51 jobs found

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

SJS Industrial, a veteran owned media blasting, industrial painting, powder coating, and light fabrication shop in Virginia Beach, VA, that serves military and maritime customers, is seeking to add a full-time Delivery Driver/ Warehouse Worker to work Monday through Friday from 6:00 AM to 2:30 PM. Each 8-hour shift also includes a 30-minute unpaid meal break. If a resume is not provided, you will not be considered. Saturday or evening shifts might happen occasionally if there is a special project with a tight deadline, but the goal is a steady and reliable Monday through Friday 40-hour work week to avoid weekend, night-time, and overtime work. The Salary for this position is $20.00/hr. SJS also offers 80 hours of PTO accrual, medical, dental, vision, and a variety of additional benefits including 7 paid holidays and 2 floating holidays. The ideal candidate for this position is safety conscious and possesses two (2) to three (3) years' of driving experience providing delivery services using a box truck and/or flatbed truck, is insurable with a clean driving record, has operated a forklift safely in a warehouse before and is certified to do so, and understands how to protectively pack and arrange materials for secure transport. Responsibilities: Safe and accident-free operation of box trucks, pickup trucks, flatbed trucks, and/or forklifts to transport goods Facilitates the flow of material between the production shop/warehouse and various customer locations including Military/Federal installations and commercial businesses Drives a 26-foot truck (flat bed and box truck) locally, ensuring timely delivery of finished products Lifting: Must be able to lift and carry objects up to 50 pounds frequently, and occasionally items that 50+ pounds Pulling/Pushing: Will transport loads of up to 50 pounds frequently, and occasionally items that are 50+ pounds Employee will be trained on and is expected to consistently follow all standard vehicle and equipment operating procedures (SOPs) Safely operate and carefully maneuver forklifts inside the warehouse and outdoors in the yard, abiding by all SOPs and taking care to not harm people or damage equipment or property Operate or assist in operating machines and various hand tools in accordance with SOPs Accurately record delivery and pickup information and maintain timely and accurate records; some data may be captured using a barcode scanner Inspect packaged items before transport to ensure packaging is appropriate for safe transport; recommend or apply additional packaging to protect customer property; load items to ensure stability of each load during transport, such as placing heavier items on the bottom with lighter items layered on top, if items are stackable Must be able to remain on one's feet in an upright position and move about on foot for duration of shift. Will often need to bend, twist, squat, stoop, kneel, crouch, and reach at or above shoulder level. Demonstrate a positive and professional attitude, including having a positive customer service orientation when interacting with customers Attend and successfully complete all required safety, production, forklift certification, and related industrial training sessions; always wear required Personal Protective Equipment (PPE); observe all safety rules and laws; and maintain a clean driving record for continued employment Perform additional driving or material handling duties as requested by the Production Manager or SJS Industrial Director. Qualifications: Must be a US Citizen Must be insurable, meaning driving record must be clean enough for our company vehicle insurance to provide coverage; any candidates who are rejected for coverage by the insurance company cannot be hired. At least three (3) to five (5) years' safe and accident-free driving experience performing pickups and deliveries of goods Current, valid Virginia's State Driver license. A Commercial Driver's License (CDL) is a plus that may result in a higher pay rate, but not a requirement. Must have prior experience operating a forklift in a warehouse or industrial environment and must be capable of attaining and maintaining forklift certification during employment Must be able to successfully pass a drug test and a thorough background check with clean Department of Motor Vehicles (DMV) check for access onto a military installation ; please note the background check for this position extends past 7 years, in conformance with federal law and US Department of Justice guidelines for work on a military installation. SJS Industrial, LLC (SJS), also doing business as SJS Executives, is an equal opportunity employer and does not discriminate based on race, color, ethnicity, religion, sex (including pregnancy status and/or gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, parental status, military service, or other non-merit factors. 6:00 AM to 2:30 PM Compensation details: 20 Hourly Wage PI488652bcefe0-9760

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Description: The primary function of this role is to direct and coordinate the delivery of materials to customers in the day-to-day operations. The Dispatcher adheres to and promotes corporate policies and manages the general use of equipment, trucks, delivery personnel and materials. This employee directs all activities that concern delivery, warehouse and facilities. DUTIES AND RESPONSIBILITIES: Scheduling and dispatching of crews to maximize time efficiency Responsible for the fast and accurate processing of sales orders Key holder responsibility for opening and closing of yard Checking delivery trucks for accurate product Fielding phone calls from sales and customers for delivery status Trains new helpers on how to perform job safely and correctly Responsible for office/dispatch and yard/warehouse cleanliness Performs job in a safe manner Other tasks as assigned by management OTHER COMPETENCIES: Ability to self-manage, show initiative and be proactive Possess a strong ability to focus and follow-through Communicate professionally, both verbally and in writing, to co-workers and customers Requirements: BASIC QUALIFICATIONS: High school diploma, required Minimum 2 years of related work experience Microsoft Office Skills and/or the ability to learn Ability to quickly and accurately perform basic math skills Ability to quickly read a road/geographical map and communicate directions Organization skills demonstrated in job performance Demonstrated ability to follow instructions with limited guidance PHYSICAL DEMANDS: Must be able to remain in stationary position 70% Must be able to operate basic office equipment Must be able to communicate with team and management and be able to exchange accurate information in these situations MENTAL DEMANDS: Must be able to problem solve and prioritize tasks Must be able to manage stress depending on tasks Must be able to multitask Must be able to receive and analyze all information Must be able to quickly communicate solutions if problems occur Must be able to demonstrate a high degree of sound judgement PI197b107a401c-8641

Description: Build Relationships. Serve Essential Industries. Protect Public Health. Are you a skilled B2B sales professional looking for an opportunity to make a real impact while building a rewarding career? Sprague Pest Solutions is seeking a strategic, relationship-driven sales leader to expand our presence across the Phoenix-Tucson metropolitan corridor-one of the Southwest's fastest-growing and most economically diverse regions. This market blends large-scale distribution and logistics, food production and cold storage, healthcare, education, hospitality, and expanding commercial and multifamily development. If you understand the operational pressures faced by high-volume, compliance-driven businesses and excel at consultative selling, we want to connect. At Sprague, we don't just sell pest control-we deliver peace of mind. This is your chance to partner with mission-critical industries to protect operations, ensure regulatory compliance, and safeguard public health. Our clients include food processors, healthcare and senior-living facilities, hospitality properties, warehouses, and commercial real estate operators that depend on reliable, proactive service in a demanding desert environment. If you're motivated by building long-term partnerships and delivering practical, science-based solutions that truly matter, we'd love to hear from you. What you'll do: Drive Strategic Growth: Prospect and build relationships with commercial clients in food and beverage processing, manufacturing and production, transportation and logistics, wholesale and retail operations, and agri-business sectors. Consult & Solve: Understand complex operational environments and regulatory pressures (FDA, USDA, GMP, FSMA) to deliver tailored pest prevention solutions. Own the Relationship: Manage accounts from initial contact through implementation, ensuring long-term satisfaction and compliance support. Collaborate Across Teams: Partner with technical specialists, entomologists, and service teams to deliver measurable results and maintain high service standards. Represent Sprague: Conduct site inspections, deliver professional presentations, and uphold our brand values in every interaction. What We're Looking For: Proven success in B2B sales, especially in advanced manufacturing, warehousing, distribution, logistics, food processing, public health, hospitality or tourism. Strong communication, negotiation, and relationship-building skills Self-starter with a drive to exceed goals and grow territory Ability to work independently and as part of a collaborative team Familiarity with the business landscape of Phoenix, Chandler, Tempe, Mesa & the Southeast Valley Why Sprague? Sprague Pest Solutions is a leader in commercial pest management, protecting food, health, and property across the Western U.S. We're committed to innovation, sustainability, and excellence in everything we do. Competitive base salary ($55,000-$65,000) + uncapped commission (Sales reps hitting target earn $80,000-$100,000 in their first year) Company vehicle, phone, and laptop Comprehensive training and ongoing professional development Supportive team culture and mission-driven work Opportunities for advancement in a growing company Benefits: Health, Vision, Dental Insurance within 30 days of hire 401K after 1 year, with 100% match up to 3% plus 50% match up to 6% Paid time off: Sick time available day 1, holiday and vacation time after 90 days Childcare assistance and college savings plan All offers of employment are contingent upon a satisfactory motor vehicle record report that is checked annually. Sprague Pest Solutions is an Equal Opportunity employer and promotes diversity through a culture of inclusion and opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristics protected by law. We are a drug and smoke-free environment. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Requirements: Must haves for this job: High school diploma or equivalent Valid driver's license and satisfactory motor vehicle record Attention to detail and high standards of work quality Hunger for knowledge and professional development Competitive approach to both individual and team performance Nice to haves for this job: Bachelor's degree in Business, Marketing, or a related field 2+ years' proven success in Business-to-Business or related sales experience Prior experience in the Pest Control industry Experience with SalesForce Pre-Hire Screening Requirements: 5+ years Satisfactory Motor Vehicle Record Criminal Background Check: Federal, State, County Employment and Education verification DOT Physical with 5-Panel Drug Screen Detailed Job Requirements: Position Title: Account Manager / Sales Representative Reports To: Branch Manager Travel: 10% FLSA Status: Exempt Exemption: Outside Sales EEOC Class: Sales Workers Salary: $55,000-$65,000 plus commissions Position Summary: The primary function of the Outside Sales and Account Representative is to sell pest prevention services to commercial organizations. The Account Rep utilizes a consultative sales approach to understand the client's unique challenges and propose solutions to meet active pest control problems and ongoing maintenance needs. The Sales Rep works closely with managers and specialty teams to ensure appropriate pricing structures for proposed solutions, service excellence, and customer satisfaction. Essential Duties & Responsibilities: Drive new business opportunities by prospecting, developing leads, and cold calling Develop leads, maintain a list of prospective customers, and identify opportunities to expand client service offerings Build and foster a network of referrals to generate leads and growth opportunities Optimize the sales cycle to drive the business forward at every step of the sales process Develop long-lasting relationships with clients by maintaining Sprague's core tenets of integrity and customer service Develop strong internal relationships with operations, marketing, and other corporate departments Foster customer loyalty by delivering pest control solutions according to local regulations and company protocols related to pesticide application and pest management Represent the Sprague brand by driving a company vehicle from home, work, and client locations or at trade shows Inspect client sites, partnering with branch managers and technicians to fully understand the client's unique business and facility challenges Develop proposals according to Sprague's pricing strategy Write clear, concise reports, proposals, and presentations; assist in responding to RFPs Deliver professional presentations or demonstrations to clients, prospective clients, and industry contacts Coordinate sales efforts with marketing, sales management, operations, and technical services, including but not limited to: market, territory, and competitive analyses, annual pricing reviews, specialty projects and bids, and sales action planning Effectively communicate value and benefits of Sprague products and services to overcome client objections and close deals Conduct regular business reviews with existing clients to ensure satisfaction, explore changing or emerging needs, and recommend solutions that maximize value for the customer at a fair and profitable price point Introduce service team and specialists to prospective and existing clients early in the sales process to build strong relationships and facilitate seamless transitions in account support Other duties as assigned Knowledge, Skills, and Abilities Active listening skills and the ability to understand the points being made and ask questions to clarify the situation Complex problem-solving and the ability to review detailed information to evaluate options and implement solutions Critical thinking and the ability to identify the strengths and weaknesses of alternative solutions Ability to communicate effectively verbally and in writing with customers, peers, and managers Ability to navigate conflict, recommend options, and facilitate solutions that best serve the customer and the company's objectives and values Ability to set priorities and manage time to accomplish work goals according to quality standards and deadlines Ability to adapt quickly and work effectively in a competitive market Ability to perform effectively with minimal direction, self-direct work, and escalate problems to manager where appropriate Attention to detail and ability to recognize and correct errors and inconsistencies Ability to travel within territory and to Sprague's Home Office Proficiency in CRM software Proficiency in computer software and systems including . click apply for full job details

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.

Summary: Responsible for all general warehouse functions including loading, unloading, manual depal, receiving, put-a-way, pulls and replenishments, and selection of product when qualified and as needed in accordance with Preferred Work Methods (PWMs). Each function requires specific equipment and/or process certification. Requires working in freezer, cooler and dry warehouse environments with extreme cold and/or warm temperatures. Performs all duties safely, accurately and meets set productivity standards and goals Essential Duties and Responsibilities: Follow warehouse management system directed tasking to transport pallets of product safely between staging areas (docks, pack/holds, manual depal area and storage areas (rack) following established PWMs. Put away product using material handling equipment (MHE), primarily a reach forklift. Inspect product being moved for shortages, damage, quality, or deterioration of packing and report to supervisor. Replenish product to full pallet or hand stack pick location/slot from reserve location following directed tasking and established PWMs. Remove shrink wrap, bands or tape when placing a pallet into a selection location (for replenishments). Ensure pallets are secured with shrink wrap for effective delivery to a door or staging area and to rack storage (for puts). When carrying multiple pallets, pallet with heavier items should be transported on the bottom and pallet with lighter items should be placed on the top to prevent damage to lighter product. Deliver stacked pallets to assigned area on loading dock in an effort to ensure that products are accurately staged and can be systematically loaded. Must successfully complete the forklift operator certification process and testing and be able to perform the PWMs. Work effectively with immediate supervisor to minimize warehouse shrink/damage (product loss). Responsible for the neatness and cleanliness of assigned work areas and travel aisles, and the accuracy of warehouse locations. Report any unfixable/unsafe issues immediately to supervisor. Observe and enforce all safety rules to eliminate accidents and injuries. Operate appropriate MHE, such as forklifts and pallet jacks, in a safe and orderly manner to eliminate accidents and injuries. Observe proper lifting techniques and physical work practices in accordance with established PWMs. Ensure that MHE is maintained (perform daily inspection) and clean; report repair or service needs to supervisor to minimize equipment damage and down time. Use warehouse computers and RF equipment in a safe and professional manner to avoid damage to equipment. Understand and comply with all applicable Company policies (i.e. attendance, Code of Business Conduct & Ethics, Associate Handbook, etc. Comply with all applicable State/Federal laws, regulations, and policies (i.e. OSHA Occupational Health and Safety Administration , HACCP Hazard Analysis and Critical Control Points , etc.). Supports food safety policies, standard operating procedures, and prerequisite food safety control programs that meet legal and quality requirements and industry best practices as defined in our Food Safety Commitment documentation. Performs other warehouse duties as assigned. Supervisory Responsibilities: None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be at least 18 years of age. Must pass a functional capacity test. Must be able to work effectively in a team environment. Must be able to communicate effectively with supervision, management and co-workers. Must be able to observe and to communicate those observations verbally and in written form to others responsible for the equipment operation and maintenance. Education and Experience: High school diploma or General Education Degree (GED) preferred; six months previous forklift experience required . Reach truck experience preferred. Material handling equipment experience preferred. Crown and/or Raymond reach truck experience a plus. Language Skills: Must have ability to read and comprehend simple instructions, short correspondence, and memos. Must have ability to read and write simple correspondence. Must have ability to speak effectively in one-on-one and in a small group situations and to respond to questions from managers, associates, and peers. Mathematical Skills: Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Must have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Must have ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Certification on material handling equipment is required, or the ability to become certified. Physical Requirements of the Position: The physical demands described herein are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. An individual should contact his or her supervisor or the Human Resources Department if he or she believes that an accommodation is needed. While performing the duties of this job, the associate is regularly required to use hands to finger, handle or feel objects, tools, or controls. The associate is frequently required to stand, walk, reach with hands and arms, and talk and hear. The associate is required to stoop, kneel, crouch or sit. The associate must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Job is performed in a warehouse/operations environment. While performing the duties of this job, the associate is frequently exposed to fast moving material handling equipment or other mechanical equipment, extreme cold or heat in freezer/cooler warehouse environments including temperature of zero degrees. The associate is regularly exposed to wet and/or humid conditions, contained toxic or caustic chemicals, low voltage electrical equipment and vibration. The noise level in the work environment usually is loud. Work hours: This is a full-time position. The incumbent must have the ability to work a varying schedule which might include shift work (days or nights), weekdays or weekends, and some holidays. Work hours may vary or change based on customer order, departmental or business requirements. Travel: The position does not require travel. The above statement reflects the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation.