22nd Century Technologies Inc. (TSCTI)
Crestview, Florida
Job Description Job Description Duration: 5+ Months Job Description: You will be an Aircraft Electrician I & II, you will be responsible for installing/modifying electrical harnesses/components, routing wire/cable assemblies, terminating wire/cable assemblies and testing wire/cable assemblies on C-130J aircraft As an Aircraft Electrician I & II, you will be required to: Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft to include Fiber Optic, 1553 Data Bus, RF Cables, Twinax Cables, Triax Cables, Quadrax Cables, Ethernet Cables. Remove and install aircraft components as required. Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification. Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. Frequently lift and/or push or pull up to 10 pounds and occasionally lift and/or push or pull up to 25 pounds. Perform repetitive movements and work overhead. Work in a safe and efficient manner while maintaining a clean, FOD-free work area. Properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. Basic Qualifications: Minimum two (2) years of aircraft electrical experience required in one of the following or equivalent fields, Communications/Navigations, Guidance Control, Electronic Warfare, Avionics, Electro/Environmental required. Minimum two (2) years demonstrated aircraft electrical experience completing wire/harness fabrication, routing, installation, and testing. Minimum four (4) years of avionics experience required in one of the following or equivalent fields, Communications/Navigations, Guidance Control, Electronic Warfare, Electro/Environmental required. Ability to read and interpret aircraft electrical drawings, diagrams, blueprints, and specifications. Minimum or equivalent of a USAF 5-Level (Journeyman) or equivalent. Ability to obtain and maintain a DoD secret security clearance and therefore all candidates must be a US Citizen. Desired skills: Avionics/Electrical systems wire routing and installation experience. Military/Commercial aircraft modification installation experience includes wire harness installation and check out procedures. Ability to interpret installation drawings, install and route electrical cable assemblies, perform multiple termination processes and perform continuity checks in accordance with standard processes. Ability to read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes Experience on C-130J aircraft. Active Secret Security Clearance preferred. Company Description About 22nd Century Technologies, Inc. (TSCTI) 22nd Century Technologies, Inc. (TSCTI) is one of the fastest-growing IT Services Integrators and Workforce Solutions providers in the United States. Since 1997, we have grown to a team of 6,000+ professionals, delivering innovative technology and workforce solutions across all 50 U.S. states, Canada, and Mexico. With headquarters in Princeton, NJ and McLean, VA, TSCTI specializes in Digital Transformation, Artificial Intelligence (AI), Cybersecurity, Cloud Computing, Enterprise IT, Workforce Solutions, and Healthcare Staffing. We proudly support Federal, State, Local, Education (SLED), Healthcare, and Commercial clients. As a leading healthcare staffing provider, we connect talented professionals with rewarding opportunities in hospitals, clinics, laboratories, VA Medical Centers, and healthcare organizations nationwide. Our commitment to excellence is backed by CMMI Level 3 and ISO 9001, ISO 20000, and ISO 27001 certifications. We support 14 Federal Executive Departments, 37 Federal agencies, all 50 State governments, 115+ local agencies, and 80+ Fortune 500 companies. TSCTI has been recognized among Forbes America's Best Large Employers, Forbes Best Employers for Veterans, Forbes Best Employers for Tech Workers, Newsweek's America's Greatest Workplaces for Diversity, and is a 13-time Inc. 5000 honoree. Learn more about us at: Equal Opportunity Employer 22nd Century Technologies, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive workplace for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other status protected by applicable law. Company Description About 22nd Century Technologies, Inc. (TSCTI) 22nd Century Technologies, Inc. (TSCTI) is one of the fastest-growing IT Services Integrators and Workforce Solutions providers in the United States. Since 1997, we have grown to a team of 6,000+ professionals, delivering innovative technology and workforce solutions across all 50 U.S. states, Canada, and Mexico. With headquarters in Princeton, NJ and McLean, VA, TSCTI specializes in Digital Transformation, Artificial Intelligence (AI), Cybersecurity, Cloud Computing, Enterprise IT, Workforce Solutions, and Healthcare Staffing. We proudly support Federal, State, Local, Education (SLED), Healthcare, and Commercial clients. As a leading healthcare staffing provider, we connect talented professionals with rewarding opportunities in hospitals, clinics, laboratories, VA Medical Centers, and healthcare organizations nationwide. Our commitment to excellence is backed by CMMI Level 3 and ISO 9001, ISO 20000, and ISO 27001 certifications. We support 14 Federal Executive Departments, 37 Federal agencies, all 50 State governments, 115+ local agencies, and 80+ Fortune 500 companies. TSCTI has been recognized among Forbes America's Best Large Employers, Forbes Best Employers for Veterans, Forbes Best Employers for Tech Workers, Newsweek's America's Greatest Workplaces for Diversity, and is a 13-time Inc. 5000 honoree. Learn more about us at: Equal Opportunity Employer 22nd Century Technologies, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive workplace for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other status protected by applicable law.
07/24/2026
Full time
Job Description Job Description Duration: 5+ Months Job Description: You will be an Aircraft Electrician I & II, you will be responsible for installing/modifying electrical harnesses/components, routing wire/cable assemblies, terminating wire/cable assemblies and testing wire/cable assemblies on C-130J aircraft As an Aircraft Electrician I & II, you will be required to: Install, route, terminate, and test electrical cables and harnesses on C-130J aircraft to include Fiber Optic, 1553 Data Bus, RF Cables, Twinax Cables, Triax Cables, Quadrax Cables, Ethernet Cables. Remove and install aircraft components as required. Interpret engineering drawings and blueprints such as electrical wiring diagrams, routing drawings, and harness assembly drawings. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of install/modification. Use and apply hand tools, power tools, work stands, support equipment, and special tools/calibrated test equipment. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals. Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. Frequently lift and/or push or pull up to 10 pounds and occasionally lift and/or push or pull up to 25 pounds. Perform repetitive movements and work overhead. Work in a safe and efficient manner while maintaining a clean, FOD-free work area. Properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. Basic Qualifications: Minimum two (2) years of aircraft electrical experience required in one of the following or equivalent fields, Communications/Navigations, Guidance Control, Electronic Warfare, Avionics, Electro/Environmental required. Minimum two (2) years demonstrated aircraft electrical experience completing wire/harness fabrication, routing, installation, and testing. Minimum four (4) years of avionics experience required in one of the following or equivalent fields, Communications/Navigations, Guidance Control, Electronic Warfare, Electro/Environmental required. Ability to read and interpret aircraft electrical drawings, diagrams, blueprints, and specifications. Minimum or equivalent of a USAF 5-Level (Journeyman) or equivalent. Ability to obtain and maintain a DoD secret security clearance and therefore all candidates must be a US Citizen. Desired skills: Avionics/Electrical systems wire routing and installation experience. Military/Commercial aircraft modification installation experience includes wire harness installation and check out procedures. Ability to interpret installation drawings, install and route electrical cable assemblies, perform multiple termination processes and perform continuity checks in accordance with standard processes. Ability to read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes Experience on C-130J aircraft. Active Secret Security Clearance preferred. Company Description About 22nd Century Technologies, Inc. (TSCTI) 22nd Century Technologies, Inc. (TSCTI) is one of the fastest-growing IT Services Integrators and Workforce Solutions providers in the United States. Since 1997, we have grown to a team of 6,000+ professionals, delivering innovative technology and workforce solutions across all 50 U.S. states, Canada, and Mexico. With headquarters in Princeton, NJ and McLean, VA, TSCTI specializes in Digital Transformation, Artificial Intelligence (AI), Cybersecurity, Cloud Computing, Enterprise IT, Workforce Solutions, and Healthcare Staffing. We proudly support Federal, State, Local, Education (SLED), Healthcare, and Commercial clients. As a leading healthcare staffing provider, we connect talented professionals with rewarding opportunities in hospitals, clinics, laboratories, VA Medical Centers, and healthcare organizations nationwide. Our commitment to excellence is backed by CMMI Level 3 and ISO 9001, ISO 20000, and ISO 27001 certifications. We support 14 Federal Executive Departments, 37 Federal agencies, all 50 State governments, 115+ local agencies, and 80+ Fortune 500 companies. TSCTI has been recognized among Forbes America's Best Large Employers, Forbes Best Employers for Veterans, Forbes Best Employers for Tech Workers, Newsweek's America's Greatest Workplaces for Diversity, and is a 13-time Inc. 5000 honoree. Learn more about us at: Equal Opportunity Employer 22nd Century Technologies, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive workplace for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other status protected by applicable law. Company Description About 22nd Century Technologies, Inc. (TSCTI) 22nd Century Technologies, Inc. (TSCTI) is one of the fastest-growing IT Services Integrators and Workforce Solutions providers in the United States. Since 1997, we have grown to a team of 6,000+ professionals, delivering innovative technology and workforce solutions across all 50 U.S. states, Canada, and Mexico. With headquarters in Princeton, NJ and McLean, VA, TSCTI specializes in Digital Transformation, Artificial Intelligence (AI), Cybersecurity, Cloud Computing, Enterprise IT, Workforce Solutions, and Healthcare Staffing. We proudly support Federal, State, Local, Education (SLED), Healthcare, and Commercial clients. As a leading healthcare staffing provider, we connect talented professionals with rewarding opportunities in hospitals, clinics, laboratories, VA Medical Centers, and healthcare organizations nationwide. Our commitment to excellence is backed by CMMI Level 3 and ISO 9001, ISO 20000, and ISO 27001 certifications. We support 14 Federal Executive Departments, 37 Federal agencies, all 50 State governments, 115+ local agencies, and 80+ Fortune 500 companies. TSCTI has been recognized among Forbes America's Best Large Employers, Forbes Best Employers for Veterans, Forbes Best Employers for Tech Workers, Newsweek's America's Greatest Workplaces for Diversity, and is a 13-time Inc. 5000 honoree. Learn more about us at: Equal Opportunity Employer 22nd Century Technologies, Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive workplace for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other status protected by applicable law.
Metaforá Consulting, Inc.
Colonial Heights, Virginia
Job Description Job Description Traffic Operations Center Computer Operator Job Description Metaforá Consulting, Inc. is seeking an entry-level, full-time Control Room Traffic Monitoring Operator ( TOC Operator ) for the Colonial Heights area, with an anticipated start date of September 2026. This position is based onsite within the client's Traffic Operations Center and involves operating a workstation during an 8-hour shift using multiple software applications that support traffic operations. Training will be provided. The TOC Operator will report directly to the TOC Shift Supervisor and Project Management Team and will maintain regular communication with floor staff throughout each shift. This is a non-exempt position, with overtime compensated at time-and-a-half in accordance with applicable laws. The starting pay rate is $19.00 per hour (non-negotiable). Paid on-the-job training will be provided at the starting rate of $19.00 per hour. Upon successful certification as a TOC Operator, the hourly rate will increase to $20.00 per hour. The responsibilities of this position include, but are not limited to: Utilization of various Intelligent Transportation Systems (ITS) equipment, such as Closed-Circuit Television (CCTV), Dynamic Message Signs (DMS), and Highway Advisory Radio (HAR) systems Real-time assessment of all incoming traffic data and prioritization of content and traffic reporting needs Dispatch of maintenance and SSP personnel Multi-agency and public communications via various channels Verification and monitoring of unplanned incidents, construction, special events and any other issue impacting traffic flow and/or motorist safety Completion of operational checklists as applicable Review and posting traveler information via DMS and/or media outlets Adherence to training protocols and obtain and maintain up to date certifications as per policy Provide real-time status of on-going control room activities Maintain work orders for ITS equipment and log status updates Attend training and staffing meetings as requested Other ad-hoc initiatives as assigned by the Project Management Team Works under direct supervision performing routine and repetitive duties Monitor the roadways, including detecting, confirming, updating, and responding to scheduled and unscheduled traffic events and congestion with ITS devices Act like an emergency dispatcher within a call center environment dispatching Safety Service Patrol via a two-way radio system to assist motorists, respond to events and other activities that require timely and efficient responses Other duties as assigned Qualifications MINIMUM REQUIREMENTS : High School Diploma or GED equivalent Be a minimum of 18 years of age Good interpersonal skills Proficient at typing Strong, accurate data entry skills and grammar Ability to communicate clearly both in writing and verbally Ability to adhere to a strict attendance and on-time policy Basic skill proficiency in the use of Windows based applications including Outlook, Internet Explorer, Word, and Excel Ability to work in a team environment under stressful conditions Must be able to work in a Control Room work environment Ability to perform effectively in a fast-paced environment requiring high level of multi-tasking Ability to synthesize information from multiple, diverse, and simultaneous inputs Ability to work calmly and accurately under intense pressure Ability to work alternate work schedules and on-call duties at a 24/7/365 operation center; Schedules are dictated by need of operation and stated in advance. Schedules may vary. Must pass a State and Federal criminal history/security background check; must also successfully complete Virginia Department of Transportation fingerprint -based criminal History Records Check (CHRC) Must pass a pre-employment drug screen and successfully participate in the program's mandatory random drug screening process Must be able to remain in a stationary position for long periods of time monitoring Intelligent Transportation Systems such CCTV camera displays, meters, law enforcement radio broadcasts, answering/responding to calls and communicating to other staff or partner agencies Constantly operate a computer and other monitoring and communication equipment PREFERRED QUALIFICATIONS : Knowledge of two-way communication systems; radio and telecommunications experience Geographic familiarity with regional freeway systems and arterial roads TOC operator certifications for levels 1 and 2 preferred Knowledge of incident management response techniques and municipality and area traffic management organizations Emergency Operations Center knowledge and/or experience Additional Information: This job includes on-the-job training developed to certify staff for the TOC Operator role. At the end of training, you will take a certification exam. Every TOC Operator is required to pass a certification exam initially and every twelve months with a minimum score of 90% and approval from their team Regional Manager. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Relocation Benefits are not available for this position. All your information will be kept confidential according to EEO guidelines. With infrastructure investment accelerating worldwide, our services are in great demand, and there's never been a better time to be in the transportation field! Metaforá provides a benefits program to meet the diverse needs of our employees and their families. Metaforá provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Company Description Metaforá means Transportation. Metaforá Consulting, Inc. is a professional transportation engineering and ITS consulting firm. Metaforá is committed to growth and innovation in ITS, traffic engineering, and consulting. We strive to collaborate on projects in these fields by providing an efficient, high-value, communicative, and integrated approach. Company Description Metaforá means Transportation. Metaforá Consulting, Inc. is a professional transportation engineering and ITS consulting firm. Metaforá is committed to growth and innovation in ITS, traffic engineering, and consulting. We strive to collaborate on projects in these fields by providing an efficient, high-value, communicative, and integrated approach.
07/24/2026
Full time
Job Description Job Description Traffic Operations Center Computer Operator Job Description Metaforá Consulting, Inc. is seeking an entry-level, full-time Control Room Traffic Monitoring Operator ( TOC Operator ) for the Colonial Heights area, with an anticipated start date of September 2026. This position is based onsite within the client's Traffic Operations Center and involves operating a workstation during an 8-hour shift using multiple software applications that support traffic operations. Training will be provided. The TOC Operator will report directly to the TOC Shift Supervisor and Project Management Team and will maintain regular communication with floor staff throughout each shift. This is a non-exempt position, with overtime compensated at time-and-a-half in accordance with applicable laws. The starting pay rate is $19.00 per hour (non-negotiable). Paid on-the-job training will be provided at the starting rate of $19.00 per hour. Upon successful certification as a TOC Operator, the hourly rate will increase to $20.00 per hour. The responsibilities of this position include, but are not limited to: Utilization of various Intelligent Transportation Systems (ITS) equipment, such as Closed-Circuit Television (CCTV), Dynamic Message Signs (DMS), and Highway Advisory Radio (HAR) systems Real-time assessment of all incoming traffic data and prioritization of content and traffic reporting needs Dispatch of maintenance and SSP personnel Multi-agency and public communications via various channels Verification and monitoring of unplanned incidents, construction, special events and any other issue impacting traffic flow and/or motorist safety Completion of operational checklists as applicable Review and posting traveler information via DMS and/or media outlets Adherence to training protocols and obtain and maintain up to date certifications as per policy Provide real-time status of on-going control room activities Maintain work orders for ITS equipment and log status updates Attend training and staffing meetings as requested Other ad-hoc initiatives as assigned by the Project Management Team Works under direct supervision performing routine and repetitive duties Monitor the roadways, including detecting, confirming, updating, and responding to scheduled and unscheduled traffic events and congestion with ITS devices Act like an emergency dispatcher within a call center environment dispatching Safety Service Patrol via a two-way radio system to assist motorists, respond to events and other activities that require timely and efficient responses Other duties as assigned Qualifications MINIMUM REQUIREMENTS : High School Diploma or GED equivalent Be a minimum of 18 years of age Good interpersonal skills Proficient at typing Strong, accurate data entry skills and grammar Ability to communicate clearly both in writing and verbally Ability to adhere to a strict attendance and on-time policy Basic skill proficiency in the use of Windows based applications including Outlook, Internet Explorer, Word, and Excel Ability to work in a team environment under stressful conditions Must be able to work in a Control Room work environment Ability to perform effectively in a fast-paced environment requiring high level of multi-tasking Ability to synthesize information from multiple, diverse, and simultaneous inputs Ability to work calmly and accurately under intense pressure Ability to work alternate work schedules and on-call duties at a 24/7/365 operation center; Schedules are dictated by need of operation and stated in advance. Schedules may vary. Must pass a State and Federal criminal history/security background check; must also successfully complete Virginia Department of Transportation fingerprint -based criminal History Records Check (CHRC) Must pass a pre-employment drug screen and successfully participate in the program's mandatory random drug screening process Must be able to remain in a stationary position for long periods of time monitoring Intelligent Transportation Systems such CCTV camera displays, meters, law enforcement radio broadcasts, answering/responding to calls and communicating to other staff or partner agencies Constantly operate a computer and other monitoring and communication equipment PREFERRED QUALIFICATIONS : Knowledge of two-way communication systems; radio and telecommunications experience Geographic familiarity with regional freeway systems and arterial roads TOC operator certifications for levels 1 and 2 preferred Knowledge of incident management response techniques and municipality and area traffic management organizations Emergency Operations Center knowledge and/or experience Additional Information: This job includes on-the-job training developed to certify staff for the TOC Operator role. At the end of training, you will take a certification exam. Every TOC Operator is required to pass a certification exam initially and every twelve months with a minimum score of 90% and approval from their team Regional Manager. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Relocation Benefits are not available for this position. All your information will be kept confidential according to EEO guidelines. With infrastructure investment accelerating worldwide, our services are in great demand, and there's never been a better time to be in the transportation field! Metaforá provides a benefits program to meet the diverse needs of our employees and their families. Metaforá provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Company Description Metaforá means Transportation. Metaforá Consulting, Inc. is a professional transportation engineering and ITS consulting firm. Metaforá is committed to growth and innovation in ITS, traffic engineering, and consulting. We strive to collaborate on projects in these fields by providing an efficient, high-value, communicative, and integrated approach. Company Description Metaforá means Transportation. Metaforá Consulting, Inc. is a professional transportation engineering and ITS consulting firm. Metaforá is committed to growth and innovation in ITS, traffic engineering, and consulting. We strive to collaborate on projects in these fields by providing an efficient, high-value, communicative, and integrated approach.
