Job Description Job Description Job Title: Maintenance Technician - Welder/Pipefitter Department: Maintenance Reports To: Maintenance Supervisor Position Summary The Welder/pipefitter is responsible for performing high-quality welding, fabrication, and metal repair work to support plant operations. This role works closely with the Maintenance Supervisor, Maintenance Technicians, and Production teams to ensure equipment reliability, assist with project installations, and maintain safe mechanical systems across the facility. Key Responsibilities Perform MIG, TIG, and stick welding on stainless steel, carbon steel, and other metals commonly used in chemical processing equipment. Fabricate, modify, and repair tanks, piping, structural supports, platforms, and other plant components. Follow detailed drawings, weld procedures, and engineering specifications to complete work safely and accurately. Assist with installation, maintenance, and troubleshooting of mechanical systems, including pumps, valves, and piping assemblies. Conduct inspections of welds, equipment, and fabricated components to ensure quality and compliance with safety and industry standards. Collaborate with the Engineering Manager on project planning, material needs, and scope of work. Safely operate cutting torches, grinders, saws, and other fabrication tools. Maintain a clean, organized, and safe work area while adhering to all plant safety policies, including PPE requirements and chemical handling procedures. Participate in preventive maintenance activities and support small capital projects as assigned. Qualifications High school diploma or GED required; technical or trade school certification preferred. 2+ years of welding and pipefitting experience in industrial, manufacturing, or maintenance environments (chemical industry experience a plus). Proficiency in MIG, TIG, and stick welding techniques as well as both butt weld and socket weld joints. Ability to follow conceptual drawings to pull required measurements and calculate all fitting take-outs and dimensions. Knowledge of pipefitting and metal fabrication practices. Familiarity with safety standards in industrial or chemical environments (OSHA, hot-work permits, LOTO, etc.). Strong mechanical aptitude and problem-solving skills. Ability to lift up to 50 lbs and work in varying plant conditions (heat, confined spaces, elevated platforms).
07/26/2026
Full time
Job Description Job Description Job Title: Maintenance Technician - Welder/Pipefitter Department: Maintenance Reports To: Maintenance Supervisor Position Summary The Welder/pipefitter is responsible for performing high-quality welding, fabrication, and metal repair work to support plant operations. This role works closely with the Maintenance Supervisor, Maintenance Technicians, and Production teams to ensure equipment reliability, assist with project installations, and maintain safe mechanical systems across the facility. Key Responsibilities Perform MIG, TIG, and stick welding on stainless steel, carbon steel, and other metals commonly used in chemical processing equipment. Fabricate, modify, and repair tanks, piping, structural supports, platforms, and other plant components. Follow detailed drawings, weld procedures, and engineering specifications to complete work safely and accurately. Assist with installation, maintenance, and troubleshooting of mechanical systems, including pumps, valves, and piping assemblies. Conduct inspections of welds, equipment, and fabricated components to ensure quality and compliance with safety and industry standards. Collaborate with the Engineering Manager on project planning, material needs, and scope of work. Safely operate cutting torches, grinders, saws, and other fabrication tools. Maintain a clean, organized, and safe work area while adhering to all plant safety policies, including PPE requirements and chemical handling procedures. Participate in preventive maintenance activities and support small capital projects as assigned. Qualifications High school diploma or GED required; technical or trade school certification preferred. 2+ years of welding and pipefitting experience in industrial, manufacturing, or maintenance environments (chemical industry experience a plus). Proficiency in MIG, TIG, and stick welding techniques as well as both butt weld and socket weld joints. Ability to follow conceptual drawings to pull required measurements and calculate all fitting take-outs and dimensions. Knowledge of pipefitting and metal fabrication practices. Familiarity with safety standards in industrial or chemical environments (OSHA, hot-work permits, LOTO, etc.). Strong mechanical aptitude and problem-solving skills. Ability to lift up to 50 lbs and work in varying plant conditions (heat, confined spaces, elevated platforms).
Job Description Job Description At StaffBuildersHR, we connect great people with great companies! With weekly pay, no fees, and real opportunities, we make it easy for you to find meaningful work and grow your career. We're partnering with a well-established steel company in the Lakeland, FL area that is seeking Welder/Fitters . In this role, you'll be fitting, aligning, and assembling structural steel components in a fabrication shop environment. This role requires the ability to read and interpret blueprints and welding symbols, use hand and power tools, and work closely with welders and quality control to ensure all assemblies meet project specifications and quality standards. What Makes the Job Great Excellent Company Culture Advancement Opportunities Safety and Attendance Incentives What You'll Be Doing Read and interpret shop drawings, blueprints, and welding symbols to determine proper layout and assembly of structural steel components. Identify CNC-scribed markings and use them to accurately position plates, beams, columns, and other structural members. Measure, mark, align, and fit steel components according to specifications and tolerances. Use hand tools, measuring devices, clamps, and fitting equipment to properly secure components. Tack weld fitted components to hold assemblies in place for final welding. Work closely with Quality Control (QC) to ensure fitted assemblies meet quality and safety standards prior to welding. Coordinate with welders to release approved assemblies for final weld completion. Rotate through different stages of the fabrication and fitting process as needed to support workflow and production schedules. Maintain a clean, safe, and organized work area in compliance with safety regulations. Who We're Looking For Previous experience as a structural steel fitter or similar fabrication role preferred Ability to read and interpret blueprints, shop drawings, and welding symbols Strong understanding of structural steel components and fabrication processes Proficiency using measuring tools (tape measure, squares, levels) and fitting tools Basic welding knowledge and ability to perform tack welds Attention to detail with a focus on accuracy and quality Ability to work independently and as part of a team in a fast-paced shop environment Commitment to workplace safety and quality standards What You Can Expect $22.00 - $28.00/hr depending on experience and test results Regular schedule of Monday - Friday, 7:00am - 4:30pm Occasional Saturdays Life insurance Short-term disability insurance Supplemental insurance options 401(k) matching plan Employee assistance program Vacation and personal days Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile.
07/26/2026
Full time
Job Description Job Description At StaffBuildersHR, we connect great people with great companies! With weekly pay, no fees, and real opportunities, we make it easy for you to find meaningful work and grow your career. We're partnering with a well-established steel company in the Lakeland, FL area that is seeking Welder/Fitters . In this role, you'll be fitting, aligning, and assembling structural steel components in a fabrication shop environment. This role requires the ability to read and interpret blueprints and welding symbols, use hand and power tools, and work closely with welders and quality control to ensure all assemblies meet project specifications and quality standards. What Makes the Job Great Excellent Company Culture Advancement Opportunities Safety and Attendance Incentives What You'll Be Doing Read and interpret shop drawings, blueprints, and welding symbols to determine proper layout and assembly of structural steel components. Identify CNC-scribed markings and use them to accurately position plates, beams, columns, and other structural members. Measure, mark, align, and fit steel components according to specifications and tolerances. Use hand tools, measuring devices, clamps, and fitting equipment to properly secure components. Tack weld fitted components to hold assemblies in place for final welding. Work closely with Quality Control (QC) to ensure fitted assemblies meet quality and safety standards prior to welding. Coordinate with welders to release approved assemblies for final weld completion. Rotate through different stages of the fabrication and fitting process as needed to support workflow and production schedules. Maintain a clean, safe, and organized work area in compliance with safety regulations. Who We're Looking For Previous experience as a structural steel fitter or similar fabrication role preferred Ability to read and interpret blueprints, shop drawings, and welding symbols Strong understanding of structural steel components and fabrication processes Proficiency using measuring tools (tape measure, squares, levels) and fitting tools Basic welding knowledge and ability to perform tack welds Attention to detail with a focus on accuracy and quality Ability to work independently and as part of a team in a fast-paced shop environment Commitment to workplace safety and quality standards What You Can Expect $22.00 - $28.00/hr depending on experience and test results Regular schedule of Monday - Friday, 7:00am - 4:30pm Occasional Saturdays Life insurance Short-term disability insurance Supplemental insurance options 401(k) matching plan Employee assistance program Vacation and personal days Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile.
Job Description Job Description Now Hiring Welders - Multiple Openings! Tulsa, OK We're hiring skilled welders for several full-time fabrication positions in the Tulsa area. If you have experience with MIG, TIG, Flux Core, structural welding, fitting, or blueprint reading , we have opportunities to match your skills. Current Openings: Structural Welder TIG Welder Structural Welder/Fitter Header Welder What You'll Do Perform MIG, TIG, and Flux Core welding on structural steel, pipe, and industrial components Read and interpret blueprints, weld symbols, and fabrication drawings Fit, assemble, and weld components to specification Inspect completed welds for quality and accuracy Operate grinders, saws, measuring tools, cranes, and other fabrication equipment Maintain a safe, organized work area What We're Looking For Experience with MIG, TIG, and/or Flux Core welding Ability to read blueprints and welding symbols Strong measuring and fabrication skills Reliable attendance and attention to detail Ability to pass a weld test (position dependent) Why Join Us? Full-time, long-term opportunities Multiple shifts available Stable fabrication shops Career growth opportunities Competitive pay based on experience Whether your background is structural steel, industrial fabrication, pipe welding, or pressure vessel work, we'd love to hear from you. Apply today and we'll match you with the welding position that best fits your experience. If Interested, APPLY NOW at Company Description "At Accent Staffing, we unite top talent with exceptional companies, forming strong alliances for mutual success. Our honest, innovative, and personalized approach fosters growth for businesses and individuals, alike paving the way for a better future." Company Description "At Accent Staffing, we unite top talent with exceptional companies, forming strong alliances for mutual success. Our honest, innovative, and personalized approach fosters growth for businesses and individuals, alike paving the way for a better future."
07/26/2026
Full time
Job Description Job Description Now Hiring Welders - Multiple Openings! Tulsa, OK We're hiring skilled welders for several full-time fabrication positions in the Tulsa area. If you have experience with MIG, TIG, Flux Core, structural welding, fitting, or blueprint reading , we have opportunities to match your skills. Current Openings: Structural Welder TIG Welder Structural Welder/Fitter Header Welder What You'll Do Perform MIG, TIG, and Flux Core welding on structural steel, pipe, and industrial components Read and interpret blueprints, weld symbols, and fabrication drawings Fit, assemble, and weld components to specification Inspect completed welds for quality and accuracy Operate grinders, saws, measuring tools, cranes, and other fabrication equipment Maintain a safe, organized work area What We're Looking For Experience with MIG, TIG, and/or Flux Core welding Ability to read blueprints and welding symbols Strong measuring and fabrication skills Reliable attendance and attention to detail Ability to pass a weld test (position dependent) Why Join Us? Full-time, long-term opportunities Multiple shifts available Stable fabrication shops Career growth opportunities Competitive pay based on experience Whether your background is structural steel, industrial fabrication, pipe welding, or pressure vessel work, we'd love to hear from you. Apply today and we'll match you with the welding position that best fits your experience. If Interested, APPLY NOW at Company Description "At Accent Staffing, we unite top talent with exceptional companies, forming strong alliances for mutual success. Our honest, innovative, and personalized approach fosters growth for businesses and individuals, alike paving the way for a better future." Company Description "At Accent Staffing, we unite top talent with exceptional companies, forming strong alliances for mutual success. Our honest, innovative, and personalized approach fosters growth for businesses and individuals, alike paving the way for a better future."
Job Description Job Description Custom Architectural Welder & Fabricator - Premium Stairs, Railings & Metalwork Location: Nashville, TN Area Pay: $25-$40/hr based on experience (with overtime + skill-based bonuses - consistent full-time hours available!) We're growing! With a brand-new shop expansion underway, we're adding 2-3 more talented team members to handle our increasing volume of high-end, showcase-quality projects. Think stunning floating staircases, elegant spiral and mono-stringer designs, sleek glass and cable railings, ornate metal railings, and one-of-a-kind architectural metal features for luxury residences and upscale commercial builds. What You'll Do Day-to-Day: - Perform precise MIG welding (short-arc and spray) on mild steel, stainless, and aluminum for railings, stringers, and custom pieces - Assemble, fit, tack, and complete weldments using detailed blueprints or shop drawings - Grind, smooth, and prepare surfaces for flawless powder coat or mirror-polish finishes - Layout and build intricate angles, curves, radii, and complex geometries for stairs and railings - Run essential shop machinery: shear, press brake, ironworker, band saws, and standard fab tools - Handle occasional site visits for measurements, deliveries, or installs (field/construction background is a bonus) Must-Have Skills & Traits: - Solid track record in custom or architectural welding/fabrication (experience with stairs & railings is a big plus) - Clean, high-quality MIG beads on steel; stainless and aluminum a big plus - consistency matters - Confident blueprint reading and precise layout for challenging angles and measurements - Dependable, focused on details, professional attitude, and strong work ethic (show up on time, ready every day) Skills That Set You Apart (and Boost Your Rate/Priority): - TIG experience on stainless or aluminum and other exotic metals - Deep understanding of stair design - floating systems, mono-stringers, complex geometry - Real-world install experience (we handle our own field installs) - Woodworking knowledge or ability to assemble metal/wood treads - we run an in-house wood shop, so if you're primarily a welder but open to helping out with wood tasks during slower fab periods, that's perfect too! - Bilingual (English/Spanish) - Hablamos español y damos la bienvenida a todos! What You Get: - Top-tier competitive pay, direct deposit on a weekly basis - Paid holidays (after 90 days) - 1 week paid vacation (after 1 year) - Steady, year-round work with no seasonal slowdowns - Team-oriented shop that values quality craftsmanship and pride in every project Not fully at senior/lead level yet? No problem - we're also bringing on fitters, finishers/grinders, install assistants, and wood shop helpers . Please mention "Helper/Entry-Level Position" when you apply. Ready to Join? Send your resume + a few clear phone pics of your strongest custom stair, railing, or architectural metal projects you have availoable. We're hiring right away and excited to grow the team! Se habla español - everyone is welcome! If you love nailing perfect welds, tackling tricky stair geometries, and creating pieces that turn heads in luxury homes, let's build something amazing together. Apply today! Company Description Metal Solutions specializes in crafting custom metal pieces that elevate your space. From handrails and stairs that offer both beauty and functionality, to eye-catching signage and unique metalwork, we design and fabricate pieces that are tailored to your vision. Our team of skilled craftsmen and designers work with you from concept to creation, ensuring that every detail is perfect. We take pride in using only the highest quality materials to ensure that your metalwork is both visually stunning and structurally sound. We understand that attention to detail is paramount. That's why we take the time to work closely with you to understand your unique vision and preferences, and ensure that every detail is carefully considered and executed. From intricate designs and patterns to precise measurements and finishes, our team of skilled craftsmen and designers are dedicated to ensuring that your custom metal piece is flawless. Whether you're looking to enhance the aesthetic of your business or add a touch of elegance to your home, we're dedicated to bringing your ideas to life in metal. Company Description Metal Solutions specializes in crafting custom metal pieces that elevate your space. From handrails and stairs that offer both beauty and functionality, to eye-catching signage and unique metalwork, we design and fabricate pieces that are tailored to your vision. Our team of skilled craftsmen and designers work with you from concept to creation, ensuring that every detail is perfect. We take pride in using only the highest quality materials to ensure that your metalwork is both visually stunning and structurally sound. We understand that attention to detail is paramount. That's why we take the time to work closely with you to understand your unique vision and preferences, and ensure that every detail is carefully considered and executed. From intricate designs and patterns to precise measurements and finishes, our team of skilled craftsmen and designers are dedicated to ensuring that your custom metal piece is flawless. Whether you're looking to enhance the aesthetic of your business or add a touch of elegance to your home, we're dedicated to bringing your ideas to life in metal.
07/26/2026
Full time
Job Description Job Description Custom Architectural Welder & Fabricator - Premium Stairs, Railings & Metalwork Location: Nashville, TN Area Pay: $25-$40/hr based on experience (with overtime + skill-based bonuses - consistent full-time hours available!) We're growing! With a brand-new shop expansion underway, we're adding 2-3 more talented team members to handle our increasing volume of high-end, showcase-quality projects. Think stunning floating staircases, elegant spiral and mono-stringer designs, sleek glass and cable railings, ornate metal railings, and one-of-a-kind architectural metal features for luxury residences and upscale commercial builds. What You'll Do Day-to-Day: - Perform precise MIG welding (short-arc and spray) on mild steel, stainless, and aluminum for railings, stringers, and custom pieces - Assemble, fit, tack, and complete weldments using detailed blueprints or shop drawings - Grind, smooth, and prepare surfaces for flawless powder coat or mirror-polish finishes - Layout and build intricate angles, curves, radii, and complex geometries for stairs and railings - Run essential shop machinery: shear, press brake, ironworker, band saws, and standard fab tools - Handle occasional site visits for measurements, deliveries, or installs (field/construction background is a bonus) Must-Have Skills & Traits: - Solid track record in custom or architectural welding/fabrication (experience with stairs & railings is a big plus) - Clean, high-quality MIG beads on steel; stainless and aluminum a big plus - consistency matters - Confident blueprint reading and precise layout for challenging angles and measurements - Dependable, focused on details, professional attitude, and strong work ethic (show up on time, ready every day) Skills That Set You Apart (and Boost Your Rate/Priority): - TIG experience on stainless or aluminum and other exotic metals - Deep understanding of stair design - floating systems, mono-stringers, complex geometry - Real-world install experience (we handle our own field installs) - Woodworking knowledge or ability to assemble metal/wood treads - we run an in-house wood shop, so if you're primarily a welder but open to helping out with wood tasks during slower fab periods, that's perfect too! - Bilingual (English/Spanish) - Hablamos español y damos la bienvenida a todos! What You Get: - Top-tier competitive pay, direct deposit on a weekly basis - Paid holidays (after 90 days) - 1 week paid vacation (after 1 year) - Steady, year-round work with no seasonal slowdowns - Team-oriented shop that values quality craftsmanship and pride in every project Not fully at senior/lead level yet? No problem - we're also bringing on fitters, finishers/grinders, install assistants, and wood shop helpers . Please mention "Helper/Entry-Level Position" when you apply. Ready to Join? Send your resume + a few clear phone pics of your strongest custom stair, railing, or architectural metal projects you have availoable. We're hiring right away and excited to grow the team! Se habla español - everyone is welcome! If you love nailing perfect welds, tackling tricky stair geometries, and creating pieces that turn heads in luxury homes, let's build something amazing together. Apply today! Company Description Metal Solutions specializes in crafting custom metal pieces that elevate your space. From handrails and stairs that offer both beauty and functionality, to eye-catching signage and unique metalwork, we design and fabricate pieces that are tailored to your vision. Our team of skilled craftsmen and designers work with you from concept to creation, ensuring that every detail is perfect. We take pride in using only the highest quality materials to ensure that your metalwork is both visually stunning and structurally sound. We understand that attention to detail is paramount. That's why we take the time to work closely with you to understand your unique vision and preferences, and ensure that every detail is carefully considered and executed. From intricate designs and patterns to precise measurements and finishes, our team of skilled craftsmen and designers are dedicated to ensuring that your custom metal piece is flawless. Whether you're looking to enhance the aesthetic of your business or add a touch of elegance to your home, we're dedicated to bringing your ideas to life in metal. Company Description Metal Solutions specializes in crafting custom metal pieces that elevate your space. From handrails and stairs that offer both beauty and functionality, to eye-catching signage and unique metalwork, we design and fabricate pieces that are tailored to your vision. Our team of skilled craftsmen and designers work with you from concept to creation, ensuring that every detail is perfect. We take pride in using only the highest quality materials to ensure that your metalwork is both visually stunning and structurally sound. We understand that attention to detail is paramount. That's why we take the time to work closely with you to understand your unique vision and preferences, and ensure that every detail is carefully considered and executed. From intricate designs and patterns to precise measurements and finishes, our team of skilled craftsmen and designers are dedicated to ensuring that your custom metal piece is flawless. Whether you're looking to enhance the aesthetic of your business or add a touch of elegance to your home, we're dedicated to bringing your ideas to life in metal.
Job Description Job Description Salary: $23.00-$36.00 Depending on Experience Location: Coatesville, PA Pay: $23-$36/hour (based on experience & skills) Schedule: 5:00 AM start 10-hour shifts 30 minute lunch Facility: 65,000 SF AISC Certified fabrication shop (growing) Build America Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel fitters / fabricators who take pride in safety, accuracy, and craftsmanshipand want a career that supports long-term financial well-being. Our teams fabricate Data centers, High rises, stadiums, conveyor structures, auto racking systems, and structural reinforcements all built to AWS D1.1 standards. Experience Required 2+ years structural steel fitting and fabrication experience AISC fabrication shop experience preferred Ability to read and interpret shop drawings and blueprints Strong focus on quality, accuracy, and OSHA safety Ability to work in ateam-driven, safety-first environmentSupporting continuous improvement initiatives Key Responsibilities Read and interpret shop drawings, blueprints, and welding symbols Layout, Fit and fabricate carbon steel bridge components to meet dimensional tolerances Perform grinding, arc gouging, cutting torch, and oxyfuel cutting Safely operate overhead cranes, forklifts, and material handling equipment Maintain compliance with AISC, AWS D1.1 & D1.5, and OSHA standards Why JGM Work on iconic infrastructure projects that matter Safety and quality are non-negotiable Clear paths for skill development, advancement, and leadership A company that believes hard work should lead to financial stability and opportunity A company you can retire from Learn more about our Apprentice to Millionaire Program Benefits & Perks Competitive hourly pay ($23$36/hr) Medical, Dental & Vision Insurance PTO & Paid Holidays 401(k) with company match Life Insurance Short- & Long-Term Disability Employee Assistance Program Generous employee referral program Training and continuing education Fabrication Shop Perks Daily snack & drink allowance Annual safety boot allowance (on-site truck visit) Overtime available Annual prescription safety glasses program Lunch provided every other Friday Who Thrives Here Fitters and fabricators who care about safety, quality, and reputation Craftsmen who want more than a joba career building America Team players who want to grow skills, earnings, and leadership Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards. Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards.
07/26/2026
Full time
Job Description Job Description Salary: $23.00-$36.00 Depending on Experience Location: Coatesville, PA Pay: $23-$36/hour (based on experience & skills) Schedule: 5:00 AM start 10-hour shifts 30 minute lunch Facility: 65,000 SF AISC Certified fabrication shop (growing) Build America Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel fitters / fabricators who take pride in safety, accuracy, and craftsmanshipand want a career that supports long-term financial well-being. Our teams fabricate Data centers, High rises, stadiums, conveyor structures, auto racking systems, and structural reinforcements all built to AWS D1.1 standards. Experience Required 2+ years structural steel fitting and fabrication experience AISC fabrication shop experience preferred Ability to read and interpret shop drawings and blueprints Strong focus on quality, accuracy, and OSHA safety Ability to work in ateam-driven, safety-first environmentSupporting continuous improvement initiatives Key Responsibilities Read and interpret shop drawings, blueprints, and welding symbols Layout, Fit and fabricate carbon steel bridge components to meet dimensional tolerances Perform grinding, arc gouging, cutting torch, and oxyfuel cutting Safely operate overhead cranes, forklifts, and material handling equipment Maintain compliance with AISC, AWS D1.1 & D1.5, and OSHA standards Why JGM Work on iconic infrastructure projects that matter Safety and quality are non-negotiable Clear paths for skill development, advancement, and leadership A company that believes hard work should lead to financial stability and opportunity A company you can retire from Learn more about our Apprentice to Millionaire Program Benefits & Perks Competitive hourly pay ($23$36/hr) Medical, Dental & Vision Insurance PTO & Paid Holidays 401(k) with company match Life Insurance Short- & Long-Term Disability Employee Assistance Program Generous employee referral program Training and continuing education Fabrication Shop Perks Daily snack & drink allowance Annual safety boot allowance (on-site truck visit) Overtime available Annual prescription safety glasses program Lunch provided every other Friday Who Thrives Here Fitters and fabricators who care about safety, quality, and reputation Craftsmen who want more than a joba career building America Team players who want to grow skills, earnings, and leadership Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards. Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards.
Job Description Job Description At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life to our employees and their families. Every day, we come together to build stronger relationships with our vendors, our customers, and each other, so we can solve challenging problems, and continue to improve the safety, quality, and efficiency of all that we do. Caring matters at R-V. We care for each other, our safety, our quality, our learning, and our growth. We seek out diversity of thought, experience, and strengths in individuals, so we can continue to innovate as a team. We believe when we bring our true full selves to serve others, it elevates the quality of life for all. GENERAL JOB DESCRIPTION A Lead Welder/Fitter is required to safely prepare various alloys for fabrication processing, welding, and fitting. The Lead Welder/Fitter is an individual contributor and people leader that requires little or no supervisory assistance and possesses high-level knowledge in welding, fabrication technology and related applications. Teaching/leading others and transferring knowledge within assigned teams is a critical component of this position. Additionally, the Lead Welder/Fitter will lead and engage RVII to achieve all assigned manufacturing goals: Safety (no one gets hurt), Quality (free of defect), On-Time Delivery (meet customer delivery dates), Budget (at or below estimated hours) and People (develop & retain "hungry, humble and smart" leaders). SKILLS/QUALIFICATIONS • Demonstrated safety awareness and training in a construction/manufacturing environment • Safe operation of all welding and fabrication equipment • Read measuring devices and perform mathematical calculations • Follow verbal and written directions such as work orders or drawings • Daily use of grinders, torches, plasma cutters, overhead cranes, rigging and forklifts • Perform x-ray quality welds that are code/customer compliant • Read, interpret, and communicate WPS, QC plans, work instructions, blueprints, ASME code and AWS weld symbology • Accurately layout and fit products as directed by drawing or process/router sheet • Create fixtures to safely hold parts while being welded, prepped or cut • Perform basic NDE procedures (LPT and VT) as needed • Understand tolerances and general quality control principles and applications • Knowledge of welding principles applications and methods including but not limited to: SAW, FCAW, GMAW, and GTAW • 5+ years of welding/fitting experience preferably in ASME Code pressure vessels • Welding with multiple processes in multiple positions as required • Provide clear communication of who is doing what by when • Evaluation and clear communication of risks, hazards, lessons learned and acceptance criteria • Verify team competence in technical practices and execution • Provide viable solutions and technical support to manufacturing staff and internal customers • Assist in interviewing/testing new candidates and training current employees as needed • Support Manufacturing Coordinators and Engineering staff as needed • Facilitate the qualification of new PQR and WPQ • Lead the selection and distribution of filler metals and welding consumables EDUCATIONAL/PHYSICAL REQUIRMENTS • Must be able to complete and pass a physical assessment • Must be able to perform the essential functions of the job with or without accommodation • Formal training in Welding Technology or 5+ years of practical welding & fabrication experience • Must be able to lift at least 50lbs and stand or sit for extended periods in an office and/or industrial environment R-V Industries, Inc. is an equal opportunity employer.
07/26/2026
Full time
Job Description Job Description At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life to our employees and their families. Every day, we come together to build stronger relationships with our vendors, our customers, and each other, so we can solve challenging problems, and continue to improve the safety, quality, and efficiency of all that we do. Caring matters at R-V. We care for each other, our safety, our quality, our learning, and our growth. We seek out diversity of thought, experience, and strengths in individuals, so we can continue to innovate as a team. We believe when we bring our true full selves to serve others, it elevates the quality of life for all. GENERAL JOB DESCRIPTION A Lead Welder/Fitter is required to safely prepare various alloys for fabrication processing, welding, and fitting. The Lead Welder/Fitter is an individual contributor and people leader that requires little or no supervisory assistance and possesses high-level knowledge in welding, fabrication technology and related applications. Teaching/leading others and transferring knowledge within assigned teams is a critical component of this position. Additionally, the Lead Welder/Fitter will lead and engage RVII to achieve all assigned manufacturing goals: Safety (no one gets hurt), Quality (free of defect), On-Time Delivery (meet customer delivery dates), Budget (at or below estimated hours) and People (develop & retain "hungry, humble and smart" leaders). SKILLS/QUALIFICATIONS • Demonstrated safety awareness and training in a construction/manufacturing environment • Safe operation of all welding and fabrication equipment • Read measuring devices and perform mathematical calculations • Follow verbal and written directions such as work orders or drawings • Daily use of grinders, torches, plasma cutters, overhead cranes, rigging and forklifts • Perform x-ray quality welds that are code/customer compliant • Read, interpret, and communicate WPS, QC plans, work instructions, blueprints, ASME code and AWS weld symbology • Accurately layout and fit products as directed by drawing or process/router sheet • Create fixtures to safely hold parts while being welded, prepped or cut • Perform basic NDE procedures (LPT and VT) as needed • Understand tolerances and general quality control principles and applications • Knowledge of welding principles applications and methods including but not limited to: SAW, FCAW, GMAW, and GTAW • 5+ years of welding/fitting experience preferably in ASME Code pressure vessels • Welding with multiple processes in multiple positions as required • Provide clear communication of who is doing what by when • Evaluation and clear communication of risks, hazards, lessons learned and acceptance criteria • Verify team competence in technical practices and execution • Provide viable solutions and technical support to manufacturing staff and internal customers • Assist in interviewing/testing new candidates and training current employees as needed • Support Manufacturing Coordinators and Engineering staff as needed • Facilitate the qualification of new PQR and WPQ • Lead the selection and distribution of filler metals and welding consumables EDUCATIONAL/PHYSICAL REQUIRMENTS • Must be able to complete and pass a physical assessment • Must be able to perform the essential functions of the job with or without accommodation • Formal training in Welding Technology or 5+ years of practical welding & fabrication experience • Must be able to lift at least 50lbs and stand or sit for extended periods in an office and/or industrial environment R-V Industries, Inc. is an equal opportunity employer.
Job Description Job Description At StaffBuildersHR, we connect great people with great companies! With weekly pay, no fees, and real opportunities, we make it easy for you to find meaningful work and grow your career. We're partnering with a well-established steel company in the Lakeland, FL area that is seeking Welder/Fitters . In this role, you'll be fitting, aligning, and assembling structural steel components in a fabrication shop environment. This role requires the ability to read and interpret blueprints and welding symbols, use hand and power tools, and work closely with welders and quality control to ensure all assemblies meet project specifications and quality standards. What Makes the Job Great Excellent Company Culture Advancement Opportunities Safety and Attendance Incentives What You'll Be Doing Read and interpret shop drawings, blueprints, and welding symbols to determine proper layout and assembly of structural steel components. Identify CNC-scribed markings and use them to accurately position plates, beams, columns, and other structural members. Measure, mark, align, and fit steel components according to specifications and tolerances. Use hand tools, measuring devices, clamps, and fitting equipment to properly secure components. Tack weld fitted components to hold assemblies in place for final welding. Work closely with Quality Control (QC) to ensure fitted assemblies meet quality and safety standards prior to welding. Coordinate with welders to release approved assemblies for final weld completion. Rotate through different stages of the fabrication and fitting process as needed to support workflow and production schedules. Maintain a clean, safe, and organized work area in compliance with safety regulations. Who We're Looking For Previous experience as a structural steel fitter or similar fabrication role preferred Ability to read and interpret blueprints, shop drawings, and welding symbols Strong understanding of structural steel components and fabrication processes Proficiency using measuring tools (tape measure, squares, levels) and fitting tools Basic welding knowledge and ability to perform tack welds Attention to detail with a focus on accuracy and quality Ability to work independently and as part of a team in a fast-paced shop environment Commitment to workplace safety and quality standards What You Can Expect $22.00 - $28.00/hr depending on experience and test results Regular schedule of Monday - Friday, 7:00am - 4:30pm Occasional Saturdays Life insurance Short-term disability insurance Supplemental insurance options 401(k) matching plan Employee assistance program Vacation and personal days Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile.
07/26/2026
Full time
Job Description Job Description At StaffBuildersHR, we connect great people with great companies! With weekly pay, no fees, and real opportunities, we make it easy for you to find meaningful work and grow your career. We're partnering with a well-established steel company in the Lakeland, FL area that is seeking Welder/Fitters . In this role, you'll be fitting, aligning, and assembling structural steel components in a fabrication shop environment. This role requires the ability to read and interpret blueprints and welding symbols, use hand and power tools, and work closely with welders and quality control to ensure all assemblies meet project specifications and quality standards. What Makes the Job Great Excellent Company Culture Advancement Opportunities Safety and Attendance Incentives What You'll Be Doing Read and interpret shop drawings, blueprints, and welding symbols to determine proper layout and assembly of structural steel components. Identify CNC-scribed markings and use them to accurately position plates, beams, columns, and other structural members. Measure, mark, align, and fit steel components according to specifications and tolerances. Use hand tools, measuring devices, clamps, and fitting equipment to properly secure components. Tack weld fitted components to hold assemblies in place for final welding. Work closely with Quality Control (QC) to ensure fitted assemblies meet quality and safety standards prior to welding. Coordinate with welders to release approved assemblies for final weld completion. Rotate through different stages of the fabrication and fitting process as needed to support workflow and production schedules. Maintain a clean, safe, and organized work area in compliance with safety regulations. Who We're Looking For Previous experience as a structural steel fitter or similar fabrication role preferred Ability to read and interpret blueprints, shop drawings, and welding symbols Strong understanding of structural steel components and fabrication processes Proficiency using measuring tools (tape measure, squares, levels) and fitting tools Basic welding knowledge and ability to perform tack welds Attention to detail with a focus on accuracy and quality Ability to work independently and as part of a team in a fast-paced shop environment Commitment to workplace safety and quality standards What You Can Expect $22.00 - $28.00/hr depending on experience and test results Regular schedule of Monday - Friday, 7:00am - 4:30pm Occasional Saturdays Life insurance Short-term disability insurance Supplemental insurance options 401(k) matching plan Employee assistance program Vacation and personal days Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile.
Job Description Job Description Custom Architectural Welder & Fabricator - Premium Stairs, Railings & Metalwork Location: Nashville, TN Area Pay: $25-$40/hr based on experience (with overtime + skill-based bonuses - consistent full-time hours available!) We're growing! With a brand-new shop expansion underway, we're adding 2-3 more talented team members to handle our increasing volume of high-end, showcase-quality projects. Think stunning floating staircases, elegant spiral and mono-stringer designs, sleek glass and cable railings, ornate metal railings, and one-of-a-kind architectural metal features for luxury residences and upscale commercial builds. What You'll Do Day-to-Day: - Perform precise MIG welding (short-arc and spray) on mild steel, stainless, and aluminum for railings, stringers, and custom pieces - Assemble, fit, tack, and complete weldments using detailed blueprints or shop drawings - Grind, smooth, and prepare surfaces for flawless powder coat or mirror-polish finishes - Layout and build intricate angles, curves, radii, and complex geometries for stairs and railings - Run essential shop machinery: shear, press brake, ironworker, band saws, and standard fab tools - Handle occasional site visits for measurements, deliveries, or installs (field/construction background is a bonus) Must-Have Skills & Traits: - Solid track record in custom or architectural welding/fabrication (experience with stairs & railings is a big plus) - Clean, high-quality MIG beads on steel; stainless and aluminum a big plus - consistency matters - Confident blueprint reading and precise layout for challenging angles and measurements - Dependable, focused on details, professional attitude, and strong work ethic (show up on time, ready every day) Skills That Set You Apart (and Boost Your Rate/Priority): - TIG experience on stainless or aluminum and other exotic metals - Deep understanding of stair design - floating systems, mono-stringers, complex geometry - Real-world install experience (we handle our own field installs) - Woodworking knowledge or ability to assemble metal/wood treads - we run an in-house wood shop, so if you're primarily a welder but open to helping out with wood tasks during slower fab periods, that's perfect too! - Bilingual (English/Spanish) - Hablamos español y damos la bienvenida a todos! What You Get: - Top-tier competitive pay, direct deposit on a weekly basis - Paid holidays (after 90 days) - 1 week paid vacation (after 1 year) - Steady, year-round work with no seasonal slowdowns - Team-oriented shop that values quality craftsmanship and pride in every project Not fully at senior/lead level yet? No problem - we're also bringing on fitters, finishers/grinders, install assistants, and wood shop helpers . Please mention "Helper/Entry-Level Position" when you apply. Ready to Join? Send your resume + a few clear phone pics of your strongest custom stair, railing, or architectural metal projects you have availoable. We're hiring right away and excited to grow the team! Se habla español - everyone is welcome! If you love nailing perfect welds, tackling tricky stair geometries, and creating pieces that turn heads in luxury homes, let's build something amazing together. Apply today! Company Description Metal Solutions specializes in crafting custom metal pieces that elevate your space. From handrails and stairs that offer both beauty and functionality, to eye-catching signage and unique metalwork, we design and fabricate pieces that are tailored to your vision. Our team of skilled craftsmen and designers work with you from concept to creation, ensuring that every detail is perfect. We take pride in using only the highest quality materials to ensure that your metalwork is both visually stunning and structurally sound. We understand that attention to detail is paramount. That's why we take the time to work closely with you to understand your unique vision and preferences, and ensure that every detail is carefully considered and executed. From intricate designs and patterns to precise measurements and finishes, our team of skilled craftsmen and designers are dedicated to ensuring that your custom metal piece is flawless. Whether you're looking to enhance the aesthetic of your business or add a touch of elegance to your home, we're dedicated to bringing your ideas to life in metal. Company Description Metal Solutions specializes in crafting custom metal pieces that elevate your space. From handrails and stairs that offer both beauty and functionality, to eye-catching signage and unique metalwork, we design and fabricate pieces that are tailored to your vision. Our team of skilled craftsmen and designers work with you from concept to creation, ensuring that every detail is perfect. We take pride in using only the highest quality materials to ensure that your metalwork is both visually stunning and structurally sound. We understand that attention to detail is paramount. That's why we take the time to work closely with you to understand your unique vision and preferences, and ensure that every detail is carefully considered and executed. From intricate designs and patterns to precise measurements and finishes, our team of skilled craftsmen and designers are dedicated to ensuring that your custom metal piece is flawless. Whether you're looking to enhance the aesthetic of your business or add a touch of elegance to your home, we're dedicated to bringing your ideas to life in metal.
07/26/2026
Full time
Job Description Job Description Custom Architectural Welder & Fabricator - Premium Stairs, Railings & Metalwork Location: Nashville, TN Area Pay: $25-$40/hr based on experience (with overtime + skill-based bonuses - consistent full-time hours available!) We're growing! With a brand-new shop expansion underway, we're adding 2-3 more talented team members to handle our increasing volume of high-end, showcase-quality projects. Think stunning floating staircases, elegant spiral and mono-stringer designs, sleek glass and cable railings, ornate metal railings, and one-of-a-kind architectural metal features for luxury residences and upscale commercial builds. What You'll Do Day-to-Day: - Perform precise MIG welding (short-arc and spray) on mild steel, stainless, and aluminum for railings, stringers, and custom pieces - Assemble, fit, tack, and complete weldments using detailed blueprints or shop drawings - Grind, smooth, and prepare surfaces for flawless powder coat or mirror-polish finishes - Layout and build intricate angles, curves, radii, and complex geometries for stairs and railings - Run essential shop machinery: shear, press brake, ironworker, band saws, and standard fab tools - Handle occasional site visits for measurements, deliveries, or installs (field/construction background is a bonus) Must-Have Skills & Traits: - Solid track record in custom or architectural welding/fabrication (experience with stairs & railings is a big plus) - Clean, high-quality MIG beads on steel; stainless and aluminum a big plus - consistency matters - Confident blueprint reading and precise layout for challenging angles and measurements - Dependable, focused on details, professional attitude, and strong work ethic (show up on time, ready every day) Skills That Set You Apart (and Boost Your Rate/Priority): - TIG experience on stainless or aluminum and other exotic metals - Deep understanding of stair design - floating systems, mono-stringers, complex geometry - Real-world install experience (we handle our own field installs) - Woodworking knowledge or ability to assemble metal/wood treads - we run an in-house wood shop, so if you're primarily a welder but open to helping out with wood tasks during slower fab periods, that's perfect too! - Bilingual (English/Spanish) - Hablamos español y damos la bienvenida a todos! What You Get: - Top-tier competitive pay, direct deposit on a weekly basis - Paid holidays (after 90 days) - 1 week paid vacation (after 1 year) - Steady, year-round work with no seasonal slowdowns - Team-oriented shop that values quality craftsmanship and pride in every project Not fully at senior/lead level yet? No problem - we're also bringing on fitters, finishers/grinders, install assistants, and wood shop helpers . Please mention "Helper/Entry-Level Position" when you apply. Ready to Join? Send your resume + a few clear phone pics of your strongest custom stair, railing, or architectural metal projects you have availoable. We're hiring right away and excited to grow the team! Se habla español - everyone is welcome! If you love nailing perfect welds, tackling tricky stair geometries, and creating pieces that turn heads in luxury homes, let's build something amazing together. Apply today! Company Description Metal Solutions specializes in crafting custom metal pieces that elevate your space. From handrails and stairs that offer both beauty and functionality, to eye-catching signage and unique metalwork, we design and fabricate pieces that are tailored to your vision. Our team of skilled craftsmen and designers work with you from concept to creation, ensuring that every detail is perfect. We take pride in using only the highest quality materials to ensure that your metalwork is both visually stunning and structurally sound. We understand that attention to detail is paramount. That's why we take the time to work closely with you to understand your unique vision and preferences, and ensure that every detail is carefully considered and executed. From intricate designs and patterns to precise measurements and finishes, our team of skilled craftsmen and designers are dedicated to ensuring that your custom metal piece is flawless. Whether you're looking to enhance the aesthetic of your business or add a touch of elegance to your home, we're dedicated to bringing your ideas to life in metal. Company Description Metal Solutions specializes in crafting custom metal pieces that elevate your space. From handrails and stairs that offer both beauty and functionality, to eye-catching signage and unique metalwork, we design and fabricate pieces that are tailored to your vision. Our team of skilled craftsmen and designers work with you from concept to creation, ensuring that every detail is perfect. We take pride in using only the highest quality materials to ensure that your metalwork is both visually stunning and structurally sound. We understand that attention to detail is paramount. That's why we take the time to work closely with you to understand your unique vision and preferences, and ensure that every detail is carefully considered and executed. From intricate designs and patterns to precise measurements and finishes, our team of skilled craftsmen and designers are dedicated to ensuring that your custom metal piece is flawless. Whether you're looking to enhance the aesthetic of your business or add a touch of elegance to your home, we're dedicated to bringing your ideas to life in metal.
Job Description Job Description Aerex Industries, Inc . is an ASME Code authorized steel fabrication facility possessing the "U", "S" & "R" ASME Certificates of Authorization. Aerex Industries is actively pursuing individuals who take pride in the quality of their work, qualify by their ability to meet the job criteria and who are capable of working skillfully and safely while performing challenging tasks. Primary Duties and Responsibilities: High quality welding utilizing the GTAW, GMAW & FCAW processes. Fitting and welding of component parts, equipment, piping systems and vessels as specified by procedures, detailed fabrication drawings, written work orders and verbal instruction. Operate and/or use related fabrication equipment and tools including but not limited to forklifts, hoists, overhead cranes, cutting torches, power hand tools, and measuring instruments. Read, comprehend and follow job order specifications, drawings, work instructions, and procedures. Perform and understand basic mathematical and problem solving skills. Report safety related issues and violations to management. Perform or assist with other fabrication duties as requested by management. Maintain a safe and clean working environment by complying with company policies. Discuss ideas and thoughts for improving work environment, quality and / or production with management. Job Functions: Perform job functions in the standing position as well as other physical positions as needed to accommodate restrictive weld locations. Ability to pass welder qualification test in accordance to ASME Sect. IX, AWS D1.1 and AWS D1.6 utilizing the GTAW, GMAW & FCAW processes. Flexibility to work additional hours if needed to accommodate demanding delivery schedules. Perform work in a heavy industrial environment. Ability to wear the Personal Protective Equipment (PPE) as required and including but not limited to hearing protection, safety glasses, safety boots, face shield, full welding operator protection gear and respiratory protection equipment as needed. Ability to use a variety of hand tools and devices applicable to metal, FRP and plastic fabrication. Ability to accurately read and comprehend linear and circumferential measuring equipment. Basic math skill to include addition, subtraction, multiplication and division ranging from whole numbers to fractions and decimals. Ability to utilize trigonometry for layout and fitting is a bonus. Knowledge of welding symbols, fabrication layouts and drawings. Work cohesively with coworkers and management. Reliable attendance. Perform work safely in accordance with all Company safety policies, procedures, and Personal Protective Equipment (PPE) requirements. Education and Experience High School Diploma or GED required. Five years welding experience required. Essential Qualifications Must successfully pass a welder qualification test requiring a full penetration butt groove weld on 2" -Sch. 40 stainless steel pipe in the 6G position utilizing the GTAW process. Able to pass drug screen and background check. Ability to meet the physical demands required to perform job functions. Must have dependable transportation for commute to and from work. Adept at problem-solving. Adaptable to new situations and challenges. Open to changes and new ideas. Ability to satisfactorily work alone and willingness to work with others respectfully and professionally in a team environment. Ability to communicate. Ability to apply common sense understanding to carry out written and oral instructions. Ability to handle the stress that accompanies production standards, fast pace environment and deadlines. Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself and / or others. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.While performing the duties of this job, the employee is continually required to talk and hear. The employee frequently is required to communicate and exchange accurate information. The employee frequently is required to walk; stand; sit; use foot/feet; use hand/foot controls; use both hands to finger, handle, feel, grip, or drive; use fine finger ability; use wrist motion; reach above/below shoulders; carry with hands and arms; step up/down, climb or balance; and bend/stoop, twist, squat/crouch, kneel, or crawl. Specific vision abilities include close vision, distant vision, color vision, peripheral vision, depth perception, ability to adjust focus, and hand-eye coordination.Primary work assignment will require employees to frequently push/pull/lift from the floor or the table, and lift from table to shoulder level, up to 45 pounds. Employees may occasionally push/pull/lift below or above shoulder level greater than 45 pounds if they are physically able to safely do it. Employees are encouraged to use caution at all times when pushing/pulling/lifting. Employees should never lift more than they are physically able to handle safely. Aerex Industries, Inc. is an equal opportunity, drug free workplace employer committed to a diverse work force and a safe and healthy work environment for all employees.
07/26/2026
Full time
Job Description Job Description Aerex Industries, Inc . is an ASME Code authorized steel fabrication facility possessing the "U", "S" & "R" ASME Certificates of Authorization. Aerex Industries is actively pursuing individuals who take pride in the quality of their work, qualify by their ability to meet the job criteria and who are capable of working skillfully and safely while performing challenging tasks. Primary Duties and Responsibilities: High quality welding utilizing the GTAW, GMAW & FCAW processes. Fitting and welding of component parts, equipment, piping systems and vessels as specified by procedures, detailed fabrication drawings, written work orders and verbal instruction. Operate and/or use related fabrication equipment and tools including but not limited to forklifts, hoists, overhead cranes, cutting torches, power hand tools, and measuring instruments. Read, comprehend and follow job order specifications, drawings, work instructions, and procedures. Perform and understand basic mathematical and problem solving skills. Report safety related issues and violations to management. Perform or assist with other fabrication duties as requested by management. Maintain a safe and clean working environment by complying with company policies. Discuss ideas and thoughts for improving work environment, quality and / or production with management. Job Functions: Perform job functions in the standing position as well as other physical positions as needed to accommodate restrictive weld locations. Ability to pass welder qualification test in accordance to ASME Sect. IX, AWS D1.1 and AWS D1.6 utilizing the GTAW, GMAW & FCAW processes. Flexibility to work additional hours if needed to accommodate demanding delivery schedules. Perform work in a heavy industrial environment. Ability to wear the Personal Protective Equipment (PPE) as required and including but not limited to hearing protection, safety glasses, safety boots, face shield, full welding operator protection gear and respiratory protection equipment as needed. Ability to use a variety of hand tools and devices applicable to metal, FRP and plastic fabrication. Ability to accurately read and comprehend linear and circumferential measuring equipment. Basic math skill to include addition, subtraction, multiplication and division ranging from whole numbers to fractions and decimals. Ability to utilize trigonometry for layout and fitting is a bonus. Knowledge of welding symbols, fabrication layouts and drawings. Work cohesively with coworkers and management. Reliable attendance. Perform work safely in accordance with all Company safety policies, procedures, and Personal Protective Equipment (PPE) requirements. Education and Experience High School Diploma or GED required. Five years welding experience required. Essential Qualifications Must successfully pass a welder qualification test requiring a full penetration butt groove weld on 2" -Sch. 40 stainless steel pipe in the 6G position utilizing the GTAW process. Able to pass drug screen and background check. Ability to meet the physical demands required to perform job functions. Must have dependable transportation for commute to and from work. Adept at problem-solving. Adaptable to new situations and challenges. Open to changes and new ideas. Ability to satisfactorily work alone and willingness to work with others respectfully and professionally in a team environment. Ability to communicate. Ability to apply common sense understanding to carry out written and oral instructions. Ability to handle the stress that accompanies production standards, fast pace environment and deadlines. Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself and / or others. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.While performing the duties of this job, the employee is continually required to talk and hear. The employee frequently is required to communicate and exchange accurate information. The employee frequently is required to walk; stand; sit; use foot/feet; use hand/foot controls; use both hands to finger, handle, feel, grip, or drive; use fine finger ability; use wrist motion; reach above/below shoulders; carry with hands and arms; step up/down, climb or balance; and bend/stoop, twist, squat/crouch, kneel, or crawl. Specific vision abilities include close vision, distant vision, color vision, peripheral vision, depth perception, ability to adjust focus, and hand-eye coordination.Primary work assignment will require employees to frequently push/pull/lift from the floor or the table, and lift from table to shoulder level, up to 45 pounds. Employees may occasionally push/pull/lift below or above shoulder level greater than 45 pounds if they are physically able to safely do it. Employees are encouraged to use caution at all times when pushing/pulling/lifting. Employees should never lift more than they are physically able to handle safely. Aerex Industries, Inc. is an equal opportunity, drug free workplace employer committed to a diverse work force and a safe and healthy work environment for all employees.
Job Description Job Description Position Summary We are searching for a skilled Fabrication Fitter/Welder to join our client's team in Indianapolis, IN. In this position, you will be responsible for completing assigned welding tasks as part of a team to produce customer fabrication orders accurately and on schedule. This role emphasizes maintaining high productivity and safety standards while adhering to all company safety protocols. Key Responsibilities Set up and operate hand and power tools common to the welding trade, including shielded metal arc and gas metal arc welding equipment. Perform welding on components in flat, vertical, or overhead positions Operate safety equipment and adhere to safe work habits to maintain a safe working environment Lay out, position, align, and secure parts and assemblies before welding using tools such as straightedges, combination squares, calipers, and rulers Examine workpieces for defects and measure them with straightedges or templates to ensure they meet specifications Weld using various materials such as aluminum, stainless steel, cast iron, and other alloys. Prepare surfaces by cleaning and removing contaminants Select and install torches, tips, filler rods, and flux according to welding specifications or the types and thicknesses of metals. Process Monitoring: Monitor the fitting, burning, and welding processes to prevent issues such as overheating, warping, shrinking, distortion, or expansion of material Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan and execute welding operations Mark or tag materials with job numbers, piece marks, and other identifiers as required Detect faulty equipment or defective materials and notify supervisors. Clean or degrease parts as needed and repair products by dismantling, straightening, reshaping, and reassembling parts Fabricate products to match production specifications, including material thickness, width, length, and welding procedures Adhere to all company safety policies and procedures including PPE requirements Qualifications & Skills Minimum of 1 year of industrial fabrication welding experience; ability to pass a weld test may be required Ability to read and follow blueprints and job specifications Basic computer skills and familiarity with welding tools and equipment High School diploma or GED required; vocational school or related on-the-job experience preferred Careful attention to detail and thoroughness in completing tasks Reliable and responsible, with a strong commitment to fulfilling obligations Flexible and adaptable to changing work conditions and tasks Capable of working independently and managing tasks effectively Must be detail-oriented with a strong focus on precision and quality in all tasks Employment Type & Compensation Full-Time Temp-to-Hire Compensation: $23.50 - $24.50 per hour, based on experience Application Period: This position will remain open until filled Work Schedule 1st Shift 6:00 AM - 2:30 PM Benefits Paid Holidays Medical, Dental, Vision insurance Bereavement Leave Retirement, 401(k) Personal Advancement Employer Information This position is being recruited by NCW on behalf of a client company. All hiring decisions will be made by the employer. NCW partners with organizations nationwide to connect top talent with opportunities across construction, manufacturing, warehousing & distribution, and engineering industries. Equal Opportunity Employer We are an Equal Opportunity Employer and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration without regard to protected status in accordance with applicable laws.
07/25/2026
Full time
Job Description Job Description Position Summary We are searching for a skilled Fabrication Fitter/Welder to join our client's team in Indianapolis, IN. In this position, you will be responsible for completing assigned welding tasks as part of a team to produce customer fabrication orders accurately and on schedule. This role emphasizes maintaining high productivity and safety standards while adhering to all company safety protocols. Key Responsibilities Set up and operate hand and power tools common to the welding trade, including shielded metal arc and gas metal arc welding equipment. Perform welding on components in flat, vertical, or overhead positions Operate safety equipment and adhere to safe work habits to maintain a safe working environment Lay out, position, align, and secure parts and assemblies before welding using tools such as straightedges, combination squares, calipers, and rulers Examine workpieces for defects and measure them with straightedges or templates to ensure they meet specifications Weld using various materials such as aluminum, stainless steel, cast iron, and other alloys. Prepare surfaces by cleaning and removing contaminants Select and install torches, tips, filler rods, and flux according to welding specifications or the types and thicknesses of metals. Process Monitoring: Monitor the fitting, burning, and welding processes to prevent issues such as overheating, warping, shrinking, distortion, or expansion of material Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan and execute welding operations Mark or tag materials with job numbers, piece marks, and other identifiers as required Detect faulty equipment or defective materials and notify supervisors. Clean or degrease parts as needed and repair products by dismantling, straightening, reshaping, and reassembling parts Fabricate products to match production specifications, including material thickness, width, length, and welding procedures Adhere to all company safety policies and procedures including PPE requirements Qualifications & Skills Minimum of 1 year of industrial fabrication welding experience; ability to pass a weld test may be required Ability to read and follow blueprints and job specifications Basic computer skills and familiarity with welding tools and equipment High School diploma or GED required; vocational school or related on-the-job experience preferred Careful attention to detail and thoroughness in completing tasks Reliable and responsible, with a strong commitment to fulfilling obligations Flexible and adaptable to changing work conditions and tasks Capable of working independently and managing tasks effectively Must be detail-oriented with a strong focus on precision and quality in all tasks Employment Type & Compensation Full-Time Temp-to-Hire Compensation: $23.50 - $24.50 per hour, based on experience Application Period: This position will remain open until filled Work Schedule 1st Shift 6:00 AM - 2:30 PM Benefits Paid Holidays Medical, Dental, Vision insurance Bereavement Leave Retirement, 401(k) Personal Advancement Employer Information This position is being recruited by NCW on behalf of a client company. All hiring decisions will be made by the employer. NCW partners with organizations nationwide to connect top talent with opportunities across construction, manufacturing, warehousing & distribution, and engineering industries. Equal Opportunity Employer We are an Equal Opportunity Employer and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration without regard to protected status in accordance with applicable laws.
Job Description Job Description At StaffBuildersHR, we connect great people with great companies! With weekly pay, no fees, and real opportunities, we make it easy for you to find meaningful work and grow your career. We're partnering with a well-established steel company in the Lakeland, FL area that is seeking Welder/Fitters . In this role, you'll be fitting, aligning, and assembling structural steel components in a fabrication shop environment. This role requires the ability to read and interpret blueprints and welding symbols, use hand and power tools, and work closely with welders and quality control to ensure all assemblies meet project specifications and quality standards. What Makes the Job Great Excellent Company Culture Advancement Opportunities Safety and Attendance Incentives What You'll Be Doing Read and interpret shop drawings, blueprints, and welding symbols to determine proper layout and assembly of structural steel components. Identify CNC-scribed markings and use them to accurately position plates, beams, columns, and other structural members. Measure, mark, align, and fit steel components according to specifications and tolerances. Use hand tools, measuring devices, clamps, and fitting equipment to properly secure components. Tack weld fitted components to hold assemblies in place for final welding. Work closely with Quality Control (QC) to ensure fitted assemblies meet quality and safety standards prior to welding. Coordinate with welders to release approved assemblies for final weld completion. Rotate through different stages of the fabrication and fitting process as needed to support workflow and production schedules. Maintain a clean, safe, and organized work area in compliance with safety regulations. Who We're Looking For Previous experience as a structural steel fitter or similar fabrication role preferred Ability to read and interpret blueprints, shop drawings, and welding symbols Strong understanding of structural steel components and fabrication processes Proficiency using measuring tools (tape measure, squares, levels) and fitting tools Basic welding knowledge and ability to perform tack welds Attention to detail with a focus on accuracy and quality Ability to work independently and as part of a team in a fast-paced shop environment Commitment to workplace safety and quality standards What You Can Expect $22.00 - $28.00/hr depending on experience and test results Regular schedule of Monday - Friday, 7:00am - 4:30pm Occasional Saturdays Life insurance Short-term disability insurance Supplemental insurance options 401(k) matching plan Employee assistance program Vacation and personal days Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile.
07/25/2026
Full time
Job Description Job Description At StaffBuildersHR, we connect great people with great companies! With weekly pay, no fees, and real opportunities, we make it easy for you to find meaningful work and grow your career. We're partnering with a well-established steel company in the Lakeland, FL area that is seeking Welder/Fitters . In this role, you'll be fitting, aligning, and assembling structural steel components in a fabrication shop environment. This role requires the ability to read and interpret blueprints and welding symbols, use hand and power tools, and work closely with welders and quality control to ensure all assemblies meet project specifications and quality standards. What Makes the Job Great Excellent Company Culture Advancement Opportunities Safety and Attendance Incentives What You'll Be Doing Read and interpret shop drawings, blueprints, and welding symbols to determine proper layout and assembly of structural steel components. Identify CNC-scribed markings and use them to accurately position plates, beams, columns, and other structural members. Measure, mark, align, and fit steel components according to specifications and tolerances. Use hand tools, measuring devices, clamps, and fitting equipment to properly secure components. Tack weld fitted components to hold assemblies in place for final welding. Work closely with Quality Control (QC) to ensure fitted assemblies meet quality and safety standards prior to welding. Coordinate with welders to release approved assemblies for final weld completion. Rotate through different stages of the fabrication and fitting process as needed to support workflow and production schedules. Maintain a clean, safe, and organized work area in compliance with safety regulations. Who We're Looking For Previous experience as a structural steel fitter or similar fabrication role preferred Ability to read and interpret blueprints, shop drawings, and welding symbols Strong understanding of structural steel components and fabrication processes Proficiency using measuring tools (tape measure, squares, levels) and fitting tools Basic welding knowledge and ability to perform tack welds Attention to detail with a focus on accuracy and quality Ability to work independently and as part of a team in a fast-paced shop environment Commitment to workplace safety and quality standards What You Can Expect $22.00 - $28.00/hr depending on experience and test results Regular schedule of Monday - Friday, 7:00am - 4:30pm Occasional Saturdays Life insurance Short-term disability insurance Supplemental insurance options 401(k) matching plan Employee assistance program Vacation and personal days Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile.
Job Description Job Description At StaffBuildersHR, we connect great people with great companies! With weekly pay, no fees, and real opportunities, we make it easy for you to find meaningful work and grow your career. We're partnering with a well-established steel company in the Lakeland, FL area that is seeking Welder/Fitters . In this role, you'll be fitting, aligning, and assembling structural steel components in a fabrication shop environment. This role requires the ability to read and interpret blueprints and welding symbols, use hand and power tools, and work closely with welders and quality control to ensure all assemblies meet project specifications and quality standards. What Makes the Job Great Excellent Company Culture Advancement Opportunities Safety and Attendance Incentives What You'll Be Doing Read and interpret shop drawings, blueprints, and welding symbols to determine proper layout and assembly of structural steel components. Identify CNC-scribed markings and use them to accurately position plates, beams, columns, and other structural members. Measure, mark, align, and fit steel components according to specifications and tolerances. Use hand tools, measuring devices, clamps, and fitting equipment to properly secure components. Tack weld fitted components to hold assemblies in place for final welding. Work closely with Quality Control (QC) to ensure fitted assemblies meet quality and safety standards prior to welding. Coordinate with welders to release approved assemblies for final weld completion. Rotate through different stages of the fabrication and fitting process as needed to support workflow and production schedules. Maintain a clean, safe, and organized work area in compliance with safety regulations. Who We're Looking For Previous experience as a structural steel fitter or similar fabrication role preferred Ability to read and interpret blueprints, shop drawings, and welding symbols Strong understanding of structural steel components and fabrication processes Proficiency using measuring tools (tape measure, squares, levels) and fitting tools Basic welding knowledge and ability to perform tack welds Attention to detail with a focus on accuracy and quality Ability to work independently and as part of a team in a fast-paced shop environment Commitment to workplace safety and quality standards What You Can Expect $22.00 - $28.00/hr depending on experience and test results Regular schedule of Monday - Friday, 7:00am - 4:30pm Occasional Saturdays Life insurance Short-term disability insurance Supplemental insurance options 401(k) matching plan Employee assistance program Vacation and personal days Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile.
