The Manual Machinist is essential to our repair and remanufacturing operations, producing and restoring high-precision components for electric motors, pumps, gearboxes, generators, and rotating equipment that power critical, heavy industry applications. Key Responsibilities: Machining & Fabrication Set up parts in a 4-jaw chuck Machine shafts on a manual lathe while holding tolerances of .0005" (half a thousandth) on multiple fits Cut keyways in the center of a shaft using a manual vertical mill Operate horizontal mills and manually bore large holes Set up parts in a horizontal mill using V-blocks and angle plates Perform threading operations on a manual lathe Adjust manual lathe settings to eliminate taper cuts and chatter Use a steady rest on a lathe Drill and tap bolt holes accurately Apply proper feeds and speeds in manual milling and turning operations Manufacture or repair parts and machine components from blueprints Maintain a safe and organized work environment in accordance with company policies Compensation & Benefits Competitive pay (based on experience) 401(k) with company matching Health benefits including Vision and Dental Life Insurance Paid Time Off Qualifications: Skills & Competencies Strong written and verbal communication skills Ability to work independently and as part of a team Analytical and problem-solving capabilities Strong understanding of manual machining practices Ability to read and interpret blueprints and technical drawings Proficiency with precision measuring instruments High attention to detail and accuracy Ability to operate a forklift (or willingness to be trained) Commitment to company policies, procedures, and safety standards Education & Experience High school diploma or GED required Technical or vocational training preferred Minimum of two (2) years of experience with manual lathes, mills, boring mills, and other manufacturing tools preferred Proficiency with precision measuring instruments required Equal Opportunity Employer We are an EOE employer and encourage applications from minorities, females, veterans, and individuals with disabilities. This job description is intended to describe the general nature and level of work performed. It is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position.
03/27/2026
Full time
The Manual Machinist is essential to our repair and remanufacturing operations, producing and restoring high-precision components for electric motors, pumps, gearboxes, generators, and rotating equipment that power critical, heavy industry applications. Key Responsibilities: Machining & Fabrication Set up parts in a 4-jaw chuck Machine shafts on a manual lathe while holding tolerances of .0005" (half a thousandth) on multiple fits Cut keyways in the center of a shaft using a manual vertical mill Operate horizontal mills and manually bore large holes Set up parts in a horizontal mill using V-blocks and angle plates Perform threading operations on a manual lathe Adjust manual lathe settings to eliminate taper cuts and chatter Use a steady rest on a lathe Drill and tap bolt holes accurately Apply proper feeds and speeds in manual milling and turning operations Manufacture or repair parts and machine components from blueprints Maintain a safe and organized work environment in accordance with company policies Compensation & Benefits Competitive pay (based on experience) 401(k) with company matching Health benefits including Vision and Dental Life Insurance Paid Time Off Qualifications: Skills & Competencies Strong written and verbal communication skills Ability to work independently and as part of a team Analytical and problem-solving capabilities Strong understanding of manual machining practices Ability to read and interpret blueprints and technical drawings Proficiency with precision measuring instruments High attention to detail and accuracy Ability to operate a forklift (or willingness to be trained) Commitment to company policies, procedures, and safety standards Education & Experience High school diploma or GED required Technical or vocational training preferred Minimum of two (2) years of experience with manual lathes, mills, boring mills, and other manufacturing tools preferred Proficiency with precision measuring instruments required Equal Opportunity Employer We are an EOE employer and encourage applications from minorities, females, veterans, and individuals with disabilities. This job description is intended to describe the general nature and level of work performed. It is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position.
Do you have a keen eye for detail and drive to create high-quality products? EMT International, a leading provider of digital finishing solutions, is seeking a skilled CNC Machinist with a strong understanding of programming, machine setup, and tooling. In this position, you will play a crucial role in the manufacturing process by operating CNC machines efficiently to produce parts and components according to engineering specifications and blueprints. CNC Machinist Responsibilities: Setup: Load and adjust cutting tools, as well as select appropriate tooling, fixtures, and materials. Machine Operation: Operate manual or CNC machines to produce tooling, core holding and web finishing parts for machines in a most efficient way possible while maintaining quality. Programming: Develop CNC programs using G & M code and Fanuc control and perform program edits as required. Quality Assurance: Inspects and measures completed parts using precision measuring instruments to identify any defects and ensure parts meet specified tolerances and quality standards. Documentation: Maintain accurate records of production activities, including job setups, tool changes, and inspection results. Maintenance: Perform routine maintenance on CNC machines, including cleaning, lubrication, and minor repairs, to ensure optimal performance. CNC Machinist Qualifications: 3-5 years of machining experience operating CNC lathes or mills in a job shop environment, Doosan experience preferred. Strong knowledge of machining processes, including tool selection, speeds, feeds, and material properties. Proficient in reading and interpreting shop orders and blueprints. Understanding of G and M Code, Fanuc controls, and GD&T. Accurately use precision measurement tools/instruments to determine dimensions and tolerances. If you are ready to be part of a dynamic team that values precision and quality, let's start the conversation about your future with EMT International. Apply Now! About EMT International EMT International is a growing manufacturing company that designs and builds finishing solutions for the printing and packaging industries. From our Wisconsin headquarters to customers around the world, we're known for a culture built on teamwork, accountability, and pride in our work. At EMT, you'll work with people who value clear communication and sharing knowledge. We support career growth through training and tuition reimbursement, offer flexible schedules and paid time off, and provide strong benefits to help you take care of yourself and your family. It's a place where your work matters, your ideas are heard, and you can build a future you're proud of. Why Work at EMT? Together, We Are Better We believe the best ideas come from people working together. Open communication and honest feedback A culture that values collaboration and shared knowledge Transparency and respect across teams Opportunities to learn from each other and grow Grow Your Career We want EMT to be a place you can stay and build something meaningful. Tuition reimbursement and ongoing training Career development and internal growth opportunities Balance Your Life We know life doesn't stop when you clock in. 10 paid holidays Paid vacation Flexible work schedules Support Your Well-Being Your health, safety, and peace of mind matter. Clean, safe working environment Health, dental, vision, and life insurance Short- and long-term disability 401(k) with company match Employee Assistance Program (EAP) Wellness incentive program Have Fun. Give Back. We take pride in what we build and who we build it with. Company outings like baseball games and golf events Anniversaries, retirements, service awards, and new-hire welcomes Community fundraisers, charitable events, and volunteer opportunities PId5949f58eff5-4632
03/27/2026
Full time
Do you have a keen eye for detail and drive to create high-quality products? EMT International, a leading provider of digital finishing solutions, is seeking a skilled CNC Machinist with a strong understanding of programming, machine setup, and tooling. In this position, you will play a crucial role in the manufacturing process by operating CNC machines efficiently to produce parts and components according to engineering specifications and blueprints. CNC Machinist Responsibilities: Setup: Load and adjust cutting tools, as well as select appropriate tooling, fixtures, and materials. Machine Operation: Operate manual or CNC machines to produce tooling, core holding and web finishing parts for machines in a most efficient way possible while maintaining quality. Programming: Develop CNC programs using G & M code and Fanuc control and perform program edits as required. Quality Assurance: Inspects and measures completed parts using precision measuring instruments to identify any defects and ensure parts meet specified tolerances and quality standards. Documentation: Maintain accurate records of production activities, including job setups, tool changes, and inspection results. Maintenance: Perform routine maintenance on CNC machines, including cleaning, lubrication, and minor repairs, to ensure optimal performance. CNC Machinist Qualifications: 3-5 years of machining experience operating CNC lathes or mills in a job shop environment, Doosan experience preferred. Strong knowledge of machining processes, including tool selection, speeds, feeds, and material properties. Proficient in reading and interpreting shop orders and blueprints. Understanding of G and M Code, Fanuc controls, and GD&T. Accurately use precision measurement tools/instruments to determine dimensions and tolerances. If you are ready to be part of a dynamic team that values precision and quality, let's start the conversation about your future with EMT International. Apply Now! About EMT International EMT International is a growing manufacturing company that designs and builds finishing solutions for the printing and packaging industries. From our Wisconsin headquarters to customers around the world, we're known for a culture built on teamwork, accountability, and pride in our work. At EMT, you'll work with people who value clear communication and sharing knowledge. We support career growth through training and tuition reimbursement, offer flexible schedules and paid time off, and provide strong benefits to help you take care of yourself and your family. It's a place where your work matters, your ideas are heard, and you can build a future you're proud of. Why Work at EMT? Together, We Are Better We believe the best ideas come from people working together. Open communication and honest feedback A culture that values collaboration and shared knowledge Transparency and respect across teams Opportunities to learn from each other and grow Grow Your Career We want EMT to be a place you can stay and build something meaningful. Tuition reimbursement and ongoing training Career development and internal growth opportunities Balance Your Life We know life doesn't stop when you clock in. 10 paid holidays Paid vacation Flexible work schedules Support Your Well-Being Your health, safety, and peace of mind matter. Clean, safe working environment Health, dental, vision, and life insurance Short- and long-term disability 401(k) with company match Employee Assistance Program (EAP) Wellness incentive program Have Fun. Give Back. We take pride in what we build and who we build it with. Company outings like baseball games and golf events Anniversaries, retirements, service awards, and new-hire welcomes Community fundraisers, charitable events, and volunteer opportunities PId5949f58eff5-4632
At a Glance Company: Werko Machine Co. Location: Pennsauken, NJ (On-Site) Job Type: Full-Time Pay Range: $25 - $35 per hour (DOE) Shift: 1st Shift - Monday to Friday, 7:30 AM - 4:00 PM Overtime: As Needed Experience Level: Senior (5+ years CNC machining experience) Work Authorization: Must be authorized to work in the U.S. Why This Role Exists Werko Machine Company is expanding capacity in our precision machining operations. As workload increases across custom and high-precision manufacturing projects, we are adding a Lead CNC Mill Machinist to support programming, setup, and operator development on the shop floor. This role plays a critical part in maintaining quality, improving efficiency, and ensuring consistent production standards inside our climate-controlled 18,000 sq. ft. facility in Pennsauken, NJ. The Work You'll Be Doing In this role, you will: Program, set up, and operate CNC milling machines Assist operators with setups, tooling, and process improvements Read and interpret blueprints, drawings, and GD&T Determine workholding, tooling selection, and machining sequence Perform first-article and in-process inspections using calipers, micrometers, and precision gauges Verify dimensional accuracy and hold tight tolerances Troubleshoot machining issues and adjust offsets, feeds, and speeds Support production scheduling and maintain workflow consistency Maintain high professional standards of communication and shop organization This is a hands-on leadership position - not just programming from a desk. Machines, Controls & Software You'll work with equipment such as: CNC Milling Equipment: FEMCO Horizontal Boring Mill (Full B-Axis Rotary) Haas VF-6 with 4th Axis Rotary Milltronics VM Series Fadal 4020 Controls: Haas Milltronics Fanuc-based systems CAM Software: Autodesk CAD/CAM systems Inspection Tools: Calipers Micrometers Precision gauges Large horizontal boring mill experience is a plus. Materials You'll Work With Aluminum Mild & Alloy Steel Stainless Steel Custom high-precision materials What We're Looking For Required 5+ years of CNC machining experience Strong CNC mill programming, setup, and operation experience Proficiency using CAM software Blueprint & GD&T interpretation skills Ability to lead by example on the shop floor Strong troubleshooting and process improvement ability Reliable, organized, and mechanically skilled Preferred Multi-axis CNC machining experience Large horizontal boring mill experience Experience in high-mix or custom manufacturing environments Manual machining knowledge Why Machinists Like Working Here Machinists choose Werko Machine Co. because: Climate-controlled shop environment 75+ years of manufacturing stability Modern equipment across milling, turning, and fabrication Leadership opportunities for experienced machinists Steady 1st shift schedule Respect for skilled tradespeople Pay, Benefits & Schedule Pay Range: $25 - $35 per hour (DOE) Benefits: Health insurance Vision plan Pension plan / 401(k) Life insurance 2 weeks PTO + sick leave End-of-year bonus Schedule: Monday - Friday 7:30 AM - 4:00 PM Overtime: As needed based on production demand Apply Experienced CNC machinists can apply directly through hireCNC. Apply Now or Save This Job to come back later.
03/27/2026
Full time
At a Glance Company: Werko Machine Co. Location: Pennsauken, NJ (On-Site) Job Type: Full-Time Pay Range: $25 - $35 per hour (DOE) Shift: 1st Shift - Monday to Friday, 7:30 AM - 4:00 PM Overtime: As Needed Experience Level: Senior (5+ years CNC machining experience) Work Authorization: Must be authorized to work in the U.S. Why This Role Exists Werko Machine Company is expanding capacity in our precision machining operations. As workload increases across custom and high-precision manufacturing projects, we are adding a Lead CNC Mill Machinist to support programming, setup, and operator development on the shop floor. This role plays a critical part in maintaining quality, improving efficiency, and ensuring consistent production standards inside our climate-controlled 18,000 sq. ft. facility in Pennsauken, NJ. The Work You'll Be Doing In this role, you will: Program, set up, and operate CNC milling machines Assist operators with setups, tooling, and process improvements Read and interpret blueprints, drawings, and GD&T Determine workholding, tooling selection, and machining sequence Perform first-article and in-process inspections using calipers, micrometers, and precision gauges Verify dimensional accuracy and hold tight tolerances Troubleshoot machining issues and adjust offsets, feeds, and speeds Support production scheduling and maintain workflow consistency Maintain high professional standards of communication and shop organization This is a hands-on leadership position - not just programming from a desk. Machines, Controls & Software You'll work with equipment such as: CNC Milling Equipment: FEMCO Horizontal Boring Mill (Full B-Axis Rotary) Haas VF-6 with 4th Axis Rotary Milltronics VM Series Fadal 4020 Controls: Haas Milltronics Fanuc-based systems CAM Software: Autodesk CAD/CAM systems Inspection Tools: Calipers Micrometers Precision gauges Large horizontal boring mill experience is a plus. Materials You'll Work With Aluminum Mild & Alloy Steel Stainless Steel Custom high-precision materials What We're Looking For Required 5+ years of CNC machining experience Strong CNC mill programming, setup, and operation experience Proficiency using CAM software Blueprint & GD&T interpretation skills Ability to lead by example on the shop floor Strong troubleshooting and process improvement ability Reliable, organized, and mechanically skilled Preferred Multi-axis CNC machining experience Large horizontal boring mill experience Experience in high-mix or custom manufacturing environments Manual machining knowledge Why Machinists Like Working Here Machinists choose Werko Machine Co. because: Climate-controlled shop environment 75+ years of manufacturing stability Modern equipment across milling, turning, and fabrication Leadership opportunities for experienced machinists Steady 1st shift schedule Respect for skilled tradespeople Pay, Benefits & Schedule Pay Range: $25 - $35 per hour (DOE) Benefits: Health insurance Vision plan Pension plan / 401(k) Life insurance 2 weeks PTO + sick leave End-of-year bonus Schedule: Monday - Friday 7:30 AM - 4:00 PM Overtime: As needed based on production demand Apply Experienced CNC machinists can apply directly through hireCNC. Apply Now or Save This Job to come back later.
Job Summary The CNC Machinist II sets up and operates CNC equipment to produce precision parts according to specifications. This role is expected to independently perform moderately complex setups and machining operations, troubleshoot issues, and maintain high-quality standards. The ideal candidate is hands-on, collaborative, and comfortable working in a fast-paced production environment. CNC Machinist IIs are often expected to operate multiple machines concurrently to meet production demands. Essential Responsibilities Set up and operate CNC machines, including mills and lathes, to produce parts that meet specifications. Operate multiple CNC machines simultaneously, as production requirements allow. Read and interpret technical drawings, blueprints, and work orders. Select tools and fixtures, install workpieces, and adjust machine settings as needed. Perform quality checks using measuring instruments such as micrometers, calipers, and gauges. Make offset and tooling adjustments to maintain tolerances. Monitor equipment for proper operation and escalate mechanical issues as needed. Accurately document production data, job transactions, and maintenance activity in all required documentation logs and various systems. Adhere to all company, safety, quality, and production standards. Train and mentor less experienced machinists or team members as directed. Support team-based improvement efforts and problem-solving. Perform other duties as assigned. Core Competencies Technical Expertise: Demonstrates strong knowledge of machining practices, tool selection, and measurement techniques. Attention to Detail: Ensures precision in setup, machining, and final inspection of parts. Troubleshooting Ability: Quickly identifies and corrects machine or process issues. Collaboration: Works effectively with cross-functional teams to meet production goals. Adaptability: Adjusts quickly to shifting priorities and production demands. Sense of Urgency: Maintains a productive pace while meeting quality standards. Commitment to Safety: Consistently follows safety protocols and promotes safe practices. Qualifications High school diploma or GED required. 3-5 years of CNC machining experience. Proficient in reading blueprints and using precision measurement tools. Familiarity with multiple machine controls (e.g., Haas, Fanuc) preferred. Working knowledge of G&M code and basic machine programming adjustments. Basic math, computer, and documentation skills. Work Environment The role is performed in a manufacturing shop environment. Exposure to moving mechanical parts, sharp tools, noise, vibration, and occasional fumes or airborne particles. The facility is climate-controlled in some areas, but temperature fluctuations may occur depending on the season and location. The role requires consistent use of personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and steel-toed footwear. Work is performed near others in a team-based setting. Physical Requirements Must be able to stand for extended periods (up to 10 hours per shift). Regularly required to walk, reach, bend, crouch, twist, and use hands to operate machinery. Ability to lift, push, pull, and carry up to 25 pounds independently. Occasional lifting of heavier items with team assistance or lifting devices. Visual acuity required for reading blueprints and performing detailed inspections. Manual dexterity needed for handling small parts, tools, and machine controls. Reasonable Accommodation Evantic is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Disclaimer This job description outlines the general responsibilities and requirements of the role and is not intended to be an exhaustive list. Duties may change based on business needs. This description does not constitute a contract for employment. Management reserves the right to assign or reassign duties and responsibilities at any time.
03/27/2026
Full time
Job Summary The CNC Machinist II sets up and operates CNC equipment to produce precision parts according to specifications. This role is expected to independently perform moderately complex setups and machining operations, troubleshoot issues, and maintain high-quality standards. The ideal candidate is hands-on, collaborative, and comfortable working in a fast-paced production environment. CNC Machinist IIs are often expected to operate multiple machines concurrently to meet production demands. Essential Responsibilities Set up and operate CNC machines, including mills and lathes, to produce parts that meet specifications. Operate multiple CNC machines simultaneously, as production requirements allow. Read and interpret technical drawings, blueprints, and work orders. Select tools and fixtures, install workpieces, and adjust machine settings as needed. Perform quality checks using measuring instruments such as micrometers, calipers, and gauges. Make offset and tooling adjustments to maintain tolerances. Monitor equipment for proper operation and escalate mechanical issues as needed. Accurately document production data, job transactions, and maintenance activity in all required documentation logs and various systems. Adhere to all company, safety, quality, and production standards. Train and mentor less experienced machinists or team members as directed. Support team-based improvement efforts and problem-solving. Perform other duties as assigned. Core Competencies Technical Expertise: Demonstrates strong knowledge of machining practices, tool selection, and measurement techniques. Attention to Detail: Ensures precision in setup, machining, and final inspection of parts. Troubleshooting Ability: Quickly identifies and corrects machine or process issues. Collaboration: Works effectively with cross-functional teams to meet production goals. Adaptability: Adjusts quickly to shifting priorities and production demands. Sense of Urgency: Maintains a productive pace while meeting quality standards. Commitment to Safety: Consistently follows safety protocols and promotes safe practices. Qualifications High school diploma or GED required. 3-5 years of CNC machining experience. Proficient in reading blueprints and using precision measurement tools. Familiarity with multiple machine controls (e.g., Haas, Fanuc) preferred. Working knowledge of G&M code and basic machine programming adjustments. Basic math, computer, and documentation skills. Work Environment The role is performed in a manufacturing shop environment. Exposure to moving mechanical parts, sharp tools, noise, vibration, and occasional fumes or airborne particles. The facility is climate-controlled in some areas, but temperature fluctuations may occur depending on the season and location. The role requires consistent use of personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and steel-toed footwear. Work is performed near others in a team-based setting. Physical Requirements Must be able to stand for extended periods (up to 10 hours per shift). Regularly required to walk, reach, bend, crouch, twist, and use hands to operate machinery. Ability to lift, push, pull, and carry up to 25 pounds independently. Occasional lifting of heavier items with team assistance or lifting devices. Visual acuity required for reading blueprints and performing detailed inspections. Manual dexterity needed for handling small parts, tools, and machine controls. Reasonable Accommodation Evantic is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Disclaimer This job description outlines the general responsibilities and requirements of the role and is not intended to be an exhaustive list. Duties may change based on business needs. This description does not constitute a contract for employment. Management reserves the right to assign or reassign duties and responsibilities at any time.
Job Summary The CNC Machinist II sets up and operates CNC equipment to produce precision parts according to specifications. This role is expected to independently perform moderately complex setups and machining operations, troubleshoot issues, and maintain high-quality standards. The ideal candidate is hands-on, collaborative, and comfortable working in a fast-paced production environment. CNC Machinist IIs are often expected to operate multiple machines concurrently to meet production demands. Essential Responsibilities Set up and operate CNC machines, including mills and lathes, to produce parts that meet specifications. Operate multiple CNC machines simultaneously, as production requirements allow. Read and interpret technical drawings, blueprints, and work orders. Select tools and fixtures, install workpieces, and adjust machine settings as needed. Perform quality checks using measuring instruments such as micrometers, calipers, and gauges. Make offset and tooling adjustments to maintain tolerances. Monitor equipment for proper operation and escalate mechanical issues as needed. Accurately document production data, job transactions, and maintenance activity in all required documentation logs and various systems. Adhere to all company, safety, quality, and production standards. Train and mentor less experienced machinists or team members as directed. Support team-based improvement efforts and problem-solving. Perform other duties as assigned. Core Competencies Technical Expertise: Demonstrates strong knowledge of machining practices, tool selection, and measurement techniques. Attention to Detail: Ensures precision in setup, machining, and final inspection of parts. Troubleshooting Ability: Quickly identifies and corrects machine or process issues. Collaboration: Works effectively with cross-functional teams to meet production goals. Adaptability: Adjusts quickly to shifting priorities and production demands. Sense of Urgency: Maintains a productive pace while meeting quality standards. Commitment to Safety: Consistently follows safety protocols and promotes safe practices. Qualifications High school diploma or GED required. 3-5 years of CNC machining experience. Proficient in reading blueprints and using precision measurement tools. Familiarity with multiple machine controls (e.g., Haas, Fanuc) preferred. Working knowledge of G&M code and basic machine programming adjustments. Basic math, computer, and documentation skills. Work Environment The role is performed in a manufacturing shop environment. Exposure to moving mechanical parts, sharp tools, noise, vibration, and occasional fumes or airborne particles. The facility is climate-controlled in some areas, but temperature fluctuations may occur depending on the season and location. The role requires consistent use of personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and steel-toed footwear. Work is performed near others in a team-based setting. Physical Requirements Must be able to stand for extended periods (up to 10 hours per shift). Regularly required to walk, reach, bend, crouch, twist, and use hands to operate machinery. Ability to lift, push, pull, and carry up to 25 pounds independently. Occasional lifting of heavier items with team assistance or lifting devices. Visual acuity required for reading blueprints and performing detailed inspections. Manual dexterity needed for handling small parts, tools, and machine controls. Reasonable Accommodation Evantic is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Disclaimer This job description outlines the general responsibilities and requirements of the role and is not intended to be an exhaustive list. Duties may change based on business needs. This description does not constitute a contract for employment. Management reserves the right to assign or reassign duties and responsibilities at any time.
03/27/2026
Full time
Job Summary The CNC Machinist II sets up and operates CNC equipment to produce precision parts according to specifications. This role is expected to independently perform moderately complex setups and machining operations, troubleshoot issues, and maintain high-quality standards. The ideal candidate is hands-on, collaborative, and comfortable working in a fast-paced production environment. CNC Machinist IIs are often expected to operate multiple machines concurrently to meet production demands. Essential Responsibilities Set up and operate CNC machines, including mills and lathes, to produce parts that meet specifications. Operate multiple CNC machines simultaneously, as production requirements allow. Read and interpret technical drawings, blueprints, and work orders. Select tools and fixtures, install workpieces, and adjust machine settings as needed. Perform quality checks using measuring instruments such as micrometers, calipers, and gauges. Make offset and tooling adjustments to maintain tolerances. Monitor equipment for proper operation and escalate mechanical issues as needed. Accurately document production data, job transactions, and maintenance activity in all required documentation logs and various systems. Adhere to all company, safety, quality, and production standards. Train and mentor less experienced machinists or team members as directed. Support team-based improvement efforts and problem-solving. Perform other duties as assigned. Core Competencies Technical Expertise: Demonstrates strong knowledge of machining practices, tool selection, and measurement techniques. Attention to Detail: Ensures precision in setup, machining, and final inspection of parts. Troubleshooting Ability: Quickly identifies and corrects machine or process issues. Collaboration: Works effectively with cross-functional teams to meet production goals. Adaptability: Adjusts quickly to shifting priorities and production demands. Sense of Urgency: Maintains a productive pace while meeting quality standards. Commitment to Safety: Consistently follows safety protocols and promotes safe practices. Qualifications High school diploma or GED required. 3-5 years of CNC machining experience. Proficient in reading blueprints and using precision measurement tools. Familiarity with multiple machine controls (e.g., Haas, Fanuc) preferred. Working knowledge of G&M code and basic machine programming adjustments. Basic math, computer, and documentation skills. Work Environment The role is performed in a manufacturing shop environment. Exposure to moving mechanical parts, sharp tools, noise, vibration, and occasional fumes or airborne particles. The facility is climate-controlled in some areas, but temperature fluctuations may occur depending on the season and location. The role requires consistent use of personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and steel-toed footwear. Work is performed near others in a team-based setting. Physical Requirements Must be able to stand for extended periods (up to 10 hours per shift). Regularly required to walk, reach, bend, crouch, twist, and use hands to operate machinery. Ability to lift, push, pull, and carry up to 25 pounds independently. Occasional lifting of heavier items with team assistance or lifting devices. Visual acuity required for reading blueprints and performing detailed inspections. Manual dexterity needed for handling small parts, tools, and machine controls. Reasonable Accommodation Evantic is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Disclaimer This job description outlines the general responsibilities and requirements of the role and is not intended to be an exhaustive list. Duties may change based on business needs. This description does not constitute a contract for employment. Management reserves the right to assign or reassign duties and responsibilities at any time.
Job Summary The CNC Machinist II sets up and operates CNC equipment to produce precision parts according to specifications. This role is expected to independently perform moderately complex setups and machining operations, troubleshoot issues, and maintain high-quality standards. The ideal candidate is hands-on, collaborative, and comfortable working in a fast-paced production environment. CNC Machinist IIs are often expected to operate multiple machines concurrently to meet production demands. Essential Responsibilities Set up and operate CNC machines, including mills and lathes, to produce parts that meet specifications. Operate multiple CNC machines simultaneously, as production requirements allow. Read and interpret technical drawings, blueprints, and work orders. Select tools and fixtures, install workpieces, and adjust machine settings as needed. Perform quality checks using measuring instruments such as micrometers, calipers, and gauges. Make offset and tooling adjustments to maintain tolerances. Monitor equipment for proper operation and escalate mechanical issues as needed. Accurately document production data, job transactions, and maintenance activity in all required documentation logs and various systems. Adhere to all company, safety, quality, and production standards. Train and mentor less experienced machinists or team members as directed. Support team-based improvement efforts and problem-solving. Perform other duties as assigned. Core Competencies Technical Expertise: Demonstrates strong knowledge of machining practices, tool selection, and measurement techniques. Attention to Detail: Ensures precision in setup, machining, and final inspection of parts. Troubleshooting Ability: Quickly identifies and corrects machine or process issues. Collaboration: Works effectively with cross-functional teams to meet production goals. Adaptability: Adjusts quickly to shifting priorities and production demands. Sense of Urgency: Maintains a productive pace while meeting quality standards. Commitment to Safety: Consistently follows safety protocols and promotes safe practices. Qualifications High school diploma or GED required. 3-5 years of CNC machining experience. Proficient in reading blueprints and using precision measurement tools. Familiarity with multiple machine controls (e.g., Haas, Fanuc) preferred. Working knowledge of G&M code and basic machine programming adjustments. Basic math, computer, and documentation skills. Work Environment The role is performed in a manufacturing shop environment. Exposure to moving mechanical parts, sharp tools, noise, vibration, and occasional fumes or airborne particles. The facility is climate-controlled in some areas, but temperature fluctuations may occur depending on the season and location. The role requires consistent use of personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and steel-toed footwear. Work is performed near others in a team-based setting. Physical Requirements Must be able to stand for extended periods (up to 10 hours per shift). Regularly required to walk, reach, bend, crouch, twist, and use hands to operate machinery. Ability to lift, push, pull, and carry up to 25 pounds independently. Occasional lifting of heavier items with team assistance or lifting devices. Visual acuity required for reading blueprints and performing detailed inspections. Manual dexterity needed for handling small parts, tools, and machine controls. Reasonable Accommodation Evantic is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Disclaimer This job description outlines the general responsibilities and requirements of the role and is not intended to be an exhaustive list. Duties may change based on business needs. This description does not constitute a contract for employment. Management reserves the right to assign or reassign duties and responsibilities at any time.
03/27/2026
Full time
Job Summary The CNC Machinist II sets up and operates CNC equipment to produce precision parts according to specifications. This role is expected to independently perform moderately complex setups and machining operations, troubleshoot issues, and maintain high-quality standards. The ideal candidate is hands-on, collaborative, and comfortable working in a fast-paced production environment. CNC Machinist IIs are often expected to operate multiple machines concurrently to meet production demands. Essential Responsibilities Set up and operate CNC machines, including mills and lathes, to produce parts that meet specifications. Operate multiple CNC machines simultaneously, as production requirements allow. Read and interpret technical drawings, blueprints, and work orders. Select tools and fixtures, install workpieces, and adjust machine settings as needed. Perform quality checks using measuring instruments such as micrometers, calipers, and gauges. Make offset and tooling adjustments to maintain tolerances. Monitor equipment for proper operation and escalate mechanical issues as needed. Accurately document production data, job transactions, and maintenance activity in all required documentation logs and various systems. Adhere to all company, safety, quality, and production standards. Train and mentor less experienced machinists or team members as directed. Support team-based improvement efforts and problem-solving. Perform other duties as assigned. Core Competencies Technical Expertise: Demonstrates strong knowledge of machining practices, tool selection, and measurement techniques. Attention to Detail: Ensures precision in setup, machining, and final inspection of parts. Troubleshooting Ability: Quickly identifies and corrects machine or process issues. Collaboration: Works effectively with cross-functional teams to meet production goals. Adaptability: Adjusts quickly to shifting priorities and production demands. Sense of Urgency: Maintains a productive pace while meeting quality standards. Commitment to Safety: Consistently follows safety protocols and promotes safe practices. Qualifications High school diploma or GED required. 3-5 years of CNC machining experience. Proficient in reading blueprints and using precision measurement tools. Familiarity with multiple machine controls (e.g., Haas, Fanuc) preferred. Working knowledge of G&M code and basic machine programming adjustments. Basic math, computer, and documentation skills. Work Environment The role is performed in a manufacturing shop environment. Exposure to moving mechanical parts, sharp tools, noise, vibration, and occasional fumes or airborne particles. The facility is climate-controlled in some areas, but temperature fluctuations may occur depending on the season and location. The role requires consistent use of personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and steel-toed footwear. Work is performed near others in a team-based setting. Physical Requirements Must be able to stand for extended periods (up to 10 hours per shift). Regularly required to walk, reach, bend, crouch, twist, and use hands to operate machinery. Ability to lift, push, pull, and carry up to 25 pounds independently. Occasional lifting of heavier items with team assistance or lifting devices. Visual acuity required for reading blueprints and performing detailed inspections. Manual dexterity needed for handling small parts, tools, and machine controls. Reasonable Accommodation Evantic is committed to providing equal employment opportunities to qualified individuals with disabilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Disclaimer This job description outlines the general responsibilities and requirements of the role and is not intended to be an exhaustive list. Duties may change based on business needs. This description does not constitute a contract for employment. Management reserves the right to assign or reassign duties and responsibilities at any time.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is currently seeking an Aircraft Machinist to join our team in North Charleston, South Carolina on Variable shift. Position Responsibilities: Reads and interprets moderately complex blueprint drawings and specifications to set-up and machine items to fabricate out of sequence emergent production parts as required using manual and CNC machines Develops and revises Machine Control Data (MCD) and geometry Assists other machinists in completing job responsibilities Follows detailed verbal and/or written instructions This position is expected to be 100% onsite. The selected candidate will be required to work onsite at North Charleston, SC (BSC) Employer will not sponsor applicants for employment visa status. Basic Qualifications (Required Skills/Experience): 3+ years of aerospace, fabrication, or manufacturing experience 1+ year of experience reading and interpreting machine code data (MCD) 1+ year experience setting up and operating Manual and/or CNC machines Are you available to work variable shifts, with the understanding that your assigned shift will not be confirmed until after training? Preferred Qualifications (Desired Skills/Experience): 787 Program Experience Experience in a team environment 3+ years of experience using manual mill and lathe machines 3+ years of experience setting up and fixtures, operating, and programming CNC machines with 3 and 5 axis CNC machines 3+ years of experience setting up NC/CNC machines, including probing and using dial indicators to establish set points Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift This position is for variable shift (shift 4). Variable shift means you will be assigned a shift at the time of hire based on business needs. You will remain on your assigned work shift until re-evaluation is required. Shifts assigned for training may differ from your permanent work shift Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $68,400-$72,000 Applications for this position will be accepted until Apr. 01, 2026 Export Control Requirements: This is not an Export Control position. Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
03/26/2026
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is currently seeking an Aircraft Machinist to join our team in North Charleston, South Carolina on Variable shift. Position Responsibilities: Reads and interprets moderately complex blueprint drawings and specifications to set-up and machine items to fabricate out of sequence emergent production parts as required using manual and CNC machines Develops and revises Machine Control Data (MCD) and geometry Assists other machinists in completing job responsibilities Follows detailed verbal and/or written instructions This position is expected to be 100% onsite. The selected candidate will be required to work onsite at North Charleston, SC (BSC) Employer will not sponsor applicants for employment visa status. Basic Qualifications (Required Skills/Experience): 3+ years of aerospace, fabrication, or manufacturing experience 1+ year of experience reading and interpreting machine code data (MCD) 1+ year experience setting up and operating Manual and/or CNC machines Are you available to work variable shifts, with the understanding that your assigned shift will not be confirmed until after training? Preferred Qualifications (Desired Skills/Experience): 787 Program Experience Experience in a team environment 3+ years of experience using manual mill and lathe machines 3+ years of experience setting up and fixtures, operating, and programming CNC machines with 3 and 5 axis CNC machines 3+ years of experience setting up NC/CNC machines, including probing and using dial indicators to establish set points Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift This position is for variable shift (shift 4). Variable shift means you will be assigned a shift at the time of hire based on business needs. You will remain on your assigned work shift until re-evaluation is required. Shifts assigned for training may differ from your permanent work shift Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $68,400-$72,000 Applications for this position will be accepted until Apr. 01, 2026 Export Control Requirements: This is not an Export Control position. Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
03/26/2026
Full time
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
03/26/2026
Full time
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
03/26/2026
Full time
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
03/26/2026
Full time
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
03/26/2026
Full time
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
03/26/2026
Full time
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
Custom Engineering Company
Harborcreek, Pennsylvania
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
03/26/2026
Full time
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
03/26/2026
Full time
Description: Lamjen, Inc. is currently seeking 1st shift openings for a CNC Programmer/ Set Up Technician/ Machinist: Provide programming and machining expertise in support of customer requests. Program, set up and operate machinery for the fabrication of parts. Work assignments are varied and of the highest level of scope and complexity. Requirements: Set-up, operate, and program CNC machines, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Read blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders. Calculate and set controls to regulate machining factors such as speed, feed, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements. Stop machines to remove finished work pieces or to change tooling, setup, or work piece placement, according to required machining sequences. Conduct periodic inspections to ensure equipment and tools are in good working order and available for use when required. Maintains safe operations by adhering to safety procedures and regulations. Update job knowledge by participating in educational opportunities; reading technical publications. Perform all other duties as assigned. Compensation details: 27-31 Hourly Wage PI7c76fcaf1-
Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028) Shift: 3rd Shift (3rd shift - Sunday - Friday 11pm - 7am) About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at and join us to own your future. Job Overview: We are looking for a skilled CNC Machinist to perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision. Responsibilities: Uses blueprints, sketches, drawings, and/or job instruction sheets to produce dimensions and tolerances of finished work-piece and setup requirements. Cutting tools, attachments, accessories, and materials on machines such as mills, lathes, grinders, machining centers, drill presses, and drill machines. Enters commands to retrieve, input, or edit control information for CNC machines. Sets up, operates, and monitors machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required. Utilizes a variety of measurement tools and methods to evaluate finished parts against specifications. Reworks parts that don't meet specifications. Confers with supervisor, engineers, and production personnel to resolve machining problems. Follows all ISO procedures and safety rules, including wearing personal safety equipment and performing hoist inspections. Routes completed parts to next machine according to the routing sequence. Performs data entry on the computer to update part locations. Updates work order cover sheets, daily production sheets, status sheets, and quality records. Participates in regular communication among peers and Team Leads to maintain productivity and solve problems as they arise. Operates with the close attention to detail required to meet print specifications, down to 0.0002in tolerances. Maintains 5S standards of organization and housekeeping of work area. Participates in improvement efforts for cell layout, process efficiencies, etc. Attends monthly departmental meetings and quarterly town hall meetings. Requirements: High school diploma or GED 2+ years of CNC machining experience Key Competencies: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, memos, and procedure manuals. Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization. Ability to perform basic calculations with numbers between 0.0001 and 0.1 Ability to convert between metric and US standard units of measure. Ability to understand and carry out detailed written or oral instructions. Ability to deal with problems involving several variables Ability to use standard problem-solving methods (ie. 5 Whys) as trained Ability to stand and walk up to 8 hours continuously during a shift. Ability to lift up to 35 lbs alone, or 70 lbs with assistance, repeatedly over an 8 hour shift Ability to push or pull up to 35 lbs. Ability to see or have vision corrected with glasses/contacts to an evaluated level of no worse than 20/35. Preferences: Associates degree, or training certification Ability to effectively use tools such as the following: depth gages, bore gages, height gages, feeler gages, micrometers, calipers, deburring tools, die grinders, drill presses, overhead lifting equipment, etc. Travel & Work Arrangements/Requirements: This position will be based at our site in Mocksville, NC, with no anticipated travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . PandoLogic. Category:Manufacturing,
03/26/2026
Full time
Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Mocksville, NC (Onsite) (338 Valley Rd. Mocksville, NC 27028) Shift: 3rd Shift (3rd shift - Sunday - Friday 11pm - 7am) About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at and join us to own your future. Job Overview: We are looking for a skilled CNC Machinist to perform a variety of tasks as assigned in conjunction with the assembly of our product. You will ensure all parts fit correctly and are suitable for the final product. This position is responsible for safely performing high-level continuous work to quality standards. Assignments may change based on business demands. You must have desired technical knowledge and possess great manual dexterity. Ability to interpret instructions represented in manuals, drawings, schematics etc. and follow them with precision. Responsibilities: Uses blueprints, sketches, drawings, and/or job instruction sheets to produce dimensions and tolerances of finished work-piece and setup requirements. Cutting tools, attachments, accessories, and materials on machines such as mills, lathes, grinders, machining centers, drill presses, and drill machines. Enters commands to retrieve, input, or edit control information for CNC machines. Sets up, operates, and monitors machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required. Utilizes a variety of measurement tools and methods to evaluate finished parts against specifications. Reworks parts that don't meet specifications. Confers with supervisor, engineers, and production personnel to resolve machining problems. Follows all ISO procedures and safety rules, including wearing personal safety equipment and performing hoist inspections. Routes completed parts to next machine according to the routing sequence. Performs data entry on the computer to update part locations. Updates work order cover sheets, daily production sheets, status sheets, and quality records. Participates in regular communication among peers and Team Leads to maintain productivity and solve problems as they arise. Operates with the close attention to detail required to meet print specifications, down to 0.0002in tolerances. Maintains 5S standards of organization and housekeeping of work area. Participates in improvement efforts for cell layout, process efficiencies, etc. Attends monthly departmental meetings and quarterly town hall meetings. Requirements: High school diploma or GED 2+ years of CNC machining experience Key Competencies: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, memos, and procedure manuals. Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization. Ability to perform basic calculations with numbers between 0.0001 and 0.1 Ability to convert between metric and US standard units of measure. Ability to understand and carry out detailed written or oral instructions. Ability to deal with problems involving several variables Ability to use standard problem-solving methods (ie. 5 Whys) as trained Ability to stand and walk up to 8 hours continuously during a shift. Ability to lift up to 35 lbs alone, or 70 lbs with assistance, repeatedly over an 8 hour shift Ability to push or pull up to 35 lbs. Ability to see or have vision corrected with glasses/contacts to an evaluated level of no worse than 20/35. Preferences: Associates degree, or training certification Ability to effectively use tools such as the following: depth gages, bore gages, height gages, feeler gages, micrometers, calipers, deburring tools, die grinders, drill presses, overhead lifting equipment, etc. Travel & Work Arrangements/Requirements: This position will be based at our site in Mocksville, NC, with no anticipated travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . PandoLogic. Category:Manufacturing,
Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Lathe Machinist Location: Ivyland, PA (Onsite)(Milton Roy - 201 Ivyland Rd. Warminster, PA 18974) Shift: 1st Shift Mon - Fri (7am - 330pm) - Direct Hire, Full time Role About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at and join us to own your future. Job Overview: We are currently seeking a reliable and detailed individual to join our Machine Shop team. This role will be responsible for setting up, adjusting, and operating machine tools to create products according to engineering specifications, ensuring high quality and efficiency in a manufacturing facility. A Machinist works with a team to contribute to production goals and operating various machine tools to produce precision parts and components while adhering to safety and quality standards. The ideal candidate is consistent, a team player, a great communicator, and can meet deadlines and prioritize multiple projects. Responsibilities: Set up and run production on all machines while managing tool conditions. Follow and develop standard work for setup, inspection, and deburring. Setup and operate machine tools, including lathes machines, grinders, and CNC machines (CNC Horizontal, CNC Vertical, CNC Turning). Set up and operate at least three categories of machines (manual machining, turning centres, Lathe machines, Lathe machines, grinders, etc). Select and install appropriate tooling, fixtures, and materials for each job. Use precision measuring instruments such as calipers, micrometers, and gauges to ensure parts meet specified tolerances. Operate machines to manufacture parts, following detailed blueprints, work instructions, and quality standards. Identify and report defects or issues in the machinist process and necessary adjustments or repairs to ensure product quality. Perform routine maintenance on machine tools to ensure they operate effectively and safely. Report any significant machine malfunctions or maintenance requirements to the supervisor. Troubleshoot and diagnose machine issues, making minor repairs or adjustments. Maintain accurate records of production activities, including job setup, run times, and material usage. Report any deviations from specifications or quality issues to the appropriate personnel. Document any issues, defects, or deviations from standard procedures. Complete production logs, work orders, and other required paperwork accurately. Collaborate with colleagues, engineers, and supervisors to optimize processes and resolve production challenges. Participate in team meetings and contribute ideas for continuous improvement. Participate in training programs to improve Machinist skills and product knowledge. Attend monthly EHS trainings. Follow all safety guidelines, including wearing appropriate personal protective equipment (PPE). Report any safety hazards or incidents to supervisors promptly. Requirements: High School Diploma or GED 2+ years' experience in operating CNC Lathe machines in a manufacturing environment Core Competencies: Experience using various hand, pneumatic, and power tools, such as screwdrivers, wrenches, drills, and presses Experience in using Precision Measuring tools (Calipers, Micrometers, Gages Etc) Ability to read and understand the bill of materials and work instructions, blueprints, or technical drawings Ability to problem solve, with strong verbal and written communication Demonstrated time management skills, strategic thinking, and adaptability Lift a maximum of 35 lbs for an individual and 70 lbs for a team lift Test PSI limit no greater than 30,000 Preferences: 2+ years' experience in manufacturing or other fast paced operations, preferred General computer knowledge (i.e. log on credentials (SSO), JD Edwards, and Microsoft Outlook) Program machines with high complexity, independently utilizing Mazatrol and G and M codes. Travel & Work Arrangements/Requirements: This position will be based at our site in Ivyland, PA no travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . PandoLogic. Category:Manufacturing,
03/26/2026
Full time
Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Lathe Machinist Location: Ivyland, PA (Onsite)(Milton Roy - 201 Ivyland Rd. Warminster, PA 18974) Shift: 1st Shift Mon - Fri (7am - 330pm) - Direct Hire, Full time Role About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at and join us to own your future. Job Overview: We are currently seeking a reliable and detailed individual to join our Machine Shop team. This role will be responsible for setting up, adjusting, and operating machine tools to create products according to engineering specifications, ensuring high quality and efficiency in a manufacturing facility. A Machinist works with a team to contribute to production goals and operating various machine tools to produce precision parts and components while adhering to safety and quality standards. The ideal candidate is consistent, a team player, a great communicator, and can meet deadlines and prioritize multiple projects. Responsibilities: Set up and run production on all machines while managing tool conditions. Follow and develop standard work for setup, inspection, and deburring. Setup and operate machine tools, including lathes machines, grinders, and CNC machines (CNC Horizontal, CNC Vertical, CNC Turning). Set up and operate at least three categories of machines (manual machining, turning centres, Lathe machines, Lathe machines, grinders, etc). Select and install appropriate tooling, fixtures, and materials for each job. Use precision measuring instruments such as calipers, micrometers, and gauges to ensure parts meet specified tolerances. Operate machines to manufacture parts, following detailed blueprints, work instructions, and quality standards. Identify and report defects or issues in the machinist process and necessary adjustments or repairs to ensure product quality. Perform routine maintenance on machine tools to ensure they operate effectively and safely. Report any significant machine malfunctions or maintenance requirements to the supervisor. Troubleshoot and diagnose machine issues, making minor repairs or adjustments. Maintain accurate records of production activities, including job setup, run times, and material usage. Report any deviations from specifications or quality issues to the appropriate personnel. Document any issues, defects, or deviations from standard procedures. Complete production logs, work orders, and other required paperwork accurately. Collaborate with colleagues, engineers, and supervisors to optimize processes and resolve production challenges. Participate in team meetings and contribute ideas for continuous improvement. Participate in training programs to improve Machinist skills and product knowledge. Attend monthly EHS trainings. Follow all safety guidelines, including wearing appropriate personal protective equipment (PPE). Report any safety hazards or incidents to supervisors promptly. Requirements: High School Diploma or GED 2+ years' experience in operating CNC Lathe machines in a manufacturing environment Core Competencies: Experience using various hand, pneumatic, and power tools, such as screwdrivers, wrenches, drills, and presses Experience in using Precision Measuring tools (Calipers, Micrometers, Gages Etc) Ability to read and understand the bill of materials and work instructions, blueprints, or technical drawings Ability to problem solve, with strong verbal and written communication Demonstrated time management skills, strategic thinking, and adaptability Lift a maximum of 35 lbs for an individual and 70 lbs for a team lift Test PSI limit no greater than 30,000 Preferences: 2+ years' experience in manufacturing or other fast paced operations, preferred General computer knowledge (i.e. log on credentials (SSO), JD Edwards, and Microsoft Outlook) Program machines with high complexity, independently utilizing Mazatrol and G and M codes. Travel & Work Arrangements/Requirements: This position will be based at our site in Ivyland, PA no travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . PandoLogic. Category:Manufacturing,
Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Ivyland, PA (Onsite)(Milton Roy - 201 Ivyland Rd. Warminster, PA 18974) Shift: 2nd Shift Mon - Fri (330pm - 12am) - Direct Hire, Full time Role About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at and join us to own your future. Job Overview: We are currently seeking a precise and detailed individual to join our Machinist team. This role will be responsible for setting up, adjusting, programming with assistance, G-coding, and operating machine tools with guidance to create products according to engineering specifications, ensuring high quality and efficiency in a manufacturing facility. A CNC Machinist works with a team to contribute to production goals and operating various machine tools to produce precision parts and components while adhering to safety and quality standards. The ideal candidate is consistent, a team player, productive, and can meet deadlines and prioritize multiple projects. Responsibilities: Set up and run production on all machines while managing tool conditions Program machines with minimal complexity, and learning to program at higher complexity with assistance utilizing Mazatrol and G and M codes Follow and develop standard work for setup, inspection, and deburring Adapt new procedures, techniques, tools, materials, and equipment when needed Meet or exceed production targets and quotas Collaborate with team members to optimize workflow and achieve daily and monthly targets Setup and operate machine tools, including lathes, milling machines, grinders, and CNC machines (CNC Horizontal, CNC Vertical, CNC Turning) Set up and operate at least one category of machines (manual machining, turning centres, milling machines, mill-turn machines, grinders, etc) Select and install appropriate tooling, fixtures, and materials for each job Operate machines to manufacture parts, following detailed blueprints, work instructions, and quality standards Conduct inspections to verify the accuracy and quality of finished products per ISO requirements. Identify and report defects or issues in the machinist process and necessary adjustments or repairs to ensure product quality Monitor machine performance and adjust to maintain product quality and machine efficiency Use precision measuring instruments such as callipers, micrometres, and gauges to ensure parts meets specified tolerances Perform routine maintenance on machine tools to ensure they operate effectively and safely Troubleshoot and diagnose machine issues, making minor repairs or adjustments Report any significant machine malfunctions or maintenance requirements to the supervisor Document inspection results in SPC data collection workbook Maintain accurate records of production activities, including job setup, run times, and material usage Report any deviations from specifications or quality issues to the appropriate personnel Document any issues, defects, or deviations from standard procedures Complete production logs, work orders, and other required paperwork accurately Requirements: High School Diploma or GED 2+ years' experience in operating CNC machines in a manufaturing enviroment Core Competencies: Experience using various hand, pneumatic, and power tools, such as screwdrivers, wrenches, drills, and presses Experience in using Precision Measuring tools (Calipers, Micrometers, Gages Etc) Ability to read and understand the bill of materials and work instructions, blueprints, or technical drawings Ability to problem solve, with strong verbal and written communication Demonstrated time management skills, strategic thinking, and adaptability Lift a maximum of 35 lbs for an individual and 70 lbs for a team lift Test PSI limit no greater than 30,000 Preferences: 2+ years' experience in manufacturing or other fast paced operations, preferred General computer knowledge (i.e. log on credentials (SSO), JD Edwards, and Microsoft Outlook) Program machines with high complexity, independently utilizing Mazatrol and G and M codes. Travel & Work Arrangements/Requirements: This position will be based at our site in Ivyland, PA no travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . PandoLogic. Category:Manufacturing,
03/26/2026
Full time
Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Title: CNC Machinist Location: Ivyland, PA (Onsite)(Milton Roy - 201 Ivyland Rd. Warminster, PA 18974) Shift: 2nd Shift Mon - Fri (330pm - 12am) - Direct Hire, Full time Role About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at and join us to own your future. Job Overview: We are currently seeking a precise and detailed individual to join our Machinist team. This role will be responsible for setting up, adjusting, programming with assistance, G-coding, and operating machine tools with guidance to create products according to engineering specifications, ensuring high quality and efficiency in a manufacturing facility. A CNC Machinist works with a team to contribute to production goals and operating various machine tools to produce precision parts and components while adhering to safety and quality standards. The ideal candidate is consistent, a team player, productive, and can meet deadlines and prioritize multiple projects. Responsibilities: Set up and run production on all machines while managing tool conditions Program machines with minimal complexity, and learning to program at higher complexity with assistance utilizing Mazatrol and G and M codes Follow and develop standard work for setup, inspection, and deburring Adapt new procedures, techniques, tools, materials, and equipment when needed Meet or exceed production targets and quotas Collaborate with team members to optimize workflow and achieve daily and monthly targets Setup and operate machine tools, including lathes, milling machines, grinders, and CNC machines (CNC Horizontal, CNC Vertical, CNC Turning) Set up and operate at least one category of machines (manual machining, turning centres, milling machines, mill-turn machines, grinders, etc) Select and install appropriate tooling, fixtures, and materials for each job Operate machines to manufacture parts, following detailed blueprints, work instructions, and quality standards Conduct inspections to verify the accuracy and quality of finished products per ISO requirements. Identify and report defects or issues in the machinist process and necessary adjustments or repairs to ensure product quality Monitor machine performance and adjust to maintain product quality and machine efficiency Use precision measuring instruments such as callipers, micrometres, and gauges to ensure parts meets specified tolerances Perform routine maintenance on machine tools to ensure they operate effectively and safely Troubleshoot and diagnose machine issues, making minor repairs or adjustments Report any significant machine malfunctions or maintenance requirements to the supervisor Document inspection results in SPC data collection workbook Maintain accurate records of production activities, including job setup, run times, and material usage Report any deviations from specifications or quality issues to the appropriate personnel Document any issues, defects, or deviations from standard procedures Complete production logs, work orders, and other required paperwork accurately Requirements: High School Diploma or GED 2+ years' experience in operating CNC machines in a manufaturing enviroment Core Competencies: Experience using various hand, pneumatic, and power tools, such as screwdrivers, wrenches, drills, and presses Experience in using Precision Measuring tools (Calipers, Micrometers, Gages Etc) Ability to read and understand the bill of materials and work instructions, blueprints, or technical drawings Ability to problem solve, with strong verbal and written communication Demonstrated time management skills, strategic thinking, and adaptability Lift a maximum of 35 lbs for an individual and 70 lbs for a team lift Test PSI limit no greater than 30,000 Preferences: 2+ years' experience in manufacturing or other fast paced operations, preferred General computer knowledge (i.e. log on credentials (SSO), JD Edwards, and Microsoft Outlook) Program machines with high complexity, independently utilizing Mazatrol and G and M codes. Travel & Work Arrangements/Requirements: This position will be based at our site in Ivyland, PA no travel. What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . PandoLogic. Category:Manufacturing,
We are looking for motivated and detail-oriented individuals to join our team as Precision Manufacturing Technicians. This hands-on role is ideal for someone who enjoys working with their hands, solving problems, and learning technical processes. You'll receive on-the-job training to develop specialized skills in precision production using both manual and automated equipment.This position offers long-term growth potential in a structured, fast-paced environment where craftsmanship and consistency matter.Job Type: Full-time Pay: Starting at $16.00/ hr Shifts Available: Monday-Friday, 7:00 AM-3:30 PM Benefits Include: Health, Dental, and Vision Insurance Life Insurance 401(k) with company matching Paid Time Off Key Responsibilities Follow detailed work instructions, process sheets, and technical specifications Operate manual and CNC equipment for grinding, milling, and polishing tasks Inspect finished parts using precision measurement tools Troubleshoot issues that arise during production Optimize production efficiency while maintaining quality standards Document procedures and maintain accurate records of work performed Qualifications Associate's degree or 2+ years of relevant post-secondary education or training Strong understanding of mechanical concepts and basic math/geometry Excellent problem-solving skills High attention to detail and accuracy Self-motivated with a strong work ethic Ability to stand for long periods and lift up to 40 pounds Must pass a mechanical aptitude test, drug screen, and background check Preferred Experience Work or hobbies involving mechanical tools or systems (e.g., automotive, machining, electronics) Experience in production, manufacturing, or hands-on technical roles Roles that require careful attention to detail or precision work Demonstrated ability to troubleshoot and think critically under pressure This is a great opportunity for someone looking to build a career in a hands-on, skill-based environment. Prior experience in manufacturing is helpful but not required; training is provided for individuals with the right aptitude and mindset.
03/26/2026
Full time
We are looking for motivated and detail-oriented individuals to join our team as Precision Manufacturing Technicians. This hands-on role is ideal for someone who enjoys working with their hands, solving problems, and learning technical processes. You'll receive on-the-job training to develop specialized skills in precision production using both manual and automated equipment.This position offers long-term growth potential in a structured, fast-paced environment where craftsmanship and consistency matter.Job Type: Full-time Pay: Starting at $16.00/ hr Shifts Available: Monday-Friday, 7:00 AM-3:30 PM Benefits Include: Health, Dental, and Vision Insurance Life Insurance 401(k) with company matching Paid Time Off Key Responsibilities Follow detailed work instructions, process sheets, and technical specifications Operate manual and CNC equipment for grinding, milling, and polishing tasks Inspect finished parts using precision measurement tools Troubleshoot issues that arise during production Optimize production efficiency while maintaining quality standards Document procedures and maintain accurate records of work performed Qualifications Associate's degree or 2+ years of relevant post-secondary education or training Strong understanding of mechanical concepts and basic math/geometry Excellent problem-solving skills High attention to detail and accuracy Self-motivated with a strong work ethic Ability to stand for long periods and lift up to 40 pounds Must pass a mechanical aptitude test, drug screen, and background check Preferred Experience Work or hobbies involving mechanical tools or systems (e.g., automotive, machining, electronics) Experience in production, manufacturing, or hands-on technical roles Roles that require careful attention to detail or precision work Demonstrated ability to troubleshoot and think critically under pressure This is a great opportunity for someone looking to build a career in a hands-on, skill-based environment. Prior experience in manufacturing is helpful but not required; training is provided for individuals with the right aptitude and mindset.
Bowhead / UIC Technical Services
Dahlgren, Virginia
Overview Machinist (Engineering Technician IV) (EPFAB-2): Bowhead is seeking a qualified Machinist to join the Machine Shop team at the Naval Surface Warfare Center Dahlgren Division (NSWCDD) in Virginia. This position offers a unique opportunity to collaborate with the U.S. Navy in the development of prototypes and short-run production work, contributing to critical national defense projects. Our machinists are responsible for programming, setting up, and machining parts in accordance with Department of Defense (DoD) specifications and models. The role involves working with a wide range of materials, including aluminum, exotic steels, plastics, Inconel, and titanium. We provide self-help training on SolidWorks and CAMWorks, offering opportunities for continuous skill development and career advancement. Government-provided tools will be available to support your work. This intermediate to upper-level position requires a minimum of eight years of experience. The candidate must be able to fully understand DoD drawings including GD&T and have a proficient ability to program and operate CNC mills and lathes. They need the ability to work both independently and collaboratively within a team. There will be occasions when the machinist will be required to assist colleagues with programming or machining techniques. There may be a need to assist the shop lead with estimating time and material on certain projects. Bowhead offers: Engineering Technician IV position pays $38.39 per hour, plus $4.93 per hour for H&W (Health and Welfare) A total of 28 paid days off per year. (Described below) Paid vacation accrued up to 10 days a year. Paid sick leave accrued up to 7 days a year. Paid holidays 11 per year. Up to $175 for safety boots every two years. Up to $5250 for college tuition per year. Up to $5250 for training per year. Prescription safety glasses are provided yearly. Responsibilities Machinists are required to program and operate both CNC lathes/mills, set tools in the machines, and create fixtures to hold uniquely shaped parts/components. (Most of the equipment in the shop is either Haas, Fadal, or ProtoTraks and is used daily.) Must be able to comply with DoD drawings/models and hold tight tolerances on machined parts. Machinists will operate saws and occasionally use manual lathes and mills. They are expected to use standard measuring tools such as dial calipers and micrometers to inspect their parts. Qualifications Must have a high school diploma. Must have at least eight (8) years of professional experience programming and operating CNC milling machines and lathes. (Technical training may be considered as experience.) Must be able to draw and program using CAD/CAM software. Basic level skills in Microsoft Office software suite - Word, Excel, and Outlook. Have a great understanding of reading and interpreting Machinist drawings, including Geometric Dimensioning and Tolerancing (GD&T). Capable of using standard precision measuring tools such as dial calipers and micrometers to inspect in-process and completed parts. CMM experience is a plus. Ability to communicate effectively with all levels of employees, customers, and management and respond to instructions/assignments. Be willing to assist other employees with Machinist-related issues. i.e., programming and set-ups. Must be able to read, write, and speak English. Strong interpersonal skills and good judgment with the ability to work alone or as part of a team. Must be able to lift up to 75 pounds. Must be able to stand and walk for prolonged amounts of time. Must be able to twist, bend, and squat periodically. Physical Demands: Must be able to lift up to 75 pounds Must be able to stand and walk for prolonged amounts of time Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIRED: Must be able to obtain and maintain a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location. Acquiring a clearance will be done with the assistance of Bowhead upon hiring unless the candidate already possesses a clearance.
03/26/2026
Full time
Overview Machinist (Engineering Technician IV) (EPFAB-2): Bowhead is seeking a qualified Machinist to join the Machine Shop team at the Naval Surface Warfare Center Dahlgren Division (NSWCDD) in Virginia. This position offers a unique opportunity to collaborate with the U.S. Navy in the development of prototypes and short-run production work, contributing to critical national defense projects. Our machinists are responsible for programming, setting up, and machining parts in accordance with Department of Defense (DoD) specifications and models. The role involves working with a wide range of materials, including aluminum, exotic steels, plastics, Inconel, and titanium. We provide self-help training on SolidWorks and CAMWorks, offering opportunities for continuous skill development and career advancement. Government-provided tools will be available to support your work. This intermediate to upper-level position requires a minimum of eight years of experience. The candidate must be able to fully understand DoD drawings including GD&T and have a proficient ability to program and operate CNC mills and lathes. They need the ability to work both independently and collaboratively within a team. There will be occasions when the machinist will be required to assist colleagues with programming or machining techniques. There may be a need to assist the shop lead with estimating time and material on certain projects. Bowhead offers: Engineering Technician IV position pays $38.39 per hour, plus $4.93 per hour for H&W (Health and Welfare) A total of 28 paid days off per year. (Described below) Paid vacation accrued up to 10 days a year. Paid sick leave accrued up to 7 days a year. Paid holidays 11 per year. Up to $175 for safety boots every two years. Up to $5250 for college tuition per year. Up to $5250 for training per year. Prescription safety glasses are provided yearly. Responsibilities Machinists are required to program and operate both CNC lathes/mills, set tools in the machines, and create fixtures to hold uniquely shaped parts/components. (Most of the equipment in the shop is either Haas, Fadal, or ProtoTraks and is used daily.) Must be able to comply with DoD drawings/models and hold tight tolerances on machined parts. Machinists will operate saws and occasionally use manual lathes and mills. They are expected to use standard measuring tools such as dial calipers and micrometers to inspect their parts. Qualifications Must have a high school diploma. Must have at least eight (8) years of professional experience programming and operating CNC milling machines and lathes. (Technical training may be considered as experience.) Must be able to draw and program using CAD/CAM software. Basic level skills in Microsoft Office software suite - Word, Excel, and Outlook. Have a great understanding of reading and interpreting Machinist drawings, including Geometric Dimensioning and Tolerancing (GD&T). Capable of using standard precision measuring tools such as dial calipers and micrometers to inspect in-process and completed parts. CMM experience is a plus. Ability to communicate effectively with all levels of employees, customers, and management and respond to instructions/assignments. Be willing to assist other employees with Machinist-related issues. i.e., programming and set-ups. Must be able to read, write, and speak English. Strong interpersonal skills and good judgment with the ability to work alone or as part of a team. Must be able to lift up to 75 pounds. Must be able to stand and walk for prolonged amounts of time. Must be able to twist, bend, and squat periodically. Physical Demands: Must be able to lift up to 75 pounds Must be able to stand and walk for prolonged amounts of time Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIRED: Must be able to obtain and maintain a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location. Acquiring a clearance will be done with the assistance of Bowhead upon hiring unless the candidate already possesses a clearance.
