Sign on bonus for New Hires: up to $7,500 Pay: $27.64 per hour based on experience Shifts: Sun-Wed 7pm-5:30am. $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Preferred Education Medium / Heavy Duty truck technical training High school diploma or GED required Preferred Experience 3 years of experience in fleet maintenance and repair or 2-year school and 1 year of experience Current and valid driver's license. Preferred Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
05/22/2026
Full time
Sign on bonus for New Hires: up to $7,500 Pay: $27.64 per hour based on experience Shifts: Sun-Wed 7pm-5:30am. $600.00 Annual Boot and Tool allowance Outstanding benefits - Excellent full time career with a stable and growing company Move your Career FORWARD with SYSCO FOODS! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Preferred Education Medium / Heavy Duty truck technical training High school diploma or GED required Preferred Experience 3 years of experience in fleet maintenance and repair or 2-year school and 1 year of experience Current and valid driver's license. Preferred Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Pay: up to $20.00-$24.00 per hour, based on experience Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
05/22/2026
Full time
Pay: up to $20.00-$24.00 per hour, based on experience Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager QUALIFICATIONS Education Medium/Heavy Duty truck technical training 2-year school (preferred) l High school diploma or equivalent required Experience No experience required Current and valid driver's license (CDL Preferred) Professional Skills Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer-based diagnostic software for OEM s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Pay: up to $34 per hour, based on experience 3rd Shift available $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
05/20/2026
Full time
Pay: up to $34 per hour, based on experience 3rd Shift available $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
Description: Automotive Technician - GM Certified - No Weekends! Are you a driven, skilled technician ready to grow your career in a team-first environment? Harry Brown's is actively hiring a Automotive Technician - GM Certified - and we're offering a significant signing bonus for the right candidate. Whether you're GM-certified or an experienced tech ready to level up, we offer manufacturer-backed training, career development , and an opportunity to work with a supportive, growing team. Why Harry Brown's? Family-owned since 1968, Harry Brown's has grown into one of Southeastern Minnesota's largest multi-line dealerships, offering sales, service, financing, and customization of new and pre-owned vehicles. But what really sets us apart is our people-first culture . Our mission is to help families live a better life-starting with our employees. We're committed to: Teamwork : Humble, hungry, and smart people who lift each other up Authenticity : Real people doing real work Reputation : Small details matter Extra-ordinary Service : Creating "wow" moments every day With over 100 team members and continued growth, this is your chance to be part of something meaningful . Requirements: What You'll Do: Diagnose and repair engines, steering, brakes, suspension, transmissions, air conditioning, and more Diagnose and repair a wide range of systems: engines, brakes, suspension, A/C, transmissions, and more Work efficiently and accurately-always meeting dealership and manufacturer standards Communicate clearly with Service Advisors on job status Stay up to date on the latest diagnostics and repair techniques Be part of a Monday-Friday schedule-no weekends or evenings! What We're Looking For: Minimum 2 years of experience as a Master or Journeyman Technician 2+ years as a Master or Journeyman Technician Strong diagnostic and troubleshooting skills GM Level 2 or 3 certification is a plus Diesel engine experience is a bonus , not a must Passionate about delivering top-notch customer experiences ASE certification preferred Valid driver's license required Compensation & Benefits: $60,000-$120,000+ annually , based on experience & performance incentives Sign-On Bonus for experienced techs Medical, Dental, Vision Insurance - employer contributes toward premiums Employer-paid short/long-term disability & life insurance 401(k) with company match Health Savings Account with employer contribution Paid Vacation + 8 Paid Holidays Employee Discounts , including pet insurance & legal/ID protection NO weekends or late nights Paid vacation 6 paid holidays Pet Insurance Employee Discount Program Let's Talk! Call or text for a confidential interview-weekends and evenings welcome! Or apply online and start your journey with Harry Brown's today. PI57065b1107a1-7346
05/16/2026
Full time
Description: Automotive Technician - GM Certified - No Weekends! Are you a driven, skilled technician ready to grow your career in a team-first environment? Harry Brown's is actively hiring a Automotive Technician - GM Certified - and we're offering a significant signing bonus for the right candidate. Whether you're GM-certified or an experienced tech ready to level up, we offer manufacturer-backed training, career development , and an opportunity to work with a supportive, growing team. Why Harry Brown's? Family-owned since 1968, Harry Brown's has grown into one of Southeastern Minnesota's largest multi-line dealerships, offering sales, service, financing, and customization of new and pre-owned vehicles. But what really sets us apart is our people-first culture . Our mission is to help families live a better life-starting with our employees. We're committed to: Teamwork : Humble, hungry, and smart people who lift each other up Authenticity : Real people doing real work Reputation : Small details matter Extra-ordinary Service : Creating "wow" moments every day With over 100 team members and continued growth, this is your chance to be part of something meaningful . Requirements: What You'll Do: Diagnose and repair engines, steering, brakes, suspension, transmissions, air conditioning, and more Diagnose and repair a wide range of systems: engines, brakes, suspension, A/C, transmissions, and more Work efficiently and accurately-always meeting dealership and manufacturer standards Communicate clearly with Service Advisors on job status Stay up to date on the latest diagnostics and repair techniques Be part of a Monday-Friday schedule-no weekends or evenings! What We're Looking For: Minimum 2 years of experience as a Master or Journeyman Technician 2+ years as a Master or Journeyman Technician Strong diagnostic and troubleshooting skills GM Level 2 or 3 certification is a plus Diesel engine experience is a bonus , not a must Passionate about delivering top-notch customer experiences ASE certification preferred Valid driver's license required Compensation & Benefits: $60,000-$120,000+ annually , based on experience & performance incentives Sign-On Bonus for experienced techs Medical, Dental, Vision Insurance - employer contributes toward premiums Employer-paid short/long-term disability & life insurance 401(k) with company match Health Savings Account with employer contribution Paid Vacation + 8 Paid Holidays Employee Discounts , including pet insurance & legal/ID protection NO weekends or late nights Paid vacation 6 paid holidays Pet Insurance Employee Discount Program Let's Talk! Call or text for a confidential interview-weekends and evenings welcome! Or apply online and start your journey with Harry Brown's today. PI57065b1107a1-7346
Call and Apply Online Job Description: Fleet Repair Technicians (A and B) AAA is now offering a $1000 Sign On Bonus Are you an experienced Automotive Repair Technician who wants to work a Monday Friday schedule with flexible hours? AAA has a golden opportunity for you to bring your automotive expertise to our dynamic Fleet Repair Team in Philadelphia, PA! AAA is ready to help you achieve your career goal, and we offer an excellent benefits package to ensure your success! Fleet Address: 7777 Brewster Avenue, Philadelphia, PA 19153 We offer our Associates: $1000 Sign On Bonus pay out terms - $500 to be received after 30 days of employment with ACA and $500 after 180 days of employment with ACA A-Level Technicians - $27.61 to $35.24 hourly (ASE Certification Required) B-Level Technicians - $24.64 to $31.45 hourly The base pay range shown is a guideline for compensation and ultimate salary offered will be based on factors such as applicant experience and geographic location. No Flat Rate Plus Monthly Incentive Plan Monday Friday schedule with flexible hours! Occasional weekends! Over 3 weeks of Paid Time Off (PTO) 8 Paid Holidays 401(k) plan with company match up to 7% (first 4% matched at 125%) Medical, Dental, Vision and Prescription Coverage FREE Life Insurance FREE AAA Membership Tuition Reimbursement Paid uniforms, paid training/ASE Certifications Spacious, clean, well-lighted and safe work environment with state of the art equipment The Fleet Vehicle Mechanic is responsible for: The accurate and timely repair and maintenance of company owned vehicles and customer vehicles, including passenger vehicles and light and medium-duty trucks This includes but is not limited to: engine repair, gas and diesel, automatic transmission/ transaxle diagnosis and repair, manual transmission/transaxle diagnosis and repair, suspension and steering diagnosis and repair, brakes diagnosis and repair, including ABS/traction control, electrical diagnosis and repair, heating and air conditioning diagnosis and repair, engine performance diagnosis and repair. Complete all paperwork, including, repair information on work orders, information for state and emission inspections, etc., with accuracy Verify repairs are properly completed by re-testing repaired system to ensure proper function and road tests vehicles, as necessary, to identify concerns or validate repair. Maintain in-depth knowledge of specialized skills, and continue to develop additional technical skills, to enable flexibility in work assignments. Other duties as assigned. Minimum Qualifications: High school graduate or equivalent; , Associate s Degree in Automotive Technology desirable. and 3 years applicable experience as an Automotive Technician strongly preferred Ability to accurately repair vehicles using advanced automotive diagnostic equipment and provide technical guidance at a level normally acquired through the completion of six (6) years as an automotive technician. National Institute of Automotive Service Excellence (ASE) or Manufacturer Certification as a Master Automotive Technician , or the equivalent knowledge and experience with the ability to attain the required certifications within 12 months of hire. State Safety and Emissions license- as required by state location Freon handling license for R12 and 134A refrigerant. Must possess and maintain a valid driver's license with an excellent driving record and the ability to operate passenger vehicles and light/medium duty trucks with automatic and manual transmissions. Ability to pass a physical examination required by the Department of Transportation and must obtain and maintain the certificate for the duration of employment in the position. Full time Associates are offered a comprehensive benefits package that includes: Medical, Dental, and Vision plan options Up to 2 weeks Paid parental leave 401k plan with company match up to 7% 2 weeks of PTO within your first year Paid company holidays Company provided volunteer opportunities 1 volunteer day per year Free AAA Membership Continual learning reimbursement up to $5,250 per year And MORE! ACA is an equal opportunity employer and complies with all applicable federal, state, and local employment practices laws. At ACA, we are committed to cultivating a welcoming and inclusive workplace of team members with diverse backgrounds and experiences to enable us to meet our goals and support our values while serving our Members and customers. We strive to attract and retain candidates with a passion for their work and we encourage all qualified individuals to apply. It is ACA s policy to employ the best qualified individuals available for all positions. Hiring decisions are based upon ACA s operating needs, and applicant qualifications including, but not limited to, experience, skills, ability, availability, cooperation, and job performance. Call and Apply Online
05/16/2026
Full time
Call and Apply Online Job Description: Fleet Repair Technicians (A and B) AAA is now offering a $1000 Sign On Bonus Are you an experienced Automotive Repair Technician who wants to work a Monday Friday schedule with flexible hours? AAA has a golden opportunity for you to bring your automotive expertise to our dynamic Fleet Repair Team in Philadelphia, PA! AAA is ready to help you achieve your career goal, and we offer an excellent benefits package to ensure your success! Fleet Address: 7777 Brewster Avenue, Philadelphia, PA 19153 We offer our Associates: $1000 Sign On Bonus pay out terms - $500 to be received after 30 days of employment with ACA and $500 after 180 days of employment with ACA A-Level Technicians - $27.61 to $35.24 hourly (ASE Certification Required) B-Level Technicians - $24.64 to $31.45 hourly The base pay range shown is a guideline for compensation and ultimate salary offered will be based on factors such as applicant experience and geographic location. No Flat Rate Plus Monthly Incentive Plan Monday Friday schedule with flexible hours! Occasional weekends! Over 3 weeks of Paid Time Off (PTO) 8 Paid Holidays 401(k) plan with company match up to 7% (first 4% matched at 125%) Medical, Dental, Vision and Prescription Coverage FREE Life Insurance FREE AAA Membership Tuition Reimbursement Paid uniforms, paid training/ASE Certifications Spacious, clean, well-lighted and safe work environment with state of the art equipment The Fleet Vehicle Mechanic is responsible for: The accurate and timely repair and maintenance of company owned vehicles and customer vehicles, including passenger vehicles and light and medium-duty trucks This includes but is not limited to: engine repair, gas and diesel, automatic transmission/ transaxle diagnosis and repair, manual transmission/transaxle diagnosis and repair, suspension and steering diagnosis and repair, brakes diagnosis and repair, including ABS/traction control, electrical diagnosis and repair, heating and air conditioning diagnosis and repair, engine performance diagnosis and repair. Complete all paperwork, including, repair information on work orders, information for state and emission inspections, etc., with accuracy Verify repairs are properly completed by re-testing repaired system to ensure proper function and road tests vehicles, as necessary, to identify concerns or validate repair. Maintain in-depth knowledge of specialized skills, and continue to develop additional technical skills, to enable flexibility in work assignments. Other duties as assigned. Minimum Qualifications: High school graduate or equivalent; , Associate s Degree in Automotive Technology desirable. and 3 years applicable experience as an Automotive Technician strongly preferred Ability to accurately repair vehicles using advanced automotive diagnostic equipment and provide technical guidance at a level normally acquired through the completion of six (6) years as an automotive technician. National Institute of Automotive Service Excellence (ASE) or Manufacturer Certification as a Master Automotive Technician , or the equivalent knowledge and experience with the ability to attain the required certifications within 12 months of hire. State Safety and Emissions license- as required by state location Freon handling license for R12 and 134A refrigerant. Must possess and maintain a valid driver's license with an excellent driving record and the ability to operate passenger vehicles and light/medium duty trucks with automatic and manual transmissions. Ability to pass a physical examination required by the Department of Transportation and must obtain and maintain the certificate for the duration of employment in the position. Full time Associates are offered a comprehensive benefits package that includes: Medical, Dental, and Vision plan options Up to 2 weeks Paid parental leave 401k plan with company match up to 7% 2 weeks of PTO within your first year Paid company holidays Company provided volunteer opportunities 1 volunteer day per year Free AAA Membership Continual learning reimbursement up to $5,250 per year And MORE! ACA is an equal opportunity employer and complies with all applicable federal, state, and local employment practices laws. At ACA, we are committed to cultivating a welcoming and inclusive workplace of team members with diverse backgrounds and experiences to enable us to meet our goals and support our values while serving our Members and customers. We strive to attract and retain candidates with a passion for their work and we encourage all qualified individuals to apply. It is ACA s policy to employ the best qualified individuals available for all positions. Hiring decisions are based upon ACA s operating needs, and applicant qualifications including, but not limited to, experience, skills, ability, availability, cooperation, and job performance. Call and Apply Online
Sign-On Bonus for New Hires: up to $3,500 Pay: up to $27.26-$33.96 per hour, based on experience 3rd Shift available $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technicians in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to perform diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment (Tractors, Trailers, Convertor Dollies, Lift Gates, Light Duty Vehicles) to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet to include, but not limited to First Article Inspection (FAI)/Commercial Vehicle Inspection (CVI) (Annual) Inspections, Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment, perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles and any company-owned equipment. Perform maintenance repairs on all vehicles such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, and quality manner, addressing all Driver Vehicle Inspection Report (VIR) write-ups timely, efficiently and correctly the first time, diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, Heating, Ventilation, and Air Conditioning (HVAC) systems and lift-gate hydraulic, mechanical and electrical systems. Document all work performed on Work Order (SAP) using Complaint, Cause, and Correction Format. Learn and develop efficiency in all Maintenance Relates Sysco Computer programs. QUALIFICATIONS Education High school diploma or equivalent. Medium/Heavy Duty truck technical training 2-year school. Experience Either, 1 Year Experience with 2 Year Technical Degree or 3 years experience in Fleet Maintenance and Repair. Certificates, Licenses, and Registrations ASE Certification ' Automotive or Medium/Heavy Duty. Current and Valid Drivers License, CDL-A Preferred. Annual Inspector Certification Knowledge Skills and Abilities. Brake Inspector Certification Knowledge Skills and Abilities. Professional Skills Basic Knowledge and skill of all vehicle systems and Components. Knowledge and skill in the diagnosis and repair of electrical systems on all equipment. Understanding and skill in welding and cutting (gas, electric, MIG, TIG). Working knowledge of Computer-based diagnostic software for OEM component mfg Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical demands to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear, climb, balance, stoop, kneel, crouch, bend and crawl Vision abilities to include Close & Distance vision, color, peripheral vision, depth perception and ability to adjust focus The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
05/15/2026
Full time
Sign-On Bonus for New Hires: up to $3,500 Pay: up to $27.26-$33.96 per hour, based on experience 3rd Shift available $600 Annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To assist Fleet Technicians in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to perform diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment (Tractors, Trailers, Convertor Dollies, Lift Gates, Light Duty Vehicles) to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet to include, but not limited to First Article Inspection (FAI)/Commercial Vehicle Inspection (CVI) (Annual) Inspections, Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment, perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles and any company-owned equipment. Perform maintenance repairs on all vehicles such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, and quality manner, addressing all Driver Vehicle Inspection Report (VIR) write-ups timely, efficiently and correctly the first time, diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, Heating, Ventilation, and Air Conditioning (HVAC) systems and lift-gate hydraulic, mechanical and electrical systems. Document all work performed on Work Order (SAP) using Complaint, Cause, and Correction Format. Learn and develop efficiency in all Maintenance Relates Sysco Computer programs. QUALIFICATIONS Education High school diploma or equivalent. Medium/Heavy Duty truck technical training 2-year school. Experience Either, 1 Year Experience with 2 Year Technical Degree or 3 years experience in Fleet Maintenance and Repair. Certificates, Licenses, and Registrations ASE Certification ' Automotive or Medium/Heavy Duty. Current and Valid Drivers License, CDL-A Preferred. Annual Inspector Certification Knowledge Skills and Abilities. Brake Inspector Certification Knowledge Skills and Abilities. Professional Skills Basic Knowledge and skill of all vehicle systems and Components. Knowledge and skill in the diagnosis and repair of electrical systems on all equipment. Understanding and skill in welding and cutting (gas, electric, MIG, TIG). Working knowledge of Computer-based diagnostic software for OEM component mfg Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical demands to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear, climb, balance, stoop, kneel, crouch, bend and crawl Vision abilities to include Close & Distance vision, color, peripheral vision, depth perception and ability to adjust focus The above information on this description has been designed to indicate the general nature and level of work performed by associates within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Sign-On Bonus for New Hires: up to $7,500 Pay: up to $35-$42.21 per hour, based on experience Shifts: Sun-Wed 7pm-5:30am. Shift Differential of $2 per hour depending on shift start time $600 annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Preferred Education High school diploma or GED Current and valid driver's license (CDL Preferred, Not Required) Preferred Experience 5 years of experience in fleet maintenance and repair OR Medium / Heavy Duty truck technical training 2-year school and 4 years of experience Preferred Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
05/15/2026
Full time
Sign-On Bonus for New Hires: up to $7,500 Pay: up to $35-$42.21 per hour, based on experience Shifts: Sun-Wed 7pm-5:30am. Shift Differential of $2 per hour depending on shift start time $600 annual Tool Allowance Annual Boot Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (Reefer), lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Perform preventive maintenance, diagnosis and repair to refrigeration units (Reefer). Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility. May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible. Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Preferred Education High school diploma or GED Current and valid driver's license (CDL Preferred, Not Required) Preferred Experience 5 years of experience in fleet maintenance and repair OR Medium / Heavy Duty truck technical training 2-year school and 4 years of experience Preferred Certifications, Licenses and/or Registrations Annual Inspector Certification Knowledge, Skills and Abilities Brake Inspector Certification Knowledge, Skills and Abilities ASE certifications & Automotive or Medium/Heavy Duty Trucks EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification Professional Skills Expert knowledge and skill of all vehicle systems and components Expert knowledge and skill in diagnosis and repair of electrical systems on all equipment Expert knowledge and skill in diagnosis and repair of refrigeration systems ( Expert knowledge and skill in Preventive Maintenance Inspections and repair Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Moderate computer skills and knowledge Expert knowledge of all DOT (FMCSA) regulations Moderate knowledge of OSHA safety regulations Moderate knowledge of environmental regulations Working knowledge of computer-based diagnostic software for OEM's and component manufacturers The technician must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Working conditions: Frequently works outdoors. Working Conditions While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.
Sign-On Bonus for New Hires: up to $7,500 Pay: up to $23.00- $28.00 per hour, based on experience 2nd or 3rd Shift available $2 Shift Differential Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
05/10/2026
Full time
Sign-On Bonus for New Hires: up to $7,500 Pay: up to $23.00- $28.00 per hour, based on experience 2nd or 3rd Shift available $2 Shift Differential Annual Boot and Tool Allowance Outstanding benefits: Excellent full-time career with a stable and growing company Move your career FORWARD with Sysco Foods! JOB SUMMARY To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies). Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment. Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment. Address all Driver Vehicle Inspection Report write ups timely, and efficiently. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems. Follow procedures including documenting all work performed on work orders. Learn and develop efficiency in Sysco computer programs Proficient in electrical meter testing Knowledge of controls and electric (DC (distribution center) low voltage Electric motor knowledge (DC) Complete electrical repairs and welding projects as needed. QUALIFICATIONS Education Medium / Heavy Duty truck technical training High school diploma or GED required Experience 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair Current and valid driver's license. Certifications, Licenses, and Registrations Annual Inspector Certification, Knowledge, Skills, and Abilities Brake Inspector Certification, Knowledge, Skills and Abilities ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification Professional Skills Working knowledge of computer-based diagnostic software for OEM's and component manufacturers Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics Expert knowledge and skill of all vehicle systems and components Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment Moderate knowledge and skill in Preventive Maintenance Inspections and repair Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Moderate knowledge of all DOT (FMCSA) regulations Basic knowledge of OSHA safety regulations Basic knowledge of environmental regulations The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Ability to operate various pieces of equipment Ability to stand, sit, walk, bend, reach Ability to push/pull Ability to lift /carry Ability to grasp tools Ability to perform Repetitive motion: wrenches and hand tools Physical Demands While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs. Work Environment While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Frequently works outdoors.