07/25/2026
Full time
Job Description Job Description At StaffBuildersHR, we connect great people with great companies! With weekly pay, no fees, and real opportunities, we make it easy for you to find meaningful work and grow your career. We're partnering with a well-established steel company in the Lakeland, FL area that is seeking Welder/Fitters . In this role, you'll be fitting, aligning, and assembling structural steel components in a fabrication shop environment. This role requires the ability to read and interpret blueprints and welding symbols, use hand and power tools, and work closely with welders and quality control to ensure all assemblies meet project specifications and quality standards. What Makes the Job Great Excellent Company Culture Advancement Opportunities Safety and Attendance Incentives What You'll Be Doing Read and interpret shop drawings, blueprints, and welding symbols to determine proper layout and assembly of structural steel components. Identify CNC-scribed markings and use them to accurately position plates, beams, columns, and other structural members. Measure, mark, align, and fit steel components according to specifications and tolerances. Use hand tools, measuring devices, clamps, and fitting equipment to properly secure components. Tack weld fitted components to hold assemblies in place for final welding. Work closely with Quality Control (QC) to ensure fitted assemblies meet quality and safety standards prior to welding. Coordinate with welders to release approved assemblies for final weld completion. Rotate through different stages of the fabrication and fitting process as needed to support workflow and production schedules. Maintain a clean, safe, and organized work area in compliance with safety regulations. Who We're Looking For Previous experience as a structural steel fitter or similar fabrication role preferred Ability to read and interpret blueprints, shop drawings, and welding symbols Strong understanding of structural steel components and fabrication processes Proficiency using measuring tools (tape measure, squares, levels) and fitting tools Basic welding knowledge and ability to perform tack welds Attention to detail with a focus on accuracy and quality Ability to work independently and as part of a team in a fast-paced shop environment Commitment to workplace safety and quality standards What You Can Expect $22.00 - $28.00/hr depending on experience and test results Regular schedule of Monday - Friday, 7:00am - 4:30pm Occasional Saturdays Life insurance Short-term disability insurance Supplemental insurance options 401(k) matching plan Employee assistance program Vacation and personal days Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Company Description StaffBuildersHR is a recruiting and staffing company committed to providing an exceptional staffing experience for our clients by offering superior customer service and highly trained individuals. StaffBuildersHR's focus is to place great people with great companies. StaffBuildersHR remains faithful to our clients as we continue to offer relevant, unique, and sustainable services. We know that each assignment and individual deserves a committed approach from our team. We are your HR business partner. If you are a highly motivated individual looking for an outstanding job opportunity, or seeking your next career move, please complete the application process and submit your resume. A member of our recruiting team will follow up with you in a timely manner based on your skills and qualifications. Employees must be able to perform the essential functions of the job and meet client expectations. This position is eligible for participation in our Medical, Dental, and Vision plans. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile. Attention Do not apply to this job by way of EDI-Staffbuilders International, Inc. on LinkedIn or any other platform. StaffBuildersHR is not affiliated with this company, and they are attempting to collect your data. We take your privacy and security seriously and are working towards a solution. In order to safeguard yourself, please ensure you are applying directly to StaffBuildersHR through our website, or to a job post listed by our profile.
Job Description Job Description Salary: $23.00-$36.00 Depending on Experience Location: Sinking Spring, PA Pay: $23$36/hour (based on experience & skills) Schedule: 5:00 AM start 10-hour shifts 30 minute lunch Facility: 75,000 SF AISC Advanced Bridge Certified fabrication shop (growing) Build Americas Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel fitters / fabricators who take pride in safety, accuracy, and craftsmanshipand want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Code standards. Experience Required 2+ years structural steel fitting and fabrication experience AISC fabrication shop experience preferred Ability to read and interpret shop drawings and blueprints Strong focus on quality, accuracy, and OSHA safety Ability to work in ateam-driven, safety-first environmentSupporting continuous improvement initiatives Key Responsibilities Read and interpret shop drawings, blueprints, and welding symbols Layout, Fit and fabricate carbon steel bridge components to meet dimensional tolerances Perform grinding, arc gouging, cutting torch, and oxyfuel cutting Safelyoperateoverhead cranes, forklifts, and material handling equipment Maintain compliance with AISC, AWS D1.1 & D1.5, and OSHA standards Why JGM Work on iconic infrastructure projects that matter Safety and quality are non-negotiable Clear paths for skill development, advancement, and leadership A company that believes hard work should lead to financial stability and opportunity A place you can retire from Learn more about our Apprentice to Millionaire Program Benefits & Perks Competitive hourly pay ($23$36/hr) Medical, Dental & Vision Insurance PTO & Paid Holidays 401(k) with company match Life Insurance Short- & Long-Term Disability Employee Assistance Program Generous employee referral program Training and continuing education Fabrication Shop Perks Daily snack & drink allowance Annual safety boot allowance (on-site truck visit) Annual prescription safety glasses program Overtime available Lunch provided every other Friday Who Thrives Here Fitters and fabricators who care about safety, quality, and reputation Craftsmen who want more than a joba career building America Team players who want to grow skills, earnings, and leadership Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards. Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards.
07/25/2026
Full time
Job Description Job Description Salary: $23.00-$36.00 Depending on Experience Location: Sinking Spring, PA Pay: $23$36/hour (based on experience & skills) Schedule: 5:00 AM start 10-hour shifts 30 minute lunch Facility: 75,000 SF AISC Advanced Bridge Certified fabrication shop (growing) Build Americas Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel fitters / fabricators who take pride in safety, accuracy, and craftsmanshipand want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Code standards. Experience Required 2+ years structural steel fitting and fabrication experience AISC fabrication shop experience preferred Ability to read and interpret shop drawings and blueprints Strong focus on quality, accuracy, and OSHA safety Ability to work in ateam-driven, safety-first environmentSupporting continuous improvement initiatives Key Responsibilities Read and interpret shop drawings, blueprints, and welding symbols Layout, Fit and fabricate carbon steel bridge components to meet dimensional tolerances Perform grinding, arc gouging, cutting torch, and oxyfuel cutting Safelyoperateoverhead cranes, forklifts, and material handling equipment Maintain compliance with AISC, AWS D1.1 & D1.5, and OSHA standards Why JGM Work on iconic infrastructure projects that matter Safety and quality are non-negotiable Clear paths for skill development, advancement, and leadership A company that believes hard work should lead to financial stability and opportunity A place you can retire from Learn more about our Apprentice to Millionaire Program Benefits & Perks Competitive hourly pay ($23$36/hr) Medical, Dental & Vision Insurance PTO & Paid Holidays 401(k) with company match Life Insurance Short- & Long-Term Disability Employee Assistance Program Generous employee referral program Training and continuing education Fabrication Shop Perks Daily snack & drink allowance Annual safety boot allowance (on-site truck visit) Annual prescription safety glasses program Overtime available Lunch provided every other Friday Who Thrives Here Fitters and fabricators who care about safety, quality, and reputation Craftsmen who want more than a joba career building America Team players who want to grow skills, earnings, and leadership Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards. Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards.
Welder / Fitter At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life to our employees and their families. Every day, we come together to build stronger relationships with our vendors, our customers, and each other, so we can solve challenging problems, and continue to improve the safety, quality, and efficiency of all that we do. Caring matters at R-V. We care for each other, our safety, our quality, our learning, and our growth. We seek out diversity of thought, experience, and strengths in individuals, so we can continue to innovate as a team. We believe when we bring our true full selves to serve others, it elevates the quality of life for all. As with all Job Descriptions at R-V, this job is considered safety-sensitive. GENERAL JOB DESCRIPTION A Welder/Fitter is required to cut and burn in relation to the fabrication process, fabricate, weld, and straighten all types of materials used in the company's fabrication and welding operation with little or no supervisory assistance in the shop. SKILLS/QUALIFICATIONS Demonstrated safety awareness and training in a construction/manufacturing environment Read a tape measure to 1/64" Follow oral and written directions Daily use grinders, torches, plasma cutters, overhead cranes, and forklifts May occasionally perform x-ray quality welds Read and follow weld procedures, QC plans, and other work instruction documents Setup and adjust welding machines and plasma torches Read and interpret blueprints and AWS weld symbols Lay and fit as directed by drawing or process sheet Create fixtures to hold part while being welded Perform basic NDE procedures (LPT and VT) Understand tolerances and the importance of maintaining them EDUCATIONAL/PHYSICAL REQUIRMENTS Knowledge of welding principals and methods including FCAW, GMAW, and GTAW 5+ years welding/fitting experience welding ASME Code pressure vessels Welding with multiple processes in multiple positions as required Must be able to complete and pass a physical assessment Must be able to perform the essential functions of the job with or without accommodation Every day repetitive wrist, hand or finger movement, involving gripping and wrist torqueing Every day standing, walking, bending, crouching, and stooping Everyday lifting 25 to 50 lbs Exposure to moving machinery, dust, dirt, grease, or other disagreeable elements Must have ability to hear emergency communications and alarms R-V Industries, Inc. is an equal opportunity employer. PI909cd78cf5-
07/24/2026
Full time
Welder / Fitter At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life to our employees and their families. Every day, we come together to build stronger relationships with our vendors, our customers, and each other, so we can solve challenging problems, and continue to improve the safety, quality, and efficiency of all that we do. Caring matters at R-V. We care for each other, our safety, our quality, our learning, and our growth. We seek out diversity of thought, experience, and strengths in individuals, so we can continue to innovate as a team. We believe when we bring our true full selves to serve others, it elevates the quality of life for all. As with all Job Descriptions at R-V, this job is considered safety-sensitive. GENERAL JOB DESCRIPTION A Welder/Fitter is required to cut and burn in relation to the fabrication process, fabricate, weld, and straighten all types of materials used in the company's fabrication and welding operation with little or no supervisory assistance in the shop. SKILLS/QUALIFICATIONS Demonstrated safety awareness and training in a construction/manufacturing environment Read a tape measure to 1/64" Follow oral and written directions Daily use grinders, torches, plasma cutters, overhead cranes, and forklifts May occasionally perform x-ray quality welds Read and follow weld procedures, QC plans, and other work instruction documents Setup and adjust welding machines and plasma torches Read and interpret blueprints and AWS weld symbols Lay and fit as directed by drawing or process sheet Create fixtures to hold part while being welded Perform basic NDE procedures (LPT and VT) Understand tolerances and the importance of maintaining them EDUCATIONAL/PHYSICAL REQUIRMENTS Knowledge of welding principals and methods including FCAW, GMAW, and GTAW 5+ years welding/fitting experience welding ASME Code pressure vessels Welding with multiple processes in multiple positions as required Must be able to complete and pass a physical assessment Must be able to perform the essential functions of the job with or without accommodation Every day repetitive wrist, hand or finger movement, involving gripping and wrist torqueing Every day standing, walking, bending, crouching, and stooping Everyday lifting 25 to 50 lbs Exposure to moving machinery, dust, dirt, grease, or other disagreeable elements Must have ability to hear emergency communications and alarms R-V Industries, Inc. is an equal opportunity employer. PI909cd78cf5-
Job Description Job Description Madden Industrial Craftsmen is seeking an experienced Fabricator / Welder for our client in Portland, OR. This position supports structural steel fabrication and installation for commercial buildings, bridges, and large infrastructure projects. The ideal candidate has hands-on experience with the following: structural steel layout and fit-up, blueprint reading, flux core welding, fabrication of beams and columns, and safe operation of lifting equipment in a production environment. Pay & Schedule Pay: $28?$32/hour DOE Shift: Monday?Friday, Swing Shift 2:30pm start (paid lunch) Key Responsibilities ? Read and interpret structural steel blueprints, shop drawings, and layout plans ? Perform layout, fit-up, and alignment of beams, columns, braces, frames, and assemblies ? Measure, cut, drill, and prepare steel components per project specifications ? Perform welding and fabrication as required (primarily structural applications) ? Work closely with welders and team members to ensure proper fit and weld placement ? Inspect completed assemblies to ensure compliance with drawings and tolerances ? Operate cranes, hoists, and lifting equipment to position structural components ? Maintain tools and equipment while following OSHA and site-specific safety procedures ? Work at heights and in physically demanding environments as required Required Qualifications ? 3+ years of experience as a Structural Steel Fitter, Fabricator, or Welder ? Strong ability to read and interpret structural steel blueprints and technical drawings ? Experience performing layout and fit-up for structural components ? Experience operating cranes, hoists, or heavy lifting equipment ? Ability to work safely at heights and in industrial environments ? Dependable attendance and strong safety awareness ? Ability to lift heavy materials and perform frequent standing, bending, and kneeling Preferred Qualifications ? Experience on large-scale structural projects (bridges, commercial buildings, infrastructure) ? Flux core welding experience ? Structural welding certifications (AWS or similar) ? Experience assisting with technical fit-up or field modifications Benefits ? Medical ? Paid Sick Leave ? Paid Holidays ? 401(k) with Company Match Work Environment This role operates in a structural steel fabrication and installation environment. Work includes exposure to heavy equipment, elevated work areas, noise, heat, and outdoor conditions. PPE is required at all times along with strict adherence to shop and jobsite safety procedures.
07/23/2026
Full time
Job Description Job Description Madden Industrial Craftsmen is seeking an experienced Fabricator / Welder for our client in Portland, OR. This position supports structural steel fabrication and installation for commercial buildings, bridges, and large infrastructure projects. The ideal candidate has hands-on experience with the following: structural steel layout and fit-up, blueprint reading, flux core welding, fabrication of beams and columns, and safe operation of lifting equipment in a production environment. Pay & Schedule Pay: $28?$32/hour DOE Shift: Monday?Friday, Swing Shift 2:30pm start (paid lunch) Key Responsibilities ? Read and interpret structural steel blueprints, shop drawings, and layout plans ? Perform layout, fit-up, and alignment of beams, columns, braces, frames, and assemblies ? Measure, cut, drill, and prepare steel components per project specifications ? Perform welding and fabrication as required (primarily structural applications) ? Work closely with welders and team members to ensure proper fit and weld placement ? Inspect completed assemblies to ensure compliance with drawings and tolerances ? Operate cranes, hoists, and lifting equipment to position structural components ? Maintain tools and equipment while following OSHA and site-specific safety procedures ? Work at heights and in physically demanding environments as required Required Qualifications ? 3+ years of experience as a Structural Steel Fitter, Fabricator, or Welder ? Strong ability to read and interpret structural steel blueprints and technical drawings ? Experience performing layout and fit-up for structural components ? Experience operating cranes, hoists, or heavy lifting equipment ? Ability to work safely at heights and in industrial environments ? Dependable attendance and strong safety awareness ? Ability to lift heavy materials and perform frequent standing, bending, and kneeling Preferred Qualifications ? Experience on large-scale structural projects (bridges, commercial buildings, infrastructure) ? Flux core welding experience ? Structural welding certifications (AWS or similar) ? Experience assisting with technical fit-up or field modifications Benefits ? Medical ? Paid Sick Leave ? Paid Holidays ? 401(k) with Company Match Work Environment This role operates in a structural steel fabrication and installation environment. Work includes exposure to heavy equipment, elevated work areas, noise, heat, and outdoor conditions. PPE is required at all times along with strict adherence to shop and jobsite safety procedures.
Job Description Job Description URGENT HIRE WESTERN COLORADO Lead the welding bench on a fast-scaling industrial fabrication platform. THE ROLE Lead our welding bench across architectural, structural, and production work - running priority welds, mentoring junior welders, and owning weld quality from fit-up to final inspection. Foreman track. We promote internally first. ABOUT MOUNTAIN OFF-ROAD / DSM Mountain Off-Road / DSM is a precision steel fabrication and CNC machining platform in Delta, Colorado. Our work spans: • Architectural cladding for national transit programs • AWS D1.1 structural steel for utility-scale infrastructure • Stainless production cells for OEM clients • Aftermarket consumer products We're scaling. In the last twelve months we've signed multi-year programs with national clients, launched a dedicated stainless production cell, and stood up the first formal pod operating model in our shop's history. This isn't a maintenance shop. WHAT YOU'LL DO You're the bench captain on the floor - half hands-on welder, half mentor and quality owner: • Run priority AWS D1.1 structural and/or D1.2 aluminum welds on critical jobs • Lead daily welding execution across pods - architectural cladding, structural steel, production cells • Mentor and develop junior welders and fabricators - own bench depth and cross-training • Own first-piece inspection, in-process QC, and weld quality standards (WPS adherence, visual and dimensional) • Coordinate with fitters, brake op, and laser op to keep the welding bench fed • Manage consumables, gas, and tooling - keep the shop running clean • Champion safety and PPE compliance on the floor GROWTH PATH • First 90 days: Embed into the pod system. Run priority welds, learn the tooling library, begin mentoring junior welders. • 6 months: Full bench ownership. Set weld priorities daily, run quality checkpoints, documented cross-training plan in place. • 12 months: Welding Foreman. Own weld throughput, quality metrics, and bench depth. • Beyond: Welding Pod Lead or Production Floor Lead as the platform scales. REQUIRED • 10+ years welding experience in a fabrication or production environment • AWS D1.1 (structural steel) or D1.2 (aluminum) certified • Read shop drawings, weld symbols, and fit-up callouts • Experience leading or mentoring a small team • Ability to lift 50 lbs, stand for full shift, work safely around moving steel PREFERRED • CWI (AWS Certified Welding Inspector) credential • Both D1.1 and D1.2 certified • TIG capability for stainless and precision work • RT/PT NDE coordination experience • Prior foreman, lead, or working-foreman experience • Stainless or resistance welding production environment exposure WHAT WE OFFER • $28 - $36/hr based on experience, with reviews tied to clear performance milestones • Performance bonuses • Paid time off and parental leave • Tools, PPE, and welding gear provided - bring you, not your kit • Modern, well-equipped shop with a professional production management layer • A real path - we promote internally first WHY DELTA, COLORADO Delta sits in the Uncompahgre Valley - within an hour of Telluride, Crested Butte, the Black Canyon of the Gunnison, and the Grand Mesa. Lower cost of living than the Front Range, no traffic, four real seasons. Some of the best mountain biking, skiing, hunting, and fly fishing in Colorado - minus the Front Range commute. HOW TO APPLY Send your resume to with a short note about the most challenging weld you've owned end-to-end. We respond to qualified applicants within 48 hours. Mountain Off-Road / DSM is an equal opportunity employer.
07/23/2026
Full time
Job Description Job Description URGENT HIRE WESTERN COLORADO Lead the welding bench on a fast-scaling industrial fabrication platform. THE ROLE Lead our welding bench across architectural, structural, and production work - running priority welds, mentoring junior welders, and owning weld quality from fit-up to final inspection. Foreman track. We promote internally first. ABOUT MOUNTAIN OFF-ROAD / DSM Mountain Off-Road / DSM is a precision steel fabrication and CNC machining platform in Delta, Colorado. Our work spans: • Architectural cladding for national transit programs • AWS D1.1 structural steel for utility-scale infrastructure • Stainless production cells for OEM clients • Aftermarket consumer products We're scaling. In the last twelve months we've signed multi-year programs with national clients, launched a dedicated stainless production cell, and stood up the first formal pod operating model in our shop's history. This isn't a maintenance shop. WHAT YOU'LL DO You're the bench captain on the floor - half hands-on welder, half mentor and quality owner: • Run priority AWS D1.1 structural and/or D1.2 aluminum welds on critical jobs • Lead daily welding execution across pods - architectural cladding, structural steel, production cells • Mentor and develop junior welders and fabricators - own bench depth and cross-training • Own first-piece inspection, in-process QC, and weld quality standards (WPS adherence, visual and dimensional) • Coordinate with fitters, brake op, and laser op to keep the welding bench fed • Manage consumables, gas, and tooling - keep the shop running clean • Champion safety and PPE compliance on the floor GROWTH PATH • First 90 days: Embed into the pod system. Run priority welds, learn the tooling library, begin mentoring junior welders. • 6 months: Full bench ownership. Set weld priorities daily, run quality checkpoints, documented cross-training plan in place. • 12 months: Welding Foreman. Own weld throughput, quality metrics, and bench depth. • Beyond: Welding Pod Lead or Production Floor Lead as the platform scales. REQUIRED • 10+ years welding experience in a fabrication or production environment • AWS D1.1 (structural steel) or D1.2 (aluminum) certified • Read shop drawings, weld symbols, and fit-up callouts • Experience leading or mentoring a small team • Ability to lift 50 lbs, stand for full shift, work safely around moving steel PREFERRED • CWI (AWS Certified Welding Inspector) credential • Both D1.1 and D1.2 certified • TIG capability for stainless and precision work • RT/PT NDE coordination experience • Prior foreman, lead, or working-foreman experience • Stainless or resistance welding production environment exposure WHAT WE OFFER • $28 - $36/hr based on experience, with reviews tied to clear performance milestones • Performance bonuses • Paid time off and parental leave • Tools, PPE, and welding gear provided - bring you, not your kit • Modern, well-equipped shop with a professional production management layer • A real path - we promote internally first WHY DELTA, COLORADO Delta sits in the Uncompahgre Valley - within an hour of Telluride, Crested Butte, the Black Canyon of the Gunnison, and the Grand Mesa. Lower cost of living than the Front Range, no traffic, four real seasons. Some of the best mountain biking, skiing, hunting, and fly fishing in Colorado - minus the Front Range commute. HOW TO APPLY Send your resume to with a short note about the most challenging weld you've owned end-to-end. We respond to qualified applicants within 48 hours. Mountain Off-Road / DSM is an equal opportunity employer.
Job Description Job Description LAYOUT AND FITTER FOR MISCELLANEOUS/ STRUCTURAL STEEL Pay: $25-40 per hour Depended on experience/ skill Job description: NJ based company looking for a structural steel fabricator Pay depends on experience and abilities Job description: Looking for a Head fabricator who can layout and fit. Must be able to oversee and lead a team in completion of various projects. Looking for someone with experience in that role. We are an equal opportunity employer with a drug free workplace. Responsibilities: Layout structural and miscellaneous steel Fit up structural and miscellaneous steel Operate overhead crane unloading material and loading finished projects Lead a team in projects to completion Job Skills, Qualifications, Requirements: Certified welder Osha 10 card or greater Form of transportation Understand and speak English Ability to MIG and stick weld Ability to read blueprints or follow technical specifications Ability to work with hands, lift heavy objects and stand on your feet for long periods of time; often doing repetitive motions. High School Diploma or equivalent. Advanced mathematic skills. Pay commensurate with experience. Medical insurance and 401k program offered Job Type: Full time Schedule: Monday-Friday 7AM to 3PM. Occasional Saturdays if needed Occasional overtime to complete projects Prompt attendance is required Must be highly motivated and ready to give your all Job Type: Full-time Job Type: Full-time Benefits: 401(k) 401(k) matching Health insurance Paid time off Shift: 10 hour shift Experience: Welding: 5 years (Required) Fabrication: 5 years (Preferred) Language: English (Required) License/Certification: Driver's License (Required) Work Location: In person Company Description Great company to work with. Company Description Great company to work with.
07/23/2026
Full time
Job Description Job Description LAYOUT AND FITTER FOR MISCELLANEOUS/ STRUCTURAL STEEL Pay: $25-40 per hour Depended on experience/ skill Job description: NJ based company looking for a structural steel fabricator Pay depends on experience and abilities Job description: Looking for a Head fabricator who can layout and fit. Must be able to oversee and lead a team in completion of various projects. Looking for someone with experience in that role. We are an equal opportunity employer with a drug free workplace. Responsibilities: Layout structural and miscellaneous steel Fit up structural and miscellaneous steel Operate overhead crane unloading material and loading finished projects Lead a team in projects to completion Job Skills, Qualifications, Requirements: Certified welder Osha 10 card or greater Form of transportation Understand and speak English Ability to MIG and stick weld Ability to read blueprints or follow technical specifications Ability to work with hands, lift heavy objects and stand on your feet for long periods of time; often doing repetitive motions. High School Diploma or equivalent. Advanced mathematic skills. Pay commensurate with experience. Medical insurance and 401k program offered Job Type: Full time Schedule: Monday-Friday 7AM to 3PM. Occasional Saturdays if needed Occasional overtime to complete projects Prompt attendance is required Must be highly motivated and ready to give your all Job Type: Full-time Job Type: Full-time Benefits: 401(k) 401(k) matching Health insurance Paid time off Shift: 10 hour shift Experience: Welding: 5 years (Required) Fabrication: 5 years (Preferred) Language: English (Required) License/Certification: Driver's License (Required) Work Location: In person Company Description Great company to work with. Company Description Great company to work with.
Established Manufacturing Employer
Saint Louis, Missouri
Job Description Job Description Overview We are seeking a skilled Welder/Fitter to join our dynamic team. The ideal candidate will possess a strong background in welding and fabrication, with experience in various welding techniques and the ability to read blueprints and schematics. This role is essential in ensuring the quality and integrity of our products through precise welding and fitting processes. Responsibilities Perform MIG, TIG, and FCAW welding on various materials including sheet metal and ductwork. Read and interpret blueprints, schematics, and ASME codes & standards to execute projects accurately. Utilize hand tools, power tools, and machinery such as press brake machines for fabrication tasks. Conduct pipe threading, rigging, and assembly of components as required. Ensure all welds meet quality standards through inspection using calipers, micrometers, and other measuring tools. Operate cranes and forklifts safely to move materials around the construction site. Maintain a clean and organized work environment while adhering to safety protocols. Skills Proven construction site experience with a focus on welding and fabrication. Proficiency in MIG welding, TIG welding, FCAW, plasma cutting, and soldering techniques. Strong mechanical knowledge with the ability to operate machinery effectively. Familiarity with basic math for measurements and calculations related to welding tasks. Experience with ductwork installation and manufacturing processes. Ability to work collaboratively in a team-oriented environment while demonstrating attention to detail. Knowledge of rigging practices and safe operation of cranes and forklifts is preferred. Join us as we build quality products that meet industry standards while fostering a culture of safety and excellence in our workplace! Company Description Join a team that values hard work, professional growth, and employee success. Our clients are established organizations that invest in their people, provide opportunities for advancement, and foster collaborative work environments. Company Description Join a team that values hard work, professional growth, and employee success. Our clients are established organizations that invest in their people, provide opportunities for advancement, and foster collaborative work environments.
07/23/2026
Full time
Job Description Job Description Overview We are seeking a skilled Welder/Fitter to join our dynamic team. The ideal candidate will possess a strong background in welding and fabrication, with experience in various welding techniques and the ability to read blueprints and schematics. This role is essential in ensuring the quality and integrity of our products through precise welding and fitting processes. Responsibilities Perform MIG, TIG, and FCAW welding on various materials including sheet metal and ductwork. Read and interpret blueprints, schematics, and ASME codes & standards to execute projects accurately. Utilize hand tools, power tools, and machinery such as press brake machines for fabrication tasks. Conduct pipe threading, rigging, and assembly of components as required. Ensure all welds meet quality standards through inspection using calipers, micrometers, and other measuring tools. Operate cranes and forklifts safely to move materials around the construction site. Maintain a clean and organized work environment while adhering to safety protocols. Skills Proven construction site experience with a focus on welding and fabrication. Proficiency in MIG welding, TIG welding, FCAW, plasma cutting, and soldering techniques. Strong mechanical knowledge with the ability to operate machinery effectively. Familiarity with basic math for measurements and calculations related to welding tasks. Experience with ductwork installation and manufacturing processes. Ability to work collaboratively in a team-oriented environment while demonstrating attention to detail. Knowledge of rigging practices and safe operation of cranes and forklifts is preferred. Join us as we build quality products that meet industry standards while fostering a culture of safety and excellence in our workplace! Company Description Join a team that values hard work, professional growth, and employee success. Our clients are established organizations that invest in their people, provide opportunities for advancement, and foster collaborative work environments. Company Description Join a team that values hard work, professional growth, and employee success. Our clients are established organizations that invest in their people, provide opportunities for advancement, and foster collaborative work environments.
Job Description Job Description Salary: $23.00-$36.00 Depending on Experience Location: Coatesville, PA Pay: $23-$36/hour (based on experience & skills) Schedule: 5:00 AM start 10-hour shifts 30 minute lunch Facility: 65,000 SF AISC Certified fabrication shop (growing) Build America Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel fitters / fabricators who take pride in safety, accuracy, and craftsmanshipand want a career that supports long-term financial well-being. Our teams fabricate Data centers, High rises, stadiums, conveyor structures, auto racking systems, and structural reinforcements all built to AWS D1.1 standards. Experience Required 2+ years structural steel fitting and fabrication experience AISC fabrication shop experience preferred Ability to read and interpret shop drawings and blueprints Strong focus on quality, accuracy, and OSHA safety Ability to work in ateam-driven, safety-first environmentSupporting continuous improvement initiatives Key Responsibilities Read and interpret shop drawings, blueprints, and welding symbols Layout, Fit and fabricate carbon steel bridge components to meet dimensional tolerances Perform grinding, arc gouging, cutting torch, and oxyfuel cutting Safely operate overhead cranes, forklifts, and material handling equipment Maintain compliance with AISC, AWS D1.1 & D1.5, and OSHA standards Why JGM Work on iconic infrastructure projects that matter Safety and quality are non-negotiable Clear paths for skill development, advancement, and leadership A company that believes hard work should lead to financial stability and opportunity A company you can retire from Learn more about our Apprentice to Millionaire Program Benefits & Perks Competitive hourly pay ($23$36/hr) Medical, Dental & Vision Insurance PTO & Paid Holidays 401(k) with company match Life Insurance Short- & Long-Term Disability Employee Assistance Program Generous employee referral program Training and continuing education Fabrication Shop Perks Daily snack & drink allowance Annual safety boot allowance (on-site truck visit) Overtime available Annual prescription safety glasses program Lunch provided every other Friday Who Thrives Here Fitters and fabricators who care about safety, quality, and reputation Craftsmen who want more than a joba career building America Team players who want to grow skills, earnings, and leadership Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards. Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards.
07/23/2026
Full time
Job Description Job Description Salary: $23.00-$36.00 Depending on Experience Location: Coatesville, PA Pay: $23-$36/hour (based on experience & skills) Schedule: 5:00 AM start 10-hour shifts 30 minute lunch Facility: 65,000 SF AISC Certified fabrication shop (growing) Build America Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel fitters / fabricators who take pride in safety, accuracy, and craftsmanshipand want a career that supports long-term financial well-being. Our teams fabricate Data centers, High rises, stadiums, conveyor structures, auto racking systems, and structural reinforcements all built to AWS D1.1 standards. Experience Required 2+ years structural steel fitting and fabrication experience AISC fabrication shop experience preferred Ability to read and interpret shop drawings and blueprints Strong focus on quality, accuracy, and OSHA safety Ability to work in ateam-driven, safety-first environmentSupporting continuous improvement initiatives Key Responsibilities Read and interpret shop drawings, blueprints, and welding symbols Layout, Fit and fabricate carbon steel bridge components to meet dimensional tolerances Perform grinding, arc gouging, cutting torch, and oxyfuel cutting Safely operate overhead cranes, forklifts, and material handling equipment Maintain compliance with AISC, AWS D1.1 & D1.5, and OSHA standards Why JGM Work on iconic infrastructure projects that matter Safety and quality are non-negotiable Clear paths for skill development, advancement, and leadership A company that believes hard work should lead to financial stability and opportunity A company you can retire from Learn more about our Apprentice to Millionaire Program Benefits & Perks Competitive hourly pay ($23$36/hr) Medical, Dental & Vision Insurance PTO & Paid Holidays 401(k) with company match Life Insurance Short- & Long-Term Disability Employee Assistance Program Generous employee referral program Training and continuing education Fabrication Shop Perks Daily snack & drink allowance Annual safety boot allowance (on-site truck visit) Overtime available Annual prescription safety glasses program Lunch provided every other Friday Who Thrives Here Fitters and fabricators who care about safety, quality, and reputation Craftsmen who want more than a joba career building America Team players who want to grow skills, earnings, and leadership Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards. Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards.
Job Description Job Description Salary: $23.00-$36.00 Depending on Experience Location: Sinking Spring, PA Pay: $23$36/hour (based on experience & skills) Schedule: 5:00 AM start 10-hour shifts 30 minute lunch Facility: 75,000 SF AISC Advanced Bridge Certified fabrication shop (growing) Build Americas Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel fitters / fabricators who take pride in safety, accuracy, and craftsmanshipand want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Code standards. Experience Required 2+ years structural steel fitting and fabrication experience AISC fabrication shop experience preferred Ability to read and interpret shop drawings and blueprints Strong focus on quality, accuracy, and OSHA safety Ability to work in ateam-driven, safety-first environmentSupporting continuous improvement initiatives Key Responsibilities Read and interpret shop drawings, blueprints, and welding symbols Layout, Fit and fabricate carbon steel bridge components to meet dimensional tolerances Perform grinding, arc gouging, cutting torch, and oxyfuel cutting Safelyoperateoverhead cranes, forklifts, and material handling equipment Maintain compliance with AISC, AWS D1.1 & D1.5, and OSHA standards Why JGM Work on iconic infrastructure projects that matter Safety and quality are non-negotiable Clear paths for skill development, advancement, and leadership A company that believes hard work should lead to financial stability and opportunity A place you can retire from Learn more about our Apprentice to Millionaire Program Benefits & Perks Competitive hourly pay ($23$36/hr) Medical, Dental & Vision Insurance PTO & Paid Holidays 401(k) with company match Life Insurance Short- & Long-Term Disability Employee Assistance Program Generous employee referral program Training and continuing education Fabrication Shop Perks Daily snack & drink allowance Annual safety boot allowance (on-site truck visit) Annual prescription safety glasses program Overtime available Lunch provided every other Friday Who Thrives Here Fitters and fabricators who care about safety, quality, and reputation Craftsmen who want more than a joba career building America Team players who want to grow skills, earnings, and leadership Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards. Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards.
07/23/2026
Full time
Job Description Job Description Salary: $23.00-$36.00 Depending on Experience Location: Sinking Spring, PA Pay: $23$36/hour (based on experience & skills) Schedule: 5:00 AM start 10-hour shifts 30 minute lunch Facility: 75,000 SF AISC Advanced Bridge Certified fabrication shop (growing) Build Americas Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel fitters / fabricators who take pride in safety, accuracy, and craftsmanshipand want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Code standards. Experience Required 2+ years structural steel fitting and fabrication experience AISC fabrication shop experience preferred Ability to read and interpret shop drawings and blueprints Strong focus on quality, accuracy, and OSHA safety Ability to work in ateam-driven, safety-first environmentSupporting continuous improvement initiatives Key Responsibilities Read and interpret shop drawings, blueprints, and welding symbols Layout, Fit and fabricate carbon steel bridge components to meet dimensional tolerances Perform grinding, arc gouging, cutting torch, and oxyfuel cutting Safelyoperateoverhead cranes, forklifts, and material handling equipment Maintain compliance with AISC, AWS D1.1 & D1.5, and OSHA standards Why JGM Work on iconic infrastructure projects that matter Safety and quality are non-negotiable Clear paths for skill development, advancement, and leadership A company that believes hard work should lead to financial stability and opportunity A place you can retire from Learn more about our Apprentice to Millionaire Program Benefits & Perks Competitive hourly pay ($23$36/hr) Medical, Dental & Vision Insurance PTO & Paid Holidays 401(k) with company match Life Insurance Short- & Long-Term Disability Employee Assistance Program Generous employee referral program Training and continuing education Fabrication Shop Perks Daily snack & drink allowance Annual safety boot allowance (on-site truck visit) Annual prescription safety glasses program Overtime available Lunch provided every other Friday Who Thrives Here Fitters and fabricators who care about safety, quality, and reputation Craftsmen who want more than a joba career building America Team players who want to grow skills, earnings, and leadership Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards. Company Description Build America's Bridges. Build a Career with Purpose. JGM Fabricators & Constructors is an AISC Advanced Bridge Certified Fabrication Shop expanding to support complex, high-profile bridge projects across the U.S. We are hiring structural steel welders who take pride in safety, quality, and precision-and want a career that supports long-term financial well-being. Our teams fabricate Lift Bridges, Railroad Bridges, Trestle Bridges, Bus Terminals, Main Spans, and Approaches, all built to AWS D1.5 Bridge Welding Code standards.