Job Description Job Description Electrical Project Manager Quality "Plus" Services Intel Semiconductor Project Position Summary Quality "Plus" Services is seeking an experienced and results-driven Electrical Project Manager to lead and oversee electrical construction activities on the Intel Semiconductor Project. The Electrical Project Manager will be responsible for planning, coordinating, executing, and delivering complex electrical scopes while maintaining the highest standards of safety, quality, productivity, and client satisfaction. This position requires strong leadership skills, extensive electrical construction experience, and the ability to manage multiple stakeholders in a fast-paced semiconductor manufacturing environment. Responsibilities Project Leadership & Execution Manage all phases of electrical construction projects from pre-construction through commissioning and turnover. Develop and maintain project schedules, budgets, manpower forecasts, and procurement plans. Coordinate field operations to ensure work is completed safely, efficiently, and in accordance with project milestones. Monitor project performance and implement corrective actions to maintain schedule and budget objectives. Lead project meetings with clients, subcontractors, vendors, and internal teams. Client & Stakeholder Management Serve as the primary point of contact for project stakeholders. Build and maintain strong working relationships with Intel representatives, general contractors, subcontractors, and vendors. Communicate project updates, risks, and mitigation strategies to senior management and clients. Ensure customer expectations are met or exceeded throughout the project lifecycle. Safety & Compliance Promote and enforce Quality "Plus" Services' commitment to a zero-incident safety culture. Ensure compliance with OSHA regulations, site-specific safety requirements, and Intel project standards. Participate in safety audits, inspections, and incident investigations. Lead by example in maintaining a safe and professional work environment. Financial Management Manage project budgets, cost controls, forecasting, and financial reporting. Review contracts, change orders, and project financial performance. Track labor productivity and implement strategies to improve project profitability. Negotiate and manage subcontractor agreements and vendor contracts. Quality Assurance Ensure all electrical installations meet project specifications, NEC requirements, and industry standards. Develop quality control processes and oversee inspections and testing activities. Coordinate commissioning and system turnover activities. Maintain project documentation and closeout records. Team Leadership Lead project engineers, superintendents, foremen, and field personnel. Assist with workforce planning, staffing, and resource allocation. Coach, mentor, and develop team members. Foster a culture of accountability, collaboration, and continuous improvement. Qualifications Required Bachelor's degree in Construction Management, Electrical Engineering, or a related field (equivalent experience may be considered). 7+ years of electrical construction project management experience. Proven experience managing large commercial, industrial, manufacturing, data center, or semiconductor projects. Strong knowledge of electrical systems, power distribution, controls, and instrumentation. Experience with Primavera P6, Microsoft Project, or similar scheduling software. Proficiency with Microsoft Office Suite and construction management software. Strong financial management and budgeting skills. Excellent communication, leadership, and organizational abilities. Preferred Experience working on semiconductor, cleanroom, pharmaceutical, data center, or mission-critical facilities. OSHA 30 Certification. PMP Certification. Journeyman or Master Electrician License. Experience with BIM/VDC coordination processes. Knowledge of Lean Construction principles. Physical Requirements Ability to visit active construction sites and walk extended distances. Ability to climb ladders, access elevated work areas, and safely navigate construction environments. Ability to work in varying indoor and outdoor conditions. Occasional travel may be required. Why Join Quality "Plus" Services? At Quality "Plus" Services, we help support some of the nation's most complex and innovative construction projects. We are committed to safety, integrity, teamwork, and excellence while providing opportunities for professional growth and long-term career success. Join our team and help build the next generation of semiconductor manufacturing facilities that power the future of technology. Quality "Plus" Services is an Equal Opportunity Employer. Company Description QPS is a true multi-craft industrial contractor, providing the efficiency that comes from a single point of contact and allowing for tasks and projects to be carefully tracked and monitored and ensuring a timely and cost-effective completion that is measured in safety and quality of craftmanship. Company Description QPS is a true multi-craft industrial contractor, providing the efficiency that comes from a single point of contact and allowing for tasks and projects to be carefully tracked and monitored and ensuring a timely and cost-effective completion that is measured in safety and quality of craftmanship.
07/24/2026
Full time
Job Description Job Description Electrical Project Manager Quality "Plus" Services Intel Semiconductor Project Position Summary Quality "Plus" Services is seeking an experienced and results-driven Electrical Project Manager to lead and oversee electrical construction activities on the Intel Semiconductor Project. The Electrical Project Manager will be responsible for planning, coordinating, executing, and delivering complex electrical scopes while maintaining the highest standards of safety, quality, productivity, and client satisfaction. This position requires strong leadership skills, extensive electrical construction experience, and the ability to manage multiple stakeholders in a fast-paced semiconductor manufacturing environment. Responsibilities Project Leadership & Execution Manage all phases of electrical construction projects from pre-construction through commissioning and turnover. Develop and maintain project schedules, budgets, manpower forecasts, and procurement plans. Coordinate field operations to ensure work is completed safely, efficiently, and in accordance with project milestones. Monitor project performance and implement corrective actions to maintain schedule and budget objectives. Lead project meetings with clients, subcontractors, vendors, and internal teams. Client & Stakeholder Management Serve as the primary point of contact for project stakeholders. Build and maintain strong working relationships with Intel representatives, general contractors, subcontractors, and vendors. Communicate project updates, risks, and mitigation strategies to senior management and clients. Ensure customer expectations are met or exceeded throughout the project lifecycle. Safety & Compliance Promote and enforce Quality "Plus" Services' commitment to a zero-incident safety culture. Ensure compliance with OSHA regulations, site-specific safety requirements, and Intel project standards. Participate in safety audits, inspections, and incident investigations. Lead by example in maintaining a safe and professional work environment. Financial Management Manage project budgets, cost controls, forecasting, and financial reporting. Review contracts, change orders, and project financial performance. Track labor productivity and implement strategies to improve project profitability. Negotiate and manage subcontractor agreements and vendor contracts. Quality Assurance Ensure all electrical installations meet project specifications, NEC requirements, and industry standards. Develop quality control processes and oversee inspections and testing activities. Coordinate commissioning and system turnover activities. Maintain project documentation and closeout records. Team Leadership Lead project engineers, superintendents, foremen, and field personnel. Assist with workforce planning, staffing, and resource allocation. Coach, mentor, and develop team members. Foster a culture of accountability, collaboration, and continuous improvement. Qualifications Required Bachelor's degree in Construction Management, Electrical Engineering, or a related field (equivalent experience may be considered). 7+ years of electrical construction project management experience. Proven experience managing large commercial, industrial, manufacturing, data center, or semiconductor projects. Strong knowledge of electrical systems, power distribution, controls, and instrumentation. Experience with Primavera P6, Microsoft Project, or similar scheduling software. Proficiency with Microsoft Office Suite and construction management software. Strong financial management and budgeting skills. Excellent communication, leadership, and organizational abilities. Preferred Experience working on semiconductor, cleanroom, pharmaceutical, data center, or mission-critical facilities. OSHA 30 Certification. PMP Certification. Journeyman or Master Electrician License. Experience with BIM/VDC coordination processes. Knowledge of Lean Construction principles. Physical Requirements Ability to visit active construction sites and walk extended distances. Ability to climb ladders, access elevated work areas, and safely navigate construction environments. Ability to work in varying indoor and outdoor conditions. Occasional travel may be required. Why Join Quality "Plus" Services? At Quality "Plus" Services, we help support some of the nation's most complex and innovative construction projects. We are committed to safety, integrity, teamwork, and excellence while providing opportunities for professional growth and long-term career success. Join our team and help build the next generation of semiconductor manufacturing facilities that power the future of technology. Quality "Plus" Services is an Equal Opportunity Employer. Company Description QPS is a true multi-craft industrial contractor, providing the efficiency that comes from a single point of contact and allowing for tasks and projects to be carefully tracked and monitored and ensuring a timely and cost-effective completion that is measured in safety and quality of craftmanship. Company Description QPS is a true multi-craft industrial contractor, providing the efficiency that comes from a single point of contact and allowing for tasks and projects to be carefully tracked and monitored and ensuring a timely and cost-effective completion that is measured in safety and quality of craftmanship.
Avion Hospitality Employee Services LLC
Cranberry Twp, Pennsylvania
The Front Office Manager is responsible for ensuring the operation of the Front Office in an attentive friendly, efficient and courteous manner, providing all guests with quality service prior to and throughout their stay, while maximizing room revenue and occupancy. Respond to all guest requests, problems, complaints and/or accidents presented at the Front Desk or through Reservations, in an attentive, courteous and efficient manner. Follow up to ensure guest satisfaction. Motivate, coach, counsel and discipline all Front Desk personnel according to Avion Hospitality S.O.P.'s. Ensure compliance to brand and company training, using the steps to effective training according to Avion Hospitality standards. Develop employee morale and ensure training of Front Desk personnel. Maximize room revenue and occupancy by reviewing status daily. Analyze rate efficiency, monitor credit report and maintain close observation of daily house count. Supervise the Night Audit function and monitor the House Charge Worksheet and Flash Report for accuracy. Participate in required M.O.D. program as scheduled. Review Front Desk staff's worked hours for payroll compilation and submit to HR on a timely basis. Prepare employee Schedule according to business forecast, payroll budget guidelines and productivity requirements. Present with Wage Progress Report to AGM weekly. Ensure that no-show revenue is maximized through consistent and accurate billing. Maintain Avion Hospitality S.O.P.'s regarding Purchase Orders, vouchering of invoices and checkbook accounting. Ensure that Wage Progress, Productivity and the Ten-Day Forecast are completed on a timely basis according to Avion Hospitality S.O.P.'s. Maintain a professional working relationship and promote open lines of communication with managers, employees and other departments. Work closely with Accounting on follow-up items, i.e. rejected credit cards, employee discrepancies, etc. Operate all aspects of the Front Office computer system, including software maintenance, report generation and analysis, and simple programming. Monitor proper operation of the P.B.X. console and ensure that employees maintain Avion Hospitality S.O.P.'s in its use. Monitor the process of taking reservations ensuring that Avion Hospitality courtesy and up selling techniques are maintained. Greet and welcome all guests approaching the Front Desk in accordance with Avion Hospitality S.O.P.'s. Ensure implementation of all Avion Hospitality policies and house rules. Operate radios efficiently and professionally in communicating with hotel staff. Ensure the proper use of radio etiquette within the department. Coordinate all aspects of the ongoing implementation of the Avion Hospitality philosophy of service. Ensure correct and accurate cash handling at the Front Desk. Attend weekly staff meeting and provide training on a rotational basis using steps to effective training according to Avion Hospitality standards. Obtain all necessary information when taking room reservations. Ensure logging and delivery of all messages, packages, and mail in a timely and professional manner. Be aware of all rates, packages and promotions currently underway. Follow and enforce all Avion Hospitality hotel credit policies. Process and handle guest laundry. Ensure that employees are, at all times, attentive, friendly, helpful and courteous to all guests, managers and other employees. Maintain and monitor "Lost and Found" procedures and policies according to Avion Hospitality standards. Establish and maintain key control system. Ensure participation within department for monthly Avion team meeting. Focus the Front Desk Department on their role in contributing to the guest service scores. Monitor all V.I.P.'s, special guests and requests. Maintain required pars of all front office and stationary supplies. Review Front Office log book and Guest Request log on a daily basis. Assist the General Manager and Engineering Department in implementing and maintaining emergency procedures. Maintain an organized and comprehensive filing system with documentation of purchases, vouchering, schedules, forecasts, reports and tracking logs. Conduct meetings according to Avion Hospitality standards as required by management. Other duties as required. Education & Experience At least 5 years of progressive experience in a hotel or a related field. Supervisory experience required. Must be proficient in Windows operating systems, Company approved spreadsheets and word processing. Must have a valid driver's license from the applicable state. Must be able to convey information and ideas clearly. Must be able to evaluate and select among alternative courses of action quickly and accurately. Must work well in stressful, high-pressure situations. Must maintain composure and objectivity under pressure. Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary. Must have the ability to assimilate complex information, data, etc., from disparate sources and consider, adjust or modify to meet the constraints of the particular need. Must be effective at listening to, understanding, and clarifying the concerns and issues raised by coworkers and guests. Must be able to work with and understand financial information and data, and basic arithmetic functions. PIdba5-
07/24/2026
Full time
The Front Office Manager is responsible for ensuring the operation of the Front Office in an attentive friendly, efficient and courteous manner, providing all guests with quality service prior to and throughout their stay, while maximizing room revenue and occupancy. Respond to all guest requests, problems, complaints and/or accidents presented at the Front Desk or through Reservations, in an attentive, courteous and efficient manner. Follow up to ensure guest satisfaction. Motivate, coach, counsel and discipline all Front Desk personnel according to Avion Hospitality S.O.P.'s. Ensure compliance to brand and company training, using the steps to effective training according to Avion Hospitality standards. Develop employee morale and ensure training of Front Desk personnel. Maximize room revenue and occupancy by reviewing status daily. Analyze rate efficiency, monitor credit report and maintain close observation of daily house count. Supervise the Night Audit function and monitor the House Charge Worksheet and Flash Report for accuracy. Participate in required M.O.D. program as scheduled. Review Front Desk staff's worked hours for payroll compilation and submit to HR on a timely basis. Prepare employee Schedule according to business forecast, payroll budget guidelines and productivity requirements. Present with Wage Progress Report to AGM weekly. Ensure that no-show revenue is maximized through consistent and accurate billing. Maintain Avion Hospitality S.O.P.'s regarding Purchase Orders, vouchering of invoices and checkbook accounting. Ensure that Wage Progress, Productivity and the Ten-Day Forecast are completed on a timely basis according to Avion Hospitality S.O.P.'s. Maintain a professional working relationship and promote open lines of communication with managers, employees and other departments. Work closely with Accounting on follow-up items, i.e. rejected credit cards, employee discrepancies, etc. Operate all aspects of the Front Office computer system, including software maintenance, report generation and analysis, and simple programming. Monitor proper operation of the P.B.X. console and ensure that employees maintain Avion Hospitality S.O.P.'s in its use. Monitor the process of taking reservations ensuring that Avion Hospitality courtesy and up selling techniques are maintained. Greet and welcome all guests approaching the Front Desk in accordance with Avion Hospitality S.O.P.'s. Ensure implementation of all Avion Hospitality policies and house rules. Operate radios efficiently and professionally in communicating with hotel staff. Ensure the proper use of radio etiquette within the department. Coordinate all aspects of the ongoing implementation of the Avion Hospitality philosophy of service. Ensure correct and accurate cash handling at the Front Desk. Attend weekly staff meeting and provide training on a rotational basis using steps to effective training according to Avion Hospitality standards. Obtain all necessary information when taking room reservations. Ensure logging and delivery of all messages, packages, and mail in a timely and professional manner. Be aware of all rates, packages and promotions currently underway. Follow and enforce all Avion Hospitality hotel credit policies. Process and handle guest laundry. Ensure that employees are, at all times, attentive, friendly, helpful and courteous to all guests, managers and other employees. Maintain and monitor "Lost and Found" procedures and policies according to Avion Hospitality standards. Establish and maintain key control system. Ensure participation within department for monthly Avion team meeting. Focus the Front Desk Department on their role in contributing to the guest service scores. Monitor all V.I.P.'s, special guests and requests. Maintain required pars of all front office and stationary supplies. Review Front Office log book and Guest Request log on a daily basis. Assist the General Manager and Engineering Department in implementing and maintaining emergency procedures. Maintain an organized and comprehensive filing system with documentation of purchases, vouchering, schedules, forecasts, reports and tracking logs. Conduct meetings according to Avion Hospitality standards as required by management. Other duties as required. Education & Experience At least 5 years of progressive experience in a hotel or a related field. Supervisory experience required. Must be proficient in Windows operating systems, Company approved spreadsheets and word processing. Must have a valid driver's license from the applicable state. Must be able to convey information and ideas clearly. Must be able to evaluate and select among alternative courses of action quickly and accurately. Must work well in stressful, high-pressure situations. Must maintain composure and objectivity under pressure. Must be effective in handling problems in the workplace, including anticipating, preventing, identifying and solving problems as necessary. Must have the ability to assimilate complex information, data, etc., from disparate sources and consider, adjust or modify to meet the constraints of the particular need. Must be effective at listening to, understanding, and clarifying the concerns and issues raised by coworkers and guests. Must be able to work with and understand financial information and data, and basic arithmetic functions. PIdba5-
Anderson Dahlen Description: Gray's Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication - cutting, forming, machining, welding, finishing, and complex assemblies - backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions, including but not limited to skill sets, experience and training, certifications, as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $105-$150/annually. Our comprehensive health plan options, including medical, dental, and vision insurance, provide our team members with the tools they need for treatment, preventative care, exams, and prescriptions. ADI's life, disability, and supplemental insurance options provide peace of mind and support to rely on in challenging times. Our team members overseas are offered private health insurance, life insurance, and an employee assistance program (EAP). Visa Sponsorship: This role is not eligible for visa sponsorship. POSITION SUMMARY The Machine Shop Manager leads Milling and Turning operations to achieve safety, quality, delivery, productivity, and compliance objectives. This role develops team capability, drives performance, and ensures consistent execution of processes that support business and customer requirements. Essential Duties and Responsibilities Plan, direct, and coordinate labor, equipment, and resources to achieve safety, quality, delivery, productivity, and financial objectives. Lead continuous improvement efforts and implement corrective actions to improve operational efficiency, machine utilization, and overall department performance. Evaluate and recommend capital equipment, tooling, and process improvements that strengthen long-term operational capability, advance automation through modern technology, improve agility, reduce lead times, and maximize throughput while optimizing staffing requirements in a low-volume, high-variability environment. Lead Engineer-to-Order (ETO) projects and partner with cross-functional teams to resolve production, scheduling, and delivery issues. Support execution of project requirements, schedules, and customer expectations, and resolve issues, mitigate risks, and drive performance. Oversee work quality, machine setup, and the use of precision measuring instruments to ensure conformance with specifications and established standards. Promote a strong safety mindset culture and ensure compliance with company policies, procedures, and safety requirements. Responsible for hiring, onboarding, training, performance management, and the development of direct reports and team members, fostering a challenging and rewarding work environment that builds a highly capable, accountable, and world-class team. A highly engaged production team member who fosters cross-functional collaboration to support company strategy, leverage advanced technology, and optimize productivity while upholding quality and safety standards. Other duties as assigned. Requirements: Qualifications Bachelor's degree or equivalent experience, with at least five years in manufacturing or a related field; or an equivalent combination of education and experience. Experience with ERP systems and proficiency in Microsoft Excel, Word, and PowerPoint. Strong knowledge of machining, inspection, saw operations, GD&T, Lean Manufacturing, 5S, and production planning and scheduling. Knowledge of company products or comparable precision manufacturing environments. Demonstrated judgment, initiative, and accountability in complex operating environments. Strong leadership, interpersonal, problem-solving, and decision-making skills. Ability to interpret data, make sound business decisions, and apply mathematical concepts, including geometry and trigonometry. PHYSICAL REQUIREMENTS The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift/Carry-0-10 lbs. continuously, 11-50 lbs. frequently, 51-100 lbs. never Push/Pull-0-25 lbs. continuously, 26-100 lbs. frequently Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 00 Yearly Salary PI08a6f5de8e48-2520
07/24/2026
Full time
Anderson Dahlen Description: Gray's Specialty Equipment segment offers a comprehensive range of expert services to design, manufacture, integrate, install, and maintain some of the most advanced systems on the market. The Specialty Equipment segment includes Anderson Dahlen, located in Ramsey, MN, and Waconia, MN. Anderson Dahlen delivers end-to-end equipment design-build and contract manufacturing, with precision fabrication - cutting, forming, machining, welding, finishing, and complex assemblies - backed by engineering, integration, and complete process solutions including skids and sanitary platforms tailored to customer applications. Anderson Dahlen is ISO 9001:2015 certified, as well as ASME, AWS, and PED compliant. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions, including but not limited to skill sets, experience and training, certifications, as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $105-$150/annually. Our comprehensive health plan options, including medical, dental, and vision insurance, provide our team members with the tools they need for treatment, preventative care, exams, and prescriptions. ADI's life, disability, and supplemental insurance options provide peace of mind and support to rely on in challenging times. Our team members overseas are offered private health insurance, life insurance, and an employee assistance program (EAP). Visa Sponsorship: This role is not eligible for visa sponsorship. POSITION SUMMARY The Machine Shop Manager leads Milling and Turning operations to achieve safety, quality, delivery, productivity, and compliance objectives. This role develops team capability, drives performance, and ensures consistent execution of processes that support business and customer requirements. Essential Duties and Responsibilities Plan, direct, and coordinate labor, equipment, and resources to achieve safety, quality, delivery, productivity, and financial objectives. Lead continuous improvement efforts and implement corrective actions to improve operational efficiency, machine utilization, and overall department performance. Evaluate and recommend capital equipment, tooling, and process improvements that strengthen long-term operational capability, advance automation through modern technology, improve agility, reduce lead times, and maximize throughput while optimizing staffing requirements in a low-volume, high-variability environment. Lead Engineer-to-Order (ETO) projects and partner with cross-functional teams to resolve production, scheduling, and delivery issues. Support execution of project requirements, schedules, and customer expectations, and resolve issues, mitigate risks, and drive performance. Oversee work quality, machine setup, and the use of precision measuring instruments to ensure conformance with specifications and established standards. Promote a strong safety mindset culture and ensure compliance with company policies, procedures, and safety requirements. Responsible for hiring, onboarding, training, performance management, and the development of direct reports and team members, fostering a challenging and rewarding work environment that builds a highly capable, accountable, and world-class team. A highly engaged production team member who fosters cross-functional collaboration to support company strategy, leverage advanced technology, and optimize productivity while upholding quality and safety standards. Other duties as assigned. Requirements: Qualifications Bachelor's degree or equivalent experience, with at least five years in manufacturing or a related field; or an equivalent combination of education and experience. Experience with ERP systems and proficiency in Microsoft Excel, Word, and PowerPoint. Strong knowledge of machining, inspection, saw operations, GD&T, Lean Manufacturing, 5S, and production planning and scheduling. Knowledge of company products or comparable precision manufacturing environments. Demonstrated judgment, initiative, and accountability in complex operating environments. Strong leadership, interpersonal, problem-solving, and decision-making skills. Ability to interpret data, make sound business decisions, and apply mathematical concepts, including geometry and trigonometry. PHYSICAL REQUIREMENTS The company fosters a manufacturing-type environment. The physical demands described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lift/Carry-0-10 lbs. continuously, 11-50 lbs. frequently, 51-100 lbs. never Push/Pull-0-25 lbs. continuously, 26-100 lbs. frequently Bend- 0-33% during an 8-hour shift Twist/Turn- 0-33% during an 8-hour shift Kneel/Squat- Not at all Sit- 67-100% during an 8-hour shift. Stand/Walk- 0-33% during an 8-hour shift Overhead Reaching- 0-33% during an 8-hour shift Ladder/Stair- 0-33% during an 8-hour shift EEO DISCLAIMER Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Compensation details: 00 Yearly Salary PI08a6f5de8e48-2520
Aladdin Temp-Rite designs, manufactures and sells meal-delivery systems, equipment and tray top supplies for the food service industry. We've been the recognized leader in healthcare food service for more than 50 years. You'll find our products in thousands of hospitals and healthcare facilities throughout North America and beyond. Our engineering, product design, manufacturing, and support teams are all based in our 350,000 sq. ft. HQ and manufacturing facility near Nashville, TN. Aladdin employees will always be first to help healthcare providers improve their mission of caring for others. With innovations in new products and technology, combined with made-in-America quality and exceptional customer service, our commitment to creating a difference goes beyond just a business philosophy. We're dedicated to helping people in need. POSITION SUMMARY As a Territory Sales Manager, you will be the central player in the sales activities within your assigned territory. You will focus on maintaining existing customer business as well as for growing the company's business through a consultative selling process. As a Territory Sales Manager you will develop and leverage knowledge of Aladdin and our competitor's systems along with the standard practices of our customers' operations. RESPONSIBILITIES Territory Sales Manager develops a sales strategy for acquiring new business within an assigned area. This will be based on a combination of factors including the use of: trade show leads, referrals, existing customer base, and new prospects identified through our contact management database of competitive accounts. Territory Sales Manager services existing customers which may include the evaluation of the condition of current equipment, updating customers on new products, ensuring existing equipment is being used properly, helping customer with any quality issues, and ensuring that our competition is not diminishing our ongoing business. Territory Sales Manager provides the necessary start-up or in-service training for any new healthcare facility including training of the dietary staff on the proper use of a new system or how to use our capital equipment properly and to monitor its performance during an initial period. QUALIFICATIONS Four-year college degree, preferably in business (or comparable experience) Minimum of two years sales experience preferred. Experience in the food sales or the institutional food service industry and/or a healthcare system is necessary. Experience in the healthcare market and/or equipment sales a plus. Ability to travel overnight up to 75% . Live within assigned territory preferably Seattle MSA. Must be goal oriented and have strong interpersonal skills and problem-solving skills, a strong working knowledge of computers and related software, and strong analytical skills. . All qualified applicants will receive consideration for employment without regard to disability, race, color, religion, sex, sexual orientation, gender identity or national origin. Compensation details: 00 Yearly Salary PI0e6296b3d3e9-8143
07/24/2026
Full time
Aladdin Temp-Rite designs, manufactures and sells meal-delivery systems, equipment and tray top supplies for the food service industry. We've been the recognized leader in healthcare food service for more than 50 years. You'll find our products in thousands of hospitals and healthcare facilities throughout North America and beyond. Our engineering, product design, manufacturing, and support teams are all based in our 350,000 sq. ft. HQ and manufacturing facility near Nashville, TN. Aladdin employees will always be first to help healthcare providers improve their mission of caring for others. With innovations in new products and technology, combined with made-in-America quality and exceptional customer service, our commitment to creating a difference goes beyond just a business philosophy. We're dedicated to helping people in need. POSITION SUMMARY As a Territory Sales Manager, you will be the central player in the sales activities within your assigned territory. You will focus on maintaining existing customer business as well as for growing the company's business through a consultative selling process. As a Territory Sales Manager you will develop and leverage knowledge of Aladdin and our competitor's systems along with the standard practices of our customers' operations. RESPONSIBILITIES Territory Sales Manager develops a sales strategy for acquiring new business within an assigned area. This will be based on a combination of factors including the use of: trade show leads, referrals, existing customer base, and new prospects identified through our contact management database of competitive accounts. Territory Sales Manager services existing customers which may include the evaluation of the condition of current equipment, updating customers on new products, ensuring existing equipment is being used properly, helping customer with any quality issues, and ensuring that our competition is not diminishing our ongoing business. Territory Sales Manager provides the necessary start-up or in-service training for any new healthcare facility including training of the dietary staff on the proper use of a new system or how to use our capital equipment properly and to monitor its performance during an initial period. QUALIFICATIONS Four-year college degree, preferably in business (or comparable experience) Minimum of two years sales experience preferred. Experience in the food sales or the institutional food service industry and/or a healthcare system is necessary. Experience in the healthcare market and/or equipment sales a plus. Ability to travel overnight up to 75% . Live within assigned territory preferably Seattle MSA. Must be goal oriented and have strong interpersonal skills and problem-solving skills, a strong working knowledge of computers and related software, and strong analytical skills. . All qualified applicants will receive consideration for employment without regard to disability, race, color, religion, sex, sexual orientation, gender identity or national origin. Compensation details: 00 Yearly Salary PI0e6296b3d3e9-8143
Overview The Transition to Practice Program Coach provides staff hired into the program with ongoing guidance to achieve their greatest potential. Responsible for monitoring onboarding / orientation process and implementing changes. Conducts and facilitates classroom and on the job training to synthesize knowledge, increase skill development and promote interpersonal growth. Works closely with preceptors and unit leadership. Completes and evaluates benchmark data for each orientee. Aids in the planning and execution of program events. Provides a high level of support to staff hired through the program to support strong retention and engagement. Qualifications Certifications: Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR); Basic Life Support (BLS) within 30 days - American Heart Association (AHA), Education: College Diploma: Nursing; Bachelor's Degree: Nursing; H.S. Diploma/GED, Work Experience: Related field Responsibilities Monitors and completes competency modules Support staff through intensive rounding in department and individual coaching sessions Collaborate with team members to develop schedules and create preceptor assignments Conducts analysis through the onboarding / orientation process to assure advancement of skill and provision of safe patient care Conducts classroom orientation using a variety of learning methods Support staff during dayshift and nightshift hours / weekends Maintain clear communication with unit leadership teams Support recruitment and retention events as needed Provides direct patient care when on the unit. Shadow staff to ensure the progression of skills. Support staff through rounding and follow-up. Complete all mandatory training and competency modules. About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $19.37per hour - $31.38per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
07/24/2026
Full time
Overview The Transition to Practice Program Coach provides staff hired into the program with ongoing guidance to achieve their greatest potential. Responsible for monitoring onboarding / orientation process and implementing changes. Conducts and facilitates classroom and on the job training to synthesize knowledge, increase skill development and promote interpersonal growth. Works closely with preceptors and unit leadership. Completes and evaluates benchmark data for each orientee. Aids in the planning and execution of program events. Provides a high level of support to staff hired through the program to support strong retention and engagement. Qualifications Certifications: Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR); Basic Life Support (BLS) within 30 days - American Heart Association (AHA), Education: College Diploma: Nursing; Bachelor's Degree: Nursing; H.S. Diploma/GED, Work Experience: Related field Responsibilities Monitors and completes competency modules Support staff through intensive rounding in department and individual coaching sessions Collaborate with team members to develop schedules and create preceptor assignments Conducts analysis through the onboarding / orientation process to assure advancement of skill and provision of safe patient care Conducts classroom orientation using a variety of learning methods Support staff during dayshift and nightshift hours / weekends Maintain clear communication with unit leadership teams Support recruitment and retention events as needed Provides direct patient care when on the unit. Shadow staff to ensure the progression of skills. Support staff through rounding and follow-up. Complete all mandatory training and competency modules. About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $19.37per hour - $31.38per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
Aladdin Temp-Rite designs, manufactures and sells meal-delivery systems, equipment and tray top supplies for the food service industry. We've been the recognized leader in healthcare food service for more than 50 years. You'll find our products in thousands of hospitals and healthcare facilities throughout North America and beyond. Our engineering, product design, manufacturing, and support teams are all based in our 350,000 sq. ft. HQ and manufacturing facility near Nashville, TN. Aladdin employees will always be first to help healthcare providers improve their mission of caring for others. With innovations in new products and technology, combined with made-in-America quality and exceptional customer service, our commitment to creating a difference goes beyond just a business philosophy. We're dedicated to helping people in need. POSITION SUMMARY As a Territory Sales Manager, you will be the central player in the sales activities within your assigned territory. You will focus on maintaining existing customer business as well as for growing the company's business through a consultative selling process. As a Territory Sales Manager you will develop and leverage knowledge of Aladdin and our competitor's systems along with the standard practices of our customers' operations. RESPONSIBILITIES Territory Sales Manager develops a sales strategy for acquiring new business within an assigned area. This will be based on a combination of factors including the use of: trade show leads, referrals, existing customer base, and new prospects identified through our contact management database of competitive accounts. Territory Sales Manager services existing customers which may include the evaluation of the condition of current equipment, updating customers on new products, ensuring existing equipment is being used properly, helping customer with any quality issues, and ensuring that our competition is not diminishing our ongoing business. Territory Sales Manager provides the necessary start-up or in-service training for any new healthcare facility including training of the dietary staff on the proper use of a new system or how to use our capital equipment properly and to monitor its performance during an initial period. QUALIFICATIONS Four-year college degree, preferably in business (or comparable experience) Minimum of two years sales experience preferred. Experience in the food sales or the institutional food service industry and/or a healthcare system is necessary. Experience in the healthcare market and/or equipment sales a plus. Ability to travel overnight up to 75% . Live within assigned territory preferably Seattle MSA. Must be goal oriented and have strong interpersonal skills and problem-solving skills, a strong working knowledge of computers and related software, and strong analytical skills. . All qualified applicants will receive consideration for employment without regard to disability, race, color, religion, sex, sexual orientation, gender identity or national origin. Compensation details: 00 Yearly Salary PI53c439a627f9-7876
07/24/2026
Full time
Aladdin Temp-Rite designs, manufactures and sells meal-delivery systems, equipment and tray top supplies for the food service industry. We've been the recognized leader in healthcare food service for more than 50 years. You'll find our products in thousands of hospitals and healthcare facilities throughout North America and beyond. Our engineering, product design, manufacturing, and support teams are all based in our 350,000 sq. ft. HQ and manufacturing facility near Nashville, TN. Aladdin employees will always be first to help healthcare providers improve their mission of caring for others. With innovations in new products and technology, combined with made-in-America quality and exceptional customer service, our commitment to creating a difference goes beyond just a business philosophy. We're dedicated to helping people in need. POSITION SUMMARY As a Territory Sales Manager, you will be the central player in the sales activities within your assigned territory. You will focus on maintaining existing customer business as well as for growing the company's business through a consultative selling process. As a Territory Sales Manager you will develop and leverage knowledge of Aladdin and our competitor's systems along with the standard practices of our customers' operations. RESPONSIBILITIES Territory Sales Manager develops a sales strategy for acquiring new business within an assigned area. This will be based on a combination of factors including the use of: trade show leads, referrals, existing customer base, and new prospects identified through our contact management database of competitive accounts. Territory Sales Manager services existing customers which may include the evaluation of the condition of current equipment, updating customers on new products, ensuring existing equipment is being used properly, helping customer with any quality issues, and ensuring that our competition is not diminishing our ongoing business. Territory Sales Manager provides the necessary start-up or in-service training for any new healthcare facility including training of the dietary staff on the proper use of a new system or how to use our capital equipment properly and to monitor its performance during an initial period. QUALIFICATIONS Four-year college degree, preferably in business (or comparable experience) Minimum of two years sales experience preferred. Experience in the food sales or the institutional food service industry and/or a healthcare system is necessary. Experience in the healthcare market and/or equipment sales a plus. Ability to travel overnight up to 75% . Live within assigned territory preferably Seattle MSA. Must be goal oriented and have strong interpersonal skills and problem-solving skills, a strong working knowledge of computers and related software, and strong analytical skills. . All qualified applicants will receive consideration for employment without regard to disability, race, color, religion, sex, sexual orientation, gender identity or national origin. Compensation details: 00 Yearly Salary PI53c439a627f9-7876
Denali Water Solutions LLC
Lexington, North Carolina
About Company: About DenaliDenali is the leading organic recycling company on a mission to unlock the power of unused food and organics, transforming them into resources to feed, fuel and replenish the earth. Our work is essential to keeping water clean, reducing the need for new landfill capacity, building soil fertility, helping farmers be more resilient, and reducing society's reliance on fossil fuels. Denali provides meaningful and measurable change for any business that handles food, creating value with our scalable solutions across the nation. Our services and products touch thousands of acres and businesses, millions of tons of organic material, and nearly every person who purchases and consumes food in the U.S. Apply to join our team today! Heavy Equipment Operations Supervisor - Compost & Mulch Location: Advance, NC Full-Time / Salary Position Summary The Heavy Equipment Operations Supervisor - Compost & Mulch is responsible for supervising activities related to receiving, handling, processing, composting, and selling bulk organic materials as part of the facility operations leadership team. This is a hands-on leadership role requiring strong yard management experience, heavy equipment operating expertise, and the ability to lead by example in a fast-paced outdoor production environment. The Heavy Equipment Operations Supervisor - Compost & Mulch oversees equipment operators to ensure safe and efficient day-to-day operations in compliance with all safety, environmental, and other relevant policies, procedures, requirements, and standards. The supervisor is expected to operate heavy equipment as needed to support production goals, train and develop operators, and maintain efficient material flow throughout the facility. They work closely with the Facility Manager and other members of the facility leadership team to drive continuous improvement, deliver high-quality products to customers, and meet budget objectives. Key Responsibilities Develop a workplace culture in line with Denali's four values: Care For Our Future, Climb Higher, Dig Deeper, and Stand Together. Understand, communicate, enforce, and adhere to safe work practices and all applicable safety and environmental regulations, policies, procedures, and standards. Ensure efficient, safe operation of equipment, including but not limited to wheel loaders, excavators, dozers, grinders, screens, coloring, and mixing equipment. Work with operators to identify and remove unsafe work conditions. Collaborate with maintenance team and enforce daily equipment housekeeping to minimize downtime and maximize productive equipment utilization. Assist with preventative maintenance and minor repairs of equipment. Implement and maintain asset management practices to track equipment performance and utilization. Ensure composting operations are completed in compliance with all regulatory requirements. Maintain composting data records, including temperatures, product testing, windrow/pile age, etc. Work closely with other members of the facility leadership team to ensure product is ready for bagging and bulk sales. Support bag production schedules and communicate effectively with sales staff to understand bulk demand. Contribute to planning and ensure compliance with site plans for material flow, including pile content identification, site layout and organization, and equipment and material movement. Manage inbound materials, determine whether new materials are acceptable, and ensure materials are tipped in the correct locations. Ensure facility is maintained to support operations, including by managing roads and material pile construction to ensure proper stormwater flow. Complete post-incident reviews and documentation for all injuries, accidents, and incidents. Work with the Facility Manager to implement necessary coaching and/or retraining. Ensure adequate staffing to achieve operational objectives. Communicate with frontline employees daily to establish expectations. Provide feedback on performance goals, explain daily operating plans, and enforce safety standards. Utilize daily and weekly operating reports to analyze trends, identify bottlenecks, and drive operational improvements. Identify and implement process improvement initiatives to enhance efficiency and output. Provide hands-on leadership by operating heavy equipment as needed to support daily production and staffing requirements. Manage day-to-day yard operations, including equipment utilization, traffic flow, material placement, and overall site organization. Train, coach, and mentor equipment operators on safe operating practices, productivity expectations, and equipment care. Monitor yard activities to ensure efficient movement of materials and equipment while maintaining a safe work environment. Communicate effectively with operators, maintenance personnel, leadership, and other departments to coordinate operational priorities and resolve issues. Lead by example through active participation in operational activities and a visible presence in the yard. Minimum Qualifications High school diploma or equivalent required 2+ years of supervisory experience Experience with operating and maintaining heavy equipment Experience managing yard operations, material flow, and equipment utilization Proven leadership experience managing and developing teams Strong verbal and written communication skills Preferred Qualifications Experience supervising heavy equipment operators in a composting, mulch, aggregate, recycling, landscaping, construction, or similar outdoor production environment 3+ years in Composting, Operations Management, Agriculture, Industrial Engineering, or related discipline Certified Compost Operations Manager (CCOM) or Certified Composting Professional (CCM) certification Experience with asset/equipment management systems Basic proficiency in Microsoft Office, including Outlook and Excel Bilingual fluency (English & Spanish) is a plus Core Competencies & Skills Strong leadership and team development skills Ability to multi-task, prioritize, and manage time effectively Ability to troubleshoot equipment performance issues quickly and effectively Skilled in workflow planning, shift coordination, and labor allocation Ability to analyze operational reports and implement data-driven improvements Strong organizational and communication skills Strong yard management and material flow coordination skills Exceptional communication and interpersonal skills Ability to lead by example and motivate teams in a hands-on operational environment Advanced heavy equipment operating knowledge and experience Strong decision-making skills in fast-paced production environments Work Environment Manufacturing and industrial production setting Exposure to moving machinery, forklifts, and industrial equipment May require extended periods of sitting, standing, and walking What We Offer Mission-driven work in a rapidly growing sustainability company Opportunities for professional growth and learning Collaborative, values-driven team culture Competitive salary and benefits Why You'll Love Working at Denali- Benefits & Perks At Denali, the work we do begins and ends with you - our employees. That's why we strive to ELEVATE you to be your best, both at work and at home. Our benefits aren't just about compensation; they're part of a broader commitment to helping you thrive in all aspects of life. Here's how we live out our values every day: E - Employee : At Denali, we believe in offering competitive compensation packages that include not only great benefits but also a strong focus on safety, flexibility, and rewards and recognition. You are the backbone of our success, and we make sure you're valued every step of the way. L - Learning : We're committed to your growth and development. Our Ascend Employee Development Program and access to over 6,000 professional courses via our Learning Management System empower you to climb higher in your career - all at no cost to you. E - Environment : Our employees deserve a clean Earth. We're dedicated to doing our part in keeping waste out of landfills, so you can be proud of the work we do together to make a positive environmental impact. V - Valued : At Denali, we take pride in creating a culture of care. With resources that support your well-being, volunteerism opportunities, and a commitment to safe working conditions and inclusivity, you'll always feel like you belong here. A - Advancement : We believe in succession planning and providing opportunities for advancement. We want you to grow, and we'll be right there with you, supporting your career every step of the way. T - Together : We're stronger when we work together. At Denali, you'll have opportunities to give and receive support not just within the workplace, but within our broader community. Our team is united, and we celebrate the value of working and succeeding as one. E - Employees : You are the heart of Denali . click apply for full job details
07/24/2026
Full time
About Company: About DenaliDenali is the leading organic recycling company on a mission to unlock the power of unused food and organics, transforming them into resources to feed, fuel and replenish the earth. Our work is essential to keeping water clean, reducing the need for new landfill capacity, building soil fertility, helping farmers be more resilient, and reducing society's reliance on fossil fuels. Denali provides meaningful and measurable change for any business that handles food, creating value with our scalable solutions across the nation. Our services and products touch thousands of acres and businesses, millions of tons of organic material, and nearly every person who purchases and consumes food in the U.S. Apply to join our team today! Heavy Equipment Operations Supervisor - Compost & Mulch Location: Advance, NC Full-Time / Salary Position Summary The Heavy Equipment Operations Supervisor - Compost & Mulch is responsible for supervising activities related to receiving, handling, processing, composting, and selling bulk organic materials as part of the facility operations leadership team. This is a hands-on leadership role requiring strong yard management experience, heavy equipment operating expertise, and the ability to lead by example in a fast-paced outdoor production environment. The Heavy Equipment Operations Supervisor - Compost & Mulch oversees equipment operators to ensure safe and efficient day-to-day operations in compliance with all safety, environmental, and other relevant policies, procedures, requirements, and standards. The supervisor is expected to operate heavy equipment as needed to support production goals, train and develop operators, and maintain efficient material flow throughout the facility. They work closely with the Facility Manager and other members of the facility leadership team to drive continuous improvement, deliver high-quality products to customers, and meet budget objectives. Key Responsibilities Develop a workplace culture in line with Denali's four values: Care For Our Future, Climb Higher, Dig Deeper, and Stand Together. Understand, communicate, enforce, and adhere to safe work practices and all applicable safety and environmental regulations, policies, procedures, and standards. Ensure efficient, safe operation of equipment, including but not limited to wheel loaders, excavators, dozers, grinders, screens, coloring, and mixing equipment. Work with operators to identify and remove unsafe work conditions. Collaborate with maintenance team and enforce daily equipment housekeeping to minimize downtime and maximize productive equipment utilization. Assist with preventative maintenance and minor repairs of equipment. Implement and maintain asset management practices to track equipment performance and utilization. Ensure composting operations are completed in compliance with all regulatory requirements. Maintain composting data records, including temperatures, product testing, windrow/pile age, etc. Work closely with other members of the facility leadership team to ensure product is ready for bagging and bulk sales. Support bag production schedules and communicate effectively with sales staff to understand bulk demand. Contribute to planning and ensure compliance with site plans for material flow, including pile content identification, site layout and organization, and equipment and material movement. Manage inbound materials, determine whether new materials are acceptable, and ensure materials are tipped in the correct locations. Ensure facility is maintained to support operations, including by managing roads and material pile construction to ensure proper stormwater flow. Complete post-incident reviews and documentation for all injuries, accidents, and incidents. Work with the Facility Manager to implement necessary coaching and/or retraining. Ensure adequate staffing to achieve operational objectives. Communicate with frontline employees daily to establish expectations. Provide feedback on performance goals, explain daily operating plans, and enforce safety standards. Utilize daily and weekly operating reports to analyze trends, identify bottlenecks, and drive operational improvements. Identify and implement process improvement initiatives to enhance efficiency and output. Provide hands-on leadership by operating heavy equipment as needed to support daily production and staffing requirements. Manage day-to-day yard operations, including equipment utilization, traffic flow, material placement, and overall site organization. Train, coach, and mentor equipment operators on safe operating practices, productivity expectations, and equipment care. Monitor yard activities to ensure efficient movement of materials and equipment while maintaining a safe work environment. Communicate effectively with operators, maintenance personnel, leadership, and other departments to coordinate operational priorities and resolve issues. Lead by example through active participation in operational activities and a visible presence in the yard. Minimum Qualifications High school diploma or equivalent required 2+ years of supervisory experience Experience with operating and maintaining heavy equipment Experience managing yard operations, material flow, and equipment utilization Proven leadership experience managing and developing teams Strong verbal and written communication skills Preferred Qualifications Experience supervising heavy equipment operators in a composting, mulch, aggregate, recycling, landscaping, construction, or similar outdoor production environment 3+ years in Composting, Operations Management, Agriculture, Industrial Engineering, or related discipline Certified Compost Operations Manager (CCOM) or Certified Composting Professional (CCM) certification Experience with asset/equipment management systems Basic proficiency in Microsoft Office, including Outlook and Excel Bilingual fluency (English & Spanish) is a plus Core Competencies & Skills Strong leadership and team development skills Ability to multi-task, prioritize, and manage time effectively Ability to troubleshoot equipment performance issues quickly and effectively Skilled in workflow planning, shift coordination, and labor allocation Ability to analyze operational reports and implement data-driven improvements Strong organizational and communication skills Strong yard management and material flow coordination skills Exceptional communication and interpersonal skills Ability to lead by example and motivate teams in a hands-on operational environment Advanced heavy equipment operating knowledge and experience Strong decision-making skills in fast-paced production environments Work Environment Manufacturing and industrial production setting Exposure to moving machinery, forklifts, and industrial equipment May require extended periods of sitting, standing, and walking What We Offer Mission-driven work in a rapidly growing sustainability company Opportunities for professional growth and learning Collaborative, values-driven team culture Competitive salary and benefits Why You'll Love Working at Denali- Benefits & Perks At Denali, the work we do begins and ends with you - our employees. That's why we strive to ELEVATE you to be your best, both at work and at home. Our benefits aren't just about compensation; they're part of a broader commitment to helping you thrive in all aspects of life. Here's how we live out our values every day: E - Employee : At Denali, we believe in offering competitive compensation packages that include not only great benefits but also a strong focus on safety, flexibility, and rewards and recognition. You are the backbone of our success, and we make sure you're valued every step of the way. L - Learning : We're committed to your growth and development. Our Ascend Employee Development Program and access to over 6,000 professional courses via our Learning Management System empower you to climb higher in your career - all at no cost to you. E - Environment : Our employees deserve a clean Earth. We're dedicated to doing our part in keeping waste out of landfills, so you can be proud of the work we do together to make a positive environmental impact. V - Valued : At Denali, we take pride in creating a culture of care. With resources that support your well-being, volunteerism opportunities, and a commitment to safe working conditions and inclusivity, you'll always feel like you belong here. A - Advancement : We believe in succession planning and providing opportunities for advancement. We want you to grow, and we'll be right there with you, supporting your career every step of the way. T - Together : We're stronger when we work together. At Denali, you'll have opportunities to give and receive support not just within the workplace, but within our broader community. Our team is united, and we celebrate the value of working and succeeding as one. E - Employees : You are the heart of Denali . click apply for full job details
Overview Performs the functions necessary for constant observation of cardiac monitors for telemetry patients including: observation, interpretation, and documentation of cardiac rhythms and notification of changes to the appropriate nursing staff . Works as a member of the patient care team to facilitate and assist in the daily operation of the nursing unit. To perform indirect patient care activities such as chart management, ordering of supplies, answering phones, and answering call lights. Qualifications Certifications: , Education: , Work Experience: Responsibilities Demonstrates clinical competency in cardiac monitoring and interpretation of rhythms and effectively communicates changes in rhythm to the appropriate staff. Performs job responsibilities per designated telemetry protocols and guidelines. Per admission protocol: a) Prepares monitor data bank for initial application of telemetry on patients with new telemetry orders. b) Completes patient verification process with floor personnel c) Obtains and interprets an ECG tracing for each new patient. Ongoing shift responsibilities a) Continually observes and interprets cardiac rhythms of all monitored patients. b) Obtains, interprets, and documents ECG tracing with rhythm, rate, PR, QRS, QT measurements, ectopy or other variances of each monitored patient a minimum of every 12 hours, as changes occur, or per staff requests for inclusion in the patient's medical record c) Makes routine and timely checks on the status of patients who are off telemetry monitoring for tests or procedures. d) Maintains continual ST segment monitoring on all CVCU and ICU patients unless receives instructions to the contrary from the assigned RN. e) Completes review of alarm history each shift. Provides documentation summary and staff notification as appropriate. Assists in Rapid Response or Code Blue, cardioversion, medication mediation for arrythmias, and reprogramming of pacemakers by running ECG strips from the monitors as appropriate. Follows protocols for notification and documentation of rhythm changes, signal or equipment problems, change in pt location, and removing/reinstituting telemetry on patients during routine care/activity or when leaving the floor for procedures. Communicates promptly, effectively, and clearly to floor staff regarding issues with low batteries, poor signal, loose/disconnected lead wires, incorrect lead placement, etc. Answers the telephone, directs incoming calls and takes messages that are accurate and complete. Answers call lights and locates appropriate staff to respond. Performs other support duties (typing, filing and copying) as requested. Completes patient verification process with floor personnel for 1) pt identification and 2) placement of assigned monitor for every patient placed on telemetry. Ensures each ECG tracing is labeled with the patient's last name, room number, medical record number, date & time, initials of monitor technician interpreting strip. Ensures alarms for detecting lifethreatening arrythmia remain on at all times. Labels monitor bank regarding specific pt procedures/tests/temporary location, treatments, IV drips, DNR status, AICD and pacemakers as appropriate. Demonstrates competency in entering patient data into the central telemetry monitor data bank. Promptly reports any situations that call for the attention of the registered nurse or department leadership. Attends & actively participates in inservices, meetings & continuing education programs Provides training for new monitor techs. Reports potential patient safety issues in timely fashion. Adheres to all behavioral and procedural patient safety practices. About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $17.91per hour - $29.01per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
07/24/2026
Full time
Overview Performs the functions necessary for constant observation of cardiac monitors for telemetry patients including: observation, interpretation, and documentation of cardiac rhythms and notification of changes to the appropriate nursing staff . Works as a member of the patient care team to facilitate and assist in the daily operation of the nursing unit. To perform indirect patient care activities such as chart management, ordering of supplies, answering phones, and answering call lights. Qualifications Certifications: , Education: , Work Experience: Responsibilities Demonstrates clinical competency in cardiac monitoring and interpretation of rhythms and effectively communicates changes in rhythm to the appropriate staff. Performs job responsibilities per designated telemetry protocols and guidelines. Per admission protocol: a) Prepares monitor data bank for initial application of telemetry on patients with new telemetry orders. b) Completes patient verification process with floor personnel c) Obtains and interprets an ECG tracing for each new patient. Ongoing shift responsibilities a) Continually observes and interprets cardiac rhythms of all monitored patients. b) Obtains, interprets, and documents ECG tracing with rhythm, rate, PR, QRS, QT measurements, ectopy or other variances of each monitored patient a minimum of every 12 hours, as changes occur, or per staff requests for inclusion in the patient's medical record c) Makes routine and timely checks on the status of patients who are off telemetry monitoring for tests or procedures. d) Maintains continual ST segment monitoring on all CVCU and ICU patients unless receives instructions to the contrary from the assigned RN. e) Completes review of alarm history each shift. Provides documentation summary and staff notification as appropriate. Assists in Rapid Response or Code Blue, cardioversion, medication mediation for arrythmias, and reprogramming of pacemakers by running ECG strips from the monitors as appropriate. Follows protocols for notification and documentation of rhythm changes, signal or equipment problems, change in pt location, and removing/reinstituting telemetry on patients during routine care/activity or when leaving the floor for procedures. Communicates promptly, effectively, and clearly to floor staff regarding issues with low batteries, poor signal, loose/disconnected lead wires, incorrect lead placement, etc. Answers the telephone, directs incoming calls and takes messages that are accurate and complete. Answers call lights and locates appropriate staff to respond. Performs other support duties (typing, filing and copying) as requested. Completes patient verification process with floor personnel for 1) pt identification and 2) placement of assigned monitor for every patient placed on telemetry. Ensures each ECG tracing is labeled with the patient's last name, room number, medical record number, date & time, initials of monitor technician interpreting strip. Ensures alarms for detecting lifethreatening arrythmia remain on at all times. Labels monitor bank regarding specific pt procedures/tests/temporary location, treatments, IV drips, DNR status, AICD and pacemakers as appropriate. Demonstrates competency in entering patient data into the central telemetry monitor data bank. Promptly reports any situations that call for the attention of the registered nurse or department leadership. Attends & actively participates in inservices, meetings & continuing education programs Provides training for new monitor techs. Reports potential patient safety issues in timely fashion. Adheres to all behavioral and procedural patient safety practices. About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $17.91per hour - $29.01per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
Veregy, an Energy Transition Company
Phoenix, Arizona
Job Description Job Description Veregy is an award-winning NAESCO-Accredited decarbonization company focusing on accelerating and simplifying Energy Transition. We provide turnkey engineering and construction services designed to reduce our clients' energy and operating costs through the implementation of energy efficiency and infrastructure upgrades, smart building technology, fleet EV infrastructure, clean energy generation, and sustainability. Do you want to be part of a TEAM who delivers Eco-Friendly Environments that Transform Lives? Then you are in the right place start the application process today! Summary of Position Functions The Foreman I - Electrical is responsible for directing and coordinating aspects of the field operations to effectively execute all assigned construction projects. Essential Position Functions Manages job site safety, pre-task plan compliance, safety equipment on job sites, and safety equipment expenses on the job site. Manages high-risk activities requiring safety upper management involvement. Manages job site productivity goals. Manages crew productivity and daily quantity tracking. Assigns tasks and directs work to ensure project goals are met safely and efficiently. Assures individuals are meeting productivity goals. Manages project layout, trade coordination, project quality control. Oversees tool and rental expenses on projects. Manages daily reports on job sites being completed, documentation (RFIs, drawings updates, submittals) and, job site photo documentation. Manages documentation on all risk management issues. Note: The statements contained herein describe the essential functions of this position but should not be an all-inclusive listing of work requirements. Individuals may perform other duties as assigned including work in other areas to cover absences or relief to equalize peak work periods or otherwise balance the workload. Non-Essential Position Functions Other duties as assigned. Supervisory Responsibilities Directly supervises employees at the job site. Carries out supervisory responsibilities in accordance with Veregy's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Education and Qualifications To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or fifteen years or more related experience and/or training; or equivalent combination of education and experience. Minimum of 15 years experience in the electrical trade required. 10 years or more of electrical commercial construction required. Must be competent in the use of NEC (National Electrical Code) book as reference material in performing or directing the performance of work required. Knowledge, Skills, and Abilities Knowledge of Veregy's services and processes is required which can be obtained through intellect, technical inclination, and dedication to gain such knowledge. Knowledge (Intermediate to advanced) of various operating systems, software products (e.g. MS Office, etc.), is required. Knowledge in all aspects of trade related materials, components, equipment, systems methods of installation, safety procedures, safe work practices, sizing and other calculations, use of hand and power tools. Knowledge in use of NEC (National Electrical Code) book as reference material in performing or directing the performance of work. Knowledge in the proper use of hand and power tools and operation of related equipment. Ability to read and accurately interpret project related drawings and documentation including plans, specifications, drawings, schematics, diagrams, sketches, and blueprints to ensure proper installation means and methods. Ability to work independently and efficiently manage time / workload. Ability to effectively respond to common inquiries or complaints from customers and staff. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to prioritize tasks and tactfully negotiate priority with end users. Ability to work under deadline pressure and extra hours if needed. Certificates, Licenses, Registrations Valid driver's license required. OSHA 30 Certification required. Benefits Competitive Compensation. Paid Holidays, Paid Sick Leave, and Paid Time Off. Competitive Medical, Dental and Vision Plans. 401k Retirement Plan with Matching Employer Contributions (%). Employer Sponsored Life Insurance and AD&D Insurance. Employer Paid Short- and Long-Term Disability Insurance. Continued Education and Trade Certification Sponsorship (Specific Positions). Company Branded Trucks Provided (Specific Positions). Applicants must be currently authorized to work in the United States on a full-time basis. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunity has been, and will continue to be, a fundamental principle at Veregy, where employment is based upon capabilities and qualifications without discrimination because of race, color, religion, sex, age, national origin, disability, veteran status, genetic history, sexual orientation, or any other protected characteristic as established by law.
07/24/2026
Full time
Job Description Job Description Veregy is an award-winning NAESCO-Accredited decarbonization company focusing on accelerating and simplifying Energy Transition. We provide turnkey engineering and construction services designed to reduce our clients' energy and operating costs through the implementation of energy efficiency and infrastructure upgrades, smart building technology, fleet EV infrastructure, clean energy generation, and sustainability. Do you want to be part of a TEAM who delivers Eco-Friendly Environments that Transform Lives? Then you are in the right place start the application process today! Summary of Position Functions The Foreman I - Electrical is responsible for directing and coordinating aspects of the field operations to effectively execute all assigned construction projects. Essential Position Functions Manages job site safety, pre-task plan compliance, safety equipment on job sites, and safety equipment expenses on the job site. Manages high-risk activities requiring safety upper management involvement. Manages job site productivity goals. Manages crew productivity and daily quantity tracking. Assigns tasks and directs work to ensure project goals are met safely and efficiently. Assures individuals are meeting productivity goals. Manages project layout, trade coordination, project quality control. Oversees tool and rental expenses on projects. Manages daily reports on job sites being completed, documentation (RFIs, drawings updates, submittals) and, job site photo documentation. Manages documentation on all risk management issues. Note: The statements contained herein describe the essential functions of this position but should not be an all-inclusive listing of work requirements. Individuals may perform other duties as assigned including work in other areas to cover absences or relief to equalize peak work periods or otherwise balance the workload. Non-Essential Position Functions Other duties as assigned. Supervisory Responsibilities Directly supervises employees at the job site. Carries out supervisory responsibilities in accordance with Veregy's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Education and Qualifications To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or general education degree (GED); or fifteen years or more related experience and/or training; or equivalent combination of education and experience. Minimum of 15 years experience in the electrical trade required. 10 years or more of electrical commercial construction required. Must be competent in the use of NEC (National Electrical Code) book as reference material in performing or directing the performance of work required. Knowledge, Skills, and Abilities Knowledge of Veregy's services and processes is required which can be obtained through intellect, technical inclination, and dedication to gain such knowledge. Knowledge (Intermediate to advanced) of various operating systems, software products (e.g. MS Office, etc.), is required. Knowledge in all aspects of trade related materials, components, equipment, systems methods of installation, safety procedures, safe work practices, sizing and other calculations, use of hand and power tools. Knowledge in use of NEC (National Electrical Code) book as reference material in performing or directing the performance of work. Knowledge in the proper use of hand and power tools and operation of related equipment. Ability to read and accurately interpret project related drawings and documentation including plans, specifications, drawings, schematics, diagrams, sketches, and blueprints to ensure proper installation means and methods. Ability to work independently and efficiently manage time / workload. Ability to effectively respond to common inquiries or complaints from customers and staff. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to prioritize tasks and tactfully negotiate priority with end users. Ability to work under deadline pressure and extra hours if needed. Certificates, Licenses, Registrations Valid driver's license required. OSHA 30 Certification required. Benefits Competitive Compensation. Paid Holidays, Paid Sick Leave, and Paid Time Off. Competitive Medical, Dental and Vision Plans. 401k Retirement Plan with Matching Employer Contributions (%). Employer Sponsored Life Insurance and AD&D Insurance. Employer Paid Short- and Long-Term Disability Insurance. Continued Education and Trade Certification Sponsorship (Specific Positions). Company Branded Trucks Provided (Specific Positions). Applicants must be currently authorized to work in the United States on a full-time basis. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunity has been, and will continue to be, a fundamental principle at Veregy, where employment is based upon capabilities and qualifications without discrimination because of race, color, religion, sex, age, national origin, disability, veteran status, genetic history, sexual orientation, or any other protected characteristic as established by law.
Overview As a member of the interdisciplinary team, contributes professional nursing knowledge and skills in the provision and management of care to patients through the application of the nursing process. Qualifications Certifications: Basic Life Support (BLS) within 30 days - American Heart Association (AHA)American Heart Association (AHA)American Heart Association (AHA); Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR), Education: Bachelor's Degree; H.S. Diploma/GED, Work Experience: Responsibilities Assesses patient's status through interview, observation and physical assessment of actual problems and outcomes. Develops an individualized plan of care using a collaborative approach with the patient/family and health care team. Uses appropriate interventions identified in the plan of care to achieve expected patient outcomes. Systematically evaluates and documents patient's progress toward expected outcomes/goals on an ongoing basis throughout the shift. Modifies plan of care based on evaluation and as needed based on changes in patient condition. Completes required documentation as appropriate, including patient chart and event reports. Demonstrates professional accountability for own practice as evidenced through seeking resources and continued self-development. Demonstrates technical knowledge of equipment and troubleshoots when problems arise. Acquires and maintains current knowledge and skills in evidence based nursing practice. Promotes the professional development of self and team members Shares clinical knowledge through informal teaching and in response to the learning needs of others. Demonstrates a practical problem solving approach to patient moving and handling issues (as applicable). Demonstrates skills to promote patient and staff safety through appropriate use of lift equipment (as applicable). Possesses knowledge and skills necessary to obtain adequate lab specimens for testing. Performs patient bedside lab testing and associated quality control in compliance with medical provider's orders and hospital lab procedures/policies. Collaborates with the health care team in the organization of tasks and activities for the patient's care from admission to discharge according to the plan of care and to meet identified expected outcomes. Assesses and chooses teaching strategies appropriate to the patient's/family's age specific needs. Actively participates in data collection, analysis, and problem solving and gives input on process improvements and patient satisfaction. Assures that the care provided is consistent with standards of care, evidence based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospital About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $36.8per hour - $59.89per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
07/24/2026
Full time
Overview As a member of the interdisciplinary team, contributes professional nursing knowledge and skills in the provision and management of care to patients through the application of the nursing process. Qualifications Certifications: Basic Life Support (BLS) within 30 days - American Heart Association (AHA)American Heart Association (AHA)American Heart Association (AHA); Licensed Registered Professional Nurse (RN) - Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR)Illinois Department of Financial and Professional Regulation (IDFPR), Education: Bachelor's Degree; H.S. Diploma/GED, Work Experience: Responsibilities Assesses patient's status through interview, observation and physical assessment of actual problems and outcomes. Develops an individualized plan of care using a collaborative approach with the patient/family and health care team. Uses appropriate interventions identified in the plan of care to achieve expected patient outcomes. Systematically evaluates and documents patient's progress toward expected outcomes/goals on an ongoing basis throughout the shift. Modifies plan of care based on evaluation and as needed based on changes in patient condition. Completes required documentation as appropriate, including patient chart and event reports. Demonstrates professional accountability for own practice as evidenced through seeking resources and continued self-development. Demonstrates technical knowledge of equipment and troubleshoots when problems arise. Acquires and maintains current knowledge and skills in evidence based nursing practice. Promotes the professional development of self and team members Shares clinical knowledge through informal teaching and in response to the learning needs of others. Demonstrates a practical problem solving approach to patient moving and handling issues (as applicable). Demonstrates skills to promote patient and staff safety through appropriate use of lift equipment (as applicable). Possesses knowledge and skills necessary to obtain adequate lab specimens for testing. Performs patient bedside lab testing and associated quality control in compliance with medical provider's orders and hospital lab procedures/policies. Collaborates with the health care team in the organization of tasks and activities for the patient's care from admission to discharge according to the plan of care and to meet identified expected outcomes. Assesses and chooses teaching strategies appropriate to the patient's/family's age specific needs. Actively participates in data collection, analysis, and problem solving and gives input on process improvements and patient satisfaction. Assures that the care provided is consistent with standards of care, evidence based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospital About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $36.8per hour - $59.89per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
It's more than a career, it's a calling MO-SSM Health Saint Louis University Hospital 1201 Grand Worker Type: Regular Job Highlights: Join us because Together, We Care. Sign On Bonus: Up to $ 20,000 with 1 years' experience ($15,000 with less than 1 year), payable within 30 days of start date. Schedule: Full time, day shift! Pay Range: $35.81 - $53.72/hour & Daily Pay available! Shift Differentials: Available for night, weekend, & additional shifts Requirements: Completion of Sonography program and 2 or more ARDMS or CCI registries in Abdomen, OB/GYN, Breast, Echo, or Vascular. 100% tuition benefit for additional certifications for full-time employees! Tuition Reimbursement: 100% tuition benefit for additional certifications for full-time employees! Relocation assistance is available for those who qualify. Qualified external candidates only Job Summary: Performs diagnostic ultrasound imaging studies. Job Responsibilities and Requirements: POSITION ACCOUNTABILITIES AND PERFORMANCE CRITERIA (Percent of Time) Essential Functions: The following are essential job accountabilities and performance criteria: Position Accountabilities Performs ultrasound procedures and examinations according to established department guidelines. 60-75% Criteria A)Performs ultrasound procedures and examinations according to established department guidelines. B) Clearly communicates & explains the exam procedure to the patient and any family member present to insure understanding and patient's consent for explained test. C) Assesses patient's medical, cardiac or vascular status by taking a history before the exam. D) Assembles a chart with the patient's information and enters information into the current PACS System or Electronic Medical Record (EMR). E) Records all imaging studies (digital archive) for the Medical Director or his/her designee to review and interpret. 2) Completes patient billing to insure accurate and timely billing procedures. 5% Criteria Enters charges daily for procedures performed with no more than 1 error per week. Prints reports from PAC, Epic and On Demand. Checks each charge to ensure the right account number is used and the correct procedures are charged. 3) Supports all functions, goals and objectives of the department as well as development of any new programs. 5% Criteria A) Participate in development of new diagnostic testing procedures to be performed in the department. Participates in the evaluation of new equipment for potential purchase. B) Educates residents and other medical or technical staff in the technical aspects, indications and limitations. C) Enhances professional growth and development through annual participation in educational programs, in-services, workshops, reading current publications, on line CME through various professional organizations & manufacturers and viewing videotaped education programs. Complete required CEUs to maintain specialty certification. D) Participates in research studies that require services of the department. 4) Safety/Infection Control: Practices according to safety and infection control policies. 3-5% Criteria A) Practices universal precautions and disposes of hazardous wastes per established guidelines. Disinfects and cleans equipment according to manufacturers' guidelines and standards outlined by Infection Control and department policy, including high level disinfection (HLD). B) Maintains a safe, clean, comfortable and therapeutic environment for patients/families/employees in accordance with hospital standards. 1. Maintains clutter free environment. 2. Keeps conversations and background noise to a minimum Adheres to dress code. Properly displays ID badge worn with picture visible and above the waistline at all times. Maintains equipment in clean & proper working condition on a daily basis. Troubleshoots & corrects technical problems as needed. Contacts Clinical Engineering or manufacturer's service department (if under contract) when malfunctions occur. C) Reports risk management concerns. D) Assumes responsibility for completing all assigned annual hospital and department specific mandatory requirements. 1. Safety/Fire 2. Blood Borne Pathogens 3. Hazardous Communication 4. TB 5. Department Specific 6. Age Appropriate Care (for clinical staff only) E) Works in a constant state of alertness and safe manner. 5) Service: Provides service excellence to the customers of Saint Louis University Hospital by delivering timely, high quality care in a courteous and respectful manner. 2-5% Criteria A) Demonstrates Care and Courtesy to all patients, family members, hospital and medical staff. Demonstrate ability to relate to coworkers in a professional and respectful manner, in order to assure and promote a culture of safety B) Communicates Effectively and Maintains Confidentiality as outlined in the hospital policy. C) Demonstrates Competence and Collaboration as outlined in the hospital policy. D) Provides Cost Effective Services: Minimizes overtime by scheduling and performing patient procedures in the most efficient manner (flex time). Appropriately uses/handles equipment and orders supplies to minimize expenditures on repairs, replacement items and inventory. E) Attends regularly scheduled hospital and department meetings that support and explain the Mission of St. Louis University Hospital and its operation. 6) Performance Improvement (PI): Incorporates Quality Assessment into one's daily work. 2%-3% Criteria A) Assists in the daily collection of data for the department's Performance Improvement Program (volume indicators monthly & quality indicators are based upon department operation & requested monitoring by the procedure review committee). B) Wisely and responsibly utilize the resources within the facility. Take care of equipment and report problems to result in a longer usage life. C) Recommends changes in practices to increase efficiency and minimize waste to manager. 7) Age Appropriate Care: Provides age-appropriate care to: 1% _Infant _Child x Adolescent x Adult x Geriatric Criteria A) Demonstrates knowledge and skills of normal growth & development necessary to provide services to the age of the patient served by the department. B) Demonstrates ability to assess and interpret age specific data to identify patient needs. C) Utilizes communication skills necessary to interpret age specific responses to service and interaction. D) Involves family or significant other in decision making related to services provided. Demonstrates ability to provide service needed for the age groups routinely served by the department assigned. 8) Specialized Care: Provides specialized care to patients at high risk for injury. Restraint Care Initiates/evaluates alternatives to restraint prior to application. Applies restraints consistent with the approved procedure. Monitors and assesses patient's response throughout the restraint period at the appropriate intervals. Provides specified patient care (toileting, skin care, hydration, feeding, etc.) on a timely basis. Provides for trail release and removal of restraint as soon as possible. Adhere to hospital policy Restraints. Pain Management Follows pain management plan of care, e.g.: repositioning, message, immobilization, etc. Reports patient complaints of pain to the nursing staff and/or physician. Evaluates and addresses pain concerns in accordance with Pain Management Policy (see hospital policy on pain management). Abuse Assessment Is aware of abuse recognition criteria and incorporates it into assessments. Reports signs of possible abuse/neglect to the physician and Risk Management, and recommends appropriate consultations (psychiatric, Social Work) for evaluation. Adhere to hospital policy on Abuse and Neglect Clinical Assessment and Reporting. 9) Assists in the day-to-day operation of the assigned department. 1-3% Criteria A) Utilizes work order entry system to report functions which need to be performed by housekeeping, maintenance and clinical engineering. B) Retrieves previously archived studies for viewing/printing as requested. C) Assists in clerical duties as required, including telephone responsibilities, processing of reports, posting/mailing of reports, filing, scheduling, etc. D) Participates in preparing and performing regular safety and infection control surveys. Reports non-compliant issues to manager/administrator and if necessary, safety or infection control director, and takes steps to correct deficiencies. DISCLAIMER: Performs other related duties as assigned or requested. Rationale for Essential Functions The performance of this function is the reason the job exists. There are limited employees among whom the performance of this function can be distributed. This function occupies a great deal of the employee's time. This function is highly specialized. Employees are hired for the skill/ability to perform this function . click apply for full job details
07/24/2026
Full time
It's more than a career, it's a calling MO-SSM Health Saint Louis University Hospital 1201 Grand Worker Type: Regular Job Highlights: Join us because Together, We Care. Sign On Bonus: Up to $ 20,000 with 1 years' experience ($15,000 with less than 1 year), payable within 30 days of start date. Schedule: Full time, day shift! Pay Range: $35.81 - $53.72/hour & Daily Pay available! Shift Differentials: Available for night, weekend, & additional shifts Requirements: Completion of Sonography program and 2 or more ARDMS or CCI registries in Abdomen, OB/GYN, Breast, Echo, or Vascular. 100% tuition benefit for additional certifications for full-time employees! Tuition Reimbursement: 100% tuition benefit for additional certifications for full-time employees! Relocation assistance is available for those who qualify. Qualified external candidates only Job Summary: Performs diagnostic ultrasound imaging studies. Job Responsibilities and Requirements: POSITION ACCOUNTABILITIES AND PERFORMANCE CRITERIA (Percent of Time) Essential Functions: The following are essential job accountabilities and performance criteria: Position Accountabilities Performs ultrasound procedures and examinations according to established department guidelines. 60-75% Criteria A)Performs ultrasound procedures and examinations according to established department guidelines. B) Clearly communicates & explains the exam procedure to the patient and any family member present to insure understanding and patient's consent for explained test. C) Assesses patient's medical, cardiac or vascular status by taking a history before the exam. D) Assembles a chart with the patient's information and enters information into the current PACS System or Electronic Medical Record (EMR). E) Records all imaging studies (digital archive) for the Medical Director or his/her designee to review and interpret. 2) Completes patient billing to insure accurate and timely billing procedures. 5% Criteria Enters charges daily for procedures performed with no more than 1 error per week. Prints reports from PAC, Epic and On Demand. Checks each charge to ensure the right account number is used and the correct procedures are charged. 3) Supports all functions, goals and objectives of the department as well as development of any new programs. 5% Criteria A) Participate in development of new diagnostic testing procedures to be performed in the department. Participates in the evaluation of new equipment for potential purchase. B) Educates residents and other medical or technical staff in the technical aspects, indications and limitations. C) Enhances professional growth and development through annual participation in educational programs, in-services, workshops, reading current publications, on line CME through various professional organizations & manufacturers and viewing videotaped education programs. Complete required CEUs to maintain specialty certification. D) Participates in research studies that require services of the department. 4) Safety/Infection Control: Practices according to safety and infection control policies. 3-5% Criteria A) Practices universal precautions and disposes of hazardous wastes per established guidelines. Disinfects and cleans equipment according to manufacturers' guidelines and standards outlined by Infection Control and department policy, including high level disinfection (HLD). B) Maintains a safe, clean, comfortable and therapeutic environment for patients/families/employees in accordance with hospital standards. 1. Maintains clutter free environment. 2. Keeps conversations and background noise to a minimum Adheres to dress code. Properly displays ID badge worn with picture visible and above the waistline at all times. Maintains equipment in clean & proper working condition on a daily basis. Troubleshoots & corrects technical problems as needed. Contacts Clinical Engineering or manufacturer's service department (if under contract) when malfunctions occur. C) Reports risk management concerns. D) Assumes responsibility for completing all assigned annual hospital and department specific mandatory requirements. 1. Safety/Fire 2. Blood Borne Pathogens 3. Hazardous Communication 4. TB 5. Department Specific 6. Age Appropriate Care (for clinical staff only) E) Works in a constant state of alertness and safe manner. 5) Service: Provides service excellence to the customers of Saint Louis University Hospital by delivering timely, high quality care in a courteous and respectful manner. 2-5% Criteria A) Demonstrates Care and Courtesy to all patients, family members, hospital and medical staff. Demonstrate ability to relate to coworkers in a professional and respectful manner, in order to assure and promote a culture of safety B) Communicates Effectively and Maintains Confidentiality as outlined in the hospital policy. C) Demonstrates Competence and Collaboration as outlined in the hospital policy. D) Provides Cost Effective Services: Minimizes overtime by scheduling and performing patient procedures in the most efficient manner (flex time). Appropriately uses/handles equipment and orders supplies to minimize expenditures on repairs, replacement items and inventory. E) Attends regularly scheduled hospital and department meetings that support and explain the Mission of St. Louis University Hospital and its operation. 6) Performance Improvement (PI): Incorporates Quality Assessment into one's daily work. 2%-3% Criteria A) Assists in the daily collection of data for the department's Performance Improvement Program (volume indicators monthly & quality indicators are based upon department operation & requested monitoring by the procedure review committee). B) Wisely and responsibly utilize the resources within the facility. Take care of equipment and report problems to result in a longer usage life. C) Recommends changes in practices to increase efficiency and minimize waste to manager. 7) Age Appropriate Care: Provides age-appropriate care to: 1% _Infant _Child x Adolescent x Adult x Geriatric Criteria A) Demonstrates knowledge and skills of normal growth & development necessary to provide services to the age of the patient served by the department. B) Demonstrates ability to assess and interpret age specific data to identify patient needs. C) Utilizes communication skills necessary to interpret age specific responses to service and interaction. D) Involves family or significant other in decision making related to services provided. Demonstrates ability to provide service needed for the age groups routinely served by the department assigned. 8) Specialized Care: Provides specialized care to patients at high risk for injury. Restraint Care Initiates/evaluates alternatives to restraint prior to application. Applies restraints consistent with the approved procedure. Monitors and assesses patient's response throughout the restraint period at the appropriate intervals. Provides specified patient care (toileting, skin care, hydration, feeding, etc.) on a timely basis. Provides for trail release and removal of restraint as soon as possible. Adhere to hospital policy Restraints. Pain Management Follows pain management plan of care, e.g.: repositioning, message, immobilization, etc. Reports patient complaints of pain to the nursing staff and/or physician. Evaluates and addresses pain concerns in accordance with Pain Management Policy (see hospital policy on pain management). Abuse Assessment Is aware of abuse recognition criteria and incorporates it into assessments. Reports signs of possible abuse/neglect to the physician and Risk Management, and recommends appropriate consultations (psychiatric, Social Work) for evaluation. Adhere to hospital policy on Abuse and Neglect Clinical Assessment and Reporting. 9) Assists in the day-to-day operation of the assigned department. 1-3% Criteria A) Utilizes work order entry system to report functions which need to be performed by housekeeping, maintenance and clinical engineering. B) Retrieves previously archived studies for viewing/printing as requested. C) Assists in clerical duties as required, including telephone responsibilities, processing of reports, posting/mailing of reports, filing, scheduling, etc. D) Participates in preparing and performing regular safety and infection control surveys. Reports non-compliant issues to manager/administrator and if necessary, safety or infection control director, and takes steps to correct deficiencies. DISCLAIMER: Performs other related duties as assigned or requested. Rationale for Essential Functions The performance of this function is the reason the job exists. There are limited employees among whom the performance of this function can be distributed. This function occupies a great deal of the employee's time. This function is highly specialized. Employees are hired for the skill/ability to perform this function . click apply for full job details
Job Description Job Description Line Operator $17 Monday - Friday 7am-3:30p What Matters Most Competitive Pay of $17 an hour Schedule: Monday - Friday 7am-3:30pm Location: Avon, OH Temporary-to-hire opportunity with career growth and stability Weekly Pay with direct deposit or pay card When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus program Job Description This position is an active on-the-floor support position which could entail standing for long periods of time. While performing the job duties, the employee is regularly required to work with hands repetitively (grabbing, handling, picking, packing, processing, etc.). Responsibilities: Checks inventory control of products and supplies to the line (labels, lids, boxes, etc.) and notifies Supervisor. Ensure correct labeling is properly affixed Accurately measure out product, load into appropriate container, properly seal, and ensure conformance to requirements Utilize accessory equipment such as pumps, totes, and conveyors to move materials through production processes Inspects and reports the condition of machinery for items needing repair or service Works on production and packaging lines in various capacities according to specifications Qualifications and Requirements: High school or equivalent (Preferred) Must be able to read and understand written and verbal instructions Must be able to perform basic math calculations related to the position Legibly and accurately record production performance data in a timely fashion Minimum three years of manufacturing experience Basic computer skills (including use of Microsoft Office) Must be able to pass pre-employment drug screen & background check Benefits and Perks: $17 an hour Medical, Dental, Vision & 401K Referral bonuses Weekly pay Your New Organization: Our client is a global leader in the development of protective coatings for high-performance applications. Their products are used in a variety of industries, including: Marine, Road and rail transportation, Tank containers, Chemical processing, petroleum, and refining, Tank storage and terminals, Food and beverage and Power generation. Your Career Partner: The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment. In the spirit of pay transparency, we want to share the base salary range for this position is $17 an hour, not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical in order to allow for future & continued salary growth. Company Description The Reserves Network is more than a staffing agency-we're a career partner. With a strong reputation for placing top talent across eight key specialties- Industrial & Manufacturing, Office & Professional, Accounting & Finance, Healthcare, Engineering, Executive & Management, Real Estate, and Information Technology-we prioritize your professional growth and job satisfaction. We offer personalized career guidance, access to exclusive job opportunities, and a supportive team dedicated to helping you reach your career goals. When you join The Reserves Network, you're not just filling a position; you're building a career with a company that values your skills and aspirations. Company Description The Reserves Network is more than a staffing agency-we're a career partner. With a strong reputation for placing top talent across eight key specialties- Industrial & Manufacturing, Office & Professional, Accounting & Finance, Healthcare, Engineering, Executive & Management, Real Estate, and Information Technology-we prioritize your professional growth and job satisfaction. We offer personalized career guidance, access to exclusive job opportunities, and a supportive team dedicated to helping you reach your career goals. When you join The Reserves Network, you're not just filling a position; you're building a career with a company that values your skills and aspirations.
07/24/2026
Full time
Job Description Job Description Line Operator $17 Monday - Friday 7am-3:30p What Matters Most Competitive Pay of $17 an hour Schedule: Monday - Friday 7am-3:30pm Location: Avon, OH Temporary-to-hire opportunity with career growth and stability Weekly Pay with direct deposit or pay card When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus program Job Description This position is an active on-the-floor support position which could entail standing for long periods of time. While performing the job duties, the employee is regularly required to work with hands repetitively (grabbing, handling, picking, packing, processing, etc.). Responsibilities: Checks inventory control of products and supplies to the line (labels, lids, boxes, etc.) and notifies Supervisor. Ensure correct labeling is properly affixed Accurately measure out product, load into appropriate container, properly seal, and ensure conformance to requirements Utilize accessory equipment such as pumps, totes, and conveyors to move materials through production processes Inspects and reports the condition of machinery for items needing repair or service Works on production and packaging lines in various capacities according to specifications Qualifications and Requirements: High school or equivalent (Preferred) Must be able to read and understand written and verbal instructions Must be able to perform basic math calculations related to the position Legibly and accurately record production performance data in a timely fashion Minimum three years of manufacturing experience Basic computer skills (including use of Microsoft Office) Must be able to pass pre-employment drug screen & background check Benefits and Perks: $17 an hour Medical, Dental, Vision & 401K Referral bonuses Weekly pay Your New Organization: Our client is a global leader in the development of protective coatings for high-performance applications. Their products are used in a variety of industries, including: Marine, Road and rail transportation, Tank containers, Chemical processing, petroleum, and refining, Tank storage and terminals, Food and beverage and Power generation. Your Career Partner: The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment. In the spirit of pay transparency, we want to share the base salary range for this position is $17 an hour, not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical in order to allow for future & continued salary growth. Company Description The Reserves Network is more than a staffing agency-we're a career partner. With a strong reputation for placing top talent across eight key specialties- Industrial & Manufacturing, Office & Professional, Accounting & Finance, Healthcare, Engineering, Executive & Management, Real Estate, and Information Technology-we prioritize your professional growth and job satisfaction. We offer personalized career guidance, access to exclusive job opportunities, and a supportive team dedicated to helping you reach your career goals. When you join The Reserves Network, you're not just filling a position; you're building a career with a company that values your skills and aspirations. Company Description The Reserves Network is more than a staffing agency-we're a career partner. With a strong reputation for placing top talent across eight key specialties- Industrial & Manufacturing, Office & Professional, Accounting & Finance, Healthcare, Engineering, Executive & Management, Real Estate, and Information Technology-we prioritize your professional growth and job satisfaction. We offer personalized career guidance, access to exclusive job opportunities, and a supportive team dedicated to helping you reach your career goals. When you join The Reserves Network, you're not just filling a position; you're building a career with a company that values your skills and aspirations.
Job Description Job Description Are you an experienced Electrical Construction Estimator seeking a new role with a successful company? Do you have experience working on Data Centers? Location: Carson City, NV Travel: Up to 50% within 50-mile radius Employment Type: Full-Time Salary Range: $85,000 - $140,000 (based on candidate's experience and qualifications) Position Overview The Estimator is responsible for estimating work as scheduled by Senior and Lead Estimators for bid. This position prepares cost estimates for electrical projects, supports contract proposal development, and collaborates with internal and external stakeholders to ensure accurate and competitive bids. Key Responsibilities Prepare cost estimates for electrical projects from design conception through basic design Bid projects with sufficient detail to produce accurate budgets and purchase orders Determine scope of work and review design options Communicate with clients, vendors, engineers, architects, building officials, owners, contractors, and subcontractors Assist in preparing portions of contract proposal estimates Work with the estimating team regarding bid document requirements Price field change orders as needed Attend staff and scheduled business meetings and support team needs as required Qualifications Ability to perform all essential job functions successfully Excellent verbal and written communication skills Strong organizational skills and attention to detail Strong analytical and problem-solving abilities Proficiency in Microsoft Office Suite / Office 365 Ability to read plans and specifications Experience with Accubid Anywhere/Classic or similar estimating software Education & Experience Bachelor's degree in Electrical Engineering, trade school education, or equivalent experience (preferred but not required) Electrical field construction experience Physical Requirements & Work Environment Prolonged periods of sitting at a desk and working on a computer Must be able to lift up to 15 pounds at times Regularly ascend or descend stairs or ramps when other means of movement are not available Ability to travel to job site locations Ability to work in extreme weather and temperature conditions Must be able to climb ladders Ability to stand or walk for extended periods of time Ability to perform physical activities including standing, sitting, stooping, squatting, bending, kneeling, twisting, crawling, reaching, lifting, balancing, carrying, pushing, and pulling as required for light office and field duties Exposure to both office environments and job site conditions Compensation & Benefits Competitive salary: $85,000-$140,000 (based on market benchmarks, internal equity, and the candidate's experience and qualifications) 401(k) with company match Medical, dental, and vision insurance Paid time off and holidays Benefits: 401(k) 401(k) matching Health insurance Paid time off About Capital Staffing Inc: Established in 2011, Capital Staffing, Inc is committed to providing a high level of support to all of our employees. We appreciate your choice in partnering with us for your future employment! Capital Staffing employs a wide range of highly skilled administrative/customer service, accounting/finance, industrial, healthcare, scientific, manufacturing and IT professionals across various industries. Capital Staffing, Inc provides contract, contract to hire, and direct placement recruiting services. We are proud to serve our local community!
07/24/2026
Full time
Job Description Job Description Are you an experienced Electrical Construction Estimator seeking a new role with a successful company? Do you have experience working on Data Centers? Location: Carson City, NV Travel: Up to 50% within 50-mile radius Employment Type: Full-Time Salary Range: $85,000 - $140,000 (based on candidate's experience and qualifications) Position Overview The Estimator is responsible for estimating work as scheduled by Senior and Lead Estimators for bid. This position prepares cost estimates for electrical projects, supports contract proposal development, and collaborates with internal and external stakeholders to ensure accurate and competitive bids. Key Responsibilities Prepare cost estimates for electrical projects from design conception through basic design Bid projects with sufficient detail to produce accurate budgets and purchase orders Determine scope of work and review design options Communicate with clients, vendors, engineers, architects, building officials, owners, contractors, and subcontractors Assist in preparing portions of contract proposal estimates Work with the estimating team regarding bid document requirements Price field change orders as needed Attend staff and scheduled business meetings and support team needs as required Qualifications Ability to perform all essential job functions successfully Excellent verbal and written communication skills Strong organizational skills and attention to detail Strong analytical and problem-solving abilities Proficiency in Microsoft Office Suite / Office 365 Ability to read plans and specifications Experience with Accubid Anywhere/Classic or similar estimating software Education & Experience Bachelor's degree in Electrical Engineering, trade school education, or equivalent experience (preferred but not required) Electrical field construction experience Physical Requirements & Work Environment Prolonged periods of sitting at a desk and working on a computer Must be able to lift up to 15 pounds at times Regularly ascend or descend stairs or ramps when other means of movement are not available Ability to travel to job site locations Ability to work in extreme weather and temperature conditions Must be able to climb ladders Ability to stand or walk for extended periods of time Ability to perform physical activities including standing, sitting, stooping, squatting, bending, kneeling, twisting, crawling, reaching, lifting, balancing, carrying, pushing, and pulling as required for light office and field duties Exposure to both office environments and job site conditions Compensation & Benefits Competitive salary: $85,000-$140,000 (based on market benchmarks, internal equity, and the candidate's experience and qualifications) 401(k) with company match Medical, dental, and vision insurance Paid time off and holidays Benefits: 401(k) 401(k) matching Health insurance Paid time off About Capital Staffing Inc: Established in 2011, Capital Staffing, Inc is committed to providing a high level of support to all of our employees. We appreciate your choice in partnering with us for your future employment! Capital Staffing employs a wide range of highly skilled administrative/customer service, accounting/finance, industrial, healthcare, scientific, manufacturing and IT professionals across various industries. Capital Staffing, Inc provides contract, contract to hire, and direct placement recruiting services. We are proud to serve our local community!
Description: Professional Transportation Engineer - Lead Location: Salt Lake City or Logan, Utah Position Overview : J-U-B ENGINEERS, Inc. is seeking to hire a Professional Engineer - Lead, to work in our either our successful Salt Lake City or Logan, Utah office. Our purpose at J-U-B ENGINEERS, Inc. (J-U-B) is "Helping Each Other Create Better Communities." We foster a supportive and team-oriented environment to solve problems that improve society, while providing employees growth opportunities and an expansive benefits package. We attract and retain the best people because we provide an enriching environment for our employees to build their careers in the communities where they live. J-U-B offers a clearly defined career path, a sense of belonging, and opportunities for employees to use their talents in a team environment. We are one of the largest professional engineering companies in the Intermountain West, with over 20 offices across seven states. There are ample opportunities to collaborate with other offices on projects, widening your experience and network. This position is part of the J-U-B Transportation Services Group (TSG) which consists of over 80 full-time staff focused on surface transportation projects in Utah, Idaho, Colorado, Washington, Nevada, Oregon and Wyoming. The TSG is currently managing over 200 active projects, many of which include a variety of local roadways, highways, intersections, interchanges, roundabouts, and active transportation. While applying technical civil engineering knowledge and skills, this engineering position will: Work with multidisciplinary design teams in the planning, design, construction, and permitting of a wide variety of transportation projects throughout the company, primarily for transportation projects for local agencies and State DOT's, including projects with both local and federal aid funds. Collaborate with traffic engineers, structural engineers, and other specialty disciplines to deliver a comprehensive package of reports, studies, and drawings to our clients. Operate CAD (MicroStation/OpenRoads) to effectively produce alignments, models, and plans of transportation projects using current standards. Work in a team setting, reporting to and taking direction from a Project Manager or Senior Project Engineer. Analyze engineering data and utilize sound engineering judgement to produce final engineering documents including project plans, opinions of probable construction cost, construction drawings, technical specifications, studies, feasibility analyses, technical memoranda, and preliminary engineering reports. Mentor younger/junior staff such as EIT's, drafters, and designers. Assist in business development by building relationships with clients and assisting with the preparation of proposals. Support the Project Manager in preparing and executing scopes of work, contracts, and design budgets for projects. Attend client meetings and participate in public meetings or open houses to discuss project details and inform the public. Coordinate with utility companies. Perform periodic fieldwork including construction observation and project reconnaissance. Supervise support staff assigned to projects including drafters, EIT's, surveyors, and construction observers. Manage clients and client projects while providing responsive communications, professional services, and delivering quality projects to multiple clients. Requirements: Bachelor's degree (B.S.) in Civil Engineering. Licensed Professional Engineer (P.E.), preferably in Utah or able to obtain licensure within 90 days of hire. 5-15 years of transportation engineering experience. Able to take small to medium size projects from design start to advertisement. Excellent communication skills and a focus on quality deliverables. Ability to work collaboratively in a team environment. Proven technical background and skillset. History of working on projects with the Utah Department of Transportation (UDOT) is a plus. Salary Range: $110,000 to $150,000 per year, determined by experience. Benefits: In addition to your competitive salary, J-U-B also offers an extensive benefits package including: Professional development opportunities Bonuses for qualified employees Generous vacation and sick leave package Medical, dental, vision, life, and disability insurance Parental Leave 401(k) with company match, profit sharing Company paid Short Term and Long-Term Disability plans The ability to work in a team-centered, collaborative, and supportive atmosphere J-U-B is an employee-owned firm and offers ownership opportunities after qualified years of service The application window will be open through July 14, 2026. Applications will be reviewed frequently, and interviews may be scheduled throughout the posting period. See our website for more benefit details: To apply for this position and learn more about J-U-B, please visit Compensation details: 00 Yearly Salary PI01d99b0a8a1c-2160
07/24/2026
Full time
Description: Professional Transportation Engineer - Lead Location: Salt Lake City or Logan, Utah Position Overview : J-U-B ENGINEERS, Inc. is seeking to hire a Professional Engineer - Lead, to work in our either our successful Salt Lake City or Logan, Utah office. Our purpose at J-U-B ENGINEERS, Inc. (J-U-B) is "Helping Each Other Create Better Communities." We foster a supportive and team-oriented environment to solve problems that improve society, while providing employees growth opportunities and an expansive benefits package. We attract and retain the best people because we provide an enriching environment for our employees to build their careers in the communities where they live. J-U-B offers a clearly defined career path, a sense of belonging, and opportunities for employees to use their talents in a team environment. We are one of the largest professional engineering companies in the Intermountain West, with over 20 offices across seven states. There are ample opportunities to collaborate with other offices on projects, widening your experience and network. This position is part of the J-U-B Transportation Services Group (TSG) which consists of over 80 full-time staff focused on surface transportation projects in Utah, Idaho, Colorado, Washington, Nevada, Oregon and Wyoming. The TSG is currently managing over 200 active projects, many of which include a variety of local roadways, highways, intersections, interchanges, roundabouts, and active transportation. While applying technical civil engineering knowledge and skills, this engineering position will: Work with multidisciplinary design teams in the planning, design, construction, and permitting of a wide variety of transportation projects throughout the company, primarily for transportation projects for local agencies and State DOT's, including projects with both local and federal aid funds. Collaborate with traffic engineers, structural engineers, and other specialty disciplines to deliver a comprehensive package of reports, studies, and drawings to our clients. Operate CAD (MicroStation/OpenRoads) to effectively produce alignments, models, and plans of transportation projects using current standards. Work in a team setting, reporting to and taking direction from a Project Manager or Senior Project Engineer. Analyze engineering data and utilize sound engineering judgement to produce final engineering documents including project plans, opinions of probable construction cost, construction drawings, technical specifications, studies, feasibility analyses, technical memoranda, and preliminary engineering reports. Mentor younger/junior staff such as EIT's, drafters, and designers. Assist in business development by building relationships with clients and assisting with the preparation of proposals. Support the Project Manager in preparing and executing scopes of work, contracts, and design budgets for projects. Attend client meetings and participate in public meetings or open houses to discuss project details and inform the public. Coordinate with utility companies. Perform periodic fieldwork including construction observation and project reconnaissance. Supervise support staff assigned to projects including drafters, EIT's, surveyors, and construction observers. Manage clients and client projects while providing responsive communications, professional services, and delivering quality projects to multiple clients. Requirements: Bachelor's degree (B.S.) in Civil Engineering. Licensed Professional Engineer (P.E.), preferably in Utah or able to obtain licensure within 90 days of hire. 5-15 years of transportation engineering experience. Able to take small to medium size projects from design start to advertisement. Excellent communication skills and a focus on quality deliverables. Ability to work collaboratively in a team environment. Proven technical background and skillset. History of working on projects with the Utah Department of Transportation (UDOT) is a plus. Salary Range: $110,000 to $150,000 per year, determined by experience. Benefits: In addition to your competitive salary, J-U-B also offers an extensive benefits package including: Professional development opportunities Bonuses for qualified employees Generous vacation and sick leave package Medical, dental, vision, life, and disability insurance Parental Leave 401(k) with company match, profit sharing Company paid Short Term and Long-Term Disability plans The ability to work in a team-centered, collaborative, and supportive atmosphere J-U-B is an employee-owned firm and offers ownership opportunities after qualified years of service The application window will be open through July 14, 2026. Applications will be reviewed frequently, and interviews may be scheduled throughout the posting period. See our website for more benefit details: To apply for this position and learn more about J-U-B, please visit Compensation details: 00 Yearly Salary PI01d99b0a8a1c-2160
Overview Cath Lab exclusive $10,000 Sign-on Bonus Relocation bonus available for 1yr+ experience and >50mi To assist the Cardiologists in performing invasive and diagnostic/interventional cardiac/vascular and electrophysiologic procedures; as well as technical hemodynamic monitoring and interpretation using automated techniques. Providing care to meet patient needs and handle other duties as required and assigned. Qualifications License/Certifications: Basic Life Support (BLS) Provider - American Heart Association (AHA); Licensed Radiologic Technologist - Radiography - Illinois Emergency Management Agency (IEMA); Advanced Cardiac Life Support (ACLS) within 1 year - American Heart Association (AHA); Registered in Radiography (R) - American Registry of Radiologic Technologists (ARRT) Education: Certificate of Completion: Radiologic Technology (Required) Other Knowledge/Skills: Responsibilities To assist cardiologists in performing invasive coronary/vascular/EP diagnostic and/or therapeutic procedures using a specific technique. To set up and operate a variety of electrical/imaging equipment and computers. Knowledge of hemodynamic concepts, cardiac anatomy and physiology, and the purpose and operation of equipment and supplies inherent in cardiac/vascular diagnostic and interventional procedures Knowledge and competency in moderate sedation administration and policy protocol Knowledge of EP concepts, theory, and the fluoroscopic anatomy and physiology involved in diagnostic and interventional EP procedures Displays good judgement and problem-solving skills Displays ability to organize and prioritize performance based on procedural findings Ability to recognize and assist in treatment of any complication arising from cardiac/vascular/EP diagnostic and interventional procedures Advocates for patient's needs Ability to set up sterile table with appropriate supplies specific to each procedure performed within the area Knowledge of correct preparation and draping of patients Extensive knowledge of use and function of supplies specific to cardiac/vascular diagnostic and interventional procedures Knowledge and ability to properly connect to appropriate physiologic monitoring equipment Knowledge of radiation safety and appropriate use and function of imaging equipment Advanced knowledge of EKG interpretation and arrhythmia recognition, analysis, and interpretation Hemodynamic and procedural results/outcome interpretation Selection and operation of procedural supplies/equipment based on procedural findings Knowledge of data analysis and interpretation specific to device implantation and function Operation of both monophasic and biphasic defibrillators Ability to effectively communicate and educate patient during procedures to alleviate anxiety and ensure focused patient care Ability to recognize and assist any anesthesia needs inherent in the care of the deeply sedated or anesthetized patient Collaborate with Research RN/Coordinator in carrying out laboratory-based research Excellence in communication skills and professional interaction enable incumbent to interact with physicians so that patient safety, satisfaction and optimal patient outcomes are facilitated during procedures Collaborates with team members and other health care providers in planning patient care specific to procedures being performed; assumes accountability for patient care by directing team members, if necessary, so that a standard of excellence and optimal patient outcomes can be achieved Excellence in communication skills enable incumbent to effectively train and mentor team members Appropriate, professional interaction with various vendors to ensure patient safety and positive outcomes resulting from product and/or equipment/supply use Updates knowledge and skills as equipment changes are implemented within the area Checks and evaluates equipment to ensure adequate performance and general safety on a daily basis Manages digital archiving system ensuring safe storage of patient images and reports Promptly notifies appropriate personnel and removes any malfunctioning equipment Promptly reports any equipment or supply malfunction or defective status so that proactive steps may be taken to ensure patient safety Demonstration of knowledge and ability to trouble-shoot and/or problem-solve any equipment within the area Demonstrate the ability to query archived images from deep archive storage, as well as create CD's to facilitate transmission of patient information Knowledge and recognition of Invasive Cardiology routinesProvides care to the patient undergoing coronary invasive procedures in the Cath Lab through the use of guidelines, policies, procedures, and standards of care. To report significant observations and reactions to appropriate personnel and document care provided. To maintain a working knowledge of aseptic technique Proficient in set-up of all procedures Assist in passing sterile guidewires, catheters, and other devices as required, using aseptic technique Prepare instruments for sterilization Suggest equipment of procedural changes required for the quality care of the patient Aseptic technique Proficient in preparing sterile field Understands requirements for maintaining aseptic technique Observes for deviation from proper aseptic technique by others then has it corrected Report significant observations to appropriate personnel and document observations and care provided. Accurate interpretation of EKG and alerts physician of any irregular activity. Accurate documentation of the procedure, in regards to catheter used, patient care, and response, medication given by the nurse, and complications during the procedure. Ability to assist in selecting catheters that will permit the Cardiologists in obtaining a complete diagnosis. Record, interpret, and calculate variousActively participates in data collection, analysis, problem solving and gives input on process improvements and patient satisfaction. Actively engages and attends educational opportunities to achieve continuing education specific to cardiac/vascular disease process and physiology. Achieve continuing education points to maintain active licensure. Assures that the care provided is consistent with standards of care, evidence based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospital Works with interdisciplinary team in identifying opportunities for improvement in patient care and patient/family satisfaction Actively promotes and achieves customer satisfaction (patient, family, departments, physicians) Participates in the implementation of Performance Improvement initiatives Promptly and efficiently follows up on patient/family requests/needs - anticipates patient/family needs Encourages coworkers in achieving excellent customer satisfaction; utilizes organizational service excellence standards Serves on unit based councils Identifies practice problems on the unit Implements changes in own clinical practice based on literature and unit process improvement outcomes Works on assigned projects, data collection, audits as assigned Follow-up and/or feedback to management with problem solving and incident reports. Continuing education such as seminars and college classes Participation in department decision making by providing input on new products and policy changes. Attend departmental education and/or staff meetings Willingly shares knowledge and guides new orientees Perform daily QI checks on the equipment.Assigns/completes charging/coding worksheet on each patient undergoing procedures within the area in an accurate and timely manner to ensure correct billing, optimal revenue reimbursement, and productivity statistics based on procedural charges. Selects/identifies appropriate charge sheet/charge codes depending on the procedure/procedures performed on the individual patient Completes charge sheet with correct charges/codes to facilitate accurate coding based on the procedures performed/completed Validates correct charges/codes with clinical cardiac coder to ensure accuracy when questions/issues arise Attends yearly education to ensure competency and concurrent knowledge as CPT codes are modified/updated on an annual basis in all areas (cardiology, radiology and endovascular) Maintains a charge/code error or missed charge rate of less than 3% of total charges on a monthly and annual basis About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. . click apply for full job details
07/24/2026
Full time
Overview Cath Lab exclusive $10,000 Sign-on Bonus Relocation bonus available for 1yr+ experience and >50mi To assist the Cardiologists in performing invasive and diagnostic/interventional cardiac/vascular and electrophysiologic procedures; as well as technical hemodynamic monitoring and interpretation using automated techniques. Providing care to meet patient needs and handle other duties as required and assigned. Qualifications License/Certifications: Basic Life Support (BLS) Provider - American Heart Association (AHA); Licensed Radiologic Technologist - Radiography - Illinois Emergency Management Agency (IEMA); Advanced Cardiac Life Support (ACLS) within 1 year - American Heart Association (AHA); Registered in Radiography (R) - American Registry of Radiologic Technologists (ARRT) Education: Certificate of Completion: Radiologic Technology (Required) Other Knowledge/Skills: Responsibilities To assist cardiologists in performing invasive coronary/vascular/EP diagnostic and/or therapeutic procedures using a specific technique. To set up and operate a variety of electrical/imaging equipment and computers. Knowledge of hemodynamic concepts, cardiac anatomy and physiology, and the purpose and operation of equipment and supplies inherent in cardiac/vascular diagnostic and interventional procedures Knowledge and competency in moderate sedation administration and policy protocol Knowledge of EP concepts, theory, and the fluoroscopic anatomy and physiology involved in diagnostic and interventional EP procedures Displays good judgement and problem-solving skills Displays ability to organize and prioritize performance based on procedural findings Ability to recognize and assist in treatment of any complication arising from cardiac/vascular/EP diagnostic and interventional procedures Advocates for patient's needs Ability to set up sterile table with appropriate supplies specific to each procedure performed within the area Knowledge of correct preparation and draping of patients Extensive knowledge of use and function of supplies specific to cardiac/vascular diagnostic and interventional procedures Knowledge and ability to properly connect to appropriate physiologic monitoring equipment Knowledge of radiation safety and appropriate use and function of imaging equipment Advanced knowledge of EKG interpretation and arrhythmia recognition, analysis, and interpretation Hemodynamic and procedural results/outcome interpretation Selection and operation of procedural supplies/equipment based on procedural findings Knowledge of data analysis and interpretation specific to device implantation and function Operation of both monophasic and biphasic defibrillators Ability to effectively communicate and educate patient during procedures to alleviate anxiety and ensure focused patient care Ability to recognize and assist any anesthesia needs inherent in the care of the deeply sedated or anesthetized patient Collaborate with Research RN/Coordinator in carrying out laboratory-based research Excellence in communication skills and professional interaction enable incumbent to interact with physicians so that patient safety, satisfaction and optimal patient outcomes are facilitated during procedures Collaborates with team members and other health care providers in planning patient care specific to procedures being performed; assumes accountability for patient care by directing team members, if necessary, so that a standard of excellence and optimal patient outcomes can be achieved Excellence in communication skills enable incumbent to effectively train and mentor team members Appropriate, professional interaction with various vendors to ensure patient safety and positive outcomes resulting from product and/or equipment/supply use Updates knowledge and skills as equipment changes are implemented within the area Checks and evaluates equipment to ensure adequate performance and general safety on a daily basis Manages digital archiving system ensuring safe storage of patient images and reports Promptly notifies appropriate personnel and removes any malfunctioning equipment Promptly reports any equipment or supply malfunction or defective status so that proactive steps may be taken to ensure patient safety Demonstration of knowledge and ability to trouble-shoot and/or problem-solve any equipment within the area Demonstrate the ability to query archived images from deep archive storage, as well as create CD's to facilitate transmission of patient information Knowledge and recognition of Invasive Cardiology routinesProvides care to the patient undergoing coronary invasive procedures in the Cath Lab through the use of guidelines, policies, procedures, and standards of care. To report significant observations and reactions to appropriate personnel and document care provided. To maintain a working knowledge of aseptic technique Proficient in set-up of all procedures Assist in passing sterile guidewires, catheters, and other devices as required, using aseptic technique Prepare instruments for sterilization Suggest equipment of procedural changes required for the quality care of the patient Aseptic technique Proficient in preparing sterile field Understands requirements for maintaining aseptic technique Observes for deviation from proper aseptic technique by others then has it corrected Report significant observations to appropriate personnel and document observations and care provided. Accurate interpretation of EKG and alerts physician of any irregular activity. Accurate documentation of the procedure, in regards to catheter used, patient care, and response, medication given by the nurse, and complications during the procedure. Ability to assist in selecting catheters that will permit the Cardiologists in obtaining a complete diagnosis. Record, interpret, and calculate variousActively participates in data collection, analysis, problem solving and gives input on process improvements and patient satisfaction. Actively engages and attends educational opportunities to achieve continuing education specific to cardiac/vascular disease process and physiology. Achieve continuing education points to maintain active licensure. Assures that the care provided is consistent with standards of care, evidence based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospital Works with interdisciplinary team in identifying opportunities for improvement in patient care and patient/family satisfaction Actively promotes and achieves customer satisfaction (patient, family, departments, physicians) Participates in the implementation of Performance Improvement initiatives Promptly and efficiently follows up on patient/family requests/needs - anticipates patient/family needs Encourages coworkers in achieving excellent customer satisfaction; utilizes organizational service excellence standards Serves on unit based councils Identifies practice problems on the unit Implements changes in own clinical practice based on literature and unit process improvement outcomes Works on assigned projects, data collection, audits as assigned Follow-up and/or feedback to management with problem solving and incident reports. Continuing education such as seminars and college classes Participation in department decision making by providing input on new products and policy changes. Attend departmental education and/or staff meetings Willingly shares knowledge and guides new orientees Perform daily QI checks on the equipment.Assigns/completes charging/coding worksheet on each patient undergoing procedures within the area in an accurate and timely manner to ensure correct billing, optimal revenue reimbursement, and productivity statistics based on procedural charges. Selects/identifies appropriate charge sheet/charge codes depending on the procedure/procedures performed on the individual patient Completes charge sheet with correct charges/codes to facilitate accurate coding based on the procedures performed/completed Validates correct charges/codes with clinical cardiac coder to ensure accuracy when questions/issues arise Attends yearly education to ensure competency and concurrent knowledge as CPT codes are modified/updated on an annual basis in all areas (cardiology, radiology and endovascular) Maintains a charge/code error or missed charge rate of less than 3% of total charges on a monthly and annual basis About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. . click apply for full job details
Overview The Clinical Dietitian is responsible for the nutrition screening, assessment, monitoring, evaluation, and education of MMCI patients through an integrated approach to nutrition care. Join a team where no two days look the same. We're seeking a motivated and compassionate Registered Dietitian to support both our Family Practice and Digestive Health clinics. If you thrive in a dynamic environment and enjoy working with a wide variety of patient needs, this role offers the perfect blend of collaboration, autonomy, and clinical diversity. In this unique split role, you'll work with patients across two service lines, providing a broad and rewarding mix of clinical experiences. A significant portion of your time will focus on weight management, helping patients create sustainable lifestyle changes to meet their health goals. You will: Provide individualized nutrition counseling to patients in Family Practice and Digestive Health settings. Support and guide patients through weight management, including medical weight loss programs. Collaborate closely with providers to create nutrition plans that align with patient diagnoses and care plans. Educate patients on topics such as healthy eating patterns, digestive health, chronic disease prevention, and behavior modification. Build strong, ongoing relationships with patients to help them make meaningful and lasting change. Participate in program development and continuous improvement initiatives. What Makes This Role Exciting: Variety that keeps you engaged: Alternate between Family Practice and Digestive Health, offering rich clinical exposure. A strong focus on patient impact: Play a key role in helping patients navigate their weight management journey. Room to grow: Opportunities for professional development, program involvement, and expansion of specialty skills. A supportive, collaborative culture: Work alongside a multi disciplinary team committed to exceptional patient care. This position (Registered Dietitians only) qualifies for a $5,000 sign-on bonus Qualifications Educational Requirements Education Level Field of Study Bachelor's Degree Dietetics Or Bachelor's Degree Related Field Licensure/Certification Requirements Licenses/Certifications Licensed Dietitian Nutritionist - Illinois Department of Financial and Professional Regulation (IDFPR) And Registered Dietitian (RD) - Commission on Dietetic Registration (CDR) Experience Requirement Work Experience Length of Experience Healthcare 1+ years Specialized Knowledge and Skills Requirements Required English Skills Basic reading skills Basic writing skills Basic oral skills Communication Skills Ability to respond appropriately to customer/co-worker Interaction with a wide variety of people Maintain confidential information Ability to communicate only the facts to recipients or to decline to reveal information Ability to project a professional, friendly, helpful demeanor Computer Skills Intermediate computer knowledge: Ability to troubleshoot minor problems within a Windows OS, operates within a network environment, uses spreadsheet, database, word processing, and internet applications proficiently. Learns new applications without difficulty and is able to aid others in immediate work area with computer questions. Responsibilities PROVIDES COMPREHENSIVE NUTRITION CARE OF PATIENTS ACCORDING TO POLICIES & PROCEDURES Responsible for nutritional assessment completions 100% per policy Meets charting guidelines 100% of the time determined by chart audits Provides quality medical nutrition therapy as appropriate on patient care units including necessary follows and in accordance with facility policy Performs nutrition focus physical exams as medically appropriate for the diagnosis of malnutrition. Participates in the review of the Patient Satisfaction Data and contributes to the development of the action plan and implementation of the plan ACTIVELY PROVIDES NUTRITION SUPPORT THROUGH ASSESSMENT, DEVELOPMENT OF A NUTRITION CARE PLAN, IMPLEMENTATION OF NUTRITION CARE PLAN, AND MONITORING OF NUTRITION THERAPY Works with other Nutritional Services Team members to provide nutrition therapy in a timely manner. Must participate in a required rotation for weekend and holiday coverage Writes and manages TPN and PN including, labs orders and review with pharmacological recommendation and follow up as necessary Writes and manages enteral nutrition as necessary with follow ups as needed Participates and presents in rounds, education seminars, Journal Club, team meetings, etc. to gain knowledge in Nutrition Support and medical nutrition therapy as evidenced in personal portfolio Is able to accurately document assessment and MNT in the patient EMR and menu management program. PROVIDES NUTRITION CARE OF PATIENTS ACCORDING TO REGULATORY BODIES SUCH AS JCAHO, IDPH, CARF, ETC. AND CURRENT TRENDS AND KNOWLEDGE ACQUIRED ANNUALLY Maintains knowledge of regulations Analyzes performance compared to regulations and offers ways to better, efficiently comply to provide optimum nutrition care Fulfills CDR and IDPR education requirements and maintains report portfolio with education receipts for IDPH or CDR audit PROVIDES NUTRITION EDUCATION TO PATIENTS, FAMILIES, COMMUNITY EVENTS, STAFF GROUPS, MEDIA, DIETETIC STUDENTS AND INTERNS etc. Develops and utilizes a variety of processes to determine patient education needs, ie consults, assessments, orders, communication with other staff, care paths, etc. Works cooperatively with Dining Hosts in determining and providing patients' education needs Assists with in-services for Dining Hosts regarding diets Provides nutrition education to patients, family members, staff, and community groups Participates in the training of the Dietetic Students and Dietetic Interns. Plans their curriculum, gives pertinent assignments, corrects and reviews assignments with interns Participates in intern Case Study Presentations, taking turn in being a preceptor Assists in doing intern's midterm and final review About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $26.1per hour - $43.59per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
07/24/2026
Full time
Overview The Clinical Dietitian is responsible for the nutrition screening, assessment, monitoring, evaluation, and education of MMCI patients through an integrated approach to nutrition care. Join a team where no two days look the same. We're seeking a motivated and compassionate Registered Dietitian to support both our Family Practice and Digestive Health clinics. If you thrive in a dynamic environment and enjoy working with a wide variety of patient needs, this role offers the perfect blend of collaboration, autonomy, and clinical diversity. In this unique split role, you'll work with patients across two service lines, providing a broad and rewarding mix of clinical experiences. A significant portion of your time will focus on weight management, helping patients create sustainable lifestyle changes to meet their health goals. You will: Provide individualized nutrition counseling to patients in Family Practice and Digestive Health settings. Support and guide patients through weight management, including medical weight loss programs. Collaborate closely with providers to create nutrition plans that align with patient diagnoses and care plans. Educate patients on topics such as healthy eating patterns, digestive health, chronic disease prevention, and behavior modification. Build strong, ongoing relationships with patients to help them make meaningful and lasting change. Participate in program development and continuous improvement initiatives. What Makes This Role Exciting: Variety that keeps you engaged: Alternate between Family Practice and Digestive Health, offering rich clinical exposure. A strong focus on patient impact: Play a key role in helping patients navigate their weight management journey. Room to grow: Opportunities for professional development, program involvement, and expansion of specialty skills. A supportive, collaborative culture: Work alongside a multi disciplinary team committed to exceptional patient care. This position (Registered Dietitians only) qualifies for a $5,000 sign-on bonus Qualifications Educational Requirements Education Level Field of Study Bachelor's Degree Dietetics Or Bachelor's Degree Related Field Licensure/Certification Requirements Licenses/Certifications Licensed Dietitian Nutritionist - Illinois Department of Financial and Professional Regulation (IDFPR) And Registered Dietitian (RD) - Commission on Dietetic Registration (CDR) Experience Requirement Work Experience Length of Experience Healthcare 1+ years Specialized Knowledge and Skills Requirements Required English Skills Basic reading skills Basic writing skills Basic oral skills Communication Skills Ability to respond appropriately to customer/co-worker Interaction with a wide variety of people Maintain confidential information Ability to communicate only the facts to recipients or to decline to reveal information Ability to project a professional, friendly, helpful demeanor Computer Skills Intermediate computer knowledge: Ability to troubleshoot minor problems within a Windows OS, operates within a network environment, uses spreadsheet, database, word processing, and internet applications proficiently. Learns new applications without difficulty and is able to aid others in immediate work area with computer questions. Responsibilities PROVIDES COMPREHENSIVE NUTRITION CARE OF PATIENTS ACCORDING TO POLICIES & PROCEDURES Responsible for nutritional assessment completions 100% per policy Meets charting guidelines 100% of the time determined by chart audits Provides quality medical nutrition therapy as appropriate on patient care units including necessary follows and in accordance with facility policy Performs nutrition focus physical exams as medically appropriate for the diagnosis of malnutrition. Participates in the review of the Patient Satisfaction Data and contributes to the development of the action plan and implementation of the plan ACTIVELY PROVIDES NUTRITION SUPPORT THROUGH ASSESSMENT, DEVELOPMENT OF A NUTRITION CARE PLAN, IMPLEMENTATION OF NUTRITION CARE PLAN, AND MONITORING OF NUTRITION THERAPY Works with other Nutritional Services Team members to provide nutrition therapy in a timely manner. Must participate in a required rotation for weekend and holiday coverage Writes and manages TPN and PN including, labs orders and review with pharmacological recommendation and follow up as necessary Writes and manages enteral nutrition as necessary with follow ups as needed Participates and presents in rounds, education seminars, Journal Club, team meetings, etc. to gain knowledge in Nutrition Support and medical nutrition therapy as evidenced in personal portfolio Is able to accurately document assessment and MNT in the patient EMR and menu management program. PROVIDES NUTRITION CARE OF PATIENTS ACCORDING TO REGULATORY BODIES SUCH AS JCAHO, IDPH, CARF, ETC. AND CURRENT TRENDS AND KNOWLEDGE ACQUIRED ANNUALLY Maintains knowledge of regulations Analyzes performance compared to regulations and offers ways to better, efficiently comply to provide optimum nutrition care Fulfills CDR and IDPR education requirements and maintains report portfolio with education receipts for IDPH or CDR audit PROVIDES NUTRITION EDUCATION TO PATIENTS, FAMILIES, COMMUNITY EVENTS, STAFF GROUPS, MEDIA, DIETETIC STUDENTS AND INTERNS etc. Develops and utilizes a variety of processes to determine patient education needs, ie consults, assessments, orders, communication with other staff, care paths, etc. Works cooperatively with Dining Hosts in determining and providing patients' education needs Assists with in-services for Dining Hosts regarding diets Provides nutrition education to patients, family members, staff, and community groups Participates in the training of the Dietetic Students and Dietetic Interns. Plans their curriculum, gives pertinent assignments, corrects and reviews assignments with interns Participates in intern Case Study Presentations, taking turn in being a preceptor Assists in doing intern's midterm and final review About Us Find it here. Discover the job, the career, the purpose you were meant for. At Carle Health, we're committed to fostering a workplace where every team member feels valued, respected and empowered, where passion and purpose come together to positively impact the lives of our patients and our communities. Find it all at Carle Health. Our nearly 17,000 team members and providers work together to support patient care across central and southeastern Illinois. We've grown to include eight, award-winning hospitals and a multispecialty provider group with more than 1,500 doctors and advanced practice providers. We're developing the next generation of providers and healthcare professionals through Carle Illinois College of Medicine, the world's first engineering-based medical school, and Methodist College. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. For more information: . Compensation and Benefits The compensation range for this position is $26.1per hour - $43.59per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.
Hourly Range: $18.15 per hour About SMU: SMU's more than 12,000 diverse, high-achieving students come from all 50 states and over 80 countries to take advantage of the University's small classes, meaningful research opportunities, leadership development, community service, international study and innovative programs. SMU serves approximately 7,000 undergraduates and 5,000 graduate students through eight degree-granting schools: Dedman College of Humanities and Sciences, Cox School of Business, Lyle School of Engineering, Meadows School of the Arts, Simmons School of Education and Human Development, Dedman School of Law, Perkins School of Theology and Moody School of Graduate and Advanced Studies. SMU is data driven, and its powerful supercomputing ecosystem - paired with entrepreneurial drive - creates an unrivaled environment for the University to deliver research excellence. Now in its second century of achievement, SMU is recognized for the ways it supports students, faculty and alumni as they become ethical, enterprising leaders in their professions and communities. SMU's relationship with Dallas - the dynamic center of one of the nation's fastest-growing regions - offers unique learning, research, social and career opportunities that provide a launch pad for global impact. SMU is nonsectarian in its teaching and committed to academic freedom and open inquiry. About the Position: This role is an on-campus, in-person position. This is an entry-level position. The position performs manual work and both unskilled and semi-skilled tasks that are of a physically demanding nature. Work involves, but is not limited to the performance of duties, which are of a routine nature and are performed with some degree of independence. Tasks include but are not limited to: general requests for service with a special emphasis on asset moves and event assistance, refuse/recycling collection, snow/ice removal, pressure washering, and routine pickups, and delivery tasks. Essential Functions: Drive trucks, up to 3-tons, for hauling recycle/refuse, personnel, equipment and materials. Unload and move materials, supplies, furniture, and equipment. Operate tractors, forklifts, and other light equipment. Perform related work as required. Inspect, schedule and perform Pressure-washing as needed. Other duties as assigned Must be able & willing to work longer hours for emergencies & to meet deadlines. Evening & weekend work for scheduled work & emergency response is required. Shift flex is required for evenings & weekends. Schedules may be adjusted to accommodate coverage. Qualifications Education and Experience: A high school diploma or equivalent is required. A minimum of one (1) year of work experience is required. Work experience in a related field/trade preferred. Knowledge, Skills and Abilities: Candidate must demonstrate strong interpersonal and verbal communication skills, with the ability to communicate broadly across the University. Must be able to understand and carry out oral and written instructions. Strong written communication skills desired. Candidate must possess strong problem-solving skills with the ability to identify and analyze problems, as well as devise solutions. Must also have strong organizational, planning and time management skills. Candidate must have the ability to use a variety of small power tools and lighting equipment. Must also have the ability to operate trucks, up to, 3-tons. Demonstrate knowledge of the materials, supplies, equipment, and practices used in the trade, preferred. The ability to recognize minor maintenance needs for vehicles and other equipment is essential. The ability to use an ipad to manage, track, and close work orders is essential. Knowledge of and/or experience with a computerized maintenance management systems (CMMS) preferred. Candidate must posses a valid Texas driver's License and have a clean driving history (MVR). Training/license to operate a light to medium-heavy trucks, forklifts and moving equipment preferred. Physical and Environmental Demands: Sit for long periods of time Bend, crawl, squat and climb Reach above shoulders Carry/lift 25 lbs. Kneel and stand Walk for long distances Push/Pull Handle objects (dexterity) Carry/lift over 50lbs. Deadline to Apply: This position is open until filled. EEO Statement: SMU is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, age, disability, genetic information, veteran status, sexual orientation, or gender identity and expression Benefits: SMU offers staff a broad, competitive array of health and related benefits. In addition to traditional benefits such as health, dental, and vision plans, SMU offers a wide range of wellness programs to help attract, support, and retain our employees whose work continues to make SMU an outstanding education and research institution. SMU is committed to providing an array of retirement programs that benefit and protect you and your family throughout your working years at SMU and, if you meet SMU's retirement eligibility criteria, during your retirement years after you leave SMU. The value of learning at SMU isn't just about preparing our students for the future. Employees have access to a wide variety of professional and personal development opportunities, including tuition benefits.
07/24/2026
Full time
Hourly Range: $18.15 per hour About SMU: SMU's more than 12,000 diverse, high-achieving students come from all 50 states and over 80 countries to take advantage of the University's small classes, meaningful research opportunities, leadership development, community service, international study and innovative programs. SMU serves approximately 7,000 undergraduates and 5,000 graduate students through eight degree-granting schools: Dedman College of Humanities and Sciences, Cox School of Business, Lyle School of Engineering, Meadows School of the Arts, Simmons School of Education and Human Development, Dedman School of Law, Perkins School of Theology and Moody School of Graduate and Advanced Studies. SMU is data driven, and its powerful supercomputing ecosystem - paired with entrepreneurial drive - creates an unrivaled environment for the University to deliver research excellence. Now in its second century of achievement, SMU is recognized for the ways it supports students, faculty and alumni as they become ethical, enterprising leaders in their professions and communities. SMU's relationship with Dallas - the dynamic center of one of the nation's fastest-growing regions - offers unique learning, research, social and career opportunities that provide a launch pad for global impact. SMU is nonsectarian in its teaching and committed to academic freedom and open inquiry. About the Position: This role is an on-campus, in-person position. This is an entry-level position. The position performs manual work and both unskilled and semi-skilled tasks that are of a physically demanding nature. Work involves, but is not limited to the performance of duties, which are of a routine nature and are performed with some degree of independence. Tasks include but are not limited to: general requests for service with a special emphasis on asset moves and event assistance, refuse/recycling collection, snow/ice removal, pressure washering, and routine pickups, and delivery tasks. Essential Functions: Drive trucks, up to 3-tons, for hauling recycle/refuse, personnel, equipment and materials. Unload and move materials, supplies, furniture, and equipment. Operate tractors, forklifts, and other light equipment. Perform related work as required. Inspect, schedule and perform Pressure-washing as needed. Other duties as assigned Must be able & willing to work longer hours for emergencies & to meet deadlines. Evening & weekend work for scheduled work & emergency response is required. Shift flex is required for evenings & weekends. Schedules may be adjusted to accommodate coverage. Qualifications Education and Experience: A high school diploma or equivalent is required. A minimum of one (1) year of work experience is required. Work experience in a related field/trade preferred. Knowledge, Skills and Abilities: Candidate must demonstrate strong interpersonal and verbal communication skills, with the ability to communicate broadly across the University. Must be able to understand and carry out oral and written instructions. Strong written communication skills desired. Candidate must possess strong problem-solving skills with the ability to identify and analyze problems, as well as devise solutions. Must also have strong organizational, planning and time management skills. Candidate must have the ability to use a variety of small power tools and lighting equipment. Must also have the ability to operate trucks, up to, 3-tons. Demonstrate knowledge of the materials, supplies, equipment, and practices used in the trade, preferred. The ability to recognize minor maintenance needs for vehicles and other equipment is essential. The ability to use an ipad to manage, track, and close work orders is essential. Knowledge of and/or experience with a computerized maintenance management systems (CMMS) preferred. Candidate must posses a valid Texas driver's License and have a clean driving history (MVR). Training/license to operate a light to medium-heavy trucks, forklifts and moving equipment preferred. Physical and Environmental Demands: Sit for long periods of time Bend, crawl, squat and climb Reach above shoulders Carry/lift 25 lbs. Kneel and stand Walk for long distances Push/Pull Handle objects (dexterity) Carry/lift over 50lbs. Deadline to Apply: This position is open until filled. EEO Statement: SMU is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, age, disability, genetic information, veteran status, sexual orientation, or gender identity and expression Benefits: SMU offers staff a broad, competitive array of health and related benefits. In addition to traditional benefits such as health, dental, and vision plans, SMU offers a wide range of wellness programs to help attract, support, and retain our employees whose work continues to make SMU an outstanding education and research institution. SMU is committed to providing an array of retirement programs that benefit and protect you and your family throughout your working years at SMU and, if you meet SMU's retirement eligibility criteria, during your retirement years after you leave SMU. The value of learning at SMU isn't just about preparing our students for the future. Employees have access to a wide variety of professional and personal development opportunities, including tuition benefits.
Job Description Job Description Position Overview The Electrical Estimator is responsible for preparing accurate cost estimates for residential and commercial electrical projects. This role works closely with company leadership, field electricians, and suppliers to ensure projects are properly scoped, competitively priced, and profitable. The estimator plays a key role in helping the company pursue new work opportunities and maintain strong project margins. Ideal Candidate Profile You are a hands-on, detail-driven electrical estimator who takes ownership from start to finish. You don't wait for direction-you seek out opportunities, solve problems, and take pride in winning work that is both competitive and profitable. You are comfortable operating in a small, fast-paced environment where accountability is high, systems are evolving, and your contributions directly impact the company's growth. You value accuracy, follow-through, and relationships, and you're motivated by the opportunity to build, improve, and grow alongside the business. Compensation Salary Range: $62,000 - $73,000 annually depending on experience. This role may include eligibility for future performance-based bonuses and benefit enhancements tied to company growth. Minimum Qualifications 3-5 years of electrical field experience, with at least 2-3 years in commercial projects 2+ years of electrical estimating experience, preferably in small to mid-sized contracting environments Demonstrated ability to read and interpret electrical blueprints, specifications, and construction drawings Working knowledge of electrical materials, methods, and installation practices across commercial scopes Proficiency in estimating software such as EBM or comparable platforms (e.g., Accubid, McCormick, Vision) Strong attention to detail with the ability to produce accurate and organized takeoffs, bid summaries, and proposals Solutions-oriented mindset, with the ability to identify issues and propose practical, cost-effective approaches Self-starter who can manage priorities, meet deadlines, and operate with limited oversight Demonstrated ability to research and identify bid opportunities independently, including navigating plan rooms and public/private bid sources Demonstrated contribution to successful bids, with the ability to discuss past projects, bid strategy, and outcomes (e.g., win rates, awarded projects, or scope responsibility) Key Responsibilities Estimating & Bidding Review plans, specifications, and scope documents Perform complete electrical takeoffs Calculate labor hours and material costs Request and evaluate supplier quotes Prepare and submit bid proposals Track bid results and maintain estimate records Create all bids using electrical estimating software Submit, track and manage all RFIs and change orders Project Setup Create job cost budgets for awarded projects Coordinate with office and field staff on project scope Assist with procurement of materials Vendor Coordination Maintain relationships with electrical suppliers Identify pricing advantages and cost efficiencies Assist in ordering materials Software & Technical Skills - Preferred experience with: Electrical estimating software (e.g., Accubid, McCormick, ConEst, or similar) Microsoft Excel Digital plan review or takeoff tools Preferred Qualifications Track record of independently leading estimates that resulted in awarded commercial electrical projects Experience with end-to-end bid process, including takeoffs, vendor outreach, scope review, pricing strategy, and proposal submission Familiarity with local Tucson/Arizona market, contractors, and plan rooms (e.g., public bids, GCs, private work) Experience building and managing vendor and subcontractor relationships to support competitive pricing Ability to level bids, identify gaps, and mitigate risk in scope and pricing Strong understanding of labor productivity, job costing, and margin targets Experience collaborating with operations teams to support project handoff and post-bid review Exposure to value engineering or alternate design proposals to improve competitiveness Comfortable working in a fast-paced, small-team environment with evolving systems and processes Performance Expectations The successful candidate will demonstrate the ability to: Prepare accurate and competitive project estimates, typically within 8-15% of final job cost Develop and deliver complete bid packages on time, including takeoffs, scope review, pricing, and proposal documentation Own and maintain organized bid tracking systems, including documentation, version control, and historical data for future reference Collaborate effectively with field leadership, vendors, and suppliers to validate scope, pricing, and constructability Contribute to profitable project acquisition by balancing competitiveness with margin awareness and risk identification Proactively research and identify bid opportunities aligned with company capabilities and growth goals (public and private work) Build and maintain strong working relationships with vendors, general contractors, and prospective clients to support long-term pipeline development Identify scope gaps, risks, and value engineering opportunities to strengthen bids and improve win potential Support smooth handoff from estimating to operations, ensuring clarity of scope, assumptions, and project requirements Detailed performance metrics are established during onboarding and reviewed regularly as part of performance management evaluations. Career Growth & Advancement Path This role is designed for long-term growth within the company. High performers who demonstrate strong ownership, accuracy, and contribution to project wins may have the opportunity to advance into roles such as: Senior Electrical Estimator - Leading larger, more complex projects and overseeing estimating standards Project Manager - Managing awarded work from kickoff through completion, including budget, schedule, and client coordination Preconstruction Manager - Overseeing estimating strategy, bid pipeline, and preconstruction processes Operations Leadership Roles - Supporting broader company growth through team leadership, process development, and strategic execution Physical Requirements Ability to sit and work at a computer for extended periods Ability to occasionally lift up to 25 pounds Ability to review construction plans and technical documentation Reasonable accommodations may be provided in accordance with applicable law. Work Environment This role operates primarily in an office environment with periodic visits to construction job sites. Equal Opportunity Employer M&R Electrical, LLC is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, or any other protected classification under applicable federal, state, or local laws. Other Duties This job description is intended to describe the general nature and level of work being performed. Duties may be modified or assigned as business needs evolve.
07/24/2026
Full time
Job Description Job Description Position Overview The Electrical Estimator is responsible for preparing accurate cost estimates for residential and commercial electrical projects. This role works closely with company leadership, field electricians, and suppliers to ensure projects are properly scoped, competitively priced, and profitable. The estimator plays a key role in helping the company pursue new work opportunities and maintain strong project margins. Ideal Candidate Profile You are a hands-on, detail-driven electrical estimator who takes ownership from start to finish. You don't wait for direction-you seek out opportunities, solve problems, and take pride in winning work that is both competitive and profitable. You are comfortable operating in a small, fast-paced environment where accountability is high, systems are evolving, and your contributions directly impact the company's growth. You value accuracy, follow-through, and relationships, and you're motivated by the opportunity to build, improve, and grow alongside the business. Compensation Salary Range: $62,000 - $73,000 annually depending on experience. This role may include eligibility for future performance-based bonuses and benefit enhancements tied to company growth. Minimum Qualifications 3-5 years of electrical field experience, with at least 2-3 years in commercial projects 2+ years of electrical estimating experience, preferably in small to mid-sized contracting environments Demonstrated ability to read and interpret electrical blueprints, specifications, and construction drawings Working knowledge of electrical materials, methods, and installation practices across commercial scopes Proficiency in estimating software such as EBM or comparable platforms (e.g., Accubid, McCormick, Vision) Strong attention to detail with the ability to produce accurate and organized takeoffs, bid summaries, and proposals Solutions-oriented mindset, with the ability to identify issues and propose practical, cost-effective approaches Self-starter who can manage priorities, meet deadlines, and operate with limited oversight Demonstrated ability to research and identify bid opportunities independently, including navigating plan rooms and public/private bid sources Demonstrated contribution to successful bids, with the ability to discuss past projects, bid strategy, and outcomes (e.g., win rates, awarded projects, or scope responsibility) Key Responsibilities Estimating & Bidding Review plans, specifications, and scope documents Perform complete electrical takeoffs Calculate labor hours and material costs Request and evaluate supplier quotes Prepare and submit bid proposals Track bid results and maintain estimate records Create all bids using electrical estimating software Submit, track and manage all RFIs and change orders Project Setup Create job cost budgets for awarded projects Coordinate with office and field staff on project scope Assist with procurement of materials Vendor Coordination Maintain relationships with electrical suppliers Identify pricing advantages and cost efficiencies Assist in ordering materials Software & Technical Skills - Preferred experience with: Electrical estimating software (e.g., Accubid, McCormick, ConEst, or similar) Microsoft Excel Digital plan review or takeoff tools Preferred Qualifications Track record of independently leading estimates that resulted in awarded commercial electrical projects Experience with end-to-end bid process, including takeoffs, vendor outreach, scope review, pricing strategy, and proposal submission Familiarity with local Tucson/Arizona market, contractors, and plan rooms (e.g., public bids, GCs, private work) Experience building and managing vendor and subcontractor relationships to support competitive pricing Ability to level bids, identify gaps, and mitigate risk in scope and pricing Strong understanding of labor productivity, job costing, and margin targets Experience collaborating with operations teams to support project handoff and post-bid review Exposure to value engineering or alternate design proposals to improve competitiveness Comfortable working in a fast-paced, small-team environment with evolving systems and processes Performance Expectations The successful candidate will demonstrate the ability to: Prepare accurate and competitive project estimates, typically within 8-15% of final job cost Develop and deliver complete bid packages on time, including takeoffs, scope review, pricing, and proposal documentation Own and maintain organized bid tracking systems, including documentation, version control, and historical data for future reference Collaborate effectively with field leadership, vendors, and suppliers to validate scope, pricing, and constructability Contribute to profitable project acquisition by balancing competitiveness with margin awareness and risk identification Proactively research and identify bid opportunities aligned with company capabilities and growth goals (public and private work) Build and maintain strong working relationships with vendors, general contractors, and prospective clients to support long-term pipeline development Identify scope gaps, risks, and value engineering opportunities to strengthen bids and improve win potential Support smooth handoff from estimating to operations, ensuring clarity of scope, assumptions, and project requirements Detailed performance metrics are established during onboarding and reviewed regularly as part of performance management evaluations. Career Growth & Advancement Path This role is designed for long-term growth within the company. High performers who demonstrate strong ownership, accuracy, and contribution to project wins may have the opportunity to advance into roles such as: Senior Electrical Estimator - Leading larger, more complex projects and overseeing estimating standards Project Manager - Managing awarded work from kickoff through completion, including budget, schedule, and client coordination Preconstruction Manager - Overseeing estimating strategy, bid pipeline, and preconstruction processes Operations Leadership Roles - Supporting broader company growth through team leadership, process development, and strategic execution Physical Requirements Ability to sit and work at a computer for extended periods Ability to occasionally lift up to 25 pounds Ability to review construction plans and technical documentation Reasonable accommodations may be provided in accordance with applicable law. Work Environment This role operates primarily in an office environment with periodic visits to construction job sites. Equal Opportunity Employer M&R Electrical, LLC is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, or any other protected classification under applicable federal, state, or local laws. Other Duties This job description is intended to describe the general nature and level of work being performed. Duties may be modified or assigned as business needs evolve.