40 jobs found

Job Description Job Description NW Houston Area Full-Time 2 Openings Established manufacturing company in NW Houston is seeking experienced Machinist II professionals for two 2nd shift openings supporting VTL and Milling operations. These are hands-on machining roles working with large industrial components in a fast-paced production environment. We are looking for candidates with strong machining experience who can work independently, read complex blueprints, perform setups, and maintain tight tolerances with minimal supervision. Position Overview Depending on experience and shop needs, candidates may work primarily on: Vertical Turret Lathe (VTL) equipment machining large components Manual Horizontal/Vertical Mills CNC Milling equipment This is not an entry-level machine operator role. Ideal candidates will have prior experience in a manufacturing or heavy industrial environment such as oil & gas, power generation, heavy equipment, or automation/controls. Responsibilities Machine parts and large components to specification using VTL, manual mills, and/or CNC milling equipment Read and interpret blueprints, technical drawings, and routing instructions Perform dimensional inspections and verify tolerances using precision measuring instruments Load, align, secure, and set tooling, fixtures, vises, chucks, and materials Adjust feeds, speeds, offsets, and tooling during machining operations Perform deburring, stamping, and quality checks on finished parts Operate overhead cranes, forklifts, pallet jacks, and lifting devices safely Maintain accurate production documentation and computer entries Maintain clean and safe work areas including chip removal and housekeeping Follow all PPE, safety, and machining guard requirements Work independently with little to no guidance, including machine setup Required Qualifications High School Diploma or GED Minimum 2+ years of machining experience operating manual and/or CNC milling equipment or VTL machinery Strong blueprint reading and layout experience Advanced knowledge of precision measuring tools including: Micrometers Dial & Vernier calipers Indicators Depth gauges ID/OD measuring tools Experience working with tight tolerances and surface finish requirements Comfortable working around large industrial components and heavy materials Ability to lift 40+ pounds and perform prolonged standing, bending, kneeling, pushing, and pulling Ability to work overtime, weekends, and holidays as needed Must be able to work 2nd Shift Preferred Qualifications Experience in oil & gas, heavy equipment, power generation, or industrial manufacturing Forklift, crane, and pallet jack certification Vo-Tech or machining trade school certification Strong mechanical aptitude and troubleshooting ability What We're Looking For Self-sufficient machinists who require minimal supervision Candidates with strong attention to detail and safety awareness Team players who take pride in quality workmanship and maintaining production standards If you have solid machining experience and are looking for a stable opportunity with a well-established company in NW Houston, we encourage you to apply. HOUNW35 Company Description About Burnett Specialists Burnett Specialists is a top-ranked, 100% employee-owned recruiting firm with over 50 years of expertise in connecting top talent with exceptional companies. Headquartered in Texas, we specialize in placing professionals in Accounting, IT, HR, Marketing, Engineering, Sales, Legal, Supply Chain, and Administrative roles across major cities, including Houston, Austin, Dallas, San Antonio, and El Paso. With a proven track record of responsiveness, cost savings, and full-spectrum staffing solutions - from temporary and temp-to-hire to payrolling and direct hire placements - we are committed to exceeding expectations and delivering unparalleled results. As a Woman-Owned Business Enterprise (WBE), we take pride in building long-term relationships with our clients and candidates while fostering integrity, professionalism, and community involvement. Visit us at: Follow us on LinkedIn, Facebook, and Instagram for the latest job opportunities and industry insights! Company Description About Burnett Specialists Burnett Specialists is a top-ranked, 100% employee-owned recruiting firm with over 50 years of expertise in connecting top talent with exceptional companies. Headquartered in Texas, we specialize in placing professionals in Accounting, IT, HR, Marketing, Engineering, Sales, Legal, Supply Chain, and Administrative roles across major cities, including Houston, Austin, Dallas, San Antonio, and El Paso. With a proven track record of responsiveness, cost savings, and full-spectrum staffing solutions - from temporary and temp-to-hire to payrolling and direct hire placements - we are committed to exceeding expectations and delivering unparalleled results. As a Woman-Owned Business Enterprise (WBE), we take pride in building long-term relationships with our clients and candidates while fostering integrity, professionalism, and community involvement. Visit us at: Follow us on LinkedIn, Facebook, and Instagram for the latest job opportunities and industry insights!

Mechanical Assembler II (Manufacturing)Location: Sparks, NVJob Type: Full timeRequisition ID: JR100031RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV.Position SummaryThe Production Assembler 2 is primarily responsible for the installation and assembly of all compressor units using specified mechanical components, fabricated parts, and assembly hardware. The Production Assembler will use hand and power tools along with measuring instruments according to blueprints, sketches, schematics, and other visual aids. In addition, the Assembler will test the operation of assembled components to detect malfunctions. Assembler 2 may be responsible for assigned projects, areas, and work closely with the Production Supervisor. ResponsibilitiesProvide quality, on time assembly of compressors, generators, and associated parts and pieces. Assemble compressors and/or their subassemblies, according to customer's needs, following blueprints and other written and verbal specifications.Overhaul and repair used compressors or components as required to meet customer needs.To control the manufacturing expenses of the plant through the proper use of all supplies and equipment and the meeting of all labor standards.Provide packaging as required for products prior to shipping.Notify supervisor of adequate levels of supplies and tools for completion of assigned production.To ensure effective communication within the department and with all company functions.Adhere to all safety policies and practices.Maintain the plant facilities and equipment as directed. Misc. duties may include painting, general cleaning and basic building maintenance.Participate in cross training within the Production Department.Set up and test-run of completed machine through fixed test cycles. Independently set up and test for noise and vibration using test equipment. Overhauls and rebuilds machines and equipment.Regulate workload with planning, if necessary, back up supervisors in maintaining workloadProvide adequate information of scheduling accuracy while working with planning to complete and finish work orders in a timely manner.Perform functions on CSI relating to inventory issues, and/or closing out jobs. Correct and update documentation and any or all work instructions as necessary.Coordinate training of new employees to follow all processes and standards set by engineering or work instructions.Provide updates and implement improvement ideas regarding 5S, and efficiency opportunities.Maintain critical discussions and information with supervisors regarding key points of focus on work order demand and opportunities for improvement.Perform all other duties in the best interest of the company or as directed by the Production Supervisor and Plant Manager.Minimum QualificationsDegree from technical school or equivalent combination of education and work experience. 3- 5 years experience as a mechanical assembler or mechanic in any related field.Ability to read and understand structural drawing, schematics, and operating manuals. Valid Driver's License.Ability to perform calculations such as percentages, ratios, and fractions.Ability to learn basic computer skills and ability to adapt to a variety of software applications. Ability to understand the use and application of air and gas compressors and generators and basic manufacturing tooling and equipment.Ability to communicate with others to exchange information both orally and in writing.Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance.Preferred QualificationsAdvance course work in any Mechanical assembly discipline. Specific experience in the manufacture of air and gas compressors and generators.Physical Requirements 1. This position is regularly exposed to the following conditions:Manufacturing, warehouse and office environment.While working near moving equipment, mechanical parts and lift trucks; must have the ability to follow safe operating procedures.May be exposed to loud noise, fumes and/or toxic chemicals.2. Must have the following physical abilities:Ability to stoop, kneel, crouch, bend, stretch, reach, and lift.Ability to lift up to 50 pounds regularly.Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers.Compensation$24.00 per hour + DOEEqual OpportunityRIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations).About RIX IndustriesRIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture.Compensation details: 24-24 Hourly WagePI657a006f4df2-2693

