298 jobs found

About the Job Who We Are: Circuit Check is a high-energy, market-leading, provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary The electronics engineering technician partners with the manufacturing teams and multiple engineering disciplines across the organization in all areas of mechanical and electrical/electronic design. This position reports to the Electrical Integration Manager of the Functional Test group and is classified as non-exempt according the FLSA (Fair Labor Standards Act). What You'll Be Doing The electronics engineering technician conducts, maintains, tests and repairs electrical/electronic, mechanical, hydraulic, and pneumatic systems and components. The position applies knowledge of electrical/electronics and mechanical principles in determining equipment malfunctions and applies skills in restoring equipment to operation. The electronics technician provides skilled mechanical and electrical/electronic support to all areas of manufacturing as well as field service duties. What You Bring to the Table To perform this job successfully, you must be able to perform each essential duty satisfactorily, and regular attendance is required. The requirements listed below are representative of the knowledge, skill, and/or ability required to perform this job. Reasonable accommodation may be made to support individuals with disabilities. Major Areas of Accountability: Troubleshoots and repairs mechanical, hydraulic, pneumatic and electrical/electronic equipment, including programmable controls, numeral controls, power supplies, drives, gages and test equipment Plans and performs work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, writing specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements Informs appropriate management of potential electrical/mechanical problems and inherent dangers involved Maintains company-required performance and maintenance records for identified equipment Performs preventive maintenance functions as directed Assists maintenance personnel with technical troubleshooting Maintain TSE Lab Environment Assists and trains other maintenance and other technical-level employees Manages, creates, and perform parts entry into IFS ERP system Configures and modifies CCITest sequences Provides field support at the customer site for test system installation as well as repairs Knowledge, Skills, and Abilities: An Associate's degree in electronics or related field is required with a minimum of 6 years of work experience in electronics performing similar functions. A thorough knowledge of electrical/electronic components and equipment, including the use of special instruments for diagnostic purposes Solid analytical skills; able to resolve complex technical problems Ability to read and interpret technical drawings (blueprints and schematics) and specifications Requires a strong initiative, proactive nature and a sense of urgency Must be able to work in a changing, fast-paced environment and handle multiple priorities simultaneously Working knowledge of confidentiality and security of intellectual property (ITAR, Prototype) What to Expect at Work Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to support individuals with disabilities. This position requires simple and firm grasping and fine manipulating of the hands to assemble, operate tooling and testing equipment Regular exposure to manufacturing areas which may entail exposure to dirt, dust, noise, machine chemicals, fumes, and other attributes common to this environment Ability to lift and carry up to 20 lbs. Working Environment The work environment characteristics described here are representative of those you may encounter while performing the essential functions of this job. Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, stoop and twist as required Regular exposure to moving mechanical parts and vibration; risk of electrical shock. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. The wage range is $26 to $35 per hour. The hiring manager will determine the final starting wage (within the range above) based on the successful applicant's qualifications. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). Compensation includes hourly base rate and performance-based quarterly profit sharing. Benefit offerings include medical, dental, vision, employer paid term life insurance, short-term and long-term disability, and retirement program with employer match. Paid leave includes paid time off and holiday pay. Circuit Check, Inc is an Equal Opportunity and Affirmative Action employer. No employee nor applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. PI4bdff701dc8b-9830

Description: Thermo-Trol Systems Inc. (TTS) is a provider of industrial automation and control solutions. We specialize in designing, installing, and maintaining systems that optimize processes, increase efficiency, and ensure reliable operations for a range of commercial clients and government facilities. A motivated and skilled DDC Controls Field Engineer is sought to join the team. Job Summary: The successful candidate will be responsible for the installation, commissioning, troubleshooting, and maintenance of systems that utilize advanced Direct Digital Control (DDC) technology. This role requires a strong understanding of building automation software (including WebCTRL), software management, configuration trends, and a technical aptitude, as well as the ability to work independently and collaboratively in a fast-paced field environment. Responsibilities: Initiate, install, troubleshoot, test, and optimize customer systems that utilize advanced DDC technology. Troubleshoot electrical, mechanical, and software-related issues in automated systems. Load software, configure trends, alarms, and reports. Interpret schematic drawings, sketches, and reports to reflect changes or alterations made in instruments, circuits, and systems. Read technical drawings, manuals, and diagrams for installation. Collaborate with engineers, programmers, and other technicians to ensure seamless system integration. Document all service activities, troubleshooting procedures, and system configurations accurately and on time. Provide clear and effective communication with clients regarding service status and resolutions. Ensure strict adherence to safety procedures, including Lockout/Tagout. Support in-house development of projects. Travel to project sites as needed. Requirements: Qualifications: High School Diploma or equivalent. Technical or Business School Certificate or Diploma in Controls, HVAC, or related field preferred. 2-5 years of experience in Building Automation, HVAC, or technical field. Proficient with advanced building automation software, such as WebCTRL, and installing building automation controls. Able to read and interpret technical documentation, including blueprints, wiring schematics, and diagrams. Able to integrate various building automation systems. Expert with TCP/IP networks that include wireless equipment. Proficiency in DDC programming and troubleshooting (e.g., ALC, JCI, Trane). Familiarity with VFDs. Able to manage multiple simultaneous challenges. Excellent problem-solving and analytical skills. Able to communicate technical information to a non-technical end-user. Strong communication and interpersonal skills to collaborate effectively with clients and team members. Able to work independently and manage time effectively. Willingness to travel to client sites as required. Required: Able to pass a background check. Able to pass a drug screen for federal contractor requirements. Valid driver's license with clean driving record. Able to clear security checks needed to conduct work on federal bases and other government property. Able to meet the physical requirements of the position, to include but not limited to lifting to at least 50 lbs., bending, squatting, climbing ladders, using various lift-equipment over 8 feet above grade, standing for extended periods of time, and working in various environments that may include noisier conditions at times. Compensation & Benefits: Competitive wage based on experience. Comprehensive health, dental, vision, and life insurance. Tax-advantaged Accounts (Health Savings Account, Dependent Care Spending Account). Paid vacation and sick leave. 401(k) plan with company match. Profit Sharing. Tuition Assistance. Company issued vehicle or mileage reimbursement. Opportunities for career advancement and ongoing training. Collaborative and innovative work environment. About Thermo-Trol Systems: Thermo-Trol Systems is a construction contractor specializing in HVAC and Industrial Control Systems, Integration Solutions, UL 508A Custom Control Panel Manufacturer, Controls & HVAC Mechanical Service Company, primarily serving Southeastern Virginia and Northeastern North Carolina. Thermo-Trol Systems has been in business since 1967. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. PIfd12bc1feacc-1212

Description: ABOUT US: Interprint, Inc. is a designer and printer of decor paper used as the design layer in laminate surfaces such as countertops, flooring, furniture, store fixtures and a host of other applications. We have a competitive benefits package. Must be 18 to apply. JOB TITLE: Engraving Plating Technician PAY RANGE: $19.00 - $20.00 HOURS: Day shift - 7:00am - 5:00pm Monday- Friday. Opportunity to leave early on Friday depending on business need to be discussed in interview. LOCATION: Interprint, Inc. 101 Central Berkshire Blvd. Pittsfield, MA We are close to Lee, MA; Westfield, MA; Troy, NY and Albany, NY BENEFIT HIGHTLIGHTS: Medical, Dental, Life and Disability Insurance, Paid Time Off, Paid Holidays, 401(k) with company match. EMPLOYMENT: We are looking for a Engraving Plating Technician to fill an opening immediately in Pittsfield, MA. The qualified Engraving Plating Technician will have the following skills and abilities: JOB RESPONSIBILITIES: To encompass the following but not limited to: ENGRAVES CYLINDERS - By Engraving the line resolution and cell configuration specified using visual and microscopic evaluations of the cylinder surface and engraving; finishing the cylinders and chroming the cylinders after engraving; polishing and inspecting the cylinder surface. Transferring engraving logs to quality cert folder. Data entry of cell volume measurements for record keeping. Documentation of daily engraving logs and data entry to excel file for engraving records. ASSIST WITH CYLINDER LOGISITCS - Programming automation, entering cylinders into and out of the line. Transporting and retrieving cylinders to and from the cylinder department to the engraving room. Installing and removing adaptors for lab and odd size bases. RIPS FILES - Copying and ripping the files from the Repro Department to the DLS system and verifying that all data is correct for the engraving specifications. ENGRAVING LOGISTICS - Conducting SAP transactions to close engraving orders, base stock movement for cylinder allocation. Coordinates cylinders needed for re-chromes, plating, de-plating and engraving. ASSIST PRODUCTION - Coordinating meetings with production supervisor to review re-chromes and/or special request made to cylinders. ENSURES OPERATION OF EQUIPMENT - Daily inspecting of the laser, finishstar, extraction system and chillers, zinc dissolving tank; carrying out all services required by the OEM including changing filters, laser lamps, cleaning the extraction chamber etc. this includes: coordinating with the Maintenance Department and outside vendors to adhere to all preventative maintenance programs MAINTAINS CYLINDER ENGRAVING ROOM - keeping area neat, clean and organized; cleaning and maintaining all plating equipment. KEY SKILLS & QUALIFICATIONS: Reliable and punctual; consistently arrives on time and ready to work Ability to manage multiple tasks in a fast-paced environment Works effectively both independently and as part of a team Basic knowledge of Safety Data Sheets (SDS) preferred Follows instructions carefully with strong attention to detail Communicates clearly and professionally with team members Basic data entry/computer skills Comfortable working with chemicals in a manufacturing environment Strong mechanical aptitude is a plus PM22 Requirements: PIe6b40b89ad98-5742

ALPLA is a global family-owned, privately held company that makes innovative, customized, recycled packaging for top companies such as P&G, Unilever, L'Oréal, Pepsi, and more. ALPLA values their employees, work-life balance, personal growth, compensation and sustainability. Schedule: Dayshift (M-F) with after-hours and weekend on-call support required What Can You Expect From ALPLA Health and Wellness Care Program- Benefits Child Care Benefits Dependent Care Cost Savings Program Recognition programs; Promotional opportunities 401K Retirement Plan and excellent Matching Plan Medical, dental, vision plan Education assistance program/tuition reimbursement Short term, long term and life insurance paid by ALPLA Paid vacation; paid holidays Main Responsibilities Preparation of change over Ensures material availability and performs weekly inventory of all raw materials Coordinates and performs mold change activities with production Confirms (with Planner) current order is complete prior to beginning change over Ensures line clearance procedures have been completed prior to initiating changeover Performs mold changes Changes molds and format parts in blow molding equipment Ensures mold changes are complete in defined timeframes Performs start-up and process in molds that have been used for established products to meet QA approval Ensures supplementary systems are set-up and functioning (e.g. orientation units, trimming or coating systems, vision systems, etc) with support of downstream engineer or maintenance team as appropriate. Machine maintenance during mold changes Identifies mechanical issues during changeovers Effects minor repairs and adjustments (e.g. replace blow nozzles, gripper fingers, machine component adjustments, etc.) Informs machine and process technician team lead of any mechanical issues outside of the scope of changeover team Execution Processes bottles to QA approval Supports all necessary reports The position description is not all inclusive and other duties may be assigned. What Makes You Great Performance Measurements: Time to complete mold changes Reports (accurate and complete) Quality of processed bottles Machine efficiency Relating to infeed, machine, mold, tooling and downstream set-ups Education/Experience: Associates degree in technical field Technical background Good knowledge of Blow Molding process Qualifications/Skills: Basic computer skills Must be able to lift up to 50 pounds Able to operate Forklifts Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job: The employee is regularly required to stand, walk, reach with hands and arms and very occasionally to climb or balance. The employee is regularly required to climb or balance when using correct stands on machine ladders. The employee is frequently required to use hands to finger, handle, or feel; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and/ or move up to 10 lbs, frequently lift and/or move up to 30 lbs and occasionally lift and/or move more than 50 lbs. It is required to act in a safe and environmentally responsible manner at all times by adhering to all ALPLA policies and procedures and Safety Standards (OSHA). ALPLA is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: ALPLA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at ALPLA are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. ALPLA will not tolerate discrimination or harassment based on any of these characteristics. Education Required Associates or better in Mechanical Systems or related field Technical/other training or better in Engineering Computer Systems or related field Behaviors Preferred Functional Expert: Considered a thought leader on a subject Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Motivations Preferred Self-Starter: Inspired to perform without outside help Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

ALPLA is a global family-owned, privately held company that makes innovative, customized, recycled packaging for top companies such as P&G, Unilever, L'Oréal, Pepsi, and more. ALPLA values their employees, work-life balance, personal growth, compensation and sustainability. What Can You Expect From ALPLA Health and Wellness Care Program- Benefits Child Care Benefits Dependent Care Cost Savings Program Recognition programs; Promotional opportunities 401K Retirement Plan and excellent Matching Plan Medical, dental, vision plan Education assistance program/tuition reimbursement Short term, long term and life insurance paid by ALPLA Paid vacation; paid holidays What You Will Enjoy Doing Main Responsibilities: Responsible for measuring and reporting dimensional characteristics according to PDS inspection plan or customer specification Writes CMM programs, validates CMM measurements (reviews data for accuracy); identifies root cause of abnormalities Sets up inspection plans for assigned articles with correct test settings and documentation Documents product information on basic data, QA reports, and Inspection plan Responsible for setup of functional and visual tests according to PDS inspection plan or customer specification Sets up and measures wall thickness as required and performs the wall thickness testing Performs destructive testing including drop test, Bruceston testing & leak testing Writes compression strength, capping & de-capping programs Performs nonstandard tests as needed Understands and able to analyze product system interaction to detect issues Responsible for working with Packaging Manager and Process Development team on QA related qualification procedures Provides QA support for testing and data analysis as needed for new product implementation in the TC and ALPLA production sites and AQPs. Supports the team needs to produce successful and timely pilot samplings Writes procedures and One Point Lessons for test equipment as needed Reviews and sends QA packages to the ALPLA facilities as required Responsible for understanding, maintaining, and using lab equipment Logs internal calibration checks on quality related equipment in the QA lab and technical center production floor Performs Gage RR, Measurement Systems Analysis Records and captures layer thickness when needed using Microscope Measures with other devices, such as depth gauge, height gage, or optical comparator What Makes You Great Education: Minimum 2-year Degree (Associates) in related field or equivalent, required 4-year Degree (Bachelor), preferred Experience: 2-5 years of experience in quality field, required Skills: Good communication skills Ability to work well in team environment Experience with physical lab testing equipment, including calipers, scales, digital height gauge and compression force testing equipment Able to handle multi-task environment with good organization skills Excellent computer skills May be required to work overtime Understanding of statistics and SPC Software Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job: The employee is regularly required to stand, walk, reach with hands and arms and very occasionally to climb or balance. The employee is frequently required to use hands to finger, handle, or feel, stoop, kneel, crouch, or crawl and talk or hear. The employee is regularly required to sit. The employee must regularly lift and/ or move up to 10 lbs, frequently lift and/or move up to 30 lbs and occasionally lift and/or move more than 50 lbs. Specific vision abilities required by this job include close vision. It is required to act in a safe and environmentally responsible manner at all times by adhering to all ALPLA policies and procedures and Safety Standards (OSHA). ALPLA is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: ALPLA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at ALPLA are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. ALPLA will not tolerate discrimination or harassment based on any of these characteristics. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Carter Machinery Location: Elkridge, MD 21075, USA Category: Service Posted Date: January 7, 2026 Requisition_Number: ELECT006041 Schedule: Full Time EOE Statement Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor. We are currently offering up to a $10,000 sign-on bonus for experienced EPG Field Technician new hires. Carter Machinery Company, the authorized Caterpillar dealer serving Virginia, West Virginia, Maryland, Delaware and Washington D.C. is hiring an Electric Power Generation (EPG) Field Technician in Elkridge, Maryland. The Electric Power Generation (EPG) Field Technician position is responsible for accurately diagnosing, troubleshooting and repairing complex operational failures to electrical generator systems and related basic engine failures at customer sites. Seeking candidates with a minimum three years' experience diagnosing, troubleshooting, and repairing complex issues and performing heavy electrical repairs to electrical generator systems and related equipment; Must have experience performing megger and vibration testing and genset alignment; Must have experience installing and commissioning gensets; High school diploma or GED required. Minimum of three years relevant Electrical Power Generation (EPG)/electronics field experience required to be eligible for the $10,000 sign-on bonus. Candidates with less than 3 years' Electrical Power Generation (EPG)/electronics field experience are eligible for a $2,000 sign-on bonus. Bonuses are made in 2 equal installments at 90 days and 180 days of employment. Requirements for the Electric Power Generation (EPG) Field Technician position include: Must have excellent troubleshooting and analytical skills. Must have excellent mechanical aptitude. Must be able to work independently and as part of a team. Must be able to interact professionally with customers and all of levels of personnel within the organization. Must be a strong communicator with excellent verbal and written communications skills. Must be able to perform well under stressful situations. Must be able to demonstrate the ability to learn and apply new knowledge. Must be a self-directed and well organized with the ability to prioritize workload while providing excellent customer service. Must have an excellent driving record and the ability to obtain a CDL and/or DOT certification. Must be able to work additional hours as required and travel out of town, including out of the country to meet customers' demands. Must be proficient in the use of technical software, databases and manuals. Promote a positive customer experience. Uphold the Core Values of Integrity, Commitment, Excellence and Teamwork by embracing The Carter Way. Physical requirements must be met for the Electric Power Generation (EPG) Field Technician job, including the ability to lift, carry and maneuver items up to 70 pounds, including bulky objects. This position requires repeated reaching, standing, stooping, kneeling, bending and climbing. Must be able to work outside in inclement weather conditions, including extreme heat, cold, dampness and humidity. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. This job description is not intended to be all-inclusive. Additional duties may be assigned. Starting Compensation Range: $33.95- $47.19 per hour Actual base salary may vary based upon, but not limited to, relevant experience, skills, candidate qualifications, education, geographic location, and other relevant business factors. In addition to base salary, the competitive compensation package may include, depending on the role, participation in an incentive program linked to performance e.g. discretionary incentive programs or non-discretionary incentive plans. Additional Competitive Benefits Package that includes: Health, dental and vision insurance. Paid time off. 401(k), $0.75 to $1.25 match up to 6%. Life and disability insurance. In-house training instructors/programs. Tuition reimbursement. Employee referral bonus program. Discounts: cellular phone service, computers, tooling, cars and trucks. Opportunities for overtime. Shift differential (if applicable). Carter Machinery Co. Inc. is an EEO/AA Employer. All qualified individuals - including minorities, females, veterans, and individuals with disabilities, or any other characteristic protected by law - are encouraged to apply. Carter Machinery is a drug-free workplace. Special rules and restrictions may apply to sign-on bonus eligibility for rehires. PM21 PIab67d8f54c79-6841

At Duke Health, we're driven by a commitment to compassionate care that changes the lives of patients, their loved ones, and the greater community. No matter where your talents lie, join us and discover how we can advance health together. About Duke Raleigh Hospital, A Campus of Duke University Hospital Pursue your passion for caring with the Duke Raleigh Campus in Raleigh, North Carolina. With 204-beds, it is the third largest of Duke Healthcare's four hospitals and offers a comprehensive array of services, including cancer, cardiovascular, neuroscience, advanced gastrointestinal, and wound healing care. General Description of the Job Class Develops Sterile Processing educational programs regarding proper decontamination, disinfection, and sterilization methods. Collaborates with Sterile Processing Departments (SPD) to ensure Sterile Processing staff, are properly trained and operating within the guidelines set forth by various industry standards and regulations including, but not limited to HSPA, CBSPD, AORN, The Joint Commission, FDA, CDC, OSHA, and AAMI. Duties and Responsibilities of this Level Responsible for staff training and continuous assessments of skills and knowledge to include decontamination, instrument tray assembly, instrument tray storage, sterilization processes and standard precautions to ensure patient safety. Performs new hire staff orientation. Facilitates individual, team and department performance management that include competency development and evaluation, change management processes, work and accountability processes, performance consultation and mentoring staff, and development of job/performance aids. Provides programs that support staff's ability to learn, adapt and change swiftly as new technology emerges and clinical practice evolves. Performs random proactive quality checks of instrument sets and case carts. Collects data for tray errors, missing instrument, documents and reports findings to SPD leadership. Develops training for staff to address identified gaps. Performs retroactive quality checks collects, tracks, researches, resolves and provides follow-up with SPD leadership on collected data related to instrumentation and supplies. Routinely works various shifts to perform quality checks and provide training to the off shifts. Develops program to monitor and review biological control culturing procedures for sterilizers to ensure equipment is operating according to standard. Develops and maintains a tracking system for materials and equipment prepared and issued by SPD in the event of a recall. Maintains a liaison with the operating room managers and staff on tray rightsizing and proper techniques for processing trays in the operating room in preparation for decontamination. Maintains documentation relating to safety, effectiveness, and cost in planning, delivering, and managing training and development activities. Provides technical assistance to SPD staff for the assembly of complex surgical instrument sets and provides technical assistance to surgical techs and other Perioperative clinical staff for instrument related issues. Responsible for the knowledge-transfer and ongoing education of staff as they prepare for certifications such as CBSPD (Certification Board of Sterile Processing & Distribution) or HSPA (Healthcare Sterile Processing Association). Ensures resources are available to assist staff in maintaining required CEUs needed for their certifications and makes sure staff keeps certifications up to date so that they do not lapse. Responsible for documentation and record maintenance for all team member competencies in the Sterile Processing Department including managers and supervisors Conducts audits of staff training records to ensure compliance with governing guidelines Works with SPD leadership team in the planning and implementation of clinical service unit and departmental goals, development of policy and procedures, and annual competencies. Assists leadership in the collection of other data for performance improvement initiatives as necessary. Demonstrates compliance with patient safety and risk management protocols including standard precautions and infection control policies. Creates a climate of innovation through role modeling, consultation, research and facilitation of learning. Perform other related duties incidental to the work described herein. Required Qualifications at this Level Education High school diploma or equivalent is required. Bachelors in a healthcare related field preferred. Experience Four years in Central Sterile Services; supervisory or educator role experience preferred. Degrees, Licensure, and/or Certification Current certification as a Sterile Processing Technician through an accredited organization (CRCST - Certified Registered Central Service Tech, HSPA, or Certified Sterile Processing and Distribution Technician CBSPD). Certification in Healthcare Leadership (CHL) preferred. Duke is an Equal Opportunity Employer committed to providing employment opportunity without regard to an individual's age, color, disability, gender, gender expression, gender identity, genetic information, national origin, race, religion, sex (including pregnancy and pregnancy related conditions), sexual orientation or military status. Duke aspires to create a community built on collaboration, innovation, creativity, and belonging. Our collective success depends on the robust exchange of ideas-an exchange that is best when the rich diversity of our perspectives, backgrounds, and experiences flourishes. To achieve this exchange, it is essential that all members of the community feel secure and welcome, that the contributions of all individuals are respected, and that all voices are heard. All members of our community have a responsibility to uphold these values. Essential Physical Job Functions: Certain jobs at Duke University and Duke University Health System may include essential job functions that require specific physical and/or mental abilities. Additional information and provision for requests for reasonable accommodation will be provided by each hiring department.

Commercial Multi Lines Insurance Underwriter - Minneapolis, MN Insurance Underwriter Specialty Program Excess Surplus Commercial Lines Program Underwriter _ . REMOTE WORK FROM HOME POSSIBLE Shall: • Accept, modify, or reject risk based on review. • Review new and renewal business submissions and provide rate quotes for applications. • Produce new businesses through sales and marketing. 5+ years multi-line underwriting experience, expertise in General Liability, Commercial Property/Package, Commercial Auto, W/C and Umbrella with 4 year degree. A global premier insurance carrier offering full company paid benefits including health dental and vision with growth potential, bonuses, dollar-for-dollar company matched 401(k), paid vacations, holidays and sick time. For complete details contact Greg Foss at: ext 270 Or submit resume online at: Or email to: Please reference when responding. Education Requirements: Bachelor Degree Minimum Experience Requirements: 2-5 years Job City Location: Lewisville Job State Location: MN Job Country Location: USA Salary Range: $100,000 to $200,000 Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain CNC Machine Tool Routers Grinders Saws Cutters Lathes Mills Millers Machining Centers Robot Loaders DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call .

ALPLA is a global family-owned, privately held company that makes innovative, customized, recycled packaging for top companies such as P&G, Unilever, L'Oréal, Pepsi, and more. ALPLA values their employees, work-life balance, personal growth, compensation and sustainability. To assist the Quality Assurance Manager in all Quality Assurance activities in Production and in Laboratory to assure exceptional quality product is delivered to the customer. What Can You Expect From ALPLA Health and Wellness Care Program- Benefits Child Care Benefits Dependent Care Cost Savings Program Recognition programs; Promotional opportunities 401K Retirement Plan and excellent Matching Plan Medical, dental, vision plan Education assistance program/tuition reimbursement Short term, long term and life insurance paid by ALPLA Paid vacation; paid holidays WHAT YOU WILL ENJOY DOING Measurements and Testing Measures, records and reports dimensional, functional and visual attributes per internally specified requirements Maintains measurement database integrity Documentation Controls and reports all nonconformance product per documented procedures Documents and reports all supplier quality related issues per document procedures Quality System Support Assists in audit preparation Conducts internal audits as required Trains and monitors all personnel performing quality testing within the quality lab and on the production floor Provides a signed acceptable color sample for production line at each start up Sampling-Assistance Color matching Labeling Pull samples as needed The position description is not all inclusive and you may be required to perform other duties as assigned. What Makes You Great Performance Measurements: Customer and external audits Customer complaints Quality of products Education/Experience: High School Diploma or equivalent Experience with physical lab testing equipment, calipers, scales, digital height gauge and compression force testing equipment preferred Qualifications/Skills: Basic computer skills Ability to work well with other departments Able to make decisions with little supervision (Night Shift) Able to handle multi-task environment with good organizational skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job: The employee is regularly required to stand, walk, reach with hands and arms and very occasionally to climb or balance. The employee is frequently required to use hands to finger, handle, or feel; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and/ or move up to 10 lbs, frequently lift and/or move up to 30 lbs and occasionally lift and/or move more than 50 lbs. Specific vision abilities required by this job include close vision. It is required to act in a safe and environmentally responsible manner at all times by adhering to all ALPLA policies and procedures and Safety Standards (OSHA). ALPLA is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: ALPLA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at ALPLA are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. ALPLA will not tolerate discrimination or harassment based on any of these characteristics. Tech Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Position Title: HVAC Multi-Family Commercial - Installer, Lead and Foreman Location: San Diego, CA Salary Interval: Hourly Non-Exempt Pay Range: $21.00 - $40.00 Date Posted: 04/13/2026 Application Instructions Before you apply A few things to know before you apply for an hourly position: You must be able to provide proof of legal authorization to work in the United States. A valid email address is required to submit an application through our online system, which will enable you to receive important updates related to your application. Position Description ! NP Mechanical Inc. (A proud 100% employee-owned ESOP- Wealth Building Retirement Program) is looking to hire an organized, professional MultiFamily Commercial HVAC Foreman, Lead, Installer to join our team. Fulltime position, Monday through Friday Hours: 7:00 AM - 3:30 PM Foreman Duties and Responsibilities: Supervise and coordinate the activities of HVAC technicians and subcontractors on multi-family commercial projects. Plan and schedule project timelines, ensuring adherence to project plans and specifications. Oversee the installation, maintenance, and repair of HVAC systems in multi-family buildings. Ensure compliance with safety regulations and building codes. Conduct regular inspections to assess work progress and quality. Troubleshoot and resolve issues related to HVAC systems and installations. Collaborate with project managers, engineers, and architects to ensure project objectives are met. Order and manage inventory of necessary materials and equipment. Train and mentor junior HVAC team members to enhance skill levels and maintain high-quality standards. Communicate effectively with clients to provide updates and address concerns. Prepare and submit reports on project status, labor, and material usage. Ensure that all work is completed on time and within budget. Foreman Responsibility for Others: Supervise Pay range: $32 - $40 In this pivotal role, as a Lead you will lead a skilled team, ensure top-notch service delivery and customer satisfaction while contribute to the growth and success of our projects. If you are a proactive leader with a passion for excellence in HVAC solutions, we invite you to bring your expertise to our innovative organization. Lead Duties and Responsibilities: Lead and oversee the installation, maintenance, and repair of HVAC systems in multi-family commercial properties. Coordinate with project managers and other construction professionals to ensure timely and efficient project completion. Develop and implement HVAC operational strategies that align with the project's goals and requirements. Supervise a team of HVAC technicians, providing guidance, training, and performance evaluations. Conduct regular inspections and quality control checks to ensure all HVAC installations meet industry standards and regulations. Troubleshoot complex HVAC issues and provide expert solutions to ensure optimal system functionality. Manage HVAC project budgets, ensuring cost-effective practices and procurement of materials. Collaborate with architects, engineers, and contractors to design HVAC systems that meet building specifications and codes. Ensure compliance with all safety regulations and company policies during HVAC operations. Maintain detailed records of HVAC installations, repairs, and maintenance activities. Provide technical expertise and support to clients, addressing any concerns or questions they may have. Stay updated with the latest HVAC technologies, trends, and industry best practices. Prepare and present reports on project progress, system performance, and team productivity to senior management. Lead Responsibility for Others: Lead Pay range: $32 - $40 In this pivotal role, as an installer you'll work with cutting-edge HVAC systems, collaborating with a dedicated team to deliver exceptional service and craftsmanship. If you are passionate about providing top-notch installations and thrive in a dynamic environment, we invite you to contribute your skills to our growing company. Installer Duties and Responsibilities: Install HVAC systems in multi-family and commercial buildings according to blueprints and specifications. Collaborate with project managers and construction teams to ensure installations meet project timelines and standards. Conduct assessments of existing HVAC systems and recommend upgrades or replacements as necessary. Ensure all installations comply with local, state, and federal regulations and codes. Test installed systems for proper functioning and make necessary adjustments or repairs. Provide training and guidance to junior installers and apprentices. Maintain accurate records of installations and service work performed. Adhere to safety protocols and procedures to maintain a safe work environment. Communicate effectively with clients to explain installation processes and address any concerns. Coordinate with suppliers and vendors to obtain necessary materials and equipment. Perform routine maintenance on HVAC systems to ensure longevity and optimal performance. Troubleshoot and diagnose issues with HVAC systems and implement effective solutions. Installer Responsibility for Others: No Direct Responsibility for Others Pay range: $21 - $24 Work Environment: Field Benefits Eligible for Medical, Dental, Vision & Voluntary plans (after eligibility criteria is met. ) Paid Basic Life and AD&D at no cost 401k Retirement Plan ESOP Retirement Plan Sick Pay Holiday Pay Position Requirements Foreman Requirements: Minimum of 5 years of experience in HVAC installation and maintenance in multi-family or commercial projects Proven experience in a supervisory or foreman role within the HVAC industry Strong knowledge of HVAC systems, components, and installation techniques Ability to read and interpret blueprints, schematics, and technical drawings Excellent leadership and team management skills Strong problem-solving and decision-making abilities Effective communication skills, both verbal and written Ability to work in a fast-paced environment and handle multiple tasks simultaneously Proficient in using HVAC tools and diagnostic equipment Understanding of safety regulations and procedures in the HVAC industry Valid driver's license and reliable transportation Certification from a recognized HVAC training program is preferred Ability to lift heavy equipment and work in various environmental conditions Availability to work flexible hours, including evenings and weekends, as needed Lead Requirements: Minimum of 5 years of experience in HVAC installation, maintenance, and repair in multi-family or commercial properties. Proven experience in leading and managing HVAC projects from inception to completion. Strong knowledge of HVAC systems, components, and installation practices specific to multi-family and commercial properties. Proficient in reading and interpreting blueprints, technical drawings, and specifications. Ability to perform load calculations and equipment sizing for multi-family and commercial buildings. Strong understanding of local and national building codes and regulations related to HVAC systems. Excellent problem-solving skills and attention to detail. Ability to lead and mentor a team of HVAC technicians effectively. Strong communication and interpersonal skills. Valid HVAC license and relevant certifications (e.g., EPA 608 certification). Proficiency in using HVAC diagnostic tools and software. Ability to work in a fast-paced environment and manage multiple projects simultaneously. Valid driver's license and reliable transportation. Willingness to work flexible hours, including evenings and weekends if necessary. Installer Requirements: High school diploma or GED equivalent. Valid HVAC certification and/or relevant trade license required. Minimum of 3-5 years of experience in commercial HVAC installation, specifically in multi-family buildings. Proficient in reading and interpreting blueprints, schematics, and technical drawings. Strong knowledge of HVAC systems, components, and installation procedures. Ability to troubleshoot and resolve installation issues efficiently. Familiarity with local and national HVAC codes and safety regulations. Experience with various HVAC systems, including split systems, packaged units, and ductless systems. Strong mechanical aptitude and problem-solving skills. Ability to lift and carry heavy equipment and materials (up to 50 pounds). Excellent communication and teamwork skills. Valid driver's license and reliable transportation. Ability to work flexible hours, including weekends and overtime as needed. . click apply for full job details

Maintenance Technician Industrial Maintenance Technician Crown Health Care Laundry Services, a well-established and growing linen services company with plants in Alabama, Florida, Georgia, Louisiana, Mississippi, and South Carolina, has an immediate opening for a Maintenance Technician. Crown Health Care Laundry provides great career opportunities and the chance to utilize your technical skills in an ever-changing environment. Our engineers and maintenance technicians are a critical part of our team to help us accomplish our goal of providing exceptional service to our customers. Successful candidate will have a strong troubleshooting ability in the electrical control field to include PLCs, inverter drives, pneumatics, hydraulics, pumps, bearing, chains and belting, conveying systems, valves, basic blueprint reading, and mechanical troubleshooting. Duties Include Performing preventive maintenance on assigned equipment Record taking of daily meter readings, boiler chemistry, and sanitation Responding to maintenance calls during production hours Repairing machinery in a fast-paced environment with a sense of urgency Assist in training new employees on correct machinery operation Qualifications Two years electrical experience Strong communication skills Flexible schedule which includes weekends, and holidays Have keen acumen relating to safety and quality Must be able to access and navigate all areas of the facilities. Must be able to access all parts of the company equipment. This position requires a proven history of being a positive, self-driven team player who can work at a fast pace in a team-based environment. Salary based upon experience within the engineering field. Mid shift Overnight

B. Braun Medical, Inc.Company: B. Braun US Pharmaceutical Manufacturing LLCJob Posting Location: Irvine, California, United StatesFunctional Area: ProductionWorking Model: OnsiteDays of Work: Wednesday, Tuesday, Monday, SundayShift: 3/4 X 12Relocation Available: NoRequisition ID: 9894B. Braun Medical Inc., a leader in infusion therapy and pain management, develops, manufactures, and markets innovative medical products and services to the healthcare industry. Other key product areas include nutrition, pharmacy admixture and compounding, ostomy and wound care, and dialysis. The company is committed to eliminating preventable treatment errors and enhancing patient, clinician and environmental safety. B. Braun Medical is headquartered in Bethlehem, Pa., and is part of the B. Braun Group of Companies in the U.S., which includes B. Braun Interventional Systems, Aesculap and CAPS . Globally, the B. Braun Group of Companies employs more than 64,000 employees in 64 countries. Guided by its Sharing Expertise philosophy, B. Braun continuously exchanges knowledge with customers, partners and clinicians to address the critical issues of improving care and lowering costs. To learn more about B. Braun Medical, visit Summary:Responsibilities: Essential DutiesOperate all assigned equipment, follows and oversees the standard work according to department SOP's.Work with the manufacturing leaders to establish, implement, maintain, and enhance standard work in the area.Conduct training for operators on standard work and trouble-shooting techniques and evaluate the effectiveness of training.Recommend changes to operating procedures to improve quality and efficiency.Contribute and participate in continuous improvement programs including LPMS, 5S, KATA, and Kaizen events.Troubleshoot machine/line stoppage, perform repairs, and facilitate the escalation process for additional technical support as required. Perform preventive and corrective maintenance activities during machine downtime and/or, partner with operations, mechanics and engineers as appropriate to execute maintenance activities.Monitor production quality and take action according to the standard work / SOP. Complete appropriate documentation including batch records, log books, PM and DM as required, following good documentation practices Higher level Operating technicians will perform all functions listed above on multiple pieces of equipment as determined by department management Setup and AlignmentsEquipment Alignment: Align peripheral equipment or arrange for assistance and complete necessary documentation.Set-Up and Start-Up: Perform set-up and start-up for code changes according to equipment manuals and product specifications and procedures. Operation and MonitoringOperate and maintain Machinery: Start and stop the machine as needed, including cleaning and restarting after electrical failure or other interruptions.Material Handling: Feed materials to the machine, inspect, pack, and document according to plant procedures. Monitor Machine Performance: Ensure the machine operates within its validated perimeters, adhering to process validation, procedures, specifications, andsafety and environmental regulations.Operational Standards:Comply with operational standards for efficiency, production, scrap, downtime, and cycletime. Waste management: Remove, verify, and identify waste (scrap) from stations as required. Product Packaging: Packproducts in double plastic bags with proper identification and seal them hermetically.Produition Monitoring/Shift Information: Prepare information boards for responsible machines. Maintain written records or production graphs to monitor productivity and establish trends. Work Area Sanitation: Sanitize worktables, conveyors, and inspection tables. Product Quality ControlQuality Control: Identify, report, and address deviations in process parameters or incidents affecting product quality.Testing: Perform dimmensional, functional, and special tests according to specifications and SOPS.Product Inspection: Visually and instrumentally inspect products in process to detect defects according to specifications. Documentation ReportingRecord Keeping: Maintain records of critical machine parameters and complete required documentation.Manually or electionically document required information, including parameters, batches, and production data. Mainteneance and TroubleshootingRoutine Maintenance: Conduct routine, preventative, and corrective maintenance, including cleaning, greasing, and lubricating machinery.Troubleshoot Issues: Diagnose and repair malfunctions in machinery.Tool Management: Maintain and secure provided tools. Safety and ComplianceFollow Safety Protocols: Adhere to safety regulations and protocols. Ensure Compliance: Ensure all machinery and systems comply with industry standards. Collaboration and TrainingCommunication: Notify and keep Automation, Manufacturing, Quality, Engineering personnel informed of any issues affecting machine operation or process.Process Improvement: Collaborate with Automation, Process Engineering, and Quality Department personnel to analyze and improve manufacturing processes. Train Staff: Train other staff members on the operation and maintenance of assigned equipment. The job function listed is not exhaustive and shall also include any responsibilities as assigned by the Supervisor from time to time. General: It shall be the duty of every employee while at work to take reasonable care for safety and health of himself/herself and other persons. Expertise: Knowledge & SkillsRequired to apply comprehensive working knowledge of technical field/area of specialization. Exercises general application of principles, theories and concepts, and proposes a course of action. Performs comprehensive shop floor competencies.Works under general supervision. May periodically assist in orienting, training, assigning & checking the work of other peers.May require some limited judgement in resolving problems.Contacts are primarily with department supervisors, leads, subordinates, and peers. Occasional contact with external contractors/vendors. Expertise: Qualifications -Education/Experience/Training/Etc Required:High school diploma/G.E.D required, Associate's or technical degree preferred.05-08 years related experience OR Technical requirements completed and pass assessment at appropriate level.Applicable industry/professional certification preferred.Regular and predictable on-site attendance While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to use hands to handle or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 20 pounds. Responsibilities: Other Duties:The preceding functions have been provided as examples of the types of work performed by employees assigned to this position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed in this description are representative of the knowledge, skill, and/or ability required. Management reserves the right to add, modify, change or rescind the work assignments of different positions due to reasonable accommodation or other reasons. Physical Demands:While performing the duties of this job, the employee is expected to:Moderate work - Exerting up to 40 lbs of force occasionally, and/or up to 20 lbs of force frequently, and/or 10 lbs force constantly to move objects.Lifting, Carrying, Pushing, Pulling and Reaching:Occasionally:Reaching upward and downward, Push/pull, StandFrequently:SitConstantly:N/AActivities:Occasionally:Climbing stairs/ladders, Kneeling/Crawling, Sitting , Stooping/squattingFrequently:Finger feeling, Hearing - ordinary, fine distinction, loud (hearing protection required), Push/pull, Reaching upward and downward, Seeing - depth perception, color vision, field of vision/peripheral, Standing, Talking - ordinary, loud/quick, WalkingConstantly:N/AEnvironmental Conditions:Occasionally:Exposure to toxic or caustic chemicals (in most areas)Frequently:N/AConstantly:Proximity to moving parts Work Environment:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Noise Intensity:ModerateOccasionally:N/AFrequently:N/AConstantly:Production/manufacturing environment $33.99/hr The targeted range for this role takes into account a range of factors that are considered when making compensation and hiring decisions; included but not limited to: skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. Compensation decisions are dependent on the facts and circumstances of each case. The range provided is a reasonable estimate. B. Braun offers an excellent benefits package, which includes healthcare, a 401(k) plan, and tuition reimbursement. To learn more about B. Braun and our safety healthcare products or view a listing of our employment opportunities, please visit us on the internet at . Through its "Sharing Expertise " initiative, B. Braun promotes best practices for continuous improvement of healthcare products and services. We are an equal opportunity employer. We evaluate applications without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran . click apply for full job details

American Career College, we share a passion for students and transforming healthcare education! As an associate for a certified Great Place to Work, you will join a collaborative, student-centric culture valuing academic integrity, mutual respect, student learning, service, responsiveness, innovation, diversity, and stewardship. As a part of this team, you will guide students to do more than change their own lives - you will help change the lives of every patient they care for throughout their career. At American Career College, you will have the opportunity to share your expertise and passion with the next generation of nurses. You will make an impact by: Overseeing and coordinating all clinical-related activities within the nursing program Managing clinical instructors, cultivating and maintaining clinical partnerships, securing and scheduling clinical placements, overseeing clinical observations, required documentation and reporting, and ensuring compliance with college and accreditation standards Supporting clinical faculty in meeting course objectives and ensures that students successfully complete clinical assignments while maintaining the integrity and quality of the clinical education experience Your Experience Includes: Must have a minimum of three (3) years of experience as a registered nurse; one (1) year shall be in teaching or clinical supervision, or a combination thereof, in a state approved registered nursing, vocational or practical nursing, or psychiatric technician school within the last five (5) years; or a minimum of three (3) years of experience in nursing administration or nursing education within the last five (5) years. Leadership knowledge in the program field to cultivate a learner-centered environment and to foster excellence. Knowledge in technological support and delivery of program area and services. Knowledge and evidence of strong supervisory and management skills as applicable to specialized program area. Knowledge of state, federal and local laws/regulations relating to programs, governmental compliance and other regulatory standards such as Title IV, ABHES, BVNPT, BPPE, and other accreditation standards. Education/Licensure: Hold a minimum of a baccalaureate degree in nursing or a related field from an academic institution accredited by a regional or national accrediting agency that is recognized by the US Secretary of Education or Council for Higher Education Accreditation (CHEA). Must have completed a course or courses offered by an accredited school with instruction in administration, teaching, and curriculum development. Current unencumbered California Registered Nurse (RN) License is required. Must have approval by the Board of Vocational Nursing and Psychiatric Technicians (BVNPT) prior to assuming the role of Assistant Director of Nursing. Must possess a Certificate of Completion of a course in teaching methodology of at least 30 hours. Current CPR Card. Campus: ACC Orange County Campus La Palma Function: Faculty