Job Description Job Description CORNERSTONE ENVIRONMENTAL SERVICES Title Site Work Crew Leader / Foreman - Venice (Heavy Equipment) Run equipment and ready to lead a crew of your own? Cornerstone Environmental Services is opening a new Venice location with a full pipeline of homebuilder site work already in place. You'll do the hands-on work and lead a crew of one to two people installing site protection and erosion control across the Sarasota-Venice-North Port corridor - with a company truck, a Ditch Witch SK900 mini skid steer/trencher, and steady year-round work backed by a monthly bonus. Who should apply Site/civil background or skilled skid-steer / equipment operator ready to step up to crew leader Can read site and grading plans and direct a crew on an active jobsite Holds a valid DL with a clean record (CDL a plus) Position Details Schedule: Full-time, consistent year-round work with strong overtime potential. Shifts typically begin at 7:00 AM and conclude around 4:00 PM , Monday through Friday. Some Saturday work may be required based on project and weather demands. Location: Based out of our new Venice-area yard, serving active homebuilder communities across the Sarasota-Venice-North Port corridor. A company work vehicle is provided for travel to and from job sites. Compensation: $20-$24 per hour , based on experience, with overtime paid after 40 hours and a monthly performance bonus available. Reports to: Location Field Manager. What You'll Do This is a hands-on, labor-heavy role. You'll be a working field technician first - in the dirt doing the physical work every day - while also leading a small crew of one to two people. You set the pace, work alongside them, own the quality, and keep the crew safe and productive. Your responsibilities will include, but are not limited to: Do the Work and Lead the Crew: Work alongside and direct a small crew of one to two people - doing the physical, labor-intensive work with them while assigning tasks, setting the daily pace, training new hires, and holding the team to Cornerstone's quality and safety standards. Erosion Control & BMP Installation: Install and maintain silt fence and stormwater best-management practices (BMPs) on active construction sites - post-setting, fabric attachment, inlet protection, and ongoing repair and maintenance to keep sites compliant. This is demanding, physical work done by hand and with equipment. Equipment Operation: Safely operate a Ditch Witch SK900 (or similar) mini skid steer/trencher and related machinery, and operate a company cab-over truck and trailer. Load, unload, and secure equipment, tools, and materials so the crew is ready to work each day. Quality & Compliance: Ensure all work meets Florida stormwater (NPDES) requirements. Walk sites, identify deficiencies, correct them, and keep every site inspection-ready. Site Coordination: Communicate professionally with site superintendents and the home office. Document completed work accurately and manage materials and inventory on the truck. Safety Leadership: Model and enforce all company safety standards and protocols, including PPE use and crew safety briefings. Your crew's safety is your responsibility. What We're Looking For Field Leadership: A proven ability to lead a small crew and consistently deliver quality work on time. You take ownership and others want to follow your lead. Relevant Background: Erosion control or silt fence experience is preferred - but landscape installation, site work, or civil/site contractor experience is equally welcome. If you've led crews doing physical site work, we want to talk. Equipment Skills: Comfortable and confident operating a Ditch Witch SK900 (or similar) mini skid steer/trencher and related equipment, and towing/operating a truck-and-trailer. A CDL is a strong plus. Valid Driver's License: Required, with a clean driving record. Bilingual (English/Spanish): A strong plus for leading and communicating with field crews. Built for Physical Work: Comfortable with demanding, labor-intensive work outdoors in Florida conditions every day - this is a get-your-hands-dirty role, not a supervise-from-the-truck one - with consistent attendance, punctuality, and sharp attention to detail. Why Cornerstone We're an established, growing company with a full book of work in the Venice corridor. The crew you lead will have steady, year-round work from the start - backed by a company that values its people and rewards strong performance: Steady, Year-Round Work: A full schedule waiting on day one - not seasonal, not feast-or-famine. Competitive Pay + Overtime: $20-$24 per hour, with overtime paid after 40 hours. Monthly Bonus: A performance bonus available every month. Paid Time Off (PTO): Earn well-deserved time to recharge. Paid Holidays: Celebrate key holidays with the people who matter most. Health Insurance: Comprehensive medical coverage for you and your family. 401(k) with Employer Match: We invest in your future by matching a portion of your contributions. Company Vehicle: Provided for travel to and from job sites. Ready to Lead? If you're a field leader who takes pride in doing things right and you want steady work with a company that's already busy, we want to hear from you. Join Cornerstone and lead our newest crew protecting Florida's job sites and communities. Apply today.
06/25/2026
Full time
Job Description Job Description CORNERSTONE ENVIRONMENTAL SERVICES Title Site Work Crew Leader / Foreman - Venice (Heavy Equipment) Run equipment and ready to lead a crew of your own? Cornerstone Environmental Services is opening a new Venice location with a full pipeline of homebuilder site work already in place. You'll do the hands-on work and lead a crew of one to two people installing site protection and erosion control across the Sarasota-Venice-North Port corridor - with a company truck, a Ditch Witch SK900 mini skid steer/trencher, and steady year-round work backed by a monthly bonus. Who should apply Site/civil background or skilled skid-steer / equipment operator ready to step up to crew leader Can read site and grading plans and direct a crew on an active jobsite Holds a valid DL with a clean record (CDL a plus) Position Details Schedule: Full-time, consistent year-round work with strong overtime potential. Shifts typically begin at 7:00 AM and conclude around 4:00 PM , Monday through Friday. Some Saturday work may be required based on project and weather demands. Location: Based out of our new Venice-area yard, serving active homebuilder communities across the Sarasota-Venice-North Port corridor. A company work vehicle is provided for travel to and from job sites. Compensation: $20-$24 per hour , based on experience, with overtime paid after 40 hours and a monthly performance bonus available. Reports to: Location Field Manager. What You'll Do This is a hands-on, labor-heavy role. You'll be a working field technician first - in the dirt doing the physical work every day - while also leading a small crew of one to two people. You set the pace, work alongside them, own the quality, and keep the crew safe and productive. Your responsibilities will include, but are not limited to: Do the Work and Lead the Crew: Work alongside and direct a small crew of one to two people - doing the physical, labor-intensive work with them while assigning tasks, setting the daily pace, training new hires, and holding the team to Cornerstone's quality and safety standards. Erosion Control & BMP Installation: Install and maintain silt fence and stormwater best-management practices (BMPs) on active construction sites - post-setting, fabric attachment, inlet protection, and ongoing repair and maintenance to keep sites compliant. This is demanding, physical work done by hand and with equipment. Equipment Operation: Safely operate a Ditch Witch SK900 (or similar) mini skid steer/trencher and related machinery, and operate a company cab-over truck and trailer. Load, unload, and secure equipment, tools, and materials so the crew is ready to work each day. Quality & Compliance: Ensure all work meets Florida stormwater (NPDES) requirements. Walk sites, identify deficiencies, correct them, and keep every site inspection-ready. Site Coordination: Communicate professionally with site superintendents and the home office. Document completed work accurately and manage materials and inventory on the truck. Safety Leadership: Model and enforce all company safety standards and protocols, including PPE use and crew safety briefings. Your crew's safety is your responsibility. What We're Looking For Field Leadership: A proven ability to lead a small crew and consistently deliver quality work on time. You take ownership and others want to follow your lead. Relevant Background: Erosion control or silt fence experience is preferred - but landscape installation, site work, or civil/site contractor experience is equally welcome. If you've led crews doing physical site work, we want to talk. Equipment Skills: Comfortable and confident operating a Ditch Witch SK900 (or similar) mini skid steer/trencher and related equipment, and towing/operating a truck-and-trailer. A CDL is a strong plus. Valid Driver's License: Required, with a clean driving record. Bilingual (English/Spanish): A strong plus for leading and communicating with field crews. Built for Physical Work: Comfortable with demanding, labor-intensive work outdoors in Florida conditions every day - this is a get-your-hands-dirty role, not a supervise-from-the-truck one - with consistent attendance, punctuality, and sharp attention to detail. Why Cornerstone We're an established, growing company with a full book of work in the Venice corridor. The crew you lead will have steady, year-round work from the start - backed by a company that values its people and rewards strong performance: Steady, Year-Round Work: A full schedule waiting on day one - not seasonal, not feast-or-famine. Competitive Pay + Overtime: $20-$24 per hour, with overtime paid after 40 hours. Monthly Bonus: A performance bonus available every month. Paid Time Off (PTO): Earn well-deserved time to recharge. Paid Holidays: Celebrate key holidays with the people who matter most. Health Insurance: Comprehensive medical coverage for you and your family. 401(k) with Employer Match: We invest in your future by matching a portion of your contributions. Company Vehicle: Provided for travel to and from job sites. Ready to Lead? If you're a field leader who takes pride in doing things right and you want steady work with a company that's already busy, we want to hear from you. Join Cornerstone and lead our newest crew protecting Florida's job sites and communities. Apply today.
Gulf Coast Intermodal is Now Hiring Diesel Technicians! Theodore, Alabama COMPETITIVE PAY $20 - $30/hour (based on experience) Health, dental, vision, and life Insurance 401(k) with match Paid time off and holidays Vacation days 40 hour work week - shifts vary On-the-job training and Volvo-acquired certificates Job Requirements Diesel engine repair: 1 year experience (preferred) Mechanical knowledge: 3 - 5 years experience (preferred) Possess basic mechanic tools Prior knowledge of the logistics/transportation industry Experience with brakes Experience with AC Experience with DOT inspections Proficient with computer programs, including TMT, Microsoft Office, Excel, and Outlook Knowledge of Qualcomm, Peoplenet ASE Automotive Excellence is preferred but not required Class A CDL preferred but not required What You'll Be Working On: New Volvo tractors Late-model utility trailers About Gulf Coast Intermodal Inc. Gulf Coast Intermodal's success is a result of one main ingredient, our service to our customers. Providing intermodal service between the Port of Mobile and the southeastern United States, GCI is considered a premier intermodal transportation provider. Our customers have learned they can count on us for flawless service, seven days a week. Along with an experienced staff, Gulf Coast operates late-model equipment equipped with satellite tracking. Customers can receive hourly updates on their loads 24 hours a day. Call Us Today
06/25/2026
Full time
Gulf Coast Intermodal is Now Hiring Diesel Technicians! Theodore, Alabama COMPETITIVE PAY $20 - $30/hour (based on experience) Health, dental, vision, and life Insurance 401(k) with match Paid time off and holidays Vacation days 40 hour work week - shifts vary On-the-job training and Volvo-acquired certificates Job Requirements Diesel engine repair: 1 year experience (preferred) Mechanical knowledge: 3 - 5 years experience (preferred) Possess basic mechanic tools Prior knowledge of the logistics/transportation industry Experience with brakes Experience with AC Experience with DOT inspections Proficient with computer programs, including TMT, Microsoft Office, Excel, and Outlook Knowledge of Qualcomm, Peoplenet ASE Automotive Excellence is preferred but not required Class A CDL preferred but not required What You'll Be Working On: New Volvo tractors Late-model utility trailers About Gulf Coast Intermodal Inc. Gulf Coast Intermodal's success is a result of one main ingredient, our service to our customers. Providing intermodal service between the Port of Mobile and the southeastern United States, GCI is considered a premier intermodal transportation provider. Our customers have learned they can count on us for flawless service, seven days a week. Along with an experienced staff, Gulf Coast operates late-model equipment equipped with satellite tracking. Customers can receive hourly updates on their loads 24 hours a day. Call Us Today
North American Central School Bus
Milwaukee, Wisconsin
Job Description Job Description Manages day-to-day operations of the maintenance shop, including, repairs, PMs, and overhauls of school buses and other company vehicles. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. Directs the work of others. Trains and motivates maintenance staff. Works without direct supervision with latitude for independent judgment. Major Responsibilities: 1) Manages day-to-day shop staff and operation. 2) Schedules and administers fleet maintenance, assists in troubleshooting problems with equipment. Reviews repair orders. 3) Delegates responsibilities as appropriate and monitors performance; takes corrective action as deemed necessary. 4) Ensures compliance on a day-to-day basis with State, Federal and Company requirements 5) Works closely with Contract Manager and Regional Operations Manager providing status of maintenance and budget requirements. May review financial and budget variances, review orders, estimate repairs, and approve related documents. 6) Order fuel for all vehicles, order parts, and subcontract repair work, including building maintains and grounds keeping. 7) Ensures technicians are trained properly and equipped so work is performed safely, on time, and cost effectively. 8) Manages special projects as assigned. 9) Communicates availability of vehicles for service with dispatch and Contract Manager. 10) Handles disciplinary concerns and employee development with shop personnel including training and development, planning work, and addressing performance Requirements & Expectations: Minimum of 5 years of experience in the transportation industry, including repairing and maintaining diesel engines and school bus equipment 5+ years of related mechanical experience or trade school with endorsements such as Preventative Maintenance or Brake Certifications 3+ years of hands-on mechanical managerial experience preferred Good written verbal communication skills. The ability to work early morning hours. Must maintain a professional and respectful attitude toward fellow employees and customers. Dress in a professional and appropriate manner for a business environment. Perform all job functions in the safest manner adhering to OSHA guidelines other applicable Federal & State laws Execute all job duties while following company policy and procedure Must possess or be able to acquire CDL Operator's license (Class B) with P endorsement within 60 days of hire Minimum Education & Certifications Required: High school diploma or equivalent Technical training preferred ASE certified strongly preferred Diesel certification strongly preferred Skills: Proficient computer skills including Microsoft Office, Manager Ability to use or learn to use internet, additional programs as required and office equipment, including fax and phones or other electronic devices Physical Requirements & Working Conditions (include amount of travel): Ability to successfully complete dexterity test and DOT physical and comply with drug free workplace policy Maintenance shop/garage/school bus yard /Office/On-the-road. Some outdoor work. Must be able to work in a crouched position or on back lying on mechanic's dolly beneath motor vehicle equipment Subjected to dust, dirt, and greasy conditions. Some local travel, typically within 50 miles from base. Physical requirements include: Pushing/Pulling Opening service door, emergency door, bus hood, steering, windows, applying service & parking brake, adjusting mirrors wheelchairs, student evacuations up to 120 lbs and for up to 40 feet. Lifting Bus hood, trash box, challenged passenger into their seats, wheel chocks, tire chains, emergency equipment. Up to 40 lbs. Walking Crossing lot, up and down bus aisle, around exterior of bus Sitting Up to 2-3 hours Climbing Steps in and out of bus, cleaning windshield, under hood inspection Reaching Under hood inspection, cleaning windows, applying tie-downs, safety vests, car seats, adjust mirrors, opening emergency door from ground, checking roof hatch, applying service brake, clutch and accelerator Gripping Doors, knobs, switches, handles, hand tools, etc. Hearing Detecting problems with passengers on bus, emergency vehicles, unusual engine noises Bending/Stooping/ Pre-trip inspection, applying tie-downs, sweeping, checking for sleeping Squatting children multiple times per route per day Seeing Driving, reading street signs, route sheets Communicating Via the English language with passengers, parents, school officials, dispatch, monitor if applicable Dropping From emergency door to ground
06/25/2026
Full time
Job Description Job Description Manages day-to-day operations of the maintenance shop, including, repairs, PMs, and overhauls of school buses and other company vehicles. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. Directs the work of others. Trains and motivates maintenance staff. Works without direct supervision with latitude for independent judgment. Major Responsibilities: 1) Manages day-to-day shop staff and operation. 2) Schedules and administers fleet maintenance, assists in troubleshooting problems with equipment. Reviews repair orders. 3) Delegates responsibilities as appropriate and monitors performance; takes corrective action as deemed necessary. 4) Ensures compliance on a day-to-day basis with State, Federal and Company requirements 5) Works closely with Contract Manager and Regional Operations Manager providing status of maintenance and budget requirements. May review financial and budget variances, review orders, estimate repairs, and approve related documents. 6) Order fuel for all vehicles, order parts, and subcontract repair work, including building maintains and grounds keeping. 7) Ensures technicians are trained properly and equipped so work is performed safely, on time, and cost effectively. 8) Manages special projects as assigned. 9) Communicates availability of vehicles for service with dispatch and Contract Manager. 10) Handles disciplinary concerns and employee development with shop personnel including training and development, planning work, and addressing performance Requirements & Expectations: Minimum of 5 years of experience in the transportation industry, including repairing and maintaining diesel engines and school bus equipment 5+ years of related mechanical experience or trade school with endorsements such as Preventative Maintenance or Brake Certifications 3+ years of hands-on mechanical managerial experience preferred Good written verbal communication skills. The ability to work early morning hours. Must maintain a professional and respectful attitude toward fellow employees and customers. Dress in a professional and appropriate manner for a business environment. Perform all job functions in the safest manner adhering to OSHA guidelines other applicable Federal & State laws Execute all job duties while following company policy and procedure Must possess or be able to acquire CDL Operator's license (Class B) with P endorsement within 60 days of hire Minimum Education & Certifications Required: High school diploma or equivalent Technical training preferred ASE certified strongly preferred Diesel certification strongly preferred Skills: Proficient computer skills including Microsoft Office, Manager Ability to use or learn to use internet, additional programs as required and office equipment, including fax and phones or other electronic devices Physical Requirements & Working Conditions (include amount of travel): Ability to successfully complete dexterity test and DOT physical and comply with drug free workplace policy Maintenance shop/garage/school bus yard /Office/On-the-road. Some outdoor work. Must be able to work in a crouched position or on back lying on mechanic's dolly beneath motor vehicle equipment Subjected to dust, dirt, and greasy conditions. Some local travel, typically within 50 miles from base. Physical requirements include: Pushing/Pulling Opening service door, emergency door, bus hood, steering, windows, applying service & parking brake, adjusting mirrors wheelchairs, student evacuations up to 120 lbs and for up to 40 feet. Lifting Bus hood, trash box, challenged passenger into their seats, wheel chocks, tire chains, emergency equipment. Up to 40 lbs. Walking Crossing lot, up and down bus aisle, around exterior of bus Sitting Up to 2-3 hours Climbing Steps in and out of bus, cleaning windshield, under hood inspection Reaching Under hood inspection, cleaning windows, applying tie-downs, safety vests, car seats, adjust mirrors, opening emergency door from ground, checking roof hatch, applying service brake, clutch and accelerator Gripping Doors, knobs, switches, handles, hand tools, etc. Hearing Detecting problems with passengers on bus, emergency vehicles, unusual engine noises Bending/Stooping/ Pre-trip inspection, applying tie-downs, sweeping, checking for sleeping Squatting children multiple times per route per day Seeing Driving, reading street signs, route sheets Communicating Via the English language with passengers, parents, school officials, dispatch, monitor if applicable Dropping From emergency door to ground
Gulf Coast Intermodal is Now Hiring Diesel Technicians! Theodore, Alabama COMPETITIVE PAY $20 - $30/hour (based on experience) Health, dental, vision, and life Insurance 401(k) with match Paid time off and holidays Vacation days 40 hour work week - shifts vary On-the-job training and Volvo-acquired certificates Job Requirements Diesel engine repair: 1 year experience (preferred) Mechanical knowledge: 3 - 5 years experience (preferred) Possess basic mechanic tools Prior knowledge of the logistics/transportation industry Experience with brakes Experience with AC Experience with DOT inspections Proficient with computer programs, including TMT, Microsoft Office, Excel, and Outlook Knowledge of Qualcomm, Peoplenet ASE Automotive Excellence is preferred but not required Class A CDL preferred but not required What You'll Be Working On: New Volvo tractors Late-model utility trailers About Gulf Coast Intermodal Inc. Gulf Coast Intermodal's success is a result of one main ingredient, our service to our customers. Providing intermodal service between the Port of Mobile and the southeastern United States, GCI is considered a premier intermodal transportation provider. Our customers have learned they can count on us for flawless service, seven days a week. Along with an experienced staff, Gulf Coast operates late-model equipment equipped with satellite tracking. Customers can receive hourly updates on their loads 24 hours a day. Call Us Today
06/25/2026
Full time
Gulf Coast Intermodal is Now Hiring Diesel Technicians! Theodore, Alabama COMPETITIVE PAY $20 - $30/hour (based on experience) Health, dental, vision, and life Insurance 401(k) with match Paid time off and holidays Vacation days 40 hour work week - shifts vary On-the-job training and Volvo-acquired certificates Job Requirements Diesel engine repair: 1 year experience (preferred) Mechanical knowledge: 3 - 5 years experience (preferred) Possess basic mechanic tools Prior knowledge of the logistics/transportation industry Experience with brakes Experience with AC Experience with DOT inspections Proficient with computer programs, including TMT, Microsoft Office, Excel, and Outlook Knowledge of Qualcomm, Peoplenet ASE Automotive Excellence is preferred but not required Class A CDL preferred but not required What You'll Be Working On: New Volvo tractors Late-model utility trailers About Gulf Coast Intermodal Inc. Gulf Coast Intermodal's success is a result of one main ingredient, our service to our customers. Providing intermodal service between the Port of Mobile and the southeastern United States, GCI is considered a premier intermodal transportation provider. Our customers have learned they can count on us for flawless service, seven days a week. Along with an experienced staff, Gulf Coast operates late-model equipment equipped with satellite tracking. Customers can receive hourly updates on their loads 24 hours a day. Call Us Today
Gulf Coast Intermodal is Now Hiring Diesel Technicians! Theodore, Alabama COMPETITIVE PAY $20 - $30/hour (based on experience) Health, dental, vision, and life Insurance 401(k) with match Paid time off and holidays Vacation days 40 hour work week - shifts vary On-the-job training and Volvo-acquired certificates Job Requirements Diesel engine repair: 1 year experience (preferred) Mechanical knowledge: 3 - 5 years experience (preferred) Possess basic mechanic tools Prior knowledge of the logistics/transportation industry Experience with brakes Experience with AC Experience with DOT inspections Proficient with computer programs, including TMT, Microsoft Office, Excel, and Outlook Knowledge of Qualcomm, Peoplenet ASE Automotive Excellence is preferred but not required Class A CDL preferred but not required What You'll Be Working On: New Volvo tractors Late-model utility trailers About Gulf Coast Intermodal Inc. Gulf Coast Intermodal's success is a result of one main ingredient, our service to our customers. Providing intermodal service between the Port of Mobile and the southeastern United States, GCI is considered a premier intermodal transportation provider. Our customers have learned they can count on us for flawless service, seven days a week. Along with an experienced staff, Gulf Coast operates late-model equipment equipped with satellite tracking. Customers can receive hourly updates on their loads 24 hours a day. Call Us Today
06/25/2026
Full time
Gulf Coast Intermodal is Now Hiring Diesel Technicians! Theodore, Alabama COMPETITIVE PAY $20 - $30/hour (based on experience) Health, dental, vision, and life Insurance 401(k) with match Paid time off and holidays Vacation days 40 hour work week - shifts vary On-the-job training and Volvo-acquired certificates Job Requirements Diesel engine repair: 1 year experience (preferred) Mechanical knowledge: 3 - 5 years experience (preferred) Possess basic mechanic tools Prior knowledge of the logistics/transportation industry Experience with brakes Experience with AC Experience with DOT inspections Proficient with computer programs, including TMT, Microsoft Office, Excel, and Outlook Knowledge of Qualcomm, Peoplenet ASE Automotive Excellence is preferred but not required Class A CDL preferred but not required What You'll Be Working On: New Volvo tractors Late-model utility trailers About Gulf Coast Intermodal Inc. Gulf Coast Intermodal's success is a result of one main ingredient, our service to our customers. Providing intermodal service between the Port of Mobile and the southeastern United States, GCI is considered a premier intermodal transportation provider. Our customers have learned they can count on us for flawless service, seven days a week. Along with an experienced staff, Gulf Coast operates late-model equipment equipped with satellite tracking. Customers can receive hourly updates on their loads 24 hours a day. Call Us Today
HPC Industrial powered by Clean Harbors
Graysville, Indiana
HPC Industrial, powered by Clean Harbors in Robinson, IL is looking for a Class A or B CDL Driver / Equipment Operator to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew and completes turnarounds with management oversight at client's site in accordance with client and business requirements and company policies, practices, and procedures. Tanker endorsement required. Must be licesned to drive manual transmission trucks. TWIC card required or must be able to obtain. Transitioning Military , this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our priority and we live it 3-6-5! Competitive wages $23.00 hourly Positive and safe work environments Opportunities for growth and development for all the stages of your career RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Hands-on operation vacuum equipment and hydroblasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer specifications. Perform routine maintenance on company equipment being used on the job. Perform any and all duties associated with liquid vacs, air machines and jet rodders. May direct a crew of vacuum technicians. May transport equipment and personnel to and from customer locations. Complete pre and post trip inspections, driver's logs and comply with all other vehicle policies and DOT requirements. Loading and unloading hoses. Unload vacuum truck at the dump site. Provide general maintenance in the field. Perform other related duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver's license, CDL Class A or B and other requirements of company's driving policy required when driving company vehicle or using personal vehicle on company business. Federal Transportation Workers Identification Credential (TWIC) required. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. Experience operating a vacuum truck. Working knowledge of operating equipment used in wet and dry vacuums. QUALIFICATIONS What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience. Class A or B CDL License required. No restrictions must be licensed to drive manual transmission. Manual transmission experience. HAZMAT and Tanker Endorsements required. Federal Transportation Workers Identification Credential (TWIC) required or must be able to obtain. About HPC-Industrial HPC-Industrial , a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. HPC
06/24/2026
Full time
HPC Industrial, powered by Clean Harbors in Robinson, IL is looking for a Class A or B CDL Driver / Equipment Operator to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew and completes turnarounds with management oversight at client's site in accordance with client and business requirements and company policies, practices, and procedures. Tanker endorsement required. Must be licesned to drive manual transmission trucks. TWIC card required or must be able to obtain. Transitioning Military , this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our priority and we live it 3-6-5! Competitive wages $23.00 hourly Positive and safe work environments Opportunities for growth and development for all the stages of your career RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Hands-on operation vacuum equipment and hydroblasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer specifications. Perform routine maintenance on company equipment being used on the job. Perform any and all duties associated with liquid vacs, air machines and jet rodders. May direct a crew of vacuum technicians. May transport equipment and personnel to and from customer locations. Complete pre and post trip inspections, driver's logs and comply with all other vehicle policies and DOT requirements. Loading and unloading hoses. Unload vacuum truck at the dump site. Provide general maintenance in the field. Perform other related duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver's license, CDL Class A or B and other requirements of company's driving policy required when driving company vehicle or using personal vehicle on company business. Federal Transportation Workers Identification Credential (TWIC) required. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. Experience operating a vacuum truck. Working knowledge of operating equipment used in wet and dry vacuums. QUALIFICATIONS What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience. Class A or B CDL License required. No restrictions must be licensed to drive manual transmission. Manual transmission experience. HAZMAT and Tanker Endorsements required. Federal Transportation Workers Identification Credential (TWIC) required or must be able to obtain. About HPC-Industrial HPC-Industrial , a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. HPC
HPC Industrial powered by Clean Harbors
Sullivan, Indiana
HPC Industrial, powered by Clean Harbors in Robinson, IL is looking for a Class A or B CDL Driver / Equipment Operator to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew and completes turnarounds with management oversight at client's site in accordance with client and business requirements and company policies, practices, and procedures. Tanker endorsement required. Must be licesned to drive manual transmission trucks. TWIC card required or must be able to obtain. Transitioning Military , this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our priority and we live it 3-6-5! Competitive wages $23.00 hourly Positive and safe work environments Opportunities for growth and development for all the stages of your career RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Hands-on operation vacuum equipment and hydroblasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer specifications. Perform routine maintenance on company equipment being used on the job. Perform any and all duties associated with liquid vacs, air machines and jet rodders. May direct a crew of vacuum technicians. May transport equipment and personnel to and from customer locations. Complete pre and post trip inspections, driver's logs and comply with all other vehicle policies and DOT requirements. Loading and unloading hoses. Unload vacuum truck at the dump site. Provide general maintenance in the field. Perform other related duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver's license, CDL Class A or B and other requirements of company's driving policy required when driving company vehicle or using personal vehicle on company business. Federal Transportation Workers Identification Credential (TWIC) required. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. Experience operating a vacuum truck. Working knowledge of operating equipment used in wet and dry vacuums. QUALIFICATIONS What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience. Class A or B CDL License required. No restrictions must be licensed to drive manual transmission. Manual transmission experience. HAZMAT and Tanker Endorsements required. Federal Transportation Workers Identification Credential (TWIC) required or must be able to obtain. About HPC-Industrial HPC-Industrial , a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. HPC
06/24/2026
Full time
HPC Industrial, powered by Clean Harbors in Robinson, IL is looking for a Class A or B CDL Driver / Equipment Operator to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew and completes turnarounds with management oversight at client's site in accordance with client and business requirements and company policies, practices, and procedures. Tanker endorsement required. Must be licesned to drive manual transmission trucks. TWIC card required or must be able to obtain. Transitioning Military , this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our priority and we live it 3-6-5! Competitive wages $23.00 hourly Positive and safe work environments Opportunities for growth and development for all the stages of your career RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Hands-on operation vacuum equipment and hydroblasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer specifications. Perform routine maintenance on company equipment being used on the job. Perform any and all duties associated with liquid vacs, air machines and jet rodders. May direct a crew of vacuum technicians. May transport equipment and personnel to and from customer locations. Complete pre and post trip inspections, driver's logs and comply with all other vehicle policies and DOT requirements. Loading and unloading hoses. Unload vacuum truck at the dump site. Provide general maintenance in the field. Perform other related duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver's license, CDL Class A or B and other requirements of company's driving policy required when driving company vehicle or using personal vehicle on company business. Federal Transportation Workers Identification Credential (TWIC) required. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. Experience operating a vacuum truck. Working knowledge of operating equipment used in wet and dry vacuums. QUALIFICATIONS What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience. Class A or B CDL License required. No restrictions must be licensed to drive manual transmission. Manual transmission experience. HAZMAT and Tanker Endorsements required. Federal Transportation Workers Identification Credential (TWIC) required or must be able to obtain. About HPC-Industrial HPC-Industrial , a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. HPC
HPC Industrial powered by Clean Harbors
Fairbanks, Indiana
HPC Industrial, powered by Clean Harbors in Robinson, IL is looking for a Class A or B CDL Driver / Equipment Operator to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew and completes turnarounds with management oversight at client's site in accordance with client and business requirements and company policies, practices, and procedures. Tanker endorsement required. Must be licesned to drive manual transmission trucks. TWIC card required or must be able to obtain. Transitioning Military , this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our priority and we live it 3-6-5! Competitive wages $23.00 hourly Positive and safe work environments Opportunities for growth and development for all the stages of your career RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Hands-on operation vacuum equipment and hydroblasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer specifications. Perform routine maintenance on company equipment being used on the job. Perform any and all duties associated with liquid vacs, air machines and jet rodders. May direct a crew of vacuum technicians. May transport equipment and personnel to and from customer locations. Complete pre and post trip inspections, driver's logs and comply with all other vehicle policies and DOT requirements. Loading and unloading hoses. Unload vacuum truck at the dump site. Provide general maintenance in the field. Perform other related duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver's license, CDL Class A or B and other requirements of company's driving policy required when driving company vehicle or using personal vehicle on company business. Federal Transportation Workers Identification Credential (TWIC) required. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. Experience operating a vacuum truck. Working knowledge of operating equipment used in wet and dry vacuums. QUALIFICATIONS What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience. Class A or B CDL License required. No restrictions must be licensed to drive manual transmission. Manual transmission experience. HAZMAT and Tanker Endorsements required. Federal Transportation Workers Identification Credential (TWIC) required or must be able to obtain. About HPC-Industrial HPC-Industrial , a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. HPC
06/24/2026
Full time
HPC Industrial, powered by Clean Harbors in Robinson, IL is looking for a Class A or B CDL Driver / Equipment Operator to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew and completes turnarounds with management oversight at client's site in accordance with client and business requirements and company policies, practices, and procedures. Tanker endorsement required. Must be licesned to drive manual transmission trucks. TWIC card required or must be able to obtain. Transitioning Military , this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our priority and we live it 3-6-5! Competitive wages $23.00 hourly Positive and safe work environments Opportunities for growth and development for all the stages of your career RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Hands-on operation vacuum equipment and hydroblasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer specifications. Perform routine maintenance on company equipment being used on the job. Perform any and all duties associated with liquid vacs, air machines and jet rodders. May direct a crew of vacuum technicians. May transport equipment and personnel to and from customer locations. Complete pre and post trip inspections, driver's logs and comply with all other vehicle policies and DOT requirements. Loading and unloading hoses. Unload vacuum truck at the dump site. Provide general maintenance in the field. Perform other related duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver's license, CDL Class A or B and other requirements of company's driving policy required when driving company vehicle or using personal vehicle on company business. Federal Transportation Workers Identification Credential (TWIC) required. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. Experience operating a vacuum truck. Working knowledge of operating equipment used in wet and dry vacuums. QUALIFICATIONS What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience. Class A or B CDL License required. No restrictions must be licensed to drive manual transmission. Manual transmission experience. HAZMAT and Tanker Endorsements required. Federal Transportation Workers Identification Credential (TWIC) required or must be able to obtain. About HPC-Industrial HPC-Industrial , a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. HPC
Location: Brownsburg, IN. Pay Range: $28-$38/hr. (based on experience) Monday - Friday, 1st Shift (Flexible) 40hrs/wk. (ability to work overtime, when needed) Full Benefits, Profit Sharing & 401K Tired of the same boring job? Apply now and join our growing team! Contract Lumber strives to build strategic alliances with our builder customers in an effort to maximize their efficiency and profitability. We conduct our business in an ethical manner always concentrating on providing exceptional customer service and quality building materials at competitive prices. We are dedicated to identifying and solving customer problems through communication, market awareness and innovative thinking. The Fleet Technician is responsible for maintenance and repair of all company vehicles and equipment. The Fleet Technician works under the general direction of the Fleet Manager. Day to Day Scheduled maintenance to all company vehicles, commercial trailers, yard lifts and truck mounted forklifts. Unscheduled repairs. Perform preventative maintenance inspection on equipment noting any defects and making repairs. 25% travel may be required All other duties as assigned. Skill Set Ability to anticipate, analyze and proactively solve problems Ability to read and interpret documents such as safety rules, operation and maintenance instructions and procedures Ability to read/write and comprehend instructions, short correspondence, and memos Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Ability to use relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards. Detail oriented, timeliness and an efficiency-based approach. Build positive relationships with both vendors and our team. Ability to appropriately prioritize tasks to meet varied and conflicting organization demands. Working knowledge of materials and job-site processes used within the construction industry. Must possess knowledge with electrical components, hydraulic systems, gas, LP, and diesel engines. Must be proficient with computers and diagnostic equipment. Ability to weld, torch, and use plasma cutter. Good organizational skills; detailed and accurate Leadership, interpersonal and verbal/written communication skills Willingness to take on responsibilities, challenges and additional duties as required CDL recommended, but not necessary Position may require pushing, lifting, carrying and moving material more than 100 lbs. Requires standing for long periods of time as well as extensive mobility. Position requires the ability to mount and dismount and operate a forklift/truck on a regular basis. We offer our full-time staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, 401k retirement plans with matching, and generous paid time off. We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Powered by JazzHR PI8cba2baebdb5-1282
06/24/2026
Full time
Location: Brownsburg, IN. Pay Range: $28-$38/hr. (based on experience) Monday - Friday, 1st Shift (Flexible) 40hrs/wk. (ability to work overtime, when needed) Full Benefits, Profit Sharing & 401K Tired of the same boring job? Apply now and join our growing team! Contract Lumber strives to build strategic alliances with our builder customers in an effort to maximize their efficiency and profitability. We conduct our business in an ethical manner always concentrating on providing exceptional customer service and quality building materials at competitive prices. We are dedicated to identifying and solving customer problems through communication, market awareness and innovative thinking. The Fleet Technician is responsible for maintenance and repair of all company vehicles and equipment. The Fleet Technician works under the general direction of the Fleet Manager. Day to Day Scheduled maintenance to all company vehicles, commercial trailers, yard lifts and truck mounted forklifts. Unscheduled repairs. Perform preventative maintenance inspection on equipment noting any defects and making repairs. 25% travel may be required All other duties as assigned. Skill Set Ability to anticipate, analyze and proactively solve problems Ability to read and interpret documents such as safety rules, operation and maintenance instructions and procedures Ability to read/write and comprehend instructions, short correspondence, and memos Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Ability to use relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards. Detail oriented, timeliness and an efficiency-based approach. Build positive relationships with both vendors and our team. Ability to appropriately prioritize tasks to meet varied and conflicting organization demands. Working knowledge of materials and job-site processes used within the construction industry. Must possess knowledge with electrical components, hydraulic systems, gas, LP, and diesel engines. Must be proficient with computers and diagnostic equipment. Ability to weld, torch, and use plasma cutter. Good organizational skills; detailed and accurate Leadership, interpersonal and verbal/written communication skills Willingness to take on responsibilities, challenges and additional duties as required CDL recommended, but not necessary Position may require pushing, lifting, carrying and moving material more than 100 lbs. Requires standing for long periods of time as well as extensive mobility. Position requires the ability to mount and dismount and operate a forklift/truck on a regular basis. We offer our full-time staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, 401k retirement plans with matching, and generous paid time off. We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Powered by JazzHR PI8cba2baebdb5-1282
Job Description Job Description JET Electrical Testing, LLC is seeking experienced electrical test technicians for the positions of Electrical Field Service Test Technician and Senior Electrical Field Service Test Technician . We are a growing IBEW (Union), electrical testing company located near Trenton in Hamilton, New Jersey. Most of our work is located in New Jersey, with some work in New York, Connecticut, Delaware and Pennsylvania. We feature good pay (including significant overtime), benefits (paid through the local union hall), training and a clear path for ascension. Overnight travel is rare. Requirements: Possess a high level of technical expertise as applied to electric transmission and distribution equipment facilities. Must be fully knowledgeable with the National Electrical Code, National Electric Safety Code, Fall Protection, LOTO, OSHA Regulation, Confined Spaces, ARC Flash, Shock Hazards, Safe Work Practices and are experienced working in energized high voltage facilities. A graduate Electrical Engineer or trained technician with at least ten (10) years of relevant experience. Able to read, modify and interpret all types of electrical drawing, schematics, wiring diagrams and logic diagrams. Familiar with all types of test equipment including, but not limited to, circuit breaker timing apparatus, high potential AC and DC test equipment, high current/low impedance ohmmeters, digital multi-meters, relay test apparatus, power quality metering. Possess good computer skills, including MS-Word, MS-Excel, Windows and be willing to learn new software packages as they appear. AutoCAD a plus but not expected. Will be required to perform the work in an IBEW union environment. Must have a valid and clean driver's license. Must have good work ethic. Good communication and interpersonal skills. Must have a clean record and be able to obtain a CDL, TWIC and/or similar document needed. Must pass Pre-hire Drug Screen and background check. Duties & Responsibilities (not limited to): Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Closing and opening of circuit breakers from local control switch. Closing and opening of circuit breakers from a SCADA system. Tripping of circuit breakers from a protective relay system. Operational verification for all internal circuit breaker controls and alarms. Verification of all AC and DC relay wiring. Verification of current transformer (CT) wiring ratio and polarity from the CT to the relays. Settings applied to all programmable relays and instruments (calculation of setting are by the System Protection Engineers). Simulation and verification of all potential device wiring CCVT's and PT's from the potential service to the relay or instrument connected to such devices. Verification of all systems associated with power transformers (load tap changers (LTC's), fans, pumps, alarms, sudden pressure relays, controls). Operational verification of electrical or mechanical safety interlock systems. Verification of SCADA inputs and outputs. Operational verification of auxiliary power systems including, generators, bus transfer and other equipment. Operational verification of relay protective schemes including, breaker failure, transfer trip (Tone and Fiber), bus differential, transformer differential, line protection schemes. Mark up of project drawings to reflect as built/modified conditions includes as required: cable diagrams, schematics, wiring diagrams, relay rack arrangements and physical layout drawings; actual CAD updates will be performed by others from marked prints. Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Generate technical reports detailing services provided, problems found, and corrective action taken or recommended. Electronic relay setting review and modification (SEL, Multilin, Siprotec, etc.) Circuit tracing and verification. Additional activities on an as required basis such as but not limited to: Electrical tests (Hi-pot, Doble, TTR, Ductor, Megger) Battery voltage regulator set-up. Battery electrolyte quality. Aux power transformer tap set-up. Operational verification of both manual and motor operated disconnects. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair.
06/24/2026
Full time
Job Description Job Description JET Electrical Testing, LLC is seeking experienced electrical test technicians for the positions of Electrical Field Service Test Technician and Senior Electrical Field Service Test Technician . We are a growing IBEW (Union), electrical testing company located near Trenton in Hamilton, New Jersey. Most of our work is located in New Jersey, with some work in New York, Connecticut, Delaware and Pennsylvania. We feature good pay (including significant overtime), benefits (paid through the local union hall), training and a clear path for ascension. Overnight travel is rare. Requirements: Possess a high level of technical expertise as applied to electric transmission and distribution equipment facilities. Must be fully knowledgeable with the National Electrical Code, National Electric Safety Code, Fall Protection, LOTO, OSHA Regulation, Confined Spaces, ARC Flash, Shock Hazards, Safe Work Practices and are experienced working in energized high voltage facilities. A graduate Electrical Engineer or trained technician with at least ten (10) years of relevant experience. Able to read, modify and interpret all types of electrical drawing, schematics, wiring diagrams and logic diagrams. Familiar with all types of test equipment including, but not limited to, circuit breaker timing apparatus, high potential AC and DC test equipment, high current/low impedance ohmmeters, digital multi-meters, relay test apparatus, power quality metering. Possess good computer skills, including MS-Word, MS-Excel, Windows and be willing to learn new software packages as they appear. AutoCAD a plus but not expected. Will be required to perform the work in an IBEW union environment. Must have a valid and clean driver's license. Must have good work ethic. Good communication and interpersonal skills. Must have a clean record and be able to obtain a CDL, TWIC and/or similar document needed. Must pass Pre-hire Drug Screen and background check. Duties & Responsibilities (not limited to): Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Closing and opening of circuit breakers from local control switch. Closing and opening of circuit breakers from a SCADA system. Tripping of circuit breakers from a protective relay system. Operational verification for all internal circuit breaker controls and alarms. Verification of all AC and DC relay wiring. Verification of current transformer (CT) wiring ratio and polarity from the CT to the relays. Settings applied to all programmable relays and instruments (calculation of setting are by the System Protection Engineers). Simulation and verification of all potential device wiring CCVT's and PT's from the potential service to the relay or instrument connected to such devices. Verification of all systems associated with power transformers (load tap changers (LTC's), fans, pumps, alarms, sudden pressure relays, controls). Operational verification of electrical or mechanical safety interlock systems. Verification of SCADA inputs and outputs. Operational verification of auxiliary power systems including, generators, bus transfer and other equipment. Operational verification of relay protective schemes including, breaker failure, transfer trip (Tone and Fiber), bus differential, transformer differential, line protection schemes. Mark up of project drawings to reflect as built/modified conditions includes as required: cable diagrams, schematics, wiring diagrams, relay rack arrangements and physical layout drawings; actual CAD updates will be performed by others from marked prints. Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Generate technical reports detailing services provided, problems found, and corrective action taken or recommended. Electronic relay setting review and modification (SEL, Multilin, Siprotec, etc.) Circuit tracing and verification. Additional activities on an as required basis such as but not limited to: Electrical tests (Hi-pot, Doble, TTR, Ductor, Megger) Battery voltage regulator set-up. Battery electrolyte quality. Aux power transformer tap set-up. Operational verification of both manual and motor operated disconnects. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair.
HPC Industrial powered by Clean Harbors
Merom, Indiana
HPC Industrial, powered by Clean Harbors in Robinson, IL is looking for a Class A or B CDL Driver / Equipment Operator to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew and completes turnarounds with management oversight at client's site in accordance with client and business requirements and company policies, practices, and procedures. Tanker endorsement required. Must be licesned to drive manual transmission trucks. TWIC card required or must be able to obtain. Transitioning Military , this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our priority and we live it 3-6-5! Competitive wages $23.00 hourly Positive and safe work environments Opportunities for growth and development for all the stages of your career RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Hands-on operation vacuum equipment and hydroblasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer specifications. Perform routine maintenance on company equipment being used on the job. Perform any and all duties associated with liquid vacs, air machines and jet rodders. May direct a crew of vacuum technicians. May transport equipment and personnel to and from customer locations. Complete pre and post trip inspections, driver's logs and comply with all other vehicle policies and DOT requirements. Loading and unloading hoses. Unload vacuum truck at the dump site. Provide general maintenance in the field. Perform other related duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver's license, CDL Class A or B and other requirements of company's driving policy required when driving company vehicle or using personal vehicle on company business. Federal Transportation Workers Identification Credential (TWIC) required. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. Experience operating a vacuum truck. Working knowledge of operating equipment used in wet and dry vacuums. QUALIFICATIONS What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience. Class A or B CDL License required. No restrictions must be licensed to drive manual transmission. Manual transmission experience. HAZMAT and Tanker Endorsements required. Federal Transportation Workers Identification Credential (TWIC) required or must be able to obtain. About HPC-Industrial HPC-Industrial , a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. HPC
06/24/2026
Full time
HPC Industrial, powered by Clean Harbors in Robinson, IL is looking for a Class A or B CDL Driver / Equipment Operator to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of HPC Industrial jobs across all services lines. Supervises and completes single task jobs requiring one crew and completes turnarounds with management oversight at client's site in accordance with client and business requirements and company policies, practices, and procedures. Tanker endorsement required. Must be licesned to drive manual transmission trucks. TWIC card required or must be able to obtain. Transitioning Military , this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our priority and we live it 3-6-5! Competitive wages $23.00 hourly Positive and safe work environments Opportunities for growth and development for all the stages of your career RESPONSIBILITIES Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Hands-on operation vacuum equipment and hydroblasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized hydroblasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer specifications. Perform routine maintenance on company equipment being used on the job. Perform any and all duties associated with liquid vacs, air machines and jet rodders. May direct a crew of vacuum technicians. May transport equipment and personnel to and from customer locations. Complete pre and post trip inspections, driver's logs and comply with all other vehicle policies and DOT requirements. Loading and unloading hoses. Unload vacuum truck at the dump site. Provide general maintenance in the field. Perform other related duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver's license, CDL Class A or B and other requirements of company's driving policy required when driving company vehicle or using personal vehicle on company business. Federal Transportation Workers Identification Credential (TWIC) required. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. Experience operating a vacuum truck. Working knowledge of operating equipment used in wet and dry vacuums. QUALIFICATIONS What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience. Class A or B CDL License required. No restrictions must be licensed to drive manual transmission. Manual transmission experience. HAZMAT and Tanker Endorsements required. Federal Transportation Workers Identification Credential (TWIC) required or must be able to obtain. About HPC-Industrial HPC-Industrial , a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at . Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Clean Harbors is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. HPC
️You're more than a repair person-you're a problem solver, a troubleshooter, and the person people count on when something needs to be done right. ️ We're looking for a Skilled Maintenance Technician who can tackle challenges with confidence, think on their feet, and help maintain high-quality properties with care and precision. ️ The Skilled Maintenance Technician is a valuable member of the operations team. The position is responsible for performing maintenance duties in managed luxury homes. Exceptional knowledge of home maintenance, repair and troubleshooting in the following areas is essential: • Plumbing • A/V Equipment • Appliances • Fireplaces • Boilers and HVAC • Electrical • Carpentry • Painting • Drywall repair DUTIES AND RESPONSIBILITIES: • Maintenance • Weekly Property Checks o Weekly Trash and Bi-weekly Recycling Removal o Landscaping o Irrigation Maintenance o Snow Removal o Create Estimates for Repairs o Scheduling and coordination of property maintenance • Post departure and Pre-Arrival Property Checks • Home inspection, evaluation and repair • Vehicle Preventive Maintenance and Repair • Documentation of time worked and tasks completed for billable and non-billable tim • Required On-Call response as directed by reservations • Performs other related duties as assigned. • Some evening on-call shifts SUPERVISORY RESPONSIBILITIES: • This job has no supervisor responsibilities DESIRED SKILLS AND EXPERIENCES: • Maintenance Technicians must have and maintain a clean driving record to drive company vehicles • Qualifications: High school diploma or general education degree (GED). • Work Experience: 4+ years or more property maintenance experience and/or training, or equivalent combination of education and experience. • General Knowledge: Property Management, Home Maintenance, Carpentry, Irrigation Systems, Plumbing, Electrical, AV, Hot Tubs/Spa, Appliances, Computer skills • Company Culture: All managers and supervisors assume a leadership role within the MM team as an ambassador and protector of our company culture. • Flexibility: Demonstrates a willingness to assist in any role within the organization in times of need. Flexible working hours and ability to regularly work on weekends. • Adaptability: Demonstrates a willingness and ability to change as new systems are implemented. • Certificates, licenses and registrations required: Must have a valid driver's license or CDL with a clean driving record and must maintain a clean driving record. Confidence in driving large vehicle including shuttles and towing trailers. • Communication: Must possess excellent customer service skills, communication, and interpersonal skills. • Diversity: Ability to work with a diverse team and clientele. • Attitude: Personable and able to deal with variety of personality types. Positive attitude to solving problems. • Multi-tasking: Ability with logistics and coordination of simultaneous assignments • Work Ethic: Deadline driven, detail oriented and able to work autonomously but also as a team player. • Teamwork: Ability to interact positively with supervisor, management, coworkers, owners and guests. PHYSICAL DEMANDS AND WORK ENVIORNMENT: • Frequently required to stand and walk, talk and hear • Frequently required to climb, balance, bend, stoop, kneel or crawl • Continually required to utilize hand and finger dexterity • Continual exposure to wet and/or humid conditions (non-weather) • Continually exposure to outside weather conditions • Continually exposure to extreme heat or cold (non-weather) • While performing the duties of this job, the noise level in the work environment is usually moderate to loud • The employee must regularly lift and/or move up to 20 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds • Specific vision abilities required by this job include: Close vision; Distance vision; Color vision; Peripheral vision; Depth perception and ability to adjust focus • Additional remarks regarding work environment: o Able to get in and out of a vehicle o Must be able to walk on icy & slippery surfaces o Occasionally required to drive or may be expected to drive at some point • Specialized equipment, machines, or vehicles used: Shuttles, Suburban's and trailers. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Compensation details: 32-35 Hourly Wage PIfb06f9e44c27-3941
06/24/2026
Full time
️You're more than a repair person-you're a problem solver, a troubleshooter, and the person people count on when something needs to be done right. ️ We're looking for a Skilled Maintenance Technician who can tackle challenges with confidence, think on their feet, and help maintain high-quality properties with care and precision. ️ The Skilled Maintenance Technician is a valuable member of the operations team. The position is responsible for performing maintenance duties in managed luxury homes. Exceptional knowledge of home maintenance, repair and troubleshooting in the following areas is essential: • Plumbing • A/V Equipment • Appliances • Fireplaces • Boilers and HVAC • Electrical • Carpentry • Painting • Drywall repair DUTIES AND RESPONSIBILITIES: • Maintenance • Weekly Property Checks o Weekly Trash and Bi-weekly Recycling Removal o Landscaping o Irrigation Maintenance o Snow Removal o Create Estimates for Repairs o Scheduling and coordination of property maintenance • Post departure and Pre-Arrival Property Checks • Home inspection, evaluation and repair • Vehicle Preventive Maintenance and Repair • Documentation of time worked and tasks completed for billable and non-billable tim • Required On-Call response as directed by reservations • Performs other related duties as assigned. • Some evening on-call shifts SUPERVISORY RESPONSIBILITIES: • This job has no supervisor responsibilities DESIRED SKILLS AND EXPERIENCES: • Maintenance Technicians must have and maintain a clean driving record to drive company vehicles • Qualifications: High school diploma or general education degree (GED). • Work Experience: 4+ years or more property maintenance experience and/or training, or equivalent combination of education and experience. • General Knowledge: Property Management, Home Maintenance, Carpentry, Irrigation Systems, Plumbing, Electrical, AV, Hot Tubs/Spa, Appliances, Computer skills • Company Culture: All managers and supervisors assume a leadership role within the MM team as an ambassador and protector of our company culture. • Flexibility: Demonstrates a willingness to assist in any role within the organization in times of need. Flexible working hours and ability to regularly work on weekends. • Adaptability: Demonstrates a willingness and ability to change as new systems are implemented. • Certificates, licenses and registrations required: Must have a valid driver's license or CDL with a clean driving record and must maintain a clean driving record. Confidence in driving large vehicle including shuttles and towing trailers. • Communication: Must possess excellent customer service skills, communication, and interpersonal skills. • Diversity: Ability to work with a diverse team and clientele. • Attitude: Personable and able to deal with variety of personality types. Positive attitude to solving problems. • Multi-tasking: Ability with logistics and coordination of simultaneous assignments • Work Ethic: Deadline driven, detail oriented and able to work autonomously but also as a team player. • Teamwork: Ability to interact positively with supervisor, management, coworkers, owners and guests. PHYSICAL DEMANDS AND WORK ENVIORNMENT: • Frequently required to stand and walk, talk and hear • Frequently required to climb, balance, bend, stoop, kneel or crawl • Continually required to utilize hand and finger dexterity • Continual exposure to wet and/or humid conditions (non-weather) • Continually exposure to outside weather conditions • Continually exposure to extreme heat or cold (non-weather) • While performing the duties of this job, the noise level in the work environment is usually moderate to loud • The employee must regularly lift and/or move up to 20 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds • Specific vision abilities required by this job include: Close vision; Distance vision; Color vision; Peripheral vision; Depth perception and ability to adjust focus • Additional remarks regarding work environment: o Able to get in and out of a vehicle o Must be able to walk on icy & slippery surfaces o Occasionally required to drive or may be expected to drive at some point • Specialized equipment, machines, or vehicles used: Shuttles, Suburban's and trailers. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Compensation details: 32-35 Hourly Wage PIfb06f9e44c27-3941
Description: Sunshine Disposal & Recycling has an opening for a Diesel Mechanic Technician for our Airway Heights and Spokane Valley, WA locations. This is a full-time job, Tuesday-Saturday. Current shift hours are 10:30 am- 7:00 pm Tuesday-Friday and 9:30am-6:00pm on Saturday. Shifts may be adjusted due to seasonal workloads. Pay rate is $35.00 per hour and includes wage bumps of 50 cents every 6 months up to 24 months of employment; as well as annual COLA wage adjustment beginning in 2027. There is a $1.00 per hour additional wage if the successful candidate holds a valid CDL at time of hire. Also included: $1000 bonus upon completion of 6 months of employment and $1,000 bonus upon completion of 12 months of employment. We are a drug free workplace, and testing is conducted in accordance with local laws and regulations. Sunshine Disposal & Recycling offers competitive wages and a comprehensive compensation package: paid PTO, paid holidays, company paid medical/dental/vision for employee (dependent coverage available, employee pays premiums), company provided Employee Assistance Plan, and 401(k) Plan with match (after meeting eligibility requirements). Optional life, accident and disability insurance available (employee pays premiums). This position participates in Boot Reimbursement and Safety Incentive programs. Sunshine Disposal & Recycling is an Equal Employment Opportunity employer. Sunshine Disposal & Recycling operates a modern and efficient fleet of commercial and non-commercial vehicles. All company vehicles use cameras with forward and inward facing event recording as well as vehicle location technology. JOB DUTIES: Conducts preventative maintenance of all SDR trucks and equipment. This includes daily inspecting, greasing and basic maintenance for road worthiness and effective use on routes and at various locations. Works directly under supervision and independently, to complete all assigned vehicle and equipment maintenance tasks as assigned. To perform this job successfully, an individual must be able to satisfactorily perform each of the essential duties/responsibilities listed below. Works directly under supervision and independently, to complete all assigned vehicle and equipment maintenance tasks as assigned. Conducts preventative maintenance of SD& R trucks and equipment. This includes daily inspecting, greasing and basic maintenance for road worthiness and effective use on routes and at various locations. Prepares and completes paperwork or computer data entry for all service and repair work for documentation and record keeping purposes. Ensures all records are compliant with Dept. of Transportation rules and company policies. Performs repair maintenance as assigned under supervision on trucks and equipment in the following areas: hydraulics, cylinders, brake repair, and electrical systems, engines and body (may include welding). Performs service on industrial and offroad equipment under supervision and/or independently at predetermined intervals in accordance with manufacturer specifications and any/all applicable local, state, and federal guidelines/regulations. Performs general facility maintenance, inventory tasks and/or clean up as assigned. Performs all other duties and special projects for management team members as assigned. Attends all necessary meetings as scheduled including safety, training and other company scheduled meetings. Requirements: Diesel Mechanic certification OR 2 years' work experience in full-service Diesel repair shop Valid USDOT medical Certificate (med card) required at time of hire Driving record must meet insurance company requirements Subject to drug screening as required by USDOT/FMCSA and company policy Must complete other safety and skills training when scheduled by the company Basic tools required at time of hire. Specialty tools supplied by the company. Class A or B CDL is preferred at time of hire and is REQUIRED within 2 years of hire date. Physical Requirements: Constantly (6+ hours per day) sit, stand, walk, stoop/crouch, crawl, grasp, fine manipulation, wrist flexion, reach, bend, twist, squat Frequently (3-5 hours per day) climb, lift (up to 50 pounds), pull/push (up to 50 pounds), carry and reach above shoulder level, kneel. Occasionally (1-3 hours per day) Lift (up to 75 pounds), pull/push (up to 75 pounds) Clearly see 20+ feet, with or without corrective lenses and differentiate between colors (no color blindness) Safety Matters: Sunshine operates a modern fleet of vehicles Dash/drive Cameras in vehicles Use of cellular phones and personal electronic devices while driving is prohibited No smoking or vaping allowed in vehicles Compensation details: 35-36 Hourly Wage PIe131cafc723a-5395
06/24/2026
Full time
Description: Sunshine Disposal & Recycling has an opening for a Diesel Mechanic Technician for our Airway Heights and Spokane Valley, WA locations. This is a full-time job, Tuesday-Saturday. Current shift hours are 10:30 am- 7:00 pm Tuesday-Friday and 9:30am-6:00pm on Saturday. Shifts may be adjusted due to seasonal workloads. Pay rate is $35.00 per hour and includes wage bumps of 50 cents every 6 months up to 24 months of employment; as well as annual COLA wage adjustment beginning in 2027. There is a $1.00 per hour additional wage if the successful candidate holds a valid CDL at time of hire. Also included: $1000 bonus upon completion of 6 months of employment and $1,000 bonus upon completion of 12 months of employment. We are a drug free workplace, and testing is conducted in accordance with local laws and regulations. Sunshine Disposal & Recycling offers competitive wages and a comprehensive compensation package: paid PTO, paid holidays, company paid medical/dental/vision for employee (dependent coverage available, employee pays premiums), company provided Employee Assistance Plan, and 401(k) Plan with match (after meeting eligibility requirements). Optional life, accident and disability insurance available (employee pays premiums). This position participates in Boot Reimbursement and Safety Incentive programs. Sunshine Disposal & Recycling is an Equal Employment Opportunity employer. Sunshine Disposal & Recycling operates a modern and efficient fleet of commercial and non-commercial vehicles. All company vehicles use cameras with forward and inward facing event recording as well as vehicle location technology. JOB DUTIES: Conducts preventative maintenance of all SDR trucks and equipment. This includes daily inspecting, greasing and basic maintenance for road worthiness and effective use on routes and at various locations. Works directly under supervision and independently, to complete all assigned vehicle and equipment maintenance tasks as assigned. To perform this job successfully, an individual must be able to satisfactorily perform each of the essential duties/responsibilities listed below. Works directly under supervision and independently, to complete all assigned vehicle and equipment maintenance tasks as assigned. Conducts preventative maintenance of SD& R trucks and equipment. This includes daily inspecting, greasing and basic maintenance for road worthiness and effective use on routes and at various locations. Prepares and completes paperwork or computer data entry for all service and repair work for documentation and record keeping purposes. Ensures all records are compliant with Dept. of Transportation rules and company policies. Performs repair maintenance as assigned under supervision on trucks and equipment in the following areas: hydraulics, cylinders, brake repair, and electrical systems, engines and body (may include welding). Performs service on industrial and offroad equipment under supervision and/or independently at predetermined intervals in accordance with manufacturer specifications and any/all applicable local, state, and federal guidelines/regulations. Performs general facility maintenance, inventory tasks and/or clean up as assigned. Performs all other duties and special projects for management team members as assigned. Attends all necessary meetings as scheduled including safety, training and other company scheduled meetings. Requirements: Diesel Mechanic certification OR 2 years' work experience in full-service Diesel repair shop Valid USDOT medical Certificate (med card) required at time of hire Driving record must meet insurance company requirements Subject to drug screening as required by USDOT/FMCSA and company policy Must complete other safety and skills training when scheduled by the company Basic tools required at time of hire. Specialty tools supplied by the company. Class A or B CDL is preferred at time of hire and is REQUIRED within 2 years of hire date. Physical Requirements: Constantly (6+ hours per day) sit, stand, walk, stoop/crouch, crawl, grasp, fine manipulation, wrist flexion, reach, bend, twist, squat Frequently (3-5 hours per day) climb, lift (up to 50 pounds), pull/push (up to 50 pounds), carry and reach above shoulder level, kneel. Occasionally (1-3 hours per day) Lift (up to 75 pounds), pull/push (up to 75 pounds) Clearly see 20+ feet, with or without corrective lenses and differentiate between colors (no color blindness) Safety Matters: Sunshine operates a modern fleet of vehicles Dash/drive Cameras in vehicles Use of cellular phones and personal electronic devices while driving is prohibited No smoking or vaping allowed in vehicles Compensation details: 35-36 Hourly Wage PIe131cafc723a-5395
Relay Technician Traineelocation: PLEASANT GROVE, UT, US, 84062 Company: PacifiCorp Power Your GreatnessPacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging.General PurposeTrain to become a Relay Technician through hands-on experience, formal technical coursework, and guided mentorship under an experienced Area Relay Technician. This role builds the foundational knowledge and skills required to progress to a journeyman-level position, supporting the reliable operation of substation protection, control, and metering systems.ResponsibilitiesA Relay Technician Trainee develops a working knowledge of substation equipment and systems while assisting with the installation, maintenance, testing, calibration, troubleshooting, and repair of equipment. This includes, but is not limited to, electromechanical, solid-state, and microprocessor-based protective relays; indicating and kWh/kW metering; recording devices such as sequence of events recorders and digital fault recorders; and control systems associated with breakers, transformers, regulators, capacitors, reactors, and related substation apparatus. The role also supports remote control and monitoring systems, including SCADA. This position requires strict adherence to safety standards and company policies. Work may be performed in confined spaces, at elevated heights, and with specialized equipment such as bucket and boom trucks. The role may involve working independently or as part of a team, responding to emergency conditions, and maintaining responsibility for assigned tools, test equipment, and vehicles. What you'll be doing: Attend technician training schools to learn relay standards and theory and complete electronic courses as specified for the Relay Technician Trainee program.Assist and complete work under the direction of Relay Technicians and Area Relay Technician as outlined on the Relay Technicians' job description.Keep and assist relay technicians in keeping records and files of work performed, reports on outages and trouble, and equipment records.Under supervision, the trainee participates in diagnostic and analytical testing of substation equipment, including power factor testing, transformer turns ratio testing, insulation resistance (megger) testing, and other assigned evaluations. The trainee will also gain experience operating substation equipment, including switching and grounding activities, in accordance with safety protocols.The typical duties described herein represent a major portion of the job. Other similar duties may be assigned. When management determines that it is efficient to do so, employees in this classification may be assigned duties of less complexity.RequirementsHigh School Diploma or GED, or proof of equivalentCertification in an electrical apprenticeship program or equivalent programDemonstrated ability to manage workload and use computerized test programBasic computer skills in MS Office (Word, Excel, Access, and Internet)Candidate must have good driving recordMust be able to obtain a CDLStrong ability to follow safety polities and proceduresMust have passed relay seminar examAdditional InformationPrimary Location: PLEASANT GROVE, UTCompany code: PacifiCorp : Power DeliverySchedule: FULL TIME, 100% onsitePersonnel Subarea: IBEW Local 57Hiring Range: $58.60 BENEFITS: At PacifiCorp, we understand that living a healthy lifestyle isn't just about your physical health - your mental, financial, and social wellbeing also play an important role. That's why we offer a wide range of benefits designed to help you live a more balanced lifestyle. Our Benefits include: Medical, dental, and vision insurance401k with match fixed contributions, including a Roth and saving option. For union employees, matching contributions vary by union. For nonunion, PacifiCorp makes a fixed contribution equal to 4% of your eligible pay each year for new hires. In addition, PacifiCorp matches 100% of the first 6% you contribute. Life insuranceAdditional voluntary benefits, including pet insuranceTuition AssistanceMass Transit Pass for employees in our Portland and Salt Lake City Offices. Work Life BalanceGenerous Paid Time Off (PTO) - Time off varies by employee type (Union or Non-Union)Paid short-term disability leave and long-term disability insurancePaid Parental LeavePaid Bereavement Leave Employee Assistance Program supporting mental and emotional wellbeing For more information, please visit: Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. Nearest Major Market: Salt Lake City Career Segment: Power Systems, Electrical, Technician, Trainee, Energy, Engineering, Entry Level, Technology Compensation details: 58.6-58.6 Hourly WagePIdc3e092c147d-8449
06/23/2026
Relay Technician Traineelocation: PLEASANT GROVE, UT, US, 84062 Company: PacifiCorp Power Your GreatnessPacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging.General PurposeTrain to become a Relay Technician through hands-on experience, formal technical coursework, and guided mentorship under an experienced Area Relay Technician. This role builds the foundational knowledge and skills required to progress to a journeyman-level position, supporting the reliable operation of substation protection, control, and metering systems.ResponsibilitiesA Relay Technician Trainee develops a working knowledge of substation equipment and systems while assisting with the installation, maintenance, testing, calibration, troubleshooting, and repair of equipment. This includes, but is not limited to, electromechanical, solid-state, and microprocessor-based protective relays; indicating and kWh/kW metering; recording devices such as sequence of events recorders and digital fault recorders; and control systems associated with breakers, transformers, regulators, capacitors, reactors, and related substation apparatus. The role also supports remote control and monitoring systems, including SCADA. This position requires strict adherence to safety standards and company policies. Work may be performed in confined spaces, at elevated heights, and with specialized equipment such as bucket and boom trucks. The role may involve working independently or as part of a team, responding to emergency conditions, and maintaining responsibility for assigned tools, test equipment, and vehicles. What you'll be doing: Attend technician training schools to learn relay standards and theory and complete electronic courses as specified for the Relay Technician Trainee program.Assist and complete work under the direction of Relay Technicians and Area Relay Technician as outlined on the Relay Technicians' job description.Keep and assist relay technicians in keeping records and files of work performed, reports on outages and trouble, and equipment records.Under supervision, the trainee participates in diagnostic and analytical testing of substation equipment, including power factor testing, transformer turns ratio testing, insulation resistance (megger) testing, and other assigned evaluations. The trainee will also gain experience operating substation equipment, including switching and grounding activities, in accordance with safety protocols.The typical duties described herein represent a major portion of the job. Other similar duties may be assigned. When management determines that it is efficient to do so, employees in this classification may be assigned duties of less complexity.RequirementsHigh School Diploma or GED, or proof of equivalentCertification in an electrical apprenticeship program or equivalent programDemonstrated ability to manage workload and use computerized test programBasic computer skills in MS Office (Word, Excel, Access, and Internet)Candidate must have good driving recordMust be able to obtain a CDLStrong ability to follow safety polities and proceduresMust have passed relay seminar examAdditional InformationPrimary Location: PLEASANT GROVE, UTCompany code: PacifiCorp : Power DeliverySchedule: FULL TIME, 100% onsitePersonnel Subarea: IBEW Local 57Hiring Range: $58.60 BENEFITS: At PacifiCorp, we understand that living a healthy lifestyle isn't just about your physical health - your mental, financial, and social wellbeing also play an important role. That's why we offer a wide range of benefits designed to help you live a more balanced lifestyle. Our Benefits include: Medical, dental, and vision insurance401k with match fixed contributions, including a Roth and saving option. For union employees, matching contributions vary by union. For nonunion, PacifiCorp makes a fixed contribution equal to 4% of your eligible pay each year for new hires. In addition, PacifiCorp matches 100% of the first 6% you contribute. Life insuranceAdditional voluntary benefits, including pet insuranceTuition AssistanceMass Transit Pass for employees in our Portland and Salt Lake City Offices. Work Life BalanceGenerous Paid Time Off (PTO) - Time off varies by employee type (Union or Non-Union)Paid short-term disability leave and long-term disability insurancePaid Parental LeavePaid Bereavement Leave Employee Assistance Program supporting mental and emotional wellbeing For more information, please visit: Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. Nearest Major Market: Salt Lake City Career Segment: Power Systems, Electrical, Technician, Trainee, Energy, Engineering, Entry Level, Technology Compensation details: 58.6-58.6 Hourly WagePIdc3e092c147d-8449
NW FLEET TRUCK TRAILER REPAIR INC
Seattle, Washington
Job Requirements: Accurately diagnose, repair, and maintain all parts and components on class 5 through class 8 trucks and trailing equipment in a timely manner and quality fashion, including but not limited to the following: • Perform front line mechanic inspections, preventive maintenance services and DOT inspections on both diesel and gasoline vehicles as well as trailers • Diagnose and repair air and hydraulic brake systems, suspension, and steering components • Diagnose and repair starting and charging system components • Diagnose, repair, and replace drive train components including transmissions, clutches, drivelines, and differentials • Perform all repairs to engines as needed including replacing cylinder heads, injectors, injection pumps, pistons, crankshafts, camshafts, gears, pumps, bearings, seals, gaskets, water pumps, engine electronics, etc. • Diagnosed and repair air conditioning systems including compressors, valves, condensers, and evaporators • Utilize diagnostic tools including laptops, scanners and wiring diagrams and measuring tools including a caliper • Diagnose and repair electrical and lighting systems, ABS systems, tire and brake monitoring systems, engine, body, and transmission electronics • Perform welding and fabrication with steel, stainless steel, and aluminum • Perform minor repairs on semi-trailers and truck cargo boxes including roll up and swing door repairs, tire replacement, brake repairs, suspension repairs, electrical systems and repair body panels, roofs, and frame rails • Respond to vehicle breakdowns in the field when requested • Assist other mechanics as needed • Operate Company vehicles in accordance with local, state, federal and Company policies and safe driving practices • Perform occasional facility maintenance for the Company and/or customer's facilities • Perform all other duties as assigned by Lead Mechanic, Shop Foreman, Area Fleet Manager or Shop Coordinator • Thoroughly, timely, neatly, and accurately document vehicle repairs and maintenance including a complete accounting of all labor hours, parts and materials used through maintenance software and daily worksheets • Provide excellent customer service and maintain a positive working relationship with all fleet, customer, and operations personnel • Display professional conduct with customers, co-workers, outside suppliers and contacts • Maintain safe and clean work areas • Take responsibility for and demonstrate safe work practices • Adhere to Company and OSHA safety guidelines • Operate a forklift as needed to perform repairs and move heavy parts Qualifications: • 3 to 5 years of relevant experience or combination of school and experience • Must have the skill level to diagnose, begin a job and see it through to completion with minimal guidance, ensuring tasks are executed efficiently and deadlines are met. • Provide own hand and air tools and storage for same • Valid Driver's license and good driving record required; CDL preferred but not required • Pass a criminal history background screen as required by our customer base • Be able to lift and install all parts required to perform the job including heavier parts such as brake drums, tires, flywheels, clutches, starters, suspension spring packs, etc. Benefits include: medical, health savings plan, dental, vision, vacation, sick pay, holiday pay, retirement plan, life insurance, uniforms provided Compensation details: 36-44 Hourly Wage PI6afe8-8641
06/23/2026
Full time
Job Requirements: Accurately diagnose, repair, and maintain all parts and components on class 5 through class 8 trucks and trailing equipment in a timely manner and quality fashion, including but not limited to the following: • Perform front line mechanic inspections, preventive maintenance services and DOT inspections on both diesel and gasoline vehicles as well as trailers • Diagnose and repair air and hydraulic brake systems, suspension, and steering components • Diagnose and repair starting and charging system components • Diagnose, repair, and replace drive train components including transmissions, clutches, drivelines, and differentials • Perform all repairs to engines as needed including replacing cylinder heads, injectors, injection pumps, pistons, crankshafts, camshafts, gears, pumps, bearings, seals, gaskets, water pumps, engine electronics, etc. • Diagnosed and repair air conditioning systems including compressors, valves, condensers, and evaporators • Utilize diagnostic tools including laptops, scanners and wiring diagrams and measuring tools including a caliper • Diagnose and repair electrical and lighting systems, ABS systems, tire and brake monitoring systems, engine, body, and transmission electronics • Perform welding and fabrication with steel, stainless steel, and aluminum • Perform minor repairs on semi-trailers and truck cargo boxes including roll up and swing door repairs, tire replacement, brake repairs, suspension repairs, electrical systems and repair body panels, roofs, and frame rails • Respond to vehicle breakdowns in the field when requested • Assist other mechanics as needed • Operate Company vehicles in accordance with local, state, federal and Company policies and safe driving practices • Perform occasional facility maintenance for the Company and/or customer's facilities • Perform all other duties as assigned by Lead Mechanic, Shop Foreman, Area Fleet Manager or Shop Coordinator • Thoroughly, timely, neatly, and accurately document vehicle repairs and maintenance including a complete accounting of all labor hours, parts and materials used through maintenance software and daily worksheets • Provide excellent customer service and maintain a positive working relationship with all fleet, customer, and operations personnel • Display professional conduct with customers, co-workers, outside suppliers and contacts • Maintain safe and clean work areas • Take responsibility for and demonstrate safe work practices • Adhere to Company and OSHA safety guidelines • Operate a forklift as needed to perform repairs and move heavy parts Qualifications: • 3 to 5 years of relevant experience or combination of school and experience • Must have the skill level to diagnose, begin a job and see it through to completion with minimal guidance, ensuring tasks are executed efficiently and deadlines are met. • Provide own hand and air tools and storage for same • Valid Driver's license and good driving record required; CDL preferred but not required • Pass a criminal history background screen as required by our customer base • Be able to lift and install all parts required to perform the job including heavier parts such as brake drums, tires, flywheels, clutches, starters, suspension spring packs, etc. Benefits include: medical, health savings plan, dental, vision, vacation, sick pay, holiday pay, retirement plan, life insurance, uniforms provided Compensation details: 36-44 Hourly Wage PI6afe8-8641
Peckham Industries Yard Operations Technician (CDL Req'd) Please wait while the page is processing chevron_left Back to Job Postings Yard Operations Technician (CDL Req'd) Apply Now Share via Email Print Position Title: Yard Operations Technician (CDL Req'd) Date Posted: 05/08/2026 Location: Fort Ann, NY Job Category: General Applicant Salary Interval: Seasonal Pay Range: $25.00 - $30.00 Application Instructions About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our family by choice ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the companys construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Position Description Job Summary: The Yard Operations Technician is a key support role responsible for maintaining efficient yard operations, transporting equipment and materials, and supporting field crews. This position combines CDL driving, equipment handling, yard organization, and basic maintenance responsibilities. The ideal candidate demonstrates a strong commitment to safety, operational efficiency, and teamwork in a fast-paced construction environment. Essential Functions: Protect family and friends. Safely transport construction equipment, materials, and tools to and from job sites using CDL Class A vehicles, ensuring timely and accurate deliveries that support field operations. Safety always wins. Load, secure, and unload equipment such as skid steers, rollers, broom tractors, and compressors in a manner that prevents damage and meets all safety and DOT requirements. Determined. Coordinate and execute the pickup and delivery of parts, tools, and supplies from local vendors to minimize downtime and keep crews operating efficiently. Committed to serve. Support logistics and freight handling activities by assisting with loading, unloading, and organizing incoming and outgoing materials. Obligated. Maintain an organized yard layout by positioning equipment and trailers to maximize accessibility, efficiency, and safe workflow. Dedication. Move trailers and equipment within the yard to support daily operations and ensure readiness for dispatch. Keep the yard clean, orderly, and hazard-free to promote a safe working environment for all employees. Perform routine preventative maintenance, including inspections, cleaning, and minor repairs, to extend equipment life and reduce breakdowns. Prepare equipment for field use by completing fueling, washdowns, and basic readiness checks to ensure reliability on job sites. Results matter . Conduct pre- and post-trip inspections and maintain compliance with DOT, OSHA, and company safety standards at all times. Mastery. Identify and address potential safety hazards proactively, contributing to a culture of safety and continuous improvement. Position Requirements Requirements, Education and Experience: Valid CDL Class A license required (restricted minimum; unrestricted preferred) with a clean driving record and strong commitment to safe vehicle operation. Flexibility to work variable hours, including early starts, overtime, and occasional weekends, based on operational needs. Experience in yard operations, construction, equipment handling, logistics, or a similar hands-on role involving material movement and heavy equipment. Working knowledge of DOT regulations, load securement, and general transportation and workplace safety standards (OSHA). Ability to safely operate, or willingness to learn to operate, heavy equipment such as skid steers, rollers, forklifts, and other construction machinery. Mechanical aptitude with the ability to perform basic preventative maintenance, inspections, and minor repairs on equipment. Strong organizational and communication skills, with the ability to coordinate logistics, manage yard efficiency, and support field operations. Familiarity with construction materials, equipment parts, and vendor sourcing is preferred. High attention to detail with a proactive, safety-first mindset and the ability to identify and address issues before they impact operations. Authorized to work in the U.S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require travel by personal vehicle to offices throughout the state of New York, and New England based on the needs of the business. Work Environment/Physical Demands: Heavy work that includes moving objects up to 100lbs or more. This position works outdoors in most types of weather including high heat, and inclement weather. This position works near moving mechanical parts and loud equipment. This position requires the ability to stand for long periods of time as well as bending, kneeling, squatting, climbing, walking, sitting, reaching, driving, and repetitive motion. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. Equal Opportunity Employer Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact . Please wait Compensation details: 25-30 Hourly Wage PIced1df2166c7-6126
06/23/2026
Full time
Peckham Industries Yard Operations Technician (CDL Req'd) Please wait while the page is processing chevron_left Back to Job Postings Yard Operations Technician (CDL Req'd) Apply Now Share via Email Print Position Title: Yard Operations Technician (CDL Req'd) Date Posted: 05/08/2026 Location: Fort Ann, NY Job Category: General Applicant Salary Interval: Seasonal Pay Range: $25.00 - $30.00 Application Instructions About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our family by choice ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the companys construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Position Description Job Summary: The Yard Operations Technician is a key support role responsible for maintaining efficient yard operations, transporting equipment and materials, and supporting field crews. This position combines CDL driving, equipment handling, yard organization, and basic maintenance responsibilities. The ideal candidate demonstrates a strong commitment to safety, operational efficiency, and teamwork in a fast-paced construction environment. Essential Functions: Protect family and friends. Safely transport construction equipment, materials, and tools to and from job sites using CDL Class A vehicles, ensuring timely and accurate deliveries that support field operations. Safety always wins. Load, secure, and unload equipment such as skid steers, rollers, broom tractors, and compressors in a manner that prevents damage and meets all safety and DOT requirements. Determined. Coordinate and execute the pickup and delivery of parts, tools, and supplies from local vendors to minimize downtime and keep crews operating efficiently. Committed to serve. Support logistics and freight handling activities by assisting with loading, unloading, and organizing incoming and outgoing materials. Obligated. Maintain an organized yard layout by positioning equipment and trailers to maximize accessibility, efficiency, and safe workflow. Dedication. Move trailers and equipment within the yard to support daily operations and ensure readiness for dispatch. Keep the yard clean, orderly, and hazard-free to promote a safe working environment for all employees. Perform routine preventative maintenance, including inspections, cleaning, and minor repairs, to extend equipment life and reduce breakdowns. Prepare equipment for field use by completing fueling, washdowns, and basic readiness checks to ensure reliability on job sites. Results matter . Conduct pre- and post-trip inspections and maintain compliance with DOT, OSHA, and company safety standards at all times. Mastery. Identify and address potential safety hazards proactively, contributing to a culture of safety and continuous improvement. Position Requirements Requirements, Education and Experience: Valid CDL Class A license required (restricted minimum; unrestricted preferred) with a clean driving record and strong commitment to safe vehicle operation. Flexibility to work variable hours, including early starts, overtime, and occasional weekends, based on operational needs. Experience in yard operations, construction, equipment handling, logistics, or a similar hands-on role involving material movement and heavy equipment. Working knowledge of DOT regulations, load securement, and general transportation and workplace safety standards (OSHA). Ability to safely operate, or willingness to learn to operate, heavy equipment such as skid steers, rollers, forklifts, and other construction machinery. Mechanical aptitude with the ability to perform basic preventative maintenance, inspections, and minor repairs on equipment. Strong organizational and communication skills, with the ability to coordinate logistics, manage yard efficiency, and support field operations. Familiarity with construction materials, equipment parts, and vendor sourcing is preferred. High attention to detail with a proactive, safety-first mindset and the ability to identify and address issues before they impact operations. Authorized to work in the U.S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require travel by personal vehicle to offices throughout the state of New York, and New England based on the needs of the business. Work Environment/Physical Demands: Heavy work that includes moving objects up to 100lbs or more. This position works outdoors in most types of weather including high heat, and inclement weather. This position works near moving mechanical parts and loud equipment. This position requires the ability to stand for long periods of time as well as bending, kneeling, squatting, climbing, walking, sitting, reaching, driving, and repetitive motion. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. Equal Opportunity Employer Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact . Please wait Compensation details: 25-30 Hourly Wage PIced1df2166c7-6126
Relay Technician Trainee location: PLEASANT GROVE, UT, US, 84062 Company: PacifiCorp Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. General Purpose Train to become a Relay Technician through hands-on experience, formal technical coursework, and guided mentorship under an experienced Area Relay Technician. This role builds the foundational knowledge and skills required to progress to a journeyman-level position, supporting the reliable operation of substation protection, control, and metering systems. Responsibilities A Relay Technician Trainee develops a working knowledge of substation equipment and systems while assisting with the installation, maintenance, testing, calibration, troubleshooting, and repair of equipment. This includes, but is not limited to, electromechanical, solid-state, and microprocessor-based protective relays; indicating and kWh/kW metering; recording devices such as sequence of events recorders and digital fault recorders; and control systems associated with breakers, transformers, regulators, capacitors, reactors, and related substation apparatus. The role also supports remote control and monitoring systems, including SCADA. This position requires strict adherence to safety standards and company policies. Work may be performed in confined spaces, at elevated heights, and with specialized equipment such as bucket and boom trucks. The role may involve working independently or as part of a team, responding to emergency conditions, and maintaining responsibility for assigned tools, test equipment, and vehicles. What you'll be doing: Attend technician training schools to learn relay standards and theory and complete electronic courses as specified for the Relay Technician Trainee program. Assist and complete work under the direction of Relay Technicians and Area Relay Technician as outlined on the Relay Technicians' job description. Keep and assist relay technicians in keeping records and files of work performed, reports on outages and trouble, and equipment records. Under supervision, the trainee participates in diagnostic and analytical testing of substation equipment, including power factor testing, transformer turns ratio testing, insulation resistance (megger) testing, and other assigned evaluations. The trainee will also gain experience operating substation equipment, including switching and grounding activities, in accordance with safety protocols. The typical duties described herein represent a major portion of the job. Other similar duties may be assigned. When management determines that it is efficient to do so, employees in this classification may be assigned duties of less complexity. Requirements High School Diploma or GED, or proof of equivalent Certification in an electrical apprenticeship program or equivalent program Demonstrated ability to manage workload and use computerized test program Basic computer skills in MS Office (Word, Excel, Access, and Internet) Candidate must have good driving record Must be able to obtain a CDL Strong ability to follow safety polities and procedures Must have passed relay seminar exam Additional Information Primary Location: PLEASANT GROVE, UT Company code: PacifiCorp Department: Power Delivery Schedule: FULL TIME, 100% onsite Personnel Subarea: IBEW Local 57 Hiring Range: $58.60 BENEFITS: At PacifiCorp, we understand that living a healthy lifestyle isn't just about your physical health - your mental, financial, and social wellbeing also play an important role. That's why we offer a wide range of benefits designed to help you live a more balanced lifestyle. Our Benefits include: Medical, dental, and vision insurance 401k with match fixed contributions, including a Roth and saving option. For union employees, matching contributions vary by union. For nonunion, PacifiCorp makes a fixed contribution equal to 4% of your eligible pay each year for new hires. In addition, PacifiCorp matches 100% of the first 6% you contribute. Life insurance Additional voluntary benefits, including pet insurance Tuition Assistance Mass Transit Pass for employees in our Portland and Salt Lake City Offices. Work Life Balance Generous Paid Time Off (PTO) - Time off varies by employee type (Union or Non-Union) Paid short-term disability leave and long-term disability insurance Paid Parental Leave Paid Bereavement Leave Employee Assistance Program supporting mental and emotional wellbeing For more information, please visit: Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. Nearest Major Market: Salt Lake City Career Segment: Power Systems, Electrical, Technician, Trainee, Energy, Engineering, Entry Level, Technology Compensation details: 58.6-58.6 Hourly Wage PI6d84fd4b361f-8449
06/23/2026
Full time
Relay Technician Trainee location: PLEASANT GROVE, UT, US, 84062 Company: PacifiCorp Power Your Greatness PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability, inclusion and belonging. General Purpose Train to become a Relay Technician through hands-on experience, formal technical coursework, and guided mentorship under an experienced Area Relay Technician. This role builds the foundational knowledge and skills required to progress to a journeyman-level position, supporting the reliable operation of substation protection, control, and metering systems. Responsibilities A Relay Technician Trainee develops a working knowledge of substation equipment and systems while assisting with the installation, maintenance, testing, calibration, troubleshooting, and repair of equipment. This includes, but is not limited to, electromechanical, solid-state, and microprocessor-based protective relays; indicating and kWh/kW metering; recording devices such as sequence of events recorders and digital fault recorders; and control systems associated with breakers, transformers, regulators, capacitors, reactors, and related substation apparatus. The role also supports remote control and monitoring systems, including SCADA. This position requires strict adherence to safety standards and company policies. Work may be performed in confined spaces, at elevated heights, and with specialized equipment such as bucket and boom trucks. The role may involve working independently or as part of a team, responding to emergency conditions, and maintaining responsibility for assigned tools, test equipment, and vehicles. What you'll be doing: Attend technician training schools to learn relay standards and theory and complete electronic courses as specified for the Relay Technician Trainee program. Assist and complete work under the direction of Relay Technicians and Area Relay Technician as outlined on the Relay Technicians' job description. Keep and assist relay technicians in keeping records and files of work performed, reports on outages and trouble, and equipment records. Under supervision, the trainee participates in diagnostic and analytical testing of substation equipment, including power factor testing, transformer turns ratio testing, insulation resistance (megger) testing, and other assigned evaluations. The trainee will also gain experience operating substation equipment, including switching and grounding activities, in accordance with safety protocols. The typical duties described herein represent a major portion of the job. Other similar duties may be assigned. When management determines that it is efficient to do so, employees in this classification may be assigned duties of less complexity. Requirements High School Diploma or GED, or proof of equivalent Certification in an electrical apprenticeship program or equivalent program Demonstrated ability to manage workload and use computerized test program Basic computer skills in MS Office (Word, Excel, Access, and Internet) Candidate must have good driving record Must be able to obtain a CDL Strong ability to follow safety polities and procedures Must have passed relay seminar exam Additional Information Primary Location: PLEASANT GROVE, UT Company code: PacifiCorp Department: Power Delivery Schedule: FULL TIME, 100% onsite Personnel Subarea: IBEW Local 57 Hiring Range: $58.60 BENEFITS: At PacifiCorp, we understand that living a healthy lifestyle isn't just about your physical health - your mental, financial, and social wellbeing also play an important role. That's why we offer a wide range of benefits designed to help you live a more balanced lifestyle. Our Benefits include: Medical, dental, and vision insurance 401k with match fixed contributions, including a Roth and saving option. For union employees, matching contributions vary by union. For nonunion, PacifiCorp makes a fixed contribution equal to 4% of your eligible pay each year for new hires. In addition, PacifiCorp matches 100% of the first 6% you contribute. Life insurance Additional voluntary benefits, including pet insurance Tuition Assistance Mass Transit Pass for employees in our Portland and Salt Lake City Offices. Work Life Balance Generous Paid Time Off (PTO) - Time off varies by employee type (Union or Non-Union) Paid short-term disability leave and long-term disability insurance Paid Parental Leave Paid Bereavement Leave Employee Assistance Program supporting mental and emotional wellbeing For more information, please visit: Employees must be able to perform the essential functions of the position with or without an accommodation. PacifiCorp is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, medical condition, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Unless otherwise required by law, all offers of employment are contingent upon the successful completion of a background check and drug screening including for marijuana. Nearest Major Market: Salt Lake City Career Segment: Power Systems, Electrical, Technician, Trainee, Energy, Engineering, Entry Level, Technology Compensation details: 58.6-58.6 Hourly Wage PI6d84fd4b361f-8449
Ascension FBO - Line Service Technician ARE YOU INTERESTED IN WORKING IN AVIATION? Are you interested in working in the business aviation industry and do you enjoy working outdoors with plenty of variety? As a Line Service Technician you will provide ground support to arriving and departing aircraft and customer service for crew members and their passengers. Objective: The Line Service Technician represents Ascension FBO in a positive and professional manner while providing aviation ground services to customers. Performance is primarily evaluated on the ability to operate safely in accordance with established procedures, and create a positive customer experience. _ General Responsibilities: • Active participation in new hire and recurrent training. • Conduct all operations in accordance with company policies and procedures. • Maintain high levels of safety and customer service. • Treat others with courtesy and respect. Primary Responsibilities: • Fuel, tow, wing walk and provide general ground support various aircraft in accordance with established procedures. • Marshal and greet aircraft in a professional and friendly manner. • Perform periodic checks of all equipment and facilities and document findings. • Maintain a clean and organized ramp, free of debris and clutter. • Maintain clean and organized facilities and hangars, free of debris and clutter. • Communicate customer feedback with the appropriate Ascension FBO personnel. • Perform various lawn care and janitorial services as assigned. • Immediately report safety incidents or hazards to appropriate management. • Initiate emergency and incident response procedures as required. • Other duties as assigned. Qualifications: • High School diploma or equivalent. • Minimum of 18 years of age. • Excellent customer relation skills. • Strong organizational skills. • Strong verbal communication skills and the ability to write legibly. • Basic math skills • Possess and maintain valid state driver's license. May be required to maintain a valid state commercial driver's license (CDL) and certification requirements for operating material handling equipment as necessary. • Stable job history Physical requirements: • Ability to perform line service operations outside and in extreme temperatures and inclement weather. • Excellent vision and coordination to move or direct fuel trucks and hoses. • Physically able to perform frequent walking, stretching, bending, sitting, stooping, reaching, grasping, and climbing actions. • Physically able to perform heavy lifting on a regular basis up to 50 pounds. • May be required to work overtime, nights, weekends. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Compensation details: 17 Hourly Wage PI9bf4b231cfff-0066
06/23/2026
Full time
Ascension FBO - Line Service Technician ARE YOU INTERESTED IN WORKING IN AVIATION? Are you interested in working in the business aviation industry and do you enjoy working outdoors with plenty of variety? As a Line Service Technician you will provide ground support to arriving and departing aircraft and customer service for crew members and their passengers. Objective: The Line Service Technician represents Ascension FBO in a positive and professional manner while providing aviation ground services to customers. Performance is primarily evaluated on the ability to operate safely in accordance with established procedures, and create a positive customer experience. _ General Responsibilities: • Active participation in new hire and recurrent training. • Conduct all operations in accordance with company policies and procedures. • Maintain high levels of safety and customer service. • Treat others with courtesy and respect. Primary Responsibilities: • Fuel, tow, wing walk and provide general ground support various aircraft in accordance with established procedures. • Marshal and greet aircraft in a professional and friendly manner. • Perform periodic checks of all equipment and facilities and document findings. • Maintain a clean and organized ramp, free of debris and clutter. • Maintain clean and organized facilities and hangars, free of debris and clutter. • Communicate customer feedback with the appropriate Ascension FBO personnel. • Perform various lawn care and janitorial services as assigned. • Immediately report safety incidents or hazards to appropriate management. • Initiate emergency and incident response procedures as required. • Other duties as assigned. Qualifications: • High School diploma or equivalent. • Minimum of 18 years of age. • Excellent customer relation skills. • Strong organizational skills. • Strong verbal communication skills and the ability to write legibly. • Basic math skills • Possess and maintain valid state driver's license. May be required to maintain a valid state commercial driver's license (CDL) and certification requirements for operating material handling equipment as necessary. • Stable job history Physical requirements: • Ability to perform line service operations outside and in extreme temperatures and inclement weather. • Excellent vision and coordination to move or direct fuel trucks and hoses. • Physically able to perform frequent walking, stretching, bending, sitting, stooping, reaching, grasping, and climbing actions. • Physically able to perform heavy lifting on a regular basis up to 50 pounds. • May be required to work overtime, nights, weekends. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Compensation details: 17 Hourly Wage PI9bf4b231cfff-0066
