How You Will Make an Impact The Manufacturing Engineer (Welding) is responsible for developing, maintaining, and auditing weld procedures and processes used at Reading Truck Group. The Weld Engineer is responsible for advancing the welding process at Reading Truck Group by developing, specifying, evaluating, implementing and expanding the use of new welding technologies. The Nuts and Bolts Define, specify and maintain the welding and joining procedures and processes to optimize manufacturing process safety, quality and efficiency Advance the welding processes and Readings' manufacturing competitiveness through the implementation of robotics and automation for welding and joining initiatives at Reading Truck Group locations Project manage welding and joining projects Design and analyze labor and space requirements, product design, quality requirements, workflow, layout of equipment and workspace to maximize efficiency, consistency and effectiveness of welding operations and projects Collaborate with design and manufacturing teams to design processes that produce product within product and process specifications Review and analyze product sketches, designs, models, and drawings to make recommendations to improve in weld-ability and manufacturability Promote company safety policies and develop technical solutions to improve operational safety Work with maintenance team, and outside contractors to implement new equipment and processes, improve performance, and minimize equipment downtime Actively support in the daily activities of production teams Provide design support for welding and joining projects Support and participate in lean initiatives, and develop the welding and joining processes to provide customers with products that meet or exceed customer requirements and drive continuous safety, quality and productivity improvements Assist in response to infant warranty claims and quality issues with root cause analysis and corrective actions Monitor and optimize the use of consumables in the welding, joining and grinding operations Champion a welding steering committee; Oversee and present periodic audits for welding process equipment Oversee the certification of welders to American Welding Society (AWS) D1.1 throughout the organization Keep the leadership regular updated of the key metrics and progress of each project Responsible for estimating and executing projects within budget and on-time Perform other duties as required or directed by the management Skills and Abilities: Excellent working knowledge of assembly and welding procedures and processes Skilled is SolidWorks or 3D modeling software is preferred Proficient in Microsoft Office programs is required Excellent organizational skills Proficient Project Management skills Ability to engage peers, direct reports, and other associates to solve problems and develop improved methods, resolve issues or constraints Effective oral and written communication; excellent interpersonal skills Ability to collaborate with multiple departments Ability to work in a multi-disciplinary team Ability to oversee, guide, and train engineering technicians, maintenance personnel, and operations personnel in the areas of welding and welding technologies Position Qualifications & Requirements: Education: Bachelor's Degree in Welding, Materials Science, Metallurgical, Mechanical or Manufacturing Engineering Experience : Two (2)+ years of welding experience Five years of experience in truck body or other similar sheet metal welding industry preferred Experience with welding robotics is required Experience with Lean Manufacturing is preferred Experienced in supporting and/or implementing welding automation Familiar with DFM, DFMEA, PFMEA and their applications Certification/License: AWS CWI required, or similar How We Make an Impact At Reading Truck, we have more than 65 years of industry leadership in the manufacture, distribution, and enhancement of work truck bodies. We continue to experience rapid growth through our expanding network of more than 20 locations across North America. Take the next step in your career and come get paid to play with trucks! Some of Our Total Rewards We offer big company perks with small company culture: Comprehensive benefits package including Medical, Dental, Vision and Life 401(k) Savings Plan with Company Match Paid Parental Leave Tool Purchase Program Tuition Reimbursement Paid Time Off and 10 Observed (Paid) Holidays Generous Footwear, Eyewear, and Safety Equipment Discount Program Paid Training and Development Programs J.B. Poindexter & Co., Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. AGENCIES / THIRD PARTY RECRUITING FIRMS: Any unsolicited submissions received from third party agencies will be considered property of Reading Truck, and we will not be held liable for any fees related to those submissions. To learn more about Careers with Reading Truck visit our careers page PandoLogic. Category:Engineering,
05/02/2026
Full time
How You Will Make an Impact The Manufacturing Engineer (Welding) is responsible for developing, maintaining, and auditing weld procedures and processes used at Reading Truck Group. The Weld Engineer is responsible for advancing the welding process at Reading Truck Group by developing, specifying, evaluating, implementing and expanding the use of new welding technologies. The Nuts and Bolts Define, specify and maintain the welding and joining procedures and processes to optimize manufacturing process safety, quality and efficiency Advance the welding processes and Readings' manufacturing competitiveness through the implementation of robotics and automation for welding and joining initiatives at Reading Truck Group locations Project manage welding and joining projects Design and analyze labor and space requirements, product design, quality requirements, workflow, layout of equipment and workspace to maximize efficiency, consistency and effectiveness of welding operations and projects Collaborate with design and manufacturing teams to design processes that produce product within product and process specifications Review and analyze product sketches, designs, models, and drawings to make recommendations to improve in weld-ability and manufacturability Promote company safety policies and develop technical solutions to improve operational safety Work with maintenance team, and outside contractors to implement new equipment and processes, improve performance, and minimize equipment downtime Actively support in the daily activities of production teams Provide design support for welding and joining projects Support and participate in lean initiatives, and develop the welding and joining processes to provide customers with products that meet or exceed customer requirements and drive continuous safety, quality and productivity improvements Assist in response to infant warranty claims and quality issues with root cause analysis and corrective actions Monitor and optimize the use of consumables in the welding, joining and grinding operations Champion a welding steering committee; Oversee and present periodic audits for welding process equipment Oversee the certification of welders to American Welding Society (AWS) D1.1 throughout the organization Keep the leadership regular updated of the key metrics and progress of each project Responsible for estimating and executing projects within budget and on-time Perform other duties as required or directed by the management Skills and Abilities: Excellent working knowledge of assembly and welding procedures and processes Skilled is SolidWorks or 3D modeling software is preferred Proficient in Microsoft Office programs is required Excellent organizational skills Proficient Project Management skills Ability to engage peers, direct reports, and other associates to solve problems and develop improved methods, resolve issues or constraints Effective oral and written communication; excellent interpersonal skills Ability to collaborate with multiple departments Ability to work in a multi-disciplinary team Ability to oversee, guide, and train engineering technicians, maintenance personnel, and operations personnel in the areas of welding and welding technologies Position Qualifications & Requirements: Education: Bachelor's Degree in Welding, Materials Science, Metallurgical, Mechanical or Manufacturing Engineering Experience : Two (2)+ years of welding experience Five years of experience in truck body or other similar sheet metal welding industry preferred Experience with welding robotics is required Experience with Lean Manufacturing is preferred Experienced in supporting and/or implementing welding automation Familiar with DFM, DFMEA, PFMEA and their applications Certification/License: AWS CWI required, or similar How We Make an Impact At Reading Truck, we have more than 65 years of industry leadership in the manufacture, distribution, and enhancement of work truck bodies. We continue to experience rapid growth through our expanding network of more than 20 locations across North America. Take the next step in your career and come get paid to play with trucks! Some of Our Total Rewards We offer big company perks with small company culture: Comprehensive benefits package including Medical, Dental, Vision and Life 401(k) Savings Plan with Company Match Paid Parental Leave Tool Purchase Program Tuition Reimbursement Paid Time Off and 10 Observed (Paid) Holidays Generous Footwear, Eyewear, and Safety Equipment Discount Program Paid Training and Development Programs J.B. Poindexter & Co., Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. AGENCIES / THIRD PARTY RECRUITING FIRMS: Any unsolicited submissions received from third party agencies will be considered property of Reading Truck, and we will not be held liable for any fees related to those submissions. To learn more about Careers with Reading Truck visit our careers page PandoLogic. Category:Engineering,
In general, all Care and Maintenance Team Members are required to plan and perform all maintenance and repair operations necessary to keep plant property, equipment, machinery, and tools in good operating condition; diagnose problems and work in many varied and diversified capacities required in general care and maintenance, overhaul, and repair of plant equipment processes and facilities. Periodically perform or assist others in routine to moderately complex repairs to plant equipment and machinery. What you will do: Work involves a complete range and wide variety of duties involving diversified and difficult work using technical diagnostics, computer equipment, and a variety of precision instruments; requiring much care to effectively and efficiently diagnose, dismantle, repair, lubricate, reassemble or otherwise work on general maintenance. Diagnose causes of malfunctions by sight, sound, or actions of machinery and equipment. Start, observe, operate, or otherwise inactivate equipment to detect or verify correct functions. Inspect, adjust, clean, or lubricate equipment as preventive maintenance. Tear down, replace, repair, install, and assemble equipment, parts, components, and accessories. Operate various mechanical and electronic test equipment. Specific knowledge of pumps, conveyor systems, motors, and drives is required in the performance of regular or assigned duties. Work rotating shifts, holidays, weekends, and overtime as scheduled or required. Willing and able to maintain strict adherence to safety rules and regulations, including wearing safety equipment and completing all required training. Education and Experience you will need: Minimum High School or GED Three (3) years or more of experience installing, troubleshooting, and repairing manufacturing equipment Experience with fabrication, cutting with a torch, and welding with an arc welder Experience in a manufacturing environment Eligible to legally work in the United States Willing and able to work a 12-hour rotating schedule which will include nights, weekends, and holidays Willing and able to work on an emergency call-in basis as required Ability to work as part of a team and deliver value to the team Willingness and ability to cross-train to learn new jobs and skills Consistent, predictable attendance Our highly competitive compensation package and outstanding benefits include: Benefits starting Day 1 Competitive starting pay On-the-job training A culture that strongly believes in promoting from within Medical Dental 401k with company match Life Insurance Disability Insurance Paid vacations and holidays Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: West Fraser is a diversified North American wood products company producing southern yellow pine lumber and wood chips across the Southern US and Western Canada. We are the largest lumber producer in North America! Our employees operate in a culture that values safety first and rewards hard work. We recognize and support our team culture and focus on growing our team by promoting from within - many of our employees have built their careers with us. West Fraser is a growing company that believes strongly in promoting from within and prides ourself on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. We thank all candidates for their interest. Please apply through our online application process as resumes will not be accepted at the site. No phone inquiries, please. West Fraser believes inclusive, diverse teams build a more vibrant workforce, safer operations, and a stronger company overall. We strive to create workplaces and leadership teams that are reflective of the diverse communities we are a part of. We will not discriminate against any applicant for employment on the basis of race, gender, national origin, or any other protected legal characteristic. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
05/01/2026
Full time
In general, all Care and Maintenance Team Members are required to plan and perform all maintenance and repair operations necessary to keep plant property, equipment, machinery, and tools in good operating condition; diagnose problems and work in many varied and diversified capacities required in general care and maintenance, overhaul, and repair of plant equipment processes and facilities. Periodically perform or assist others in routine to moderately complex repairs to plant equipment and machinery. What you will do: Work involves a complete range and wide variety of duties involving diversified and difficult work using technical diagnostics, computer equipment, and a variety of precision instruments; requiring much care to effectively and efficiently diagnose, dismantle, repair, lubricate, reassemble or otherwise work on general maintenance. Diagnose causes of malfunctions by sight, sound, or actions of machinery and equipment. Start, observe, operate, or otherwise inactivate equipment to detect or verify correct functions. Inspect, adjust, clean, or lubricate equipment as preventive maintenance. Tear down, replace, repair, install, and assemble equipment, parts, components, and accessories. Operate various mechanical and electronic test equipment. Specific knowledge of pumps, conveyor systems, motors, and drives is required in the performance of regular or assigned duties. Work rotating shifts, holidays, weekends, and overtime as scheduled or required. Willing and able to maintain strict adherence to safety rules and regulations, including wearing safety equipment and completing all required training. Education and Experience you will need: Minimum High School or GED Three (3) years or more of experience installing, troubleshooting, and repairing manufacturing equipment Experience with fabrication, cutting with a torch, and welding with an arc welder Experience in a manufacturing environment Eligible to legally work in the United States Willing and able to work a 12-hour rotating schedule which will include nights, weekends, and holidays Willing and able to work on an emergency call-in basis as required Ability to work as part of a team and deliver value to the team Willingness and ability to cross-train to learn new jobs and skills Consistent, predictable attendance Our highly competitive compensation package and outstanding benefits include: Benefits starting Day 1 Competitive starting pay On-the-job training A culture that strongly believes in promoting from within Medical Dental 401k with company match Life Insurance Disability Insurance Paid vacations and holidays Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: West Fraser is a diversified North American wood products company producing southern yellow pine lumber and wood chips across the Southern US and Western Canada. We are the largest lumber producer in North America! Our employees operate in a culture that values safety first and rewards hard work. We recognize and support our team culture and focus on growing our team by promoting from within - many of our employees have built their careers with us. West Fraser is a growing company that believes strongly in promoting from within and prides ourself on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. We thank all candidates for their interest. Please apply through our online application process as resumes will not be accepted at the site. No phone inquiries, please. West Fraser believes inclusive, diverse teams build a more vibrant workforce, safer operations, and a stronger company overall. We strive to create workplaces and leadership teams that are reflective of the diverse communities we are a part of. We will not discriminate against any applicant for employment on the basis of race, gender, national origin, or any other protected legal characteristic. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
In general, all Care and Maintenance Team Members are required to plan and perform all maintenance and repair operations necessary to keep plant property, equipment, machinery, and tools in good operating condition; diagnose problems and work in many varied and diversified capacities required in general care and maintenance, overhaul, and repair of plant equipment processes and facilities. Periodically perform or assist others in routine to moderately complex repairs to plant equipment and machinery. What you will do: Work involves a complete range and wide variety of duties involving diversified and difficult work using technical diagnostics, computer equipment, and a variety of precision instruments; requiring much care to effectively and efficiently diagnose, dismantle, repair, lubricate, reassemble or otherwise work on general maintenance. Diagnose causes of malfunctions by sight, sound, or actions of machinery and equipment. Start, observe, operate, or otherwise inactivate equipment to detect or verify correct functions. Inspect, adjust, clean, or lubricate equipment as preventive maintenance. Tear down, replace, repair, install, and assemble equipment, parts, components, and accessories. Operate various mechanical and electronic test equipment. Specific knowledge of pumps, conveyor systems, motors, and drives is required in the performance of regular or assigned duties. Work rotating shifts, holidays, weekends, and overtime as scheduled or required. Willing and able to maintain strict adherence to safety rules and regulations, including wearing safety equipment and completing all required training. Education and Experience you will need: Minimum High School or GED Three (3) years or more of experience installing, troubleshooting, and repairing manufacturing equipment Experience with fabrication, cutting with a torch, and welding with an arc welder Experience in a manufacturing environment Eligible to legally work in the United States Willing and able to work a 12-hour rotating schedule which will include nights, weekends, and holidays Willing and able to work on an emergency call-in basis as required Ability to work as part of a team and deliver value to the team Willingness and ability to cross-train to learn new jobs and skills Consistent, predictable attendance Our highly competitive compensation package and outstanding benefits include: Benefits starting Day 1 Competitive starting pay On-the-job training A culture that strongly believes in promoting from within Medical Dental 401k with company match Life Insurance Disability Insurance Paid vacations and holidays Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: West Fraser is a diversified North American wood products company producing southern yellow pine lumber and wood chips across the Southern US and Western Canada. We are the largest lumber producer in North America! Our employees operate in a culture that values safety first and rewards hard work. We recognize and support our team culture and focus on growing our team by promoting from within - many of our employees have built their careers with us. West Fraser is a growing company that believes strongly in promoting from within and prides ourself on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. We thank all candidates for their interest. Please apply through our online application process as resumes will not be accepted at the site. No phone inquiries, please. West Fraser believes inclusive, diverse teams build a more vibrant workforce, safer operations, and a stronger company overall. We strive to create workplaces and leadership teams that are reflective of the diverse communities we are a part of. We will not discriminate against any applicant for employment on the basis of race, gender, national origin, or any other protected legal characteristic. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
05/01/2026
Full time
In general, all Care and Maintenance Team Members are required to plan and perform all maintenance and repair operations necessary to keep plant property, equipment, machinery, and tools in good operating condition; diagnose problems and work in many varied and diversified capacities required in general care and maintenance, overhaul, and repair of plant equipment processes and facilities. Periodically perform or assist others in routine to moderately complex repairs to plant equipment and machinery. What you will do: Work involves a complete range and wide variety of duties involving diversified and difficult work using technical diagnostics, computer equipment, and a variety of precision instruments; requiring much care to effectively and efficiently diagnose, dismantle, repair, lubricate, reassemble or otherwise work on general maintenance. Diagnose causes of malfunctions by sight, sound, or actions of machinery and equipment. Start, observe, operate, or otherwise inactivate equipment to detect or verify correct functions. Inspect, adjust, clean, or lubricate equipment as preventive maintenance. Tear down, replace, repair, install, and assemble equipment, parts, components, and accessories. Operate various mechanical and electronic test equipment. Specific knowledge of pumps, conveyor systems, motors, and drives is required in the performance of regular or assigned duties. Work rotating shifts, holidays, weekends, and overtime as scheduled or required. Willing and able to maintain strict adherence to safety rules and regulations, including wearing safety equipment and completing all required training. Education and Experience you will need: Minimum High School or GED Three (3) years or more of experience installing, troubleshooting, and repairing manufacturing equipment Experience with fabrication, cutting with a torch, and welding with an arc welder Experience in a manufacturing environment Eligible to legally work in the United States Willing and able to work a 12-hour rotating schedule which will include nights, weekends, and holidays Willing and able to work on an emergency call-in basis as required Ability to work as part of a team and deliver value to the team Willingness and ability to cross-train to learn new jobs and skills Consistent, predictable attendance Our highly competitive compensation package and outstanding benefits include: Benefits starting Day 1 Competitive starting pay On-the-job training A culture that strongly believes in promoting from within Medical Dental 401k with company match Life Insurance Disability Insurance Paid vacations and holidays Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: West Fraser is a diversified North American wood products company producing southern yellow pine lumber and wood chips across the Southern US and Western Canada. We are the largest lumber producer in North America! Our employees operate in a culture that values safety first and rewards hard work. We recognize and support our team culture and focus on growing our team by promoting from within - many of our employees have built their careers with us. West Fraser is a growing company that believes strongly in promoting from within and prides ourself on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. We thank all candidates for their interest. Please apply through our online application process as resumes will not be accepted at the site. No phone inquiries, please. West Fraser believes inclusive, diverse teams build a more vibrant workforce, safer operations, and a stronger company overall. We strive to create workplaces and leadership teams that are reflective of the diverse communities we are a part of. We will not discriminate against any applicant for employment on the basis of race, gender, national origin, or any other protected legal characteristic. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and Boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is "Faster, Safer, Better". JOB SUMMARY We are seeking a skilled Plasma Cutter Operator to join our shipyard team. The ideal candidate will be responsible for cutting and shaping metal components using plasma cutting equipment, based on blueprints, technical drawings, and job specifications. This role plays a critical part in the fabrication and repair of ships and marine structures. WORK SCHEDULE Regular attendance and punctuality are required of all employees. Day Shift, must be available for weekends and overtime. Galveston, Tx (1002 Texas Clipper Rd, Galveston, TX 77554) BENEFITS Competitive Salary. Comprehensive Benefits (medical, dental, vision, life). 401(k)/Retirement Savings. Friendly Work Environment. Paid-Time off/Holidays. Career Path Opportunities RESPONSIBILITIES Operate plasma cutting machines to cut, bevel, or contour metal plates, sheets, and structural components. Interpret and work from technical drawings, blueprints, or work orders to determine cutting requirements. Set up and calibrate plasma cutting equipment, ensuring proper gas pressures and torch alignment. Inspect and measure finished pieces to ensure they meet specified tolerances and quality standards. Perform routine maintenance on equipment and ensure safe operating conditions. Handle and move materials using cranes, forklifts, or manual lifting techniques. Adhere to safety protocols and PPE requirements in accordance with shipyard and OSHA standards. Work collaboratively with welders, fitters, and fabricators to meet project deadlines. Maintain a clean and organized work environment. EXPERIENCE & QUALIFICATIONS High school diploma or GED preferred. Minimum 1-2 years of experience operating plasma cutting equipment, preferably in a shipyard or industrial setting. Strong understanding of metal types, cutting techniques, and safety procedures. Ability to read and interpret technical drawings and blueprints. Proficient with measuring tools such as calipers, tape measures, and squares. PHYSICAL / MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, life vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD's), or other protective equipment as required by the work performed and location the work is being done. In addition, Employees in this position must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Standing, stooping, bending, crouching, kneeling, squatting, climbing, crawling, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Climbing stairs, and/or vertical ladders of varying heights. Working in confined work areas and/or elevated heights. Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Visually inspecting equipment and verifying information, often in small print. Applying sideways/upward/downward pressure to tighten and loosen hardware. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Southwest Shipyard, LP is on an "at-will" basis. There is no contract of employment between Southwest Shipyard, L.P., and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by Southwest Shipyard, L.P. Executive. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Southwest Shipyard, LP is an equal opportunity employer, and all qualified candidates will receive consideration without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Southwest Shipyard, LP participates in the E-Verify Employment Verification Program. Southwest Shipyard, LP is not currently accepting unsolicited resumes from search firms. Regardless of past practice, all resumes submitted by search firms to any employee at Southwest Shipyard, LP, via-email, the Internet or directly to hiring managers at Southwest Shipyard, LP in any form without a valid written agreement in place for that specific position will be deemed the sole property of Southwest Shipyard, LP. As a result, no fee will be paid in the event the candidate is hired by Southwest Shipyard, LP PI32ff3ab2a1ee-6591
05/01/2026
Full time
SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and Boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is "Faster, Safer, Better". JOB SUMMARY We are seeking a skilled Plasma Cutter Operator to join our shipyard team. The ideal candidate will be responsible for cutting and shaping metal components using plasma cutting equipment, based on blueprints, technical drawings, and job specifications. This role plays a critical part in the fabrication and repair of ships and marine structures. WORK SCHEDULE Regular attendance and punctuality are required of all employees. Day Shift, must be available for weekends and overtime. Galveston, Tx (1002 Texas Clipper Rd, Galveston, TX 77554) BENEFITS Competitive Salary. Comprehensive Benefits (medical, dental, vision, life). 401(k)/Retirement Savings. Friendly Work Environment. Paid-Time off/Holidays. Career Path Opportunities RESPONSIBILITIES Operate plasma cutting machines to cut, bevel, or contour metal plates, sheets, and structural components. Interpret and work from technical drawings, blueprints, or work orders to determine cutting requirements. Set up and calibrate plasma cutting equipment, ensuring proper gas pressures and torch alignment. Inspect and measure finished pieces to ensure they meet specified tolerances and quality standards. Perform routine maintenance on equipment and ensure safe operating conditions. Handle and move materials using cranes, forklifts, or manual lifting techniques. Adhere to safety protocols and PPE requirements in accordance with shipyard and OSHA standards. Work collaboratively with welders, fitters, and fabricators to meet project deadlines. Maintain a clean and organized work environment. EXPERIENCE & QUALIFICATIONS High school diploma or GED preferred. Minimum 1-2 years of experience operating plasma cutting equipment, preferably in a shipyard or industrial setting. Strong understanding of metal types, cutting techniques, and safety procedures. Ability to read and interpret technical drawings and blueprints. Proficient with measuring tools such as calipers, tape measures, and squares. PHYSICAL / MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, life vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD's), or other protective equipment as required by the work performed and location the work is being done. In addition, Employees in this position must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Standing, stooping, bending, crouching, kneeling, squatting, climbing, crawling, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Climbing stairs, and/or vertical ladders of varying heights. Working in confined work areas and/or elevated heights. Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Visually inspecting equipment and verifying information, often in small print. Applying sideways/upward/downward pressure to tighten and loosen hardware. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Southwest Shipyard, LP is on an "at-will" basis. There is no contract of employment between Southwest Shipyard, L.P., and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by Southwest Shipyard, L.P. Executive. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Southwest Shipyard, LP is an equal opportunity employer, and all qualified candidates will receive consideration without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Southwest Shipyard, LP participates in the E-Verify Employment Verification Program. Southwest Shipyard, LP is not currently accepting unsolicited resumes from search firms. Regardless of past practice, all resumes submitted by search firms to any employee at Southwest Shipyard, LP, via-email, the Internet or directly to hiring managers at Southwest Shipyard, LP in any form without a valid written agreement in place for that specific position will be deemed the sole property of Southwest Shipyard, LP. As a result, no fee will be paid in the event the candidate is hired by Southwest Shipyard, LP PI32ff3ab2a1ee-6591
We have several Inside Sales roles in the Oil and Gas Manufacturing industry. Most of the roles are related to the PVF Industry, more specifically the valve industry. We are also open to Job Shop Estimators who work with Machinist, Welders and Engineering to guide clients through Servicing of Industrial Equipment. Candidates with a stable record of inside sales is desired. We are very open to rate ranges and levels of experience. Please email me directly for a swift reply and title your email InsidePVF. My email is
05/01/2026
Full time
We have several Inside Sales roles in the Oil and Gas Manufacturing industry. Most of the roles are related to the PVF Industry, more specifically the valve industry. We are also open to Job Shop Estimators who work with Machinist, Welders and Engineering to guide clients through Servicing of Industrial Equipment. Candidates with a stable record of inside sales is desired. We are very open to rate ranges and levels of experience. Please email me directly for a swift reply and title your email InsidePVF. My email is
This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $65,000 - $100,000 per year A bit about us: Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company. We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing. Why join us? Accelerated Career Growth! Competitive Base Salary and Bonus! Job Details Job Details: We are seeking a dynamic and experienced Welding Engineer to join our team. This is a permanent position in the manufacturing industry where you will be tasked with the responsibility of designing, implementing, maintaining, and improving welding applications. You will also be responsible for ensuring the highest quality of welding work is achieved and that it meets all the relevant safety and technical standards. Responsibilities: Provide technical support to production staff and troubleshoot welding related issues. Design and implement new welding processes or improve existing ones to enhance efficiency and profitability. Conduct research and development activities to improve welding techniques, procedures, and applications. Perform welding procedure and welder performance qualifications in accordance with required codes and standards. Develop and implement welding standards and procedures to guide production and welding personnel in the manufacturing process. Work closely with design and engineering teams to ensure the manufacturability of new designs and improve production processes. Provide training and guidance to production staff on advanced welding techniques and technologies. Collaborate with quality control teams to establish quality standards and specifications, and to ensure these standards are met. Utilize CAD software to design and optimize welding fixtures and tooling. Implement Lean manufacturing principles to improve efficiency and reduce waste. Operate and program robotic and laser welding machines. Qualifications: Bachelor's degree in Welding Engineering, Mechanical Engineering, or a related field. A minimum of 2 years' experience in a similar role within the manufacturing industry. Strong knowledge of welding processes, procedures, and safety standards. Proficiency in CAD software. Experience with Lean manufacturing principles. Experience with robotic and laser welding. Ability to read and interpret blueprints and engineering plans. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills. Ability to work in a fast-paced, high-pressure environment. Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification would be an advantage. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
05/01/2026
Full time
This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $65,000 - $100,000 per year A bit about us: Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company. We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing. Why join us? Accelerated Career Growth! Competitive Base Salary and Bonus! Job Details Job Details: We are seeking a dynamic and experienced Welding Engineer to join our team. This is a permanent position in the manufacturing industry where you will be tasked with the responsibility of designing, implementing, maintaining, and improving welding applications. You will also be responsible for ensuring the highest quality of welding work is achieved and that it meets all the relevant safety and technical standards. Responsibilities: Provide technical support to production staff and troubleshoot welding related issues. Design and implement new welding processes or improve existing ones to enhance efficiency and profitability. Conduct research and development activities to improve welding techniques, procedures, and applications. Perform welding procedure and welder performance qualifications in accordance with required codes and standards. Develop and implement welding standards and procedures to guide production and welding personnel in the manufacturing process. Work closely with design and engineering teams to ensure the manufacturability of new designs and improve production processes. Provide training and guidance to production staff on advanced welding techniques and technologies. Collaborate with quality control teams to establish quality standards and specifications, and to ensure these standards are met. Utilize CAD software to design and optimize welding fixtures and tooling. Implement Lean manufacturing principles to improve efficiency and reduce waste. Operate and program robotic and laser welding machines. Qualifications: Bachelor's degree in Welding Engineering, Mechanical Engineering, or a related field. A minimum of 2 years' experience in a similar role within the manufacturing industry. Strong knowledge of welding processes, procedures, and safety standards. Proficiency in CAD software. Experience with Lean manufacturing principles. Experience with robotic and laser welding. Ability to read and interpret blueprints and engineering plans. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills. Ability to work in a fast-paced, high-pressure environment. Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification would be an advantage. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title : Centrifugal Assembler/Welder Location : Buffalo, NY Schedule : Monday - Friday 7:00AM - 3:30 PM Pay Range : Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us : Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at and join us to own your future. Job Overview : We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities : Perform assembly and testing of industrial machinery and compression equipment following standard work procedures. Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately. Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks. Inspect parts and finished products to detect quality defects and ensure compliance with safety standards. Load and unload equipment using fork trucks and hoists; support material handling and inventory activities. Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep. Maintain a safe, clean work environment in compliance with all safety rules and procedures. Collaborate with team members, support cross-functional tasks, and contribute to process improvement initiatives. Requirements : High School Diploma or General Equivalent Diploma (GED) is required. Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding. MIG & TIG welding. 3+ years experience welding to exact ASME specifications. Must know proper purging techniques for stainless steels. Must be able to lift up to 25 pounds from floor to waist. Occasionally required to lift up to 50 pounds. Core Competences : Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures. Able to rely on experience and judgment to plan and accomplish goals. Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices. Ability to identify routine problem causation, and correct routine problems, and willingness to learn. Broad working knowledge and experience with standard work instructions. Team oriented, must have the ability to work cohesively with others. Must possess ability to work well in a manufacturing environment. Must be detail-oriented and self-motivated. Must be able to work in a multi-tasked environment. Preferences : 3+ years in manufacturing experience preferred. Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred. Ability to complete X-ray quality work to ASME B31.3 Knowledgeable of and able to utilize computer systems. Frequently required to sit, stand, and walk for extended periods. Reaching and handling with high levels of dexterity. Occasionally required to work near moving mechanical equipment. Frequent exposure to various chemicals, sealants, and lubricants. Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. Normal exposure to moderate noise levels. Occasional exposure to high noise, levels where hearing protection will be required. Pay Range : Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . PandoLogic. Category:Manufacturing,
05/01/2026
Full time
Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title : Centrifugal Assembler/Welder Location : Buffalo, NY Schedule : Monday - Friday 7:00AM - 3:30 PM Pay Range : Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us : Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at and join us to own your future. Job Overview : We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities : Perform assembly and testing of industrial machinery and compression equipment following standard work procedures. Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately. Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks. Inspect parts and finished products to detect quality defects and ensure compliance with safety standards. Load and unload equipment using fork trucks and hoists; support material handling and inventory activities. Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep. Maintain a safe, clean work environment in compliance with all safety rules and procedures. Collaborate with team members, support cross-functional tasks, and contribute to process improvement initiatives. Requirements : High School Diploma or General Equivalent Diploma (GED) is required. Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding. MIG & TIG welding. 3+ years experience welding to exact ASME specifications. Must know proper purging techniques for stainless steels. Must be able to lift up to 25 pounds from floor to waist. Occasionally required to lift up to 50 pounds. Core Competences : Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures. Able to rely on experience and judgment to plan and accomplish goals. Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices. Ability to identify routine problem causation, and correct routine problems, and willingness to learn. Broad working knowledge and experience with standard work instructions. Team oriented, must have the ability to work cohesively with others. Must possess ability to work well in a manufacturing environment. Must be detail-oriented and self-motivated. Must be able to work in a multi-tasked environment. Preferences : 3+ years in manufacturing experience preferred. Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred. Ability to complete X-ray quality work to ASME B31.3 Knowledgeable of and able to utilize computer systems. Frequently required to sit, stand, and walk for extended periods. Reaching and handling with high levels of dexterity. Occasionally required to work near moving mechanical equipment. Frequent exposure to various chemicals, sealants, and lubricants. Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. Normal exposure to moderate noise levels. Occasional exposure to high noise, levels where hearing protection will be required. Pay Range : Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . PandoLogic. Category:Manufacturing,
This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $65,000 - $100,000 per year A bit about us: Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company. We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing. Why join us? Accelerated Career Growth! Competitive Base Salary and Bonus! Job Details Job Details: We are seeking a dynamic and experienced Welding Engineer to join our team. This is a permanent position in the manufacturing industry where you will be tasked with the responsibility of designing, implementing, maintaining, and improving welding applications. You will also be responsible for ensuring the highest quality of welding work is achieved and that it meets all the relevant safety and technical standards. Responsibilities: Provide technical support to production staff and troubleshoot welding related issues. Design and implement new welding processes or improve existing ones to enhance efficiency and profitability. Conduct research and development activities to improve welding techniques, procedures, and applications. Perform welding procedure and welder performance qualifications in accordance with required codes and standards. Develop and implement welding standards and procedures to guide production and welding personnel in the manufacturing process. Work closely with design and engineering teams to ensure the manufacturability of new designs and improve production processes. Provide training and guidance to production staff on advanced welding techniques and technologies. Collaborate with quality control teams to establish quality standards and specifications, and to ensure these standards are met. Utilize CAD software to design and optimize welding fixtures and tooling. Implement Lean manufacturing principles to improve efficiency and reduce waste. Operate and program robotic and laser welding machines. Qualifications: Bachelor's degree in Welding Engineering, Mechanical Engineering, or a related field. A minimum of 2 years' experience in a similar role within the manufacturing industry. Strong knowledge of welding processes, procedures, and safety standards. Proficiency in CAD software. Experience with Lean manufacturing principles. Experience with robotic and laser welding. Ability to read and interpret blueprints and engineering plans. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills. Ability to work in a fast-paced, high-pressure environment. Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification would be an advantage. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
05/01/2026
Full time
This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $65,000 - $100,000 per year A bit about us: Our client is a leading provider of clean energy products including smart battery systems, inverters, power converters, and building energy management solutions. They combine the pace and energy of a tech startup with the resources of a fast-growing Fortune 1000 company. We are seeking an experienced and adaptable Manufacturing Engineer to support our global product supply chain with engineering change management, technical drawing, 3D modeling, and communication with suppliers. The successful candidate will have experience with Solidworks, Product Lifecycle Management, sheet metal and plastics design for manufacturing, supplier quality evaluation, and contract manufacturing. Why join us? Accelerated Career Growth! Competitive Base Salary and Bonus! Job Details Job Details: We are seeking a dynamic and experienced Welding Engineer to join our team. This is a permanent position in the manufacturing industry where you will be tasked with the responsibility of designing, implementing, maintaining, and improving welding applications. You will also be responsible for ensuring the highest quality of welding work is achieved and that it meets all the relevant safety and technical standards. Responsibilities: Provide technical support to production staff and troubleshoot welding related issues. Design and implement new welding processes or improve existing ones to enhance efficiency and profitability. Conduct research and development activities to improve welding techniques, procedures, and applications. Perform welding procedure and welder performance qualifications in accordance with required codes and standards. Develop and implement welding standards and procedures to guide production and welding personnel in the manufacturing process. Work closely with design and engineering teams to ensure the manufacturability of new designs and improve production processes. Provide training and guidance to production staff on advanced welding techniques and technologies. Collaborate with quality control teams to establish quality standards and specifications, and to ensure these standards are met. Utilize CAD software to design and optimize welding fixtures and tooling. Implement Lean manufacturing principles to improve efficiency and reduce waste. Operate and program robotic and laser welding machines. Qualifications: Bachelor's degree in Welding Engineering, Mechanical Engineering, or a related field. A minimum of 2 years' experience in a similar role within the manufacturing industry. Strong knowledge of welding processes, procedures, and safety standards. Proficiency in CAD software. Experience with Lean manufacturing principles. Experience with robotic and laser welding. Ability to read and interpret blueprints and engineering plans. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills. Ability to work in a fast-paced, high-pressure environment. Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification would be an advantage. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Welder - Galesburg, IL Global Food Processing Equipment Manufacturer $22-30/hr + Full Benefits This Jobot Job is hosted by: Andrew Kraig Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $30 per hour A bit about us: Founded over seven decades ago, we are a global leader in designing and manufacturing industrial food processing and packaging equipment. We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently. Why join us? Competitive Compensation: Excellent hourly pay (DOE) 401(k) Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Paid Holidays, PTO, Sick Leave, and Birthday Off Stable Employer: No layoffs in decades, even during downturns Collaborative Shop Environment: Tight-knit team with mentorship opportunities Consistent Day Shift: 7:00am-3:30pm schedule Job Details Key Responsibilities and Duties: Perform TIG and MIG welding on large stainless steel industrial equipment Weld thin gauge stainless steel (primarily 16 GA) with attention to cosmetic and sanitary standards Read and interpret blueprints, drawings, and job orders to determine work requirements Assemble and fabricate stainless steel components for fryers, ovens, and conveyor systems Ensure welds meet structural and aesthetic standards required for USDA-inspected equipment Collaborate with fabrication and assembly teams to meet deadlines and maintain product quality Maintain tools, safety standards, and cleanliness in compliance with manufacturing policies You should have most of the following: High school diploma or equivalent (technical training preferred) Minimum 3 years of TIG and MIG welding experience (stainless steel preferred) Experience working with thin gauge metals (16 GA or similar) Ability to read and interpret mechanical blueprints and drawings Strong mechanical aptitude and attention to cosmetic weld quality Food or pharmaceutical industry background highly preferred Proven ability to meet deadlines and work collaboratively in a production environment Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
05/01/2026
Full time
Welder - Galesburg, IL Global Food Processing Equipment Manufacturer $22-30/hr + Full Benefits This Jobot Job is hosted by: Andrew Kraig Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $30 per hour A bit about us: Founded over seven decades ago, we are a global leader in designing and manufacturing industrial food processing and packaging equipment. We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently. Why join us? Competitive Compensation: Excellent hourly pay (DOE) 401(k) Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Paid Holidays, PTO, Sick Leave, and Birthday Off Stable Employer: No layoffs in decades, even during downturns Collaborative Shop Environment: Tight-knit team with mentorship opportunities Consistent Day Shift: 7:00am-3:30pm schedule Job Details Key Responsibilities and Duties: Perform TIG and MIG welding on large stainless steel industrial equipment Weld thin gauge stainless steel (primarily 16 GA) with attention to cosmetic and sanitary standards Read and interpret blueprints, drawings, and job orders to determine work requirements Assemble and fabricate stainless steel components for fryers, ovens, and conveyor systems Ensure welds meet structural and aesthetic standards required for USDA-inspected equipment Collaborate with fabrication and assembly teams to meet deadlines and maintain product quality Maintain tools, safety standards, and cleanliness in compliance with manufacturing policies You should have most of the following: High school diploma or equivalent (technical training preferred) Minimum 3 years of TIG and MIG welding experience (stainless steel preferred) Experience working with thin gauge metals (16 GA or similar) Ability to read and interpret mechanical blueprints and drawings Strong mechanical aptitude and attention to cosmetic weld quality Food or pharmaceutical industry background highly preferred Proven ability to meet deadlines and work collaboratively in a production environment Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and Boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is "Faster, Safer, Better". JOB SUMMARY This position is primarily responsible for fabricating, assembling, and installing metal structures and components in accordance with blueprints and specifications. Duties include cutting, fitting, and welding metal parts, inspecting for quality, and coordinating with welders and other trades to ensure the structural integrity of the project. PAY RANGE Pay is determined by Test Classification Results HR will contact qualified applicants to schedule on-site weld test. WORK SCHEDULE Regular attendance and punctuality are required of all employees. Varies by Department and/or Location. Day Shift: 6:00am - 3:30pm Night Shift: 3:30pm - 12:00am (Midnight) Overtime and/or Weekend Availability required. Brady Island. (8502 Cypress St, Houston Tx 77012) BENEFITS Competitive Salary. Comprehensive Benefits (medical, dental, vision, life). 401(k)/Retirement Savings. Friendly Work Environment. Paid-Time off/Holidays. Career Path Opportunities RESPONSIBILITIES Primary responsibilities are to perform structural fitting functions with following objectives: Perform structural fitter assignments as assigned. Work safe and maintain a safe working environment. Notify foreman or supervisor of any safety and/or structural issues as warranted. Lays out, positions, aligns and fits together fabricated structural steel plate according to customer specifications and direction from Foreman/Supervisor. Required to move parts into position, manually, by hoist or crane, and align parts, using jacks, etc. May be required to remove high spots and cut bevels, using hand files, portable grinders, and/or cutting torch, as well as give directions to the welder to build up low spots or short pieces. May, at times, be required to tack weld, as necessary. Consults with foreman or supervisor regarding installation or repair problems, sequence of operations, and time required to complete repair and/or installation Attend safety meetings as required Maintain a safe working environment EXPERIENCE & QUALIFICATIONS Must have or be eligible to obtain a TWIC card. Minimum one year experience as a structural fitter (shipyard experience preferred, but not required) Be able to perform simple paper work as required for filling out forms and logs. Must have good judgment skills and work initiative, taking good directions from Supervisor/Manager. Understanding of company Quality, Environmental & Safety manual and procedures described therein. High school graduate or equivalent. Must have good communication skills and leadership ability, English & Spanish (Bi-lingual required). PHYSICAL / MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, life vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD's), or other protective equipment as required by the work performed and location the work is being done. In addition, Employees in this position must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Standing, stooping, bending, crouching, kneeling, squatting, climbing, crawling, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Climbing stairs, and/or vertical ladders of varying heights. Working in confined work areas and/or elevated heights. Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Visually inspecting equipment and verifying information, often in small print. Applying sideways/upward/downward pressure to tighten and loosen hardware. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Southwest Shipyard, LP is on an "at-will" basis. There is no contract of employment between Southwest Shipyard, L.P., and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by Southwest Shipyard, L.P. Executive. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Southwest Shipyard, LP is an equal opportunity employer, and all qualified candidates will receive consideration without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Southwest Shipyard, LP participates in the E-Verify Employment Verification Program. Southwest Shipyard, LP is not currently accepting unsolicited resumes from search firms. Regardless of past practice, all resumes submitted by search firms to any employee at Southwest Shipyard, LP, via-email, the Internet or directly to hiring managers at Southwest Shipyard, LP in any form without a valid written agreement in place for that specific position will be deemed the sole property of Southwest Shipyard, LP. As a result, no fee will be paid in the event the candidate is hired by Southwest Shipyard, LP PI0cc30b5-
05/01/2026
Full time
SUMMARY OF COMPANY Southwest Shipyard, LP provides gas freeing and cleaning services, steaming, and flaring services, Barge and Boat repair, Surface preparation and painting, water treatment and new construction services to the commercial and government marine industry. Southwest Shipyard owns and operates four (4) shipyards in South Texas with direct deep-water access to the Gulf of Mexico. We take pride in our dedicated and experienced workforce that focuses on Quality, Safety and Environmental Excellence. Our motto is "Faster, Safer, Better". JOB SUMMARY This position is primarily responsible for fabricating, assembling, and installing metal structures and components in accordance with blueprints and specifications. Duties include cutting, fitting, and welding metal parts, inspecting for quality, and coordinating with welders and other trades to ensure the structural integrity of the project. PAY RANGE Pay is determined by Test Classification Results HR will contact qualified applicants to schedule on-site weld test. WORK SCHEDULE Regular attendance and punctuality are required of all employees. Varies by Department and/or Location. Day Shift: 6:00am - 3:30pm Night Shift: 3:30pm - 12:00am (Midnight) Overtime and/or Weekend Availability required. Brady Island. (8502 Cypress St, Houston Tx 77012) BENEFITS Competitive Salary. Comprehensive Benefits (medical, dental, vision, life). 401(k)/Retirement Savings. Friendly Work Environment. Paid-Time off/Holidays. Career Path Opportunities RESPONSIBILITIES Primary responsibilities are to perform structural fitting functions with following objectives: Perform structural fitter assignments as assigned. Work safe and maintain a safe working environment. Notify foreman or supervisor of any safety and/or structural issues as warranted. Lays out, positions, aligns and fits together fabricated structural steel plate according to customer specifications and direction from Foreman/Supervisor. Required to move parts into position, manually, by hoist or crane, and align parts, using jacks, etc. May be required to remove high spots and cut bevels, using hand files, portable grinders, and/or cutting torch, as well as give directions to the welder to build up low spots or short pieces. May, at times, be required to tack weld, as necessary. Consults with foreman or supervisor regarding installation or repair problems, sequence of operations, and time required to complete repair and/or installation Attend safety meetings as required Maintain a safe working environment EXPERIENCE & QUALIFICATIONS Must have or be eligible to obtain a TWIC card. Minimum one year experience as a structural fitter (shipyard experience preferred, but not required) Be able to perform simple paper work as required for filling out forms and logs. Must have good judgment skills and work initiative, taking good directions from Supervisor/Manager. Understanding of company Quality, Environmental & Safety manual and procedures described therein. High school graduate or equivalent. Must have good communication skills and leadership ability, English & Spanish (Bi-lingual required). PHYSICAL / MENTAL REQUIREMENTS The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, life vest, respirators, ear plugs, steel toed shoes, personal flotation devices (PFD's), or other protective equipment as required by the work performed and location the work is being done. In addition, Employees in this position must also be capable of: Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Standing, stooping, bending, crouching, kneeling, squatting, climbing, crawling, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work. Climbing stairs, and/or vertical ladders of varying heights. Working in confined work areas and/or elevated heights. Lifting objects of minimum of 10lbs, with maximum single-person lift limit of 50lbs, with frequent lifting and carrying. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Visually inspecting equipment and verifying information, often in small print. Applying sideways/upward/downward pressure to tighten and loosen hardware. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Employment at Southwest Shipyard, LP is on an "at-will" basis. There is no contract of employment between Southwest Shipyard, L.P., and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Only the Owner or President has the authority to modify the at-will relationship, and then only in writing specifically addressed to the employee on this issue and signed by Southwest Shipyard, L.P. Executive. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Southwest Shipyard, LP is an equal opportunity employer, and all qualified candidates will receive consideration without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or any other characteristic protected by law. Southwest Shipyard, LP participates in the E-Verify Employment Verification Program. Southwest Shipyard, LP is not currently accepting unsolicited resumes from search firms. Regardless of past practice, all resumes submitted by search firms to any employee at Southwest Shipyard, LP, via-email, the Internet or directly to hiring managers at Southwest Shipyard, LP in any form without a valid written agreement in place for that specific position will be deemed the sole property of Southwest Shipyard, LP. As a result, no fee will be paid in the event the candidate is hired by Southwest Shipyard, LP PI0cc30b5-
Full job description MUST HAVE RELEVANT WORK EXPERIENCE IN MANUFACTURING. DO NOT APPLY IF YOU HAVE NOT WORKED IN MANUFACTURING. Key Responsibilities Cleanroom Assembly & Support: Perform assembly, packaging, and inspection of UHP welded gas and fluid delivery components in an ISO-certified cleanroom. Assist in the cleaning, preparation, and handling of stainless steel parts and subassemblies for welding and post-weld processing. Use hand tools, fixtures, and cleaning solutions according to standard operating procedures (SOPs). Contamination Control: Follow cleanroom protocols strictly, including gowning, equipment handling, and cleanliness standards to ensure particulate and chemical contamination control. Conduct pre-cleaning and post-cleaning processes using DI water, solvents, ultrasonic baths, and other cleaning equipment. Documentation & Process Control: Complete production travelers, inspection logs, and equipment checklists with accuracy. Ensure all processes are performed to documented specifications and customer requirements. Quality & Inspection: Perform visual inspections of welds, surfaces, and fittings under magnification. Work alongside QA inspectors and welders to identify defects or process non-conformities. Safety & Compliance: Follow all safety procedures, cleanroom protocols, and chemical handling guidelines. Report unsafe conditions or quality issues to appropriate personnel. Team Collaboration: Work collaboratively with welders, engineers, and senior technicians to meet daily production goals. Qualifications Education: High School Diploma or GED required. Experience: 1-2 years of experience in a cleanroom, manufacturing, semiconductor, or welding environment. Previous experience with stainless steel, orbital welding, or UHP component handling is preferred but not required. Skills & Abilities: Strong attention to detail and ability to follow strict protocols. Basic mechanical aptitude and comfort with hand tools and precision equipment. Ability to wear cleanroom garments (gowning, gloves, booties) for extended periods. Willingness to work in environments requiring chemical handling and cleanliness standards. Physical Requirements: Ability to lift up to 40 lbs. Standing, bending, and repetitive hand motion for extended periods. Work in a temperature- and humidity-controlled cleanroom for full shifts. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Ability to Commute: Austin, TX 78758 (Preferred) Ability to Relocate: Austin, TX 78758: Relocate before starting work (Preferred) Work Location: In person Compensation details: 19-25 Hourly Wage PIf2b24-3226
05/01/2026
Full time
Full job description MUST HAVE RELEVANT WORK EXPERIENCE IN MANUFACTURING. DO NOT APPLY IF YOU HAVE NOT WORKED IN MANUFACTURING. Key Responsibilities Cleanroom Assembly & Support: Perform assembly, packaging, and inspection of UHP welded gas and fluid delivery components in an ISO-certified cleanroom. Assist in the cleaning, preparation, and handling of stainless steel parts and subassemblies for welding and post-weld processing. Use hand tools, fixtures, and cleaning solutions according to standard operating procedures (SOPs). Contamination Control: Follow cleanroom protocols strictly, including gowning, equipment handling, and cleanliness standards to ensure particulate and chemical contamination control. Conduct pre-cleaning and post-cleaning processes using DI water, solvents, ultrasonic baths, and other cleaning equipment. Documentation & Process Control: Complete production travelers, inspection logs, and equipment checklists with accuracy. Ensure all processes are performed to documented specifications and customer requirements. Quality & Inspection: Perform visual inspections of welds, surfaces, and fittings under magnification. Work alongside QA inspectors and welders to identify defects or process non-conformities. Safety & Compliance: Follow all safety procedures, cleanroom protocols, and chemical handling guidelines. Report unsafe conditions or quality issues to appropriate personnel. Team Collaboration: Work collaboratively with welders, engineers, and senior technicians to meet daily production goals. Qualifications Education: High School Diploma or GED required. Experience: 1-2 years of experience in a cleanroom, manufacturing, semiconductor, or welding environment. Previous experience with stainless steel, orbital welding, or UHP component handling is preferred but not required. Skills & Abilities: Strong attention to detail and ability to follow strict protocols. Basic mechanical aptitude and comfort with hand tools and precision equipment. Ability to wear cleanroom garments (gowning, gloves, booties) for extended periods. Willingness to work in environments requiring chemical handling and cleanliness standards. Physical Requirements: Ability to lift up to 40 lbs. Standing, bending, and repetitive hand motion for extended periods. Work in a temperature- and humidity-controlled cleanroom for full shifts. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Ability to Commute: Austin, TX 78758 (Preferred) Ability to Relocate: Austin, TX 78758: Relocate before starting work (Preferred) Work Location: In person Compensation details: 19-25 Hourly Wage PIf2b24-3226
Global Engineering Company with opportunity for growth This Jobot Job is hosted by: Garrett Mathison Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $90,000 per year A bit about us: We are a global engineering company that has seen tremendous growth and success in the past 20 years. We serve a number of industries ranging from space to water to racing and everything in between. Why join us? We offer great benefits where most of the premiums are paid for both the employee and their dependents, we also offer retirement plans and generous PTO. Job Details We are seeking a dynamic and experienced Manufacturing Floor Supervisor to join our Engineering team. This is a permanent, full-time position that offers a challenging and rewarding opportunity to contribute to our company's manufacturing operations. The successful candidate will oversee the daily operations on the manufacturing floor, ensuring efficiency, safety, and productivity. This role is integral to our success, and we are looking for someone who is passionate about engineering, with a strong background in directing Machinists, Programmers and Welders. Responsibilities: 1. Supervise and coordinate all activities on the manufacturing floor, ensuring all operations run smoothly and efficiently. 2. Utilize CAD software to read and interpret models and blueprints 3. Implement and enforce safety regulations and company policies, ensuring the well-being of all staff members. 4. Train, mentor, and guide team members, fostering a positive and collaborative work environment. 5. Work closely with the engineering team to develop and implement manufacturing plans and schedules. 6. Monitor production output and product quality, implementing corrective actions when necessary. 7. Collaborate with other departments such as Quality, Procurement, and Design to ensure alignment and efficiency. 8. Analyze and report on manufacturing data, providing insights and recommendations for improvement. 9. Maintain equipment, scheduling repairs and upgrades as necessary. 10. Stay current with the latest manufacturing technologies, processes, and best practices, implementing these as appropriate to improve operations. Qualifications: 1. Bachelor's degree in Engineering, Industrial Technology, or a related field. 2. Minimum of 5 years of experience in a supervisory role within a manufacturing environment, preferably in Aerospace. 3. Ability to read CAD drawings 4. Exceptional leadership and team management skills, with the ability to motivate and inspire others. 5. Strong understanding of manufacturing processes, equipment, and safety regulations. 6. Excellent problem-solving skills, with the ability to troubleshoot and resolve issues efficiently. 7. Ability to handle multiple tasks and prioritize effectively. 8. Excellent communication and interpersonal skills. 9. Strong analytical and decision-making abilities. 10. Commitment to continuous improvement and staying current with the latest industry trends and technologies. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
05/01/2026
Full time
Global Engineering Company with opportunity for growth This Jobot Job is hosted by: Garrett Mathison Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $90,000 per year A bit about us: We are a global engineering company that has seen tremendous growth and success in the past 20 years. We serve a number of industries ranging from space to water to racing and everything in between. Why join us? We offer great benefits where most of the premiums are paid for both the employee and their dependents, we also offer retirement plans and generous PTO. Job Details We are seeking a dynamic and experienced Manufacturing Floor Supervisor to join our Engineering team. This is a permanent, full-time position that offers a challenging and rewarding opportunity to contribute to our company's manufacturing operations. The successful candidate will oversee the daily operations on the manufacturing floor, ensuring efficiency, safety, and productivity. This role is integral to our success, and we are looking for someone who is passionate about engineering, with a strong background in directing Machinists, Programmers and Welders. Responsibilities: 1. Supervise and coordinate all activities on the manufacturing floor, ensuring all operations run smoothly and efficiently. 2. Utilize CAD software to read and interpret models and blueprints 3. Implement and enforce safety regulations and company policies, ensuring the well-being of all staff members. 4. Train, mentor, and guide team members, fostering a positive and collaborative work environment. 5. Work closely with the engineering team to develop and implement manufacturing plans and schedules. 6. Monitor production output and product quality, implementing corrective actions when necessary. 7. Collaborate with other departments such as Quality, Procurement, and Design to ensure alignment and efficiency. 8. Analyze and report on manufacturing data, providing insights and recommendations for improvement. 9. Maintain equipment, scheduling repairs and upgrades as necessary. 10. Stay current with the latest manufacturing technologies, processes, and best practices, implementing these as appropriate to improve operations. Qualifications: 1. Bachelor's degree in Engineering, Industrial Technology, or a related field. 2. Minimum of 5 years of experience in a supervisory role within a manufacturing environment, preferably in Aerospace. 3. Ability to read CAD drawings 4. Exceptional leadership and team management skills, with the ability to motivate and inspire others. 5. Strong understanding of manufacturing processes, equipment, and safety regulations. 6. Excellent problem-solving skills, with the ability to troubleshoot and resolve issues efficiently. 7. Ability to handle multiple tasks and prioritize effectively. 8. Excellent communication and interpersonal skills. 9. Strong analytical and decision-making abilities. 10. Commitment to continuous improvement and staying current with the latest industry trends and technologies. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Express Employment Professionals
Saint Louis, Missouri
Welder / Fitter Location: St. Louis, MO 63125 Employment Type: Full-Time Direct-Hire Opportunity Compensation: $25.00 - $30.00 per hour (based on experience) About the Opportunity Our client, a respected leader in industrial fabrication and construction , is seeking a skilled Welder/Fitter to join their growing team in St. Louis, Missouri . This is a direct-hire position offering long-term stability, a strong safety culture, and opportunities for advancement within a hands-on, team-oriented environment. The ideal candidate will have a proven background in welding and fabrication, with experience using multiple welding techniques and the ability to read and interpret blueprints and schematics. Work will take place in both shop and field environments, where precision, safety, and craftsmanship are key. Key Responsibilities Perform MIG, TIG, FCAW, and stick welding on various metals, including sheet metal and ductwork. Read and interpret blueprints, schematics, and ASME codes & standards to complete work accurately. Operate hand tools, power tools, and fabrication equipment , including press brake machines. Conduct pipe threading and component assembly as required. Safely operate cranes and forklifts for material handling. Inspect completed welds using calipers, micrometers, and other precision tools to ensure compliance with quality standards. Maintain a clean, organized, and safe work area at all times. Collaborate with team members to ensure projects are completed efficiently and on schedule. Qualifications & Skills Proven experience in construction or industrial fabrication environments. Proficiency in MIG, TIG, FCAW, and stick welding techniques. Strong mechanical aptitude and equipment troubleshooting skills. Familiarity with rigging practices and safe material handling. Competent in math, measurement, and blueprint interpretation . Plasma cutting and machining experience a plus. Ability to work independently and as part of a team in a fast-paced environment. Strong attention to detail and commitment to quality workmanship . Why Work Through Us This is a direct-hire opportunity with one of our long-standing clients in St. Louis. The company is known for its commitment to employee safety, professional growth, and craftsmanship excellence . You'll join a stable team where your skills and work ethic are recognized and rewarded. PandoLogic. Category:Construction & Trades,
04/30/2026
Full time
Welder / Fitter Location: St. Louis, MO 63125 Employment Type: Full-Time Direct-Hire Opportunity Compensation: $25.00 - $30.00 per hour (based on experience) About the Opportunity Our client, a respected leader in industrial fabrication and construction , is seeking a skilled Welder/Fitter to join their growing team in St. Louis, Missouri . This is a direct-hire position offering long-term stability, a strong safety culture, and opportunities for advancement within a hands-on, team-oriented environment. The ideal candidate will have a proven background in welding and fabrication, with experience using multiple welding techniques and the ability to read and interpret blueprints and schematics. Work will take place in both shop and field environments, where precision, safety, and craftsmanship are key. Key Responsibilities Perform MIG, TIG, FCAW, and stick welding on various metals, including sheet metal and ductwork. Read and interpret blueprints, schematics, and ASME codes & standards to complete work accurately. Operate hand tools, power tools, and fabrication equipment , including press brake machines. Conduct pipe threading and component assembly as required. Safely operate cranes and forklifts for material handling. Inspect completed welds using calipers, micrometers, and other precision tools to ensure compliance with quality standards. Maintain a clean, organized, and safe work area at all times. Collaborate with team members to ensure projects are completed efficiently and on schedule. Qualifications & Skills Proven experience in construction or industrial fabrication environments. Proficiency in MIG, TIG, FCAW, and stick welding techniques. Strong mechanical aptitude and equipment troubleshooting skills. Familiarity with rigging practices and safe material handling. Competent in math, measurement, and blueprint interpretation . Plasma cutting and machining experience a plus. Ability to work independently and as part of a team in a fast-paced environment. Strong attention to detail and commitment to quality workmanship . Why Work Through Us This is a direct-hire opportunity with one of our long-standing clients in St. Louis. The company is known for its commitment to employee safety, professional growth, and craftsmanship excellence . You'll join a stable team where your skills and work ethic are recognized and rewarded. PandoLogic. Category:Construction & Trades,
Overview: Welder Location: San Antonio, TX Department: Maintenance Position Type: Full-Time WHAT WE PROVIDE: This full-time role offers $24- $28/hour (based on experience) with great perks like Medical, Dental, Vision, 401k matching, and paid time off. Enjoy flexible scheduling, a minimum of 40 hours/week, plus extra pay: $1/hour after 5pm and $5/hour on weekends. Additional benefits include tool and boot reimbursements, FREE uniforms, weekly pay, park access for you and a guest, family season passes, discounts off food and merch, and more! Responsibilities: Get ready to build the thrills! Six Flags Fiesta Texas is looking for a dedicated and skilled Iron Worker/Welder to join our Facilities Maintenance team. This hands-on role plays a vital part in maintaining and constructing our world-class rides, attractions, and infrastructure. If you have a passion for precision, enjoy working outdoors, and are ready to help shape the park from the ground up, this is the job for you! Key Responsibilities: Perform structural and fabrication welding using SMAW (Stick), MIG, and TIG methods. Assemble, install, and repair steel structures including ride components, building framework, fencing, and signage. Read and interpret blueprints, welding symbols, and engineering drawings. Operate tools and equipment including cutting torches, grinders, plasma cutters, lifts, and hoists. Follow all safety protocols and ensure work is performed to Six Flags and industry standards. Assist with the inspection, repair, and reinforcement of roller coaster tracks, support beams, and ride enclosures. Work at various heights, in varying weather conditions, and on rotating shifts as needed. Perform emergency repairs on structural components to minimize ride downtime. Coordinate with Ride Maintenance teams to support mechanical or hydraulic installations that require welding or fabrication. Collaborate with the Maintenance, Engineering, and Construction teams on new and ongoing projects. Qualifications: High school diploma or equivalent required; vocational training or apprenticeship preferred. Minimum 1-2 years of structural welding or ironwork experience. Ability to work at heights exceeding 50 feet, and operate heavy equipment safely. Valid driver's license with a clean driving record. Ability to work in various weather conditions. Must be able to work flexible hours including weekends, holidays, and evenings. (overtime may be required) Valid SMAW 3G, 4G, and 6G welding certifications, or ability to pass within 90 days of hire. (Employment is probationary until all certifications are obtained.) Availability to rotation shifts, weekends, holidays, evenings, and overtime as needed. OTHER NOTES All other duties as assigned or necessary to support the park as a whole. Reports to the Ride Maintenance Supervisor.
04/30/2026
Full time
Overview: Welder Location: San Antonio, TX Department: Maintenance Position Type: Full-Time WHAT WE PROVIDE: This full-time role offers $24- $28/hour (based on experience) with great perks like Medical, Dental, Vision, 401k matching, and paid time off. Enjoy flexible scheduling, a minimum of 40 hours/week, plus extra pay: $1/hour after 5pm and $5/hour on weekends. Additional benefits include tool and boot reimbursements, FREE uniforms, weekly pay, park access for you and a guest, family season passes, discounts off food and merch, and more! Responsibilities: Get ready to build the thrills! Six Flags Fiesta Texas is looking for a dedicated and skilled Iron Worker/Welder to join our Facilities Maintenance team. This hands-on role plays a vital part in maintaining and constructing our world-class rides, attractions, and infrastructure. If you have a passion for precision, enjoy working outdoors, and are ready to help shape the park from the ground up, this is the job for you! Key Responsibilities: Perform structural and fabrication welding using SMAW (Stick), MIG, and TIG methods. Assemble, install, and repair steel structures including ride components, building framework, fencing, and signage. Read and interpret blueprints, welding symbols, and engineering drawings. Operate tools and equipment including cutting torches, grinders, plasma cutters, lifts, and hoists. Follow all safety protocols and ensure work is performed to Six Flags and industry standards. Assist with the inspection, repair, and reinforcement of roller coaster tracks, support beams, and ride enclosures. Work at various heights, in varying weather conditions, and on rotating shifts as needed. Perform emergency repairs on structural components to minimize ride downtime. Coordinate with Ride Maintenance teams to support mechanical or hydraulic installations that require welding or fabrication. Collaborate with the Maintenance, Engineering, and Construction teams on new and ongoing projects. Qualifications: High school diploma or equivalent required; vocational training or apprenticeship preferred. Minimum 1-2 years of structural welding or ironwork experience. Ability to work at heights exceeding 50 feet, and operate heavy equipment safely. Valid driver's license with a clean driving record. Ability to work in various weather conditions. Must be able to work flexible hours including weekends, holidays, and evenings. (overtime may be required) Valid SMAW 3G, 4G, and 6G welding certifications, or ability to pass within 90 days of hire. (Employment is probationary until all certifications are obtained.) Availability to rotation shifts, weekends, holidays, evenings, and overtime as needed. OTHER NOTES All other duties as assigned or necessary to support the park as a whole. Reports to the Ride Maintenance Supervisor.
This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $85,000 - $100,000 per year A bit about us: Trusted leader in designing, engineering, and supporting heavy-duty material handling and defense equipment. With decades of proven expertise, we provide mission-critical solutions that keep military, industrial, and commercial operations moving safely and efficiently. Our commitment to innovation, reliability, and customer support ensures that the toughest jobs get done-no matter the environment. Why join us? Become part of a team that builds equipment trusted in the most demanding environments. We value innovation, craftsmanship, and collaboration-empowering our people to solve complex challenges and make a real impact. With competitive pay, comprehensive benefits, and room to grow, we invest in our employees just as much as we invest in our products. If you're looking for a career where your work matters. Job Details Job Details: We are seeking a highly skilled and experienced Permanent Certified Weld Inspector to join our dynamic team in the Manufacturing industry. This role is integral to ensuring the quality and safety of our welding projects. The successful candidate will be responsible for inspecting and approving all welding work, identifying and rectifying potential issues, and ensuring compliance with all relevant regulations and standards. This position requires a keen eye for detail, strong technical knowledge, and a commitment to excellence. Responsibilities: 1. Perform regular quality inspections on all welding work, ensuring compliance with national and international standards. 2. Identify, report, and rectify any defects or non-compliance issues in the welding work. 3. Conduct root cause analysis to identify the source of any defects or failures and implement corrective actions to prevent recurrence. 4. Collaborate with the welding team and other departments to ensure the overall quality and safety of our products. 5. Maintain detailed records of inspections, findings, and corrective actions. 6. Stay updated with the latest developments in welding technology, techniques, and safety standards. 7. Train and mentor junior inspectors and welders, fostering a culture of continuous learning and improvement. 8. Participate in project planning and pre-construction meetings to provide insights on potential welding issues and solutions. Qualifications: 1. A minimum of 5 years of experience as a Certified Weld Inspector in the Manufacturing industry. 2. Certified Welding Inspector (CWI) certification from the American Welding Society (AWS) or equivalent. 3. Proven experience in quality assurance and root cause analysis. 4. In-depth knowledge of welding techniques, materials, and equipment. 5. Strong understanding of national and international welding standards and regulations. 6. Excellent problem-solving abilities and attention to detail. 7. Ability to communicate effectively with team members at all levels. 8. Proficiency in using inspection tools and software. 9. Physical stamina and the ability to work in various conditions and environments. 10. A commitment to safety, quality, and continuous improvement. Join our team and play a crucial role in maintaining the high standards of quality and safety that our clients have come to expect from us. This is a fantastic opportunity for a seasoned Certified Weld Inspector to make a significant impact in a leading manufacturing company. If you have the necessary skills, experience, and dedication to excellence, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
04/30/2026
Full time
This Jobot Job is hosted by: Amanda Preston Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $85,000 - $100,000 per year A bit about us: Trusted leader in designing, engineering, and supporting heavy-duty material handling and defense equipment. With decades of proven expertise, we provide mission-critical solutions that keep military, industrial, and commercial operations moving safely and efficiently. Our commitment to innovation, reliability, and customer support ensures that the toughest jobs get done-no matter the environment. Why join us? Become part of a team that builds equipment trusted in the most demanding environments. We value innovation, craftsmanship, and collaboration-empowering our people to solve complex challenges and make a real impact. With competitive pay, comprehensive benefits, and room to grow, we invest in our employees just as much as we invest in our products. If you're looking for a career where your work matters. Job Details Job Details: We are seeking a highly skilled and experienced Permanent Certified Weld Inspector to join our dynamic team in the Manufacturing industry. This role is integral to ensuring the quality and safety of our welding projects. The successful candidate will be responsible for inspecting and approving all welding work, identifying and rectifying potential issues, and ensuring compliance with all relevant regulations and standards. This position requires a keen eye for detail, strong technical knowledge, and a commitment to excellence. Responsibilities: 1. Perform regular quality inspections on all welding work, ensuring compliance with national and international standards. 2. Identify, report, and rectify any defects or non-compliance issues in the welding work. 3. Conduct root cause analysis to identify the source of any defects or failures and implement corrective actions to prevent recurrence. 4. Collaborate with the welding team and other departments to ensure the overall quality and safety of our products. 5. Maintain detailed records of inspections, findings, and corrective actions. 6. Stay updated with the latest developments in welding technology, techniques, and safety standards. 7. Train and mentor junior inspectors and welders, fostering a culture of continuous learning and improvement. 8. Participate in project planning and pre-construction meetings to provide insights on potential welding issues and solutions. Qualifications: 1. A minimum of 5 years of experience as a Certified Weld Inspector in the Manufacturing industry. 2. Certified Welding Inspector (CWI) certification from the American Welding Society (AWS) or equivalent. 3. Proven experience in quality assurance and root cause analysis. 4. In-depth knowledge of welding techniques, materials, and equipment. 5. Strong understanding of national and international welding standards and regulations. 6. Excellent problem-solving abilities and attention to detail. 7. Ability to communicate effectively with team members at all levels. 8. Proficiency in using inspection tools and software. 9. Physical stamina and the ability to work in various conditions and environments. 10. A commitment to safety, quality, and continuous improvement. Join our team and play a crucial role in maintaining the high standards of quality and safety that our clients have come to expect from us. This is a fantastic opportunity for a seasoned Certified Weld Inspector to make a significant impact in a leading manufacturing company. If you have the necessary skills, experience, and dedication to excellence, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Welder - Pembroke, NH Global Food Processing Equipment Manufacturer $22-32/hr + Full Benefits This Jobot Job is hosted by: Andrew Kraig Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $30 per hour A bit about us: Founded over seven decades ago and based in Pembroke, NH, with other offices and facilities worldwide, we are a global leader in designing and manufacturing industrial food processing and packaging equipment. We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently. Why join us? Competitive Compensation: Excellent hourly pay (DOE) 401(k) Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Paid Holidays, PTO, Sick Leave, and Birthday Off Stable Employer: No layoffs in decades, even during downturns Collaborative Shop Environment: Tight-knit team with mentorship opportunities Consistent Day Shift: 7:00am-3:30pm schedule Job Details Key Responsibilities and Duties: Perform TIG and MIG welding on large stainless steel industrial equipment Weld thin gauge stainless steel (primarily 16 GA) with attention to cosmetic and sanitary standards Read and interpret blueprints, drawings, and job orders to determine work requirements Assemble and fabricate stainless steel components for fryers, ovens, and conveyor systems Ensure welds meet structural and aesthetic standards required for USDA-inspected equipment Collaborate with fabrication and assembly teams to meet deadlines and maintain product quality Maintain tools, safety standards, and cleanliness in compliance with manufacturing policies You should have most of the following: High school diploma or equivalent (technical training preferred) Minimum 3 years of TIG and MIG welding experience (stainless steel preferred) Experience working with thin gauge metals (16 GA or similar) Ability to read and interpret mechanical blueprints and drawings Strong mechanical aptitude and attention to cosmetic weld quality Food or pharmaceutical industry background highly preferred Proven ability to meet deadlines and work collaboratively in a production environment Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
04/30/2026
Full time
Welder - Pembroke, NH Global Food Processing Equipment Manufacturer $22-32/hr + Full Benefits This Jobot Job is hosted by: Andrew Kraig Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $30 per hour A bit about us: Founded over seven decades ago and based in Pembroke, NH, with other offices and facilities worldwide, we are a global leader in designing and manufacturing industrial food processing and packaging equipment. We build customized production lines (from frying and baking systems to conveyors and inspection technology) that help major food brands produce safe, consistent, and high-quality products efficiently. Why join us? Competitive Compensation: Excellent hourly pay (DOE) 401(k) Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Paid Holidays, PTO, Sick Leave, and Birthday Off Stable Employer: No layoffs in decades, even during downturns Collaborative Shop Environment: Tight-knit team with mentorship opportunities Consistent Day Shift: 7:00am-3:30pm schedule Job Details Key Responsibilities and Duties: Perform TIG and MIG welding on large stainless steel industrial equipment Weld thin gauge stainless steel (primarily 16 GA) with attention to cosmetic and sanitary standards Read and interpret blueprints, drawings, and job orders to determine work requirements Assemble and fabricate stainless steel components for fryers, ovens, and conveyor systems Ensure welds meet structural and aesthetic standards required for USDA-inspected equipment Collaborate with fabrication and assembly teams to meet deadlines and maintain product quality Maintain tools, safety standards, and cleanliness in compliance with manufacturing policies You should have most of the following: High school diploma or equivalent (technical training preferred) Minimum 3 years of TIG and MIG welding experience (stainless steel preferred) Experience working with thin gauge metals (16 GA or similar) Ability to read and interpret mechanical blueprints and drawings Strong mechanical aptitude and attention to cosmetic weld quality Food or pharmaceutical industry background highly preferred Proven ability to meet deadlines and work collaboratively in a production environment Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
Building Critical Infrastructure in the US Expertise in Steel Fabrication Excellent Benefits + Relocation Assistance + Strong Work Culture + More! This Jobot Job is hosted by: Caitlyn Hardy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $115,000 per year A bit about us: We are a heavy steel and fabrication company that's been in business for over 100 years. Our steel is used to build critical infrastructure in the US. We use high-tech CNC equipment to fabricate tons of structural steel every year. Our Eau Claire location is seeking a CWI-certified Quality Control Manager to lead and oversee all quality-related activities in structural steel fabrication, ensuring work meets established standards, specifications, and regulatory requirements while driving continuous improvement in collaboration with the company-wide QC team. Why join us? Competitive Base Salary! Excellent Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Job Details Job Responsibilities: Lead and manage the overall quality program at the plant, ensuring all fabricated steel meets customer specs, AISC standards, and delivery schedules. Collaborate with production and project management teams to enforce quality procedures, maintain documentation, and support project execution. Supervise and develop QC Inspectors; provide training, conduct performance reviews, and handle disciplinary actions when needed. Oversee AISC compliance, welder certifications, welding procedures, and prepare the shop for successful audits and inspections. Coordinate with DOT inspectors and customer engineers to schedule inspections, address concerns, and ensure timely completion of required documentation. Manage internal and outsourced testing programs, including NDT and magnetic particle testing; maintain inspection logs and tool calibration. Serve as part of the Plant Leadership Team, contributing to operational planning and maintaining the company's Quality Control Manual. Educational Requirements Certified Welding Inspector (CWI) certification required Minimum 5 years' experience leading a quality control function with welding in a heavy manufacturing environment NACE or SSPC Level I paint certification, or ability to obtain certification within six (6) months of hire Bridge experience preferred UT/MT/VT level II certifications, preferred Bachelor's degree in Quality Management, Engineering, Construction Management, Project Management or related field preferred Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
04/30/2026
Full time
Building Critical Infrastructure in the US Expertise in Steel Fabrication Excellent Benefits + Relocation Assistance + Strong Work Culture + More! This Jobot Job is hosted by: Caitlyn Hardy Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $115,000 per year A bit about us: We are a heavy steel and fabrication company that's been in business for over 100 years. Our steel is used to build critical infrastructure in the US. We use high-tech CNC equipment to fabricate tons of structural steel every year. Our Eau Claire location is seeking a CWI-certified Quality Control Manager to lead and oversee all quality-related activities in structural steel fabrication, ensuring work meets established standards, specifications, and regulatory requirements while driving continuous improvement in collaboration with the company-wide QC team. Why join us? Competitive Base Salary! Excellent Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Job Details Job Responsibilities: Lead and manage the overall quality program at the plant, ensuring all fabricated steel meets customer specs, AISC standards, and delivery schedules. Collaborate with production and project management teams to enforce quality procedures, maintain documentation, and support project execution. Supervise and develop QC Inspectors; provide training, conduct performance reviews, and handle disciplinary actions when needed. Oversee AISC compliance, welder certifications, welding procedures, and prepare the shop for successful audits and inspections. Coordinate with DOT inspectors and customer engineers to schedule inspections, address concerns, and ensure timely completion of required documentation. Manage internal and outsourced testing programs, including NDT and magnetic particle testing; maintain inspection logs and tool calibration. Serve as part of the Plant Leadership Team, contributing to operational planning and maintaining the company's Quality Control Manual. Educational Requirements Certified Welding Inspector (CWI) certification required Minimum 5 years' experience leading a quality control function with welding in a heavy manufacturing environment NACE or SSPC Level I paint certification, or ability to obtain certification within six (6) months of hire Bridge experience preferred UT/MT/VT level II certifications, preferred Bachelor's degree in Quality Management, Engineering, Construction Management, Project Management or related field preferred Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
1st shift, $20-$28/hr, MIG Welder Fabricator - NOT PRODUCTION WELDING This Jobot Job is hosted by: Kimberly Bartlein-Kraus Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $20 - $28 per hour A bit about us: This position entails MIG Welding for custom mixing equipment. Large welds. You MUST be comfortable with blueprint reading and fabricating parts. This is not a production welding position. Why join us? 1st shift: 7am-4pm Monday-Friday Pay Range: $20-$28/hr depending on experience Benefits: Health, dental, vision, life insurance - 401k, PTO, paid holidays and more Every day is a challenge. This is NOT a production welding position. Troubleshooting and Problem solving. Job Details This position focuses on custom MIG welding and fabrication for industrial mixing equipment. You'll be working on large welds and non-repetitive builds, not an assembly-line or production environment. Each project is different, requiring a strong ability to read blueprints, interpret drawings, and fabricate components accurately from specifications. This role is ideal for a welder who enjoys variety, challenge, and technical problem-solving. You'll regularly be asked to troubleshoot fit-up issues, adjust welding approaches, and collaborate with the fabrication team to ensure high-quality, structurally sound builds. Attention to detail, pride in workmanship, and the ability to think through fabrication challenges are critical for success. Custom, non-production welding environment MIG welding on large, heavy components Blueprint reading and part fabrication required Frequent troubleshooting and problem-solving Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
04/30/2026
Full time
1st shift, $20-$28/hr, MIG Welder Fabricator - NOT PRODUCTION WELDING This Jobot Job is hosted by: Kimberly Bartlein-Kraus Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $20 - $28 per hour A bit about us: This position entails MIG Welding for custom mixing equipment. Large welds. You MUST be comfortable with blueprint reading and fabricating parts. This is not a production welding position. Why join us? 1st shift: 7am-4pm Monday-Friday Pay Range: $20-$28/hr depending on experience Benefits: Health, dental, vision, life insurance - 401k, PTO, paid holidays and more Every day is a challenge. This is NOT a production welding position. Troubleshooting and Problem solving. Job Details This position focuses on custom MIG welding and fabrication for industrial mixing equipment. You'll be working on large welds and non-repetitive builds, not an assembly-line or production environment. Each project is different, requiring a strong ability to read blueprints, interpret drawings, and fabricate components accurately from specifications. This role is ideal for a welder who enjoys variety, challenge, and technical problem-solving. You'll regularly be asked to troubleshoot fit-up issues, adjust welding approaches, and collaborate with the fabrication team to ensure high-quality, structurally sound builds. Attention to detail, pride in workmanship, and the ability to think through fabrication challenges are critical for success. Custom, non-production welding environment MIG welding on large, heavy components Blueprint reading and part fabrication required Frequent troubleshooting and problem-solving Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
How You Will Make an Impact The Manufacturing Engineer (Welding) is responsible for developing, maintaining, and auditing weld procedures and processes used at Reading Truck Group. The Weld Engineer is responsible for advancing the welding process at Reading Truck Group by developing, specifying, evaluating, implementing and expanding the use of new welding technologies. The Nuts and Bolts Define, specify and maintain the welding and joining procedures and processes to optimize manufacturing process safety, quality and efficiency Advance the welding processes and Readings' manufacturing competitiveness through the implementation of robotics and automation for welding and joining initiatives at Reading Truck Group locations Project manage welding and joining projects Design and analyze labor and space requirements, product design, quality requirements, workflow, layout of equipment and workspace to maximize efficiency, consistency and effectiveness of welding operations and projects Collaborate with design and manufacturing teams to design processes that produce product within product and process specifications Review and analyze product sketches, designs, models, and drawings to make recommendations to improve in weld-ability and manufacturability Promote company safety policies and develop technical solutions to improve operational safety Work with maintenance team, and outside contractors to implement new equipment and processes, improve performance, and minimize equipment downtime Actively support in the daily activities of production teams Provide design support for welding and joining projects Support and participate in lean initiatives, and develop the welding and joining processes to provide customers with products that meet or exceed customer requirements and drive continuous safety, quality and productivity improvements Assist in response to infant warranty claims and quality issues with root cause analysis and corrective actions Monitor and optimize the use of consumables in the welding, joining and grinding operations Champion a welding steering committee; Oversee and present periodic audits for welding process equipment Oversee the certification of welders to American Welding Society (AWS) D1.1 throughout the organization Keep the leadership regular updated of the key metrics and progress of each project Responsible for estimating and executing projects within budget and on-time Perform other duties as required or directed by the management Skills and Abilities: Excellent working knowledge of assembly and welding procedures and processes Skilled is SolidWorks or 3D modeling software is preferred Proficient in Microsoft Office programs is required Excellent organizational skills Proficient Project Management skills Ability to engage peers, direct reports, and other associates to solve problems and develop improved methods, resolve issues or constraints Effective oral and written communication; excellent interpersonal skills Ability to collaborate with multiple departments Ability to work in a multi-disciplinary team Ability to oversee, guide, and train engineering technicians, maintenance personnel, and operations personnel in the areas of welding and welding technologies Position Qualifications & Requirements: Education: Bachelor's Degree in Welding, Materials Science, Metallurgical, Mechanical or Manufacturing Engineering Experience : Two (2)+ years of welding experience Five years of experience in truck body or other similar sheet metal welding industry preferred Experience with welding robotics is required Experience with Lean Manufacturing is preferred Experienced in supporting and/or implementing welding automation Familiar with DFM, DFMEA, PFMEA and their applications Certification/License: AWS CWI required, or similar How We Make an Impact At Reading Truck, we have more than 65 years of industry leadership in the manufacture, distribution, and enhancement of work truck bodies. We continue to experience rapid growth through our expanding network of more than 20 locations across North America. Take the next step in your career and come get paid to play with trucks! Some of Our Total Rewards We offer big company perks with small company culture: Comprehensive benefits package including Medical, Dental, Vision and Life 401(k) Savings Plan with Company Match Paid Parental Leave Tool Purchase Program Tuition Reimbursement Paid Time Off and 10 Observed (Paid) Holidays Generous Footwear, Eyewear, and Safety Equipment Discount Program Paid Training and Development Programs J.B. Poindexter & Co., Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. AGENCIES / THIRD PARTY RECRUITING FIRMS: Any unsolicited submissions received from third party agencies will be considered property of Reading Truck, and we will not be held liable for any fees related to those submissions. To learn more about Careers with Reading Truck visit our careers page PandoLogic. Category:Engineering,
04/30/2026
Full time
How You Will Make an Impact The Manufacturing Engineer (Welding) is responsible for developing, maintaining, and auditing weld procedures and processes used at Reading Truck Group. The Weld Engineer is responsible for advancing the welding process at Reading Truck Group by developing, specifying, evaluating, implementing and expanding the use of new welding technologies. The Nuts and Bolts Define, specify and maintain the welding and joining procedures and processes to optimize manufacturing process safety, quality and efficiency Advance the welding processes and Readings' manufacturing competitiveness through the implementation of robotics and automation for welding and joining initiatives at Reading Truck Group locations Project manage welding and joining projects Design and analyze labor and space requirements, product design, quality requirements, workflow, layout of equipment and workspace to maximize efficiency, consistency and effectiveness of welding operations and projects Collaborate with design and manufacturing teams to design processes that produce product within product and process specifications Review and analyze product sketches, designs, models, and drawings to make recommendations to improve in weld-ability and manufacturability Promote company safety policies and develop technical solutions to improve operational safety Work with maintenance team, and outside contractors to implement new equipment and processes, improve performance, and minimize equipment downtime Actively support in the daily activities of production teams Provide design support for welding and joining projects Support and participate in lean initiatives, and develop the welding and joining processes to provide customers with products that meet or exceed customer requirements and drive continuous safety, quality and productivity improvements Assist in response to infant warranty claims and quality issues with root cause analysis and corrective actions Monitor and optimize the use of consumables in the welding, joining and grinding operations Champion a welding steering committee; Oversee and present periodic audits for welding process equipment Oversee the certification of welders to American Welding Society (AWS) D1.1 throughout the organization Keep the leadership regular updated of the key metrics and progress of each project Responsible for estimating and executing projects within budget and on-time Perform other duties as required or directed by the management Skills and Abilities: Excellent working knowledge of assembly and welding procedures and processes Skilled is SolidWorks or 3D modeling software is preferred Proficient in Microsoft Office programs is required Excellent organizational skills Proficient Project Management skills Ability to engage peers, direct reports, and other associates to solve problems and develop improved methods, resolve issues or constraints Effective oral and written communication; excellent interpersonal skills Ability to collaborate with multiple departments Ability to work in a multi-disciplinary team Ability to oversee, guide, and train engineering technicians, maintenance personnel, and operations personnel in the areas of welding and welding technologies Position Qualifications & Requirements: Education: Bachelor's Degree in Welding, Materials Science, Metallurgical, Mechanical or Manufacturing Engineering Experience : Two (2)+ years of welding experience Five years of experience in truck body or other similar sheet metal welding industry preferred Experience with welding robotics is required Experience with Lean Manufacturing is preferred Experienced in supporting and/or implementing welding automation Familiar with DFM, DFMEA, PFMEA and their applications Certification/License: AWS CWI required, or similar How We Make an Impact At Reading Truck, we have more than 65 years of industry leadership in the manufacture, distribution, and enhancement of work truck bodies. We continue to experience rapid growth through our expanding network of more than 20 locations across North America. Take the next step in your career and come get paid to play with trucks! Some of Our Total Rewards We offer big company perks with small company culture: Comprehensive benefits package including Medical, Dental, Vision and Life 401(k) Savings Plan with Company Match Paid Parental Leave Tool Purchase Program Tuition Reimbursement Paid Time Off and 10 Observed (Paid) Holidays Generous Footwear, Eyewear, and Safety Equipment Discount Program Paid Training and Development Programs J.B. Poindexter & Co., Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. AGENCIES / THIRD PARTY RECRUITING FIRMS: Any unsolicited submissions received from third party agencies will be considered property of Reading Truck, and we will not be held liable for any fees related to those submissions. To learn more about Careers with Reading Truck visit our careers page PandoLogic. Category:Engineering,
Welder Role with Industry Leader / $22-$30 an hour depending on Experience / Great Benefits and Room for Growth This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $30 per hour A bit about us: We are a precision machine shop that specializes in Metal Manufacturing. We truly value our employees and our customers. We are looking for a skilled Welder to join our growing team. Why join us? $22-$30 an hour depending on Experience First Shift Great Benefits Room for Growth Job Details Read/Interpret Blueprints Layout Job MIG and TIG Welding Welding of Aluminum and Steel Utilize shop tools for Fabrication Inspections of Welds Weld in all positions Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
04/30/2026
Full time
Welder Role with Industry Leader / $22-$30 an hour depending on Experience / Great Benefits and Room for Growth This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $30 per hour A bit about us: We are a precision machine shop that specializes in Metal Manufacturing. We truly value our employees and our customers. We are looking for a skilled Welder to join our growing team. Why join us? $22-$30 an hour depending on Experience First Shift Great Benefits Room for Growth Job Details Read/Interpret Blueprints Layout Job MIG and TIG Welding Welding of Aluminum and Steel Utilize shop tools for Fabrication Inspections of Welds Weld in all positions Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here:
