Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/29/2026
Full time
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Pay: $27.00 per hour, based on experience 3rd Shift available $3 Shift Differential Annual toll and Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay: $27.00 per hour, based on experience 3rd Shift available $3 Shift Differential Annual toll and Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Pay Rate: $27.21 per hour, depending on experience . Shift Available: To be Discussed Shift Differential : Yes Annual Tool Allowance: Yes Additional Benefits: Choice of Health plans, (Medical, Dental and Eye) Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay Rate: $27.21 per hour, depending on experience . Shift Available: To be Discussed Shift Differential : Yes Annual Tool Allowance: Yes Additional Benefits: Choice of Health plans, (Medical, Dental and Eye) Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Pay Rate: $27.21 per hour, depending on experience . Shift Available: To be Discussed Shift Differential : Yes Annual Tool Allowance: Yes Additional Benefits: Choice of Health plans, (Medical, Dental and Eye) Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay Rate: $27.21 per hour, depending on experience . Shift Available: To be Discussed Shift Differential : Yes Annual Tool Allowance: Yes Additional Benefits: Choice of Health plans, (Medical, Dental and Eye) Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/29/2026
Full time
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
PAY - $25 - $28 per hour based on experience SCHEDULE- 2ND SHIFT Monday through Friday, 2:00 PM - 10:30 PM (and morning coverage every 6th Saturday from 4:00AM to 12:30PM) SHIFT DIFFERENTIAL- $2 shift differential for second shift $600.00 Tool allowance $275 Annual Boot voucher yearly Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
PAY - $25 - $28 per hour based on experience SCHEDULE- 2ND SHIFT Monday through Friday, 2:00 PM - 10:30 PM (and morning coverage every 6th Saturday from 4:00AM to 12:30PM) SHIFT DIFFERENTIAL- $2 shift differential for second shift $600.00 Tool allowance $275 Annual Boot voucher yearly Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Job Description Job Description Job Summary: We are seeking a skilled and reliable Refrigeration Technician to join our team. This role involves installing, maintaining, and repairing commercial refrigeration systems, with a strong emphasis on ice machines , walk-in coolers , and reach-in refrigeration equipment . The ideal candidate is knowledgeable, self-motivated, and comfortable working independently in a variety of environments. Responsibilities: Install, service, and repair commercial refrigeration units, including: Ice machines (all major brands) Walk-in coolers and freezers Reach-in refrigerators and freezers Diagnose issues and perform preventive maintenance to avoid breakdowns Troubleshoot electrical and mechanical components of refrigeration systems Charge systems with refrigerants and ensure compliance with EPA regulations Maintain clear and accurate service records Communicate effectively with customers and team members Respond to emergency service calls as needed (on-call rotation may apply) Qualifications: High school diploma or equivalent; technical school certification is a plus Minimum 2 years of experience in commercial refrigeration (or similar) EPA Certification (Type II or Universal) Strong diagnostic and problem-solving skills Ability to read and interpret schematics, blueprints, and technical manuals Valid driver's license and clean driving record Must be able to lift 50+ lbs and work in varying environments (hot, cold, confined spaces) Preferred Skills: Experience with brands such as Manitowoc, Hoshizaki, Scotsman, True, and Beverage-Air Strong communication and customer service skills Familiarity with CMMS or digital service ticketing systems What We Offer: Competitive pay (based on experience) Company vehicle and tools Paid holidays and time off Health, dental, and vision insurance Ongoing training and certification support
07/29/2026
Full time
Job Description Job Description Job Summary: We are seeking a skilled and reliable Refrigeration Technician to join our team. This role involves installing, maintaining, and repairing commercial refrigeration systems, with a strong emphasis on ice machines , walk-in coolers , and reach-in refrigeration equipment . The ideal candidate is knowledgeable, self-motivated, and comfortable working independently in a variety of environments. Responsibilities: Install, service, and repair commercial refrigeration units, including: Ice machines (all major brands) Walk-in coolers and freezers Reach-in refrigerators and freezers Diagnose issues and perform preventive maintenance to avoid breakdowns Troubleshoot electrical and mechanical components of refrigeration systems Charge systems with refrigerants and ensure compliance with EPA regulations Maintain clear and accurate service records Communicate effectively with customers and team members Respond to emergency service calls as needed (on-call rotation may apply) Qualifications: High school diploma or equivalent; technical school certification is a plus Minimum 2 years of experience in commercial refrigeration (or similar) EPA Certification (Type II or Universal) Strong diagnostic and problem-solving skills Ability to read and interpret schematics, blueprints, and technical manuals Valid driver's license and clean driving record Must be able to lift 50+ lbs and work in varying environments (hot, cold, confined spaces) Preferred Skills: Experience with brands such as Manitowoc, Hoshizaki, Scotsman, True, and Beverage-Air Strong communication and customer service skills Familiarity with CMMS or digital service ticketing systems What We Offer: Competitive pay (based on experience) Company vehicle and tools Paid holidays and time off Health, dental, and vision insurance Ongoing training and certification support
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
SIGN ON BONUS : UPTO $4,000 Compensation & Schedule Pay: $22.93 - $34.38 per hour (based on experience) Shift Availability: Flexible Shift Differential: Afternoon Shift: $2/hr Night Shift: $3/hr Benefits & Perks $600 annual tool allowance Outstanding benefits package: Full time career opportunity with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
SIGN ON BONUS : UPTO $4,000 Compensation & Schedule Pay: $22.93 - $34.38 per hour (based on experience) Shift Availability: Flexible Shift Differential: Afternoon Shift: $2/hr Night Shift: $3/hr Benefits & Perks $600 annual tool allowance Outstanding benefits package: Full time career opportunity with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/29/2026
Full time
JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education High school diploma or GED required Current and valid driver's license (CDL Preferred, Not Required) Experience Medium / Heavy Duty truck technical training 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Pay: $22.93 - $34.38/HR , depending on experience and Overtime Available Shift Available: Monday- Friday 2:00 PM-10:30 PM Boot Allowance :Yes, $150 Annual Tool Allowance: $600 Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay: $22.93 - $34.38/HR , depending on experience and Overtime Available Shift Available: Monday- Friday 2:00 PM-10:30 PM Boot Allowance :Yes, $150 Annual Tool Allowance: $600 Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Pay: $26.97 - $40.48 per hour based on experience Sign on bonus for New Hires: up to $7,000 3rd shift available $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay: $26.97 - $40.48 per hour based on experience Sign on bonus for New Hires: up to $7,000 3rd shift available $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
River's Edge Hospital and Clinic
Saint Peter, Minnesota
MLT - Baylor shift, overnights Location 1900 N SUNRISE DR, Saint Peter, MN, 56082, United States Base Pay $28.37 - $35.72 / Hour Other Compensation $15,000 sign-on bonus Job Category LABORATORY SERVICES Employee Type Non-Exempt Description Responsibilities: Perform diagnostic laboratory procedures that provide timely and accurate test results for providers use in appropriately diagnosing and treating patients. Participate in our Laboratory's Quality Assurance Plan. Maintain a high level of customer satisfaction by practicing River's Edge Hospital's Standards of Behavior. Understanding that the clinical Lab exists to service patients. Showing initiative and/or cooperation to maintain work flow. Participating in teamwork. Wear a Vocera every day for your whole shift to effectively communicate with other departments and your co-workers. Recognizing testing and lab priorities and act accordingly. Exercising good judgment in non-routine situations. Communicating effectively (orally and in writing) with other workers, supervisors, patients, and the public. Communicating test results, normal ranges and specimen requirements. Answering inquires about test results, methods, specificity, sensitivity, and specific factors that can influence test results. Seeking assistance or clarification when needed: accepting constructive criticism. Adhering to federal and state laws, regulations, and guidelines. (OSHA, CLIA) Adapting to changes in practice, accepting and implementing approved changes and learning new tasks. Taking responsibility for one's own career development, seeking out and participating in appropriate continuing education. Managing stress and resolve conflicts. Perform EKGs. (Mortara ELI 380) EKG Rhythm Strip-Lead II when ordered by the provider. Right sided EKG when ordered by provider. Pediatric EKGs. Perform only those waived, moderate, and/or high complexity tests that are authorized by the Lab Manager and require a degree skill commensurate with the individual's education, training or experience and technical abilities. Follow the Lab's procedures for specimen handling and processing, test analyses, reporting and maintaining records of patient test results. Properly identify and collect adequate specimens for laboratory testing via the following collection processes: Venipuncture Capillary collection Arterial collection (Radial only) Participate in proficiency testing program. Adhere to the Laboratory's quality control policy and procedures; document all quality control activities, instruments and procedure calibrations and maintenance performed. Follow the Lab's established polices and procedures whenever test systems are not within the Lab's established acceptable levels of performance. Be capable of identifying problems that may adversely affect test performance or reporting of test results and either must correct the problem or immediately notify the Lab Manager, Senior Lab Tech, Technical Supervisor, or Clinical Consultant. Document all corrective actions taken when test systems deviate from the Lab's established performance specifications. Possess a working knowledge of reagent stability and storage. Is knowledgeable and adheres to Patient Bill of Rights and hospital policies relating to privacy, confidentiality and respect (HIPAA). Is knowledgeable in and follows and promotes facility policies and procedures including, but not limited to Infection Control, Safety, Quality Assurance, Lab's Chemical Hygiene Program, etc. Must be flexible with sharing scheduled weekends, holidays, evening shift, and overnight scheduled shift. Is willing to serve on facility committees when asked to do so (Employee Safety Committee). Is willing to participate in CQI and other lab projects. Must be flexible with sharing training duties for new employees and MLT/MLS students with other Lab personnel when requested to do so. Must be trained and certified to collect Urine Drug Screens for DOT and Non-DOT employees. Requirements Have earned an Associate Degree as a Medical Laboratory Technician (MLT)from an accredited institution and must be ASCP Certified or equivalent. If not already certified,new graduates must be eligible for certification and obtain MLT Certification within one year of employment. Must be certified with one of the following: ASCP, HEW, HHS, ASMT. Must be able to travel to other work sites as needed with own transportation. Certified in Basic Life Support (BLS) or will be certified within six months of hire through the American Heart Association. Summary Baylor Shift - Weekend Only We have one full-time position working weekend only, 72 hours per two weeks but receiving pay for 80 hours. 12 hour shift overnights ; working every Friday, Saturday, and Sunday and weekend holidays. $15,000 sign-on bonus is paid as $5,000 upon hire and $5,000 on first and second employment anniversaries. Compensation details: 28.37-35.72 Hourly Wage PI07904cf728e4-6454
07/29/2026
Full time
MLT - Baylor shift, overnights Location 1900 N SUNRISE DR, Saint Peter, MN, 56082, United States Base Pay $28.37 - $35.72 / Hour Other Compensation $15,000 sign-on bonus Job Category LABORATORY SERVICES Employee Type Non-Exempt Description Responsibilities: Perform diagnostic laboratory procedures that provide timely and accurate test results for providers use in appropriately diagnosing and treating patients. Participate in our Laboratory's Quality Assurance Plan. Maintain a high level of customer satisfaction by practicing River's Edge Hospital's Standards of Behavior. Understanding that the clinical Lab exists to service patients. Showing initiative and/or cooperation to maintain work flow. Participating in teamwork. Wear a Vocera every day for your whole shift to effectively communicate with other departments and your co-workers. Recognizing testing and lab priorities and act accordingly. Exercising good judgment in non-routine situations. Communicating effectively (orally and in writing) with other workers, supervisors, patients, and the public. Communicating test results, normal ranges and specimen requirements. Answering inquires about test results, methods, specificity, sensitivity, and specific factors that can influence test results. Seeking assistance or clarification when needed: accepting constructive criticism. Adhering to federal and state laws, regulations, and guidelines. (OSHA, CLIA) Adapting to changes in practice, accepting and implementing approved changes and learning new tasks. Taking responsibility for one's own career development, seeking out and participating in appropriate continuing education. Managing stress and resolve conflicts. Perform EKGs. (Mortara ELI 380) EKG Rhythm Strip-Lead II when ordered by the provider. Right sided EKG when ordered by provider. Pediatric EKGs. Perform only those waived, moderate, and/or high complexity tests that are authorized by the Lab Manager and require a degree skill commensurate with the individual's education, training or experience and technical abilities. Follow the Lab's procedures for specimen handling and processing, test analyses, reporting and maintaining records of patient test results. Properly identify and collect adequate specimens for laboratory testing via the following collection processes: Venipuncture Capillary collection Arterial collection (Radial only) Participate in proficiency testing program. Adhere to the Laboratory's quality control policy and procedures; document all quality control activities, instruments and procedure calibrations and maintenance performed. Follow the Lab's established polices and procedures whenever test systems are not within the Lab's established acceptable levels of performance. Be capable of identifying problems that may adversely affect test performance or reporting of test results and either must correct the problem or immediately notify the Lab Manager, Senior Lab Tech, Technical Supervisor, or Clinical Consultant. Document all corrective actions taken when test systems deviate from the Lab's established performance specifications. Possess a working knowledge of reagent stability and storage. Is knowledgeable and adheres to Patient Bill of Rights and hospital policies relating to privacy, confidentiality and respect (HIPAA). Is knowledgeable in and follows and promotes facility policies and procedures including, but not limited to Infection Control, Safety, Quality Assurance, Lab's Chemical Hygiene Program, etc. Must be flexible with sharing scheduled weekends, holidays, evening shift, and overnight scheduled shift. Is willing to serve on facility committees when asked to do so (Employee Safety Committee). Is willing to participate in CQI and other lab projects. Must be flexible with sharing training duties for new employees and MLT/MLS students with other Lab personnel when requested to do so. Must be trained and certified to collect Urine Drug Screens for DOT and Non-DOT employees. Requirements Have earned an Associate Degree as a Medical Laboratory Technician (MLT)from an accredited institution and must be ASCP Certified or equivalent. If not already certified,new graduates must be eligible for certification and obtain MLT Certification within one year of employment. Must be certified with one of the following: ASCP, HEW, HHS, ASMT. Must be able to travel to other work sites as needed with own transportation. Certified in Basic Life Support (BLS) or will be certified within six months of hire through the American Heart Association. Summary Baylor Shift - Weekend Only We have one full-time position working weekend only, 72 hours per two weeks but receiving pay for 80 hours. 12 hour shift overnights ; working every Friday, Saturday, and Sunday and weekend holidays. $15,000 sign-on bonus is paid as $5,000 upon hire and $5,000 on first and second employment anniversaries. Compensation details: 28.37-35.72 Hourly Wage PI07904cf728e4-6454
Job Description Job Description Commercial HVAC Service Technician Commercial HVAC Service Technician - Up to $5,000 Sign-on Bonus, based on experience. Oliver Heating & Cooling is a long-standing, reputable company looking for an experienced (5-7years) HVAC technician to join our Commercial Service team and service the Delaware County/Phila area ! At Oliver, we believe where you work matters just as much as what you do. As a family-owned company, we've built a culture where people are known by name, supported by leadership, and treated like part of the team-not just a number. We combine the feel of a close-knit company with the systems and resources that help our employees succeed every day. Our technicians are backed by a strong support team that handles scheduling, customer service, dispatching, and administrative needs so you can stay focused on what you do best. We invest in our employees with take-home company vehicles, excellent tools and resources for a successful career, competitive pay, and a comprehensive benefits package with no employee premium costs for medical benefits. We know that when we take care of our team, they can take care of our customers. We provide our employees with 100% paid premiums on health care, vision, dental, prescription coverage, paid vacation, paid holidays, tool allowance and a 401K plan with a guarantee match. At Oliver Heating & Cooling, our greatest asset is our people. We pride ourselves on cultivating a supportive and dynamic work culture that not only values each individual but also encourages professional development. Here, you'll find a team-oriented environment where growth is not just encouraged but actively promoted. Come join one of the industry's leading HVAC companies and experience how a commitment to our employees translates into success for everyone. Job Duties include: Preventative maintenance, troubleshooting, and repair to a variety of commercial HVAC systems, Chillers, Boilers, Pumps, and BAS systems. Organization and attention to detail Ability to work efficiently- maximizing productivity and minimizing down time Ability to utilize an electronic tablet for all facets of information sharing, scheduling, work order write ups, quotes, emails, etc. Obtain vendor quotes, order parts and follow up with vendors until parts are received Create quotes for customers Ability to manage own portfolio of accounts (communicate and schedule directly with customers, prioritize workload, stay on task with PM's, etc.) This will be a gradual process, allowing sufficient time for acclimation and development Carrying and climbing ladders, up to 40' Share in after-hours on-call rotation (1-week intervals) Comply with all applicable standards, policies, or procedures, such as PPE, safety procedures and/or the maintenance of a clean work area Requirements: 5-7+ years' experience in Commercial HVAC Service a must. Controls knowledge not required but is a plus! EPA Type I + Type II refrigeration certification (Type III is a plus!) Ability and willingness to work overtime (5-10 hrs. per week) Reliability / dependability Valid drivers license and a good record Pre-employment substance screening, physical, and background check This position requires a range of physical abilities consisting of climbing, carrying 50 lbs. or more, bending, reaching, kneeling, crawling, push/pull, heights, confined spaces, etc. For questions / additional information on physical requirements, feel free to inquire. Other Benefits Include: Multi-Level, State-recognized Apprenticeship Program, providing theoretical and on-the-job training. Bonuses/commissions available 401K with company matching Boot reimbursement program Arc Flash uniforms provided Annual performance review Opportunities for advancement Health plan with no premiums Health/Flex spending accounts available Short/Long term disability Life Insurance Company-sponsored events throughout the year to promote co-worker and family comradery The Oliver Way: To provide the best service in the industry Investment in our people Career path to advancement opportunities Give back to the community. Golden Rule commitment Open door policy to ownership Family-owned business over 50 years Salary commensurate with experience Company Description Since 1971, Oliver Heating & Cooling has been proudly serving the Delaware Valley. We are the premier provider of heating, air conditioning, plumbing, electrical, and remodeling services to home owners and businesses in the area. Our company holds multiple HVAC certifications and awards. We are very proud of our office staff and technicians that are skilled, knowledgeable, and ready to help in any way you need. At Oliver, we take pride in our values and in providing the greatest customer experience possible. Company Description Since 1971, Oliver Heating & Cooling has been proudly serving the Delaware Valley. We are the premier provider of heating, air conditioning, plumbing, electrical, and remodeling services to home owners and businesses in the area. Our company holds multiple HVAC certifications and awards. We are very proud of our office staff and technicians that are skilled, knowledgeable, and ready to help in any way you need. At Oliver, we take pride in our values and in providing the greatest customer experience possible.
07/29/2026
Full time
Job Description Job Description Commercial HVAC Service Technician Commercial HVAC Service Technician - Up to $5,000 Sign-on Bonus, based on experience. Oliver Heating & Cooling is a long-standing, reputable company looking for an experienced (5-7years) HVAC technician to join our Commercial Service team and service the Delaware County/Phila area ! At Oliver, we believe where you work matters just as much as what you do. As a family-owned company, we've built a culture where people are known by name, supported by leadership, and treated like part of the team-not just a number. We combine the feel of a close-knit company with the systems and resources that help our employees succeed every day. Our technicians are backed by a strong support team that handles scheduling, customer service, dispatching, and administrative needs so you can stay focused on what you do best. We invest in our employees with take-home company vehicles, excellent tools and resources for a successful career, competitive pay, and a comprehensive benefits package with no employee premium costs for medical benefits. We know that when we take care of our team, they can take care of our customers. We provide our employees with 100% paid premiums on health care, vision, dental, prescription coverage, paid vacation, paid holidays, tool allowance and a 401K plan with a guarantee match. At Oliver Heating & Cooling, our greatest asset is our people. We pride ourselves on cultivating a supportive and dynamic work culture that not only values each individual but also encourages professional development. Here, you'll find a team-oriented environment where growth is not just encouraged but actively promoted. Come join one of the industry's leading HVAC companies and experience how a commitment to our employees translates into success for everyone. Job Duties include: Preventative maintenance, troubleshooting, and repair to a variety of commercial HVAC systems, Chillers, Boilers, Pumps, and BAS systems. Organization and attention to detail Ability to work efficiently- maximizing productivity and minimizing down time Ability to utilize an electronic tablet for all facets of information sharing, scheduling, work order write ups, quotes, emails, etc. Obtain vendor quotes, order parts and follow up with vendors until parts are received Create quotes for customers Ability to manage own portfolio of accounts (communicate and schedule directly with customers, prioritize workload, stay on task with PM's, etc.) This will be a gradual process, allowing sufficient time for acclimation and development Carrying and climbing ladders, up to 40' Share in after-hours on-call rotation (1-week intervals) Comply with all applicable standards, policies, or procedures, such as PPE, safety procedures and/or the maintenance of a clean work area Requirements: 5-7+ years' experience in Commercial HVAC Service a must. Controls knowledge not required but is a plus! EPA Type I + Type II refrigeration certification (Type III is a plus!) Ability and willingness to work overtime (5-10 hrs. per week) Reliability / dependability Valid drivers license and a good record Pre-employment substance screening, physical, and background check This position requires a range of physical abilities consisting of climbing, carrying 50 lbs. or more, bending, reaching, kneeling, crawling, push/pull, heights, confined spaces, etc. For questions / additional information on physical requirements, feel free to inquire. Other Benefits Include: Multi-Level, State-recognized Apprenticeship Program, providing theoretical and on-the-job training. Bonuses/commissions available 401K with company matching Boot reimbursement program Arc Flash uniforms provided Annual performance review Opportunities for advancement Health plan with no premiums Health/Flex spending accounts available Short/Long term disability Life Insurance Company-sponsored events throughout the year to promote co-worker and family comradery The Oliver Way: To provide the best service in the industry Investment in our people Career path to advancement opportunities Give back to the community. Golden Rule commitment Open door policy to ownership Family-owned business over 50 years Salary commensurate with experience Company Description Since 1971, Oliver Heating & Cooling has been proudly serving the Delaware Valley. We are the premier provider of heating, air conditioning, plumbing, electrical, and remodeling services to home owners and businesses in the area. Our company holds multiple HVAC certifications and awards. We are very proud of our office staff and technicians that are skilled, knowledgeable, and ready to help in any way you need. At Oliver, we take pride in our values and in providing the greatest customer experience possible. Company Description Since 1971, Oliver Heating & Cooling has been proudly serving the Delaware Valley. We are the premier provider of heating, air conditioning, plumbing, electrical, and remodeling services to home owners and businesses in the area. Our company holds multiple HVAC certifications and awards. We are very proud of our office staff and technicians that are skilled, knowledgeable, and ready to help in any way you need. At Oliver, we take pride in our values and in providing the greatest customer experience possible.
Jabil Elmira - Engineering Technician II - CNC Programmer - 2026 SUMMARY This opportunity is a CNC Programmer role, where the individual will be responsible for developing and maintaining CNC machining processes. KEY RESPONSIBILITIES Provides technical support for existing processes, including hands-on troubleshooting and failure analysis for milling machines, lathes, EDMs and other CNC equipment. Performs programing, qualification, implementation and debugging of CNC programming and functional framework for new and updated machining processes. Performs measurement of parts using manual gaging and automated methods. Uses data driven decision making for CNC program corrections and improvements. Participates in creation of machine requirements for modifications and new builds. Participates in machine selection, vendor functional acceptance, site acceptance activities, installation and qualification activities. Participates in cutting tool selection, custom cutting tool design, sourcing and testing. Participates in tool holder selection, fixture selection, fixture design, sourcing and testing. Performs installation, alignment and qualification of machine components including 4th and 5th axis rotary tables, integrated tool setters, touch probes and live tool spindles. Participates in training of Machine Operators on equipment maintenance, tool change, tool setting, tool offsets, data transfers and other routine operational requirements. Provides input on creative ways to reduce costs by streamlining processes and systems. Acts as a role model for Machine Operators in terms of attitude, machine asset care, troubleshooting, adherence to processes and decision making. May perform other duties and responsibilities as assigned. EDUCATION AND EXPERIENCE REQUIREMENTS Associate's degree preferred; or minimum of two years related experience and/or training Minimum of 2 years of CNC programming experience. KNOWLEDGE AND SKILLS REQUIREMENTS Experience with troubleshooting machine mechanical systems required. Experience with technical drawings, geometric dimensioning and tolerancing required. Understanding of calculations related to metal cutting (speeds, feeds, rpm, etc.). Experience with CNC equipment and related programming software is required. General CNC-ISO programming required (G codes/M codes) - Fanuc and/or Siemens desired Working knowledge CAD/CAM software required. Experience with Mastercam and CAD/CAM post processing desired Strong computer skills including Microsoft Office, specifically Word and Excel. Ability to prioritize work-schedules and coordinate multiple tasks. OTHER Supports and operates in a proactive, safe, climate-controlled environment Mix of sitting and standing with up to 7 hours per day standing. Requires lifting and maneuvering fixtures, material and other equipment up to 50 pounds. Willing to adjust schedule to support 2nd, 3rd and weekend operations on occasion as needed. Standard working hours apply with potential for overtime as needed. Readiness to work in conditions that may be warm, cool and/or noisy along with exposure to oil, coolants and other manufacturing related chemicals.
07/29/2026
Full time
Jabil Elmira - Engineering Technician II - CNC Programmer - 2026 SUMMARY This opportunity is a CNC Programmer role, where the individual will be responsible for developing and maintaining CNC machining processes. KEY RESPONSIBILITIES Provides technical support for existing processes, including hands-on troubleshooting and failure analysis for milling machines, lathes, EDMs and other CNC equipment. Performs programing, qualification, implementation and debugging of CNC programming and functional framework for new and updated machining processes. Performs measurement of parts using manual gaging and automated methods. Uses data driven decision making for CNC program corrections and improvements. Participates in creation of machine requirements for modifications and new builds. Participates in machine selection, vendor functional acceptance, site acceptance activities, installation and qualification activities. Participates in cutting tool selection, custom cutting tool design, sourcing and testing. Participates in tool holder selection, fixture selection, fixture design, sourcing and testing. Performs installation, alignment and qualification of machine components including 4th and 5th axis rotary tables, integrated tool setters, touch probes and live tool spindles. Participates in training of Machine Operators on equipment maintenance, tool change, tool setting, tool offsets, data transfers and other routine operational requirements. Provides input on creative ways to reduce costs by streamlining processes and systems. Acts as a role model for Machine Operators in terms of attitude, machine asset care, troubleshooting, adherence to processes and decision making. May perform other duties and responsibilities as assigned. EDUCATION AND EXPERIENCE REQUIREMENTS Associate's degree preferred; or minimum of two years related experience and/or training Minimum of 2 years of CNC programming experience. KNOWLEDGE AND SKILLS REQUIREMENTS Experience with troubleshooting machine mechanical systems required. Experience with technical drawings, geometric dimensioning and tolerancing required. Understanding of calculations related to metal cutting (speeds, feeds, rpm, etc.). Experience with CNC equipment and related programming software is required. General CNC-ISO programming required (G codes/M codes) - Fanuc and/or Siemens desired Working knowledge CAD/CAM software required. Experience with Mastercam and CAD/CAM post processing desired Strong computer skills including Microsoft Office, specifically Word and Excel. Ability to prioritize work-schedules and coordinate multiple tasks. OTHER Supports and operates in a proactive, safe, climate-controlled environment Mix of sitting and standing with up to 7 hours per day standing. Requires lifting and maneuvering fixtures, material and other equipment up to 50 pounds. Willing to adjust schedule to support 2nd, 3rd and weekend operations on occasion as needed. Standard working hours apply with potential for overtime as needed. Readiness to work in conditions that may be warm, cool and/or noisy along with exposure to oil, coolants and other manufacturing related chemicals.
JOB SUMMARY Do you have expertise in repairing injection molding equipment in a manufacturing setting? Jabil has an exciting opportunity for experienced Maintenance Technicians in Atlanta, GA! Multiple shifts and a sign-on bonus are available! How will you make an impact? In this role, you will be performing complex maintenance and repairs on electrical, mechanical, pneumatic, and/or hydraulic plant equipment including injection molding machinery. Second Shift 3pm -11:30 pm, Mon - Fri, on-call coverage as well Pay: $30 DOE + Quarterly bonuses based on performance Sign-On Bonus Up to $1,500 Competitive Benefits This position will not offer visa sponsorship. What will you do? Performs routine preventive maintenance and emergency mechanical, hydraulic, pneumatic, and electrical maintenance on production systems and equipment, using knowledge of electrical-mechanical devices, circuitry, electronics, motors, wiring diagrams, schematics, and blueprints. Troubleshoots, repairs, aligns, calibrates, inspects, and tests a variety of production systems and equipment. Performing hydraulic, pneumatic, high voltage electrical, and mechanical repairs on Injection molding equipment. Set up assembly line equipment within established parameters. Assists in installing new equipment and in moving equipment to new locations. Disassembles machines and parts and adjusts repairs or replaces defective parts and materials. Uses a variety of basic hand and power tools and equipment including hand drill, bench grinder, and band saw. Instruct the Production Team on the proper use of equipment. Maintains appropriate maintenance and repair logs. Cleans and lubricates parts and equipment as scheduled. Learns all aspects of machine maintenance and becomes cross-trained in all areas of molding/assembly equipment. Requisitions parts needed for completion of preventive maintenance responsibilities. Support all company safety and quality programs and initiatives. Other responsibilities may be assigned from time to time as needed, based on the evolution of the company and the requirements of the department/position. How will you get here? Education: High School Diploma/GED. Experience: 5 years of experience in manufacturing equipment maintenance. Maintenance experience repairing plastic injection molding equipment Requires solid experience in repairing mechanical, electrical, hydraulic, and pneumatic systems. Solid knowledge of mechanical equipment and electrical and hydraulic drawings. Mechanical and electrical troubleshooting, diagnosis, and repair. Ability to read and write English and interpret documents such as technical manuals, blueprints, safety rules, operating instructions, and procedure manuals. Knowledge and ability to use relevant hand tools in the repair of equipment. What can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities Quarterly bonus opportunities
07/29/2026
Full time
JOB SUMMARY Do you have expertise in repairing injection molding equipment in a manufacturing setting? Jabil has an exciting opportunity for experienced Maintenance Technicians in Atlanta, GA! Multiple shifts and a sign-on bonus are available! How will you make an impact? In this role, you will be performing complex maintenance and repairs on electrical, mechanical, pneumatic, and/or hydraulic plant equipment including injection molding machinery. Second Shift 3pm -11:30 pm, Mon - Fri, on-call coverage as well Pay: $30 DOE + Quarterly bonuses based on performance Sign-On Bonus Up to $1,500 Competitive Benefits This position will not offer visa sponsorship. What will you do? Performs routine preventive maintenance and emergency mechanical, hydraulic, pneumatic, and electrical maintenance on production systems and equipment, using knowledge of electrical-mechanical devices, circuitry, electronics, motors, wiring diagrams, schematics, and blueprints. Troubleshoots, repairs, aligns, calibrates, inspects, and tests a variety of production systems and equipment. Performing hydraulic, pneumatic, high voltage electrical, and mechanical repairs on Injection molding equipment. Set up assembly line equipment within established parameters. Assists in installing new equipment and in moving equipment to new locations. Disassembles machines and parts and adjusts repairs or replaces defective parts and materials. Uses a variety of basic hand and power tools and equipment including hand drill, bench grinder, and band saw. Instruct the Production Team on the proper use of equipment. Maintains appropriate maintenance and repair logs. Cleans and lubricates parts and equipment as scheduled. Learns all aspects of machine maintenance and becomes cross-trained in all areas of molding/assembly equipment. Requisitions parts needed for completion of preventive maintenance responsibilities. Support all company safety and quality programs and initiatives. Other responsibilities may be assigned from time to time as needed, based on the evolution of the company and the requirements of the department/position. How will you get here? Education: High School Diploma/GED. Experience: 5 years of experience in manufacturing equipment maintenance. Maintenance experience repairing plastic injection molding equipment Requires solid experience in repairing mechanical, electrical, hydraulic, and pneumatic systems. Solid knowledge of mechanical equipment and electrical and hydraulic drawings. Mechanical and electrical troubleshooting, diagnosis, and repair. Ability to read and write English and interpret documents such as technical manuals, blueprints, safety rules, operating instructions, and procedure manuals. Knowledge and ability to use relevant hand tools in the repair of equipment. What can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities Quarterly bonus opportunities
Maintenance Technician II Position Type: Full time Weekly Scheduled Hours: 40 State: California City: San Francisco Zip Code: 94107 Total Base Pay Range: $57,000.00 - $80,500.00 Overview: AvalonBay Communities, Inc., an equity REIT, has a long-term track record of developing, redeveloping, acquiring and managing distinctive apartment homes in some of the best U.S. markets, and delivering outsized, risk-adjusted returns to shareholders. With equal parts experience and vision, we've established a leadership position rooted in our purpose of creating a better way to live and that is always focused on building value for the long term. Creating a better way to live is the purpose that binds AvalonBay associates. We take that purpose seriously and expect you will as well. By focusing on collaboration, innovation, and taking ownership of our choices and actions, we act in ways that focus on creating value for our customers, investors and associates. Your positive, professional, and consistent personal interactions make AvalonBay a great place to work. The Role: Ready to take your maintenance skills to the next level? At AvalonBay Communities, we're not just maintaining apartment homes; we're creating exceptional living experiences. If you're a talented Maintenance Technician looking to advance your career, you're in the right place. Our team is searching for a Maintenance Technician who is ready to tackle challenges, bring innovative solutions to the table, and ensure our residents enjoy a superior quality of living. If you're passionate about fixing, enhancing, and perfecting, we want you to be a part of our dynamic community. Join us at AvalonBay and be a part of redefining what it means to live in style and comfort! The Maintenance Technician is responsible for executing maintenance requests by diagnosing problems and making repairs in order to maintain the physical condition of the community and to ensure that service requests and repairs are made in a timely manner. As a maintenance technician, you will be the talented individual who: Diagnoses and repairs problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.), and waste management systems. Completes assigned service requests and repairs consistent with company operating and equipment/supply standards and in a timely manner. Ensures vacant apartment homes are rent-ready in a timely manner. Perform turnkey work as required. Conducts apartment Preventative Maintenance Assist in painting both interior and exterior surfaces Maintains Incident and Injury Free safety culture by following all AvalonBay safety policies and procedures and reporting any unsafe behavior or conditions including nonfunctioning equipment. Performs Hot Works including brazing, soldering, and welding within AvalonBay's Standards. You Have: 2-3 years of experience in maintenance work, including knowledge surrounding HVAC repair, Plumbing, Electrical, and General Maintenance repair work. A valid driver's license. Ability to accommodate an on-call schedule in rotation with the team each month. Ability to communicate with our associates and residents in order to provide customer service. Ability to read and understand policies and procedures including but not limited to Key Control Policy, Apartment Home Turnover Policy and all Maintenance Emergency policies and procedures. Ability to identify cleaning and chemical supplies, ability to read and understand Hazard Communication Safety Data Sheets (SDS), ability to understand proper applications of chemicals and general cleaning supplies and ability to frequently handle these products. Knowledge of Personal Protective Equipment (PPE) and ability to use properly. Basic understanding of emergency systems, shutoffs, locations and sequence of operations. Demonstrates knowledge of paint types and paint tools How AvalonBay Supports You: We know that our teams are the beating heart of our success and we're committed to showing our appreciation. We offer: Comprehensive benefits - health, dental and vision, 401(k) with company match, paid vacation and holidays, tuition reimbursement, an employee stock purchase plan and more. Click on Benefits () for information. Growth based on achievement and promotion from within. Associate recognition (a company-wide recognition program that celebrates associate efforts and successes in contributing to the overall success of the organization - including destination awards, 'AvalonBay's Very Best' recognition program and others!). A 20% discount on our incredible apartment homes. A culture built on purpose and our core values - A Commitment to Integrity, A Spirit of Caring, and A Focus on Continuous Improvement. Additional Info: AvalonBay is proud to be an equal opportunity employer and is committed to an inclusive and diverse work environment free of discrimination and harassment. We believe that in order to achieve our purpose of creating a better way to live, we must recruit, develop and retain associates with a wide range of backgrounds, experiences and perspectives and create an environment that encourages all voices to be heard, understood and appreciated. With this we know we can do great things. AvalonBay makes employment decisions without regard to a person's race, ethnicity, color, religion, sex, national origin, sexual orientation, gender identity, pregnancy (including childbirth, lactation or related medical conditions), age, physical or mental disability, genetic information (including characteristics or testing), citizenship status, military or veteran status, or any other status protected by the law. AvalonBay will consider for employment qualified applicants with criminal histories in a manner consistent with requirements under the law. Applications are being accepted on an ongoing basis. AvalonBay does not require or request that you provide any information that identifies your age, date of birth, or dates of school attendance or graduation. Please redact this information prior to the submission of your application and/or leave these fields incomplete on your application. For California residents, if you elect to apply to AvalonBay you accept the AvalonBay California Personnel Privacy Notice ()
07/29/2026
Full time
Maintenance Technician II Position Type: Full time Weekly Scheduled Hours: 40 State: California City: San Francisco Zip Code: 94107 Total Base Pay Range: $57,000.00 - $80,500.00 Overview: AvalonBay Communities, Inc., an equity REIT, has a long-term track record of developing, redeveloping, acquiring and managing distinctive apartment homes in some of the best U.S. markets, and delivering outsized, risk-adjusted returns to shareholders. With equal parts experience and vision, we've established a leadership position rooted in our purpose of creating a better way to live and that is always focused on building value for the long term. Creating a better way to live is the purpose that binds AvalonBay associates. We take that purpose seriously and expect you will as well. By focusing on collaboration, innovation, and taking ownership of our choices and actions, we act in ways that focus on creating value for our customers, investors and associates. Your positive, professional, and consistent personal interactions make AvalonBay a great place to work. The Role: Ready to take your maintenance skills to the next level? At AvalonBay Communities, we're not just maintaining apartment homes; we're creating exceptional living experiences. If you're a talented Maintenance Technician looking to advance your career, you're in the right place. Our team is searching for a Maintenance Technician who is ready to tackle challenges, bring innovative solutions to the table, and ensure our residents enjoy a superior quality of living. If you're passionate about fixing, enhancing, and perfecting, we want you to be a part of our dynamic community. Join us at AvalonBay and be a part of redefining what it means to live in style and comfort! The Maintenance Technician is responsible for executing maintenance requests by diagnosing problems and making repairs in order to maintain the physical condition of the community and to ensure that service requests and repairs are made in a timely manner. As a maintenance technician, you will be the talented individual who: Diagnoses and repairs problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.), and waste management systems. Completes assigned service requests and repairs consistent with company operating and equipment/supply standards and in a timely manner. Ensures vacant apartment homes are rent-ready in a timely manner. Perform turnkey work as