87 jobs found

TITLE: Shift Manager (SM) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a full time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details

TITLE: Shift Leader (SL) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details

TITLE: Shift Manager (SM) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a full time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details

TITLE: Shift Leader (SL) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a part time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details

TITLE: Shift Manager (SM) PURPOSE OF THE POSITION: The person holding this supervisory position is considered a full time team member and is responsible and accountable for: the daily operation of the restaurant, assisting the RGM with hiring and training team members, directing the activities of team members, and rewarding or disciplining team members in consultation with the RGM; and, performing these functions in ways that assure compliance with all Company policies and procedures, customer satisfaction, a high level of team member morale and the attainment of sales and profit objectives. The Shift Manager reports directly to the RGM, and holds the second highest position in the restaurant if there is not an Assistant Manager. In restaurants with an Assistant Manager, the Shift Manager is the next highest position. ESSENTIAL FUNCTIONS: The following accountabilities are essential to this position and a high degree of performance must be achieved in each in order for the incumbent to be successful. These accountabilities are organized according to our six Key Result Areas. When the word "policies" or the phrase "policies and procedures" or similar language is used in any of the Company's documents, the term refers to all policy and procedure bulletins, manuals, training materials, memoranda, newsletters, communications on the "Document Viewer" on the computer, and all other documents and oral discussions with team members' supervisors, which relate to the restaurant. The management team shall be responsible for ensuring that all team members, including the manager himself/herself, comply with all Company policies and procedures and all Pizza Hut standards at all times and take immediate steps to correct actions not in accordance with such policies, procedures and standards. I. PROFITABILITY A.Planning 1.Executes the RGM's plans and overall Daland Corporation plans to achieve consistent sales growth and profit growth. 2.Achieves planned/budgeted profits, as communicated by the RGM. This involves: - a.Using established control systems and procedures to measure actual results and to identify deviations from planned results. - b.Assisting the RGM, as requested, in developing and implementing corrective action plans to assure actual results conform to plan. B.Policies: Complies with all Company policies and procedures, including but not limited to, those relating to inventory, cash, payroll, food handling, interactions with guests, team members, and vendors, and legal compliance. C.Manages and Controls Cash: In conjunction with the RGM and other managers, ensures that that all cash and checks, minus the change fund is correctly deposited, credit card transactions are correctly settled, and cash over or short is minimized. 1. Performs Banking Transactions - a. Assures that two deposits daily are prepared and deposited in the bank (more than two may be required in higher volume units.) - i. The intent of the first deposit is to remove from the unit an amount approximately equal to the total of cash plus checks, minus the amount of the change fund. - ii. The first deposit is to be made after 4:00 p.m., when the opening manager is ready to leave for the day. - iii. The final deposit will be all remaining cash plus checks, minus the change fund. - iv. The managers may take such deposits to the bank, using his/her personal vehicle, and depending on the time of day, make the deposit in the bank lobby or in the night depository. - v. Assure the "Weekly Deposit Log" is completed for each deposit made. - b. If requested by the RGM, the other managers shall perform the following tasks. These are the responsibility of the RGM, but may be delegated to other managers. - i. Picks up validated deposit slips at the bank. - ii. Verifies bank validated deposit amounts to sales and cash reports as well as the "Weekly Deposit Log," and assures all appropriate signatures are on the "Weekly Deposit Log". - iii. Sends a copy of the "Weekly Deposit Log" to the Home Office with all other weekly paperwork. D.Controls cash drawers and team member "banks", following all established manual and computer procedures. 1. Establishes the correct number of cash drawers. Number of cash drawers in use at one time may vary from one to four depending on size of the restaurant, sales volume, method of delivering services to customer. Amount of cash in each drawer is recorded and kept in the drawer for the duration of the shift, or until "dropped" from the cash drawer to the safe. 2. Establishes cash banks for delivery drivers. 3. As needed, will operate cash drawer following established procedures for cash drawer operation. 4. As necessary, money is removed from cash drawers from time to time and secured in the safe. 5. Throughout the shift, cash drawer transactions, such as paid outs, miscellaneous receipts (paid ins), discounts and promotions are properly accounted for, including all documentation; transactions are properly entered into the computer; and, all documentation is organized and secured for transmitting to the Home Office. 6. Assures cash drawers are counted and balanced at the end of each shift or when there is a change in cashiers. 7. Records tips for servers and drivers on credit card/gift card transactions and correctly settles all credit card/gift card transactions. 8. Inform the RGM anytime cash short exceeds $5 for a day. 9. Reviews reports and otherwise takes actions to ensure that team members properly report actual sales and actual tips, and ensures that team members do not falsify credit card receipts or other Company documents. This requires due diligence on the part of the managers. E.Assists the RGM in Managing and Controlling Cost of Sales: The actual cost per the P&L must be equal to or between Ideal Cost and Allowable Cost as calculated in the Product Cost Analysis report and Bonus Calculation Sheet. This includes these processes: 1.Utilizes manuals and/or automated procedures approved by the Company, orders all approved products used in the restaurant. 2.Properly accepts deliveries and properly stores inventory items used in the restaurant. This involves these processes: - a.Checks in products as received off of delivery vehicles to verity product quality and verifies that amounts charged for on delivery receipt/packing slips are for amount of goods received. - b.Uses a two-wheeled hand truck to unload and products, assists and oversees other team members in proper storage of products. Weight of items varies from 10 to 50 pounds. Full load on two-wheeled hand truck may exceed 500 pounds. Generally, ensures that more than one person is available to perform this task. - c."Autoposts" inventory received, or enters on inventory record the amount and cost of each product item received, as noted on delivery receipt/packing slip. 3.Accurately accounts for all product coming into the restaurant, used to prepare products, or transferred out of the restaurant. 4.Assures the proper execution of all recipes and specifications for preparing ingredients and assembling products. 5.Manages waste which involves maintaining a FIFO (First In, First Out) system and marking all products with a Made - Ready - Discard label. 6.Assures the correct order entry procedures are followed by all order takers. 7.Assures compliance with team member consumption policies. 8.Performs a Daily Product Usage Analysis on critical inventory items to assure usage meets guidelines. 9.Communicates goals to team members and follows up with team members to ensure goals are being met. 10.The following tools are used to aid in controlling Cost of Sales: - FMS Product Cost Analysis Report - FMS Daily Ideal Usage Report - FMS Weekly Worksheet Report - Bonus Calculation Sheet - Profit and Loss Statement - The General Ledger - Prep Variance Report - Daily Prep Variance Report F.Assists the RGM in Managing and Controlling Cost of Labor: Ensures that "Flow-thru" targets/goals are achieved; actual hours used do not exceed the established labor model/matrix; and, team member productivity is maximized. This includes these processes:. 1.Ensuring the accuracy and completeness of team member timekeeping records, including tips and team member meals. Updates team member records as needed. 2. Minimizing edits to clock-in/clock-out transactions by assuring team members properly clock in at the beginning of their shift and clock out at the end of their shift. 3. Assuring team members do not clock in earlier than five (5) minutes prior to their scheduled shift. 4. Assuring the man-hours used for opening and closing the restaurant do not exceed established targets. 5.Analyzing actual labor hours used versus earned allowable labor hours and calculating the variance; and, using this information to appropriately manage labor each shift. 6.Communicating and cooperating with the Home Office Payroll Department to assure accuracy in payroll, including information about new hires, raises, promotions, and terminations. 7.Making appropriate recommendations to the RGM regarding wages within Company guidelines. 8.Eliminating overtime hours for team members who are paid on an hourly basis. 9.Eliminating supplemental tip credit pay. 10.Improving team member productivity using the measurements and tools available through the Company, as well as the following: - Assuring the Back of the House (BOH) is "optimized": - i. Organized a place for everything, and everything in its place - ii. Lineal Flow eliminate or minimize back tracking - iii. Have all items located closest to the next step in the product assembly process - iv. Minimize the number of steps taken and the reach needed for all items - Assuring that team members are thoroughly trained. - Ensuring that "prep levels' are adequate for the forecasted volume of business for the day . click apply for full job details

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.