L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician B Job Code: 36934 Job Location: Redmond, WA Job Schedule: 2nd Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 3:30pm - 2am) Training will start on day shift prior to being assigned to second shift for approximately 2-3 months. This position includes 10% shift differential pay. Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Assembly will be on piece parts into completed sub-assembly using typical assembly tools, but could also include final assemblies, quality testing, re-work, etc. In our Redmond, WA, site (Seattle area), we fabricate, assemble, and test chemical and electric thrusters, as well as small scale propulsion systems. Our products enable a wide variety of missions from the exploration of our solar system to global communication and the surveillance of severe weather and wild fires. Essential Functions: Mechanical assembly and test of engines or other components/products as assigned. Small mechanical precision assembly. Handle precision clean parts within a laminar flow environment. Perform diversified, but semi-repetitive operations following standardized methods and procedures under changing conditions. Coordinate with maintenance, supervision and/or engineers in the set-up and calibration of equipment. Perform troubleshooting of mechanical assemblies, company manufactured tooling and pressure testing. Use and operate various computer systems and applicable software (such as retrieving work instructions or manufacturing module in ERP system). Read and interpret product drawings, process specifications, and department procedures. Provide assistance in developing methods and procedures to control or modify the manufacturing process, collect data, or assist in research work. Repair or make recommendations to solve equipment issues. Apply general rules to specific problems to come up with logical answers. Perform mathematical calculations accurately and quickly. Establish and maintain cooperative working relationships with the work team and those contacted in the course of work Effectively communicate to supervision/lead person, maintenance, engineering or other employees of the organization. Work with management, supervision or lead personnel to prioritize work and meet critical deadlines. Provide rapid support while following proper housekeeping and safety procedures. Other duties as assigned. Qualifications: Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0-2 years of prior related experience. Preferred Additional Skills: Understanding of electrical test equipment (DMM, oscilloscope, etc.). Knowledge of strippers, crimpers and installing solder splices. Certification to IPC 620 preferred. Familiarity with 5S and lean procedures. Ability and willingness to work other shifts and overtime as necessary. Oracle and Delmia experience. Knowledge of Laminar Flow environments and FOE/FOD controls a plus. Knowledge of mechanical assembly and test of electromechanical components. In compliance with pay transparency requirements, the salary range for this role in Washington is $22.83/hr - $42.54/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris announced on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business. This position has been identified as one that will transition to the new standalone company upon closing of the transaction. Until that time, L3Harris will continue its hiring activity within this business. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
07/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician B Job Code: 36934 Job Location: Redmond, WA Job Schedule: 2nd Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 3:30pm - 2am) Training will start on day shift prior to being assigned to second shift for approximately 2-3 months. This position includes 10% shift differential pay. Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Assembly will be on piece parts into completed sub-assembly using typical assembly tools, but could also include final assemblies, quality testing, re-work, etc. In our Redmond, WA, site (Seattle area), we fabricate, assemble, and test chemical and electric thrusters, as well as small scale propulsion systems. Our products enable a wide variety of missions from the exploration of our solar system to global communication and the surveillance of severe weather and wild fires. Essential Functions: Mechanical assembly and test of engines or other components/products as assigned. Small mechanical precision assembly. Handle precision clean parts within a laminar flow environment. Perform diversified, but semi-repetitive operations following standardized methods and procedures under changing conditions. Coordinate with maintenance, supervision and/or engineers in the set-up and calibration of equipment. Perform troubleshooting of mechanical assemblies, company manufactured tooling and pressure testing. Use and operate various computer systems and applicable software (such as retrieving work instructions or manufacturing module in ERP system). Read and interpret product drawings, process specifications, and department procedures. Provide assistance in developing methods and procedures to control or modify the manufacturing process, collect data, or assist in research work. Repair or make recommendations to solve equipment issues. Apply general rules to specific problems to come up with logical answers. Perform mathematical calculations accurately and quickly. Establish and maintain cooperative working relationships with the work team and those contacted in the course of work Effectively communicate to supervision/lead person, maintenance, engineering or other employees of the organization. Work with management, supervision or lead personnel to prioritize work and meet critical deadlines. Provide rapid support while following proper housekeeping and safety procedures. Other duties as assigned. Qualifications: Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0-2 years of prior related experience. Preferred Additional Skills: Understanding of electrical test equipment (DMM, oscilloscope, etc.). Knowledge of strippers, crimpers and installing solder splices. Certification to IPC 620 preferred. Familiarity with 5S and lean procedures. Ability and willingness to work other shifts and overtime as necessary. Oracle and Delmia experience. Knowledge of Laminar Flow environments and FOE/FOD controls a plus. Knowledge of mechanical assembly and test of electromechanical components. In compliance with pay transparency requirements, the salary range for this role in Washington is $22.83/hr - $42.54/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris announced on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business. This position has been identified as one that will transition to the new standalone company upon closing of the transaction. Until that time, L3Harris will continue its hiring activity within this business. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician C Job Code: 36935 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Assembly will be on piece parts into completed sub-assembly using typical assembly tools, but could also include final assemblies, quality testing, re-work, etc. In our Redmond, WA, site (Seattle area), we fabricate, assemble, and test chemical and electric thrusters, as well as small scale propulsion systems. Our products enable a wide variety of missions from the exploration of our solar system to global communication and the surveillance of severe weather and wild fires. Essential Functions: Mechanical assembly and test of engines or other components/products as assigned. Small mechanical precision assembly. Handle precision clean parts within a laminar flow environment. Perform diversified, but semi-repetitive operations following standardized methods and procedures under changing conditions. Coordinate with maintenance, supervision and/or engineers in the set-up and calibration of equipment. Perform troubleshooting of mechanical assemblies, company manufactured tooling and pressure testing. Use and operate various computer systems and applicable software (such as retrieving work instructions or manufacturing module in ERP system). Read and interpret product drawings, process specifications, and department procedures. Provide assistance in developing methods and procedures to control or modify the manufacturing process, collect data, or assist in research work. Repair or make recommendations to solve equipment issues. Apply general rules to specific problems to come up with logical answers. Perform mathematical calculations accurately and quickly. Establish and maintain cooperative working relationships with the work team and those contacted in the course of work Effectively communicate to supervision/lead person, maintenance, engineering or other employees of the organization. Work with management, supervision or lead personnel to prioritize work and meet critical deadlines. Provide rapid support while following proper housekeeping and safety procedures. Other duties as assigned; additional duties could include production of parts, metal fabrication, etc. Qualifications: Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience. Preferred Additional Skills: Understanding of electrical test equipment (DMM, oscilloscope, etc.). Knowledge of strippers, crimpers and installing solder splices. Certification to IPC 620 preferred. Familiarity with 5S and lean procedures. Ability and willingness to work other shifts and overtime as necessary. Oracle and Delmia experience. Knowledge of Laminar Flow environments and FOE/FOD controls a plus. Knowledge of mechanical assembly and test of electromechanical components. In compliance with pay transparency requirements, the salary range for this role in Washington is $27.40/hr - $49.04/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris announced on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business. This position has been identified as one that will transition to the new standalone company upon closing of the transaction. Until that time, L3Harris will continue its hiring activity within this business. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
07/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician C Job Code: 36935 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Assembly will be on piece parts into completed sub-assembly using typical assembly tools, but could also include final assemblies, quality testing, re-work, etc. In our Redmond, WA, site (Seattle area), we fabricate, assemble, and test chemical and electric thrusters, as well as small scale propulsion systems. Our products enable a wide variety of missions from the exploration of our solar system to global communication and the surveillance of severe weather and wild fires. Essential Functions: Mechanical assembly and test of engines or other components/products as assigned. Small mechanical precision assembly. Handle precision clean parts within a laminar flow environment. Perform diversified, but semi-repetitive operations following standardized methods and procedures under changing conditions. Coordinate with maintenance, supervision and/or engineers in the set-up and calibration of equipment. Perform troubleshooting of mechanical assemblies, company manufactured tooling and pressure testing. Use and operate various computer systems and applicable software (such as retrieving work instructions or manufacturing module in ERP system). Read and interpret product drawings, process specifications, and department procedures. Provide assistance in developing methods and procedures to control or modify the manufacturing process, collect data, or assist in research work. Repair or make recommendations to solve equipment issues. Apply general rules to specific problems to come up with logical answers. Perform mathematical calculations accurately and quickly. Establish and maintain cooperative working relationships with the work team and those contacted in the course of work Effectively communicate to supervision/lead person, maintenance, engineering or other employees of the organization. Work with management, supervision or lead personnel to prioritize work and meet critical deadlines. Provide rapid support while following proper housekeeping and safety procedures. Other duties as assigned; additional duties could include production of parts, metal fabrication, etc. Qualifications: Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience. Preferred Additional Skills: Understanding of electrical test equipment (DMM, oscilloscope, etc.). Knowledge of strippers, crimpers and installing solder splices. Certification to IPC 620 preferred. Familiarity with 5S and lean procedures. Ability and willingness to work other shifts and overtime as necessary. Oracle and Delmia experience. Knowledge of Laminar Flow environments and FOE/FOD controls a plus. Knowledge of mechanical assembly and test of electromechanical components. In compliance with pay transparency requirements, the salary range for this role in Washington is $27.40/hr - $49.04/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris announced on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business. This position has been identified as one that will transition to the new standalone company upon closing of the transaction. Until that time, L3Harris will continue its hiring activity within this business. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Job Description As a Cannon Crewmember in the Army National Guard, you join a team that ensures the U.S. maintains its battlefield superiority. You'll deliver decisive blows to the enemy using howitzers and learn how to use high-tech cannon artillery weapons systems, plus artillery tactics and strategy. And as your skills increase, so will your responsibilities. Advanced Crewmembers supervise other crewmembers in the distribution of ammunition, as well as manage cannon operations, training, and maintenance. Job Duties • Conducting wire and radio communications • Identifying target locations • Setting, loading, and firing artillery • Using computers to generate fire direction data • Operating heavy and light wheeled trucks and tracked vehicles • Transporting and managing artillery ammunition • Maintaining operational readiness of vehicles and equipment • Participate in reconnaissance operations Helpful Skills • Physically and mentally fit to perform under pressure • Ability to make quick decisions • Capable of working as a team member You'll become familiar with technology while you build strategic thinking and leadership skills that are in high-demand in the civilian workforce. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for a Cannon Crewmember requires 10 weeks of Basic Training, where you learn basic Soldiering skills. Then you will attend Advanced Individual Training (AIT), which consists of seven weeks of additional training. Part of this time is spent in a classroom and part in the field under simulated combat conditions. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 6085 ZIP Code: 2904 Job Category: Heavy Weapons Age Requirements: Must be between the ages of 17 and 35 general skills laborer team member
07/27/2026
Full time
Job Description As a Cannon Crewmember in the Army National Guard, you join a team that ensures the U.S. maintains its battlefield superiority. You'll deliver decisive blows to the enemy using howitzers and learn how to use high-tech cannon artillery weapons systems, plus artillery tactics and strategy. And as your skills increase, so will your responsibilities. Advanced Crewmembers supervise other crewmembers in the distribution of ammunition, as well as manage cannon operations, training, and maintenance. Job Duties • Conducting wire and radio communications • Identifying target locations • Setting, loading, and firing artillery • Using computers to generate fire direction data • Operating heavy and light wheeled trucks and tracked vehicles • Transporting and managing artillery ammunition • Maintaining operational readiness of vehicles and equipment • Participate in reconnaissance operations Helpful Skills • Physically and mentally fit to perform under pressure • Ability to make quick decisions • Capable of working as a team member You'll become familiar with technology while you build strategic thinking and leadership skills that are in high-demand in the civilian workforce. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for a Cannon Crewmember requires 10 weeks of Basic Training, where you learn basic Soldiering skills. Then you will attend Advanced Individual Training (AIT), which consists of seven weeks of additional training. Part of this time is spent in a classroom and part in the field under simulated combat conditions. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 6085 ZIP Code: 2904 Job Category: Heavy Weapons Age Requirements: Must be between the ages of 17 and 35 general skills laborer team member
Job Description Communication is the pulse of Army National Guard units, and it's up to the Signal Support Systems Specialist to ensure the information keeps flowing so the military doesn't miss a beat. Signal Support Systems Specialists are responsible for integrating signal systems and networks; performing signal support functions and unit-level maintenance on authorized signal equipment; and installing, operating, and maintaining radio and data distribution systems. Advanced team members supervise and train other Soldiers; maintain and install signal support systems and terminal devices; provide technical assistance and training for automation and communications equipment; prepare maintenance and supply requests for unit-level signal support; and operate and perform preventative maintenance checks and services on assigned vehicles. Job Duties • Maintain radio and data distribution systems • Perform signal support functions and technical assistance for computer systems • Provide technical assistance and training for local area networks • Maintenance for equipment, terminal devices, assigned vehicles, and power generators Some of the Skills You'll Learn • Mechanical and electrical principles • Preventive maintenance procedures • Line installation and wiring techniques • Communication security policies and procedures Helpful Skills • Interest in working with electronic equipment • Interest in problem solving Through your training, you will develop the skills and experience to enjoy a civilian career with companies that produce communications and electronic equipment. Additional study and two years of electronics experience will also qualify you for certification as an Associate Certified Electronics Technician. Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for Signal Support Systems Specialists consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 18 weeks of Advanced Individual Training (AIT) which will include a combination of hands-on and classroom training. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 2413 ZIP Code: 66027 Job Category: Technology and Networking Age Requirements: Must be between the ages of 17 and 35 electronic assembly technician relay electronic integrated systems
07/27/2026
Full time
Job Description Communication is the pulse of Army National Guard units, and it's up to the Signal Support Systems Specialist to ensure the information keeps flowing so the military doesn't miss a beat. Signal Support Systems Specialists are responsible for integrating signal systems and networks; performing signal support functions and unit-level maintenance on authorized signal equipment; and installing, operating, and maintaining radio and data distribution systems. Advanced team members supervise and train other Soldiers; maintain and install signal support systems and terminal devices; provide technical assistance and training for automation and communications equipment; prepare maintenance and supply requests for unit-level signal support; and operate and perform preventative maintenance checks and services on assigned vehicles. Job Duties • Maintain radio and data distribution systems • Perform signal support functions and technical assistance for computer systems • Provide technical assistance and training for local area networks • Maintenance for equipment, terminal devices, assigned vehicles, and power generators Some of the Skills You'll Learn • Mechanical and electrical principles • Preventive maintenance procedures • Line installation and wiring techniques • Communication security policies and procedures Helpful Skills • Interest in working with electronic equipment • Interest in problem solving Through your training, you will develop the skills and experience to enjoy a civilian career with companies that produce communications and electronic equipment. Additional study and two years of electronics experience will also qualify you for certification as an Associate Certified Electronics Technician. Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for Signal Support Systems Specialists consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 18 weeks of Advanced Individual Training (AIT) which will include a combination of hands-on and classroom training. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 2413 ZIP Code: 66027 Job Category: Technology and Networking Age Requirements: Must be between the ages of 17 and 35 electronic assembly technician relay electronic integrated systems
Job Description As a Cannon Crewmember in the Army National Guard, you join a team that ensures the U.S. maintains its battlefield superiority. You'll deliver decisive blows to the enemy using howitzers and learn how to use high-tech cannon artillery weapons systems, plus artillery tactics and strategy. And as your skills increase, so will your responsibilities. Advanced Crewmembers supervise other crewmembers in the distribution of ammunition, as well as manage cannon operations, training, and maintenance. Job Duties • Conducting wire and radio communications • Identifying target locations • Setting, loading, and firing artillery • Using computers to generate fire direction data • Operating heavy and light wheeled trucks and tracked vehicles • Transporting and managing artillery ammunition • Maintaining operational readiness of vehicles and equipment • Participate in reconnaissance operations Helpful Skills • Physically and mentally fit to perform under pressure • Ability to make quick decisions • Capable of working as a team member You'll become familiar with technology while you build strategic thinking and leadership skills that are in high-demand in the civilian workforce. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for a Cannon Crewmember requires 10 weeks of Basic Training, where you learn basic Soldiering skills. Then you will attend Advanced Individual Training (AIT), which consists of seven weeks of additional training. Part of this time is spent in a classroom and part in the field under simulated combat conditions. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 3988 ZIP Code: 39090 Job Category: Heavy Weapons Age Requirements: Must be between the ages of 17 and 35 general skills laborer team member
07/27/2026
Full time
Job Description As a Cannon Crewmember in the Army National Guard, you join a team that ensures the U.S. maintains its battlefield superiority. You'll deliver decisive blows to the enemy using howitzers and learn how to use high-tech cannon artillery weapons systems, plus artillery tactics and strategy. And as your skills increase, so will your responsibilities. Advanced Crewmembers supervise other crewmembers in the distribution of ammunition, as well as manage cannon operations, training, and maintenance. Job Duties • Conducting wire and radio communications • Identifying target locations • Setting, loading, and firing artillery • Using computers to generate fire direction data • Operating heavy and light wheeled trucks and tracked vehicles • Transporting and managing artillery ammunition • Maintaining operational readiness of vehicles and equipment • Participate in reconnaissance operations Helpful Skills • Physically and mentally fit to perform under pressure • Ability to make quick decisions • Capable of working as a team member You'll become familiar with technology while you build strategic thinking and leadership skills that are in high-demand in the civilian workforce. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for a Cannon Crewmember requires 10 weeks of Basic Training, where you learn basic Soldiering skills. Then you will attend Advanced Individual Training (AIT), which consists of seven weeks of additional training. Part of this time is spent in a classroom and part in the field under simulated combat conditions. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 3988 ZIP Code: 39090 Job Category: Heavy Weapons Age Requirements: Must be between the ages of 17 and 35 general skills laborer team member
Your Mission As a Maintenance Tech A your role is to ensure the continuous and efficient operation of our production facilities. This vital role involves performing routine, preventive, and predictive maintenance on equipment and facilities across our two plants. By maintaining high standards of precision and reliability in our injection molding and CNC machinery, the Maintenance Tech B supports the production of high-quality parts, contributing to our overall success and commitment to excellence. How you will make a difference Effective Problem-Solving: By reviewing all maintenance work requests and diagnosing complex problems, you will address and fix issues promptly, preventing extended equipment downtime and ensuring production continuity. Communication and Coordination: You will have effective communication with supervisors on priorities ensures that the most critical equipment gets attention first. Collaborating with other team members and external experts will enhance the quality of repairs and maintenance. Data-Driven Maintenance: Keeping meticulous maintenance records to provide valuable data for analysis and reporting, allowing for informed decision-making and identifying patterns or recurring issues that can be proactively addressed. Preventive Maintenance: Executing and planning preventive maintenance work orders helps to minimize unexpected breakdowns, reducing overall maintenance costs and ensuring the longevity of the machinery. Collaborative Efforts: Balancing perseverance with timely calls for support when needed ensures that repairs are effective and efficient, leveraging the collective knowledge and skills of the team to maintain high operational standards. What you should be good at Experience and Expertise: Minimum of five years of experience in equipment maintenance and demonstrated ability to troubleshoot complex machine issues using input from operators, technical manuals, and alarm codes. Technical Skills: Proficient in mechanical, electrical, electronic, PLC logic, hydraulics, and pneumatics. Skilled in CNC equipment repair and maintenance. Ability to read electrical voltage, resistance, and amperage with a meter. Proficient in sheet metal fabrication and welding. Knowledge in machine alignment Machining Background: Familiarity with machining processes and tools is a plus. Analytical and Technical Proficiency: Ability to read and interpret mechanical and electrical prints and proficient in using measuring instruments like calipers, indicators, micrometers, and plug gauges. Safety and Operational Skills: Knowledge of industrial plant safety protocols. Ability to operate an industrial lift truck and Competence in both metric and imperial measurement systems. What you can look forward to Career Stability: With over 130 years of industry leadership, Hoerbiger offers the security of a long-established company with a forward-looking vision. Financial Stability and Rewarding Compensation We recognize and value your contributions with competitive salaries and local fringe benefits. Supportive Teamwork: A positive atmosphere and a collaborative environment, where you'll experience mutual support among colleagues. Professional and Personal Growth: With a polite and respectful culture, there's often a greater emphasis on personal development and continuous learning. Recognition and Appreciation: Being part of a polite and appreciative team means that your efforts and achievements are recognized and celebrated. Who we are Join our global team of over 6,000 colleagues and make a difference every day. Contribute to innovative solutions that save lives, reduce emissions, and drive progress in key industries like energy, automotive, and safety technology. Guided by our core values - Pioneering Spirit, Courage, Fairness, and Closeness - we are ENABLING CHANGE. FOR A BETTER TOMORROW. With opportunities to grow, learn, and collaborate across 43 countries and more than 133 locations, you'll be part of a culture that values your ideas and your impact. Ready to make a difference? Apply today and become part of our journey.
07/27/2026
Full time
Your Mission As a Maintenance Tech A your role is to ensure the continuous and efficient operation of our production facilities. This vital role involves performing routine, preventive, and predictive maintenance on equipment and facilities across our two plants. By maintaining high standards of precision and reliability in our injection molding and CNC machinery, the Maintenance Tech B supports the production of high-quality parts, contributing to our overall success and commitment to excellence. How you will make a difference Effective Problem-Solving: By reviewing all maintenance work requests and diagnosing complex problems, you will address and fix issues promptly, preventing extended equipment downtime and ensuring production continuity. Communication and Coordination: You will have effective communication with supervisors on priorities ensures that the most critical equipment gets attention first. Collaborating with other team members and external experts will enhance the quality of repairs and maintenance. Data-Driven Maintenance: Keeping meticulous maintenance records to provide valuable data for analysis and reporting, allowing for informed decision-making and identifying patterns or recurring issues that can be proactively addressed. Preventive Maintenance: Executing and planning preventive maintenance work orders helps to minimize unexpected breakdowns, reducing overall maintenance costs and ensuring the longevity of the machinery. Collaborative Efforts: Balancing perseverance with timely calls for support when needed ensures that repairs are effective and efficient, leveraging the collective knowledge and skills of the team to maintain high operational standards. What you should be good at Experience and Expertise: Minimum of five years of experience in equipment maintenance and demonstrated ability to troubleshoot complex machine issues using input from operators, technical manuals, and alarm codes. Technical Skills: Proficient in mechanical, electrical, electronic, PLC logic, hydraulics, and pneumatics. Skilled in CNC equipment repair and maintenance. Ability to read electrical voltage, resistance, and amperage with a meter. Proficient in sheet metal fabrication and welding. Knowledge in machine alignment Machining Background: Familiarity with machining processes and tools is a plus. Analytical and Technical Proficiency: Ability to read and interpret mechanical and electrical prints and proficient in using measuring instruments like calipers, indicators, micrometers, and plug gauges. Safety and Operational Skills: Knowledge of industrial plant safety protocols. Ability to operate an industrial lift truck and Competence in both metric and imperial measurement systems. What you can look forward to Career Stability: With over 130 years of industry leadership, Hoerbiger offers the security of a long-established company with a forward-looking vision. Financial Stability and Rewarding Compensation We recognize and value your contributions with competitive salaries and local fringe benefits. Supportive Teamwork: A positive atmosphere and a collaborative environment, where you'll experience mutual support among colleagues. Professional and Personal Growth: With a polite and respectful culture, there's often a greater emphasis on personal development and continuous learning. Recognition and Appreciation: Being part of a polite and appreciative team means that your efforts and achievements are recognized and celebrated. Who we are Join our global team of over 6,000 colleagues and make a difference every day. Contribute to innovative solutions that save lives, reduce emissions, and drive progress in key industries like energy, automotive, and safety technology. Guided by our core values - Pioneering Spirit, Courage, Fairness, and Closeness - we are ENABLING CHANGE. FOR A BETTER TOMORROW. With opportunities to grow, learn, and collaborate across 43 countries and more than 133 locations, you'll be part of a culture that values your ideas and your impact. Ready to make a difference? Apply today and become part of our journey.
We are seeking a dependable and motivated Maintenance Technician to perform routine maintenance and minor repairs for residential communities. This position is ideal for someone with basic maintenance experience who enjoys hands-on work and takes pride in keeping properties clean, safe, and well-maintained.
07/27/2026
Full time
We are seeking a dependable and motivated Maintenance Technician to perform routine maintenance and minor repairs for residential communities. This position is ideal for someone with basic maintenance experience who enjoys hands-on work and takes pride in keeping properties clean, safe, and well-maintained.
If you are passionate and skilled in auto body work and want a work atmosphere that is not stressful and full of politics and hassles? Then this position is right for you. We're looking for a experienced individual who can prep and paint, perform bodywork, and is knowlegable in collision repair and someone who is well versed in automotive body repair and collision, that can help maintain the shop and display a positive attitude while working with others. Our Paint and/or Auto Body Technician will be responsible for paint, auto body repair, collision, and paint repair, as well as floor maintenance. The Paint Tech and/or Auto Body Technician will also be required to have reliable transportation, have pride in their work and be able to work independently. If you feel that this describes you and you want to work at the best auto body shop around then give us a call or visit our website for more information:
07/27/2026
Full time
If you are passionate and skilled in auto body work and want a work atmosphere that is not stressful and full of politics and hassles? Then this position is right for you. We're looking for a experienced individual who can prep and paint, perform bodywork, and is knowlegable in collision repair and someone who is well versed in automotive body repair and collision, that can help maintain the shop and display a positive attitude while working with others. Our Paint and/or Auto Body Technician will be responsible for paint, auto body repair, collision, and paint repair, as well as floor maintenance. The Paint Tech and/or Auto Body Technician will also be required to have reliable transportation, have pride in their work and be able to work independently. If you feel that this describes you and you want to work at the best auto body shop around then give us a call or visit our website for more information:
Find your calling at Mercy! This is an entry-level position requiring basic knowledge of boiler, HVAC, refrigeration, control system maintenance and operation, plumbing, electricity, carpentry, and painting. It is recommended that incumbents attend one or two years of trade school to prepare them for advancement opportunities. The Facility Systems Technician I position will allow the incumbent to learn operations for HVAC, refrigeration systems, plumbing, electricity, work practices, safety procedures, and become familiar with the respective equipment regulatory requirements. This position will also provide an opportunity to learn proper use of basic tools and equipment necessary to maintain and troubleshoot HVAC and refrigeration systems. This position will support small and mid-size hospitals, critical access hospitals, small inpatient/outpatient facilities, and clinics. The Facility Systems Technician provides the necessary skill to operate, maintain, and repair various electrical/plumbing systems, movable equipment, physical plant equipment, furniture, walls, ceilings, and floors. Utilizes exceptional customer service and communication skills. The purpose of this position is to ensure a safe working environment and support an exceptional Environment of Care for Mercy. Position Details: This is a full time position at Mercy Aurora Benefit Eligible Hours: 7:30a-4p Licensure: - Valid Drivers License for all Mercy locations - Mercy Arkansas Hospitals require High Pressure Boiler Operators License administered by Arkansas Dept. of Labor and Licensing where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma City where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma Dept. of Labor where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Class C Tank Operator Training and Certification required for all Mercy locations. Must achieve certification within 90 days of employment. - Fire door maintenance training program with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. - UL fire stop training with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. Experience: This is an entry-level position with a preference of 1 or more years commercial experience working with any of the following equipment: HVAC, boilers, and refrigeration equipment. Other Skills and Knowledge: - Requires oral and written communication skills to communicate with customers and follow instructions. - Verbal ability required to read and understand technical manuals. - Numerical ability required to make calculations for testing, installation, measurement, estimation and repair of equipment. - Ability to prioritize work assignments, conceptualize and formulate finished product. - Form perception is required when measuring and installing parts and equipment. - Spatial ability required to understand forms and relationships when working from blueprints or specifications. - Requires knowledge and use of various computer software such as Outlook, TMS and/or Nuvolo. - Ability to manage time and materials efficiently. Completes work assignments in a high-quality manner and the lowest cost to Mercy. - Requires exceptional customer service skills and ability to achieve department goals. - Incumbent must achieve favorable results on both oral and written competency exam prior to advancing to Facility Systems Technician II. - Requires general manual dexterity, basic math knowledge, and mechanical aptitude. - Exposure to extreme temperatures, electric shock, and loud noise. Preferred Qualifications Education: High school diploma or equivalent preferred. 2 or more years of training in a Technical or Vocational School. Licensure: Boiler, HVAC, or Refrigeration. Electrical and/or Plumbing. Experience: 1 or more years working as a maintenance technician in a healthcare, educational, or industrial setting. Certification/Registration: EPA approved Universal Certification for handling Refrigerants Must be trained to NFPA 80 regulations for fire door inspection and maintenance. Must be trained to UL standards for fire stopping. ASSE 6040 training for medical gas maintenance Other Skills and Knowledge: Why Mercy? From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period. Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
07/27/2026
Full time
Find your calling at Mercy! This is an entry-level position requiring basic knowledge of boiler, HVAC, refrigeration, control system maintenance and operation, plumbing, electricity, carpentry, and painting. It is recommended that incumbents attend one or two years of trade school to prepare them for advancement opportunities. The Facility Systems Technician I position will allow the incumbent to learn operations for HVAC, refrigeration systems, plumbing, electricity, work practices, safety procedures, and become familiar with the respective equipment regulatory requirements. This position will also provide an opportunity to learn proper use of basic tools and equipment necessary to maintain and troubleshoot HVAC and refrigeration systems. This position will support small and mid-size hospitals, critical access hospitals, small inpatient/outpatient facilities, and clinics. The Facility Systems Technician provides the necessary skill to operate, maintain, and repair various electrical/plumbing systems, movable equipment, physical plant equipment, furniture, walls, ceilings, and floors. Utilizes exceptional customer service and communication skills. The purpose of this position is to ensure a safe working environment and support an exceptional Environment of Care for Mercy. Position Details: This is a full time position at Mercy Aurora Benefit Eligible Hours: 7:30a-4p Licensure: - Valid Drivers License for all Mercy locations - Mercy Arkansas Hospitals require High Pressure Boiler Operators License administered by Arkansas Dept. of Labor and Licensing where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma City where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Mercy OKC Hospital requires Class II Boiler Operator's License administered by Oklahoma Dept. of Labor where boilers are installed. Incumbents must have required license prior to advancing to Facility Systems Technician II, when applicable. - Class C Tank Operator Training and Certification required for all Mercy locations. Must achieve certification within 90 days of employment. - Fire door maintenance training program with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. - UL fire stop training with certificate of completion. Incumbents must have training prior to advancing to Facility Systems Technician II. Experience: This is an entry-level position with a preference of 1 or more years commercial experience working with any of the following equipment: HVAC, boilers, and refrigeration equipment. Other Skills and Knowledge: - Requires oral and written communication skills to communicate with customers and follow instructions. - Verbal ability required to read and understand technical manuals. - Numerical ability required to make calculations for testing, installation, measurement, estimation and repair of equipment. - Ability to prioritize work assignments, conceptualize and formulate finished product. - Form perception is required when measuring and installing parts and equipment. - Spatial ability required to understand forms and relationships when working from blueprints or specifications. - Requires knowledge and use of various computer software such as Outlook, TMS and/or Nuvolo. - Ability to manage time and materials efficiently. Completes work assignments in a high-quality manner and the lowest cost to Mercy. - Requires exceptional customer service skills and ability to achieve department goals. - Incumbent must achieve favorable results on both oral and written competency exam prior to advancing to Facility Systems Technician II. - Requires general manual dexterity, basic math knowledge, and mechanical aptitude. - Exposure to extreme temperatures, electric shock, and loud noise. Preferred Qualifications Education: High school diploma or equivalent preferred. 2 or more years of training in a Technical or Vocational School. Licensure: Boiler, HVAC, or Refrigeration. Electrical and/or Plumbing. Experience: 1 or more years working as a maintenance technician in a healthcare, educational, or industrial setting. Certification/Registration: EPA approved Universal Certification for handling Refrigerants Must be trained to NFPA 80 regulations for fire door inspection and maintenance. Must be trained to UL standards for fire stopping. ASSE 6040 training for medical gas maintenance Other Skills and Knowledge: Why Mercy? From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period. Join a caring, collaborative team where your voice matters. At Mercy, you'll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you'll grow with us.
The Jasper, a luxury Class A multifamily community in Charleston, South Carolina, is seeking two skilled Property Maintenance Technicians to join our team. The Property Maintenance Technician is responsible for helping ensure the overall maintenance, repair, and upkeep of the community. This role supports the appearance, functionality, and safety of the property through timely service, preventative maintenance, and attention to detail. If you are a self-motivated individual with a passion for property maintenance, we encourage you to apply for this exciting opportunity. We are offering a sign on bonus! The Beach Company offers competitive pay, an excellent benefit package, a matching 401K plan, generous PTO, paid holidays and opportunities for growth within the company. All Beach Company employees are provided with free, garage parking at The Jasper. Join a team committed to providing an exceptional living experience in one of Charleston's premier luxury communities.
07/27/2026
Full time
The Jasper, a luxury Class A multifamily community in Charleston, South Carolina, is seeking two skilled Property Maintenance Technicians to join our team. The Property Maintenance Technician is responsible for helping ensure the overall maintenance, repair, and upkeep of the community. This role supports the appearance, functionality, and safety of the property through timely service, preventative maintenance, and attention to detail. If you are a self-motivated individual with a passion for property maintenance, we encourage you to apply for this exciting opportunity. We are offering a sign on bonus! The Beach Company offers competitive pay, an excellent benefit package, a matching 401K plan, generous PTO, paid holidays and opportunities for growth within the company. All Beach Company employees are provided with free, garage parking at The Jasper. Join a team committed to providing an exceptional living experience in one of Charleston's premier luxury communities.
TEN Transportation Equipment Network
Highspire, Pennsylvania
Mobile Trailer Technician / Mobile Service Mechanic Mobile Trailer Repair - Trailer Maintenance - Weekly Pay - $3000 Sign-On Bonus About TEN - Transportation Equipment Network TEN (Transportation Equipment Network) is the North American leader in transportation equipment, trailer leasing, maintenance, and fleet solutions. We operate one of the largest and most diverse trailer fleets in the industry, with over 80,000 trailers, supported by 240 service bays, 118 mobile service trucks, and 430+ skilled technicians across North America. Backed by decades of industry expertise and a strong commitment to safety, performance, and innovation, TEN provides full-service trailer maintenance and repair solutions that keep commercial fleets moving safely and efficiently. Position: Mobile Trailer Technician The Mobile Trailer Technician (also known as Trailer Mechanic, Trailer Repair Technician, or Mobile Fleet Technician) is responsible for performing on-site trailer inspections, diagnostics, maintenance, and repairs at customer locations. This role is ideal for hands-on technicians with experience in trailer systems, DOT compliance, mechanical repair, welding, electrical systems, and brake repairs, who enjoy working independently in a fast-paced, mobile service environment. Key Responsibilities Respond to mobile service calls and perform on-site trailer repairs Inspect, diagnose, and troubleshoot mechanical, electrical, and structural trailer issues Perform preventive maintenance, safety inspections, and DOT-related repairs Repair and replace components including: Brake systems Suspension systems Electrical wiring and lighting Frames, floors, doors, and structural components Perform welding and fabrication as required Complete and document work orders and service reports Monitor and manage parts inventory on service vehicles Ensure all trailers meet safety regulations and compliance standards Maintain a clean, safe, and organized work environment Stay current with industry standards and best practices Trailer Types & Equipment Serviced Dry van trailers Flatbed trailers Utility trailers Cargo and commercial trailers Qualifications & Skills Proven experience as a Trailer Technician, Trailer Mechanic, or Fleet Maintenance Technician Strong mechanical aptitude with knowledge of trailer systems and components Experience with welding, fabrication, brake systems, and electrical troubleshooting Familiarity with hand tools, power tools, and diagnostic equipment Ability to work independently in a mobile/on-site service role Strong problem-solving skills and attention to detail Commitment to workplace safety and compliance CDL or DOT experience preferred but not required Why Work With Us Industry-leading tools, equipment, and support Opportunities for growth, technical training, and career advancement Work with a trusted leader in the transportation and fleet service industry Benefits: We believe in rewarding our employees for their exceptional skills and dedication. That's why we offer our employees a range of attractive benefits that set us apart from the rest: WEEKLY PAY! Up to $6,000 total Sign on/Retention Bonus Quarterly bonuses Comprehensive health and dental plans with flexible spending accounts, including company contributions Paid time off and paid holidays Equipment allowances, education reimbursements, & certification programs 401k with company match and profit sharing Recognition programs and service awards TEN (Transportation Equipment Network) is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. SEO Keyword Coverage (Behind the Scenes) Mobile Trailer Technician, Trailer Mechanic, Trailer Repair Technician, Fleet Technician, DOT Trailer Repair, Trailer Maintenance, Mobile Mechanic, Welding, Brake Repair, Electrical Systems, Commercial Trailer Repair, Weekly Pay Mechanic Jobs
07/27/2026
Mobile Trailer Technician / Mobile Service Mechanic Mobile Trailer Repair - Trailer Maintenance - Weekly Pay - $3000 Sign-On Bonus About TEN - Transportation Equipment Network TEN (Transportation Equipment Network) is the North American leader in transportation equipment, trailer leasing, maintenance, and fleet solutions. We operate one of the largest and most diverse trailer fleets in the industry, with over 80,000 trailers, supported by 240 service bays, 118 mobile service trucks, and 430+ skilled technicians across North America. Backed by decades of industry expertise and a strong commitment to safety, performance, and innovation, TEN provides full-service trailer maintenance and repair solutions that keep commercial fleets moving safely and efficiently. Position: Mobile Trailer Technician The Mobile Trailer Technician (also known as Trailer Mechanic, Trailer Repair Technician, or Mobile Fleet Technician) is responsible for performing on-site trailer inspections, diagnostics, maintenance, and repairs at customer locations. This role is ideal for hands-on technicians with experience in trailer systems, DOT compliance, mechanical repair, welding, electrical systems, and brake repairs, who enjoy working independently in a fast-paced, mobile service environment. Key Responsibilities Respond to mobile service calls and perform on-site trailer repairs Inspect, diagnose, and troubleshoot mechanical, electrical, and structural trailer issues Perform preventive maintenance, safety inspections, and DOT-related repairs Repair and replace components including: Brake systems Suspension systems Electrical wiring and lighting Frames, floors, doors, and structural components Perform welding and fabrication as required Complete and document work orders and service reports Monitor and manage parts inventory on service vehicles Ensure all trailers meet safety regulations and compliance standards Maintain a clean, safe, and organized work environment Stay current with industry standards and best practices Trailer Types & Equipment Serviced Dry van trailers Flatbed trailers Utility trailers Cargo and commercial trailers Qualifications & Skills Proven experience as a Trailer Technician, Trailer Mechanic, or Fleet Maintenance Technician Strong mechanical aptitude with knowledge of trailer systems and components Experience with welding, fabrication, brake systems, and electrical troubleshooting Familiarity with hand tools, power tools, and diagnostic equipment Ability to work independently in a mobile/on-site service role Strong problem-solving skills and attention to detail Commitment to workplace safety and compliance CDL or DOT experience preferred but not required Why Work With Us Industry-leading tools, equipment, and support Opportunities for growth, technical training, and career advancement Work with a trusted leader in the transportation and fleet service industry Benefits: We believe in rewarding our employees for their exceptional skills and dedication. That's why we offer our employees a range of attractive benefits that set us apart from the rest: WEEKLY PAY! Up to $6,000 total Sign on/Retention Bonus Quarterly bonuses Comprehensive health and dental plans with flexible spending accounts, including company contributions Paid time off and paid holidays Equipment allowances, education reimbursements, & certification programs 401k with company match and profit sharing Recognition programs and service awards TEN (Transportation Equipment Network) is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. SEO Keyword Coverage (Behind the Scenes) Mobile Trailer Technician, Trailer Mechanic, Trailer Repair Technician, Fleet Technician, DOT Trailer Repair, Trailer Maintenance, Mobile Mechanic, Welding, Brake Repair, Electrical Systems, Commercial Trailer Repair, Weekly Pay Mechanic Jobs
JOB SUMMARY This role supervises the implementation of food safety and quality assurance (FSQA) support/evaluation programs and inspection/audit procedures (including technicians) to ensure compliance of products and processes to corporate and regulatory requirements at a Sysco specialty meat and/or seafood company. In addition, the incumbent will assist with FSQA execution of source supplier approval, product sourcing functions, produced products, plant sanitation and FSQA related regulatory interaction for the company. RESPONSIBILITIES Administer the implementation of food safety and quality assurance (FSQA) programs including hazard analysis and critical control point (HACCP) program, sanitation standard operating procedures, pest control, good manufacturing practices, approved supplier program, foreign material control, plant sanitation, chemical control, product quality assurance, FSQA customer complaints, and food defense and security. Supervise or assist employee training of FSQA programs, policies, and procedures. Oversee or aid recall and traceability programs including mock recalls. Direct the implementation of independent FSQA audit program - safe quality food (SQF) audits. Assist when necessary for product evaluations, plant visits, and supplier/customer communication to assist other staff members. Assist as needed in any manner capable of during emergencies the plant president or general manager (GM) determines are paramount to the business. Frequently interacts with the following: Sysco specialty meat company(SSMC)/Sysco specialty seafood company (SSSC) personnel, operations, sales, transportation and maintenance as well as Sysco operating companies, and supplier/customer personnel at the line level. QUALIFICATIONS Education High school diploma or equivalent. Experience 1-5 years meat and/or seafood industry (as appropriate). FSQA experience at a federal CFIA/FDA meat and/or seafood processing plant (as appropriate). Formal job training in total quality management (TQM) principles, standard procedure call (SPC), HACCP concepts, CFIA/FDA regulations would be beneficial. Formal quality and sensory analysis training would be helpful. Raw meat or seafood industry experience will be accepted in place of combined experience. Certificates, Licenses, and Registrations Valid driver's license. Safe quality food (SQF) practitioner or equivalent global food safety initiative (GFSI) scheme experience. Meat and/or Seafood HACCP Certified (as appropriate). Professional Skills Ability to use personal computers, lab equipment, food preparation equipment, and office communication equipment. Language Skills Ability to write reports, basic business correspondence, as well as to effectively present information and respond to questions from managers. Mathematical Skills Must demonstrate the ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals, as well as can compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Skills Demonstrate the ability to define problems, collect data and establish facts. Ability to interpret an extensive variety of technical instructions. Physical Demand The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to talk or hear. Frequently is required to use hands to finger, handle, or feel objects, tools, or controls. Occasionally required to stand; walk; sit; reach with hands and arms; stoop, kneel, crouch, or crawl; and taste or smell. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Plant audits and inspections may require lifting of products up to 100 pounds and inspection requires working in a production environment on a moving line, lifting cartons, and visual inspection. Corrected vision required for sensory analysis to identify color, clarity. Warehouse and plant audit also requires close and distance vision to judge GMPs; peripheral vision and depth perception mandatory for safety. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently exposed to fumes or airborne particles. Occasionally works near mechanical parts and in high, precarious places and is occasionally exposed to wet and/or humid conditions, extreme cold, and risk of radiation. The noise level in the work environment is usually moderate. Plant audits/inspections and working at remote in-transit processing facilities and Sysco operating companies contain both moderate/loud noise and exposure to fumes and mechanical hazards.
07/27/2026
Full time
JOB SUMMARY This role supervises the implementation of food safety and quality assurance (FSQA) support/evaluation programs and inspection/audit procedures (including technicians) to ensure compliance of products and processes to corporate and regulatory requirements at a Sysco specialty meat and/or seafood company. In addition, the incumbent will assist with FSQA execution of source supplier approval, product sourcing functions, produced products, plant sanitation and FSQA related regulatory interaction for the company. RESPONSIBILITIES Administer the implementation of food safety and quality assurance (FSQA) programs including hazard analysis and critical control point (HACCP) program, sanitation standard operating procedures, pest control, good manufacturing practices, approved supplier program, foreign material control, plant sanitation, chemical control, product quality assurance, FSQA customer complaints, and food defense and security. Supervise or assist employee training of FSQA programs, policies, and procedures. Oversee or aid recall and traceability programs including mock recalls. Direct the implementation of independent FSQA audit program - safe quality food (SQF) audits. Assist when necessary for product evaluations, plant visits, and supplier/customer communication to assist other staff members. Assist as needed in any manner capable of during emergencies the plant president or general manager (GM) determines are paramount to the business. Frequently interacts with the following: Sysco specialty meat company(SSMC)/Sysco specialty seafood company (SSSC) personnel, operations, sales, transportation and maintenance as well as Sysco operating companies, and supplier/customer personnel at the line level. QUALIFICATIONS Education High school diploma or equivalent. Experience 1-5 years meat and/or seafood industry (as appropriate). FSQA experience at a federal CFIA/FDA meat and/or seafood processing plant (as appropriate). Formal job training in total quality management (TQM) principles, standard procedure call (SPC), HACCP concepts, CFIA/FDA regulations would be beneficial. Formal quality and sensory analysis training would be helpful. Raw meat or seafood industry experience will be accepted in place of combined experience. Certificates, Licenses, and Registrations Valid driver's license. Safe quality food (SQF) practitioner or equivalent global food safety initiative (GFSI) scheme experience. Meat and/or Seafood HACCP Certified (as appropriate). Professional Skills Ability to use personal computers, lab equipment, food preparation equipment, and office communication equipment. Language Skills Ability to write reports, basic business correspondence, as well as to effectively present information and respond to questions from managers. Mathematical Skills Must demonstrate the ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals, as well as can compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Skills Demonstrate the ability to define problems, collect data and establish facts. Ability to interpret an extensive variety of technical instructions. Physical Demand The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to talk or hear. Frequently is required to use hands to finger, handle, or feel objects, tools, or controls. Occasionally required to stand; walk; sit; reach with hands and arms; stoop, kneel, crouch, or crawl; and taste or smell. Must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Plant audits and inspections may require lifting of products up to 100 pounds and inspection requires working in a production environment on a moving line, lifting cartons, and visual inspection. Corrected vision required for sensory analysis to identify color, clarity. Warehouse and plant audit also requires close and distance vision to judge GMPs; peripheral vision and depth perception mandatory for safety. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently exposed to fumes or airborne particles. Occasionally works near mechanical parts and in high, precarious places and is occasionally exposed to wet and/or humid conditions, extreme cold, and risk of radiation. The noise level in the work environment is usually moderate. Plant audits/inspections and working at remote in-transit processing facilities and Sysco operating companies contain both moderate/loud noise and exposure to fumes and mechanical hazards.
Additional Information Job Number Job CategoryEngineering & Facilities Location2365 Kaanapali Pkwy, Lahaina, Hawaii, United States, 96761 VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $33.11-$33.11 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand's unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
07/27/2026
Full time
Additional Information Job Number Job CategoryEngineering & Facilities Location2365 Kaanapali Pkwy, Lahaina, Hawaii, United States, 96761 VIEW ON MAP ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $33.11-$33.11 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand's unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician B Job Code: 36929 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Assembly will be on piece parts into completed sub-assembly using typical assembly tools, but could also include final assemblies, quality testing, re-work, etc. In our Redmond, WA, site (Seattle area), we fabricate, assemble, and test chemical and electric thrusters, as well as small scale propulsion systems. Our products enable a wide variety of missions from the exploration of our solar system to global communication and the surveillance of severe weather and wild fires. Essential Functions: Mechanical assembly and test of engines or other components/products as assigned. Small mechanical precision assembly. Handle precision clean parts within a laminar flow environment. Perform diversified, but semi-repetitive operations following standardized methods and procedures under changing conditions. Coordinate with maintenance, supervision and/or engineers in the set-up and calibration of equipment. Perform troubleshooting of mechanical assemblies, company manufactured tooling and pressure testing. Use and operate various computer systems and applicable software (such as retrieving work instructions or manufacturing module in ERP system). Read and interpret product drawings, process specifications, and department procedures. Provide assistance in developing methods and procedures to control or modify the manufacturing process, collect data, or assist in research work. Repair or make recommendations to solve equipment issues. Apply general rules to specific problems to come up with logical answers. Perform mathematical calculations accurately and quickly. Establish and maintain cooperative working relationships with the work team and those contacted in the course of work Effectively communicate to supervision/lead person, maintenance, engineering or other employees of the organization. Work with management, supervision or lead personnel to prioritize work and meet critical deadlines. Provide rapid support while following proper housekeeping and safety procedures. Other duties as assigned. Qualifications: Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0-2 years of prior related experience. Preferred Additional Skills: Understanding of electrical test equipment (DMM, oscilloscope, etc.). Knowledge of strippers, crimpers and installing solder splices. Certification to IPC 620 preferred. Familiarity with 5S and lean procedures. Ability and willingness to work other shifts and overtime as necessary. Oracle and Delmia experience. Knowledge of Laminar Flow environments and FOE/FOD controls a plus. Knowledge of mechanical assembly and test of electromechanical components. In compliance with pay transparency requirements, the salary range for this role in Washington is $22.83/hr - $42.54/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris announced on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business. This position has been identified as one that will transition to the new standalone company upon closing of the transaction. Until that time, L3Harris will continue its hiring activity within this business. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
07/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician B Job Code: 36929 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Assembly will be on piece parts into completed sub-assembly using typical assembly tools, but could also include final assemblies, quality testing, re-work, etc. In our Redmond, WA, site (Seattle area), we fabricate, assemble, and test chemical and electric thrusters, as well as small scale propulsion systems. Our products enable a wide variety of missions from the exploration of our solar system to global communication and the surveillance of severe weather and wild fires. Essential Functions: Mechanical assembly and test of engines or other components/products as assigned. Small mechanical precision assembly. Handle precision clean parts within a laminar flow environment. Perform diversified, but semi-repetitive operations following standardized methods and procedures under changing conditions. Coordinate with maintenance, supervision and/or engineers in the set-up and calibration of equipment. Perform troubleshooting of mechanical assemblies, company manufactured tooling and pressure testing. Use and operate various computer systems and applicable software (such as retrieving work instructions or manufacturing module in ERP system). Read and interpret product drawings, process specifications, and department procedures. Provide assistance in developing methods and procedures to control or modify the manufacturing process, collect data, or assist in research work. Repair or make recommendations to solve equipment issues. Apply general rules to specific problems to come up with logical answers. Perform mathematical calculations accurately and quickly. Establish and maintain cooperative working relationships with the work team and those contacted in the course of work Effectively communicate to supervision/lead person, maintenance, engineering or other employees of the organization. Work with management, supervision or lead personnel to prioritize work and meet critical deadlines. Provide rapid support while following proper housekeeping and safety procedures. Other duties as assigned. Qualifications: Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0-2 years of prior related experience. Preferred Additional Skills: Understanding of electrical test equipment (DMM, oscilloscope, etc.). Knowledge of strippers, crimpers and installing solder splices. Certification to IPC 620 preferred. Familiarity with 5S and lean procedures. Ability and willingness to work other shifts and overtime as necessary. Oracle and Delmia experience. Knowledge of Laminar Flow environments and FOE/FOD controls a plus. Knowledge of mechanical assembly and test of electromechanical components. In compliance with pay transparency requirements, the salary range for this role in Washington is $22.83/hr - $42.54/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris announced on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business. This position has been identified as one that will transition to the new standalone company upon closing of the transaction. Until that time, L3Harris will continue its hiring activity within this business. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Job Description Join the frontlines to protect against some of the world's most powerful threats. As a Chemical Operations Specialist for the Army National Guard, you will support the country during natural disaster relief efforts and safeguard the nation from chemical and biological warfare. To perform these functions, you will be trained to expertly handle nuclear, biological, and chemical (NBC) detection and decontamination equipment so you can assist in the application of NBC defense measures. You will also be asked to maintain disaster plans, operate and perform maintenance on smoke generating equipment, and coordinate with civilian personnel on what to do in an emergency. Job Duties • Provide training advice and supervision regarding CBRN equipment and operations Some of the Skills You'll Learn • Operation of CBRN decontamination, defense, detection, and monitoring equipment • Wear and use of protective equipment • Hazardous Material Certification (at the awareness level) • Exposure to toxic agents while wearing CBRN protective equipment Helpful Skills • Ability to communicate effectively • Interest in algebra, chemistry, physics, geometry, and trigonometry • Ability to plan and organize • Ability to work calmly under tremendous stress Through your training, you will develop the skills and experience to enjoy a civilian career in chemistry, chemical engineering, and chemical disposal. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. After 10 weeks of Basic Training, where you will learn fundamental Soldiering skills, you will attend 11 weeks of Advanced Individual Training (AIT), which will include a combination of hands-on and classroom training where you will learn defensive procedures for NBC warfare and preparation of emergency plans. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 984 ZIP Code: 20003 Job Category: Police and Protection Age Requirements: Must be between the ages of 17 and 35 hazardous materials material tech technician hazmat waste handler
07/27/2026
Full time
Job Description Join the frontlines to protect against some of the world's most powerful threats. As a Chemical Operations Specialist for the Army National Guard, you will support the country during natural disaster relief efforts and safeguard the nation from chemical and biological warfare. To perform these functions, you will be trained to expertly handle nuclear, biological, and chemical (NBC) detection and decontamination equipment so you can assist in the application of NBC defense measures. You will also be asked to maintain disaster plans, operate and perform maintenance on smoke generating equipment, and coordinate with civilian personnel on what to do in an emergency. Job Duties • Provide training advice and supervision regarding CBRN equipment and operations Some of the Skills You'll Learn • Operation of CBRN decontamination, defense, detection, and monitoring equipment • Wear and use of protective equipment • Hazardous Material Certification (at the awareness level) • Exposure to toxic agents while wearing CBRN protective equipment Helpful Skills • Ability to communicate effectively • Interest in algebra, chemistry, physics, geometry, and trigonometry • Ability to plan and organize • Ability to work calmly under tremendous stress Through your training, you will develop the skills and experience to enjoy a civilian career in chemistry, chemical engineering, and chemical disposal. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. After 10 weeks of Basic Training, where you will learn fundamental Soldiering skills, you will attend 11 weeks of Advanced Individual Training (AIT), which will include a combination of hands-on and classroom training where you will learn defensive procedures for NBC warfare and preparation of emergency plans. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 984 ZIP Code: 20003 Job Category: Police and Protection Age Requirements: Must be between the ages of 17 and 35 hazardous materials material tech technician hazmat waste handler
Job Description Highly-mobile missile launchers give the Army National Guard a powerful edge on the battlefield. As the Land Combat Electronic Missile System Repairer, it's your responsibility to keep these launchers in top fighting shape by testing and repairing missile electronic assemblies and tracking systems. In this role, you will work primarily on the TOW antimissile system, the DRAGON antitank guided missile systems, and the Bradley Fighting Vehicle systems. Other duties include testing instruments and navigational controls, reading technical diagrams and manuals to locate and repair instrument parts, and replacing equipment parts. You will also perform quality control, inspect and maintain units, and repair unserviceable items. As your skills increase, so will your responsibilities. Advanced Land Combat Electronic Missile System Repairers take on more challenging projects, including training and supervising other Soldiers, providing technical assistance, installing equipment modifications, and performing quality control measures. Job Duties • Determine shortcomings and malfunctions in electronic, electrical, mechanical, and circuit elements • Repair unserviceable optical and infrared components • Inspect, test, and adjust components to specific tolerances • Perform quality control measures Some of the Skills You'll Learn • Principles of electronics • Use and maintenance of electrical and electronic test equipment • Equipment repair Helpful Skills • Strong attention to detail Through your training, you will develop the skills and experience to enjoy a civilian career in manufacturing, medical research, satellite communications, or in the commercial airline industry. You may also consider a career with the federal government. Through extensive Army National Guard training, experience, and some additional study, you may be eligible for Electronics Technician Association (ETA) certification. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. After 10 weeks of Basic Training, where you will learn fundamental Soldiering skills, you will attend approximately 22 weeks of classroom instruction, including practice in repairing and replacing equipment parts. You will learn the principles of electronics, how to use and maintain electrical and electronic test equipment, and equipment repair. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 47 ZIP Code: 35016 Job Category: Mechanic and Maintenance Age Requirements: Must be between the ages of 17 and 35 Electrical electronics installers repairers commercial and industrial equipment electric motor power tool powerhouse substation relay equipment
07/27/2026
Full time
Job Description Highly-mobile missile launchers give the Army National Guard a powerful edge on the battlefield. As the Land Combat Electronic Missile System Repairer, it's your responsibility to keep these launchers in top fighting shape by testing and repairing missile electronic assemblies and tracking systems. In this role, you will work primarily on the TOW antimissile system, the DRAGON antitank guided missile systems, and the Bradley Fighting Vehicle systems. Other duties include testing instruments and navigational controls, reading technical diagrams and manuals to locate and repair instrument parts, and replacing equipment parts. You will also perform quality control, inspect and maintain units, and repair unserviceable items. As your skills increase, so will your responsibilities. Advanced Land Combat Electronic Missile System Repairers take on more challenging projects, including training and supervising other Soldiers, providing technical assistance, installing equipment modifications, and performing quality control measures. Job Duties • Determine shortcomings and malfunctions in electronic, electrical, mechanical, and circuit elements • Repair unserviceable optical and infrared components • Inspect, test, and adjust components to specific tolerances • Perform quality control measures Some of the Skills You'll Learn • Principles of electronics • Use and maintenance of electrical and electronic test equipment • Equipment repair Helpful Skills • Strong attention to detail Through your training, you will develop the skills and experience to enjoy a civilian career in manufacturing, medical research, satellite communications, or in the commercial airline industry. You may also consider a career with the federal government. Through extensive Army National Guard training, experience, and some additional study, you may be eligible for Electronics Technician Association (ETA) certification. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. After 10 weeks of Basic Training, where you will learn fundamental Soldiering skills, you will attend approximately 22 weeks of classroom instruction, including practice in repairing and replacing equipment parts. You will learn the principles of electronics, how to use and maintain electrical and electronic test equipment, and equipment repair. Benefits/Requirements Benefits Paid training A monthly paycheck Montgomery GI Bill Federal and State tuition assistance Retirement benefits for part-time service Low-cost life insurance (up to $400,000 in coverage) 401(k)-type savings plan Student Loan Repayment Program (up to $50,000, for existing loans) Health care benefits available VA home loans Bonuses, if applicable Most non-prior service candidates will earn between $200 and $250 per drill weekend, subject to change Requirements Military enlistment in the Army National Guard Must be at least a junior in high school, or have a high school diploma or a GED certificate Must be between the ages of 17 and 35 Must be able to pass a physical exam and meet legal and moral standards Must meet citizenship requirements (see for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Other Job Information Job ID: 47 ZIP Code: 35016 Job Category: Mechanic and Maintenance Age Requirements: Must be between the ages of 17 and 35 Electrical electronics installers repairers commercial and industrial equipment electric motor power tool powerhouse substation relay equipment
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician C Job Code: 33936 Job Location: Redmond, WA Job Schedule: 2nd Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 3:30pm - 2am) Training will start on day shift prior to being assigned to second shift for approximately 2-3 months. This position includes 10% shift differential pay. Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Assembly will be on piece parts into completed sub-assembly using typical assembly tools, but could also include final assemblies, quality testing, re-work, etc. In our Redmond, WA, site (Seattle area), we fabricate, assemble, and test chemical and electric thrusters, as well as small scale propulsion systems. Our products enable a wide variety of missions from the exploration of our solar system to global communication and the surveillance of severe weather and wild fires. Essential Functions: Mechanical assembly and test of engines or other components/products as assigned. Small mechanical precision assembly. Handle precision clean parts within a laminar flow environment. Perform diversified, but semi-repetitive operations following standardized methods and procedures under changing conditions. Coordinate with maintenance, supervision and/or engineers in the set-up and calibration of equipment. Perform troubleshooting of mechanical assemblies, company manufactured tooling and pressure testing. Use and operate various computer systems and applicable software (such as retrieving work instructions or manufacturing module in ERP system). Read and interpret product drawings, process specifications, and department procedures. Provide assistance in developing methods and procedures to control or modify the manufacturing process, collect data, or assist in research work. Repair or make recommendations to solve equipment issues. Apply general rules to specific problems to come up with logical answers. Perform mathematical calculations accurately and quickly. Establish and maintain cooperative working relationships with the work team and those contacted in the course of work Effectively communicate to supervision/lead person, maintenance, engineering or other employees of the organization. Work with management, supervision or lead personnel to prioritize work and meet critical deadlines. Provide rapid support while following proper housekeeping and safety procedures. Other duties as assigned; additional duties could include production of parts, metal fabrication, etc. Qualifications: Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience. Preferred Additional Skills: Understanding of electrical test equipment (DMM, oscilloscope, etc.). Knowledge of strippers, crimpers and installing solder splices. Certification to IPC 620 preferred. Familiarity with 5S and lean procedures. Ability and willingness to work other shifts and overtime as necessary. Oracle and Delmia experience. Knowledge of Laminar Flow environments and FOE/FOD controls a plus. Knowledge of mechanical assembly and test of electromechanical components. In compliance with pay transparency requirements, the salary range for this role in Washington is $27.40/hr - $49.04/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris announced on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business. This position has been identified as one that will transition to the new standalone company upon closing of the transaction. Until that time, L3Harris will continue its hiring activity within this business. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
07/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Manufacturing Technician C Job Code: 33936 Job Location: Redmond, WA Job Schedule: 2nd Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 3:30pm - 2am) Training will start on day shift prior to being assigned to second shift for approximately 2-3 months. This position includes 10% shift differential pay. Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Assembly will be on piece parts into completed sub-assembly using typical assembly tools, but could also include final assemblies, quality testing, re-work, etc. In our Redmond, WA, site (Seattle area), we fabricate, assemble, and test chemical and electric thrusters, as well as small scale propulsion systems. Our products enable a wide variety of missions from the exploration of our solar system to global communication and the surveillance of severe weather and wild fires. Essential Functions: Mechanical assembly and test of engines or other components/products as assigned. Small mechanical precision assembly. Handle precision clean parts within a laminar flow environment. Perform diversified, but semi-repetitive operations following standardized methods and procedures under changing conditions. Coordinate with maintenance, supervision and/or engineers in the set-up and calibration of equipment. Perform troubleshooting of mechanical assemblies, company manufactured tooling and pressure testing. Use and operate various computer systems and applicable software (such as retrieving work instructions or manufacturing module in ERP system). Read and interpret product drawings, process specifications, and department procedures. Provide assistance in developing methods and procedures to control or modify the manufacturing process, collect data, or assist in research work. Repair or make recommendations to solve equipment issues. Apply general rules to specific problems to come up with logical answers. Perform mathematical calculations accurately and quickly. Establish and maintain cooperative working relationships with the work team and those contacted in the course of work Effectively communicate to supervision/lead person, maintenance, engineering or other employees of the organization. Work with management, supervision or lead personnel to prioritize work and meet critical deadlines. Provide rapid support while following proper housekeeping and safety procedures. Other duties as assigned; additional duties could include production of parts, metal fabrication, etc. Qualifications: Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience. Preferred Additional Skills: Understanding of electrical test equipment (DMM, oscilloscope, etc.). Knowledge of strippers, crimpers and installing solder splices. Certification to IPC 620 preferred. Familiarity with 5S and lean procedures. Ability and willingness to work other shifts and overtime as necessary. Oracle and Delmia experience. Knowledge of Laminar Flow environments and FOE/FOD controls a plus. Knowledge of mechanical assembly and test of electromechanical components. In compliance with pay transparency requirements, the salary range for this role in Washington is $27.40/hr - $49.04/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris announced on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business. This position has been identified as one that will transition to the new standalone company upon closing of the transaction. Until that time, L3Harris will continue its hiring activity within this business. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
SIGN ON BONUS : UPTO $7,000 Pay Rate: $32.00 - $40.00 per hour, Overtime available . Shift Available: 10:00 AM - 6:00 PM . Annual Tool Allowance: Yes, a $700 annual tool allowance is provided. Additional Benefits: Uniforms are provided, Full benefits, Free boots voucher yearly. Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
07/27/2026
Full time
SIGN ON BONUS : UPTO $7,000 Pay Rate: $32.00 - $40.00 per hour, Overtime available . Shift Available: 10:00 AM - 6:00 PM . Annual Tool Allowance: Yes, a $700 annual tool allowance is provided. Additional Benefits: Uniforms are provided, Full benefits, Free boots voucher yearly. Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY This is an Operations position responsible for assisting in and overseeing the safe operation, daily monitoring, and maintenance activities associated with general maintenance and repair of the facility, automatic retrieval systems, dock equipment, minor repair of electrical devices, plumbing, fleet shop, and security. RESPONSIBILITIES Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements. Knowledge of controls and electric (high and low voltage) with working knowledge of OSHA general industry electrical safety standards; Title 29. Working knowledge of NFPA 70 National electrical code and NFPA 70E electrical safety requirements. Understanding of electrical meter testing. Working knowledge of OSHA electrical Arc Flash requirements. Understanding and working knowledge of PLCs (programming logic controller) and PLC troubleshooting. Complete small welding projects as needed. Completes all special projects associated with buildings or grounds, as requested including but not limited to moving furniture or fixtures, changing lights. Completing basic maintenance and repair needs to ensure the timely completion of all maintenance needs. Perform general building maintenance which includes but not limited to light carpentry & painting, light plumbing, changing of light bulbs, repair of minor electrical devices. Maintain facility assets through scheduled preventative maintenance and repair activities which include but not limited to roof inspections and repairs. Concrete and asphalt paving inspections and repairs. Concrete industrial wear-slab inspections and repairs including joint cleaning, routing, and filling. Product racking inspections and repairs. Automatic Storage and Retrieval System (ASRS) inspections and repairs. Dock equipment (IE: Mechanical, electrical, hydraulic pit or vertical dock levelers; manual or electric dock doors; manual, electric, or hydraulic truck restraints; dock seals or shelters), inspections and repairs. Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc. Responsible for daily refrigeration operator duties including ePSM inspections and logs. Participate in departmental on-call program, as designated. Maintain all tools and equipment in a clean, safe, working order. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Champion overall safety in the department. Comply with OSHA and other local, state and federal regulations. Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance. Interact effectively, build relationships, and demonstrate a high level of cooperation. QUALIFICATIONS Education High School diploma or general education degree (GED); Facility maintenance tech school (preferred) Experience Four years of industrial facility and ASRS maintenance experience; or equivalent combination of education and related experience Refrigeration Operator I/RETA CARO (preferred) Professional Skills Ability to read, analyze and interpret technical procedures, or governmental regulations. Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, and Registrations Must possess a valid state Driver s License and provide proof of liability coverage meeting Company standards. Complete a Sysco approved defensive driving program. Obtain a Powered Industrial Equipment Certification from Sysco within 3 months. Electrical Arc Flash training (preferred) Trade electrical I & II training (preferred) Refrigeration Operator I RETA CARO (preferred) Physical Demands While performing the duties of this job, the associate is regularly required to talk or hear. The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance. The associate is occasionally required to stoop, kneel, crouch, or crawl. The associate must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Description: The Philadelphia, MS lumber manufacturing facility is looking for a skilled mechanical maintenance technician/millwright with a thorough and comprehensive knowledge of mechanical equipment, processes and techniques to repair, modify, install and maintain the facility's high-tech lumber manufacturing equipment. Associates in the position have the potential to progress to a pay rate of $37.00 per hour. Company paid relocation is not available for this position. The Philadelphia operation is a random length sawmill primarily producing lumber up to 20 feet in length with some specialty related capacity. Philadelphia, MS is located in east central Mississippi and filled with natural beauty and small-town charm. Whether you enjoy unique county fairs, resort entertainment, outdoor recreational activities, professional rodeos, golfing, historic landmarks or shopping, Neshoba County and Philadelphia, MS offer the best in recreation, relaxation, and entertainment. Key Functions: Machinery lubrications and other preventative maintenance assignments Repairing and troubleshooting mechanical power transmissions Bearing installment, coupling, belts, sprockets and chain driven installations Repair and troubleshooting of pneumatic and hydraulic systems Welding and metal fabrication Basic principles of cylinder repair Some troubleshooting and exposure to industrial electricity issues Reading blueprint and sketches proficiently to fabricate equipment and make modifications Qualifications: Able to work safely and follow all company safety policies and procedures Must be at least age 18 High school diploma/GED is required Must have at least 2 years' industrial mechanical maintenance/millwright experience OR equivalent combination of related education and/or maintenance/millwright experience Must personally complete the application process Successful completion of assessment process, background check and post-offer pre-employment drug screen and physical Able to work any shift, weekends, overtime, holidays as needed Able to work in extreme temperatures, in dusty and noisy conditions, while wearing safety equipment Must have demonstrated leadership and team skills Ability to write legibly and communicate as necessary to accomplish tasks Able to complete mobile equipment training Able to lift 2-20 pounds regularly, lift up to 50 pounds occasionally, climb steps and ladders, work from height, and stand or walk for 2-3 hours at a time for 10 hours are required in order to perform the essential job functions. Must have basic computer skills Resume detailing your education and work history required The following qualifications are preferred: Hydraulic troubleshooting skills Industrial maintenance degree About Wood Products We've been delivering quality building products and solutions to our customers for more than 100 years. From builders and dealers to specifiers and homeowners, we offer exceptional product performance and unparalleled support. For more than a century, we've been building our reputation as a leader in sustainable wood products. About Weyerhaeuser We sustainably manage forests and manufacture products that make the world a better place. We're serious about safety, driven to achieve excellence, and proud of what we do. With multiple business lines in locations across North America, we offer a range of exciting career opportunities for smart, talented people who are passionate about making a difference. We know you have a choice in your career. We want you to choose us. Weyerhaeuser uses automated software systems, including artificial intelligence, to assist with the screening, assessment, and/or selection of applicants. Weyerhaeuser is an equal opportunity employer. Inclusion is one of our five core values and we strive to maintain a culture where all our people feel a sense of belonging, opportunity and shared purpose. We are committed to recruiting a diverse workforce and supporting an equitable and inclusive environment that inspires people of all backgrounds to join, stay and thrive with our team.
07/27/2026
Full time
Description: The Philadelphia, MS lumber manufacturing facility is looking for a skilled mechanical maintenance technician/millwright with a thorough and comprehensive knowledge of mechanical equipment, processes and techniques to repair, modify, install and maintain the facility's high-tech lumber manufacturing equipment. Associates in the position have the potential to progress to a pay rate of $37.00 per hour. Company paid relocation is not available for this position. The Philadelphia operation is a random length sawmill primarily producing lumber up to 20 feet in length with some specialty related capacity. Philadelphia, MS is located in east central Mississippi and filled with natural beauty and small-town charm. Whether you enjoy unique county fairs, resort entertainment, outdoor recreational activities, professional rodeos, golfing, historic landmarks or shopping, Neshoba County and Philadelphia, MS offer the best in recreation, relaxation, and entertainment. Key Functions: Machinery lubrications and other preventative maintenance assignments Repairing and troubleshooting mechanical power transmissions Bearing installment, coupling, belts, sprockets and chain driven installations Repair and troubleshooting of pneumatic and hydraulic systems Welding and metal fabrication Basic principles of cylinder repair Some troubleshooting and exposure to industrial electricity issues Reading blueprint and sketches proficiently to fabricate equipment and make modifications Qualifications: Able to work safely and follow all company safety policies and procedures Must be at least age 18 High school diploma/GED is required Must have at least 2 years' industrial mechanical maintenance/millwright experience OR equivalent combination of related education and/or maintenance/millwright experience Must personally complete the application process Successful completion of assessment process, background check and post-offer pre-employment drug screen and physical Able to work any shift, weekends, overtime, holidays as needed Able to work in extreme temperatures, in dusty and noisy conditions, while wearing safety equipment Must have demonstrated leadership and team skills Ability to write legibly and communicate as necessary to accomplish tasks Able to complete mobile equipment training Able to lift 2-20 pounds regularly, lift up to 50 pounds occasionally, climb steps and ladders, work from height, and stand or walk for 2-3 hours at a time for 10 hours are required in order to perform the essential job functions. Must have basic computer skills Resume detailing your education and work history required The following qualifications are preferred: Hydraulic troubleshooting skills Industrial maintenance degree About Wood Products We've been delivering quality building products and solutions to our customers for more than 100 years. From builders and dealers to specifiers and homeowners, we offer exceptional product performance and unparalleled support. For more than a century, we've been building our reputation as a leader in sustainable wood products. About Weyerhaeuser We sustainably manage forests and manufacture products that make the world a better place. We're serious about safety, driven to achieve excellence, and proud of what we do. With multiple business lines in locations across North America, we offer a range of exciting career opportunities for smart, talented people who are passionate about making a difference. We know you have a choice in your career. We want you to choose us. Weyerhaeuser uses automated software systems, including artificial intelligence, to assist with the screening, assessment, and/or selection of applicants. Weyerhaeuser is an equal opportunity employer. Inclusion is one of our five core values and we strive to maintain a culture where all our people feel a sense of belonging, opportunity and shared purpose. We are committed to recruiting a diverse workforce and supporting an equitable and inclusive environment that inspires people of all backgrounds to join, stay and thrive with our team.
Position Summary The Team Lead position is responsible for front-line leadership of a team engaged in the operation of high-speed manufacturing/packaging equipment. The Team Lead position includes all aspects of production/packaging and maintenance work including set-up, operation, inspecting, maintenance, cleaning, troubleshooting and repair of manufacturing/process equipment. The Team Lead position develops employees by providing feedback to the direct manager to assist in thorough effective personnel performance management and driving accountability for team performance metrics and projects. The ability to effectively lead quality initiatives is critical to the department's ability to improve manufacturing processes, increase product quality, improve departmental productivity/efficiency, and above all, reduce manufacturing costs/scrap. Contribute to building a positive work environment. Primary Duties Assist in maintaining an efficient and effective workforce. Maximize equipment and process capabilities. Maintaining the VITEK 2 card manufacturing operation so that it is GMP compliant and meets FDA and ISO requirements. Maximize productivity with a goal of operating the manufacturing equipment to meet and exceed the Operating Equipment Efficiency (OEE) goals determined by World Class Manufacturing standards to support business demands. Maintain proficiency to operate high speed manufacturing equipment efficiently and effectively using HMI/SCADA interfaces. Maintain signature authority to perform area clear, line clearance and first articles. Provide support and training to the production team for advanced troubleshooting of high speed automated equipment. Leverage statistical process software to maintain optimal process centering. Check equipment during production runs for proper performance and assures the group is maintaining standard speeds. Recommend changes in equipment that would benefit line performance. Assist in creation and implementation of training/development plans for new equipment and assigned teammates. Provide feedback on design and operation of equipment to optimize manufacturing. Assist in developing and revising manufacturing procedures and training programs for manufacturing employees. Ensure overall team training is maintained current for processes and procedures relevant to all manufacturing/packaging activities and coordinate cross-training among roles to create staffing flexibility and increased depth. Assist in assignment of daily activities i.e.; scheduling production activities, breaks, lunches & Daily shift tie-in meetings. Provide a level of mechanical, electrical and instrumentation understanding to assist Process Technicians and Maintenance personnel with routine problem solving. Ensure the production of high quality products that are made with multiplicity of materials and assembled on a high-speed multifaceted production line. Ensure Quality Assurance is communicated to the team for minimal deviations and error free performance. Review documentation to support manufacturing and maintenance history records to ensure adherence to FDA Regulations, GMP, ISO, Department Procedures and Manufacturing Directions. Ensure the most recent information related to manufacturing and maintenance is communicated and/or documented for compliance, history, and reliability. Contribute to team goal development, status tracking and communication by providing feedback to the direct manager for the PMP (Performance Management Program) process. Contribute to a positive team environment. Perform all work in compliance with company quality procedures and standards. Inspire and motivate manufacturing team to achieve top performance as a team. Inspire and promote self-growth and internal development within the team. Lead and promote continuous improvement through team and individual initiatives. Identify areas of deficiency and implement practices to improve employee safety and to reduce the cost incurred through excessive scrap, poor workflow/process design and others. Serve as a project team member to reduce scrapped lots/materials, increase product quality, decrease operational costs, and increase departmental efficiency/productivity. Serve as change agent by driving the required cultural transformation and the adoption of successful process improvement practices. Diagnoses barriers to project success and facilitates resolution. Provide assistance with the creation, review and revision of instructions and SOPs necessary for the Manufacture of VITEK 2 card products. Assist with Manufacturing investigations, CAPA actions and other process equipment related quality concerns. Utilize a variety of software systems to support daily work activities (i.e. MES, TrackWise, LiveLink/DocLink, SAP, Corhus, Compliance Wire etc.). Communicate information effectively and succinctly (facts, ideas, messages) and in an organized manner real-time. Perform other duties as assigned. Qualifications High School Diploma, GED or equivalent required 5+ Years FDA/GMP and Manufacturing Experience required Knowledge, Skills, and Abilities Consistently upholds and reflects the core ethical principles and values that bioMérieux promotes. Effective verbal communication skills Written Communications - including the ability to communicate technical data in written form Communicates instructions clearly and effectively Inspire and energize individuals to achieve their best performance Informing others by sharing clear, timely information to ensure alignment. Basic: demonstrates fundamental awareness and can perform routine tasks with guidance Supervisory Responsibilities Direct supervision of approximately 6-10 employees; no indirect supervision. Decisions with short-term impact require little-to-no supervisory review. Decisions with long-term impact require supervisory review/approval. Supplemental Data Oversee Manufacturing daily activities and/or performing the batch record review to ensure adherence to the appropriate departmental procedures and batch record release activities. Perform line clearance, area clear and documentation verifications. Ensure that all processes and procedures that are performed are documented in a timely manner in accordance with company and regulatory regulations. Ensure that Manufacturing batch records and other documentation are prepared, completed and stored at the highest standards according to company policies and procedures to support manufacturing, maintenance of device history records, logs/logbooks and training requirements consistent with cGMP, ISO, and all applicable regulatory policies/regulations. Working Conditions Ability to remain in stationary position, either sitting or standing, for prolonged periods Ability to ascend/descend stairs, ladders, ramps, and the like Ability to wear PPE correctly most of the day Ability to operate heavy machinery Ability to adjust or move objects up to 50 pounds in all directions The estimated salary range in the state of Missouri for this role is between $24.50-42.40/hr. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bioMérieux's bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate's experience and will be presented in writing at the time of the offer. In addition, bioMérieux offers a competitive Total Rewards package that may include: A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options Company-Provided Life and Accidental Death Insurance Short and Long-Term Disability Insurance Retirement Plan including a generous non-discretionary employer contribution and employer match. Adoption Assistance Wellness Programs Employee Assistance Program Commuter Benefits Various voluntary benefit offerings Discount programs Parental leaves PandoLogic. Category: ,
07/27/2026
Full time
Position Summary The Team Lead position is responsible for front-line leadership of a team engaged in the operation of high-speed manufacturing/packaging equipment. The Team Lead position includes all aspects of production/packaging and maintenance work including set-up, operation, inspecting, maintenance, cleaning, troubleshooting and repair of manufacturing/process equipment. The Team Lead position develops employees by providing feedback to the direct manager to assist in thorough effective personnel performance management and driving accountability for team performance metrics and projects. The ability to effectively lead quality initiatives is critical to the department's ability to improve manufacturing processes, increase product quality, improve departmental productivity/efficiency, and above all, reduce manufacturing costs/scrap. Contribute to building a positive work environment. Primary Duties Assist in maintaining an efficient and effective workforce. Maximize equipment and process capabilities. Maintaining the VITEK 2 card manufacturing operation so that it is GMP compliant and meets FDA and ISO requirements. Maximize productivity with a goal of operating the manufacturing equipment to meet and exceed the Operating Equipment Efficiency (OEE) goals determined by World Class Manufacturing standards to support business demands. Maintain proficiency to operate high speed manufacturing equipment efficiently and effectively using HMI/SCADA interfaces. Maintain signature authority to perform area clear, line clearance and first articles. Provide support and training to the production team for advanced troubleshooting of high speed automated equipment. Leverage statistical process software to maintain optimal process centering. Check equipment during production runs for proper performance and assures the group is maintaining standard speeds. Recommend changes in equipment that would benefit line performance. Assist in creation and implementation of training/development plans for new equipment and assigned teammates. Provide feedback on design and operation of equipment to optimize manufacturing. Assist in developing and revising manufacturing procedures and training programs for manufacturing employees. Ensure overall team training is maintained current for processes and procedures relevant to all manufacturing/packaging activities and coordinate cross-training among roles to create staffing flexibility and increased depth. Assist in assignment of daily activities i.e.; scheduling production activities, breaks, lunches & Daily shift tie-in meetings. Provide a level of mechanical, electrical and instrumentation understanding to assist Process Technicians and Maintenance personnel with routine problem solving. Ensure the production of high quality products that are made with multiplicity of materials and assembled on a high-speed multifaceted production line. Ensure Quality Assurance is communicated to the team for minimal deviations and error free performance. Review documentation to support manufacturing and maintenance history records to ensure adherence to FDA Regulations, GMP, ISO, Department Procedures and Manufacturing Directions. Ensure the most recent information related to manufacturing and maintenance is communicated and/or documented for compliance, history, and reliability. Contribute to team goal development, status tracking and communication by providing feedback to the direct manager for the PMP (Performance Management Program) process. Contribute to a positive team environment. Perform all work in compliance with company quality procedures and standards. Inspire and motivate manufacturing team to achieve top performance as a team. Inspire and promote self-growth and internal development within the team. Lead and promote continuous improvement through team and individual initiatives. Identify areas of deficiency and implement practices to improve employee safety and to reduce the cost incurred through excessive scrap, poor workflow/process design and others. Serve as a project team member to reduce scrapped lots/materials, increase product quality, decrease operational costs, and increase departmental efficiency/productivity. Serve as change agent by driving the required cultural transformation and the adoption of successful process improvement practices. Diagnoses barriers to project success and facilitates resolution. Provide assistance with the creation, review and revision of instructions and SOPs necessary for the Manufacture of VITEK 2 card products. Assist with Manufacturing investigations, CAPA actions and other process equipment related quality concerns. Utilize a variety of software systems to support daily work activities (i.e. MES, TrackWise, LiveLink/DocLink, SAP, Corhus, Compliance Wire etc.). Communicate information effectively and succinctly (facts, ideas, messages) and in an organized manner real-time. Perform other duties as assigned. Qualifications High School Diploma, GED or equivalent required 5+ Years FDA/GMP and Manufacturing Experience required Knowledge, Skills, and Abilities Consistently upholds and reflects the core ethical principles and values that bioMérieux promotes. Effective verbal communication skills Written Communications - including the ability to communicate technical data in written form Communicates instructions clearly and effectively Inspire and energize individuals to achieve their best performance Informing others by sharing clear, timely information to ensure alignment. Basic: demonstrates fundamental awareness and can perform routine tasks with guidance Supervisory Responsibilities Direct supervision of approximately 6-10 employees; no indirect supervision. Decisions with short-term impact require little-to-no supervisory review. Decisions with long-term impact require supervisory review/approval. Supplemental Data Oversee Manufacturing daily activities and/or performing the batch record review to ensure adherence to the appropriate departmental procedures and batch record release activities. Perform line clearance, area clear and documentation verifications. Ensure that all processes and procedures that are performed are documented in a timely manner in accordance with company and regulatory regulations. Ensure that Manufacturing batch records and other documentation are prepared, completed and stored at the highest standards according to company policies and procedures to support manufacturing, maintenance of device history records, logs/logbooks and training requirements consistent with cGMP, ISO, and all applicable regulatory policies/regulations. Working Conditions Ability to remain in stationary position, either sitting or standing, for prolonged periods Ability to ascend/descend stairs, ladders, ramps, and the like Ability to wear PPE correctly most of the day Ability to operate heavy machinery Ability to adjust or move objects up to 50 pounds in all directions The estimated salary range in the state of Missouri for this role is between $24.50-42.40/hr. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bioMérieux's bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate's experience and will be presented in writing at the time of the offer. In addition, bioMérieux offers a competitive Total Rewards package that may include: A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options Company-Provided Life and Accidental Death Insurance Short and Long-Term Disability Insurance Retirement Plan including a generous non-discretionary employer contribution and employer match. Adoption Assistance Wellness Programs Employee Assistance Program Commuter Benefits Various voluntary benefit offerings Discount programs Parental leaves PandoLogic. Category: ,
