TITLE: Shift Leader (SL) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details
06/20/2026
Full time
TITLE: Shift Leader (SL) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details
Description: CWS is a leading provider of waste management services throughout South Carolina, Tennessee, Georgia, Virginia, and Florida areas . We are committed to providing superior customer service with our emphasis on integrity, reliability and cleanliness. We invest in our community, our customers and our employees by providing access to state-of-the-art systems and processes, and the best leadership in the business! POSITION SUMMARY: Responsible for marketing and selling assigned Capital Waste services to existing and potential customers to increase profitable revenue. Responsible for achieving budgeted sales and retention goals for accounts as assigned MINIMUM REQUIREMENTS: Education: High School Diploma, GED and/or equivalent work experience. An Associates' Degree in Business Administration or Sales and Marketing is preferred Years of Experience: At least 3 years of related experience. A minimum of 2 years' experience in Solid Waste and/or a service-related industry is preferred PRIMARY DUTIES AND RESPONSIBILITIES: This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. Establish and maintain a high level of customer satisfaction by meeting customer retention goals, resolving customer issues in a timely manner, and solving accounts receivable and service problems. Communicate to and work with the Sales Manager/General Manager to resolve unique customer issues Generate revenue through the sale of services to new and existing accounts. Increase existing account revenue. Meet or exceed sales all activity goals for both new sales and retention Demonstrate basic knowledge of technical equipment Acquire fundamental knowledge of potential customers, pricing and competition Gain an understanding of and execute the division's pricing and service strategies Identify and engage other sister company opportunities Effectively use Capital Waste Services' sales tools. Prepare timely and accurate sales activity reports Acquire a fundamental understanding of appropriate local, state and Federal regulations KNOWLEDGE, SKILLS, AND ABILITIES: Demonstrated organizational, oral, written, and listening skills Proficient computer skills Excellent selling and account management skills Ability to communicate professionally with internal and external customers Ability to generate and manage leads, opportunities and contract negotiations to close business Effective influential, selling, and closing skills Ability to read, write, and comprehend reports and associated documents Ability to understand and follow oral and written instructions Ability to prioritize workload and meet time sensitive deadlines Strong work ethic, demonstrating integrity, trust, and maintain confidentiality Strong interpersonal skills, including effective presentation and listening skills. Flexibility to accept and adapt to change, as well as the commitment to seek continuous improvement Demonstrate strong business acumen and ability to work effectively across various teams and levels Demonstrate continuous effort to improve operation, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality seamless customer service Excellent analytical, attention to detail, and problem-solving skills MACHINES, TOOLS, EQUIPMENT AND SOFTWARE USED: Usual office equipment including computer, phone, fax machine, copier and calculator MS Office including Word, Excel and Outlook WORK ENVIRONMENT: Usual office environment May require travel to area businesses, multiple sites including transfer stations and/or landfills TYPICAL PHYSICAL DEMANDS: Ability to organize various office systems through adjusting, connecting, lifting, pulling, pushing, bending or folding for the purpose of proper records development and/or management Ability to use a computer and related devices, such as a keyboard or mouse or other related equipment, throughout the workday while seated at a desk or workstation Possess speaking skills and hearing ability to interact with customers on the telephone PREFERRED: Bachelor's degree in business administration, advertising, marketing or related field Solid Waste industry or ancillary experience Requirements: PIa11fde8e08e9-6104
06/20/2026
Full time
Description: CWS is a leading provider of waste management services throughout South Carolina, Tennessee, Georgia, Virginia, and Florida areas . We are committed to providing superior customer service with our emphasis on integrity, reliability and cleanliness. We invest in our community, our customers and our employees by providing access to state-of-the-art systems and processes, and the best leadership in the business! POSITION SUMMARY: Responsible for marketing and selling assigned Capital Waste services to existing and potential customers to increase profitable revenue. Responsible for achieving budgeted sales and retention goals for accounts as assigned MINIMUM REQUIREMENTS: Education: High School Diploma, GED and/or equivalent work experience. An Associates' Degree in Business Administration or Sales and Marketing is preferred Years of Experience: At least 3 years of related experience. A minimum of 2 years' experience in Solid Waste and/or a service-related industry is preferred PRIMARY DUTIES AND RESPONSIBILITIES: This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. Establish and maintain a high level of customer satisfaction by meeting customer retention goals, resolving customer issues in a timely manner, and solving accounts receivable and service problems. Communicate to and work with the Sales Manager/General Manager to resolve unique customer issues Generate revenue through the sale of services to new and existing accounts. Increase existing account revenue. Meet or exceed sales all activity goals for both new sales and retention Demonstrate basic knowledge of technical equipment Acquire fundamental knowledge of potential customers, pricing and competition Gain an understanding of and execute the division's pricing and service strategies Identify and engage other sister company opportunities Effectively use Capital Waste Services' sales tools. Prepare timely and accurate sales activity reports Acquire a fundamental understanding of appropriate local, state and Federal regulations KNOWLEDGE, SKILLS, AND ABILITIES: Demonstrated organizational, oral, written, and listening skills Proficient computer skills Excellent selling and account management skills Ability to communicate professionally with internal and external customers Ability to generate and manage leads, opportunities and contract negotiations to close business Effective influential, selling, and closing skills Ability to read, write, and comprehend reports and associated documents Ability to understand and follow oral and written instructions Ability to prioritize workload and meet time sensitive deadlines Strong work ethic, demonstrating integrity, trust, and maintain confidentiality Strong interpersonal skills, including effective presentation and listening skills. Flexibility to accept and adapt to change, as well as the commitment to seek continuous improvement Demonstrate strong business acumen and ability to work effectively across various teams and levels Demonstrate continuous effort to improve operation, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality seamless customer service Excellent analytical, attention to detail, and problem-solving skills MACHINES, TOOLS, EQUIPMENT AND SOFTWARE USED: Usual office equipment including computer, phone, fax machine, copier and calculator MS Office including Word, Excel and Outlook WORK ENVIRONMENT: Usual office environment May require travel to area businesses, multiple sites including transfer stations and/or landfills TYPICAL PHYSICAL DEMANDS: Ability to organize various office systems through adjusting, connecting, lifting, pulling, pushing, bending or folding for the purpose of proper records development and/or management Ability to use a computer and related devices, such as a keyboard or mouse or other related equipment, throughout the workday while seated at a desk or workstation Possess speaking skills and hearing ability to interact with customers on the telephone PREFERRED: Bachelor's degree in business administration, advertising, marketing or related field Solid Waste industry or ancillary experience Requirements: PIa11fde8e08e9-6104
Mid-Continent Instruments and Avionics
Leoti, Kansas
Job Description Job Description COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As Engineering Manager, you will be responsible for planning, leading, and successfully completing new product development projects. Projects encompass involvement and oversight of the entire product development lifecycle including concept, design, test, certification, production rollout, and ongoing support. To be successful in this role, you'll need to demonstrate sound leadership, high level time management and organizational skills, and a results-oriented focus. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in mechanical or electrical engineering You have a minimum of 10 years of experience designing and/or managing development of electro-mechanical products You have a minimum of 5 years of experience managing direct reports You have experience managing product development in a regulated industry You have experience in a manufacturing environment You have experience using design, ERP, and project management software tools You are proficient with Microsoft Office. You have strong attention to detail, are organized, and are results oriented You are a problem-solver with critical thinking and prioritizing skills You have excellent verbal, written and interpersonal communication skills WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have a working knowledge of environmental requirements such as RTCA DO-160 or similar aerospace, military, or commercial standards You have managed projects and teams with a technically diverse cross-functional organizational matrix WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Lead multiple, simultaneous product development projects from start to support, including team dynamics, schedule, technical resolutions, progress tracking, and scope management Coach, mentor, motivate and develop direct reports Direct all phases of product development, including verification of compliance to all applicable regulatory, customer/market, and quality requirements Drive projects to meet company and engineering time, cost and performance targets Contribute to technical problem solving through reviews, support, and direct product design as needed Collaborate with cross-functional and departmental teams to achieve win-win solutions throughout the product development and production implementation process Work with Sales and customers, including limited travel, to support new opportunities on technical and programmatic topics Interact with the FAA and other regulatory agencies as needed to support the certification and compliance of our products and their integration at the aircraft level Research and evaluate new components, technologies, and methods to incorporate into new designs Support technical inquiries from internal and external customers for new and legacy products WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career and maintain a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day , monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events. We have a small company feel even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionicsprovides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us to be a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI26f8f8258d82-8997
06/20/2026
Full time
Job Description Job Description COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As Engineering Manager, you will be responsible for planning, leading, and successfully completing new product development projects. Projects encompass involvement and oversight of the entire product development lifecycle including concept, design, test, certification, production rollout, and ongoing support. To be successful in this role, you'll need to demonstrate sound leadership, high level time management and organizational skills, and a results-oriented focus. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in mechanical or electrical engineering You have a minimum of 10 years of experience designing and/or managing development of electro-mechanical products You have a minimum of 5 years of experience managing direct reports You have experience managing product development in a regulated industry You have experience in a manufacturing environment You have experience using design, ERP, and project management software tools You are proficient with Microsoft Office. You have strong attention to detail, are organized, and are results oriented You are a problem-solver with critical thinking and prioritizing skills You have excellent verbal, written and interpersonal communication skills WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have a working knowledge of environmental requirements such as RTCA DO-160 or similar aerospace, military, or commercial standards You have managed projects and teams with a technically diverse cross-functional organizational matrix WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Lead multiple, simultaneous product development projects from start to support, including team dynamics, schedule, technical resolutions, progress tracking, and scope management Coach, mentor, motivate and develop direct reports Direct all phases of product development, including verification of compliance to all applicable regulatory, customer/market, and quality requirements Drive projects to meet company and engineering time, cost and performance targets Contribute to technical problem solving through reviews, support, and direct product design as needed Collaborate with cross-functional and departmental teams to achieve win-win solutions throughout the product development and production implementation process Work with Sales and customers, including limited travel, to support new opportunities on technical and programmatic topics Interact with the FAA and other regulatory agencies as needed to support the certification and compliance of our products and their integration at the aircraft level Research and evaluate new components, technologies, and methods to incorporate into new designs Support technical inquiries from internal and external customers for new and legacy products WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career and maintain a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day , monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events. We have a small company feel even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionicsprovides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us to be a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI26f8f8258d82-8997
University of New Mexico - Hospitals
Albuquerque, New Mexico
RN INPATIENT - All Progressive Care Units (PCU) - Day & Night Shifts - University of New Mexico Hospital - Albuquerque We have immediate RN hiring across our PCU departments. All shifts available! Part Time & Full Time. Apply and we will have a hiring manager contact you within 48 hours to discuss your interests and placement. Sign-On Bonus Available Relocation Assistance Available Rate based on experience: Minimum $34.84 (RN Inpatient II) to Max: $47.33 (RN Inpatient V) Receive 17% Weekday Nights, 26% Weekend Nights and 15% Weekend Day shift differentials Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. CURRENTLY HIRING: Coronary Care Subacute The Adult Inpatient Admission Unit (PAAU) A fast paced, high throughput unit that serves as both an Observation Unit and a bridge for patients transitioning from the Emergency Department to the Progressive Care Units. Nurses in the PAAU manage diverse patient populations across multiple specialties in a highly collaborative environment. Adult Oncology Serve patients who are receiving chemotherapy, stem cell transplants, radiation and more. We also participate in research measures aimed at preventing and treating cancer diagnoses. We are New Mexico's only NCI designated Comprehensive Cancer Center and one of only 51 in the United States. Family Medicine Inpatient (3-N) Patient population ranges from End Stage Renal Disease, Liver Failure, Mobility Issues, Surgical and more. We also are the secondary unit for Cystic Fibrosis patients. Gen Med/SAC (4-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. General Medicine (5-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Cystic Fibrosis. We also were the primary COVID unit during the height of the pandemic. General Surgery/Transplant (6-S) Care for primarily pre-op and post-op renal transplant patients as well as some patients needing to be treated for transplant rejection. We also care for surgical oncology, hepatobiliary and general surgery patients. Trauma Subacute (4-E) Patient population consists of primarily trauma patients along with specialties such as chronic pain, complex ENT patients, and everything in between. Orthopedics (3-S) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. Surgical Specialty Unit (4-S) Service a wide variety of patient populations being cared by services such as General Surgery, Emergency General Surgery, Urology, Plastics and more. We see a lot of patients with surgical drains, complicated wounds, wound VAC's, chest tubes, indwelling urinary catheters, ostomies and the occasional trach . Neuroscience (5-S) Serve patients who have experienced stroke, seizures, traumatic brain injuries, spinal injuries, multiple sclerosis and more. We have been designated by the American Heart Association/American Stroke Association as a Primary Advanced Stroke Center. JOB SUMMARY Work within the nursing process to provide direct nursing care to assigned patients. Provide clinical leadership for other staff and assume relief charge duties when designated. Serve as a role model to promote a positive work environment and quality patient care. Ensure adherence to Hospitals and departmental policies and procedures. Patient care assignment may include Neonate, Pediatric, Adolescent, Adult and Geriatric age groups. ESSENTIAL FUNCTIONS - Essential and other responsibilities and duties may include but are not limited to the following: PATIENT CARE - Deliver safe direct care to an assigned group of patients as required POLICIES - Work within Hospitals, Nursing division and departmental policies CARE PLAN - Work in collaboration with the healthcare team, implement and document individualized care plans incorporating age specific considerations, including discharge planning and patient/family teaching TESTS AND PROCEDURES - Assist with special tests and procedures, ensure proper consent has been obtained PARTICIPATION - Participate in orientation; upon successful completion of preceptor training assume precepting and evaluation responsibilities of new personnel EMERGENCY MEASURES - Assist with or institute emergency measures for sudden, adverse developments in patients MEDICAL RECORDS - Ensure that patient medical records contain necessary information INQUIRIES - Answer telephones and triage calls as per departmental policy MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings ENVIRONMENT - Maintain a safe, comfortable, and therapeutic environment for patients/families in accordance with Hospitals standards DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MINIMUM QUALIFICATIONS EDUCATION: Nursing program (nationally accredited) graduate CERTIFICATIONS: RN MATRIX - Complete and maintain unit/clinic based required certifications and competencies as listed in the department expectations/and or the unit/clinic education matrix LICENSES/CERTIFICATIONS: Licensed Registered Nurse (RN) in State of New Mexico or as allowed by reciprocal agreement by State of New Mexico CPR Certification for Healthcare/BLS Providers or for Professional Rescuers or must obtain within 30 calendar days of date of position TESTING REQUIREMENTS: Obtain UNMH IV Verification within 6 months of position Tuberculosis testing is completed upon hire and additionally as required PREFERRED QUALIFICATIONS PREFERRED EDUCATION: Bachelor's Degree of Science in Nursing PREFERRED EXPERIENCE: Bilingual English/Spanish Bilingual English/Keres, Tewa, Tiwa, Towa, Zuni, or Navajo PREFERRED LICENSURE/CERTIFICATION: Nationally Certified in area of specialty WORKING CONDITIONS ENVIRONMENTAL CONDITIONS: Sig Hazard: Chemicals, bio hazardous materials requiring extensive safety precautions and may require protective equipment PHYSICAL CONDITIONS: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Department: Registered Nurse
06/20/2026
Full time
RN INPATIENT - All Progressive Care Units (PCU) - Day & Night Shifts - University of New Mexico Hospital - Albuquerque We have immediate RN hiring across our PCU departments. All shifts available! Part Time & Full Time. Apply and we will have a hiring manager contact you within 48 hours to discuss your interests and placement. Sign-On Bonus Available Relocation Assistance Available Rate based on experience: Minimum $34.84 (RN Inpatient II) to Max: $47.33 (RN Inpatient V) Receive 17% Weekday Nights, 26% Weekend Nights and 15% Weekend Day shift differentials Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. CURRENTLY HIRING: Coronary Care Subacute The Adult Inpatient Admission Unit (PAAU) A fast paced, high throughput unit that serves as both an Observation Unit and a bridge for patients transitioning from the Emergency Department to the Progressive Care Units. Nurses in the PAAU manage diverse patient populations across multiple specialties in a highly collaborative environment. Adult Oncology Serve patients who are receiving chemotherapy, stem cell transplants, radiation and more. We also participate in research measures aimed at preventing and treating cancer diagnoses. We are New Mexico's only NCI designated Comprehensive Cancer Center and one of only 51 in the United States. Family Medicine Inpatient (3-N) Patient population ranges from End Stage Renal Disease, Liver Failure, Mobility Issues, Surgical and more. We also are the secondary unit for Cystic Fibrosis patients. Gen Med/SAC (4-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. General Medicine (5-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Cystic Fibrosis. We also were the primary COVID unit during the height of the pandemic. General Surgery/Transplant (6-S) Care for primarily pre-op and post-op renal transplant patients as well as some patients needing to be treated for transplant rejection. We also care for surgical oncology, hepatobiliary and general surgery patients. Trauma Subacute (4-E) Patient population consists of primarily trauma patients along with specialties such as chronic pain, complex ENT patients, and everything in between. Orthopedics (3-S) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. Surgical Specialty Unit (4-S) Service a wide variety of patient populations being cared by services such as General Surgery, Emergency General Surgery, Urology, Plastics and more. We see a lot of patients with surgical drains, complicated wounds, wound VAC's, chest tubes, indwelling urinary catheters, ostomies and the occasional trach . Neuroscience (5-S) Serve patients who have experienced stroke, seizures, traumatic brain injuries, spinal injuries, multiple sclerosis and more. We have been designated by the American Heart Association/American Stroke Association as a Primary Advanced Stroke Center. JOB SUMMARY Work within the nursing process to provide direct nursing care to assigned patients. Provide clinical leadership for other staff and assume relief charge duties when designated. Serve as a role model to promote a positive work environment and quality patient care. Ensure adherence to Hospitals and departmental policies and procedures. Patient care assignment may include Neonate, Pediatric, Adolescent, Adult and Geriatric age groups. ESSENTIAL FUNCTIONS - Essential and other responsibilities and duties may include but are not limited to the following: PATIENT CARE - Deliver safe direct care to an assigned group of patients as required POLICIES - Work within Hospitals, Nursing division and departmental policies CARE PLAN - Work in collaboration with the healthcare team, implement and document individualized care plans incorporating age specific considerations, including discharge planning and patient/family teaching TESTS AND PROCEDURES - Assist with special tests and procedures, ensure proper consent has been obtained PARTICIPATION - Participate in orientation; upon successful completion of preceptor training assume precepting and evaluation responsibilities of new personnel EMERGENCY MEASURES - Assist with or institute emergency measures for sudden, adverse developments in patients MEDICAL RECORDS - Ensure that patient medical records contain necessary information INQUIRIES - Answer telephones and triage calls as per departmental policy MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings ENVIRONMENT - Maintain a safe, comfortable, and therapeutic environment for patients/families in accordance with Hospitals standards DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MINIMUM QUALIFICATIONS EDUCATION: Nursing program (nationally accredited) graduate CERTIFICATIONS: RN MATRIX - Complete and maintain unit/clinic based required certifications and competencies as listed in the department expectations/and or the unit/clinic education matrix LICENSES/CERTIFICATIONS: Licensed Registered Nurse (RN) in State of New Mexico or as allowed by reciprocal agreement by State of New Mexico CPR Certification for Healthcare/BLS Providers or for Professional Rescuers or must obtain within 30 calendar days of date of position TESTING REQUIREMENTS: Obtain UNMH IV Verification within 6 months of position Tuberculosis testing is completed upon hire and additionally as required PREFERRED QUALIFICATIONS PREFERRED EDUCATION: Bachelor's Degree of Science in Nursing PREFERRED EXPERIENCE: Bilingual English/Spanish Bilingual English/Keres, Tewa, Tiwa, Towa, Zuni, or Navajo PREFERRED LICENSURE/CERTIFICATION: Nationally Certified in area of specialty WORKING CONDITIONS ENVIRONMENTAL CONDITIONS: Sig Hazard: Chemicals, bio hazardous materials requiring extensive safety precautions and may require protective equipment PHYSICAL CONDITIONS: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Department: Registered Nurse
Job Description Job Description Electrical Foreman / Superintendent (Commercial Construction - Mid-Rise Projects) Baltimore, MD Full-Time On-Site Position Summary We are seeking a highly experienced Electrical Foreman / Superintendent to lead and oversee mid-rise commercial electrical construction projects in the Baltimore area. This hybrid role combines hands-on field leadership with high-level project oversight, bridging the gap between field execution and project management. The ideal candidate is a strong leader with deep technical expertise who can manage crews, coordinate across trades, and drive project performance from planning through completion. This individual will play a critical role in ensuring projects are delivered safely, on schedule, within budget, and to the highest quality standards. Key Responsibilities Lead and oversee medium- to large-scale electrical construction projects from start to finish Supervise, mentor, and manage field personnel while maintaining accountability for performance and productivity Plan and manage project schedules, manpower forecasting, and labor allocation Coordinate closely with Project Managers, General Contractors, owners, and design teams Interpret and enforce construction drawings, specifications, and electrical codes Monitor project progress, proactively resolve issues, and adjust resources to meet deadlines Oversee material procurement, equipment logistics, and site readiness Ensure compliance with safety regulations, company policies, and quality standards Maintain detailed daily reports, project documentation, and progress updates Identify cost-saving opportunities and implement process improvements Act as the on-site leader responsible for both execution and overall project coordination Qualifications High school diploma or equivalent (required) 5+ years of experience in commercial electrical construction 5+ years in a leadership role (Foreman, Lead Foreman, or similar) Proven ability to manage large-scale commercial projects with superintendent-level responsibilities Strong knowledge of electrical systems, installation methods, and job site coordination Ability to read and interpret blueprints, schematics, and construction documents Excellent leadership, communication, and problem-solving skills Proficiency with Microsoft Office and project management tools Strong organizational and time-management abilities Ability to manage multiple priorities in fast-paced environments Willingness to work flexible hours, including evenings and weekends as needed Working Conditions Active construction site environment Frequent standing, walking, bending, and lifting Conditions vary depending on project phase and site requirements Compensation & Benefits $57/hour (competitive pay) Medical and dental insurance Paid time off (PTO) 401(k) retirement plan Tuition reimbursement opportunities Job Type Full-Time On-Site (Baltimore, MD) Company Description Talent Corps is an equal opportunity employer. We value diversity and encourage applicants from all backgrounds, including veterans and individuals with disabilities, to apply. Company Description Talent Corps is an equal opportunity employer. We value diversity and encourage applicants from all backgrounds, including veterans and individuals with disabilities, to apply.
06/20/2026
Full time
Job Description Job Description Electrical Foreman / Superintendent (Commercial Construction - Mid-Rise Projects) Baltimore, MD Full-Time On-Site Position Summary We are seeking a highly experienced Electrical Foreman / Superintendent to lead and oversee mid-rise commercial electrical construction projects in the Baltimore area. This hybrid role combines hands-on field leadership with high-level project oversight, bridging the gap between field execution and project management. The ideal candidate is a strong leader with deep technical expertise who can manage crews, coordinate across trades, and drive project performance from planning through completion. This individual will play a critical role in ensuring projects are delivered safely, on schedule, within budget, and to the highest quality standards. Key Responsibilities Lead and oversee medium- to large-scale electrical construction projects from start to finish Supervise, mentor, and manage field personnel while maintaining accountability for performance and productivity Plan and manage project schedules, manpower forecasting, and labor allocation Coordinate closely with Project Managers, General Contractors, owners, and design teams Interpret and enforce construction drawings, specifications, and electrical codes Monitor project progress, proactively resolve issues, and adjust resources to meet deadlines Oversee material procurement, equipment logistics, and site readiness Ensure compliance with safety regulations, company policies, and quality standards Maintain detailed daily reports, project documentation, and progress updates Identify cost-saving opportunities and implement process improvements Act as the on-site leader responsible for both execution and overall project coordination Qualifications High school diploma or equivalent (required) 5+ years of experience in commercial electrical construction 5+ years in a leadership role (Foreman, Lead Foreman, or similar) Proven ability to manage large-scale commercial projects with superintendent-level responsibilities Strong knowledge of electrical systems, installation methods, and job site coordination Ability to read and interpret blueprints, schematics, and construction documents Excellent leadership, communication, and problem-solving skills Proficiency with Microsoft Office and project management tools Strong organizational and time-management abilities Ability to manage multiple priorities in fast-paced environments Willingness to work flexible hours, including evenings and weekends as needed Working Conditions Active construction site environment Frequent standing, walking, bending, and lifting Conditions vary depending on project phase and site requirements Compensation & Benefits $57/hour (competitive pay) Medical and dental insurance Paid time off (PTO) 401(k) retirement plan Tuition reimbursement opportunities Job Type Full-Time On-Site (Baltimore, MD) Company Description Talent Corps is an equal opportunity employer. We value diversity and encourage applicants from all backgrounds, including veterans and individuals with disabilities, to apply. Company Description Talent Corps is an equal opportunity employer. We value diversity and encourage applicants from all backgrounds, including veterans and individuals with disabilities, to apply.
Work Where You Matter At Dollar General, our mission is Serving Others! We value each and every one of our employees. Whether you are looking to launch a new career in one of our many convenient Store locations, Distribution Centers, Store Support Center or with our Private Fleet Team, we are proud to provide a wide range of career opportunities. We are not just a retail company; we are a company that values the unique strengths and perspectives that each individual brings. Your difference truly makes a difference at Dollar General. How would you like to Serve? Join the Dollar General Journey and see how your career can thrive. Company Overview Dollar General Corporation has been delivering value to shoppers for more than 80 years. Dollar General helps shoppers Save time. Save money. Every day. by offering products that are frequently used and replenished, such as food, snacks, health and beauty aids, cleaning supplies, basic apparel, housewares and seasonal items at everyday low prices in convenient neighborhood locations. Learn more about Dollar General at Job Details GENERAL SUMMARY: Plan and lead the activities of all stores within the assigned area of operation, including full profit and loss responsibility, while acting within the scope of company objectives and policies to accomplish divisional and regional goals. DUTIES and ESSENTIAL JOB FUNCTIONS: Lead store teams by ensuring: A culture that fosters Dollar General's mission and values. Fair administration of human resources policies & practices. Superior customer service through fun, friendly stores. Area annual sales growth that meets or exceeds company targets through quality orders and efficient flow processes. All tools are effectively utilized in each store and market resulting in superior inventory presentation and management. Effective planning & execution of company objectives. Maximization of performance & productivity through a commitment to sensible store scheduling. Total development of human capital through proactive recruitment, selection and education of employees and customers. Protection of company assets through loss prevention and expense efficiencies. Identify and develop new business opportunities within operational area (i.e., distribution flow improvements, merchandising display efforts, store growth and real estate site selection, recruiting strategy, training and development priorities, employee Relations, customer service, systems implementation, etc.). Consistent and effective communication of divisional and regional priorities to store teams. Qualifications KNOWLEDGE and SKILLS: Demonstrated results-oriented leadership including the ability to model total development and serve as a steward of Dollar General's mission and values. Demonstrated record of achieving performance goals and objectives. Financial analysis skills sufficient to interpret operating statements and other financial reporting data, manage budgets, and control inventory. Demonstrated ability to produce desired results by leveraging resources, maintaining tough expense control, managing merchandise effectively, and defining and communicating clear expectations. Demonstrated ability to manage multiple tasks in a fast-paced environment while demonstrating flexibility and adaptability. Demonstrated strong interpersonal and leadership skills including a willingness to consistently provide superior customer service, the ability to react appropriately under pressure, and the ability to apply good judgment in ambiguous situations. Demonstrated ability to effectively work in collaboration with team to achieve objectives in a participative management style. WORK EXPERIENCE and/or EDUCATION: Four+ years retail management experience with progressively more responsibility, managing multi-unit operations in retail, grocery or convenience store operations with full P&L responsibility. Bachelor's degree preferred. "Big-box" retail management and/or equivalent education and experience combination will be considered. COMPETENCIES: Drives results by identifying opportunities to improve performance. Works efficiently by planning and organizing work to achieve goals and objectives. Focuses on customers by anticipating customer need, overcoming obstacles, and continually striving to improve customer satisfaction. Applies effective analytical skills by integrating complex information, while balancing tactical and strategic initiatives. Provides effective leadership by maintaining an environment that promotes teamwork and maximizes individual potential. Communicates effectively by providing clear and timely communication and demonstrating effective listening skills. Demonstrates adaptability by adjusting to changing business priorities. Note: This position requires weekly travel in a company-provided vehicle with limited overnight stays; a current driver's license and acceptable driving history is required. #
06/20/2026
Full time
Work Where You Matter At Dollar General, our mission is Serving Others! We value each and every one of our employees. Whether you are looking to launch a new career in one of our many convenient Store locations, Distribution Centers, Store Support Center or with our Private Fleet Team, we are proud to provide a wide range of career opportunities. We are not just a retail company; we are a company that values the unique strengths and perspectives that each individual brings. Your difference truly makes a difference at Dollar General. How would you like to Serve? Join the Dollar General Journey and see how your career can thrive. Company Overview Dollar General Corporation has been delivering value to shoppers for more than 80 years. Dollar General helps shoppers Save time. Save money. Every day. by offering products that are frequently used and replenished, such as food, snacks, health and beauty aids, cleaning supplies, basic apparel, housewares and seasonal items at everyday low prices in convenient neighborhood locations. Learn more about Dollar General at Job Details GENERAL SUMMARY: Plan and lead the activities of all stores within the assigned area of operation, including full profit and loss responsibility, while acting within the scope of company objectives and policies to accomplish divisional and regional goals. DUTIES and ESSENTIAL JOB FUNCTIONS: Lead store teams by ensuring: A culture that fosters Dollar General's mission and values. Fair administration of human resources policies & practices. Superior customer service through fun, friendly stores. Area annual sales growth that meets or exceeds company targets through quality orders and efficient flow processes. All tools are effectively utilized in each store and market resulting in superior inventory presentation and management. Effective planning & execution of company objectives. Maximization of performance & productivity through a commitment to sensible store scheduling. Total development of human capital through proactive recruitment, selection and education of employees and customers. Protection of company assets through loss prevention and expense efficiencies. Identify and develop new business opportunities within operational area (i.e., distribution flow improvements, merchandising display efforts, store growth and real estate site selection, recruiting strategy, training and development priorities, employee Relations, customer service, systems implementation, etc.). Consistent and effective communication of divisional and regional priorities to store teams. Qualifications KNOWLEDGE and SKILLS: Demonstrated results-oriented leadership including the ability to model total development and serve as a steward of Dollar General's mission and values. Demonstrated record of achieving performance goals and objectives. Financial analysis skills sufficient to interpret operating statements and other financial reporting data, manage budgets, and control inventory. Demonstrated ability to produce desired results by leveraging resources, maintaining tough expense control, managing merchandise effectively, and defining and communicating clear expectations. Demonstrated ability to manage multiple tasks in a fast-paced environment while demonstrating flexibility and adaptability. Demonstrated strong interpersonal and leadership skills including a willingness to consistently provide superior customer service, the ability to react appropriately under pressure, and the ability to apply good judgment in ambiguous situations. Demonstrated ability to effectively work in collaboration with team to achieve objectives in a participative management style. WORK EXPERIENCE and/or EDUCATION: Four+ years retail management experience with progressively more responsibility, managing multi-unit operations in retail, grocery or convenience store operations with full P&L responsibility. Bachelor's degree preferred. "Big-box" retail management and/or equivalent education and experience combination will be considered. COMPETENCIES: Drives results by identifying opportunities to improve performance. Works efficiently by planning and organizing work to achieve goals and objectives. Focuses on customers by anticipating customer need, overcoming obstacles, and continually striving to improve customer satisfaction. Applies effective analytical skills by integrating complex information, while balancing tactical and strategic initiatives. Provides effective leadership by maintaining an environment that promotes teamwork and maximizes individual potential. Communicates effectively by providing clear and timely communication and demonstrating effective listening skills. Demonstrates adaptability by adjusting to changing business priorities. Note: This position requires weekly travel in a company-provided vehicle with limited overnight stays; a current driver's license and acceptable driving history is required. #
General Cardiology in Miami-Dade, FL 100% Outpatient No Call, No Weekends Miami-Dade has a 100% outpatient General Cardiology opening that operates differently than most. It's a senior-focused, value-based model with no hospital call, no procedural demands, and a care team structure built around prevention and meaningful patient relationships. Practice Overview 100% outpatient General Cardiology: no interventional work, no inpatient rounding, no cath lab, no STEMI call Balanced schedule of 15 to 20 patients per day with longer visit times and smaller panels (avg. 345 patients, capped 450) Collaborate closely with PCPs, care managers, and health coaches in a prevention-first model Read stress tests and interpret Holter monitors; serve as a clinical resource and educator within the care team Schedule Monday through Friday, predictable clinic schedule No call and no weekends 100% consults and follow-ups in an outpatient setting Dedicated exam rooms within a multi-use clinic environment Compensation & Benefits $400,000 to $450,000 base salary Up to 10% annual quality bonus based on quality metrics with no RVUs or production quotas Signing bonus and relocation assistance 33 days PTO plus holidays, $3,500 CME allowance with 5 CME days, 401(k) with up to 6% match, full medical, dental, and vision, and malpractice coverage Candidate Requirements Board Certified or Board Eligible in Cardiology Fellowship-trained General Cardiologist Comfortable in an outpatient-only, senior-focused model Ability to read stress tests and interpret Holter monitors; experience preferred Community & Location Highlights Miami-Dade puts you within reach of beaches, waterfront living, and year-round sunshine. A wide range of housing options spans urban high-rises to quieter suburban neighborhoods, and Miami International Airport makes travel easy from almost anywhere. Florida's lack of a state income tax adds meaningful value to an already strong compensation package. Miami-Dade, no call, and a practice model built around quality over volume. Apply today and see if this is the right fit.
06/20/2026
Full time
General Cardiology in Miami-Dade, FL 100% Outpatient No Call, No Weekends Miami-Dade has a 100% outpatient General Cardiology opening that operates differently than most. It's a senior-focused, value-based model with no hospital call, no procedural demands, and a care team structure built around prevention and meaningful patient relationships. Practice Overview 100% outpatient General Cardiology: no interventional work, no inpatient rounding, no cath lab, no STEMI call Balanced schedule of 15 to 20 patients per day with longer visit times and smaller panels (avg. 345 patients, capped 450) Collaborate closely with PCPs, care managers, and health coaches in a prevention-first model Read stress tests and interpret Holter monitors; serve as a clinical resource and educator within the care team Schedule Monday through Friday, predictable clinic schedule No call and no weekends 100% consults and follow-ups in an outpatient setting Dedicated exam rooms within a multi-use clinic environment Compensation & Benefits $400,000 to $450,000 base salary Up to 10% annual quality bonus based on quality metrics with no RVUs or production quotas Signing bonus and relocation assistance 33 days PTO plus holidays, $3,500 CME allowance with 5 CME days, 401(k) with up to 6% match, full medical, dental, and vision, and malpractice coverage Candidate Requirements Board Certified or Board Eligible in Cardiology Fellowship-trained General Cardiologist Comfortable in an outpatient-only, senior-focused model Ability to read stress tests and interpret Holter monitors; experience preferred Community & Location Highlights Miami-Dade puts you within reach of beaches, waterfront living, and year-round sunshine. A wide range of housing options spans urban high-rises to quieter suburban neighborhoods, and Miami International Airport makes travel easy from almost anywhere. Florida's lack of a state income tax adds meaningful value to an already strong compensation package. Miami-Dade, no call, and a practice model built around quality over volume. Apply today and see if this is the right fit.
Role Overview: Sodexo is seeking a General Manager 3 to lead food services for Southwest Community Schools in Sullivan, Indiana. This role is ideal for a leader who is passionate about K 12 dining and motivated by making a meaningful daily impact on students, staff, and the broader school community. As the GM, you will oversee all aspects of the food service program while shaping a positive and engaging dining experience across the district. You'll lead and develop on site teams, strengthen client and school partnerships, and ensure programs consistently deliver quality, efficiency, and innovation. Beyond day to day operations, this role offers the opportunity to drive continuous improvement, elevate service standards, and build a culture of pride and accountability. At Sodexo, we deliver food, nutrition, environmental and facilities management solutions to partnered K-12 schools. Joining us at one of our school sites means fostering healthy learning environments and positively influencing the students' well-being and performance. Incentives: Annual incentive eligible What You'll Do: have exceptional client service mentality and executive presence support a diverse and inclusive workforce develop exceptional client relations and ensure the campus food service program goals align with client needs achieve company and client financial targets and goals integrate fully within our client's organization and be a trusted advisor with a customer service focus create a positive work environment What We Offer: Compensation is fair and equitable, partially determined by a candidate's education level or years of relevant experience. Salary offers are based on a candidate's specific criteria, like experience, skills, education, and training. Sodexo offers a comprehensive benefits package that may include: Medical, Dental, Vision Care and Wellness Programs 401(k) Plan with Matching Contributions Paid Time Off and Company Holidays Career Growth Opportunities and Tuition Reimbursement More extensive information is provided to new employees upon hire. What You Bring: ability to direct other leaders in a high-volume business have strong financial acumen and P&L background experience driving employee engagement and student satisfaction through strong leadership skills knowledge of client contracts and ability to ensure compliance can manage multiple priorities, demonstrate professional communication skills, and a passion for a high level of customer service Who We Are: At Sodexo, our purpose is to create a better everyday for everyone and build a better life for all. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate. Sodexo partners with clients to provide a truly memorable experience for both customers and employees alike. We do this by providing food service, catering, facilities management, and other integrated solutions worldwide. Our company values you for you; you will be treated fairly and with respect, and you can be yourself. You will have your ideas count and your opinions heard because we can be a stronger team when you're happy at work. This is why we embrace diversity and inclusion as core values, fostering an environment where all employees are valued and respected. We are committed to providing equal employment opportunities to individuals regardless of race, color, religion, national origin, age, sex, gender identity, pregnancy, disability, sexual orientation, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you need assistance with the application process, please complete this form . Qualifications & Requirements: Minimum Education Requirement - High School Diploma or GED Minimum Management Experience - 3 years Minimum Functional Experience - 4 years of relevant experience in school nutrition programs
06/20/2026
Full time
Role Overview: Sodexo is seeking a General Manager 3 to lead food services for Southwest Community Schools in Sullivan, Indiana. This role is ideal for a leader who is passionate about K 12 dining and motivated by making a meaningful daily impact on students, staff, and the broader school community. As the GM, you will oversee all aspects of the food service program while shaping a positive and engaging dining experience across the district. You'll lead and develop on site teams, strengthen client and school partnerships, and ensure programs consistently deliver quality, efficiency, and innovation. Beyond day to day operations, this role offers the opportunity to drive continuous improvement, elevate service standards, and build a culture of pride and accountability. At Sodexo, we deliver food, nutrition, environmental and facilities management solutions to partnered K-12 schools. Joining us at one of our school sites means fostering healthy learning environments and positively influencing the students' well-being and performance. Incentives: Annual incentive eligible What You'll Do: have exceptional client service mentality and executive presence support a diverse and inclusive workforce develop exceptional client relations and ensure the campus food service program goals align with client needs achieve company and client financial targets and goals integrate fully within our client's organization and be a trusted advisor with a customer service focus create a positive work environment What We Offer: Compensation is fair and equitable, partially determined by a candidate's education level or years of relevant experience. Salary offers are based on a candidate's specific criteria, like experience, skills, education, and training. Sodexo offers a comprehensive benefits package that may include: Medical, Dental, Vision Care and Wellness Programs 401(k) Plan with Matching Contributions Paid Time Off and Company Holidays Career Growth Opportunities and Tuition Reimbursement More extensive information is provided to new employees upon hire. What You Bring: ability to direct other leaders in a high-volume business have strong financial acumen and P&L background experience driving employee engagement and student satisfaction through strong leadership skills knowledge of client contracts and ability to ensure compliance can manage multiple priorities, demonstrate professional communication skills, and a passion for a high level of customer service Who We Are: At Sodexo, our purpose is to create a better everyday for everyone and build a better life for all. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate. Sodexo partners with clients to provide a truly memorable experience for both customers and employees alike. We do this by providing food service, catering, facilities management, and other integrated solutions worldwide. Our company values you for you; you will be treated fairly and with respect, and you can be yourself. You will have your ideas count and your opinions heard because we can be a stronger team when you're happy at work. This is why we embrace diversity and inclusion as core values, fostering an environment where all employees are valued and respected. We are committed to providing equal employment opportunities to individuals regardless of race, color, religion, national origin, age, sex, gender identity, pregnancy, disability, sexual orientation, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you need assistance with the application process, please complete this form . Qualifications & Requirements: Minimum Education Requirement - High School Diploma or GED Minimum Management Experience - 3 years Minimum Functional Experience - 4 years of relevant experience in school nutrition programs
Institute Of International Education
Washington, Washington DC
Job Description: The Institute of International Education (IIE) is hiring an Outreach & recruitment Project Manager for the Boren Awards funded by the Defense Language and National Security Education Office (DLNSEO). We invite you to join a team united by our mission to help people and organizations forge brighter futures through educational exchange and lifelong learning. Working at IIE is more than just a job; it's a chance to make an impact. To collaborate with a passionate team, grow your skills, and contribute to programs that change lives around the world. Learn more about IIE and our culture here . If you are a job seeker in need of an accommodation to navigate our careers site or apply for one of our jobs, please click here to learn more. Job Summary The Boren Awards Outreach & Recruitment Project Manager is a key member of the Boren Awards team, working closely with team members to promote and support this unique program for US undergraduate and graduate students interested in languages and regions of the world that are critical to US national security, and who are committed to public service. The Outreach and Recruitment Project Manager, Boren Awards is a highly visible role, serving as the first point of contact for potential applicants, Boren campus representatives and other stakeholders. The Outreach and Recruitment Project Manager, Boren Awards conducts outreach and recruitment activities, and also represents IIE on panels, presentations and other events. They also support coordination of key in-person events for the Boren Awards including the pre-program orientation for approximately 300 students and an employment seminar attended by returned students, federal hiring officials, alumni and DLNSEO leadership. Essential Functions Serves as main point of contact for Boren campus representatives, university partners, and potential applicants. Develops, maintains, and supports key contacts at partner institutions, especially Boren Campus Representatives. Interacts with institutions of higher education, scholarly associations and, as needed, other external constituencies, including vendors, consultants, and contractors, to professionally represent IIE. Recruits and serves as direct point of contact for potential applicants interested in a variety of programs. Supports logistics of key events for the Boren Awards including sourcing vendors, managing procurement, arranging travel for participants, and developing materials for the events. Works on social media and digital outreach for the program Plans and implements outreach programming in collaboration with the Boren team and other IIE programs and university partners as applicable. Tracks, monitors, and supports production and distribution of outreach materials and information. Ensures correct brand usage in creation of all materials. Qualifications and Experience Education and Work Experience Requires a Bachelor's degree and at least two years of related work experience, or combination education and experience. Required Knowledge, Skills and Abilities This government contract requires U.S. citizenship and ability to obtain a Tier-1 (T1) Position of Trust for unclassified access security clearance. Strong understanding of scholarship and fellowship advising on college campuses as well as study abroad or language and culture programming for outbound US students. Experience in an outreach and recruitment role, ability to demonstrate judgement and be comfortable in a public-facing role. Demonstrated project management, time management, and administrative skills with strong attention to detail. Excellent interpersonal, communication, public speaking, and presentation skills. Superior writing and editing skills. Ability to interact with all levels of team members and clients, including the ability to work with students, partner organizations, and institutions. Ability to exercise discretion on confidential matters. Broad knowledge of Microsoft Office programs and social media platforms. Ability to travel domestically and internationally with an active and valid driver's license. Salary and Benefits Hiring Range: $65,155 - $72,712. A candidate's starting salary is determined by various factors including, but not limited to, relevant work experience, job-related knowledge, skills, abilities, internal organizational equity, and geographic region. IIE offers a robust suite of benefits to team members including medical, dental, and vision plans, paid time off and holidays, student loan, tuition and professional development reimbursement programs, retirement plans and a family medical leave benefits. Please visit our careers page for further details. The Institute of International Education (IIE) offers a flexible hybrid work environment which leverages both office work and telework. Work Conditions & Physical Demands: Essential functions are performed in a general office setting with low noise. Job demands may require long periods of sitting; telephone work and/or computer work, as well as interactions with other team members and external stakeholders. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. IIE is committed to offering a respectful work environment free from discrimination and harassment. We are committed to employing and promoting individuals based on their merits, regardless of race, color, religion, sex, national origin, age, disability, veteran status, pregnancy, sexual orientation, gender identity or expression, marital status, citizen status, status with regards to public assistance or any other protected classification. Compensation details: 2 Yearly Salary PI9543f00ec71e-7261
06/20/2026
Full time
Job Description: The Institute of International Education (IIE) is hiring an Outreach & recruitment Project Manager for the Boren Awards funded by the Defense Language and National Security Education Office (DLNSEO). We invite you to join a team united by our mission to help people and organizations forge brighter futures through educational exchange and lifelong learning. Working at IIE is more than just a job; it's a chance to make an impact. To collaborate with a passionate team, grow your skills, and contribute to programs that change lives around the world. Learn more about IIE and our culture here . If you are a job seeker in need of an accommodation to navigate our careers site or apply for one of our jobs, please click here to learn more. Job Summary The Boren Awards Outreach & Recruitment Project Manager is a key member of the Boren Awards team, working closely with team members to promote and support this unique program for US undergraduate and graduate students interested in languages and regions of the world that are critical to US national security, and who are committed to public service. The Outreach and Recruitment Project Manager, Boren Awards is a highly visible role, serving as the first point of contact for potential applicants, Boren campus representatives and other stakeholders. The Outreach and Recruitment Project Manager, Boren Awards conducts outreach and recruitment activities, and also represents IIE on panels, presentations and other events. They also support coordination of key in-person events for the Boren Awards including the pre-program orientation for approximately 300 students and an employment seminar attended by returned students, federal hiring officials, alumni and DLNSEO leadership. Essential Functions Serves as main point of contact for Boren campus representatives, university partners, and potential applicants. Develops, maintains, and supports key contacts at partner institutions, especially Boren Campus Representatives. Interacts with institutions of higher education, scholarly associations and, as needed, other external constituencies, including vendors, consultants, and contractors, to professionally represent IIE. Recruits and serves as direct point of contact for potential applicants interested in a variety of programs. Supports logistics of key events for the Boren Awards including sourcing vendors, managing procurement, arranging travel for participants, and developing materials for the events. Works on social media and digital outreach for the program Plans and implements outreach programming in collaboration with the Boren team and other IIE programs and university partners as applicable. Tracks, monitors, and supports production and distribution of outreach materials and information. Ensures correct brand usage in creation of all materials. Qualifications and Experience Education and Work Experience Requires a Bachelor's degree and at least two years of related work experience, or combination education and experience. Required Knowledge, Skills and Abilities This government contract requires U.S. citizenship and ability to obtain a Tier-1 (T1) Position of Trust for unclassified access security clearance. Strong understanding of scholarship and fellowship advising on college campuses as well as study abroad or language and culture programming for outbound US students. Experience in an outreach and recruitment role, ability to demonstrate judgement and be comfortable in a public-facing role. Demonstrated project management, time management, and administrative skills with strong attention to detail. Excellent interpersonal, communication, public speaking, and presentation skills. Superior writing and editing skills. Ability to interact with all levels of team members and clients, including the ability to work with students, partner organizations, and institutions. Ability to exercise discretion on confidential matters. Broad knowledge of Microsoft Office programs and social media platforms. Ability to travel domestically and internationally with an active and valid driver's license. Salary and Benefits Hiring Range: $65,155 - $72,712. A candidate's starting salary is determined by various factors including, but not limited to, relevant work experience, job-related knowledge, skills, abilities, internal organizational equity, and geographic region. IIE offers a robust suite of benefits to team members including medical, dental, and vision plans, paid time off and holidays, student loan, tuition and professional development reimbursement programs, retirement plans and a family medical leave benefits. Please visit our careers page for further details. The Institute of International Education (IIE) offers a flexible hybrid work environment which leverages both office work and telework. Work Conditions & Physical Demands: Essential functions are performed in a general office setting with low noise. Job demands may require long periods of sitting; telephone work and/or computer work, as well as interactions with other team members and external stakeholders. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. IIE is committed to offering a respectful work environment free from discrimination and harassment. We are committed to employing and promoting individuals based on their merits, regardless of race, color, religion, sex, national origin, age, disability, veteran status, pregnancy, sexual orientation, gender identity or expression, marital status, citizen status, status with regards to public assistance or any other protected classification. Compensation details: 2 Yearly Salary PI9543f00ec71e-7261
What began as an idea between two brothers to open a Mexican restaurant has since grown into one of the largest, privately held Taco Bell franchisees in America. At Border Foods, we work with a people-first mantra. From cooks to cashiers to restaurant managers and beyond, we work together to bring to life the Core Values of Border Foods. Welcome to our family where you will continue to learn, evolve, and shape what comes next on our mission of making lives better. As a Shift Leader your mission is to reinforce the Border Foods CORE values, to include Accountability, Integrity, Family, Excellence, Teamwork, and Empowerment. At Border Foods, we will unlock the full potential of our employees and guest's restaurant experience by creating safe welcoming and supportive environments where everyone can thrive. The purpose of the Shift Leader is to make the lives of the employees and the guests better by creating opportunities to positively impact life experiences. You are responsible for the operation of the entire restaurant and building a strong team that consistently provides customers great food and a friendly experience. Shift Leader Core Values: Accountability & Integrity: - Consistently demonstrates integrity in actions and expectations - Guides team members, ensuring they complete all assigned duties and serve safe, quality food in a friendly manner - Scheduling and deploying the Team correctly - Monitors the performance of each Team Member and hold them accountable for standards and expectations. - Ensures a quality customer experience by driving fast and friendly service - Maintains point of sale system by reporting all system failures and verifies download accuracy (e.g. pricing updates, menu changes). - Ensure health and safety standards are met - Adheres to all local, state, and federal laws and guidelines. Family & Teamwork: - Creates unity in the team by building cross functional relationships - Respond to Team Member questions and resolves employee issues in a timely manner. - Provide a restaurant that is a safe place for team members to work and customers to visit - Able to navigate challenging situations and provide appropriate guidance - Motivates and supports the team through active listening and the ability to communicate to a wide variety of audiences - Represents Border Foods in handling customer complaints and/or issues; demonstrating a sincere approach and desire to find an effective solution. - Instills a recognition culture that creates a positive work environment Excellence: - Strategic planner creates short term and long-term strategies for restaurant success - Delivers profit by utilizing and interpreting the P&L in order to make the appropriate financial adjustments - Sourcing, hiring, and developing excellent Team Members - Conducting New Hire orientation and developing the training plan for each new hire - Minimizes loss through strict observance of cash handling policies, proper training of Team Members, and complying with all accounting/banking requirements. Empowerment: - Provides learning and development opportunities for all Team Members. - Consistently demonstrates active and timely coaching capabilities. - Seeks and shares ideas to help others succeed Required or Preferred Experience: - Must be at least 18 years of age. - High school diploma or equivalent. Physical Demands: The physical demands for this position are sits, stands, bends, lifts, and moves intermittently during working hours. These physical requirements may be accomplished with or without reasonable accommodation. The duties of this position may change from time to time. Border Foods reserves the right to add or delete duties and responsibilities at the discretion of Border Foods or its managers. This job description is intended to describe the general level of work being performed. It is not intended to be all-inclusive. Border Foods is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and individuals with Disabilities and does not discriminate based on gender identity or sexual orientation. "You are applying for work with a franchisee of Taco Bell, not Taco Bell Corp. or any of its affiliates. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own wage and benefit programs that can vary among franchisees." $12 per hour - $24 per hour
06/20/2026
Full time
What began as an idea between two brothers to open a Mexican restaurant has since grown into one of the largest, privately held Taco Bell franchisees in America. At Border Foods, we work with a people-first mantra. From cooks to cashiers to restaurant managers and beyond, we work together to bring to life the Core Values of Border Foods. Welcome to our family where you will continue to learn, evolve, and shape what comes next on our mission of making lives better. As a Shift Leader your mission is to reinforce the Border Foods CORE values, to include Accountability, Integrity, Family, Excellence, Teamwork, and Empowerment. At Border Foods, we will unlock the full potential of our employees and guest's restaurant experience by creating safe welcoming and supportive environments where everyone can thrive. The purpose of the Shift Leader is to make the lives of the employees and the guests better by creating opportunities to positively impact life experiences. You are responsible for the operation of the entire restaurant and building a strong team that consistently provides customers great food and a friendly experience. Shift Leader Core Values: Accountability & Integrity: - Consistently demonstrates integrity in actions and expectations - Guides team members, ensuring they complete all assigned duties and serve safe, quality food in a friendly manner - Scheduling and deploying the Team correctly - Monitors the performance of each Team Member and hold them accountable for standards and expectations. - Ensures a quality customer experience by driving fast and friendly service - Maintains point of sale system by reporting all system failures and verifies download accuracy (e.g. pricing updates, menu changes). - Ensure health and safety standards are met - Adheres to all local, state, and federal laws and guidelines. Family & Teamwork: - Creates unity in the team by building cross functional relationships - Respond to Team Member questions and resolves employee issues in a timely manner. - Provide a restaurant that is a safe place for team members to work and customers to visit - Able to navigate challenging situations and provide appropriate guidance - Motivates and supports the team through active listening and the ability to communicate to a wide variety of audiences - Represents Border Foods in handling customer complaints and/or issues; demonstrating a sincere approach and desire to find an effective solution. - Instills a recognition culture that creates a positive work environment Excellence: - Strategic planner creates short term and long-term strategies for restaurant success - Delivers profit by utilizing and interpreting the P&L in order to make the appropriate financial adjustments - Sourcing, hiring, and developing excellent Team Members - Conducting New Hire orientation and developing the training plan for each new hire - Minimizes loss through strict observance of cash handling policies, proper training of Team Members, and complying with all accounting/banking requirements. Empowerment: - Provides learning and development opportunities for all Team Members. - Consistently demonstrates active and timely coaching capabilities. - Seeks and shares ideas to help others succeed Required or Preferred Experience: - Must be at least 18 years of age. - High school diploma or equivalent. Physical Demands: The physical demands for this position are sits, stands, bends, lifts, and moves intermittently during working hours. These physical requirements may be accomplished with or without reasonable accommodation. The duties of this position may change from time to time. Border Foods reserves the right to add or delete duties and responsibilities at the discretion of Border Foods or its managers. This job description is intended to describe the general level of work being performed. It is not intended to be all-inclusive. Border Foods is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and individuals with Disabilities and does not discriminate based on gender identity or sexual orientation. "You are applying for work with a franchisee of Taco Bell, not Taco Bell Corp. or any of its affiliates. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own wage and benefit programs that can vary among franchisees." $12 per hour - $24 per hour
Capital Waste Services LLC
Columbia, South Carolina
Description: CWS is a leading provider of waste management services throughout South Carolina, Tennessee, Georgia, Virginia, and Florida areas. We are committed to providing superior customer service with our emphasis on integrity, reliability and cleanliness. We invest in our community, our customers and our employees by providing access to state-of-the-art systems and processes, and the best leadership in the business! The HQ Relief Driver provides operational support across multiple locations by filling in for driver vacancies. This role requires extensive travel to various sites and flexibility to adapt to different routes and operational needs. Capital Waste Services offers GREAT hours with full time pay and benefits for CDL Drivers. Pay based on Experience. CDL Driver Qualifications CDL Drivers with a Class "B or A" CDL Prefer at least 2 years of driving experience in the garbage truck industry with rear load, ASL, roll off, or front end safe driving record and will be verified through the Department of Motor Vehicles current and in compliance with all D.O.T. requirements Valid Medical Certification Be dependable, reliable and trustworthy Be able to pass a drug test and background check Job Type: Full-time Responsibilities Operate CDL or Non-CDL vehicles to transport waste and recycling materials according to company standards. Cover routes for absent drivers across multiple regions , ensuring timely and safe service. Comply with DOT regulations and company safety policies at all times. Perform pre-trip and post-trip inspections and report any maintenance issues. Communicate effectively with dispatch and local site managers to ensure smooth operations. Maintain accurate logs and documentation as required by DOT and company policy. Operate various types of trucks, including Front-End Load, Roll-Off, Rear-Load, or Automated Side-Load (ASL) , to collect and transport waste materials. Ensure the safe loading and unloading of materials while adhering to all safety regulations. Conduct routine vehicle inspections and perform minor mechanical maintenance as needed. Maintain accurate records of deliveries and communicate effectively with team members and supervisors. Provide excellent customer service during interactions with the public. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Disability insurance Health insurance Life insurance Paid time off Vision insurance Schedule: Monday to Friday Weekends as needed Requirements Ability to travel 100% of the time , including overnight stays. Strong adaptability to different routes and operational environments. Valid CDL A or B (Required) - Has held for at least 2 Years Minimum two (2) years of CDL driving experience . Medical Card (Preferred) Minimum 21 years of age Driving record in good standing Must pass background checks and drug screening per company and DOT standards. Requirements: Education, Training, Experience and Licensing/Certification Requirements : Previous experience with Front-End Load, Roll-Off, Rear-Load, Automated Side-Load (ASL) (Preferred) High school diploma or general education degree (GED) (desired) Possess valid Class A or B Commercial Driver's License (CDL) Prior waste industry driving experience (Preferred) Two (2) years of satisfactory driving experience of Class A or B vehicles (Required) Satisfactory MVR (Motor Vehicle Driving Record) Must pass a DOT physical, drug screen and criminal background check PId0626c8f84b7-3023
06/20/2026
Full time
Description: CWS is a leading provider of waste management services throughout South Carolina, Tennessee, Georgia, Virginia, and Florida areas. We are committed to providing superior customer service with our emphasis on integrity, reliability and cleanliness. We invest in our community, our customers and our employees by providing access to state-of-the-art systems and processes, and the best leadership in the business! The HQ Relief Driver provides operational support across multiple locations by filling in for driver vacancies. This role requires extensive travel to various sites and flexibility to adapt to different routes and operational needs. Capital Waste Services offers GREAT hours with full time pay and benefits for CDL Drivers. Pay based on Experience. CDL Driver Qualifications CDL Drivers with a Class "B or A" CDL Prefer at least 2 years of driving experience in the garbage truck industry with rear load, ASL, roll off, or front end safe driving record and will be verified through the Department of Motor Vehicles current and in compliance with all D.O.T. requirements Valid Medical Certification Be dependable, reliable and trustworthy Be able to pass a drug test and background check Job Type: Full-time Responsibilities Operate CDL or Non-CDL vehicles to transport waste and recycling materials according to company standards. Cover routes for absent drivers across multiple regions , ensuring timely and safe service. Comply with DOT regulations and company safety policies at all times. Perform pre-trip and post-trip inspections and report any maintenance issues. Communicate effectively with dispatch and local site managers to ensure smooth operations. Maintain accurate logs and documentation as required by DOT and company policy. Operate various types of trucks, including Front-End Load, Roll-Off, Rear-Load, or Automated Side-Load (ASL) , to collect and transport waste materials. Ensure the safe loading and unloading of materials while adhering to all safety regulations. Conduct routine vehicle inspections and perform minor mechanical maintenance as needed. Maintain accurate records of deliveries and communicate effectively with team members and supervisors. Provide excellent customer service during interactions with the public. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Disability insurance Health insurance Life insurance Paid time off Vision insurance Schedule: Monday to Friday Weekends as needed Requirements Ability to travel 100% of the time , including overnight stays. Strong adaptability to different routes and operational environments. Valid CDL A or B (Required) - Has held for at least 2 Years Minimum two (2) years of CDL driving experience . Medical Card (Preferred) Minimum 21 years of age Driving record in good standing Must pass background checks and drug screening per company and DOT standards. Requirements: Education, Training, Experience and Licensing/Certification Requirements : Previous experience with Front-End Load, Roll-Off, Rear-Load, Automated Side-Load (ASL) (Preferred) High school diploma or general education degree (GED) (desired) Possess valid Class A or B Commercial Driver's License (CDL) Prior waste industry driving experience (Preferred) Two (2) years of satisfactory driving experience of Class A or B vehicles (Required) Satisfactory MVR (Motor Vehicle Driving Record) Must pass a DOT physical, drug screen and criminal background check PId0626c8f84b7-3023
Work Where You Matter At Dollar General, our mission is Serving Others! We value each and every one of our employees. Whether you are looking to launch a new career in one of our many convenient Store locations, Distribution Centers, Store Support Center or with our Private Fleet Team, we are proud to provide a wide range of career opportunities. We are not just a retail company; we are a company that values the unique strengths and perspectives that each individual brings. Your difference truly makes a difference at Dollar General. How would you like to Serve? Join the Dollar General Journey and see how your career can thrive. Company Overview Dollar General Corporation has been delivering value to shoppers for more than 80 years. Dollar General helps shoppers Save time. Save money. Every day. by offering products that are frequently used and replenished, such as food, snacks, health and beauty aids, cleaning supplies, basic apparel, housewares and seasonal items at everyday low prices in convenient neighborhood locations. Learn more about Dollar General at Job Details GENERAL SUMMARY: Responsible for the management of all employees in the effective planning and implementation of all store processes, including ordering, receiving, stocking, presentation, selling, staffing and support. DUTIES and ESSENTIAL JOB FUNCTIONS: Recruit, select and retain qualified employees according to federal and state labor laws and company policies; ensure store is properly staffed. Provide proper training for employees; conduct performance evaluations; identify gaps for appropriate solutions and/or counseling, up to and including termination. Make recommendations regarding employee pay rate and advancement. Communicate performance, conduct and safety expectations regularly; coordinate meetings and events to encourage safety, security and policies. Ensure that the store is appropriately staffed and effectively opened and closed each day. Personally open the store a minimum of two times per week; personally close the store a minimum of two times per week. Evaluate operating statements to identify business trends (including sales, profitability, and turn), expense control opportunities, potential shrink, and errors. Order to ensure the meeting or exceeding of in-stock targets; review ordering plan, seasonal direction and inventory management issues on a weekly basis; follow up on Basic Stock Replenishment (BSR)/cycle counts. Facilitate the efficient staging, stocking and storage of merchandise by following defined company work processes. Ensure that all merchandise is presented according to established practices; utilize merchandise fixtures properly including presentation, product pricing and signage. Maintain accurate inventory levels by controlling damages, markdowns, scanning, paperwork, and facility controls. Ensure the financial integrity of the store through strict cashier accountability, key control, and adherence to stated company security practices and cash control procedures. Provide superior customer service leadership. Maintain a clean, well-organized store; facilitate a safe and secure working and shopping environment. Ensure that store is adequately equipped with tools necessary to perform required tasks. Follow company policies and procedures as outlined in the Standard Operating Procedures manual, Employee Handbook, and company communications; ensure employee compliance. Complete all paperwork and documentation according to guidelines and deadlines. Qualifications KNOWLEDGE and SKILLS: Ability to read and interpret documents such as diagrams, safety rules, operating and maintenance instructions, and procedures manuals Ability to perform mathematical calculations such as addition, subtraction, multiplication, division, and percentages. Knowledge of cash handling procedures including cashier accountability and deposit control. Ability to perform IBM cash register functions to generate reports. Knowledge of inventory management and merchandising practices. Effective oral and written communication skills. Effective interpersonal skills. Knowledge of recruiting, interviewing, hiring, counseling and termination practices including legal compliance and internal processes. Knowledge of cash, facility and safety control policies and practices (deposits, store keys, SAFE program, etc.) Good organization skills with attention to detail. Ability to solve problems and deal with a variety of situations where limited standardization exists. Certain store locations may give preference to bilingual Spanish speakers. WORK EXPERIENCE and/or EDUCATION: High school diploma or equivalent strongly preferred. One year of management experience in a retail environment preferred. COMPETENCIES: Aligns motives, values and beliefs with Dollar General values. Supports ownership by tapping into the potential of others. Acts as a liaison between the corporate office and store employees. Fosters cooperation and collaboration. Interacts with staff tactfully yet directly and maintains an open forum of exchange. Demonstrates responsiveness and sensitivity to customer needs. Applies basic principles of retail (i.e., ordering cycles, peak inventories, merchandise flow, etc.). Provides continuous attention to development of staff. Recruits, hires and trains qualified applicants to fulfill a store need. Ensures store compliance to federal labor laws and company policies and procedures. WORKING CONDITIONS and PHYSICAL REQUIREMENTS: Frequent walking and standing. Frequent bending, stooping and kneeling to run check out station, stock merchandise and unload trucks. Frequent handling of merchandise and equipment such as hand-held scanner, pricing guns, box cutters, merchandise containers, two-wheel dollies, and U-boats (six-wheel carts). Frequent and proper lifting of up to 40 pounds; occasional lifting of up to 55 pounds. Occasional climbing (using ladder). Regularly driving/providing own transportation to make bank deposits and occasionally to attend management meetings and to other Dollar General stores. Fast-paced environment; moderate noise level. Occasionally exposed to outside weather conditions. Dollar General Corporation is an equal opportunity employer. #
06/20/2026
Full time
Work Where You Matter At Dollar General, our mission is Serving Others! We value each and every one of our employees. Whether you are looking to launch a new career in one of our many convenient Store locations, Distribution Centers, Store Support Center or with our Private Fleet Team, we are proud to provide a wide range of career opportunities. We are not just a retail company; we are a company that values the unique strengths and perspectives that each individual brings. Your difference truly makes a difference at Dollar General. How would you like to Serve? Join the Dollar General Journey and see how your career can thrive. Company Overview Dollar General Corporation has been delivering value to shoppers for more than 80 years. Dollar General helps shoppers Save time. Save money. Every day. by offering products that are frequently used and replenished, such as food, snacks, health and beauty aids, cleaning supplies, basic apparel, housewares and seasonal items at everyday low prices in convenient neighborhood locations. Learn more about Dollar General at Job Details GENERAL SUMMARY: Responsible for the management of all employees in the effective planning and implementation of all store processes, including ordering, receiving, stocking, presentation, selling, staffing and support. DUTIES and ESSENTIAL JOB FUNCTIONS: Recruit, select and retain qualified employees according to federal and state labor laws and company policies; ensure store is properly staffed. Provide proper training for employees; conduct performance evaluations; identify gaps for appropriate solutions and/or counseling, up to and including termination. Make recommendations regarding employee pay rate and advancement. Communicate performance, conduct and safety expectations regularly; coordinate meetings and events to encourage safety, security and policies. Ensure that the store is appropriately staffed and effectively opened and closed each day. Personally open the store a minimum of two times per week; personally close the store a minimum of two times per week. Evaluate operating statements to identify business trends (including sales, profitability, and turn), expense control opportunities, potential shrink, and errors. Order to ensure the meeting or exceeding of in-stock targets; review ordering plan, seasonal direction and inventory management issues on a weekly basis; follow up on Basic Stock Replenishment (BSR)/cycle counts. Facilitate the efficient staging, stocking and storage of merchandise by following defined company work processes. Ensure that all merchandise is presented according to established practices; utilize merchandise fixtures properly including presentation, product pricing and signage. Maintain accurate inventory levels by controlling damages, markdowns, scanning, paperwork, and facility controls. Ensure the financial integrity of the store through strict cashier accountability, key control, and adherence to stated company security practices and cash control procedures. Provide superior customer service leadership. Maintain a clean, well-organized store; facilitate a safe and secure working and shopping environment. Ensure that store is adequately equipped with tools necessary to perform required tasks. Follow company policies and procedures as outlined in the Standard Operating Procedures manual, Employee Handbook, and company communications; ensure employee compliance. Complete all paperwork and documentation according to guidelines and deadlines. Qualifications KNOWLEDGE and SKILLS: Ability to read and interpret documents such as diagrams, safety rules, operating and maintenance instructions, and procedures manuals Ability to perform mathematical calculations such as addition, subtraction, multiplication, division, and percentages. Knowledge of cash handling procedures including cashier accountability and deposit control. Ability to perform IBM cash register functions to generate reports. Knowledge of inventory management and merchandising practices. Effective oral and written communication skills. Effective interpersonal skills. Knowledge of recruiting, interviewing, hiring, counseling and termination practices including legal compliance and internal processes. Knowledge of cash, facility and safety control policies and practices (deposits, store keys, SAFE program, etc.) Good organization skills with attention to detail. Ability to solve problems and deal with a variety of situations where limited standardization exists. Certain store locations may give preference to bilingual Spanish speakers. WORK EXPERIENCE and/or EDUCATION: High school diploma or equivalent strongly preferred. One year of management experience in a retail environment preferred. COMPETENCIES: Aligns motives, values and beliefs with Dollar General values. Supports ownership by tapping into the potential of others. Acts as a liaison between the corporate office and store employees. Fosters cooperation and collaboration. Interacts with staff tactfully yet directly and maintains an open forum of exchange. Demonstrates responsiveness and sensitivity to customer needs. Applies basic principles of retail (i.e., ordering cycles, peak inventories, merchandise flow, etc.). Provides continuous attention to development of staff. Recruits, hires and trains qualified applicants to fulfill a store need. Ensures store compliance to federal labor laws and company policies and procedures. WORKING CONDITIONS and PHYSICAL REQUIREMENTS: Frequent walking and standing. Frequent bending, stooping and kneeling to run check out station, stock merchandise and unload trucks. Frequent handling of merchandise and equipment such as hand-held scanner, pricing guns, box cutters, merchandise containers, two-wheel dollies, and U-boats (six-wheel carts). Frequent and proper lifting of up to 40 pounds; occasional lifting of up to 55 pounds. Occasional climbing (using ladder). Regularly driving/providing own transportation to make bank deposits and occasionally to attend management meetings and to other Dollar General stores. Fast-paced environment; moderate noise level. Occasionally exposed to outside weather conditions. Dollar General Corporation is an equal opportunity employer. #
University of New Mexico - Hospitals
Belen, New Mexico
RN INPATIENT - All Progressive Care Units (PCU) - Day & Night Shifts - University of New Mexico Hospital - Albuquerque We have immediate RN hiring across our PCU departments. All shifts available! Part Time & Full Time. Apply and we will have a hiring manager contact you within 48 hours to discuss your interests and placement. Sign-On Bonus Available Relocation Assistance Available Rate based on experience: Minimum $34.84 (RN Inpatient II) to Max: $47.33 (RN Inpatient V) Receive 17% Weekday Nights, 26% Weekend Nights and 15% Weekend Day shift differentials Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. CURRENTLY HIRING: Coronary Care Subacute The Adult Inpatient Admission Unit (PAAU) A fast paced, high throughput unit that serves as both an Observation Unit and a bridge for patients transitioning from the Emergency Department to the Progressive Care Units. Nurses in the PAAU manage diverse patient populations across multiple specialties in a highly collaborative environment. Adult Oncology Serve patients who are receiving chemotherapy, stem cell transplants, radiation and more. We also participate in research measures aimed at preventing and treating cancer diagnoses. We are New Mexico's only NCI designated Comprehensive Cancer Center and one of only 51 in the United States. Family Medicine Inpatient (3-N) Patient population ranges from End Stage Renal Disease, Liver Failure, Mobility Issues, Surgical and more. We also are the secondary unit for Cystic Fibrosis patients. Gen Med/SAC (4-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. General Medicine (5-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Cystic Fibrosis. We also were the primary COVID unit during the height of the pandemic. General Surgery/Transplant (6-S) Care for primarily pre-op and post-op renal transplant patients as well as some patients needing to be treated for transplant rejection. We also care for surgical oncology, hepatobiliary and general surgery patients. Trauma Subacute (4-E) Patient population consists of primarily trauma patients along with specialties such as chronic pain, complex ENT patients, and everything in between. Orthopedics (3-S) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. Surgical Specialty Unit (4-S) Service a wide variety of patient populations being cared by services such as General Surgery, Emergency General Surgery, Urology, Plastics and more. We see a lot of patients with surgical drains, complicated wounds, wound VAC's, chest tubes, indwelling urinary catheters, ostomies and the occasional trach . Neuroscience (5-S) Serve patients who have experienced stroke, seizures, traumatic brain injuries, spinal injuries, multiple sclerosis and more. We have been designated by the American Heart Association/American Stroke Association as a Primary Advanced Stroke Center. JOB SUMMARY Work within the nursing process to provide direct nursing care to assigned patients. Provide clinical leadership for other staff and assume relief charge duties when designated. Serve as a role model to promote a positive work environment and quality patient care. Ensure adherence to Hospitals and departmental policies and procedures. Patient care assignment may include Neonate, Pediatric, Adolescent, Adult and Geriatric age groups. ESSENTIAL FUNCTIONS - Essential and other responsibilities and duties may include but are not limited to the following: PATIENT CARE - Deliver safe direct care to an assigned group of patients as required POLICIES - Work within Hospitals, Nursing division and departmental policies CARE PLAN - Work in collaboration with the healthcare team, implement and document individualized care plans incorporating age specific considerations, including discharge planning and patient/family teaching TESTS AND PROCEDURES - Assist with special tests and procedures, ensure proper consent has been obtained PARTICIPATION - Participate in orientation; upon successful completion of preceptor training assume precepting and evaluation responsibilities of new personnel EMERGENCY MEASURES - Assist with or institute emergency measures for sudden, adverse developments in patients MEDICAL RECORDS - Ensure that patient medical records contain necessary information INQUIRIES - Answer telephones and triage calls as per departmental policy MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings ENVIRONMENT - Maintain a safe, comfortable, and therapeutic environment for patients/families in accordance with Hospitals standards DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MINIMUM QUALIFICATIONS EDUCATION: Nursing program (nationally accredited) graduate CERTIFICATIONS: RN MATRIX - Complete and maintain unit/clinic based required certifications and competencies as listed in the department expectations/and or the unit/clinic education matrix LICENSES/CERTIFICATIONS: Licensed Registered Nurse (RN) in State of New Mexico or as allowed by reciprocal agreement by State of New Mexico CPR Certification for Healthcare/BLS Providers or for Professional Rescuers or must obtain within 30 calendar days of date of position TESTING REQUIREMENTS: Obtain UNMH IV Verification within 6 months of position Tuberculosis testing is completed upon hire and additionally as required PREFERRED QUALIFICATIONS PREFERRED EDUCATION: Bachelor's Degree of Science in Nursing PREFERRED EXPERIENCE: Bilingual English/Spanish Bilingual English/Keres, Tewa, Tiwa, Towa, Zuni, or Navajo PREFERRED LICENSURE/CERTIFICATION: Nationally Certified in area of specialty WORKING CONDITIONS ENVIRONMENTAL CONDITIONS: Sig Hazard: Chemicals, bio hazardous materials requiring extensive safety precautions and may require protective equipment PHYSICAL CONDITIONS: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Department: Registered Nurse
06/20/2026
Full time
RN INPATIENT - All Progressive Care Units (PCU) - Day & Night Shifts - University of New Mexico Hospital - Albuquerque We have immediate RN hiring across our PCU departments. All shifts available! Part Time & Full Time. Apply and we will have a hiring manager contact you within 48 hours to discuss your interests and placement. Sign-On Bonus Available Relocation Assistance Available Rate based on experience: Minimum $34.84 (RN Inpatient II) to Max: $47.33 (RN Inpatient V) Receive 17% Weekday Nights, 26% Weekend Nights and 15% Weekend Day shift differentials Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. CURRENTLY HIRING: Coronary Care Subacute The Adult Inpatient Admission Unit (PAAU) A fast paced, high throughput unit that serves as both an Observation Unit and a bridge for patients transitioning from the Emergency Department to the Progressive Care Units. Nurses in the PAAU manage diverse patient populations across multiple specialties in a highly collaborative environment. Adult Oncology Serve patients who are receiving chemotherapy, stem cell transplants, radiation and more. We also participate in research measures aimed at preventing and treating cancer diagnoses. We are New Mexico's only NCI designated Comprehensive Cancer Center and one of only 51 in the United States. Family Medicine Inpatient (3-N) Patient population ranges from End Stage Renal Disease, Liver Failure, Mobility Issues, Surgical and more. We also are the secondary unit for Cystic Fibrosis patients. Gen Med/SAC (4-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. General Medicine (5-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Cystic Fibrosis. We also were the primary COVID unit during the height of the pandemic. General Surgery/Transplant (6-S) Care for primarily pre-op and post-op renal transplant patients as well as some patients needing to be treated for transplant rejection. We also care for surgical oncology, hepatobiliary and general surgery patients. Trauma Subacute (4-E) Patient population consists of primarily trauma patients along with specialties such as chronic pain, complex ENT patients, and everything in between. Orthopedics (3-S) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. Surgical Specialty Unit (4-S) Service a wide variety of patient populations being cared by services such as General Surgery, Emergency General Surgery, Urology, Plastics and more. We see a lot of patients with surgical drains, complicated wounds, wound VAC's, chest tubes, indwelling urinary catheters, ostomies and the occasional trach . Neuroscience (5-S) Serve patients who have experienced stroke, seizures, traumatic brain injuries, spinal injuries, multiple sclerosis and more. We have been designated by the American Heart Association/American Stroke Association as a Primary Advanced Stroke Center. JOB SUMMARY Work within the nursing process to provide direct nursing care to assigned patients. Provide clinical leadership for other staff and assume relief charge duties when designated. Serve as a role model to promote a positive work environment and quality patient care. Ensure adherence to Hospitals and departmental policies and procedures. Patient care assignment may include Neonate, Pediatric, Adolescent, Adult and Geriatric age groups. ESSENTIAL FUNCTIONS - Essential and other responsibilities and duties may include but are not limited to the following: PATIENT CARE - Deliver safe direct care to an assigned group of patients as required POLICIES - Work within Hospitals, Nursing division and departmental policies CARE PLAN - Work in collaboration with the healthcare team, implement and document individualized care plans incorporating age specific considerations, including discharge planning and patient/family teaching TESTS AND PROCEDURES - Assist with special tests and procedures, ensure proper consent has been obtained PARTICIPATION - Participate in orientation; upon successful completion of preceptor training assume precepting and evaluation responsibilities of new personnel EMERGENCY MEASURES - Assist with or institute emergency measures for sudden, adverse developments in patients MEDICAL RECORDS - Ensure that patient medical records contain necessary information INQUIRIES - Answer telephones and triage calls as per departmental policy MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings ENVIRONMENT - Maintain a safe, comfortable, and therapeutic environment for patients/families in accordance with Hospitals standards DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MINIMUM QUALIFICATIONS EDUCATION: Nursing program (nationally accredited) graduate CERTIFICATIONS: RN MATRIX - Complete and maintain unit/clinic based required certifications and competencies as listed in the department expectations/and or the unit/clinic education matrix LICENSES/CERTIFICATIONS: Licensed Registered Nurse (RN) in State of New Mexico or as allowed by reciprocal agreement by State of New Mexico CPR Certification for Healthcare/BLS Providers or for Professional Rescuers or must obtain within 30 calendar days of date of position TESTING REQUIREMENTS: Obtain UNMH IV Verification within 6 months of position Tuberculosis testing is completed upon hire and additionally as required PREFERRED QUALIFICATIONS PREFERRED EDUCATION: Bachelor's Degree of Science in Nursing PREFERRED EXPERIENCE: Bilingual English/Spanish Bilingual English/Keres, Tewa, Tiwa, Towa, Zuni, or Navajo PREFERRED LICENSURE/CERTIFICATION: Nationally Certified in area of specialty WORKING CONDITIONS ENVIRONMENTAL CONDITIONS: Sig Hazard: Chemicals, bio hazardous materials requiring extensive safety precautions and may require protective equipment PHYSICAL CONDITIONS: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Department: Registered Nurse
Taco Bell - Le Mars is looking for enthusiastic individuals to join our team in Le Mars, IA as full time or part time Shift Leaders. If you like working in a fast paced, fun environment and you are good with people, look no further! Taco Bell - Le Mars is the right place for you. Shift Leader Job Essentials: -Must be able to demonstrate you are committed, hard-working, honest and friendly. -Excellent customer service skills -Reliable transportation to and from work (daily) -Ability to work with computers -Ability to assist the General Manager with team building -Ability to coach and lead a team with no supervision -Ability to maintain a positive atmosphere of teamwork and full of energy -Ability to communicate to all team members -Sales Skills Additional Responsibilities: -Be professional and courteous with all customers -Promptly handle all customer concerns by delighting each of our customers -Willing to open and close stores -Willing to perform and uphold daily cleaning duties -Willing to maintain a safe and organized restaurant for employees and customers We are actively hiring for a full time or part time Shift Leader to join our team. We can't wait to meet you. Apply today!
06/20/2026
Full time
Taco Bell - Le Mars is looking for enthusiastic individuals to join our team in Le Mars, IA as full time or part time Shift Leaders. If you like working in a fast paced, fun environment and you are good with people, look no further! Taco Bell - Le Mars is the right place for you. Shift Leader Job Essentials: -Must be able to demonstrate you are committed, hard-working, honest and friendly. -Excellent customer service skills -Reliable transportation to and from work (daily) -Ability to work with computers -Ability to assist the General Manager with team building -Ability to coach and lead a team with no supervision -Ability to maintain a positive atmosphere of teamwork and full of energy -Ability to communicate to all team members -Sales Skills Additional Responsibilities: -Be professional and courteous with all customers -Promptly handle all customer concerns by delighting each of our customers -Willing to open and close stores -Willing to perform and uphold daily cleaning duties -Willing to maintain a safe and organized restaurant for employees and customers We are actively hiring for a full time or part time Shift Leader to join our team. We can't wait to meet you. Apply today!
Taco Bell - Columbia Ave. is looking for a full time or part time Store Supervisor for our location in Franklin, TN. As a Store Manager, you will assist the General Manager in managing the operations and staff on a day to day basis, including the execution of all company policies, procedures, programs and systems. The store supervisor also ensures compliance with all Federal, State and local laws and ethical business practices. You will be actively involved in the selection, orientation and training of crew members at Taco Bell - Columbia Ave Qualified Store Supervisor candidates will have previous experience in restaurants or managing teams. You should love working with people and be a team leader. This role is full time or part time. We are hiring immediately, so submit your application today!
06/20/2026
Full time
Taco Bell - Columbia Ave. is looking for a full time or part time Store Supervisor for our location in Franklin, TN. As a Store Manager, you will assist the General Manager in managing the operations and staff on a day to day basis, including the execution of all company policies, procedures, programs and systems. The store supervisor also ensures compliance with all Federal, State and local laws and ethical business practices. You will be actively involved in the selection, orientation and training of crew members at Taco Bell - Columbia Ave Qualified Store Supervisor candidates will have previous experience in restaurants or managing teams. You should love working with people and be a team leader. This role is full time or part time. We are hiring immediately, so submit your application today!
What began as an idea between two brothers to open a Mexican restaurant has since grown into one of the largest, privately held Taco Bell franchisees in America. At Border Foods, we work with a people-first mantra. From cooks to cashiers to restaurant managers and beyond, we work together to bring to life the Core Values of Border Foods. Welcome to our family where you will continue to learn, evolve, and shape what comes next on our mission of making lives better. At Border Foods, our purpose is to Make Lives Better and it is at the foundation of all that we do. We are proud of our family culture that develops people and provides career growth in pristine restaurants where people aspire to work, guests desire to dine where Live Más comes to life. Your role as a Team Member is to feed people's lives with Más. You'll feed customers with great tasting food and provide great service, so our customers keep coming back! You're a representation of the brand in everything you do. What's in it for you? -Flexible scheduling -Top pay in the industry -Education programs, including GED and Tuition Reimbursement offerings -Scholarship opportunities -Medical/Dental/Vision benefits offered for all positions - even part-time! -Free food! -Vacation Time (Paid Time Off) -Vacation Donation Program -An incredible culture that encourages career growth and support Team Member Responsibilities: Food Champion - Prepare food ingredients - Assemble food orders and check to make sure orders are correct - Package products - Maintain a clean, safe work environment - Be knowledgeable about menu items and promotions Service Champion - Greet customers in the restaurant - Take orders - Handle payments and thank customers - Maintain a clean, safe working and dining environment - Be knowledgeable about menu items and promotions Priority Sequence - Safety - Service - Cleaning - Stocking Physical Demands: The physical demands for this position are sits, stands, bends, lifts, and moves intermittently during working hours. These physical requirements may be accomplished with or without reasonable accommodation. The duties of this position may change from time to time. Border Foods reserves the right to add or delete duties and responsibilities at the discretion of Border Foods or its managers. This job description is intended to describe the general level of work being performed. It is not intended to be all-inclusive. Border Foods is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and individuals with Disabilities and does not discriminate based on gender identity or sexual orientation. "You are applying for work with a franchisee of Taco Bell, not Taco Bell Corp. or any of its affiliates. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own wage and benefit programs that can vary among franchisees." $10 per hour - $20 per hour
06/20/2026
Full time
What began as an idea between two brothers to open a Mexican restaurant has since grown into one of the largest, privately held Taco Bell franchisees in America. At Border Foods, we work with a people-first mantra. From cooks to cashiers to restaurant managers and beyond, we work together to bring to life the Core Values of Border Foods. Welcome to our family where you will continue to learn, evolve, and shape what comes next on our mission of making lives better. At Border Foods, our purpose is to Make Lives Better and it is at the foundation of all that we do. We are proud of our family culture that develops people and provides career growth in pristine restaurants where people aspire to work, guests desire to dine where Live Más comes to life. Your role as a Team Member is to feed people's lives with Más. You'll feed customers with great tasting food and provide great service, so our customers keep coming back! You're a representation of the brand in everything you do. What's in it for you? -Flexible scheduling -Top pay in the industry -Education programs, including GED and Tuition Reimbursement offerings -Scholarship opportunities -Medical/Dental/Vision benefits offered for all positions - even part-time! -Free food! -Vacation Time (Paid Time Off) -Vacation Donation Program -An incredible culture that encourages career growth and support Team Member Responsibilities: Food Champion - Prepare food ingredients - Assemble food orders and check to make sure orders are correct - Package products - Maintain a clean, safe work environment - Be knowledgeable about menu items and promotions Service Champion - Greet customers in the restaurant - Take orders - Handle payments and thank customers - Maintain a clean, safe working and dining environment - Be knowledgeable about menu items and promotions Priority Sequence - Safety - Service - Cleaning - Stocking Physical Demands: The physical demands for this position are sits, stands, bends, lifts, and moves intermittently during working hours. These physical requirements may be accomplished with or without reasonable accommodation. The duties of this position may change from time to time. Border Foods reserves the right to add or delete duties and responsibilities at the discretion of Border Foods or its managers. This job description is intended to describe the general level of work being performed. It is not intended to be all-inclusive. Border Foods is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and individuals with Disabilities and does not discriminate based on gender identity or sexual orientation. "You are applying for work with a franchisee of Taco Bell, not Taco Bell Corp. or any of its affiliates. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set their own wage and benefit programs that can vary among franchisees." $10 per hour - $20 per hour
Rochester Precision Optics LLC
West Henrietta, New York
Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential. SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including - Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Position Overview: The CNC Machinist I is responsible for operating, monitoring, and optimizing CNC machining processes to produce high-precision components in a production manufacturing environment. This role requires a strong understanding of machining fundamentals, blueprint interpretation, inspection techniques, tooling, and process control to consistently achieve quality and production objectives. Working from established setups, programs, and process documentation, the CNC Machinist I monitors machining performance, performs advanced inspections, troubleshoots production issues, and makes appropriate process adjustments to maintain dimensional accuracy, quality, and throughput. This position serves as a technical resource within the machining department and plays a key role in supporting safe, efficient, and cost-effective manufacturing operations. Key Responsibilities: Review and interpret engineering drawings, blueprints, specifications, routers, and work instructions to understand part requirements, tolerances, and machining processes. Operate CNC mills, lathes, and other machining equipment using established programs, setups, and process documentation. Monitor machining operations and make appropriate adjustments to offsets, tooling, feeds, speeds, and process parameters to maintain dimensional accuracy, quality, and productivity. Perform advanced in-process and final inspections using micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and other precision measuring equipment. Verify product conformance to dimensional, geometric, and cosmetic requirements and ensure all quality standards are met. Troubleshoot machining, tooling, quality, and process-related issues and communicate concerns to technical leads or management as appropriate. Perform tooling changes, tool life monitoring, and wear compensation to maintain stable machining processes. Assist with machine setup activities, process validation, and first-piece verification when required. Maintain accurate production, inspection, maintenance, and ERP documentation. Support continuous improvement initiatives focused on quality, efficiency, throughput, scrap reduction, and cost savings. Train, assist, and support less experienced operators as needed while promoting best practices within the department. Perform and document routine operator-level preventative maintenance activities. Maintain a clean, organized, and safe work environment. Be available for occasional overtime to support production requirements. Required Skills & Qualifications:High School Diploma/GED or vocational equivalent required.Minimum 3 years of CNC machining experience within a precision manufacturing environment.Demonstrated experience operating CNC mills and/or lathes, including offset adjustments, tooling changes, process monitoring, and troubleshooting production issues.Ability to read and interpret engineering drawings, blueprints, specifications, and GD&T requirements.Strong understanding of machining principles including feeds, speeds, tool wear, cutting tool selection, and process control.Proficiency with precision inspection equipment including micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and similar metrology tools.Working knowledge of G-code and M-code programming, including the ability to review and perform minor program edits when required.Understanding of machine setup principles and machining processes, with the ability to support setup and process validation activities.Strong mechanical aptitude and problem-solving skills with the ability to identify and resolve machining and quality concerns.Demonstrated commitment to safety, quality, attention to detail, and continuous improvement. Core Competencies:Results-Oriented: Motivated, hard-working and ready to level-up;Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;Process Oriented: Well organized, demonstrating attention to detail;Analytical: Possess a "If there's a problem, I'll find a solution" attitude;Accountable: Demanding the highest quality from yourself and team members;Detail-Oriented: Have excellent time management and organizational skills;A Team Player: Reliable, collaborative, flexible with a positive 'get things done' attitude; Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits:Competitive compensation package linked to your experience and performance.401(k) with company match and Tuition Reimbursement opportunities.Health, dental, vision, HSA, & life insurance.Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: This position works primarily in a manufacturing environment supporting CNC machining operations and precision component production. Requires prolonged periods of standing and walking throughout the workday while operating equipment, performing inspections, and supporting production activities. Regular use of hands, fingers, and arms to operate machinery, handle tooling, manipulate parts, and perform precision measurements. Frequent lifting, carrying, pushing, and pulling of raw materials, tooling, fixtures, and finished components. Ability to safely lift up to 50 pounds is required. Requires frequent bending, reaching, twisting, crouching, and movement around machining equipment and workstations. Regular use of precision measuring equipment including micrometers, calipers, indicators, height gauges, comparators, and other metrology tools. Requires visual acuity sufficient to inspect parts, identify defects, verify dimensions, review technical documentation, and safely operate equipment. Frequent interaction with CNC mills, lathes and other manufacturing equipment containing moving mechanical components. Regular exposure to machine oils, coolants, metal chips, lubricants, cleaning agents, and other manufacturing-related materials. Safety glasses with side shields and other required personal protective equipment (PPE) must be worn in designated manufacturing areas. Noise levels are typically moderate to loud and may require hearing protection in designated areas. Requires routine use of computers and manufacturing software for reviewing work instructions, documenting production activities, accessing ERP systems, and recording inspection data. May work across multiple machining cells, equipment platforms, or departments based on production requirements and business needs. Occasional overtime may be required to support production schedules, customer commitments, and departmental objectives. Disclaimer: This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential. Compensation details: 26-29 Hourly Wage PIec65d-8687
06/20/2026
Full time
Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential. SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including - Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Position Overview: The CNC Machinist I is responsible for operating, monitoring, and optimizing CNC machining processes to produce high-precision components in a production manufacturing environment. This role requires a strong understanding of machining fundamentals, blueprint interpretation, inspection techniques, tooling, and process control to consistently achieve quality and production objectives. Working from established setups, programs, and process documentation, the CNC Machinist I monitors machining performance, performs advanced inspections, troubleshoots production issues, and makes appropriate process adjustments to maintain dimensional accuracy, quality, and throughput. This position serves as a technical resource within the machining department and plays a key role in supporting safe, efficient, and cost-effective manufacturing operations. Key Responsibilities: Review and interpret engineering drawings, blueprints, specifications, routers, and work instructions to understand part requirements, tolerances, and machining processes. Operate CNC mills, lathes, and other machining equipment using established programs, setups, and process documentation. Monitor machining operations and make appropriate adjustments to offsets, tooling, feeds, speeds, and process parameters to maintain dimensional accuracy, quality, and productivity. Perform advanced in-process and final inspections using micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and other precision measuring equipment. Verify product conformance to dimensional, geometric, and cosmetic requirements and ensure all quality standards are met. Troubleshoot machining, tooling, quality, and process-related issues and communicate concerns to technical leads or management as appropriate. Perform tooling changes, tool life monitoring, and wear compensation to maintain stable machining processes. Assist with machine setup activities, process validation, and first-piece verification when required. Maintain accurate production, inspection, maintenance, and ERP documentation. Support continuous improvement initiatives focused on quality, efficiency, throughput, scrap reduction, and cost savings. Train, assist, and support less experienced operators as needed while promoting best practices within the department. Perform and document routine operator-level preventative maintenance activities. Maintain a clean, organized, and safe work environment. Be available for occasional overtime to support production requirements. Required Skills & Qualifications:High School Diploma/GED or vocational equivalent required.Minimum 3 years of CNC machining experience within a precision manufacturing environment.Demonstrated experience operating CNC mills and/or lathes, including offset adjustments, tooling changes, process monitoring, and troubleshooting production issues.Ability to read and interpret engineering drawings, blueprints, specifications, and GD&T requirements.Strong understanding of machining principles including feeds, speeds, tool wear, cutting tool selection, and process control.Proficiency with precision inspection equipment including micrometers, calipers, indicators, height gauges, thread gauges, optical comparators, and similar metrology tools.Working knowledge of G-code and M-code programming, including the ability to review and perform minor program edits when required.Understanding of machine setup principles and machining processes, with the ability to support setup and process validation activities.Strong mechanical aptitude and problem-solving skills with the ability to identify and resolve machining and quality concerns.Demonstrated commitment to safety, quality, attention to detail, and continuous improvement. Core Competencies:Results-Oriented: Motivated, hard-working and ready to level-up;Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;Process Oriented: Well organized, demonstrating attention to detail;Analytical: Possess a "If there's a problem, I'll find a solution" attitude;Accountable: Demanding the highest quality from yourself and team members;Detail-Oriented: Have excellent time management and organizational skills;A Team Player: Reliable, collaborative, flexible with a positive 'get things done' attitude; Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits:Competitive compensation package linked to your experience and performance.401(k) with company match and Tuition Reimbursement opportunities.Health, dental, vision, HSA, & life insurance.Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: This position works primarily in a manufacturing environment supporting CNC machining operations and precision component production. Requires prolonged periods of standing and walking throughout the workday while operating equipment, performing inspections, and supporting production activities. Regular use of hands, fingers, and arms to operate machinery, handle tooling, manipulate parts, and perform precision measurements. Frequent lifting, carrying, pushing, and pulling of raw materials, tooling, fixtures, and finished components. Ability to safely lift up to 50 pounds is required. Requires frequent bending, reaching, twisting, crouching, and movement around machining equipment and workstations. Regular use of precision measuring equipment including micrometers, calipers, indicators, height gauges, comparators, and other metrology tools. Requires visual acuity sufficient to inspect parts, identify defects, verify dimensions, review technical documentation, and safely operate equipment. Frequent interaction with CNC mills, lathes and other manufacturing equipment containing moving mechanical components. Regular exposure to machine oils, coolants, metal chips, lubricants, cleaning agents, and other manufacturing-related materials. Safety glasses with side shields and other required personal protective equipment (PPE) must be worn in designated manufacturing areas. Noise levels are typically moderate to loud and may require hearing protection in designated areas. Requires routine use of computers and manufacturing software for reviewing work instructions, documenting production activities, accessing ERP systems, and recording inspection data. May work across multiple machining cells, equipment platforms, or departments based on production requirements and business needs. Occasional overtime may be required to support production schedules, customer commitments, and departmental objectives. Disclaimer: This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Schedule: Monday-Friday, 10:00 PM-6:30 AM. New hires will complete approximately 4-6 weeks of training on 1st Shift before transitioning to 3rd Shift. Includes a 10% shift differential. Compensation details: 26-29 Hourly Wage PIec65d-8687
Construction Coordinator Location: Ft. Wayne Position Type: Full-Time Compensation: Competitive Pay Benefits: Health, Vision, Basic Dental & Life Insurance, STD, LTD, 401k, Paid Time Off, Paid Training Position Summary: The Construction Coordinator at Mercury Broadband assists in the planning, organizing, and provides primary field supervision of outsourced fiber optic network construction, both aerial and underground. This role involves ensuring project timelines, budgets, and quality standards are met while complying with regulatory requirements. Reporting to the General Manager, the Construction Coordinator is the face of Mercury Broadband for field coordination with contractor construction teams. Key Responsibilities: Track performance of outsourced construction projects, ensuring compliance with required documentation, quality standards, and project specifications. Conduct project walkouts to assess planned construction site, project timeline, and budget. Support internal project management teams, including managing permitting and other pre-construction requirements as needed. Communicate project updates to the VP Fiber Construction and General Manager, tracking timelines, budgets, and any changes affecting project scope or costs. Reconcile invoices with completed work and collaborate with the accounting department for payment approvals. Ensure compliance with federal, state, local, and industry regulations. Identify risks, develop solutions, and maintain project timelines. Complete all project documentation and accurate closeout packages. Skills and Requirements: Experience in fiber optic network construction supervision. Strong communication and organizational skills. Ability to operate independently and coordinate with external contractors to conduct and document site inspections accurately. Familiarity with federal, state, and local construction regulations. Proficiency with project management software, Vitruvi preferred. Knowledge of quality assurance and contractor performance monitoring. Preferred Education and Experience: Relevant experience in construction management or a related field. Prior experience overseeing contractor compliance and managing construction timelines. Understanding of construction project budgeting and scheduling. Physical Requirements Ability to stand, walk, sit, and traverse job sites for extended periods. Ability to bend, twist, stoop, kneel, crouch, crawl, and squat repeatedly. Ability to reach and grasp with hands and arms; must maintain balance during tasks, including carrying tools or materials while climbing. Ability to climb ladders (up to 25-40 ft), stairs, scaffolds, lifts, and elevated platforms using proper fall protection. Ability to lift, carry, push, or pull 50-100 lbs (frequently or repetitively depending on task). Ability to move equipment up and down stairs when necessary. Sufficient hand strength and dexterity to operate hand tools and power tools as well as work with cables, connectors, microwave gear, and small components. Ability to work outdoors and indoors in all weather conditions year-round, including harsh environments. Ability to work in attics, crawl spaces, tight or confined areas. Ability to stand or kneel for long periods. Ability to ride in a vehicle for extended periods when traveling to job sites. Ability to work around live electrical components and sensitive equipment. Ability to see the full color spectrum (important for cable/connector identification). Normal visual acuity and hand-eye coordination for detailed installation work. Ability to hear and communicate effectively with team members or customers. Regular, predictable attendance is required; including quarter-driven hours as business demands dictate. Ability to sit at a computer terminal for an extended period. May be required to operate general office equipment including but not limited to copiers, printers. Organization: Mercury Broadband is a leading provider of high-speed Internet and digital phone service. The Company was founded in Topeka, KS, after recognizing a need for Broadband Internet access in rural America. A hybrid approach to serving these "last-mile" customers was developed by extending high capacity fiberoptic networks with the range, reliability, and flexibility of carrier-class wireless technologies. Today Mercury Broadband's rapidly expanding network is headquartered in Kansas City and provides Internet access to communities throughout five states across the Midwest. Mercury Broadband is committed to a diverse and inclusive workplace. Mercury is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please contact the Human Resources Department. PI8b1eb7d5e4ac-6474
06/20/2026
Full time
Construction Coordinator Location: Ft. Wayne Position Type: Full-Time Compensation: Competitive Pay Benefits: Health, Vision, Basic Dental & Life Insurance, STD, LTD, 401k, Paid Time Off, Paid Training Position Summary: The Construction Coordinator at Mercury Broadband assists in the planning, organizing, and provides primary field supervision of outsourced fiber optic network construction, both aerial and underground. This role involves ensuring project timelines, budgets, and quality standards are met while complying with regulatory requirements. Reporting to the General Manager, the Construction Coordinator is the face of Mercury Broadband for field coordination with contractor construction teams. Key Responsibilities: Track performance of outsourced construction projects, ensuring compliance with required documentation, quality standards, and project specifications. Conduct project walkouts to assess planned construction site, project timeline, and budget. Support internal project management teams, including managing permitting and other pre-construction requirements as needed. Communicate project updates to the VP Fiber Construction and General Manager, tracking timelines, budgets, and any changes affecting project scope or costs. Reconcile invoices with completed work and collaborate with the accounting department for payment approvals. Ensure compliance with federal, state, local, and industry regulations. Identify risks, develop solutions, and maintain project timelines. Complete all project documentation and accurate closeout packages. Skills and Requirements: Experience in fiber optic network construction supervision. Strong communication and organizational skills. Ability to operate independently and coordinate with external contractors to conduct and document site inspections accurately. Familiarity with federal, state, and local construction regulations. Proficiency with project management software, Vitruvi preferred. Knowledge of quality assurance and contractor performance monitoring. Preferred Education and Experience: Relevant experience in construction management or a related field. Prior experience overseeing contractor compliance and managing construction timelines. Understanding of construction project budgeting and scheduling. Physical Requirements Ability to stand, walk, sit, and traverse job sites for extended periods. Ability to bend, twist, stoop, kneel, crouch, crawl, and squat repeatedly. Ability to reach and grasp with hands and arms; must maintain balance during tasks, including carrying tools or materials while climbing. Ability to climb ladders (up to 25-40 ft), stairs, scaffolds, lifts, and elevated platforms using proper fall protection. Ability to lift, carry, push, or pull 50-100 lbs (frequently or repetitively depending on task). Ability to move equipment up and down stairs when necessary. Sufficient hand strength and dexterity to operate hand tools and power tools as well as work with cables, connectors, microwave gear, and small components. Ability to work outdoors and indoors in all weather conditions year-round, including harsh environments. Ability to work in attics, crawl spaces, tight or confined areas. Ability to stand or kneel for long periods. Ability to ride in a vehicle for extended periods when traveling to job sites. Ability to work around live electrical components and sensitive equipment. Ability to see the full color spectrum (important for cable/connector identification). Normal visual acuity and hand-eye coordination for detailed installation work. Ability to hear and communicate effectively with team members or customers. Regular, predictable attendance is required; including quarter-driven hours as business demands dictate. Ability to sit at a computer terminal for an extended period. May be required to operate general office equipment including but not limited to copiers, printers. Organization: Mercury Broadband is a leading provider of high-speed Internet and digital phone service. The Company was founded in Topeka, KS, after recognizing a need for Broadband Internet access in rural America. A hybrid approach to serving these "last-mile" customers was developed by extending high capacity fiberoptic networks with the range, reliability, and flexibility of carrier-class wireless technologies. Today Mercury Broadband's rapidly expanding network is headquartered in Kansas City and provides Internet access to communities throughout five states across the Midwest. Mercury Broadband is committed to a diverse and inclusive workplace. Mercury is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please contact the Human Resources Department. PI8b1eb7d5e4ac-6474
University of New Mexico - Hospitals
Albuquerque, New Mexico
RN INPATIENT - All Progressive Care Units (PCU) - Day & Night Shifts - University of New Mexico Hospital - Albuquerque We have immediate RN hiring across our PCU departments. All shifts available! Part Time & Full Time. Apply and we will have a hiring manager contact you within 48 hours to discuss your interests and placement. Sign-On Bonus Available Relocation Assistance Available Rate based on experience: Minimum $34.84 (RN Inpatient II) to Max: $47.33 (RN Inpatient V) Receive 17% Weekday Nights, 26% Weekend Nights and 15% Weekend Day shift differentials Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. CURRENTLY HIRING: Coronary Care Subacute The Adult Inpatient Admission Unit (PAAU) A fast paced, high throughput unit that serves as both an Observation Unit and a bridge for patients transitioning from the Emergency Department to the Progressive Care Units. Nurses in the PAAU manage diverse patient populations across multiple specialties in a highly collaborative environment. Adult Oncology Serve patients who are receiving chemotherapy, stem cell transplants, radiation and more. We also participate in research measures aimed at preventing and treating cancer diagnoses. We are New Mexico's only NCI designated Comprehensive Cancer Center and one of only 51 in the United States. Family Medicine Inpatient (3-N) Patient population ranges from End Stage Renal Disease, Liver Failure, Mobility Issues, Surgical and more. We also are the secondary unit for Cystic Fibrosis patients. Gen Med/SAC (4-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. General Medicine (5-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Cystic Fibrosis. We also were the primary COVID unit during the height of the pandemic. General Surgery/Transplant (6-S) Care for primarily pre-op and post-op renal transplant patients as well as some patients needing to be treated for transplant rejection. We also care for surgical oncology, hepatobiliary and general surgery patients. Trauma Subacute (4-E) Patient population consists of primarily trauma patients along with specialties such as chronic pain, complex ENT patients, and everything in between. Orthopedics (3-S) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. Surgical Specialty Unit (4-S) Service a wide variety of patient populations being cared by services such as General Surgery, Emergency General Surgery, Urology, Plastics and more. We see a lot of patients with surgical drains, complicated wounds, wound VAC's, chest tubes, indwelling urinary catheters, ostomies and the occasional trach . Neuroscience (5-S) Serve patients who have experienced stroke, seizures, traumatic brain injuries, spinal injuries, multiple sclerosis and more. We have been designated by the American Heart Association/American Stroke Association as a Primary Advanced Stroke Center. JOB SUMMARY Work within the nursing process to provide direct nursing care to assigned patients. Provide clinical leadership for other staff and assume relief charge duties when designated. Serve as a role model to promote a positive work environment and quality patient care. Ensure adherence to Hospitals and departmental policies and procedures. Patient care assignment may include Neonate, Pediatric, Adolescent, Adult and Geriatric age groups. ESSENTIAL FUNCTIONS - Essential and other responsibilities and duties may include but are not limited to the following: PATIENT CARE - Deliver safe direct care to an assigned group of patients as required POLICIES - Work within Hospitals, Nursing division and departmental policies CARE PLAN - Work in collaboration with the healthcare team, implement and document individualized care plans incorporating age specific considerations, including discharge planning and patient/family teaching TESTS AND PROCEDURES - Assist with special tests and procedures, ensure proper consent has been obtained PARTICIPATION - Participate in orientation; upon successful completion of preceptor training assume precepting and evaluation responsibilities of new personnel EMERGENCY MEASURES - Assist with or institute emergency measures for sudden, adverse developments in patients MEDICAL RECORDS - Ensure that patient medical records contain necessary information INQUIRIES - Answer telephones and triage calls as per departmental policy MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings ENVIRONMENT - Maintain a safe, comfortable, and therapeutic environment for patients/families in accordance with Hospitals standards DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MINIMUM QUALIFICATIONS EDUCATION: Nursing program (nationally accredited) graduate CERTIFICATIONS: RN MATRIX - Complete and maintain unit/clinic based required certifications and competencies as listed in the department expectations/and or the unit/clinic education matrix LICENSES/CERTIFICATIONS: Licensed Registered Nurse (RN) in State of New Mexico or as allowed by reciprocal agreement by State of New Mexico CPR Certification for Healthcare/BLS Providers or for Professional Rescuers or must obtain within 30 calendar days of date of position TESTING REQUIREMENTS: Obtain UNMH IV Verification within 6 months of position Tuberculosis testing is completed upon hire and additionally as required PREFERRED QUALIFICATIONS PREFERRED EDUCATION: Bachelor's Degree of Science in Nursing PREFERRED EXPERIENCE: Bilingual English/Spanish Bilingual English/Keres, Tewa, Tiwa, Towa, Zuni, or Navajo PREFERRED LICENSURE/CERTIFICATION: Nationally Certified in area of specialty WORKING CONDITIONS ENVIRONMENTAL CONDITIONS: Sig Hazard: Chemicals, bio hazardous materials requiring extensive safety precautions and may require protective equipment PHYSICAL CONDITIONS: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Department: Registered Nurse
06/20/2026
Full time
RN INPATIENT - All Progressive Care Units (PCU) - Day & Night Shifts - University of New Mexico Hospital - Albuquerque We have immediate RN hiring across our PCU departments. All shifts available! Part Time & Full Time. Apply and we will have a hiring manager contact you within 48 hours to discuss your interests and placement. Sign-On Bonus Available Relocation Assistance Available Rate based on experience: Minimum $34.84 (RN Inpatient II) to Max: $47.33 (RN Inpatient V) Receive 17% Weekday Nights, 26% Weekend Nights and 15% Weekend Day shift differentials Compensation Disclaimer Compensation for this role is based on a number of factors, including but not limited to experience, education, and other business and organizational considerations. CURRENTLY HIRING: Coronary Care Subacute The Adult Inpatient Admission Unit (PAAU) A fast paced, high throughput unit that serves as both an Observation Unit and a bridge for patients transitioning from the Emergency Department to the Progressive Care Units. Nurses in the PAAU manage diverse patient populations across multiple specialties in a highly collaborative environment. Adult Oncology Serve patients who are receiving chemotherapy, stem cell transplants, radiation and more. We also participate in research measures aimed at preventing and treating cancer diagnoses. We are New Mexico's only NCI designated Comprehensive Cancer Center and one of only 51 in the United States. Family Medicine Inpatient (3-N) Patient population ranges from End Stage Renal Disease, Liver Failure, Mobility Issues, Surgical and more. We also are the secondary unit for Cystic Fibrosis patients. Gen Med/SAC (4-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. General Medicine (5-W) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Cystic Fibrosis. We also were the primary COVID unit during the height of the pandemic. General Surgery/Transplant (6-S) Care for primarily pre-op and post-op renal transplant patients as well as some patients needing to be treated for transplant rejection. We also care for surgical oncology, hepatobiliary and general surgery patients. Trauma Subacute (4-E) Patient population consists of primarily trauma patients along with specialties such as chronic pain, complex ENT patients, and everything in between. Orthopedics (3-S) Care for patients with many different conditions and disease processes. Our specialized care population are patients with Pulmonary Arterial Hypertension. Surgical Specialty Unit (4-S) Service a wide variety of patient populations being cared by services such as General Surgery, Emergency General Surgery, Urology, Plastics and more. We see a lot of patients with surgical drains, complicated wounds, wound VAC's, chest tubes, indwelling urinary catheters, ostomies and the occasional trach . Neuroscience (5-S) Serve patients who have experienced stroke, seizures, traumatic brain injuries, spinal injuries, multiple sclerosis and more. We have been designated by the American Heart Association/American Stroke Association as a Primary Advanced Stroke Center. JOB SUMMARY Work within the nursing process to provide direct nursing care to assigned patients. Provide clinical leadership for other staff and assume relief charge duties when designated. Serve as a role model to promote a positive work environment and quality patient care. Ensure adherence to Hospitals and departmental policies and procedures. Patient care assignment may include Neonate, Pediatric, Adolescent, Adult and Geriatric age groups. ESSENTIAL FUNCTIONS - Essential and other responsibilities and duties may include but are not limited to the following: PATIENT CARE - Deliver safe direct care to an assigned group of patients as required POLICIES - Work within Hospitals, Nursing division and departmental policies CARE PLAN - Work in collaboration with the healthcare team, implement and document individualized care plans incorporating age specific considerations, including discharge planning and patient/family teaching TESTS AND PROCEDURES - Assist with special tests and procedures, ensure proper consent has been obtained PARTICIPATION - Participate in orientation; upon successful completion of preceptor training assume precepting and evaluation responsibilities of new personnel EMERGENCY MEASURES - Assist with or institute emergency measures for sudden, adverse developments in patients MEDICAL RECORDS - Ensure that patient medical records contain necessary information INQUIRIES - Answer telephones and triage calls as per departmental policy MEDICATION - Administer medication, including IV medication, via the Seven Rights; document and communicate clinical findings ENVIRONMENT - Maintain a safe, comfortable, and therapeutic environment for patients/families in accordance with Hospitals standards DEVELOPMENT - Enhance professional growth and development through participation in educational programs, reading current literature, attending in-services, meetings and workshops PATIENT SAFETY 1 - Follow patient safety-related policies, procedures and protocols PATIENT SAFETY 2 - Demonstrate proactive approach to patient safety by seeking opportunities to improve patient safety through questioning of current policies and processes PATIENT SAFETY 3 - Identify and report/correct environmental conditions and/or situations that may put a patient at undue risk PATIENT SAFETY 4 - Report potential or actual patient safety concerns, medical errors and/or near misses in a timely manner PATIENT SAFETY 5 - Encourage patients to actively participate in their own care by asking questions and reporting treatment or situations that they don't understand or may "not seem right" MINIMUM QUALIFICATIONS EDUCATION: Nursing program (nationally accredited) graduate CERTIFICATIONS: RN MATRIX - Complete and maintain unit/clinic based required certifications and competencies as listed in the department expectations/and or the unit/clinic education matrix LICENSES/CERTIFICATIONS: Licensed Registered Nurse (RN) in State of New Mexico or as allowed by reciprocal agreement by State of New Mexico CPR Certification for Healthcare/BLS Providers or for Professional Rescuers or must obtain within 30 calendar days of date of position TESTING REQUIREMENTS: Obtain UNMH IV Verification within 6 months of position Tuberculosis testing is completed upon hire and additionally as required PREFERRED QUALIFICATIONS PREFERRED EDUCATION: Bachelor's Degree of Science in Nursing PREFERRED EXPERIENCE: Bilingual English/Spanish Bilingual English/Keres, Tewa, Tiwa, Towa, Zuni, or Navajo PREFERRED LICENSURE/CERTIFICATION: Nationally Certified in area of specialty WORKING CONDITIONS ENVIRONMENTAL CONDITIONS: Sig Hazard: Chemicals, bio hazardous materials requiring extensive safety precautions and may require protective equipment PHYSICAL CONDITIONS: Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects or people. Physical Demand requirements are in excess of those for Medium Work. Department: Registered Nurse
Work Where You Matter At Dollar General, our mission is Serving Others! We value each and every one of our employees. Whether you are looking to launch a new career in one of our many convenient Store locations, Distribution Centers, Store Support Center or with our Private Fleet Team, we are proud to provide a wide range of career opportunities. We are not just a retail company; we are a company that values the unique strengths and perspectives that each individual brings. Your difference truly makes a difference at Dollar General. How would you like to Serve? Join the Dollar General Journey and see how your career can thrive. Company Overview Dollar General Corporation has been delivering value to shoppers for more than 80 years. Dollar General helps shoppers Save time. Save money. Every day. by offering products that are frequently used and replenished, such as food, snacks, health and beauty aids, cleaning supplies, basic apparel, housewares and seasonal items at everyday low prices in convenient neighborhood locations. Learn more about Dollar General at Job Details GENERAL SUMMARY: Responsible for the management of all employees in the effective planning and implementation of all store processes, including ordering, receiving, stocking, presentation, selling, staffing and support. DUTIES and ESSENTIAL JOB FUNCTIONS: Recruit, select and retain qualified employees according to federal and state labor laws and company policies; ensure store is properly staffed. Provide proper training for employees; conduct performance evaluations; identify gaps for appropriate solutions and/or counseling, up to and including termination. Make recommendations regarding employee pay rate and advancement. Communicate performance, conduct and safety expectations regularly; coordinate meetings and events to encourage safety, security and policies. Ensure that the store is appropriately staffed and effectively opened and closed each day. Personally open the store a minimum of two times per week; personally close the store a minimum of two times per week. Evaluate operating statements to identify business trends (including sales, profitability, and turn), expense control opportunities, potential shrink, and errors. Order to ensure the meeting or exceeding of in-stock targets; review ordering plan, seasonal direction and inventory management issues on a weekly basis; follow up on Basic Stock Replenishment (BSR)/cycle counts. Facilitate the efficient staging, stocking and storage of merchandise by following defined company work processes. Ensure that all merchandise is presented according to established practices; utilize merchandise fixtures properly including presentation, product pricing and signage. Maintain accurate inventory levels by controlling damages, markdowns, scanning, paperwork, and facility controls. Ensure the financial integrity of the store through strict cashier accountability, key control, and adherence to stated company security practices and cash control procedures. Provide superior customer service leadership. Maintain a clean, well-organized store; facilitate a safe and secure working and shopping environment. Ensure that store is adequately equipped with tools necessary to perform required tasks. Follow company policies and procedures as outlined in the Standard Operating Procedures manual, Employee Handbook, and company communications; ensure employee compliance. Complete all paperwork and documentation according to guidelines and deadlines. Qualifications KNOWLEDGE and SKILLS: Ability to read and interpret documents such as diagrams, safety rules, operating and maintenance instructions, and procedures manuals Ability to perform mathematical calculations such as addition, subtraction, multiplication, division, and percentages. Knowledge of cash handling procedures including cashier accountability and deposit control. Ability to perform IBM cash register functions to generate reports. Knowledge of inventory management and merchandising practices. Effective oral and written communication skills. Effective interpersonal skills. Knowledge of recruiting, interviewing, hiring, counseling and termination practices including legal compliance and internal processes. Knowledge of cash, facility and safety control policies and practices (deposits, store keys, SAFE program, etc.) Good organization skills with attention to detail. Ability to solve problems and deal with a variety of situations where limited standardization exists. Certain store locations may give preference to bilingual Spanish speakers. WORK EXPERIENCE and/or EDUCATION: High school diploma or equivalent strongly preferred. One year of management experience in a retail environment preferred. COMPETENCIES: Aligns motives, values and beliefs with Dollar General values. Supports ownership by tapping into the potential of others. Acts as a liaison between the corporate office and store employees. Fosters cooperation and collaboration. Interacts with staff tactfully yet directly and maintains an open forum of exchange. Demonstrates responsiveness and sensitivity to customer needs. Applies basic principles of retail (i.e., ordering cycles, peak inventories, merchandise flow, etc.). Provides continuous attention to development of staff. Recruits, hires and trains qualified applicants to fulfill a store need. Ensures store compliance to federal labor laws and company policies and procedures. WORKING CONDITIONS and PHYSICAL REQUIREMENTS: Frequent walking and standing. Frequent bending, stooping and kneeling to run check out station, stock merchandise and unload trucks. Frequent handling of merchandise and equipment such as hand-held scanner, pricing guns, box cutters, merchandise containers, two-wheel dollies, and U-boats (six-wheel carts). Frequent and proper lifting of up to 40 pounds; occasional lifting of up to 55 pounds. Occasional climbing (using ladder). Regularly driving/providing own transportation to make bank deposits and occasionally to attend management meetings and to other Dollar General stores. Fast-paced environment; moderate noise level. Occasionally exposed to outside weather conditions. Dollar General Corporation is an equal opportunity employer. #
06/20/2026
Full time
Work Where You Matter At Dollar General, our mission is Serving Others! We value each and every one of our employees. Whether you are looking to launch a new career in one of our many convenient Store locations, Distribution Centers, Store Support Center or with our Private Fleet Team, we are proud to provide a wide range of career opportunities. We are not just a retail company; we are a company that values the unique strengths and perspectives that each individual brings. Your difference truly makes a difference at Dollar General. How would you like to Serve? Join the Dollar General Journey and see how your career can thrive. Company Overview Dollar General Corporation has been delivering value to shoppers for more than 80 years. Dollar General helps shoppers Save time. Save money. Every day. by offering products that are frequently used and replenished, such as food, snacks, health and beauty aids, cleaning supplies, basic apparel, housewares and seasonal items at everyday low prices in convenient neighborhood locations. Learn more about Dollar General at Job Details GENERAL SUMMARY: Responsible for the management of all employees in the effective planning and implementation of all store processes, including ordering, receiving, stocking, presentation, selling, staffing and support. DUTIES and ESSENTIAL JOB FUNCTIONS: Recruit, select and retain qualified employees according to federal and state labor laws and company policies; ensure store is properly staffed. Provide proper training for employees; conduct performance evaluations; identify gaps for appropriate solutions and/or counseling, up to and including termination. Make recommendations regarding employee pay rate and advancement. Communicate performance, conduct and safety expectations regularly; coordinate meetings and events to encourage safety, security and policies. Ensure that the store is appropriately staffed and effectively opened and closed each day. Personally open the store a minimum of two times per week; personally close the store a minimum of two times per week. Evaluate operating statements to identify business trends (including sales, profitability, and turn), expense control opportunities, potential shrink, and errors. Order to ensure the meeting or exceeding of in-stock targets; review ordering plan, seasonal direction and inventory management issues on a weekly basis; follow up on Basic Stock Replenishment (BSR)/cycle counts. Facilitate the efficient staging, stocking and storage of merchandise by following defined company work processes. Ensure that all merchandise is presented according to established practices; utilize merchandise fixtures properly including presentation, product pricing and signage. Maintain accurate inventory levels by controlling damages, markdowns, scanning, paperwork, and facility controls. Ensure the financial integrity of the store through strict cashier accountability, key control, and adherence to stated company security practices and cash control procedures. Provide superior customer service leadership. Maintain a clean, well-organized store; facilitate a safe and secure working and shopping environment. Ensure that store is adequately equipped with tools necessary to perform required tasks. Follow company policies and procedures as outlined in the Standard Operating Procedures manual, Employee Handbook, and company communications; ensure employee compliance. Complete all paperwork and documentation according to guidelines and deadlines. Qualifications KNOWLEDGE and SKILLS: Ability to read and interpret documents such as diagrams, safety rules, operating and maintenance instructions, and procedures manuals Ability to perform mathematical calculations such as addition, subtraction, multiplication, division, and percentages. Knowledge of cash handling procedures including cashier accountability and deposit control. Ability to perform IBM cash register functions to generate reports. Knowledge of inventory management and merchandising practices. Effective oral and written communication skills. Effective interpersonal skills. Knowledge of recruiting, interviewing, hiring, counseling and termination practices including legal compliance and internal processes. Knowledge of cash, facility and safety control policies and practices (deposits, store keys, SAFE program, etc.) Good organization skills with attention to detail. Ability to solve problems and deal with a variety of situations where limited standardization exists. Certain store locations may give preference to bilingual Spanish speakers. WORK EXPERIENCE and/or EDUCATION: High school diploma or equivalent strongly preferred. One year of management experience in a retail environment preferred. COMPETENCIES: Aligns motives, values and beliefs with Dollar General values. Supports ownership by tapping into the potential of others. Acts as a liaison between the corporate office and store employees. Fosters cooperation and collaboration. Interacts with staff tactfully yet directly and maintains an open forum of exchange. Demonstrates responsiveness and sensitivity to customer needs. Applies basic principles of retail (i.e., ordering cycles, peak inventories, merchandise flow, etc.). Provides continuous attention to development of staff. Recruits, hires and trains qualified applicants to fulfill a store need. Ensures store compliance to federal labor laws and company policies and procedures. WORKING CONDITIONS and PHYSICAL REQUIREMENTS: Frequent walking and standing. Frequent bending, stooping and kneeling to run check out station, stock merchandise and unload trucks. Frequent handling of merchandise and equipment such as hand-held scanner, pricing guns, box cutters, merchandise containers, two-wheel dollies, and U-boats (six-wheel carts). Frequent and proper lifting of up to 40 pounds; occasional lifting of up to 55 pounds. Occasional climbing (using ladder). Regularly driving/providing own transportation to make bank deposits and occasionally to attend management meetings and to other Dollar General stores. Fast-paced environment; moderate noise level. Occasionally exposed to outside weather conditions. Dollar General Corporation is an equal opportunity employer. #
