Job Description Job Description LIC based Local 638 HVAC Service Company has an opening for highly skilled experienced Commercial HVAC/Refrigeration Technicians for hi-volume fast paced service department. Opportunities are available for Commercial Refrigeration and HVAC. WE ARE PROUD TO HIRE VETERANS! Responsibilities to include, but are not limited to: Maintain service and repair HVAC/Refrigeration equipment and associated systems in commercial and industrial establishments. Assess equipment and service needs of customer. Identify revenue generating opportunities; make recommendations to customer that can be immediately performed. Service and repair HVAC systems and refrigeration equipment. Possess diagnostic and troubleshooting skills. Prepare accurate daily reporting on work orders and quotes. Communicate with Dispatcher and Service department personnel. Utilize all applicable safety equipment and personal protective equipment (PPE). Exhibit courteous and helpful behavior towards customers and third parties. Qualifications & Skills: A valid clean driver's license and meet the company's motor vehicle policy. FDNY Torch Certification OSHA 30 hour and 10 hour SST Certification Be proficient with Smart Phone Usage, Knowledge of IVR usage and Retail procedures is a plus Flexible to work stand by rotation and overtime as needed VRF and VRV experience is a plus but not a requirement Benefits Offered : Medical, Dental, Vision and 401K Company Description AFGO Mechanical Services, Inc. has been in business for over 25 years and is a growing Commercial HVAC Service Company in the NYC Metropolitan Area. Our office is conveniently located in Long Island City, Queens near the N, Q Train stops. Company Description AFGO Mechanical Services, Inc. has been in business for over 25 years and is a growing Commercial HVAC Service Company in the NYC Metropolitan Area. Our office is conveniently located in Long Island City, Queens near the N, Q Train stops.
07/29/2026
Full time
Job Description Job Description LIC based Local 638 HVAC Service Company has an opening for highly skilled experienced Commercial HVAC/Refrigeration Technicians for hi-volume fast paced service department. Opportunities are available for Commercial Refrigeration and HVAC. WE ARE PROUD TO HIRE VETERANS! Responsibilities to include, but are not limited to: Maintain service and repair HVAC/Refrigeration equipment and associated systems in commercial and industrial establishments. Assess equipment and service needs of customer. Identify revenue generating opportunities; make recommendations to customer that can be immediately performed. Service and repair HVAC systems and refrigeration equipment. Possess diagnostic and troubleshooting skills. Prepare accurate daily reporting on work orders and quotes. Communicate with Dispatcher and Service department personnel. Utilize all applicable safety equipment and personal protective equipment (PPE). Exhibit courteous and helpful behavior towards customers and third parties. Qualifications & Skills: A valid clean driver's license and meet the company's motor vehicle policy. FDNY Torch Certification OSHA 30 hour and 10 hour SST Certification Be proficient with Smart Phone Usage, Knowledge of IVR usage and Retail procedures is a plus Flexible to work stand by rotation and overtime as needed VRF and VRV experience is a plus but not a requirement Benefits Offered : Medical, Dental, Vision and 401K Company Description AFGO Mechanical Services, Inc. has been in business for over 25 years and is a growing Commercial HVAC Service Company in the NYC Metropolitan Area. Our office is conveniently located in Long Island City, Queens near the N, Q Train stops. Company Description AFGO Mechanical Services, Inc. has been in business for over 25 years and is a growing Commercial HVAC Service Company in the NYC Metropolitan Area. Our office is conveniently located in Long Island City, Queens near the N, Q Train stops.
Attilio Plumbing, Heating and Cooling
Norristown, Pennsylvania
Job Description Job Description Attilio Plumbing Heating and Cooling is looking to hire an experienced Full-Time Residential HVAC Installer/Technician. Attilio is an established Plumbing Heating and Cooling Company since 1967! We wish to grow our HVAC Team and require a clean and neat looking (and working) individual with Proficient HVAC Install/Service Skills. Job Requirements: Minimum of 2 Years Experience in Residential HVAC Installations/Service High School Education or Equivalent Authorization to work in the U.S. Good Attitude with a Clean and Neat Work Appearance Background Check will be Administered Travel to homes and businesses as scheduled Determine customer concerns with their current HVAC system Inspect current HVAC systems for effectiveness and safety Perform necessary repairs and routine maintenance Install new heating, cooling, and ventilation systems Maintain accurate inventory of all equipment and HVAC resources Certification through the Environmental Protection Agency to handle refrigerants a plus! Proficient with manual and power tools Valid driver's license and reliable transportation Reliable and self-motivated Job Includes: Company Vehicle Company Uniform Commission Opportunities! 401K Benefits Paid Time Off Opportunity to grow within a fast growing Company and learn Plumbing Skills If you think you are a qualified Candidate, please apply within! Company Description We are a forward thinking Plumbing and HVAC Company. We wish to maintain and grow our very loyal and valued customer base. We believe in quality people, taking pride in one's work, and treating everyone, Customer and Employee alike, with the utmost respect and care. We're building a bigger Family at Attilio and are looking for our next Great Family Member to join ours! Come join a Local Legend and thrive with us! Company Description We are a forward thinking Plumbing and HVAC Company. We wish to maintain and grow our very loyal and valued customer base. We believe in quality people, taking pride in one's work, and treating everyone, Customer and Employee alike, with the utmost respect and care. We're building a bigger Family at Attilio and are looking for our next Great Family Member to join ours! Come join a Local Legend and thrive with us!
07/29/2026
Full time
Job Description Job Description Attilio Plumbing Heating and Cooling is looking to hire an experienced Full-Time Residential HVAC Installer/Technician. Attilio is an established Plumbing Heating and Cooling Company since 1967! We wish to grow our HVAC Team and require a clean and neat looking (and working) individual with Proficient HVAC Install/Service Skills. Job Requirements: Minimum of 2 Years Experience in Residential HVAC Installations/Service High School Education or Equivalent Authorization to work in the U.S. Good Attitude with a Clean and Neat Work Appearance Background Check will be Administered Travel to homes and businesses as scheduled Determine customer concerns with their current HVAC system Inspect current HVAC systems for effectiveness and safety Perform necessary repairs and routine maintenance Install new heating, cooling, and ventilation systems Maintain accurate inventory of all equipment and HVAC resources Certification through the Environmental Protection Agency to handle refrigerants a plus! Proficient with manual and power tools Valid driver's license and reliable transportation Reliable and self-motivated Job Includes: Company Vehicle Company Uniform Commission Opportunities! 401K Benefits Paid Time Off Opportunity to grow within a fast growing Company and learn Plumbing Skills If you think you are a qualified Candidate, please apply within! Company Description We are a forward thinking Plumbing and HVAC Company. We wish to maintain and grow our very loyal and valued customer base. We believe in quality people, taking pride in one's work, and treating everyone, Customer and Employee alike, with the utmost respect and care. We're building a bigger Family at Attilio and are looking for our next Great Family Member to join ours! Come join a Local Legend and thrive with us! Company Description We are a forward thinking Plumbing and HVAC Company. We wish to maintain and grow our very loyal and valued customer base. We believe in quality people, taking pride in one's work, and treating everyone, Customer and Employee alike, with the utmost respect and care. We're building a bigger Family at Attilio and are looking for our next Great Family Member to join ours! Come join a Local Legend and thrive with us!
Job Description Job Description Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Job Summary: Perform first class, customer focused HVAC service for our Central NJ customers. Sharing stress and load with our team of dedicated long-term technicians. We are looking for a candidate who will interact in an energetic, enthusiastic and compassionate manner Candidates who understand the fear and frustration of a customer in need and project empathy and an I'll HELP YOU vibe. Candidates with excellent knowledge of and ability to service heating systems. Air Conditioning Skills and certifications favored. Pleasant phone mannerisms and competent technology skills important. Bilingual ability will be favorably considered. Successful candidates will work in a team environment with great cohesion - Contrarians need not apply. ONLY those applicants who meet the criteria above will be considered. We are a 77-year-old family owned and managed heating, air conditioning, whole house generator and liquid energy company. Serving thousands of homeowners in Central, NJ with but one objective - TO EXCEDE OUR CUSTOMERS EXPECTATIONS! Contact Don Miller about the position, application requirements and interview scheduling. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Schedule: Monday to Friday Nights as needed Weekends as needed Experience: HVAC: 1 year (Required) License/Certification: EPA Type II (Preferred) Ability to Commute: Three Bridges, NJ (Required) Work Location: In person
07/29/2026
Full time
Job Description Job Description Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Job Summary: Perform first class, customer focused HVAC service for our Central NJ customers. Sharing stress and load with our team of dedicated long-term technicians. We are looking for a candidate who will interact in an energetic, enthusiastic and compassionate manner Candidates who understand the fear and frustration of a customer in need and project empathy and an I'll HELP YOU vibe. Candidates with excellent knowledge of and ability to service heating systems. Air Conditioning Skills and certifications favored. Pleasant phone mannerisms and competent technology skills important. Bilingual ability will be favorably considered. Successful candidates will work in a team environment with great cohesion - Contrarians need not apply. ONLY those applicants who meet the criteria above will be considered. We are a 77-year-old family owned and managed heating, air conditioning, whole house generator and liquid energy company. Serving thousands of homeowners in Central, NJ with but one objective - TO EXCEDE OUR CUSTOMERS EXPECTATIONS! Contact Don Miller about the position, application requirements and interview scheduling. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Schedule: Monday to Friday Nights as needed Weekends as needed Experience: HVAC: 1 year (Required) License/Certification: EPA Type II (Preferred) Ability to Commute: Three Bridges, NJ (Required) Work Location: In person
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Job Description Job Description A-Star Heating & Air Inc. has been a trusted leader in the home services industry since 1996, serving the Dallas-Fort Worth area with pride. We specialize in providing top-quality plumbing, electrical, heating, ventilation, and air conditioning solutions, always aiming to deliver honest and high-quality work that exceeds our clients' expectations. Summary Residential HVAC Selling Technician The Residential HVAC Selling Technician plays a vital role in delivering exceptional HVAC services-including maintenance, diagnostics, and repairs-while identifying opportunities to enhance customer comfort through system upgrades, replacements, and service agreements. This position combines technical skill with customer-focused communication to educate homeowners and provide solutions that fit their needs. Key Responsibilities Technical Service: Perform thorough maintenance, diagnostics, and repairs on residential HVAC systems including heating, cooling, and ventilation equipment. Needs Assessment: Evaluate customers' HVAC systems during service calls to identify opportunities for improvements or replacements. Proposal & Quoting: Prepare and present clear, detailed proposals and quotes that explain the benefits and value of recommended solutions. Customer Education: Inform homeowners about system operation, energy efficiency, and maintenance options to empower informed decisions. Relationship Management: Build trust with customers by providing reliable service and professional follow-up, encouraging long-term relationships. Documentation: Accurately record all service activities, sales conversations, and customer feedback using company software such as ServiceTitan . Team Collaboration: Work closely with sales and installation teams to ensure smooth handoffs and customer satisfaction throughout the service process. Qualifications & Requirements Experience: Minimum 2-3 years of residential HVAC service experience with some exposure to sales or customer-facing roles. Certification: EPA Type II or Universal Certification & AC/Refrigeration Tech Registration on TDLR is required. Skills: Strong technical knowledge of HVAC systems; excellent communication and interpersonal skills; ability to identify and act on sales opportunities with professionalism. License: Valid driver's license with a clean driving record. Physical Requirements: Able to lift heavy equipment, work in confined or elevated spaces, and perform physically demanding tasks. If you're a technically skilled HVAC professional with a knack for educating customers and closing smart sales, join our team at A-Star Air Conditioning & Plumbing and grow your career while delivering comfort to homeowners. Company Description We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar's mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations. Company Description We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar's mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.
07/29/2026
Full time
Job Description Job Description A-Star Heating & Air Inc. has been a trusted leader in the home services industry since 1996, serving the Dallas-Fort Worth area with pride. We specialize in providing top-quality plumbing, electrical, heating, ventilation, and air conditioning solutions, always aiming to deliver honest and high-quality work that exceeds our clients' expectations. Summary Residential HVAC Selling Technician The Residential HVAC Selling Technician plays a vital role in delivering exceptional HVAC services-including maintenance, diagnostics, and repairs-while identifying opportunities to enhance customer comfort through system upgrades, replacements, and service agreements. This position combines technical skill with customer-focused communication to educate homeowners and provide solutions that fit their needs. Key Responsibilities Technical Service: Perform thorough maintenance, diagnostics, and repairs on residential HVAC systems including heating, cooling, and ventilation equipment. Needs Assessment: Evaluate customers' HVAC systems during service calls to identify opportunities for improvements or replacements. Proposal & Quoting: Prepare and present clear, detailed proposals and quotes that explain the benefits and value of recommended solutions. Customer Education: Inform homeowners about system operation, energy efficiency, and maintenance options to empower informed decisions. Relationship Management: Build trust with customers by providing reliable service and professional follow-up, encouraging long-term relationships. Documentation: Accurately record all service activities, sales conversations, and customer feedback using company software such as ServiceTitan . Team Collaboration: Work closely with sales and installation teams to ensure smooth handoffs and customer satisfaction throughout the service process. Qualifications & Requirements Experience: Minimum 2-3 years of residential HVAC service experience with some exposure to sales or customer-facing roles. Certification: EPA Type II or Universal Certification & AC/Refrigeration Tech Registration on TDLR is required. Skills: Strong technical knowledge of HVAC systems; excellent communication and interpersonal skills; ability to identify and act on sales opportunities with professionalism. License: Valid driver's license with a clean driving record. Physical Requirements: Able to lift heavy equipment, work in confined or elevated spaces, and perform physically demanding tasks. If you're a technically skilled HVAC professional with a knack for educating customers and closing smart sales, join our team at A-Star Air Conditioning & Plumbing and grow your career while delivering comfort to homeowners. Company Description We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar's mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations. Company Description We specialize in providing high-quality services in plumbing, HVAC and electrical services. Our commitment to honesty and excellence drives us to deliver the best equipment and service to our valued clients. Astar's mission is to always provide HONESTY in every solution, while delivering the highest QUALITY in service and installations.
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay: up to $23.00-$31.00 per hour, based on experience 1st Shift available Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Job Description Job Description HVAC and Refrigeration Technician Position Summary Seeking a customer service-oriented individual for an on-site HVAC Refrigeration Technician role. This position involves diagnosing issues, replacing necessary parts, and providing maintenance, repair, and installation services for commercial HVAC and Refrigeration equipment. We require a strong mechanical aptitude, a solid work ethic, and core values that align with ours. Our goal is to get the right people in the "boat", to build a great and enduring company that is the leader in facilities maintenance solutions.- the CJM way! Do you view yourself as more of a problem solver than a technician? Would you like to be surrounded by a team that has your back? Do you value family as much as we do? Does facing new challenges each day excite and motivate you? Is it in your DNA to seek ongoing improvement both personally & professionally? Does the thought of doing the same thing every day make you ill? Do you hate workplace politics as much as we do? Do you hold yourself to a high standard even when no one is watching? Can you pursue perfection in your work while still having fun? Do you sit in the lawn chair and not fold like one when the pressure is on? Who we are looking for Individuals who have a passion for excellence and a commitment to serve our partners with integrity and respect, while adhering to a common set of core values. Someone who has the mechanical aptitude, drive, initiative, and the accountability to make a positive impact on our company and our partnerships. Not just an employee, but a valued member of our team who takes pride in their work and contributes to our shared vision and goals. Someone who wants the opportunity to grow, learn, and advance in their career as they help us achieve our mission to build a great and enduring company. Qualifications: 2 years of experience in the HVAC and Refrigeration repair and service field Strong mechanical aptitude and willingness to learn new trades and skills as needed. Provide solutions and perform the tasks necessary to keep our partners facilities running smoothly Ability to document detailed accounts of tasks completed through the use of our company app. Capacity to retain and apply information and skilled training Ability to handle various tasks in a fast paced high stress environment Valid drivers license and a clean driving record Must pass a background check and drug screening IF THIS SOUNDS INTERESTING TO YOU, PLEASE VISIT OUR WEBSITE TO APPLY.
07/29/2026
Full time
Job Description Job Description HVAC and Refrigeration Technician Position Summary Seeking a customer service-oriented individual for an on-site HVAC Refrigeration Technician role. This position involves diagnosing issues, replacing necessary parts, and providing maintenance, repair, and installation services for commercial HVAC and Refrigeration equipment. We require a strong mechanical aptitude, a solid work ethic, and core values that align with ours. Our goal is to get the right people in the "boat", to build a great and enduring company that is the leader in facilities maintenance solutions.- the CJM way! Do you view yourself as more of a problem solver than a technician? Would you like to be surrounded by a team that has your back? Do you value family as much as we do? Does facing new challenges each day excite and motivate you? Is it in your DNA to seek ongoing improvement both personally & professionally? Does the thought of doing the same thing every day make you ill? Do you hate workplace politics as much as we do? Do you hold yourself to a high standard even when no one is watching? Can you pursue perfection in your work while still having fun? Do you sit in the lawn chair and not fold like one when the pressure is on? Who we are looking for Individuals who have a passion for excellence and a commitment to serve our partners with integrity and respect, while adhering to a common set of core values. Someone who has the mechanical aptitude, drive, initiative, and the accountability to make a positive impact on our company and our partnerships. Not just an employee, but a valued member of our team who takes pride in their work and contributes to our shared vision and goals. Someone who wants the opportunity to grow, learn, and advance in their career as they help us achieve our mission to build a great and enduring company. Qualifications: 2 years of experience in the HVAC and Refrigeration repair and service field Strong mechanical aptitude and willingness to learn new trades and skills as needed. Provide solutions and perform the tasks necessary to keep our partners facilities running smoothly Ability to document detailed accounts of tasks completed through the use of our company app. Capacity to retain and apply information and skilled training Ability to handle various tasks in a fast paced high stress environment Valid drivers license and a clean driving record Must pass a background check and drug screening IF THIS SOUNDS INTERESTING TO YOU, PLEASE VISIT OUR WEBSITE TO APPLY.
Job Description Job Description McClain Bros Plumbing & Heating is a team oriented company. We recognize and reward talent and loyalty from our employees. We provide first class service to homeowners with education and communication for permanent repair solutions for their home's air conditioning and heating systems. We take care of our customers and our employees. This is a great place for growth and advancement. Job Title: HVAC Technician Location: Levittown, PA Employment Type: Full-Time Position Overview: We are seeking a highly skilled and dedicated HVAC Technician to join our team. The ideal candidate will be responsible for the installation, maintenance, and repair of heating, ventilation, and air conditioning (HVAC) systems for both residential and commercial clients. This role requires a deep understanding of HVAC systems, excellent troubleshooting skills, and the ability to deliver exceptional customer service. Key Responsibilities: Install, maintain, and repair HVAC systems including air conditioning units, furnaces, heat pumps, boilers, and refrigeration equipment. Conduct routine inspections and preventative maintenance on HVAC systems to ensure optimal functionality. Ensure all work is completed according to industry standards and company policies. Maintain accurate records of work performed and materials used. Required Skills and Experience: Minimum 3-5 years RESIDENTIAL service and repair experience. Clean cut appearance with a great attitude, superior work ethic and sales aptitude Clean driving record Universal EPA Certification Hand tools, cordless tools, gauges, etc. Must pass Drug Screen and Criminal Background Check Strong mechanical aptitude Proficient in using various hand tools and diagnostic equipment. Ability to lift heavy equipment and work in various environmental conditions. Excellent problem-solving skills with attention to detail. Strong communication skills to interact effectively with clients and team members. Ability to be part of on call rotation Flexibility to work overtime depending on demand Desire to make more than $80,000 a year Preferred Qualifications: EPA Certification (Type I and II) or Universal Certification. Experience with smart thermostats, ductless systems, and other advanced HVAC technologies. Knowledge of local building codes and HVAC regulations. Familiarity with HVAC maintenance and repair software or apps. Ability to service oil fired units a plus! Compensation and Benefits: Compensation will be based on experience and qualifications. We offer a comprehensive benefits package, including health insurance, paid time off, retirement plans, and opportunities for continued education and training.
07/29/2026
Full time
Job Description Job Description McClain Bros Plumbing & Heating is a team oriented company. We recognize and reward talent and loyalty from our employees. We provide first class service to homeowners with education and communication for permanent repair solutions for their home's air conditioning and heating systems. We take care of our customers and our employees. This is a great place for growth and advancement. Job Title: HVAC Technician Location: Levittown, PA Employment Type: Full-Time Position Overview: We are seeking a highly skilled and dedicated HVAC Technician to join our team. The ideal candidate will be responsible for the installation, maintenance, and repair of heating, ventilation, and air conditioning (HVAC) systems for both residential and commercial clients. This role requires a deep understanding of HVAC systems, excellent troubleshooting skills, and the ability to deliver exceptional customer service. Key Responsibilities: Install, maintain, and repair HVAC systems including air conditioning units, furnaces, heat pumps, boilers, and refrigeration equipment. Conduct routine inspections and preventative maintenance on HVAC systems to ensure optimal functionality. Ensure all work is completed according to industry standards and company policies. Maintain accurate records of work performed and materials used. Required Skills and Experience: Minimum 3-5 years RESIDENTIAL service and repair experience. Clean cut appearance with a great attitude, superior work ethic and sales aptitude Clean driving record Universal EPA Certification Hand tools, cordless tools, gauges, etc. Must pass Drug Screen and Criminal Background Check Strong mechanical aptitude Proficient in using various hand tools and diagnostic equipment. Ability to lift heavy equipment and work in various environmental conditions. Excellent problem-solving skills with attention to detail. Strong communication skills to interact effectively with clients and team members. Ability to be part of on call rotation Flexibility to work overtime depending on demand Desire to make more than $80,000 a year Preferred Qualifications: EPA Certification (Type I and II) or Universal Certification. Experience with smart thermostats, ductless systems, and other advanced HVAC technologies. Knowledge of local building codes and HVAC regulations. Familiarity with HVAC maintenance and repair software or apps. Ability to service oil fired units a plus! Compensation and Benefits: Compensation will be based on experience and qualifications. We offer a comprehensive benefits package, including health insurance, paid time off, retirement plans, and opportunities for continued education and training.
Sign-On Bonus for New Hires: up to $10,000 Pay: up to $22.93-$34.38 per hour, based on experience 3rd Shift available with $3 Shift Differential $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Sign-On Bonus for New Hires: up to $10,000 Pay: up to $22.93-$34.38 per hour, based on experience 3rd Shift available with $3 Shift Differential $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Pay Rate: $27.21 per hour, depending on experience . Shift Available: To be Discussed Shift Differential : Yes Annual Tool Allowance: Yes Additional Benefits: Choice of Health plans, (Medical, Dental and Eye) Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
07/29/2026
Full time
Pay Rate: $27.21 per hour, depending on experience . Shift Available: To be Discussed Shift Differential : Yes Annual Tool Allowance: Yes Additional Benefits: Choice of Health plans, (Medical, Dental and Eye) Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Job Description Job Description Job description Service & Maintenance Corp. 6 WARREN DRIVE, UNIT A. VERNON, NJ 07462 HAVC/R Job Description: Mechanical Services Contractor located in New Jersey is seeking Service Technicians with 5+ years of experience with commercial refrigeration and HVAC systems. Positions open for technicians servicing New York, New Jersey and Southern Connecticut metro area. Primary Job Responsibilities: Maintain, repair and troubleshoot HVAC/R equipment to include but not limited to packaged units, split systems, Walk-in boxes and ice makers a plus. Install, inspect, diagnose and correct problems in HVACR systems Inspect systems and their components (e.g. air conditioning, heating and refrigeration units, etc.) to ensure safety and identify necessary repairs and provide an ongoing program of preventive maintenance Repair or replace defective equipment, components, or wiring on heating/air- conditioning/refrigeration systems Diagnose problems and/or failures in heating/air conditioning/refrigeration systems to identify equipment and, or systems repair and replacement needs Job Requirements: Minimum 5 years' experience in HVAC Refrigeration work Commercial industry HVAC Refrigeration background Comply with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area. Applicants must be proficient with the use of tablets and smart phones EPA Certification (universal and 608) - and advanced understanding of electricity, wiring, and control circuits (all equipment), to perform maintenance and repairs Communicate thoroughly and effectively with dispatch teams and account managers Maintain and be accountable for material and supply requisition as needed for each job, including online purchase order execution Ability to safely lift 50 pounds and climb ladders Customer service skills with the ability to build strong relationships with internal and external customers Advanced troubleshooting ability and mechanical skills F60 FDNY Torch Ops a plus G60 Torch Flammable Gases a plus High school diploma or GED Valid and clean driver's license Union training or NATE certifications is a plus Off street company vehicle parking a must What We Offer: Competitive hourly salary, including overtime and stand-by Weekly pay with direct deposit Company supplied vehicle with gas card, iPhone & iPad Paid vacation and holidays Union benefits and a team environment Job Type: Full-time Job Type: Full-time Pay: $60,000.00 - $125,000.00 per year COVID-19 considerations: All employees are issued proper PPE equipment to perform the job Company Description Service & Maintenance Corp. (SAMCO) is a second generation family owned company serving the NY, NJ and CT metro area. We service commercial HVAC/R, from small business to major S&P 500 & 600 companies. Our technicians are part of our team and we work for commercial restaurants, retail stores, care facilities and data centers as well as other opportunities. Please reach out to SAMCO if you have the experience we seek and join our growing team. Company Description Service & Maintenance Corp. (SAMCO) is a second generation family owned company serving the NY, NJ and CT metro area. We service commercial HVAC/R, from small business to major S&P 500 & 600 companies. Our technicians are part of our team and we work for commercial restaurants, retail stores, care facilities and data centers as well as other opportunities. Please reach out to SAMCO if you have the experience we seek and join our growing team.
07/29/2026
Full time
Job Description Job Description Job description Service & Maintenance Corp. 6 WARREN DRIVE, UNIT A. VERNON, NJ 07462 HAVC/R Job Description: Mechanical Services Contractor located in New Jersey is seeking Service Technicians with 5+ years of experience with commercial refrigeration and HVAC systems. Positions open for technicians servicing New York, New Jersey and Southern Connecticut metro area. Primary Job Responsibilities: Maintain, repair and troubleshoot HVAC/R equipment to include but not limited to packaged units, split systems, Walk-in boxes and ice makers a plus. Install, inspect, diagnose and correct problems in HVACR systems Inspect systems and their components (e.g. air conditioning, heating and refrigeration units, etc.) to ensure safety and identify necessary repairs and provide an ongoing program of preventive maintenance Repair or replace defective equipment, components, or wiring on heating/air- conditioning/refrigeration systems Diagnose problems and/or failures in heating/air conditioning/refrigeration systems to identify equipment and, or systems repair and replacement needs Job Requirements: Minimum 5 years' experience in HVAC Refrigeration work Commercial industry HVAC Refrigeration background Comply with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area. Applicants must be proficient with the use of tablets and smart phones EPA Certification (universal and 608) - and advanced understanding of electricity, wiring, and control circuits (all equipment), to perform maintenance and repairs Communicate thoroughly and effectively with dispatch teams and account managers Maintain and be accountable for material and supply requisition as needed for each job, including online purchase order execution Ability to safely lift 50 pounds and climb ladders Customer service skills with the ability to build strong relationships with internal and external customers Advanced troubleshooting ability and mechanical skills F60 FDNY Torch Ops a plus G60 Torch Flammable Gases a plus High school diploma or GED Valid and clean driver's license Union training or NATE certifications is a plus Off street company vehicle parking a must What We Offer: Competitive hourly salary, including overtime and stand-by Weekly pay with direct deposit Company supplied vehicle with gas card, iPhone & iPad Paid vacation and holidays Union benefits and a team environment Job Type: Full-time Job Type: Full-time Pay: $60,000.00 - $125,000.00 per year COVID-19 considerations: All employees are issued proper PPE equipment to perform the job Company Description Service & Maintenance Corp. (SAMCO) is a second generation family owned company serving the NY, NJ and CT metro area. We service commercial HVAC/R, from small business to major S&P 500 & 600 companies. Our technicians are part of our team and we work for commercial restaurants, retail stores, care facilities and data centers as well as other opportunities. Please reach out to SAMCO if you have the experience we seek and join our growing team. Company Description Service & Maintenance Corp. (SAMCO) is a second generation family owned company serving the NY, NJ and CT metro area. We service commercial HVAC/R, from small business to major S&P 500 & 600 companies. Our technicians are part of our team and we work for commercial restaurants, retail stores, care facilities and data centers as well as other opportunities. Please reach out to SAMCO if you have the experience we seek and join our growing team.
Job Description Job Description Polk Mechanical is currently hiring a HVAC Chiller Technician I came across your resume on Indeed and wanted to reach out about an exciting opportunity for a Chiller Technician position at Polk Mechanical Company LLC. As a key member of our HVAC services team, you will play a critical role in estimating and supporting projects focused on chiller systems. Your expertise will help diagnose, repair, maintain, and upgrade a wide range of HVAC equipment. This position is ideal for a problem-solver and skilled technician who thrives in a fast-paced, customer-focused environment. Key Responsibilities Technical Troubleshooting: Accurately identify and resolve HVAC system issues, ensuring all failed components are addressed. System Expertise: Work with air- and water-cooled HVAC equipment, including VFDs and various starter types. Hydronic Systems: Diagnose and resolve issues with system pumps and water balance. Cooling Towers: Troubleshoot cooling towers and evaporative condensers effectively. Microprocessor Knowledge: Apply working knowledge of York, Trane, and Carrier microprocessors. Team Support: Assist with dispatch service calls during peak demand periods. Professional Communication: Maintain clear and respectful communication with customers and internal teams. Documentation: Complete and submit all required paperwork accurately and on time. Independent Work: Take ownership of tasks, set goals, and follow through with urgency. Travel: Willingness to travel within the greater Dallas area as needed. Safety Compliance: Adhere to all safety protocols, including safe driving practices. Flexibility: Adapt to a dynamic and flexible work schedule. Company Description TriplePoint is a high-growth, private equity-backed platform in the mechanical and industrial construction space. With a strong pipeline of acquisitions and continued expansion, we are building the industry leader in integrated construction services. Our team thrives in a high-performance, fast-paced environment where accountability, precision, and execution excellence are non-negotiable. Company Description TriplePoint is a high-growth, private equity-backed platform in the mechanical and industrial construction space. With a strong pipeline of acquisitions and continued expansion, we are building the industry leader in integrated construction services. Our team thrives in a high-performance, fast-paced environment where accountability, precision, and execution excellence are non-negotiable.
07/29/2026
Full time
Job Description Job Description Polk Mechanical is currently hiring a HVAC Chiller Technician I came across your resume on Indeed and wanted to reach out about an exciting opportunity for a Chiller Technician position at Polk Mechanical Company LLC. As a key member of our HVAC services team, you will play a critical role in estimating and supporting projects focused on chiller systems. Your expertise will help diagnose, repair, maintain, and upgrade a wide range of HVAC equipment. This position is ideal for a problem-solver and skilled technician who thrives in a fast-paced, customer-focused environment. Key Responsibilities Technical Troubleshooting: Accurately identify and resolve HVAC system issues, ensuring all failed components are addressed. System Expertise: Work with air- and water-cooled HVAC equipment, including VFDs and various starter types. Hydronic Systems: Diagnose and resolve issues with system pumps and water balance. Cooling Towers: Troubleshoot cooling towers and evaporative condensers effectively. Microprocessor Knowledge: Apply working knowledge of York, Trane, and Carrier microprocessors. Team Support: Assist with dispatch service calls during peak demand periods. Professional Communication: Maintain clear and respectful communication with customers and internal teams. Documentation: Complete and submit all required paperwork accurately and on time. Independent Work: Take ownership of tasks, set goals, and follow through with urgency. Travel: Willingness to travel within the greater Dallas area as needed. Safety Compliance: Adhere to all safety protocols, including safe driving practices. Flexibility: Adapt to a dynamic and flexible work schedule. Company Description TriplePoint is a high-growth, private equity-backed platform in the mechanical and industrial construction space. With a strong pipeline of acquisitions and continued expansion, we are building the industry leader in integrated construction services. Our team thrives in a high-performance, fast-paced environment where accountability, precision, and execution excellence are non-negotiable. Company Description TriplePoint is a high-growth, private equity-backed platform in the mechanical and industrial construction space. With a strong pipeline of acquisitions and continued expansion, we are building the industry leader in integrated construction services. Our team thrives in a high-performance, fast-paced environment where accountability, precision, and execution excellence are non-negotiable.
Engel Air Conditioning corp
Feasterville Trevose, Pennsylvania
Job Description Job Description Now Hiring: HVAC Technician Location: Bucks County, Pennsylvania / Engel Air Conditioning Corp Job Type: Full-Time About Us: We are a growing, customer-focused HVAC company committed to delivering reliable heating, cooling, and ventilation solutions. Our team values professionalism, quality workmanship, and excellent customer service. Position Overview: We are seeking a skilled and motivated HVAC Technician to join our team. The ideal candidate will be responsible for installing, maintaining, and repairing HVAC systems while ensuring top-tier service for our customers. Responsibilities: Install, inspect, maintain, and repair HVAC systems and components Diagnose issues and provide effective solutions Perform routine preventative maintenance Ensure compliance with safety standards and regulations Communicate clearly with customers about services and recommendations Maintain accurate service records and documentation Qualifications: Proven experience as an HVAC technician (3+ years) EPA Certification required Strong troubleshooting and problem-solving skills Ability to work independently and as part of a team Valid driver's license and clean driving record Background check Strong customer service and communication skills Company Description Family-owned since 1975. Specializing in residential heating and air conditioning. Company Description Family-owned since 1975. Specializing in residential heating and air conditioning.
07/29/2026
Full time
Job Description Job Description Now Hiring: HVAC Technician Location: Bucks County, Pennsylvania / Engel Air Conditioning Corp Job Type: Full-Time About Us: We are a growing, customer-focused HVAC company committed to delivering reliable heating, cooling, and ventilation solutions. Our team values professionalism, quality workmanship, and excellent customer service. Position Overview: We are seeking a skilled and motivated HVAC Technician to join our team. The ideal candidate will be responsible for installing, maintaining, and repairing HVAC systems while ensuring top-tier service for our customers. Responsibilities: Install, inspect, maintain, and repair HVAC systems and components Diagnose issues and provide effective solutions Perform routine preventative maintenance Ensure compliance with safety standards and regulations Communicate clearly with customers about services and recommendations Maintain accurate service records and documentation Qualifications: Proven experience as an HVAC technician (3+ years) EPA Certification required Strong troubleshooting and problem-solving skills Ability to work independently and as part of a team Valid driver's license and clean driving record Background check Strong customer service and communication skills Company Description Family-owned since 1975. Specializing in residential heating and air conditioning. Company Description Family-owned since 1975. Specializing in residential heating and air conditioning.
FS PLUMBING HEATING AND GENERAL CON
Freehold, New Jersey
Job Description Job Description Benefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Qualifications: Past experience as an HVAC service technician or comparable education Valid Drivers License EPA Certification Experience with operation and maintenance of Furnace, AC Condensers, heat pumps, air handlers, and Mini Split technology Ability to climb ladders, crawl, and lift 40 pounds
07/29/2026
Full time
Job Description Job Description Benefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Qualifications: Past experience as an HVAC service technician or comparable education Valid Drivers License EPA Certification Experience with operation and maintenance of Furnace, AC Condensers, heat pumps, air handlers, and Mini Split technology Ability to climb ladders, crawl, and lift 40 pounds
Job Description Job Description Benefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Qualifications: Past experience as an HVAC service technician or comparable education Valid Drivers License EPA Certification Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems Ability to climb ladders, crawl, and lift 40 pounds
07/29/2026
Full time
Job Description Job Description Benefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Qualifications: Past experience as an HVAC service technician or comparable education Valid Drivers License EPA Certification Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems Ability to climb ladders, crawl, and lift 40 pounds
Job Description Job Description Benefits/Perks Overtime hours Competitive Compensation Career Advancement Opportunities 401k plan Company Insurance Job Summary: Exciting company with endless growth opportunities for the right candidate. We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Compensation based on experience $30-$65 per hour. Responsibilities: Perform startup and commissioning of new systems incl RTU, VRF, splits, WSHP, DOAS, ERV Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Perform troubleshooting of various equipment Diagnose problems and performance issues with equipment Work closely with manufactures and tech support Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Qualifications: Past experience as an HVAC service technician for min 5 years Valid Drivers License (Clean) OSHA 30 & SST Certification FDNY G60 & F60 EPA Certification Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems Ability to climb ladders, crawl, and lift 40 pounds Certification for working on Mitsubishi, Daikin, Aaon, LG & other manufactures a plus
07/29/2026
Full time
Job Description Job Description Benefits/Perks Overtime hours Competitive Compensation Career Advancement Opportunities 401k plan Company Insurance Job Summary: Exciting company with endless growth opportunities for the right candidate. We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Compensation based on experience $30-$65 per hour. Responsibilities: Perform startup and commissioning of new systems incl RTU, VRF, splits, WSHP, DOAS, ERV Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Perform troubleshooting of various equipment Diagnose problems and performance issues with equipment Work closely with manufactures and tech support Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Qualifications: Past experience as an HVAC service technician for min 5 years Valid Drivers License (Clean) OSHA 30 & SST Certification FDNY G60 & F60 EPA Certification Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems Ability to climb ladders, crawl, and lift 40 pounds Certification for working on Mitsubishi, Daikin, Aaon, LG & other manufactures a plus
Job Description Job Description Benefits/Perks Competitive Compensation Career Advancement Opportunities Union Local 27 HVAC Sheetmetal Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. Looking for 10 years experience or more. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Be able to run a crew if necessary Qualifications: Past experience as an HVAC service technician or comparable education Valid Drivers License EPA Certification Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems Ability to climb ladders, crawl, and lift 40 pounds
07/29/2026
Full time
Job Description Job Description Benefits/Perks Competitive Compensation Career Advancement Opportunities Union Local 27 HVAC Sheetmetal Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. Looking for 10 years experience or more. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Be able to run a crew if necessary Qualifications: Past experience as an HVAC service technician or comparable education Valid Drivers License EPA Certification Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems Ability to climb ladders, crawl, and lift 40 pounds
Job Description Job Description AC Wizard is hiring. We are a smaller family owned residential service company and we are in the process of growing. We are looking for loyal, highly motivated individuals to join our team. This is a full time position with the opportunity for advancement to management. We will need to have a field supervisor soon and would prefer that person to come from within the company. We do 75% home warranty service, 25% retail residential service. So, customer service skills are at the top of the list for our team. We have multiple spots available and we are willing to train the right individuals, so experience is not a must but preferred. We offer a matching 401K retirement plan, paid vacation, paid training, uniforms, company vehicle, tool accounts, and a strong team environment. We are all equal and we help each other succeed as a team. We do require you to have a clean driving record(our insurance is strict on this), be able to pass a drug screening(again, due to insurance), be able to be on call(our on call is very easy), and have your TDLR registration and EPA Universal card. If you think you would be a great fit with our team, please apply with a copy of your resume and we will contact you for an interview. Please don't waste your time or ours if you don't plan on showing up for the interview. I'm sure you value your time as much as I do mine, so that would be appreciated. I look forward to hearing from you and working with you! Thanks for taking the time to consider us. -AK Kuture, Owner Company Description We are a small sized residential HVAC company. We treat our customers the way we would like to be treated. Company Description We are a small sized residential HVAC company. We treat our customers the way we would like to be treated.
07/29/2026
Full time
Job Description Job Description AC Wizard is hiring. We are a smaller family owned residential service company and we are in the process of growing. We are looking for loyal, highly motivated individuals to join our team. This is a full time position with the opportunity for advancement to management. We will need to have a field supervisor soon and would prefer that person to come from within the company. We do 75% home warranty service, 25% retail residential service. So, customer service skills are at the top of the list for our team. We have multiple spots available and we are willing to train the right individuals, so experience is not a must but preferred. We offer a matching 401K retirement plan, paid vacation, paid training, uniforms, company vehicle, tool accounts, and a strong team environment. We are all equal and we help each other succeed as a team. We do require you to have a clean driving record(our insurance is strict on this), be able to pass a drug screening(again, due to insurance), be able to be on call(our on call is very easy), and have your TDLR registration and EPA Universal card. If you think you would be a great fit with our team, please apply with a copy of your resume and we will contact you for an interview. Please don't waste your time or ours if you don't plan on showing up for the interview. I'm sure you value your time as much as I do mine, so that would be appreciated. I look forward to hearing from you and working with you! Thanks for taking the time to consider us. -AK Kuture, Owner Company Description We are a small sized residential HVAC company. We treat our customers the way we would like to be treated. Company Description We are a small sized residential HVAC company. We treat our customers the way we would like to be treated.
Job Description Job Description We are looking for an HVAC Technician to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: Install new heating, ventilation, and air conditioning systems Inspect, diagnose, and perform equipment repairs and replacements Perform routine preventative maintenance Adhere to all safety policies and procedures Qualifications: Previous experience in HVAC or other related fields Familiarity with HVAC wiring diagrams Strong problem solving and critical thinking skills Familiar with VRF systems, mini split systems Company Description We are based on Long Island and work in Nassua County, Queens, Brooklyn, and Manhattan. We are a mid size company - working on residential and commercial projects. We have a reputation as being outstanding in our field. Looking for a responsible, full time experienced technician interested in working for a great company! Company Description We are based on Long Island and work in Nassua County, Queens, Brooklyn, and Manhattan. We are a mid size company - working on residential and commercial projects. We have a reputation as being outstanding in our field. Looking for a responsible, full time experienced technician interested in working for a great company!
07/29/2026
Full time
Job Description Job Description We are looking for an HVAC Technician to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: Install new heating, ventilation, and air conditioning systems Inspect, diagnose, and perform equipment repairs and replacements Perform routine preventative maintenance Adhere to all safety policies and procedures Qualifications: Previous experience in HVAC or other related fields Familiarity with HVAC wiring diagrams Strong problem solving and critical thinking skills Familiar with VRF systems, mini split systems Company Description We are based on Long Island and work in Nassua County, Queens, Brooklyn, and Manhattan. We are a mid size company - working on residential and commercial projects. We have a reputation as being outstanding in our field. Looking for a responsible, full time experienced technician interested in working for a great company! Company Description We are based on Long Island and work in Nassua County, Queens, Brooklyn, and Manhattan. We are a mid size company - working on residential and commercial projects. We have a reputation as being outstanding in our field. Looking for a responsible, full time experienced technician interested in working for a great company!
Job Description Job Description Green Ductors is seeking motivated and reliable HVAC Technicians to join our growing team. This is a strong opportunity for individuals looking to build a long term career in the HVAC industry while gaining hands-on experience and developing technical skills in a structured environment. What You'll Do Perform HVAC installations, maintenance, and basic repairs Work alongside experienced technicians on residential and commercial projects Follow all safety procedures and quality standards Support daily operations and contribute to team efficiency Continuously develop technical knowledge and field experience Requirements Candidates should demonstrate a strong interest in the HVAC industry. Prior experience in the field (minimum 1 year) is preferred, and an engineering or technical background is considered a plus. A valid driver's license and intermediate English proficiency are required. We are looking for individuals with a strong work ethic, reliability, and willingness to learn and grow. What We Offer Competitive starting pay ($20/hour+) Clear path for career growth and advancement Stable, full-time employment Supportive and professional team environment Our Hiring Process Initial application submission Initial phone or email screening Document collection (Driver's License, Work Authorization, Medical Form) Final interview (in-person or virtual) How to Apply Please send your resume to:
07/29/2026
Full time
Job Description Job Description Green Ductors is seeking motivated and reliable HVAC Technicians to join our growing team. This is a strong opportunity for individuals looking to build a long term career in the HVAC industry while gaining hands-on experience and developing technical skills in a structured environment. What You'll Do Perform HVAC installations, maintenance, and basic repairs Work alongside experienced technicians on residential and commercial projects Follow all safety procedures and quality standards Support daily operations and contribute to team efficiency Continuously develop technical knowledge and field experience Requirements Candidates should demonstrate a strong interest in the HVAC industry. Prior experience in the field (minimum 1 year) is preferred, and an engineering or technical background is considered a plus. A valid driver's license and intermediate English proficiency are required. We are looking for individuals with a strong work ethic, reliability, and willingness to learn and grow. What We Offer Competitive starting pay ($20/hour+) Clear path for career growth and advancement Stable, full-time employment Supportive and professional team environment Our Hiring Process Initial application submission Initial phone or email screening Document collection (Driver's License, Work Authorization, Medical Form) Final interview (in-person or virtual) How to Apply Please send your resume to:
