Description Summary: Responsible for completing tasks associated with inventory control such as scanning products, picking orders, and restocking par carts, inventory locations, and point of use systems. Additional responsibilities can include receiving supplies, verifying data accuracy, re-ordering supplies. Responsible for troubleshooting critical supply issues. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Perform Supply Chain Technician tasks. Assess critical supply issues. Audit and verify supply receipts of stocked items to avoid outages and/or receiving issues. Receive incoming materials, supplies and equipment. Compare information on packing slip with the purchase order to verify accuracy of the shipment. Inspect shipments for damages or defects. Utilize scanning technology for par scanning, receiving, documentation for purchase orders, and AP process completion. Perform cycle counts, bin audits, and verify reorder reports and quantities. Review transactions ensuring accurate posting. Package and process shipments following the appropriate process to other locations and vendors. Perform tasks in INFOR (ERP System) appropriately including transactions in Par Specialist, Purchasing Receiver, Inventory Management, Warehouse Clerk, and MSCM Ensure unreleased transactions are completed daily as appropriate. Deliver supplies to departments including procedural areas, critical care, and nursing while ensuring compliance with JCHAO policies. Possess critical thinking skills related to tasks and operation. Work with procurement following up on overdue orders and backorders. Provide customer service, including all necessary follow up tasks to ensure correct products are delivered timely, efficiently, and accurately. Basic computer knowledge. Ability to communicate effectively, both verbally and in writing. Ability to adapt to different situations while maintaining exceptional decision-making skills. Other duties as assigned by management. Job Requirements: Education/Skills High School Diploma or equivalent preferred Experience 2-3 years of relevant work experience preferred 1 year of supply chain experience preferred (IC, Procurement, Planning, Operations) Hospital supply chain experience preferred. Licenses, Registrations, or Certifications None Required Work Schedule: 7AM - 5PM Work Type: Full Time
06/07/2026
Full time
Description Summary: Responsible for completing tasks associated with inventory control such as scanning products, picking orders, and restocking par carts, inventory locations, and point of use systems. Additional responsibilities can include receiving supplies, verifying data accuracy, re-ordering supplies. Responsible for troubleshooting critical supply issues. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Perform Supply Chain Technician tasks. Assess critical supply issues. Audit and verify supply receipts of stocked items to avoid outages and/or receiving issues. Receive incoming materials, supplies and equipment. Compare information on packing slip with the purchase order to verify accuracy of the shipment. Inspect shipments for damages or defects. Utilize scanning technology for par scanning, receiving, documentation for purchase orders, and AP process completion. Perform cycle counts, bin audits, and verify reorder reports and quantities. Review transactions ensuring accurate posting. Package and process shipments following the appropriate process to other locations and vendors. Perform tasks in INFOR (ERP System) appropriately including transactions in Par Specialist, Purchasing Receiver, Inventory Management, Warehouse Clerk, and MSCM Ensure unreleased transactions are completed daily as appropriate. Deliver supplies to departments including procedural areas, critical care, and nursing while ensuring compliance with JCHAO policies. Possess critical thinking skills related to tasks and operation. Work with procurement following up on overdue orders and backorders. Provide customer service, including all necessary follow up tasks to ensure correct products are delivered timely, efficiently, and accurately. Basic computer knowledge. Ability to communicate effectively, both verbally and in writing. Ability to adapt to different situations while maintaining exceptional decision-making skills. Other duties as assigned by management. Job Requirements: Education/Skills High School Diploma or equivalent preferred Experience 2-3 years of relevant work experience preferred 1 year of supply chain experience preferred (IC, Procurement, Planning, Operations) Hospital supply chain experience preferred. Licenses, Registrations, or Certifications None Required Work Schedule: 7AM - 5PM Work Type: Full Time
Description Summary: This role will support and provide project direction to other associates including training on ERP systems. Responsible for supporting and enhancing department processes by providing excellent service as well as support on process and task knowledge to other associates. This includes but is not limited to par scanning, order picking, cycle counting, and transaction processing. Provides analytical support for reports and identifies process improvement opportunities. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Perform Materials Management Technician tasks Make decisions based on knowledge base requesting support as needed Master INFOR modules appropriately (according to assignment) including Par Specialist, Purchasing Receiver, Inventory Management, Warehouse Clerk, and Mobile Supply Chain Mgmt. Assist with value analysis teams including working with new item/technology requests, vetting, and working with teams through approval setup or denial Work system reports ensuring compliance and accuracy of facility data and transactions Support consignment process by obtaining agreements and exhibit forms and ensuring appropriate tracking of items and documents Ensure item setup in all local systems with a high level of accuracy working with system MDM Follow written instructions with a high degree of accuracy Provide operational understanding of sourcing acting as a resource for coordination of selections and the securing of products in emergent situations Provide education on supply chain processes Troubleshoot requisition, order, invoice, and process issues Use Microsoft Office suite including Word, Excel, and Outlook Use communication and analytical skills to provide project support Work with all aspects of supply chain including procurement, AP, and representatives to support daily operations and improve processes Work with leadership to determine appropriate subs as needed by working with other MM staff, system leaders, and local clinical staff Assist with CLP rollouts by working process steps as defined Support materials and clinical staff with high level of product knowledge Provide excellent customer service Proficient computer skills and familiarity with automated systems Must be able to read and interpret computer reports and listings Must have good communication skills and arithmetic ability Ability to operate in a complex dynamic environment Ability to handle multiple tasks simultaneously Knowledge of ERP systems Other duties as assigned by management Job Requirements: Education/Skills High School Diploma or equivalent required Associate degree preferred Experience Recommended 3-4 years of relevant work experience 2-3 years of demonstrated computer experience preferred 1 year of supply chain experience preferred Medical product and equipment knowledge preferred Inventory database management experience preferred Hospital supply chain experience preferred Licenses, Registrations, or Certifications None Required Work Schedule: 5 Days - 8 Hours Work Type: Full Time
06/07/2026
Full time
Description Summary: This role will support and provide project direction to other associates including training on ERP systems. Responsible for supporting and enhancing department processes by providing excellent service as well as support on process and task knowledge to other associates. This includes but is not limited to par scanning, order picking, cycle counting, and transaction processing. Provides analytical support for reports and identifies process improvement opportunities. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Perform Materials Management Technician tasks Make decisions based on knowledge base requesting support as needed Master INFOR modules appropriately (according to assignment) including Par Specialist, Purchasing Receiver, Inventory Management, Warehouse Clerk, and Mobile Supply Chain Mgmt. Assist with value analysis teams including working with new item/technology requests, vetting, and working with teams through approval setup or denial Work system reports ensuring compliance and accuracy of facility data and transactions Support consignment process by obtaining agreements and exhibit forms and ensuring appropriate tracking of items and documents Ensure item setup in all local systems with a high level of accuracy working with system MDM Follow written instructions with a high degree of accuracy Provide operational understanding of sourcing acting as a resource for coordination of selections and the securing of products in emergent situations Provide education on supply chain processes Troubleshoot requisition, order, invoice, and process issues Use Microsoft Office suite including Word, Excel, and Outlook Use communication and analytical skills to provide project support Work with all aspects of supply chain including procurement, AP, and representatives to support daily operations and improve processes Work with leadership to determine appropriate subs as needed by working with other MM staff, system leaders, and local clinical staff Assist with CLP rollouts by working process steps as defined Support materials and clinical staff with high level of product knowledge Provide excellent customer service Proficient computer skills and familiarity with automated systems Must be able to read and interpret computer reports and listings Must have good communication skills and arithmetic ability Ability to operate in a complex dynamic environment Ability to handle multiple tasks simultaneously Knowledge of ERP systems Other duties as assigned by management Job Requirements: Education/Skills High School Diploma or equivalent required Associate degree preferred Experience Recommended 3-4 years of relevant work experience 2-3 years of demonstrated computer experience preferred 1 year of supply chain experience preferred Medical product and equipment knowledge preferred Inventory database management experience preferred Hospital supply chain experience preferred Licenses, Registrations, or Certifications None Required Work Schedule: 5 Days - 8 Hours Work Type: Full Time
Job Details Division: Rytec Corporation Location: Hartford, WI, United States Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Basic Job Functions: SUMMARY: The Order Fulfillment Specialist is responsible for assembling kits as needed and preparing parts for shipment utilizing UPS and FedEx systems. Duties include preparing and crating orders by processing requests according to the bill of materials; pulling parts; preparing parts for shipment or assembly kits; verify accuracy of order; and complete associated electronic transactions in warehouse management system prior to parts leaving the area. ESSENTIAL FUNCTIONS: Read and follow computerized instructions for pick and packing work order items. Gather parts for shipment ensuring the type and quantity of parts match the order, inspect product and remove defective parts, record and document parts for shipment, package parts according to the order, utilize small package shipment systems as provided by carriers to create tracking labels, create supporting shipping documentation, move order to delivery area. Continually checking for completeness of work order requirements and components. Organize and restock all products as needed on shelves in the UPS area. Maintain an adequate inventory of stock items and communicate shortages to Shop Supervisor. Assist with physical inventory on a regular basis. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: Ability to work the 1st shift schedule of 7:00am - 3:30pm Monday - Friday. Excellent oral and written communication skills in order to interact with employees. Ability to read and interpret work instructions. Ability to lift 50 - 75 pounds frequently. Ability to squat, kneel and stand frequently. High attention to detail and excellent organizational skills. Ability to be trainiend on and use nail and staple guns. Ability to be trained on pallet jacks and forklift for material handling purposes. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers and/or other employees of the organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Preferred Qualifications: Experience with UPS, UPS world ship, FedEx and shipment of hazardous materials is highly desired. Working knowledge of SAP preferred. High school diploma or general education degree (GED) desired; one to three months related experience and/or training; or equivalent combination of education and experience. Previous experience with pallet jacks and forklift for material handling purposes is a huge plus. Expeience with staple and nail guns and other hand and power tools. Nucor is an Equal Opportunity Employer and a drug-free workplace
06/06/2026
Full time
Job Details Division: Rytec Corporation Location: Hartford, WI, United States Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Basic Job Functions: SUMMARY: The Order Fulfillment Specialist is responsible for assembling kits as needed and preparing parts for shipment utilizing UPS and FedEx systems. Duties include preparing and crating orders by processing requests according to the bill of materials; pulling parts; preparing parts for shipment or assembly kits; verify accuracy of order; and complete associated electronic transactions in warehouse management system prior to parts leaving the area. ESSENTIAL FUNCTIONS: Read and follow computerized instructions for pick and packing work order items. Gather parts for shipment ensuring the type and quantity of parts match the order, inspect product and remove defective parts, record and document parts for shipment, package parts according to the order, utilize small package shipment systems as provided by carriers to create tracking labels, create supporting shipping documentation, move order to delivery area. Continually checking for completeness of work order requirements and components. Organize and restock all products as needed on shelves in the UPS area. Maintain an adequate inventory of stock items and communicate shortages to Shop Supervisor. Assist with physical inventory on a regular basis. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: Ability to work the 1st shift schedule of 7:00am - 3:30pm Monday - Friday. Excellent oral and written communication skills in order to interact with employees. Ability to read and interpret work instructions. Ability to lift 50 - 75 pounds frequently. Ability to squat, kneel and stand frequently. High attention to detail and excellent organizational skills. Ability to be trainiend on and use nail and staple guns. Ability to be trained on pallet jacks and forklift for material handling purposes. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers and/or other employees of the organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Preferred Qualifications: Experience with UPS, UPS world ship, FedEx and shipment of hazardous materials is highly desired. Working knowledge of SAP preferred. High school diploma or general education degree (GED) desired; one to three months related experience and/or training; or equivalent combination of education and experience. Previous experience with pallet jacks and forklift for material handling purposes is a huge plus. Expeience with staple and nail guns and other hand and power tools. Nucor is an Equal Opportunity Employer and a drug-free workplace
Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet requirements of MIL-STD 129N. Primary Responsibilities: Perform Inventory actions Identify, examine, classify, accept, reject, and dispose of material as per DLA regulations. Examinations may be visual or require measuring devices and techniques under supervision of senior staff or management. Load material on and off skids, pallets, and stands. Operate tools and equipment in performance of duties. Receive data from and input data to DSS and other automated supply systems in performance of duties. Operate Material Handling Equipment (MHE) as assigned and hold appropriate license. Count, weigh, record data, apply tags and labels. Use basic processes of inspection/examination procedures for material. Read specifications, drawings, prints, schematics and photographs. Prepare reports relating to distribution functions. Make preventive maintenance adjustments to related equipment. Perform all other duties as assigned. Supervisory Responsibilities: There are no supervisory duties associated with this position. Education and/or Experience: High School Diploma or GED required 2 years specific experience in material handling, supply, distribution, inspection, or related areas. Knowledge, Skills, and Abilities: Proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site. Proficient with Microsoft Suite products including, Word, Excel, Access and Outlook software. Demonstrate a good attitude and ability to work as a member of a team. Ability to multi-task efficiently, work in a fast paced environment on multiple projects, and have a strong attention for detail. Ability to acquire license to use Material Handling Equipment (MHE). Certificates, Licenses, Registrations: Material Handling Equipment (MHE) license. Must be certified to operate MHE in accordance with manufacturer guidelines. Operators must be able to safely access, control, and operate the equipment within all physical design and safety limitations defined by the manufacturer. Security Clearance: Position requires U.S. Citizenship, a US Government background check and may require a US Government SECRET Clearance If SECRET Clearance Level is required, candidate must also: Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation Be able to maintain a US Government SECRET clearance Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law. PIb11fa-6554
06/05/2026
Full time
Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet requirements of MIL-STD 129N. Primary Responsibilities: Perform Inventory actions Identify, examine, classify, accept, reject, and dispose of material as per DLA regulations. Examinations may be visual or require measuring devices and techniques under supervision of senior staff or management. Load material on and off skids, pallets, and stands. Operate tools and equipment in performance of duties. Receive data from and input data to DSS and other automated supply systems in performance of duties. Operate Material Handling Equipment (MHE) as assigned and hold appropriate license. Count, weigh, record data, apply tags and labels. Use basic processes of inspection/examination procedures for material. Read specifications, drawings, prints, schematics and photographs. Prepare reports relating to distribution functions. Make preventive maintenance adjustments to related equipment. Perform all other duties as assigned. Supervisory Responsibilities: There are no supervisory duties associated with this position. Education and/or Experience: High School Diploma or GED required 2 years specific experience in material handling, supply, distribution, inspection, or related areas. Knowledge, Skills, and Abilities: Proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site. Proficient with Microsoft Suite products including, Word, Excel, Access and Outlook software. Demonstrate a good attitude and ability to work as a member of a team. Ability to multi-task efficiently, work in a fast paced environment on multiple projects, and have a strong attention for detail. Ability to acquire license to use Material Handling Equipment (MHE). Certificates, Licenses, Registrations: Material Handling Equipment (MHE) license. Must be certified to operate MHE in accordance with manufacturer guidelines. Operators must be able to safely access, control, and operate the equipment within all physical design and safety limitations defined by the manufacturer. Security Clearance: Position requires U.S. Citizenship, a US Government background check and may require a US Government SECRET Clearance If SECRET Clearance Level is required, candidate must also: Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation Be able to maintain a US Government SECRET clearance Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law. PIb11fa-6554
BE A PART OF A GREAT TEAM WITH GROWING OPPORTUNITIES! Why Work for PSE GROUP? Full Time Pay: $13- $15 per hour Weekday schedule 8am-4:30pm Weekends off 401(k) program with company match Generous benefits package for full time employees: Medical, Dental and Vision Company paid life and disability insurance 3 weeks Paid Time Off Competitive compensation program A great work environment with career advancement opportunities! As a Delivery Driver , this position will deliver paint, and related products, to LOCAL PSE customers. In addition, the candidate will assist with various tasks at the store when not making deliveries. About PSE Group: PSE Group is a nationwide team of coatings specialists dedicated to providing exceptional products and value-added services to our customer partners. PSE Group offers a wide range of coatings solutions to enhance our customers' productivity, improve quality, and reduce material cost. Our objective is to support the entire purchasing process from coatings to associated products to complete application systems. We provide comprehensive solutions to meet our customers' needs. PSE Group includes brands from across the country including: Painters Supply & Equipment Co, Nyquist Paints, FAMIS, Aerocoat Source, ABC Autobody Color, Auto Paint Supply, Carolina Automotive Refinish Supply, Charlottesville Automotive Refinish Supply, Golden Isles Paint & Supply, Interbay Coatings, ProWood Finishes, RMS Pro Finishes, Specialty Coatings Inc., Strand's Industrial Coatings, United Sales Company, and Wyrick Company. Essential Duties: Operate vehicle in accordance with all state and federal laws while maintaining an acceptable personal driving record. Maintain company vehicle. Alert supervisor as to truck's repair and servicing needs. Know paperwork flow and provide delivery documents as required. Alert Sales Representatives to possible sales leads given by customers or potential customers. Clean and maintain all areas and equipment as assigned. Make delivery of product as needed ensuring customers' quality and service expectations are met. Load merchandise to ensure safety and security. Unload deliveries at Customer site as directed by the Customer. Validate correct shipment with the responsible individual at the customer site. Return materials, color matches, and tools for repair from customers to Store and/or Warehouse. Load merchandise to ensure safety and security. Conduct self in professional manner to ensure customers' quality and service expectations are met. Additional Duties: Prepare paint orders, including mixing, utilizing standard formulas and custom formulas. Assist in filling orders including proper staging per Company/store policy. Pick up merchandise from local vendors as needed. Assist with inside customer service, as needed, including servicing customers and/or processing their orders. Answer telephone in a professional manner, answer questions knowledgeably and/or take customers order. Load/unload merchandise from trucks. Match packing sips with purchase orders. Properly dispose of waste cans and product in compliance with Company and Governmental regulations. Assist staff with periodic or annual store inventories. Any additional duties or special projects as assigned. Requirements : Must be licensed to operate vehicle in accordance with state, federal, and provincial law. Must have acceptable driving record from DMV/MTO. Must be able to continuously lift up to 70 pounds Candidates must submit to a drug screen and meet acceptable Motor Vehicle Report requirements upon the hiring process. We are and Equal Opportunity/ Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Retirees are encouraged to apply . Compensation details: 13-15 Hourly Wage PI24db8a4707d0-9412
06/05/2026
Full time
BE A PART OF A GREAT TEAM WITH GROWING OPPORTUNITIES! Why Work for PSE GROUP? Full Time Pay: $13- $15 per hour Weekday schedule 8am-4:30pm Weekends off 401(k) program with company match Generous benefits package for full time employees: Medical, Dental and Vision Company paid life and disability insurance 3 weeks Paid Time Off Competitive compensation program A great work environment with career advancement opportunities! As a Delivery Driver , this position will deliver paint, and related products, to LOCAL PSE customers. In addition, the candidate will assist with various tasks at the store when not making deliveries. About PSE Group: PSE Group is a nationwide team of coatings specialists dedicated to providing exceptional products and value-added services to our customer partners. PSE Group offers a wide range of coatings solutions to enhance our customers' productivity, improve quality, and reduce material cost. Our objective is to support the entire purchasing process from coatings to associated products to complete application systems. We provide comprehensive solutions to meet our customers' needs. PSE Group includes brands from across the country including: Painters Supply & Equipment Co, Nyquist Paints, FAMIS, Aerocoat Source, ABC Autobody Color, Auto Paint Supply, Carolina Automotive Refinish Supply, Charlottesville Automotive Refinish Supply, Golden Isles Paint & Supply, Interbay Coatings, ProWood Finishes, RMS Pro Finishes, Specialty Coatings Inc., Strand's Industrial Coatings, United Sales Company, and Wyrick Company. Essential Duties: Operate vehicle in accordance with all state and federal laws while maintaining an acceptable personal driving record. Maintain company vehicle. Alert supervisor as to truck's repair and servicing needs. Know paperwork flow and provide delivery documents as required. Alert Sales Representatives to possible sales leads given by customers or potential customers. Clean and maintain all areas and equipment as assigned. Make delivery of product as needed ensuring customers' quality and service expectations are met. Load merchandise to ensure safety and security. Unload deliveries at Customer site as directed by the Customer. Validate correct shipment with the responsible individual at the customer site. Return materials, color matches, and tools for repair from customers to Store and/or Warehouse. Load merchandise to ensure safety and security. Conduct self in professional manner to ensure customers' quality and service expectations are met. Additional Duties: Prepare paint orders, including mixing, utilizing standard formulas and custom formulas. Assist in filling orders including proper staging per Company/store policy. Pick up merchandise from local vendors as needed. Assist with inside customer service, as needed, including servicing customers and/or processing their orders. Answer telephone in a professional manner, answer questions knowledgeably and/or take customers order. Load/unload merchandise from trucks. Match packing sips with purchase orders. Properly dispose of waste cans and product in compliance with Company and Governmental regulations. Assist staff with periodic or annual store inventories. Any additional duties or special projects as assigned. Requirements : Must be licensed to operate vehicle in accordance with state, federal, and provincial law. Must have acceptable driving record from DMV/MTO. Must be able to continuously lift up to 70 pounds Candidates must submit to a drug screen and meet acceptable Motor Vehicle Report requirements upon the hiring process. We are and Equal Opportunity/ Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Retirees are encouraged to apply . Compensation details: 13-15 Hourly Wage PI24db8a4707d0-9412