Job Description Job Description CNC Programmer II (Mill) Full Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO) Job Type: Onsite Salary Range: $26.00 - $45.00, DOE Location: Valencia, CA. Fralock is an engineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science, Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locations located throughout Northern and Southern California. VISION To be recognized by our customers as a leading solutions provider of proprietary engineered advanced materials for high reliability, severe environment, and technically challenging applications. MISSION To create value, profitably grow, and share our success with all stakeholders. CULTURE Respect - We treat others the way they want to be treated. Integrity - We practice a high standard of ethics in our business dealings with customers, employees, and suppliers. Responsiveness - We have a sense of urgency in responding to internal and external requests, and work proactively to solve problems. Excellence/Competence - We empower our people to continuously improve and execute high quality work. Teamwork - We work together to achieve Fralock business objectives by communicating at a high level, by listening and having clarity in our expectations of one another. Individual Accountability and Personal Responsibility - We do what we have committed to do when we committed to doing it. Continuous Improvement across all segments of the company This position requires access to information controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), the successful candidate must be a "U.S. person" as defined in the ITAR and EAR (which generally means (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum, as specified under applicable law. Job Summary The CNC Programmer II is responsible for the creation of 3-axis Mill CAD/CAM programs and conversion of files from DXF and PDF formats on AutoCAD and NCCam software. The Programmer must be able to set up and run the CNC equipment to process jobs using a variety of materials, such as Q2, Cirlex, Graphfoil, and Copperfoil, while ensuring quality standards are met. Key Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform these essential functions. Under minimal supervision, must be able to perform a variety of job duties including, but not limited to: Create CAD/CAM programs and be able to convert the files from DXF and PDF formats. Create and organize programs and transfer files. Set up machines, operate multiple machining centers and equipment. Perform machine setups, including tooling selection, fixture loading, and program loading. Make machine adjustments, offsets, and tooling changes to maintain machining quality and efficiency. Troubleshoot machining, tooling, and production issues to minimize downtime and scrap. Optimize machining processes, including feeds, speeds, tooling, and setup strategies, to improve performance and throughput. Monitor machine performance and support continuous improvement initiatives related to quality, efficiency, and operational performance. Read and interpret blueprints, setup sheets, travelers, engineering drawings, and specifications Use precision measuring instruments to verify part conformance and maintain accurate quality documentation. Lead and conduct first article inspection and verify parts meet engineering specifications and quality standards. Collaborate with Quality, Engineer, and Operations teams to support production goals, tooling improvements, fixtures development, and continuous improvement efforts. Provide technical support, training, and mentorship to programmers, machinist and machine operators. Perform other related duties as assigned. Required Skills Advanced experience using programming software AutoCAD, NCCam, MasterCAM, or the like. Experience operating and/or setting up CNC Mill or manual machining equipment in a manufacturing environment. Ability to read and interpret blueprints, engineering drawings, and GD&T requirements. Experience using precision measuring instruments including micrometers, calipers, indicators, and height gages. Strong understanding of machining fundamentals, tooling, feeds, speeds, and offsets. Mechanical aptitude with strong attention to detail and commitment to quality. Ability to troubleshoot machining and production issues, while optimizing programs and machining efficiency. Ability to deal with and solve problems involving a few concrete variables in standardized situations. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Self-motivated with the ability to achieve results in a fast-paced environment. Ability to work independently and collaboratively in a team environment. Commitment to workplace safety and maintaining a clean work environment. Experience using Microsoft Suite. Preferred Skills Previous experience working on 3-spindle or 4-spindle milling equipment and/or CO2 laser machines. Previous experience working on ESI CNC Laser machines, digital cutters, or hybrid laser equipment. Previous experience working with Q2, Cirlex, Graphfoil, Copperfoil, or other specialty materials. Journeyman machinist experience. Education Requirements High School Degree or General Education Degree; or three (3) to five (5) years of related experience and/or training; or equivalent combination of education and experience. Mastercam or CNC programming certificate highly desired. Five (5) + years of CNC programming experience in a manufacturing environment. Five (5) to seven (7) years of 3-axis CNC operator in a manufacturing environment. Blueprint reading and/or GDT certificate desired. Physical Requirements Frequent use of hands for handling various sized components, tools, and controls. Ability to perform similar operations and tasks for 6-8 hours. Ability to sit and stand for 6 to 8 hours. Ability to lift up to 25 lbs. occasionally Ability to perform visual inspection to perform close-up inspection tasks for 4 to 6 hours. Working Conditions Work performed indoors in environmentally controlled and cleanroom environments. Required use of PPE including, safety glasses, and safety toed footwear. All offers of employment at Fralock are contingent upon clear results of a background check. Background checks may include some or all the following depending on job title and responsibilities: Social Security Verification Prior Employment Verification Criminal History Personal and Professional References Motor Vehicle Records Credit History Fralock provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Mechanical Assembler I (Manufacturing)Location: Sparks, NVJob Type: Full timeRequisition ID: JR100077RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV.The Production Assembler I is primarily responsible for the installation and assembly of all compressor units using specified mechanical components, fabricated parts and assembly hardware. The Production Assembler will use hand and power tools along with measuring instruments according to blueprints, sketches, schematics and other visual aids. In addition, the Assembler will test the operation of assembled components to detect malfunctions.ResponsibilitiesProvide quality, on time assembly of compressors, generators, and associated parts and pieces. Assemble compressors and/or their subassemblies, according to customer's needs, following blueprints and other written and verbal specifications.Overhaul and repair used compressors or components as required to meet customer needs.To control the manufacturing expenses of the plant through the proper use of all supplies and equipment and the meeting of all labor standards.Provide packaging as required for products prior to shipping.Notify supervisor of adequate levels of supplies and tools for completion of assigned production.To ensure effective communication within the department and with all company functions.Adhere to all safety policies and practices.Maintain the plant facilities and equipment as directed. Misc. duties may include painting, general cleaning and basic building maintenance.Participate in cross training within the Production Department.Set up and test-run of completed machine through fixed test cycles. Independently set up and test for noise and vibration using test equipment. Overhauls and rebuilds machines and equipment.Perform all other duties in the best interest of the company or as directed by the Production Supervisor and Plant Manager.All Other Duties as AssignedProduction Assembler 2 Responsibilities: Along with all responsibilities aboveRegulate workload with planning if necessary, back up supervisors in maintaining workloadProvide adequate information of scheduling accuracy while working with planning to complete and finish work orders in a timely mannerPerform functions on CSI relating to inventory issues, and/or closing out jobs. Minimum QualificationsDegree from technical school or equivalent combination of education and work experience. One year experience as a mechanical assembler or mechanic in any related field.Ability to read and understand structural drawing, schematics and operating manuals. Valid Driver's License.Ability to perform calculations such as percentages, ratios and fractions.Ability to learn basic computer skills and ability to adapt to a variety of software applications. Ability to understand the use and application of air and gas compressors and generators and basic manufacturing tooling and equipment.Ability to communicate with others to exchange information both orally and in writing.Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance.Preferred QualificationsAdvance course work in any Mechanical assembly discipline. Specific experience in the manufacture of air and gas compressors and generators.Physical Requirements & Work EnvironmentThis position is regularly exposed to the following conditions:Manufacturing, warehouse and office environmentsWhile working near moving equipment, mechanical parts and lift trucks; must have the ability to follow safe operating procedures.May be exposed to loud noise, fumes and/or toxic chemicals.Must have the following physical abilities:Ability to stoop, kneel, crouch, bend, stretch, reach, and lift.Ability to lift up to 50 pounds regularly.Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers.Compensation$21.00 per hour + DOEEqual OpportunityRIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations).About RIX IndustriesRIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture.PI2b0-

Date Posted: 2026-04-09 Country: United States of America Location: US-AZ-TUCSON- E Hermans Rd BLDG 805 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon is seeking a skilled mechanical engineer to support design and integration of different test environments. The individual will need to be familiar with designing using various tools (Autocad, Creo parametric, etc). What You Will Do: Work with various trades and designs for developmental programs within the Hardware-in-the-Loop (HWIL) organization. Perform system design and integration activities within HWIL facilities What You Will Learn: System level knowledge of developmental programs within HWIL. Advanced signal generation and presentation, across IF and RF test environments Experience working across multi-disciplined group of engineers. Qualifications You Must Have: Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 2 years of relevant experience, or An Advanced Degree in a related field Experience using design tools such as AutoCad or Creo Parametric Active and transferrable US government issued Secret security clearance (not interim) is required prior to start date. US citizenship is required, as only US citizens are eligible for a security clearance. Qualifications We Prefer: Strong organization, coordination, planning, teaming skills, as well as written and oral communication skills Existing SSBI clearance Experience with mechanical design and/or experience conducting data analysis Experience troubleshooting systems using test equipment such as oscilloscopes, logic analyzers, network analyzers, and/or spectrum analyzers Highly motivated individual with a positive attitude Able to work and interface with a cross-discipline team Knowledge of or experience with equipment rack assembly, cable assembly/installation, electronics maintenance Familiar with various communication interfaces such as RS-232, RS-485, Ethernet, CAN, 1553 Knowledge of or experience with software languages such as Java, C, C++, or similar languages; scripting languages such as Python and/or Perl, and MATLAB scripts for data analysis purposes What We Offer: Our values drive our actions, behaviors and performance with a vision for a safer, more connected world. At RTX we value Trust, Respect, Accountability, Collaboration and Innovation. Learn More & Apply Now Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility: YES Please consider the following role type definition as you apply for this role: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Location Information: This position is onsite at our campus in beautiful Tucson, AZ. Tucson has a friendly, caring, and laid-back atmosphere, combined with the innovation and energy of a metropolitan region, and recognized as one of America's 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature's best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round. Virtual Fly Over City of Tucson & Community, YouTube Video Links "Raytheon In Tucson": ,-az-location "Tucson is Awesome": "Winter in Tucson": . As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Description: Full-time in Needham, MA Bigbelly is seeking a Technical Product Manager to own the end-to-end lifecycle of our world-leading smart waste and recycling system. You will sit at the intersection of hardware engineering (solar power, compaction, sensors), embedded firmware, and our CLEAN cloud platform. Your mission is to ensure Bigbelly stations are not just bins, but highly efficient, data-driven assets that help municipalities and campuses reach their sustainability goals. This role is ideal for product managers who enjoy working with both physical products and connected technology. This role blends hardware product leadership with IoT connectivity, working closely with engineering, manufacturing, and software teams. You will work closely with our engineering and customer support teams in Needham, manufacturing operations in Methuen, and the sales team to manage our products from concept through production and field performance. Core Responsibilities Strategy & Vision: Defining the "why," "what," and "when" of the product, setting goals, and developing a strategic roadmap. Customer & Market Research: Conducting user interviews, analyzing market trends such as AI, and analyzing competitor products to identify opportunities. Prioritization & Backlog Management: Managing the product backlog, determining which features to build next, and making tough decisions between competing priorities. Cross-Functional Teamwork: Collaborating with design, engineering, sales, and marketing teams to ensure a smooth, cohesive product launch. Data Analysis & Iteration: Monitoring key performance indicators (KPIs) and user data to measure success and improve existing functionality. Communication: Serving as the product lead for communicating product updates, vision, and value to stakeholders and internal teams. For new products, writing user stories, user testing, and supporting product marketing activities Commercial: Working with internal teams to ensure timely and accurate product pricing is in place to support sales and business needs. Global: With roughly 50% of the company's products exported globally, monitor for changes in market requirements to stay ahead of any regulatory changes. Requirements: Education Bachelor's degree in mechanical engineering, Electrical Engineering, Systems Engineering, or a related technical field Experience 5+ years of product management experience, with a heavy focus on physical products. Experience supporting a hardware product lifecycle from concept through production and end-of-life Experience building pricing strategies for physical products Technical familiarity with mechanical devices, firmware, IoT communications, and cloud-based software Tools Skilled in the Microsoft Office suite, including strong proficiency in Excel and designing engaging PowerPoint presentations. Proficient in leveraging generative AI tools to streamline research and content creation Familiarity with hardware design processes and tools such as SolidWorks or similar CAD environments Familiarity with PLM systems such as Arena PI2bc6ea5-

Description: Are you a detail-oriented machinist who takes pride in producing high-quality parts? Do you enjoy working with precision equipment in a clean, climate-controlled environment? At Mate Precision Technologies, we Respect, Support, and Inspire metalworking professionals around the world-and we're looking for a skilled 1st Shift Machinist to join our team. This is more than a machine operator role. It's an opportunity to be part of a team that values craftsmanship, precision, collaboration, and continuous improvement. At Mate, people build long-term careers because they're supported, challenged, and appreciated for the work they do. Requirements: In this role, you'll set up and operate CNC and conventional machines and machining centers to produce precision components while meeting quality, productivity, and delivery expectations. You'll work with blueprints and GD&T requirements, inspect your own work using precision measuring tools, and troubleshoot issues to help keep production running smoothly. You'll also collaborate with engineering, quality, and production teams to solve problems, improve processes, and support continuous improvement efforts such as 5S, Kaizen events, and value stream mapping. Success in this role comes from strong attention to detail, mechanical aptitude, a commitment to quality, and a willingness to support the team. Qualified candidates will have a high school diploma or equivalent, with a two-year technical degree preferred. Experience operating CNC and/or conventional machining equipment is required, along with strong knowledge of machine tooling, fixtures, machining processes, blueprint reading, and GD&T. Candidates should be comfortable using precision inspection equipment such as micrometers, calipers, indicators, and gauges, and have basic familiarity with machine programming features and ERP systems. Strong math skills, communication skills, and a dependable, safety-focused mindset are essential. Why do people stay at Mate? Because it's a place where your skills are respected, your growth is supported, and your work truly matters. We offer: Competitive pay ranging from $25.00-$39.36 per hour based upon skill and experience 1st Shift schedule: Monday-Friday, 6:30 AM - 3:00 PM Comprehensive benefits including medical, dental, vision, life insurance, disability coverage, PTO, paid holidays, and more 401(k) with company match and profit sharing Tuition reimbursement and professional development opportunities An award-winning wellness program that supports work-life balance A clean, modern, climate-controlled manufacturing environment A team-oriented culture built on Respect, Support, and Inspire Mate Precision Technologies, headquartered in Anoka, Minnesota, is a global leader in metalworking solutions serving customers in more than 85 countries. Since 1962, we've built our reputation on precision, innovation, and strong partnerships-with both our customers and our employees. If you're ready to bring your machining skills to a company that values quality, teamwork, and long-term growth, apply today to join Mate as a Machinist. Compensation details: 25-39.36 Hourly Wage PI5a0cc6261d41-4861

Mechanical Assembler I (Manufacturing) Location: Sparks, NV Job Type: Full time Requisition ID: JR100077 RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV. The Production Assembler I is primarily responsible for the installation and assembly of all compressor units using specified mechanical components, fabricated parts and assembly hardware. The Production Assembler will use hand and power tools along with measuring instruments according to blueprints, sketches, schematics and other visual aids. In addition, the Assembler will test the operation of assembled components to detect malfunctions. Responsibilities Provide quality, on time assembly of compressors, generators, and associated parts and pieces. Assemble compressors and/or their subassemblies, according to customer's needs, following blueprints and other written and verbal specifications. Overhaul and repair used compressors or components as required to meet customer needs. To control the manufacturing expenses of the plant through the proper use of all supplies and equipment and the meeting of all labor standards. Provide packaging as required for products prior to shipping. Notify supervisor of adequate levels of supplies and tools for completion of assigned production. To ensure effective communication within the department and with all company functions. Adhere to all safety policies and practices. Maintain the plant facilities and equipment as directed. Misc. duties may include painting, general cleaning and basic building maintenance. Participate in cross training within the Production Department. Set up and test-run of completed machine through fixed test cycles. Independently set up and test for noise and vibration using test equipment. Overhauls and rebuilds machines and equipment. Perform all other duties in the best interest of the company or as directed by the Production Supervisor and Plant Manager. All Other Duties as Assigned Production Assembler 2 Responsibilities: Along with all responsibilities above Regulate workload with planning if necessary, back up supervisors in maintaining workload Provide adequate information of scheduling accuracy while working with planning to complete and finish work orders in a timely manner Perform functions on CSI relating to inventory issues, and/or closing out jobs. Minimum Qualifications Degree from technical school or equivalent combination of education and work experience. One year experience as a mechanical assembler or mechanic in any related field. Ability to read and understand structural drawing, schematics and operating manuals. Valid Driver's License. Ability to perform calculations such as percentages, ratios and fractions. Ability to learn basic computer skills and ability to adapt to a variety of software applications. Ability to understand the use and application of air and gas compressors and generators and basic manufacturing tooling and equipment. Ability to communicate with others to exchange information both orally and in writing. Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance. Preferred Qualifications Advance course work in any Mechanical assembly discipline. Specific experience in the manufacture of air and gas compressors and generators. Physical Requirements & Work Environment This position is regularly exposed to the following conditions: Manufacturing, warehouse and office environments While working near moving equipment, mechanical parts and lift trucks; must have the ability to follow safe operating procedures. May be exposed to loud noise, fumes and/or toxic chemicals. Must have the following physical abilities: Ability to stoop, kneel, crouch, bend, stretch, reach, and lift. Ability to lift up to 50 pounds regularly. Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers. Compensation $21.00 per hour + DOE Equal Opportunity RIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations). About RIX Industries RIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture. PI09d407e5db31-9266

Production Welder I Location: Sparks, NV Job Type: Full time Requisition ID: JR100075 RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV. Position Summary The Production Welder is primarily responsible for performing TIG welding/brazing which must pass the necessary code requirements specified by RIX Industries customers. Responsibilities Perform high-quality TIG (Tunsten Inert Gas) welding and brazing on compressors, generators, and related components. Read and interpret blueprints, weld symbols, schematics, and technical specifications to ensure precise fabrication and assembly. Maintain compliance with all safety policies, including proper use of PPE, ventilation systems, and safe handling of materials. Set up and operate TIG welding equipment, including proper selection of filler materials, shielding gases, and settings based on material type and thickness. Inspect welds for accuracy, quality, and conformance to specifications; identify and correct defects as needed. Maintain welding equipment, tools, and work areas in safe, clean, and operational condition. Assist with the control of the manufacturing expenses of the plant through the proper use of all supplies and equipment and the meeting of all labor standards Monitor material usage and notify supervisors of adequate levels of supplies and tools for completion of assigned work. Ensure effective communication within the department and with all company functions. Participate in all cross-training programs and continuous improvement initiatives within the production team. All Other Duties as Assigned Minimum Qualifications Welding Certification from technical school plus 1 year of hands-on TIG welding. Ability to Achieve and maintain certification per Mil-Std-278 welding and brazing standards. Ability to read and understand structural drawing, schematics and operating manuals. Ability to pass a respirator fit test and pulmonary function test. Ability to perform calculations such as percentages, ratios and fractions. Basic computer skills and ability to learn manufacturing systems and software. Ability to understand the use and application of air and gas compressors and generators and basic manufacturing tooling and equipment. Ability to communicate with others to exchange information both orally and in writing. Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance. Physical Requirements 1. This position is regularly exposed to the following conditions: Manufacturing, warehouse and office environment. While working near moving equipment, mechanical parts and lift trucks; must have the ability to follow safe operating procedures. May be exposed to loud noise, fumes and/or toxic chemicals. 2. Must have the following physical abilities: Ability to stoop, kneel, crouch, bend, stretch, reach, and lift. Ability to lift up to 50 pounds regularly. Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers. Work Environment Production Compensation $28.00 + DOE Equal Opportunity RIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations). About RIX Industries RIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture. PIe3903a8c52d5-6957

Material Project Coordinator Location: Sparks, NV Job Type: Full time Requisition ID: JR100059 RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV. Position Summary The Material Project Coordinator is primarily responsible for working in conjunction with Production Planning to pick material and organize project related jobs to ensure a consistent and accurate flow of materials to the production area. This role will also monitor the progress of production work orders for these projects ensuring job transactions are executed in a timely manner. The role will also notify management of any outstanding shortages to complete suffix tasks. When current on project tasks they will work with the material supervisor to either cycle count inventory or pick orders for regular production. Finally, this role will ensure material transactions on jobs throughout the warehouse are current and correct. Responsibilities Responsibilities as Project Coordinator: Work in conjunction with the Production Supervisor and Production Planning to complete and monitor progress on all projects, parts orders, work orders, and purchase orders related to builds specified by MS. Ensure all project carts are organized and up to date both physically and in CSI. Reporting any shortages and acting on resolving any shortages on the assigned projects, tasks, and jobs Utilize CSI to review all jobs, tasks, and suffixes to ensure parts are properly issued, jobs are correctly assigned and closed, and any issues are made known to both the Production Supervisor and Master Scheduler. Attend weekly production/project review meetings, as required. Monitor material pick lists and material shortage lists. Ensure expediting efforts are prioritized according to delivery dates and available material. Maintain weekly progress updates on parts orders, work orders and purchase orders as required. Review open jobs though out the warehouse to ensure jobs, suffixes, tasks align with where the job is located. Learn, Oversee, and control the Dedicated Warehouses (SPA =S01 and SM01 and Ben =B01, including additional if created. General housekeeping of the Job Cart area including trash and empty carton management, label management and any other requirement to preserve order and integrity of the area. All Other Duties as Assigned Responsibilities as Warehouse Picker: Working with the Warehouse Lead to execute pick activity as prescribed by the production or transfer schedule Learn and use scanning technology to pick orders assigned: Identifying parts by correct part number and location Removing any parts required by the pick instruction, by correct lot number, if required Ensuring remaining items are clearly marked, returned, and located in the correct location Issue parts as required per document specifications Notifying Warehouse Lead immediately if any discrepancy is identified Maintain picking cart and environment in a safe and orderly manner Prepare any documentation required to pick/put away items Suggest consolidation or improvement of inventory as noticed through work activity Ensure effective communication within department. Restock any unused parts and correctly transact return in company system Complete daily assigned cycle counts to ensure accuracy of inventory. Maintain a clean and organized workplace. Participate in cross-training programs in other areas as needed Additional requirements: Assist Inventory Coordinator with stock transfers, discrepancies, cycle counting, as needed. Correct and update documentation and any or all work instructions as applicable. Perform functions on CSI relating to inventory issues, and/or closing out jobs. Coordinate training of new employees to follow all processes, standards, and work instructions. Provide updates and implement improvement ideas regarding 5S, and efficiency opportunities. Other duties as assigned. Minimum Qualifications High School Diploma or equivalent. Ability to focus in a busy and distracting environment. Knowledge of Production and inventory control (P&IC) techniques. Understanding of manufacturing processes Should have a basic understanding of MRP principles. Requires high energy, good attitude, resourcefulness, and a strong sense of urgency. Proficient computer skills, including the ability to navigate multiple systems and software applications efficiently. Ability to understand the assembly, use and application of air and gas compressors and generators. Ability to communicate with others to exchange information both orally and in writing. Excellent organizational skills with the ability to track details, deadlines, and competing responsibilities. Strong ability to manage multiple priorities and tasks simultaneously in a fast-paced environment. Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance. Preferred Qualifications Background in a production management or supply-chain discipline. Physical Requirements 1. This position is regularly exposed to the following conditions: Manufacturing, warehouse and office environment. While working near moving equipment, mechanical parts and lift trucks; must have the ability to follow safe operating procedures. May be exposed to loud noise, fumes and/or toxic chemicals. 2. Must have the following physical abilities: Ability to stoop, kneel, crouch, bend, stretch, reach, and lift. Ability to lift up to 50 pounds regularly. Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers. Work Environment Production Compensation $23.00 + DOE Equal Opportunity RIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations). About RIX Industries RIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture. Compensation details: 23-23 Hourly Wage PIe0f3cab9fb39-4616

Production Welder II Location: Sparks, NV Job Type: Full time Requisition ID: JR100054 RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV. Position Summary The Production Welder II is primarily responsible for performing TIG welding/brazing which must pass the necessary code requirements specified by RIX Industries customers. Responsibilities • Perform high-quality TIG welding and brazing on compressors, generators, and associated components. • Independently read and interpret blueprints, weld symbols, schematics, and technical specifications to execute precise welds with minimal supervision. • Set up, adjust, and operate welding equipment, including proper selection of filler materials, shielding gases, and machine settings based on material and job requirements. • Inspect completed welds to ensure conformance to specifications and quality standards; identify defects and perform rework as needed. • Maintain compliance with all safety policies and procedures, including proper PPE usage and safe handling of materials and equipment. • Support and maintain required welding certifications, including MIL-STD-278, ensuring work meets applicable military and quality standards. • Troubleshoot basic welding and fit-up issues and collaborate with engineering or quality teams to resolve discrepancies. • Maintain welding equipment, tools, and work areas in safe, clean, and operational condition. • Monitor material usage and notify supervision of supply or tooling needs to support production schedules. • Support production efficiency by meeting labor standards and contributing to cost control through proper use of materials and equipment. • Provide guidance and support to less experienced welders as needed; participate in cross-training initiatives. • All Other Duties as Assigned Minimum Qualifications • Welding Certification from technical school plus 3 years of hands-on TIG welding. • Demonstrated experience welding and brazing RIX products, with the ability to efficiently and independently complete all required weld and braze assemblies in accordance with governing documentation (RIX drawings, travelers, fixtures, etc.). • Skilled in a range of fabrication activities, including fitting and welding piping and tube assemblies, and fabricating components such as gauge panel frames, bedplate assemblies, and other structures required to support RIX Production and Operations. • Maintains active certification to MIL-STD-278 wedling and brazing standards; able to consistently produce work that meets military and internal quality requirements. • Ability to independently apply technical documentation (drawings, travelers, procedures) to complete assigned work accurately. • Must be able to pass and maintain respirator fit and pulmonary function requirements. • Demonstrated ability to perform shop math, including percentages, ratios, fractions, and measurements, as applied to fabrication and welding tasks. • Working knowledge of manufacturing systems and basic computer applications; able to learn and adapt to company-specific software. • Solid understanding of the function and application of air and gas compressors, generators, and related manufacturing equipment. • Ability to communicate effectively with team members, supervisors, and cross-functional partners both verbally and in writing. • Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance. Physical Requirements 1. This position is regularly exposed to the following conditions: • Manufacturing, warehouse and office environment. • While working near moving equipment, mechanical parts and lift trucks; must have the ability to follow safe operating procedures. • May be exposed to loud noise, fumes and/or toxic chemicals. 2. Must have the following physical abilities: • Ability to stoop, kneel, crouch, bend, stretch, reach, and lift. • Ability to lift up to 50 pounds regularly. • Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers. Work Environment Production Compensation $32.00 + DOE Equal Opportunity RIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations). About RIX Industries RIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture. PIec5dc4f0d4f4-9806

Manufacturing Engineer II Location: Sparks, NV Job Type: Full time Requisition ID: JR100070 RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV. Position Summary The Manufacturing Engineer II independently drives improvements across the RIX value stream and owns manufacturing processes for assigned products or production areas. This role develops and implements process improvements, ensures manufacturing readiness for new products, and leads corrective actions to resolve production issues. Responsibilities Independently develop, implement, and improve manufacturing methods, operation sequences, tooling, and process documentation for components, subassemblies, and final assemblies. Own manufacturing readiness for assigned products, ensuring routings, BOM structures, labor standards, and work instructions are accurate and optimized. Influence product design to improve manufacturability and assembly efficiency. Identify and implement manufacturing process improvements that increase safety, ergonomics, throughput, and product quality while reducing cycle time and cost of goods sold. Lead root cause investigations and corrective actions related to manufacturing failures, NCRs, and CARs in collaboration with Quality. Estimate manufacturing costs and establish time standards used for production planning and quoting. Support implementation of engineering changes by ensuring manufacturing documentation, routings, and shop processes reflect the latest design intent. Coordinate with quality, production, and engineering teams to resolve manufacturing and production issues. Provide technical support to production teams by troubleshooting equipment issues, process problems, and manufacturing bottlenecks, including assisting with rework planning when necessary. Evaluate equipment and tooling requirements and support capital equipment implementation. Support or lead continuous improvement initiatives such as Lean events or Kaizen activities. Analyze production data and performance metrics to identify trends, inefficiencies, and opportunities for improvement within the value stream. Lead moderately complex manufacturing improvement projects within assigned production areas. Serve as a technical resource to production personnel and junior engineers, including providing training on new manufacturing processes, tooling, and methods. All other duties assigned. Minimum Qualifications Bachelor's Degree in Industrial, Manufacturing, or Mechanical Engineering from an accredited college or university. A minimum of 4 years of relevant work experience in a manufacturing or industrial engineering role. Solid understanding of algebra and geometry, ability to apply advanced mathematical concepts such as exponents, logarithms, polynomial equations, and differential calculus. Understanding of mechanisms and how the parts interrelate in an assembly. Working knowledge of machine design and GD&T dimensioning. Working knowledge of detail part manufacturing, assembly processes and production workflow planning. Advanced understanding of Bill of Material (BOM) structuring and routings. Outstanding critical thinking, analytical and problem-solving skills, including a high-level of ingenuity and creativity. Excellent interpersonal, verbal, technical writing, and presentation skills. Outstanding analytical, planning, and time management skills. Basic computer skills with the ability to adapt to a variety of software applications (including: Autodesk-Inventor, Visio, Excel, and Project). Familiarity with and ability to perform basic cost accounting calculations such as ROI, NPV, and Cost of Goods. Ability to communicate with others to exchange information both orally and in writing. Ability to travel up to 10% of the time based on business need. Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance. Preferred Qualifications Experience implementing Lean manufacturing practices. Lean Six Sigma Certified. Specific experience in the manufacture of complex machinery, and particularly promoting Design. for Manufacture/Design for Assembly principles. Familiarity with basic business finance principles. Physical Requirements 1. Must have the following physical abilities: Ability to stoop, kneel, crouch, bend, stretch, reach, and lift. Ability to lift up to 50 pounds regularly. Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers. Work Environment Production Compensation: $100,000 + DOE Equal Opportunity RIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations). About RIX Industries RIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture. PIb1120e1d4d5b-6096

Painter/Utility Worker Location: Sparks, NV Job Type: Full time Requisition ID: JR100041 RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV. Position Summary The Painter/Utility Worker is primarily responsible for the overall support and assistance with the prepping and painting of compressors to include packaging and production. Responsibilities Provide quality, on time painting of compressors, generators, and associated parts. Working with production supervisor for prioritization of work orders to complete on time delivery painted components Mask/Prep/Clean all components before applying primer/paint. Maintain all paint logs per Rix policies. Adhere to all safety rules, regulations, and practices. Maintain the paint booth and equipment as directed and complete weekly 5S Cleanings/audits; both in and outside. Notify supervisors of adequate levels of supplies and tools for completion of assigned tasks. Participate in all cross-training programs as directed by supervisor. Adhere to all company rules and policies. Perform all other duties in the best interest of the company or as directed by the Director of Operations and/or Production and Manufacturing Manager. Forklift certification necessary to move and transport components. All Other Duties as Assigned Minimum Qualifications Pass and maintain painter qualification courses. Technical school or equivalent combination of education and/or work experience. Valid Driver's license with no restrictions for insurance purposes. Ability to read and understand structural drawing, schematics and operating manuals. Ability to perform calculations such as percentages, ratios and fractions. Ability to learn basic computer skills and ability to adapt to a variety of software applications. Ability to understand the use and application of air and gas compressors and generators and basic manufacturing tooling and equipment. Ability to communicate with others to exchange information both orally and in writing. Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance. Preferred Qualifications Advanced coursework in any mechanical assembly discipline. Specific experience in the manufacture of air and gas compressors and generators a plus. Painting of industrial equipment Physical Requirements 1. This position is regularly exposed to the following conditions: Manufacturing, warehouse and office environment. While working near moving equipment, mechanical parts and lift trucks; must have the ability to follow safe operating procedures. May be exposed to loud noise, fumes and/or toxic chemicals. 2. Must have the following physical abilities: Ability to stoop, kneel, crouch, bend, stretch, reach, and lift. Ability to lift up to 50 pounds regularly. Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers. Compensation $22.00 + DOE Equal Opportunity RIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations). About RIX Industries RIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture. PI31d560d83be0-6920

Mechanical Assembler II (Manufacturing) Location: Sparks, NV Job Type: Full time Requisition ID: JR100031 RIX Industries is a technology-focused company specializing in the design, development and manufacturing of gas generation systems, precision compressor solutions, and cryogenic cooling technologies for critical applications in Marine, Aerospace, Land, Energy, Industrial, Medical, and Critical Infrastructure markets. Founded in 1878, the company is headquartered in Benicia, CA, and operates additional facilities in Sparks, NV. Position Summary The Production Assembler 2 is primarily responsible for the installation and assembly of all compressor units using specified mechanical components, fabricated parts, and assembly hardware. The Production Assembler will use hand and power tools along with measuring instruments according to blueprints, sketches, schematics, and other visual aids. In addition, the Assembler will test the operation of assembled components to detect malfunctions. Assembler 2 may be responsible for assigned projects, areas, and work closely with the Production Supervisor. Responsibilities Provide quality, on time assembly of compressors, generators, and associated parts and pieces. Assemble compressors and/or their subassemblies, according to customer's needs, following blueprints and other written and verbal specifications. Overhaul and repair used compressors or components as required to meet customer needs. To control the manufacturing expenses of the plant through the proper use of all supplies and equipment and the meeting of all labor standards. Provide packaging as required for products prior to shipping. Notify supervisor of adequate levels of supplies and tools for completion of assigned production. To ensure effective communication within the department and with all company functions. Adhere to all safety policies and practices. Maintain the plant facilities and equipment as directed. Misc. duties may include painting, general cleaning and basic building maintenance. Participate in cross training within the Production Department. Set up and test-run of completed machine through fixed test cycles. Independently set up and test for noise and vibration using test equipment. Overhauls and rebuilds machines and equipment. Regulate workload with planning, if necessary, back up supervisors in maintaining workload Provide adequate information of scheduling accuracy while working with planning to complete and finish work orders in a timely manner. Perform functions on CSI relating to inventory issues, and/or closing out jobs. Correct and update documentation and any or all work instructions as necessary. Coordinate training of new employees to follow all processes and standards set by engineering or work instructions. Provide updates and implement improvement ideas regarding 5S, and efficiency opportunities. Maintain critical discussions and information with supervisors regarding key points of focus on work order demand and opportunities for improvement. Perform all other duties in the best interest of the company or as directed by the Production Supervisor and Plant Manager. Minimum Qualifications Degree from technical school or equivalent combination of education and work experience. 3- 5 years experience as a mechanical assembler or mechanic in any related field. Ability to read and understand structural drawing, schematics, and operating manuals. Valid Driver's License. Ability to perform calculations such as percentages, ratios, and fractions. Ability to learn basic computer skills and ability to adapt to a variety of software applications. Ability to understand the use and application of air and gas compressors and generators and basic manufacturing tooling and equipment. Ability to communicate with others to exchange information both orally and in writing. Citizenship: U.S. Citizen or qualified U.S. Person in accordance with ALU 22CFR 120.15. May require the ability to obtain DOD security clearance. Preferred Qualifications Advance course work in any Mechanical assembly discipline. Specific experience in the manufacture of air and gas compressors and generators. Physical Requirements 1. This position is regularly exposed to the following conditions: Manufacturing, warehouse and office environment. While working near moving equipment, mechanical parts and lift trucks; must have the ability to follow safe operating procedures. May be exposed to loud noise, fumes and/or toxic chemicals. 2. Must have the following physical abilities: Ability to stoop, kneel, crouch, bend, stretch, reach, and lift. Ability to lift up to 50 pounds regularly. Ability to sit or stand for extended periods at a desk or table as well as machine tools or printers. Compensation $24.00 per hour + DOE Equal Opportunity RIX Industries is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with RIX Industries, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations). About RIX Industries RIX Industries is a global leader in the design, development, and manufacturing of hydrogen and gas generation systems, precision compression solutions, and cryogenic cooling technologies. Company innovation extends to newer technologies with universal impact, including pioneering hydrogen-on-demand systems for critical infrastructure initiatives worldwide. We take our 'focused on the future' mantra seriously - whether we're supporting lifesaving oxygen generation strategies for remote medical facilities, solving complex applications featuring industrial gases, providing mission critical technologies for our military, or engineering clean power solutions for land and sea. Infrastructure is at the forefront of our vision, and we're poised to play a critical role in shifting the world to cleaner, safer, better ways of living and conducting business. At RIX, every employee is an integral part of this big picture. Compensation details: 24-24 Hourly Wage PIbe440c8e5-

Job Description Job Description Position Summary: This position is responsible for the design and development of oscillator products with state-of-the-art phase noise and g-sense performance. Leads project teams in a fast-paced team environment, to deliver new products to customers on time, meeting or exceeding all requirements and resulting in profitable products when transitioned to production. Major Duties: Apply technical principles of engineering and electronics and utilize RF synthesis and simulation software packages to design, simulate and prototype new OCXO's with state-of-the-art ultra-low phase noise and g-sense performance. Perform detailed analysis of compliance for electrical, mechanical, environmental and regulatory requirements (compliance matrix) for all new products being quoted. Estimate total costs, including material, labor, test and development costs as well as lead time for new products to be quoted. Lead design and development projects to completion following the company's documented design and development process. Optimize new products for performance, lead time and cost. Provide guidance to assemblers and engineering technicians during the prototype build and optimization phase. Interface with Manufacturing Engineering to develop any new processes required to support new products. Interface with purchasing department to ensure required materials for prototypes are procured and delivered on time. Provide timely updates on progress of projects. Lead and/or participate in required project meetings: Project kick-offs, peer design reviews, pre-ship reviews, etc Provide necessary design engineering support during transition of new products to production. Support mature products already in production that need design engineering support for obsolete components, quality or reliability issues or further optimization. Educate, train, mentor and coach other design engineers and technicians that have less experience or knowledge in the field. Stay up to date in technology and industry trends and propose new products to management that can give company a competitive advantage. Supervises : None Knowledge, Skills, & Abilities: Demonstrated RF/MW oscillator design knowledge and competence working in several oscillator topologies with emphasis on ultra-low phase noise and low G-sense OCXO's. This knowledge should include resonator selection, oscillator optimization, amplification, DC regulation, RF/Digital/Analog circuit-layout best practices. Mastery of RF/Microwave synthesis, simulation, and analysis software like AWR Microwave Office or Pathwave (Genesys). Knowledge of technologies and processes used in the design and fabrication of oscillators and similar products. Strong project management skills. Strong hands-on bench skills. Excellent communication skills and ability to work well with others to perform a wide variety of tasks in a fast-paced engineering/production environment. Desirable: Knowledge and understanding of radio architecture, avionic and military communication systems, and radar architecture. Must be able to work with ITAR data without a license Education, Experience and Training: Prefer BSEE or MSEE. Minimum experience of 5 years in the RF/Microwave industry in oscillator design. Company Description Mtron designs and manufactures high-performance, highly reliable RF components for demanding applications in space, avionics, aerospace, defense, and more. With full vertical integration, from materials science to final manufacturing, we support critical systems like satcom, radar, electronic warfare, and test equipment. Headquartered in Orlando, Florida, we operate globally with facilities in North America, India, and Asia. We are guided by our core values of Integrity, Respect, Innovation, and Collaboration. Company Description Mtron designs and manufactures high-performance, highly reliable RF components for demanding applications in space, avionics, aerospace, defense, and more. With full vertical integration, from materials science to final manufacturing, we support critical systems like satcom, radar, electronic warfare, and test equipment. Headquartered in Orlando, Florida, we operate globally with facilities in North America, India, and Asia. We are guided by our core values of Integrity, Respect, Innovation, and Collaboration.

Date Posted: 2026-06-05 Country: United States of America Location: US-AZ-TUCSON-M E Hemisphere Loop BLDG M10 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Precision Control Actuation System department is seeking a mechanical engineer to join the PCAS organization to support the development, build, and verification of control actuation systems. The PCAS organization staffs mechanical engineers for a variety of roles supporting primarily control section Integrated Product Teams. You will provide various mechanical engineering support as needs of programs fluctuate. Based on skillsets, support may include but is not limited to detailed mechanical design, earned value management, test design and execution, and systems engineering. You will be expected to flex responsibilities based on the current needs of the organization and their respective skill sets. What You Will Do P5 - At this grade level, you will be expected to work autonomously, have expert or mastery level knowledge within the control mechanism development domain, and exercise strategic vision to influence the functional and organizational strategies of the PCAS organization beyond assigned program work. The PCAS organization provides ample opportunities for hands-on hardware work. PCAS mechanical engineers are exposed to a variety of lab activities including engineering builds, hardware integration, hardware tuning, and hardware verification. The PCAS organization provides a strong technical learning environment with a dedicated control system technology pyramid comprised of engineering fellows. PCAS mechanical engineers are provided the opportunity for direct access to these subject matter experts, fostering accelerated technical growth. Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience, or An Advanced Degree in a related field and minimum 7 years experience A minimum of 10 years of experience in mechanical engineering design Qualifications We Prefer Experience with Systems or Mechanical Engineering of servo controls Experience with development of CAS requirements, CAS architecture, requirements risk, requirements verification and validation, system performance & function, safety and environmental compliance. Experience in working with control actuation systems that employ permanent magnet brush and brush less DC motor technology Experience with feedback control systems, including sizing, testing and integration, design-for-manufacturing, kinematic and dynamic simulation and analysis Proficient in Geometric Dimensioning and Tolerancing per ASME Y14.5 Proven ability to deconstruct higher level tasks into discrete lower-level work packages and tasks Proficient in generating free body diagrams Proficient in Engineering processes and procedures Moderate 3D modeling skills with a prominent commercial software package Experience with Pro/Engineer/CREO 3D modeling and mechanical drawing generation Experience using Matlab, Simulink, and dSpace Proven design and manufacturing knowledge in machined parts, injection molded parts, hobbing, broaching, sheet metal fabrication, BLDC motors, wire harnesses/flex harnesses and related components, corrosion resistant steels and aluminum alloys What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Please consider the following role type definition as you apply for this role: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-04-27 Country: United States of America Location: US-AZ-TUCSON-M E Hermans Rd BLDG M02 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Materials and Process Engineering Department, which functions within Hardware Engineering, is looking for a Senior Principal High Temperature Materials Engineer to join our Advanced Materials Section in Tucson, Arizona. A qualified candidate will have a strong background in high temperature material testing and material manufacturing methods. This position will offer a qualified candidate the opportunity to work in integrated product teams to incorporate high temperature materials into deliverable products and aid in the assessment of system performance. A candidate must be able to manage and coordinate a wide variety of simultaneous tasks within set schedule requirements. This candidate will become part of a multi-disciplined team. The candidate will define design verification test requirements to ensure that key performance characteristics and potential environmental interaction effects are quantified within program cost and schedule constraints. Deliverables will include test documentation, data analysis, anomaly resolution, results documentation, and presentation of results to both internal and external customers. What You Will Do You will serve as a technical leader for material decisions who will define where a program or product line is heading or needs to go, while considering the technical and programmatic aspects of how to get there. You must then drive the execution of that strategy across multiple programs. You will be viewed as an expert and serve as a subject matter expert to the organization in determining and developing required technologies to achieve organization growth objectives in high temperature applications. You will be a technical lead in a team environment on diverse projects, providing independently determined solutions to create high fidelity simulations and models for missile system design, performance assessment, flight test support, trade studies and analysis. You will provide mentorship and shoulder-to-shoulder empirical experience for engineers. You will work independently or through leadership of teams to solve the hardest high temperature materials challenges. You will be a strong advocate for technical integrity of and have advanced experience/knowledge in high temperature material disciplines such as: High temperature metals, composites, and coatings, and their fabrication processes. High temperature materials spanning the technologies of Ceramic Matrix Composites (CMC), Carbon/Carbon (C/C), SiC (Si/C) ceramics, RF and EOIR apertures, refractory metals, ablative coatings, and high temperature alloys. Environmental barrier and oxidation resistant coatings, component integration and materials modeling. Heat management and rapid heat transfer techniques. Related manufacturing technologies, integration, and environmental testing. High temperature test methods such as arc-jet. Experience with Root Cause / Corrective Action resolution. Expectations of the role: Potential SAP/Program access needs Travel requirements: as needed to support programs and work with vendors The Sr. Principal High Temperature Materials Engineer job is in Tucson, AZ and the position is onsite. Qualifications You Must Have Typically requires A University Degree or equivalent experience and minimum 10 years prior relevant experience, or An Advanced Degree in a related field and minimum 7 years experience. Experience in design and development (i,.e, material selections manufacturing, and/or suppliers in materials or mechanical engineering related projects) Qualifications We Prefer Bachelor's Degree in Materials Science/Engineering, Chemistry, Mechanical Engineering, Physics, or related disciplines. Strong verbal and communication skills, proven capability interacting with cross-functional teams, interacting with teammates of varied experience (students, professors, industry members) Good analytical and problem-solving skills Ability to determine root cause and solutions to problems in an expeditious manner Highly skilled in troubleshooting, problem solving, and analysis Experience working on programs, projects, or products associated with the Defense Industry Ability to lead and execute project work independently Demonstrate multi-task capabilities in fast paced environment. Understanding of technology transfer to manufacturing and process release concepts Experience working with engineering drawings Understanding of material safety datasheets, military specifications, and ASTM test methods Experience with mechanical and/or chemical analysis methods and characterization techniques Ability to write concise technical reports summarizing analyses Demonstrated ability to lead and complete scientific based projects including failure analysis investigations Proficient in Microsoft Office products (Word, Excel, PowerPoint) Strong communication, interpersonal, planning and time management skills ABET is the preferred, although not required, accreditation standard. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-05-12 Country: United States of America Location: US-AZ-TUCSON- S Rita Rd BLDG 9020 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon Sensor Test Solutions (STS) is actively seeking an onsite Electrical Prototyping Fabrication Technician to join the Test Equipment Engineering Directorate in Tucson, Arizona. The Test Equipment Engineering Directorate (TEE) includes all engineering disciplines responsible for systems design & test on every Raytheon product. Our engineers are responsible for each element of the development lifecycle for test including test requirements, test system design, flight simulations, hardware-in-the-loop, computer-in-the-loop, advanced engineering prototyping technology, flight operations for manned and unmanned vehicles, environmental testing, environmental characterization and engineering laboratory management. We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the world. Electrical Prototyping Fabrication Technicians work in an engineering environment to co-develop engineering hardware in accordance with customer and internal requirements, as well as industry standards. Candidates will collaborate with multi-disciplined design teams across multiple projects to bring design concepts to fruition, providing rapid engineering, fabrication and prototyping solutions throughout the entire product lifecycle. This position is 100% ONSITE in Tucson, Arizona. What You Will Do Fabricate, maintain, modify, and repair complex prototype electrical assemblies Rely on extensive experience to interpret drawings, schematics, 3D models, written notes, and specifications Lead other technicians in the layout and fitment of electrical, electro-optical, electro-mechanical, and mechanical assemblies Adapt methods and procedures to test, analyze, and troubleshoot new hardware Apply advanced skills to test, inspect, and prove-in complex prototype electrical assemblies Lead in electrical/mechanical engineering drawing peer reviews to validate engineering design specifications in development of producible prototypes Assess complex designs to ensure producibility, maintainability, safety, and reliability Communicate build concerns to customers and collaborate on design improvements Work in closed/proprietary/classified areas without access to personal communication devices such as phones/tablets, etc Qualifications You Must Have Typically requires an AA/AS degree (or other 2-year post high school training) with a minimum of 8 years relevant experience Experience in an engineering environment, testing and fabricating electrical assemblies in four or more of the following areas: cables or wire harnesses breakout boxes chassis, circuit card modifications racked electronic equipment troubleshooting of systems in an integration environment Experience reading and interpreting electrical and mechanical drawings and schematics The ability to obtain and maintain a U.S. government issued Secret security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Prefer Experience analyzing and interpreting schematics and drawings to identify producibility issues Military electronics or avionics training Familiarity with 3D drawings and CAD tools J-STD-001 Solder certification IPC 610 & 620 Acceptability certifications and inspection experience What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Location Information This position is in beautiful Tucson, AZ. Tucson has a friendly, caring and laid-back atmosphere, combined with the innovation and energy of a metropolitan region and recognized as one of America's 10 Best Small Cities. Surrounded by beautiful mountains, colorful Sonoran Desert landscape and majestic saguaro cacti, Tucson is blessed with some of nature's best work. Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round. Tucson, AZ: ,-az-location Raytheon Information - As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 60,000 USD - 114,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2026-05-22 Country: United States of America Location: US-MA-MARLBOROUGH-MA1 1001 Boston Post Rd BLDG 1 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world's most complex problems. With our three market leading businesses, world-class operations and investments in research and development, we offer capabilities and opportunity no one else can. Together, we push the boundaries of known science and find new ways to connect and protect our world. Raytheon brings the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. We deliver solutions that help our nation and allies defend freedom and deter aggression, creating a safer, more secure world. Join us and help shape the future of aerospace and defense. The Radar Mechanical Design Department leads mechanical design, development, and integration of some of the most innovative land-based and shipboard radars in the world. This includes phased array radar systems, electronic modules, pedestals, and power and cooling systems. The department comprises individuals with technical expertise and experience in hardware design, integration, and production support. Raytheon is hiring a Senior Mechanical Engineer to support our radar development programs. You will be responsible for working with mechanical teams in all phases of our design cycles, from concept development through design, development, building and test. Key requirements for this position include proven problem-solving skills and experience in hardware design and integration, engineering analysis, and mechanical drawing creation with military hardware. Individuals will interface and collaborate primarily with other engineering disciplines, as well as operations, systems, quality and program offices. This Senior Mechanical Engineer is an on-site role in Marlborough, MA or Tewksbury, MA. What You Will Do Utilizing mechanical hardware design experience and knowledge with ruggedized structures, interconnects, cooling, RF and electronics packaging. Develop technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of phase array radars/electronics for multiple military programs. Employ transition-to-production practices with the ability to lead a design release into production. Work with limited supervision and meet commitments for assigned schedule, financial, and technical goals with ability to make enhancements and leverage in daily work. Provide technical conscience, challenged with making sure the product and process meet appropriate standards and requirements while helping to remove roadblocks. Perform tolerance analyses to ensure form, fit, and function are as intended by design for the use-application. Interact frequently with senior personnel on technical matters often requiring coordination between organizations. Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an Advanced Degree in a related field and minimum 3 years experience. Experience with design of radar architecture, structures, cooling or electronics packaging for military or aerospace or commercial applications. Experience with ANSI/ASME Y14.5 GD&T. Qualifications We Prefer Mechanical background with high technical aptitude. Experience with ANSI drawing standards and technical data package creation. Experience with designing for military, ruggedized or commercial standards. Experience in leading small development efforts and teams. Experience with CREO (Pro/E) or similar 3D solid modeling software. Cognizant of machine suppliers' capabilities or have direct experience in manufacturing and assembly support role for producibility. Leadership skills and project management. Experience in selection of materials for structural, thermal, mechanical, electrical, producibility, and environmental considerations including corrosion mitigation and prevention. Working knowledge of Microsoft Office (Word, Excel, PowerPoint). Excellent verbal and written communications and interpersonal skills when working with teams. What We Offer A total rewards package that goes above and beyond with compensation; healthcare, wellness, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance and child/adult backup care. Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, Innovation, and Safety. Relocation assistance available. Learn More & Apply Now! Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms