71 jobs found

Job Description Job Description Associated Ready Mixed Concrete is looking to hire FULL TIME Diesel Technicians level 2. As a valued member of our team, the Maintenance Truck Tech II is required to perform all duties of a level 1, in addition to perform basic to mid-level repair skills on at least 80% of all vehicle areas including hydraulic systems, engine and transmission accessories. Effective skills in welding, use of torch and A/C systems. Not including electronic or high-level diagnostics and repairs on all vehicle areas; also, not including internal component repairs of engine, transmissions, and gear boxes. Shift Tuesday - Saturday 10:00 am to 6:30 pm Pay Range Tech II: $34.00 Travel Required: Estimated less than 25% Benefits Paid Holidays Paid Vacation Medical, Dental, Vision 401k Retirement $100 credit for boots after 90 days Uniforms provided Tool allowance when applicable Monthly credit for cellphone use Responsibilities • Appropriate tools required to diagnose and perform mayor repairs in vehicles. • Able to use compressed gas torch and adjustments. • Effectively do inspections and mechanical repairs to equipment and routine preventive services. • Efficient communication and computer skills for proper file documentation on each job performed. • Knowledge and ability to identify the proper name of all visible parts and non-visible parts in a vehicle. • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance. • Will maintain appropriate record keeping for Bit inspections, DVIRs, work done description and work orders. • Ensures vehicles meet CHP/BIT/PM inspection requirements. • Replace, install and service brake systems, cab and sheet metal components, engine accessories, HVAC systems, hydraulic systems, and lighting electrical systems. • Replace, install and service mixer truck equipment, product transfer systems, starting systems, steering systems, transmissions, wheels, hubs, and bearings. • Replace, install frame components and basic diagnose of electronic control systems. • Replace, install, service and diagnose charging systems, clutches and drive lines, and suspensions systems. • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers, or mixers. • Will install, select, or identify proper tire replacements & legal limit knowledge. • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant, or yard equipment. • Perform routine and preventive maintenance to keep vehicles and equipment in compliance with DOT and company standards. Minimum Education and Experience High school diploma. 4+ years of heavy-duty tractor maintenance experience. 4+ years experience of work on electrical, mechanical, and hydraulic systems. Must have own tools. Preferred Education and Experience Associates degree, technical school certificate or equivalent experience. 5+ years of heavy-duty tractor maintenance experience. 5+ years experience of work on electrical, mechanical, and hydraulic systems. 3+ years experience welding. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This Organization Participates in E-Verify Esta Organizacion Participa en E-Verify Associated Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera.

Job Description Job Description Field Service Technicians, Forklift Mechanic Edison, NJ 08837 $1,000 SIGN-ON BONUS - Field Service Technician (Mobile Mechanic) Full-Time Get Out of the Shop. Get Into the Field. We're hiring Field Service Mechanics, Mobile Mechanics, and Heavy Equipment Mechanics to work on forklifts and heavy equipment across NJ, NY & Eastern PA If you want independence, variety, and strong earning potential - keep reading WHY THIS JOB STANDS OUT: $1,000 Signing Bonus (for experienced forklift techs) Union Pension Plan (huge long-term value) Consistent Overtime available Medical, Dental, Vision Paid Vacation + Retirement Options Competitive Pay: $22-$35/hr. WHAT YOU'LL DO: Diagnose & repair forklifts / heavy equipment onsite Travel locally to customer locations (no long hauls) Work independently with strong support team Keep equipment running and customers productive WHAT YOU NEED: At least 1+ year mechanical experience (forklifts, diesel, heavy equipment, or similar) Valid driver's license + clean record Ability to work independently Certifications are a plus (not required) WHO THIS IS PERFECT FOR: Mechanics tired of shop work Techs who want autonomy + variety Anyone looking to grow with a stable, expanding company We are an equal opportunity employer, and we are an organization that values diversity. We welcome applications from all qualified candidates, including minorities and persons with disabilities. req22-01201

Job Description Job Description A School Bus Auto Diesel Technician is a specialized mechanic responsible for maintaining and repairing diesel-powered school buses. Their role includes diagnosing engine problems, performing preventative maintenance, and ensuring that all components of the bus operate safely and efficiently. This position often requires a combination of mechanical skills, knowledge of diesel engine systems, and familiarity with safety and emissions standards. Key responsibilities may include: Engine Diagnostics and Repair: Identifying issues in diesel engines using diagnostic tools and techniques and performing necessary repairs or replacements. Preventative Maintenance: Conducting regular inspections and maintenance tasks to prevent breakdowns and ensure the buses are in top operating condition. Brake and Suspension Work: Inspecting and repairing braking systems, suspension components, and other critical parts that affect the safety of the vehicle. Electrical System Repair: Troubleshooting and fixing issues in the bus's electrical systems, which can include wiring, lighting, and ignition systems. Compliance with Safety Standards: Ensuring all repairs and maintenance work comply with safety regulations and standards, including emissions guidelines. Record-Keeping: Maintaining detailed records of all inspections, repairs, and maintenance performed on the buses. To become a School Bus Auto Diesel Technician, one typically needs: Technical Training: Certification or training in diesel technology or automotive mechanics, often from a technical school or community college. Experience: Practical experience working with diesel engines, especially in the context of heavy vehicles like buses or trucks. Certifications: Industry-recognized certifications such as ASE (Automotive Service Excellence) certification for diesel mechanics can be beneficial. Problem-Solving Skills: The ability to quickly diagnose and solve mechanical issues. Attention to Detail: Precision in both the inspection and repair process to ensure safety and efficiency.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Job Description Job Description We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 5 to 10 years' experience. Founded in 1977, C&C Lift Truck , Inc. has continuously grown over the last 49 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and currently service NY, NJ and Eastern PA. We are currently looking for an experience A Level Shop Technician to work in our Edison, NJ location. Our mechanics will be required to accurately diagnose and repair all company and customer equipment. C&C Offers: Union Pension Plan Medical, Dental, Vision benefits available Vacation Time Retirement Plan Opportunities Overtime Opportunities Competitive wages Supplemental Pay (bonus pay, commission pay, signing bonus) Primary Responsibilities: Assign and manage workload for other shop technicians Assist junior technicians with complex repairs Job will require IC forklift repairs, including: Complex diagnostic on all makes and models Large repairs, such as transmission overhauls, engine rebuilds, replacements, etc. Diagnostic and repair of fuel systems (Gas, LPG, & Diesel) Electric forklift repairs Diagnosis of complex wiring issues Battery and charger diagnostic and repair Hydraulic system repairs Brake and steer axle system repairs Complete scheduled PM and repair assignments within the time frame allotted Use diagnostic tools to test forklift components Perform quality inspections on junior technicians' repairs and services. Skills Required: Prior foreman or management experience The ability to stand and walk for long periods of time Computer proficient, with history of working with digital workorder systems and computer diagnostic tools. Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job Employee must be able to communicate effectively with management, customers, and other employees Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks Employee must be able to analyze information and write a diagnosis on work orders The ability to decipher different colors Must be able to work individually and as a team Qualifications: Prefer 3 or more years' experience as a heavy equipment mechanic or related mechanic jobs Strong mechanical aptitude and troubleshooting skills Deadline and detail-oriented Ability to lift 50 lbs. Willingness to learn Ability to thrive in a fast-paced environment Schedule: 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to undergo a criminal, drug screening and motor vehicle background check. Company Description Founded in 1977, C&C Lift Truck, Inc. has continuously grown over the last 49 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience-level forklift mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. Company Description Founded in 1977, C&C Lift Truck, Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience-level forklift mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Skilled A-Level Automotive Tech $35-$50/HR M-F If you're an experienced diagnostic technician who takes pride in fixing vehicles right the first time, Wrench Turner Automotive wants to meet you. We're one of the highest-rated independent repair shops in the Clover area with a busy, steady workflow, a modern climate-controlled facility, and a team that genuinely enjoys working together. We believe talented technicians deserve consistent work, quality equipment, and a shop where they can focus on repairs instead of unnecessary distractions. Key Highlights $35-$50/hour ( flat rate ) Weekly Pay Monday-Friday Schedule (8:00 AM-5:00 PM) Optional Saturday Hours Available Busy Shop with Steady Car Count Climate-Controlled Shop (Heat & A/C) 5 Bays / 5 Lifts / Alignment Rack PTO Offered Paid Major Holidays Uniforms Provided Monthly Paid Training Available ASE Reimbursement Friendly, Low-Drama Team No Diesel, Transmission, or Exhaust Work How to Apply (IMPORTANT) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. What You'll Do Diagnose drivability concerns Perform advanced electrical diagnostics Diagnose check engine lights Complete general automotive repairs Perform brake and suspension work Troubleshoot wiring issues Complete preventative maintenance Maintain quality workmanship while producing 40-50 flagged hours per week Communicate repair needs using TechMetric Our service advisors handle estimates and parts ordering so you can stay focused on repairing vehicles. What We're Looking For 5+ years of professional automotive repair experience Advanced diagnostic skills Strong electrical troubleshooting ability Ability to work on Domestic, Asian, and European vehicles Valid driver's license Own professional tools Positive attitude and team mentality Why You'll Love Working Here We aren't a corporate chain. We're a locally respected independent shop with outstanding customer reviews , a steady workload, and owners who value good technicians. Our shop is modern, organized, and equipped with the tools you need to succeed. We work hard, help one another, enjoy weekly team lunches, and reward quality work. If you're looking for a long-term home where your skills are appreciated, we'd love to talk. Apply today and complete your initial screening with Paige to be considered.

Trailer Technician / Trailer Mechanic Trailer Maintenance - Weekly Pay - Sign-On Bonus Company Overview TEN (Transportation Equipment Network) is the North American leader in transportation equipment, trailer leasing, maintenance, and fleet solutions. We operate one of the largest and most diverse trailer fleets in the industry, with over 80,000 trailers, supported by 240 service bays, 118 mobile service trucks, and 430+ skilled technicians across North America. Backed by decades of industry expertise and a strong commitment to safety, performance, and innovation, TEN provides full-service trailer maintenance and repair solutions that keep commercial fleets moving safely and efficiently. Position: Trailer Technician / Trailer Mechanic The Trailer Technician is responsible for performing diagnostics, preventive maintenance, and repair on a wide range of trailers, including dry vans, reefers, flatbeds, cargo trailers, and utility trailers. This role requires experience troubleshooting mechanical, electrical, hydraulic, and structural systems while ensuring all equipment meets DOT and safety compliance standards. Essential Duties & Responsibilities Inspect, diagnose, and repair mechanical, electrical, and structural issues on trailers Perform preventive maintenance (PM) and routine trailer servicing Repair or replace brake systems, suspensions, axles, landing gear, and wheel-end components Troubleshoot and repair lighting systems, wiring, and electrical components Complete frame, body, and structural repairs, including welding and fabrication Conduct DOT inspections and ensure all work meets regulatory and company standards Use diagnostic tools, equipment, and repair manuals to identify issues Document all repairs and maintain accurate work orders in the maintenance system Maintain a clean, safe, and compliant work environment Communicate effectively with supervisors and team members regarding repair needs Required Qualifications Experience as a Trailer Technician, Trailer Mechanic, Diesel Technician, Fleet Technician, or similar role Strong mechanical aptitude with hands-on experience in trailer repair and maintenance Knowledge of brake systems, suspension systems, hydraulics, electrical systems, and DOT requirements Ability to use shop tools, diagnostic equipment, and welding/fabrication tools Ability to lift, move, and work with heavy equipment and trailer components Strong problem-solving skills and attention to detail Commitment to a safe work environment and regulatory compliance Preferred Qualifications Welding and fabrication experience Previous experience in the transportation, trucking, or fleet maintenance industry strongly preferred Experience working with multiple trailer types (dry van, flatbed, reefer, utility, etc.) strongly preferred Ability to work independently and as part of a team in a fast-paced shop environment Why Work With Us Industry-leading tools, equipment, and support Opportunities for growth, technical training, and career advancement Work with a trusted leader in the transportation and fleet service industry Benefits: We believe in rewarding our employees for their exceptional skills and dedication. That's why we offer our employees a range of attractive benefits that set us apart from the rest: WEEKLY PAY! Up to $6,000 Sign on/Retention Bonus Quarterly bonuses Comprehensive health and dental plans with flexible spending accounts, including company contributions Paid time off and paid holidays Equipment allowances, education reimbursements, & certification programs 401k with company match and profit sharing Recognition programs and service awards Skills Keywords Trailer repair, trailer technician, trailer mechanic, fleet maintenance, PM service, preventive maintenance, DOT inspections, brake repair, welding, fabrication, suspension repair, electrical troubleshooting, hydraulic systems, mechanical repair, trucking industry, transportation equipment, shop technician, diesel repair support, vehicle inspection, trailer diagnostics. TEN (Transportation Equipment Network) is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Experienced Trailer Technician - Semi-Trailer Repair & Maintenance Trailer Maintenance - Weekly Pay - $3000 Sign-On Bonus Company Overview TEN (Transportation Equipment Network) is the North American leader in transportation equipment, trailer leasing, maintenance, and fleet solutions. We operate one of the largest and most diverse trailer fleets in the industry, with over 80,000 trailers, supported by 240 service bays, 118 mobile service trucks, and 430+ skilled technicians across North America. Backed by decades of industry expertise and a strong commitment to safety, performance, and innovation, TEN provides full-service trailer maintenance and repair solutions that keep commercial fleets moving safely and efficiently. Benefits: We believe in rewarding our employees for their exceptional skills and dedication. That's why we offer our employees a range of attractive benefits that set us apart from the rest: WEEKLY PAY! $3000 Sign on Bonus/ $3000 Additional Retention Bonus Quarterly bonuses Comprehensive health and dental plans with flexible spending accounts, including company contributions Paid time off and paid holidays Equipment allowances, education reimbursements, & certification programs 401k with company match and profit sharing Recognition programs and service awards Position: Trailer Technician / Trailer Mechanic The Trailer Technician is responsible for performing diagnostics, preventive maintenance, and repair on a wide range of trailers, including dry vans, reefers, flatbeds, cargo trailers, and utility trailers. This role requires experience troubleshooting mechanical, electrical, hydraulic, and structural systems while ensuring all equipment meets DOT and safety compliance standards. Essential Duties & Responsibilities Inspect, diagnose, and repair mechanical, electrical, and structural issues on trailers Perform preventive maintenance (PM) and routine trailer servicing Repair or replace brake systems, suspensions, axles, landing gear, and wheel-end components Troubleshoot and repair lighting systems, wiring, and electrical components Complete frame, body, and structural repairs, including welding and fabrication Conduct DOT inspections and ensure all work meets regulatory and company standards Use diagnostic tools, equipment, and repair manuals to identify issues Document all repairs and maintain accurate work orders in the maintenance system Maintain a clean, safe, and compliant work environment Communicate effectively with supervisors and team members regarding repair needs Required Qualifications Experience as a Trailer Technician, Trailer Mechanic, Diesel Technician, Fleet Technician, or similar role Strong mechanical aptitude with hands-on experience in trailer repair and maintenance Knowledge of brake systems, suspension systems, hydraulics, electrical systems, and DOT requirements Ability to use shop tools, diagnostic equipment, and welding/fabrication tools Ability to lift, move, and work with heavy equipment and trailer components Strong problem-solving skills and attention to detail Commitment to a safe work environment and regulatory compliance Preferred Qualifications Welding and fabrication experience Previous experience in the transportation, trucking, or fleet maintenance industry strongly preferred Experience working with multiple trailer types (dry van, flatbed, reefer, utility, etc.) strongly preferred Ability to work independently and as part of a team in a fast-paced shop environment Why Work With Us Industry-leading tools, equipment, and support Opportunities for growth, technical training, and career advancement Work with a trusted leader in the transportation and fleet service industry Skills Keywords Trailer repair, trailer technician, trailer mechanic, fleet maintenance, PM service, preventive maintenance, DOT inspections, brake repair, welding, fabrication, suspension repair, electrical troubleshooting, hydraulic systems, mechanical repair, trucking industry, transportation equipment, shop technician, diesel repair support, vehicle inspection, trailer diagnostics. TEN (Transportation Equipment Network) is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Trailer Technician / Trailer Mechanic Trailer Maintenance - Weekly Pay - Sign-On Bonus Company Overview TEN (Transportation Equipment Network) is the North American leader in transportation equipment, trailer leasing, maintenance, and fleet solutions. We operate one of the largest and most diverse trailer fleets in the industry, with over 80,000 trailers, supported by 240 service bays, 118 mobile service trucks, and 430+ skilled technicians across North America. Backed by decades of industry expertise and a strong commitment to safety, performance, and innovation, TEN provides full-service trailer maintenance and repair solutions that keep commercial fleets moving safely and efficiently. Position: Trailer Technician / Trailer Mechanic The Trailer Technician is responsible for performing diagnostics, preventive maintenance, and repair on a wide range of trailers, including dry vans, reefers, flatbeds, cargo trailers, and utility trailers. This role requires experience troubleshooting mechanical, electrical, hydraulic, and structural systems while ensuring all equipment meets DOT and safety compliance standards. Essential Duties & Responsibilities Inspect, diagnose, and repair mechanical, electrical, and structural issues on trailers Perform preventive maintenance (PM) and routine trailer servicing Repair or replace brake systems, suspensions, axles, landing gear, and wheel-end components Troubleshoot and repair lighting systems, wiring, and electrical components Complete frame, body, and structural repairs, including welding and fabrication Conduct DOT inspections and ensure all work meets regulatory and company standards Use diagnostic tools, equipment, and repair manuals to identify issues Document all repairs and maintain accurate work orders in the maintenance system Maintain a clean, safe, and compliant work environment Communicate effectively with supervisors and team members regarding repair needs Required Qualifications Experience as a Trailer Technician, Trailer Mechanic, Diesel Technician, Fleet Technician, or similar role Strong mechanical aptitude with hands-on experience in trailer repair and maintenance Knowledge of brake systems, suspension systems, hydraulics, electrical systems, and DOT requirements Ability to use shop tools, diagnostic equipment, and welding/fabrication tools Ability to lift, move, and work with heavy equipment and trailer components Strong problem-solving skills and attention to detail Commitment to a safe work environment and regulatory compliance Preferred Qualifications Welding and fabrication experience Previous experience in the transportation, trucking, or fleet maintenance industry strongly preferred Experience working with multiple trailer types (dry van, flatbed, reefer, utility, etc.) strongly preferred Ability to work independently and as part of a team in a fast-paced shop environment Why Work With Us Industry-leading tools, equipment, and support Opportunities for growth, technical training, and career advancement Work with a trusted leader in the transportation and fleet service industry Benefits: We believe in rewarding our employees for their exceptional skills and dedication. That's why we offer our employees a range of attractive benefits that set us apart from the rest: WEEKLY PAY! Up to $6,000 Sign on/Retention Bonus Quarterly bonuses Comprehensive health and dental plans with flexible spending accounts, including company contributions Paid time off and paid holidays Equipment allowances, education reimbursements, & certification programs 401k with company match and profit sharing Recognition programs and service awards Skills Keywords Trailer repair, trailer technician, trailer mechanic, fleet maintenance, PM service, preventive maintenance, DOT inspections, brake repair, welding, fabrication, suspension repair, electrical troubleshooting, hydraulic systems, mechanical repair, trucking industry, transportation equipment, shop technician, diesel repair support, vehicle inspection, trailer diagnostics. TEN (Transportation Equipment Network) is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Trailer Technician / Trailer Mechanic Trailer Maintenance - Weekly Pay - Sign-On Bonus Company Overview TEN (Transportation Equipment Network) is the North American leader in transportation equipment, trailer leasing, maintenance, and fleet solutions. We operate one of the largest and most diverse trailer fleets in the industry, with over 80,000 trailers, supported by 240 service bays, 118 mobile service trucks, and 430+ skilled technicians across North America. Backed by decades of industry expertise and a strong commitment to safety, performance, and innovation, TEN provides full-service trailer maintenance and repair solutions that keep commercial fleets moving safely and efficiently. Position: Trailer Technician / Trailer Mechanic The Trailer Technician is responsible for performing diagnostics, preventive maintenance, and repair on a wide range of trailers, including dry vans, reefers, flatbeds, cargo trailers, and utility trailers. This role requires experience troubleshooting mechanical, electrical, hydraulic, and structural systems while ensuring all equipment meets DOT and safety compliance standards. Benefits: We believe in rewarding our employees for their exceptional skills and dedication. That's why we offer our employees a range of attractive benefits that set us apart from the rest: WEEKLY PAY! $3000 Sign on/$3000 Retention Bonus Quarterly bonuses Comprehensive health and dental plans with flexible spending accounts, including company contributions Paid time off and paid holidays Equipment allowances, education reimbursements, & certification programs 401k with company match and profit sharing Recognition programs and service awards Essential Duties & Responsibilities Inspect, diagnose, and repair mechanical, electrical, and structural issues on trailers Perform preventive maintenance (PM) and routine trailer servicing Repair or replace brake systems, suspensions, axles, landing gear, and wheel-end components Troubleshoot and repair lighting systems, wiring, and electrical components Complete frame, body, and structural repairs, including welding and fabrication Conduct DOT inspections and ensure all work meets regulatory and company standards Use diagnostic tools, equipment, and repair manuals to identify issues Document all repairs and maintain accurate work orders in the maintenance system Maintain a clean, safe, and compliant work environment Communicate effectively with supervisors and team members regarding repair needs Required Qualifications Experience as a Trailer Technician, Trailer Mechanic, Diesel Technician, Fleet Technician, or similar role Strong mechanical aptitude with hands-on experience in trailer repair and maintenance Knowledge of brake systems, suspension systems, hydraulics, electrical systems, and DOT requirements Ability to use shop tools, diagnostic equipment, and welding/fabrication tools Ability to lift, move, and work with heavy equipment and trailer components Strong problem-solving skills and attention to detail Commitment to a safe work environment and regulatory compliance Preferred Qualifications Welding and fabrication experience Previous experience in the transportation, trucking, or fleet maintenance industry strongly preferred Experience working with multiple trailer types (dry van, flatbed, reefer, utility, etc.) strongly preferred Ability to work independently and as part of a team in a fast-paced shop environment Why Work With Us Industry-leading tools, equipment, and support Opportunities for growth, technical training, and career advancement Work with a trusted leader in the transportation and fleet service industry Skills Keywords Trailer repair, trailer technician, trailer mechanic, fleet maintenance, PM service, preventive maintenance, DOT inspections, brake repair, welding, fabrication, suspension repair, electrical troubleshooting, hydraulic systems, mechanical repair, trucking industry, transportation equipment, shop technician, diesel repair support, vehicle inspection, trailer diagnostics. TEN (Transportation Equipment Network) is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Job Description We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 5 to 10 years' experience. Founded in 1977, C&C Lift Truck , Inc. has continuously grown over the last 49 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and currently service NY, NJ and Eastern PA. We are currently looking for an experience A Level Shop Technician to work in our Edison, NJ location. Our mechanics will be required to accurately diagnose and repair all company and customer equipment. C&C Offers: Union Pension Plan Medical, Dental, Vision benefits available Vacation Time Retirement Plan Opportunities Overtime Opportunities Competitive wages Supplemental Pay (bonus pay, commission pay, signing bonus) Primary Responsibilities: Assign and manage workload for other shop technicians Assist junior technicians with complex repairs Job will require IC forklift repairs, including: Complex diagnostic on all makes and models Large repairs, such as transmission overhauls, engine rebuilds, replacements, etc. Diagnostic and repair of fuel systems (Gas, LPG, & Diesel) Electric forklift repairs Diagnosis of complex wiring issues Battery and charger diagnostic and repair Hydraulic system repairs Brake and steer axle system repairs Complete scheduled PM and repair assignments within the time frame allotted Use diagnostic tools to test forklift components Perform quality inspections on junior technicians' repairs and services. Skills Required: Prior foreman or management experience The ability to stand and walk for long periods of time Computer proficient, with history of working with digital workorder systems and computer diagnostic tools. Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job Employee must be able to communicate effectively with management, customers, and other employees Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks Employee must be able to analyze information and write a diagnosis on work orders The ability to decipher different colors Must be able to work individually and as a team Qualifications: Prefer 3 or more years' experience as a heavy equipment mechanic or related mechanic jobs Strong mechanical aptitude and troubleshooting skills Deadline and detail-oriented Ability to lift 50 lbs. Willingness to learn Ability to thrive in a fast-paced environment Schedule: 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to undergo a criminal, drug screening and motor vehicle background check. Company Description Founded in 1977, C&C Lift Truck, Inc. has continuously grown over the last 49 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience-level forklift mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. Company Description Founded in 1977, C&C Lift Truck, Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience-level forklift mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment.