrigeration units and ice machines • Air compressors and refrigerated air dryers • Air handlers, fans, and heat wheels • Chilled water and condenser pumps • Hanging mirrors, pictures, documents and decorative items • Furniture repair and refinish Licensure/Certification/Registration: Required: Active Driver's License Required: STI Fire Stop Certified within 1 year of hire (provided by Cox yearly if not already certified) Preferred: Some form of MEP Certification from an accredited trade school. Such as Vatterott College and Ozarks Technical Community College Preferred: Refrigeration or Welding Certification Preferred: Operation of a fork-lift
07/21/2026
Full time
Description :The Maintenance Mechanic III is responsible for proficient maintenance related to HVAC and mechanical systems, electrical and plumbing, and safety inspections. Performs preventative, corrective, and routine maintenance of facilities, buildings, and equipment under general supervision. Responds to work requests timely and professionally and completes work assignments. This position is responsible for the installation and replacement of various maintenance related equipment and structures. The Maintenance Mechanic III may be required to work nights, weekends, holidays, and overtime as necessary and approved by the Supervisor.Education: Required: High School Diploma or Equivalent Preferred: Trade School in the mechanical fields Experience: Required: 3-5 years of experience related to maintenance/mechanical. Skills: Proficient communication skills. Ability to prioritize workload. Proficient skills necessary to find solutions to equipment malfunctions and initiate necessary repairs. Proficient knowledge of the safe operation of all tools used in the performance of duties. Proficient knowledge of regulatory requirements governing fire alarm systems, HVAC systems, electrical, plumbing, life safety systems and building repairs. Demonstrates proficient technical skills for the repair and general maintenance of facilities in the following areas: • Interior Finishes • Millwork adjustments and hardware • Doors, frames, and door hardware • Plumbing and fixtures • Electrical wiring, devices, lighting and motors • Heating, ventilation and air conditioning • Medical gas and vacuum • Refrigeration units and ice machines • Air compressors and refrigerated air dryers • Air handlers, fans, and heat wheels • Chilled water and condenser pumps • Hanging mirrors, pictures, documents and decorative items • Furniture repair and refinish Licensure/Certification/Registration: Required: Active Driver's License Required: STI Fire Stop Certified within 1 year of hire (provided by Cox yearly if not already certified) Preferred: Some form of MEP Certification from an accredited trade school. Such as Vatterott College and Ozarks Technical Community College Preferred: Refrigeration or Welding Certification Preferred: Operation of a fork-lift