required. Conducts apartment Preventative Maintenance Assist in painting both interior and exterior surfaces Maintains Incident and Injury Free safety culture by following all AvalonBay safety policies and procedures and reporting any unsafe behavior or conditions including nonfunctioning equipment. Performs Hot Works including brazing, soldering, and welding within AvalonBay's Standards. You Have: 2-3 years of experience in maintenance work, including knowledge surrounding HVAC repair, Plumbing, Electrical, and General Maintenance repair work. A valid driver's license. Ability to accommodate an on-call schedule in rotation with the team each month. Ability to communicate with our associates and residents in order to provide customer service. Ability to read and understand policies and procedures including but not limited to Key Control Policy, Apartment Home Turnover Policy and all Maintenance Emergency policies and procedures. Ability to identify cleaning and chemical supplies, ability to read and understand Hazard Communication Safety Data Sheets (SDS), ability to understand proper applications of chemicals and general cleaning supplies and ability to frequently handle these products. Knowledge of Personal Protective Equipment (PPE) and ability to use properly. Basic understanding of emergency systems, shutoffs, locations and sequence of operations. Demonstrates knowledge of paint types and paint tools How AvalonBay Supports You: We know that our teams are the beating heart of our success and we're committed to showing our appreciation. We offer: Comprehensive benefits - health, dental and vision, 401(k) with company match, paid vacation and holidays, tuition reimbursement, an employee stock purchase plan and more. Click on Benefits () for information. Growth based on achievement and promotion from within. Associate recognition (a company-wide recognition program that celebrates associate efforts and successes in contributing to the overall success of the organization - including destination awards, 'AvalonBay's Very Best' recognition program and others!). A 20% discount on our incredible apartment homes. A culture built on purpose and our core values - A Commitment to Integrity, A Spirit of Caring, and A Focus on Continuous Improvement. Additional Info: AvalonBay is proud to be an equal opportunity employer and is committed to an inclusive and diverse work environment free of discrimination and harassment. We believe that in order to achieve our purpose of creating a better way to live, we must recruit, develop and retain associates with a wide range of backgrounds, experiences and perspectives and create an environment that encourages all voices to be heard, understood and appreciated. With this we know we can do great things. AvalonBay makes employment decisions without regard to a person's race, ethnicity, color, religion, sex, national origin, sexual orientation, gender identity, pregnancy (including childbirth, lactation or related medical conditions), age, physical or mental disability, genetic information (including characteristics or testing), citizenship status, military or veteran status, or any other status protected by the law. AvalonBay will consider for employment qualified applicants with criminal histories in a manner consistent with requirements under the law. Applications are being accepted on an ongoing basis. AvalonBay does not require or request that you provide any information that identifies your age, date of birth, or dates of school attendance or graduation. Please redact this information prior to the submission of your application and/or leave these fields incomplete on your application. For California residents, if you elect to apply to AvalonBay you accept the AvalonBay California Personnel Privacy Notice ()
KAG is now seeking to hire a Diesel Technician II-III! Diesel Mechanics are required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Hours: Monday to Friday 7-3:30 with weekends as needed Salary $25-30per hour Guaranteed increases with completion of training programs and verified prior experience Benefits 401K + Match Medical Dental Vision Paid holidays and vacations $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Extensive onsite paid training Growth opportunities Pay Range: - per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements Valid Driver's License Air Brake Certification (FMSCR 396.25) or 1+ year of verifiable experience and the ability to obtain Motor Vehicle Air Conditioning Repair (EPA 609) or the ability to obtain Commercial Motor Vehicle Inspector 3 years experience or 1 year experience and ability to obtain Diesel Mechanics are required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Qualifications 1 - 5 years of experience in heavy-duty vehicle maintenance/repair Preventative maintenance and repair of Class 5 - 8 commercial vehicles and tank trailer inspection Ability to frequently lift up to 50 lbs Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law. KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. At KAG, it's our people who make it possible to achieve our company goal as One Team Driven to Make a Difference! With expert knowledge, supportive leadership, and a strong belief in our company culture, our team exemplifies the passion, pride, and entrepreneurial spirit that help us reach our goals every day.
07/29/2026
Full time
KAG is now seeking to hire a Diesel Technician II-III! Diesel Mechanics are required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Hours: Monday to Friday 7-3:30 with weekends as needed Salary $25-30per hour Guaranteed increases with completion of training programs and verified prior experience Benefits 401K + Match Medical Dental Vision Paid holidays and vacations $100 annual boot allowance, paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Extensive onsite paid training Growth opportunities Pay Range: - per_hour, General Benefits: Benefits include medical, dental, vision and prescription coverage, a 401K program with company match, life insurance, short- and long-term disability, accident insurance, critical illness insurance and hospital indemnity insurance. Requirements Valid Driver's License Air Brake Certification (FMSCR 396.25) or 1+ year of verifiable experience and the ability to obtain Motor Vehicle Air Conditioning Repair (EPA 609) or the ability to obtain Commercial Motor Vehicle Inspector 3 years experience or 1 year experience and ability to obtain Diesel Mechanics are required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Qualifications 1 - 5 years of experience in heavy-duty vehicle maintenance/repair Preventative maintenance and repair of Class 5 - 8 commercial vehicles and tank trailer inspection Ability to frequently lift up to 50 lbs Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law. KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. At KAG, it's our people who make it possible to achieve our company goal as One Team Driven to Make a Difference! With expert knowledge, supportive leadership, and a strong belief in our company culture, our team exemplifies the passion, pride, and entrepreneurial spirit that help us reach our goals every day.