Starting Rate of Pay: $30.70 / hour POSITION OVERVIEW: To provide timely, quality, and cost-effective repair and maintenance for vehicle fleet including tractors, trailers, forklifts, and other equipment that requires preventive maintenance, troubleshooting, modifications, and repairs. ESSENTIAL FUNCTIONS: Performs preventative and routine maintenance on tractors, trailers, forklifts, and other equipment Performs basic diagnostics to identify source of trouble and makes necessary adjustments to equipment for safe and efficient operation Works with other technicians in performing preventative maintenance and repairs Ensures proper and accurate documentation of all maintenance performed, completes reports in writing and electronically Performs safety inspections of equipment and documents the work Performs paint and body work on vehicles, as required Comply with all applicable laws/regulations, as well as company policies/procedures Perform other duties as required Disclaimer: This job description is general in nature and is not designed to contain or to be interpreted as a comprehensive inventory of all duties, essential functions and qualifications required of employees assigned to the job. QUALIFICATIONS: High School Diploma (or GED), preferred Must have one (1) year experience performing vehicle maintenance or either possess (or be within sixty (60) days of obtaining) a vehicle maintenance certificate from an accredited vocation/trade school or completion of the FedEx Freight, Inc. Apprentice Program with satisfactory performance. One or more Medium/Heavy Truck ASE Certifications and Class A CDL preferred Must possess necessary tools to perform assigned tasks Valid driver's license may be required depending on work assignment Knowledge of the use and operation of testing equipment, gauges and tools associated with vehicle troubleshooting and repairs Basic computer skills including maintenance programs, and diagnostic systems Basic knowledge of gas and diesel engines Familiarity with precision measurement instruments, oxygen/acetylene equipment, and lifting devices (bottle, floor, wheel, or transmission jacks, floor cranes, etc.) preferred. Able to frequently lift components weighing approximately 110 pounds with appropriate equipment and/or assistance from another person Ability to safely operate vehicles equipped with manual and automatic transmission Ability to enter and exit driver's compartment of truck and/or behind cab using normally available foot and handholds Paint and body work experience preferred Ability to work independently and/or as a team member Basic written and verbal communication skills WORKING CONDITIONS: Exposure to heavy traffic areas while performing the duties of the job Exposure to considerable amounts of dust, diesel fumes and noise May be required to drive service van to off-site locations and perform work Exposure to climate conditions of the geographic area Exposure to chemicals, oils, greases, paints or other irritants Hours may vary due to operational need COMPENSATION USE FLSA Status: Exempt X Non-Exempt EST FedEx Freight, Inc FedEx Freight is an Equal Opportunity Employer, including disabled and veterans. If you have a disability and you need assistance in order to apply for a position with FedEx Freight, please e-mail at . FedEx Freight will not discharge or in any other manner discriminate against any employee or applicant for employment because such employee or applicant has inquired about, discussed, or disclosed the compensation of the employee or applicant or another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
06/21/2026
Full time
Starting Rate of Pay: $30.70 / hour POSITION OVERVIEW: To provide timely, quality, and cost-effective repair and maintenance for vehicle fleet including tractors, trailers, forklifts, and other equipment that requires preventive maintenance, troubleshooting, modifications, and repairs. ESSENTIAL FUNCTIONS: Performs preventative and routine maintenance on tractors, trailers, forklifts, and other equipment Performs basic diagnostics to identify source of trouble and makes necessary adjustments to equipment for safe and efficient operation Works with other technicians in performing preventative maintenance and repairs Ensures proper and accurate documentation of all maintenance performed, completes reports in writing and electronically Performs safety inspections of equipment and documents the work Performs paint and body work on vehicles, as required Comply with all applicable laws/regulations, as well as company policies/procedures Perform other duties as required Disclaimer: This job description is general in nature and is not designed to contain or to be interpreted as a comprehensive inventory of all duties, essential functions and qualifications required of employees assigned to the job. QUALIFICATIONS: High School Diploma (or GED), preferred Must have one (1) year experience performing vehicle maintenance or either possess (or be within sixty (60) days of obtaining) a vehicle maintenance certificate from an accredited vocation/trade school or completion of the FedEx Freight, Inc. Apprentice Program with satisfactory performance. One or more Medium/Heavy Truck ASE Certifications and Class A CDL preferred Must possess necessary tools to perform assigned tasks Valid driver's license may be required depending on work assignment Knowledge of the use and operation of testing equipment, gauges and tools associated with vehicle troubleshooting and repairs Basic computer skills including maintenance programs, and diagnostic systems Basic knowledge of gas and diesel engines Familiarity with precision measurement instruments, oxygen/acetylene equipment, and lifting devices (bottle, floor, wheel, or transmission jacks, floor cranes, etc.) preferred. Able to frequently lift components weighing approximately 110 pounds with appropriate equipment and/or assistance from another person Ability to safely operate vehicles equipped with manual and automatic transmission Ability to enter and exit driver's compartment of truck and/or behind cab using normally available foot and handholds Paint and body work experience preferred Ability to work independently and/or as a team member Basic written and verbal communication skills WORKING CONDITIONS: Exposure to heavy traffic areas while performing the duties of the job Exposure to considerable amounts of dust, diesel fumes and noise May be required to drive service van to off-site locations and perform work Exposure to climate conditions of the geographic area Exposure to chemicals, oils, greases, paints or other irritants Hours may vary due to operational need COMPENSATION USE FLSA Status: Exempt X Non-Exempt EST FedEx Freight, Inc FedEx Freight is an Equal Opportunity Employer, including disabled and veterans. If you have a disability and you need assistance in order to apply for a position with FedEx Freight, please e-mail at . FedEx Freight will not discharge or in any other manner discriminate against any employee or applicant for employment because such employee or applicant has inquired about, discussed, or disclosed the compensation of the employee or applicant or another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
Starting rate of pay $30.70/ hour POSITION OVERVIEW: To provide timely, quality, and cost-effective repair and maintenance for vehicle fleet including tractors, trailers, forklifts, and other equipment that requires preventive maintenance, troubleshooting, modifications, and repairs. ESSENTIAL FUNCTIONS: Performs preventative and routine maintenance on tractors, trailers, forklifts, and other equipment Performs basic diagnostics to identify source of trouble and makes necessary adjustments to equipment for safe and efficient operation Works with other technicians in performing preventative maintenance and repairs Ensures proper and accurate documentation of all maintenance performed, completes reports in writing and electronically Performs safety inspections of equipment and documents the work Performs paint and body work on vehicles, as required Comply with all applicable laws/regulations, as well as company policies/procedures Perform other duties as required Disclaimer: This job description is general in nature and is not designed to contain or to be interpreted as a comprehensive inventory of all duties, essential functions and qualifications required of employees assigned to the job. QUALIFICATIONS: High School Diploma (or GED), preferred Must have one (1) year experience performing vehicle maintenance or either possess (or be within sixty (60) days of obtaining) a vehicle maintenance certificate from an accredited vocation/trade school or completion of the FedEx Freight, Inc. Apprentice Program with satisfactory performance. One or more Medium/Heavy Truck ASE Certifications and Class A CDL preferred Must possess necessary tools to perform assigned tasks Valid driver's license may be required depending on work assignment Knowledge of the use and operation of testing equipment, gauges and tools associated with vehicle troubleshooting and repairs Basic computer skills including maintenance programs, and diagnostic systems Basic knowledge of gas and diesel engines Familiarity with precision measurement instruments, oxygen/acetylene equipment, and lifting devices (bottle, floor, wheel, or transmission jacks, floor cranes, etc.) preferred. Able to frequently lift components weighing approximately 110 pounds with appropriate equipment and/or assistance from another person Ability to safely operate vehicles equipped with manual and automatic transmission Ability to enter and exit driver's compartment of truck and/or behind cab using normally available foot and handholds Paint and body work experience preferred Ability to work independently and/or as a team member Basic written and verbal communication skills WORKING CONDITIONS: Exposure to heavy traffic areas while performing the duties of the job Exposure to considerable amounts of dust, diesel fumes and noise May be required to drive service van to off-site locations and perform work Exposure to climate conditions of the geographic area Exposure to chemicals, oils, greases, paints or other irritants Hours may vary due to operational need COMPENSATION USE FLSA Status: Exempt X Non-Exempt EST FedEx Freight, Inc FedEx Freight is an Equal Opportunity Employer, including disabled and veterans. If you have a disability and you need assistance in order to apply for a position with FedEx Freight, please e-mail at . FedEx Freight will not discharge or in any other manner discriminate against any employee or applicant for employment because such employee or applicant has inquired about, discussed, or disclosed the compensation of the employee or applicant or another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Pay: Hourly: $36.17 - $39.36 Compensation listed reflects the pay range or pay rate reasonably expected for this position. If this opportunity includes multiple job levels, the pay information represents the minimum and maximum range for all levels. Actual pay is determined by job-related factors permitted by law and relevant to the position, such as experience, tenure, market level, pay at the location, performance, schedule, and work assignment. Eligible employees offered health, vision, and dental insurance, employee assistance program, personal/sick paid time, 401(k) retirement savings plan, bonus potential, tuition reimbursement, adoption assistance, paid parental leave, paid bereavement, employee discounts, vacation (FT only), paid holidays (FT only).
06/21/2026
Full time
Starting rate of pay $30.70/ hour POSITION OVERVIEW: To provide timely, quality, and cost-effective repair and maintenance for vehicle fleet including tractors, trailers, forklifts, and other equipment that requires preventive maintenance, troubleshooting, modifications, and repairs. ESSENTIAL FUNCTIONS: Performs preventative and routine maintenance on tractors, trailers, forklifts, and other equipment Performs basic diagnostics to identify source of trouble and makes necessary adjustments to equipment for safe and efficient operation Works with other technicians in performing preventative maintenance and repairs Ensures proper and accurate documentation of all maintenance performed, completes reports in writing and electronically Performs safety inspections of equipment and documents the work Performs paint and body work on vehicles, as required Comply with all applicable laws/regulations, as well as company policies/procedures Perform other duties as required Disclaimer: This job description is general in nature and is not designed to contain or to be interpreted as a comprehensive inventory of all duties, essential functions and qualifications required of employees assigned to the job. QUALIFICATIONS: High School Diploma (or GED), preferred Must have one (1) year experience performing vehicle maintenance or either possess (or be within sixty (60) days of obtaining) a vehicle maintenance certificate from an accredited vocation/trade school or completion of the FedEx Freight, Inc. Apprentice Program with satisfactory performance. One or more Medium/Heavy Truck ASE Certifications and Class A CDL preferred Must possess necessary tools to perform assigned tasks Valid driver's license may be required depending on work assignment Knowledge of the use and operation of testing equipment, gauges and tools associated with vehicle troubleshooting and repairs Basic computer skills including maintenance programs, and diagnostic systems Basic knowledge of gas and diesel engines Familiarity with precision measurement instruments, oxygen/acetylene equipment, and lifting devices (bottle, floor, wheel, or transmission jacks, floor cranes, etc.) preferred. Able to frequently lift components weighing approximately 110 pounds with appropriate equipment and/or assistance from another person Ability to safely operate vehicles equipped with manual and automatic transmission Ability to enter and exit driver's compartment of truck and/or behind cab using normally available foot and handholds Paint and body work experience preferred Ability to work independently and/or as a team member Basic written and verbal communication skills WORKING CONDITIONS: Exposure to heavy traffic areas while performing the duties of the job Exposure to considerable amounts of dust, diesel fumes and noise May be required to drive service van to off-site locations and perform work Exposure to climate conditions of the geographic area Exposure to chemicals, oils, greases, paints or other irritants Hours may vary due to operational need COMPENSATION USE FLSA Status: Exempt X Non-Exempt EST FedEx Freight, Inc FedEx Freight is an Equal Opportunity Employer, including disabled and veterans. If you have a disability and you need assistance in order to apply for a position with FedEx Freight, please e-mail at . FedEx Freight will not discharge or in any other manner discriminate against any employee or applicant for employment because such employee or applicant has inquired about, discussed, or disclosed the compensation of the employee or applicant or another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Pay: Hourly: $36.17 - $39.36 Compensation listed reflects the pay range or pay rate reasonably expected for this position. If this opportunity includes multiple job levels, the pay information represents the minimum and maximum range for all levels. Actual pay is determined by job-related factors permitted by law and relevant to the position, such as experience, tenure, market level, pay at the location, performance, schedule, and work assignment. Eligible employees offered health, vision, and dental insurance, employee assistance program, personal/sick paid time, 401(k) retirement savings plan, bonus potential, tuition reimbursement, adoption assistance, paid parental leave, paid bereavement, employee discounts, vacation (FT only), paid holidays (FT only).