65 jobs found

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Description: We are looking for a detail-oriented and energetic Receiving Warehouse Clerk to join our 1st Shift team in Arden, NC. In this role, you will play a key role in maintaining accurate inventory records, receiving raw materials, and supporting our warehouse operations. What We Do: Arcadia is a people-first organization. We exist to care for each other through our actions and values, and to share that with everyone we encounter. Arcadia Beverage has over 80 years of beverage co-packing experience, and we are a pasteurized cold fill scale contract packager of non-alcoholic / non-carbonated beverages for major retailers and food service distributors. Our Core Values: Care Deeply Respect & Support the Whole Person Grow & Learn Every Day Celebrate & Have Fun Do What We Say We're Going to Do Requirements: What You'll Do: Accurately receive, inspect, and record incoming shipments of raw materials and finished products. Receive all shipments electronically into the ERP system. Examine incoming materials to ensure all specifications and quality standards are met. Compare packing lists to company purchase orders and confirm accuracy of received items. Maintain accurate records and assist with inventory control tasks. Support warehouse operations, including safe material handling and organization. Ensure safety, quality, and food safety by following company rules and standards, enforcing requirements, and communicating violations or concerns to the leadership team. What We're Looking For : Minimum 2 years of experience in receiving or warehouse operations. Ability to work safely in a wet, noisy, and non-temperature-controlled environment. Forklift certification or willingness to train. Experience with supply chain, material handling, and ERP systems preferred. Strong written and verbal communication skills. Working knowledge of Microsoft applications. A self-starter with strong prioritization skills and comfort working in a fast-paced, changing environment. Someone committed to personal growth, teamwork, and supporting others. Schedule: Tuesday through Saturday, 10:00 am-6:30 pm The Perks: Generous PTO & Holidays 401(k) plan with employer match Comprehensive Medical, Dental & Vision Insurance Company-funded Direct Primary Care Life & Disability Insurance Professional development opportunities The Interview Process: Initial phone screen with Human Resources On-site interview to tour the facility and meet the team Offer Ready to Join Us? If you're ready to bring your strengths, attention to detail, and passion for growth to Arcadia Beverage, we'd love to meet you! Join us on our refreshing journey and help us continue to build something great. Apply today: Compensation details: 19-22.1 Hourly Wage PI9bbf10e1e53d-1717

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Description: Custom Engineering Co. is a premier single source supplier specializing in the manufacturing of large-scale metal fabrications. We are currently seeking 1st and 2nd shift Full-time Machine Operator with experience in the steel industry to join our team at our Erie, PA location. The position offers an hourly rate of up to $22.00 BOE ($2.00 2nd shift differential) and the benefits shown below. By joining our team, you will be exposed to years of expertise and gain industry knowledge and experience that can lead to performance-based growth within the organization. BENEFITS OF THE MACHINE OPERATOR Vacation: 80 hours to start 10 paid holidays Profit sharing 401K with the company matching 50% on the first 6% of wages Health, dental, vision, life, disability, FSA Highly rated by employees on Indeed/Glassdoor/Facebook Company Events: annual picnic, golf outing, pizza parties, etc. MACHINE OPERATOR RESPONSIBILITIES: (Included, but not limited to) Set up and remove work pieces from a machine per procedure Proficiently use measuring instruments such as calipers, micrometers, dial indicators and gauges to ensure conformance of specified tolerances Ability to perform in-process inspections at a machine and adjust various offsets to ensure conformance of workpieces as required Position and secure workpieces on machines using measuring instruments, holding devices, hand tools, and cranes Study blueprints, lay outs, sketches, and work orders to determine tolerances and work procedures Ability to recognize tooling types facemill, drill, taps, etc. Requirements: Knowledge of addition, subtraction, fractions, decimals and calculate tooling speeds/feeds Prior machining experience Knowledge in general machining practices Crane and forklift experience Ability to read and understand documents and blueprints Ability to use hand tools (calipers, micrometers, dial indicators, tape measure, etc.) Ability to lift 50 pounds to insert tooling, materials, and use lifting devices Compensation details: 17-20 Hourly Wage PIdae1dfabd78b-6524

Description: Shifts 5:00 AM to 5:30 PM 5:00 PM to 5:30 AM SUMMARY Set up and operate machine tools such as pressing, planning, sawing, grinding, and weigh material, to machine nonmetallic work pieces by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Read and follow Job order for product specifications such as dimensions, tolerances, and pounds, machining instruction such as feed rate, cutting speeds, closing speeds and determine sequence of operations. Document and keep logs, routings and various forms updated. Fill bags with resin to required weight and stage at the proper location. Scrap, clean, spray mold release, fill, and level the press. Sort and test material to ensure it is UHMW-PE prior to grinding, milling and putting in stock. Load chipper with correct materials. Set up and operate the CNC saw and planer, pull the required quantity of sheets, ensure the part numbers are the same, and machine to the specifications of the job traveler. Operate fork lift proficiently. Follow safety regulations. Ensure equipment is properly maintained. Report problems or concerns to supervisor in a timely manner. Teamwork is essential for TSE's continued success, so Teamwork is an essential function of every employee's job. Teamwork drives positive results every day. Teamwork promotes positive customer relations and results in exceeding the expectations of our customers. Teamwork benefits every employee since it grows our business and increases our sales. With Teamwork, we all succeed. Without it, we all suffer. Teamwork with co-workers in the same department is just the beginning. Teamwork with every other employee, department and division is the Teamwork that is required to succeed. WE ARE TSE. Requirements: CERTIFICATES, LICENSES, REGISTRATIONS Must have a valid driver's license. Forklift experience preferred. COMPETENCY To perform this job successfully, an individual should demonstrate the following: Analytical - Synthesize complex or diverse information; collect and research data; use intuition and experience to complement data; design work flows and procedures. Problem Solving - Identify and resolve problems in a timely manner; gather and analyze information skillfully develop alternative solutions' works well in a group problem solving situation; use reason even when dealing with emotional topics. Teamwork - Balance team and individual responsibilities; exhibit objectivity and openness to others' views; provide and welcome feedback; contribute to building a positive team spirit; place success of team above own interests; able to build morale and group commitments to goals and objectives; support everyone's efforts to succeed. SAFETY TRAINING To perform this job successfully, an individual must complete and maintain the following Safety Training requirements. General Safety Orientation Forklift Safety Training Forklift Certification Training Hazard Communications Training Hearing Protection Training QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on- one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to talk or hear. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl and taste or smell. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to vibration. The noise level in the work environment is usually loud. PI8e298d5-

Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM provides a wide range of building materials to construction professionals, combining the advantages of our national scale with the excellent service levels, expertise, entrepreneurial culture and customer relationships of our local brands. As a people-first company, passionate about continuous improvement, US LBM is proud to provide our associates access to the resources, training and developmental opportunities to empower them to succeed today, while growing professionally and preparing for the challenges of tomorrow. The CDL Driver I delivers materials to job site, inspects and maintains truck, reports shortages and claims to supervisor and assists in loading and storing of materials. Typically, driving a truck with a capacity of more than three tons, but may be a less experienced CDL or tractor trailer driver. What you will do • Operate safely. • Participate in a positive work environment. • Maintain a current Class A or B Commercial Driver's License as required. • Prepare DOT required log of time on duty and driving. • Organize and secure load. • Assist forklift operators when loading. • Check orders for accuracy. • Deliver and unload materials to customers' satisfaction. • Complete daily equipment pre-inspection. • Record all merchandise that is returned by truck, assist in unloading material returned for credit. • Follow guidelines established by the Department of Transportation. • Provide excellent customer service. • Relay messages sent by customers while on job. • Assist supervisor, other employees and other work areas, as assigned. • Assist in maintaining good housekeeping in yard and warehouse. • Comply with all company policies and guidelines. • Operate truck mounted forklift safely and efficently. • Maintain cleanliness of truck. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or GED required. Experience Qualifications • CDL experience preferred • Basic CDL experience with flat beds and/or tractor trailers required. • 1-3 years CDL experience required for interstate commerce Skills and Abilities • Ability to do basic math, read orders, write instructions and complete forms. • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. • Ability to deal constructively with conflict and recognize potential problems. • Maintain current operator's license and meet company driver qualification requirements. • Knowledge and ability to use safe lifting techniques. • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Licenses and Certifications • Class A CDL License required. • Class B CDL License required. Additional Potential Opportunities based on experience: • CDL Driver II • CDL Long haul • CDL Wide Load • CDL Driver Boom Crane • Non-CDL Driver I • Non-CDL Driver II Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM provides a wide range of building materials to construction professionals, combining the advantages of our national scale with the excellent service levels, expertise, entrepreneurial culture and customer relationships of our local brands. As a people-first company, passionate about continuous improvement, US LBM is proud to provide our associates access to the resources, training and developmental opportunities to empower them to succeed today, while growing professionally and preparing for the challenges of tomorrow. The CDL Driver I delivers materials to job site, inspects and maintains truck, reports shortages and claims to supervisor and assists in loading and storing of materials. Typically, driving a truck with a capacity of more than three tons, but may be a less experienced CDL or tractor trailer driver. What you will do • Operate safely. • Participate in a positive work environment. • Maintain a current Class A or B Commercial Driver's License as required. • Prepare DOT required log of time on duty and driving. • Organize and secure load. • Assist forklift operators when loading. • Check orders for accuracy. • Deliver and unload materials to customers' satisfaction. • Complete daily equipment pre-inspection. • Record all merchandise that is returned by truck, assist in unloading material returned for credit. • Follow guidelines established by the Department of Transportation. • Provide excellent customer service. • Relay messages sent by customers while on job. • Assist supervisor, other employees and other work areas, as assigned. • Assist in maintaining good housekeeping in yard and warehouse. • Comply with all company policies and guidelines. • Operate truck mounted forklift safely and efficently. • Maintain cleanliness of truck. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or GED required. Experience Qualifications • CDL experience preferred • Basic CDL experience with flat beds and/or tractor trailers required. • 1-3 years CDL experience required for interstate commerce Skills and Abilities • Ability to do basic math, read orders, write instructions and complete forms. • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. • Ability to deal constructively with conflict and recognize potential problems. • Maintain current operator's license and meet company driver qualification requirements. • Knowledge and ability to use safe lifting techniques. • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Licenses and Certifications • Class A CDL License required. • Class B CDL License required. Additional Potential Opportunities based on experience: • CDL Driver II • CDL Long haul • CDL Wide Load • CDL Driver Boom Crane • Non-CDL Driver I • Non-CDL Driver II Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM provides a wide range of building materials to construction professionals, combining the advantages of our national scale with the excellent service levels, expertise, entrepreneurial culture and customer relationships of our local brands. As a people-first company, passionate about continuous improvement, US LBM is proud to provide our associates access to the resources, training and developmental opportunities to empower them to succeed today, while growing professionally and preparing for the challenges of tomorrow. The CDL Driver I delivers materials to job site, inspects and maintains truck, reports shortages and claims to supervisor and assists in loading and storing of materials. Typically, driving a truck with a capacity of more than three tons, but may be a less experienced CDL or tractor trailer driver. What you will do • Operate safely. • Participate in a positive work environment. • Maintain a current Class A or B Commercial Driver's License as required. • Prepare DOT required log of time on duty and driving. • Organize and secure load. • Assist forklift operators when loading. • Check orders for accuracy. • Deliver and unload materials to customers' satisfaction. • Complete daily equipment pre-inspection. • Record all merchandise that is returned by truck, assist in unloading material returned for credit. • Follow guidelines established by the Department of Transportation. • Provide excellent customer service. • Relay messages sent by customers while on job. • Assist supervisor, other employees and other work areas, as assigned. • Assist in maintaining good housekeeping in yard and warehouse. • Comply with all company policies and guidelines. • Operate truck mounted forklift safely and efficently. • Maintain cleanliness of truck. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or GED required. Experience Qualifications • CDL experience preferred • Basic CDL experience with flat beds and/or tractor trailers required. • 1-3 years CDL experience required for interstate commerce Skills and Abilities • Ability to do basic math, read orders, write instructions and complete forms. • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. • Ability to deal constructively with conflict and recognize potential problems. • Maintain current operator's license and meet company driver qualification requirements. • Knowledge and ability to use safe lifting techniques. • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Licenses and Certifications • Class A CDL License required. • Class B CDL License required. Additional Potential Opportunities based on experience: • CDL Driver II • CDL Long haul • CDL Wide Load • CDL Driver Boom Crane • Non-CDL Driver I • Non-CDL Driver II Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM provides a wide range of building materials to construction professionals, combining the advantages of our national scale with the excellent service levels, expertise, entrepreneurial culture and customer relationships of our local brands. As a people-first company, passionate about continuous improvement, US LBM is proud to provide our associates access to the resources, training and developmental opportunities to empower them to succeed today, while growing professionally and preparing for the challenges of tomorrow. The CDL Driver I delivers materials to job site, inspects and maintains truck, reports shortages and claims to supervisor and assists in loading and storing of materials. Typically, driving a truck with a capacity of more than three tons, but may be a less experienced CDL or tractor trailer driver. What you will do • Operate safely. • Participate in a positive work environment. • Maintain a current Class A or B Commercial Driver's License as required. • Prepare DOT required log of time on duty and driving. • Organize and secure load. • Assist forklift operators when loading. • Check orders for accuracy. • Deliver and unload materials to customers' satisfaction. • Complete daily equipment pre-inspection. • Record all merchandise that is returned by truck, assist in unloading material returned for credit. • Follow guidelines established by the Department of Transportation. • Provide excellent customer service. • Relay messages sent by customers while on job. • Assist supervisor, other employees and other work areas, as assigned. • Assist in maintaining good housekeeping in yard and warehouse. • Comply with all company policies and guidelines. • Operate truck mounted forklift safely and efficently. • Maintain cleanliness of truck. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or GED required. Experience Qualifications • CDL experience preferred • Basic CDL experience with flat beds and/or tractor trailers required. • 1-3 years CDL experience required for interstate commerce Skills and Abilities • Ability to do basic math, read orders, write instructions and complete forms. • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. • Ability to deal constructively with conflict and recognize potential problems. • Maintain current operator's license and meet company driver qualification requirements. • Knowledge and ability to use safe lifting techniques. • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Licenses and Certifications • Class A CDL License required. • Class B CDL License required. Additional Potential Opportunities based on experience: • CDL Driver II • CDL Long haul • CDL Wide Load • CDL Driver Boom Crane • Non-CDL Driver I • Non-CDL Driver II Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM provides a wide range of building materials to construction professionals, combining the advantages of our national scale with the excellent service levels, expertise, entrepreneurial culture and customer relationships of our local brands. As a people-first company, passionate about continuous improvement, US LBM is proud to provide our associates access to the resources, training and developmental opportunities to empower them to succeed today, while growing professionally and preparing for the challenges of tomorrow. The CDL Driver I delivers materials to job site, inspects and maintains truck, reports shortages and claims to supervisor and assists in loading and storing of materials. Typically, driving a truck with a capacity of more than three tons, but may be a less experienced CDL or tractor trailer driver. What you will do • Operate safely. • Participate in a positive work environment. • Maintain a current Class A or B Commercial Driver's License as required. • Prepare DOT required log of time on duty and driving. • Organize and secure load. • Assist forklift operators when loading. • Check orders for accuracy. • Deliver and unload materials to customers' satisfaction. • Complete daily equipment pre-inspection. • Record all merchandise that is returned by truck, assist in unloading material returned for credit. • Follow guidelines established by the Department of Transportation. • Provide excellent customer service. • Relay messages sent by customers while on job. • Assist supervisor, other employees and other work areas, as assigned. • Assist in maintaining good housekeeping in yard and warehouse. • Comply with all company policies and guidelines. • Operate truck mounted forklift safely and efficently. • Maintain cleanliness of truck. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or GED required. Experience Qualifications • CDL experience preferred • Basic CDL experience with flat beds and/or tractor trailers required. • 1-3 years CDL experience required for interstate commerce Skills and Abilities • Ability to do basic math, read orders, write instructions and complete forms. • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. • Ability to deal constructively with conflict and recognize potential problems. • Maintain current operator's license and meet company driver qualification requirements. • Knowledge and ability to use safe lifting techniques. • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Licenses and Certifications • Class A CDL License required. • Class B CDL License required. Additional Potential Opportunities based on experience: • CDL Driver II • CDL Long haul • CDL Wide Load • CDL Driver Boom Crane • Non-CDL Driver I • Non-CDL Driver II Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM provides a wide range of building materials to construction professionals, combining the advantages of our national scale with the excellent service levels, expertise, entrepreneurial culture and customer relationships of our local brands. As a people-first company, passionate about continuous improvement, US LBM is proud to provide our associates access to the resources, training and developmental opportunities to empower them to succeed today, while growing professionally and preparing for the challenges of tomorrow. The CDL Driver I delivers materials to job site, inspects and maintains truck, reports shortages and claims to supervisor and assists in loading and storing of materials. Typically, driving a truck with a capacity of more than three tons, but may be a less experienced CDL or tractor trailer driver. What you will do • Operate safely. • Participate in a positive work environment. • Maintain a current Class A or B Commercial Driver's License as required. • Prepare DOT required log of time on duty and driving. • Organize and secure load. • Assist forklift operators when loading. • Check orders for accuracy. • Deliver and unload materials to customers' satisfaction. • Complete daily equipment pre-inspection. • Record all merchandise that is returned by truck, assist in unloading material returned for credit. • Follow guidelines established by the Department of Transportation. • Provide excellent customer service. • Relay messages sent by customers while on job. • Assist supervisor, other employees and other work areas, as assigned. • Assist in maintaining good housekeeping in yard and warehouse. • Comply with all company policies and guidelines. • Operate truck mounted forklift safely and efficently. • Maintain cleanliness of truck. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or GED required. Experience Qualifications • CDL experience preferred • Basic CDL experience with flat beds and/or tractor trailers required. • 1-3 years CDL experience required for interstate commerce Skills and Abilities • Ability to do basic math, read orders, write instructions and complete forms. • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. • Ability to deal constructively with conflict and recognize potential problems. • Maintain current operator's license and meet company driver qualification requirements. • Knowledge and ability to use safe lifting techniques. • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Licenses and Certifications • Class A CDL License required. • Class B CDL License required. Additional Potential Opportunities based on experience: • CDL Driver II • CDL Long haul • CDL Wide Load • CDL Driver Boom Crane • Non-CDL Driver I • Non-CDL Driver II Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM provides a wide range of building materials to construction professionals, combining the advantages of our national scale with the excellent service levels, expertise, entrepreneurial culture and customer relationships of our local brands. As a people-first company, passionate about continuous improvement, US LBM is proud to provide our associates access to the resources, training and developmental opportunities to empower them to succeed today, while growing professionally and preparing for the challenges of tomorrow. The CDL Driver I delivers materials to job site, inspects and maintains truck, reports shortages and claims to supervisor and assists in loading and storing of materials. Typically, driving a truck with a capacity of more than three tons, but may be a less experienced CDL or tractor trailer driver. What you will do • Operate safely. • Participate in a positive work environment. • Maintain a current Class A or B Commercial Driver's License as required. • Prepare DOT required log of time on duty and driving. • Organize and secure load. • Assist forklift operators when loading. • Check orders for accuracy. • Deliver and unload materials to customers' satisfaction. • Complete daily equipment pre-inspection. • Record all merchandise that is returned by truck, assist in unloading material returned for credit. • Follow guidelines established by the Department of Transportation. • Provide excellent customer service. • Relay messages sent by customers while on job. • Assist supervisor, other employees and other work areas, as assigned. • Assist in maintaining good housekeeping in yard and warehouse. • Comply with all company policies and guidelines. • Operate truck mounted forklift safely and efficently. • Maintain cleanliness of truck. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or GED required. Experience Qualifications • CDL experience preferred • Basic CDL experience with flat beds and/or tractor trailers required. • 1-3 years CDL experience required for interstate commerce Skills and Abilities • Ability to do basic math, read orders, write instructions and complete forms. • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. • Ability to deal constructively with conflict and recognize potential problems. • Maintain current operator's license and meet company driver qualification requirements. • Knowledge and ability to use safe lifting techniques. • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Licenses and Certifications • Class A CDL License required. • Class B CDL License required. Additional Potential Opportunities based on experience: • CDL Driver II • CDL Long haul • CDL Wide Load • CDL Driver Boom Crane • Non-CDL Driver I • Non-CDL Driver II Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM provides a wide range of building materials to construction professionals, combining the advantages of our national scale with the excellent service levels, expertise, entrepreneurial culture and customer relationships of our local brands. As a people-first company, passionate about continuous improvement, US LBM is proud to provide our associates access to the resources, training and developmental opportunities to empower them to succeed today, while growing professionally and preparing for the challenges of tomorrow. The CDL Driver I delivers materials to job site, inspects and maintains truck, reports shortages and claims to supervisor and assists in loading and storing of materials. Typically, driving a truck with a capacity of more than three tons, but may be a less experienced CDL or tractor trailer driver. What you will do • Operate safely. • Participate in a positive work environment. • Maintain a current Class A or B Commercial Driver's License as required. • Prepare DOT required log of time on duty and driving. • Organize and secure load. • Assist forklift operators when loading. • Check orders for accuracy. • Deliver and unload materials to customers' satisfaction. • Complete daily equipment pre-inspection. • Record all merchandise that is returned by truck, assist in unloading material returned for credit. • Follow guidelines established by the Department of Transportation. • Provide excellent customer service. • Relay messages sent by customers while on job. • Assist supervisor, other employees and other work areas, as assigned. • Assist in maintaining good housekeeping in yard and warehouse. • Comply with all company policies and guidelines. • Operate truck mounted forklift safely and efficently. • Maintain cleanliness of truck. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or GED required. Experience Qualifications • CDL experience preferred • Basic CDL experience with flat beds and/or tractor trailers required. • 1-3 years CDL experience required for interstate commerce Skills and Abilities • Ability to do basic math, read orders, write instructions and complete forms. • Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. • Ability to deal constructively with conflict and recognize potential problems. • Maintain current operator's license and meet company driver qualification requirements. • Knowledge and ability to use safe lifting techniques. • Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Licenses and Certifications • Class A CDL License required. • Class B CDL License required. Additional Potential Opportunities based on experience: • CDL Driver II • CDL Long haul • CDL Wide Load • CDL Driver Boom Crane • Non-CDL Driver I • Non-CDL Driver II Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM provides a wide range of building materials to construction professionals, combining the advantages of our national scale with the excellent service levels, expertise, entrepreneurial culture and customer relationships of our local brands. As a people-first company, passionate about continuous improvement, US LBM is proud to provide our associates access to the resources, training and developmental opportunities to empower them to succeed today, while growing professionally and preparing for the challenges of tomorrow. A Brief Overview The CDL Driver I is responsible for the safe, efficient transportation of materials to various job sites and other locations. This role requires maintaining a Class A or B Driver's license, inspecting and maintaining trucks, reporting shortages and claims to supervisors, and assisting in loading and storing of materials. Drivers must perform pre- and post-trip inspections, manage logs, and adhere to hours-of-service requirements. US LBM will provide and pay for Boom Crane training, with the expectation that it be completed within 60 days of start date. Pay Rate: $26.00 - $34.00 per hour What you will do Operates Class A or B commercial vehicles in a safe, compliant, and efficient manner. Responsible for deliveries to both active construction sites and completed build locations; city-based deliveries and inter-state travel may be required. Performs thorough pre-trip and post-trip DOT inspections to ensure vehicle safety and compliance with federal regulations. Provides exceptional customer service by maintaining a professional demeanor, addressing client needs, representing the company positively during all interactions, and relaying messages received from customers while on job sites. Organizes and secures loads to ensure safe transport and verifies orders for accuracy before departure and upon delivery. Adheres to all regulations and safety guidelines established by the U.S. Department of Transportation (DOT) and complies with all regulations and conditions outlined in applicable permits. Prepares and maintains accurate DOT-compliant logs of driving hours, on-duty time, and rest periods in accordance with federal regulations. Delivers and unloads materials accurately and safely, ensuring customer satisfaction at the point of delivery. Records all merchandise returned by truck and assists in unloading materials returned for credit, ensuring proper documentation and handling. Safely and efficiently operates a truck-mounted forklift to load, unload, and transport materials at job sites. Maintains the cleanliness and organization of the truck, ensuring it is well-kept and ready for operation. Assist with stocking and organizing inventory in the warehouse and production areas. Required For All Jobs Perform other duties as assigned. Comply with all policies and standards. Adheres to Company's commitment to workplace safety. Education Qualifications High School Diploma or GED required. Experience Qualifications Basic CDL experience with flat beds and/or tractor trailers required. 1-2 years CDL experience preferred. Experience transporting and handling lumber and building materials required. Skills and Abilities Ability to do basic math, read orders, write instructions and complete forms. Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. Ability to deal constructively with conflict and recognize potential problems. Maintain current operator's license and meet company driver qualification requirements. Knowledge and ability to use safe lifting techniques. Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Ability to collaborate effectively with staff, dispatchers, and other drivers to ensure smooth operations and timely deliveries. Knowledge and understanding of federal DOT regulations, logbook requirements, and HOS compliance. Licenses and Certifications Class A CDL License or Class B CDL License required. Additional Potential Opportunities based on experience: CDLDR2 - CDL Driver II CDLLH - CDL Driver Long Haul CDLWL - CDL Wide Load CDLBC - CDL Driver Boom Crane Arrow Building Center, Lampert Lumber and Lyman Lumber Companies, divisions of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.