Position Purpose: All drivers run daily routes with frequent stops and are required to load packages onto hand trucks and unload product at each stop on the assigned route in the order they are designated by the Transportation Department Manager. Candidate will operate successfully in a cross dock model picking up loaded truck from a nightly delivery at f the assigned loading dock and returning the empty truck back to the assigned lot at the end of the route. May be required to assist occasionally with loading trucks, palletizing product, and performing other duties as assigned by Supervisor or Manager. Primary Responsibilities: Runs routes efficiently, meeting or exceeding designated route times Unload product from trailer, by hand or using hand cart, and place in designated customer storage areas. May include transporting product down ramps, stairs, or docks, in all weather conditions. Frequently lift, push, or move product that weighs 1-75 pounds, up to 100 pounds; frequently reach up to 72" to stack and unstack pallets and hand cart; constantly bend and twist while loading and unloading product, and retrieving items from trailer. Verify delivery of items with customer and obtain proper signatures. Contact management for authorization when discrepancies on invoice and communicate all errors/returns. Calls in when customer does not receive their entire order (shorts) Handles any customer complaints professionally Handles company equipment properly, follows written driver safety rules, and performs pre-trip inspection. Perform pre-trip and post-trip responsibilities in accordance with Department of Transportation (DOT) regulations and Sysco policies and procedures Education: High School or GED or equivalent Experience: One year route delivery experience or applicable background driving a straight truck Valid Driver's License Must be able to read and understand English. Skills: Operate vehicle in a variety of traffic and weather conditions. Meet or exceed minimum productivity levels established by the Company. Meet or exceed established cases per error goals Demonstrate strong customer relations and problem resolution skills. Effectively plan and organize work activities independent of direct supervision. Develop a good working knowledge of product and inventory control techniques and procedures. Maintain ongoing inter-department communications related to routing, safety, and customer relations. Proven ability to communicate articulately and perform simple arithmetic (Experience in handling money preferred) Building Customer Loyalty Managing Work Adaptability Building Trust Follow-up Communication
06/19/2026
Full time
Position Purpose: All drivers run daily routes with frequent stops and are required to load packages onto hand trucks and unload product at each stop on the assigned route in the order they are designated by the Transportation Department Manager. Candidate will operate successfully in a cross dock model picking up loaded truck from a nightly delivery at f the assigned loading dock and returning the empty truck back to the assigned lot at the end of the route. May be required to assist occasionally with loading trucks, palletizing product, and performing other duties as assigned by Supervisor or Manager. Primary Responsibilities: Runs routes efficiently, meeting or exceeding designated route times Unload product from trailer, by hand or using hand cart, and place in designated customer storage areas. May include transporting product down ramps, stairs, or docks, in all weather conditions. Frequently lift, push, or move product that weighs 1-75 pounds, up to 100 pounds; frequently reach up to 72" to stack and unstack pallets and hand cart; constantly bend and twist while loading and unloading product, and retrieving items from trailer. Verify delivery of items with customer and obtain proper signatures. Contact management for authorization when discrepancies on invoice and communicate all errors/returns. Calls in when customer does not receive their entire order (shorts) Handles any customer complaints professionally Handles company equipment properly, follows written driver safety rules, and performs pre-trip inspection. Perform pre-trip and post-trip responsibilities in accordance with Department of Transportation (DOT) regulations and Sysco policies and procedures Education: High School or GED or equivalent Experience: One year route delivery experience or applicable background driving a straight truck Valid Driver's License Must be able to read and understand English. Skills: Operate vehicle in a variety of traffic and weather conditions. Meet or exceed minimum productivity levels established by the Company. Meet or exceed established cases per error goals Demonstrate strong customer relations and problem resolution skills. Effectively plan and organize work activities independent of direct supervision. Develop a good working knowledge of product and inventory control techniques and procedures. Maintain ongoing inter-department communications related to routing, safety, and customer relations. Proven ability to communicate articulately and perform simple arithmetic (Experience in handling money preferred) Building Customer Loyalty Managing Work Adaptability Building Trust Follow-up Communication
Job Summary: All drivers run daily routes with frequent stops and are required to load packages onto hand trucks and unload product at each stop on the assigned route in the order they are designated by the Transportation Department Manager. The candidate will operate successfully in a cross-dock model picking up a loaded truck from a nightly delivery at the assigned loading dock and returning the empty truck back to the assigned lot at the end of the route. May be required to assist occasionally with loading-trucks, palletizing product, and performing other duties as assigned by Supervisor or Manager. RESPONSIBILITIES Provide technical, customer relations, and personnel management for major programs and projects. Runs routes efficiently, meeting or exceeding designated route times Unload product from trailer, by hand or using a hand cart, and place in designated customer storage areas. May include transporting product down ramps, stairs, or docks, in all weather conditions. Frequently lift, push, or move product that weighs 1-75 pounds, up to 100 pounds; frequently reach up to 72" to stack and unstack pallets and hand cart; constantly bend and twist while loading and unloading product, and retrieving items from trailer. Verify delivery of items with customer and obtain proper signatures. Contact management for authorization when discrepancies are on invoices. Communicate all errors/returns. Calls in when a customer does not receive their entire order (shorts) Handles any customer complaints professionally Handles company equipment properly, follow written driver safety rules, and performs a pre-trip inspection. Perform pre-trip and post-trip responsibilities in accordance with Department of Transportation (DOT) regulations and Sysco policies and procedures QUALIFICATIONS Education Degrees/Certificates Minimum Required: High School or GED or equivalent Experience One-year route delivery experience or applicable background driving a straight truck Valid Commercial Driver's License - Class B (Class A preferred) Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. Skills Operate vehicle in a variety of traffic and weather conditions. Meet or exceed minimum productivity levels established by the Company. Meet or exceed established cases per error goals Demonstrate strong customer relations and problem resolution skills. Effectively plan and organize work activities independent of direct supervision. Develop a good working knowledge of product and inventory control techniques and procedures. Maintain ongoing inter-department communications related to routing, safety, and customer relations. Proven ability to communicate articulately and perform simple arithmetic (Experience in handling money preferred) Building Customer Loyalty Managing Work Adaptability Building Trust Follow-up Communication OTHER INFORMATION Frequent lifting of product up to 50 lbs. during the shift, infrequent lifting to 80 lbs. Must be able to climb on and off the box of the truck Frequent bending, squatting, pushing, and pulling Must be able to work in confined spaces
06/19/2026
Full time
Job Summary: All drivers run daily routes with frequent stops and are required to load packages onto hand trucks and unload product at each stop on the assigned route in the order they are designated by the Transportation Department Manager. The candidate will operate successfully in a cross-dock model picking up a loaded truck from a nightly delivery at the assigned loading dock and returning the empty truck back to the assigned lot at the end of the route. May be required to assist occasionally with loading-trucks, palletizing product, and performing other duties as assigned by Supervisor or Manager. RESPONSIBILITIES Provide technical, customer relations, and personnel management for major programs and projects. Runs routes efficiently, meeting or exceeding designated route times Unload product from trailer, by hand or using a hand cart, and place in designated customer storage areas. May include transporting product down ramps, stairs, or docks, in all weather conditions. Frequently lift, push, or move product that weighs 1-75 pounds, up to 100 pounds; frequently reach up to 72" to stack and unstack pallets and hand cart; constantly bend and twist while loading and unloading product, and retrieving items from trailer. Verify delivery of items with customer and obtain proper signatures. Contact management for authorization when discrepancies are on invoices. Communicate all errors/returns. Calls in when a customer does not receive their entire order (shorts) Handles any customer complaints professionally Handles company equipment properly, follow written driver safety rules, and performs a pre-trip inspection. Perform pre-trip and post-trip responsibilities in accordance with Department of Transportation (DOT) regulations and Sysco policies and procedures QUALIFICATIONS Education Degrees/Certificates Minimum Required: High School or GED or equivalent Experience One-year route delivery experience or applicable background driving a straight truck Valid Commercial Driver's License - Class B (Class A preferred) Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. Skills Operate vehicle in a variety of traffic and weather conditions. Meet or exceed minimum productivity levels established by the Company. Meet or exceed established cases per error goals Demonstrate strong customer relations and problem resolution skills. Effectively plan and organize work activities independent of direct supervision. Develop a good working knowledge of product and inventory control techniques and procedures. Maintain ongoing inter-department communications related to routing, safety, and customer relations. Proven ability to communicate articulately and perform simple arithmetic (Experience in handling money preferred) Building Customer Loyalty Managing Work Adaptability Building Trust Follow-up Communication OTHER INFORMATION Frequent lifting of product up to 50 lbs. during the shift, infrequent lifting to 80 lbs. Must be able to climb on and off the box of the truck Frequent bending, squatting, pushing, and pulling Must be able to work in confined spaces
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
06/19/2026
Full time
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Job Summary: Sysco has immediate job openings for dependable local CDL A Delivery Truck Driver to safely and efficiently operate a tractor-trailer and manually unload/deliver various products (meats, produce, frozen foods, groceries, dry goods, supplies, etc.) to customer locations on an assigned route schedule. Our truck drivers build relationships with each customer using their positive, friendly attitude and become familiar with their operations to meet needs and expectations. QUALIFICATIONS Minimum Requirements 21+ years of age. Must submit to a pre-employment background check and drug screen. License to drive - valid Class A Commercial Driver License (CDL) with a clean driving record. Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. Touch freight - may need to lift, push or move product weighing an average of 40-60 pounds and as much as 100 pounds repeatedly. Flexibility - overtime as required, weekends and holidays as business needs require. Preferred Requirements 1 year customer delivery experience preferred. 6 months hand cart/hand truck experience preferred. 6 months Food and Beverage experience preferred. 2 years consistent work history preferred. BENEFITS Excellent pay, including productivity incentives. Most Driver Trainees have daily routes and are home nightly. Paid vacation and holidays. Relocation Assistance Available - Certain Restrictions. Ongoing job skills and leadership development training. Career growth opportunities - we promote from within! New hires are eligible first day of the month following or coinciding with 31 days from date of hire. Comprehensive healthcare benefits. Generous retirement benefits. Employee discount programs. Service recognition and employee rewards. Discounts on Sysco stock (SYY). Referral programs. Safety programs. Tuition reimbursement. Uniforms. More benefits, too many to name. Sysco is more than just a place to work. Our passion for food and our customers has made us the industry leader. To remain on top, we will continue to think bigger, work harder and never give up. It takes a special kind of CDL A Delivery Truck Driver to work for Sysco. Are you ready to drive success? Click on the hyperlink to watch A Day in the Life of a Sysco Driver.
06/19/2026
Full time
Job Summary: Sysco has immediate job openings for dependable local CDL A Delivery Truck Driver to safely and efficiently operate a tractor-trailer and manually unload/deliver various products (meats, produce, frozen foods, groceries, dry goods, supplies, etc.) to customer locations on an assigned route schedule. Our truck drivers build relationships with each customer using their positive, friendly attitude and become familiar with their operations to meet needs and expectations. QUALIFICATIONS Minimum Requirements 21+ years of age. Must submit to a pre-employment background check and drug screen. License to drive - valid Class A Commercial Driver License (CDL) with a clean driving record. Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. Touch freight - may need to lift, push or move product weighing an average of 40-60 pounds and as much as 100 pounds repeatedly. Flexibility - overtime as required, weekends and holidays as business needs require. Preferred Requirements 1 year customer delivery experience preferred. 6 months hand cart/hand truck experience preferred. 6 months Food and Beverage experience preferred. 2 years consistent work history preferred. BENEFITS Excellent pay, including productivity incentives. Most Driver Trainees have daily routes and are home nightly. Paid vacation and holidays. Relocation Assistance Available - Certain Restrictions. Ongoing job skills and leadership development training. Career growth opportunities - we promote from within! New hires are eligible first day of the month following or coinciding with 31 days from date of hire. Comprehensive healthcare benefits. Generous retirement benefits. Employee discount programs. Service recognition and employee rewards. Discounts on Sysco stock (SYY). Referral programs. Safety programs. Tuition reimbursement. Uniforms. More benefits, too many to name. Sysco is more than just a place to work. Our passion for food and our customers has made us the industry leader. To remain on top, we will continue to think bigger, work harder and never give up. It takes a special kind of CDL A Delivery Truck Driver to work for Sysco. Are you ready to drive success? Click on the hyperlink to watch A Day in the Life of a Sysco Driver.
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
06/19/2026
Full time
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Contracting CDL-A Truck Drivers TOP PAY STARTS HERE - Solo drivers net up to $150,000/year; $10,000 OTR sign-on bonus SIMPLE TERMS. SOLID SUPPORT. - No down payment, no credit check, walkaway lease; set $0.99/gal fuel price TURN AMBITION INTO OWNERSHIP - Lease completion incentives, including custom colors and add-ons for your truck Why Drive for Hirschbach? Hirschbach is contracting CDL A truck drivers in your local area. We are not your typical trucking company. We are driver-focused, driver-first and we mean it. Driving for Hirschbach isn't just another job - it's THE job. We offer drivers industry-leading 24/7 support and our ultra-modern truck fleet comes with the latest features and technology. So if you have at least 6 months CDL-A truck driving experience, apply today to learn about options. You've tried the rest, now run with the best. CDL-A Truck Driver (1099) Job Overview Run solo or as an existing team. It's your route, your revenue, and your truck. The next step of your career growth starts here. Thru 6/30, new OTR hires eligible for $10,000 sign-on/stay bonus. Bonus applies to OTR Solos/Teams, Company or Lease and Regional roles. Earn up to $150,000 per year as a solo driver. Base CPM ranges from $1.17-$2.90, depending on length of haul. Earn more, faster. Earn paid orientation, earn safety and performance incentives up to $0.30/mi, and add accessorial pay to your base CPM. Team up and increase earnings. Pre-existing teams only. Refer a teammate and earn $1,200. Net average $210,000 - $248,000 per truck per year (up to $3.02/mi); all expenses are split. Minimum weekly pay guarantee. Drivers can count on $1,500 per week per driver (solo) or $3,000 per truck (teams) per week. Run 99% No-touch freight. Our routes are built to keep you moving, so you spend less time loading and more time rolling. Lease Purchase Details Flexible, friendly terms: No down payment, no credit check, walkaway lease. Fixed, discounted fuel rate: Hirschbach drivers pay $.99/gallon for fuel, regardless of price at pump. Full-service maintenance plan: Covers all mechanical parts for $0.10/mi. No out-of-pocket expenses! Affordable truck payments: average payments between $800-$900 per week. Trick My Truck: After 1 year, spec your truck your way with custom colors and add-ons. Run in Style and Comfort fully-specced Internationals and Freightliner Cascadias Large capacity refrigerator 24" SmartTV Heated and cooled seats Lane assist sensors All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. Driver Requirements Valid Class A CDL At least 23 years of age 6+ months verifiable CDL-A experience
06/19/2026
Full time
Contracting CDL-A Truck Drivers TOP PAY STARTS HERE - Solo drivers net up to $150,000/year; $10,000 OTR sign-on bonus SIMPLE TERMS. SOLID SUPPORT. - No down payment, no credit check, walkaway lease; set $0.99/gal fuel price TURN AMBITION INTO OWNERSHIP - Lease completion incentives, including custom colors and add-ons for your truck Why Drive for Hirschbach? Hirschbach is contracting CDL A truck drivers in your local area. We are not your typical trucking company. We are driver-focused, driver-first and we mean it. Driving for Hirschbach isn't just another job - it's THE job. We offer drivers industry-leading 24/7 support and our ultra-modern truck fleet comes with the latest features and technology. So if you have at least 6 months CDL-A truck driving experience, apply today to learn about options. You've tried the rest, now run with the best. CDL-A Truck Driver (1099) Job Overview Run solo or as an existing team. It's your route, your revenue, and your truck. The next step of your career growth starts here. Thru 6/30, new OTR hires eligible for $10,000 sign-on/stay bonus. Bonus applies to OTR Solos/Teams, Company or Lease and Regional roles. Earn up to $150,000 per year as a solo driver. Base CPM ranges from $1.17-$2.90, depending on length of haul. Earn more, faster. Earn paid orientation, earn safety and performance incentives up to $0.30/mi, and add accessorial pay to your base CPM. Team up and increase earnings. Pre-existing teams only. Refer a teammate and earn $1,200. Net average $210,000 - $248,000 per truck per year (up to $3.02/mi); all expenses are split. Minimum weekly pay guarantee. Drivers can count on $1,500 per week per driver (solo) or $3,000 per truck (teams) per week. Run 99% No-touch freight. Our routes are built to keep you moving, so you spend less time loading and more time rolling. Lease Purchase Details Flexible, friendly terms: No down payment, no credit check, walkaway lease. Fixed, discounted fuel rate: Hirschbach drivers pay $.99/gallon for fuel, regardless of price at pump. Full-service maintenance plan: Covers all mechanical parts for $0.10/mi. No out-of-pocket expenses! Affordable truck payments: average payments between $800-$900 per week. Trick My Truck: After 1 year, spec your truck your way with custom colors and add-ons. Run in Style and Comfort fully-specced Internationals and Freightliner Cascadias Large capacity refrigerator 24" SmartTV Heated and cooled seats Lane assist sensors All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. Driver Requirements Valid Class A CDL At least 23 years of age 6+ months verifiable CDL-A experience
Hiring CDL-A Truck Drivers STRONG PAY, STEADY DAYS - Earn $80,000 per year with CPM + stop pay RUN REGIONAL. RESET WEEKLY. - Flexible options with weekly home time BENEFITS FROM DAY ONE - Medical, dental, vision, and more start immediately Why Drive for Dollar General Fleet? We are hiring in and around the local Zanesville area! At Dollar General, drivers aren't just moving freight - they're supporting stores that communities rely on every day. We believe if we take care of our drivers, they'll take care of the road and their families. That's why we offer stable regional routes, strong pay, weekly home time, and full benefits starting Day 1. If you're looking for a driving job with consistency, respect, and long-term security, DG Fleet is where you belong. Company Truck Driver Job Overview Pay that shows up every week. Earn a projected $80,000 per year , with a base pay range of $0.62-$0.65CPM , plus up to $50 per stop , depending on the freight . Regional routes with weekly home time. Run dedicated regional routes supporting specific distribution centers and get home weekly, giving you predictable resets without sacrificing steady miles. Bring the family along. Pet and rider policies, so you can share the road with loved ones. Modern equipment and weekly pay. Drive new, well-maintained equipment, get paid every week, and earn extra through quarterly safety bonuses. Benefits from day 1 Medical coverage through BCBS, plus dental and vision Short- and long-term disability and life insurance 401(k) with company match Zero-cost rider policy - bring someone along Pet policy - because family comes in all forms Paid training and ongoing support All pay & bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. Driver Requirements Valid Class A CDL Must be 21 years of age 6+ months CDL A experience required Job Type: Full-time Work Location: On the road
06/19/2026
Full time
Hiring CDL-A Truck Drivers STRONG PAY, STEADY DAYS - Earn $80,000 per year with CPM + stop pay RUN REGIONAL. RESET WEEKLY. - Flexible options with weekly home time BENEFITS FROM DAY ONE - Medical, dental, vision, and more start immediately Why Drive for Dollar General Fleet? We are hiring in and around the local Zanesville area! At Dollar General, drivers aren't just moving freight - they're supporting stores that communities rely on every day. We believe if we take care of our drivers, they'll take care of the road and their families. That's why we offer stable regional routes, strong pay, weekly home time, and full benefits starting Day 1. If you're looking for a driving job with consistency, respect, and long-term security, DG Fleet is where you belong. Company Truck Driver Job Overview Pay that shows up every week. Earn a projected $80,000 per year , with a base pay range of $0.62-$0.65CPM , plus up to $50 per stop , depending on the freight . Regional routes with weekly home time. Run dedicated regional routes supporting specific distribution centers and get home weekly, giving you predictable resets without sacrificing steady miles. Bring the family along. Pet and rider policies, so you can share the road with loved ones. Modern equipment and weekly pay. Drive new, well-maintained equipment, get paid every week, and earn extra through quarterly safety bonuses. Benefits from day 1 Medical coverage through BCBS, plus dental and vision Short- and long-term disability and life insurance 401(k) with company match Zero-cost rider policy - bring someone along Pet policy - because family comes in all forms Paid training and ongoing support All pay & bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. Driver Requirements Valid Class A CDL Must be 21 years of age 6+ months CDL A experience required Job Type: Full-time Work Location: On the road
Mondel z Global LLC, a leading global snacking company is now hiring a CDL A Local Delivery Driver in Belcamp, MD. This is a Union role with start times from 12am-5am. The driver will deliver products, including temperature-controlled foods safely and on time within the Belcamp area. You will stock your truck with our products, drive to stores and warehouses and unload at locations where needed and be back home every day. Mondel z is known for their iconic brands and is proud to be recognized on the following lists: Most Innovative Companies, on the Fortune 500, World's Most Admired Companies, Best Place to Work for LGBTQ Equality and more. Join our team and accelerate your career!Home Daily - Reliable Routes - Competitive PayCompensation: Hourly Rate: $32.25 Competitive hourly rate with 40 average hours per week Paid via direct deposit weeklyBenefits & Perks: Excellent Benefits beginning 1st of the month following 60 days of employment Medical, Prescription Drug, Dental, and Vision Wellness Programs Company-Paid Life Insurance Short-term and Long-term Disability Insurance Long-term Care Insurance Accidental Death and Dismemberment Insurance Healthcare Savings Account (HSA) Healthcare and Dependent care account (DCA) Flexible spending account (FSA) 401(k) Paid Time Off/Vacation Paid Sick Time Paid Company Holidays Bonus week/awards Paid orientation, including travel expenses Paid training programs Tuition reimbursement Perks: EZ / Toll Pass, GPS, 24/7 dispatch, roadside assistance, uniforms, cell phones, restaurant/retail discounts, home and auto insurance.Home Time, Routes, & Schedule: Home every day Schedule: Monday-Friday, 5 days per week Starting times: 12am-5am, Possible afternoon work with shuttles Route: Local, MD 10-16 stops on average Delivery routes can require routine lifting and stepping on and off the truck at each stopEquipment: Single axel tractor 48 foot trailer Automatic TransmissionQualifications: Must be at least 21 years of age Must have a valid CDL A license 2 years driving experience required Proven experience of safe driving behavior and no serious driving convictions in the last 5 years. All accidents and moving violations will be reviewed. Must have no DUIs/ OWIs within the last 5 years. Must be registered with the FMCSA's Drug and Alcohol Clearinghouse. Must be able to successfully pass DOT pre-employment drug test, DOT physical, MVR and national background screen. Basic understanding of temperature-controlled food transportation preferred. Able to use smart phones or tablets and ELD for logging positions and driving times Display flexibility toward daily changing routes and working times. Possess a great customer-oriented attitude, displaying our values to the customers you deliver goods to. General understanding of vehicle mechanics to communicate problems in case of breakdowns and to perform basic repairs yourself Driver should live within 50 miles of Belcamp, MD Mondel z Global LLC is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran status, sexual orientation, gender identity, gender expression, genetic information, or any other characteristic protected by law. Applicants who require accommodation to participate in the job application process may contact View phone number on click.appcast.io for assistance.
06/19/2026
Mondel z Global LLC, a leading global snacking company is now hiring a CDL A Local Delivery Driver in Belcamp, MD. This is a Union role with start times from 12am-5am. The driver will deliver products, including temperature-controlled foods safely and on time within the Belcamp area. You will stock your truck with our products, drive to stores and warehouses and unload at locations where needed and be back home every day. Mondel z is known for their iconic brands and is proud to be recognized on the following lists: Most Innovative Companies, on the Fortune 500, World's Most Admired Companies, Best Place to Work for LGBTQ Equality and more. Join our team and accelerate your career!Home Daily - Reliable Routes - Competitive PayCompensation: Hourly Rate: $32.25 Competitive hourly rate with 40 average hours per week Paid via direct deposit weeklyBenefits & Perks: Excellent Benefits beginning 1st of the month following 60 days of employment Medical, Prescription Drug, Dental, and Vision Wellness Programs Company-Paid Life Insurance Short-term and Long-term Disability Insurance Long-term Care Insurance Accidental Death and Dismemberment Insurance Healthcare Savings Account (HSA) Healthcare and Dependent care account (DCA) Flexible spending account (FSA) 401(k) Paid Time Off/Vacation Paid Sick Time Paid Company Holidays Bonus week/awards Paid orientation, including travel expenses Paid training programs Tuition reimbursement Perks: EZ / Toll Pass, GPS, 24/7 dispatch, roadside assistance, uniforms, cell phones, restaurant/retail discounts, home and auto insurance.Home Time, Routes, & Schedule: Home every day Schedule: Monday-Friday, 5 days per week Starting times: 12am-5am, Possible afternoon work with shuttles Route: Local, MD 10-16 stops on average Delivery routes can require routine lifting and stepping on and off the truck at each stopEquipment: Single axel tractor 48 foot trailer Automatic TransmissionQualifications: Must be at least 21 years of age Must have a valid CDL A license 2 years driving experience required Proven experience of safe driving behavior and no serious driving convictions in the last 5 years. All accidents and moving violations will be reviewed. Must have no DUIs/ OWIs within the last 5 years. Must be registered with the FMCSA's Drug and Alcohol Clearinghouse. Must be able to successfully pass DOT pre-employment drug test, DOT physical, MVR and national background screen. Basic understanding of temperature-controlled food transportation preferred. Able to use smart phones or tablets and ELD for logging positions and driving times Display flexibility toward daily changing routes and working times. Possess a great customer-oriented attitude, displaying our values to the customers you deliver goods to. General understanding of vehicle mechanics to communicate problems in case of breakdowns and to perform basic repairs yourself Driver should live within 50 miles of Belcamp, MD Mondel z Global LLC is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran status, sexual orientation, gender identity, gender expression, genetic information, or any other characteristic protected by law. Applicants who require accommodation to participate in the job application process may contact View phone number on click.appcast.io for assistance.
TRUCK DRIVING JOBS: WE ARE HIRING DRIVERS! We're a Certified Top Pay Carrier and the top 50 percent of our drivers average $104,774 per year. NOW HIRING: Job Description: Drivers who want to travel will see the country on the Hunt Transportation national OTR fleets. These are our highest mileage fleets and home to our top-earning drivers. Salary: Top 50% average $104,774 per year CPM: Starting pay $.68 to $.71 cpm Experience: One-year verifiable tractor trailer experience with a class A CDL PUT YOURSELF IN THE DRIVER S SEAT OF YOUR CAREER Apply Online below or Call to pre-qualify over the phone!
06/19/2026
Full time
TRUCK DRIVING JOBS: WE ARE HIRING DRIVERS! We're a Certified Top Pay Carrier and the top 50 percent of our drivers average $104,774 per year. NOW HIRING: Job Description: Drivers who want to travel will see the country on the Hunt Transportation national OTR fleets. These are our highest mileage fleets and home to our top-earning drivers. Salary: Top 50% average $104,774 per year CPM: Starting pay $.68 to $.71 cpm Experience: One-year verifiable tractor trailer experience with a class A CDL PUT YOURSELF IN THE DRIVER S SEAT OF YOUR CAREER Apply Online below or Call to pre-qualify over the phone!
Job Summary: Sysco has immediate job openings for dependable local CDL A Delivery Truck Driver to safely and efficiently operate a tractor-trailer and manually unload/deliver various products (meats, produce, frozen foods, groceries, dry goods, supplies, etc.) to customer locations on an assigned route schedule. Our truck drivers build relationships with each customer using their positive, friendly attitude and become familiar with their operations to meet needs and expectations. QUALIFICATIONS Minimum Requirements 21+ years of age. Must submit to a pre-employment background check and drug screen. License to drive - valid Class A Commercial Driver License (CDL) with a clean driving record. Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. Touch freight - may need to lift, push or move product weighing an average of 40-60 pounds and as much as 100 pounds repeatedly. Flexibility - overtime as required, weekends and holidays as business needs require. Preferred Requirements 1 year customer delivery experience preferred. 6 months hand cart/hand truck experience preferred. 6 months Food and Beverage experience preferred. 2 years consistent work history preferred. BENEFITS Excellent pay, including productivity incentives. Most Driver Trainees have daily routes and are home nightly. Paid vacation and holidays. Ongoing job skills and leadership development training. Career growth opportunities - we promote from within! New hires are eligible first day of the month following or coinciding with 31 days from date of hire. Comprehensive healthcare benefits. Generous retirement benefits. Employee discount programs. Service recognition and employee rewards. Discounts on Sysco stock (SYY). Referral programs. Safety programs. Tuition reimbursement. Uniforms. More benefits, too many to name. Sysco is more than just a place to work. Our passion for food and our customers has made us the industry leader. To remain on top, we will continue to think bigger, work harder and never give up. It takes a special kind of CDL A Delivery Truck Driver to work for Sysco. Are you ready to drive success? Click on the hyperlink to watch A Day in the Life of a Sysco Driver.
06/19/2026
Full time
Job Summary: Sysco has immediate job openings for dependable local CDL A Delivery Truck Driver to safely and efficiently operate a tractor-trailer and manually unload/deliver various products (meats, produce, frozen foods, groceries, dry goods, supplies, etc.) to customer locations on an assigned route schedule. Our truck drivers build relationships with each customer using their positive, friendly attitude and become familiar with their operations to meet needs and expectations. QUALIFICATIONS Minimum Requirements 21+ years of age. Must submit to a pre-employment background check and drug screen. License to drive - valid Class A Commercial Driver License (CDL) with a clean driving record. Commercial Vehicle Drivers must have the ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records. Touch freight - may need to lift, push or move product weighing an average of 40-60 pounds and as much as 100 pounds repeatedly. Flexibility - overtime as required, weekends and holidays as business needs require. Preferred Requirements 1 year customer delivery experience preferred. 6 months hand cart/hand truck experience preferred. 6 months Food and Beverage experience preferred. 2 years consistent work history preferred. BENEFITS Excellent pay, including productivity incentives. Most Driver Trainees have daily routes and are home nightly. Paid vacation and holidays. Ongoing job skills and leadership development training. Career growth opportunities - we promote from within! New hires are eligible first day of the month following or coinciding with 31 days from date of hire. Comprehensive healthcare benefits. Generous retirement benefits. Employee discount programs. Service recognition and employee rewards. Discounts on Sysco stock (SYY). Referral programs. Safety programs. Tuition reimbursement. Uniforms. More benefits, too many to name. Sysco is more than just a place to work. Our passion for food and our customers has made us the industry leader. To remain on top, we will continue to think bigger, work harder and never give up. It takes a special kind of CDL A Delivery Truck Driver to work for Sysco. Are you ready to drive success? Click on the hyperlink to watch A Day in the Life of a Sysco Driver.
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
06/19/2026
Full time
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
06/19/2026
Full time
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
06/19/2026
Full time
Pay: up to $22.50-$26.50 per hour, based on experience. 2 Shifts available- Day Shift: Sunday - Tuesday, 6AM - 6PM Night Shift (Preferred): Sunday - Tuesday, 6PM - 6AM $2/Hour shift differential on night shift. Uniforms Paid For $600 Annual Tool Allowance Annual Boot Allowance Training provided - OEM training, Thermo King Training, EPA training Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Road Mechanic US-MD-Finksburg Job ID: Category: Maintenance Maryland Division/HTI Overview Maryland Division/HTI, a division of H&K Group, Inc. is looking for a Road Mechanic to repair and maintain diesel and gasoline heavy equipment and trucks in the field for our Western PA divisions. The ideal candidate is energetic, self-motivated, organized, competent, and professional. Pay Range: $18-$40 an hour. Pay is depending on skill level. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Company vehicle Responsibilities Essential Duties and Responsibilities Perform all work adhering to OSHA, PA and DoT regulations, and H&K Safety policies Drive to various locations in the Western PA regions for work. Reviews job orders and observes and listens to equipment in operators/truck drivers/shop leaders to determine malfunction and to plan work procedures. Identify parts for repairs or replacement for all systems on equipment/trucks when needed. Examines protective guards, loose bolts and specified safety devices on equipment/trucks and makes adjustments. Dismantles equipment/trucks to examine parts for defect or to remove defective part. Replaces defective part with new part or repairs or reproduces part from various kinds of metal. Assembles and test operates machine or test drive trucks to verify correction of malfunction and to confirm that it meets manufactures specifications. Overhauls gas or diesel engines. Performs diagnostics through the use of computers and carious equipment. Performs front end inspection and alignments. Other duties as assigned Qualifications Required Skills, Education, and Experience High school diploma or equivalent (such as the GED) from an accredited educational institution OR relevant experience and/or training CDL B Clean driving record Customer Service and Teamwork General computer knowledge as well as caterpillar software (ET &SIS) Ability to use mechanics hand tools, torch, and welder Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience Related experience and/or training High school diploma or equivalent (such as the GED) from an accredited educational institution Technical school or college in the heavy equipment field Experience working in heavy civil construction, road construction, or quarries CDL A OSHA, MSHA, or other relevant safety certifications Physical Demands Occasionally required to stand, walk, or sit Climb, balance, stoop, kneel, crouch or crawl Drive up to two hours Use hands to finger or feel Talk and hear Occasionally lift and/or move up to 75 pounds Work Environment Occasional exposure to Moving parts Fumes and airborne particles Noise level is loud at times At times required to work outdoors in all environments Hours regularly exceed 40 hours a week and 8 hours a day H&K provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that our strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits ! Compensation details: 18-40 Hourly Wage PIfcab331e9d08-9708
06/19/2026
Full time
H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Road Mechanic US-MD-Finksburg Job ID: Category: Maintenance Maryland Division/HTI Overview Maryland Division/HTI, a division of H&K Group, Inc. is looking for a Road Mechanic to repair and maintain diesel and gasoline heavy equipment and trucks in the field for our Western PA divisions. The ideal candidate is energetic, self-motivated, organized, competent, and professional. Pay Range: $18-$40 an hour. Pay is depending on skill level. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Company vehicle Responsibilities Essential Duties and Responsibilities Perform all work adhering to OSHA, PA and DoT regulations, and H&K Safety policies Drive to various locations in the Western PA regions for work. Reviews job orders and observes and listens to equipment in operators/truck drivers/shop leaders to determine malfunction and to plan work procedures. Identify parts for repairs or replacement for all systems on equipment/trucks when needed. Examines protective guards, loose bolts and specified safety devices on equipment/trucks and makes adjustments. Dismantles equipment/trucks to examine parts for defect or to remove defective part. Replaces defective part with new part or repairs or reproduces part from various kinds of metal. Assembles and test operates machine or test drive trucks to verify correction of malfunction and to confirm that it meets manufactures specifications. Overhauls gas or diesel engines. Performs diagnostics through the use of computers and carious equipment. Performs front end inspection and alignments. Other duties as assigned Qualifications Required Skills, Education, and Experience High school diploma or equivalent (such as the GED) from an accredited educational institution OR relevant experience and/or training CDL B Clean driving record Customer Service and Teamwork General computer knowledge as well as caterpillar software (ET &SIS) Ability to use mechanics hand tools, torch, and welder Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience Related experience and/or training High school diploma or equivalent (such as the GED) from an accredited educational institution Technical school or college in the heavy equipment field Experience working in heavy civil construction, road construction, or quarries CDL A OSHA, MSHA, or other relevant safety certifications Physical Demands Occasionally required to stand, walk, or sit Climb, balance, stoop, kneel, crouch or crawl Drive up to two hours Use hands to finger or feel Talk and hear Occasionally lift and/or move up to 75 pounds Work Environment Occasional exposure to Moving parts Fumes and airborne particles Noise level is loud at times At times required to work outdoors in all environments Hours regularly exceed 40 hours a week and 8 hours a day H&K provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that our strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits ! Compensation details: 18-40 Hourly Wage PIfcab331e9d08-9708
TRUCK DRIVING JOBS: WE ARE HIRING DRIVERS! We're a Certified Top Pay Carrier and the top 50 percent of our drivers average $104,774 per year. NOW HIRING: Job Description: Drivers from the Bluegrass State will find plenty of green with Hunt Transportation with our national OTR. Salary: Top 50% average $104,774 per year CPM: Starting pay $.68 to $.71 cpm Experience: One-year verifiable tractor trailer experience with a class A CDL PUT YOURSELF IN THE DRIVER S SEAT OF YOUR CAREER Apply Online below or Call to pre-qualify over the phone!
06/19/2026
Full time
TRUCK DRIVING JOBS: WE ARE HIRING DRIVERS! We're a Certified Top Pay Carrier and the top 50 percent of our drivers average $104,774 per year. NOW HIRING: Job Description: Drivers from the Bluegrass State will find plenty of green with Hunt Transportation with our national OTR. Salary: Top 50% average $104,774 per year CPM: Starting pay $.68 to $.71 cpm Experience: One-year verifiable tractor trailer experience with a class A CDL PUT YOURSELF IN THE DRIVER S SEAT OF YOUR CAREER Apply Online below or Call to pre-qualify over the phone!
Class A CDL Truck Drivers - Solo 2 for M3 Freight Solutions Shifts: Morning, Afternoon, Overnight, Evening, Weekday and/or Weekend Locations: Based in Phoenix, Arizona with routes to New Mexico, Texas, Nevada, Southern California, and Utah Compensation: Starting pay $24 per hour + OT after 40 hours We are hiring Class A CDL Drivers for our rapidly expanding needs. M3 Freight Solutions is seeking enthusiastic, motivated Class A CDL drivers based out of Phoenix, Arizona for the Amazon Freight Partner Program. As a CDL Driver with M3 Freight Solutions, you will be operating tractors equipped with top safety technology. Our deliveries are 100% no-touch freight (drop-and-hook only). You will not be employed by Amazon; instead, you will be working directly for a regional transportation company that partners with Amazon. If you have a valid CDL A license, are at least 21 years of age, and have a clean driving record, then we want you to apply now. We are making on-the-spot job offers contingent on meeting eligibility and background check requirements. What you'll do: As a CDL Driver, you will play a key role in keeping our commitment to exceed customer expectations and ensuring customer orders, large or small, are delivered on time and at the right place. You can expect consistent work with a minimum of 40 hours per week, home every other day, and flexible scheduling. Why you'll Love Working for an Amazon Freight Partner: • Earn more: competitive compensation starting at $24 per hour + OT after 40 hours • Compelling Benefits: PTO, Health (50% Employer match), Dental and Vision (100% Employer cover), Employee Group Life insurance (100% Employer cover) for all full-time employees. We also provide assistance for Daycare, Mental Health Assistance, and Payactiv Advance Pay. • Great Work Life Balance: Consistent and dedicated routes with flexible schedules. Home every other day with consecutive days off. • Team environment: a fun, fast-paced, and supportive company culture that prioritizes driver development and growth. We treat drivers like family. What you'll need: • Must be at least 21 years old • Have a valid Class A Commercial Driver License (CDL) • Must be able to speak, read, and write in English to communicate with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records • No current CDL suspension or revocation • Clean Motor Vehicle Record (MVR) and good DAC Report • Successfully pass a background check • Must pass a DOT physical and pre-employment drug screen • Ability to effectively learn and operate a GPS • Must be able to use handheld technology and smartphone applications • Must be flexible with work schedule (Day/Evening/Night shifts/Weekends) We are an Equal Opportunity Employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religious beliefs, sex (including sexual orientation), or genetic information (including family medical history). Solo 2
06/19/2026
Class A CDL Truck Drivers - Solo 2 for M3 Freight Solutions Shifts: Morning, Afternoon, Overnight, Evening, Weekday and/or Weekend Locations: Based in Phoenix, Arizona with routes to New Mexico, Texas, Nevada, Southern California, and Utah Compensation: Starting pay $24 per hour + OT after 40 hours We are hiring Class A CDL Drivers for our rapidly expanding needs. M3 Freight Solutions is seeking enthusiastic, motivated Class A CDL drivers based out of Phoenix, Arizona for the Amazon Freight Partner Program. As a CDL Driver with M3 Freight Solutions, you will be operating tractors equipped with top safety technology. Our deliveries are 100% no-touch freight (drop-and-hook only). You will not be employed by Amazon; instead, you will be working directly for a regional transportation company that partners with Amazon. If you have a valid CDL A license, are at least 21 years of age, and have a clean driving record, then we want you to apply now. We are making on-the-spot job offers contingent on meeting eligibility and background check requirements. What you'll do: As a CDL Driver, you will play a key role in keeping our commitment to exceed customer expectations and ensuring customer orders, large or small, are delivered on time and at the right place. You can expect consistent work with a minimum of 40 hours per week, home every other day, and flexible scheduling. Why you'll Love Working for an Amazon Freight Partner: • Earn more: competitive compensation starting at $24 per hour + OT after 40 hours • Compelling Benefits: PTO, Health (50% Employer match), Dental and Vision (100% Employer cover), Employee Group Life insurance (100% Employer cover) for all full-time employees. We also provide assistance for Daycare, Mental Health Assistance, and Payactiv Advance Pay. • Great Work Life Balance: Consistent and dedicated routes with flexible schedules. Home every other day with consecutive days off. • Team environment: a fun, fast-paced, and supportive company culture that prioritizes driver development and growth. We treat drivers like family. What you'll need: • Must be at least 21 years old • Have a valid Class A Commercial Driver License (CDL) • Must be able to speak, read, and write in English to communicate with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records • No current CDL suspension or revocation • Clean Motor Vehicle Record (MVR) and good DAC Report • Successfully pass a background check • Must pass a DOT physical and pre-employment drug screen • Ability to effectively learn and operate a GPS • Must be able to use handheld technology and smartphone applications • Must be flexible with work schedule (Day/Evening/Night shifts/Weekends) We are an Equal Opportunity Employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religious beliefs, sex (including sexual orientation), or genetic information (including family medical history). Solo 2
CDL-A Dry Van Truck Driving Jobs available now! Apply today and within 24 hours you'll receive multiple job offers. Earn $85,000-$110,000 and up per year based on position. Simply select the driving job that offers you what is most important.Higher pay, increased benefits or more home-time: You choose.Avg. Company Driver Job Offers Salary: $85,000-$110,000+Avg. Owner Operator Job Offers Salary: $200,000-$325,000+ Apply now to receive your job offers!Pandologic. Category: ,
06/19/2026
Full time
CDL-A Dry Van Truck Driving Jobs available now! Apply today and within 24 hours you'll receive multiple job offers. Earn $85,000-$110,000 and up per year based on position. Simply select the driving job that offers you what is most important.Higher pay, increased benefits or more home-time: You choose.Avg. Company Driver Job Offers Salary: $85,000-$110,000+Avg. Owner Operator Job Offers Salary: $200,000-$325,000+ Apply now to receive your job offers!Pandologic. Category: ,
Midwest Logistics Systems Dedicated truck driver Average pay: $1,400-$1,600 weekly Home time: Daily Experience: 3 months or greater CDL experience Overview Have a predictable daily home time work schedule. Drive the same out-and-back dedicated route and work with the same customers every day. Haul automotive parts in dry van trailers with newer trucks. Haul no-touch, mostly drop-and-hook freight. Work with onsite leaders and dispatch. Pay and bonus potential Route and detention pay. $5,000 sign-on bonus for experienced drivers. Safety and performance bonuses of up to $600 per quarter. Longevity bonus of up to $750 per quarter. Weekly paychecks. Qualifications Valid Class A Commercial Driver's License (CDL). Live within 50 miles of Little Rock, AR. Minimum 3 months of Class A driving experience. Additional benefits Medical, dental and vision insurance. Disability and life insurance. 401(k) savings plan with company match. Ten paid holidays and paid time off. Company-provided uniforms. Opportunity to work with a dedicated, professional team that is committed to your safety and success. MLS' inclusive culture Our history has taught us that treating everyone with dignity and respect is vital to our ongoing success. We embrace and seek out diversity that is inclusive of thought, race, ethnicity, national origin, sex, gender, gender expression, age, religion, sexual orientation, ability, medical condition, veteran or military status, experience and background. This diversity and openness ensures all associates have equal access to opportunities and resources to contribute fully to the organization's success, and it fuels innovation, improves strategic thinking and cultivates leadership. Any applicant may request a reasonable accommodation to complete a job application, pre-employment testing, or job interview or to otherwise participate in the hiring process consistent with the Americans with Disabilities Act (ADA) by contacting their Recruiter, Human Resources Business Partner, and/or Human Resources Leave Administration. A wholly owned subsidiary of Schneider, Midwest Logistics Systems, Ltd. (MLS) is operated separately from Schneider with its own operating procedures, qualification requirements, training program, pay packages and benefits. If you have any questions about becoming an MLS driver, please contact an MLS recruiter at . Job MLS Driver Schedule FULLTIME Sign On Bonus 5000 Compensation details: PI0bf10-2887
06/19/2026
Full time
Midwest Logistics Systems Dedicated truck driver Average pay: $1,400-$1,600 weekly Home time: Daily Experience: 3 months or greater CDL experience Overview Have a predictable daily home time work schedule. Drive the same out-and-back dedicated route and work with the same customers every day. Haul automotive parts in dry van trailers with newer trucks. Haul no-touch, mostly drop-and-hook freight. Work with onsite leaders and dispatch. Pay and bonus potential Route and detention pay. $5,000 sign-on bonus for experienced drivers. Safety and performance bonuses of up to $600 per quarter. Longevity bonus of up to $750 per quarter. Weekly paychecks. Qualifications Valid Class A Commercial Driver's License (CDL). Live within 50 miles of Little Rock, AR. Minimum 3 months of Class A driving experience. Additional benefits Medical, dental and vision insurance. Disability and life insurance. 401(k) savings plan with company match. Ten paid holidays and paid time off. Company-provided uniforms. Opportunity to work with a dedicated, professional team that is committed to your safety and success. MLS' inclusive culture Our history has taught us that treating everyone with dignity and respect is vital to our ongoing success. We embrace and seek out diversity that is inclusive of thought, race, ethnicity, national origin, sex, gender, gender expression, age, religion, sexual orientation, ability, medical condition, veteran or military status, experience and background. This diversity and openness ensures all associates have equal access to opportunities and resources to contribute fully to the organization's success, and it fuels innovation, improves strategic thinking and cultivates leadership. Any applicant may request a reasonable accommodation to complete a job application, pre-employment testing, or job interview or to otherwise participate in the hiring process consistent with the Americans with Disabilities Act (ADA) by contacting their Recruiter, Human Resources Business Partner, and/or Human Resources Leave Administration. A wholly owned subsidiary of Schneider, Midwest Logistics Systems, Ltd. (MLS) is operated separately from Schneider with its own operating procedures, qualification requirements, training program, pay packages and benefits. If you have any questions about becoming an MLS driver, please contact an MLS recruiter at . Job MLS Driver Schedule FULLTIME Sign On Bonus 5000 Compensation details: PI0bf10-2887
JRayl Transport is hiring CDL A Regional Dry Van Drivers in North Liberty, IN, home weekends ! J. Rayl is a large, asset-based logistics company that has been family owned and operated for 35 years. Founders Tim Rayl and Jim St. John began the company with only five trucks on a small private farm in Akron, OH. Since its humble beginnings, J. Rayl has grown tremendously but still maintains a focus of creating a unique family environment for their CDL Class A Truck Drivers. Compensation: Average weekly pay: $1,500 Base up 55-60 CPM with an average of 2,400-2,800 miles weekly Pay based on experience & performance Bonuses Military Veteran bonus 2 CPM Safety Bonus: $250 per quarter with no violations Safety Bonus: NO VIOLATION inspections - Level 1: $500, Level 2: $250, Level 3: $100 Referral Bonus: $1,250 paid out after referral runs their first load - After 90 days of employment Extra $0.25 for every mile over 10,000 in a month - paid out the following March Paid via direct deposit weekly (2 week hold back) Perks & Benefits: Great company benefits starting 1 st of the month following 60 days of employment Medical, Dental, Vision Insurance, and Company Paid Long Term Disability & Life Insurance Prescription Drug Coverage Life Insurance Disability Insurance 401K with 50% company match up to 4% 4 Paid Company Holidays: Memorial Day, Independence Day, Thanksgiving, & Christmas Paid Time Off Accrued Evenly over calendar year (5 Days at Start of the Year) January, February 5 days March, April 4 days May, June, July 3 days August, September 2 days October, November 1 day December 0 days Tuition reimbursement up to $5,000 & mentor program Paid 6 week finishing program for new grads Paid training and paid orientation ($200/day) Orientation at each terminal Fuel Cards Rider program: Spouse and children 10+ years of age - Adults & legal guardian of child 10+ (Takes effect after 90 days of employment + 1 year experience) No Slip seating Home Time, Route & Schedule Home Time: Home Every Weekend Schedule: Sunday through Friday (5.5 days week). Home every weekend Flexible schedule available (Ex: M-F or T-Sat) Route: Varies by customer Level of Touch: All No Touch Freight Equipment 2020 or newer International/Kenworth Packard (Kenworth) S13 Engine/T14 Transmission (International) Inverters in all trucks Samsara ELD Heaters/Double Bunks Governed speed: 68 mph Long Haul 75 mph Qualifications Must have valid CDL A License Must be at least 21 years of age Must have a minimum of 12 months verifiable tractor-trailer driving experience with a clean driving record within last 12 months (no more than 2 violations) Must meet Department of Transportation (DOT) testing and physical requirements and be knowledgeable of DOT regulations Must be able to pass a required pre-employment drug screen Hiring Radius: Preferred within 50 miles of North Liberty, IN or be willing to relocate for this position JRayl Transport has over 350 tractors, 1,400 trailers and over 350 employees covering the eastern United States with locations in Ohio, Indiana, Texas and Virginia. With over 350 employees and multiple strategically placed locations, JRayl is able to meet the needs of a growing number of shippers, carriers, and drivers in the U.S. and around the world. Most importantly, JRayl is a company that stands behind our word and our work. Our family of drivers enjoy mileage or salary pay packages, weekends home, benefits, paid time off and 401k. We have local, regional, and over the road opportunities available today! Let JRayl Welcome YOU Home!
06/19/2026
Full time
JRayl Transport is hiring CDL A Regional Dry Van Drivers in North Liberty, IN, home weekends ! J. Rayl is a large, asset-based logistics company that has been family owned and operated for 35 years. Founders Tim Rayl and Jim St. John began the company with only five trucks on a small private farm in Akron, OH. Since its humble beginnings, J. Rayl has grown tremendously but still maintains a focus of creating a unique family environment for their CDL Class A Truck Drivers. Compensation: Average weekly pay: $1,500 Base up 55-60 CPM with an average of 2,400-2,800 miles weekly Pay based on experience & performance Bonuses Military Veteran bonus 2 CPM Safety Bonus: $250 per quarter with no violations Safety Bonus: NO VIOLATION inspections - Level 1: $500, Level 2: $250, Level 3: $100 Referral Bonus: $1,250 paid out after referral runs their first load - After 90 days of employment Extra $0.25 for every mile over 10,000 in a month - paid out the following March Paid via direct deposit weekly (2 week hold back) Perks & Benefits: Great company benefits starting 1 st of the month following 60 days of employment Medical, Dental, Vision Insurance, and Company Paid Long Term Disability & Life Insurance Prescription Drug Coverage Life Insurance Disability Insurance 401K with 50% company match up to 4% 4 Paid Company Holidays: Memorial Day, Independence Day, Thanksgiving, & Christmas Paid Time Off Accrued Evenly over calendar year (5 Days at Start of the Year) January, February 5 days March, April 4 days May, June, July 3 days August, September 2 days October, November 1 day December 0 days Tuition reimbursement up to $5,000 & mentor program Paid 6 week finishing program for new grads Paid training and paid orientation ($200/day) Orientation at each terminal Fuel Cards Rider program: Spouse and children 10+ years of age - Adults & legal guardian of child 10+ (Takes effect after 90 days of employment + 1 year experience) No Slip seating Home Time, Route & Schedule Home Time: Home Every Weekend Schedule: Sunday through Friday (5.5 days week). Home every weekend Flexible schedule available (Ex: M-F or T-Sat) Route: Varies by customer Level of Touch: All No Touch Freight Equipment 2020 or newer International/Kenworth Packard (Kenworth) S13 Engine/T14 Transmission (International) Inverters in all trucks Samsara ELD Heaters/Double Bunks Governed speed: 68 mph Long Haul 75 mph Qualifications Must have valid CDL A License Must be at least 21 years of age Must have a minimum of 12 months verifiable tractor-trailer driving experience with a clean driving record within last 12 months (no more than 2 violations) Must meet Department of Transportation (DOT) testing and physical requirements and be knowledgeable of DOT regulations Must be able to pass a required pre-employment drug screen Hiring Radius: Preferred within 50 miles of North Liberty, IN or be willing to relocate for this position JRayl Transport has over 350 tractors, 1,400 trailers and over 350 employees covering the eastern United States with locations in Ohio, Indiana, Texas and Virginia. With over 350 employees and multiple strategically placed locations, JRayl is able to meet the needs of a growing number of shippers, carriers, and drivers in the U.S. and around the world. Most importantly, JRayl is a company that stands behind our word and our work. Our family of drivers enjoy mileage or salary pay packages, weekends home, benefits, paid time off and 401k. We have local, regional, and over the road opportunities available today! Let JRayl Welcome YOU Home!
Crew Lead Tree Climber What We Offer At SavATree, your success is our priority. Here's how we invest in you: Compensation : Competitive pay based on experience, skill level, and responsibilities. Benefits : Health and dental insurance, paid time off, 401(k) Savings Plan, Flexible Spending Plan, and an Equipment Account. Time Off: Time-off to support your work/life balance Training & Development : Extensive training opportunities, including leadership development and continuing education support in the industry. Tools for Success : Access to industry-leading equipment, climbing gear, and safety-focused crews. Team Environment : Our Tree Care Team works alongside some of the best trained and equipped teams in the industry, with an emphasis on quality and safety. About SavATree SavATree was founded 45 years ago with a mission to preserve trees and protect the natural landscapes we all enjoy. Since then, we've grown into a nationwide leader in tree, shrub, and lawn care services. We're a values-driven organization built on teamwork, integrity, respect, and a shared commitment to the environment. We pride ourselves on offering a collaborative and supportive work culture where your expertise is valued, and your career path is clear. As we like to say: When you work here, you thrive here. About the Role As a Tree Climber with SavATree, you'll be a key member of our General Tree Care Team . This team works on a variety of tree care tasks, including pruning, removals, and cabling. You'll apply your expertise in climbing, pruning, and safety to ensure the health and beauty of our clients' landscapes. The Crew Lead position offers additional responsibilities for those who demonstrate leadership qualities and want to guide a team. In this role, you will: Perform high-quality tree care services, including pruning, removals, and cabling for trees and shrubs Climb trees safely using proper techniques, ropes, saddle, and ladders Operate chainsaws, aerial lifts (bucket trucks), and other tree care equipment effectively Apply ANSI A300 Pruning Standards and ANSI Z safety practices in all tasks Ensure proper pruning cuts and techniques, preserving the health and structure of trees Assist in tree removals and utilize ropes, spikes, and other equipment as needed for safe takedowns Identify hazards and perform safety checks before, during, and after each job Perform aerial rescues if necessary, ensuring safety in high-risk situations Maintain strong communication with team members and clients, ensuring excellent service and safety at all times Take ownership of your role, contributing to a positive, safety-focused team culture What We're Looking For What is Essential: Valid U.S. driver's license (CDL is a plus) Authorization to work legally in the U.S. Passion for working outdoors and commitment to environmental stewardship Experience: Proficient in proper pruning techniques for large shade trees and ornamentals Strong knowledge of tree and shrub species, including their characteristics Comfortable climbing without spurs Skilled in adhering to tree care safety standards Experienced with chainsaws, aerial lifts (bucket trucks), and other essential tree care equipment Technical Knowledge: Expertise in proper pruning cuts, branch collars, and chainsaw operations (for trees up to 50 feet) Familiarity with ANSI A300 Pruning Standards and ANSI Z safety guidelines Ability to perform aerial rescues and apply various climbing techniques Comfortable working with a diverse range of tree species, including Oaks, Maples, Hemlocks, Pines, and more Physical Requirements: Must be able to lift and move up to 50 pounds frequently Ability to safely perform climbing and aerial work in varying conditions Experience with tree removal, including knowing when to use ropes or spikes for safe takedown This job requires physical stamina to meet the demands of climbing, lifting, and performing tasks outdoors. You'll frequently lift and move heavy equipment and must be comfortable working in a variety of weather conditions. Equal Opportunity At SavATree, we believe in fostering a supportive environment where you can grow and succeed. We offer you the opportunity to advance your career and become an industry expert while working with a team that values both individual and collective success. SavATree is an Equal Opportunity Employer and a Drug-Free Workplace .
06/19/2026
Full time
Crew Lead Tree Climber What We Offer At SavATree, your success is our priority. Here's how we invest in you: Compensation : Competitive pay based on experience, skill level, and responsibilities. Benefits : Health and dental insurance, paid time off, 401(k) Savings Plan, Flexible Spending Plan, and an Equipment Account. Time Off: Time-off to support your work/life balance Training & Development : Extensive training opportunities, including leadership development and continuing education support in the industry. Tools for Success : Access to industry-leading equipment, climbing gear, and safety-focused crews. Team Environment : Our Tree Care Team works alongside some of the best trained and equipped teams in the industry, with an emphasis on quality and safety. About SavATree SavATree was founded 45 years ago with a mission to preserve trees and protect the natural landscapes we all enjoy. Since then, we've grown into a nationwide leader in tree, shrub, and lawn care services. We're a values-driven organization built on teamwork, integrity, respect, and a shared commitment to the environment. We pride ourselves on offering a collaborative and supportive work culture where your expertise is valued, and your career path is clear. As we like to say: When you work here, you thrive here. About the Role As a Tree Climber with SavATree, you'll be a key member of our General Tree Care Team . This team works on a variety of tree care tasks, including pruning, removals, and cabling. You'll apply your expertise in climbing, pruning, and safety to ensure the health and beauty of our clients' landscapes. The Crew Lead position offers additional responsibilities for those who demonstrate leadership qualities and want to guide a team. In this role, you will: Perform high-quality tree care services, including pruning, removals, and cabling for trees and shrubs Climb trees safely using proper techniques, ropes, saddle, and ladders Operate chainsaws, aerial lifts (bucket trucks), and other tree care equipment effectively Apply ANSI A300 Pruning Standards and ANSI Z safety practices in all tasks Ensure proper pruning cuts and techniques, preserving the health and structure of trees Assist in tree removals and utilize ropes, spikes, and other equipment as needed for safe takedowns Identify hazards and perform safety checks before, during, and after each job Perform aerial rescues if necessary, ensuring safety in high-risk situations Maintain strong communication with team members and clients, ensuring excellent service and safety at all times Take ownership of your role, contributing to a positive, safety-focused team culture What We're Looking For What is Essential: Valid U.S. driver's license (CDL is a plus) Authorization to work legally in the U.S. Passion for working outdoors and commitment to environmental stewardship Experience: Proficient in proper pruning techniques for large shade trees and ornamentals Strong knowledge of tree and shrub species, including their characteristics Comfortable climbing without spurs Skilled in adhering to tree care safety standards Experienced with chainsaws, aerial lifts (bucket trucks), and other essential tree care equipment Technical Knowledge: Expertise in proper pruning cuts, branch collars, and chainsaw operations (for trees up to 50 feet) Familiarity with ANSI A300 Pruning Standards and ANSI Z safety guidelines Ability to perform aerial rescues and apply various climbing techniques Comfortable working with a diverse range of tree species, including Oaks, Maples, Hemlocks, Pines, and more Physical Requirements: Must be able to lift and move up to 50 pounds frequently Ability to safely perform climbing and aerial work in varying conditions Experience with tree removal, including knowing when to use ropes or spikes for safe takedown This job requires physical stamina to meet the demands of climbing, lifting, and performing tasks outdoors. You'll frequently lift and move heavy equipment and must be comfortable working in a variety of weather conditions. Equal Opportunity At SavATree, we believe in fostering a supportive environment where you can grow and succeed. We offer you the opportunity to advance your career and become an industry expert while working with a team that values both individual and collective success. SavATree is an Equal Opportunity Employer and a Drug-Free Workplace .
