Job Description Aramark Facilities is hiring a skilled HVAC Maintenance Technician to support a single-site campus in Alamance County, NC, with pay ranging from $25?$30/hour. In this role, you?ll perform daily preventative maintenance and repairs on commercial HVAC systems, including chillers, cooling towers, and condensing units, while monitoring Building Automation Systems (BAS). You?ll troubleshoot equipment issues, respond to service calls, and help keep systems running safely and efficiently. This is a steady, full-time Monday?Friday position (7:00 AM?3:30 PM) with minimal overtime and occasional on-call needs. You?ll work alongside an experienced senior technician and gain exposure to large-scale mechanical systems not typically found in residential work. This is a great opportunity for an experienced HVAC technician looking to build skills in commercial maintenance and controls. COMPENSATION: The hourly rate for this position is $25.00 to $30.00 . If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here Aramark Careers - Benefits & Compensation . There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law, including, but not limited to, the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and the San Francisco Fair Chance Ordinance to the extent that those laws apply to the opportunity. Job Responsibilities Perform preventative maintenance on commercial HVAC systems including chillers, cooling towers, condensing units, and air handling equipment Inspect, troubleshoot, and repair heating, ventilation, air conditioning, and refrigeration systems Monitor and adjust Building Automation Systems (BAS) to ensure proper system performance Respond to service calls and resolve HVAC issues quickly and safely Check, clean, and replace filters; maintain ducts, ventilation systems, and mechanical components Calibrate and maintain HVAC controls and related equipment Complete maintenance logs, preventative maintenance schedules, and work orders Maintain tools, parts inventory, and equipment needed for daily operations Follow safety procedures and work with electrical and mechanical systems safely Work closely with a senior HVAC technician and support ongoing system improvements At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications Required: 3?5+ years of hands-on HVAC maintenance and troubleshooting experience (commercial or industrial preferred) EPA Universal Certification (required) Strong knowledge of HVAC systems, mechanical equipment, and safety practices Experience working with large systems such as chillers, cooling towers, or similar equipment Ability to work independently and solve problems in the field Valid driver?s license Availability for Monday?Friday, 7:00 AM?3:30 PM schedule with occasional on-call or overtime Ability to lift, bend, climb, and work in mechanical rooms or outdoor conditions Preferred: HVAC certification or technical training credentials Experience with Building Automation Systems (BAS) or HVAC controls Background in commercial campuses, manufacturing, or industrial facilities Experience with preventative maintenance programs and documentation About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook , Instagram and Twitter .
07/26/2026
Full time
Job Description Aramark Facilities is hiring a skilled HVAC Maintenance Technician to support a single-site campus in Alamance County, NC, with pay ranging from $25?$30/hour. In this role, you?ll perform daily preventative maintenance and repairs on commercial HVAC systems, including chillers, cooling towers, and condensing units, while monitoring Building Automation Systems (BAS). You?ll troubleshoot equipment issues, respond to service calls, and help keep systems running safely and efficiently. This is a steady, full-time Monday?Friday position (7:00 AM?3:30 PM) with minimal overtime and occasional on-call needs. You?ll work alongside an experienced senior technician and gain exposure to large-scale mechanical systems not typically found in residential work. This is a great opportunity for an experienced HVAC technician looking to build skills in commercial maintenance and controls. COMPENSATION: The hourly rate for this position is $25.00 to $30.00 . If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here Aramark Careers - Benefits & Compensation . There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law, including, but not limited to, the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and the San Francisco Fair Chance Ordinance to the extent that those laws apply to the opportunity. Job Responsibilities Perform preventative maintenance on commercial HVAC systems including chillers, cooling towers, condensing units, and air handling equipment Inspect, troubleshoot, and repair heating, ventilation, air conditioning, and refrigeration systems Monitor and adjust Building Automation Systems (BAS) to ensure proper system performance Respond to service calls and resolve HVAC issues quickly and safely Check, clean, and replace filters; maintain ducts, ventilation systems, and mechanical components Calibrate and maintain HVAC controls and related equipment Complete maintenance logs, preventative maintenance schedules, and work orders Maintain tools, parts inventory, and equipment needed for daily operations Follow safety procedures and work with electrical and mechanical systems safely Work closely with a senior HVAC technician and support ongoing system improvements At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications Required: 3?5+ years of hands-on HVAC maintenance and troubleshooting experience (commercial or industrial preferred) EPA Universal Certification (required) Strong knowledge of HVAC systems, mechanical equipment, and safety practices Experience working with large systems such as chillers, cooling towers, or similar equipment Ability to work independently and solve problems in the field Valid driver?s license Availability for Monday?Friday, 7:00 AM?3:30 PM schedule with occasional on-call or overtime Ability to lift, bend, climb, and work in mechanical rooms or outdoor conditions Preferred: HVAC certification or technical training credentials Experience with Building Automation Systems (BAS) or HVAC controls Background in commercial campuses, manufacturing, or industrial facilities Experience with preventative maintenance programs and documentation About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook , Instagram and Twitter .
Job Description Join Intel and build a better tomorrow. Intel is in the midst of an exciting transformation, with a vision to create and extend computing technology to connect and enrich the lives of every person on Earth. Our high-volume manufacturing facility in Chandler, Arizona is looking for amazing talent. Join and help us create the next generation of technologies that will shape the future for decades to come. The Ocotillo Technology Fabrication (OTF) Module Engineer role is multifaceted. The ideal candidate will have a passion for instrumentation and equipment with the goal of developing a robust manufacturable process module. Job Responsibilities: Strong understanding of TEL CLEAN TRACK / LITHIUS Pro V coat-develop track operation, including wafer flow, FOUP handling, transfer robotics, spin coat, develop, bake, chill, HMDS, EBR, backside rinse, and dispense modules Working knowledge of lithography track processes such as resist coating, adhesion promotion, post-apply bake, post-exposure bake, development, defect control, CD / uniformity impacts, and process window sensitivity Ability to troubleshoot tool and process issues using alarms, equipment logs, recipe settings, wafer history, SPC charts, metrology feedback, and defect / excursion data Hands-on experience with preventive maintenance, module recovery, nozzle / dispense checks, robot and wafer transfer issues, thermal module performance, exhaust / drain systems, and chemical delivery concerns Familiarity with safety and compliance expectations, including chemical handling, LOTO, gas and liquid line controls, cleanroom protocol, and escalation discipline Demonstrated ability to lead and align a team of senior engineers, set technical direction, prioritize critical issues, mentor others, and drive accountability for timely execution and measurable results Experience with working with chem suppliers and managing supply and demand Owns critical high volume manufacturing equipment and processes that enable rapid device miniaturization and the mass production of integrated circuits Conducts tests and measurements of their operations to ensure control over critical dimensions and defectivity of the process line Recommends and implements modifications for operating the equipment in order to improve production efficiencies, manufacturing techniques and optimizing production output for existing products, to meet safety, quality and cost indicator goals Grows in-situ manufacturing capacity to high volumes to demonstrate the technology capability while simultaneously transferring the technology to counterparts in manufacturing sites across the globe Owns execution of maintenance and repair activities for equipment and relevant module of components Initiates and owns the continuous improvement of equipment and process for key performance indicators (e.g., safety, quality, cost, productivity, defects, and yield) and works with equipment suppliers as required Owns process development line items aligned to high volume process nodes Participates in the transfer of technology to other sites through training and audit of installation and qualification outcomes to ensure matched processing across sites Owns development and optimization of excursion prevention systems for the equipment and process Owns detection of discrepant material or activities of the equipment and process During factory ramps, owns equipment install/conversion and qualification to ensure tools are installed safely and on schedule, while meeting all quality/matching criteria (from design through Safety Level 1 and Safety Level Supplier milestones, Intel qual and manufacturing readiness processes) Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. Requirements listed would be obtained through a combination of industry relevant job experience, internship experiences and or schoolwork/classes/research. Minimum Qualifications: Bachelor's degree in Electrical Engineering, Chemistry, Chemical Engineering, Mechanical or related engineering STEM field with 4+ years of experience OR Master's degree in Electrical Engineering, Chemistry, Chemical Engineering, Mechanical or related engineering STEM field with 3+ years of experience OR PhD degree in Electrical Engineering, Chemistry, Chemical Engineering, Mechanical or related engineering STEM field with 6+ months of experience The experience mentioned above should be in the following: Semiconductor Engineering experience Experience supporting high-volume manufacturing ramps and technology transfers Preferred Qualifications: Experience working in a semiconductor Foundry or OSAT (Outsourced Semiconductor Assembly and Test) company preferred Experience working in a semiconductor factory as a technician or engineer prior to Engineering role Statistics and experimental design; and the skills to apply that knowledge to tool matching, tool qualification, and process development Technical and troubleshooting experience For information on Intel's immigration sponsorship guidelines, please see Intel U.S. Immigration Sponsorship Information Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. Benefits We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here. Annual Salary Range for jobs which could be performed in the US $116,100.00-$163,800.00 Salary range dependent on a number of factors including location and experience Working Model This role will require an on-site presence. Job posting details (such as work model, location or time type) are subject to change.
07/26/2026
Full time
Job Description Join Intel and build a better tomorrow. Intel is in the midst of an exciting transformation, with a vision to create and extend computing technology to connect and enrich the lives of every person on Earth. Our high-volume manufacturing facility in Chandler, Arizona is looking for amazing talent. Join and help us create the next generation of technologies that will shape the future for decades to come. The Ocotillo Technology Fabrication (OTF) Module Engineer role is multifaceted. The ideal candidate will have a passion for instrumentation and equipment with the goal of developing a robust manufacturable process module. Job Responsibilities: Strong understanding of TEL CLEAN TRACK / LITHIUS Pro V coat-develop track operation, including wafer flow, FOUP handling, transfer robotics, spin coat, develop, bake, chill, HMDS, EBR, backside rinse, and dispense modules Working knowledge of lithography track processes such as resist coating, adhesion promotion, post-apply bake, post-exposure bake, development, defect control, CD / uniformity impacts, and process window sensitivity Ability to troubleshoot tool and process issues using alarms, equipment logs, recipe settings, wafer history, SPC charts, metrology feedback, and defect / excursion data Hands-on experience with preventive maintenance, module recovery, nozzle / dispense checks, robot and wafer transfer issues, thermal module performance, exhaust / drain systems, and chemical delivery concerns Familiarity with safety and compliance expectations, including chemical handling, LOTO, gas and liquid line controls, cleanroom protocol, and escalation discipline Demonstrated ability to lead and align a team of senior engineers, set technical direction, prioritize critical issues, mentor others, and drive accountability for timely execution and measurable results Experience with working with chem suppliers and managing supply and demand Owns critical high volume manufacturing equipment and processes that enable rapid device miniaturization and the mass production of integrated circuits Conducts tests and measurements of their operations to ensure control over critical dimensions and defectivity of the process line Recommends and implements modifications for operating the equipment in order to improve production efficiencies, manufacturing techniques and optimizing production output for existing products, to meet safety, quality and cost indicator goals Grows in-situ manufacturing capacity to high volumes to demonstrate the technology capability while simultaneously transferring the technology to counterparts in manufacturing sites across the globe Owns execution of maintenance and repair activities for equipment and relevant module of components Initiates and owns the continuous improvement of equipment and process for key performance indicators (e.g., safety, quality, cost, productivity, defects, and yield) and works with equipment suppliers as required Owns process development line items aligned to high volume process nodes Participates in the transfer of technology to other sites through training and audit of installation and qualification outcomes to ensure matched processing across sites Owns development and optimization of excursion prevention systems for the equipment and process Owns detection of discrepant material or activities of the equipment and process During factory ramps, owns equipment install/conversion and qualification to ensure tools are installed safely and on schedule, while meeting all quality/matching criteria (from design through Safety Level 1 and Safety Level Supplier milestones, Intel qual and manufacturing readiness processes) Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. Requirements listed would be obtained through a combination of industry relevant job experience, internship experiences and or schoolwork/classes/research. Minimum Qualifications: Bachelor's degree in Electrical Engineering, Chemistry, Chemical Engineering, Mechanical or related engineering STEM field with 4+ years of experience OR Master's degree in Electrical Engineering, Chemistry, Chemical Engineering, Mechanical or related engineering STEM field with 3+ years of experience OR PhD degree in Electrical Engineering, Chemistry, Chemical Engineering, Mechanical or related engineering STEM field with 6+ months of experience The experience mentioned above should be in the following: Semiconductor Engineering experience Experience supporting high-volume manufacturing ramps and technology transfers Preferred Qualifications: Experience working in a semiconductor Foundry or OSAT (Outsourced Semiconductor Assembly and Test) company preferred Experience working in a semiconductor factory as a technician or engineer prior to Engineering role Statistics and experimental design; and the skills to apply that knowledge to tool matching, tool qualification, and process development Technical and troubleshooting experience For information on Intel's immigration sponsorship guidelines, please see Intel U.S. Immigration Sponsorship Information Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. Benefits We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here. Annual Salary Range for jobs which could be performed in the US $116,100.00-$163,800.00 Salary range dependent on a number of factors including location and experience Working Model This role will require an on-site presence. Job posting details (such as work model, location or time type) are subject to change.
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
07/26/2026
Full time
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
07/26/2026
Full time
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
07/26/2026
Full time
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
07/26/2026
Full time
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
07/26/2026
Full time
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
07/26/2026
Full time
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
07/26/2026
Full time
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
07/26/2026
Full time
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
07/26/2026
Full time
The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. Schedule: Full-Time Monday-Friday, 8:00 AM - 5:00 PM Pay range: $25.00 - 28.00/hour, depending on experience. To be successful in the role, you would have: 4+ years of previous experience in building maintenance/construction, or any equivalent experience required. Certification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferred High school diploma or equivalent Current & valid Drivers' License Availability that includes evenings and some weekends A day in the life might include: Schedules work order requests adhering to priorities; Schedules and performs the maintenance of units and public spaces; Completes all unit repairs, completes move-in inspections, schedules unit refurbishing by outside vendors, including painting, re-carpeting, etc; supervises activities of outside contractors, ensuring quality of work performed and adherence to established project specifications; Performs the maintenance of grounds, building, parking lots, sprinkler systems, and fences and facilities; Performs electrical work such as a repairing and replacing switches, receptacles, lights, and motors; Performs plumbing installations and/or repairs such as repairing leaks, running new lines and plumbing fixtures, installing water heaters and commodes, repairing pipes, replacing valves, unclogging drains, and installing filters; Secures or arranges for availability of necessary work orders, materials, equipment, tools, parts, and permits; Participates in preventative maintenance program; Cleans carpet and vinyl floor covering surfaces; Establishes and maintains necessary procedure manuals and records; Oversees safety practices of contractors, vendors, tenants, and guests on site; Instructs contractors on work prior to commencing projects; Inspects work upon completion of assigned tasks; May assume command as detailed in the Disaster Plan in the event of a disaster; Attends in-service training workshops and meetings as required; Conducts work tasks safely and in compliance with the facility safety program; Strips, seals, waxes and buffs floor surfaces and performs floor maintenance; cleans and shampoos carpets; Ensure common areas are clean, including public restrooms, elevators, offices, public rooms, resident lounges; dusts, sanitizes and scrubs; Empties trash receptacles; may deposit recyclable material in proper receptacles; picks up trash and keeps exterior perimeter clean; Takes note of safety concerns and needed repairs; performs repairs or reports to supervisor; Identifies and assesses problems and communicates to Administrator; Participates in on-call emergency schedule; Maintains accurate records. Provides effective and courteous service to all residents, guests, and co-workers; Performs related essential duties as required. What's in it for you? At HumanGood, we're driven by purpose-reimagining senior living and creating communities where older adults can thrive. When you join us, you're part of something bigger, making a meaningful impact in the lives of residents every day. Build your future where you're supported - you'll have the total rewards you need to build a confident, secure life for you and your family. Count on a compensation package that maximizes your health, wealth and well-being. And adds up to 40% in value to your base compensation. We offer a comprehensive range of benefits and perks to support you, including : Health, Dental and Vision Plans- start the 1st of the month following your start date 20 days of paid time off (increases with years of service), plus 7 company holidays 401(k) with up to 4% employer match and no waiting on funds to vest HSA option with employer contribution Tuition Reimbursement and continuing education programs $25/line unlimited cell phone plan (plus taxes and fees) Cell Phone Stipend 5-star employer-paid employee assistance program Please Note: Benefit eligibility is determined by employment status and regularly scheduled hours. As team members support residents, HumanGood supports team members. Here, you'll have the benefits and compensation you need to build a secure life for your family, and real opportunities to grow in your career, gain leadership skills and develop personally. Join us. You'll make a difference by helping our team members and our residents realize their full human potential. Learn more at Come see what HumanGood has to offer! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
B-Level Auto Technician $20-$30/HR Flexible Pay Miller Motor Company is hiring a skilled B-Level Automotive Technician who wants consistent work, competitive pay, and a shop that values quality technicians. If you enjoy inspections, general repair, drivability concerns, and expanding your diagnostic skills while working on a variety of vehicles, this is an excellent opportunity to join a busy independent shop with a supportive team and plenty of room to grow. Why Join Miller Motor Company? $20-$30/hour based on experience Flexible hybrid pay structure Monday-Friday schedule: 8:00 AM-5:00 PM 75% employer-paid medical insurance 3% retirement match Paid holidays and PTO/sick time ASE reimbursement Uniform shirts provided Employee parts discount through the onsite Carquest store Toolbox relocation assistance may be available Clean, organized shop with modern equipment No parts ordering responsibilities How to Apply (Important) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. About the Shop Miller Motor Company is a busy independent repair shop in Centre Hall, PA, servicing Domestic, European, Asian, and light fleet vehicles. You'll gain experience working on a wide variety of repairs instead of performing the same repetitive work every day. Our shop features 7 bays, 4 lifts plus a 4-post alignment lift, Tekmetric shop management software, Steer CRM, Autel and Snap-on scan tools, and an onsite Carquest parts department that keeps workflow moving efficiently. You'll work alongside an experienced team, including a Shop Manager who is also an A-Level Technician and is available to help when needed. What You'll Do Perform general automotive repairs and maintenance Complete vehicle inspections Diagnose and repair drivability concerns Assist with light diagnostics and electrical repairs Perform brake, suspension, steering, and engine repairs Work on Domestic, European, Asian, and light fleet vehicles Use Autel and Snap-on diagnostic equipment Work with Tekmetric DVI Collaborate with the service advisor, parts department, and shop manager Focus on repairing vehicles while the dedicated parts team handles parts sourcing Required Qualifications 3+ years of recent professional automotive technician experience Solid general repair and maintenance experience Basic diagnostic and drivability troubleshooting skills Valid driver's license Pennsylvania Inspection and Emissions Licenses Ability to work on Domestic, European, and Asian vehicles Ability to work independently and as part of a team Preferred Qualifications Independent repair shop experience ASE Certifications Experience using Tekmetric or another DVI/shop management system (training available) Experience using Autel or Snap-on scan tools Why Techs Like Working Here You'll have the support, equipment, and consistent workflow needed to succeed. Our onsite Carquest parts department, modern diagnostic equipment, and experienced leadership allow technicians to stay productive without unnecessary delays. This is an excellent opportunity for a B-Level Technician who wants to sharpen their skills, earn competitive pay, and build a long-term career in a professional independent repair shop. If you're looking for a shop where your work is appreciated and your career can continue to grow, we'd love to hear from you. If this sounds like the right fit, apply today or call our AI recruiter, Paige, at to complete your quick phone interview and receive priority consideration.
07/25/2026
Full time
B-Level Auto Technician $20-$30/HR Flexible Pay Miller Motor Company is hiring a skilled B-Level Automotive Technician who wants consistent work, competitive pay, and a shop that values quality technicians. If you enjoy inspections, general repair, drivability concerns, and expanding your diagnostic skills while working on a variety of vehicles, this is an excellent opportunity to join a busy independent shop with a supportive team and plenty of room to grow. Why Join Miller Motor Company? $20-$30/hour based on experience Flexible hybrid pay structure Monday-Friday schedule: 8:00 AM-5:00 PM 75% employer-paid medical insurance 3% retirement match Paid holidays and PTO/sick time ASE reimbursement Uniform shirts provided Employee parts discount through the onsite Carquest store Toolbox relocation assistance may be available Clean, organized shop with modern equipment No parts ordering responsibilities How to Apply (Important) We move fast - and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant "Paige" (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. About the Shop Miller Motor Company is a busy independent repair shop in Centre Hall, PA, servicing Domestic, European, Asian, and light fleet vehicles. You'll gain experience working on a wide variety of repairs instead of performing the same repetitive work every day. Our shop features 7 bays, 4 lifts plus a 4-post alignment lift, Tekmetric shop management software, Steer CRM, Autel and Snap-on scan tools, and an onsite Carquest parts department that keeps workflow moving efficiently. You'll work alongside an experienced team, including a Shop Manager who is also an A-Level Technician and is available to help when needed. What You'll Do Perform general automotive repairs and maintenance Complete vehicle inspections Diagnose and repair drivability concerns Assist with light diagnostics and electrical repairs Perform brake, suspension, steering, and engine repairs Work on Domestic, European, Asian, and light fleet vehicles Use Autel and Snap-on diagnostic equipment Work with Tekmetric DVI Collaborate with the service advisor, parts department, and shop manager Focus on repairing vehicles while the dedicated parts team handles parts sourcing Required Qualifications 3+ years of recent professional automotive technician experience Solid general repair and maintenance experience Basic diagnostic and drivability troubleshooting skills Valid driver's license Pennsylvania Inspection and Emissions Licenses Ability to work on Domestic, European, and Asian vehicles Ability to work independently and as part of a team Preferred Qualifications Independent repair shop experience ASE Certifications Experience using Tekmetric or another DVI/shop management system (training available) Experience using Autel or Snap-on scan tools Why Techs Like Working Here You'll have the support, equipment, and consistent workflow needed to succeed. Our onsite Carquest parts department, modern diagnostic equipment, and experienced leadership allow technicians to stay productive without unnecessary delays. This is an excellent opportunity for a B-Level Technician who wants to sharpen their skills, earn competitive pay, and build a long-term career in a professional independent repair shop. If you're looking for a shop where your work is appreciated and your career can continue to grow, we'd love to hear from you. If this sounds like the right fit, apply today or call our AI recruiter, Paige, at to complete your quick phone interview and receive priority consideration.
Job Description POSITION: Industrial Maintenance Technician DEPARTMENT: Maintenance LOCATION: Flower Mound, Texas REPORTS TO: Maintenance Manager SHIFT: Night Shift STATUS: Level 4 Long term reliability and mentor Technician GENERAL PURPOSE This position will perform industrial maintenance and repairs for assigned equipment and facilities while providing value by safely and efficiently supporting the production team DUTIES AND RESPONSIBILITIES: Maintain, troubleshoot, PM, and repair equipment in assigned area with no guidance needed Interview, provide feedback and mentorship for prospected team members throughout the onboarding process through the completion of their probationary period providing weekly updates to the maintenance supervisor on their progress. Champion assigned asset category and any other equipment assigned working closely with OEM using reliability centered maintenance as a focus and root cause analysis, FIIX data and planning / scheduling to effectively improve overall asset reliability. Use root cause analysis tools such as 5 whys, fishbone diagram or failure mode and effect analysis (FMEA) Use FIIX CMMS to specifically dive into data and root cause analysis. Lead others in 5S methodology in all areas of maintenance including but not limited to our tool box and storage areas, parts room, shop tables and all assets in the shop. Have an audit ready 24/7 mentality and ensure that all other tech levels are mentored in that way. Understand and know the departmental goal as they are updated annually by quarter, as well as the leading and lag indicators that are measured and applied and how each one impact the main goal of improving reliability. Train and mentor others specifically around troubleshooting and following processes using learn lab assets as well as assets offline to create training work orders and assign to technicians to perform corrections showing their work. Provide and track feedback for continuous improvement. Maintain open and accurate communication with other maintenance employees as well as supervision. Complete all assigned work orders completely and accurately documenting all prudent information describing the completion of the work order. Complete FIIX documentation entry as dictated by maintenance tasks, repairs, and PMs. Perform technical maintenance tasks under close supervision. Provide all information necessary to maintain proper parts inventories. Work with outside contractors to complete projects and improvements wherever possible. Maintain all facility grounds and services. Perform all work in a safe manner following all Company safety policies and procedures. Other duties and responsibilities as needed. SKILLS AND ABILITIES: High School Diploma or , and 10 years experience in a maintenance occupation in a manufacturing environment; or equivalent combination of education and experience sufficient to successfully perform the essential duties. Ability to train and develop others using training assets as well as instruction on rebuilds, repairs and PM of all assets assigned by maintenance leadership. Programming of VFD Understanding Digital Logic Systems Understanding Process Measurement Understanding and knowledge of PLC's Knowledge of single & three phase motors Reading Schematics Strong knowledge of transformers & Circuits Reading blueprints Rigging skills Strong knowledge of electricity up to 480V Working knowledge of every energy source for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.). Ability to maintain plant utilities (lighting, water systems, drain systems, etc.). Ability to work independently. Be able to measure, cut, thread, and join stainless, black iron, plastic, and copper piping. Strong understanding of various diagnostic equipment including but not limited to ohms meter, voltage meters, etc. basic knowledge and understanding of power equipment to include cut-off saws, demo-saws, drills, etc. 30-hour OSHA Training Thoroughly understand and follow all OSHA and Company regulations as they relate to the maintenance field (LOTO, NFPA70E, CSE, PPE, etc.). Complete understanding of critical FIIX procedures and requirements and be able to enter and populate computerized tracking systems. Strong written and verbal skills. Completion of Level III Assessment Training. (Required) The above statements are intended to describe the general nature of the position and may not include all of the duties required of the position. MI Windows and Doors, LLC is an EEO employer and values diversity. What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.
07/25/2026
Full time
Job Description POSITION: Industrial Maintenance Technician DEPARTMENT: Maintenance LOCATION: Flower Mound, Texas REPORTS TO: Maintenance Manager SHIFT: Night Shift STATUS: Level 4 Long term reliability and mentor Technician GENERAL PURPOSE This position will perform industrial maintenance and repairs for assigned equipment and facilities while providing value by safely and efficiently supporting the production team DUTIES AND RESPONSIBILITIES: Maintain, troubleshoot, PM, and repair equipment in assigned area with no guidance needed Interview, provide feedback and mentorship for prospected team members throughout the onboarding process through the completion of their probationary period providing weekly updates to the maintenance supervisor on their progress. Champion assigned asset category and any other equipment assigned working closely with OEM using reliability centered maintenance as a focus and root cause analysis, FIIX data and planning / scheduling to effectively improve overall asset reliability. Use root cause analysis tools such as 5 whys, fishbone diagram or failure mode and effect analysis (FMEA) Use FIIX CMMS to specifically dive into data and root cause analysis. Lead others in 5S methodology in all areas of maintenance including but not limited to our tool box and storage areas, parts room, shop tables and all assets in the shop. Have an audit ready 24/7 mentality and ensure that all other tech levels are mentored in that way. Understand and know the departmental goal as they are updated annually by quarter, as well as the leading and lag indicators that are measured and applied and how each one impact the main goal of improving reliability. Train and mentor others specifically around troubleshooting and following processes using learn lab assets as well as assets offline to create training work orders and assign to technicians to perform corrections showing their work. Provide and track feedback for continuous improvement. Maintain open and accurate communication with other maintenance employees as well as supervision. Complete all assigned work orders completely and accurately documenting all prudent information describing the completion of the work order. Complete FIIX documentation entry as dictated by maintenance tasks, repairs, and PMs. Perform technical maintenance tasks under close supervision. Provide all information necessary to maintain proper parts inventories. Work with outside contractors to complete projects and improvements wherever possible. Maintain all facility grounds and services. Perform all work in a safe manner following all Company safety policies and procedures. Other duties and responsibilities as needed. SKILLS AND ABILITIES: High School Diploma or , and 10 years experience in a maintenance occupation in a manufacturing environment; or equivalent combination of education and experience sufficient to successfully perform the essential duties. Ability to train and develop others using training assets as well as instruction on rebuilds, repairs and PM of all assets assigned by maintenance leadership. Programming of VFD Understanding Digital Logic Systems Understanding Process Measurement Understanding and knowledge of PLC's Knowledge of single & three phase motors Reading Schematics Strong knowledge of transformers & Circuits Reading blueprints Rigging skills Strong knowledge of electricity up to 480V Working knowledge of every energy source for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.). Ability to maintain plant utilities (lighting, water systems, drain systems, etc.). Ability to work independently. Be able to measure, cut, thread, and join stainless, black iron, plastic, and copper piping. Strong understanding of various diagnostic equipment including but not limited to ohms meter, voltage meters, etc. basic knowledge and understanding of power equipment to include cut-off saws, demo-saws, drills, etc. 30-hour OSHA Training Thoroughly understand and follow all OSHA and Company regulations as they relate to the maintenance field (LOTO, NFPA70E, CSE, PPE, etc.). Complete understanding of critical FIIX procedures and requirements and be able to enter and populate computerized tracking systems. Strong written and verbal skills. Completion of Level III Assessment Training. (Required) The above statements are intended to describe the general nature of the position and may not include all of the duties required of the position. MI Windows and Doors, LLC is an EEO employer and values diversity. What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.
About J4 Commercial Services J4 Commercial Services (J4) is a family-owned equipment service company dedicated to supporting the automotive repair and collision-repair industry. Founded on the principles of integrity, craftsmanship, and doing right by people, J4 has grown from a small, regional operation into a multi-state service provider supporting MSOs (Multi-Shop Operators) across the country. We specialize in the sales, installation, maintenance, and repair of critical shop equipment, including: Air Compressors (rotary screw, vane, reciprocating, scroll) Compressed Air Treatment (dryers, filtration, drains) Automotive Lifts Hose Reels, Accessories, and General Shop Equipment From our headquarters in Keene, Texas, we serve customers nationwide and currently operate in 14 states, with continued expansion planned to meet the demand of national MSO partners. Our Culture & Values J4 is built on a simple philosophy: Take care of our employees, and they will take care of our customers. We prioritize: Honesty and ethics in every interaction Employee safety and well-being High-quality workmanship Reliable service and communication Long-term partnerships with customers and vendors Every employee-whether in the field, office, warehouse, or leadership-plays a critical role in our success. We operate as one team, united by a shared commitment to professionalism, respect, and continuous improvement. Our Mission To provide the most reliable, ethical, and high-quality equipment service experience in the industry while supporting our employees with a culture that values growth, accountability, and integrity. Our Vision To become the industry leader in nationwide MSO equipment service by building strong teams, standardizing our systems, and consistently delivering exceptional results for our customers. J4 Commercial Services is seeking an experienced Air Compressor Service Technician with hands-on expertise in Rotary Screw and Reciprocating air compressors . Experience with Rotary Vane, Scroll Compressors, Medical Air, or Vacuum Pumps is a major plus! Sign-On Bonus: We are currently offering a sign-on bonus for technicians with a minimum of 2 years' experience in air compressor service and troubleshooting. We are a fast-growing, family-owned company with a strong reputation for putting our employees first. Our team is driven by a shared mission: improving the productivity and performance of our clients through expert service and support. If you're passionate about mechanical systems and customer satisfaction, this is the place for you. What You'll Do: Perform preventative maintenance and routine service on rotary screw and reciprocating air compressors. Troubleshoot and repair mechanical and electrical issues. Service additional equipment, including automotive lifts, air dryers, and compressed air filtration systems. Communicate clearly with customers and our back office regarding job status, parts needed, and follow-up visits. Maintain detailed and accurate service records. Manage a dynamic schedule within your assigned territory. Travel frequently (50%+ expected); most weekends are spent at home, and extended trips rarely exceed two weeks. What We're Looking For: 2+ years of experience in servicing air compressors (preferred). Familiarity with rotary vane, scroll compressors, medical air, or vacuum systems is highly valued. Mechanical aptitude and comfort using tools and test equipment. Strong troubleshooting skills with both electrical and mechanical systems. Excellent communication and time management skills. A willingness to travel. Experience in facilities maintenance or similar industries is a plus-but we're willing to train the right candidate. Why Join J4? Competitive pay + sign-on bonus Family-owned with a people-first culture Opportunities for relocation as we expand across states Diverse service offerings and room for growth Equal opportunity employer with a commitment to training and certification Apply today and join a team that takes pride in getting the job done right. Know someone in another state? We're expanding and may have opportunities near them too! The pay range for this role is: 18 - 40 USD per hour(Atlanta, Georgia) 18 - 40 USD per hour(Charlotte, North Carolina) 18 - 40 USD per hour(Tampa, Florida) 18 - 40 USD per hour(Nashville, Tennessee) 18 - 40 USD per hour(Keene, Texas) 18 - 40 USD per hour(Orlando, FL) 18 - 40 USD per hour(Miami, FL) 18 - 40 USD per hour(Fort Myers, FL) 18 - 40 USD per hour(San Antonio, TX) PI721b22545d7b-6947
07/25/2026
Full time
About J4 Commercial Services J4 Commercial Services (J4) is a family-owned equipment service company dedicated to supporting the automotive repair and collision-repair industry. Founded on the principles of integrity, craftsmanship, and doing right by people, J4 has grown from a small, regional operation into a multi-state service provider supporting MSOs (Multi-Shop Operators) across the country. We specialize in the sales, installation, maintenance, and repair of critical shop equipment, including: Air Compressors (rotary screw, vane, reciprocating, scroll) Compressed Air Treatment (dryers, filtration, drains) Automotive Lifts Hose Reels, Accessories, and General Shop Equipment From our headquarters in Keene, Texas, we serve customers nationwide and currently operate in 14 states, with continued expansion planned to meet the demand of national MSO partners. Our Culture & Values J4 is built on a simple philosophy: Take care of our employees, and they will take care of our customers. We prioritize: Honesty and ethics in every interaction Employee safety and well-being High-quality workmanship Reliable service and communication Long-term partnerships with customers and vendors Every employee-whether in the field, office, warehouse, or leadership-plays a critical role in our success. We operate as one team, united by a shared commitment to professionalism, respect, and continuous improvement. Our Mission To provide the most reliable, ethical, and high-quality equipment service experience in the industry while supporting our employees with a culture that values growth, accountability, and integrity. Our Vision To become the industry leader in nationwide MSO equipment service by building strong teams, standardizing our systems, and consistently delivering exceptional results for our customers. J4 Commercial Services is seeking an experienced Air Compressor Service Technician with hands-on expertise in Rotary Screw and Reciprocating air compressors . Experience with Rotary Vane, Scroll Compressors, Medical Air, or Vacuum Pumps is a major plus! Sign-On Bonus: We are currently offering a sign-on bonus for technicians with a minimum of 2 years' experience in air compressor service and troubleshooting. We are a fast-growing, family-owned company with a strong reputation for putting our employees first. Our team is driven by a shared mission: improving the productivity and performance of our clients through expert service and support. If you're passionate about mechanical systems and customer satisfaction, this is the place for you. What You'll Do: Perform preventative maintenance and routine service on rotary screw and reciprocating air compressors. Troubleshoot and repair mechanical and electrical issues. Service additional equipment, including automotive lifts, air dryers, and compressed air filtration systems. Communicate clearly with customers and our back office regarding job status, parts needed, and follow-up visits. Maintain detailed and accurate service records. Manage a dynamic schedule within your assigned territory. Travel frequently (50%+ expected); most weekends are spent at home, and extended trips rarely exceed two weeks. What We're Looking For: 2+ years of experience in servicing air compressors (preferred). Familiarity with rotary vane, scroll compressors, medical air, or vacuum systems is highly valued. Mechanical aptitude and comfort using tools and test equipment. Strong troubleshooting skills with both electrical and mechanical systems. Excellent communication and time management skills. A willingness to travel. Experience in facilities maintenance or similar industries is a plus-but we're willing to train the right candidate. Why Join J4? Competitive pay + sign-on bonus Family-owned with a people-first culture Opportunities for relocation as we expand across states Diverse service offerings and room for growth Equal opportunity employer with a commitment to training and certification Apply today and join a team that takes pride in getting the job done right. Know someone in another state? We're expanding and may have opportunities near them too! The pay range for this role is: 18 - 40 USD per hour(Atlanta, Georgia) 18 - 40 USD per hour(Charlotte, North Carolina) 18 - 40 USD per hour(Tampa, Florida) 18 - 40 USD per hour(Nashville, Tennessee) 18 - 40 USD per hour(Keene, Texas) 18 - 40 USD per hour(Orlando, FL) 18 - 40 USD per hour(Miami, FL) 18 - 40 USD per hour(Fort Myers, FL) 18 - 40 USD per hour(San Antonio, TX) PI721b22545d7b-6947
Job Description Job Description POSITION OVERVIEW: Reporting to the Field Manager, the Welder/Pipefitter provides welding, fabricating, and fitting services for boiler repairs and assembly with a focus on sound welds for steam and gas systems. As part of the Service Team, this role also participates in mechanical work such as millwrighting, pump change outs, opening boilers, pipe fitting and general labor. In this role, you will be responsible for creating a positive relationship with customers as you professionally support the maintenance, repair and installation of commercial and industrial equipment in the Sioux City IA. area. WHY JOIN US? We are growing! Competitive compensation package, variable pay Retirement Savings Plan with Employer matching 2x employee contribution up to 4% of earnings Co-pay Benefit Plan that includes coverage for employee, life insurance, AD&D, Short and long term disability, hospital, prescription drugs, healthcare and dental care Diverse customer sectors and experience -> continuous learning opportunity Professionally managed with a friendly culture Experienced and highly dedicated office support team Team approach with strong customer service orientation POSITION REQUIREMENTS: Welding and Fabricating Main Activities: Engage in welding tasks on boiler components following manufacturer-provided templates and retrofitting parts as needed. Pipe welder/code welder - some training provided Fabricate parts as needed. Perform pressure tests on pressure vessel welds. Complete weld preparation by grinding or cutting. Weld following all gas metal arc, shielded metal arc, or gas tungsten arc welding procedures and processes. Assess equipment, structures, materials and job specifications for appropriate welding positions and methods. Clean weld utilizing grinders and/or wire wheels as necessary. Provide support for mechanical millwrighting, pump change outs, opening boilers, and pipe fitting. Identify potential issues and hazards as proactively as possible. Perform general labor, as needed. Submit daily work orders including parts used out of inventory, time spent on job, and work performed. Other duties as required. Customer Service Main Activities: Develop and maintain good customer relationships and represent and promote Plains Mechanical in a professional manner Build relationships with customers so that they are comfortable with work recommendations and confident in the services being performed. Keep customers updated throughout the troubleshooting and repair process. Meet with the customer after each service visit to ensure they are satisfied with the job performed and to make proactive recommendations for future work. Other duties as required. Safety and Professionalism Main Activities: Employ a safety-first mindset and contribute to a safe environment daily. Fully participate in all required training sessions related to position. Provide professional feedback on received training and maintain an awareness of any expiry dates related to training requirements. Support and train new or less experienced colleagues on various welding processes as required. Ensure compliance with all safety training, policies, practices and procedures and consistently apply on the job to create a safe work environment. Monitor work environment for hazards and maintain healthy ventilation levels to avoid particle or gas inhalation. Ensure proper use of personal protective equipment and the maintenance of engineered controls (e.g. guards). Report any potential hazards (e.g. faulty equipment) or potentially hazardous conditions to management immediately. Ensure good housekeeping in all workspaces. Other duties as required. TRAINING, EXPERIENCE AND QUALIFICATIONS : Welding Certification - we are willing to train the right candidate. Must pass visual - 6G fixed position 6010 root 7018 fill and cover pass. Strong mechanical aptitude with experience in pipe fitting and fabrication. Knowledge of industrial boiler systems. Ability to confidently use applicable tools and machinery. Knowledge of ASME Code. Valid E Driver's License to travel to customer sites. CORE VALUES, COMPETENCIES AND CHARACTERISITCS: Exceptional attention to detail with a strong focus on safety. The ability to read and understand technical documents, safety rules, blueprints, manuals, and related documents. Basic mathematical skills. A thorough knowledge of welding techniques and related tools. Customer service ability. Time management skills. About us Plains Mechanical Services is a full-service boiler company providing sales, service installation, and repair of boilers, pressure vessels, piping systems, and industrial combustion applications. With over two decades of experience since our founding in 1994, we specialize in full-service boiler, burner, and boiler room installation, maintenance, and repair services for all steam and hydronic systems, fuel and process piping installations, and industrial combustion applications. We are the only one-stop-shop for boiler room equipment sales, service, and rentals in the area. Our reputation is built on delivering exceptional customer service, and we attribute this to our valued product partners, knowledgeable staff, and dedicated field service team. We serve businesses in Iowa, South Dakota, Nebraska, and Minnesota, and take pride in being a trusted partner for all your boiler room needs. We are a Thermogenics company. The Company provides best-in-class parts and 24/7 service support delivered via highly trained technicians and manages a fleet of unique rental equipment to serve temporary or emergency needs. The product portfolio is primarily used for industrial, commercial and institutional applications across North America. Thermogenics is a leading manufacturer of coiled tube steam, hot water and thermal fluid boilers and related equipment. With its comprehensive product and service offering, Thermogenics functions as a one-stop shop for all of its customers' most complex steam and heating requirements. The Company operates from its head office in Aurora, ON and maintains sales and service operations in Cincinnati, OH, Hartford, CT, Jacksonville, FL, Orlando, FL., Ottawa, ON and Sioux City IA. Location: Sioux City, IA Job Type: Full-time Pay: $30.00 - $40.00 per hour Benefits: 401(k) matching Employee assistance program Referral program Tuition reimbursement Schedule: 8 hour shift Supplemental pay types: Bonus opportunities Work Location: In person
07/24/2026
Full time
Job Description Job Description POSITION OVERVIEW: Reporting to the Field Manager, the Welder/Pipefitter provides welding, fabricating, and fitting services for boiler repairs and assembly with a focus on sound welds for steam and gas systems. As part of the Service Team, this role also participates in mechanical work such as millwrighting, pump change outs, opening boilers, pipe fitting and general labor. In this role, you will be responsible for creating a positive relationship with customers as you professionally support the maintenance, repair and installation of commercial and industrial equipment in the Sioux City IA. area. WHY JOIN US? We are growing! Competitive compensation package, variable pay Retirement Savings Plan with Employer matching 2x employee contribution up to 4% of earnings Co-pay Benefit Plan that includes coverage for employee, life insurance, AD&D, Short and long term disability, hospital, prescription drugs, healthcare and dental care Diverse customer sectors and experience -> continuous learning opportunity Professionally managed with a friendly culture Experienced and highly dedicated office support team Team approach with strong customer service orientation POSITION REQUIREMENTS: Welding and Fabricating Main Activities: Engage in welding tasks on boiler components following manufacturer-provided templates and retrofitting parts as needed. Pipe welder/code welder - some training provided Fabricate parts as needed. Perform pressure tests on pressure vessel welds. Complete weld preparation by grinding or cutting. Weld following all gas metal arc, shielded metal arc, or gas tungsten arc welding procedures and processes. Assess equipment, structures, materials and job specifications for appropriate welding positions and methods. Clean weld utilizing grinders and/or wire wheels as necessary. Provide support for mechanical millwrighting, pump change outs, opening boilers, and pipe fitting. Identify potential issues and hazards as proactively as possible. Perform general labor, as needed. Submit daily work orders including parts used out of inventory, time spent on job, and work performed. Other duties as required. Customer Service Main Activities: Develop and maintain good customer relationships and represent and promote Plains Mechanical in a professional manner Build relationships with customers so that they are comfortable with work recommendations and confident in the services being performed. Keep customers updated throughout the troubleshooting and repair process. Meet with the customer after each service visit to ensure they are satisfied with the job performed and to make proactive recommendations for future work. Other duties as required. Safety and Professionalism Main Activities: Employ a safety-first mindset and contribute to a safe environment daily. Fully participate in all required training sessions related to position. Provide professional feedback on received training and maintain an awareness of any expiry dates related to training requirements. Support and train new or less experienced colleagues on various welding processes as required. Ensure compliance with all safety training, policies, practices and procedures and consistently apply on the job to create a safe work environment. Monitor work environment for hazards and maintain healthy ventilation levels to avoid particle or gas inhalation. Ensure proper use of personal protective equipment and the maintenance of engineered controls (e.g. guards). Report any potential hazards (e.g. faulty equipment) or potentially hazardous conditions to management immediately. Ensure good housekeeping in all workspaces. Other duties as required. TRAINING, EXPERIENCE AND QUALIFICATIONS : Welding Certification - we are willing to train the right candidate. Must pass visual - 6G fixed position 6010 root 7018 fill and cover pass. Strong mechanical aptitude with experience in pipe fitting and fabrication. Knowledge of industrial boiler systems. Ability to confidently use applicable tools and machinery. Knowledge of ASME Code. Valid E Driver's License to travel to customer sites. CORE VALUES, COMPETENCIES AND CHARACTERISITCS: Exceptional attention to detail with a strong focus on safety. The ability to read and understand technical documents, safety rules, blueprints, manuals, and related documents. Basic mathematical skills. A thorough knowledge of welding techniques and related tools. Customer service ability. Time management skills. About us Plains Mechanical Services is a full-service boiler company providing sales, service installation, and repair of boilers, pressure vessels, piping systems, and industrial combustion applications. With over two decades of experience since our founding in 1994, we specialize in full-service boiler, burner, and boiler room installation, maintenance, and repair services for all steam and hydronic systems, fuel and process piping installations, and industrial combustion applications. We are the only one-stop-shop for boiler room equipment sales, service, and rentals in the area. Our reputation is built on delivering exceptional customer service, and we attribute this to our valued product partners, knowledgeable staff, and dedicated field service team. We serve businesses in Iowa, South Dakota, Nebraska, and Minnesota, and take pride in being a trusted partner for all your boiler room needs. We are a Thermogenics company. The Company provides best-in-class parts and 24/7 service support delivered via highly trained technicians and manages a fleet of unique rental equipment to serve temporary or emergency needs. The product portfolio is primarily used for industrial, commercial and institutional applications across North America. Thermogenics is a leading manufacturer of coiled tube steam, hot water and thermal fluid boilers and related equipment. With its comprehensive product and service offering, Thermogenics functions as a one-stop shop for all of its customers' most complex steam and heating requirements. The Company operates from its head office in Aurora, ON and maintains sales and service operations in Cincinnati, OH, Hartford, CT, Jacksonville, FL, Orlando, FL., Ottawa, ON and Sioux City IA. Location: Sioux City, IA Job Type: Full-time Pay: $30.00 - $40.00 per hour Benefits: 401(k) matching Employee assistance program Referral program Tuition reimbursement Schedule: 8 hour shift Supplemental pay types: Bonus opportunities Work Location: In person
Job Description Job Description Are you ready to jump into the world of Power Generation? Look no further because we're hiring Generator Technician Trainees ! This full-time opportunity is a perfect starting point for anyone with a passion for mechanics and electricity. You'll be part of a 9-week program where you'll get hands-on experience, classroom-style learning, and mentorship from our experienced technician trainee staff and on-the-job mentors. Once you've completed our training program, you'll have the opportunity to be promoted to a Technician Level C and continue your growth and development. At Nixon, we seek team members who come in with a Positive Attitude, Accountability, Customer focus, Competitiveness, and a Team Player mentality (our core values). If you exhibit PACCT, then we want to hear from you! Openings available at the following locations: Atlanta, GA Charlotte, NC Jackson, MS New Orleans, LA What You'll Be Doing: Participate in hands-on and classroom-style training activities. Assist Technicians in testing, preventative maintenance, and repairs. Follow safety requirements, including proper use of PPE. Document all work and repairs in a clean and concise manner. Carry out instructions given in written, oral, or diagram form. Safely drive a service vehicle (No CDL required). Other duties as assigned. What We're Looking for : High school diploma or GED certificate. Interest in mechanics, electrical work, or engines. Ability to travel and stay out of town during the program, up to two weeks at a time. Ability to follow instructions and work well with supervision. Ability to problem solve and make logical decisions. Good communication skills, both written and verbal. Excellent time management and organizational skills. Clean driving record. Physical Demands While performing the duties of the job, the team member is regularly required to: Use hands/fingers handle or feel. Reach with hands and arms. Stand, walk, sit, climb, balance, stoop, kneel, crouch and crawl. Lift and/or move up to 50 lbs. (and occasionally up to 100 lb.team lifts) Be exposed to moving mechanical parts; fumes or airborne particles; outside weather conditions (extreme heat and cold) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
07/23/2026
Full time
Job Description Job Description Are you ready to jump into the world of Power Generation? Look no further because we're hiring Generator Technician Trainees ! This full-time opportunity is a perfect starting point for anyone with a passion for mechanics and electricity. You'll be part of a 9-week program where you'll get hands-on experience, classroom-style learning, and mentorship from our experienced technician trainee staff and on-the-job mentors. Once you've completed our training program, you'll have the opportunity to be promoted to a Technician Level C and continue your growth and development. At Nixon, we seek team members who come in with a Positive Attitude, Accountability, Customer focus, Competitiveness, and a Team Player mentality (our core values). If you exhibit PACCT, then we want to hear from you! Openings available at the following locations: Atlanta, GA Charlotte, NC Jackson, MS New Orleans, LA What You'll Be Doing: Participate in hands-on and classroom-style training activities. Assist Technicians in testing, preventative maintenance, and repairs. Follow safety requirements, including proper use of PPE. Document all work and repairs in a clean and concise manner. Carry out instructions given in written, oral, or diagram form. Safely drive a service vehicle (No CDL required). Other duties as assigned. What We're Looking for : High school diploma or GED certificate. Interest in mechanics, electrical work, or engines. Ability to travel and stay out of town during the program, up to two weeks at a time. Ability to follow instructions and work well with supervision. Ability to problem solve and make logical decisions. Good communication skills, both written and verbal. Excellent time management and organizational skills. Clean driving record. Physical Demands While performing the duties of the job, the team member is regularly required to: Use hands/fingers handle or feel. Reach with hands and arms. Stand, walk, sit, climb, balance, stoop, kneel, crouch and crawl. Lift and/or move up to 50 lbs. (and occasionally up to 100 lb.team lifts) Be exposed to moving mechanical parts; fumes or airborne particles; outside weather conditions (extreme heat and cold) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
Job Description Job Description Are you ready to jump into the world of Power Generation? Look no further because we're hiring Generator Technician Trainees ! This full-time opportunity is a perfect starting point for anyone with a passion for mechanics and electricity. You'll be part of a 9-week program where you'll get hands-on experience, classroom-style learning, and mentorship from our experienced technician trainee staff and on-the-job mentors. Once you've completed our training program, you'll have the opportunity to be promoted to a Technician Level C and continue your growth and development. At Nixon, we seek team members who come in with a Positive Attitude, Accountability, Customer focus, Competitiveness, and a Team Player mentality (our core values). If you exhibit PACCT, then we want to hear from you! Openings available at the following locations: Atlanta, GA Charlotte, NC Jackson, MS New Orleans, LA What You'll Be Doing: Participate in hands-on and classroom-style training activities. Assist Technicians in testing, preventative maintenance, and repairs. Follow safety requirements, including proper use of PPE. Document all work and repairs in a clean and concise manner. Carry out instructions given in written, oral, or diagram form. Safely drive a service vehicle (No CDL required). Other duties as assigned. What We're Looking for : High school diploma or GED certificate. Interest in mechanics, electrical work, or engines. Ability to travel and stay out of town during the program, up to two weeks at a time. Ability to follow instructions and work well with supervision. Ability to problem solve and make logical decisions. Good communication skills, both written and verbal. Excellent time management and organizational skills. Clean driving record. Physical Demands While performing the duties of the job, the team member is regularly required to: Use hands/fingers handle or feel. Reach with hands and arms. Stand, walk, sit, climb, balance, stoop, kneel, crouch and crawl. Lift and/or move up to 50 lbs. (and occasionally up to 100 lb.team lifts) Be exposed to moving mechanical parts; fumes or airborne particles; outside weather conditions (extreme heat and cold) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
07/23/2026
Full time
Job Description Job Description Are you ready to jump into the world of Power Generation? Look no further because we're hiring Generator Technician Trainees ! This full-time opportunity is a perfect starting point for anyone with a passion for mechanics and electricity. You'll be part of a 9-week program where you'll get hands-on experience, classroom-style learning, and mentorship from our experienced technician trainee staff and on-the-job mentors. Once you've completed our training program, you'll have the opportunity to be promoted to a Technician Level C and continue your growth and development. At Nixon, we seek team members who come in with a Positive Attitude, Accountability, Customer focus, Competitiveness, and a Team Player mentality (our core values). If you exhibit PACCT, then we want to hear from you! Openings available at the following locations: Atlanta, GA Charlotte, NC Jackson, MS New Orleans, LA What You'll Be Doing: Participate in hands-on and classroom-style training activities. Assist Technicians in testing, preventative maintenance, and repairs. Follow safety requirements, including proper use of PPE. Document all work and repairs in a clean and concise manner. Carry out instructions given in written, oral, or diagram form. Safely drive a service vehicle (No CDL required). Other duties as assigned. What We're Looking for : High school diploma or GED certificate. Interest in mechanics, electrical work, or engines. Ability to travel and stay out of town during the program, up to two weeks at a time. Ability to follow instructions and work well with supervision. Ability to problem solve and make logical decisions. Good communication skills, both written and verbal. Excellent time management and organizational skills. Clean driving record. Physical Demands While performing the duties of the job, the team member is regularly required to: Use hands/fingers handle or feel. Reach with hands and arms. Stand, walk, sit, climb, balance, stoop, kneel, crouch and crawl. Lift and/or move up to 50 lbs. (and occasionally up to 100 lb.team lifts) Be exposed to moving mechanical parts; fumes or airborne particles; outside weather conditions (extreme heat and cold) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
Description: ABOUT US G&H is a world leader in optical designing, testing and manufacturing. As experts in the technology of light, G&H works with customers to provide optical systems, assemblies, and components for demanding applications. Headquartered in Ilminster Somerset, UK with primary operations in the USA and Europe, G&H is recognized for the breadth of their acousto-optic, electro-optic, crystal-optic, fiber optic, and precision optic products. G&H is recognized as the preferred source for OEMs in the life sciences, industrial, and aerospace and defense industries, with a history of quality and excellence that dates back over seventy-five years. ROLE The successful candidate will be responsible for providing support and qualifying in-process production parts for manufacturing, ensuring adherence to test protocols and procedures. You will collaborate closely with production process technicians to maintain consistent and acceptable yields and work toward continuous improvement across production processes. RESPONSIBILITIES & PERFORMANCE MEASURES Perform in process, final, and receiving inspections on optical, mechanical, and electronic components per approved work instructions, drawings, and CTQ criteria. Collaborate with production process technicians to initiate and maintain a process for producing parts with consistent and acceptable yields. Perform Process Compliance Audits to ensure conformance to company procedures. Perform dimensional measurements using manual/hand gauges (calipers, micrometers, etc.). Perform visual inspections of optical parts per MIL PRF-13830B to identify non-conformance according to documented parameters. Perform final inspections both in-process (where applicable) and as a standalone operation. Identify, contain, and correctly tag nonconforming material; create NCR/DMR entries with defect codes, photos, and evidence. Document inspection results electronically into Excel-based inspection files. Align goals with the company's core values: customer focus, integrity, action, unity, and precision. Continuously raise individual performance to proactively address problem-solving and continuous improvement. QUALIFICATIONS & SKILLS High school diploma required, associate degree preferred. 1-3 years of experience in precision manufacturing, optics, electronics, or metrology. Ability to interpret mechanical and optical drawings, CTQs, and specifications. Strong attention to detail and the ability to follow documented work instructions. Ability to operate manual and computer-controlled inspection equipment. Ability to stand for extended periods and lift up to 40 lbs; cleanroom discipline as needed. Excellent communication skills, including the ability to document inspection results clearly. Strong problem-solving skills and a proactive attitude toward continuous improvement. Comfortable collaborating in a cross-functional, fast-changing environment. Notes: This job description is not intended to be exhaustive in every respect, but rather to clearly define the fundamental purpose, responsibilities and dimensions for the role. Therefore, this job description does not describe any individual role holder. In addition to the contents of this job description, employees are expected to undertake all other reasonable and related tasks allocated by their line manager. The Company is committed to providing equal employment opportunities for all employees and applicants for employment. The Company does not discriminate in employment opportunity or practices on the grounds of gender, race, religion or belief, age, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by national laws under which the Company operates. In the instance that the position will involve having access to items and technical data that may be controlled under U.S. export laws and regulations ("U.S. Export Control Laws"), including but not limited to the Export Administration Regulations ("EAR") and the International Traffic in Arms Regulations ("ITAR"). To comply with the U.S. Export Control Laws, and in conjunction with the review of candidates for those positions within G&H that may present access to export-controlled technical data, G&H must assess whether candidates are "U.S. persons" as defined under the EAR (15 C.F.R. Part 772) and the ITAR (22 C.F.R. 120.15). Certain questions asked during the application process are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this position. Requirements: PI31e44f17c5-
07/22/2026
Full time
Description: ABOUT US G&H is a world leader in optical designing, testing and manufacturing. As experts in the technology of light, G&H works with customers to provide optical systems, assemblies, and components for demanding applications. Headquartered in Ilminster Somerset, UK with primary operations in the USA and Europe, G&H is recognized for the breadth of their acousto-optic, electro-optic, crystal-optic, fiber optic, and precision optic products. G&H is recognized as the preferred source for OEMs in the life sciences, industrial, and aerospace and defense industries, with a history of quality and excellence that dates back over seventy-five years. ROLE The successful candidate will be responsible for providing support and qualifying in-process production parts for manufacturing, ensuring adherence to test protocols and procedures. You will collaborate closely with production process technicians to maintain consistent and acceptable yields and work toward continuous improvement across production processes. RESPONSIBILITIES & PERFORMANCE MEASURES Perform in process, final, and receiving inspections on optical, mechanical, and electronic components per approved work instructions, drawings, and CTQ criteria. Collaborate with production process technicians to initiate and maintain a process for producing parts with consistent and acceptable yields. Perform Process Compliance Audits to ensure conformance to company procedures. Perform dimensional measurements using manual/hand gauges (calipers, micrometers, etc.). Perform visual inspections of optical parts per MIL PRF-13830B to identify non-conformance according to documented parameters. Perform final inspections both in-process (where applicable) and as a standalone operation. Identify, contain, and correctly tag nonconforming material; create NCR/DMR entries with defect codes, photos, and evidence. Document inspection results electronically into Excel-based inspection files. Align goals with the company's core values: customer focus, integrity, action, unity, and precision. Continuously raise individual performance to proactively address problem-solving and continuous improvement. QUALIFICATIONS & SKILLS High school diploma required, associate degree preferred. 1-3 years of experience in precision manufacturing, optics, electronics, or metrology. Ability to interpret mechanical and optical drawings, CTQs, and specifications. Strong attention to detail and the ability to follow documented work instructions. Ability to operate manual and computer-controlled inspection equipment. Ability to stand for extended periods and lift up to 40 lbs; cleanroom discipline as needed. Excellent communication skills, including the ability to document inspection results clearly. Strong problem-solving skills and a proactive attitude toward continuous improvement. Comfortable collaborating in a cross-functional, fast-changing environment. Notes: This job description is not intended to be exhaustive in every respect, but rather to clearly define the fundamental purpose, responsibilities and dimensions for the role. Therefore, this job description does not describe any individual role holder. In addition to the contents of this job description, employees are expected to undertake all other reasonable and related tasks allocated by their line manager. The Company is committed to providing equal employment opportunities for all employees and applicants for employment. The Company does not discriminate in employment opportunity or practices on the grounds of gender, race, religion or belief, age, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by national laws under which the Company operates. In the instance that the position will involve having access to items and technical data that may be controlled under U.S. export laws and regulations ("U.S. Export Control Laws"), including but not limited to the Export Administration Regulations ("EAR") and the International Traffic in Arms Regulations ("ITAR"). To comply with the U.S. Export Control Laws, and in conjunction with the review of candidates for those positions within G&H that may present access to export-controlled technical data, G&H must assess whether candidates are "U.S. persons" as defined under the EAR (15 C.F.R. Part 772) and the ITAR (22 C.F.R. 120.15). Certain questions asked during the application process are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this position. Requirements: PI31e44f17c5-
Boothe Heating, Air, Plumbing and Drains
Hollywood, Maryland
Overview: HVAC Apprentice - Get Paid to Learn a Skilled Trade! Looking for a career with hands-on training, great pay, and room to grow? Boothe's Heating, Air, Plumbing & Electrical is looking for motivated HVAC Apprentices to join our growing team. This is your chance to start a career in HVAC while earning a paycheck - you'll work alongside experienced technicians, gain on-the-job training, and receive the support you need to earn your certifications and grow into a skilled professional. Why You'll Love Working at Boothe's Competitive Pay: $15 - $18/hour (based on experience) plus performance bonuses Generous Time Off: 2 weeks PTO + 7 paid holidays (including your birthday!) Comprehensive Benefits: 50% company-paid health, dental, and vision insurance Retirement: 401(k) with company match On-the-Job Training: Learn from skilled HVAC techs and gain licensing support Uniforms Provided: Cleaned and serviced for you Positive Work Culture: Collaborative, energetic, and team-oriented environment Responsibilities: What You'll Do Learn to perform maintenance, repairs, and installations for residential and light-commercial HVAC systems Work with air conditioners, furnaces, packaged units, ductwork, thermostats, zoning systems, filters, and wiring Safely use tools, gauges, and equipment necessary to complete tasks Keep company vehicle clean, organized, and stocked with tools/parts Deliver excellent customer service and represent Boothe's with professionalism Follow safety protocols and all local/national codes Grow your skills every day through shadowing, training, and hands-on experience Qualifications: What We're Looking For License: Apprentice license required (must have by start date) Certification: EPA Certification preferred (we can help you get it) Mindset: Willingness to learn, mechanical aptitude, and strong work ethic Physical Ability: Able to climb ladders, crawl in tight spaces, and work in attics, crawl spaces, or rooftops Soft Skills: Positive attitude, customer service focus, attention to detail Requirements: Valid driver's license, clean driving record, background check, and drug screen Start Your HVAC Career Today This is more than just a job - it's the first step in a career path with great earning potential and long-term stability. If you're motivated to learn, work hard, and grow with a company that invests in its people, apply now and start building your future with Boothe's. Wrench Group and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The company encourages all qualified candidates who are eligible to work in the United States to apply, but it does not sponsor applicants or employees who require a visa to work legally.
07/18/2026
Full time
Overview: HVAC Apprentice - Get Paid to Learn a Skilled Trade! Looking for a career with hands-on training, great pay, and room to grow? Boothe's Heating, Air, Plumbing & Electrical is looking for motivated HVAC Apprentices to join our growing team. This is your chance to start a career in HVAC while earning a paycheck - you'll work alongside experienced technicians, gain on-the-job training, and receive the support you need to earn your certifications and grow into a skilled professional. Why You'll Love Working at Boothe's Competitive Pay: $15 - $18/hour (based on experience) plus performance bonuses Generous Time Off: 2 weeks PTO + 7 paid holidays (including your birthday!) Comprehensive Benefits: 50% company-paid health, dental, and vision insurance Retirement: 401(k) with company match On-the-Job Training: Learn from skilled HVAC techs and gain licensing support Uniforms Provided: Cleaned and serviced for you Positive Work Culture: Collaborative, energetic, and team-oriented environment Responsibilities: What You'll Do Learn to perform maintenance, repairs, and installations for residential and light-commercial HVAC systems Work with air conditioners, furnaces, packaged units, ductwork, thermostats, zoning systems, filters, and wiring Safely use tools, gauges, and equipment necessary to complete tasks Keep company vehicle clean, organized, and stocked with tools/parts Deliver excellent customer service and represent Boothe's with professionalism Follow safety protocols and all local/national codes Grow your skills every day through shadowing, training, and hands-on experience Qualifications: What We're Looking For License: Apprentice license required (must have by start date) Certification: EPA Certification preferred (we can help you get it) Mindset: Willingness to learn, mechanical aptitude, and strong work ethic Physical Ability: Able to climb ladders, crawl in tight spaces, and work in attics, crawl spaces, or rooftops Soft Skills: Positive attitude, customer service focus, attention to detail Requirements: Valid driver's license, clean driving record, background check, and drug screen Start Your HVAC Career Today This is more than just a job - it's the first step in a career path with great earning potential and long-term stability. If you're motivated to learn, work hard, and grow with a company that invests in its people, apply now and start building your future with Boothe's. Wrench Group and its affiliates are proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, genetic information, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The company encourages all qualified candidates who are eligible to work in the United States to apply, but it does not sponsor applicants or employees who require a visa to work legally.
NORTHEAST AERO COMPRESSOR CORP
Hauppauge, New York
Description: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination - while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2-5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects • Strong communication and customer service skills when responding to occupant requests • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures • Manual dexterity and ability to constantly manipulate small to medium components • Ability to stand, walk, bend, and climb stairs for extended periods • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred • Valid state driver's license with a clean driving record required • Forklift certification preferred, or ability to obtain within 30 days of hire • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28-$34 per hour, commensurate with experience, skills, and certifications • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians • Medical, dental, vision, and life insurance options • 401(k) with 100% match on the first 4% • Paid holidays, vacation, and sick/personal leave accrued from date of hire • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities Compensation details: 28-34 Hourly Wage PI78033b3a5ca4-5392
07/16/2026
Full time
Description: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination - while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2-5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects • Strong communication and customer service skills when responding to occupant requests • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures • Manual dexterity and ability to constantly manipulate small to medium components • Ability to stand, walk, bend, and climb stairs for extended periods • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred • Valid state driver's license with a clean driving record required • Forklift certification preferred, or ability to obtain within 30 days of hire • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28-$34 per hour, commensurate with experience, skills, and certifications • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians • Medical, dental, vision, and life insurance options • 401(k) with 100% match on the first 4% • Paid holidays, vacation, and sick/personal leave accrued from date of hire • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities Compensation details: 28-34 Hourly Wage PI78033b3a5ca4-5392
